交换机配置文件
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
interface FastEthernet0/1
no ip address
duplex full
switchport mode access
speed 100
service-policy input cda_policy
storm-control multicast level bps 2m 1.8m storm-control broadcast level bps 1m 0.9m storm-control action trap
srr-queue bandwidth share 1 2 3 4
priority-queue out
!
interface FastEthernet0/1
no ip address
duplex full
switchport mode access
speed 100
service-policy input cda_policy
storm-control multicast level bps 2m 1.8m storm-control broadcast level bps 1m 0.9m storm-control action trap
srr-queue bandwidth share 1 2 3 4
priority-queue out
!
interface GigabitEthernet0/1
switchport mode access
no ip address
service-policy input cda_policy
storm-control multicast level bps 2m 1.8m storm-control broadcast level bps 1m 0.9m storm-control action trap
srr-queue bandwidth share 1 2 3 4
priority-queue out
!Uncomment the following two lines if using a 100FX SFP module on this interface (module must be present at the time of configuration) ! media-type sfp
! duplex full
! interface FastEthernet0/5
no ip address
duplex full
switchport mode access
speed auto
service-policy input cda_policy
storm-control multicast level bps 2m 1.8m storm-control broadcast level bps 1m 0.9m storm-control action trap
spanning-tree portfast
span bpduguard enable
srr-queue bandwidth share 1 2 3 4
priority-queue out
!
interface FastEthernet0/5
no ip address
duplex full
switchport mode access
speed auto
service-policy input cda_policy
storm-control multicast level bps 2m 1.8m storm-control broadcast level bps 1m 0.9m storm-control action trap
spanning-tree portfast
span bpduguard enable
srr-queue bandwidth share 1 2 3 4
priority-queue out
!
interface GigabitEthernet0/1
switchport mode access
no ip address
service-policy input cda_policy
storm-control multicast level bps 2m 1.8m storm-control broadcast level bps 1m 0.9m storm-control action trap
srr-queue bandwidth share 1 2 3 4
priority-queue out
!Uncomment the following two lines if using a 100FX SFP module on this interface (module must be present at the time of configuration) ! media-type sfp
! duplex full
!