生产设备技术参数对照表(最新版)
榨油机技术参数表(打印版)
Φ80mm
70-80r/min
60-90 r/min
Φ62mm
Φ82mm
Y132S-42.2KW
Y132M2-65.5KW
2X-2·0.37KW
2X-4·0.55KW
2.3KW
3KW
30-80kg/h
80-150 kg/h
630kg
780kg
1300×1050×1650 1500×1200×1700
Φ100mm 40-60 r/min
Φ102mm Y132M-47.5KW 2X-8A·1.1KW
4.5KW 200-250 kg/h
1000kg 2000×1210×1700
出油率（%） 42-55
饼厚（mm） 1.0-1.5
干饼残油率（%） ≤7
花生
40-50
0.8-2
≤8
油菜籽
28-38
1.0-1.5
一、D-1683 型、D-1685 型、D-1688 型冷热两用螺旋榨油机
主要技术参数及性能：
（一）技术参数：
型号 参数 号
项目
D-1683 型
D-1685 型
D-1688 型
8
榨螺直径
榨螺转速
榨膛内接园直径
配
主机
用 真空泵
动
力
加热器
处理量
整机重量 外形尺寸（mm）
（二）榨油性能：
参数 原料
芝麻
Φ60mm
全韩式液压多功能香油机 6YZ-240
7kg 350-500t/10h
6YZ-280
11kg 380-520t/10h
3
出油率 5.剥壳精选多用机
转速 剥壳效率
设备技术需求参数表精选全文
执法工具箱
笔记本
电脑
★型：不低于Intel 酷睿i5 2520M
★CPU速度：不低于2.5 GHz
★内存容量：不小于4G
硬盘容量：不小于500G
★显示器：12-12.5英寸，屏幕比例16：9，物理分辨率不低于1366×768
整体存储
支持本地硬盘存储、服务器存储、客户端存储，能同时保存GPS数据、录像数据、音频数据、报警数据
传输费用
★配套无线3G网卡及1年上网费用，每月上网流量：公网不低于1G，专网不低于1G
车载照明
灯管使用寿命不低于5000小时
★额定电压：DC12V
★光通量不低于10000lm；照射有效射程不低于1000米，采用飞利浦光源、电器
USB数量：≥5个，前面板2个，内部1个，后部2个
操作系统：服务器含windows server2008操作系统
★可管理和维护性 :
1. 对CPU、内存、硬盘驱动器、电源及风扇等关键部分的潜在的故障具有提前预警能力； 2.故障部件的快速诊断功能 ： 在断电的情况下，能够通过诊断板快速定位故障的部件，提高维修速度。
线性PCM录音模式不低于6小时
存储容量：不低于4G
执法箱
手提式设备箱，箱体骨架、边框及转角采用铝合金
箱体夹层采用多层板
箱体内衬采用黑色硬质防震EVA海绵，根据放入设备尺寸大小在海绵上开槽以固定设备
采用挂钩锁；现场展示样品
执法箱用来放置环境监察执法工具，包括笔记本电脑、便携式打印机、数码摄像机、扫描棒、录音笔，可有效预防执法工具在运输、贮存过程中的被破坏事件的发生。
标配硬盘容量：配置4块300GB 1.5万转 3.5英寸热插拔硬盘纠错，最大硬盘容量不低于16TB，，
生产设备技术参数对照表(最新版)
12× 10cm
異常最大工 作台面尺寸
45× 58cm 最多孔位 12.5× 20.3cm 孔位尺寸
150g(同紋),大于150g需啤線. 紙張厚 度上限 1.5cm
最大包 本厚度
4cm 1.57" 0.3cm
4X4 mm
4X4 mm
孔位距 離尺寸
4 mm
4 mm
正常紙張 厚度范圍 最高速度 正常生 產速度
設備編號 機種型號 最大尺寸 (本) 淨寬
設備編35 機種型號 最大包 本尺寸 最小包 本尺寸 最大封 面尺寸 最小封 面尺寸 BBY40/5B
設備編號 機種型號 正常最大工 作台面尺寸
45x27cm
最小尺寸 (本) 淨寬
最大裁 切深度 正常最小 裁切深度 異常最小 裁切深度 (需拆壓 板） 裁切厚 度上限
0.1 - 8 mm 1000本/H 800本/H
0.1 - 8 mm 1000本/H 800本/H
特別 功能
1.雙聯分紙; 2.針孔線; 3.可壓折痕線;
1.雙聯分紙; 2. 針孔線
分紙 針孔線
備注
特別功能
備注
正常情況下﹐封 面的天頭尺寸要 比內文的天頭尺 寸大2mm,以防膠 水溢出等不良。
特別功能
HN印刷有限公司 釘裝科主要生產設備技朮參數對照表
生效日期 : 2013 -11 -20 設備 名稱 設備 編號 機種 型號 最大紙 張尺寸 正常最 小紙張 尺寸 異常最 小紙張 尺寸 自 動 摺 書 機 WN-BDPM-1001 T52.3/4 52× 84cm 20.47× 33.07" 12× 18cm 4.72× 7.08" 10× 18cm 3.94× 7.08" WN-BD-PM1002#1006 KD78.1/4 KLL - FD 78× 116cm 30.7× 45.66" 15× 20cm 5.91× 7.87" 12× 18cm 4.72× 7.08" 半自動折書機 WN-BDPM-1003 MULTIPLI 354 32× 45cm 12.59× 17.72" 7× 12cm 2.75× 4.72" 5× 12cm 1.97× 4.72" WN-BDPM-1025 HB382 38× 45cm 14.96× 17.72" 9× 9cm 3.54× 3.54" 5× 7cm 1.97× 2.76" 書釘最 大距離 10.63" 6cm(小釘頭) 120g(橫紋) 4梳+4梳 摺頁 功能 最高 速度 正常生 常速度 7000pcs/H 可折對折 或風琴折 四梳三刀 四梳 刀需折十字型 200m / min 6000pcs/H 2梳+2梳 折風琴/順對折﹐不 可折+字/荷包折 130m / min 8000pcs/H 釘書最 大厚度 最高 速度 正常生 常速度 書釘最 小距離 2.4" 8cm(大釘頭） 3.2" 0.5cm 8000pcs/H 4500本/H 書脊尺寸小于18cm 或所有風琴折的書 貼都需留飄口（飄 口正常尺寸 8mm, 最小5mm);做拉頁 的說明書,一般情 況下封面最少需比 內頁少1mm(特殊 情況按客戶要求). 0.3cm 380次/min 1100本/H 最大台 面深度 最高裁 切速度 正常生 常速度 0.6" 9.4" 設備名稱 自動騎釘龍 WN-BDPM-1005 1509 36× 30cm 14.17× 11.81" 14× 9cm 5.51× 3.54" 27cm 半自動 釘書機 WN-BD-PM1004#1007 SC101 30× 25cm 11.81× 9.84" 8× 6cm 3.14× 2.36" 2.4cm 設備名稱 切紙機 WS-BDPM-1001 TIGER1160D 116cm 45.66" 116cm 45.66" 10.2cm 4.0" 2.6cm 1.0" 16cm 6.3" 186cm 73.22" 26次/分鐘 120刀 / H 最高速度 正常生 常速度 最小包 本厚度 0.12" 1800本/H 900本/H 設備名稱 圓盤包 本機 設備名稱 電動線圈 收口機 WN-BDPM-1030 SKJ-600/24mm 58X22cm 22.8X8.6" 60X24cm 23.6X9.4" 30個 紙制品 沖孔機 WN-BDPM-1029 CK600A 25.4X50.8cm 10X20" 33X61cm 13X24" 30個
设备技术参数响应对照表第一标段
二、设备技术参数响应对照表（第—标段）5、 网络中央控制：（自带操作系统）远程控制、接管、互动， 教学教务、设备管理及实时数据采集；远程安防监控及设备 布防：可对主要设备进行防盗布防，当有人非法开启或偷卸 投影机或触摸一体机时，总控软件会提醒报警；6、 封闭式接口： 国标电源（IN ）*1/（ OUT *2，VGA*3, HDM （OUT *1，USB*6, RJ45（ IN ）*1/（ OUT *2，RS232*1，3.5mmMIC （IN ）*1，3.5mm 音频输出*1,无源音箱接驳*2组，布防*2 ；7、 移动互动教学控制：多功能移动控制器有激光教鞭、 2.4G 无线话筒（可配头戴式耳机）及信号切换、 PPT 翻页、话筒 音量调节功能，终端带有封闭的充电插座； 8远程信息发布：可在总控端或远程监控端向任意一个教室 发布消息并可交流。
9、 实时数据采集：（1）对任一授课教师每节课实时上下课 时间及一学期累计时间； （2）对设备使用或投影灯泡累计时 间，重点设备使用时间累计； （3）可对任一教师任一上课内 容及上课场景；进行实时数据采集、保存、上传。
10、 互动授课系统：无线移动教学功能：大小屏互动，支持 老师走下讲台，老师手持平板或手机就可以在教室内控制大 屏，与大屏互动实现无线互动教学；软件互动授课功能：互 动授课功能是老师可以在安卓端互动界面进仃书与等操作冋 步显示到大屏，含有互动授课功能和同步 PPT 功能，且支持 双屏同步双向批注、擦除、及常规教学工具应用等功能；PPT 演示模式：可远程操作播放PPT ,并可将大屏上的 PPT 加载到移动终端上进行同步显示，另外还可以实现上下翻页、任 意页面预览等功能；即拍即传：可一键对试卷、课本等实物进行拍摄，将实物照片一键上传至大屏并自动打开，结合互5、 网络中央控制：（自带操作系统）远程控制、接管、互动， 教学教务、设备管理及实时数据采集；远程安防监控及设备 布防：可对主要设备进行防盗布防，当有人非法开启或偷卸 投影机或触摸一体机时，总控软件会提醒报警；6、 封闭式接口：国标电源（IN ） *1/ （ OUT *2 , VGA*3, HDM ；（OUT *1 , USB*6, RJ45（ IN ） *1/ （OUT *2 , RS232*1,3.5mmMI （（IN ） *1 , 3.5mm 音频输出*1,无源音箱接驳*2组，布防*2 ；7、 移动互动教学控制：多功能移动控制器有激光教鞭、2.4G无线话筒（可配头戴式耳机）及信号切换、PPT 翻页、话筒音量调节功能，终端带有封闭的充电插座；8、 远程信息发布：可在总控端或远程监控端向任意一个教至 发布消息并可交流。
工厂设备型号与技术参数
140 140 140 140 140 200 200 350 200 2255
320 320 420 320 320 420 420 550 500 710
2418x1000x1267 2418x1037x1312 2668x1130x1367 2418x1000x1267 2418x1037x1312 2910x1440x1450 3660x1440x1450 5970x2050x1650 3650x1550x1750 8000x3000x1620
2556x2159x2298 2272x1770x2094 2550x2820x2010
机重 3500 11000
2500×1060×2655 3730×1400×3790
主轴直径/mm 镗床 262Γ T68 TPX6111B 85 110 最大磨削 直径/mm 315 320
最大镗孔直径/mm
240
2100×1740×1615 2225x1810x1740
6H83(X53K/1)
XA5032 FA5A-U
Z3050(Z3040)
钻床
Z3080 Z30100
1600×400 320×1250 2000x450 最大钻孔 直径/mm 50 80 100
30-500 450 900/880 315/300 385/365 60-430 350 700／680 255／240 370／350 115－575 90-500 主轴箱水平 摇臂升降距离 主轴圆锥孔 主轴端面至 主轴轴线至 主轴行程 底座面距离 立柱表面距离 移动距离 320~1220 350~1600 315 1250 580 5# 550~2000 500~2500 450 2000 1000 6# 750~2500 570~3150 500 工作台行程/mm 纵向 横向 1140 1100 最大磨削 孔深/mm 125 850 900 磨削孔径 范围 13~125 工作台 载荷量/kg 最大镗孔深度 台面尺寸 2000 13000 600 1000×800 1100×960
设备性能参数表
辛安/柴沟原煤筛
康威德
香蕉筛
1860
450-500
13
冯西/北祖原煤筛
康威德
香蕉筛
2460
800
50
崔家垴原煤筛
奥瑞
香蕉筛
筛分车间
2460
700
50
昊兴塬原煤筛
康威德
香蕉筛
筛分车间
2、原煤脱泥筛类：
规格
最大通过能力
筛板孔径
代表选煤厂
生产厂家
类型
备注
1836
300-400
2
冯西/北祖脱泥筛
康威德
水平筛
2460
400
2
冯西/北祖二期脱泥筛
康威德
水平筛
3048
400-500
2
辛安/柴沟脱泥筛
康威德
水平筛
3060
500
1
昊兴塬脱泥筛
康威德
水平筛
4373
700
2/1.2
崔家垴脱泥筛
奥瑞
水平筛
3、高频筛类
规格
最大通过能力
筛板孔径
代表选煤厂
生产厂家
类型
备注
1836
30-40
0.35
冯西/北祖二期高频筛
康威德
FZJ-600
600
150
200-240
120-180
20
40
0.06-0.10
150-220
50-75
FZJ-500
500
124
160-200
80-120
20
25
0.05-0.10
120-180
40-60
甲醇厂设备技术参数一览表
ID800×2152
操作压力：6.2Mpa；操作温度：90～125℃;
处理量：16.7kg/s;最大压降：0.02Mpa；过滤精度：5μm
17
S-1303
蒸汽过滤器
ID400×1625
操作压力：5.0Mpa；操作温度：420℃;
2
A-1302
加药搅拌器
转速：160rpm:功率：0.75kw;叶轮直径：220mm
3
C-1301
合成气洗涤塔
ID2600×9770立式
全容积：58m3；操作温度：220～230℃；操作压力：3.76～4.05MpaG；
设计温度：260℃；设计压力：4.4MpaG；
4
F-1301
气化炉
ID2756×14474
离心式
操作介质：烧嘴冷却水；操作温度：105℃；
流量：78.2m3/h；扬程：92.5m;电机功率：45kw
12
P-1303A/B
激冷水泵
离心式
操作介质：黑水；操作温度：204℃；
流量：240m3/h；扬程：107m;电机功率：132kw
13
P-1304A/B
渣锁斗循环泵
离心式
操作介质：黑水；操作温度：115℃；
流量：40m3/h；扬程：21.5m;电机功率：11kw
14
P-1305A/B
加药泵
计量泵
操作介质：水磷酸盐；操作温度：25℃；流量：0.13m3/h；压差：7.84Mpa；电机功率：1.1kw
15
气化管道泵
流量：200m3/h；扬程：32m;转速：1450rpm/min;电机功率：30kw
16
S-1302A/B
3
生产部主要生产设备技术参数
生产部有关设备技术参数1、主提升绞车（滚筒直径2m以上）:滚筒直径（mm）；绳速（m/s）；钢丝绳直径（mm）;静张力（KN）;静张力差（KN）2、水泵：级数（级）；流量（m3/s）;扬程（m）3、压风机：风量（m3/min）;风压（Mpa）4、主要扇风机：风量（m3/min）;负压（pa）5、运输绞车（滚筒直径2m以下）：滚筒直径（mm）；绳速（m/s）；钢丝绳直径（mm）6、无极绳绞车：牵引力（KN）;安装长度（m）；运行速度（m/s）;安装角度（°）；7、架空乘人装置：安装长度（m）；安装角度（°）；运行速度（m/s）;乘人数（人）8、斜井助行器：安装长度（m）；运行速度（m/s）;安装角度（°）；8、卡轨车：牵引力（KN）；轨距（mm）; 速度（m/s）；9、单轨吊：起吊重量（t）；使用电压（V）10、架线电机车：轨距（mm）;粘重（t）；使用电压（V）11、蓄电池电机车：轨距（mm）;粘重（t）；使用电压（V）10、人车：轨距（mm）;运行角度（°）；乘人数（人）12、矿车：轨距（mm）;装载量（t）13、内齿轮绞车：速度（m/s）；钢丝绳直径（mm）14、回柱绞车（慢速绞车）：牵引力（t）；绳速（m/s）；钢丝绳直径（mm）15、带式输送机：运量（t/h）;带宽（mm）；带速（m/s）；安装长度（m）；驱动装置数（个）16、刮板输送机：运量（t/h）; 槽宽（mm）；链速（m/s）；安装长度（m）17、装岩机：装岩量：（t/h）;耙斗容积（m3）;18、局部扇风机：电压（V）；风量（m3/min）;风压（Mpa）19、喷浆机：输出量（t/h）；电压（V）；20：高压开关柜：主回路电压（KV）；电流（A）21、低压开关柜：电压（V）；电流（A）其中励磁柜：励磁电压（V）；励磁电流（A）22、高压防爆开关：主回路电压（KV）；电流（A）23、低压防爆开关：电压（V）；电流（A）24、普通变压器：容量（KVA）；一次电压（KV），二次电压（V）25、主变压器：容量（KVA）；一次电压（KV），二次电压（KV）26、普通电动机：电压（v）；电流（A）；极数27、高压电动机：电压（Kv）；电流（A）；极数28、直流电动机：电枢电压（v）；电枢电流（A）；定子电压（v）；定子电流（A）；29、高压断路器：主回路电压（KV）；29、同步电动机：励磁电压（v）；励磁电流（A）；定子电压（v）；定子电流（A）；注：液压支架等由装备中心提供。
主要设备规格及技术参数
主要设备规格及技术参数在工业生产的各个领域，都需要用到各种各样的设备进行生产、制造或处理。
这些主要设备的规格和技术参数是生产过程中必须要了解的内容，以便于选择正确的设备，保证生产效率和产品质量。
本文将主要介绍几种常见的主要设备的规格及技术参数。
1. 机床机床是工厂中非常常见的一种设备，用于加工工件和制造零件。
常见的机床有车床、铣床、钻床、刨床等。
机床的规格和技术参数主要包括其工作台面积、主轴转速、工作行程、机床重量等。
车床车床是最常见的机床之一，主要用来加工各种轴类、盘类、套类、孔类等工件。
车床的规格和技术参数如下：•工作台面积：500mm x 1000 mm•主轴转速：20-2500转/分•工作行程：250 mm•重量：5000 kg铣床铣床是一种用铣刀对工件进行加工和切削的机床。
铣床的规格和技术参数如下：•工作台面积：1200mm x 500 mm•主轴转速：50-5000转/分•工作行程：700 mm•重量：3000 kg钻床钻床是一种用来钻孔和扩孔的机床。
钻床的规格和技术参数如下：•工作台面积：1000mm x 500 mm•主轴转速：50-2500转/分•工作行程：200 mm•重量：2000 kg2. 压力容器压力容器是一种用来存放、运输或处理物质，且容器内压力大于环境压力的容器。
常见的压力容器包括锅炉、储气罐、储罐等。
压力容器的规格和技术参数主要包括其容量、工作压力、材料等。
锅炉锅炉是一种用来把水加热为蒸汽，并把热能转化为机械能或供热的设备。
锅炉的规格和技术参数如下：•容量：5000 kg/h•工作压力：1.0 MPa•材料：Q235B储气罐储气罐是用于存储气体的容器。
储气罐的规格和技术参数如下：•容量：10 m3•工作压力：1.6 MPa•材料：Q345R储罐储罐是一种用来储存液体或气体的容器。
储罐的规格和技术参数如下：•容量：50 m3•工作压力：0.8 MPa•材料：304不锈钢3. 泵泵是一种用来输送液体或气体的设备，常见的泵有离心泵、排污泵、螺杆泵等。
机械设备的技术性能和最大生产能力
规格型号 22m3
定额功率 300KW
定额电流 541A
定额频率 50HZ
定额电压 400/230V
相数 3
公称容积流量 22m /min
3
额定排气压力 0.8Mpa
转速 400r/min
主要机械设备的主要技术指标和最大生产能力统计表
一、ZLC40装载机 设备名称 装载机 二、推土机 设备名称 推土机 三、挖掘机 设备名称 挖掘机 四、内燃空压机 设备名称 内燃空压机 五、内燃发电机 设备名称 内燃空压机 六、电动空压机 设备名称 电动空压机 规格型号 L-22m
3
规格型号 ZLC40
生产能力 60m /h
3
斗容量 1.8m
3
最小旋转半径 9m
规格型号 STW-220
生产能力 100m /h
3
最小旋转半径 5m
规格型号 PC200-2
生产能力 50m3/h
斗容量 0.8m3
最小旋转半径 9m
规格型号 12m3
公称容积流量 12m3/min
额定排气压力 0
GCS、GCK、MNS、GGD主要技术参数的对照表
GCS、GCK、MNS、GGD主要技术参数的对照表产品型号规格及柜型宽×深分断能力kA 水母排安装方式水平电流母线垂直电流母线抽屉电流母线Max 1/2抽屉电流Max 防护等级符合标准出线方式进线柜电容柜MCC 外壳内部GCK 800×1000 800×1000 600×1000 50 顶部串联式3150 1000 400 －－IP30 ZBK36001-89 背后GCS 800×800 800×800 1000×800 50 背面安装4000 1000 400 40 IP40 IP20 IEC439 GB7251.1 旁出MNS 800×1000 800×1000 1000×1000 50 背面安装4000 1000 400 60 IP40 IP20 IEC439 GB7251.1 旁出产品型号互换性联锁位置固定与抽出混装方式抽屉推进式抽屉间隔安装方式1/2抽屉选用灵伙性1/2抽屉星三角接二次最大安装回路数垂直排大抽屉1/2抽屉GCK 差－－无可以左右－－－－－－16 三相GCS 良好良好不明显可以旋转不可以局限不可以20 三相MNS 良好良好不明显可以联锁不可以局限可以20 三相四线产品型号抽屉结构抽屉回路数MCC 操作位置大抽屉1/2抽屉大抽屉1/2抽屉进线柜电容柜大抽屉1/2抽屉GCK 金属材料－－9 －－4200 4300 9500 －－－－GCS 金属材料工程塑料11 22 4200 4300 18000 22400 偏下MNS 金属材料工程塑料9 18 4200 4300 17000 31400 偏下在3C强制性认证试验样柜的要求:GCK (森源)最小抽屉单元一模数:GCS最小抽屉单元1/2模数,MNS(进口ABB技术)最小抽屉单元1/4模数,。
机器设备各项参数参考表
通用设备经济寿命年限参考表专用设备经济寿命年限参考表注：1.根据设备单价的大小及其体积重量及所处地区交通条件选定具体费率。
单价高、体积小、重量轻、交通方便地区的取低值，反之取高值。
2.特殊情况或用空运等可按实估算。
人民币存贷款利率调整表2011年4月6日表一机动车总成、部件价值权分参考表（英文版）Two regulations promulgated for implementation is in the party in power for a long time and the rule of law conditions, the implementation of comprehensive strictly strategic plan, implementation in accordance with the rules and discipline to manage the party, strengthen inner-party supervision of major initiatives. The two regulations supporting each other, the < code > adhere to a positive advocate, focusing on morality is of Party members and Party leading cadres can see, enough to get a high standard; < rule > around the party discipline, disciplinary ruler requirements, listed as "negative list, focusing on vertical gauge, draw the party organizations and Party members do not touch the" bottom line ". Here, the main from four square face two party rules of interpretation: the first part introduces two party Revised regulations the necessity and the revision process; the second part is the interpretation of the two fundamental principles of the revision of laws and regulations in the party; the third part introduces two party regulations modified the main changes and needs to grasp several key problems; the fourth part on how to grasp the implementation of the two regulations of the party. < code > and < Regulations > revised the necessity and revised history of the CPC Central Committee the amendment to the Chinese Communist Party members and leading cadres honest politics several guidelines > and < Chinese Communist Party discipline and Punishment Regulations > column 1 by 2015 to strengthenparty laws and regulations focus. Two party regulations revision work lasted a Y ears, pooling the wisdom of the whole party, ideological consensus, draw historical experience, respect for the wisdom of our predecessors, which reflects the unity of inheritance and innovation; follow the correct direction, grasp the limited goals, adhere to the party's leadership, to solve the masses of the people reflect a focus on the problem. The new revision of the < code > and < rule >, reflects the party's 18 and the eighth session of the third, the spirit of the fourth plenary session, reflecting the experience of studying and implementing the General Secretary Xi Jinping series of important speech, reflects the party's eighteen years comprehensive strictly practice. (a) revised two regulations of the party need of < the ICAC guidelines > in < in 1997 Leaders as members of the Communist Party of China clean politics certain criteria (Trial) > based on revised, the promulgation and implementation of January 2010, to strengthen the construction of the contingent of leading cadres play an important role. But with the party to manage the party strictly administering the deepening, has not been able to fully meet the actual needs. Content is too complicated, "eight prohibition, 52 are not allowed to" hard to remember, and also difficult to put into practice; the second is concisely positive advocated by the lack of prohibited provisions excessive, no autonomy requirements; the third is banned terms and discipline law, both with the party discipline, disciplinary regulationsrepeat and Criminal law and other laws and regulations repeat; the fourth is to "clean" the theme is not prominent, not for the existing problems, and is narrow, only needle of county-level leading cadres above. < rule > is in 1997 < Chinese Communist Party disciplinary cases (Trial) > based on revision, in December 2003 the promulgation and implementation, to strengthen the construction of the party play very important role. Along with the development of the situation, which many provisions have been unable to fully meet the comprehensive strictly administering the practice needs. One is Ji law, more than half of the provisions and criminal law and other countries laws and regulations Repetition; two is the political discipline regulations is not prominent, not specific, for violation of the party constitution, damage the authority of Party Constitution of misconduct lack necessary and serious responsibility to pursue; third is the main discipline for the leading cadres, does not cover all Party members. Based on the above situation, need to < the criterion of a clean and honest administration > and < rule > the two is likely to be more relevant regulations first amendment. By revising, really put the authority of Party discipline, the seriousness in the party tree and call up the majority of Party members and cadres of the party constitution of party compasses party consciousness. (II) two party regulations revision process the Central Committee of the Communist Party of China attaches great importance to two regulations revision . Xi Jinping, general books recorded in the FifthPlenary Session of the eighth session of the Central Commission for Discipline Inspection, on the revised regulations < > made clear instructions. According to the central deployment, the Central Commission for Discipline Inspection from 2014 under six months begin study two regulations revision. The Standing Committee of the Central Commission for Discipline Inspection 4 review revised. Comrade Wang Qishan 14 times held a special meeting to study two regulations revision, amendment clarifies the direction, major issues of principle, path and target, respectively held a forum will listen to part of the province (area) secretary of the Party committee, Secretary of the Discipline Inspection Commission, part of the central ministries and state organs DepartmentThe first party committee is mainly responsible for people, views of experts and scholars and grassroots party organizations and Party members. Approved by the Central Committee of the Communist Party of China, on 7 September 2015, the general office of the Central Committee of the Party issued a notice to solicit the provinces (autonomous regions, municipalities) Party, the central ministries and commissions, state ministries and commissions of the Party (party), the General Political Department of the military, every 3 people organization of Party of two regulations revision opinion. Central Commission for Discipline Inspection of extensive solicitation of opinions, careful study, attracting, formed a revised sent reviewers. In October 8 and October 12, Central Committee PoliticalBureau Standing Committee and the Political Bureau of the Central Committee After consideration of the two regulations revised draft. On October 18, the Central Committee of the Communist Party of China formally issued two regulations. Can say, two laws amendment concentrated the wisdom of the whole party, embodies the party. Second, < code > and < Regulations > revision of the basic principles of two party regulations revision work and implement the party's eighteen, ten eight plenary, the spirit of the Fourth Plenary Session of the Eleventh Central Committee and General Secretary Xi Jinping important instructions on the revised < low political criterion > and < Regulations >, highlighting the ruling party characteristics, serious discipline, the discipline quite in front of the law, based on the current, a long-term, advance as a whole, with Bu Xiuding independent < rule > and < rule >. Main principle is: first, adhere to the party constitution to follow. The constitution about discipline and self-discipline required specific, awaken the party constitution of party compasses party consciousness, maintaining the authority of the constitution. General Secretary Xi Jinping pointed out that "no rules, no side round. Party constitution is the fundamental law, the party must follow the general rules. In early 2015 held the eighth session of the Central Commission for Discipline Inspection Fifth Plenary Session of the 16th Central Committee, Xi Jinping again pointed out that constitution is the party must follow the general rules, but also the general rules." the revisionof the < code > and < rule > is Method in adhere to the regulations established for the purpose of combining rule of virtue is to adhere to the party constitution as a fundamental to follow, the constitution authority set up, wake up the party constitution and party rules the sense of discipline, the party constitution about discipline and self-discipline specific requirements. 4 second is to adhere to in accordance with the regulations governing the party and the party. The Party of rule of virtue "de", mainly refers to the party's ideals and beliefs, excellent traditional style. The revised the < code > closely linked to the "self-discipline", insisting on the positive initiative, for all members, highlight the "vital few", emphasized self-discipline, focusing on the morality, and the majority of Party members and the ideological and moral standards. The revised < > Ji method separately, Ji, Ji Y an to Method, as a "negative list", emphasizing the heteronomy, focusing on vertical gauge. Is this one high and one low, a positive reaction, the strict party discipline and practice results transformation for the integration of the whole party to observe moral and discipline requirements, for the majority of Party members and cadres provides benchmarking and ruler. Third, insist on to. In view of the problems existing in the party at the present stage, the main problems of Party members and cadres in the aspect of self-discipline and abide by the discipline to make clearly defined, especially the party's eighteen years strict political discipline and political rules, organization and discipline andto implement the central eight provisions of the spirit against the four winds and other requirements into Disciplinary provisions. Not one pace reachs the designated position, focusing on in line with reality, pragmatic and effective. After the revision of major changes, major changes in the < code > and < rule > modified and needs to grasp several key problems (a) < code > < code > adhere to according to regulations governing the party and party with morals in combination, for at the present stage, the leadership of the party members and cadres and Party members in existing main problems of self-discipline, put forward principles, requirements and specifications, showing Communists noble moral pursuit, reflected at all times and in all over the world ethics from high from low 5 common requirements. One is closely linked to the "self-discipline", removal and no direct relation to the provisions of . the second is adhere to a positive advocate, "eight prohibition" 52 are not allowed to "about the content of the" negative list moved into synchronization amendment < cases >. Three is for all the party members, will apply object from the leadership of the party members and cadres to expand to all Party members, fully embodies the comprehensive strictly required. The fourth is prominent key minority, seize the leadership of the party members and cadres is the key, and put forward higher requirements than the ordinary Party members. Five is to simplify, and strive to achieve concise, easy to understand, easy to remember. The revised < code > is the ruling Party since the first insists ona positive advocate forAll Party members and the self-discipline norms, moral declaration issued to all members of the party and the National People's solemn commitment. > < criterion of a clean and honest administration consists of 4 parts, 18, more than 3600 words. After the revision of the < code >, a total of eight, 281 words, including lead, specification and Party member cadre clean fingered self-discipline norms, etc. Part 3 members low-cost clean and self-discipline, the main contents can be summarized as "four must" "eight code". Lead part, reiterated on ideal and faith, fundamental purpose, the fine traditions and work style, noble sentiments, such as "four must" the principle of requirements, strong tone of self-discipline, The higher request for 6 and supervised tenet, the foothold in permanent Bao the party's advanced nature and purity, to reflect the revised standards requirements. Members of self-discipline norms around the party members how to correctly treat and deal with the "public and private", "cheap and rot" thrifty and extravagance "bitter music", put forward the "four norms". Party leader cadre clean fingered self-discipline norms for the leadership of the party members and cadres of the "vital few", around the "clean politics", from civil servant of the color, the exercise of power, moral integrity, a good family tradition and other aspects of the leadership of the party members and cadres of the "four norms" < > < norm norm. "The Party member's self-discipline norms" and "party members and leading cadre clean fingered self-discipline norms," atotal of eight, collectively referred to as the "eight". "Four must" and "eight" of the content from the party constitution and Party's several generation of leaders, especially Xi Jinping, general secretary of the important discussion, refer to the "three discipline and eight points for attention" statements, and reference some embody the Chinese nation excellent traditional culture essence of epigrams. (2) the revised regulations, the main changes in the revised Regulations > to fully adapt to the strictly requirements, reflects the according to the regulations governing the law of recognition of deepening, the realization of the discipline construction and Jin Ju. < rule > is party a ruler, members of the basic line and follow. And the majority of Party members and cadres of Party organizations at all levels should adhere to the bottom line of thinking, fear discipline, hold the bottom line, as a preventive measure, to keep the party's advanced nature and purity. 1, respect for the constitution, refinement and discipline. Revised < rule > from comprehensive comb physical constitution began, the party constitution and other regulations of the Party of Party organizations and Party discipline requirements refinement, clearly defined in violation of the party constitution will be in accordance with regulations to give the corresponding disciplinary action. The original 10 categories of misconduct, integration specification for political discipline, discipline, honesty and discipline masses Ji Law and discipline and discipline and other six categories, the content of < rule >real return to Party discipline, for the majority of Party members and listed a "negative list. 7 2, highlighting the political discipline and political rules. > < Regulations according to the stage of the discipline of outstanding performance, emphasizing political discipline and political rules, organization and discipline, in opposition to the party's leadership and the party's basic theory, basic line, basic program and basic experience, the basic requirement of behavior made prescribed punishment, increase the cliques, against the organization such as violation of the provisions, to ensure that the central government decrees and the Party of centralized and unified. 3, adhere to strict discipline in the law and discipline In front, Ji separated. Revised < Regulations > adhere to the problem oriented, do Ji separated. Any national law existing content, will not repeat the provisions, the total removal of 79 and criminal law, repeat the content of the public security management punishment law, and other laws and regulations. In the general reiterated that party organizations and Party members must conscientiously accept the party's discipline, die van comply with national laws and regulations; at the same time, to investigate violations of Party members and even criminal behavior of Party discipline and responsibility, > < Regulations distinguish five different conditions, with special provisions were made provisions, so as to realize the connection of Party discipline and state law. 4, reflect Wind building and anti-corruption struggle of the latest achievements. < rule > the party's eighteen yearsimplement the spirit of the central provisions of the eight, against the requirements of the "four winds" and transformation for disciplinary provisions, reflecting the style construction is always on the road, not a gust of wind. In the fight against corruption out of new problems, increase the trading rights, the use of authority relatives profit and other disciplinary terms. Prominent discipline of the masses, the new against the interests of the masses and ignore the demands of the masses and other disciplinary terms and make provisions of the disposition and the destruction of the party's close ties with the masses.Discipline to protect the party's purpose. 8 of these regulations, a total of three series, Chapter 15, 178, more than 24000 words, after the revision of the regulations a total of 3 series, Chapter 11, 133, 17000 words, divided into "general" and "special provisions" and "Supplementary Provisions" Part 3. Among them, add, delete, modify the provisions of the proportion of up to nearly 90%. 1, the general general is divided into five chapters. The first chapter to the regulations of the guiding ideology, principles and scope of application of the provisions, highlight the strengthening of the party constitution consciousness, maintenance the authority of Party Constitution, increase the party organizations and Party members must abide by the party constitution, Y an Centralized centralized, would examine at all levels of the amended provisions implementing and maintaining Party discipline, and consciously accept the party discipline,exemplary compliance with national laws and regulations. The second chapter of discipline concept, disciplinary action types and effects of the regulations, will be a serious warning from the original a year for a year and a half; increase the Party Congress representative, by leaving the party above (including leave probation) punishment, the party organization should be terminated its representative qualification provisions. The third chapter of the disciplinary rules of use prescribed in the discipline rectifying process, non convergence, not close hand classified as severely or heavier punishment. "Discipline straighten "At least eighteen years of five years, these five years is to pay close attention to the provisions of the central eight implementation and anti -" four winds ". The fourth chapter on suspicion of illegal party disciplinary distinguish five different conditions, with special provisions were made provisions, to achieve effective convergence of Party and country 9 method. < rule > the provisions of Article 27, Party organizations in the disciplinary review found that party members have committed embezzlement, bribery, dereliction of duty dereliction of duty and other criminal law act is suspected of committing a crime shall give cancel party posts, probation or expelled from the party. The second is < Regulations > Article 28 the provisions of Party organizations in the disciplinary review But found that party members are stipulated in the criminal law, although not involved in a crime shall be investigated for Party discipline and responsibility shouldbe depending on the specific circumstances shall be given a warning until expelled punishment. This situation and a difference is that the former regulation behavior has been suspected of a crime, the feeling is quite strict, and the latter for the behavior not involving crime, only the objective performance of the provisions of the criminal code of behavior, but the plot is a crime to slightly. < Regulations > the 29 provisions, Party organizations in the discipline review found that party members and other illegal behavior, affect the party's image, the damage to the party, the state and the people's interests, we should depend on the situation Seriousness given disciplinary action. The loss of Party members, seriously damaging the party's image of behavior, should be given expelled from the party. At this article is party member is in violation of the criminal law outside the other illegal acts, such as violates the public security administration punishment law, customs law, financial laws and regulations behavior. The fourth is < cases > Article 32 stipulates, minor party members and the circumstances of the crime, the people's Procuratorate shall make a decision not to initiate a prosecution, or the people's court shall make a conviction and exempted from criminal punishment shall be given within the party is removed from his post, probation or expelled from the party. Party members and crime, sheets were fined in accordance with For acts; the principal Ordinance amended the provisions of the preceding paragraph. This is the new content, in order to achieve Ji method effectiveconvergence. Five is < > the thirty third article 10 of the provisions, the Party member due to an intentional crime is sentenced to criminal law (including probation) sheets or additional deprivation of political rights; due to negligence crime and was sentenced to three years or more (excluding three years) a penalty, shall give expelled punishment. Due to negligence crime is convicted and sentenced to three years (including three years) in prison or be sentenced to public surveillance, detention, shall in general be expelled from the party. For the individual may not be expelled from the party, should control Approval. This is followed and retained the original > < Regulations the provisions of punishment party authorization rules and report to a level party organizations. For is "party members with criminal acts, and by the criminal punishment, generally should be expelled from the party". The fifth chapter of probationary Party member of the discipline and discipline after missing members of the treatment and punishment decisions, such as the implementation of the provisions, clear the related party discipline and punishment decision made after, for duties, wages and other relevant alteration formalities for the longest time. 2, sub sub section will the original regulations of10 categories of acts of violation of discipline integration revised into 6 categories, respectively, in violation of the punishments for acts of political discipline "in violation of discipline behavior of punishment" in violation of integrity of disciplinary action points "of violation punishments for actsof mass discipline" "the violation of work discipline, punishment" in violation of discipline of life behavior punishment "6 chapters. 3, annex" Supplementary Provisions "clear authority making supplementary provisions of, cases of interpretative organ, as well as regulations implementation time and retroactivity etc.. 11 (3) learning understanding > < regulations needs to grasp several key problems The first problem -- about the violation of political discipline behavior > < new ordinance chapter 6 the political discipline column for the six disciplines, that is the main opposition to Party leadership and the opposition of the basic theory, basic line, basic program and basic experience, basic requirements of misconduct made provisions of the disposition, especially the eighteen since the CPC Central Committee put forward the Yan Mingzheng treatment of discipline and political rules requirements and practical achievements transformation for Discipline article, increase the false debate central policies, cliques, against the organization review, make no discipline of the principle of harmony terms. These are the party's eighteen years in comprehensive strictly Process combined with the practice of rich content. (1) false debate the central policies and undermine the Party of centralized and unified the problem is made in accordance with the provisions of the party constitution. Constitution in general programme requirements adhere to democratic centralism is one of the requirements of the construction of the party must adhere to the four cardinal. Applicationof this principle is not only the party the basic organization principle and is also the mass line in party life, it requires that we must fully develop inner-party democracy, respect for the dominant position of Party members, safeguarding the Party member democratic rights, give full play to the enthusiasm and creativity of the party organizations at all levels and Party members, at the same time, also must implement the right concentration, ensure the party's mission < the chaos in unity and concerted action to ensure that the party's decision to get quickly and effectively implementing. The Party Central Committee formulated the major principles and policies, through different channels and ways, fully listen to the party organizations and Party members of the opinions and suggestions, but 12 is some people face to face not to say back blather "" will not say, after the meeting said, "" Taiwan does not say, and nonsense ", in fact, not only disrupt the people thought, some causing serious consequences, the damage to the Party of the centralized and unified, hinder the central policy implementation, but also a serious violation of the democratic system of principles. There is no doubt that shall, in accordance with the Regulations > 4 Specified in Article 6 to give the appropriate punishment. For did not cause serious consequences, to give criticism and education or the corresponding tissue processing. (2) about the destruction of the party's unity < New Regulations > the forty eighth to fifty second article, to damage Party's unity unified and violation of political discipline, punishment situationmade explicit provisions. Article 52 of the new "in the party get round group, gangs seek private gain, cliques, cultivate private forces or through the exchange of interests, for their own to create momentum and other activities to gain political capital, given a serious warning or withdraw from their party posts disposition; if the circumstances are serious, to give Leave a party to observation or expelled from the party. (3) on against the organization review of the provisions of the constitution, party loyalty honesty is party members must comply with the obligations. Members must obey the organization decision, shall not violate the organization decided encounters by asking questions to find organization, rely on the organization, shall not deceive the organization, against the organization. For example, after the investigation does not take the initiative to explain the situation, but to engage in offensive and defensive alliance, hiding the stolen money is against survey organization, is a violation of the behavior of political discipline. Article 24 of the original > < Regulations, although the provisions of the interference, hinder group review the behavior of the fabric can be severely or 13 Aggravated punishment, but did not put this kind of behavior alone as a discipline for qualitative amount of discipline. > < new regulations increase the Article 57, "anti organization review, one of the following acts, given a warning or serious warning; if the circumstances are relatively serious, giving removed from or placed on probation within the party post; if the circumstances are serious, give。
设备清单及技术参数
序号
设备名称
参考规格
技术参数
单位
数量
1
负压井
尺寸Φ750*1300mm;
进水De160∕110,出水
De63
机械负压阀材质ABS,启闭无需任何形式电源和气源动力；壳体材质PEo
座
645
智慧负压站
流量Q=30m3∕d;;直径2400mm,装机功率8.8KW
一体化设备，全地埋结构，壳体材质为碳钢防腐;P1C+HMI控制;
（4）本项目不含土建工程内容：
（5）设备数量为暂定数量，具体根据项目现场需求量采购。
搭配智慧物联网平台；服务范围500m-700mo
座
19
说明：
（1）一体化设备须包括远程控制及数据传输系统、本体、水泵、负压设备及附属、智能控制柜、摄像头及立杆；
（2）一体化设备外形采用厢式构造，符合结构力学需求和结构负载要求，内外沥育防腐处理，在厢体外ห้องสมุดไป่ตู้有明确的标注处理量、生产厂家等的标识标牌；
（3）设备供电可采用220V或380V市电；
设备技术性能和规格参数表
accessories
参数
parameter
电机
motor
型号：YBVP4-4P，输出转速1440r/min
Model: YBVP4-4P, output speed 1440r/min
减速机
reducer
型号：RF77EDRN112M4/2G-b/KCC/TF/C（480V/60HZ），输出转速：212r/min
32
1260*6500*1580mm
5
1-T-12083
Calcium and Zinc Removal Extractio
6
1-T-12026
Manganese Sulfate Extraction Tank硫酸锰萃取槽
30
1260*6500*1580mm
The 150×150×7×10mmH steel is used as the column, the beam is 180×94×6.5mm I-beam, the diagonal brace is made of 70×6 Angle iron, and the thickness of the installation iron plate is 20mm
Model: RF77EDRN112M4/2G-b/KCC/TF/C (480V/60HZ), output speed: 212r/min
机架
rack
型号：JXD55，品牌蓝马
Model: JXD55, brand Blue Horse
搅拌桨
Stirring paddle
叶轮Φ500，PVC材质，搅拌轴Φ50*8无缝管，外套PVC保护管，Φ160上下铸铁联轴器
2
1-T-12009A
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
生效日期 : 2013 -11 -20 設備 名稱 設備 編號 機種 型號 最大紙 張尺寸 正常最 小紙張 尺寸 異常最 小紙張 尺寸 自 動 摺 書 機 WN-BDPM-1001 T52.3/4 52× 84cm 20.47× 33.07" 12× 18cm 4.72× 7.08" 10× 18cm 3.94× 7.08" WN-BD-PM1002#1006 KD78.1/4 KLL - FD 78× 116cm 30.7× 45.66" 15× 20cm 5.91× 7.87" 12× 18cm 4.72× 7.08" 半自動折書機 WN-BDPM-1003 MULTIPLI 354 32× 45cm 12.59× 17.72" 7× 12cm 2.75× 4.72" 5× 12cm 1.97× 4.72" WN-BDPM-1025 HB382 38× 45cm 14.96× 17.72" 9× 9cm 3.54× 3.54" 5× 7cm 1.97× 2.76" 書釘最 大距離 10.63" 6cm(小釘頭) 120g(橫紋) 4梳+4梳 摺頁 功能 最高 速度 正常生 常速度 7000pcs/H 可折對折 或風琴折 四梳三刀 四梳 刀需折十字型 200m / min 6000pcs/H 2梳+2梳 折風琴/順對折﹐不 可折+字/荷包折 130m / min 8000pcs/H 釘書最 大厚度 最高 速度 正常生 常速度 書釘最 小距離 2.4" 8cm(大釘頭） 3.2" 0.5cm 8000pcs/H 4500本/H 書脊尺寸小于18cm 或所有風琴折的書 貼都需留飄口（飄 口正常尺寸 8mm, 最小5mm);做拉頁 的說明書,一般情 況下封面最少需比 內頁少1mm(特殊 情況按客戶要求). 0.3cm 380次/min 1100本/H 最大台 面深度 最高裁 切速度 正常生 常速度 0.6" 9.4" 設備名稱 自動騎釘龍 WN-BDPM-1005 1509 36× 30cm 14.17× 11.81" 14× 9cm 5.51× 3.54" 27cm 半自動 釘書機 WN-BD-PM1004#1007 SC101 30× 25cm 11.81× 9.84" 8× 6cm 3.14× 2.36" 2.4cm 設備名稱 切紙機 WS-BDPM-1001 TIGER1160D 116cm 45.66" 116cm 45.66" 10.2cm 4.0" 2.6cm 1.0" 16cm 6.3" 186cm 73.22" 26次/分鐘 120刀 / H 最高速度 正常生 常速度 最小包 本厚度 0.12" 1800本/H 900本/H 設備名稱 圓盤包 本機 設備名稱 電動線圈 收口機 WN-BDPM-1030 SKJ-600/24mm 58X22cm 22.8X8.6" 60X24cm 23.6X9.4" 30個 紙制品 沖孔機 WN-BDPM-1029 CK600A 25.4X50.8cm 10X20" 33X61cm 13X24" 30個
設備編號 機種型號 最大尺寸 (本) 淨寬
設備編號 機種型號 最大裁 切寬度
設備編號 WN-BD-PM-1035 機種型號 最大包 本尺寸 最小包 本尺寸 最大封 面尺寸 最小封 面尺寸 BBY40/5B
設備編號 機種型號 正常最大工 作台面尺寸
45x27cm
最小尺寸 (本) 淨寬
最大裁 切深度 正常最小 裁切深度 異常最小 裁切深度 (需拆壓 板） 裁切厚 度上限
0.1 - 8 mm 1000本/H 800本/H
0.1 - 8 mm 1000本/H 800本/H
特別 功能
1.雙聯分紙; 2.針孔線; 3.可壓折痕線;
1.雙聯分紙; 2. 針孔線
分紙 針孔線
備注
特別功能
備注
正常情況下﹐封 面的天頭尺寸要 比內文的天頭尺 寸大2mm,以防膠 水溢出等不良。
特別功能
12× 10cm
異常最大工 作台面尺寸
45× 58cm 最多孔位 12.5× 20.3cm 孔位尺寸
150g(同紋),大于150g需啤線. 紙張厚 度上限 1.5cm
最大包 本厚度
4cm 1.57" 0.3cm
4X4 mm
4X4 mm
孔位距 離尺寸
4 mm
4 mm
正常紙張 厚度范圍 最高速度 正常生 產速度