英文销售合同_中英文对照销售合同范本

合集下载

国际贸易合同外贸销售中英文合同7篇

国际贸易合同外贸销售中英文合同7篇篇1国际贸易合同（International Trade Contract）甲方（买方）：____________（以下简称甲方）乙方（卖方）：____________（以下简称乙方）鉴于甲、乙双方本着互利共赢的原则，经友好协商，就甲方向乙方购买商品事宜达成如下协议：一、商品名称、规格型号、数量及价格（Product Description, Specifications, Quantity and Price）1. 商品名称（Product Name）：____________________2. 规格型号（Specification & Model）：______________3. 数量（Quantity）：______________________4. 单价（Unit Price）：______________________5. 总价（Total Price）：______________________二、付款方式及时间（Payment Term and Time）1. 甲方应在合同签订后______天内支付乙方总金额的______%作为预付款。

2. 甲方应在收到货物并验收合格后______天内支付剩余款项。

3. 付款方式为：______________________。

三、交货期限与地点（Delivery Time and Place）1. 乙方应于本合同签订后______天内交货。

2. 交货地点：______________________。

3. 运输方式：______________________。

四、质量保证与索赔（Quality Assurance and Claim）1. 乙方应保证所销售的商品符合甲方要求，且质量合格。

2. 若因商品质量问题造成甲方损失，乙方应承担相应责任并赔偿甲方损失。

3. 如发生索赔事件，双方应友好协商解决。

英文销售合同_中英文对照销售合同范本

英文销售合同_中英文对照销售合同范本英文销售合同_中英文对照销售合同范本(一) SALES CONTRACT 合同编号：Contract NO:签订地点：Signed at:签订日期：Date: 买方：The Buyers：卖方：The Sellers：双方同意按下列条款由买方售出下列商品：The Buyers agree to buy and the Sellers agree to sell the following goodson terms and conditions as set forth below：(1)商品名称、规格及包装(1)Name of Commodity ,Specifications and Packing (2)数量(2)Quantity(3)单价(3)Unit Price(4)总值(4)Total Value (装运数量允许有 %的增减)(Shipment Quantity %more or less allowed) (5)装运期限：(5)Time of Shipment：(6)装运口岸：(6)Port of loading：(7)目的口岸：(7)Port of Destination：(8)保险;由方负责，按本合同总值110%投保_____险。

(8)Insurance：To be covered by the___for 110% of the invoice valueagainst_______.(9)付款：凭保兑的、不可撤销的、可转让的、可分割的即期有电报套汇条款/见票/出票____天期付款信用证，信用证以_____为受益人并允许分批装运和转船。

该信用证必须在______前开到卖方，信用证的有效期应为上述装船期后第15天，在中国______到期，否则卖方有权取消本售货合约，不另行通知，并保留因此而发生的一切损失的索赔权。

(9)Terms of Payment：By confirmed, irrevocable, transferable and divisibleletter of credit in favour of _____payable at sight with TT reimbursementclause/___days’/sight/date allowing partial shipment and transshipment. Thecovering Letter of Credit must reach the Sellers before _____and is to remainvalid in _____.China until the 15th day after the aforesaid time of shipment,failing which the Sellers reserve the right to cancel this Sales Contractwithout further notice and to claim from the Buyers for losses resultingtherefrom.(10)商品检验：以中国________所签发的品质/数量/重量/包装/卫生检验合格证书作为卖方的交货依据。

销售合同中英文对照3篇

销售合同中英文对照3篇全文共3篇示例，供读者参考篇1Sales ContractThis Sales Contract is made and entered into on this [date], by and between the Seller, [Seller’s Name], located at [Seller’s Address], and the Buyer, [Buyer’s Name], located at [Buyer’s Address].1. Agreement to Sell. The Seller agrees to sell, transfer and deliver to the Buyer the following goods: [description of goods].2. Purchase Price. The Buyer agrees to purchase and pay the Seller the sum of [purchase price] for the goods mentioned above.3. Payment Terms. The Buyer shall make a [deposit amount] deposit upon signing this contract, with the balance due upon delivery of the goods. Payment shall be made in [currency] via [payment method].4. Delivery. The Seller agrees to deliver the goods to the Buyer at the following location: [delivery address] on or before [delivery date].5. Title and Risk of Loss. Title and risk of loss of the goods shall pass from the Seller to the Buyer upon delivery of the goods.6. Warranties. The Seller warrants that the goods are free from any defects in material and workmanship and will conform to the specifications mentioned in this contract.7. Acceptance. The Buyer shall inspect the goods upon delivery and shall notify the Seller of any defects ornon-conformance within [number] days of delivery. Failure to do so shall constitute acceptance of the goods.8. Governing Law. This contract shall be governed by the laws of [jurisdiction].9. Entire Agreement. This contract constitutes the entire agreement between the Seller and the Buyer and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this contract as of the date first above written.Seller: [S eller’s Name]Buyer: [Buyer’s Name]篇2Sales Contract销售合同This Sales Contract (hereinafter referred to as "Contract") is entered into on [date] by and between [seller name], a company organized and existing under the laws of [country], with its principal place of business located at [address], and [buyer name], a company organized and existing under the laws of [country], with its principal place of business located at [address].本销售合同（以下简称“合同”）由[卖方名称]（以下简称“卖方”），一家依据[国家]法律组织和存续的公司，主营业务地点位于[地址]，与[买方名称]（以下简称“买方”），一家依据[国家]法律组织和存续的公司，主营业务地点位于[地址]，于[date]签订。

销售合同模板中英文对照

销售合同模板（中英文对照）Contract for Sale甲方（卖方）：Party A (Seller)乙方（买方）：Party B (Buyer)鉴于甲方是具备合法资质的商品生产商和销售商，拥有良好的商业信誉；乙方愿意购买甲方的产品，经双方友好协商，特订立本合同，以便共同遵守。

In view of the fact that Party A is a manufacturer and seller of goods with legal qualifications and good business reputation; Party B is willing to purchase Party A's products; both parties have negotiated amiably and have concluded this Contract in order to abide by it together.第一条产品名称、规格、数量和质量Article 1: Name, Specification, Quantity and Quality of the Product1.1 本合同产品名称、规格、数量和质量详见附件一。

1.1 The name, specification, quantity, and quality of the product inthis Contract are detailed in Attachment 1.第二条价格和支付方式Article 2: Price and Payment Method2.1 产品单价为人民币【元】（大写：【人民币】整），详见附件一。

2.1 The unit price of the product is RMB【Yuan】(in Chinese: 【RMB】整), as detailed in Attachment 1.2.2 乙方应按照本合同约定的付款方式，向甲方支付产品价款。

销售合同英文范本6篇

销售合同英文范本6篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is the owner of a certain quantity of goods described in this Contract and desires to sell and the Buyer agrees to buy the same on the terms and conditions stipulated below:1. PRODUCTS AND QUANTITYThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Specify the product name, model number, specifications, quantity, etc.] The total quantity to be sold and purchased shall be clearly stated in the invoice.2. PRICE AND PAYMENTThe price of the goods shall be as per the list attached to this Contract. The total amount payable by the Buyer to the Seller shall be [specify the total amount]. Payment terms are as follows: [Insert terms such as deposit payment prior to delivery, full payment upon delivery, etc.] All banking fees shall be borne by the party designated for payment.3. DELIVERY AND TIME OF DELIVERYThe Seller shall deliver the goods to the Buyer at the agreed place of delivery within [specify a reasonable time frame]. Any delay in delivery must be notified to the Buyer in writing. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.4. QUALITY AND GUARANTEEThe Seller guarantees that the goods are new and of good quality, free from defects in material and workmanship, and comply with all applicable specifications and standards. The Seller shall replace any goods found defective within a reasonable period after delivery.5. PACKAGING AND MARKINGThe Seller shall pack the goods properly and ensure that they are clearly marked with necessary identification marks, labels, and other necessary information. The cost of packaging shall be borne by the Seller unless otherwise agreed by the Buyer.6. INSPECTION AND ACCEPTANCEThe Buyer has the right to inspect the goods during production and prior to delivery. Upon receipt of the goods, the Buyer shall have a reasonable period to inspect and accept or reject the goods in accordance with this Contract. Any rejected goods must be returned to the Seller at the Seller's cost and risk.7. FORCE MAJEURENeither party shall be liable for failure to perform any obligation under this Contract due to causes beyond their reasonable control, such as acts of war, riots, strikes, floods, fire, etc. However, the affected party shall notify the other party promptly in writing and provide evidence of such occurrence.8. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure and shallnot disclose it to any third party without the prior written consent of the other party.9. TERMINATIONThis Contract may be terminated by either party in writing if there is a breach of any term or condition by the other party that cannot be rectified within a reasonable period of time. Termination shall not affect any obligation that has already been incurred by either party prior to termination.10. MISCELLANEOUSThe Buyer The Seller(Authorized Representative) (Authorized Representative)Date: Date:Signature: Signature:Company Name: Company Name:Address: Address:Telephone No.: Telephone No.:Email Address: Email Address: 邮件地址篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the specifications listed in Annex A attached to this Contract.2. Quantity and Price:The Seller agrees to sell the products in the quantity specified in Annex A at the prices specified therein. The prices are fixed and firm for the duration of this Contract.3. Terms of Payment:Payment shall be made by the Buyer to the Seller as follows: __% (percentage) of the total contract value upon signing of this Contract; __% (percentage) upon delivery of the goods; and the balance upon receipt of the Seller's performance bond or other guarantee documents. All payments shall be made in the currency specified in Annex B.4. Delivery:The Seller shall deliver the products to the port specified in Annex C within the time agreed upon in this Contract. The Seller shall be responsible for arranging transportation of the goods and shall bear all expenses related to delivery.5. Quality Inspection and Warranty:The Seller guarantees that all products are new and of good quality, free from any defects, and comply with all applicable specifications and standards. The Seller shall provide necessary quality inspection certificates and other documents. The Buyer shall have the right to conduct its own quality inspections at the loading port.6. Packing and Marking:The Seller shall pack the products in a proper manner to ensure safe transportation to the port specified in Annex C. The packages shall be properly marked with contract number, product name, quantity, weight, and other necessary information.7. Risk and Insurance:Risk of loss or damage to the products shall pass to the Buyer upon delivery at the port specified in Annex C. The Seller shall arrange for insurance of the goods during transportation at its own cost. The insurance shall cover at least 110% of the total contract value against all risks commonly covered for such goods. The insurance certificate shall be handed over to the Buyer on delivery of the goods.8. Terms of Settlement for Disputes:篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller,NOW THEREFORE, the parties hereby agree as follows:Article 1: Contract ProductThe product to be sold under this Contract is [describe the product in detail]. The specifications and quantity of the product are listed in the attached schedule.Article 2: Price and PaymentThe price of the product shall be as stated in the attached schedule. The payment shall be made through [specify payment method] within [specify time frame] after the date of delivery.Article 3: Delivery and ShippingThe Seller shall deliver the product to the Buyer at the shipping address specified by the Buyer. The delivery date shall be as stated in the attached schedule. Shipping and transportation risks shall be borne by [specify which party bears these risks].Article 4: Quality and InspectionThe Seller shall ensure that the product meets the quality standards specified in this Contract. The Buyer shall have the right to inspect the product during production and upon delivery. If any defects are found, the Seller shall promptly replace or repair the product.Article 5: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior written consent of the other party.Article 6: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, wars, riots, or government policies, provided that the affected party promptly notifies the other party of such events and takes reasonable measures to mitigate their effects.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [specify duration] for the product. During this period, any defects in material or workmanship shall be repaired or replaced free ofcharge. The Seller shall also provide after-sales service as specified in the attached schedule.Article 8: TerminationThis Contract may be terminated by either party giving written notice to the other party in case of fundamental breach by either party. The party seeking termination shall give reasonable notice and provide evidence of such breach. The provisions of this Contract concerning confidentiality, warranty, and any obligations arising prior to termination shall survive termination.Article 9: Jurisdiction and LawThis Contract shall be governed by the laws of [specify country/jurisdiction]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/arbitration institution] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the parties for the sale of the product. No modification or amendment shall be binding unless made in writing and signedby both parties. This Contract is made in [specify language] only, and any translation provided for reference only.IN WITNESS WHEREOF, the parties have executed this Contract by their authorized representatives on the dates specified below.Buyer:(Authorized Representative)Date:Seller:(Authorized Representative)Date:[Note: This is a general sales contract template and may need to be modified to fit specific circumstances.]篇4SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller on the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: [specific details of the products to be sold, including name, model, quantity, quality, specifications, etc.].2. Price and Payment:The total contract price is [specify the total contract price]. The payment terms are as follows: [describe the payment terms, e.g., 30% advance payment, balance upon delivery, payment through bank transfer or other methods].3. Delivery:The Seller shall deliver the products to the Buyer at the following address: [delivery address]. The delivery date shall be [specify the delivery date]. Any delay in delivery shall be notified to the Buyer in advance.4. Quality Assurance:The Seller guarantees that the products are of good quality and comply with all applicable standards. The Seller shall be responsible for any defects in material or workmanship.5. Warranty:The Seller warrants that the products are new and not previously used. The Seller shall replace any defective products or make necessary repairs during the warranty period.6. Force Majeure:In case of force majeure events, such as natural disasters, war, political unrest, etc., which prevent or hinder the performance of this Contract, the Seller shall notify the Buyer immediately and seek to resolve the issue as soon as possible.7. Confidentiality:Both parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business strategies.8. Termination:This Contract may be terminated by either party in case of breach of any term or condition by the other party. The partyseeking termination shall provide a written notice to the other party specifying the reasons for termination.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [specify court/tribunal] for resolution.10. Miscellaneous:This Contract is made in duplicate originals, each party holding one original. This Contract shall be governed by and construed in accordance with the laws of [specifycountry/jurisdiction]. Any amendment or modification to this Contract shall be made in writing and signed by both parties. This Contract is effective from the date of signing by both parties.Buyer: _____________________Seller: _____________________Date: _____________________篇5SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller", whereby both parties agree as follows:一、商品条款Article 1: Commodity1. 商品名称：____________________（请填写商品名称）2. 商品规格：____________________（请填写商品规格）3. 单位价格：____________________（请填写单价）4. 总金额：（小写）____________________ （大写）____________________（人民币）二、价格与货币条款Article 2: Price and Terms of Payment1. 除非另有规定，“CIP价格”应包括卖方将货物交运至指定的目的地的所有成本与费用，包括运输成本及保险费。

外贸销售合同样本中英文5篇

外贸销售合同样本中英文5篇篇1合同编号：XXXXXXXXXX甲方（买方）：____________________乙方（卖方）：____________________鉴于甲、乙双方本着平等互利、合作共赢的原则，经友好协商，就甲方向乙方购买商品事宜，达成如下协议：一、商品名称、规格型号、数量及价格（中英文对照）商品名称：____________________规格型号：____________________数量：____________________单价：____________________总价：____________________二、付款方式及期限（Payment Term）1. 付款方式和比例：双方约定采用电汇（T/T）方式支付货款，付款比例为_____%。

2. 付款期限：甲方在收到货物并确认质量合格后_____天内完成付款。

三、交货时间与方式（Time and Mode of Delivery）1. 交货时间：乙方需在合同签署后_____天内完成交货。

2. 交货方式：采用国际空运方式，乙方负责安排运输并确保货物按时到达甲方指定地点。

四、质量保证与售后（Quality Assurance and After-sales Service）1. 乙方应保证所销售的商品质量符合相关标准和甲方的要求。

2. 若甲方发现商品存在质量问题，应及时通知乙方，乙方应负责退换货或提供维修服务。

3. 乙方需提供必要的售后支持和技术指导。

五、知识产权与保密条款（Intellectual Property and Confidentiality）1. 双方应尊重彼此的知识产权，未经对方许可，不得擅自使用对方的商标、专利等知识产权。

2. 双方在合作过程中所知悉的商业秘密和技术秘密，应予以保密，未经对方同意，不得泄露给第三方。

六、违约责任（Liability for Breach of Contract）1. 若一方未按照合同约定履行义务，应承担违约责任，并赔偿因此给对方造成的损失。

中英文销售合同5篇

中英文销售合同5篇篇1Sales ContractThis Sales Contract ("Contract") is made on [Insert Date], between [Seller’s Name], with its principal place of business located at [Seller’s Address], and [Buyer’s Name], with its principal place of business located at [Buyer’s Address]. Seller and Bu yer are collectively referred to as the “Parties”.1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products:- [Product 1], quantity: [Quantity], unit price: [Price]- [Product 2], quantity: [Quantity], unit price: [Price]- [Product 3], quantity: [Quantity], unit price: [Price]2. Delivery: The Seller agrees to deliver the products as follows:- Delivery Location: [Delivery Address]- Delivery Date: [Date]- Delivery method: [Method]3. Payment: The Buyer agrees to pay the Seller for the products in the following manner:- Total Price: [Total Amount]- Payment Method: [Method]- Payment Terms: [Terms]4. Inspection and Acceptance: The Buyer shall inspect the products upon delivery and shall have [Number] days to notify the Seller of any defects. Failure to notify the Seller within the specified period shall constitute acceptance of the products.5. Warranty: The Seller warrants that the products will be free from defects in materials and workmanship for a period of [Warranty Period]. If any defects are discovered within the warranty period, the Seller shall repair or replace the products at no additional cost to the Buyer.6. Liability: The Seller shall not be liable for any damages resulting from the use or misuse of the products by the Buyer or any third party.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].8. Entire Agreement: This Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________Date: ________________________[Attach signatures of both parties]This Sales Contract is hereby agreed to by the Parties as of the date first written above.[Seller’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________[Buyer’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________篇2Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], with its principal place of business located at [address], and [Buyer], with its principal place of business located at [address].1. Goods SoldSeller agrees to sell and Buyer agrees to purchase the following goods:- Description of goods- Quantity- Price2. DeliverySeller shall deliver the goods to Buyer at the following address: [delivery address]. Delivery shall be made on or before [delivery date]. Buyer shall be responsible for any shipping costs associated with the delivery of the goods.3. PaymentBuyer agrees to pay Seller the total purchase price of the goods, which shall be [total amount]. Payment shall be made in the following manner:- [Payment method]- [Payment schedule]4. WarrantiesSeller warrants that the goods sold under this contract are free from defects in materials and workmanship and conform to the specifications provided by the Seller. Seller further warrants that it has good and marketable title to the goods. Any claims for breach of warranty must be made within [timeframe] after delivery of the goods.5. Inspection and AcceptanceBuyer shall have [number] days after delivery of the goods to inspect them. If Buyer finds any defects or nonconformities, Buyer must notify Seller in writing within [timeframe]. Seller shall have the opportunity to inspect the goods and make any necessary repairs or replacements.6. Limitation of LiabilitySeller's liability for any breach of this contract or for any claims arising out of the sale of the goods is limited to the purchase price of the goods. Seller shall not be liable for any consequential, incidental, or punitive damages.7. Governing LawThis contract shall be governed by the laws of[state/country]. Any disputes arising out of this contract shall be resolved through arbitration in [location].8. Entire AgreementThis Sales Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the parties have executed this Sales Contract as of the date first written above.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇3Sales ContractThis Sales Contract (hereinafter referred to as "Contract") is entered into by and between Party A [Seller], located at [Address], and Party B [Buyer], located at [Address], on [Date].Article 1. Subject of the Contract1.1 Party A agrees to sell and Party B agrees to purchase the following goods:- Quantity: [Number]- Description: [Product Description]- Unit Price: [Price]- Total Price: [Price x Quantity]- Delivery Date: [Date]Article 2. Payment Terms2.1 The total price of the goods shall be paid by Party B to Party A in the following manner:- [Payment Method]- [Payment Schedule]- [Bank Details]Article 3. Delivery Terms3.1 Party A shall deliver the goods to the address specified by Party B on the agreed delivery date.3.2 Party A shall be responsible for the packaging and transportation of the goods to ensure they arrive in good condition.3.3 Party B shall inspect the goods upon delivery and notify Party A of any defects or discrepancies within [Number] days.Article 4. Title and Risk4.1 Title to the goods shall pass to Party B upon full payment of the total price.4.2 The risk of loss or damage to the goods shall pass to Party B upon delivery.Article 5. Warranties5.1 Party A warrants that the goods are free from defects in material and workmanship and conform to the description provided.5.2 Party A shall be responsible for repairing or replacing any defective goods at no additional cost to Party B.Article 6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].Article 7. Dispute Resolution7.1 Any disputes arising from this Contract shall be resolved through negotiation in good faith.7.2 If a resolution cannot be reached, the dispute shall be resolved through arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Party A: ________________________[Signature][Name][Title]Date:Party B: ________________________[Signature][Name][Title]Date:This Sales Contract is hereby accepted and agreed to by both Parties.以上是一份典型的中英文销售合同，包括订购商品、付款条款、交货条件、担保、适用法律等内容。

外贸销售中英文合同8篇

外贸销售中英文合同8篇篇1合同编号：XXX/XXXX/XXXX/XX甲方：（出口商全称）地址：（出口商地址）电话：（出口商联系电话）传真：（出口商传真号码）邮编：（出口商邮政编码）法定代表人：（出口商法人姓名）公司名称：（出口商公司名称）注册国家或地区：（注册国家或地区）营业注册证号码：（营业执照注册号）业务类型：对外贸易货物销售等进出口相关业务（以下简为甲方）以下简称买方篇2合同编号：【编号】甲方（卖方）：【公司名称】地址：【公司地址】电话：【公司电话】传真：【公司传真】电子邮箱：【公司邮箱】乙方（买方）：【客户名称】地址：【客户地址】电话：【客户电话】传真：【客户传真】电子邮箱：【客户邮箱】鉴于甲方同意向乙方销售以下商品：【商品名称和数量】现甲、乙双方根据《中华人民共和国合同法》等相关法律法规，就有关事宜达成如下协议：一、商品描述1. 商品名称：【商品名称】2. 商品规格：【商品规格】3. 商品数量：【商品数量】4. 商品质量：按照附件中的质量标准和规格要求进行生产和检验，符合国际标准。

5. 商品包装：按照甲方的标准包装，确保商品在运输过程中完好无损。

二、价格条款1. 商品价格：【商品价格】2. 货币种类：本合同所涉及的金额均以【货币种类】计价。

3. 运输费用：运输费用由乙方承担，甲方负责安排运输。

如因运输导致商品损失，由承运方负责赔偿。

4. 支付方式：【支付方式】，支付时间为【支付时间】。

乙方需在支付期限内完成付款，否则视为违约。

5. 退换货条款：如因甲方原因导致商品质量问题，乙方有权要求退换货。

退换货产生的费用由甲方承担。

如因乙方原因导致退换货，退换货产生的费用由乙方承担。

退换货的具体流程和条件详见附件。

三、交货期限和地点1. 交货期限：【交货时间】。

甲方需在约定时间内完成交货。

如因特殊情况无法按时交货，甲方需及时通知乙方并协商解决方案。

2. 交货地点：【交货地点】。

货物到达指定地点后，由乙方自行安排验收。

2024年中英文销售合同范本简短6篇

2024年中英文销售合同范本简短6篇篇1合同编号：XXXX-XXXX-XXXX甲方（买方）：____________________地址：____________________________联系方式：________________________乙方（卖方）：____________________地址：____________________________联系方式：________________________鉴于甲、乙双方本着互惠互利、共同发展的原则，经友好协商，就甲方向乙方购买商品事宜达成如下协议：一、商品条款1. 商品名称及规格：______________________ （中文）/______________ （英文）。

2. 商品数量：____________件。

买方如需要变更购买数量，需提前一周通知卖方进行相应调整。

3. 商品单价：人民币______元/件（或美元______元/件）。

价格包含包装费、运输费等所有附加费用。

除非另有约定，否则商品不得拒收。

价格根据市场行情波动时，双方另行协商调整。

4. 总金额：人民币______元整（或美元______元整）。

最终交易金额根据本合同约定的商品数量与单价计算。

二、交易条款1. 交易方式：双方约定以电汇方式支付货款，具体支付信息如下：卖方账户名、账户号、开户行等支付信息由卖方提供并在合同签署后提供给买方确认无误后操作汇款。

买方在付款后应及时通知卖方确认收款情况。

2. 付款方式：买方应在合同签署后______天内支付全额货款至卖方指定账户。

卖方在收到全额货款后按照双方约定的交货期发货。

3. 交货期限：卖方应在收到全额货款后的______天内完成发货。

如遇特殊情况需延迟发货，卖方应及时通知买方并征得买方同意。

4. 交货方式及地点：采用陆运方式（或海运、空运）将商品运至买方指定地点。

运费由卖方承担。

买方在收到货物后______天内对商品进行验收，如有数量短缺或质量问题应及时通知卖方协商解决。

销售合同中英文对照7篇

销售合同中英文对照7篇篇1本合同（以下简称“合同”）由以下双方签订：买方：（以下简称“甲方”）卖方：（以下简称“乙方”）鉴于甲、乙双方同意进行商品交易，为明确双方的权利和义务，达成如下协议：一、商品描述商品名称：____________规格型号：____________数量：____________质量：符合国家标准及双方约定标准。

二、价格条款1. 商品价格：甲方同意购买，乙方同意出售上述商品，价格为________元人民币。

2. 货币单位：本合同中的货币单位均为人民币。

3. 支付方式：甲方应通过银行转账或其他双方同意的方式支付货款。

4. 付款期限：甲方应在收到货物后的____天内完成付款。

三、交货条款1. 交货期限：乙方应在合同签署后的____天内完成交货。

2. 交货地点：双方约定的地点。

3. 运输方式：由乙方选择最经济、安全的运输方式。

4. 风险提示：乙方应确保所交付的商品符合质量标准，否则应承担相应的违约责任。

四、保证与承诺1. 乙方应保证所销售的商品为全新的、未使用过的，并符合质量标准。

2. 乙方承诺在售后服务方面履行应尽的义务，包括但不限于维修、退换货等。

3. 甲方承诺按照约定支付货款，并遵守合同条款。

五、违约责任1. 若甲方未按照约定支付货款，乙方有权要求甲方支付违约金。

2. 若乙方交付的商品存在质量问题，乙方应承担违约责任，并赔偿甲方的损失。

3. 若因不可抗力因素导致合同无法履行，双方均不承担违约责任。

六、法律适用与争议解决1. 本合同的签订、履行、解释及争议解决均适用中华人民共和国法律。

2. 若双方在合同履行过程中发生争议，应首先通过友好协商解决；协商不成的，任何一方均有权向合同签订地的人民法院提起诉讼。

七、其他条款1. 本合同为甲、乙双方的完整协议，对双方具有法律约束力。

2. 本合同一式两份，甲、乙双方各执一份。

本合同自双方签字盖章之日起生效。

3. 未尽事宜，由双方另行协商并签订补充协议，补充协议与本合同具有同等法律效力。

销售合同中英文对照6篇

销售合同中英文对照6篇篇1本合同（以下简称“合同”）由以下双方签订：买方：（以下简称“甲方”）卖方：（以下简称“乙方”）鉴于甲、乙双方同意进行商品交易，为明确双方的权利和义务，达成如下协议：一、商品描述商品名称：____________规格型号：____________数量：____________质量：符合国家标准及双方约定标准。

二、价格及支付方式1. 商品价格：商品总价为______元人民币（或美元_____元）。

如因市场行情变化导致价格波动，双方可另行协商调整价格。

2. 支付方式：甲方应按照以下方式支付货款：（1）预付款：合同签订后，甲方应支付乙方总金额的____%作为预付款。

（2）发货款：乙方发货前，甲方应支付剩余款项。

（3）其他支付方式：双方可另行协商确定其他支付方式。

三、交货与验收1. 交货期限：乙方应在合同签署后的____天内交货。

2. 交货地点：____________________。

3. 验收标准：按照甲、乙双方约定的质量标准进行验收。

4. 验收方式：甲方应在收到货物后____天内进行验收，并书面通知乙方验收结果。

如甲方未在规定时间内验收，则视为验收合格。

四、违约责任1. 若甲方未按照约定时间支付货款，乙方有权解除本合同，并要求甲方支付逾期付款违约金。

2. 若乙方未按照约定时间交货，应按照未交付货物总价值的一定比例向甲方支付违约金。

3. 若因乙方原因导致交付的货物质量不符合约定标准，乙方应承担全部责任，并按照甲方的要求重新交付货物或进行赔偿。

4. 其他违约责任按照《中华人民共和国合同法》的相关规定处理。

五、保密条款甲、乙双方应对在本合同项下获知的对方商业秘密、技术秘密等信息予以保密，未经对方许可，不得向第三方泄露。

六、不可抗力因不可抗力导致甲、乙双方无法履行本合同义务的，双方均不承担违约责任。

不可抗力事件包括自然灾害、战争、政府行为等无法预见、无法避免和无法克服的客观情况。

七、争议解决因本合同引起的任何争议，双方应首先友好协商解决；协商不成的，任何一方均有权向有管辖权的人民法院提起诉讼。

中英文销售合同7篇

中英文销售合同7篇篇1甲方（卖方）：_____________联系方式：_____________地址：_____________公司名称及法律形式：_____________公司营业范围及经营资质：营业执照所载范围的经营资格。

合法授权签署本协议资格及开展协议规定相关活动的权利能力。

若因甲方不具备前述资格和能力而导致本协议无法履行或履行不当所产生的所有责任均由甲方承担。

乙方（买方）：_____________联系方式：_____________地址：_____________一、CONTRACTING PARTIES （合同双方）二、Terms and Clauses （合同条款）篇2销售合同（Sales Contract）甲方（卖方）：___________ （以下简称“卖方”）乙方（买方）：___________ （以下简称“买方”）鉴于买方愿意购买卖方所提供的商品，双方本着平等、自愿、互利的原则，经友好协商，达成如下协议：一、商品描述及规格（一）商品描述商品名称：___________型号/规格：___________品牌：___________质量及标准：按照双方约定标准及国家相关标准执行。

（二）数量及单价商品数量：___________单价（含包装费用）：___________ （货币单位）总价：根据商品数量与单价计算得出。

二、交货条款（一）交货期限卖方应在合同签署后的___天内完成交货。

（二）交货地点双方约定的交货地点为___________。

（三）运输方式及费用承担运输方式：___________；费用承担：___________。

三、付款条款（一）付款方式付款方式为___________（如：电汇、信用证等）。

（二）付款时间买方在收到货物并确认质量无误后___天内完成付款。

四、质量保证及售后条款卖方应保证所售商品的质量符合约定，并承担售后服务责任。

详细内容见附加协议。

五、违约责任如双方中的任何一方违反本合同的任何条款，违约方需承担相应的法律责任。

中英文销售合同样本5篇

中英文销售合同样本5篇全文共5篇示例，供读者参考篇1Sales ContractThis Sales Contract is entered into by and between [Seller], a company registered in [Country], with its principal place of business at [Address], and [Buyer], a company registered in [Country], with its principal place of business at [Address].1. Sale of Goods1.1 The Seller agrees to sell and deliver to the Buyer, and the Buyer agrees to purchase and accept from the Seller, the goods described as [Product], in the quantity of [Quantity], at the price of [Price] per unit.1.2 The Seller shall deliver the goods to the Buyer at [Delivery Address] on or before the agreed delivery date of [Date]. The risk of loss shall pass to the Buyer upon delivery of the goods to the Buyer.2. Payment Terms2.1 The Buyer shall pay the Seller the total amount of [Total Amount] within [Payment Term] days from the date of delivery of the goods. Payment shall be made in [Currency] by [Payment Method].2.2 If the Buyer fails to make payment on time, the Seller reserves the right to charge interest on the overdue amount at a rate of [Interest Rate] per annum.3. Title3.1 Title to the goods shall pass to the Buyer upon full payment of the total amount specified in this Sales Contract.4. Warranties4.1 The Seller warrants that the goods delivered under this Sales Contract are of merchantable quality and free from defects in material and workmanship.5. Governing Law5.1 This Sales Contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising out of or in connection with this Sales Contract shall be resolved through amicable negotiations. If no resolution can be reached, the parties agree to submit to the jurisdiction of the courts of [Country].IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract on the date first above written.[Seller]By: ________________________[Buyer]By: ________________________这是一个简单的中英文销售合同样本，供参考使用。

中英文对照销售代理合同3篇

中英文对照销售代理合同3篇篇1销售代理合同Sales Agency Contract甲方（委托方）: ________________________Party A (Principal): ________________________乙方（代理方）: ________________________Party B (Agent): ________________________鉴于甲方希望扩大产品市场占有率，提升品牌影响力，特此委托乙方作为其产品在指定区域内的独家销售代理商；乙方愿意接受甲方的委托，依据本合同约定的内容开展代理活动。

双方经友好协商，达成如下协议：PreambleGiven that Party A wishes to expand the market share and enhance the brand influence of its products, Party A hereby appoints Party B as the exclusive sales agent for its products in the designated territory. Party B is willing to accept the appointment by Party A and undertake agency activitiesaccording to the terms and conditions set forth herein. Both parties have reached the following agreement through friendly consultations:第一条合同双方Article 1 The Parties to the Contract1.1 甲方（委托方）: 公司名称、注册地址、法定代表人等详细信息。

1.1 Party A (Principal): Company name, registered address, legal representative, etc., detailed information.1.2 乙方（代理方）: 公司名称、注册地址、法定代表人等详细信息。

中英文销售合同5篇

中英文销售合同5篇篇1Sales ContractThis Sales Contract is made and entered into on [date] by and between [Seller], with a business address located at [address], hereinafter referred to as the "Seller," and [Buyer], with a business address located at [address], hereinafter referred to as the "Buyer."1. Agreement to Sell:The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods:Description of Goods: [description]Quantity: [quantity]Price: [price]2. Payment Terms:The Buyer shall pay the Seller the agreed upon price for the goods in full upon delivery.3. Delivery Terms:The Seller shall deliver the goods to the Buyer on [date] at [location]. The goods shall be in good condition and conform to the specifications agreed upon by both parties.4. Inspection and Acceptance:The Buyer shall inspect the goods upon delivery. If the goods are found not to conform to the specifications agreed upon, the Buyer shall have the right to reject the goods and the Seller shall replace the goods at no additional cost to the Buyer.5. Title and Risk of Loss:Title to and risk of loss of the goods shall pass to the Buyer upon delivery of the goods to the Buyer.6. Warranties:The Seller warrants that the goods are free from defects in materials and workmanship and conform to the specifications agreed upon. The Seller shall be responsible for any defects in the goods and shall replace the goods at no additional cost to the Buyer.7. Governing Law:This Sales Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire Agreement:This Sales Contract constitutes the entire agreement between the Seller and the Buyer and supersedes all prior agreements and understandings, whether written or oral, relating to the subject matter of this Sales Contract.9. Modification:This Sales Contract may only be modified or amended in writing signed by both parties.In Witness Whereof, the parties hereto have executed this Sales Contract as of the date first above written.Seller: [Signature] Date: [date]Buyer: [Signature] Date: [date]篇2Sales ContractThis Sales Contract is entered into by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact: [Seller's Contact Information]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact: [Buyer's Contact Information]1. Subject of the ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods:- Description: [Description of the Goods]- Quantity: [Quantity of the Goods]- Unit Price: [Price per Unit]- Total Price: [Total Price]2. Delivery Terms- The Seller shall deliver the goods to the Buyer at the following address: [Delivery Address]- The delivery date shall be on or before [Delivery Date]- The Buyer shall bear all costs and risks of transportation and insurance.3. Payment Terms- The Buyer shall pay the Seller the total price as specified in section 1 above.- Payment shall be made through [Payment Method] within [Number] days of the delivery date.- Late payments shall incur a penalty of [Penalty Rate] per day.4. Quality Assurance- The goods shall conform to the specifications agreed upon by both parties.- The Buyer shall have the right to inspect the goods upon delivery and reject any non-conforming goods.5. Warranty- The Seller warrants that the goods shall be free from defects in material and workmanship for a period of [Warranty Period] from the delivery date.- The Seller agrees to repair or replace any defective goods at no additional cost to the Buyer.6. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].7. Dispute ResolutionAny disputes arising out of or in connection with this Sales Contract shall be settled through arbitration in [Arbitration Location] in accordance with the rules of [Arbitration Organization].In witness whereof, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _______________ Date: ____________Buyer: _______________ Date: ____________This Sales Contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, written or oral.篇3Sales ContractThis Sales Contract is entered into between [Seller], located at [Seller's address], and [Buyer], located at [Buyer's address], on [Date].1. The Seller agrees to sell and the Buyer agrees to purchase the following products:- Product Name 1: Quantity: Price:- Product Name 2: Quantity: Price:- Product Name 3: Quantity: Price:2. Delivery:- The Seller agrees to deliver the products to the Buyer's address within [Number] days from the date of signing this contract.- The Seller will be responsible for all shipping and handling fees.3. Payment:- The Buyer agrees to pay the total amount of [Amount] for the products.- Payment shall be made in [Currency] via [Payment method] within [Number] days from the date of signing this contract.4. Quality and Inspection:- The Seller guarantees that all products meet theagreed-upon specifications and quality standards.- The Buyer has the right to inspect the products upon delivery and report any discrepancies within [Number] days.5. Warranties:- The Seller warrants that the products are free from defects in material and workmanship.- The Buyer agrees to notify the Seller promptly of any defects and allow the Seller the opportunity to repair or replace the products.6. Governing Law:- This contract shall be governed by the laws of[State/Country].- Any disputes arising from this contract shall be subject to the jurisdiction of the courts in [State/Country].7. Termination:- Either party may terminate this contract by providing written notice to the other party.- In case of termination, the Buyer shall pay for any products already delivered and any costs incurred by the Seller.In witness thereof, the parties have executed this Sales Contract on the date first written above.Seller: [Signature] Date:Buyer: [Signature] Date:This Sales Contract sets out the terms and conditions of the sale and purchase of products between the Seller and the Buyer. Both parties should carefully review and understand the terms before signing.Signed and agreed:Seller:Buyer:Date:【中英文销售合同】这份销售合同是由位于【卖方的地址】的【卖方】与位于【买方的地址】的【买方】于【日期】签订的。