Firefly客户端设置说明

合集下载

使用adobe firefly的注意事项

使用adobe firefly的注意事项

使用adobe firefly的注意事项使用Adobe Firefly的注意事项Adobe Firefly是一款功能强大的设计软件,广泛应用于图形设计、网页设计、多媒体制作等领域。

在使用Firefly时,我们需要注意以下几点:1. 熟悉软件界面和功能:在使用Firefly之前,我们需要对软件的界面和各项功能进行熟悉。

可以通过阅读相关的使用手册、教程或参加培训课程来提高自己的操作技能。

2. 注意保存文件:在使用Firefly进行设计或编辑时,要注意定期保存文件,以防止意外情况导致数据丢失。

建议在开始设计之前就设置好保存路径和文件名,并且定期保存设计成果。

3. 注意软件版本兼容性:Firefly有不同的版本,不同版本之间可能存在兼容性问题。

在使用Firefly时,要确认所使用的软件版本与其他人的版本相同或兼容,以便顺利共享和协作。

4. 选择合适的颜色模式:Firefly支持多种颜色模式,如RGB、CMYK等。

在设计过程中,要根据实际需要选择合适的颜色模式,以确保最终输出效果符合预期。

5. 注意设计素材的版权:在使用Firefly进行设计时,要注意所使用的素材是否具有版权。

遵守版权法律和道德规范是每个设计师的责任,不得盗用他人的作品或侵犯他人的权益。

6. 保持设计整洁简约:Firefly提供了丰富的设计工具和效果,但在设计过程中要注意保持整洁简约的原则。

避免过度装饰和复杂的效果,以免影响设计的可读性和美感。

7. 导出文件时选择合适的格式:Firefly支持多种文件格式的导出,如JPEG、PNG、PDF等。

在导出文件时要根据实际需求选择合适的格式,以确保最终输出效果的质量和适用性。

8. 注意设计的可维护性:在使用Firefly进行设计时,要考虑到设计的可维护性。

尽量使用规范化的命名和组织方式,方便他人在后续的编辑和修改中进行操作。

9. 注意设计与用户体验的结合:在进行网页设计或多媒体制作时,要注意设计与用户体验的结合。

Firefly与Eclipse集成说明(632)

Firefly与Eclipse集成说明(632)

Firefly与Eclipse集成说明1.安装Eclipse插件➢选择安装Eclipse插件。

在安装Hansky Firefly Client的过程中,会有一个Choose Componets的对话框,用户需要在其中选择Firefly Eclipse plugin的组件,如图。

图表 1 Choose Componets➢选择Eclipse存储路径。

在Choose Componets界面,点击Next,在Designate Java Runtime Environment Location 中选择JRE的存储路径,然后Choose Eclipse Location对话框弹出,如图。

在对话框中点击“Browse”,选择Eclipse存储路径,该路径必须指定至eclipse.exe的路径,然后点击“Next”继续安装Firefly Client。

Note与Firefly集成的Eclipse版本为3.1或者以上版本。

图表 2 Choose Eclipse Location在正确安装完成Firefly之后,在Eclipse的Plugin目录下,将会出现com.hansky.hscc 目录,该目录下有hscc.jar、plugin.xml和icon三个子目录。

2.卸载Eclipse插件如果不需要使用Firefly与Eclipse集成,可以将位于Eclipse的Plugin目录下的com.hansky.hscc目录删除即可。

3.在Eclipse中使用Firefly进行版本控制安装过firefly4.1版本后,eclipse界面如下图所示:下面对Firefly下的菜单项的功能进行说明:1、添加工程至Firefly资源控制--Add Project to SourceControl项目管理者将Eclipse项目上传至Firefly中。

如果有项目则不需要做此步。

2、显示变更集--Show Changeset将Firefly Pending Changeset对话框显示出来,每次编辑的内容都会显示在default变更集中,类似于firefly客户端的变更集,用户通过提交变更集,把文件提交到服务器上。

Firefly安装及操作简易手册

Firefly安装及操作简易手册

Firefly安装及操作简易手册1.firefly访问方式1.1.用户名及密码总公司及黑分同事,用户名为ig_邮箱名,口令123456,例如张芳,为ig_zhangfang5。

山分同事,用户名同sdcncsi前缀名,例如裴宏祥为peihx,初始口令为123456,如在公司修改过口令,则为修改后的口令。

1.2.配置库分支结构北六BSS项目配置库共分为四个分支:1.2.1.BSS4.2源代码管理分支存放BSS4.2源代码,初始文件自亚联CVS工具中下载。

1.2.2.Firefly安装文件存放firefly安装文件及相应配置文件。

1.2.3.文档管理分支工具中下载。

SAW所有培训文档,初始文件自淮安BSS存放北六1.2.4.项目管理分支存放项目管理计划、配置管理计划、项目周报、考勤等文档。

1.3.访问方式1.3.1.Web访问适用:只需要查看配置项,或者单独下载少量文件,不进行配置项变更工作。

不需要安装客户端。

web访问地址:1.3.2.客户端访问适用:下载大量文件,或进行配置项增删改工作。

客户端访问方式,将所有文件下载到本地。

需安装firefly client,登录后选择北六BSS项目。

2.firefly安装步骤1.顺次安装.net1.1目录下dotnetfx、vjredist。

2.执行firefly4.1\win下setup文件,安装fireflyclient。

3.根据提示,默认安装即可。

(修改安装目录等不赘述)4.安装后,打开firefly client setting,进行license设置。

点击语言,可设置为中文。

.3.firefly操作基本步骤3.1.web方式3.1.1.web登录使用浏览器,输入,输入用户名及口令,登录,进入后界面如下:点击“北六BSS项目”,查看分支结构。

点击左侧,则在左侧展开分支树,点击右侧,则在右侧罗列分支。

3.1.2.目录及文件列表查看如点击左侧分支树中要访问的分支,则可以看到分支情况,点击最右侧工具栏---“目录”,可以查看分支下的文件目录。

Firefly 安装指南

Firefly 安装指南
版权所有 (c) 2001-2005 Hansky Inc,保留所有权利。 根据 《中华人民共和国著作权法》和 《国际版权公约》, Hansky 公司拥有本手册的著 作权,并保留所有权利。未得到 Hansky 公司的书面许可,任何人不得对本手册的任何 部分进行复制、挪用或传播。 本手册中的所有文档仅用于为 Hansky Firefly 的使用提供信息,其内容如有更改,恕不 另行通知。 Hansky 公司在编写该手册的时候已经尽力保证其内容准确可靠,不为其中 存在的遗漏或不当或因使用本手册中的信息造成的后果负责。 Hansky Dragonfly, Hansky Butterfly, Hansky Firefly 是 Hansky 的注册商标。
未获得 Hansky Firefly License . . . . . . . . . . . . . . . . . . . . . . . . . . .48
i
Hale Waihona Puke Firefly 安装手册目录
ii
Firefly 安装手册
图目录
图 1-1 Firefly 系统组成 ............................................................................ 8 图 2-1 安装 HPC - Welcome to Hansky Project Center Setup ......................14 图 2-2 安装 HPC - License Agreement .....................................................15 图 2-3 安装 HPC - Designate Java Runtime Environment Location ...............16 图 2-4 安装 HPC - Choose Components ...................................................17 图 2-5 安装 HPC - Choose Install Location ...............................................17 图 2-6 安装 HPC - Choose Start Menu Folder............................................18 图 2-7 安装 HPC - Installing ..................................................................18 图 2-8 安装 HPC - Completing the Hansky Project Center Setup Wizard .......19 图 2-9 安装 Firefly License .....................................................................20 图 2-10 添加 License .............................................................................20 图 2-11 HDS 界面 .................................................................................21 图 2-12 用户列表页面 .............................................................................22 图 2-13 编辑用户信息页面 .......................................................................22 图 2-14 添加用户页面 .............................................................................23 图 2-15 安装 Server - Welcome to the Hansky Firefly Server Setup .............24 图 2-16 安装 Server - License Agreement................................................24 图 2-17 安装 Server - Designate Java Runtime Environment Location..........25 图 2-18 安装 Server - Choose Install Location ..........................................26 图 2-19 安装 Server - Choose Start Menu Folder ......................................26 图 2-20 安装 Server - Installing .............................................................27 图 2-21 安装 Server - InstallShield Wizard Complete.................................27 图 2-22 安装 Client - Welcome to the the Hansky Firefly Client Setup Wizard29 图 2-23 安装 Client - License Agreement .................................................29 图 2-24 安装 Client - Choose Components ...............................................30 图 2-25 安装 Client - Choose Install Location ...........................................31 图 2-26 安装 Client - Choose Start Menu Folder........................................32 图 2-27 安装 Client - Installing ..............................................................32 图 2-28 安装 Client - Completing the Hansky Firefly Client Setup Wizard .....33 图 2-29 安装 Firefly - Welcome to the Hansky Firefly Setup Wizard .............34 图 2-30 安装 Firefly - License Agreement ................................................35 图 2-31 安装 Firefly - Choose Components ..............................................35 图 2-32 安装 Firefly - Choose Install Location...........................................36 图 2-33 安装 Firefly - Choose Start Menu Folder .......................................36 图 2-34 安装 Firefly - Inatalling..............................................................37 图 2-35 安装 Firefly - Completing the Hansky Firefly Setup Wizard..............37 图 3-1 管理服务器界面 ............................................................................42 图 3-2 服务器属性 .................................................................................43 图 3-3 编辑服务器属性 ............................................................................43

firefly安装说明

firefly安装说明

一:安装firefly客户端之前,请先确认本地是否安装了jdk,如果机器上安装了jdk,则可以忽略改步骤。

如果没有,请从网络上下载jdk并安装(建议直接安装在c:\下,并确保所有路径没有空格),安装完成后,确认是否配置设置了系统环境变量。

我的电脑—>属性—>高级—>环境变量。

例如:jdk安装目录为:C:\ jdk1.6.0_10则设置如下:JA V A_HOME=C:\ jdk1.6.0_10Path环境变量增加这个路径:%JA V A_HOME%\binCLASSPATH=\;%JA V A_HOME%\lib\tools.jar (一定要增加“\;”表示在任何目录下都可运行程序,而并非指定目录)如图:1:添加JA V A_HOME2:Path环境变量增加这个路径:%JA V A_HOME%\bin3:添加CLASSPA TH二:登陆10.72.67.218,用户名:chinaunicom,密码:chinaunicom进入\\10.72.67.218\hansky再进入\\10.72.67.218\hansky\net1.1,安装该目录下两个文件,先安装donetfx,再安装Vjredist。

再进入\\10.72.67.218\hansky\firefly4.1\win,安装setup.exe三:安装\\10.72.67.218\hansky\firefly4.1\win\setup.ext注意事项如下:1:installation option 选择firefly clint其他则使用默认项即可。

四:安装成功后,注意事项:1:安装成功后,在开始菜单找到CLIENT SETTING,在LICENSE属性中,添加LICENSE 服务器地址:10.72.67.218,端口号:4761。

在language中选择CHINESE。

2:这一步骤为管理员使用,普通用户不需要使用。

打开SERVER EXPLORE(连接服务器,弹出选择服务器的窗口),点击“项目”—>“连接服务器”,点击添加,添加服务器,主机名和显示名都为10.72.67.218,端口为默认端口,应为4759。

Firefly客户端安装图解

Firefly客户端安装图解

Firefly客户端安装图解一、安装客户端支撑软件单击“开始|设置|控制面板|添加/删除程序”,窗口显示如图(一):图(一)检查客户端是否已安装以下支撑软件①j2sdk-1.4.2_18或以上版本;②.NET Framework2.0;③VJ#2.0可再发行组件包。

如果没有安装,请分别安装工具包内如下软件:①\j2sdk-1_4_2_18-windows-i586-p;②\Net2.0\dotnetfx;③\Net2.0\vjredist二、安装Firefly Client双击Firefly安装程序,单击“Next>”,直至出现如图(二)所示,选择“Firefly Client”图(二)单击“Next>”, 直至出现如图(三)所示,选择“JRE1.4.2_18”图(三)单击“Next>”,选择安装路径即可完成。

三、客户端设置单击“开始|程序|Hansky|Firefly Client Setting”,窗口显示如图(四):图(四)在“Please select a language”下拉框内选择Chinese(PRC)。

之后,单击License图标。

如图(五)所示,在License Server host输入框内输入License Server的IP地址,通常为 Firefly服务器IP地址。

图(五)四、性能优化为提高Firefly Client访问服务器的速度,在C:\WINDOWS\system32\drivers\etc目录下Hosts文件的结尾处增加两行文字,内容如下:228.200.200.201 <TAB> 228.200.200.201Firefly应用服务器IP地址 <TAB> Firefly应用服务器IP地址:182.180.49.25修改后重启计算机。

―――――――――――――――――――――――――――――――――――――――对FireflyClient进行设置,工具-选项-文件操作:五、增加用户或修改密码在浏览器地址栏输入“http:// Firefly服务器IP地址:8082”,使用用户名、密码登录,界面显示如下图(六),单击上角的“编辑”按钮,在密码输入框输入新密码即可。

Firefly基本操作

Firefly基本操作
12
Firefly配置
License设置:192.168.1.242
13
Firefly配置
语言设置:中文或英文
14
目录
❖ Firefly客户端应用组成 ❖ Firefly用户管理 ❖ Firefly配置 ❖ 项目初始化 ❖ Firefly工作区管理 ❖ Firefly与Eclipse的集成 ❖ 项目度量方法
bringover提交工作管理员权限报表17项目初始化文件级权限设置可继承亦可不集成权限18项目初始化初始化工作区fireflyclient选项在web界面中设置权限赋给代码审核人员查看权限19目录项目度量方法20firefly工作区管理导入工作区21本地变更操作sourcecontrol变更集操作案例22本地变更操作sourcecontrol如果内容未改变则不形成变更即不产生新版本23本地变更操作撤消自上次保存本地变更或者编辑之后所有的变更将一个或多个文件或目录移动到某指定的目录下文件版本增加在线模式下上传移动变更至中继工作区24本地变更操作在线模式下上传回滚变更至中继工作区25本地变更关系26本地作工区基本开发操作提交变更集27初始化工作区选择服务器设置主机28初始化工作区选择项目29初始化工作区选择分支30初始化工作区选择本地目录建立工作区后立即执行bringover31初始化工作区初始化32初始化工作区工作区界面工作区目录树菜单栏变更集其它工具栏文件列表33初始化工作区工作区界面文件列表本地检出和变更标志文件图标本地版本分支版本分支检出分支锁定本地变更34bringover菜单
➢ 将一个或多个文件或目录移动到某指定的目录下,文 件版本增加
➢ 移动变更保存在本地工作区,未提交至分支 ➢ 在线模式下,上传移动变更至中继工作区
24
本地变更操作

Firefly基本操作-PPT精选文档

Firefly基本操作-PPT精选文档

13
目录
Firefly客户端应用组成 Firefly用户管理
Firefly配置
项目初始化 Firefly工作区管理 Firefly与Eclipse的集成 项目度量方法
14
项目初始化
创建项目 设计分支 导入项目文件 项目组成员和角 色 人员权限
分支权限 ACL权限
Firefly与Eclipse的集成
项目度量方法
19
Firefly工作区管理
建立工作区 编辑工作区 删除工作区 卸载工作区 导入工作区
20
本地变更操作
本地变更操作(单个文件)
添加文件至版本控制(add to source control) 删除(delete) 编辑(edit) 保存本地变更(delta) 撤消编辑(unedit)
– 工程师 • Bringover, 提交, 工作 区 – 质量管理员 • Bringover • 管理员权限(报表)
16
项目初始化---文件级权限设置
支持基于用户组设置权限 一般策略可基于目录设定 支持对单个文件设定 可继承、亦可不集成权限
17
项目初始化---初始化工作区
• Firefly client 选项
Firefly Client(最终用户)
Firefly Client是为Firefly所有最终用户而设 计的工作界面,用于管理每天的工作。在 这一界面中,Firefly最终用户不仅可以管理 本地工作区,而且可以连接Firefly服务端, 使本地工作区中的文件与服务器端保持一 致。
6
Firefly命令行界面(高级用户)
移动/重命名(move/rename)

Firefly 配置管理工具常见问题FAQ

Firefly 配置管理工具常见问题FAQ

中国光大银行信息科技部配置管理平台常见问题FAQ版本V1.0文档编号保密等级作者最后修改日期审核人最后审批日期批准人最后批准日期修改记录目录1 导言 (1)2 Firefly Clien常见问题 (1)2.1 安装常见问题 (1)1)安装firelfy 客户端,需要先安装java1.4+ (1)2)在windows下安装完firefly客户端后,打不开firefly客户端 (1)3)安装完firefly客户端后,运行程序时报:“The type initializer for‘com.hansky.apps.firefly.gui.fe.FileExplorer’threw an exception.”; (1)并且在配置Firefly Client Setting后保存时,报“Save license configuration file failed” (1)4)安装完firefly客户端后,运行程序时报:“Unable to load DLL(vjsnativ)” (2)5)英文Windows 2003 SP1无法打开Firefly客户端安装文件,无法进行客户端安装 (2)2.2 客户端连接服务器常见问题 (2)1)Firefly 客户端连接不到Firefly 服务器 (2)2.3 使用常见问题 (3)2.3.1 WINDOWS (3)1)本地工作区变更集丢失,变更集锁定,或网页变更集中显示的内容与工作区不符 (3)2)如何永久删除本地工作区 (3)3)如何找回丢失的文件 (4)4)打开工作区时出现“不能打开工作区,另一进程正在使用”错误 (5)5)不能初始化本地工作区,出现权限限制提示 (5)6)修改目录名称 (5)7)如果不想提交隐藏文件,如何操作? (5)8)出现error:找不到存储库 (6)9)用客户端解决冲突时选择手工解决,需要手动复制黏贴代码,会带来错误隐患 (6)10)打开工作区报“An unhandled exception has occurred in your application....” (6)11)在解决合并冲突后用户没法checkin新的变更状态 (9)12)执行bringover过程中报错:“gidif:reach EOF in original,expect more data.” (9)并且日志的最后几行显示:“Error 65687: File type error . Bringover cancelled” (9)13)bringover对话框中,文件图标显示为: (10)确定后出现提示:“An unhandled exception has occurred in your application....”. (10)14)用户提交的文件不存在或“类型错误” (11)15)“添加到版本控制”中不能直接检入 (11)16)如果一次提交三万个以上文件,系统会产生错误 (11)17)提交文件时,提示“输入注释” (11)18)使用firefly的windows客户端查看文件历史版本 (11)19)使用firefly的windows客户端进行文件版本之间的比较 (12)20)删除文件、添加同名该文件,重复多次,无法提交到服务器也无法撤销操作 (13)21)设定Firefly client超时门限 (13)22)文件名大小写 (13)23)命名避免使用的字符:~ # & ( ) ; , * : " < > \ ? . / (13)24)关于文件过滤 (13)25)打开客户端时报初始化错误,报q9,配置服务器license报“保存配置错误” 1426)如果不小心做了撤销编辑操作,如何找回之前修改的文件? (14)2.3.2 UNIX / LINUX (14)1)初始化工作区失败,报错:”Can't create workspace under an existing one” (14)2)使用firefly的unix客户端查看文件历史版本 (14)3)使用firefly的unix客户端获取文件历史版本 (15)4)使用firefly的unix客户端进行文件版本之间的比较 (15)5)提交后查看历史时,显示乱码,如下所示,查看该文件的注释也是乱码 (15)6)关键字转换 (15)7)在工作区中执行bringover报错,报“ng.NullPointerException” (15)3 Firefly Server Explorer常见问题 (15)1)查看某项目配置库中已检出的文件 (15)2)在启用文件级访问控制的情况下,更换服务器后,用户更新文件的权限失效 (16)3)添加或编辑文件时出错,Error 65748:ACL Denied (16)4)无法下载标记 (17)5)手工查找文件建立标记容易出错 (17)6)使用命令下载标记 (17)4 集成Eclipse操作常见问题 (17)1)如果不小心删除了文件,如何找回? (17)2)在Eclipse中安装Firefly插件之后,"Firefly"菜单不出现,如何解决? (17)3)安装Firefly插件,绑定Firefly后,文件没有显示文件控制图标和版本号 (17)4)在Eclipse中文件冲突,解决冲突时选择手动解决,报错:merge tools not found。

Firefly unix常用命令操作指南

Firefly unix常用命令操作指南

Firefly unix常用命令操作指南All rights reserved 版权所有,侵权必究文档修订记录*变化状态:A——增加,M——修改,D——删除目录1 综述 (3)2 Firefly Client的参数设置 (3)3 项目初始化 (3)4 Firefly工具基本命令的使用 (4)4.1 Bringover命令(更新本地工作区文件) (4)4.2 编辑命令(检出文件) (5)4.3 添加到版本控制命令(将新建的文件添加到本地工作区中) (6)4.4 删除、移动和重命名命令 (7)4.5 提交Default变更集命令(检入文件) (8)5 Firefly工具高级命令的使用 (9)5.1 显示文件历史命令 (9)5.2 版本比较命令 (9)5.3 下载标记命令(项目配置管理员使用) (10)5.4 建立标记命令(项目配置管理员使用) (10)1综述开发人员具有项目组开发库中相应配置项的权限;日常开发过程或由于变更需要进行配置项修改时,应从开发库中检出配置项到本地工作区进行修改;配置项的命名要按照项目《软件配置管理计划》中制定的配置项命名规范来进行;修改期间要每日将修改的配置项检入到配置库中,以保证工作成果。

本文描述了项目成员在开发工作中常用Firefly unix命令的使用方法。

2Firefly Client的参数设置hff set license.server=10.1.16.33项目初始化开发人员在工作前需要将配置项从Firefly的存储库中下载到本地工作区,然后在本地工作区中进行修改。

操作命令:hff init -h <服务器地址> -proj <项目名称> -p <开发库> -u <用户名> -pwd<密码> -d <指定本地工作区的目录,默认为当前目录>例:服务器地址为“10.1.100.62”,准备在d:\test目录下建立一个本地工作区,项目名称为“ECAS_test”、开发库为“develop”,操作如下:hff init -h 10.1.100.62 -proj ECAS_test -p develop -u <用户名> -pwd<密码> -d d:\test如下所示:是否使用SSL?[y/N] 选择N;端口号:[4759] 按回车默认即可;描述:填写注释并按回车;本地工作区建立成功;确实要从父分支执行bringover操作吗?[Y/n]◆填写Y,则执行bringover操作,从父分支上把该分支下的全部内容下载到本地工作区,完成创建本地工作区的操作。

firefly问题解决方法

firefly问题解决方法
5.Firefly client无法启动
解决方法:
可以在"%Hansky%\Firefly\Client\bin"目录下新建一个"firefly_client.exe.config"文件,包括如下内容:
<?xml version ="1.0"?>
<configuration>
<startup>
<supportedRuntime version="v1.1.4322" />
F5刷新项目,或者对项目进行重新邦定。
9.eos显示不能在离线模式下更新文件
解决方法:
对工作区进行解绑定后重新绑定。
10.更新无法进行的原因:
1)有文件正在被编辑:将被编辑的文件提交或者撤销编辑后重新更新。
2)文件又冲突:按照提示解决冲突。解决冲突是采用父版本为保存服务器版本到本地,采用子版本为保存本地版本到服务器。
10.firefly client打开出现以下异常:
时区设置问题,修改时区为中国时区。
11.Firefly文件提交后服务器没有更新。
解决方法:
因为网络或者其他原因,firefly对文件进行处理时可能出现中断,文件可能只保存本地没有提交服务器,请各位同事每天下班前检查一下firefly客户端下的我的变更集,如果有未提交的文件,请手动提交。
1.Firefly运行速度慢
解决方法:
在C:\WINDOWS\system32\drivers\etc\hosts文档最后一行添加
10.232.2.19 10.232.2.19
228.200.200.201 228.200.200.201

Firefly系统产品说明书

Firefly系统产品说明书

Galleria/Crossfit/Beyond V4Revision 2 \The information contained in this manual is a general overview of the Firefly system and is subject to change at any time.2 Table of Contents3 Lyra Screen Overview4 Home7 Lights8 Auto Gen Start (AGS)9 Climate Control10 Settings11 Settings/Mobile App12 Vegatouch Mira Setup16 Wireless Switch Pairing17 Settings/Network Diagnostics18 Settings/Manufacturer Options19 G8 DC Panel20 Networking21 Network Status Indicators22 Mira NET LED Status Key23 System DiagramsTap any icon from the vertical navigation menu to select the desired page. The currently selected page will always be listed in the top corner of the screen.HomeAuto GenLightsClimateSettingsNavigation MenuThe Light Master controls all interior lights at once. When Light Master Off is pressed, it will remember which lights were on. Then, when Light Master On is pressed, it will only turn on the lights that are in memory. To turn on all lights again, press and hold Light Master On for at least one second.*Troubleshooting – Memory is rewritten each time Light Master Off is pressed. In the case that it is pressed twice in a row, it will remember that no lights were on and just touching Light Master On won’t turn on any lights. Press and hold Light Master On to turn the lights back on. Awning – Press and hold EXT or RET to operate the awning (ignition must be off).Set Temp – Tap the arrows to set your desired temperature.Current temperature and current HVAC mode icons with fan speed indicator – A Blue Snowflake will display for Air Conditioning and a White Fan graphic will display for Fan Only mode. H or L will indicator the fan speed (High or Low). 22114334Water Tank Readings:•9% and below will read “Empty ” and the tank level will show Empty.• From 10% to 90%, the tank level andpercentage will show as normal. • 91% and above will read “FULL .” andthe tank shows accurate level.LP Tank Readings:•Below 25% will read “Low” and the tank level will show as normal.• From 25% to 75%, the tank level andpercentage will show as normal.• From 75% to 96%, will read “Full” andthe tank level will show as normal. • 97% and above will read “Disc.” andthe tank level will be empty.These graphics represent the holding tanks filledstatus.Propane % remaining.Water Pump – Tap to toggle On/Off.If the tanks are disconnected the readings will display as shown.FULLAGS WARNING – to ensure safety, AGS will not be activated until you hold the Enable button (from the Warning screen) for at least 3 seconds.Press and Hold the gen hours display to enter the Set Gen Hours screen. Tap the buttons to enter your desired hours then tap Yes to save and exit.House Voltage – the voltage coming from your housebatteries. Note: Battery graphics will display Red if below 12V.Chassis Voltage – the voltage coming from your engine battery. Generator Start - hold Start to start the generator (1 second delay). Generator Stop – Hold Stop to stop the generator.Tap to Enable/Disable AGS.5If AGS is enabled before the coach is connected to shore power, the Shore Override status message will bedisplayed and AGS will be disabled. AGS willautomatically re-enable once shore power has been disconnected.566This screen will control the lighting for the entire coach, including the exterior. Tap any button to turn the desired light On/Off.Lights with up/down arrows are dimmable. Press and hold these buttons to ramp the brightness up or down. Tap the buttons to toggle On/Off.Tap to Enable/Disable AGS. A Warning screen will require action to enable. Trigger Options – Automatically start the generator using specified voltage settings (Low Volts) or when A/C or Heat Pump start (HVAC). Select one or both triggers. If no triggers are selected, AGS will not run.Gen Hours Display - The number of hours that the generator system has been used. These hours are saved to the system, not the generator itself. Press and hold to enter the Set Gen Hours screen.Quiet Time Start and Stop – Tap the +/- buttons to select the hours that your generator will not run.Start at Volts - The generator will start when the voltage drops to this set point depending on “Time a t Volts” setting below. (Range 10.5v – 12.5v)Time at Start Volts - The generator will start when the voltage drops to the “Start at Voltage” for this specific amount of time. (Range 5 seconds – 1 min) Stop at Volts - The generator will shut off when the voltage reaches this set point depending on “Time at Stop Volts” setting below. (Range 13.2v – 14.5v)Time at Stop Volts - The amount of time required for the voltage to remain at “Stop at Volts” level before the generator shuts off. (Range 5min – 120 min) Minimum Gen Run Time - Use the + and – keys to set the minimum amount of time that your generator will run once it has started. (Range 10min – 30min)Maximum Gen Run Time - Use the + and – keys to set the maximum amount of time that your generator will run once it has started.(Range 120min – 240min)Gen Start Retries – select the number of times that the generator will retry to start if it fails to start on the first attempt.Default OptionTap the arrows to select your desired temperature (Set Temp). A Snowflake graphic with fan speed indicator (H or L) will display during Cool mode.Cool – Tap to operate the air conditioning. The A/C will run until the current temp reaches your desired temp and then shut off.ProAir OptionIn this option, tap Auto to have the system automatically control the fan speed, or drag the slider to select a fan speed percentage. There will be no H or L fan speed graphic in this mode.Fan Mode – The fan will operate by choosing High or Low. Auto will turn the fan off. If Cool has not been selected, the fan speeds will enable Fan Only mode.1112 34657 89Tap to navigate to the Vegatouch Mira connection screen.Tap to navigate to the Network Diagnostics screen. 1 2 3 Tap to navigate to the Manufacturer Options screen. 4 Wireless switch panel display status5 Tap to select between Fahrenheit and Celsius. Drag the Slider to adjust screen brightness.6 When Auto Dimming is enabled, the screen will enter sleep mode after 60 seconds of inactivity. Tap anywhereon the screen to wake it up. Please note that even if Auto Dimming has been disabled, the screen will still enter sleep mode after 4 hours of inactivity during daytime hours (5am – 10:59pm) and after 15 minutes of inactivityduring night time hours (11pm-4:59am) as the result of a built in screen saver that cannot be disabled.7Tap to disable the touchscreen for 15 seconds for the purpose of cleaning. Tap the buttons to set the time or select 24-hour time mode. 8 9Please note the GUI and Logic Controller Versions and have these numbers available before contacting Tech Support.Vegatouch Mira is a wireless control module that easily connects to any Android or iOS device to give total control to many electrical, electronic and mechanical systems in your coach. Pair any device with the coach’s built -in interface to monitor and control many coach components.Notice: Make sure that Bluetooth is turned ON in your smart device settings before proceeding.Locate the Login Information:The login information can be found byclicking on the Mobile App button onthe settings page of the touchscreenor from the Mira module’s label.Download:Download Vegatouch Mira from the Google Play store or the App Store.Once the download has finished, install the app and open it.Setup:Tap SCAN to find the Mira Module’s signal. After scanning, any Mira Module in your area will appear on the screen. Tap the ID # that matches the one on your Mira label. Enter the PIN number from the Mira label and press AUTHENTICATE to connect to the system.Notice: iOS Setup TipsTurn on Bluetooth to allow Vegatouch Mira toconnect to Accessories.If you do not have Bluetooth turned ON in your iOS settingsyou will see this screen. Do not click OK, you must clickSETTINGS. Your Bluetooth Settings page will now appear andyou should turn Bluetooth ON.Notice: Android Setup TipsAllow Vegatouch Mira to access this device’s location.Mira will need to be allowed access to your location. Click ALLOW when you see this screen.App Settings:Access the App Settings page by tapping the triangle (at the bottom of the screen) to expose theSettings button. Tap the gear to visit the settings page.Tap to Temperature Units selection tochoose between Fahrenheit and Celsius.System Information and Mira Name.Tap to disconnect your device from Mira.Tapping Update Config will force adownload of the config from the cloud.Tap to enter the Diagnostic Tools screen.Diagnostic Tools:Tap to display a list of currentlyconnected devices.Remote Help is available by calling FireflyIntegrations. Do not enable remote helpwithout consultation.The switch Battery Graphic will identify the status of the wireless switch panel. Green battery switch indicator – the switch is currently conencted to the screen.Red battery switch indicator - The switch is currently disconnected from the screen. It is likely that the battery inside your switch panel needs replaced. The wireless switch panel in your coach will illuminate a green LED whenever a button is pressed. If the LED on your switch panel does not illuminate when you press a button on your switch, you will need to replace the 2032 coin cell battery. If a new battery will not fix the issue, you might need to pair the switch panel to the screen.Press and Hold the battery graphic for 3 seconds until the pairing screen appears.Tap Start Pairing. You’ll have 30 seconds to press any 2 buttons on the switch panel at the same time. Tap Done once the pairing successful message appears. It may take up to 10 minutes for the wireless switch indicator to turn Green, but the switch should work instantly once paired.1 2 322 Time Remaining13Devices/InputsThe Network Diagnostics screen will display the status of the touchscreens, the G8 panel and the Aircon. It will also identify any currently active faults.Green = OnlineG8 OutputsThis screen will identify which individual G8 outputs are currently active.Green = ActiveTap the squares to enable or disable the options required for your specific vehicle.The G8 control DC Panel receives the signals sent from your switch panels and performs the actions that have been requested by activating and deactivating the required circuits.Every circuit controlled by the G8 is numbered and listed on a black label (load list) which is usually mounted next to the G8 panel. A corresponding numbered LED will illuminategreen whenever a particular circuit is on. For instance, if you press the Bath Light button on your switch panel, the green LED for output 11 will illuminate and the Bath Light will turn on (Fig 3).Testing output voltage using a Multi-meter.Ensure that the G8 circuit is on and that the corresponding green LED is illuminated.To test the output voltage for the Ceiling Lights example, touch the positive lead to the output pin for output 11 (Connector J9 – Pin 1) and the negative lead to the ground stud (as pictured below).Fig 3Fig 4ANET LEDGROUND Test Positive Output Channels as shown:Multi-meterYour distribution panel and touchscreens are connected via your coach’s RV-C network. Each component will have a NET LED that is used to show network status. If a NET LED is displaying anything other than solid green and some of the panel’s functions are not working, please contact your manufacturer for Technical Support.Net LED Locations:Back ofG8TouchscreensEvery component of the Firefly system uses an LED to communicate network status. Use the key below to determine the network status of your hardware. *Panel Network Status Indicator – Applies to any device with a network indicator:/ Fast flashing Green Light (4 times/sec) – Device is attempting to make initial connection./ Slow flashing Green Light (1 time/sec) – Device was online but has been offline for at least 5 sec. Solid Green – Device is connected to network and is communicating properly.Solid Red – Device has gone offline and is not connected to a network./ Alternating Red & Orange – Device has gone offline and is trying to re-connect (within 30 sec). / Alternating Green & Orange – Device is currently online but has gone offline 2 or more times*Note: Mira modules use a different networking key. Please see the next page.The NET LED on your Mira module can change color in different situations. Use the following key to determine the operational status of your Mira module.Off Device has no power or has completely failedFast flashing green (4 times/sec) Device is attempting to make initial connection tothe CAN network and good filesSolid green Device is operating correctly and has seen a CANmessage in the past 5 seconds and good files Slow flashing green (1 time/sec) Device was active on the CAN bus but has not seen avalid message in 5 seconds and good files Alternating red and yellow Device has not seen CAN messages in 30 secondsand good filesAlternating yellow and green Device is currently active on the CAN bus but has notseen a CAN message within a 30s interval 2 for moretimes since the last power cycle and good files Solid red Device has not seen a CAN message in the past 60seconds and good filesFast alternating green and blue (4 times/sec) Device is attempting to make initial connection to the CAN network and corrupted filesSolid blue Device is operating correctly and has seen a CANmessage in the past 5 seconds and corrupted filesSlow alternating green and blue (1 time/sec) Device was active on the CAN bus but has not seen a valid message in 5 seconds and corrupted filesAlternating red and blue Device has not seen CAN messages in 30 secondsand corrupted filesAlternating yellow and blue Device is currently active on the CAN bus but has notseen a CAN message within a 30s interval 2 or moretimes during a power cycle and corrupted filesSolid purple Device has not seen a CAN message in the past 60seconds and corrupted filesFlashing white Device pin is being resetSolid yellow Device pin has been resetFlashing blue Device does not have a valid applicationFlashing red (2 seconds) Factory test: Red LEDFlashing green (2 seconds) Factory test: Green LEDFlashing blue (2 seconds) Factory test: Blue LED。

adobefirefly使用方法

adobefirefly使用方法

adobefirefly使用方法
Adobe Firefly 是Adobe 推出的一款基于生成式AI 技术的应用程序,它允许用户通过简单的文本提示来创建图像、编辑图片或实现各种视觉效果。

以下是使用Adobe Firefly 的基本步骤(基于2023年提供的信息):
1. 账户与登录:
-访问。

-如果您已有Adobe 账户,请直接登录;如果没有,您可以免费创建一个新账户。

2. 启动应用程序:
-登录后,进入Firefly 的工作界面。

3. 文字输入与图像生成:
-选择“以文字建立影像”选项,这将打开一个工作区。

-在此区域内,根据提示输入想要生成的图像的文字描述,可以是具体的物体、场景描述或者艺术风格等。

-提交文本后,Firefly 将利用其内置的GAN 技术根据您的描述生成相应的图像。

4. 编辑和调整:
-对于更精细的编辑功能,如新增或移除对象、风格迁移等,可能需要在Firefly 或与之集成的其他Adobe 应用程序(如Photoshop 等)中进一步操作。

5. 导出与分享:
-完成图像创作后,可以选择保存并导出生成的图像到本地计算机或其他支持的平台进行分享或后续编辑。

请注意,随着时间的推移,Adobe 可能会不断更新Firefly 的功能和服务,因此实际的使用体验可能会有所变化。

建议直接访问Adobe Firefly 的官方页面获取最新的使用教程和指南。

fireflyiii 使用手册

fireflyiii 使用手册

FireflyIII 使用手册FireflyIII 是一款开源的个人财务管理软件,可以帮助用户管理个人财务,包括收入、支出、存款、投资和负债等方面。

本手册将介绍如何使用FireflyIII,以便让用户更好地了解这款软件。

1. 简介FireflyIII 是由 Firefly III Foundation 开发的一款开源的个人财务管理软件,它可以帮助用户追踪和管理个人账目、预算和账单。

该软件支持多种货币、银行账户和投资账户,并且提供了丰富的报表功能,可以帮助用户更好地了解个人财务状况。

2. 安装和配置要开始使用FireflyIII,首先需要安装和配置该软件。

用户可以选择在自己的服务器上安装FireflyIII,也可以选择使用 Firefly III Foundation 提供的上线服务。

安装好后,用户需要根据自己的需求进行配置,包括添加银行账户、投资账户和设定预算等。

3. 添加账目在开始使用FireflyIII 管理个人财务之前,用户需要先添加账目。

账目包括收入、支出、存款、投资和负债等。

用户可以通过简单的界面来添加账目,并可以设定相应的分类和标签,以便更好地管理。

4. 追踪账目一旦添加了账目,用户就可以开始追踪这些账目的变化。

FireflyIII 提供了直观的界面和丰富的图表,可以帮助用户了解自己的财务状况,包括收入来源、支出去向、资产负债情况等。

5. 设置预算为了更好地控制支出,用户可以在FireflyIII 中设定预算。

用户可以为不同的类别设定不同的预算,比如食物、交通、娱乐等。

软件会根据用户的预算情况自动生成相应的报表,以便用户更好地了解自己的支出情况。

6. 导入账单为了更好地管理个人财务,用户可以将自己的银行账单导入到FireflyIII 中。

该软件支持多种格式的账单导入,比如 CSV、OFX、QIF 等。

用户可以在随时查看自己的账单,并进行必要的调整和修正。

7. 报表功能FireflyIII 提供了丰富的报表功能,可以帮助用户更好地了解自己的财务状况。

WildFly配置指南及管理员手册

WildFly配置指南及管理员手册

JBoss4 特性: JBoss4.2 必须需要安装 jdk5 JBoss Ejb3 默认被安装 JBoss 的 web 容器使用 JBoss Web v2.x (集成 tomcat6) deploy/jboss-web.deployer deploy/jbossweb-tomcat55.sar JBoss Transactions v4.2 为默认的事务管理器 JBoss WS 提供 web service 功能 JGroups/JBossCache 支持 channel multiplexing JBoss Remoting 更新到 stable 2.2.x,JBossMQ(JBoss4.0 使用)为默认 JMS 实现,但是可以使用 JBoss Messaging 替换。 EJB 调用方式 由 rmi-invoker 替换为 JBoss Remoting 的 unified-invoker log4j 和 commons-logging 升级到新版本。 目 录 替 换 了 原 先 的
WildFly 配置指南及管理员手册
1. jboss 各主要版本特性 1.1. jboss4 特性
JBoss4 包括 web 服务器(servlet/JSP 容器,HTML 服务器)、EJB2.0 容器。完 整的纯 Java 的数据库引擎,(Java 消息服务)JMS,JavaMail,和 Java 事务处理 API/Java 事务处理服务 (JTA/JTS) 支持。 早期的 JBoss 使用了 Apache Tomcat Web 服务器,但在 JBoss4.0 中已经吧 Apache Tomcat 内嵌到 JBoss 中了。后续又集成 Java 数据对象(JDO),对于 JMS 多点传送机制支持的修补,对 J2EE1.4 的完全实 现和分布式事务机制。 JBoss 的应用服务器控制和配置-JMX 机制,运行一次可以部署所有的组件 和服务。资源属性和可配置参数可以通过 MBeans(可控制 beans)映射和更改, 这些控制可以在 JBoss 的控制台进行设置。 一旦我们的 servlet-based 的应用程序 被部署,JBoss 就自动安装一个部署 MBeans,这个 MBeans 会被添加到 JMX 控制 台的导航菜单中。通过这个 MBean 就可以部署或卸载 WAR 应用程序,或查看 应用程序相关的属性。 JBoss 4 基于 JBoss 3.2,在 J2EE 标准特性方面,主要的改进包括: JBoss 4 是业界第一家取得正式 J2EE 1.4 认证的应用服务器,完全符合规 范的 J2EE 标准。 完全支持 J2EE web services (JAX-RPC 方式和 WS4EE 架构方式) 和 SOA。 支持 AOP 模型,JBoss Aop 极大的提高了生产力。 与 Hibernate 紧密集成。 通 过 一 个 内 建 的 Caching 构 架 提 升 集 群 功 能 和 分 布 式 Caching (TreeCache) 。 JBoss4 完全遵循 J2EE1.4 标准,所以允许开发者在不同的应用服务器上重用 J2EE 组件(如 EJB 等) ,比如可以轻易的将部署在 Weblogic 或 Websphere 上的 EJB 迁移到 JBoss 上赖,JBoss4 比 JBoss3.2 实现了下面几个新的 J2EE 标准:

firefly说明书

firefly说明书

数字监控系统使用手册目录服务器篇 (5)引言 (6)编写目的 (6)定义 (6)软件概述 (7)目标 (7)功能 (7)性能 (8)时间特性 (8)灵活性 (8)运行说明 (9)环境支持 (9)相关硬件 (9)主机端 (9)客户端 (9)支持软件 (9)运行过程 (9)注意事项 (9)过程文件 (10)使用说明 (10)安装和初始化 (10)驱动程序安装 (10)应用软件安装 (11)初始化 (11)操作详述 (11)主界面 (11)系统设置 (13)当前设置通道选择 (13)自动登录 (13)自动关机 (14)预览参数 (14)录像参数 (15)报警 (17)自动录像工作表设置与应用 (20)云台 (21)网络 (22)预览图像的缩放 (24)图像抓取 (24)启动和关闭录像 (24)云台操作 (24)启动和关闭报警 (25)报警区域设置 (25)用户管理 (26)主机用户 (26)网络用户 (27)回放资料选择 (27)回放 (29)日志 (31)磁盘 (31)其他功能 (32)语音对讲 (32)聊天室主机 (32)聊天室客户端 (34)网络信息: (35)多语种支持 (35)部分区域遮挡功能 (36)矩阵 (36)快球预置点设置 (37)出错及恢复 (37)找不到视频卡 (37)不能启动正常预览 (38)软件启动立即报告错误 (38)录像产生大尺寸文件 (38)主机录像文件回放时有马赛克 (38)程序文件和数据文件一览表 (39)服务器端 (39)用户操作举例 (40)网络篇 (41)引言 (42)编写目的 (42)定义 (42)软件概述 (43)目标 (43)功能 (43)性能 (43)时间特性 (43)灵活性 (44)重要说明 (44)界面风格及操作方式 (44)网络系统分级结构 (44)服务器主机 (44)客户端 (45)典型网络应用 (45)一般应用 (45)复杂应用 (45)运行说明 (46)环境支持 (46)相关硬件 (46)客户端 (46)支持软件 (46)运行过程 (46)注意事项 (46)过程文件 (46)使用说明 (47)安装和初始化 (47)应用软件安装 (47)初始化 (47)操作界面概述 (47)主界面 (47)系统设置 (48)通道设置 (48)用户密码 (50)客户认证 (50)其他 (51)控制主机 (52)启动和关闭预览 (53)预览图像的缩放 (53)图像抓取 (53)启动和关闭录像 (54)云台操作 (54)观察服务器报警 (54)回放资料选择 (55)日志 (55)磁盘 (55)自动切换 (55)其他功能 (56)出错及恢复 (56)不能启动正常预览 (56)软件启动立即报告错误 (57)录像产生大尺寸文件 (57)客户端预览画面及录像文件回放时有马赛克 (57)客户端预览有动画感 (57)程序文件和数据文件一览表 (58)用户操作举例 (58)服务器篇用户名:super、密码:无;引言编写目的本手册征对最终用户,详细说明数字监控系统的使用及维护方法。

个人整理Firefly史上最全的常见问题解决方案

个人整理Firefly史上最全的常见问题解决方案

配置管理工具常见问题FAQ版本 V1.0修改记录目录1 导言 (1)2 配置管理工具的常见问题 (1)2.1 客户端安装 (1)2.2 firefly 客户端与firefly 服务器连接 (2)2.3 本地工作区常见问题 (2)2.4 提交文件 (5)2.5 firefly服务器IP地址发生变更 (5)2.6 启用文件级权限控制 (6)2.7 建立标记及设置标记权限 (6)2.8 文件历史版本及版本之间的比较 (6)2.9 配置库操作历史 (9)2.10 集成Eclipse操作 (11)2.11 其它 (11)3 配置管理服务器的常见问题 (13)4 Firefly在连接服务器时候的问题 (14)1导言本文档描述了在Hansky Firefly使用过程中,可能遇到的一些问题以及解决方法,作为使用Firefly的参考资料和指南。

本文档要时时维护,新遇到的问题随时添加,以便起到真正的指导作用。

其中红色字体为:项目组成员在使用过程中经常出现的问题。

2配置管理工具的常见问题2.1客户端安装1)在unix下安装firelfy 客户端,需要先安装java1.4+2)在windows下安装完firefly客户端后,打不开firefly客户端原因:有可能是因为电脑里存在多个Framework 版本(要检查是否存在多个版本,在“控制面板”中的“添加/删除程序”里查看)解决:方案一:把“多个版本.Net Framework配置文件”文件夹下的4 个config文件复制Firefly 安装目录下的\Client\bin目录中即可。

补充:在给的安装包里面有一个叫:多个版本.Net Framework配置文件的文件夹,里面有安装程序的四个配置文件client_setting.exefirefly_admin.exefirefly_client.exeserver_explorer.exe 以上是四个文件的名称!把这个四个文件拷贝到firefly安装目录下的\client\bin文件夹下方案二:在“控制面板”中的“添加/删除程序”,删除掉以前安装过的 .Net Framework,,然后再安装.Net Framework 1.1版本2.2firefly 客户端与firefly 服务器连接1)Firefly 客户端连接不到Firefly 服务器原因:a)网络连接;b)firefly client setting问题c)License Server 设置d)本机系统时间,客户机操作系统时间应与Firefly服务器时间偏差不能超过24小时。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

Firefly客户端使用说明
1、安装说明
Firefly是一款国内使用较为简单的配置管理工具。

安装文件路径:\\192.100.89.1\软件\开发工具\Hansky\Firefly client
2、使用说明
访问方式:
1)客户端方式,通常开发人员只需使用firefly client,可不必关心其他部件的使用。

2)web方式,还有一种方式可访问项目,这种方式只可查看项目相关信息,分支
情况以及文档情况,不可编辑。

URL:http://192.100.89.72:8081/
下面简单介绍一下这两种方式的使用方法:
客户端方式:
1)连接服务器,初始化本地工作空间
首先,在开始->所有程序->Hansky->Firefly client setting中,做如下设置:License server host:192.100.89.72
Serial Number留空。

然后,在开始->所有程序->Hansky->Firefly client,出现客户端界面,下面我们就可以连接服务器,初始化本地工作空间,进行工作了:
File->New Workspace,出现建立本地工作区向导,然后add,出现add server的界面,在Host里输192.100.89.72,Display Name可自己设置,port取默认值.
User name和password请向管理员问询.
接着,建立工作空间,选取自己所在的项目,然后选择分支(一般,开发人员工作在DEV分支).
这里,我们建议最好在本地专门建一个目录,专门存放firefly的工作空间,不同项目选用子目录存放.如(workspace目录下包含子目录:用户名_项目名1_DEV, 用户名_项目名2_DEV).这样方便管理本地工作空间.
2)将项目文件/数据加入到工具中
初始化好工作空间后,下次就可以直接open workspace来继续自己的工作.初次工作需要将自己的文件加入到firefly中去.
方法如下:将需要加入的文件目录拷贝到本地工作区相应的workspace下或者直接拖到firefly中。

然后将整个目录add to source control.这样,目录下所有的文件将递归被加入到firefly中.
注意:空的目录不能被导入。

3)使用工具checkout,checkin文件.
具体可参见Firefly_quickstart.pdf->使用firefly->并发开发.
web方式:
用户名和密码与client相同,使用比较简单,可自行去查看项目相关信息。

相关文档
最新文档