货物销售合同中英文范本
销售合同英文范本6篇
![销售合同英文范本6篇](https://img.taocdn.com/s3/m/4250c26d3868011ca300a6c30c2259010202f390.png)
销售合同英文范本6篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is the owner of a certain quantity of goods described in this Contract and desires to sell and the Buyer agrees to buy the same on the terms and conditions stipulated below:1. PRODUCTS AND QUANTITYThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Specify the product name, model number, specifications, quantity, etc.] The total quantity to be sold and purchased shall be clearly stated in the invoice.2. PRICE AND PAYMENTThe price of the goods shall be as per the list attached to this Contract. The total amount payable by the Buyer to the Seller shall be [specify the total amount]. Payment terms are as follows: [Insert terms such as deposit payment prior to delivery, full payment upon delivery, etc.] All banking fees shall be borne by the party designated for payment.3. DELIVERY AND TIME OF DELIVERYThe Seller shall deliver the goods to the Buyer at the agreed place of delivery within [specify a reasonable time frame]. Any delay in delivery must be notified to the Buyer in writing. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.4. QUALITY AND GUARANTEEThe Seller guarantees that the goods are new and of good quality, free from defects in material and workmanship, and comply with all applicable specifications and standards. The Seller shall replace any goods found defective within a reasonable period after delivery.5. PACKAGING AND MARKINGThe Seller shall pack the goods properly and ensure that they are clearly marked with necessary identification marks, labels, and other necessary information. The cost of packaging shall be borne by the Seller unless otherwise agreed by the Buyer.6. INSPECTION AND ACCEPTANCEThe Buyer has the right to inspect the goods during production and prior to delivery. Upon receipt of the goods, the Buyer shall have a reasonable period to inspect and accept or reject the goods in accordance with this Contract. Any rejected goods must be returned to the Seller at the Seller's cost and risk.7. FORCE MAJEURENeither party shall be liable for failure to perform any obligation under this Contract due to causes beyond their reasonable control, such as acts of war, riots, strikes, floods, fire, etc. However, the affected party shall notify the other party promptly in writing and provide evidence of such occurrence.8. CONFIDENTIALITY AND NON-DISCLOSUREBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure and shallnot disclose it to any third party without the prior written consent of the other party.9. TERMINATIONThis Contract may be terminated by either party in writing if there is a breach of any term or condition by the other party that cannot be rectified within a reasonable period of time. Termination shall not affect any obligation that has already been incurred by either party prior to termination.10. MISCELLANEOUSThe Buyer The Seller(Authorized Representative) (Authorized Representative)Date: Date:Signature: Signature:Company Name: Company Name:Address: Address:Telephone No.: Telephone No.:Email Address: Email Address: 邮件地址篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products under the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the specifications listed in Annex A attached to this Contract.2. Quantity and Price:The Seller agrees to sell the products in the quantity specified in Annex A at the prices specified therein. The prices are fixed and firm for the duration of this Contract.3. Terms of Payment:Payment shall be made by the Buyer to the Seller as follows: __% (percentage) of the total contract value upon signing of this Contract; __% (percentage) upon delivery of the goods; and the balance upon receipt of the Seller's performance bond or other guarantee documents. All payments shall be made in the currency specified in Annex B.4. Delivery:The Seller shall deliver the products to the port specified in Annex C within the time agreed upon in this Contract. The Seller shall be responsible for arranging transportation of the goods and shall bear all expenses related to delivery.5. Quality Inspection and Warranty:The Seller guarantees that all products are new and of good quality, free from any defects, and comply with all applicable specifications and standards. The Seller shall provide necessary quality inspection certificates and other documents. The Buyer shall have the right to conduct its own quality inspections at the loading port.6. Packing and Marking:The Seller shall pack the products in a proper manner to ensure safe transportation to the port specified in Annex C. The packages shall be properly marked with contract number, product name, quantity, weight, and other necessary information.7. Risk and Insurance:Risk of loss or damage to the products shall pass to the Buyer upon delivery at the port specified in Annex C. The Seller shall arrange for insurance of the goods during transportation at its own cost. The insurance shall cover at least 110% of the total contract value against all risks commonly covered for such goods. The insurance certificate shall be handed over to the Buyer on delivery of the goods.8. Terms of Settlement for Disputes:篇3SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller,NOW THEREFORE, the parties hereby agree as follows:Article 1: Contract ProductThe product to be sold under this Contract is [describe the product in detail]. The specifications and quantity of the product are listed in the attached schedule.Article 2: Price and PaymentThe price of the product shall be as stated in the attached schedule. The payment shall be made through [specify payment method] within [specify time frame] after the date of delivery.Article 3: Delivery and ShippingThe Seller shall deliver the product to the Buyer at the shipping address specified by the Buyer. The delivery date shall be as stated in the attached schedule. Shipping and transportation risks shall be borne by [specify which party bears these risks].Article 4: Quality and InspectionThe Seller shall ensure that the product meets the quality standards specified in this Contract. The Buyer shall have the right to inspect the product during production and upon delivery. If any defects are found, the Seller shall promptly replace or repair the product.Article 5: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose such information to any third party without the prior written consent of the other party.Article 6: Force MajeureNeither party shall be liable for failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, wars, riots, or government policies, provided that the affected party promptly notifies the other party of such events and takes reasonable measures to mitigate their effects.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [specify duration] for the product. During this period, any defects in material or workmanship shall be repaired or replaced free ofcharge. The Seller shall also provide after-sales service as specified in the attached schedule.Article 8: TerminationThis Contract may be terminated by either party giving written notice to the other party in case of fundamental breach by either party. The party seeking termination shall give reasonable notice and provide evidence of such breach. The provisions of this Contract concerning confidentiality, warranty, and any obligations arising prior to termination shall survive termination.Article 9: Jurisdiction and LawThis Contract shall be governed by the laws of [specify country/jurisdiction]. Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit such disputes to [specify court/arbitration institution] for resolution.Article 10: MiscellaneousThis Contract constitutes the entire agreement between the parties for the sale of the product. No modification or amendment shall be binding unless made in writing and signedby both parties. This Contract is made in [specify language] only, and any translation provided for reference only.IN WITNESS WHEREOF, the parties have executed this Contract by their authorized representatives on the dates specified below.Buyer:(Authorized Representative)Date:Seller:(Authorized Representative)Date:[Note: This is a general sales contract template and may need to be modified to fit specific circumstances.]篇4SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Seller:WHEREAS the Seller is willing to sell the products listed in this Contract to the Buyer, and the Buyer is willing to purchase the same products from the Seller on the terms and conditions stipulated below:1. Products and Specifications:The Seller agrees to sell and the Buyer agrees to purchase the products with the following specifications: [specific details of the products to be sold, including name, model, quantity, quality, specifications, etc.].2. Price and Payment:The total contract price is [specify the total contract price]. The payment terms are as follows: [describe the payment terms, e.g., 30% advance payment, balance upon delivery, payment through bank transfer or other methods].3. Delivery:The Seller shall deliver the products to the Buyer at the following address: [delivery address]. The delivery date shall be [specify the delivery date]. Any delay in delivery shall be notified to the Buyer in advance.4. Quality Assurance:The Seller guarantees that the products are of good quality and comply with all applicable standards. The Seller shall be responsible for any defects in material or workmanship.5. Warranty:The Seller warrants that the products are new and not previously used. The Seller shall replace any defective products or make necessary repairs during the warranty period.6. Force Majeure:In case of force majeure events, such as natural disasters, war, political unrest, etc., which prevent or hinder the performance of this Contract, the Seller shall notify the Buyer immediately and seek to resolve the issue as soon as possible.7. Confidentiality:Both parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business strategies.8. Termination:This Contract may be terminated by either party in case of breach of any term or condition by the other party. The partyseeking termination shall provide a written notice to the other party specifying the reasons for termination.9. Disputes:Any disputes arising out of or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [specify court/tribunal] for resolution.10. Miscellaneous:This Contract is made in duplicate originals, each party holding one original. This Contract shall be governed by and construed in accordance with the laws of [specifycountry/jurisdiction]. Any amendment or modification to this Contract shall be made in writing and signed by both parties. This Contract is effective from the date of signing by both parties.Buyer: _____________________Seller: _____________________Date: _____________________篇5SALES CONTRACT销售合同This Sales Contract is made by and between [买方名称], hereinafter referred to as "Buyer" and [卖方名称], hereinafter referred to as "Seller", whereby both parties agree as follows:一、商品条款Article 1: Commodity1. 商品名称:____________________(请填写商品名称)2. 商品规格:____________________(请填写商品规格)3. 单位价格:____________________(请填写单价)4. 总金额:(小写)____________________ (大写)____________________(人民币)二、价格与货币条款Article 2: Price and Terms of Payment1. 除非另有规定,“CIP价格”应包括卖方将货物交运至指定的目的地的所有成本与费用,包括运输成本及保险费。
国际货物销售合同中英文对照版3篇
![国际货物销售合同中英文对照版3篇](https://img.taocdn.com/s3/m/6f592c794a35eefdc8d376eeaeaad1f3469311b5.png)
国际货物销售合同中英文对照版3篇篇1International Cargo Sales Contract合同编号:____________Contract Number: ____________甲方(买方):____________________Party A (Buyer): ____________________乙方(卖方):____________________Party B (Seller): ____________________鉴于甲方希望购买乙方销售的货物,乙方同意按照本合同规定的条款和条件出售货物,双方本着诚信原则,经友好协商一致,特订立本合同。
WHEREAS Party A desires to purchase the goods offered by Party B, and Party B agrees to sell the goods according to the terms and conditions stipulated in this Contract, both parties,through friendly consultation, agree to conclude this Contract upon the principles of good faith and mutual trust.一、货物描述与规格I. Description and Specifications of Goods1. 货物名称:____________________Name of Goods: ____________________2. 型号/规格:____________________Model/Specification: ____________________3. 数量及单价:____________________ (可添加附表详细列明)Quantity and Unit Price: ________________ (Detailed list may be attached as an appendix)4. 总价值:____________________ (含增值税、关税等)Total Value: ________________ (Including VAT, customs duties, etc.)二、交货与包装II. Delivery and Packaging1. 交货期限:____________________ (具体日期)Delivery Time: ________________ (Specific date)2. 交货地点:____________________ (指定地点)Delivery Place: ________________ (Specified location)3. 包装方式及标准:按照国际标准进行包装并保证货物安全送达指定地点。
国际货物销售合同中英文对照版7篇
![国际货物销售合同中英文对照版7篇](https://img.taocdn.com/s3/m/c2661c4f53d380eb6294dd88d0d233d4b14e3f38.png)
国际货物销售合同中英文对照版7篇篇1International Cargo Sales Contract合同编号:____________Contract Number: ____________甲方(买方):____________________乙方(卖方):____________________Party A (Buyer): ____________________Party B (Seller): ____________________鉴于甲、乙双方就本国际货物销售事项达成一致意见,为明确双方权利和义务,特订立本合同:WHEREAS Party A and Party B have reached an agreement on the matters of international cargo sales, in order to clarify the rights and obligations of both parties, this contract is hereby made and concluded:一、货物描述及规格1. Description and Specifications of Goods货物名称:____________________货物规格:____________________数量及单位:____________________ (详见附件清单)质量标准:符合国际相关标准及双方约定标准。
___The name of the goods: _______________________The specifications of the goods: _______________________Quantity and unit: ____________________ (See the attached list for details)___Quality standard: in accordance with relevant international standards and the agreed standards between both parties.篇2International Cargo Sales Contract甲方(买方):__________________ (以下简称“买方”)Party A (Buyer): ____________________ (hereinafter referred to as “Buyer”)乙方(卖方):____________________ (以下简称“卖方”)Party B (Seller): ____________________ (hereinafter referred to as “Seller”)鉴于甲、乙双方本着互惠互利的原则,经友好协商,就甲方向乙方购买以下商品事宜达成一致意见,特订立本合同。
中英文销售合同5篇
![中英文销售合同5篇](https://img.taocdn.com/s3/m/f0ae7da1760bf78a6529647d27284b73f24236b5.png)
中英文销售合同5篇篇1Sales ContractThis Sales Contract ("Contract") is made on [Insert Date], between [Seller’s Name], with its principal place of business located at [Seller’s Address], and [Buyer’s Name], with its principal place of business located at [Buyer’s Address]. Seller and Bu yer are collectively referred to as the “Parties”.1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products:- [Product 1], quantity: [Quantity], unit price: [Price]- [Product 2], quantity: [Quantity], unit price: [Price]- [Product 3], quantity: [Quantity], unit price: [Price]2. Delivery: The Seller agrees to deliver the products as follows:- Delivery Location: [Delivery Address]- Delivery Date: [Date]- Delivery method: [Method]3. Payment: The Buyer agrees to pay the Seller for the products in the following manner:- Total Price: [Total Amount]- Payment Method: [Method]- Payment Terms: [Terms]4. Inspection and Acceptance: The Buyer shall inspect the products upon delivery and shall have [Number] days to notify the Seller of any defects. Failure to notify the Seller within the specified period shall constitute acceptance of the products.5. Warranty: The Seller warrants that the products will be free from defects in materials and workmanship for a period of [Warranty Period]. If any defects are discovered within the warranty period, the Seller shall repair or replace the products at no additional cost to the Buyer.6. Liability: The Seller shall not be liable for any damages resulting from the use or misuse of the products by the Buyer or any third party.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].8. Entire Agreement: This Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings.IN WITNESS WHEREOF, the Parties have executed this Contract as of the date first above written.Seller: _______________________Buyer: _______________________Date: ________________________[Attach signatures of both parties]This Sales Contract is hereby agreed to by the Parties as of the date first written above.[Seller’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________[Buyer’s Name]By: _____________________ [Authorized Signature]Title: _____________________Date: _________________篇2Sales ContractThis Sales Contract is entered into on [date] by and between [Seller], with its principal place of business located at [address], and [Buyer], with its principal place of business located at [address].1. Goods SoldSeller agrees to sell and Buyer agrees to purchase the following goods:- Description of goods- Quantity- Price2. DeliverySeller shall deliver the goods to Buyer at the following address: [delivery address]. Delivery shall be made on or before [delivery date]. Buyer shall be responsible for any shipping costs associated with the delivery of the goods.3. PaymentBuyer agrees to pay Seller the total purchase price of the goods, which shall be [total amount]. Payment shall be made in the following manner:- [Payment method]- [Payment schedule]4. WarrantiesSeller warrants that the goods sold under this contract are free from defects in materials and workmanship and conform to the specifications provided by the Seller. Seller further warrants that it has good and marketable title to the goods. Any claims for breach of warranty must be made within [timeframe] after delivery of the goods.5. Inspection and AcceptanceBuyer shall have [number] days after delivery of the goods to inspect them. If Buyer finds any defects or nonconformities, Buyer must notify Seller in writing within [timeframe]. Seller shall have the opportunity to inspect the goods and make any necessary repairs or replacements.6. Limitation of LiabilitySeller's liability for any breach of this contract or for any claims arising out of the sale of the goods is limited to the purchase price of the goods. Seller shall not be liable for any consequential, incidental, or punitive damages.7. Governing LawThis contract shall be governed by the laws of[state/country]. Any disputes arising out of this contract shall be resolved through arbitration in [location].8. Entire AgreementThis Sales Contract constitutes the entire agreement between the parties with respect to the sale of the goods and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the parties have executed this Sales Contract as of the date first written above.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇3Sales ContractThis Sales Contract (hereinafter referred to as "Contract") is entered into by and between Party A [Seller], located at [Address], and Party B [Buyer], located at [Address], on [Date].Article 1. Subject of the Contract1.1 Party A agrees to sell and Party B agrees to purchase the following goods:- Quantity: [Number]- Description: [Product Description]- Unit Price: [Price]- Total Price: [Price x Quantity]- Delivery Date: [Date]Article 2. Payment Terms2.1 The total price of the goods shall be paid by Party B to Party A in the following manner:- [Payment Method]- [Payment Schedule]- [Bank Details]Article 3. Delivery Terms3.1 Party A shall deliver the goods to the address specified by Party B on the agreed delivery date.3.2 Party A shall be responsible for the packaging and transportation of the goods to ensure they arrive in good condition.3.3 Party B shall inspect the goods upon delivery and notify Party A of any defects or discrepancies within [Number] days.Article 4. Title and Risk4.1 Title to the goods shall pass to Party B upon full payment of the total price.4.2 The risk of loss or damage to the goods shall pass to Party B upon delivery.Article 5. Warranties5.1 Party A warrants that the goods are free from defects in material and workmanship and conform to the description provided.5.2 Party A shall be responsible for repairing or replacing any defective goods at no additional cost to Party B.Article 6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction].Article 7. Dispute Resolution7.1 Any disputes arising from this Contract shall be resolved through negotiation in good faith.7.2 If a resolution cannot be reached, the dispute shall be resolved through arbitration in accordance with the rules of [Arbitration Institution].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Party A: ________________________[Signature][Name][Title]Date:Party B: ________________________[Signature][Name][Title]Date:This Sales Contract is hereby accepted and agreed to by both Parties.以上是一份典型的中英文销售合同,包括订购商品、付款条款、交货条件、担保、适用法律等内容。
合同样本 售货合同中英版6篇
![合同样本 售货合同中英版6篇](https://img.taocdn.com/s3/m/b760bd4c905f804d2b160b4e767f5acfa0c78356.png)
合同样本售货合同中英版6篇篇1合同样本售货合同Contract for Sale of Goods甲方(买方):___________ 乙方(卖方):___________Party A (Buyer): ___________ Party B (Seller): ___________鉴于甲、乙双方就以下商品的销售和购买达成一致意见,特订立本合同。
WHEREAS Party A and Party B have reached an agreement on the sale and purchase of the following goods, this Contract is hereby made.第一条商品描述和数量Article 1 Description and Quantity of Goods1. 商品名称:_______________________ (请具体描述商品名称)2. 商品规格:_______________________ (请详细描述商品规格)3. 商品数量:_______________________ (商品的总数量)第二条价格和付款方式Article 2 Price and Payment Terms1. 商品价格:____元(请填写具体的商品价格)。
2. 付款方式:_____________ (请填写具体的付款方式,如现金、银行转账等)。
3. 付款期限:_____________ (请填写具体的付款期限)。
第三条交货和验收Article 3 Delivery and Acceptance1. 交货期限:_____________ (请填写具体的交货期限)。
2. 交货方式:_____________ (请填写具体的交货方式,如快递、物流等)。
3. 验收标准:商品应符合甲方的要求,符合国家和行业标准。
如有质量问题,乙方应及时解决。
乙方应承担在验收过程中产生的所有费用。
售货合同中英版5篇
![售货合同中英版5篇](https://img.taocdn.com/s3/m/e8653b7c182e453610661ed9ad51f01dc28157f1.png)
售货合同中英版5篇篇1本合同由以下双方签订:卖方:____________________买方:____________________鉴于买方愿意购买卖方所提供的货物,双方本着平等、自愿、公平的原则,经友好协商,达成如下协议:一、货物描述卖方同意向买方提供以下货物:__________(请详细描述货物的名称、规格、数量、质量、价格等)。
二、交货时间和地点卖方应在双方约定的时间内,将货物交付到买方指定的地点。
如遇特殊情况,卖方应及时通知买方,并共同协商解决方案。
三、价格和支付方式1. 货物总价:____________元人民币(或美元等其他货币)。
2. 支付方式:____________(如现金、银行转账、在线支付等)。
3. 付款时间:买方应在收到货物后的约定时间内完成付款。
四、质量保证卖方应保证所售货物符合质量标准,如有质量问题,买方有权要求退货或换货。
五、违约责任如任何一方违反本合同的任何条款,违约方应承担相应的违约责任。
六、争议解决如双方在履行本合同过程中发生争议,应首先通过友好协商解决;协商不成的,任何一方均有权向有管辖权的人民法院提起诉讼。
七、保密条款双方应对本合同的内容和实施过程保密,未经对方同意,不得向任何第三方泄露。
八、其他条款1. 本合同一式两份,买卖双方各执一份。
2. 本合同自双方签字(或盖章)之日起生效,有效期为____年。
3. 未尽事宜,可另行签订补充协议,补充协议与本合同具有同等法律效力。
(以下无正文)卖方:____________________(签字/盖章)日期:____________________买方:____________________(签字/盖章)日期:____________________英文版本:Sales ContractThis contract is made by and between the following parties:Seller: ____________________Buyer: ____________________WHEREAS the Buyer desires to purchase the goods offered by the Seller, both parties, on the principles of equality, voluntariness and fairness, have agreed to enter into the following agreement through friendly consultation:I. Description of GoodsThe Seller agrees to supply the following goods to the Buyer: __________ (Please describe the name, specifications, quantity, quality, price, etc. of the goods in detail.)II. Time and Place of DeliveryThe Seller shall deliver the goods to the place designated by the Buyer within the time agreed by both parties. In case of any special circumstances, the Seller shall promptly notify the Buyer and both parties shall negotiate a solution.III. Price and Payment1. Total price of goods: ____________ RMB (or other currencies such as USD).2. Payment method: ____________ (such as cash, bank transfer, online payment, etc.).3. Payment time: The Buyer shall complete the payment after receiving the goods within the agreed time.IV. Quality AssuranceThe Seller shall ensure that the sold goods meet the quality standards. If there are any quality problems, the Buyer has the right to request a return or exchange.V. Liability for Breach of ContractIf any party breaches any terms of this contract, the breaching party shall bear corresponding liability for breach of contract.VI. Settlement of DisputesAny disputes arising during the performance of this contract shall be first settled through friendly consultation; if a consensus cannot be reached, any party has the right to initiate a lawsuit in a people's court with jurisdiction.VII. Confidentiality ClauseBoth parties shall keep the content and implementation process of this contract confidential and shall not disclose it to any third party without the other party's consent.VIII. Other Clauses1. This contract is made in duplicate, with each party holding one copy.2. This contract becomes effective from the date of signature (or seal) by both parties and is valid for ____ years.3. Any matters not covered in this contract can be separately signed as a supplementary agreement, which has the same legal effect as this contract.(No text below)Seller: ____________________ (Signature/Seal)Date: ____________________Buyer: ____________________ (Signature/Seal)Date: ____________________篇2本合同由以下双方签订:卖方:____________________买方:____________________鉴于买方希望购买卖方所提供的商品,双方本着平等、自愿、公平、诚实、守信的原则,经友好协商,达成如下协议:一、商品描述1. 商品名称:____________________2. 商品规格:____________________3. 商品数量:____________________4. 商品质量:按照卖方的商品质量标准,具体详见附件中的商品规格说明书。
2024年中英文销售合同范本7篇
![2024年中英文销售合同范本7篇](https://img.taocdn.com/s3/m/b173d6df03d276a20029bd64783e0912a2167ccf.png)
2024年中英文销售合同范本7篇篇1合同编号:XXXXXX甲方(买方):____________________地址:_____________________________联系方式:_________________________乙方(卖方):____________________地址:_____________________________联系方式:_________________________根据《中华人民共和国合同法》及相关法律法规的规定,甲乙双方本着平等、自愿、公平的原则,就甲方向乙方购买商品事宜达成如下协议:一、商品信息商品名称:_________________________规格型号:_________________________数量:_________________________单价:_________________________总价:_________________________质量标准:符合国家标准及双方约定要求。
二、交货条款1. 交货时间:乙方应在合同生效后______日内交货。
2. 交货地点:甲方指定的___________地点。
3. 运输方式及费用承担:由乙方选择运输方式,运费由乙方承担。
4. 验收标准和方法:按照合同约定的质量标准进行验收,如有异议,应当在收到货物后______日内提出。
三、付款条款1. 付款金额:按合同总价的______%支付。
2. 付款方式:甲方可以选择通过银行转账或其他双方同意的方式进行付款。
3. 付款时间:在乙方完成交货并经甲方验收合格后______日内支付完毕。
4. 如因甲方原因导致延迟付款,甲方需按日向乙方支付违约金,最高不超过合同总价的______%。
四、质量保证和售后服务条款乙方保证所提供的商品符合国家质量标准及合同约定的质量要求,如出现质量问题,乙方应在接到通知后______小时内响应并免费维修或更换。
质保期为______年。
销售合同英文范本5篇
![销售合同英文范本5篇](https://img.taocdn.com/s3/m/fd00bd1e68eae009581b6bd97f1922791688be37.png)
销售合同英文范本5篇篇1Sales ContractThis Sales Contract (the "Contract") is entered into on [Date] between [Seller Name], with a registered address at [Seller Address], and [Buyer Name], with a registered address at [Buyer Address] (collectively referred to as the "Parties").1. Sale of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following goods (the "Goods"):- Description of goods:- Quantity:- Price:2. DeliveryThe Seller shall deliver the Goods to the Buyer at the following address: [Delivery Address]. The Goods shall be delivered on or before [Delivery Date].3. PaymentThe Buyer shall pay the Seller the total sum of [Total Amount] for the Goods. The payment shall be made in [Currency] in the following manner:- [Deposit amount] shall be paid upon signing this Contract.- The balance amount shall be paid upon delivery of the Goods.4. Inspection and AcceptanceUpon delivery of the Goods, the Buyer shall inspect the Goods and shall have [Number of Days] days to notify the Seller of any defects or non-conformity. If no notification is made within this period, the Goods shall be deemed accepted by the Buyer.5. WarrantyThe Seller warrants that the Goods shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.SELLER BUYER[Signature] [Signature][Print Name] [Print Name]篇2Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into as of [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's Contact Number]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's Contact Number]The Seller and the Buyer shall collectively be referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and deliver the following goods:Description: [Description of Goods]Quantity: [Quantity of Goods]Unit Price: [Unit Price of Goods]Total Price: [Total Price of Goods]2. DeliveryThe Seller shall deliver the goods to the Buyer at the following address:Delivery Address: [Delivery Address]Delivery Date: [Delivery Date]3. PaymentThe Buyer shall pay the total price of the goods as follows:- [Payment Method(s)]- [Payment Schedule]- [Total Payment Amount]4. Inspection and AcceptanceThe Buyer shall inspect the goods upon delivery. If the goods are found to be damaged or defective, the Buyer shall notify theSeller within [Number of Days] days of delivery. The Seller shall replace or repair the goods at no additional cost to the Buyer.5. Risk of LossThe risk of loss shall pass to the Buyer upon delivery of the goods to the Buyer's address.6. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [State/Country].7. Entire AgreementThis Contract constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties hereto have executed this Contract as of the date first above written.Seller: [Seller's Signature]Buyer: [Buyer's Signature][Date]篇3Sales Contract TemplateThis Sales Contract is entered into on [date], between [Seller's Name], hereinafter referred to as the "Seller", and [Buyer's Name], hereinafter referred to as the "Buyer".1. Description of GoodsThe Seller agrees to sell to the Buyer the following goods:- Description of goods- Quantity- Price per unit2. DeliveryThe Seller agrees to deliver the goods to the Buyer's specified location on [date]. The Buyer agrees to accept the delivery of the goods according to the terms specified in this contract.3. Price and PaymentThe total price of the goods is [total price]. The Buyer agrees to make payment in full to the Seller by [payment method] on or before the delivery date.4. Inspection and AcceptanceThe Buyer has the right to inspect the goods upon delivery. If the goods do not meet the specifications outlined in this contract, the Buyer has the right to reject the goods and request a refund.5. WarrantyThe Seller warrants that the goods are free from defects in materials and workmanship for a period of [warranty period]. If any defects are discovered during this period, the Seller agrees to repair or replace the goods at no additional cost to the Buyer.6. Limitation of LiabilityThe Seller shall not be liable for any damages resulting from the use or misuse of the goods by the Buyer.7. Governing LawThis contract shall be governed by the laws of[State/Country].8. Entire AgreementThis contract constitutes the entire agreement between the Seller and the Buyer and supersedes any prior agreements or understandings between the parties.IN WITNESS WHEREOF, the parties hereto have executed this Sales Contract as of the date first written above.Seller: [Seller's Signature]Buyer: [Buyer's Signature]篇4Sales ContractThis Sales Contract ("Contract") is entered into by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address], collectively referred to as the "Parties."1. Sale of Goods1.1 Seller agrees to sell, transfer, and deliver to Buyer the following goods: [Description of Goods] in the quantities and at the prices as described in Exhibit A attached hereto.1.2 Buyer agrees to accept and pay for the goods according to the terms and conditions set forth in this Contract.2. Price and Payment2.1 The total purchase price of the goods shall be [Amount], payable in [currency], in accordance with the payment terms set forth in Exhibit A.2.2 Payment shall be made by [method of payment], with the first installment due on [Date] and subsequent installments due on a [frequency] basis thereafter.3. Delivery3.1 Seller shall deliver the goods to Buyer's premises at [Address] on or before [Date].3.2 If Seller fails to deliver the goods by the agreed-upon delivery date, Buyer may, at its option, cancel the order and receive a full refund of any amounts paid.4. Risk of Loss4.1 The risk of loss of the goods shall pass to Buyer upon delivery of the goods to Buyer's premises.5. Inspection and Acceptance5.1 Buyer shall inspect the goods upon delivery and shall have [number] days to notify Seller in writing of any defects or nonconformities. Failure to provide notice within this timeframe shall constitute acceptance of the goods.5.2 If the goods are found to be defective or nonconforming, Seller shall have the option to repair or replace the goods at no additional cost to Buyer.6. Warranties6.1 Seller warrants that the goods shall be free from defects in material and workmanship and shall conform to any specifications provided by Buyer.6.2 Seller makes no other warranties, express or implied, including but not limited to warranties of merchantability or fitness for a particular purpose.7. Termination7.1 Either Party may terminate this Contract upon written notice if the other Party fails to perform its obligations under the Contract and such failure continues for a period of [number] days after written notice of the breach.8. Governing Law8.1 This Contract shall be governed by and construed in accordance with the laws of the State of [State].IN WITNESS WHEREOF, the Parties have executed this Sales Contract as of the Effective Date.[Signature of Seller] [Signature of Buyer]__________________________ __________________________[Seller Name] [Buyer Name]Date: ____________________ Date: ____________________篇5Sales ContractThis Sales Contract is entered into on [insert date] by and between [Seller’s Company Name], located at [Seller’s Address], and [Buyer’s Company Name], located at [Buyer’s Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the following goods:– [Description of goods]– Quantity: [Number of units or volume]– Price: [Price per unit or total amount]2. Delivery: The goods will be delivered to Buyer at the address provided by Buyer on or before the agreed-upon delivery date of [insert date]. Delivery will be made by [Seller’spreferred shipping method]. Any additional costs incurred for expedited delivery will be borne by Buyer.3. Payment Terms: Buyer agrees to pay the total amount of [insert total amount] within [number] days of receiving the goods. Payments will be made in [currency] to [Seller’s preferred payment method], unless otherwise agreed upon by both parties.4. Inspection of Goods: Buyer has [number of days] from the date of delivery to inspect the goods. If the goods are found to be defective or not as described, Buyer must notify Seller in writing within this inspection period. Seller will either replace the goods or refund Buyer’s payment.5. Warranty: Seller warrants that the goods are free of defects in material and workmanship and will conform to the specifications agreed upon by both parties. Seller’s liability under this warranty is limited to the replacement or repair of defective goods.6. Governing Law: This Sales Contract shall be governed by the laws of [State/Country] and any disputes arising from the contract shall be resolved in the courts of [State/Country].7. Entire Agreement: This Sales Contract constitutes the entire agreement between Seller and Buyer with respect to the sale of goods and supersedes any previous agreements or understandings, whether written or oral.In witness whereof, the parties hereto have executed this Sales Contract as of the date first above written.Seller: _______________________Buyer: _______________________Signed and sealed in the presence of:Witness: _______________________Date: _______________________This Sales Contract is effective as of the date first above written and shall remain in effect until all obligations under the contract have been fulfilled by both parties.。
中英文货物出口合同(Sales Contract)3篇
![中英文货物出口合同(Sales Contract)3篇](https://img.taocdn.com/s3/m/1bb8b7a9f71fb7360b4c2e3f5727a5e9856a278d.png)
中英文货物出口合同(Sales Contract)3篇篇1本合同由以下双方签订:卖方:__________ (以下简称“甲方”)买方:__________ (以下简称“乙方”)鉴于甲方同意向乙方出售特定货物,乙方同意购买该货物,双方本着平等互利、诚实信用的原则,经友好协商,订立如下条款,以资共同遵守。
一、货物描述1. 货物名称:__________2. 型号/规格:__________3. 数量:__________ (具体数量依据订单而定)4. 质量标准:按__________标准执行,或由双方协商确定。
5. 包装要求:须适应货物特性的需要,妥善包装并保证安全运输。
二、价格条款1. 货物的价格以__________(货币)计价。
具体价格、数量及总价依据双方确认的订单而定。
2. 除非另有规定,所有价格包含包装和运输费用。
若涉及其他附加费用(如关税等),双方需提前协商并明确记载在合同中。
三、交付和验收1. 交货时间:按照乙方订单要求的日期进行交货。
2. 交货地点:甲方的仓库或双方约定的其他地点。
3. 运输方式:由甲方负责安排运输至乙方指定地点。
乙方需在发货前提供具体的收货地址和联系人信息。
4. 验收标准:按照合同规定的质量标准验收货物。
乙方应在收到货物后______天内进行验收并通知甲方验收结果。
四、付款条款1. 付款期限:乙方应在收到货物后的______天内完成付款。
2. 付款方式:通过银行转账或其他双方协商确定的支付方式支付。
3. 逾期付款责任:如乙方逾期付款,甲方有权要求乙方支付逾期付款违约金。
具体金额按照逾期天数和欠款金额计算。
五、保密条款双方应对在本合同执行过程中获知的对方商业秘密和技术秘密予以保密,未经对方书面同意,不得向任何第三方泄露。
泄密方需承担由此给对方造成的一切损失。
六、违约责任This contract is made by and between the Seller: __________ (hereinafter referred to as “Party A”)and the Buyer:__________ (h ereinafter referred to as “Party B”)篇2本合同由以下双方签订:买方(以下简称“甲方”):英文名称:___________地址:___________卖方(以下简称“乙方”):英文名称:___________地址:___________鉴于甲方希望购买,且乙方同意出售下列货物,双方根据平等互利的原则,经友好协商,达成如下协议:第一条合同货物1. 货物名称:___________ (具体商品名称)2. 型号/规格:___________3. 数量:___________ (具体数量)4. 质量/规格:应符合国家标准及双方确认的样品标准。
外贸销售中英文合同8篇
![外贸销售中英文合同8篇](https://img.taocdn.com/s3/m/c5e4104ca31614791711cc7931b765ce04087a69.png)
外贸销售中英文合同8篇篇1合同编号:XXX/XXXX/XXXX/XX甲方:(出口商全称)地址:(出口商地址)电话:(出口商联系电话)传真:(出口商传真号码)邮编:(出口商邮政编码)法定代表人:(出口商法人姓名)公司名称:(出口商公司名称)注册国家或地区:(注册国家或地区)营业注册证号码:(营业执照注册号)业务类型:对外贸易货物销售等进出口相关业务(以下简为甲方)以下简称买方篇2合同编号:【编号】甲方(卖方):【公司名称】地址:【公司地址】电话:【公司电话】传真:【公司传真】电子邮箱:【公司邮箱】乙方(买方):【客户名称】地址:【客户地址】电话:【客户电话】传真:【客户传真】电子邮箱:【客户邮箱】鉴于甲方同意向乙方销售以下商品:【商品名称和数量】现甲、乙双方根据《中华人民共和国合同法》等相关法律法规,就有关事宜达成如下协议:一、商品描述1. 商品名称:【商品名称】2. 商品规格:【商品规格】3. 商品数量:【商品数量】4. 商品质量:按照附件中的质量标准和规格要求进行生产和检验,符合国际标准。
5. 商品包装:按照甲方的标准包装,确保商品在运输过程中完好无损。
二、价格条款1. 商品价格:【商品价格】2. 货币种类:本合同所涉及的金额均以【货币种类】计价。
3. 运输费用:运输费用由乙方承担,甲方负责安排运输。
如因运输导致商品损失,由承运方负责赔偿。
4. 支付方式:【支付方式】,支付时间为【支付时间】。
乙方需在支付期限内完成付款,否则视为违约。
5. 退换货条款:如因甲方原因导致商品质量问题,乙方有权要求退换货。
退换货产生的费用由甲方承担。
如因乙方原因导致退换货,退换货产生的费用由乙方承担。
退换货的具体流程和条件详见附件。
三、交货期限和地点1. 交货期限:【交货时间】。
甲方需在约定时间内完成交货。
如因特殊情况无法按时交货,甲方需及时通知乙方并协商解决方案。
2. 交货地点:【交货地点】。
货物到达指定地点后,由乙方自行安排验收。
英文外贸销售合同6篇
![英文外贸销售合同6篇](https://img.taocdn.com/s3/m/953f73ced0f34693daef5ef7ba0d4a7303766c67.png)
英文外贸销售合同6篇篇1Contract for Foreign Trade SalesThis contract is made by and between [买方公司名称] (hereinafter referred to as the Buyer) and [卖方公司名称](hereinafter referred to as the Seller), whereby the Buyer agrees to purchase from the Seller and the Seller agrees to sell the following commodity to the Buyer on the terms and conditions stipulated below:I. Description of Commodity (商品描述)[请根据实际情况详细列明销售的商品名称、型号、规格等描述信息。
此部分内容为范例,可以根据实际需求进行调整。
]II. Quantity (数量)[请根据实际情况详细列明销售商品的数量。
此部分内容为范例,可以根据实际需求进行调整。
]III. Price (价格)The Seller shall sell the commodity to the Buyer at the contract price listed below (或在合同专用条款中注明). The total contract price (including any additional expenses) shall be paid in full by the Buyer to the Seller within XX days from the date of this Contract. [请根据实际情况详细列明价格条款,包括计价货币、计价方式、支付方式和支付期限等。
]IV. Terms of Delivery (交货条款)The Seller shall deliver the commodity to the Buyer in XX days after receipt of the Buyer’s credit and/or sight L/C in strict accordance with the terms of this Contract. [根据实际情况列明交货或提供服务的时间、地点和方式等条款信息。
2024年中英文销售合同范本简短6篇
![2024年中英文销售合同范本简短6篇](https://img.taocdn.com/s3/m/922eeeb85122aaea998fcc22bcd126fff6055d53.png)
2024年中英文销售合同范本简短6篇篇1合同编号:XXXX-XXXX-XXXX甲方(买方):____________________地址:____________________________联系方式:________________________乙方(卖方):____________________地址:____________________________联系方式:________________________鉴于甲、乙双方本着互惠互利、共同发展的原则,经友好协商,就甲方向乙方购买商品事宜达成如下协议:一、商品条款1. 商品名称及规格:______________________ (中文)/______________ (英文)。
2. 商品数量:____________件。
买方如需要变更购买数量,需提前一周通知卖方进行相应调整。
3. 商品单价:人民币______元/件(或美元______元/件)。
价格包含包装费、运输费等所有附加费用。
除非另有约定,否则商品不得拒收。
价格根据市场行情波动时,双方另行协商调整。
4. 总金额:人民币______元整(或美元______元整)。
最终交易金额根据本合同约定的商品数量与单价计算。
二、交易条款1. 交易方式:双方约定以电汇方式支付货款,具体支付信息如下:卖方账户名、账户号、开户行等支付信息由卖方提供并在合同签署后提供给买方确认无误后操作汇款。
买方在付款后应及时通知卖方确认收款情况。
2. 付款方式:买方应在合同签署后______天内支付全额货款至卖方指定账户。
卖方在收到全额货款后按照双方约定的交货期发货。
3. 交货期限:卖方应在收到全额货款后的______天内完成发货。
如遇特殊情况需延迟发货,卖方应及时通知买方并征得买方同意。
4. 交货方式及地点:采用陆运方式(或海运、空运)将商品运至买方指定地点。
运费由卖方承担。
买方在收到货物后______天内对商品进行验收,如有数量短缺或质量问题应及时通知卖方协商解决。
销售合同中英文对照7篇
![销售合同中英文对照7篇](https://img.taocdn.com/s3/m/d942709f4128915f804d2b160b4e767f5acf8087.png)
销售合同中英文对照7篇篇1本合同(以下简称“合同”)由以下双方签订:买方:(以下简称“甲方”)卖方:(以下简称“乙方”)鉴于甲、乙双方同意进行商品交易,为明确双方的权利和义务,达成如下协议:一、商品描述商品名称:____________规格型号:____________数量:____________质量:符合国家标准及双方约定标准。
二、价格条款1. 商品价格:甲方同意购买,乙方同意出售上述商品,价格为________元人民币。
2. 货币单位:本合同中的货币单位均为人民币。
3. 支付方式:甲方应通过银行转账或其他双方同意的方式支付货款。
4. 付款期限:甲方应在收到货物后的____天内完成付款。
三、交货条款1. 交货期限:乙方应在合同签署后的____天内完成交货。
2. 交货地点:双方约定的地点。
3. 运输方式:由乙方选择最经济、安全的运输方式。
4. 风险提示:乙方应确保所交付的商品符合质量标准,否则应承担相应的违约责任。
四、保证与承诺1. 乙方应保证所销售的商品为全新的、未使用过的,并符合质量标准。
2. 乙方承诺在售后服务方面履行应尽的义务,包括但不限于维修、退换货等。
3. 甲方承诺按照约定支付货款,并遵守合同条款。
五、违约责任1. 若甲方未按照约定支付货款,乙方有权要求甲方支付违约金。
2. 若乙方交付的商品存在质量问题,乙方应承担违约责任,并赔偿甲方的损失。
3. 若因不可抗力因素导致合同无法履行,双方均不承担违约责任。
六、法律适用与争议解决1. 本合同的签订、履行、解释及争议解决均适用中华人民共和国法律。
2. 若双方在合同履行过程中发生争议,应首先通过友好协商解决;协商不成的,任何一方均有权向合同签订地的人民法院提起诉讼。
七、其他条款1. 本合同为甲、乙双方的完整协议,对双方具有法律约束力。
2. 本合同一式两份,甲、乙双方各执一份。
本合同自双方签字盖章之日起生效。
3. 未尽事宜,由双方另行协商并签订补充协议,补充协议与本合同具有同等法律效力。
外贸合同范本中英文6篇
![外贸合同范本中英文6篇](https://img.taocdn.com/s3/m/7834bf89185f312b3169a45177232f60ddcce7d6.png)
外贸合同范本中英文6篇篇1合同编号:【合同编号】甲方(买方):【买方名称】乙方(卖方):【卖方名称】鉴于甲、乙双方同意按照本合同的条款进行货物交易,现特此签订本合同。
一、货物描述及规格(中文)货物名称:【货物名称】(中文)型号/规格:【型号/规格】(英文)Goods Description:【Goods Name】(英文)Model/Specification:【Model/Specs】二、数量及单位(中文)数量:【数量】(中文)计量单位:【计量单位】(英文)Quantity:【Quantity】(英文)Unit of Measurement:【Unit】三、价格与支付方式(中文)货物单价:【货物单价】(中文)总金额:【总金额】(英文)Unit Price:【Unit Price】(英文)Total Amount:【Total Amount】支付方式:【支付方式描述,例如:通过不可撤销的信用证,货到付款等】四、交货与包装(中文)交货期限:【交货日期】(中文)交货地点:【交货地点】(英文)Delivery Time:【Delivery Date】(英文)Delivery Place:【Delivery Place】包装要求:【包装描述,例如:按照惯例进行适当包装,保证货物安全等】五、品质保证与检验乙方应保证货物符合合同规定的品质与数量。
甲方有权在货到后进行检验,如发现品质或数量与合同不符,甲方有权要求乙方更换或退货。
六、保密条款双方应对本合同内容及在执行过程中获知的对方商业秘密和技术秘密予以保密,未经对方许可,不得向任何第三方泄露。
七、违约责任如一方违反本合同的任何条款,违约方应承担由此造成的一切损失。
八、不可抗力如因不可抗力因素致使一方不能履行本合同,应及时通知对方,双方可通过友好协商,确定是否修改或解除合同。
九、法律适用与争议解决篇2合同编号:【编号】甲方(买方):【买方名称和地址】乙方(卖方):【卖方名称和地址】根据《中华人民共和国合同法》及相关法律法规的规定,甲乙双方在平等、自愿、公平和诚实信用的基础上,就买方向卖方购买商品事宜,经友好协商,达成如下协议:一、商品名称、规格、数量及价格(中英文对照)Commodity Name, Specifications, Quantity and Price (中英文对照)商品名称商品规格数量价格备注(请根据实际情况填写)二、交货期限与方式(中英文对照)Delivery Time and Mode (中英文对照)乙方应按照甲方要求的交货期限将商品交付给甲方。
销售合同中英文对照6篇
![销售合同中英文对照6篇](https://img.taocdn.com/s3/m/ed67b86978563c1ec5da50e2524de518974bd36e.png)
销售合同中英文对照6篇篇1本合同(以下简称“合同”)由以下双方签订:买方:(以下简称“甲方”)卖方:(以下简称“乙方”)鉴于甲、乙双方同意进行商品交易,为明确双方的权利和义务,达成如下协议:一、商品描述商品名称:____________规格型号:____________数量:____________质量:符合国家标准及双方约定标准。
二、价格及支付方式1. 商品价格:商品总价为______元人民币(或美元_____元)。
如因市场行情变化导致价格波动,双方可另行协商调整价格。
2. 支付方式:甲方应按照以下方式支付货款:(1)预付款:合同签订后,甲方应支付乙方总金额的____%作为预付款。
(2)发货款:乙方发货前,甲方应支付剩余款项。
(3)其他支付方式:双方可另行协商确定其他支付方式。
三、交货与验收1. 交货期限:乙方应在合同签署后的____天内交货。
2. 交货地点:____________________。
3. 验收标准:按照甲、乙双方约定的质量标准进行验收。
4. 验收方式:甲方应在收到货物后____天内进行验收,并书面通知乙方验收结果。
如甲方未在规定时间内验收,则视为验收合格。
四、违约责任1. 若甲方未按照约定时间支付货款,乙方有权解除本合同,并要求甲方支付逾期付款违约金。
2. 若乙方未按照约定时间交货,应按照未交付货物总价值的一定比例向甲方支付违约金。
3. 若因乙方原因导致交付的货物质量不符合约定标准,乙方应承担全部责任,并按照甲方的要求重新交付货物或进行赔偿。
4. 其他违约责任按照《中华人民共和国合同法》的相关规定处理。
五、保密条款甲、乙双方应对在本合同项下获知的对方商业秘密、技术秘密等信息予以保密,未经对方许可,不得向第三方泄露。
六、不可抗力因不可抗力导致甲、乙双方无法履行本合同义务的,双方均不承担违约责任。
不可抗力事件包括自然灾害、战争、政府行为等无法预见、无法避免和无法克服的客观情况。
七、争议解决因本合同引起的任何争议,双方应首先友好协商解决;协商不成的,任何一方均有权向有管辖权的人民法院提起诉讼。
货物销售合同中英文版5篇
![货物销售合同中英文版5篇](https://img.taocdn.com/s3/m/ea50f2a2c9d376eeaeaad1f34693daef5ef71395.png)
货物销售合同中英文版5篇篇1合同编号:__________甲方(买方):____________________地址:____________________________________电话:____________________ 传真:____________________乙方(卖方):____________________地址:____________________________________电话:____________________ 传真:____________________鉴于甲方需要购买货物,乙方同意销售该货物,双方本着平等互利、诚实信用的原则,经友好协商,达成如下协议:一、货物描述及规格甲方购买乙方的货物为____________________,具体规格、数量、质量等详见附件。
乙方应确保所提供的货物符合附件规定的标准和质量要求。
二、价格及支付方式1. 货物总价:人民币__________元(大写:__________元整)。
2. 支付方式:双方约定采用以下第______种方式支付。
(1)全款预付:甲方在合同签订后______日内预付全部货款。
(2)部分预付结合尾款支付:甲方在合同签订后______日内支付预付款______%,货物验收合格后______日内支付尾款______%。
(3)其他支付方式:____________________。
3. 乙方在收到甲方全额货款后办理发货手续。
三、交货与验收1. 交货期限:乙方应在合同签订后______日内将货物交付给甲方。
2. 交货地点:________________________。
3. 验收标准:按照附件规定的标准和质量要求进行验收。
4. 验收时间:甲方应在收到货物后______日内完成验收。
5. 如甲方发现货物存在质量问题,应当在验收期内书面通知乙方,乙方应当在接到通知后立即处理。
四、违约责任1. 若乙方未能在约定的时间内交货,除因不可抗力因素外,乙方应向甲方支付违约金,违约金金额为货物总价的______%。
中英文销售合同7篇
![中英文销售合同7篇](https://img.taocdn.com/s3/m/d8f9965b366baf1ffc4ffe4733687e21af45ffc9.png)
中英文销售合同7篇篇1甲方(卖方):_____________联系方式:_____________地址:_____________公司名称及法律形式:_____________公司营业范围及经营资质:营业执照所载范围的经营资格。
合法授权签署本协议资格及开展协议规定相关活动的权利能力。
若因甲方不具备前述资格和能力而导致本协议无法履行或履行不当所产生的所有责任均由甲方承担。
乙方(买方):_____________联系方式:_____________地址:_____________一、CONTRACTING PARTIES (合同双方)二、Terms and Clauses (合同条款)篇2销售合同(Sales Contract)甲方(卖方):___________ (以下简称“卖方”)乙方(买方):___________ (以下简称“买方”)鉴于买方愿意购买卖方所提供的商品,双方本着平等、自愿、互利的原则,经友好协商,达成如下协议:一、商品描述及规格(一)商品描述商品名称:___________型号/规格:___________品牌:___________质量及标准:按照双方约定标准及国家相关标准执行。
(二)数量及单价商品数量:___________单价(含包装费用):___________ (货币单位)总价:根据商品数量与单价计算得出。
二、交货条款(一)交货期限卖方应在合同签署后的___天内完成交货。
(二)交货地点双方约定的交货地点为___________。
(三)运输方式及费用承担运输方式:___________;费用承担:___________。
三、付款条款(一)付款方式付款方式为___________(如:电汇、信用证等)。
(二)付款时间买方在收到货物并确认质量无误后___天内完成付款。
四、质量保证及售后条款卖方应保证所售商品的质量符合约定,并承担售后服务责任。
详细内容见附加协议。
五、违约责任如双方中的任何一方违反本合同的任何条款,违约方需承担相应的法律责任。
英文版销售合同范本6篇
![英文版销售合同范本6篇](https://img.taocdn.com/s3/m/614ab5a4aff8941ea76e58fafab069dc502247f8.png)
英文版销售合同范本6篇篇1Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer's Name] (hereinafter referred to as "Buyer").Article 1: Description of GoodsThe Seller shall sell and the Buyer shall purchase the following goods: [Description of the goods including item number, name, specifications, quantity, and unit price].Article 2: Origin of GoodsThe origin of the goods shall be [Origin of Goods].Article 3: Price and PaymentThe total price of the goods shall be [Total Price]. The payment shall be made in [Currency] through [Payment Method] within [Payment Period].Article 4: Terms of DeliveryThe delivery of the goods shall be made by [Delivery Method] at the port of [Port of Delivery]. The risk of loss or damage shall pass to the Buyer upon delivery.Article 5: Quality and InspectionThe Seller shall ensure that the goods are in conformity with the contract specifications. The Buyer shall have the right to inspect the goods before and after delivery. If any defects are found, the Seller shall promptly rectify or replace the goods.Article 6: Packing and MarkingThe goods shall be properly packed and marked in accordance with the usual practices for transportation. The Seller shall bear all costs related to packing and marking.Article 7: Delay and Force MajeureArticle 8: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of [Warranty Period] for the goods. During this period, any defects in material or workmanship shall be rectified by the Seller without additional charge to the Buyer. The Seller shall also provide after-sales service as agreed upon by both parties.Article 9: DisputesAny disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [Dispute Resolution Mechanism] for arbitration or legal proceedings.Article 10: General ProvisionsIn witness whereof, the Seller and the Buyer have signed this contract at [Place] on [Date].Seller: _________________________ (Company Name & Signature)Buyer: _________________________ (Buyer's Name & Signature)Date: _________________________Place: _________________________(Note: This is a template Sales Contract and should be used as a reference only. It is recommended to consult with legal professionals for advice on specific terms and conditions.)篇2SALES CONTRACT1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the goods specified in Annex A (Product Description and Quantity) to this Contract.2. Price and Payment2.1 The Price of the goods shall be as stated in Annex A. The Price shall be paid in the currency specified in Annex B (Payment Terms).2.2 Payment terms are specified in Annex B and shall be strictly adhered to by both parties.3. Delivery and Quality Assurance3.1 Delivery of the goods shall be made according to the terms specified in Annex C (Delivery Terms).3.2 The Seller guarantees that the goods shall be of the quality as described in Annex D (Quality Assurance) and shall comply with all applicable laws and regulations in the country of destination.4. Terms of Delivery and Risk Transfer4.1 The risk of loss or damage to the goods shall pass to the Buyer upon delivery as specified in Annex C.5. Warranty and After-Sales Service5.1 The Seller shall provide a warranty for the goods as specified in Annex E (Warranty and After-Sales Service).6. Confidentiality6.1 Both parties shall maintain confidentiality of all information related to this Contract, except for information that is already in the public domain or obtained through lawful means.7. Force Majeure7.1 Neither party shall be liable for failure to perform due to force majeure events, such as natural disasters, war, riots, or other events beyond their reasonable control.8. Termination8.1 This Contract may be terminated by either party in the event of a breach by the other party that is not cured within a reasonable period of time.9. Dispute Resolution9.1 Any dispute arising out of or in connection with this Contract shall be resolved through negotiation between the parties. If no settlement can be reached, the dispute shall befinally settled by arbitration in accordance with the rules of [Arbitration Institution].10. General Provisions10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made except in writing and signed by both parties.10.2 This Contract is written in both English and [other language(s)], with the English version prevailing in case of any discrepancies.10.3 The laws of [Country] shall apply to this Contract.In Witness Whereof, the parties have executed this Contract in duplicate originals, each party retaining one original for their records.Seller: ____________________ (Authorized Representative)Date: ________Buyer: ____________________ (Authorized Representative)Date: ________篇3SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and concluded on __ DATE __ between Seller: __NAME OF SELLER__ (hereinafter referred to as "Seller") and Buyer:__NAME OF BUYER__ (hereinafter referred to as "Buyer").1. Scope of Supply1.1 The Seller agrees to sell and the Buyer agrees to purchase the following products (hereinafter referred to as "Products"): __PRODUCT DESCRIPTION AND SPECIFICATIONS__.2. Terms of Payment2.1 The total contract value is __CONTRACT VALUE__. The Buyer shall make payment through __PAYMENT METHOD__.2.2 The payment terms are as follows:* A deposit of __PERCENTAGE OF DEPOSIT__ is to be paid within __TIME FRAME__ after signing this Contract.* The balance of the payment shall be made upon the delivery of Products and acceptance by the Buyer.3. Delivery and Shipping3.1 The Products shall be delivered to the Buyer at__SHIPPING ADDRESS__.3.2 The delivery date is __DELIVERY DATE__. The Seller shall inform the Buyer promptly if there is any delay in delivery.4. Quality Assurance4.1 The Seller guarantees that the Products shall be in conformity with the following specifications and quality standards: __PRODUCT SPECIFICATIONS AND QUALITY STANDARDS__.4.2 If the Products fail to meet the specified quality standards, the Buyer shall have the right to reject the Products or claim compensation.5. Warranty and After-Sales Service5.1 The Seller provides a warranty period of __WARRANTY PERIOD__ for the Products. During this period, any defects in material or workmanship shall be rectified by the Seller free of charge.5.2 The Seller shall provide after-sales service in accordance with the terms and conditions agreed upon by both parties.6. Risks and Liabilities6.1 Risk of loss or damage to the Products passes to the Buyer upon delivery. However, if the Products are lost or damaged during transportation, the Seller shall be responsible for making good the loss or damage.6.2 Neither party shall be liable for any failure to perform its obligations due to force majeure events, such as natural disasters, wars, riots, etc.7. Confidentiality7.1 Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure.8. Settlement of Disputes8.1 Any disputes arising from or in connection with this Contract shall be settled through friendly consultation between both parties. If no settlement can be reached, the dispute may be submitted to arbitration at __ARBITRATION PLACE__ in accordance with __ARBITRATION RULES__.9. Force of Law and Jurisdiction9.1 This Contract shall be governed by and construed in accordance with the laws of __COUNTRIES/JURISDICTIONS__.10. Miscellaneous10.1 This Contract constitutes the entire agreement between the parties and no modifications shall be made unless agreed in writing by both parties.10.2 This Contract is made in __NUMBER OF COPIES__ copies, each copy having equal legal effect.10.3 If any provision of this Contract is invalid or unenforceable, it shall not affect the validity and enforceability of the remaining provisions.The parties have read and understood all the terms and conditions stated above and have signed this Contract in witness thereof:Seller:Name: __NAME OF SELLER__Signature: ________________________Date: __DATE__Buyer:Name: __NAME OF BUYER__Signature: ________________________Date: __DATE__篇4SALES CONTRACTThis Sales Contract is made on [合同生效日期] by and between [卖方全称及注册地址], a legal entity duly organized under the laws of [卖方所在国家名称], hereinafter referred to as "Seller" and [买方全称及注册地址], a legal entity duly organized under the laws of [买方所在国家名称], hereinafter referred to as "Buyer".1. Scope of SupplyThe Seller agrees to sell and the Buyer agrees to purchase the following commodity: [商品名称及规格] in accordance with the terms and conditions stipulated below.2. Price and Payment2.1 The Price of the commodity shall be fixed at [商品定价].2.2 Payment shall be made by [支付方式,例如:T/T电汇,L/C信用证等]. Details are as follows: [支付细节及时间表].3. DeliveryThe Seller shall deliver the goods to the port of [交货港口] no later than [最晚交货日期].4. Quality and Inspection4.2 The Buyer shall have the right to conductinspection/supervision of the goods during production process at Seller's factory at any time after receiving a written request from Seller. Details of such inspection shall be agreed mutually by both parties.5. Risk and Transfer of OwnershipThe risk of loss or damage to the goods shall be borne by the Seller until delivery of the goods to the port of destination specified in Article 3 above, at which point ownership shall pass to the Buyer.6. Packing and Shipping Marks7. Insurance8. Warranty and Claims篇5SALES CONTRACTThis Sales Contract (hereinafter referred to as the "Contract") is made and executed on [Date] by and between [Seller's Name] (hereinafter referred to as the "Seller"), and [Buyer's Name] (hereinafter referred to as the "Buyer").Article 1: Identification of the PartiesThe Seller and Buyer shall be identified as per the signatures at the end of this Contract.Article 2: Product DescriptionThe Product to be sold is [describe the product clearly]. Additionally, any relevant specifications, dimensions, or other necessary information must be stated clearly in this section.Article 3: Quantity and Unit PriceThe Seller agrees to sell and the Buyer agrees to purchase [quantity] of the Product, with a unit price of [unit price].Article 4: Terms of Payment4.1 Payment shall be made within [specify the time period,e.g., 30 days] after the date of receipt of invoice.4.2 The mode of payment shall be [specify the mode, e.g., T/T (Telegraphic Transfer) or L/C (Letter of Credit)].4.3 In case of L/C, the Buyer shall open an irrevocable L/C in favor of the Seller.Article 5: Delivery5.1 The Product shall be delivered at [delivery location].5.2 The delivery shall be made within [specify the time period].5.3 Any delay in delivery shall be notified to the Buyer in advance.Article 6: Quality AssuranceThe Seller guarantees that the Product shall be in accordance with the specifications mentioned in Article 2 and shall be free from any defects in material and workmanship.Article 7: WarrantyThe Seller provides a warranty for the Product as follows: [describe the warranty terms].Article 8: Force MajeureIn case of force majeure events, both parties shall be relieved from their obligations under this Contract to the extent of such events.Article 9: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 10: LiabilitiesIn case of any breach of Contract by either party, the other party shall have the right to claim damages.Article 11: DisputesAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [specify the court or arbitration institution] for resolution.Article 12: Miscellanea篇6Sales ContractThis Sales Contract is made on [Date] by and between [Company Name] (hereinafter referred to as "Seller"), and [Buyer Name] (hereinafter referred to as "Buyer").1. Product Description and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following products: [List of products, including name, specifications, quantity, and agreed-upon unit price].2. Terms of PaymentPayment shall be made in advance by [Method of Payment] (e.g., wire transfer, credit card, etc.) within [Time Limit] from the date of the Contract. A copy of the bank receipt as evidence of payment shall be promptly sent to the Seller after payment.3. Delivery and ShippingThe Seller shall deliver the products to the Buyer at the agreed quantity and quality within [Delivery Timeframe]. Shipping shall be arranged by the Buyer at the Buyer's cost. Any delay in delivery due to reasons beyond the Seller's control shall be promptly notified to the Buyer.4. Quality AssuranceThe Seller guarantees that the products shall be in accordance with the agreed specifications and free from any defects in material and workmanship. Should any defects be found, the Seller shall promptly replace or repair such products at no additional cost to the Buyer.5. Warranty and Liabilities6. Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, riots, earthquakes, floods, fires, etc. Should such events occur, the affected party shall promptly notify the other party of the situation and its impact on performance.7. ConfidentialityBoth parties shall maintain confidentiality of any information related to this Contract that is not intended for public disclosure. Such information includes business secrets, technical data, pricing, and other confidential matters agreed upon by both parties.8. TerminationThis Contract may be terminated by either party in case of default by the other party that cannot be rectified within areasonable period of time. Any termination must be notified to the other party in writing and shall be effective upon receipt of such notification.9. Law and Jurisdiction10. Miscellaneous。
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
第一部分特别条款Part I SPECIFIC CONDITIONS该特别条款不限制当事人双方作出另外的约定。
These Specific Conditions does not prevent the parties from agreeing other terms or further details in box I-16 or in one or more annexes.卖方:买方:SELLER:________________ BUYER:______________________地址(Address): ___________ 地址(Address):___________________(Tel): _____________ (Tel):___________________传真(Fax): _____________ 传真(Fax):___________________电邮(E-mail):____________ 电邮(E-mail):___________________联系人:联系人:CONTACT PERSON: _________ CONTACT PERSON:_______________地址(Address): ___________ 地址(Address):___________________(Tel): _____________ (Tel): ___________________传真(Fax):_____________ 传真(Fax):___________________电邮(E-mail): ____________ 电邮(E-mail):___________________本销售合同由第一部分的特别条款(相应的栏目中应填写了容)和第二部分的一般条款组成,并受该两部分的约束。
The present contract of sale will be governed by these Specific Conditions (to the extent that the relevant boxes have been completed) and by the General Conditions of Sale which constitute part II of this document.I-1 销售的货物I-1 Goods sold__________________________货物的品名及规格description of the goods若空白处不够填写,可使用附件。
an annex may be used If there is insufficient space.I-2 合同价款(第4条)I-2 CONTRACT PRICE (ART. 4)货币:Currency:用数字表述的金额:用文字表述的金额:amount in numbers:__________________________ amount inletters:_______________I-3 交货贸易术语I-3 DELIVERY TERMS推荐的贸易术语(依照《2000年国际贸易术语解释通则》)Recommended terms (according to Incoterms 2000):______ EXW 工厂交货(Ex Works)指定地点(named place):____________ FCA 货交承运人(Free Carrier)指定地点(named place):____________ CPT 运费付至(Carriage Paid To )指定目的地(named place of destination):___________ CIP 运费、保险费付至指定目的地:_________________________(Carriage and Insurance Paid To)named place of destination:____________ DAF 边境交货(Delivered At Frontier)指定地点( named place):__________ DDU 未完税交货指定目的地:_______________________(Delivered Duty Unpaid) named place of destination: __________ DDP 完税后交货指定目的地: _______________________(Delivered Duty Paid) named place of destination:____其它贸易术语(依照《2000年国际贸易术语解释通则》)Other terms (according to Incoterms 2000)______ FAS 船边交货指定装运港:_______________________(Free Alongside Ship) named port of shipment: __________ FOB 船上交货指定装运港:_______________________(Free On Board) named port of shipment: __________ CFR 成本加运费指定目的港:_______________________(Cost and Freight) named port of destination:__________ CIF 成本、运费加保险费指定目的港:_______________________(Cost Insurance and Freight )named port of destination:__________ DES 目的港船上交货指定目的港:_______________________(Delivered Ex Ship) named port ofdestination:__________ DEQ 目的港码头交货指定目的港:_______________________(Delivered Ex Quay) named port ofdestination:____其它交货贸易术语:Other delivery terms:承运人(当需要时)CARRIER (where applicable)地址(Address):___________(Tel):_____________传真(Fax):_____________电邮(E-mail): _____________联系人:CONTACT PERSON: _________地址(Address):___________(Tel):_____________传真(Fax):_____________电邮(E-mail): _____________I-4 交货时间I-4 TIME OF DELIVERY(在此处注明卖方依照相应的贸易术语中第A4款的规定必须履行交付货物义务的日期或期限)Indicate here the date or period (e.g. week or month) at which or within which the Seller must perform his delivery obligations according to clause A.4 of the respective Incoterm.__________________________I-5 买方对货物的检验(第3条)I-5 INSPECTION OF THE GOODS BY BUYER (ART. 3)装运之前(Before shipment)____天(date)检验地(place of inspection): __________________ 其它(Other): ________________I-6 货物所有权的保留(第7条)I-6 retention of title (ART. 7)____ 是(YES)____ 否(NO)I-7 付款条件(第5条)I-7 PAYMENT CONDITIONS (ART. 5)往来帐户付款(第5.1条)___ Payment on open account (art. 5.1)付款时间(如与第5.1条的规定不同)〔Time for payment (if different from art. 5.1) :开出发票之日起____ 天。
其它:_____________days from date of invoice. Other: _______开立需要即期担保或备用信用证保证的帐户(第5.5条)__ Open account backed by demand guarantee or standby letter of credit (art. 5.5)预先付款(第5.2条)___ Payment in advance (art. 5.2)日期(如与第5.2条规定不同):_________ 总价款_____ 合同价款的___%Date (if different from art. 5.2): ____________ Totalprice ______% of the price跟单托收(第5.5条)___ Documentary Collection (art. 5.5)___付款交单(D/P Documents against payment )_________ 承兑交单(D/A Documents against acceptance)_______不可撤销的跟单信用证(第5.3条)___ Irrevocable documentary credit (art. 5.3)___保兑(Confirmed) ___ 非保兑(Unconfirmed)发出地(如适用时)〔Place of issue (if applicable)〕:_________保兑地(如适用时)〔Place of confirmation (if applicable)〕:_________款项的取得(Credit available):__ 即期付款(By payment at sight)__ 延期付款(By deferred payment at): ___ 天(days)__ 承兑汇票(By acceptance of drafts at): ___ 天(days)__ 议付(By negotiation)部分装运(Partial shipments): __ 允许(Allowed) __不允许(Not allowed)转运(Transhipment): __ 允许(Allowed) __ 不允许(Not allowed)必须向卖方通知跟单信用证的日期(如果与第5.3条不同):交货日前______天其它:_______________Date on which the documentary credit must be notified to seller (if different from art. 5.3)________ days before date of delivery __ other:_________________ 其它(Other): _______________。