ASME焊接工艺评定-焊工技能评定表格

QW-482 SUGGESTED FORMAT FOR WELDING PROCEDURE SPECIFICATIONS (WPS)

（See QW-200.1, Section IX, ASME Boiler and Pressure Vessel Code）

Sheet 1 of 2 Company Name By

Welding Procedure Specification NO. Date

Supporting PQR NO.(s) Revision No.

Welding Process(es) Types

QW-482 (Back)

WPS No. Rev.

QW-483 SUGGESTED FORMAT FOR PROCEDURE QUALIFICATION RECORDS (PQR)

(See QW-200.2, Section IX, ASME Boiler and Pressure Vessel Code)

Record Actual Conditions Used to Weld Test Coupon

Company Name

Procedure Qualification Record No. Date

WPS No.

Welding Process(es)

JOINTS (QW-402)

Groove Design of Test Coupon

(For combination qualifications, the deposited weld metal thickness shall be recorded for each filler metal or process used.) BASE METALS (QW-403) Material Spec. Type or Grade

P-No. to P-No. Thickness of Test Coupon Diameter of Test Coupon N/A Other

POSTWELD HEAT TREATMENT (QW-407) Temperature Time ： Other

GAS (QW-408)

Gas(es) (Mixture) Flow Rate

Shielding Trailing Backing

FILLER METALS (WQ-404) 1 2 SFA Specification AWS Classification Filler Metal F-No Weld Metal Analysis A-No. Size of Filler Metal Filler Metal Product Form ELECTRICAL CHARACTERISTICS (QW-409) Current Polarity Amps. V olts Tungsten Electrode Size Other

Supplemental Filler Metal Electrode Flux Classification Flux Type

Flux Type Name Weld Metal Thickness Othe

POSITION (QW-405) Position of Groove

Weld Progression (Uphill, Downhill) N/A Other

TECHNIQUE (QW-410)

Travel Speed : String or Weave Bead:

Oscillation: N/A Multipass or Single Pass (Per Side) Single or Multiple: Other :

PREHEAT (QW-406)

Preheat Temperature No p reheat, Ambient Temperature ≥15℃ Interpass Temperature 256℃ Other

QW-483 (Back)

PQR No. Tensile Test (QW -150)

Specimen No. Width Thickness Area Ultimate Total

Load

Ultimate Unit

Stress , MPa

Type of Failure

and Location

1

2

- - - - - - - - - - - - - -

Type and Figure No. Result

Toughness Tests (QW-170)

Specimen

No.

Notch

Location

Specimen

Size

Test

Temperature

Impact Values Drop Weight Break

(Y/N)

Ft-lb % Shear Mils

1

2

3

4

5

6

Comments: Acceptable

Fillet-Weld Test (QW-180)

Resul – Satisfactory: Yes N/A No Penetration into Parent Metal: Yes No Macro—Results

Other Tests

Type of Test N/A

Deposit Analysis

Other

-----------------------------------------------------------------------------------------------------------------------------------------------------

Welder’s Name Clock No. Stamp No.

Tests Conducted by Laboratory Test No.

We certify that the statements in this record are correct and that the test welds were prepared, welded, and tested in accordance with the requirements of Section IX of the ASME BOILER AND PRESSURE VESSEL CODE.

Preparation: atify:

Manufacturer:

Date Issued: