LED灯产品规格书 -
LED灯产品规格说明书
Address: 3F Building 3, Landwind Industrial Zone, Shiyan Town,ModelPictureDiscriptionSize (LxW)mmLED Q'ty (pcs)Power (W)Voltage&FrequencyColor&KelvinLuminousFlux(lm)Unit price (100-1000pcs)(USD) Unit price>1000pcs)(USD)XH-LPR120-5WAl frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter120mm Cut diameter 105mm 25PCSSMD2835 LEDs5WAC85-265V 50-60Hz warm white/white 2800-7000K400-450 4.44 4.23XH-LPR145-8W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter145mm Cut diameter 130mm 40PCSSMD2835 LEDs8WAC85-265V 50-60Hz warm white/white 2800-7000K650-700 6.89 6.56XH-LPR160-9W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter160mm Cut diameter 145mm 45PCSSMD2835 LEDs9WAC85-265V 50-60Hz warm white/white 2800-7000K750-8007.447.09XH-LPR180-12W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter180mm Cut diameter 160mm 60PCSSMD2835 LEDs12WAC85-265V 50-60Hz warm white/white2800-7000K950-10008.117.72XH-LPR200-14W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter200mm Cut diameter 180mm 70PCSSMD2835 LEDs14WAC85-265V 50-60Hz warm white/white2800-7000K1100-11509.118.68XH-LPR220-16W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter220mm Cut diameter 200mm 80PCSSMD2835 LEDs16WAC85-265V 50-60Hz warm white/white2800-7000K1250-130010.449.95XH-LPR225-18W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter250mm Cut diameter 205mm 90PCSSMD2835 LEDs18WAC85-265V 50-60Hz warm white/white2800-7000K1450-140010.6710.16XH-LPR240-20W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter240mm Cut diameter 220mm 100PCSSMD2835 LEDs20WAC85-265V 50-60Hz warm white/white2800-7000K1650-170012.3311.75XH-LPR300-24W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter300mm Cut diameter 280mm120PCSSMD2835 LEDs24WAC85-265V 50-60Hz warm white/white2800-7000K1950-200015.6714.92ModelPictureDiscriptionSize(LxW)mmLED Q'ty (pcs)Power (W)Voltage&FrequencyColor&KelvinLuminousFlux(lm)Unit price (100-1000pcs)(USD) Unit price>1000pcs)(USD)XH-LPS110-5WAl frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter110x110mm Cut diameter 90x90mm 20PCSSMD2835 LEDs5WAC85-265V 50-60Hz warm white/white 2800-7000K400-450 4.67 4.44XH-LPS160-12W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter160x160mm Cut diameter 140x140mm 60PCSSMD2835 LEDs12WAC85-265V 50-60Hz warm white/white2800-7000K950-10008.337.94XH-LPS180-12W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter180x180mm Cut diameter 160x160mm 60PCSSMD2835 LEDs12WAC85-265V 50-60Hz warm white/white2800-7000K950-10008.568.15XH-LPS200-14W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter200x200mm Cut diameter 180x180mm 72PCSSMD2835 LEDs14WAC85-265V 50-60Hz warm white/white2800-7000K1100-11509.679.21XH-LPS220-16W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter220x220mm Cut diameter 200x200mm 80PCSSMD2835 LEDs16WAC85-265V 50-60Hz warm white/white2800-7000K1250-130010.8910.37XH-LPS240-16W Al frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter240x240mm Cut diameter 180x180mm80PCSSMD2835 LEDs16WAC85-265V 50-60Hz warm white/white2800-7000K1250-130012.3311.75Square Ultra thin LED Downlight seriesRound Ultra thin LED Downlight seriesXINGHUO LED TECH LIMITEDTel : 0086-0755-********-805 Fax: 0086-0755-********Web:Email:**************MSN:**************************:johnzuo88Bao'an District, Shenzhen, China 518108Ultra thin LED Downlight catalogue with pricelistXH-LPS300-20WAl frame+arylic coverTaiwan Original Chi Mei light panelguide,transparent rate 90%Diameter300x300mmCut diameter280x280mm100PCSSMD2835 LEDs20WAC85-265V50-60Hzwarm white/white2800-7000K1650-170015.6714.92Note: 1.LED light source:LumenMax SMD2835 LEDs, 20-22lm/pc LEDs CRI>802.Warranty: 3years3. Price Term: EXW Shenzhen5.Lead time: 3-5 working days for samples, 12-15days for large quantity6.Validity: 30days, the final price should be confirmed with Xinghuo LED7.The MOQ is 100pcs ( No requirements for new customers)Company Name:Account No.:Bank Code: SWIFT Code: Bank address: 004HSBCHKHHHKHHSBC, No. 1 Queen’s Road Central, Central, Hong Kong4. Certification: CE, ROHS, Erp approvedBy T/T payment in advance, kindly write the company name correctly.XINGHUO LED TECH LIMITED561-718396-838。
2025led灯珠 规格书
2025led灯珠规格书摘要：一、LED 灯珠简介1.LED 灯珠的发展历程2.LED 灯珠的分类及应用领域3.LED 灯珠的优势二、2025LED 灯珠的技术参数1.产品规格2.发光性能3.工作电压与电流4.光通量与光效5.色温与显色指数6.寿命与可靠性三、2025LED 灯珠的性能特点1.高亮度2.低能耗3.高光效4.出色的显色性5.长寿命6.环保无污染四、2025LED 灯珠的应用领域1.室内照明2.商业照明3.工业照明4.户外照明5.汽车照明6.显示屏与装饰照明五、2025LED 灯珠的发展趋势与展望1.技术的不断进步2.国家政策的支持3.市场需求的扩大4.行业竞争格局5.绿色照明的推广正文：随着科技的快速发展，LED 灯珠已经成为照明行业的主流产品。
2025LED 灯珠作为新一代的LED 产品，凭借其出色的性能和广泛的应用领域，受到了业界的广泛关注。
首先，我们来了解一下LED 灯珠的发展历程。
LED 灯珠起源于20 世纪60 年代，经过几十年的发展，已经成为照明行业的一种重要光源。
从刚开始的指示灯到现在的照明光源，LED 灯珠的发展经历了几个阶段，包括蓝光LED、绿光LED、白光LED 等。
接下来，我们详细了解一下2025LED 灯珠的技术参数。
首先，产品规格方面，2025LED 灯珠具有较高的尺寸和体积，可以提供更大的发光面积。
其次，发光性能方面，2025LED 灯珠的亮度、色温、显色指数等指标均达到了较高的水平。
工作电压与电流方面，2025LED 灯珠的工作电压较低，电流较大，可以降低能耗，提高光效。
光通量与光效方面，2025LED 灯珠的光通量较高，光效也达到了很高的水平。
色温与显色指数方面，2025LED 灯珠具有多种色温可选，显色指数也达到了Ra>80 的优异水平。
寿命与可靠性方面，2025LED 灯珠的寿命达到了数万小时，可靠性得到了极大的提高。
2025LED 灯珠具有许多性能特点，如高亮度、低能耗、高光效、出色的显色性、长寿命和环保无污染等。
led筒灯产品规格说明书
产品名称：高亮度LED筒灯|3W LED筒灯|3瓦LED筒灯型号：HW-TD03C03输入电压：AC85-265V,50/60Hz功率总合：3±1W总光通量：NW:120±10Lm,WW: 110±10Lm发光颜色：暖白、自然白、正白显色指数：Ra>70工艺材质：铝合金+PC开孔尺寸：Φ73mm光源类型：LED大功率灯珠,1W/颗工作环境：-15—45℃贮存环境：-30—60℃/ （20—85）%RHLED筒灯PN结构图：LED筒灯材质及特点：1、线形的外观设计，合理的光学设计，有效的提高了产品照度和亮度。
2、采用优质的铝合金散热，最大限度的增加了散热面积，完全取代了传统照明的白炽灯。
3、采用高效的恒流驱动电路，散热优异，适用传统的市电电压，性能稳定可靠。
4、产品尺寸和安装方式与传统灯一致，可直接安装在与传统配套的孔上。
5、超低功耗，比传统卤素灯、白炽灯节能80%以上，寿命长达2万小时以上。
采用优质低光衰、低功耗、高效率大功率LED光源，省电而且环保。
6、显色性好，显色指数高，对颜色的呈现真实、鲜艳，利用率更高。
筒灯独特：高效的恒流驱动电路，AC85V~265V宽适电压，亮度恒定，光衰最小采用优质低光衰、低功耗、高效率大功率LED光源采用优质的铝合金散热，最大限度的增加了散热面积使用范围：范围：家庭，商场，宾馆，餐厅，商店橱窗，展示厅，阅览室等室内照明。
对象：取代40W白炽灯，13W节能灯安装LED筒灯须知：1、请先仔细阅读产品规格书2、安装或更换本产品时切记先关掉电源3、请确认包装标签是否与实际产品相符；4、将产品接通电源前，请先确认电源是否适用本产品，否则可能造成产品不亮或永久性损坏。
厦门华炜电子工贸有限公司主要产品:LED日光灯、LED天花射灯、LED筒灯、LED球泡灯、LED平板灯、LED格栅灯、LED护栏管、LED灯条、LED投光灯、LED显示屏、节能日光灯T8、T5系列支架、格栅灯、净化灯、七彩控制器、LED发光模组、LED电子看板、电子镇流器等。
瑞丰LED光线灯具规格书说明书
and reliability.如产品需要用在有特殊质量要求及可靠性要求的地方，请提前咨询瑞丰的销售人员以取得相关信息。
disassemble and analyzein written form.在取得瑞丰的同意前，客户不应该对产品进行拆解分析，如发现失效产品，请直接书面通知瑞丰。
Features 特征Extremelywide viewing angle.发光角度大Suitable for all SMT assembly and solder process.适用于所有的SMT 组装和焊接工艺 Moisture sensitivity level:Level 3.防潮等级Level 3 Package:4000pcs/reel.包装每卷4000pcs RoHS compliant.满足RoHS 要求Description 描述The Colour LED which was fabricated by using a green chip 该产品为绿光LED ，是由绿光芯片封装形成Applications 应用Optical indicator.光学指示Switch and Symbol,Display.开关和标识、显示器等 General use.其他应用RF-GNS150TS-CFPackage Dimension外观尺寸NOTES:1.All dimensions units are millimeters.(所有尺寸标注单位为毫米)2.All dimensions tolerances are 0.2mm unless otherwise noted.(除特别标注外，所有尺寸公差为±0.2毫米)Electrical/Optical Characteristics at Ts=25°C电性与光学特性Note:备注Vr=5V For test conditions.Vr=5v为测试分选条件。
LED灯具规格书
①. 9W LED 瓦楞灯●详细技术参数：光源功率：9W 灯具功率：8~9W 光源品牌：美国流明 光源颗数：3pcs 单颗3W 输入电压： DC24V材 质：压铸铝 防护等级： IP65 光 通 量：>950lm色 温： 6000-6500KLED 发光效率：＞110lm/W 灯具效率： ＞80 %显色指数： Ra ＞75 灯体温度： ≤50℃工作环境温度：-25℃ ～ +75℃ 灯体尺寸：Φ100mm 光源使用寿命：≥50000H 安装方式：螺丝固定●产品特点：1、采用进口芯片，自主封装。
2、独特钢化光学玻璃，透光率达95%以上，光线更为柔和。
3、良好的光还原性及显色性、色彩显示优良，表现力强。
4、高规格压铸铝材，抗腐蚀，抗氧化效果好，能抵御恶劣环境。
产品图片 （仅供参考）②. 6W LED 瓦楞灯●详细技术参数：光源功率：6W 灯具功率：6~7W 光源品牌：美国流明 光源颗数：3pcs 单颗2W 输入电压： DC24V 材 质：压铸铝 防护等级： IP65光 通 量：>650lm 色 温： 6000-6500K LED 发光效率：＞110lm/W灯具效率： ＞80 % 显色指数： Ra ＞75 灯体温度： ≤50℃工作环境温度：-25℃ ～ +75℃ 灯体尺寸：Φ75mm 光源使用寿命：≥50000H 安装方式：螺丝固定●产品特点：1、采用进口芯片，自主封装。
2、独特钢化光学玻璃，透光率达95%以上，光线更为柔和。
3、良好的光还原性及显色性、色彩显示优良，表现力强。
4、高规格压铸铝材，抗腐蚀，抗氧化效果好，能抵御恶劣环境。
产品图片 （仅供参考）③. 3W LED 射灯●详细技术参数：光源功率：3W 灯具功率：3~4W 光源品牌：美国流明 光源颗数：3pcs 单颗1W 输入电压： DC24V材 质：压铸铝 防护等级： IP65光 通 量：>330lm 色 温： 6000-6500K LED 发光效率：＞110lm/W灯具效率： ＞80 % 显色指数： Ra ＞75 灯体温度： ≤50℃工作环境温度：-25℃ ～ +75℃ 灯体尺寸：Φ60mm 光源使用寿命：≥50000H 安装方式：螺丝固定●产品特点：1、采用进口芯片，自主封装。
LED灯具产品技术规格书
1.2米灯管
技术参数
额定功率 电源电压 电源频率 电源电流 显色指数 功率因数 光通量 使用寿命 温度范围 湿度范围 18W AC100-240V 50/60Hz 0.082A 80 0.9 1500LM 30,000小时 -25℃~45℃ 10%~90%
轨道射灯
技术参数
额定功率 电源电压 电源频率 电源电流 显色指数 功率因数 光通量 使用寿命 温度范围 湿度范围 3W AC100-240V 50/60Hz 0.0136A 80 0.7 238LM 30,000小时 -25℃~45℃ 10%~90%
12W天花灯
技术参数
额定功率 电源电压 电源频率 电源电流 显色指数 功率因数 光通量 使用寿命 温度范围 湿度范围 12W AC100-240V 50/60Hz 0.0545A 80 0.9 980LM 30,000小时 -25℃~45℃ 10%~90%
36W面板灯（600mmX600mm）
技术参数
额定功率 电源电压 电源频率 电源电流 显色指数 功率因数 36W AC100-240V 50/60Hz 0.164A 80 0.9
光通量 使用寿命
温度范围
2500LM 30,000小时
-25℃~45℃
湿度范围
10%~90%
12W面板灯(300mmX300mm)
技术参数
额定功率 12W
电源电压
电源频率 电源电流 显色指数 功率因数 光通量 使用寿命 温度范围 湿度范围
5W球泡灯
技术参数
额定功率 电源电压 电源频率 电源电流 显色指数 功率因数 光通量 使用寿命 温度范围 湿度范围 5W AC100-240V 50/60Hz 0.0227A 80 0.7 460LM 30,000小时 -25℃~45℃ 10%~90%
2025led灯珠 规格书
2025led灯珠规格书（原创实用版）目录1.2025LED 灯珠概述2.2025LED 灯珠规格参数3.2025LED 灯珠的特点与优势4.2025LED 灯珠的应用领域5.2025LED 灯珠的环保与节能性正文一、2025LED 灯珠概述2025LED 灯珠，顾名思义，是指尺寸为 2.0mm×2.5mm 的 LED 灯珠。
随着 LED 技术的不断发展，2025LED 灯珠凭借其小巧的尺寸、高性能和低能耗等特点，越来越受到市场的欢迎。
二、2025LED 灯珠规格参数2025LED 灯珠的主要规格参数如下：1.尺寸：2.0mm×2.5mm2.颜色：红、橙、黄、绿、蓝、紫等多种颜色3.亮度：5000mcd～10000mcd4.视角：120°～150°5.工作电压：1.8V～3.0V6.工作电流：20mA～60mA7.焊接方式：手工焊接或机器焊接三、2025LED 灯珠的特点与优势1.小巧轻便：2025LED 灯珠尺寸小巧，重量轻，便于安装和使用。
2.高亮度：采用高亮度 LED 芯片，亮度较高，适合于各种照明场合。
3.节能环保：低能耗，使用寿命长，无污染，符合绿色环保要求。
4.稳定性好：抗振动、抗冲击性能好，适应各种工作环境。
5.色彩丰富：有多种颜色可供选择，满足不同场合的照明需求。
四、2025LED 灯珠的应用领域1.指示灯：用于各种电子设备的电源指示、功能指示等。
2.照明灯：用于小型照明设备，如台灯、手电筒、应急灯等。
3.显示屏：用于制作各种 LED 显示屏，如户外广告屏、室内显示屏等。
4.灯带：用于制作各种灯带产品，如装饰灯带、照明灯带等。
5.其他：用于制作各种工艺品、玩具等，具有广泛的应用前景。
五、2025LED 灯珠的环保与节能性1.环保性：2025LED 灯珠不含汞等有毒物质，废弃物可回收处理，符合环保要求。
2.节能性：2025LED 灯珠的能耗低，比传统照明产品节能 80% 以上，有助于节约能源，降低碳排放。
LED灯饰图片及规格书
LED泛光灯规格书
用
Type 功率 Energy Used 寿命 Lifespan 材质 Material Quality 接口 Holder 输入电压 Input Voltage 功率因数 Power Factor（PF） 光源 Light Source 光通量 Luminous Flux（LM） 发光效率 Luminous Efficacy 显色指数 Ra 发光角度 Beam Angel 产品尺寸 Dimension 重量 Weight 包装尺寸 Packing specification 装箱规格 Carton Size IP等级 IP 使用/存储温度 使用/存储湿度
产品型号
深圳市国惠照明器材有限公司
详细 规格
规格与寿命
L70测 试报告
测试型号 Test Model：GH-FD-001
产品型号
深圳市国惠照明器材有限公司
配光 曲线
光学参数
照射 距离/照 度/号
深圳市国惠照明器材有限公司
如图 【2】所 示现将五 金支架固 定螺母松 开，将支 架取下；
如图 【1】所 示将五金 支架上A 、B、C三 个固定孔 用螺丝固 定于安装 面上；
如图 【3】所 示将电源 L/N/G三 条线正确 接入电缆 后通电；
注意 事项
安装 只允许专 业电工操 作，安装 之前请详 细检查灯 具有无异 常；
安装 步骤按安 装说明进 行，螺丝 要拧紧， 接线方式 争取，详 细安装说 明请按附 带产品说 明书。
深圳市国惠照明器材有限公司
深圳市国惠照明器材有限公司
Shenzhen Guo Hui Lighting Equipment CO.,LTD
GH-FD-001/10W LEDFloodlight Specifications
淘宝LED灯产品说明书
DATA SHEETIntroduction Performance Characteristics Mechanical Dimensions Characteristic Curves ReliabilityPacking Specification PrecautionP 2P 3P 5P 6P 9P 10P 11 CITILED COB SeriesHigh Intensity TypeRa90 Min. ModelCLU7A2-1201C9・Mechanical Dimensions :13.5 × 13.5 × 1.4 (mm)・Package Structure :Aluminum Base Chip on Board ・Reference Assembly :M3 screw, Connector ・CRI (Ra):90 Min.・Nominal CCT:2,700K, 3,000K, 4,000K ・Chromaticity Range:3-step Ellipse,the center refers to ANSI C78.377:2017.・Thermal Resistance : 3.0C/W ・Maximum drive current :300mA・RoHS compliant・Better die arrangement for optics・Wide range of luminous flux and high efficacy・Improved lumen density compared with previous version ・UL recognized component (E358566)1. Introduction1-1. Product Description1-2. FeaturesCLU7A2-1201C9-273H5R2[1][2][3][4][5][1]:[2]:[3]:[4]:[5]:Nominal CCT CRI (Ra)Product NomenclatureCLU7A212012700K 90 Min.Product shape Die count in series Die count in parallel CITIZEN ELECTRONICS was the first COB manufacturer.Our long-term advanced knowledge and packaging technique have enable us to provide products with excellent reliability and high quality.The High Intensity Ver.3 has been developed as a high performance product with high luminous flux through the full use of the CITIZEN ELECTRONICS' packaging techniques.We have added the new LES size of φ3.3mm and φ4.2mm to our product lineup, which makes it possible to realize narrower light distribution than before and as a result contribute to the downsizing of optical parts.The High Intensity Ver.3 offers an opportunity to develop compact and high performance truck light,downlight, lamp and other lighting products due to its high performance.2. Performance Characteristics2-1. Electro Optical Characteristics2-2. Absolute Maximum Ratings( Tj=85C )Ra R9Tc25C*Min.Min.Min.Typ.Typ.Typ.Min.Typ.Max.CLU7A2-1201C9-273H5R22700K 905055062567810017532.735.638.5 3.0CLU7A2-1201C9-303H5R23000K 905058066071610617532.735.638.5 3.0CLU7A2-1201C9-403H5R24000K905063071677711517532.735.638.53.0Notes :1. Citizen Electronics maintains a tolerance of ± 10% on luminous flux measurements.2. Citizen Electronics maintains a tolerance of ± 3% on forward voltage measurements.3. Citizen Electronics maintains a tolerance of ± 1 on Ra measurements. * : Values of Luminous flux at Tc=25C are provided as reference only.Product codeForward Current( mA )Thermal Resistance Rj-c ( C/W )CRI Nominal CCTLuminous flux( lm )Efficacy ( lm/W )Voltage ( V )Tj85CSymbol RatingPi 12.6*1If 300*1Ir 1Top -40 ~ +100Tst -40 ~ +100Tc 105*2Tj140*3*2. Refer to 3. Outline drawing for Tc measurement point.*3. D.C. Current : Tj = Tc + Rj-c × PiParameterInput Power (W)Forward Current (mA)Reverse Current (mA)Storage Temperature (C)Case Temperature (C)Junction Temperature (C)Operating Temperature (C)*1. Input power and forward current are the values when the LED is used within the range of the derating curve in this data sheet.2-3. Chromaticity Characteristics2,700K( 0.4578, 0.4101)3,000K ( 0.4339, 0.4033)4,000K( 0.3818, 0.3797)3-step ellipse* Color region stay within 3-step ellipse from the chromaticity center.* The chromaticity center refers to ANSI C78.377:2017.* θ is the angle between the major axis of the ellipse and the x-axis, and a and b are the major and minor semi-axes of an ellipse.( Rated current, Tj=85C )57.280.008340.0040853.170.007740.00411Color RegionNominal CCT Center Point ( x, y )Oval parameterMajor Axisa Minor Axisb E llipse Rotation Angleθ0.009390.0040254.00Note : Citizen Electronics maintains chromaticity ( x, y ) +/-0.0050.300.350.400.450.300.350.400.450.50yxx-y chart CIE19314,000K3,000K2,700KBlack Body Locus3-step3. Mechanical Dimensions・Internal Circuit12 S 01 P Protection deviceLED deviceCathodeAnodeUnit : mmTolerances unless otherwise specified : +/-0.3Marking 1 : Serial No.Marking 2 : Code No.CRI CCTDies count in parallel Dies count in seriesCLU7x2 seriesMarking 3 : Data MatrixAC 12 01 ** ** *4. Characteristic Curves4-1. Forward Current Characteristics / Temperature CharacteristicsForward Current vs. Forward VoltageForward Current vs. Relative Luminous FluxTc=25CTc=25CCase Temperature vs. Forward VoltageCase Temperature vs. Relative Luminous FluxIf=175mAIf=175mA32.034.036.038.040.0100200300400V f [V ]If [mA]0%50%100%150%200%0100200300400R e l a t i v e L u m i n o u s F l u x [a .u .]If [mA]34.035.036.037.038.020406080100120V f [V ]Tc [C]0%25%50%75%100%125%020406080100120R e l a t i v e L u m i n o u s F l u x [a .u .]Tc [C]4-2. Optical CharacteristicsTj=85CIf=175mASpectrum : CRI(Ra) 90 Min.0%10%20%30%40%50%60%70%80%90%100%380430480530580630680730780R a d i a t i v e I n t e n s i t yWave length [nm]4,000K3,000K 2,700K4-2. Optical Characteristics (continued)4-3. Derating CharacteristicsRadiation Characteristic 0%20%40%60%80%100%XY80°70°60°50°40°30°20°10°-80°-70°-60°-50°-20°-30°-40°-10°90°-90°Case Temperaturevs. Allowable Forward Current50100150200250300350020406080100120I f [m A ]Tc [C]XYTest ItemTest ConditionIF=175mA , Ta= 25C (with Al-fin) ×1000hrs -40 C × 1000 hours -40 C × 30 minutes – 100 C × 30 minutes, 100 cyclesThermal Shock TestContinuous Operation Test High Temperature Storage TestLow Temperature Storage Test Moisture-proof Test IF=175mA ,Tj=140C (with Al-fin) ×1000hrs 100 C × 1000 hours 85 C, 85 %RH for 500 hours5. Reliability5-1. Reliability Test5-2. Failure Criteria( Tc=25C )U defines the upper limit of the specified characteristics. S defines the initial value.Note : Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be return to the normal ambient conditions after the completion of each test.Total Luminous FluxΦvIf=175mA<S × 0.85Measuring Item Symbol Measuring ConditionFailure CriteriaForward Voltage Vf If=175mA >U × 1.11. TYPEe.g. CLU7A2-1201C92. P.No. ( Customer's P/N )3. Lot No.19Y 5035(b)(a) Last two digit of the year 19 : Year 2019(b) Production month Y : November Note: October, November and December are designated X,Y and Z.(c) CE's control number 4. Quantity(a)(c)Example of indication labele.g.6. Packing Specification6-1. PackingAn empty tray is placed on top of a 6-tier tray which contain 54 pieces each.( Smallest packing unit : 324 pieces )A label with product name, quantity and lot number is placed on the upper empty tray.Tray ( Dimensions: 310 x 210 x 12 mm / Materials: Electrically conductive PS ) CUSTOMERTYPE P.NO Lot No Q'ty: CLU***-******-******* : ****** : ******* : ***--- ( 1 ) --- ( 2 ) --- ( 3 ) --- ( 4 )Unit : mmProduct : 54 pcs/tray7. Precaution7-1. Handling with care for this product-Both the light emitting area and white rim around the light emitting area is composed of resin materials.Please avoid the resin area from being pressed, stressed, rubbed, come into contact with sharp metal nail(e.g. edge of reflector part) because the function, performance and reliability of this product are negatively impacted.-Please be aware that this product should not come into contact with any other parts while incorporating in your lightingapparatus or your other products.-Please be aware that careful handling is required after the attachment of lead wires to prevent the application of any loadto the connections.-For more information, please refer to application note "Instruction Manual(COB LED Package)".7-2. Countermeasure against static electricity-Handling of this product needs countermeasures against static electricity because this is a semiconductor product.-Please take adequate measures to prevent any static electricity being produced such as the wearing of a wristband oranti-static gloves when handling this product.-Every manufacturing facility in regard to the product (plant, equipment, machine, carrier machine and conveyance unit)should be connected to ground and please avoid the product to be electric-charged.-ESD sensitivity of this product is over 1000V (HBM, based on JEITA ED-4701/304).-After assembling the LEDs into your final product(s), it is recommended to check whether the assembled LEDs aredamaged by static electricity (electrical leak phenomenon) or not.-It is easy to find static damaged LED dies by a light-on test with the minimum current value.7-3. Caution of product assembly-Regarding this product assembling on the heat sink, it is recommended to use M3 screw.It might be good for screw tightening on the heat sink to do temporary tightening and final tightening.In addition, please don’t press with excess stress on the product.-The condition of the product assembling on the heat sink and the control of screw tightening torque needs to be optimized according to the specification of the heat sink.-Roughness, unevenness and burr of surface negatively impact thermal bonding between the product and heat sink andincrease heat thermal resistance between them.Confidence of thermally and mechanical coupling between the product and heat sink are confirmed by checkingthe mounting surface and measuring the case temperature of the product.-In order to reduce the thermal resistance at assembly, it might be good to use TIM (Thermal Interface Material) on whole contact surface of the product.In case of using thermal grease for the TIM, it might be good to apply uniformly on the contact surface of the product.In case of using thermal sheet for the TIM, it might be good to make sure that the product is NOT strained by stress when the screws are tightened for assembly.-For more information, please refer to application note "Instruction Manual(COB LED Package)".7-4. Thermal Design-The thermal design to draw heat away from the LED junction is most critical parameter for an LED illumination system. High operating temperatures at the LED junction adversely affect the performance of LED’s light output and lifetime. Therefore the LED junction temperature should not exceed the absolute maximum rating in LED illumination system. -The LED junction temperature while operation of LED illumination system depends upon thermal resistance of internal LED package (Rj-c), outer thermal resistances of LED package, power loss and ambient temperature. Please take both of the thermal design specifications and ambient temperature conditions into consideration for the setting of driving conditions.-For more information, please refer to application note "Thermal Management", "Instruction Manual(COB LED Package)".7-5. Driving Current-A constant current is recommended as an applying driving current to this product.In the case of constant voltage driving, please connect current-limiting resistor to each products in series and control the driving current to keep under the absolute maximum rating forward current value.-Electrical transient might apply excess voltage, excess current and reverse voltage to the product(s).They also affect negative impact on the product(s) therefore please make sure that no excess voltage, no excess current and no reverse voltage is applied to the product(s) when the LED driver is turn-on and/or turn-off.-For more information, please refer to application note "Driving", "Instruction Manual(COB LED Package)".7-6. Lighting at a minimum current value-A minimum current value of lighting of all dice is 15mA.When a minimum current is applied, LED dice may look different in their brightness due to the individual difference of the LED element, and it is not a failed product.7-7. Electrical Safety-This product is designed and produced according to IEC 62031:2008(IEC 62031:2008 LED modules for general lighting. Safety specification)-Dielectric voltage withstand test has been conducted on this product to see any failure after applyingvoltage between active pads and aluminum section of the product, and to pass at least 500V.-Considering conformity assessment for IEC62031:2008, almost all items of the specification depend uponyour final product of LED illumination system.Therefore, please confirm with your final product for electrical safety of your product.As well, the products comply with the criteria of IEC62031:2008 as single LED package.- A minimum current value of lighting of all dice is 5 mA. When a minimum current is applied, LED dice may look different in their brightness due tothe individual difference of the LED element, and it is not a failed product.7-8. Recommended soldering Condition (This product is not adaptable to reflow process.) -For manual solderingPlease use lead-free soldering.Soldering shall be implemented using a soldering bit at a temperature lower than 350C, and shall befinished within 3.5 seconds for one land.No external force shall be applied to resin part while soldering is implemented.Next process of soldering should be carried out after the product has return to ambient temperature.Contacts number of soldering bit should be within twice for each terminal.* Citizen Electronics cannot guarantee if usage exceeds these recommended conditions.Please use it after sufficient verification is carried out on your own risk if absolutely necessary.-For more information, please refer to application note "Instruction Manual(COB LED Package)".7-9. Eye Safety-The International Electrical Commission (IEC) published in 2006 IEC 62471”2006 Photobiological safety of lamps and lamp systems ” which includes LEDs within its scope.When sorting single LEDs according to IEC 62471, almost all white LEDs can be classifiedas belonging to either Exempt Group (no hazard) or Risk Group 1 (low risk).-However, Optical characteristics of LEDs such as radiant flux, spectrum and light distribution are factorsthat affect the risk group determination of the LED, and especially a high-power LED, that emits lightcontaining blue wavelengths,might have properties equivalent to those of Risk Group 2 (moderate risk).-Great care should be taken when directly viewing an LED that is driven at high current, has multipleuses as a module or when focusing the light with optical instruments, as these actions might greatlyincrease the hazard to your eyes.-It is recommended to regard the evaluation of stand-alone LED packages as a referenceand to evaluate your final product.7-10. This product is not designed for usage under the following conditions.If the product might be used under the following conditions, you shall evaluate its effect and appropriate them. In places where the product might:-directly and indirectly get wet due to rain and/or at place with the fear.-be damage by seawater and/or at place with the fear-be exposed to corrosive gas (such as Cl2, H2S, NH3, SOx, NOx and so on) and/or at place with the fear.-be exposed to dust, fluid or oil and/or at place with the fear.Precautions with regard to product use(1) This document is provided for reference purposes only so that CITIZEN ELECTRONICS' products are used as intended. CITIZEN ELECTRONICS neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of CITIZEN ELECTRONICS or any third party with respect to the information in this document. Formal specifications must be exchanged and signed by both parties prior to mass production.(2) All information included in this document such as product data, diagrams, charts, is current as of the date this document is issued.Such information, however, is subject to change without any prior notice.(3) CITIZEN ELECTRONICS has used reasonable care in compiling the information included in this document, but CITIZEN ELECTRONICS assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document.(4) Absent a written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, CITIZEN ELECTRONICS assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or no infringement.(5) Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability, products can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. In addition, customers are also responsible for determining the appropriateness of use of any information contained in this document such as application cases not only by evaluating on their own but also by using the entire system. CITIZEN ELECTRONICS assumes no liability for customers' product design or applications.(6) The product is intended to be used for general electronic equipment such as general lighting, home appliances, and information-communication equipment. It is not designed or manufactured to be used for special application (e.g. automobiles, trains, ships, airplanes, spaceships, submarine repeaters, atomic energy control systems, traffic equipment, combustion equipment, life-support systems, and safety devices). We will not guarantee any application suitability for goods like those described above that require special quality and reliability. In cases where the product is used in special applications and it causes extensive property damage, threatens human life or damages the human body, we will not be held liable. The product is not in conformity to ISO/TS16949 (IATF16949) or intended to be used for in-vehicle application.(7) Do not reverse-engineer the product including disassemble or analyze without our approval.(8) Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding the information contained in this document, or if you have any other inquiries.is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN.。
LED灯产品规格书 -
Mode No: VPT-CL011H03WADD:3-F ,No.12 Bldy ,Longwangmiao lndusustyZone.BaishixiaFuyongStreet.Shenzhen,Guangdong,ChinaPhone:+86-755-61148611Fax:+86-755-61148622 V-Photron Technology Co. Ltd. 偉富創光電科技有限公司FEATURES▉ Lamp Warranty : 1 years product warranty▉ Long Operating Life : 50,000+ Hours (5.7+ Years) ▉ Low power consumption, energy saving ▉ Safety Assurance: RoHS compliant ▉ Easy installation, compatible with socket.▉Radiation free, no UV nor IR lights lights, best to beuse as display light for paintings, photos or products, prevent color change and damage on displayed goods.▉ Solid-State : Fast Turn-On, No Power Surge ▉ Low heat, excellent heat sink design, does not heat up as traditional Halogen bulb, help to save on air conditioning expenses.OUTLINE DIMENSIONBenefits▉ Clean Light: ConstantLight Output, No Halation▉Eco-Friendly:No Mercury,No Lead Content▉ Easy Installation: instantreplacement in type fixtures▉ Reduces Light Pollution,“Dark Skies” Initiative Compatible▉ Higher Efficacy: LEDsAre 10 Times More Efficient than Incandescent Lighting ▉ Major Energy Savings: Up to80% over IncandescentsMode No: VPT-CL011H03WADD:3-F ,No.12 Bldy ,Longwangmiao lndususty Zone.BaishixiaFuyongStreet.Shenzhen,Guangdong,ChinaPhone:+86-755-61148611 Fax:+86-755-61148622 E-mail:sales@Website:http://www.v-photron. comV-Photron Technology Co. Ltd. 偉富創光電科技有限公司Specifications▉Input Voltage:AC110-240V▉ LED Color: 2700K -3000K, 4500K -5500K 6000K- 6500K ▉ Ambient Operating Temperature Range: -20°C to +40°C ▉ Power consumption: 3W ▉ Light source: High Power LED ▉LED Qty(pcs):1pcsApplication▉ Home ▉ Restaurant▉ Store ▉ Hotel ▉ Bank ▉ OfficePrecautionsMake sure that power is switched off before connecting or disconnecting fixture.NOTE▉ These models are for use with standard ON/OFF switches only,not with a dimmer .Use with adimmer, relay or other current / voltage control circuit device will VOID WARRANTY.▉ Turn OFF the power from fixture before installation.▉ If the current light fixture has a cover in front, please remove it for better optic and heat exchange. ▉ Not suitable for high temperature and moisture area. ▉ User should be cautioned not to stare at the light. The bright light can damage eyes.Luminaire Photometric Report Polar Candela DistrbutionItem No ：VPT-CL011H03W Color Temperature:3500K-4500KFlux (lm)：160-200lm Power consumption: 3W。
2025led灯珠 规格书
2025led灯珠规格书【原创实用版】目录1.2025LED 灯珠概述2.规格参数3.应用领域4.发展前景正文【2025LED 灯珠概述】2025LED 灯珠，即直径为 2.5 毫米的 LED 灯珠，是一种采用半导体材料制作的高效节能照明产品。
相较于传统的照明设备，2025LED 灯珠具有更高的光效、更低的能耗、更长的寿命以及更小的体积等优点，因此在照明市场具有广泛的应用前景。
【规格参数】2025LED 灯珠的规格参数主要包括以下几个方面：1.尺寸：直径为2.5 毫米，长度为 1.2 毫米。
2.光效：光效是指 LED 灯珠发出的光功率与消耗的电功率之比，单位为流明/瓦特（lm/W）。
2025LED 灯珠的光效一般在 100-150lm/W 之间，部分产品甚至可达到 200lm/W 以上。
3.色温：色温是指光源所发出的光的颜色，用单位“开尔文（K）”表示。
2025LED 灯珠的色温范围较广，一般可分为暖白光（2700-3200K）、中性白光（3500-4500K）和冷白光（4500-6500K）三类。
4.显色指数：显色指数是指 LED 灯珠对物体颜色的还原能力，用单位“拉（Ra）”表示。
2025LED 灯珠的显色指数一般在 70-90Ra 之间，部分产品甚至可达到 90Ra 以上。
5.寿命：寿命是指 LED 灯珠在正常工作条件下能够保持正常发光的时长，一般以小时为单位。
2025LED 灯珠的寿命一般在 5 万小时以上，部分产品甚至可达到 10 万小时以上。
【应用领域】2025LED 灯珠凭借其优异的性能，广泛应用于以下几个领域：1.家庭照明：如台灯、吸顶灯、球泡灯等。
2.商业照明：如店铺、办公室、酒店等场所的照明。
3.交通照明：如道路、隧道、停车场等场所的照明。
4.景观照明：如城市景观、公园、广场等场所的照明。
5.植物生长照明：适用于蔬菜、水果、花卉等植物的生长周期，可提高产量和品质。
【发展前景】随着全球环保意识的提高和节能减排的需求，LED 照明产业得到了快速发展。
LED平板灯规格书1
4U
4U
阳光照明
2U
4U
屏蔽室LED灯安装案例
阳光照明
屏蔽室LED灯选型
屏蔽室照明：
型号：BP60-60-D，安装尺寸：600X600X35mm；功率：30W，屏蔽室按照30m² ， 每个屏蔽室安装6个，可超出500LM/m² 屏蔽室要求；可选用颜色：冷白、正白、 暖白。
设备轮廓照明：
阳光照明led灯技术参数序号参数60x6060x120射灯壁灯壁灯备注功率30w60w5w3w5w色温2500k7800k显色指数ra65ra光通量lm33006600660330660寿命寿命80000小时重量185kg37kg115kg072kg126kg阳光照明led灯技术参数序号参数60x6060x120射灯壁灯壁灯备注输入电压85265v5060hz功率因数pf095电源效率97输出电压dc
阳光照明
LED灯技术参数
序号 1 2 3 4 5 6 7 8 参数 功率 色温 显色指数 光通量lm 发光颜色 寿命 重量 价格 1.85Kg ? 3300 60X60 30W 60X120 60W 射灯 5W 2500K-7800K Ra ≧ 65 /Ra ≧ 80 6600 660 330 660 壁灯 3W 壁灯 5W 备注
正白、暖白、冷白
正白、暖白、冷白、红、黄、 可定 蓝、绿 制 1.15Kg ? 0.72Kg ? 1.26Kg ?
寿命≧80000小时 3.7Kg ?
阳光照明
LED灯技术参数
序号 1 参数 输入电压 60X60 60X120 射灯 壁灯 壁灯 备注 85-265V/50-60HZ
2
3 4 5 6
功率因数
电源效率 输出电压 功率 MTBF
LED三防灯规格书.pdf
LED三防灯产品规格书LED 三防吊灯产品规格书一、应用范围适用于各类型适用于工厂、仓库、冷库、地铁、机场、车库、体育场馆等潮湿、多灰尘场所，各种粉状成品半成品加工场、蒸汽、水汽处理车间等高档办公写字楼，百货商场，无尘车间等高档场所的照明。
二、产品特色1、节能环保，无紫外线、红外线和汞污染，符合欧盟 ROHS 要求；2、贴片LED白光，采用台湾超高亮度3528芯片以低衰减工艺封装而成第三代2835灯珠，单颗LED达到11-12lm，达到1000小时零衰减。
3、灯管外壳采用T8纯铝合金外壳加V0级光学阻燃PC罩3、100%纯聚碳酸酯外壳，防紫外线强。
防紫外线V0级光学PC透明防护罩。
外壳和防护罩纯聚碳酸酯材质的运用，抗击力高达20J，比普通钢化玻璃高出2倍，是塑料制品的10倍。
4、内部设计有特殊的棱镜，输出光效果更好，且便于清洁维护。
5、外观轻盈，款式新颖，便于安装和运输。
三、产品外观:四、产品规格LED 三防吊灯产品规格书LED 三防吊灯产品规格书光学和热学参数配光曲线温升测试图六、包装、运输和贮存的要求1、包装PE 袋200（开口尺寸）*1400*0.04mm内盒L1300*W250*H145mm外箱L1300*W250*H270mm规格书 1 份净重 2.75kg2、每一纸箱的正面及侧面贴上外箱标；灯具上贴产品标；3、运输用包装箱封严后交付，轻拿轻放，包装箱上标示产品名称，数量等信息；4、贮存要求：防潮，防尘，防压，防跌倒，防酸碱物质，避免阳光直射和结露；5、贮存期限：1 年。
超过期限后的必须重检（电性能）合格后才能再使用。
七、安装方法1、灯具必须配带PC透明防护罩；2、打开防护罩更换灯管时，必须切断电源；3、灯具输入为 3 芯护套线，其中棕色线接电源火线、蓝色线接电源零线、黄绿线接电源地线。
接线处用防水绝缘胶布包扎好；4、将灯管扣入安装好的支架里面；5、供电电压在灯具的额定工作范围内，再打开关点亮灯具；观察灯具点亮过程是否正常。
5630LED灯珠中文规格书
深圳市鑫冠明科技有限公司产品规格书XGM5630w深圳市鑫冠明科技有限公司目录1.产品描述2.最大额定值3.光电参数4.典型光电特性曲线5.分光标准6.可靠性测试7.产品规格尺寸8.料盘结构和包装9.回流焊10.使用注要事项深圳市鑫冠明科技有限公司1.产品描述特性◆发光角度:120度◆规格尺寸:5.60mm*3.00mm*0.80mm◆符合RoHS标准无铅焊接◆高流明高光效典型应用◆LED球泡灯◆日光灯◆室内室外照明◆建筑/装饰照明◆广告字、广告灯箱深圳市鑫冠明科技有限公司材料物料项目类型支架底部PPA与金属散热片结合支架外壳耐热聚合物封装树脂硅树脂电极镀银铜金固晶材料导热硅胶芯片材料三安2.最大额定值 =25℃参数符号数值单位消耗功率500 mW 正向电流150 mA 反向电压 5 v 工作温度范围-20~+85℃储存温度范围-35~+85℃脉冲正向电流300 mA 抗静电能力ESD 2000(HBM) V深圳市鑫冠明科技有限公司3.光电参数参数符号等级条件最小最大Unit输出流明L1=150mA40 45lm L2 45 50L3 50 55L4 55 60输出电压V1=150mA2.93.0V V2 3.0 3.1V3 3.1 3.2V4 3.2 3.3V5 3.3 3.4发光角度 2 - =150mA 118 123 deg显色指数-=150mA 80 85 - 公差: :±0.03V,:±2%,:±24.典型光电特性曲线深圳市鑫冠明科技有限公司光谱图深圳市鑫冠明科技有限公司5.分光标准色度图(ANSI C78.377A)深圳市鑫冠明科技有限公司◆Bin区分布2700K 暂无Rank CIE-X CIE-Y Rank CIE-X CIE-Y27C01 (2600-2800K) 0.44810.415227C02(2600-2800K)0.45830.424暂无0.45370.40310.4640.41160.4640.41160.47440.42040.45830.4240.46850.43293000KRank CIE-X CIE-Y Rank CIE-X CIE-Y Rank CIE-X CIE-Y30C01 (2900-3100K) 0.4271 0.39930C020.44940.415330C030.43860.4181 0.4373 0.3964 0.44940.41530.44940.4153深圳市鑫冠明科技有限公司0.4433 0.4057 (2900-3100K) 0.44940.4153(2900-3100K) 0.45540.42460.4328 0.4085 0.43860.41810.44430.42764000K 无Rank CIE-X CIE-Y Rank CIE-X CIE-Y Rank CIE-X CIE-Y40C01 (3900-4100K) 0.37080.371240C02(3900-4100K)0.37600.381840C03(3900-4100K)0.38220.3945 0.38120.36600.38590.37620.39200.3888 0.38590.37620.39200.38880.39740.4002 0.37600.38180.38220.39450.38790.40615000K 无Rank CIE-X CIE-Y Rank CIE-X CIE-Y50C01 (5000-5300K) 0.3350.351850C02(4700-5000K)0.34440.367 0.33790.33970.34690.3542 0.34690.35420.35580.3688 0.34440.3670.35390.38246500KRank CIE-X CIE-Y Rank CIE-X CIE-Y Rank CIE-X CIE-Y60C01 (6500-7000K) 0.30170.319260C02(6000-6500K)0.31040.335360C03(5700-6000K)0.32030.3531 0.30640.31240.31460.32710.32390.3428 0.31460.32710.32390.34280.32750.3500 0.31040.33530.32030.35310.32360.35916. 可靠性测试测试项目测试条件测试周期不良数量冷热冲击=-40℃(30分钟)~ 100℃ (30分钟)100 循环0/50高温储存=100℃1000小时0/50深圳市鑫冠明科技有限公司1000小时0/50高温高湿储存=60℃, RH=90%1000小时0/50低温储存=-40℃1000小时0/50常温老化=25℃, =150mA高温老化1000小时0/50=80℃, =150mA1000小时0/50低温老化=-40℃, =150mA抗静电测试1KV 3次0/50回流焊3次0/50250℃< 10sec.7.产品规格尺寸注释：1.所有尺寸单位为毫米2.如果无其它注明，公差范围通常采用±0.02毫米。
2025led灯珠 规格书
2025led灯珠规格书（最新版）目录1.2025LED 灯珠概述2.规格书内容详述3.2025LED 灯珠的优势与应用正文一、2025LED 灯珠概述2025LED 灯珠是一款具有高性能、低能耗、环保等特点的 LED 灯珠产品。
其尺寸为 2.5mm×2.5mm，采用了先进的 LED 芯片技术，使得产品在光照效果、稳定性和寿命等方面表现优越。
2025LED 灯珠广泛应用于各种照明、装饰、显示等领域，为现代生活带来便捷与美观。
二、规格书内容详述1.外形尺寸：2.5mm×2.5mm2.颜色：白光、暖白光、冷白光、红、绿、蓝等3.功率：0.06W-0.1W4.电流：20mA-1000mA5.电压：3.0V-3.4V6.光效：>80lm/W7.色温：2700K-6500K8.显色指数：>759.寿命：>50000 小时10.工作温度：-30℃-+60℃11.储存温度：-40℃-+80℃12.抗震性能：1000 次三、2025LED 灯珠的优势与应用1.节能环保：2025LED 灯珠具有低能耗特点，较传统照明产品节能 60% 以上，有助于减少碳排放，保护环境。
2.长寿命：2025LED 灯珠寿命长达 50000 小时，是传统照明产品的数倍，大大降低了维护成本。
3.良好的光照效果：2025LED 灯珠光效高，显色指数优良，能提供舒适、自然的光线环境。
4.广泛的应用领域：2025LED 灯珠可用于各类照明产品，如台灯、吸顶灯、筒灯等；以及显示屏、交通信号灯、车灯等特殊应用领域。
总之，2025LED 灯珠凭借其优异的性能和环保特点，已成为照明市场的主流产品。
LED蜡烛灯规格书
LED蜡烛灯-03W规格书一.该产品具有如下技术特点:1.高效节能——在相同亮度情况下,LED节能灯一千小时仅耗3度电（3W）。
2.超长寿命——使用寿命达五万小时以上，普通节能灯管使用寿命六千小时，普通白炽灯使用寿命一千小时。
3.光线健康—光线中不含紫外线和红外线，无辐射，普通节能灯管和白炽灯光线中含有紫外线和红外线。
4.绿色环保——不含汞和铅等有害元素，得利于回收和利用，而且不会产生电磁干扰，普通灯管中含有汞和铅等有害元素，节能灯中的电子镇流。
5.保护视力——直流驱动，无频闪。
(普通灯都是交流驱动，定有频闪)。
6.安全系数高——所需要的电压，电流较小，发热较小，不产生安全隐患。
7.防蚊虫——LED灯由于没有紫外线，不会像传统日光灯一样吸引蚊虫，从而有利于维护室内清洁。
XD-LZD0301实物照片XD-LZD0302实物照片二.产品参数1、外观图与尺寸图XD-LZD0301尺寸XD-LZD0302尺寸产品图片产品结构图片注:以上的尺寸以mm为单位2、产品详细参数型号规格XD-TD1204 发光角度130-150°输入电压AC95-265V 储存温度和湿度-40℃~80℃ / 10%~90%电源频率50Hz ~60Hz 产品尺寸∮192mm*70mm 开孔：170mm LED功率12W 灯具毛重≤0.5kg显色指数Ra﹥70 使用寿命50000 H转换效率>95% 额定光衰≤15%功率因素>0.8 工作温度和湿度-20℃~45℃ / 10%~90% 光通量正白1350-1200LM光源色温正白 5500-6500K暖白1250-1100LM 暖白 3000-3500K自然白3150-2950LM 自然白 4000-4500K三.使用方法1.安装说明筒灯安装说明1、连接导线正确按照安装说明书连接导线与电源 AC 端，安装时须由专业人员操作；敬请遵循接线安全规范。
2、端子对接将电源端子线与灯具端子线对接.3、装入天花板用手把弹簧卡向后旋转至图示角度，同时将灯具放入天花板内。
2025led灯珠 规格书
2025led灯珠规格书（原创版）目录1.2025LED 灯珠概述2.2025LED 灯珠规格参数3.2025LED 灯珠的特点与优势4.2025LED 灯珠的应用领域5.2025LED 灯珠的环保与节能性正文一、2025LED 灯珠概述2025LED 灯珠是一款具有高性能、环保节能的 LED 灯珠产品，其设计理念源于对未来照明需求的深度挖掘，以满足市场对高效、绿色照明产品的期待。
二、2025LED 灯珠规格参数1.尺寸：2.0mm x 2.5mm x 1.0mm2.电压：3.0-3.4V3.电流：30-60mA4.功率：0.06-0.18W5.色温：2700K-6500K6.显色指数：Ra>757.光效：>150lm/W8.寿命：>50000 小时三、2025LED 灯珠的特点与优势1.高亮度：2025LED 灯珠具有高光效，能提供充足的光线，满足照明需求。
2.宽色温范围：可根据不同场景和需求选择合适的色温，满足多样化照明需求。
3.高显色指数：Ra>75，能真实还原物体颜色，提供舒适视觉体验。
4.长寿命：使用寿命长达 50000 小时，降低了维护成本。
5.节能环保：低功耗设计，节约能源，减少碳排放。
四、2025LED 灯珠的应用领域1.家庭照明：适用于台灯、吸顶灯、吊灯等各类家居照明产品。
2.商业照明：适合用于办公室、餐厅、酒店等商业场所的照明。
3.工业照明：可应用于工厂、仓库等场所的照明，提高工作效率。
4.景观照明：适用于城市景观、公园、广场等户外照明场合。
五、2025LED 灯珠的环保与节能性2025LED 灯珠的节能性能表现在其低功耗设计，相较于传统照明产品，能节约大量能源。
同时，其环保特性体现在长寿命、无汞、无紫外线辐射等方面，减少了对环境的污染。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Mode No: VPT-CL011H03W
ADD:3-F ,No.12 Bldy ,Longwangmiao lndususty
Zone.Baishixia
FuyongStreet.Shenzhen,Guangdong,China
Phone:+86-755-61148611
Fax:+86-755-61148622 V-Photron Technology Co. Ltd. 偉富創光電科技有限公司
FEATURES
▉ Lamp Warranty : 1 years product warranty
▉ Long Operating Life : 50,000+ Hours (5.7+ Years) ▉ Low power consumption, energy saving ▉ Safety Assurance: RoHS compliant ▉ Easy installation, compatible with socket.
▉Radiation free, no UV nor IR lights lights, best to be
use as display light for paintings, photos or products, prevent color change and damage on displayed goods.
▉ Solid-State : Fast Turn-On, No Power Surge ▉ Low heat, excellent heat sink design, does not heat up as traditional Halogen bulb, help to save on air conditioning expenses.
OUTLINE DIMENSION
Benefits
▉ Clean Light: Constant
Light Output, No Halation
▉Eco-Friendly:No Mercury,
No Lead Content
▉ Easy Installation: instant
replacement in type fixtures
▉ Reduces Light Pollution,
“Dark Skies” Initiative Compatible
▉ Higher Efficacy: LEDs
Are 10 Times More Efficient than Incandescent Lighting ▉ Major Energy Savings: Up to
80% over Incandescents
Mode No: VPT-CL011H03W
ADD:3-F ,No.12 Bldy ,Longwangmiao lndususty Zone.Baishixia
FuyongStreet.Shenzhen,Guangdong,China
Phone:+86-755-61148611 Fax:+86-755-61148622 E-mail:sales@
Website:http://www.v-photron. com
V-Photron Technology Co. Ltd. 偉富創光電科技有限公司
Specifications
▉Input Voltage:AC110-240V
▉ LED Color: 2700K -3000K, 4500K -5500K 6000K- 6500K ▉ Ambient Operating Temperature Range: -20°C to +40°C ▉ Power consumption: 3W ▉ Light source: High Power LED ▉LED Qty(pcs):1pcs
Application
▉ Home ▉ Restaurant
▉ Store ▉ Hotel ▉ Bank ▉ Office
Precautions
Make sure that power is switched off before connecting or disconnecting fixture.
NOTE
▉ These models are for use with standard ON/OFF switches only,not with a dimmer .Use with a
dimmer, relay or other current / voltage control circuit device will VOID WARRANTY.
▉ Turn OFF the power from fixture before installation.
▉ If the current light fixture has a cover in front, please remove it for better optic and heat exchange. ▉ Not suitable for high temperature and moisture area. ▉ User should be cautioned not to stare at the light. The bright light can damage eyes.
Luminaire Photometric Report Polar Candela Distrbution
Item No ：VPT-CL011H03W Color Temperature:3500K-4500K
Flux (lm)：160-200lm Power consumption: 3W。