诺瓦科技LED光探头NS060-5A规格书英文版

合集下载

诺瓦科技WIFI-LED控制卡T2-4G规格书

Taurus SeriesMultimedia PlayersT2-4G Specifications Doc u ment V ersion:V1.3.2Doc u ment Number:NS120100339Copyright ©2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a tradem ark of Xi’an NovaStar Tech Co., Ltd.Statement i Table of ContentsTaurus Series Multimedia PlayersT2-4G SpecificationsTable of Contents Table of Contents ............................................................................................................................ii1 Overview (1)1.1 Introduction .................................................................................................................................................. 11.2 Application ...................................................................................................................................................22 Features (3)2.1 Powerful Processing Capability (3)2.2 Omnidirectional Control Plan (3)2.3 Synchronous and Asynchronous Dual-Mode (4)2.4 Wi-Fi AP Connection (4)2.5 4G Module (5)2.6 Remote Screen on/off Control (5)2.7 Connecting to PC Through USB ..................................................................................................................53 Hardware Structure (6)3.1 Appearance (6)3.2 Dimensions (8)4 Software Structure (9)4.1 System Software ..........................................................................................................................................94.2 Related Configuration Software ...................................................................................................................95 Product Specifications ................................................................................................................ 106 Audio and Video Decoder Specifications (11)6.1 Image (11)6.1.1 Decoder (11)6.1.2 Encoder (11)6.2 Audio ..........................................................................................................................................................126.2.2 Encoder (12)6.3 Video (13)6.3.1 Decoder (13)6.3.2 Encoder (14) iiT2-4G Specifications 2 Features1 Overview1 Overview 1.1 IntroductionTaurus series products are NovaStar's second generation of multimedia playersdedicated to small and medium-sized full-color LED displays.FeaturesThe T2-4G of the Taurus series products (hereinafter referred to as “T2-4G”) has thefollowing features:●Powerful processing capability●Omnidirectional control plan●Synchronous and asynchronous dual-mode●Wi-Fi AP connection●4G module●Remote screen on/off control●Capable of connecting to PC through USBIn addition to solution publishing and screen control via PC, mobile phones and LAN,the omnidirectional control plan also supports remote centralized publishing andmonitoring.Other Hardware FeaturesThe hardware of the T2-4G also has the following features:●Loading capacity up to 650,000 pixels, with the maximum width of 1920 pixelsand maximum height of 1080 pixels●Wired Gigabit Ethernet●Stereo audio output●HDMI input and auto full-screen display●USB drive importing display●Onboard light sensor connector allowing for automatic and scheduled brightnessT2-4G Specifications 3 Hardware Structure adjustment1 Overview 1.2 ApplicationTaurus series products can be widely used in LED commercial display field, such asbar screen, chain store screen, advertising machine, mirror screen, retail store screen,door head screen, on board screen and the screen requiring no PC.Classification of Taurus’ application cases is shown in Table 1-1. Table1-1 Application2 Features 2.1 Powerful Processing CapabilityT2-4G Specifications 3 Hardware Structuresor●Support for 1080P video hardware decoding● 1 GB operating memory●8 GB on-board internal storage space with 4 GB available for users2.2 Omnidirectional Control PlanTable 2-1 Control PlanCluster control plan is a new internet control plan featuring following advantages:●More efficient: Use the cloud service mode to process services through a uniformplatform. For example, VNNOX is used to edit and publish solutions, andNovaiCare is used to centrally monitor display status.●More reliable: Ensure the reliability based on active and standby disasterrecovery mechanism and data backup mechanism of the server.●More safe: Ensure the system safety through channel encryption, data fingerprintand permission management.●Easier to use: VNNOX and NovaiCare can be accessed through Web. As long asthere is internet, operation can be performed anytime and anywhere.●More effective: This mode is more suitable for the commercial mode ofT2-4G Specifications 2 Features advertising industry and digital signage industry, and makes informationspreading more effective.2.3 Synchronous and Asynchronous Dual-ModeThe T2-4G supports synchronous and asynchronous dual-mode, allowing moreapplication cases and being user-friendly.When internal video source is applied, the T2-4G is in asynchronous mode; whenHDMI-input video source is used, the T2-4G is in synchronous mode. Content can bescaled and displayed to fit the screen size automatically in synchronous mode.Users can manually and timely switch between synchronous and asynchronousmodes, as well as set HDMI priority.2.4 Wi-Fi AP ConnectionThe T2-4G has permanent Wi-Fi AP. The SSID is "AP + the last 8 digits of the SN",for example, "AP10000033", and the default password is "12345678". The T2-4Grequires no wiring and users can manage the displays at any time by connecting tothe T2-4G via mobile phone, Pad or PC.T2-4G’s Wi-Fi AP signal strength is related to the transmit distance and environment.Users can change the Wi-Fi antenna as required.2.5 4G ModuleThe T2-4G is designed with 4G module. You can connect to the Internet via 4Gnetwork after turning on mobile data network in the client software ViPlex.Wired network is prior to 4G network. When both of the networks are available, theT2-4G Specifications 3 Hardware Structure T2-4G will choose signals automatically according to the priority.2.6 Remote Screen on/off ControlThe T2-4G can turn on or off screens in real time or as scheduled through VNNOXand ViPlex.During hardware connection, the maximum input voltage of the delay is DC 24 V andthe maximum current is 3 A.2.7Connecting to PC Through USBThe T2-4G offers one USB Type B port allowing PC to be directly connected withoutrequiring other operations and you can configure screens, publish solutions , etc. byusing NovaLCT and ViPlex Express on Windows.T2-4G Specifications 2 Features3 Hardware Structure 3.1 AppearancemodesNote: All product pictures shown in this document are for illustration purpose only. Actual product may vary.Table 3-1 Connectors and buttons of the T2-4GNote: All product pictures shown in this document are for illustration purpose only. Actual product may vary.Table 3-2 Indicators of the T2-4GT2-4G Specifications3.2 DimensionsThe total thickness (board thickness + thickness of the components on the front andback side) is no greater than 20.7 mm.Unit of the dimension chart is “mm”. Ground connection is enabled for location hole(GND).www.novastar.tech 15T2-4G Specifications 3 Hardware Structure4 Software Structure4 Software Structure4.1 System Software●Android operating system software●Android terminal application software ●FPGA programNote: The third-party applications are not supported.4.2 Related Configuration SoftwareTable 4-1 Related configuration softwareT2-4G Specifications5 Product Specifications5 Product SpecificationsWi-Fi AntennaAudio and VideoDecoder6.1.2 Encoder6Specifications6.1 Image6.1.1 Decoder6.2 AudioT2-4G Specifications 6 Audio and Video Decoder Specificationswww.novastar.tech 21Audio and Video Decoder SpecificationsH.264.。

诺瓦科技LED显示屏控制台C1规格书

诺瓦科技LED显示屏控制台C1规格书C1Desktop ConsoleSpecificationsXi’anNovaStarTechCo.,Ltd.Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability,and without notice. Any NovaStar may make improvements and/or changes to this document at any timeproblem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.Website:http:/www.novastar.te c h/1 Overview1OverviewC1, a console ’ s terminal videosuch as J series, is The C1 is designed with two LCD screens. The other, together with buttons on the layer position, input source,output under The C1 is also designed with a joystick adjust the size and position of layers. of layer transparency, finely PGM for Thanks to the cool lighted buttons, LCD screens, the C1 is extremely easy to conveAppearanceXi’NovaStar Tech Co., LtdXi’anNovaStarTechCo.,Ltd. 2 Features2F eatures●Support two LCD screens, one for monitoring,and the other touch screen for operating.During operating, users can view on one ofthe LCD screens the input source status, preview status and status of output on LEDdisplay, so that the overall situation is undercontrol.●Supports control of up to 16 terminal devices.●Supports control of NovaStar video splicing processors.●Supports screen mosaic, easy mosaic, output image quality adjustment, BKG settings, EDID settings, test patterns, and switching from normal display to blackout with one button press.●Supports up to 16 presets.●Supports preset copying, use of preset templates, preset customizing, saving of custom presets, preset data cleanup, lockup of preset area on C1 operation panel.●Supports up to 8 × layers, 1 × OSD, 1 × BKG, and 1 × LOGO.●Supports configurations of shape layers and layer mask.●Supports layer adding with one button press, layer cleanup with one button press, and moving a layer to the front or back with one button press.●Supports layer editing, layer image quality adjustment, layer border settings, and layer freezing.●Supports settings of the layer size and position through the joystick and buttons.●Supports Aux configuration.●Supports input source cropping.●Supports 13 layer transition effects and settings of transition duration.●Supports adjustment of the joystick’s sensitivity.●Supports manual adjustment of the fade transition effect of layers by using the TBar.●Supports remote or live control of terminal video processors through RJ45.4 Dimensions4DimensionsXi’anNovaStarTechCo.,Ltd.Unit:Xi’anNovaStarTechCo.,Ltd.5 Application5ApplicationXi’anNovaStarTechCo.,Ltd.。

诺瓦科技LED控制器MCTRL600规格书英文版

Specifications Independent Controller MCTRL600V2.1.0NS110100121Xi ’a n N ov a S t a r Te ch Co .,L t d .OverviewMCTRL600 is an advanced model of Nova controllers, which supports extra-large resolution. With HDMI/DVI video input and four Ethernet port outputs, a single unit is able to load 2560×960. Multiple units can be cascaded for uniform control.Feature1) HDMI/DVI input;2) HDMI/external audio input;3) 12bit/10bit/8bit HD video source;4) Resolution supported: 2048×1152，1920×1200，2560×960; 5) Resolution supported: 1440×900 (12bit/10bit);6) 1 light sensor interface; 7) Cascading supported;8) 18bit gray scale processing and presentation; 9) Video format: RGB, YCrCb4:2:2, YCrCb4:4:4;10) Standard 1U housing and independent power supply.Xi ’a nN ov aS t ar Te ch Co .,L t d .Appearanceduring authorization.INPUTS X i’a t a rT e ch C.Dimensions19" 1U Standard Cabinet.Unit: mmXi ’a nN ov aS t ar Te ch Co .,L t d .Specifications.FCC CautionAny Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.—Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Xi ’a nN ov aS t ar Te ch Co .,L t d .。

诺瓦科技WIFI-LED控制卡T2-4G规格书

诺瓦科技WIFI-LED控制卡T2-4G规格书Multimedia PlayersT2-4G Specifications Doc u ment Version:V1.3.2Doc u ment Number:NS120100339Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a trademark of Xi’an NovaStar Tech Co., Ltd.Statement i Table of ContentsTable of Contents Table of Contents (ii)1 Overview (1)1.1 Introduction ..................................................................................................................................................1 1.2Application (2)2 Features (3)2.1 Powerful Processing Capability (3)2.2 Omnidirectional Control Plan (3)2.3 Synchronous and AsynchronousDual-Mode (4)2.4 Wi-Fi AP Connection (4)2.5 4G Module (5)2.6 Remote Screen on/off Control (5)2.7 Connecting to PC Through USB (5)3 Hardware Structure (6)3.1 Appearance (6)3.2 Dimensions (8)4 Software Structure (9)4.1 System Software (9)4.2 Related Configuration Software (9)5 Product Specifications (10)6 Audio and Video Decoder Specifications (11)6.1 Image (11)6.1.1 Decoder (11)6.1.2 Encoder (11)6.2 Audio (12)6.2.1 Decoder ..................................................................................................................................................126.2.2 Encoder ..................................................................................................................................................126.3 Video (13)6.3.1 Decoder ..................................................................................................................................................136.3.2 Encoder ..................................................................................................................................................14ii1 Overview1 Overview 1.1 IntroductionTaurus series products are NovaStar'ssecond generation of multimedia playersdedicated to small and medium-sizedfull-color LED displays.FeaturesThe T2-4G of the Taurus series products(hereinafter referred to as “T2-4G”) hasthe following features:●Powerful processing capability●Omnidirectional control plan●Synchronous and asynchronousdual-mode●Wi-Fi AP connection●4G module●Remote screen on/off control●Capable of connecting to PC throughUSBIn addition to solution publishing andscreen control via PC, mobile phones andLAN, the omnidirectional control plan alsosupports remote centralized publishingand monitoring.Other Hardware FeaturesThe hardware of the T2-4G also has thefollowing features:●Loading capacity up to 650,000 pixels,with the maximum width of 1920 pixelsand maximum height of 1080 pixels●Wired Gigabit Ethernet●Stereo audio output●HDMI input and auto full-screen display●USB drive importing display●Onboard light sensor connectorallowing for automatic and scheduledbrightness adjustment1 Overview 1.2 ApplicationTaurus series products can be widelyused in LED commercial display field,such as bar screen, chain store screen,advertising machine, mirror screen, retailstore screen, door head screen, on boardscreen and the screen requiring no PC.Classification of Taurus’application cases is shown inTable 1-1. Table 1-1 ApplicationTaurus Series Multimedia PlayersT2-4G Specifications 2 Features2 Features 2.1 Powerful Processing CapabilityGHz four-core processor●Support for 1080P video hardwaredecoding● 1 GB operating memory●8 GB on-board internal storagespace with 4 GB available for users2.2 Omnidirectional Control PlanTable 2-1 Control PlanCluster control plan is a new internetcontrol plan featuring followingadvantages:●More efficient: Use the cloud servicemode to process services through auniform platform. For example, VNNOXis used to edit and publish solutions,and NovaiCare is used to centrallymonitor display status.●More reliable: Ensure the reliabilitybased on active and standby disasterrecovery mechanism and data backupmechanism of the server.●More safe: Ensure the system safetythrough channel encryption, datafingerprint and permissionmanagement.●Easier to use: VNNOX and NovaiCarecan be accessed through Web. As longas there is internet, operation can beperformed anytime and anywhere.●More effective: This mode is moresuitable for the commercial mode ofadvertising industry and digital signageindustry, and makes informationspreading more effective.2.3 Synchronous and AsynchronousDual-ModeThe T2-4G supports synchronous andasynchronous dual-mode, allowing moreapplication cases and being user-friendly.When internal video source is applied, theT2-4G is in asynchronous mode; whenHDMI-input video source is used, theT2-4G is in synchronous mode. Contentcan be scaled and displayed to fit thescreen size automatically in synchronousmode.Users can manually and timely switchbetween synchronous and asynchronousmodes, as well as set HDMI priority.2.4 Wi-Fi AP ConnectionThe T2-4G has permanent Wi-Fi AP. TheSSID is "AP + the last 8 digits of the SN",for example, "AP10000033", and thedefault password is "12345678". TheT2-4G requires no wiring and users canmanage the displays at any time byconnecting to the T2-4G via mobile phone,Pad or PC.T2-4G’s Wi-Fi AP signal strength is relatedto the transmit distance and environment.Users can change the Wi-Fi antenna asrequired.2.5 4G ModuleThe T2-4G is designed with 4G module.You can connect to the Internet via 4Gnetwork after turning on mobile datanetwork in the client software ViPlex.Wired network is prior to 4G network.When both of the networks are available,the T2-4G will choose signalsautomatically according to the priority.2.6 Remote Screen on/off ControlThe T2-4G can turn on or off screens in real timeor as scheduled through VNNOXand ViPlex.During hardware connection, the maximum input voltage of the delay is DC 24 V andthe maximum current is 3 A.2.7Connecting to PC Through USBThe T2-4G offers one USB Type B port allowing PC to be directly connected withoutrequiring other operations and you can configure screens, publish solutions , etc. byusing NovaLCT and ViPlex Express on Windows.3 Hardware Structure 3.1 Appearance4G 4G antenna portWiFi-AP Wi-Fi AP antenna portETHERNET Gigabit Ethernet portUSB 1 USB2.0 portHDMI IN HDMI1.4 inputSIM CARD SIM card slotSWITCH Button for switchingbetween synchronous andasynchronous modesNote: All product pictures shown in this document are for illustration purpose only.Actual product may vary.Table 3-1 Connectors and buttons of the T2-4Gwww.novastar.tech 19Note: All product pictures shown in this document are for illustration purpose only.Actual product may vary.Table 3-2 Indicators of the T2-4Gwww.novastar.tech 203.2 DimensionsThe total thickness (board thickness +thickness of the components on the frontand back side) is no greater than 20.7 mm.Unit of the dimension chart is “mm”.Ground connection is enabled for locationhole (GND).www.novastar.tech 214 Software Structure4 Software Structure 4.1 System Softwarewww.novastar.tech 22www.novastar.tech 23ing system software ● Android terminal applicationsoftware ● FPGA programNote: The third-party applications are not supported.4.2 Related Configuration SoftwareTable 4-1 Related configuration software5 Product Specifications5 Product Specificationswww.novastar.tech 24www.novastar.tech 25Wi-Fi AntennaSpecifications6.1Image6.1.1Decoder6www.novastar.tech 26www.novastar.tech 276.2 Audiowww.novastar.tech 28www.novastar.tech 29www.novastar.tech 306.3.1 Decoderwww.novastar.tech 31www.novastar.tech 32www.novastar.tech 33www.novastar.tech 34Audio and Video Decoder Specificationsand YUV400(monochrome) is also supported for H.264.。

诺瓦科技LED光电转换器FE600快速使用指南英文版

Fiber converter FE600 allows signal conversion between optical fiber and twisted pair.I: OPT in, Ethernet outII: Ethernet In, OPT Out123All intellectual properties involved in this document belong toXi ’an NovaStar Tech Co., Ltd. All rights reserved.Fiber Convert FE600Document Number: NS160110457Document Version: V1.0.0Quick Start Guide Signals are accessed into FE600 via OPT ports and transmitted to the LED display via Ethernet ports. Signals are accessed via Ethernet ports into one FE600 unit which is connected to another FE600 unit via OPT ports. Then signals can be transmitted to the LED display via Ethernet ports of the latter unit (allowing to load LED displays remotely).Two types of power connectors: 3-Pin power connector and PowerCON, satisfying different needs of users.Note : When any of the power connectors is connected, the unit can work.3-Pin power connector PowerCON FE600Connectors:① 16 Neutrik Gigabit Ethernet ports: 1-16② 4 OPT fiber ports: OPT1-OPT4OPT1 is corresponding to Ethernet port 1-8.OPT2 is corresponding to Ethernet port 9-16.OPT3 serves as the backup of OPT1.OPT4 serves as the backup of OPT2.③ Control connectors: ETHERNET and USB④ Power connectors: 3-Pin connector and PowerCONProgram control connectors: ETHERNET or USB, connected to the control computer to update programs.3Front panel indicators:4I ndicator 1-16 denote the transmission status of the corresponding Ethernet ports.Indicators on section A and C denote whetherthe connection of the corresponding ports areavailable.Indicators on section B and D denote whetherthe data transmission of the corresponding portsis available.PWR: Power indicatorSTAT: Device status indicatorNote: The small triangle next to OPT denote whether theconnection of the corresponding OPT ports are available.CAUTION for maintenance staff:DOUBLE POLE/NEUTRAL FUSING。

诺瓦科技LED透明屏接收卡MRV500详细参数说明书英语版

Product images provided in this file are for reference only , and the actual products shall prevail.Rev1.1.1 NS110100113SpecificationReceiving Card MRV500OverviewMRV500 is the EMC version of MRV300 with effective reduction of theelectromagnetic radiation of the whole system.Features1)Single card outputs 16-group of RGBR 'data;2)Single card outputs 20-group of RGB data;3)Single card outputs 64-group of serial data;4)Single card support resolution 256x226;5)Configuration file readback;6)Temperature monitoring;7)Ethernet cable communication status detection;8)Power supply voltage detection;9)Pixel-by-pixel brightness and chromaticity calibration. Brightnessand chromaticity calibration coefficients for each LED;10)Pre-store picture setting;11)Comply with EU CE-EMC Class B standard;12)Comply with RoHS standard.Output Interface DefinitionUnder all the three different working modes of it, two 50P interfaces can o u t p u tdifferent data, and only one common program and software are required. No customized program is needed. Interfaces are defined as follows:Virtual R signal in the last data group of each 50pin hub is decoding signal E at 1/32 scan mode.1) 16- g roup data mode Support i ng 16-group of RGBR 'parallel data, defined as follows:2)20-g roup parallel data modeSupport i ng 20 sets of parallel data, defined as follows:one LED bar independently.In case of horizontal LED bar, the default is that Data1 drives the first row from the top and Data64 drives the 64th row. (front view).In case of vertical LED bar, the default is that Data1 drives the first column of from the left and Data64 drives the 64th column. (front view).DimensionsThickness of the board is about 1.6mm. The overall thickness (boardthickness＋thickness of the components on front and back side) isabout 18.5mm.Unit: mm.AppearanceNote: Product images provided in this file are for reference only, and the actual products shall prevail.J9 definition （ I ndicator Light Socket ）SpecificationsSpecific Model ListTo meet the needs of different customers, Nova has provided morespecific models of the products, including standard products in stock.Oels need to be customized.Appendix Serial data decoding circuit： Page 10。

诺瓦科技LED监控卡MON300规格书英文版

8) Cabinet door open/close status detection supported;
9) Monitoring card HUB is required for LED status inspection or flat
cable detection.
www.novastar.tech
1) 16-group data mode
西安诺瓦电子科技有限公司
www.novastar.tech
Page 4
西安诺瓦电子科技有限公司
2) 20-group data mode
www.novastar.tech
Page 5
西安诺瓦电子科技有限公司
www.novastar.tech
Page 6
Connection 西安诺瓦电子科技有限公司
0.12
0.15
0.20
Working environment temperature (℃)
-20℃~60℃
Working environment humidity (%)
0%~95%
Environment
Notice: When working
-20℃~60℃
temperature
temperature of the
西安S诺p瓦电e子c科i技f有ic限a公t司ions Monitoring Card MON300
Product images provided in this file are for reference only, and the actual products shall prevail.
Rev2.1.0 NS110100129
supply output

诺瓦科技LED显示屏联网播放器系列应用方案描述英文版

Taurus SeriesMultimedia PlayersApplication SolutionProduct Version: V1.3.0Document Number:NS120100268X I 'A N N O V A S T A R TE C H C O .,L T D .Copyright © 2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an Nova Star Tech Co., Ltd.Trademarkis a trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. If you experience any problems in use or have any suggestions, please contact us via contact info given in document. We will do our best to solve any issues, as well as evaluate and implement any suggestions.X I'A NN OV AS TA RT EC HC O.,L TD.Application Solution Table of ContentsTable of ContentsTable of Contents (ii)1 Overview (1)1.1 About This Solution (1)1.2 Characteristics of the Application Solution (1)1.2.1 Synchronous Playing (1)1.2.2 Smart Brightness Adjustment ................................................................................................................... 2 1.2.3 4G Module ................................................................................................................................................ 2 1.2.4 Cluster Management ................................................................................................................................ 3 1.3 Software Acquiring Method ......................................................................................................................... 3 2 AD Player and Mirror Screen Solution ..................................................................................... 5 2.1 Overview ...................................................................................................................................................... 5 2.2 Single Application ........................................................................................................................................ 7 2.2.1 Networking Diagram ................................................................................................................................. 7 2.2.2 Required Software .................................................................................................................................... 7 2.2.3 Relevant Configurations ........................................................................................................................... 7 2.3 Cluster Application ....................................................................................................................................... 8 2.3.1 Networking Diagram ................................................................................................................................. 8 2.3.2 Required Software .................................................................................................................................... 8 2.3.3 Required Hardware Devices (8)2.3.4 Relevant Configurations (9)2.4 Splicing (12)2.4.1 Networking Diagram (12)2.4.2 Required Software (13)2.4.3 Relevant Configuration ........................................................................................................................... 13 3 Post Screen Solution . (16)3.1 Overview (16)3.2 Networking Diagram (18)3.3 Required Software (18)3.4 Required Hardware Devices (18)3.5 Relevant Configuration .............................................................................................................................. 19 X I 'A N N O V A S T A R T E C H C O .,L T D.Application Solution Table of Contents4 General Operations (23)4.1 Taurus Login upon ViPlex Handy (Android and iOS) (23)4.2 Taurus Login upon ViPlex Express (Windows) (24)X I'A NN OV AS TA RT EC HC O.,L TD.Application Solution 1 Overview1 Overview1.1 About This Solution Taurus series products are the second-generation multimedia players developed by NovaStar specially designed for the medium-small size LED full color displays, and applicable to all kinds of display devices as well as many application scenes.AD player, mirror screen and post screen are used here as examples to describe the application solution of Taurus series products. Pictures of Taurus series products used in networking diagram are taken from T6 model.For more information of Taurus series products, please visit www.novastar.tech to download relevant documents.1.2 Characteristics of the Application Solution 1.2.1 Synchronous Playing This function makes several displays play the same image at the same time with high accuracy based on advanced synchronous playing and scheduling technologies. The synchronous playing function could be enabled for different displays as long as following three requirements are met: ● The synchronous playing function has been enabled on the ViPlex or VNNOX. ●The time of multiple Taurus products are synchronized. ● Playing plans of multiple T aurus products are the same without random transitionor media.Advantages of the synchronous playing function are shown in Table 1-1.Table 1-1 Synchronous playingTime could be synchronized through NTP and RF modes from which the user could select one as required:X I 'A N N O V A S T A R T E C H C O .,L T D .● NTP time synchronization: Taurus time synchronization is based on NTP server.No hardware is required to be added, and time synchronization accuracydepends on network speed. Consequently, network traffic will be consumed by using 4G network.●RF time synchronization: Master and slave devices are required to be set for Taurus. Time of the slave device is synchronized with that of the master device through RF network, and therefore RF device is required. This timesynchronization method is applicable to events with high time synchronization requirement and does not consume network traffic, but its signal receivingdepends on the environment and is limited by distance. 1.2.2 Smart Brightness AdjustmentSmart brightness adjustment includes auto brightness adjustment and timing brightness adjustment.●Auto brightness adjustment: Display brightness will automatically adjust according to environment brightness.● Timing brightness adjustment: Display brightness will automatically adjust to a specific value at a given point of time. Taurus products have brightness sensor connectors. Connect the light sensor and set smart brightness adjustment rules on ViPlex to enable the smart brightness adjustment function. Advantages of smart brightness adjustment are as shown in Table 1-2. Table 1-2 Smart brightness adjustmentTaurus products support manual brightness adjustment as well. 1.2.3 4G Module 4G module can be installed on the Taurus series products. To connect the Taurus to the Internet via 4G network, buy the corresponding 4G module and install it according to the country or region of the service provider.The Taurus can be connected to the Internet through the following three methods listed from the highest to the lowest priority:●Wired network ●Wi-Fi Sta ● 4G networkWhen the three methods are all enabled, the Taurus will select signals automatically according to the priorities.T E C H C O .,L T D .When mobile data network is enabled on ViPlex and priority requirements for signal selection are met, Taurus products with 4G module could connect to Internet. Advantages of 4G module are as shown in Table 1-3.Table 1-3 4G module1.2.4 Cluster ManagementDisplay quantity increases fast following with the development of smart city and commercial application, and cluster solution of NovaStar emerges to uniformly manage and monitor numerous displays in different places.●VNNOX: A cloud publishing service used to realize display remote content management and remote terminal control. ● NovaiCare: A cloud monitoring service used to realize display remote monitoring. VNNOX and NovaiCare could be accessed to remotely and uniformly manage displays with PC, Pad or mobile phone as long as Internet is available. Advantages of cluster management are as shown in Table 1-4. Table 1-4 Cluster management1.3 Software Acquiring MethodTable 1-5 Software acquiring methodsA S T A R T E C H C O .,L T D .X I'A NN OV AS TA RT EC HApplication Solution 2 AD Player and Mirror Screen Solution2AD Player and Mirror Screen Solution2.1 Overview AD player and mirror screen, the typical commercial display applications, are mainly used for information publishing and advertisement display, and can be placed at the shopping mall, hotel, office building, exhibition, bank, station and community. There are two application modes for the mirror screen which is a mirror when the display is turned off. There are many application modes for the AD player and mirror screen, and only typical applications are introduced in this chapter, including the single application, cluster application and splicing application. Characteristics of the AD player and mirror screen of NovaStar are as shown in Table 2-1. Table 2-1 AD player and mirror screenT A R T E C H C O .,L T D.Application Solution 2 AD Player and Mirror Screen SolutionX I'A NN OV AS TA RT EC HC O.,L TD.2.2 Single Application2.2.1 Networking DiagramTaurus products provide Wi-Fi AP itself. After connecting to Wi-Fi AP with PC, Pad and mobile phone, enter the username and password to log in to the Taurus. 2.2.2 Required Software ● ViPlex Handy●ViPlex Express 2.2.3 Relevant Configurations No need to set. Refer to 4 General Operations for specific operations to connect and log in to the Taurus products. XI 'A N N O V A S T A R T E C HCO .,L T D.2.3 Cluster Application2.3.1 Networking DiagramVNNOX and NovaiCare could be accessed directly or by way of bridge connection. When bridge connection is selected, following three methods for Internet connection of Taurus products are available with priorities ranging from high to low: ● Wired network ● Wi-Fi Sta● 4G network When the three methods are all enabled, Taurus products will select signals automatically according to the priorities. 2.3.2 Required Software ● ViPlex Handy ● ViPlex Express ● VNNOX ●NovaiCare2.3.3 Required Hardware DevicesXI 'A N N O V A S T A R T E C HCO .,L T D.2.3.4 Relevant ConfigurationsBefore You Begin● The login username and password for VNNOX, NovaiCare and NovaLCT are acquired.● Create solution(s) on VNNOX without random transition and random media of the solution(s).● Create asynchronous players on VNNOX and associate the players with the License.●Configurations required before monitoring have been done on NovaLCT and NovaiCare.Refer to software online help for specific operations of VNNOX, NovaiCare and NovaLCT.Acquiring Player Authentication InformationThe authentication information is required when you bind asynchronous players on VNNOX to the Taurus through ViPlex.Step 1 Visit and log in to VNNOX Lite or VNNOX Pro .Step 2 Perform the following operations to view the correct authentication information.● VNNOX Lite: Choose > Account . ●VNNOX Pro: Choose > Organization Management > System Management and select the Player Authentication tab.Configuring ViPlex Handy (Android and iOS) Step 1 Log in to the Taurus. Refer to 4.1 Taurus Login upon ViPlex Handy (Android and iOS). Step 2 Click screen name to enter Screen management page. Step 3 Set rules for smart brightness adjustment. 1. Select Screen Settings > Brightness Control . 2. Click Brightness Mode, select Smart , and click OK . 3. Click Smart Brightness Adjustment Parameters . 4. Click Edit . 5. Click to set rules for timed brightness adjustment. Then click OK . 6. Clickto set rules for auto brightness adjustment. Then click OK .7. Click Auto adjustment parameters to set the corresponding relation between ambient brightness and screen brightness. 8. Click OK .Step 4 Set the connection method between the Internet and Taurus.Priorities of wired network, Wi-Fi Sta and 4G network range from high to low. When the three methods are all enabled, the Taurus will select signals automatically according to the priorities.XI'A NN O VA S T A R T E C HCO .,L T D.●Wired network: When static IP address is required, select Network Settings > Wired Network Setting , turn DHCP off, enter the static IP address of the Taurus, and click OK .● Wi-Fi Sta: Select Network Settings > Wi-Fi Setting , and turn WiFi on. Click the Wi-Fi name of the external router and enter the Wi-Fi password, and click OK . ●4G network: Select Network Settings > Mobile Data Setting , and turn Mobile Data on.Step 5 Bind the asynchronous player.1. Select Remote Management > VNNOX .2. Set the VNNOX server and player authentication information.3. Click Obtain and select a player from the drop-down box of Player .4. Click OK after setting.Step 6 If display remote monitoring is required, perform the following procedures. Otherwise,ignore this step.1. Select Remote Management > NovaiCare .2. Turn NovaiCare on.3. Select the service node of the NovaiCare from the drop-down box of Server .4. Click the right side of Possessor line.5. Enter the username for login NovaiCare in the pop-up dialog box, and click OK .6. Click OK after setting.Step 7 Repeat above steps to configure other Taurus products in cluster till all Taurus products have been configured. Configuring ViPlex Express (Windows)Step 1 Log in Taurus and see detailed operations in 4.2 Taurus Login upon ViPlex Express (Windows).Step 2 Select Screen Control. Step 3 Set rules for smart brightness adjustment. 1. Select Brightness adjustment . 2. Select the target terminal in the terminal list.3. Clickon the Smart page.4. Set rules for timed brightness adjustment and click Add .5. Set rules for auto brightness adjustment and click Add .6. Click Cancel .7. Click Apply .Step 4 Set the way to connect Taurus to the Internet.The priority of wired network, Wi-Fi Sta and 4G network is from high to low. If all of thethree ways are enabled, the Taurus will choose signal automatically according to the priority order.1. Select Network configuration .XI 'A N N O V A S T A R T E C HCO .,L T D.2. Select the target terminal in the terminal list and perform the following operationsaccording to actual needs.−Wired network: If it is required to set static IP address, deselect Dynamic DHCP , enter the IP address information of the Taurus and then click Apply in the Wired network configuration section.− Wi-Fi Sta: Turn on Wi-Fi in the Wi-Fi configuration section. Click the Wi-Fi name of external router and then enter Wi-Fi password and click OK . −4G network: In the Mobile network configuration area, turn on mobile network.Step 5 Bind asynchronous players.1. Select Server configuration .2. Select the target terminal in the terminal list.3. In Configure parameters for connecting screens to VNNOX , configureVNNOX server and player authentication information. 4. Clicknext to Player and select a player.5. Click Bind .Step 6 If you want to monitor displays remotely, please perform this step; otherwise, skip thisstep.1. In Configure parameters for connecting screens to NovaiCare , configure NovaiCare server and login user name.2. Click Send . Step 7 Repeat above steps until all the Taurus products in the cluster are configured. Configuring VNNOXWhen setting timing rules and synchronous playing upon ViPlex, every Taurus product is required to be set individually, and batch setting is available for setting timing rules and synchronous playing upon VNNOX. When the public network isavailable, VNNOX is recommended for batch configuration to reduce manual operations. Step 1 Visit and log in to VNNOX Pro.Step 2 Set time synchronization rule.1. Select> Players Management > Time Synchronization .2. Click NTP server configuration.3. Configure NTP service information, and then click Save&Close .4. Click New on the page of time synchronization task list.5. Enter time synchronization task name and select time synchronization method,and then click Next .− NTP: Select a NTP server and then click OK .−RF: Select a time synchronization standard device and then click OK . 6. Click Add in the Players tab of the time synchronization task attribute page.−NTP time synchronization: Select all the players in cluster and then click OK .X I 'A N N O V A S T A R T E C HCO .,L T D.−RF time synchronization: Select all the slave players in RF network and then click OK .7. When the time synchronization method upon RF network is selected, and NTPserver is used for the time synchronization standard device, click Configure tab to set NTP to Yes , and select NTP server. Otherwise, ignore this step. 8. Click Save or Save&Close . Players added in the time synchronization task willperform time synchronization according to rules defined in the task.Step 3 If the same image is required to be played by different screens, perform the followingprocedures. Otherwise, ignore this step.1. Select> Players Management > Players .2. Select asynchronous players corresponding to all Taurus series productsrequiring enabling the synchronous playing function. 3. Click Real-time control and select Turn on sync play from the drop-down box.Step 4 Associate with solution(s).1. Select> Players Management > Players .2. Select a player and click Attribute , or click a player name.3. Select a solution from the drop-down box of parameter associate solution .4. Whether solution distribution type is Manual.− Yes. Click Save&Close to return to the player list page. Perform term 5. −No. Click Save or Save&Close . VNNOX will automatically distribute solutions to corresponding Taurus products.5. Select the target player, and click Update solution to manually distributesolutions to corresponding Taurus products. 6. Repeat above steps to associate with solutions for other players in cluster till all players have been configured. 2.4 Splicing 2.4.1 Networking DiagramThe following figure uses three displays splicing as an example to illustrate Taurus connection.X I 'A NNO VA S T A R T E C HCO .,L T D.The Taurus product provides Wi-Fi AP itself. Connect to Wi-Fi AP of each Taurus product through PC, Pad and mobile phone, and then enter the username and password to log in to the Taurus.2.4.2 Required Software● ViPlex Handy●ViPlex Express2.4.3 Relevant Configuration2.4.3.1 Configuring the first display Configuring ViPlex Handy (Android and iOS)Step 1 Log in to the Taurus of the first display. Refer to 4.1 Taurus Login upon ViPlex Handy(Android and iOS) for specific operations. Step 2 Click screen name to enter the Screen management page. Step 3 Select Video Control. Step 4 Click Edit .Step 5 Configure the required parameters.● Mode : Manual ● Source : Inside ● Offset X : 0 ●Offset Y : 0XI 'A N NOVA S TA R T E C HCO .,L T D.Step 6 Click OK .Configuring ViPlex Express (Windows)Step 1 Log in Taurus and see detailed operations in 4.2 Taurus Login upon ViPlex Express(Windows). Step 2 Select Video source.Step 3 Select the target terminal in the terminal list.Step 4 On the Manual page, configure all required parameters.● Video source type : Internal ● X : 0 ●Y : 0Step 5 Click Apply .2.4.3.2 Configuring other displaysConfiguring ViPlex Handy (Android and iOS)Step 1 Log in to the Taurus of the second display. Refer to 4.1 Taurus Login upon ViPlexHandy (Android and iOS) for specific operations. Step 2 Click screen name to enter Screen management page. Step 3 Select Video Control. Step 4 Click Edit .Step 5 Configure the required parameters.Horizontal splicing image is taken as an example here for illustration. In the event of vertical splicing, the way for setting Offset Y is the same as that for setting Offset X .● Mode : Manual ● Source : HDMI●Offset X: (The display serial number – 1) x The Image width . For example, when the image width is 500px, it is required to be set as 500px for the second display and 1000px for the third display. ●Offset Y : 0Step 6 Click OK .Step 7 Repeat above steps to configure other Taurus products till all Taurus products havebeen configured.Configuring ViPlex Express (Windows)Step 1 Log in Taurus and see detailed operations in 4.2 Taurus Login upon ViPlex Express(Windows). Step 2 Select Video source.Step 3 Select the target terminal in the terminal list.XI 'AN NOVA S TAR T E C HCO .,L T D.Step 4 On the Manual page, configure all required parameters.Horizontal splicing image is taken as an example here for illustration. In the event ofvertical splicing, the way for setting Y is the same as that for setting X.●Video source type: HDMI●X: (The display serial number– 1) x The Image width. For example, when theimage width is 500px, it is required to be set as 500px for the second display and1000px for the third display.●Y: 0Step 5 Click Apply.Step 6 Repeat above steps to configure other Taurus products till all Taurus products have been configured.X I'A NN OV AS TA RT EC HC O.,L TD.Application Solution3 Post Screen Solution3Post Screen Solution3.1 OverviewPost screens prevail on both sides of highways and roads following with thedevelopment of the smart city. Smart post screen has distinct advantages compared with the conventional post which features illumination and static advertisement only and requires new manufacture and installation in case of advertisement replacement, while the smart post provides functions including illumination, security monitoring, environment monitoring, emergency call, charging pile and LED display which used high-definition smart LED post screen for road leading, data release and advertising promotion.Post screens can be used without quantity limits, and the display contents can be controlled individually or in batch based on cluster management method. Characteristics of the post screen of NovaStar are as shown in Table 3-1. Table 3-1 Post screenR T E C H C O .,L T D.N O V A S TX I' A N3.2 Networking DiagramVNNOX and NovaiCare could be accessed directly or by way of bridge connection to centrally manage post screens.Taurus products can connect to Internet through the wired network, Wi-Fi and 4G network which is recommended for this solution.3.3 Required Software● ViPlex Handy● ViPlex Express● VNNOX●NovaiCare 3.4 Required Hardware DevicesXI 'A N NOVA S TAR T E C HCO .,L T D.3.5 Relevant ConfigurationBefore You Begin● Acquire the login username and password of VNNOX, NovaiCare and NovaLCT. ● Create a solution on the VNNOX without random transition and random media. ● Create an asynchronous player which associates with License on the VNNOX. ●Complete configurations required to be done before monitor on NovaLCT and NovaiCare.Refer to software online help for specific operations of VNNOX, NovaiCare and NovaLCT.Acquiring player Authentication InformationThe authentication information is required when you bind asynchronous players on VNNOX to the Taurus through ViPlex.Step 1 Visit and log in to VNNOX Lite or VNNOX Pro.Step 2 Perform the following operations to view the correct authentication information.●VNNOX Lite: Choose > Account .●VNNOX Pro: Choose > Organization Management > SystemManagement and select the Player Authentication tab.Configuring ViPlex Handy (Android and iOS) Step 1 Log in to the Taurus. Refer to 4.1 Taurus Login upon ViPlex Handy (Android and iOS) for specific operations. Step 2 Click the screen name to enter the Screen management page. Step 3 Set rules for smart brightness adjustment. 1. Select Screen Settings > Brightness Control . 2. Click Brightness Mode to select Smart , and then click OK .3. Click Smart Brightness Adjustment Parameters .4. Click Edit .5. Click to set rules for timed brightness adjustment. Then click OK .6. Clickto set rules for auto brightness adjustment. Then click OK .7. Click Auto adjustment parameters to set the corresponding relation betweenambient brightness and screen brightness. Then click OK . 8. Click OK .Step 4 Set Internet connection mode for the Taurus.1. Select Network Settings > Mobile Data Setting .2. Turn Mobile Data on.Step 5 Bind the asynchronous player.1. Select Remote Management > VNNOX .X I 'A N N OV A S T A R T E C HCO .,L T D.2. Set the VNNOX server and player authentication information.3. Click Obtain and select a player from the dropdown box of Player .4. Click OK after setting.Step 6 If display remote monitoring is required, perform the following procedures. Otherwise,ignore this step.1. Select Remote Management > NovaiCare .2. Turn NovaiCare on.3. Select the service node of NovaiCare from the dropdown box of Server .4. Click the right side of Possessor line.5. Enter the login username of NovaiCare in the pop-up dialog box, and click OK .6. Click OK after setting.Step 7 Repeat above steps to configure other Taurus products in cluster till all Taurusproducts have been configured.Configuring ViPlex Express (Windows)Step 1 Log in Taurus and see detailed operations in 4.2 Taurus Login upon ViPlex Express(Windows).Step 2 Select Screen Control. Step 3 Set rules for smart brightness adjustment. 1. Select Brightness adjustment . 2. Select the target terminal in the terminal list.3. Click on the Smart page.4. Set rules for timed brightness adjustment and click Add .5. Set rules for auto brightness adjustment and click Add .6. Click Cancel .7. Click Apply . Step 4 Set the way to connect Taurus to the Internet. 1. Select Network configuration .2. Select the target terminal in the terminal list.3. In the Mobile network configuration area, turn on mobile network.Step 5 Bind asynchronous players.1. Select Server configuration .2. Select the target terminal in the terminal list.3. In Configure parameters for connecting screens to VNNOX , configureVNNOX server and player authentication information. 4. Clicknext to Player and select a player.5. Click Bind .Step 6 If you want to monitor displays remotely, please perform this step; otherwise, skip thisstep.XI 'A N N O V A S T A R T E C H C O .,L T D.。

诺瓦科技LED同步控制系统MCTRL1600规格书英文版

保留一切权利。

非经本公司书面许可，任何单位和个人不得擅自摘抄、复制本文档内容的部分或全部，并不得以任何形式传播。

商标声明是诺瓦科技的注册商标。

声明欢迎您选用西安诺瓦电子科技有限公司（以下简称诺瓦科技）的产品，如果本文档为您了解和使用产品带来帮助和便利，我们深感欣慰。

我们在编写文档时力求精确可靠，随时可能对内容进行修改或变更，恕不另行通知。

如果您在使用中遇到任何问题，或者有好的建议，请按照文档提供的联系方式联系我们。

对您在使用中遇到的问题，我们会尽力给予支持，对您提出的建议，我们衷心感谢并会尽快评估采纳。

西安诺瓦电子科技有限公司规格书更新记录更新记录西安诺瓦电子科技有规格书目录目录更新记录 (ii)1 安全说明 (1)1.1 存储和运输安全 (1)1.2 安装和使用安全 (1)2 概述 (3)3 功能特性 (4)4 外观说明 (5)5 尺寸图 (8)6 产品规格 (9)西安诺瓦电子科技有限公司1安全说明本章描述独立主控MCTRL1600的安全说明，目的是保证产品的存储、运输、安装和使用安全。

安全说明适用于所有接触和使用产品的人员。

首先请注意以下几点：● 请阅读所有说明。

● 请保留所有说明。

●请遵循所有说明。

1.1 存储和运输安全● 请注意防尘防水。

● 请避免阳光长时间直射。

● 请勿靠近热源和火源。

● 请勿放置在易爆气体环境中。

●请勿放置在强电磁环境中。

●请将产品放在稳固的位置，以防坠落造成产品损坏或人身伤害。

●请保存包装箱和包装材料。

存储和运输产品时可以使用。

为了最大程度地保护设备，请将产品按照出厂时的原始包装重新包好。

1.2 安装和使用安全● 只有通过培训的专业人员才可以安装产品。

● 禁止带电插拔。

● 请确保设备安全接地。

诺瓦科技全彩LED接收卡MRV200规格书英文版

Product images provided in this file are for reference only , and the actual products shall prevail.Rev2.1.1 NS110100089SpecificationsReceiving Card MRV200OverviewNova M3 MRV200 is the mini-version of Nova M3 receiving card. It hassmall size and powerful functions. It retains all the functions andfeatures of MRV300 receiving card and is more suitable to LED curtainand die-cast aluminum cabinet.Features1)Single card outputs 16-group of RGBR 'data;2)Single card outputs 20-group of RGB data;3)Single card outputs 64-group of serial data;4)Single card supported resolution 256x226;5)Configuration file readback;6)Temperature monitoring.7)Ethernet cable communication status detection;8)Power supply voltage detection;9)Pixel-by-pixel brightness and chromaticity calibration. Brightness andchromaticity calibration coefficients for each LED;10)Pre-store picture setting; 11)Comply with EU RoHs standard;12)Comply with EU CE-EMC standard.Output Interface DefinitionUnder all the three different working modes of it, three 26P interfaces ca n o u t p u t d i f f erent data, and only one common program and software is required. No customized program is necessary. Interfaces are defined as follows:1) 16- g roup data mode （ W ith virtual output ）Support i ng 16-group of RGBR 'parallel data, defined as follows:Virtual red signal of the eighth group of data is exported as E signal of decoded signal under32-scanning working mode.group serial data B17 14 G18 16 R19 18 B19 20 G20 22 NC 24 GND 26modeUnder serial mode, there are 64 data cables totally. Each cable can drive one LED bar independently.In case of horizontal LED bar, the default is, Data1 drives the first row from the top, and Data64 drives the 64th row. (front view)case ofdefault is,drives of from the left, and Data64 drives the 64th column. (front view).4)Special interface for light series or color screenUnit: mm.To meet the needs of different customers, Nova provides more specificmodels of the products, including standard products in stock. Othermodels need to be customized.AppendixSerial data decoding circuit ： Page 10。

诺瓦科技LED显示屏接收卡A8s产品说明书英文版

A8sReceiving CardProduct DescriptionDocument Version: V1.1.0Document Number: NS110100423XI 'AN N OVA S T AR T EC HCO .,L T D.Copyright ©2018 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a trademark of Xi’an NovaStar T ech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice. Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,LT D.Product Description Change HistoryChange HistoryX I'A NN OV AS TA RTProduct Description1 SafetyContents1 Safety (1)1.1 Storage and Transport Safety ...................................................................................................................... 1 1.2 Installation and Use Safety .. (1)2 Overview ......................................................................................................................................... 2 3 Characteristics .. (4)3.1 Improvement in Display Effect ..................................................................................................................... 4 3.2 Improvement in Maintainability .................................................................................................................... 5 3.3 Improvement in Hardware Reliability ........................................................................................................... 6 3.4 Improvement in Software Reliability (6)4 Hardware Structure (7)4.1 Appearance .................................................................................................................................................. 7 4.2 Dimensions .................................................................................................................................................. 7 4.3 Indicator ....................................................................................................................................................... 8 4.4 Definition of the Data Interface (Top) ........................................................................................................... 9 4.4.1 32-Group Parallel Data Interface .............................................................................................................. 9 4.4.2 64-Group Serial Data Interface ............................................................................................................... 12 4.4.3 Reference Design for Expandable Interfaces .. (15)5 Software Structure ...................................................................................................................... 17 6 Typical Networking .................................................................................................................... 18 7 Specifications ............................................................................................................................... 19 A Acronyms and Abbreviations .................................................................................................. 20 B Terms .. (21)XI 'AN NOVA S T AR T EC HCO .,L T D.1SafetyThis chapter illustrates the safety of the A8s receiving card to ensure products’storage, transport, packing and application safety. Safety description is applicable to all personnel that contact or use the products. Pay attention to following points:● Read throughout the description. ● Save the whole description.●Be complied with the whole description.1.1 Storage and Transport Safety● Pay attention to dust and water prevention. ● Avoid long-term direct sunlight.● Do not place the products at the position near fire and heat. ● Do not place the products in an area containing explosive materials. ● Do not place the products in strong electromagnetic environment.● Place the products at a stable position to prevent damage or personal injury caused by dropping.●Save the packing box and materials which will come in handy if you ever have to ship your products. For maximum protection, repack your product as it was originally packed at the factory.1.2 Installation and Use Safety● Only trained professionals may install the products.● Do not insert and unplug (power cord plug) when the power is on. ● Ensure the safe grounding of the device.● Always wear an anti-static wrist band and insulating gloves. ● Do not place the products in an area having more or strong shake. ● Perform dust removing regularly.● Do not maintain the products without authorization but contact NovaStar as soonas possible.●Replace spare parts only with the same parts supplied by NovaStar.XI 'AN N OVA S T AR T EC HCO .,L T D.2OverviewA8s is a high-end receiving card developed by NovaStar, featuring small size andlarge loading capacity with the single card loading capacity up to 512×256 (PWM IC) pixels.A8s can work with the independent controller MCTRL R5, making display rotate at any angel. A8s can also work with the independent controller MCTRL4K featuring large loading capacity and support HDR10 compliant video input, realizing larger dynamic brightness range and larger color space, and making the image smoother.A8s supports pixel level brightness and chroma calibration, which removes color difference effectively and improves display consistency of LED images. In addition, it also supports image rotation in 90° increments, creating richer images and improving visual experiences.Software and hardware designs of the A8s concern the user deployment as well as operating and maintenance scenarios, enabling easier deployment, more stable operating and more efficient maintenance. Advanced hardware design:● Small size and thinner thickness save space for increasingly narrower cabinetspace and smaller spacing between lamps.●Use high-density connector which is resistant to dust and vibration and features high stability and high reliability.● Assembly network transformer features simple design and improved magnetic compatibility, helping user’s products to successfully pass the EMC authentication.Useful software design:● Support for HDR10● Support for LVDS transmission (customized function) ● Support for low latency (customized function) ● Support for smart module (customized function) ● Support for auto module calibration ● Support for Mapping function ● Support for 18Bit+ grayscale output ● Support for ClearView● Support for image rotation in 90° increments●Support for pre-stored image setting of the receiving cardXI 'AN N OVA S T AR T E C HCO .,L T D.Product Description 2 Overview●Support for module Flash management●Support for monitoring of temperature, power supply voltage●Support for monitoring of Ethernet cable communication status (customizedfunction)●Support for 5-pin LCD moduleX I'A NN OV AS TA RT EC HC O.,LT D.Product Description3 Characteristics3Characteristics3.1 Improvement in Display EffectXI 'AD.3.2 Improvement in MaintainabilityAX I'3.3 Improvement in Hardware Reliability3.4 Improvement in Software ReliabilityXI 'AO4Hardware Structure4.1 AppearanceProduct images provided in this file are for reference only , and the actual products shall prevail.Models of the high-density receptacle and plug used by A8s are shown in Table 4-1.Table 4-1 Model of high-density connector4.2 DimensionsBoard thickness is not greater than 2.0mm, and the total thickness (board thickness + thickness of both front panel and back panel) is not greater than 7.5mm.Unit of the dimension chart is “mm”. Ground connection is enabled for location hole (GND).XI 'AA S T AR T EC HCO .,L T D.4.3 IndicatorXI 'A.,L T D.4.4 Definition of the Data Interface (Top)4.4.1 32-Group Parallel Data InterfaceI 'AN N OVA S T AR T EC HCO .,L T D.Note 1. Voltage ranging from 3.3V to 5.5V is recommended for input power (VCC).Note 2. RGB data groups must be used in group.Note 3. Operating indicator that meets low level is valid.Note 4. OE_RED, OE_GREEN and OE_BLUE are display enabled pins. In case thatOE_RGB are not controlled separately, OE_RED signal is applied. WhenPWM chip is used, GCLK signal is enabled.Note 5. RFU1–18 are the reserved extended function interfaces. Please refer to“4.4.3 Reference Design for Expandable Interfaces”.4.4.2 64-Group Serial Data InterfaceX I'A NN OV AS TA RT EC HC O.,LT D.Note 6. Voltage ranging from 3.3V to 5.5V is recommended for input power (VCC). Note 7. Operating indicator that meets low level is valid.Note 8. OE_RED, OE_GREEN and OE_BLUE are display enabled pins. In case thatOE_RGB are not controlled separately, OE_RED is applied. While PWM chip is used, GCLK signal is enabled.Note 9. RFU1–18 are the reserved extended function interfaces. Please refer to “4.4.3 Reference Design for Expandable Interfaces ”.4.4.3 Reference Design for Expandable Interfaces R T EC HCODescription:RFU8 and RFU10 are signal multiplexing expandable interfaces for which the interfaces of either Recommended Smart Module Interface or Recommended Module Flash Interface can be selected at a time.X I'A NN OV AS TA RT EC HC O.,LT D.Product Description 5 Software Structure5 Software StructureProgram download method:Visit www.novastar.tech and choose Download > Firmware. On the Firmwaresection, choose the desired program package to download.X I'A NN OV AS TA RT EC HC O.,LT D.Product Description 6 Typical Networking6 Typical NetworkingA8s is applied to LED display synchronous system which is generally composed ofthe LED display, HUB board, receiving card, video controller and controller peripheral.The receiving card is connected to the display over a HUB board.Synchronous system requires connecting a computer to display the computer’simages and texts on the LED screen. Structure of the synchronous system is asshown in the following figure.X I'A NN OV AS TA RT EC HC O.,LT D.Product Description 7 Specifications7 SpecificationsAX I'Product Description A Acronyms and AbbreviationsA Acronyms and AbbreviationsEEMC Electromagnetic CompatibilityFFPGA Field-Programmable Gate ArrayLLED Light Emitting DiodeMMCU Microcontroller UnitRRCFG Receiving Card ConfigurationX I'A NN OV AS TA RT EC HC O.,LT D.Product DescriptionB TermsBTerms18Bit+ Specify the grayscale of LED displays. Enabling 18 bit mode on NovaLCT could improve LED display grayscale by 4 times, and therefore avoid grayscale loss caused by brightness reduction and make images finer.ClearViewDisplay screen effects. Enable ClearView on NovaLCT to adjust the texture, size and contrast in different area based on human visual system to make image more realistic.Calibration coefficientCalibration system generates a group of values for each LED lamp, including information about brightness and chroma. After display calibration, the calibration values of each lamp are just the calibration coefficient. Smart moduleThe smart module is composed of Flash and MCU.Flash could store calibration coefficients and module information. MCU could communicate with the receiving card to realize monitoring over temperature, voltage and wiring communication status, as well as LED error detection.The smart module could make monitoring unit smaller, requiring no independentmonitoring card and saving cabinet space.MappingAfter the Mapping function is enabled on NovaLCT, the target cabinet will displaythe cabinet number and Ethernet port information, and the user could get the receiving card’s location and wiring route.Error detectionPerform status detection for each LED lamp. If the LED lamp fails, the user could notify in a timely manner upon monitoring system.XI 'AN N OVA S T AR T EC HCO .,L T D.。

诺瓦科技LED全彩屏接收卡MRV220规格书英文版

Product images provided in this file are for reference only , and the actual products shall prevail.Rev2.1.4 NS110100247SpecificationsReceiving Card MRV220FeaturesMRV220 is the receiving card of Nova with 28-group data mode. It has thefollowing features:1)Single card outputs 24-group of RGB data;2)Single card outputs 28-group of RGB data;3) Single card support resolution 256x226;4) Configuration file read back;5) Temperature monitoring;6) Ethernet cable communication status detection;7) Power supply voltage detection;8) Pixel-by-pixel brightness and chromaticity calibration, Brightnessand chromaticity calibration coefficients for each LED;9) Comply with RoHS standard ;10) C omply with EU CE-EMC Class A standard.Output Interface DefinitionUnder all the two different working modes of it, two 60P interfaces canoutput different data. Each 60p contains two 30P with the samedefinition. Interfaces are defined as follows:1)24-group data modeSupport ing 24 sets of parallel data ,defined as follows:2)28-g roup data modeSupporting 28 sets of parallel data. Serial data decoding is required for scan mode above 1/8 scan (Serial data decoding circuit in the appendix), defined as follows:Supporting 64 sets of serial data, defined as follows:DimensionsThickness of the board is about 2mm. The overall thickness ( b oard thickness ＋ t hickness of the components on front and back side) is about 18 m m .Unit: mm.AppearanceSpecific Model ListTo meet the needs of different customers, Nova has provided more specificmodels of the products, including standard products in stock. Page 10 Page 11 Other models need to be customized.AppendixSerial data decoding circuit ：。

诺瓦科技LED接收卡X200-1规格书英文版

X200-1Receiving CardSpecificationsDocument Version: V1.2.0Document Number: NS110100469Specifications Change HistoryChange HistorySpecifications ContentsContentsChange History (i)1 Safety (1)2 Overview (2)3 Features (3)4 Hardware Structure (4)4.1 Appearance (4)4.2 Dimensions (5)4.3 Definition of Data Interface (6)5 Specifications (9)Specifications 1 Safety1 SafetyThis chapter illustrates safety of the X200-1 receiving card to ensure the product’sstorage, transport, installation and use safety. Safety instructions are applicable to allpersonnel who contact or use the product. First of all, pay attention to the followingpoints.●Read through the instructions.●Retain all instructions.●Comply with all instructions.Storage and Transport Safety●Pay attention to dust and water prevention.●Avoid long-term direct sunlight.●Do not place the product at a position near fire and heat.●Do not place the product in an area containing explosive materials.●Do not place the product in a strong electromagnetic environment.●Place the product at a stable position to prevent damage or personal injurycaused by dropping.●Save the packing box and materials which will come in handy if you ever have tostore and ship the product. For maximum protection during storage andshipping, repack the product as it was originally packed at the factory. Installation and Use Safety●Only trained professionals may install the product.●Plugging and unplugging operations are prohibited when the power is on.●Ensure safe grounding of the product.●Always wear a wrist band and insulating gloves.●Do not place the product in an area having frequent or strong shake.●Perform dust removing regularly.●Contact us for maintenance at any time, rather than have the productdisassembled and maintained by non-professionals without authorization.●Replace faulty parts only with the spare parts supplied by us.2 Overview The X200-1 is a small receiving card with multiple functions provided by Leyard III, featuring a loading capacity of 256×256 pixels.The X200-1 supports pixel level brightness and chroma calibration, which effectively removes color difference, greatly improves display consistency of LED images, and presents finer displays to users.3 Features●Outputs 32 groups of RGB parallel data.●Supports 1/32 scan.●Supports readback of configuration file.●Supports monitoring of temperature, power voltage, and Ethernet cablecommunication status.●Supports pixel level brightness and chroma calibration.●Supports high grayscale and high refresh rate.●Supports setting of images pre-stored in the receiving card.●Supports dual card backup.●Supports dual power backup.●Supports loop backup.●Supports smart module, which stores and manages calibration coefficients,module information and relevant parameters.4 Hardware Structure 4.1 AppearancePictures shown in this document are for illustration purpose only. Actual product maydiffer.4.2 DimensionsThe unit of dimension chart is “mm”. The location holes are connected to signalgrounds (GND).4.3 Definition of Data Interface 32 Groups of RGB Parallel Data ModeSpecifications 4 Hardware StructureSpecifications 5 Specifications5 Specifications。

LED地砖屏视频控制器诺瓦科技诺瓦科技V700规格书

产品规格书视频控制器 V 700Rev1.0.1 NS160000065概述V700 是Nova专业级的LED显示屏控制器，拥有前端视频处理和显示屏控制二合一功能。

V700强大的图像处理、专业的图像控制、以及友好的人机界面使显示屏控制工作从未如此轻松和愉快。

功能特性1)具有完备的视频输入接口，包括2路CVBS，1路VGA，1路DVI，1路HDMI。

部分接口支持的输入分辨率最高可达1920×1200@60H z；2)V700 可根据显示屏分辨率对输入图像进行逐点缩放；3)视频源一键切换；4)提供无缝的快切和淡入淡出的切换效果，以增强并呈现专业品质的演示画面；5)画中画的位置、大小等均可调节，可以随心所欲的控制；6)采用Nova G4引擎，画面稳定无闪烁、无扫描线、图像细腻、层次感好；7)根据屏幕所用LED的不同特性，实施白平衡校准及色域匹配，确保真实色彩还原；8)HDMI音频输入；外置独立音频输入；9)支持高位阶视频输入，10b it/8bit；10)视频输出带载能力：1280x1024、1440x900，（130万像素）；11)支持Nova新一代逐点校正技术，校正过程快速高效；12)V700无须通过计算机软件进行系统配置。

现在只需对一个旋钮和一个按钮进行操作即可完成系统配置，所有操作几步即可完成，这就是我们所倡导的“司机点屏”！13) 采用创新型架构，实现智能配置，屏幕调试可在数分钟内完成，极大缩短舞台准备时间；14) 一个直观的 LCD 显示界面，清晰的按键灯提示，简化了系统的控制。

外观说明前面板后面板。

诺瓦科技LED显示屏视频控制器J6规格书英文版

Rev1.0.1 NS160100145J6Multi-Screen Splicing ProcessorDeveloped by NovaStar, J6 is the latest high-performance multi-screen splicing processor featuring enhanced image processing. Based on a powerful FPGA processing platform, J6 supports quick seamless switch of any input source and supports transition effects such as fade, etc., allowing you to experience more flexible screen layouts.In addition, J6 can work with the new smart management software V-Can to enable more screen splicing effects and better satisfy your needs.X i’an No v aS t ar Te c hC o.,Lt d.Features•Supports a wide range of video inputs divided into 4 groups with 8 connectors, including 1×HDMI (or VGA, or DVI), 4 × DVI, 2 × SDI, and 1 × DualLink DVI (or HDMI 1.4, or DP1.1). •The input resolution of Input A supports 4K×2K@30Hz. Other inputs support 1920×1080@60Hz which are downward compatible.•Supports 5 × outputs, including 4 groups with 8 DVI connectors for splicing output, and 1 × HDMI preview output.•The preview connector supports preview of PVW, PGM and 8 × input signals.•Output resolution is settable. The splicing width of 4 channels can be up to 15360×600. •Up to 6 windows can be displayed simultaneously and the resolution of each window is up to 7680×1080@60Hz. J6 also supports one OSD of up to 4K×2K, which can be images or texts.•The window position, size, etc. are adjustable, and each window can be added with borders of custom color and widths.•Besides the 6 built-in preset templates, up to 16 user presets can be created and saved as templates. All the presets can be used directly and easily.•Provides 21 transition effects to enhance and present images with professional quality. •An intuitive color LCD on the front panel and clear button indicator lights simplify the system control operations.•Supports Genlock synchronization, allowing you to choose any input source or external synchronization signal to achieve vertical synchronization.AppearanceFront PanelRear PanelX i’a n No v aS t ar Te c hC o.,Lt d.Specifications.DimensionsJ6 Dimensions (mm)XI'AN NOVASTAR TECH CO., LTD.No. 68, 2nd Keji Road, High-tech Industries Development Zone, Xi'an 710075, P .R. ChinaPhone: +86-29-68216000 Fax: +86-29-84507072www.novastar .techCopyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved. E&OEXi ’a n N ov a S t ar Te ch Co .,L t d .。

诺瓦科技光探头NS060-5A规格书英文版

NS060-5ALight SensorDocument Version: V1.0.0 Document Number:NS110000372SpecificationsXI 'AN NOVA S T AR T E C H CO .,LT D.Copyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved.No part of this document may be copied, reproduced, extracted or transmitted in any form or by any means without the prior written consent of Xi’an NovaStar Tech Co., Ltd.Trademarkis a registered trademark of Xi’an NovaStar Tech Co., Ltd.StatementYou are welcome to use the product of Xi’an NovaStar Tech Co., Ltd. (hereinafter referred to as NovaStar). This document is intended to help you understand and use the product. For accuracy and reliability, NovaStar may make improvements and/or changes to this document at any time and without notice.Any problem in use or any good suggestion, please contact us through ways provided in the document. We will do our utmost to solve the problems and adopt the suggestions after evaluation as soon as possible.X I'A NN OV AS TA RT EC HC O.,L TD.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,L TDSpecifications ContentsContentsChange History (ii)Contents ............................................................................................................................................. i ii1 Overview (1)2 Features (1)3 Operating Conditions (2)4 Dimensions (3)5 Assembly (4)6 Specifications (5)X I'A NN OV AS TA RT EC HC O.,L TD.Specifications1 Overview1OverviewThe NS060-5A is a light sensor designed and produced by NovaStar, which can beconnected to NovaStar sending cards, asynchronous cards or multifunction cards for monitoring ambient brightness, thus achieving automatic brightness adjustment of LED display.2Features● Monitors the ambient brightness to achieve automatic brightness adjustment ofLED display.●Can be connected to sending cards (MSD300/600, MCTRL300, etc.), asynchronous cards or multifunction cards.● 5-meter standard cable, which can be extended to 100 meters● Mildew, moisture and salt-mist resistant design, ideal for outdoor applications ●No external power supply is required.XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 3 Operating Conditions3 Operating ConditionsThe NS060-5A light sensor can work with devices that have light sensor connectors,such as sending cards, asynchronous cards or multifunction cards, and it should beplaced in the same environment with the LED display.The connection between the light sensor and the multifunction card is shown as below.Figure 3-1 Connection to multifunction card MFN300X I'A NN OV AS TA RT EC HC O.,L TD.Specifications 4 Dimensions4 DimensionsFigure 4-1 Dimensions of NS060-5A light sensorUnit: mmX I'A NN OV AS TA RT EC HC O.,L TD.Specifications5 Assembly5AssemblyPrepareInstallCompleteTips: It is recommended to apply outdoor waterproof adhesive to the joint of the sensorbody and the substrate after the installation is completed, and check it regularly.XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 6 Specifications6 SpecificationsX I'A NN OV AS TA R.。

诺瓦科技LED屏视频处理器J6规格书

J6Multi-Screen Splicing ProcessorCo., Developed by NovaStar, J6 is the latest high-performance multi-screen splicing processorfeaturing enhanced image processing. Based on a powerful FPGA processing platform, J6 supports quick seamless switch of any input source and supports transition effects such asfade, etc., allowing you to experience more flexible screen layouts.In addition, J6 can work with the new smart management software V-Can to enable more screen splicing effects and better satisfy your needs.Rev1.0.0NS160100145XI'AN NOVASTAR TECH CO., LTD.Features•Supports a wide range of video inputs divided into 4 groups with 8 interfaces, including 1×CVBS/VGA/HDMI/DVI(allowing you to choose any one of these 4 interfaces), 1×DualLink DVI/HDMI 1.4/DP1.1(allowing you to choose any one of these three interfaces).•Input resolution of Input A supports 4K*2K@30Hz. Other inputs support 1920*1080@60Hz which are downward compatible.•Supports 5 output channels, including 4 groups with 8 interfaces of DVI splicing output and one HDMI preview output.•The preview interface supports preview of 8 video input signals, and supports overlapping display of information like input resolution, frame rate, etc.•Output resolution can be set. Splicing width of 4 channels can be up to 15360*600. •Capable of displaying 6 windows simultaneously at most and the maximum resolution of each window is up to 7680×1080@60Hz. J6 also supports one channel of OSD allowing to overlap with images or texts.•Window position, size, etc. are adjustable allowing to add borders to the windows and set border width, color, etc.•Capable of creating 16 presets which are saved as templates and can be used directly and easily.•Provides dozens of input source transition effects to enhance and present demo images with professional quality.•An intuitive color LCD on the front panel and clear button indicator lights simplify the system control operations.•Supports Genlock synchronization, allowing you to choose any input source or external synchronous signal to achieve frame lock output.AppearanceFront PanelRear PanelDimensionsNo. 68,2 Keji Road, High-tech Industrial Development Zone, Xi'an 710075, P .R. China Phone: +86-29-68216000Fax: +86-29-84507072 www.novastar .techCopyright © 2017 Xi’an NovaStar Tech Co., Ltd. All Rights Reserved. E&OETechCo.,J6 Dimensions (mm)XI'AN NOVASTAR TECH CO., LTD.nd。

诺瓦科技LED光电转换器FE600规格书英文版

FE600Fiber ConverterVersion ： V1.0.0Document Number ： NS110100455SpecificationsXI 'AN NOVA S T AR T E C H CO .,LT D.Specifications Change HistoryChange HistoryX I'A NN OV AS TA RT EC HC O.,L TSpecifications ContentsContentsChange History (i)1 Overview (1)2 Features (1)3 Appearance (2)3.1 Front panel (2)3.2 Rear panel (2)4 Dimensions (3)5 Specifications (4)X I'A NN OV AS TA RT EC HC O.,L TD.Specifications1 Overview1OverviewFE600 is a fiber converter developed by NovaStar independently, which enables thesignal conversion between optical fiber and twisted pair cables. It allows long-distance signal transmission that is stable and not be easily interfered. Being easy to use, FE600 makes it convenient to connect terminal devices as well as simpler for onsite connections.2Features● Supports 16-channel Neutrik Ethernet inputs and outputs.● Supports 4-channel optical fiber inputs/outputs. Two of them are masterinput/output channels and the other two are backups.● With dual-power redundancy backup inside for more stability and reliability. ● Two types of power interfaces (3-pin power socket and PowerCON) are supported to meet different needs of customers.● With various indicator lights on the front panel, each status can be showed clearly.●With USB and Ethernet control interfaces making it more flexible and much easier to connect main control computers.XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 3 Appearance3 Appearance 3.1 Front panelIndicator lights are on the middle area of the front panel:●Indicator lights of Ethernet port 1~8 corresponding to OPT1/OPT3 are on theupper half of this area. Lights on the first line indicate whether the connection ofeach port is available and lights on the second line indicate whether the port hasdata transmission.●Power indicator light and overall status indicator light are on the middle of thisarea.●Indicator lights of Ethernet port 9~16 corresponding to OPT2/OPT4 are on thelower half of this area. Lights on the first line indicates whether the connection ofeach port is available and lights on the second line indicate whether the port hasdata transmission.●In addition, the small triangle lights near “OPT”indicate whether theconnection of each optical fiber port is available.Note: OPT1 is corresponding to Ethernet port 1~8 and OPT2 is corresponding to Ethernet port 9~16. Inaddition, OPT3 is the backup of OPT1 and OPT4 is the backup of OPT2.3.2 Rear panelX I'A NN OV AS TA RT EC HC O.,L TD.Specifications4 Dimensions4Dimensions单位（mm ）XI 'AN NOVA S T AR T E C H CO .,LT D.Specifications 5 Specifications5 SpecificationsX I'A.。