最新CCNA第一学期第五章答案

合集下载

CCNA-Exploration-网络基础知识-第五章练习及答案

17．请参见图示。网络管理员正在排除连接故障，需要确定用于向网络外转发网络数据包的地址。管理员使用netstat -r命令确定该地址时，会发现所有主机将发往外部网络的数据包发送到以下哪个地址？
○10.10.10.26○127.0.0.1○10.10.10.6○10.10.10.1○224.0.0.0
□R1使用192.168.0.1作为下一跳地址将数据包从192.168.12.0网络路由到172.16.0.0网络。
□R3使用172.16.0.1作为下一跳地址将数据包从10.0.0.0网络路由到172.16.0.0网络。
□R2使用192.168.0.1作为下一跳地址将数据包从172.16.0.0网络路由到192.168.12.0网络。
15．请参见图示。图中显示的所有设备均为出厂默认设置。图示拓扑代表多少个广播域？
○3○4○5○7○8○11Otion 216．下列关于路由及其用途的陈述，哪三项是正确的？（选择三项）
□如果找不到通往目的网络的路由，则将数据包返回前一个路由器。
□如果目的网络直接连接的网络，路由器会将数据包转发到目的主机。
○路由器发送ARP请求以确定所需的下一跳地址。
○路由器丢弃数据包。
○路由器将数据包转发到ARP表所示的下一跳。
○路由器将数据包转发到源地址所示的接口。
○路由器将数据包从默认路由条目所确定的接口发出。
Option 2 and Option 5 are correct.
11．将主机分组到同一个网络时应考虑哪些关键因素？（选择三项）
□网关□用途□物理编址□软件版本□地理位置□所有权
Option 2, Option 5, and Option 6 are correct.
12．以下哪一项是路由表条目的组成部分？

（完整版）计算机网络（第二版）胡亮等编著第五章习题及答案

（完整版）计算机⽹络（第⼆版）胡亮等编著第五章习题及答案复习指南：本章共有5.1-5.7七节内容，没有在考试之外的。

5.1-5.2，⽤时25min。

5.3-5.4，⽤时90min。

5.5，⽤时30min。

5.6，⽤时60min。

5.7，⽤时35min。

参考上课⽤时，可推测重点章节为5.3，5.4，5.6。

推荐看PPT。

5.5，5.7掌握概念。

5.1，5.2简单了解。

课后习题：5.1 通讯⼦⽹的最⾼层是哪⼀层？5.2 ⽹络层的两个主要功能是什么？5.3 在OSI模型中，⽹络层提供了哪两种服务？5.4 ⾯向连接的⽹络服务完成⼀次传输需要哪⼏个过程？5.5 说明⾯向连接的服务和⾯向⽆连接的服务的优缺点。

5.6 说明为什么在⽹络中各个结点对虚电路进⾏独⽴编号。

5.7 第三层交换机与传统的路由器相⽐有哪些优点？5.8 路由选择的最基本要求是什么？5.9 什么是⾮适应性路由选择？什么是适应性路由选择？5.10 什么是拥塞？拥塞产⽣的原因是什么？拥塞对系统有什么影响？5.11 拥塞控制的⽅法有哪些？5.12 在流量控制中，如果采⽤数据报⽅式⼯作，容易产⽣什么样的死锁？如果采⽤虚电路的⽅式⼯作，容易产⽣什么样的死锁？5.13 常⽤的计算最短路径的⽅法有哪两种？5.14 ⽐较距离向量路由和链状状态路由？OSPF属于哪类路由协议？BGP协议属于哪类协议？习题参考答案：5.1 通讯⼦⽹的最⾼层是哪⼀层？⽹络层是通讯⼦⽹的最⾼层，也是主机和通讯⼦⽹的接⼝。

5.2 ⽹络层的两个主要功能是什么？交换和路由。

交换是在两个或者多个设备之间建⽴临时链接，使没有物理链路直接相连的两个或者多个设备之间能够通信。

路由是选择从⼀点到另⼀点发送数据包的最佳路径。

5.3 在OSI模型中，⽹络层提供了哪两种服务？OSI: ⾯向连接的⽹络服务（CONS）和⾯向⽆连接的⽹络服务（CLNS）。

TCP/IP: ⾯向⽆连接的⽹络服务（CLNS）。

5.4 ⾯向连接的⽹络服务完成⼀次传输需要哪⼏个过程？发送者发送⼀个连接请求包，接收者使⽤⼀个连接确认包进⾏确认，发送者传输数据，发送者发送⼀个连接终⽌请求包，接收者使⽤⼀个连接终⽌包进⾏确认。

ccna第五章考试题

1对网络电缆采用的连接器不正确可能产生什么后果？会将数据转发到错误的节点。

通过该电缆传输的数据可能发生信号丢失。

将对该电缆中传输的数据采用不正确的信号方法。

该电缆中发送的数据所采用的编码方法将更改，用于补偿不当连接。

2大多数企业LAN 中的双绞线网络电缆使用哪种连接器？BNCRJ-11RJ-45F 型3在网络中传输数据时，物理层的主要作用是什么？创建信号以表示介质上每个帧中的比特为设备提供物理编址确定数据包的网络通路控制数据对介质的访问4数据传输的三种量度标准是什么？（选择三项）实际吞吐量频率幅度吞吐量串扰带宽5UTP 电缆的哪个特征有助于减少干扰的影响？屏蔽层中的金属编织包裹核心的反射涂层电缆中的线对绕绞外皮中的绝缘材料6XYZ 公司正在其数据网络中安装新的电缆。

下列哪两种类型是新架设时最常用的电缆？（选择两项）同轴4 类UTP5 类UTP6 类UTPSTP7使用什么设备可以检查安装的光纤是否存在错误并检查其完整性和介质性能？光注入器OTDRTDR万用表8以下哪项是单模光缆的特征？一般使用LED 作为光源因为有多条光通路，核心相对较粗价格比多模低一般使用激光作为光源9请参见图示。

哪种 5 类电缆用于在主机 A 和主机 B 之间建立以太网连接？同轴电缆全反电缆交叉电缆直通电缆10以下哪项被视为选择无线介质的优点？主机移动更方便安全风险更低减少干扰的影响环境对有效覆盖面积的影响更小11如果在网络中使用非屏蔽双绞线铜缆，导致线对内串扰的原因是什么？相邻线对周围的磁场使用编织线屏蔽相邻线对从电缆远端反射回来的电波因两个节点尝试同时使用介质而导致的冲突12哪种光纤连接器支持全双工以太网？13哪种电缆通常与光缆相关联？主干电缆水平电缆跳线电缆工作区域电缆14在可能存在电气危险或电磁干扰的LAN 安装中，主干布线建议使用哪种类型的介质？同轴光纤5e 类UTP6 类UTP15网络中什么时候使用直通电缆？通过控制台端口连接路由器时连接两台交换机时连接主机与交换机时连接两台路由器时16以下哪些特征描述的是光缆？（选择两项）不受 EMI 或RF I 影响。

CCNA第一学期第五章答案

C C N A第一学期第五章答案集团文件版本号：（M928-T898-M248-WU2669-I2896-DQ586-M1988）最新CCNA第一学期第五章答案一个 MAC 地址包含 6 个字节。

前 3 个字节用于供应商标识，最后 3 个字节必须在同一 OUI 中分配唯一的值。

MAC 地址在硬件中实施。

网卡需要使用 MAC 地址来通过 LAN 通信。

IEEE 规范了 MAC 地址。

争用方法具有不确定性，没有受控访问方法中遇到的开销。

因为设备不需要轮流访问介质，所以无需跟踪次序。

争用方法在介质使用率高的情况下无法很好地扩展。

逻辑链路控制在软件中实施，能够让数据链路层与协议簇的上层协议通信。

网卡驱动程序软件直接与网卡上的硬件交互，可在 MAC 子层和物理介质之间传输数据。

逻辑链路控制在 IEEE 802.2 标准中指定。

IEEE 802.3 是定义不同以太网类型的一组标准。

MAC（介质访问控制）子层负责定位和检索介质上和介质外的帧。

组播 MAC 地址是一个特殊的十六进制数值，以 01-00-5E 开头。

然后将IP 组播组地址的低 23 位换算成以太网地址中剩余的 6 个十六进制字符，作为组播 MAC 地址的结尾。

MAC 地址的剩余位始终为“0”。

在此例中：224（十进制）=> 01-00-5E34（十进制）= 00100010（二进制）= 22（十六进制）56（十进制）= 00111000（二进制）= 38（十六进制）综合结果：01:00:5E:0B:22:38如果整个路径都基于以太网，则目的和源 MAC 地址将随着每个路由器跳数发生变化。

除非网络地址转换处于活动状态，否则目的 IP 地址在整个路径中保持不变。

请参见图示。

由于 PC1 需要向 PC2 发送数据包，因此 PC1 发出一个ARP 请求。

在这种情况下，接下来将发生什么？当一台网络设备要与相同网络中的另一台设备通信时，它会发送广播ARP 请求。

CCNA认证基础课程-课后作业.习题答案

CCNA认证基础-习题分析讲义第一部分第一章1. Convert the binary number 10111010 into its hexadecimal equivalent. Select thecorrect answer from the list below. （3）1) 852) 903) BA4) A15) B36) 1C2. Convert the Hexadecimal number A2 into its Base 10 equivalent. Select thecorrect answer from the list below. （4）1) 1562) 1583) 1604) 1625) 1646) 1663. Which binary number is a representation of the decimal number 248? （3）1) 111010002) 111101003) 111110004) 111110104. Which of the following will test the internal loopback of a node? （3）1) ping 10.10.10.12) ping 192.168.1.13) ping 127.0.0.14) ping 223.223.223.2235) ping 255.255.255.2555. What can be verified by successfully pinging the reserved loopback address ona host? （2）1) Connectivity exists between two hosts on the LAN.2) The TCP/IP stack of the local host is configured correctly.3) A connection exists between a host and the default gateway.4) The route a packet takes from the local host to a remote host is valid.6. Which of the following commands could be used on a Windows-basedcomputer to view the current IP configuration of the system? (Choose two.) （3，4）1) configip2) ifconfig3) ipconfig4) winipcfg5) Winipconfig7.Refer to the exhibit. What must be configured on Host B to allow it to communicate withthe Host C? (Choose three.) （2，4，6）1)the MAC address of RTA router interface connected to Switch 12) a unique host IP address3)the IP address of Switch 14)the default gateway address5)the MAC address of Host C6)the subnet mask for the LAN8. What are important characteristics to consider when purchasing a networkinterface card? (Choose two.) （2，3）1) security used on the network2) media used on the network3) system bus used on the computer4) software installed on the network5) diagnostic tools installed on the network第二章1. Select the necessary information that is required to compute the estimated timeit would take to transfer data from one location to another. (Choose two.) （1，5）1) file size2) data format3) network in use4) type of medium5) bandwidth of the link2. Using the data transfer calculation T=S/BW, how long would it take a 4MB file tobe sent over a 1.5Mbps connection? （2）1) 52.2 seconds2) 21.3 seconds3) 6.4 seconds4) 2 seconds5) 0.075 seconds6) 0.0375 seconds3. What are features of the TCP/IP Transport layer? (Choose two.) （3，5）1) path determination2) handles representation, encoding and dialog control3) uses TCP and UDP protocols4) packet switching5) reliability, flow control and error correction4. Which of the following is the Layer 4 PDU? （4）1) bit2) frame3) packet4) Segment5. What is important to remember about the data link layer of the OSI model whenconsidering Peer to Peer communication? (Choose three.) （3，4，5）1) It links data to the transport layer.2) It encapsulates frames into packets.3) It provides a service to the network layer.4) It encapsulates the network layer information into a frame.5) Its header contains a physical address which is required to complete the datalink functions.6) It encodes the data link frame into a pattern of 1s and 0s (bits) for transmissionon the medium.6. Which statement describes a star topology? （2）1) Each host in the network is connected to a backbone cable that is terminated atboth ends.2) Each host is connected to a hub or switch, either of which acts as a central pointfor all network connections.3) Each host is directly connected to two other hosts to form a long chain of hosts.4) Each host has a connection to all other hosts in the network.7. Which statements describe the logical token-passing topology? (Choose two.)（2）1) Network usage is on a first come, first serve basis.2) Computers are allowed to transmit data only when they possess a token.3) Data from a host is received by all other hosts. Electronic tokens are passedsequentially to each other.4) Token passing networks have problems with high collision rates.8. Which technologies are considered to be LAN technologies? (Choose two.) （2，5）1) DSL2) Token Ring3) Frame Relay4) ISDN5) Ethernet9.Refer to the exhibit. Host A wants to send a message to host B. Place the following stepsin the correct order so that the message can be sent. （4）A - add network layer addressesB - transmit bitsC - create application dataD - add data link layer addresses1) B, A, D, C2) D, A, C, B3) A, D, A, B4) C, A, D, B5) C, D, A, B6) C, B, A, D10.After an uns u ccessful ping to the local router, the technician decides to investigate therouter. The technician observes that the lights and fan on the router are not operational.In which layer of the OSI model is the problem most likely occurring? （4）1) transport2) network3) data link4) physical11. Refer t o the exhibit. What is the order of the TCP/IP Protocol Data Units as datais moved as indicated through the OSI model? （3）1) data, segments, frames, packets, bits2) data, packets, segments, frames, bits3) data, segments, packets, frames, bits4) data, packets, frames, segments, bits第三章1. Which combinations of charges will be repelled by electric force? (Choose two.)（4，6）1) neutral and neutral2) neutral and positive3) neutral and negative4) positive and positive5) positive and negative6) negative and negative2. Which of the following are considered the best media for use in data networkcommunications? (Choose three.) （2，3，6）1) glass2) fibers3) copper4) gold5) plastic6) silicon7) Silver3. Which of the following wireless standards increased transmission capabilitiesto 11 Mbps? （2）1) 802.11a2) 802.11b3) 802.11c4) 802.11d4. What is attenuation? （3）1) opposition to the flow of current2) measurement of electrical signals relative to time3) degradation of a signal as it travels along the medium4) amount or volume of traffic that is flowing on the medium5. Which cable specifications are indicated by 10BASE-T? （3）1) 10 Mbps transmission speed, baseband signal, 500 meter cable length, coaxialcable2) 10 Mbps transmission speed, broadband signal, 100 meter cable length, coaxialcable3) 10 Mbps transmission speed, baseband signal, 100 meter cable length,twisted-pair cable4) 10 Gbps transmission speed, broadband signal, 500 meter cable length,twisted-pair cable6. For which Ethernet installations would fiber optic rather than Cat5 UTP be abetter media choice? (Choose two.) （2，4）1) a 3 meter connection between two 10BASE-T hubs2) an environment with many potential sources of EMI and RFI3) a peer to peer connection between two NICs with RJ45 connectors4) an installation between two buildings that are located 500 meters apart5) a single building installation where installation costs are the major concern7. Refer to the exhibit. Which type of UTP cable should be used to connect Host Ato Switch1? （4）1) rollover2) console3) crossover4) straight-through8. Refer to the exhibit. Which type of Category 5 cable is used to make an Ethernetconnection between Host A and Host B? （3）1) coax cable2) rollover cable3) crossover cable4) straight-through cable第四章1. During cable testing, which of the following are used to calculate theinformation carrying capacity of a data cable? (Choose two.) （2，5）1) bit speed2) attenuation3) wire map4) saturation limit5) analog bandwidth2. What type of wiring problem is depicted in this sample of a cable tester? （3）1) a fault2) a short3) an open4) a split a good map3. In a new network installation, the network administrator has decided to use amedium that is not affected by electrical noise. Which cable type will best meet this standard? （5）1) coaxial2) screened twisted pair3) shielded twisted pair4) unshielded twisted pair5) fiber optic4. How does network cable length affect attenuation? （3）1) Category 5 cable that is run in metal conduit has the highest attenuation in theshortest distance.2) Shorter cable lengths have greater signal attenuation.3) Longer cable lengths have greater signal attenuation.4) The length of the cable has no effect on signal attenuation.第五章1. The highest capacity Ethernet technologies should be implemented in whichareas of a network? (Choose three.) （3，4，5）1) between workstation and backbone switch2) between individual workstations3) between backbone switches4) between enterprise server and switch5) on aggregate access links2. What device must be used between an AUI port of a networking device and themedia to which it is being connected? （3）1) a transducer2) a transmitter3) a transceiver4) a transponder5) a port replicator3. An ISDN Basic Rate Interface (BRI) is composed of how many signalingchannels? （1）1) 12) 23) 34) 44. Which layer of the OSI model covers physical media? （1）1) Layer 12) Layer 23) Layer 34) Layer 45) Layer 56) Layer 65. What type of network cable is used between a terminal and a console port? （3）1) cross-over2) straight-through3) rollover4) patch cable6. What is the recommended maximum number of workstations configured on apeer-to-peer network? （3）1) 252) 153) 104) 55) 27. Which of the following increases the potential for a collision to occur? （4）1) the use of an active hub instead of an intelligent hub2) the use of an intelligent hub instead of an active hub3) a reduction in the number of devices attached to the hub4) an increase in the number of devices attached to the hub8. What is the maximum length of a media segment used for 100BASE-TX? （1）1) 100 meters2) 185 meters3) 400 meters4) 500 meters9. Which cable diagram displays the end to end pinout for a crossover cable usedwith Cisco devices? （3）1) Cable A2) Cable B3) Cable C4) Cable D第六章1. What does the "10" in 10Base2 indicate about this version of Ethernet? （2）1) The version uses Base10 numbering within the frames.2) The version operates at a transmission rate of 10 Mbps.3) Frames can travel 10 meters unrepeated.4) The maximum frame length is 10 octets.2. How is a MAC address represented? （4）1) four groups of eight binary digits separated by a decimal point2) four Base10 digits separated by a decimal point3) six hexadecimal digits4) twelve hexadecimal digits5) twenty-four Base10 digits3. Which of the following statements are correct about CSMA/CD? (Choose three.)（1，3，6）1) It is a media access method used in LANs.2) It is a media access method used in FDDI WANs.3) When a device needs to transmit, it checks to see if the media is available.4) A device sends data without checking media availability because all deviceshave equal access.5) Multiple devices can successfully transmit simultaneously.6) Only one device can successfully transmit at a time.4. Which devices shown in the graphic must have a MAC address? （5）1) only PC2) only router3) PC and router4) PC, hub, and router5) PC, printer, and router第七章1. Which of the following items are common to all 100BASE technologies?(Choose three.) （1，4，5）1) frame format2) media3) connectors4) timing5) multi-part encoding2. Which of the following does 1000BASE-T use to accomplish gigabit speeds onCat 5e cable? （4）1) the use of four conductors in full-duplex mode2) the use of two multiplexed pairs of wires, simultaneously3) the use of three pairs of wires for data and the fourth for stabilization andforward error correction4) the use of all four pairs of wires in full-duplex mode, simultaneously3. For which of the following is Ethernet considered the standard? (Choose three.)（1，4，5）1) inter-building connection2) mid-length voice3) video conferencing4) vertical wiring5) horizontal wiring6) diagonal wiring4. To make sure timing limitations are not violated when implementing a 10 MbpsEthernet network involving hubs or repeaters, a technician should adhere to which rule? （4）1) the 4-5-3 rule2) the 6-4-2 rule3) the 3-4-5 rule4) the 5-4-3 rule5. What is the maximum distance that 10BASE-T will transmit data before signalattenuation affects the data delivery? （1）1) 100 meters2) 185 meters3) 300 meters4) 500 meters6. When using Category 5 UTP cable, which RJ-45 pin pairs are used to exchangedata between hosts on an Ethernet network? （2）1) 1 and 2; 4 and 52) 1 and 2; 3 and 63) 3 and 6; 7 and 84) 4 and 5; 7 and 8第八章1. John has been hired as the network administrator of a local company and hasdecided to add more hubs to the company's existing network. Which of the following has been caused by John's inexperience? （1）1) collision domain extended2) an increased number of collision domains3) increased network performance4) increased bandwidth5) extended bandwidth2. "CompA" is trying to locate a new computer named "CompB" on the network.Which of the following does "CompA" broadcast to find the MAC address of "CompB"? （2）1) MAC request2) ARP request3) ping4) Telnet5) proxy ARP3. Which of the following is a term associated with replacing hubs with switchesto increase the number of collision domains? （3）1) encapsulation2) latency3) segmentation4) layered model5) broadcast domain6) Extended4. The accumulation of traffic from which of the following can cause a networkcondition called broadcast radiation? (Choose three.) （3，5，6）1) anonymous FTP servers2) telnet sessions3) video over IP applications4) NAS services5) ARP requests6) RIP updates5. Which of the following describes the use of Spanning Tree Protocol (STP)? （4）1) resolve routing loops2) eliminate Split Horizon errors3) limit collisions4) resolve switching loops6. Which term describes the delay in time that occurs when a frame leaves itssource device and reaches its destination? （4）1) collision2) backoff3) attenuation4) latency5) broadcast7. Based on the graphic above, which of the following occurs as each host systemcomes on line in the topology? （2）1) The switch sends its MAC address to each host.2) The switch adds MAC address to the bridge table as each host sends a frame.3) Each host exchanges MAC addresses with each other.4) The switch listens for data traffic to block since the switch lacks an IP address. 8. Which devices segment collision domains? (Choose two.) （2，3）1) transceiver2) router3) switch4) hub5) media9. Which protocol is used to eliminate switching loops? （3）1) Transmission Control Protocol2) Routing Information Protocol3) Spanning Tree Protocol4) Interior Gateway Routing Protocol5) Internetworking Protocol10. Refer to the exhibit. A network associate needs to establish an Ethernetconnection between Host A and Host B. However, the distance between the two hosts is further than the cabling standards allow. Which two devices that operate at the physical layer of the OSI can be used to allow Host A and Host B to communicate? （2，5）1) switch2) hub3) bridge4) router5) repeater第九章1. Which term describes an ARP response by a router on behalf of a requestinghost? （3）1) ARP2) RARP3) Proxy ARP4) Proxy RARP2. Which protocol functions at the internet layer of the TCP/IP protocol suite? （4）1) File Transfer Protocol (FTP)2) Trivial File Transfer Protocol (TFTP)3) Transmission Control Protocol (TCP)4) Internet Protocol (IP)5) User Datagram Protocol (UDP)6) Simple Mail Transport Protocol (SMTP)3. Which of these workstation installation and setup tasks are concerned withnetwork access layer functions? (Choose two.) （2，4）1) configuring the e-mail client2) installing NIC drivers3) configuring IP network settings4) connecting the network cable5) using FTP to download application software updates4. Which part of an IP address identifies a specific device on a network? （4）1) first two octets2) third and fourth octets3) network portion4) host portion5) only the fourth octet5. Which of the following are features of the Internet Protocol (IP)? (Choose two.)（1，3）1) It is the most widely implemented global addressing scheme.2) It allows two hosts to share a single address on a local area network.3) It is a hierarchical addressing scheme allowing addresses to be grouped.4) It is only locally significant, used primarily on local area networks.6. Which of the following are useable Class A IP addresses with a default subnetmask? (Choose three.) （2，3，5）1) 127.0.39.12) 111.9.28.303) 123.1.2.1324) 128.50.38.25) 105.1.34.16) 0.23.92.37. Which application layer protocols use UDP at the transport layer? (Choose two.)（2，4）1) FTP2) SNMP3) Telnet4) DHCP5) SMTP第十章1. Which OSI layer encapsulates data into packets? （3）1) session2) transport3) network4) data link2. Which OSI layer defines the functions of a router? （3）1) physical2) data link3) network4) transport5) session3. Which of the following are Cisco proprietary routing protocols? (Choose two.)（2，6）1) RIPv22) IGRP3) OSPF4) BGP5) RIPv16) EIGRP4. A company with a Class B license needs to have a minimum of 1,000 subnetswith each subnet capable of accommodating 50 hosts. Which mask below is the appropriate one? （4）1) 255.255.0.02) 255.255.240.03) 255.255.255.04) 255.255.255.1925) 255.255.255.2245. A small company has a class C network license and needs to create five usablesubnets, each subnet capable of accommodating at least 20 hosts. Which of the following is the appropriate subnet mask? （3）1) 255.255.255.02) 255.255.255.1923) 255.255.255.2244) 255.255.255.2406. When a network administrator applies the subnet mask 255.255.255.248 to aClass A address, for any given subnet, how many IP addresses are available to be assigned to devices? （6）1) 10222) 5103) 2544) 1265) 306) 67. Host A is assigned the IP address 10.18.97.55 /21. How many more networkdevices can be assigned to this subnetwork if Host A is the only one that has an IP address assigned so far? （4）1) 2542) 5093) 10214) 20455) 40946) 81908.Refe r to the exhibit. The network administrator wants to create a subnet for thepoint-to-point connection between the two routers. Which subnetwork mask would provide enough addresses for the point-to-point link with the least number of wasted addresses?1) 255.255.255.1922) 255.255.255.2243) 255.255.255.2404) 255.255.255.2485) 255.255.255.2529. What is the correct number of usable subnetworks and hosts for the IP networkaddress 192.168.35.0 subnetted with a /28 mask?1) 6 networks / 64 hosts2) 14 networks / 32 hosts3) 14 networks / 14 hosts4) 30 networks / 64 hosts10. Which subnet masks would be valid for a subnetted Class B address? (Choosetwo.) （5，6）1) 255.0.0.02) 255.254.0.03) 255.224.0.04) 255.255.0.05) 255.255.252.06) 255.255.255.19211. Refer to the exhibit. How will the Fohi router dynamically learn routes to the192.168.16.16/28, 192.168.16.32/28, and 192.168.16.48/28 subnetworks? （3）1) with a static route2) with a routed protocol3) with a routing protocol4) with a directly connected route12. How many broadcast domains are shown in the diagram? （1）1) three2) four3) five4) six5) seven6) eight13. How many collision domains are shown in the diagram? （5）1) three2) four3) five4) six5) seven6) eight14. A router interface has been assigned an IP address of 172.16.192.166 with amask of 255.255.255.248. To which subnet does the IP address belong?1) 172.16.0.02) 172.16.192.03) 172.16.192.1284) 172.16.192.1605) 172.16.192.1686) 172.16.192.17615. Refer to the exhibit. Host A is sending data to Host B. Once R2 determines thatdata from Host A must be forwarded to R1 to reach Host B, which layer of the OSI model will R2 use to address and build the frames destined for R1?1) physical2) data link3) network4) transport5) session6) presentation16. Which type of address is 192.168.170.112/28?1) host address2) subnetwork address3) broadcast address4) multicast address17. Which type of address is 223.168.17.167/29?1) host address2) multicast address3) broadcast address4) subnetwork address18. Which combination of network id and subnet mask correctly identifies all IPaddresses from 172.16.128.0 through 172.16.159.255?1) 172.16.128.0 255.255.255.2242) 172.16.128.0 255.255.0.03) 172.16.128.0 255.255.192.04) 172.16.128.0 255.255.224.05) 172.16.128.0 255.255.255.19219. Refer to the exhibit. The internetwork in the exhibit has been assigned the IPaddress 172.20.0.0. What would be the appropriate subnet mask to maximize the number of networks available for future growth?1) 255.255.224.02) 255.255.240.03) 255.255.248.04) 255.255.252.05) 255.255.254.06) 255.255.255.0第十一章1. If a network administrator needed to download files from a remote server, whichprotocols could the administrator use to remotely access those files? (Choose two.) （3，5）1) NFS2) ASCII3) TFTP4) IMAP5) FTP6) UDP2. What is established during a connection-oriented file transfer betweencomputers? (Choose two.) （2，5）1) a temporary connection to establish authentication of hosts2) a connection used for ASCII or binary mode data transfer3) a connection used to provide the tunnel through which file headers aretransported4) a command connection which allows the transfer of multiple commands directlyto the remote server system5) a control connection between the client and server3. Which of the following protocols are used for e-mail transfer between clientsand servers? (Choose three.) （3，4，5）1) TFTP2) SNMP3) POP34) SMTP5) IMAP46) postoffice4. Which type of institution does the domain suffix .org represent? （4）1) government2) education3) network4) non-profit5. Which of the following services is used to translate a web address into an IPaddress? （1）1) DNS2) WINS3) DHCP4) Telnet6. Which part of the URL http://www.awsb.ca/teacher gives the name of thedomain? （4）1) www2) http://3) /teacher4) awsb.ca7. Which protocols are TCP/IP application layer protocols? (Choose two.) （2，4）1) UDP2) FTP3) IP4) SMTP5) TCP8. What are three characteristics of the TCP protocol? (Choose three.) （3，4，6）1) has less overhead than UDP2) is used for IP error messages3) forces the retransmission undelivered packets4) creates a virtual session between end-user applications5) carries the IP address of destination host in the TCP header6) is responsible for breaking messages into segments and reassembling9. Two peer hosts are exchanging data using TFTP. During the current session, adatagram fails to arrive at the destination. Which statement is true regarding the retransmission of the datagram? （2）1) Datagram retransmission requires user authentication.2) Datagram retransmission is controlled by the application.3) Datagram retransmission relies on the acknowledgements at transport layer.4) Datagram retransmission occurs when the retransmission timer expires in thesource host.案例学习1. 子网计算练习：Answer2. 子网号及广播地址计算练习Answer3. 子网规划练习：已知：给定一个C类地址201.16.5.0/24。

ccna章节与期末答案

第一章：正确答案：2.4.5•解析：由于不需要使用网络设备和专用服务器，对等网络易于创建，复杂性更低，且成本更少。

而且对等网络也没有集中管理。

这种网络安全性更低，不可扩展，而且那些同时充当客户端和服务器的设备可能性能更差正确答案：1解析：正确答案： 3.5解析：选择网络介质的条件包括：所选介质可以成功传送信号的距离、要安装所选介质的环境、必须传输的数据量和速度以及介质和安装的成本。

正确答案：3和4解析：终端设备上的应用程序可以生成数据，更改数据内容并且负责启动封装过程。

正确答案：1和4解析：终端设备会发出通过网络传输的数据。

中间设备会在链路发生故障时通过备用路径传输数据，并且会过滤数据传输以增强安全性。

网络介质提供网络消息的传输通道。

正确答案：4解析：外联网是公司外部的人或企业合作伙伴访问数据的网络区域。

内部网只描述通常仅供内部人员访问的网络区域。

当设备连接到有线网络时，有线LAN 会受BYOD（自带设备）影响。

使用大学无线LAN 的设备多为平板电脑和智能手机。

大学生主要使用无线WAN 来访问他们的手机运营商网络。

.正确答案：2解析：由于通过Internet 可以联系在线供应商，所以家庭用户通过Internet 进行网上购物。

内联网基本上是仅供内部使用的局域网。

外联网是外部合作伙伴访问组织内部特定资源的网络。

家庭用户并不一定使用LAN 来访问Internet。

例如，PC 可以通过调制解调器直接连接到ISP。

正确答案：1解析：内部网这个术语用于表示一个组织的私有局域网和广域网连接。

内部网的设计旨在仅允许该组织的成员、员工或其他获得授权的人员进行访问。

正确答案：2和4解析：电缆和DSL 均能实现高带宽、始终联网，并提供到主机计算机或LAN 的以太网连接。

10正确答案：2和3解析：移动电话连接需要使用移动电话网络。

卫星连接通常用于家庭或企业外部不便使用物理布线的位置。

11正确答案：2解析：当对网络资源的请求超出了可用容量时，网络就会变得拥堵。

ccna2答案第五章共10页

第五章 RIPv1 CCNA2 Exploration: 路由协议和概念(2019-12-15 18:07:13)转载▼标签：杂谈分类： 2010｜CCNA2官方试题--路由1 窗体顶端ERouting Chapter 7 - CCNA Exploration: 路由协议和概念(版本 4.0)以下行显示在 show ip route 命令的输出中。

R 192.168.3.0/24 [120/3] via 192.168.2.2, 00:00:30, Serial0/0该路由度量的值是什么？3122030120 窗体底端2 窗体顶端下列关于 RIPv1 特性的陈述中，哪两项是正确的？（选择两项。

）它是一种距离矢量路由协议。

它会在路由更新中通告路由的地址和子网掩码。

RIP 消息的数据部分封装在 TCP 数据段中。

RIP 消息的数据部分封装在 UDP 数据段中。

它每 15 秒广播一次更新。

它最多允许路由域中存在 15 台路由器。

窗体底端3 窗体顶端请参见图示。

图中所示的网络运行 RIPv1。

不久前其中添加了192.168.10.0/24 网络，该网络将只包含最终用户。

如果要防止向新网络中的最终用户设备发送 RIPv1 更新，同时允许将此新网络通告给其它路由器，应该在 Router1 上输入什么命令？Router1(config-router)# no router ripRouter1(config-router)# network 192.168.10.0Router1(config-router)# no network 192.168.10.0Router1(config-router)# passive-interface fastethernet 0/0Router1(config-router)# passive-interface serial 0/0/0窗体底端4 窗体顶端请参见图示。

CCNA第一学期各章习题及答案

诶了我累了目录第二章网络通信P2-8第三章应用层功能及协议P9-14第四章OSI传输层P15-20第五章OSI网络层P21-27第六章网络编址-IPv4 P28-34第七章数据链路层P35-40第八章OSI物理层P41-45第九章以太网P46-51第十章网络规划和布线P52-61第十一章配置和测试网络P62-70第一学期末考试P71-91文档末尾返回目录第二章网络通信001 TCP/IP 网络接入层有何作用路径确定和数据包交换数据表示、编码和控制可靠性、流量控制和错误检测详细规定构成物理链路的组件及其接入方法将数据段划分为数据包002下列哪些陈述正确指出了中间设备在网络中的作用（选择三项）确定数据传输路径发起数据通信重新定时和重新传输数据信号发送数据流管理数据流数据流最后的终止点003下列哪三项陈述是对局域网(LAN) 最准确的描述（选择三项）LAN 通常位于一个地域内。

此类网络由由一个组织管理。

LAN 中的不同网段之间一般通过租用连接的方式连接。

此类网络的安全和访问控制由服务提供商控制。

LAN 为同一个组织内的用户提供网络服务和应用程序访问。

此类网络的每个终端通常都连接到电信服务提供商(TSP)。

004 什么是PDU传输期间的帧损坏在目的设备上重组的数据因通信丢失而重新传输的数据包特定层的封装005 OSI 模型哪两层的功能与TCP/IP 模型的网络接入层相同（选择两项）网络层传输层物理层数据链路层会话层006请参见图示。

所示网络属于哪一类型WANMANLANWLAN007 以下哪种特征正确代表了网络中的终端设备管理数据流发送数据流重新定时和重新传输数据信号确定数据传输路径008 第4 层端口指定的主要作用是什么标识本地介质中的设备标识源设备和目的设备之间的跳数向中间设备标识通过该网络的最佳路径标识正在通信的源终端设备和目的终端设备标识终端设备内正在通信的进程或服务009 请参见图示。

下列哪组设备仅包含终端设备A、C、DB、E、G、HC、D、G、H、I、JD、E、F、H、I、JE、F、H、I、J010 选择关于网络协议的正确陈述。

思科CCNA考试答案(全)

CCNA思科考试答案（全）第 1 章考试1一家拥有10 名员工的小型公司使用单个LAN 在计算机之间共享信息。

哪种类型连接适合此公司？由当地电话服务提供商提供的拨号连接能够使公司方便且安全地连接员工的虚拟专用网络通过当地服务提供商建立的私有专用线路通过当地服务提供商提供的宽带服务（如DSL）答案：4解析：对于这种小型办公室，比较适合通过被称为数字用户线路(DSL) 的常见宽带服务实现Internet 连接，这种服务由当地的电话服务提供商提供。

由于员工人数很少，带宽的问题并不突出。

如果公司较大，在远程站点有分支机构，则专用线路会更加适合。

如果公司员工需要通过Internet 与公司联系，则采用虚拟专用网。

2哪种网络情况需要使用WAN？员工工作站需要获取动态分配的IP 地址。

员工在出差时需要通过VPN 连接到公司电子邮件服务器。

分支机构的员工需要与同一园区网络上的另一座建筑物内的公司总部共享文件。

员工需要访问托管在其建筑物内DMZ 中的公司Web 服务器上的网页。

答案：2解析：当出差的员工需要通过WAN 连接到公司电子邮件服务器时，VPN 将通过WAN 连接在员工笔记本电脑与公司网络之间创建一个安全隧道。

通过DHCP 获取动态IP 地址是LAN 通信的功能。

在企业园区的不同建筑物之间共享文件可通过LAN 基础设施来实现。

DMZ 是企业LAN 基础设施内一个受保护的网络。

3以下哪项描述了WAN 的特征？WAN 和LAN 在同一地理范围内运行，但有串行链路。

WAN 网络归运营商所有。

所有串行链路均被视为WAN 连接。

WAN 可提供到园区主干网的终端用户网络连接。

答案：2解析：WAN 可用于将企业LAN 互连到远程分支机构站点LAN 和远程工作人员站点。

WAN 归运营商所有。

虽然WAN 连接一般通过串行接口实现，但并不是所有串行链路均连接至WAN。

LAN（而非WAN）可在组织中提供终端用户网络连接。

4电路交换WAN 技术的两个常见类型是什么？（请选择两项。

CCNA第一学期Finalexam考试英文版答案

CCNA第一学期Finalexam考试英文版答案(R&S.)C 1A medium-sized business is researching available options for connecting to the Internet.Thecompany is looking for a high speed option with dedicated, symmetric access.Whichconnection type should the company choose?DSLdialupsatelliteleased linecable modem2What is the purpose of having a converged network?to provide high speed connectivity to all end devicesto make sure that all types of data packets will be treated equallyto achieve fault tolerance and high availability of data network infrastructure devicesto reduce the cost of deploying and maintaining thecommunication infrastructure3What characteristic of a network enables it to quickly grow to support new users andapplications without impacting the performance of the service being delivered to existing users?reliabilityscalabilityquality of serviceaccessibility4Which connection provides a secure CLI session with encryption to a Cisco switch?a console connectionan AUX connectiona Telnet connectionan SSH connection5A network technician is attempting to configure an interface by entering the followingcommand:SanJose(config)#ip address192.168.2.1255.255.255.0.The command isrejected by the device.What is the reason for this? The command is being entered from the wrong mode of operation.The command syntax is wrong.The subnet mask information is incorrect.The interface is shutdown and must be enabled before the switch will accept the IP address.6After several configuration changes are made to a router, the copy running-configurationstartup-configuration command is issued.Where will the changes be stored?flashROMNVRAMRAMthe configuration registera TFTP server7Refer to the exhibit.From global configuration mode,an administrator is attempting to create a message-of-the-day banner by using thecommand banner motd V Authorized access only!Violators will be prosecuted!V When users log in using Telnet,the banner does not appear correctly.What is the problem? The banner message is too long.The delimiting character appears in the banner message.The symbol“!”signals the end of a banner message.Message-of-the-day banners will only appear when a user logs in through the console port.8What are three characteristics of an SVI?(Choose three.) It is designed as a security protocol to protect switch ports.It is not associated with any physical interface on a switch.It is a special interface that allows connectivity by different types of media.It is required to allow connectivity by any device at any location.It provides a means to remotely manage a switch.It is associated with VLAN1by default.9A technician configures a switch with these commands: SwitchA(config)#interface vlan1SwitchA(config-if)#ip address192.168.1.1255.255.255.0 SwitchA(config-if)#no shutdownWhat is the technician configuring?Telnet accessSVIpassword encryptionphysical switchport access10In computer communication,what is the purpose of message encoding?to convert information to the appropriate form for transmissionto interpret informationto break large messages into smaller framesto negotiate correct timing for successful communication11What protocol is responsible for controlling the size of segments and the rate at whichsegments are exchanged between a web client and a web server?TCPIPHTTPEthernet12What are two benefits of using a layered network model? (Choose two.)It assists in protocol design.It speeds up packet delivery.It prevents designers from creating their own model.It prevents technology in one layer from affecting other layers.It ensures a device at one layer can function at the next higher layer.13What is the process of dividing a data stream into smaller pieces before transmission?segmentationencapsulationencodingflow control14When IPv4addressing is manually configured on a web server,which property of the IPv4configuration identifies the network and host portion for an IPv4address?DNS server addresssubnet maskdefault gatewayDHCP server address15A network administrator is troubleshootingconnectivity issues on a ing a tester,the administrator notices that the signals generated by the server NIC are distorted and not usable.In which layer of the OSI model is the error categorized?presentation layernetwork layerphysical layerdata link layer16A network engineer is measuring the transfer of bits across the company backbone for amission critical database application.The engineer notices that the network throughputappears lower than the bandwidth expected.Which three factors could influence thedifferences in throughput?(Choose three.)the amount of traffic that is currently crossing the networkthe sophistication of the encapsulation method applied to the datathe type of traffic that is crossing the networkthe latency that is created by the number of network devices that the data is crossingthe bandwidth of the WAN connection to the Internetthe reliability of the gigabit Ethernet infrastructure of the backbone17Which type of UTP cable is used to connect a PC to a switch port?consolerollovercrossoverstraight-through18What is a characteristic of the LLC sublayer?It provides the logical addressing required that identifies the device.It provides delimitation of data according to the physical signaling requirements of the medium.It places information in the frame allowing multiple Layer 3protocols to use the same network interface and media.It defines software processes that provide services to the physical layer.19What are the three primary functions provided by Layer 2data encapsulation?(Choosethree.)error correction through a collision detection methodsession control using port numbersdata link layer addressingplacement and removal of frames from the mediadetection of errors through CRC calculationsdelimiting groups of bits into framesconversion of bits into data signals20What will a host on an Ethernet network do if it receives a frame with a destination MACaddress that does not match its own MAC address?It will discard the frame.It will forward the frame to the next host.It will remove the frame from the media.It will strip off the data-link frame to check the destination IP address.21What are two actions performed by a Cisco switch? (Choose two.)building a routing table that is based on the first IP address in the frame headerusing the source MAC addresses of frames to build and maintain a MAC address tableforwarding frames with unknown destination IP addresses to the default gatewayutilizing the MAC address table to forward frames via the destination MAC addressexamining the destination MAC address to add new entries to the MAC address table22What are two examples of the cut-through switching method?(Choose two.)store-and-forward switchingfast-forward switchingCRC switchingfragment-free switchingQOS switching23Refer to the exhibit.If host A sends an IP packet to host B,what will the destination address be in the frame when it leaves host A?DD:DD:DD:DD:DD:DD172.168.10.99CC:CC:CC:CC:CC:CC172.168.10.65BB:BB:BB:BB:BB:BBAA:AA:AA:AA:AA:AA24What are two services provided by the OSI network layer?(Choose two.)performing error detectionrouting packets toward the destinationencapsulating PDUs from the transport layerplacement of frames on the mediacollision detection25What information is added during encapsulation at OSI Layer3?source and destination MACsource and destination application protocolsource and destination port numbersource and destination IP address26What are two functions of NVRAM?(Choose two.)to store the routing tableto retain contents when power is removedto store the startup configuration fileto contain the running configuration fileto store the ARP table27Refer to the exhibit.The network administrator for a small advertising company has chosen to use the192.168.5.96/27 network for internal LAN addressing.As shown in the exhibit,a static IP address is assigned to the company web server.However,the web server cannot access the Internet.The administrator verifies that local workstations with IP addresses that are assigned by a DHCP server can access the Internet,and the web server is able to ping local workstations.Which component is incorrectly configured?subnet maskDNS addresshost IP addressdefault gateway address28Why does a Layer3device perform the ANDing process on a destination IP address andsubnet mask?to identify the broadcast address of the destination networkto identify the host address of the destination hostto identify faulty framesto identify the network address of the destination network29What are the three ranges of IP addresses that are reserved for internal private use?(Choosethree.)10.0.0.0/864.100.0.0/14127.16.0.0/12172.16.0.0/12192.31.7.0/24192.168.0.0/1630Which three addresses are valid public addresses? (Choose three.)198.133.219.17192.168.1.24510.15.250.5128.107.12.117192.15.301.24064.104.78.22731What type of IPv6address is FE80::1?loopbacklink-localmulticastglobal unicast32Refer to the exhibit.On the basis of the output,which two statements about network connectivity are correct? (Choose two.)There is connectivity between this device and the device at192.168.100.1.The connectivity between these two hosts allows for videoconferencing calls.There are4hops between this device and the device at 192.168.100.1.The average transmission time between the two hosts is2 milliseconds.This host does not have a default gateway configured.33Which subnet would include the address192.168.1.96as a usable host address?192.168.1.64/26192.168.1.32/27192.168.1.32/28192.168.1.64/2934How many hosts are addressable on a network that has a mask of255.255.255.248?268141625435Which statement is true about variable-length subnet masking?Each subnet is the same size.The size of each subnet may be different,depending on requirements.Subnets may only be subnetted one additional time.Bits are returned,rather than borrowed,to create additional subnets.36Refer to the exhibit.Consider the IP address of 192.168.10.0/24that has been assigned to a high school building.The largest network in this building has100 devices.If192.168.10.0is the network number for the largest network,what would be the network number for thenext largest network,which has40devices?192.168.10.0192.168.10.128192.168.10.192192.168.10.224192.168.10.24037In what two situations would UDP be the preferred transport protocol over TCP?(Choosetwo.)when applications need to guarantee that a packet arrives intact,in sequence,and unduplicatedwhen a faster delivery mechanism is neededwhen delivery overhead is not an issuewhen applications do not need to guarantee delivery of the datawhen destination port numbers are dynamic38What important information is added to the TCP/IPtransport layer header to ensurecommunication and connectivity with a remote network device?timing and synchronizationdestination and source port numbersdestination and source physical addressesdestination and source logical network addresses39What is the TCP mechanism used in congestion avoidance? three-way handshakesocket pairtwo-way handshakesliding window40Which three statements characterize UDP?(Choose three.)UDP provides basic connectionless transport layer functions.UDP provides connection-oriented,fast transport of data at Layer 3.UDP relies on application layer protocols for error detection.UDP is a low overhead protocol that does not provide sequencing or flow control mechanisms.UDP relies on IP for error detection and recovery.UDP provides sophisticated flow control mechanisms.41Which two tasks are functions of the presentation layer? (Choose two.)compressionaddressingencryptionsession controlauthentication42Which two protocols operate at the highest layer of the TCP/IP protocol stack?(Choose two.)DNSEthernetIPPOPTCPUDP43Which two roles can a computer assume in a peer-to-peer network where a file is beingshared between two computers?(Choose two.)clientmasterserverslavetransient44What is the function of the HTTP GET message?to request an HTML page from a web serverto send error information from a web server to a web clientto upload content to a web server from a web clientto retrieve client email from an email server using TCP port11045A wireless host needs to request an IP address.What protocol would be used to process therequest?FTPHTTPDHCPICMPSNMP46When planning for network growth,where in the network should packet captures take place toassess network traffic?on as many different network segments as possibleonly at the edge of the networkbetween hosts and the default gatewayonly on the busiest network segment47When applied to a router,which command would help mitigate brute-force password attacksagainst the router?exec-timeout30service password-encryptionbanner motd$Max failed logins=5$login block-for60attempts5within6048Refer to the exhibit.An administrator is testing connectivity to a remote device with the IP address10.1.1.1.What does the output of this command indicate?Connectivity to the remote device was successful.A router along the path did not have a route to the destination.A ping packet is being blocked by a security device along the path.The connection timed out while waiting for a reply fromthe remote device.。

ccna1章节与期末答案

第一章：正确答案：2.4.5•解析：由于不需要使用网络设备和专用服务器，对等网络易于创建，复杂性更低，且成本更少。

而且对等网络也没有集中管理。

正确答案：3和4解析：终端设备上的应用程序可以生成数据，更改数据内容并且负责启动封装过程。

正确答案：1和4解析：终端设备会发出通过网络传输的数据。

中间设备会在链路发生故障时通过备用路径传输数据，并且会过滤数据传输以增强安全性。

网络介质提供网络消息的传输通道。

正确答案：4解析：外联网是公司外部的人或企业合作伙伴访问数据的网络区域。

内部网只描述通常仅供内部人员访问的网络区域。

当设备连接到有线网络时，有线LAN 会受BYOD（自带设备）影响。

使用大学无线LAN 的设备多为平板电脑和智能手机。

大学生主要使用无线WAN 来访问他们的手机运营商网络。

.正确答案：2解析：由于通过Internet 可以联系在线供应商，所以家庭用户通过Internet 进行网上购物。

内联网基本上是仅供内部使用的局域网。

外联网是外部合作伙伴访问组织内部特定资源的网络。

家庭用户并不一定使用LAN 来访问Internet。

例如，PC 可以通过调制解调器直接连接到ISP。

正确答案：1解析：内部网这个术语用于表示一个组织的私有局域网和广域网连接。

内部网的设计旨在仅允许该组织的成员、员工或其他获得授权的人员进行访问。

正确答案：2和4解析：电缆和DSL 均能实现高带宽、始终联网，并提供到主机计算机或LAN 的以太网连接。

10正确答案：2和3解析：移动电话连接需要使用移动电话网络。

卫星连接通常用于家庭或企业外部不便使用物理布线的位置。

11正确答案：2解析：当对网络资源的请求超出了可用容量时，网络就会变得拥堵。

CCNA第一学期各章习题和参考答案.doc

CCNA第一学期各章习题和参考答案第二章网络通信1、TCP/IP网络接入层有何作用？A路径确定和数据包交换B数据表示、编码和控制C可靠性、流量控制和错误检测E将数据段划分为数据包2、下列哪些陈述正确指出了中间设备在网络中的作用？（选择三项）B发起数据通信D发送数据流F数据流最后的终止点3、下列哪三项陈述是对局域网(LAN) 最准确的描述？（选择三项）C LAN 中的不同网段之间一般通过租用连接的方式连接。

D此类网络的安全和访问控制由服务提供商控制。

F此类网络的每个终端通常都连接到电信服务提供商(TSP)。

004 什么是PDU？A传输期间的帧损坏B在目的设备上重组的数据C因通信丢失而重新传输的数据包005 OSI 模型哪两层的功能与TCP/IP 模型的网络接入层相同？（选择两项）018哪个应用层协议通常用于支持客户端与服务器之间的文件传输？A HTMLB HTTP D Telnet019哪个应用层协议中规定了Microsoft 网络中用于文件共享的服务？A DHCPB DNS D SMTP E Telnet020服务器上的应用层通常如何处理多客户端服务请求？A终止与服务的所有连接B拒绝与单一守护程序的多个连接C暂停当前连接，建立新连接第四章OSI传输层001下列哪两项是用户数据报协议(UDP) 的功能？（选择两项）A流量控制 D 面向连接E 序列和确认002请参见图示。

此Wireshark 捕获输出的第7 行中执行的是哪一项TCP 操作？A会话创建B 数据段重传C 数据传输D 会话断开003数据段的TCP 报头中为什么包含端口号？A指示转发数据段时应使用的正确路由器接口B 标识接收或转发数据段时应使用的交换机端口C确定封装数据时应使用的第3 层协议让接收主机转发数据到适当的应用程序E让接收主机以正确的顺序组装数据包004OSI 模型哪一层负责规范信息从源设备到目的设备准确可靠地流动？A应用层 B 表示层 C 会话层传输层 E 网络层005请参见图示。

CCNA第一学期各章知识题及答案解析

诶了我累了目录第二章网络通信P2-8第三章应用层功能及协议P9-14 第四章OSI传输层P15-20第五章OSI网络层P21-27第六章网络编址-IPv4 P28-34第七章数据链路层P35-40第八章OSI物理层P41-45第九章以太网P46-51第十章网络规划和布线P52-61 第十一章配置和测试网络P62-70 第一学期末考试P71-91文档末尾返回目录第二章网络通信001 TCP/IP 网络接入层有何作用？路径确定和数据包交换数据表示、编码和控制可靠性、流量控制和错误检测详细规定构成物理链路的组件及其接入方法将数据段划分为数据包002下列哪些陈述正确指出了中间设备在网络中的作用？（选择三项）确定数据传输路径发起数据通信重新定时和重新传输数据信号发送数据流管理数据流数据流最后的终止点003下列哪三项陈述是对局域网(LAN) 最准确的描述？（选择三项）LAN 通常位于一个地域内。

此类网络由由一个组织管理。

LAN 中的不同网段之间一般通过租用连接的方式连接。

此类网络的安全和访问控制由服务提供商控制。

LAN 为同一个组织内的用户提供网络服务和应用程序访问。

此类网络的每个终端通常都连接到电信服务提供商(TSP)。

004 什么是PDU？传输期间的帧损坏在目的设备上重组的数据因通信丢失而重新传输的数据包特定层的封装005 OSI 模型哪两层的功能与TCP/IP 模型的网络接入层相同？（选择两项）网络层传输层物理层数据链路层会话层006请参见图示。

所示网络属于哪一类型？WANMANLANWLAN007 以下哪种特征正确代表了网络中的终端设备？管理数据流发送数据流重新定时和重新传输数据信号确定数据传输路径008 第4 层端口指定的主要作用是什么？标识本地介质中的设备标识源设备和目的设备之间的跳数向中间设备标识通过该网络的最佳路径标识正在通信的源终端设备和目的终端设备标识终端设备内正在通信的进程或服务009 请参见图示。

(完整版)计算机网络_第5章习题答案

第五章练习题答案5.1 网络互连有何实际意义？进行网络互连时，有哪些共同的问题需要解决？答：网络互连使得相互连接的网络中的计算机之间可以进行通信，也就是说从功能上和逻辑上看，这些相互连接的计算机网络组成了一个大型的计算机网络。

网络互连可以使处于不同地理位置的计算机进行通信，方便了信息交流，促成了当今的信息世界。

需要解决的问题有：不同的寻址方案；不同的最大分组长度；不同的网络介入机制；不同的超时控制；不同的差错恢复方法；不同的状态报告方法；不同的路由选择技术；不同的用户接入控制；不同的服务（面向连接服务和无连接服务）；不同的管理与控制方式；等等。

注：网络互连使不同结构的网络、不同类型的机器之间互相连通，实现更大范围和更广泛意义上的资源共享。

5.2 转发器、网桥和路由器都有何区别？答：1）转发器、网桥、路由器、和网关所在的层次不同。

转发器是物理层的中继系统。

网桥是数据链路层的中继系统。

路由器是网络层的中继系统。

在网络层以上的中继系统为网关。

2）当中继系统是转发器或网桥时，一般并不称之为网络互连，因为仍然是一个网络。

路由器其实是一台专用计算机，用来在互连网中进行路由选择。

一般讨论的互连网都是指用路由器进行互连的互连网络。

5.3 试简单说明IP、ARP、RARP和ICMP协议的作用。

答：IP：网际协议，TCP/IP 体系中两个最重要的协议之一，IP 使互连起来的许多计算机网络能够进行通信。

无连接的数据报传输. 数据报路由。

ARP（地址解析协议）实现地址转换，将IP地址映射成物理地址。

RARP（逆向地址解析协议）将物理地址映射成IP 地址。

ICMP：Internet 控制消息协议，进行差错控制和传输控制，减少分组的丢失。

注：ICMP 协议帮助主机完成某些网络参数测试，允许主机或路由器报告差错和提供有关异常情况报告，但它没有办法减少分组丢失，这是高层协议应该完成的事情。

IP 协议只是尽最大可能交付，至于交付是否成功，它自己无法控制。

计算机网络课后习题答案(第五章)

计算机网络课后习题答案(第五章)-CAL-FENGHAI.-(YICAI)-Company One1计算机网络课后习题答案（第五章）(2009-12-14 18:28:04)转载标签：课程-计算机?教育第五章?传输层5—01试说明运输层在协议栈中的地位和作用，运输层的通信和网络层的通信有什么重要区别为什么运输层是必不可少的答：运输层处于面向通信部分的最高层，同时也是用户功能中的最低层，向它上面的应用层提供服务运输层为应用进程之间提供端到端的逻辑通信，但网络层是为主机之间提供逻辑通信（面向主机，承担路由功能，即主机寻址及有效的分组交换）。

各种应用进程之间通信需要“可靠或尽力而为”的两类服务质量，必须由运输层以复用和分用的形式加载到网络层。

?5—02网络层提供数据报或虚电路服务对上面的运输层有何影响答：网络层提供数据报或虚电路服务不影响上面的运输层的运行机制。

但提供不同的服务质量。

?5—03当应用程序使用面向连接的TCP和无连接的IP时，这种传输是面向连接的还是面向无连接的答：都是。

这要在不同层次来看，在运输层是面向连接的，在网络层则是无连接的。

?5—04试用画图解释运输层的复用。

画图说明许多个运输用户复用到一条运输连接上，而这条运输连接有复用到IP数据报上。

5—05试举例说明有些应用程序愿意采用不可靠的UDP，而不用采用可靠的TCP。

答：VOIP：由于语音信息具有一定的冗余度，人耳对VOIP数据报损失由一定的承受度，但对传输时延的变化较敏感。

有差错的UDP数据报在接收端被直接抛弃，TCP数据报出错则会引起重传，可能带来较大的时延扰动。

因此VOIP宁可采用不可靠的UDP，而不愿意采用可靠的TCP。

?5—06接收方收到有差错的UDP用户数据报时应如何处理答：丢弃?5—07如果应用程序愿意使用UDP来完成可靠的传输，这可能吗请说明理由答：可能，但应用程序中必须额外提供与TCP相同的功能。

?5—08为什么说UDP是面向报文的，而TCP是面向字节流的答：发送方 UDP 对应用程序交下来的报文，在添加首部后就向下交付 IP 层。