LED3528规格书

合集下载

T10LED灯管规格书三合一3528

产品型号Model
T100.6米
T101.2米
T101.5米
产品名称Beschrijving
T10LED灯管
外形尺寸Afmetingen(mm)
590*∮30mm
1198*∮30mm
1498*∮28 (0.06W/PCS 7-8lm)
产品功耗Opgen.Vermogen
6063铝+PC扩散罩(透光率88%)
6063铝+PC透明罩(透光率93%)
工作温湿度
Werkingstemp en RH
-25℃～45℃、10%～90% R.H.
储存温湿度
Opslagtemp en vochtigheid
-40℃～85℃、0%～95% R.H.
产品净重NetGewicht P/C
190
328
412
Certificaten
CE & ROHS
使用场合Toepassing
商场、超市、工厂、学校、办公室、会议室等
产品优势Product features
更低电力消耗
更持久使用周期
环保
更安全更耐用
86lm/W
86lm/W
87lm/W
工作电压Input Voltage
AC100-240V
工作频率Frequency
50-60Hz
总光通量Lumen Output
780lm±10%
1560lm±10%
1950lm±10%
相关色温CCT(K)：
2700K-6500K
显色指数CRI
≥72
发光角度Lichthoek2θ 1/2
120
光通量维持率
Licht flicker ratio

（完整版）3528灯带规格书

（完整版）3528灯带规格书3528软灯条规格书1．规格：1、采用高亮度SMD3528 LED灯珠， FPC板，每三个或六个LED 为一段。

2、每条的标准长度为5M，每条灯珠数量分别有60PCS/M LED 灯珠，120PCS/M LED灯珠3、发光颜色：白/暖白颜色可供选择4、工作电压：DC12V/DC24v5、防水型SMD灯条：套管（IP65）、滴胶（IP65）、套管滴胶IP68）用途：1、SMD贴片软灯带适用于酒店，超薄灯箱，KTV娱乐场所等室内装饰。

2、用于广告招牌等精品装饰领域。

3、度假装饰照明灯，显示及展览。

4、商场专柜，珠宝，首饰台及名贵钟表柜台。

2．产品参数3528灯条白60LED 120°12V 4.8W 5米/卷型号不防水表面滴胶防水硅胶套管防水套管灌胶防水尺寸（MM）L5000*W10*H2 L5000*W10*H4 L5000*W11*H4 L5000*W12*H6 主要材料FPC柔性线路板FPC柔性线路线+环氧树脂FPC柔性线路板+硅胶套管FPC柔性线路板+套管+环氧树脂防水等级IP20 IP65 IP66 IP68透光率100% 85%-90% 90%-95% 80%-85%使用温度/湿度-20Co--50Co/50RH -10Co--60Co/60RH-20Co--60Co/80RH-20Co--60Co/100RH使用范围室内室内外，可淋水室内外，可淋水或浸泡室内外，可长时间浸泡水里色温暖白：2800-3500K，正白：6000-6500K，RGB 3．线路图及安装图4.产品安装注意事项（1）LED产品对静电很敏感，安装使用过程中请注意防止静电，防止因静电造成LED击穿从而导致死灯不亮，请勿用锐器去按压LED 表面，（2）不可将灯条直接插入110V-220V使用，否则会烧坏灯条，灯条需使用单独电源，电源功率可根据使用灯条的总功率及灯条连接的长度而定。

（3）产品安装时折弯和要避免刚好在LED或其他元器件的位置以免造成元器件脱落面损坏产品。

华宏光电子(深圳)有限公司 3528单晶蓝光贴片产品说明书

产品规格书Specification3528单晶蓝光贴片3528 Single Chip Blue Color Top LED产品型号/ Part No : WW-BNA30TS-Q1批准审核制定牛焕东陶源杨成琼华宏光电子（深圳）有限公司WAH WANG OPTOELECTRONIC (SHENZHEN)COMPANY LIMITED地址:深圳市宝安区大浪街道华荣路联建科技工业园第五栋Address：Floor Block 5, Lianjian Science ＆Technology lndustrial Park,Crossing of HuaRong Road,Dalang Sub-District, Bao`an, ShenZhen电话：*************Tel**************传真：*************Fax**************S.D.N. / D.N. No. 送货单编号Customer Name客户名称Sample Approval Signature戶客确认签署Date日期■ 产品特性■ Features：PLCC LED dimensions: 3.5(L) x 2.8(W) x 1.9(H) mm　发散视角120°Wide view angle 120　环保防静电胶带包装Available on tape and reel with Anti-electrostatic bag　产品性能稳定可靠Compatible for all SMT Assembly and Lead-Free SolderingRoHS Compliant■ 应用■ Applications：　背光液晶开关和显示Backlight for LCD Switch and Display　装饰照明Decorative Lighting　一般照明General Lighting　汽车内部照明Automotive Interior Lighting　常规使用General Use■ 产品尺寸图■ Package Dimensions：2建议焊盘尺寸■ 注释■ Notes ：1、上图所有尺寸的单位为毫米All dimension units are in millimeters.2、所有外形尺寸公差为 ± 0.25毫米，除非另有说明All dimension tolerances are ± 0.25mm unless otherwise noted.■ 最大绝对额定值■ Absolute Maximum Ratings ：参数Parameter 符号 Symbol 数值 Value单位 Unit 功耗Power dissipation P d 60 mW 连续正向电流I F 20 mA 峰值正向电流 Peak Forward CurrentI FP 50 mA 反向电压 Reverse Voltage V R5V静电放电(HBM)ESD 1000 V 工作温度范围T opr -25 to +85 ℃ 存储温度范围T stg -40 to +100 ℃ 无铅焊接温度T sol260( for 5 sec)℃Recommended Soldering Pads Dimensions Recommended Soldering Pads Dimensions光电参数规格：Electrical Optical Characteristics:WW-BNA30TS-Q1注释Notes:1、发光强度、功耗和光通量的误差为 ± 10％WW maintains a tolerance of ±10% on flux and power measurements.2、波长的误差为 ±1nm;d ±1nm.3、电压的误差为 ± 0.1VA tolerance of ±0.1V on forward voltage measurements参数 Parameter 符号 Symbol最小值 Min.平均值Typ.最大值 Max.单位 Unit测试条件 Test Conditions发光强度I v 400 --- 600 mcd波长 Spectral λd465 --- 475 nm参考光通量 Φv ------- --- lm 正向电压 V F 2.7 --- 3.3 V 视角Viewing Angle 2θ1/2 ---120 --- Deg I F =20mA反向电流 I R --- --- 5 µA V R = 5V■光电特性Typical Optical Characteristics CurvesAmbient Temperature TA(°C)环境温度(℃)R e l a t i v e L u m i n o u s I n t e n s i t y (%)发光强度(%)Forward Current Derating Curve 环境温度与电流的关系曲线图Radiation Diagram发光角度图Spectral Distribution波长曲线图Luminous Intensity vs AmbientTemperature发光强度与温度的关系曲线图F o r w a r d C u r r e n t (m A )电流(m A )Ambient Temperature TA(°C)R e l a t i v e L u m i n o u s I n t e n s i t y (%)光通量（%）Forward Current (mA)电流(mA)Forward Voltage (V)电压(V)F o r w a r d C u r r e n t (m A ) 电流(m A )Forward Current vs Forward Voltage伏安特性曲线Forward Current vs Relative Luminous Intensity电流和光通量的关系■ 产品可靠性检测项目：序號No.实验项目Test Item标准测试方法Standard TestMethod测试条件Test Conditions检测时间和周期Duration不良数/测试数Failure RateIf=20mA1正常工作寿命Steady StateOperating LifeJEITA ED-4701100 103 Ta=25℃1000hrs 0/22 JEITA ED-47012低温贮藏Low TemperatureStorage 200 202Ta=-40℃ 1000hrs 0/22JEITA ED-47013高温贮存High TemperatureStorage 200 201Ta=100℃ 1000hrs 0/22JEITA ED-4701 Ta=60℃4高温高湿贮藏TemperatureHumidity Storage 100 103 RH=90%1000hrs 0/22JEITA ED-4701 0℃ ~ +100℃5 冷热冲击Thermal Shock 300 307 5min~ 15sec ~5min10 cycles 0/22H：+100℃ 30min.高低温循环Temperature Cycle ∫ : +25℃ 5min.6 JEITA ED-4701100 105L：－40℃ 30min100cycles0/22 JEITA ED-47017 烫锡Solder Heat 300 301 Tsld=260℃, 10sec(Max.)2 times 0/22■ 失效产品判定标准：项目Item符号Symbol测试条件Test Condition最小值Min.最大值Max.正向电压Forward VoltageV F I F = 20mA -- *U.S.L×1.1 反向电流Reverse CurrentI R V R = 5V -- *U.S.L×2.0发光强度Luminous IntensityI V I F = 20mA **L.S.L×0.7 --*U.S.L.:超出标准最大值*U.S.L.: Upper Standard Level** L.S.L.:低于标准最低值** L.S.L.: Lower Standard Level■ .■■■ Dimensions of the reel：■ .包装■ Packing：防潮、防静电真空密封包装■ Moisture, anti-static vacuum sealed packages■ 注释■ Note：上图所有尺寸的单位为毫米，公差为 ± 2.0毫米，除非另有说明All dimensions are in mm, tolerance is ± 2.0mm unless otherwise noted.■注意事项：PRECAUTION IN USE1.存储要求:1.1推荐储存环境温度：5℃30℃的（41oF86oF）湿度：相对湿度60％以下1.2防潮袋密封包装储存时间3个月，起始时间以包装标签日期为准，需在包装袋封口良好并无漏气现象，且湿度卡未变为粉红色前提下使用，如超过3个月的LED需按2. 2要求除潮烘烤后才能正常使用。

P3528(0.2W Q1)系列规格书-欧标

1.1
5
FM-P3528WXS-460Q-R70/R80
焊接指导
1. 手工焊接推荐使用功率低于 20W 的烙铁，焊接时烙铁的温度必须保持在 350℃以下，且每个电极只能进行一次焊接，
每次焊接的持续时间不得超过 3 秒。人手焊接过程中的不慎操作易引起 LED 产品的损坏，应当小心谨慎。
2. 回流焊接推荐使用以下无铅回流焊接温度图进行。
5. 外力
LED 的封装胶部分相当脆弱，请勿用坚硬、尖锐的物体刮、擦封装胶部分。直接用手拿取产品不但会污染封装树脂表面，也可能由于静电等因素导致产品性能的改变。在用镊子夹取的时候也应当小心注意，过度的压力也可能直接影响封装内部的管芯和金线，因此请勿对产品施加过度压力，特别当产品处于高温状态下，例如在回流焊接过程中。
产品描述本产品具有垂直散热结构设计，散热性能良好，可靠性高，寿命长，同时具有高光效，高显色指数，低功耗，大发光角度等优点，特别适用于 LED 日光灯管、球泡灯、筒灯等照明产品。
目录
电性参数............................................ 1 典型特性曲线.................................... 2 可靠性实验........................................ 3 外形尺寸............................................. 4 包装.................................................... 5 焊接指导............................................. 7 使用注意事项…………………………......... 8 分档…................................................. 10

华旺光电子Warm White色顶LED单片机3528型号说明书

WAH WANG HOLDINGS (HONG KONG) CO., LTD.
Factory : WAH WANG OPTOELECTRONIC (SHENZHEN) CO LTD.
Specification
For 3528 Single Chip Warm White Color Top LED Part No: WW-WRA30TS-U1
260( for 5 sec)
பைடு நூலகம்
℃
Electrical Optical Characteristics at Ta=25℃
Parameter
Symbol Min. Typ. Max. Unit
Test Condition
Luminous Intensity Ref. Luminous Flux
Viewing Angle
Iv1 2100 --- 3000 mcd
Φv1
7.5
8.5
---
lm
2θ1/2 --- 120 --- Deg
IF = 20mA(Note 10) IF = 20mA IF = 20mA
Forward Voltage
VF1
2.8
---
3.4
V
IF = 20mA
Luminous Intensity
Iv2 3000 --- 4000
Symbol
Value
Unit
Power dissipation
Pd
60
mW
Continuous Forward Current
IF
20
mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)

led3528蓝光贴片灯珠最新规格书

3528蓝光规格书3528 BLUE SPECIFICATION 产品型号 Model NO.:HT-K3528BC版次 REV NO.:V01版文件编号Document NO.:YT-DG201303日期 DATE :2013.3.041.外形尺寸D imensions单位(Units):毫米(mm)2.光电特性Electrical / Optical characteristics1/10周期, 0.1 msec脉宽IFP Conditions : 1/10 Duty Cycle, 0.1 msec Pulse Width.½ Rja = Heat resistance from Dice to Ambient temperature (Ta) Rjs = Heat resistance from Dice to Solder temperature of Cathode Side (Ts) (3) 原始光电参数Initial Electrical/Optical Characteristics (TA=25ºC)(4)发光强度范围Luminous Intensity Ranking (TA=25ºC)允许误差± 10%Luminous Intensity Measurement allowance is ± 10%.(5)颜色范围Color Ranking (TA=25ºC)允许误差± 0.01Color Coordinates Measurement allowance is ± 0.01.3.包装PACKAGING(1)LEDS在装带之后纸箱包装. The LEDs are packed in cardboard boxes after taping.(2)装带规格Taping Specifications (单位:毫米Units:mm)(3)卷轴尺寸Reel Dimension装带数量2000个/卷2000Pcs/Reel(3) 最小包装标签注明以下:产品名称.批号.光电范围.数量.The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity.(4)请注意防水防潮Keep away from wate r, moisture in order to protect the LEDs.(5) 须采取适当防护措施,以防包装箱跌落或受到强力撞击造成对产品的损伤.The LEDS may be damaged if the boxes are dropped or receive a strong impact against them. so precautions must be taken to prevent any damage.4.可靠性RELIABILITY5.注意事项Cautions(1) 焊接条件Soldering Conditions本产品最多只可回焊两次,且在首次回焊后须冷却至室温之后方可进行第二次回焊.Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process. 推荐焊接条件(Recommended soldering conditions)有铅回焊（Lead Solder ）无铅回焊(Lead-Free Solder)推荐焊盘式样(Recommended Soldering Pattern ) 单位:毫米( Units:mm)(2)静电 Static Electricity触摸LED 时,推荐使用防静电手腕带或防静电手套.It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. 所有装置、设备、机器均应接地.All devices, equipment and machinery must be properly grounded.静电损坏的LED 会显示出异常特征:正向电压变低或在低电流时死灯.标准: I F =0.5mA 时, V F > 2.0VDamaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (V F > 2.0V at I F =0.5mA)(3)防潮包装Moisture Proof Package使用防潮包装It is recommended that moisture proof package be used .(4)储藏Storage打开包装袋之前,LED在温度为30°C或更低湿度70%RH以下,可保存一年.Before opening the package ,The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be used within a year.（5）打开包装之后,应在24hrs 内焊接完毕.After opening the package, The LEDs should be soldered within 24 hours (1days) after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with packages of moisture absorbent material (silica gel).下列情况发生时，须要在焊接前重新烘烤60 ± 5°C,24小时以上。

led3528绿光贴片灯珠最新规格书

东莞市荧月电子科技有限公司3528绿光规格书3528 GREEN SPECIFICATION产品型号 Model NO.:YT-K3528GC版次 REV NO.:V01版文件编号Document NO.:YT-C030002日期 DATE :2015.3.11.外形尺寸D imensions单位(Units):毫米(mm)2.光电特性Electrical / Optical characteristics1/10周期, 0.1 msec脉宽IFP Conditions : 1/10 Duty Cycle, 0.1 msec Pulse Width.Rjs = Heat resistance from Dice to Solder temperature of Cathode Side (Ts) (3) 原始光电参数Initial Electrical/Optical Characteristics (TA=25ºC) Array(4)发光强度范围Luminous Intensity Ranking (TA=25ºC)允许误差± 10%Luminous Intensity Measurement allowance is ± 10%.(5)颜色范围Color Ranking (TA=25ºC)允许误差± 0.01Color Coordinates Measurement allowance is ± 0.01.3. 包装PACKAGING(1)LEDS 在装带之后纸箱包装. The LEDs are packed in cardboard boxes after taping.(2)装带规格Taping Specifications (单位:毫米Units:mm )(3)卷轴尺寸 Reel Dimension装带数量2000个/卷2000Pcs/Reel(3) 最小包装标签注明以下:产品名称.批号.光电范围.数量.The label on the minimum packing unit shows ; Part Number, Lot Number, Ranking, Quantity.(4)请注意防水防潮Keep away from wate r, moisture in order to protect the LEDs.(5) 须采取适当防护措施,以防包装箱跌落或受到强力撞击造成对产品的损伤.The LEDS may be damaged if the boxes are dropped or receive a strong impact against them. so precautions must be taken to prevent any damage.4.可靠性RELIABILITY*) U.S.L.：Upper Standard Level **) L.S.L.：Lower Standard Level5.注意事项Cautions(1) 焊接条件Soldering Conditions本产品最多只可回焊两次,且在首次回焊后须冷却至室温之后方可进行第二次回焊.Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process. 推荐焊接条件(Recommended soldering conditions)推荐焊盘式样(Recommended Soldering Pattern ) 单位:毫米( Units:mm )(2)静电 Static Electricity触摸LED 时,推荐使用防静电手腕带或防静电手套.It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.所有装置、设备、机器均应接地.All devices, equipment and machinery must be properly grounded.静电损坏的LED会显示出异常特征:正向电压变低或在低电流时死灯.标准: I F=0.5mA时, V F > 2.0VDamaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (V F > 2.0V at I F=0.5mA)(3)防潮包装Moisture Proof Package使用防潮包装It is recommended that moisture proof package be used .(4)储藏Storage打开包装袋之前,LED在温度为30°C或更低湿度70%RH以下,可保存一年.Before opening the package ,The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be used within a year.（5）打开包装之后,应在24hrs 内焊接完毕.After opening the package, The LEDs should be soldered within 24 hours (1days) after opening the package. If unused LEDs remain, they should be stored in moisture proof packages, such as sealed containers with packages of moisture absorbent material (silica gel).下列情况发生时，须要在焊接前重新烘烤60 ± 5°C,24小时以上。

Led单色低压柔性灯带3528-60D规格书

产品规格书产品名称：Led低压柔性3528灯带产品型号：TPL-3528-12V-5M-60D 制作日期：地址：电话：传真：一、产品介绍LED柔性软灯带是采用特制的PVC塑料以及超高亮度发光二极管(LED)，运用特有的专利技术生产出来的。

它是经过多次挤押成型有连续发光效果的新型塑料软管灯。

它结合了LED使用寿命长、节能省电，双重绝缘外观安全、色彩丰富、超高亮度、固态冷光源、绿色环保，以及塑料软管灯的柔性易弯曲、安装造型方便、抗冲击不易破碎、方便运输、防水抗紫外线等优点，成为上个世纪发明并延用至今，是传统节日灯饰的理想替代品本产品能够显示柔和的灯光效果，可安装在凹处，墙壁、走道等上千种你所能想象得到的地方。

本产品高雅绮丽,近来广泛应用于建筑物装饰，造型灯饰和各种户外装饰，如酒店、酒吧、楼道、商场、西餐厅、博物馆、展览管、门楼招牌、库房、办公室、居家室内照明、桥梁、楼宇户外气氛营造等工程场合安装示意图五、产品的配件六、安装注意事项1.每条灯带均接有整流桥堆和插头，只需要将插头插入插座内即方便使用。

使用前要明确产品功率，确保电源不超负荷。

电路要有保护器，如电源要带有保险丝或者漏电开关。

使用时请参照技术参数，确保电压参数在±5%范围内。

2．不要将灯带连续性的扭曲，多次连续性扭曲容易造成内部电路线损伤。

灯带在户外应做好防护措施，以免造成火灾、点击和人身伤害。

3．为了保证产品的寿命，建议在使用的过程中不要用力拉扯电源线，禁止碰撞和用力挤压灯珠表面。

4.如发现有破损的地方可以剪去一个单元，以免引起危险。

5．当灯带还是整卷、堆成团或者还没有拆开包装时，请勿通电。

6.安装时先将灯带两端主电线的毛刺用剪切工具剪干净，以免造成短路。

7.请勿在安装的过程中接通电源，只有在接驳、安装以及固定好之后方可接通电源。

8.在安装过程中，不能用铁丝金属材料扎灯带，以免造成扎进灯带内造成短路、漏电、破损灯带等。

9.LED有正负极之分，接反会不亮，在安装接驳时要认真区分正负极，以免接错损坏产品。

3528灯珠，3528灯珠参数，3528贴片led灯珠参数有哪些？

3528灯珠，3528灯珠参数，3528贴片led灯珠参数有哪
些？
3528灯珠，3528灯珠参数，3528贴片led灯珠参数有哪些？
3528灯珠规格书，3528灯珠正负极，3528贴片led灯珠功率是多少?
在LED灯珠的应用中，3528灯珠，5050灯珠，2835灯珠多少伏，都是经常问到的参数问题。

了解3528灯珠参数，正负极，对于LED的应用及选型，都是有很大好处的。

但是，因为3528灯珠有单色，双色，三色等多个系列，所以，LED灯珠的参数就会有很多种。

所以，如果你需要3528灯珠特别亮度或光色，波长的）
3528灯珠参数
3528灯珠参数包括：3528红光、3528黄光、3528橙光，3528蓝光，3528绿光，3528紫光，3528暖白光，3528正白光，3528冷白光等光色参数。

3528灯珠的功率是0.06w。

3528灯珠每盘的包装是2000pcs.
3528灯珠有单色灯珠，双色灯珠和三色灯珠。

3528七彩灯珠有4脚和6脚的2种类型灯珠。

3528贴片led灯珠参数
3528灯珠参数图
3528灯珠正负极，3528灯珠规格书
更多的3528灯珠规格型号，电流，电压、参数，可以参考3528灯珠规格书，可以申请样品免费测试。

3528贴片规格书

中之光电科技有限公司ZT3528W0S1-****(0.06W)规格书3.5 mm SMD Hyper White Top LED 3.5 mm 贴片超亮白色发光二极管Features 特征• Package Size ：3.5 (L) ×2.8(W) × 1.2 (T) mm封装尺寸： 3.5 (长) ×2.8 (宽) ×1.2 (厚) mm •Silicone Packed 采用硅胶封装•Super long lifetime超长寿命 •Anti UV 防紫外线•White colors are available in(1800K-15000K) 可供白光(1800K-15000K) •High CRI products 高显色性产品 •Wide viewing angle (2θ1/2=120°) 宽角度 (2θ1/2=120°)Applications •产品应用•Indoor lighting : Fluorescent lamp, tube •室内照明：日光灯管、灯条•Commercial illumination and displays : •商业照明显示：广告字、广告灯箱 Advertising words, light box•LCD Backlighting •LCD 背光源•Decorative lighting : light strip •装饰照明：柔性灯条•Automotive interior auxiliary lighting •Other illumination and displays •其它照明和显示类OOTop View 顶视Side View 侧视OOBin Range of Forward Voltage电压等级代码(at I F = 20 mA, T a = 25 O C )Part No. Description产品型号说明Color Bin Limit色度代码;(at I F = 20 mA, T a = 25 O C )Color Bin色坐标常用BIN区(Common Bin)可选BIN区（Optional Bin）Typical Electro-Optical Characteristics Curves 典型光-电特性曲线图Solder Pad一、PRECAUTONS IN USE LED/使用LED注意事项；LED Soldering condition/ LED焊接条件；1：烙铁焊接：烙铁最高30W尖端温度不超过300℃；焊接时不超过3秒；Manual soldering：iron Maximum 30W，iron bit temperature can not over 300 degree；soldering time should not be more than 3 seconds；Cleanout/清洗；当用化学品清洗LED胶体时须特别小心，因为有些化学品对胶体表面有损伤并引起褪色如三氯乙烯、丙酮，可用乙醇擦拭浸渍，时间在常温下不超过2分钟。

3528正白规格书下载

产品规格书 SPECIFICATION产品型号Model . P/N NO ：JT-K1210QWY S/N NO ：文件编号Document . NO ：版次 REV NO ：V3.0描述Description:■ 3.5×2.8mm 贴片发光二极管3.5×2.8mm Top SMD ■ 胶体颜色Colloid Color: 黄色 Yellow ■ 发光颜色Emission Color: 白色White ■ 半功率角度Viewing Angle :120°1.外形尺寸D imensions单位(Units):毫米(mm)123528单晶焊盘图注意:所有尺寸单位为mm ，如无特殊说明误差范围为±0.1mm All dimensions area in mm tolerance is ±0.1mm unless otherwise noted.2.光电特性Electrical / Optical characteristics1/10周期, 0.1 msec脉宽IFP Conditions : 1/10 Duty Cycle, 0.1 msec Pulse Width.(2)样品光电参数Initial Electrical/Optical Characteristics (TA=25±5ºC)(3) 色区(BCD)标志区是出货区域，红色曲线是黑体轨迹线（4）色温标准分档（5）光通量标准分档0.5 LM/档（6）电压标准分档0.1V/档色座标(IF=20mA,Ta=25℃)正向电压允许误差± 0.05V Tolerance of measurement of Vf is ±0.05 V..光通量允许误差±0.2lm Luminous Intensity Measurement allowance is ±0.2lm 色温误差范围±100k Colour Temperature Measurement allowance is ±100k 显色指数允许误差±1 Color Rendering Index Measurement allowance is ± 1.3特性曲线Characteristic curve相对亮度与波长之间的关系4.可靠性RELIABILITY5.注意事项Cautions(1) 焊接条件Soldering Conditions本产品最多只可回焊两次,且在首次回焊后须冷却至室温之后方可进行第二次回焊.Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process. 推荐焊接条件(Recommended soldering conditions)有铅回焊（Lead Solder ）无铅回焊(Lead-Free Solder)(2)静电 Static Electricity触摸LED 时,推荐使用防静电手腕带或防静电手套.It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. 所有装置、设备、机器均应接地.All devices, equipment and machinery must be properly grounded.静电损坏的LED 会显示出异常特征:正向电压变低或在低电流时死灯.标准: I F =0.5mA 时, V F > 2.0VDamaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (V F > 2.0V at I F =0.5mA) (3)防潮包装Moisture Proof Package 使用防潮包装It is recommended that moisture proof package be used . (4)储藏Storage打开包装袋之前,LED 在温度为30°C 或更低湿度70%RH 以下,可保存一年. Before opening the package ,The LEDs should be kept at 30°C or less and 70%RH or less. The LEDs should be used within a year.（5）打开包装之后,应在24hrs 内焊接完毕.After opening the package, The LEDs should be soldered within 24 hours (1days) after opening the package.(6)使用注意事项Cautions:6.1.在开包装之前，请先检查包装袋有无漏气，如果有漏气现象，请退回我司重新烘烤除湿包装后再使用。

贴片LEDSMD支架3528规格书

■ 电镀银膜厚：功能区≥80 U”，非功能区≥30 U”
地址：广东省中山小榄镇民安南路 45 号之二
电话：0760-2214 3311
传真：0760-2218 5055
-----------------------------------------------------------------------第 1 页共 6 页--------------------------------------------------------------------
rizho 机械性质
物理性质
.led 支架脚位数
2 引脚
发光角度
120 度
w 可焊接晶片数 1（单晶）
塑胶用途级别
高温注塑级树脂
ww 电镀规格
全镀银
塑胶熔点
300～310℃
中电镀膜厚
功能区≥80 U”,非功能区≥30 U” 引线框架抗拉强度
380（kgf／平方毫米）
中山日破坏性检验：
检验项目金属与树脂粘合度
中山日中照明有限公司
R3528-A1-1018 外形图
产品型号： R3528-A1-1018 文件编号： R-20110721-02 版本编号： A02
中山日中
说明：以上所有尺寸单位为 mm，如无特殊说明误差范围±0.05mm。
-----------------------------------------------------------------------第 3 页共 6 页--------------------------------------------------------------------
PPA 树脂变色 PPA 树脂与引线框架变形

T5一体化LED灯管三合一规格书-3528

Certificaten
CE & ROHS
使用场合Toepassing
展厅、展柜、生产线、机柜、设备照明等
产品优势Product features
1.采用台湾高亮度晶电芯片，3528封装，亮度与散热更好。
2.外观新颖大方，将支架与灯体融为一体。节省支架成本。同时增加散热面积，延长LED使用寿命。
3.安装方面，可使用连接头直接将灯管串联起来。
86lm/W
86lm/W
87lm/W
工作电压Input Voltage
AC100-240V
工作频率Frequency
50-60Hz
总光通量Lumen Output
780lm±10%
1560lm±10%
1950lm±10%
相关色温CCT(K)：
2700K-6500K
显色指数CRI
≥72
发光角度Lichthoek2θ 1/2
6063铝+PC扩散罩(透光率88%)
6063铝+PC透明罩(透光率93%)
工作温湿度
Werkingstemp en RH
-25℃～45℃、10%～90% R.H.
储存温湿度
Opslagtemp en vochtigheid
-40℃～85℃、0%～95% R.H.
产品净重NetGewicht P/C
产品型号Model
T5 2尺
T5 4尺
T5 5尺
产品名称Beschrijving
T5一体化LED灯管
外形尺寸Afmetingen(mm)
600*27*34mm
1200*27*34mm
1500*27*34mm
封装形式LED Chip

3528贴片灯珠具体规格参数如下

3528贴片灯珠具体规格参数如下：
1. 【产品名称】：LED3528红光贴片
2. 【电压】：2.0-2.2V
3. 【电流】：20MA
4. 【功率】：0.06W
5. 【产品尺寸】：3.5*2.8*1.9MM
6. 【芯片厂家】：三安
7. 【亮度】：600-780MCD 780-1000MCD
8. 【波长】：620-625NM
9. 【使用寿命】：＞50，000个小时
产品特征：发光角度大，广泛应用于日光灯、面板灯、球泡灯、吸顶灯、天花灯、背光、指示产品等
主要材质：硬硅胶封装（进口日本信越=保证低光衰，防硫化）金线焊接（北京达博=纯金99.99%金线焊接）
特点：体积小、角度大，亮度高、低电压驱动
包装：真空包装2000/PCS/盘
焊接方法：适应于所有的SMT贴片式焊接。

产品应用：手机按键灯、车载指示灯、仪器仪表指示灯、手机背光源、LED显示屏、MP3背光源、液晶显示屏，背光源、户外看板、背光源产品、电器产品指示、汽车仪表、影音设备、车载DVD、智能水表、电表。

MP3、MP4、MP5、蓝牙、特种照明、交通信号灯、室内照明、工业照明、广告语标示等
LED3528红光贴片，3528红光贴片，3528红光贴片灯珠，3528红光灯珠，3528红光LED，SMD3528红光灯珠，SMD3528红光,3528红光LED，3528红光价格，深圳3528红光厂家，3528红光LED灯珠，LED3528红光贴片灯珠，3528红光发光二极管，发光二极管3528红光，发光二极管3528红光贴片灯珠，LED3528红光贴片厂家,LED3528红光厂家直销，LED3528红光价格优势，3528红光供应商，贴片3528红光灯珠。

Wah Wang 3528单片绿色顶LED数据手册说明书

Wah Wang Data SheetFor 3528 Single Chip Green Color Top LEDPart No: WW- GNA30TS-CAddress :Unit 03B, 18th Floor, Nanyang Plaza,No.57 Hung To Road, Kwun Tong,Kowloon, Hong KongTel :852-2512 9939 (10 line)2398 Fax :852-2344 Web Site :S.D.N. or D.N. No. :SN100350Customer Name :Mectronic s.r.l.Sample Approval Signature :Date :Wah Wang Data SheetTechnical Datasheet3528 is thermal management characteristic is betterthan other LED Solutions. By package SMD designand good thermal emission material.According to these advantages, it enables to apply various lighting applications and design solution, automotive lighting, and large size LCD backlight etc.Application• Mobile phone flash• Automotive interior / exteriorlighting• Automotive signal lighting• Automotive forward lighting• General Torch• Architectural lighting• LCD TV / Monitor Backlight• Projector light source• Traffic signals• Task lighting• Decorative / Pathway lighting• Remote / Solar poweredlighting• Household appliancesFeatures1. PLCC LED dimensions: 3.5(L) x2.8(W) x 1.9(H) mmintensity2.HighwideangleviewExtremely3.packagetape4.Anti-electrostatic5. Reliable and stablePart No. WW-GNA30TS-C Emitting Color GreenAbsolute Maximum Ratings at Ta=25℃Unit Parameter MAX.Peak Forward Current50 mA(1/10 Duty Cycle, 0.1ms Pulse Width)Continuous Forward Current 20 mAReverse Voltage 5 V℃5℃Operating Temperature Range -25 to +8℃100℃Storage Temperature Range -40 to +℃ 3 SecondsLead Soldering Temperature 260 forElectrical Optical Characteristics at Ta=25℃TestConditionMin.Typ.Max.UnitParameter SymbolLuminous Intensity Iv 600 800 --- mcd I F = 20mA (Note 8)Wavelength λ515 --- 525 nm I F = 20mAViewing Angle 2θ1/2 --- 120 --- Deg I F = 20mAForward Voltage V F 2.8 ---3.6 V I F = 20mAµA V R = 5VReverse Current I R --- ---10Notes:1.All dimensions are in millimeter. Tolerance is ±0.25mm(.01”) unless others otherwise noted.2. WW maintains a tolerance of ±10% on flux and power measurements.T ±5% tester tolerance and λd ±1nm4.A tolerance of ±0.1V on forward voltage measurements5.View Angle maintains a tolerance of ±20°6.Specifications are subject to change without notice.7.These products are sensitive to static electricity; high standard of care must be fully taken when handlingthem. Particularly if an over-voltage that exceeds the Absolute maximum Rating of these products wereapplied, the overflow energy will cause damage to and possibly result in destruction of these products.Buyer shall take absolute secure countermeasures against static electricity and surge when handlingthese products.8.Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.9.It use many parameters that correspond to the CIE 1931 2°X,Y, and Z are CIE1931 2°values of Red, Green and Blue content of the measurement.* Caution1. Please do not drive at Peak Forward Current more than 5 sec.Reliability:1) Test Items and Results No. Test ItemStandard Test MethodTest ConditionsNoteNumber of DamagedIf=20mA 1 Steady State Operating LifeTa=25℃ 1000hrs 0/22 JEITA ED-47012 Low TemperatureStorage 200 202 Ta=-40℃ 1000hrs 0/22 JEITA ED-47013 High TemperatureStorage 200 201 Ta=100℃ 1000hrs 0/22 JEITA ED-4701Ta=60℃ 4Temperature Humidity Storage100 103 RH=90% 1000hrs 0/22JEITA ED-47010℃ ~ +100℃5 Thermal Shock300 307 5min~ 15sec ~ 5min 10 cycles 0/22H ：+100℃ 30min.Temperature Cycle∫ : +25℃ 5min. 6JEITA ED-4701100 105 L ：－40℃ 30min 100 cycles 0/22JEITA ED-47017 Solder Heat 300 301Tsld=260℃, 10sec(Max.)2 times 0/22Failed ConditionsItemSymbolTest ConditionMinMaxForward Voltage Vf If =20mA -- U.S.L*)×1.1Reverse Current Ir Vr =5V -- U.S.L*)×2.0 Luminous Intensity Iv If =20mA L.S.L**)×0.7 --*U.S.L.:Upper Standard Level ** L.S.L.:Lower Standard LevelTypical Characteristics Typical Electrical/Optical Characteristic Curves℃(25Dimensions for TapeDimensions for ReelNotes:1.All dimensions are in mm, tolerance is±2.0mm unless otherwise noted.2.Specifications are subject to change without notice.PRECAUTION IN USE StorageRecommended storage environmentTemperature: 5o C ~ 30o C (41o F ~ 86o F) Humidity: 60% RH Max.Use within 7 days after opening of sealed vapor/ESD barrier bags. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. Fold the opened bag firmly and keep in dry environment.SolderingA. Reflow ProcessReflow SolderingLead Solder Lead – free SolderPre-heat120~150℃ 180~200℃ Pre-heat time 120sec. Max. 120sec. Max.Peak temperature240℃ Max. 260℃ Max. Soldering time 10sec. Max. 10sec. Max. Condition refer to refer toTemperature-Temperature- profile 1 profile 2After reflow soldering rapid cooling should be avoided.[Temperature-profile (Surface of circuit board)] Use the conditions shown to the under figure.＜1 : Lead Solder ＞＜2 : Lead-free Solder ＞M M ax .ax .M ax.ax.B. Manual Soldering ProcessHand SolderingTemperature350℃ Max. Soldering time 3sec. Max. (one time only)a. For prototype builds or small series production runs it is possible to place and solder the LED by hand.b. Dispense thermal conductive glue or grease on the substrates and follow its curing specifications. Gently press LED housing to closely connect LED and substrate.c. It is recommended to hand solder the leads with a solder tip temperature of 280°C for less than 3 second, at a time with a soldering iron of less than 25W. Solder at intervals of two seconds or more.d. Take caution and be aware that damaged products are often a result of improper handsoldering technique.Cleaning :The conditions of cleaning after soldering:An alcohol-based solvent such as lsopropyl Alcohol(IPA) is recommended. Temperature Time:<50℃*30sec,or <30℃*3minUltra sonic cleaning:<15W/bath; Bath volume:1liter max. Curing:100 max,<3minCautions of Pick and Place:It should be avoided to load stress on the resin during high temperature. Avoid rubbing or scraping the resin by any object.Electric-static may cause damage to the component. Please confirm that the equipment is grounding well. Using an ionizer fan is recommended.Cautions of Design and Applications:It should be done to connect with a current-limiting serial resistor. Avoid to drive reverse voltage over the specifications on LED when ON/OFF. Any application should refer to the specifications of absolute maximum ratings.The dimensions of the recommended soldering pattern may mot meet every user. Please confirm and study first before designing the soldering pattern in order to obtain the best performance of soldering.Do not contact with any component on the assembly board.Static Electricity:These products are so sensitive to static electricity charge so all equipment and machinery must be properly grounded and it is recommended to use a wristband or anti-electrostatic glove when handing the SMD LED.Particularly if any over-current and over-voltage which exceed the AbsoluteMaximum Ratings of LED applied, the more energy may cause damage or possibly result in electrical destruction of the Products.A protection design should be installed in the LED driving circuit, which does not exceed the max. rating for surge current during on/off switching.A tip if soldering iron is requested to be grounded .An ionizer should be installed when risk of static generation is high.If the countermeasures mentioned above are implemented, LED can work well.Users are required to check those countermeasures when problems occur by static electricity chargeOther:Damaged SMD LED will show unusual characteristics such as leak current remarkably low current. Increase, turn-on voltage becomes lower and the SMD LED get unlighted at low current.In automatic mounting of the SMD LEDs on printed circuit boards, any bending and pulling forces or shock against the SMD LEDs shall be kept min. to prevent them from expanding or electrical failures and mechanical damages of the devices. Illustration & ApplicationThe SMD LED taping is much smaller than leaded components, thus enable smaller size, applications, etc. higher packing density, reduced storage space and finally smaller equipment board to be obtained. Besides, lightweight makes them ideal for miniatureThe products described in this brochure are intended only for standard applications or general electronic equipment such as :1. Telecommunication: indicator and backlight in telephone and fax.2. Automotive: backlight in dashboard and switch.3. LCD: Flat backlight for LCD, switch and symbol.Notes for designing:Care must be taken to provide the current limiting resistor in the circuit so as to drive the Wah Wang LEDs within the rated figures. Also, caution should be taken not to overload Wah Wang LEDs with instantaneous voltage at the turning ON and OFF of the circuit.When using the pulse drive care must be taken to keep the average current within the rated figures. Also, the circuit should be designed so as be subjected to reverse voltage when turning off the Wah Wang LEDs.Storage:In order to avoid the absorption of moisture,it is recommended to solder Wah Wang LEDs as soon as possible after unpacking the sealed envelope.If the envelope is still packed, to store it in the environment as following:(1) Temperature: 5℃ -30℃ (41°F ) Humidity: RH 60% Max.(2) After this bag is opened, devices that will be applied to infrared reflow, vapor-phase reflow, or equivalent soldering process must be:a. Completed within 24hours.b. Stored at less than 30% RH.(3)Devices require baking before mounting, if: (2) a or (2)b is not met.(4) If baking is required, devices must be baked under below conditions: 12 hours at 60℃ ± 3℃。

3528贴片LED灯珠参数介绍

3528贴片LED灯珠参数介绍
3528贴片LED灯珠参数介绍:
3528贴片LED灯珠主要用在：室内照明、商业照明、工业照明领域。

如LED照明产品，LED装饰产品，LED背光产品、灯饰照明、背光源显示（LCD，广告牌）、汽车灯等。

工作电流：IF=（20mA）
3528白光电压3.0-3.4V 发光强度2200-2800(mcd) 光通量6500mlm 角度120°
3528红光电压 1.8-2.4V 发光强度 600-900 (mcd) 光通量2200mlm 角度120°
3528蓝光电压 3.0-3.4V 发光强度 300-500 (mcd) 光通量1000mlm 角度120°
3528黄光电压 1.8-2.4V 发光强度 500-800 (mcd) 光通量2000mlm 角度120°
3528绿光电压3.0-3.4V 发光强度1000-1200(mcd) 光通量3000mlm 角度120°
光衰小：LED工作后，20mA正常连续点亮，亮度会逐渐增加至1500小时左右，亮度增加12%；10000小时，光衰低于25%。

贴片最大可通过电流为500mA，只可以是瞬间，时间不超过2秒，正常15mA，20mA点亮不影响光衰
SMD LED经严格分光分色、亮度均匀一致
高亮度，色区集中，大角度，低热阻，超低光衰工艺，超长寿命。

3528白灯规格书

3528⽩灯规格书Top View LEDs67-21/X2C-BXXXXXXXXX/2T FeaturesP-LCC-2 package.Fluorescence TypeHigh Luminous IntensityHigh EfficiencyPb-free.The product itself will remain within RoHScompliant version.DescriptionsDue to the package design, 67-21 has wide viewing angle, low power consumption and white LEDs are devices which are materialized by combing BlueLEDs and special phosphors. This feature makesthe LED ideal for light guide application.ApplicationsGeneral lightingDecorative and Entertainment Lighting.Indicators.Illuminations.Switch lights.Device Selection GuideChipMaterialEmitted Color Resin ColorInGaNCool WhiteWarm WhiteWater ClearTop View LEDs67-21/X2C-BXXXXXXXXX/2T Product Number Explanation 67–21/X 2 C-B XX XX XX XX XX/2TBin Group of Forward VoltageBin Group of Max. Luminous IntensityBin Group of Min. Luminous IntensityMax. Color temperatureMin. Color temperatureBin Code of Color Rendering Index NotesTable of Color Rendering IndexSymbol DescriptionM CRI(min) : 60L CRI(min) : 70K CRI(min) : 80H CRI(min) : 90Example:67-21/L2C-B45560C2CB2/2TTop View LEDs67-21/X2C-BXXXXXXXXX/2T Mass Production listProduct CRImin.CCT(K)I V(mcd)MinI V(mcd)MaxΦ(lm)Typ.67-21/M2C-B50632C4CB2/2T605000K~6300K20002400 5.78 67-21/M2C-B50638BACB2/2T605000K~6300K16002000 4.86 67-21/M2C-B50634B6BB2/2T605000K~6300K12001600 3.93 67-21/L2C-B4556AC2CB2/2T704500K~5650K18002200 5.39 67-21/L2C-B45566B8BB2/2T704500K~5650K14001800 4.53 67-21/L2C-B45564B6BB2/2T704500K~5650K12001600 3.67 67-21/L2C-B28328BACB2/2T702850K~3250K16002000 4.62 67-21/L2C-B28326B8BB2/2T702850K~3250K14001800 3.88 67-21/L2C-B28322B4BB2/2T702850K~3250K10001400 3.14 Top View LEDs67-21/X2C-BXXXXXXXXX/2TPackage Dimensions2.7±0.2for reflow solding (propose)+PolarityNote : Tolerance unless mentioned is ±0.1mm;Unit = mmTop View LEDs67-21/X2C-BXXXXXXXXX/2T Absolute Maximum Ratings (Ta=25 )Parameter Symbol Rating UnitReverse Voltage V R5VForward Current I F30mA Peak Forward Current (Duty 1/10 @1KHz)I FP100mA Power Dissipation Pd110mW Electrostatic Discharge ESD1000VOperating Temperature Topr-40 ~ +85Storage Temperature Tstg-40 ~ +90Soldering Temperature Tsol Reflow Soldering:260for10sec.Hand Soldering:350for3sec.Electro-Optical Characteristics (Ta=25 )Parameter Symbol Min.Typ.Max.Unit Condition Viewing Angle2θ1/2-----120-----deg I F=20mA Reverse Current I R----------50 A V R=5VTop View LEDs67-21/X2C-BXXXXXXXXX/2T Bin Range of Luminous IntensityBin Code Min.Max.Unit Condition8A600800AB80010002B100012004B120014006B14001600mcd I F=20mA 8B16001800AC180020002C200022004C220024006C24002600Bin Range of Forward VoltageGroup Bin Code Min.Max.Unit Condition34 2.7 2.835 2.8 2.936 2.93373 3.138 3.1 3.2V I F=20mA GB239 3.2 3.340 3.3 3.441 3.4 3.542 3.5 3.643 3.6 3.7Notes:1. Tolerance of Luminous Intensity: ±11%2. Tolerance of Forward Voltage: ±0.05VTop View LEDs67-21/X2C-BXXXXXXXXX/2TBin Range of Chromaticity Coordinates I F =20mACCTBin CodeCIE_x CIE_y CCTBin CodeCIE_x CIE_y 0.31480.3444 0.4312 0.4234 0.3288 0.3569 0.4456 0.4287 0.3290 0.3451 0.4376 0.4116 W50.3160 0.3332 P50.4240 0.4065 0.3160 0.3332 0.4240 0.4065 0.3290 0.3451 0.4376 0.4116 0.3292 0.3313 0.4294 0.3943 6300K ~5650K W60.3175 0.3204 3250K ~3050KP60.4165 0.3890 0.32880.3569 0.4456 0.4287 0.3469 0.3717 0.4614 0.4333 0.3458 0.3592 0.4525 0.4162 V50.3290 0.3451 N50.4376 0.4116 0.3290 0.3451 0.4376 0.4116 0.3458 0.3592 0.4525 0.4162 0.3444 0.3442 0.4436 0.3991 5650K ~5000K V60.3292 0.3313 3050K ~2850KN60.42940.39430.34690.3717 0.3642 0.3829 0.3622 0.3716 U50.3458 0.3592 0.3458 0.3592 0.3622 0.3716 0.35940.35575000K ~4500KU60.3444 0.3442Note: Tolerance of Chromaticity Coordinates: ±0.01Top View LEDs67-21/X2C-BXXXXXXXXX/2T The C.I.E. 1931 Chromaticity DiagramTop View LEDs67-21/X2C-BXXXXXXXXX/2TTypical Electro-Optical Characteristics Curves10Forward Voltage V -(Volts)F10R e l a t i v e l u m i n o u s i n t e n s i t y (%)Ambient Temperature T (°C -601 10-20-400206040)a 100801001000Ambient TemperatureAmbient Temperature T (°C a)Forward Current Derating Curve10F o r w a r d C u r r e n t02030I (m A )5040F 0.70.80.91.01Ta=25°Wavelength λ(nm)100F o r w a r d C u r r e n t 1020I (m A )305040FSpectrum Distribution0.10.30.50.20.480°90°0.650°60°70°40°Radiation DiagramTa=25°Forward Current 1010I (mA)30°FRelative Luminous Intensity vs.Ta=25°f=1KHz Duty=1/10Forward Current Forward Current vs.Forward VoltageRelative Luminous Intensity vs.R e l a t i v e l u m i n o u s i n t e n s i t y (%)R e l a t i v e l u m i n o u s i n t e n s i t y (%)Top View LEDsLabel ExplanationCAT:Luminous Intensity Rank HUE: Chromaticity Coordinates REF:Forward Voltage Rank Reel DimensionsNote : Tolerance unless mentioned is ±0.1mm; Unit = mmTop View LEDs67-21/X2C-BXXXXXXXXX/2T Carrier Tape Dimensions: Loaded Quantity 2000pcs Per Reel.Top View LEDs67-21/X2C-BXXXXXXXXX/2T Reliability Test Items and ConditionsThe reliability of products shall be satisfied with items listed below.Confidence level 90%LTPD 10%No.Items Test ConditionTestHours/CyclesSampleSizeAc/Re1Reflow Soldering Temp. : 260 5Min. 5sec.6 Min.22 PCS.0/12Temperature Cycle H : +100 15min5 minL : -40 15min300 Cycles22 PCS.0/13Thermal Shock H : +100 5min10 secL : -10 5min300 Cycles22 PCS.0/14High TemperatureStorageTemp. : 100 1000 Hrs.22 PCS.0/15Low TemperatureStorageTemp. : -40 1000 Hrs.22 PCS.0/16DC Operating Life I F = 20 mA1000 Hrs.22 PCS.0/17High Temperature / HighHumidity85 / 85%RH1000 Hrs.22 PCS.0/1Top View LEDs67-21/X2C-BXXXXXXXXX/2T Precautions for Use1. Over-current-proofCustomer must apply resistors for protection; otherwise slight voltage shift will cause bigcurrent change (Burn out will happen).2. Storage2.1 Do not open moisture proof bag before the products are ready to use.2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30 or less and 60%RH or less. If unused LEDs remain, it should be stored in moisture proof packages.2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded thestorage time, baking treatment should be performed using the following conditions.Baking treatment: 60±5 for 24 hours.3. Soldering Condition3.1 Pb-free solder temperature profile1~5 °C / Sec.3.2 Reflow soldering should not be done more than two times.3.3 When soldering, do not put stress on the LEDs during heating.3.4 After soldering, do not warp the circuit board.Top View LEDs67-21/X2C-BXXXXXXXXX/2T 4. Soldering IronEach terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.5. RepairingRepair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand。