ASUS USB-BT211 bluetooth receiver Manual说明书

合集下载

Realtek USB Ethernet适配器用户手册说明书

Realtek USB Ethernet适配器用户手册说明书

Under Windows OS, you can read “Realtek USB FE Family Controller” under Network adapter’s catalog of hardware device manager.Note: If you are running Microsoft Windows 7 and XP OS, system will detect a removable storage that includes Ethernet adapter’s driver. Click icon to start driver installation step.Hardware SettingsWindows OSUSB Type-CFast Ethernet AdapterUser Manual• Adapts USB C-Type equipped laptops to enable 10/100Mbps network connection.• Compliant USB Type-C Standard Rev1.0.• Compliant with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX) standards.• Ethernet supports full-duplex and half-duplex operations and Auto MDIX feature.• Supports suspend mode and remote wakeup via link-up and magic packet • Built-in LED to indicate Ethernet operating status.• Easy plug & play and USB bus powered design.• Driver support for Apple MAC, Google Chromebook and Microsoft Windows operation systems.• Certified by Electromagnetic Compatibility (CE, FCC, VCCI, C-Tick, BSMI) and RoHS approval.• CTL1200 - USB Type-C to Fast Ethernet Adapter • User ManualFeaturesPackageSUNIX CTL1200, USB-C to Fast Ethernet Adapter offers a reliable USB Ethernet connection, adding a single RJ45 Ethernet port to a USB Type-C enabled computer system, with support for connecting to 10/100Mbps networks. The compact and portable USB-C to Fast Ethernet Adapter works with Apple MacBook, Google Chromebook, or Windows laptop and offers an ideal laptop accessory that needs network access in an environment lacking wireless capability. With support for features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL), the adapter is suitable for home and business users alike.IntroductionTroubleshootingQ 1. This Ethernet adapter is none-functional?Ans: It may cause by following issues:1). Make sure all cables are firmly and properly connected to the correct port.2). Check LED on the RJ45 connector status. Does “Activity/Link” white LED is active? If not, please check Ethernet wire cable connection is correct.3). Check Ethernet adapter get correct IP from your connected DHCP server. If not, please contact with your technical support to get allowed IP address.Q 2. I am unable to connect to the internet over this Ethernet adapter?Ans: It may cause by following issues:1). Check “Activity/Link” white LED is active on the RJ45 connector. If not, please check Ethernet wire cable connection is correct.2). Check Ethernet adapter get correct network IP address.3). Check network DNS (Domain Name Server) setting is correct. For example, you could use free Google DNS server IP 8.8.8.8.Q 3. May I want be aware of USB-C cable plug direction?Ans: With Type-C, a USB plug's both sides will be the same, allowing for reversible plug orientation. You don't need to worry about plugging it in upside down.Q 4. Does USB to Ethernet adapter support Android OS?Ans: Native Android OS does not include USB-Ethernet controller driver. You may have to contact with your tablet or mobile hardware vendor (e.g. Google, Samsung, or SONY) to get technical support for “Realtek USB Ethernet” solution. We do not support additional Android driver package, because driver has to compile with Android OS kernel in advanced.Scan for detailSUNIX USB Type-C to Fast Ethernet Adapter is driver free under Windows 8 (or above), MAC 10.6 (or above), and Google Chrome operation systems. DHCP (Dynamic Host Configuration Protocol) is the default setting of this Ethernet Adapter; you can set fixed IP address, DNS, Gateway, and other detail setting in the network adapter page.Under Apple MAC X OS, you can read “USB 10/100 LAN” information in the Network setting page.MAC OSCopyrightCopyright© 2014 SUNIX Co., Ltd. All Rights Reserved.No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, photocopying, manual, or otherwise, without prior written permission from SUNIX Co., Ltd.DisclaimerSUNIX Co., Ltd. Shall not be liable for any incidental or consequential damages resulting from the performance or use of this equipment.SUNIX Co., Ltd. makes no representations or warranties regarding the contents of this manual. Information in this manual has been carefully checked for reliability; however, no guarantee is given as to the correctness of this content. In the interest of continued product improvement, this company reserves the right to revise the manual or include change in the specifications of the product described within it at any time without notice and without obligation to notify any person of such revision or changes. The information contained in this manual is provided for general use by the customers.TrademarksSUNIX is a registered trademark of SUNIX Co., Ltd.Other registered marks used herein are for identification purposes only and may be trademarks of their respective owners.E-mailfortechnicalsupport:**************Website for product information: Tel: +886-2-8913-1987Fax: +886-2-8913-1986SpecificationsLED DisplayMade in China 771-CTL120000-S04說明書USB Type-C轉 標準乙太網 轉換器• 透過USB-C介面轉換為標準乙太網介面,透過RJ45接頭連接實體網路。

CD USB接收器固件更新指南说明书

CD USB接收器固件更新指南说明书

Introduction• This document describes the procedure and precautions for upgrading the CD/ USB receiver firmware.• If an error occurs while you are updating the firmware, the CD/USB receiver may become unusable. Be sure to read the following procedure and precautions carefully before updating the firmware.• For basic operations of the CD/USB receiver, refer to the appropriate instruction manual for your model.Target Model and Firmware VersionThe updater can be used for the firmware versions of the models shown below.⁄• For how to check your firmware version, refer to “Checking the Firmware Version”.Work FlowStep 1Download the firmware files, and copy them to USB memory.Step 2Update the firmware. (It takes about 3 minutes.)Reset the CD/USB receiver.Step 3Check that the firmware has been updated.Creating the Update MediaCreate the update media on your PC.1. Download the appropriate updater for the model and firmware version toupdate.2. Copy the updater to the top of hierarchy in USB memory.⁄• You can also copy the updater to a device containing audio files and update the firmware from it.• Update cannot be performed if it is copied inside a folder.• If the updater file name is changed, update cannot be performed.Checking the Firmware Version1. Press the [SRC] button and select “STANDBY” (standby state).2. Press the [VOL] knob to enter the function mode.“FUNCTION”/ “DISPLAY” is displayed.3. Turn the [VOL] knob to display “SYSTEM”, and press the [VOL] knob.4. Turn the [VOL] knob to display “F/W UPDATE”, and press the [VOL] knob.5. Turn the [VOL] knob to display “UPDATE SYSTEM”, and press the [VOL] knob.Current firmware version is displayed.Firmware Update Procedure1. Connect the updater media to the CD/USB receiver.2. When an audio file is played or “NO MUSIC” is displayed, press the [SRC] buttonand select “STANDBY” (standby state).3. Press the [VOL] knob to enter the function mode.“FUNCTION”/ “DISPLAY” is displayed.4. Turn the [VOL] knob to display “SYSTEM”, and press the [VOL] knob.5. Turn the [VOL] knob to display “F/W UPDATE”, and press the [VOL] knob.6. Turn the [VOL] knob to display “UPDATE SYSTEM”, and press the [VOL] knob.7. Press the [VOL] knob again.“FILE CHECK” is displayed.8. Turn the [VOL] knob to display “YES”, and press the [VOL] knob.Update starts with “UPDATING” displayed. Update should finish inapproximately 3 minutes and “COMPLETED” is displayed upon completion.9. The receiver reboots automatically.Update on the firmware takes effect.10. Check that the firmware version is updated, by referring to “Checking theFirmware Version”.⁄• When “NO FILE” is displayed– Check if the updater is on the top of hierarchy.– Check if the updater file name is appropriate for the model to update.• If “WAIT” is displayed more than 5 minutes, you may fail the firmware update. In this case, check the following items– Pull out the USB memory and insert it again.– Check if your USB memory has security function. If so use the one withoutsecurity function.– Your USB memory may have problem. Update with another USB memory.– The firmware is not downloaded and copied to the USB memory successfully.Download and copy it again.Precautions• Be sure to park the vehicle in a safe place before updating. Keep the engine running in order to prevent battery from running out.• Do not turn off the engine or CD/USB receiver power while updating. Update cannot be performed correctly and the CD/USB receiver may become unusable.19TDF_FWverup_en。

Fujitsu usB Bluetooth 2.1 + eDr 设备说明书

Fujitsu usB Bluetooth 2.1 + eDr 设备说明书

Datasheet Fujitsu usB Bluetooth stickDatasheetFujitsu usB Bluetooth stickAccessoriescomFortABle wireless connectivitythe Bluetooth® v2.1 + eDr usB stick is a state of the art Bluetooth® device according to the latest Bluetooth® specification. As a global standard for wireless communication Bluetooth® guarantees the interoperability of devices sharing the same Bluetooth® profile – regardless of the vendor or country of use. Giving you the highest possible data rate (up to 2 Mbps), the Bluetooth® profiles include, beside others, stereo headset, mouse and keyboard and allow data exchange via Active Sync.ReliabilityHighest quality and stabilityCompact and stylish designUsabilitySimply slot in your USB enabled device and start using® wireless technologyBluetoothUSB 2.0 and USB 1.1 compatibleUSB bus powered® technologyEasily connect to other devices with Bluetoothlatest blUetooth® technologyAccess to latest data anytime and anywhere® interconnectionsversatile stick for BluetoothEDR (Enhanced Data Rate) enables transfer rates up to 3 MbitSoftware on CDProviding maximal portabilityEnhance your system connectivityBluetooth Core Specification Version 2.1 is fullybackward-compatible with 2.0/1.2Usb blUetooth sticktechnical specificationssupport to bluetooth Bluetooth 2.1Bluetooth 2.0Bluetooth 1.1transmission power range max. 4 dBm (Class2) - 10 mSupported profiles Generic Access Profile (GAP)Service Discovery Profile (SDP)Serial Port Profile (SPP)Headset Profile (HSP)Advanced Audio Distribution Profile (A2DP) (Stereo Headset)Audio Video Remote Control Profile (AVRCP)Dial Up Networking Profile (DUN)Personal Area Network (PAN)Generic Object exchange Profile (GOEP)Object Push Profile (OPP)File Transfer Profile (FTP)Synchronization Profile (Sync)Human Interface Device Profile (HID)Hard Copy Cable Replacement Profile (HCRP)Basic Image Profile (BIP)Required interface USB 2.1 (USB2.0 compatible)transfer rate USB up to 12 MbitBluetooth™ up to 2 MbitEDR basic: 1 Mbit - GFSKEDR enhanced: 2 Mbit - ∏/4DQPSEDR enhanced: 3 Mbit - 8DPSKMtbf (demonstrated)60.000 hsysteM ReqUiReMentsRequired interface USB 2.1 (USB2.0 compatible)software support (operating system)microsoft® Windows® XPcoMplianceeurope ceUsa/canada Fcc class Bcompliance link https:///sites/certificates/default.aspxDiMensions / Weight / enviRonMentalDimensions (W x D x h)55 x 55 x 8.5 mmWeight 6 g (without calbe or card)operating ambient temperature 5 - 35°Cstorage ambient temperature-15 - 60°Coperating relative humidity20 - 80 %storage/transport relative humidity20 - 80 %electRical valUespower consumption200 mApower supply input 5 vpackage contentBluetooth® v2.1 usB stickCD (includes application and driver)Printed manual and safety instructionsUser and safety instructions in various European languages (German, English, French, Spanish, Italian, Swedish,Norwegian, Finnish)oRDeR coDeS26391-F7137-L1 / EAN: 4333643555153contactFUJITSU Technology Solutions Website: 2010-04-01 CE-ENproject for reducing burdens on the environment.Using our global know-how, we aim to resolveissues of environmental energy efficiencythrough it.Please find further information at http://www./global/about/environment/delivery subject to availability. Any liability thatthe data and illustrations are complete, actualor correct is excluded. Designations may betrademarks and/or copyrights of the respectivemanufacturer, the use of which by third partiesfor their own purposes may infringe the rights ofsuch owner。

Edimax EW-7711UAn V2 USB传输线安装指南说明书

Edimax EW-7711UAn V2 USB传输线安装指南说明书

I.產品資訊I-1. 包裝內容物EW-7711UAn V2USB 傳輸線 安裝指南CD I-2. LED 指示燈號說明I-3. 系統需求- 適用含以下作業系統的個人電腦或筆記型電腦:Windows2000/Vista/7/8/8.1, Mac OS 10.4.x 或以上版本, Linux 。

同時,電腦必須內建USB 插槽(TYPE A)供無線網路卡來使用。

- 硬碟空間: 100MB- CD 光碟槽LED 指示燈II.硬體安裝請先啟動您的電腦,接著將本產品插入您電腦的USB 接埠。

1. 請將工具光碟片直接插入您的Windows 電腦的光碟機內。

您也可自Edimax 官網下載本安裝精靈2. 在Windows 作業系統,本安裝精靈下會自動啟動執行。

如果本包裝隨附CD 不會自動執行,或者如您下載了安裝精靈,Windows 用戶請您前往" Autorun "資料夾, Mac 用戶請前往"Mac"資料夾。

3. Windows 作業系統用戶,請參照下列章節中的說明操作:(MAC 及Linux 用戶,請您參照CD 光碟內附使用手冊中詳細說明)請注意:● 電腦USB 接埠有方向性,需依其方向正確插入網卡!● 部分桌上型電腦的USB 接埠方向會讓插入後的網卡天線朝下,在這種情況下,建議您搭配使用包裝內附的USB 延長底座。

● 插/拔網卡時,也請如上圖示意,抓住本體後再適當插/拔,如不當施力會很容易造成人為損害,影響保固權益。

III. Windows用戶III-1.安裝驅動程式若本包裝隨附CD未自動執行,請點開“Autorun.exe”檔,手動執行自動安裝精靈1.2.接著,請點選“Install Driver”安裝驅動程式。

3.請稍待安裝精靈啟動。

4.接著,請點選”下一步”。

5.請點選”安裝”。

6.驅動程式安裝中,請稍待!7.安裝完成後,請點選”Finish”<完成>。

Sinteso Cerberus PRO MCL-USB适配器(无线)说明书

Sinteso   Cerberus PRO MCL-USB适配器(无线)说明书

Adapter for Siemens FDnet/C-NET devices with MC link for firmware update or to operate the devicesWireless operation possible with all SWING devicesFDnet Spy interfaceMC link cable and USB cable are included in the scope of supplyCompatible with USB 2.0Power supply via USB, no additional supply necessaryLED for status displayThe adapter requires no maintenance and does not need to be calibrated.The MCL-USB adapter (radio) is an interface converter for USB to MC link. It connectsFDnet/C-NET devices to a PC using a serial protocol (MC link). The adapter is used forfirmware updates or in live operation.The MCL-USB adapter (radio) is only compatible with the following devices:Device Cable connection Radio connection Floor repeater terminal FT2010X–Floor repeater display FT2011X–Radio gateway FDCW221X–Radio gateway FDCW241X XRadio manual call point FDM273–XRadio manual call point FDM275–XRadio manual call point FDM275(F)–XRadio fire detector FDOOT271–X Detector exchanger and tester FDUD292X–Intelligent detector tester FDUD293X–Line tester FDUL221X–X = connection possible– = connection not possibleYou need the 'FXS2061 SWING tool' software to connect the devices via radio.FDCW221FDUD292-Amax. 1.5 m2A driver for devices based on TUSB3410 is a mandatory requirement to operate the MCL-USB adapter (radio) FDUZ227 with the 'FXS2061 SWING tool' software.Link to driver and installation instructions:/fduz227-driverThe 'SintesoWorks FXS2002' software or the 'Cerberus-Engineering-Tool FXS7212' isrequired to update the firmware on FDnet/C-NET devices.The FDUZ227 can also be used to establish a connection between the line tester FDUL221and the software PC line tester tool FXS2017.The FDnet Spy interface can be used with the FDnet Recorder software in order to recordFDnet or C-NET data traffic. If required, the FDnet Recorder software can be ordered via theCustomer Support Center.Type Designation Order number Designation Weight MCL-USBadapter (radio)FDUZ227Adapter incl. adaptercable FDUD292-Afor the cableconnection to theFDnet/C-NETdevices and USBcable for theconnection to the PCS54323-F106-A1Adapter incl. adaptercable FDUD292-A forthe cable connection tothe FDnet/C-NETdevices and USB cablefor the connection to thePC0.077 kg Spare part FDUD292-A Adapter cable A5Q00004990Adapter cable0.040 kgDocument ID NameA6V10347735Installation MCL-USB adapter (radio) FDUZ227A6V10227643User Guide SWING-Tool FXS2061008250Technical Manual Line tester FDUL221008164Equipment overview Sinteso™ Detector system FD20A6V10225323Equipment overview Cerberus™ PRO Detector system FD720A6V10348930Driver Installer and Uninstaller for TUSB3410 based devices34Issued bySiemens Switzerland LtdBuilding Technologies Division International Headquarters Gubelstrasse 22CH-6301 ZugTel. +41 41-724 24 24/buildingtechnologies © Siemens Switzerland Ltd, 2013Technical specifications and availability subject to change without notice.Power supply Via USB (5 V)InterfaceUSB 2.0, MC link, FDnet, C-NET, radio CalibrationNoOperating temperature-10…+55 °C Storage temperature-20…+60 °C Air humidity (no condensation permitted) 95 % rel.Dimensions (W x H x D)100 x 30 x 54 mm Protection category (IEC 60529)IP30Dimensional drawings。

USB蓝牙适配器

USB蓝牙适配器

首先大家将买回的蓝牙适配器的驱动程序找到,一般在自带光盘里,将光盘里的蓝牙驱动安装到电脑上,安装之前记得在电脑USB接口插上你的蓝牙适配器,否则安装会失败的。

成功后在桌面上会产生一个“我的 Bluetooth 位置”的快捷方式,双击这个图标,即可进入蓝牙控制面板。

之后点击蓝牙控制面板上的 Bluetooth 菜单,选中高级配置。

进入高级配置后,在本地服务新建串行端口。

勾选上安全连接和自动启动,然后确定。

需要说明的是,在蓝牙控制面板上最初添加串行端口时默认是从com3开始的,你也可以依次添加其它的端口(添加新端口的时候需要将蓝牙适配器从电脑上拔下来才行,否则它只能显示你先前创建的见个端口,而不能另外添加新的端口),在我们小3上默认的接收和发送端口只有com6和com7,你也可以在这里添加上。

但事实上我们只要添加任意一个端口即可建立连接了,仅仅只是连接同步我们就只需要一个端口就足够了。

添加成功后在蓝牙控制面板“我的设备”里就可看到新建的串行端口com3了。

如果该端口未启动,可右击该端口图标,点启用即可。

Z520红外,蓝牙传输详细使用方法红外:也叫红外适配器,我们一般简称为红外,由于安装方便,在传输文件的时候不需要软件就可以直接进行文件传输,而且价格比较便宜,在80元左右,一般的电脑配件市场都可以买到,牌子无所谓,都可以使用,所以深得大家的欢迎,也是目前用来做文件传送最多的一种,由于红外在传送的时候必须要对准红外端口才可以传送,在使用的时候需要注意一下的。

一般现在的笔记本电脑都带红外的,在使用的时候只要进入控制面板把红外打开就可以了,这里说的是台式机和没有红外的笔记本电脑的使用方法。

红外的使用方法:在win98操作系统需要安装驱动(在买的时候一般都附带的),在win2000和XP操作系统下无需安装驱动;(1)、将红外适配器插入电脑上的USB接口,电脑提示找到新硬件—自动安装—提示新硬件可以使用了。

(2)、将Z520的红外打开,对准电脑上的红外适配器,这时在电脑的右下角就会显示“发现附近有另外一台计算机Z520,要发送文件到Z520请单击这里”的字样。

电子科技美工 EW-7822UAD AC12000 Wi-Fi USB 适配器商品说明书

电子科技美工 EW-7822UAD AC12000 Wi-Fi USB 适配器商品说明书

OVERVIEWThe EW-7822UAD is a dual-band 802.11ac USB adapter with the fastest USB 3.0 connectivity that supports MU-MIMO, allowing greater Wi-Fi efficiency. It lets you enjoy HD streaming, online gaming, and surfing simultaneously, without lag or buffering.With the EDIMAX EW-7822UAD AC12000 Wi-Fi USB Adapter, you can improve an older Wi-Fi networking environment to the utmost AC Wi-Fi Standard by plugging this USB adapter into your computer.The EW-7822UAD is certainly a powerful and easy-to-use gadget for upgrading your existing wireless network to the next AC level.EW-7822UADAC1200 Wireless Dual-Band USB AdapterUSB 3.0 Port | Faster than EverUSB 3.0 is up to 10 times faster than USB 2.0 with data transfer rates up to 5Gbps. It’s the latest standard inconnectivity and enables devices to achieve the superfast speeds which 802.11ac can provide – for faster photos, music, videos, and data.Adjustable Antenna | Optimum SpeedThe high-gain antenna of EW-7822UAD is easily adjustable. When the signal is weak, users can adjust the antenna angle to obtain an optimum Wi-Fi performance.11ac MU-MIMO | More StreamsNo more wait time at highest throughput. The latest 11ac MU-MIMO (Multiple User - Multiple Input Multiple Output)technology runs four streams and serve multiple devices simultaneously, for the fastest speeds and uninterrupted Wi-Fi connectivity to all devices.Dual Mode | Double your FunExperience better performance and greater flexibility with EW-7822UAD for your laptop with dual-band connectivity. Either the 2.4GHz or 5GHz frequency band can be selected with top speeds at 300Mbps and 867Mbps respectively. Surf the internet and check emails on the longer-range 2.4GHz band, or use the high-speed 5GHz band for online gaming and YouTube or Netflix HD streaming.FEATURES• Supports Wave -2 compliant MU-MIMO• Supports WPS (Wi -Fi Protected Setup) hardware button for easy connection • Supports WMM QoS feature• MAX. data transfer rate up to 300Mbps (2.4GHz) or up to 867Mbps (5GHz)• Dual -band wireless connectivity for 2.4GHz or 5GHz• Adjustable antenna for optimum Wi-Fi performance1SPECIFICATIONSHARDWAREInterface 1 x USB 3.0 Type AAntenna External Antennas x 2 (2T2R)Dimensions 174.54(L) x 17.69(W) x 14.42(H) mmWeight 15gWirelessStandard • 2.4GHz: IEEE 802.11b, 802.11g, 802.11n •5GHz: IEEE 802.11ac, 802.11a, 802.11nFrequency Band 2.4000~2.4835GHz , 5.150~5.825GHzMaximum Data Speed 11a: 6/9/12/24/36/48/54Mbps;11b: 1/2/5.5/11Mbps; 11g: 6/9/12/24/36/48/54Mbps 11n (20MHz): MCS0-07, up to 144Mbps11n (40MHz): MCS0-07, up to 300Mbps11ac (80MHz): VHTMCS0-9, up to 867MbpsOutput Power 2.4GHz:11b(11M): 11±1.5 dBm , 11g(54M): 9±1.5 dBm11n(20MHz, MCS7): 8±1.5 dBm, 11n(40MHz, MCS7): 8±1.5 dBm5GHz:11a(54M): 8±1.5 dBm, 11n(20MHz, MCS7): 7±1.5 dBm,11n(40MHz, MCS7): 7±1.5 dBm, 11ac(80MHz, VHTMCS9): 5±1.5 dBmReceiver Sensitivity 2.4GHz:11b(11M): -80±2dBm, 11g(54M): -68±2dBm11n(20MHz, MCS7): -66±2dBm, 11n(40MHz, MCS7): -65±2dBm5GHz:11a(54M): -68±2dBm, 11n(20MHz, MCS7): -65±2dBm,11n(40MHz, MCS7): -62±2dBm, 11ac(80MHz, VHTMCS9): -52±2dBmOTHERSCertification CE, FCCEnvironmentalCondition •Operating Temperature: 32~104°F (0~40°C) •Storage Temperature: -4~140°F (-20~60°C) •Operating Humidity: 0~90% (NonCondensing) •Storage Humidity: Max. 95% (NonCondensing)System Requirement •Windows 10•Linux: Kernel 2.6.24 - 5.3 or above (support Fedora & Ubuntu only) •MAC 10.7 or aboveInstallation Easy setup wizard with auto run configurationPackage Content •AC1200 Wirless USB Adapter•Quick Installation GuideAC1200 Wireless Dual-Band USB AdapterMaximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors. Product specifications and design are subject to change without notice. Copyright © 2020 Edimax Technology Co. Ltd. All rights reserved. 2Edimax Technology Co., Ltd No. 278, Xinhu 1st Rd., Neihu Dist., Taipei City, TaiwanEmail:****************.twEdimax Computer Company3444 De La Cruz Blvd., Santa Clara,CA 95054, USAEmail:**************** Edimax Technology Europe B.V.Fijenhof 2, 5652 AE Eindhoven,The NetherlandsEmail:***************EW-7822UAD。

Archer T2U 无线USB适配器使用指南说明书

Archer T2U 无线USB适配器使用指南说明书

User GuideAC600 Mini Wireless USB AdapterArcher T2U©2019 TP-Link REV3.0.0 1910012549ContentsAbout This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Chapter 1. Get to Know About Your Adapter. . . . . . . . . . . . . . . . . . . . . . . 21. 1. Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2. LED Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Chapter 2. Connect to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Chapter 3. Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63. 1. Install Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. 2. Join a Wireless Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. 3. Uninstall Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Chapter 4. Mac OS X. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94. 1. Install Driver and Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4. 2. Join a Wireless Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124. 2. 1. TP-Link Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124. 2. 2. WPS (Wi-Fi Protected Setup). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4. 3. Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4. 4. Uninstall Driver and Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Appendix: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19About This GuideThis guide is a complement to Quick Installation Guide. The Quick Installation Guide instructs you on quick installation, and this guide provides the product overview and detailed instructions for each steps.When using this guide, please notice that features of the adapter may vary slightly depending on the model and software version y ou have. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only.ConventionsIn this guide, the following conventions are used:*Maximum wireless signal rates are the phy sical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of network conditions, AP limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and AP location.*To ensure compatibility, you may need to update the adapter’s drivers after an OS update. You can find our latest drivers in the download center at /en/download-center.More Info• The latest software and utility can be found at h ttps:///download-center.• The Quick Installation Guide (QIG) can be found where you find this guide or inside the package of the product.• Specifications can be found on the product page at https://.• Our Technical Support contact information can be found at the Contact Technical Support page at https:///support.Chapter 1Get to Know About Your AdapterThis chapter introduces what the adapter can do and shows its appearance. This chapter contains the following sections:• Product Overview• LED StatusChapter 1Get to Know about Your Adapter1. 1. Product OverviewTP-Link Wireless USB Adapter connects your computer to a Wi-Fi network for smooth HD video, voice streaming and online gaming.• 256QAM technology increases 2.4GHz data rate from 150 Mbps to 200 Mbps for 33% faster performance• Selectable dual-band connections for lag-free HD video streaming and gaming• Much smaller than a flash drive, enjoy a stable and fast AC600 Wi-Fi wherever you need it• Utilizes 802.11ac standard and is backward compatible with 802.11a/b/g/n• Supports 64/128 bit WEP, WPA-PSK/WPA2-PSK• Supports Windows and Mac1. 2. LED StatusYou can check the adapter’s working status by following the LED Explanation table.Tips:If the LED is off, try these troubleshooting tips:1. Check if the adapter is recognized and enabled or not. Refer to Troubleshooting-T2 for detailed instructions.2. Remove and reinsert the adapter.3. Reinstall the software, if necessary.Chapter 2Connect to a Computer This chapter introduces how to connect the adapter to your computer.Chapter 2Connect to a Computer Before y ou start using y our adapter, insert the adapter into a USB port on y our computer directly.* The image is for demonstration only.After connecting your adapter to the computer, please follow the instructions in the appropriate chapter for your operating system: Windows, Mac OS X.Chapter 3WindowsThis chapter introduces how to install your adapter’s driver, use your adapter to join a wireless network, and uninstall your adapter in a Windows system. The adapter is equipped with a Setup Wizard, which can guide you through the installation process. This chapter includes the following sections:• Install Driver• Join a Wireless Network• Uninstall Driver3. 1. Install Driver1. Insert the resource CD into your CD drive and run the Autorun.exe from the pop-upAutoplay window.Note:1. You can also download the driver or check the new release at https:///download-center.2. In some operating systems, the CD screen will pop up automatically. Otherwise, run the CD manually. 2. Select Archer T2U and follow the instructions to complete the installation.Note:If you can’t install the driver successfully, disable the antivirus software and firewall, then try again.3. When the following screen appears, the driver has been installed successfully.3. 2. Join a Wireless NetworkYou can join a wireless network via Windows built-in wireless utility. Follow the instructions below to use your computer system’s built-in wireless utility:1. Click , or (Network icon) on the taskbar. Select the Wi-Fi network you want to join, and click Connect. Enter the network password when prompted.2. When the network icon changes to or , it indicates a successful network connection.3. 3. Uninstall DriverThe software uninstallation steps vary a bit from different sy stems. Please follow the appropriate instructions for y our Windows operating sy stem: Windows 8/8.1/10, Windows XP/7.• Windows 8/8.1/10Go to Start menu to find the TP-Link application. Click Uninstall TP-Link Archer T2U Driver, then follow the on-screen instructions to complete the uninstallation.• Windows XP/7Go to Start > All Programs > TP-Link > Uninstall TP-Link Archer T2U Driver. Follow the on-screen instructions to complete the uninstallation.Chapter 4Mac OS XThis chapter introduces how to install your adapter’s driver and utility, use your adapter to join a wireless network, manage your adapter and uninstall your adapter in Mac OS X.This chapter includes the following sections:• Install Driver and Utility• Join a Wireless Network• Management• Uninstall Driver and Utility4. 1. Install Driver and UtilityWe take the steps in Mac OS X 10.10 as an example - the steps may vary slightly for other versions of Mac OS.1. Download the driver and utility at https:///download-center.Note:The CD is included in the package. If your computer has a CD drive, you can also run the included CD to install the driver and utility.2. Double click to unzip the downloaded folder and run the Install.pkg.3. The Install TP-Link Wireless USB Adapter Utility and Driver Wizard window willappear. Click Continue and follow the instructions to complete the installation.4. When the following screen appears, the driver and utility have been installedsuccessfully. Click Restart to finish the installation.5. After restarting the computer, the TP-Link Utility icon will appear on the menubar in the upper-right corner of the screen. To use the utility to join a Wi-Fi network with your adapter, refer to Join a Wireless Network.Note:If the TP-Link Utility icon does not appear on the menu bar, make sure the USB wireless network adapter is connected properly and its LED is on.4. 2. Join a Wireless NetworkThere are two options of using the adapter to join a Wi-Fi network.Option 1: TP-Link UtilityTP-Link Utility lets you easily connect the adapter to a Wi-Fi network and manage the adapter.Option 2: WPS (Wi-Fi Protected Setup)WPS (Wi-Fi Protected Setup) is a network security standard for easily adding computers and other devices to a home network. Use this method if your wireless router or access point supports WPS.4. 2. 1. TP-Link UtilityOption 1Click the TP-Link Utility icon on the menu bar, and choose a Wi-Fi network from the list. Enter the password when prompted.When you are connected to the internet, the network icon will change to .Option 21. Click the TP-Link Utility icon on the menu bar, and then click Open WirelessUtility at the bottom of the network list.2. Select the network you want to join from the list and enter the password whenprompted. Click Join.Note:If your Wi-Fi network is not displayed in the list, you can try to join it by WPS or by clicking Join Other on the above screen, and then follow the on-screen instructions to join the network.4. 2. 2. WPS (Wi-Fi Protected Setup)WPS can be activated via PBC (Push Button Configuration) and PIN code on the TP-Link Utility. Please refer to PBC or PIN below.• PBC1. Press the WPS/QSS button on your router or AP.2. Within 2 minutes, click the TP-Link Utility icon on the menu bar, and then click WPS at the bottom of the network list.3. Click PBC.4. The following screen indicates a successful connection by WPS. Click OK.• PIN1. Click the TP-Link Utility icon on the menu bar, and then click WPS at the bottom of the network list.2. Click PIN.3. Within 2 minutes, log in to the web management page of your router or AP. Go to its WPS page, enter the PIN of the adapter in the corresponding field and click Connect.4. The following screen indicates a successful connection by WPS. Click OK.4. 3. ManagementTP-Link Utility provides you with an easy way to manage various connection settings of your Wi-Fi network.1. Click the TP-Link Utility icon on the menu bar, and then click Open WirelessUtility at the bottom of the network list.2. TP-Link Utility will pop up. Click the Profiles button to open the Profiles screen.3. The Profiles screen lets you manage different Wi-Fi connection settings as profilesso that you can connect to your network easily.Preferred Networks displays the networks that you once connected to. The networks’ status and information are displayed in the table.• To join a Wi-Fi networkIf you want to join a Wi-Fi network that is listed on the profile screen, select the profile and click Apply in the bottom right corner.• To manage an existing profileIf you want to change the wireless settings of an existing profile, select it and then you can edit its Security and Password. If you want to delete a profile, select it and click Remove.4. 4. Uninstall Driver and Utility1. Double click mand in the downloaded folder.2. Enter the password of you computer and when the “Uninstall Complete” messageappears, the uninstallation is complete.Appendix: TroubleshootingT1. W hat should I do if the adapter is not detected?• Make sure the adapter is securely connected to the computer.• Make sure you meet the minimum system requirements for the adapter and that the latest Windows and system updates are installed on your computer.• Make sure you use the latest driver for your specific adapter. The latest drivers can be found at the product’s Support page at https:///download-center.• Try a different USB port on the computer.• Try restarting the computer or try using the adapter on a different computer.T2. H ow to check if I have installed the driver for my adapter successfully or not?1. On your computer, please right click Computer icon and go to Manage;2. Open the Device Manager and go to Network adapters, and then find thecorresponding TP-Link adapter, right click it and then go to Properties;3. If you can see “This device is working properly.” in the red box, you have alreadyinstalled the driver successfully.T3. W hat should I do if can’t connect to the Wi-Fi after installing the driver?• Refer to T2to check if you have installed the driver for your adapter successfully .• Make sure the adapter is securely connected to the computer.• Disable the antivirus software and firewall, then try again.• Try a different USB port on the computer.• Restart your computer and try again.• Re-install the driver and try again.T4. H ow to find the hardware version of the adapter?• The hardware version is printed on the product label on the package or the adapter.There is a character string “Ver:X.Y” (for example, Ver:2.0) in the Serial Number field, and the number X is the hardware version of the adapter.• Visit /faq-46.html and follow the second method to find the hardware version of the adapter.For more detailed instructions:• Can’t find the hardware version of the adapter: https:///faq-46.html • Can’t find or join the wireless networks: https:///faq-2253.html• Can’t install the driver: https:///faq-2252.htmlFCC compliance information statementProduct Name: AC600 Mini Wireless USB AdapterModel Number: Archer T2UResponsible party:TP-Link USA Corporation, d/b/a TP-Link North America, Inc.Address: 145 South State College Blvd. Suite 400, Brea, CA 92821Website: https:///us/Tel: +1 626 333 0234Fax: +1 909 527 6803E-mail:*********************This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/ TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1 ) This device may not cause harmful interference.2 ) This device must accept any interference received, including interference that maycause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been SAR-evaluated for use in hand. SAR measurements are based on a 5mm spacing from the body and that compliance is achieved at that distance.We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.Issue Date: 2019.02.18CE Mark WarningThis is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.OPERATING FREQUENCY (the maximum transmitted power)2400MHz-2483.5MHz (20dBm)5150MHz-5250MHz (23dBm)5250 MHz -5350 MHz (20dBm)5470 MHz -5725 MHz (20dBm)EU declaration of conformityTP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU and 2011/65/EU.The original EU declaration of conformity may be found at https:///en/ ce.RF Exposure InformationThis device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device has been tested and meets the ICNIRP exposure guidelines and the European Standard EN 62209-2. SAR is measured with this device at a separation of 0.5 cm to the body, while transmitting at the highest certified output power level in all frequency bands of this device. Carry this device at least 0.5 cm away from your body to ensure exposure levels remain at or below the as-tested levels.National restrictionsAttention: This device may only be used indoors in all EU member states and EFTA countries.Canadian Compliance StatementThis device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:1 ) This device may not cause interference.2 ) This device must accept any interference, including interference that may causeundesired operation of the device.L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:1 ) l’appareil ne doit pas produire de brouillage;2 ) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, memesi le brouillage est susceptible d’en compromettre le fonctionnement. Caution:1 ) The device for operation in the band 5150–5250 MHz is only for indoor use to reducethe potential for harmful interference to co-channel mobile satellite systems;2 ) For devices with detachable antenna(s), the maximum antenna gain permitted fordevices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;3 ) For devices with detachable antenna(s), the maximum antenna gain permitted fordevices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; andThe high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.DFS (Dy namic Frequency Selection) products that operate in the bands 5250- 5350 MHz, 5470-5600MHz, and 5650-5725MHz.Avertissement:1 ) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquementpour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;2 ) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s)utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limitation P.I.R.E.;3 ) Le gain maximal d’antenne permis pour les dispositifs avec antenne(s) amovible(s)utilisant la bande 5725-5850 MHz doit se conformer à la limitation P.I.R.E spécifiée pour l’exploitation point à point et non point à point, selon le cas.En outre, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pourles bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.Les produits utilisant la technique d’atténuation DFS (sélection dy namique des fréquences) sur les bandes 5250- 5350 MHz, 5470-5600MHz et 5650-5725MHz. Radiation Exposure Statement:This EUT is compliance with SAR for general population/uncontrolled exposure limits in RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 1.0 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.Industry Canada StatementCAN ICES-3 (B)/NMB-3(B)Korea Warning Statements당해 무선설비는 운용중 전파혼신 가능성이 있음.NCC Notice注意!依據 低功率電波輻射性電機管理辦法第十二條 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。

LM540v2长距离蓝牙USB适配器说明书

LM540v2长距离蓝牙USB适配器说明书

LM540-0542LM540v2Page 1 of 3+44(0)|*************************2 Overview1 FeaturesLM540v2 Long Range Bluetooth USB Adapter750m Distance with 2Dbi RP Omni Antenna• World’s Smallest Bluetooth USB SMA Antenna Fit Adapter • Powered From USB only• 787m Connection & Pass Data tested between 2 x LM540 each with 2Dbi AntennaTested at Eaton Dorney Olympic Rowing Park Surrey England. • CSR ROM Bluecore 4 • Compatible with 14 profiles.• Plug & Play with most oporating systems including. OSX, Linux, Windows XP-W7.• Windows 8 Compatible with a free downloaded driver.• IVT Pre-loaded License Avalible. LM tested a range ofBluetooth stacks and found IVT and LM540v2 recorded the lowest latency of any Bluetooth stack in the retail market. • 17.9Dbm Output + 2Dbi Gain Antenna 19.9 DbmOutput allows the LM540v2 to be within the 20Dbm legal broadcasting output.• Bluetooth 2.1 + EDR firmware based design. Bluetooth 2.0 +EDR CompatibleOptional Bluetooth 2.0 fimrware available • EOL (End of Life ) will be 10 Years +. • FCC, RoHS, BQB and RTTE certifiedwith SIG and other certificaitons ongoing.The LM540v2 has a wide range of uses due to the huge range of profiles the adapter can work with, its exceptional distance willallow users to conenct at distances not avalible before now. Other simialr products user external power sources or are twice the size. LM’540v2 s small overall footprint allows users to plug the adapter into a labtop without it being too bulky. users will be able toconnect Bluetooth headsets at distances that were unobtainable before. Making internet telephone calls up to 100m away from your notebook or PC.The LM540v2 has also been fully tested with all of LM Technologies Bluetooth range and allows users to connect LM048 and LM058 series products directly to the LM540 at far greater distances than ever possible before.Product Series: LM540v2+44(0)|*************************3 Packaging Options1x 540-05421x 251-10221x User Guide 1x Retail Box4 General SpecificationSpecificationDescriptionChipset Bluecore 4 CSR ROM ClassClass 1Speed / BandwidthUp to 3MbpsRange0 -787m with 2Dbi AntennaInterface2.0 USB OnlyFrequency 2.400 to 2.4835 GHzHopping1,600/sec, 1MHz channel spaceProfiles Supported AVRCP, GAP, PAN, LAN, DUN, HID, FAX, SYNC FTP, HCRP, BIP, GEOP, SDAP, OPP, SPP, HSP/HFP, A2DPFirmwareCSR HCI Mode Rx Sensitivity -86 dBm typical RF Output17.6Dbm Antenna Gain Max 2.3 dBi Power Supply 5v DC Weight9g approxOperation Temparature -20 °C to +75 °C (-40 to +85c Storage Temprature) Dimensions50.00mm (L) x 27.00 mm (W) x 18.5 mm (H)Standard Bluetooth Specification 2.1 + EDR Product Series: LM540v2Mft Prt No. 540-0546 540-0545 540-0544 540-0543540-0542 Details Pacaking ContentsSingle Adapter Bulk Packed 1x 540-.0542Adapter + 2Dbi Antena Bulk packed1x 540-05421x 251-1022Retail Packed Adapter + Antenna RP Single Adapter Bulk Packed Custom Made 1x 540-.05421x 540-05421x 251-10221x User Guide 1x Retail Box1x IVT License KeyRetail Packed Adapter + Antenna + IVT+44(0)|*************************Hardware StructureProduct Series: LM540v268.0mm Antenna Joint to Top of USB57.0mm Antenna Joint to start of USBWidth of housing 13.8mmLM540 LED Colour Sequence is as follows: -LED Red: Power On LED is on LED Red:Power OFFLED is off LED Amber: Transmitting Data LED is flashing LED Amber: No data is transmitted LED is offLED Blue: Bluetooth is Searching LED is flashing slow LED Blue:Bluetooth is ConnectedLED is on permanatlyLM540-0542。

L52159 AirLancer USB-300agn 300Mbps高速无线网络适配器说明书

L52159 AirLancer USB-300agn 300Mbps高速无线网络适配器说明书

...c o n n e c t i n g y o u r b u s i n e s sAirLancer USB-300agn300 Mbps high-speed wireless network adapter࡯Wireless network adapter for IEEE 802.11a/g/n (draft 2.0)࡯MIMO performance with up to 300 Mbps gross data rate࡯Cable for better positioning࡯One of LANCOM's line of optimized high-speed wireless LAN products including wirelessnetwork cards, access points and antennas࡯Hardware AES for IEEE 802.11i / WPA2 with maximum performanceHigh-speed wireless LAN.The AirLancer USB-300agn is a USB adapter designed to upgrade laptops and desktop PCs to IEEE 802.11n (draft 2.0). By connecting this device to a standard USB 2.0 interface, clients benefit from higher throughput and better coverage. Because of its backward compatibility to the former IEEE 802.11abg standards, the AirLancer USB-300agn assures highest levels of flexibility. Depending on the configuration, switching between the standards can be automated to provide immediate access to every user, whatever the situation requires. Rapid logins to wireless hotspots don't get any quicker and easier than this.Enterprise WLAN.Business environments are increasingly becoming mixed environments. Because companies rarely migrate entire infrastructures to a different WLAN standard in one go, it is common for different standards to be working in parallel. The USB-300agn is able to switch between both frequency ranges (2.4 and 5 GHz) and can upgrade non-11n clients. Data transfer speeds can be more than doubled, the range of wireless cells is optimized, and existing WLAN standards can be operated in parallel.Professional security.The AirLancer USB-300agn supports all of the security technologies in wireless LANs hosted by LANCOM Wireless access points, including IEEE 802.11i, 802.1x, WPA2, WPA and WEP64/128/152.Supported IEEE standards࡯IEEE 802.11n draft 2.0࡯IEEE 802.11a࡯IEEE 802.11b࡯IEEE 802.11gFrequency range2400 - 2483.5 MHz (ISM) , 5150 - 5350 MHz or 5470 - 5725 MHzData rates IEEE 802.11n (draft 2.0)300 Mbps according to IEEE 802.11n draft 2.0 with MSC15 (Fallback to 6,5 Mbps with MSC0)Data rates IEEE 802.11 b/g54 Mbps to IEEE 802.11g (fallback to 48, 36 , 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection) compatible to IEEE 802.11b (11, 5.5, 2, 1 Mbps, Automatic Rate Selection), 802.11 b/g compatibility mode or pure g or pure bData rates IEEE 802.11 a54 Mbps (fallback to 48, 36, 24, 18, 12, 9, 6 Mbps, Automatic Rate Selection)Output Power࡯802.11a: 15 ~ 17 dBm࡯802.11b: 18 dBm࡯802.11g: 16 ~ 18 dBm࡯802.11n, 5 GHz / 20 MHz channel: 12 ~ 17 dBm࡯802.11n, 5 GHz / 40 MHz channel: 9 ~ 17 dBm࡯802.11n, 2.4 GHz / 20 MHz channel: 13 ~ 18 dBm࡯802.11n, 2.4 GHz / 40 MHz channel: 11 ~ 18 dBmValues depend on the speed grade and channel.Range(the effective range and data transferrates depend upon local conditionsand potential sources of interference)Outdoor Indoor802.11a50 m @ 54 Mbps300 m @ 6 Mbps 30 m @ 54 Mbps 100 m @ 6 Mbps802.11b150 m @ 11 Mbps300 m @ 1 Mbps 30 m @ 11 Mbps 100 m @ 1 Mbps802.11g50 m @ 54 Mbps300 m @ 6 Mbps 30 m @ 54 Mbps 100 m @ 6 Mbps802.11n30 m @ 300 Mbps30 m @ 130 Mbps************20 m @ 300 Mbps 20 m @ 130 Mbps ***********Receiver sensitivity࡯IEEE 802.11a: -91 dBm @ 6 Mbps / -75 dBm @ 54 Mbps࡯IEEE 802.11b: -96 dBm @ 1 Mbps / -86 dBm @ 11 Mbps࡯IEEE 802.11g: -91 dBm @ 6 Mbps / -75 dBm @ 54 Mbps࡯IEEE 802.11n (5 GHz): -90 dBm @ 15 Mbps / -67 dBm @ 300 Mbps࡯IEEE 802.11n (2.4 GHz): -91 dBm @ 15 Mbps / -68 dBm @ 300 Mbps Transmission channels࡯802.11a: Up to 19 non-overlapping channels (5 GHz band)࡯802.11b/g: Up to 14 channels, max. 3 non-overlapping (2.4 GHz band)Depending on local regulations in your country.Encryption WPA2 / 802.11i, WPA1 with AES / TKIP, WEP64 / WEP128 / WEP152 Authentication802.1x, PSKInterface USB 2.0Antenna Dual-band antennas (2.4 / 5 GHz) on boardOperation temperature range0 °C ~ +55 °CStorage temperature range-20 °C ~ +80 °COperation humidity15 % - 95 %, non-condensingStorage humidity max. 95 %, non-condensingSpecial features 1 LEDs on board, active: green color, transmission: blinkingContinuous TX in (avg./ max.)࡯802.11a: 399 / 460 mA ࡯802.11b: 304 / 380 mA ࡯802.11g: 287 /380 mA࡯802.11n (2.4 GHz): 254 / 350 mA ࡯802.11n (5 GHz): 334 / 410 mA FTP Tx (avg./ max.)࡯802.11a: 256 / 370 mA ࡯802.11b: 260 / 390 mA ࡯802.11g: 217 / 380 mA࡯802.11n (2.4 GHz): 227 / 390 mA ࡯802.11n (5 GHz): 240 / 420 mA FTP Rx (avg./ max.)࡯802.11a: 201 / 320 mA ࡯802.11b: 200 / 360 mA ࡯802.11g: 178 / 320 mA࡯802.11n (2.4 GHz): 195 / 330 mA ࡯802.11n (5 GHz): 332 / 390 mA Standby mode (avg./ max.)࡯802.11a: 186 / 310 mA ࡯802.11b: 168 / 330 mA ࡯802.11g: 164 / 300 mA࡯802.11n (2.4 GHz): 182 / 300 mA ࡯802.11n (5 GHz): 200 / 320 mAManagement Microsoft® Windows® 2000, XP, and Vista DriverWindows 2000 / XP / XP-64 / Vista driverCD CD with comprehensive documentation in English and German, PC drivers, management and diagnosis software; printed Quick Install Guide in English and German Cable1.5 m USB cable for better positioning CEEN 301 489-1, EN 301 489-17, EN 609502.4 GHz WLAN EN 300 3285 GHz WLAN EN 301 893CertificationsCertification notified for Germany, Belgium, Netherlands, Luxembourg, Austria, Switzerland, UK, Italy, Spain, France, Portugal, Czech Republic, Denmark, Malta, Estonia, Finland, Greece, Ireland, Iceland, Lithuania, Poland, Slovakia, Sweden, Cyprus, Hungary, Latvia, Slovenia, Rumania, Bulgaria, NorwayAirLancer USB-300agn 61318Warranty 2 yearsSupportVia hotline and Internet, free software updates LANCOMSystemsGmbHIAdenauerstr.20/**************************************************************.lancom.euncom.euL A N C O M , L A N C O M S y s t e m s a n d L C O S a r e r e g i s t e r e d t r a d e m a r k s . A l l o t h e r n a m e s o r d e s c r i p t i o n s u s e d m a y b e t r a d e m a r k s o r r e g i s t e r e d t r a d e m a r k s o f t h e i r o w n e r s . S u b j e c t t o c h a n g e w i t h o u t n o t i c e .N o l i a b i l i t y f o r t e c h n i c a l e r r o r s a n d /o r o m i s s i o n s . 01/09。

蓝牙USB同步通讯方式选择与设置

蓝牙USB同步通讯方式选择与设置
蓝牙通讯方式选择与设置
第一 步:将通讯适配器的数据线插入蓝牙接口:Bluetooth,在点检仪中将通讯方式选 择蓝牙; 第二步: 根据每台需要使用点检仪上传下载点检任务的电脑操作系统版本选择合适的蓝 牙驱动程序; (注:一般 Win XP 等系统自带蓝牙驱动,只要数据线插入蓝牙接口并 连上电脑,电脑就会提示找到新设备,自动搜索并安装驱动。安装完成后会弹出下 图,勾选“启用发现”即可) ,如果系统提示无合适的驱动,可以再打开据线插入通讯适配器的 USB 插口并确定数据线另一头与电脑正常连接; 第二步:将点检仪通信方式设置成 USB 同步方式点确定; 第三步:连接成功后可以听到点检仪器发出同步声音,电脑任务栏时间旁边的 为
点亮的绿色,如果没有连接时该图标是灰色的,也听不到同步连接成功的提示音。 请检查数据线是否插好,通讯方式是否为 USB 方式,点检仪有没有开机(非开机 状态是检测不到设备连接成功的) ; 第四步:连接成功后,打开通信程序,开启服务如下图所示,初始化 WebService 信息 完成:
置,查看并将有关选项打勾,再开启通讯程序初始化 WebService,进行连接,这时 应该能正常进行通信,上传下载计划或数据。
第五步:进入点检排程,查询并选中当前任务操作人员打勾,再点标准化等待任务的标 准化完成
第六步:进入点检仪通讯界面,选择连接,连接成功后,通信程序有一条连接提示如下 图: (序号 1,点检仪 0,连接类型 TCPIP SOCKET 连接,表示你此前的操作都是正 确的,设备也连接正常。 )
如果出现红色提示请按提示内容操作,上图提示未标准化线路,可以按第五步操作, 完 成后可以通过点检仪进行计划下载。 第七步:如果点检仪在点击连接时出现 IP 错误,请确认数据线插入正常,同步通信工 具连接点亮,开启通讯程序初始化 WebService,如果还是提示 IP 错误,可以关闭 开启几次通信服务。依旧提示 IP 错误时,请双击打开 ,在文件下选择连接设

Jaybird RUN True Wireless Sport Headphones用户手册说明书

Jaybird RUN True Wireless Sport Headphones用户手册说明书

ENGLISHWelcome (3)Bluetooth Connection (4)Product Overview (5)What’s in the Box (6)Fit (7)Charging (8)Controls (10)On/Off (10)Music & Calls (11)Pairing (12)Jaybird App (13)How to Reset (16)WELCOMEJAYBIRD RUNTRUE WIRELESS SPORT HEADPHONESSECURE + COMFORT-FIT INTERCHANGEABLE TIPS & FINS FOR ALL EAR SIZESSWEAT-PROOF + WATER RESISTANT4 HOUR PLAYTIME WITH ONE CHARGE + 8H WITH INCLUDED CHARGE CASECUSTOM SOUND PUMP UP THE BASS, OR CRANK THE TREBLE, & NEVER MISS A CALLYour right Jaybird RUN earbud is the master (main) earbud. The right earbud pairs and connects to your audio device and to the left earbud.For best Bluetooth performance, try to reduce the distance between your right earbud and your audio device. For example, try to have your audio devicein your right pocket or on your right arm if runningwith an arm band.PRODUCT OVERVIEWCHARGE STATUS LEDLEFT BUD CHARGE STATUS LED RIGHT BUDWHAT’S IN THE BOXCARRY /ACCESSORY POUCH4 PAIRS EAR FINS2 PAIRS OVAL SILICONE EAR TIPS USB CHARGING CABLEAccessories can also be purchased online at 2 PAIRS ROUND SILICONE EAR TIPSFITTry different combinations of ear tips and fins. The right selection will deliver a great sound and give you a secure comfort-fit that allows you to forget you’re wearing them.Jaybird Run offers you 4 hours of playtime when fully charged.The Charge Case gives you two additional recharge cycles or 8 hours additional playtime.CHARGING YOUR BUDSYour buds will start charging as soon as you place them into the Charge Case and close the lid. The left and right LED’s will indicate the charging status for about 10 seconds when not plugged into power. Green LED pulses = charging Green LED solid = fully chargedA 5 minute charge gives you up to 1 hour of playtime .A full charge can take up to 2 hours if charging from low batteryCHARGING– BUDSGreen LED pulses = chargingGreen LED solid = fully chargedWhen the charge case runs low on battery the LEDwill turn red for about 10 seconds on opening or closing the lid.A full charge can take up to 3 hours.CHARGE CASESTATUS LEDCONTROLS– ON/OFFRemoving your earbuds from the charge case will automatically turn them on while placing them into the charge case will turn them off.When not in the case, your buds automatically power down after about 30 minutes of non use.You can also manually turn your earbuds on or off.OFF – P ressing on either the left or right button for 3 seconds will turn off both buds.ON – A single press on each bud for 3 seconds will turn them on.POWER ON – LED turns solid green for about 2.5 secondsPOWER OFF – LED glows solid red for 1.5 secondsPAIRING – L ED blinks green continuously in pairing modeand turns off once connected to a music deviceor upon reaching timeout (5 min)CONTROLS – PAIRING12Turn off the right bud by pressing the multi-function button for 3 seconds .Enter pairing mode by pressing themulti-function button for 6 seconds .To pair to another device follow the steps below.JAYBIRD APPThe Jaybird App lets you customize the sound profile on your buds.can play your custom sound on any device – no matter whereyou go with any device you use.JAYBIRD APPNOTE: The Jaybird app works with Jaybird Run , X3 and Freedom . Other manufacturers and older Jaybird buds are not supported.Adding additional bass to your sound profile through the Jaybird app will reduce play time.EQUALIZERSAVESave your new preset to your dashboard for easy access to all your favorite sound settings.HISTORYTrack through a history of your changes.DEVICESee your connected device and battery status.JAYBIRD APP SETTINGSBUTTON CONTROLS Change the way youcontrol your buds.NAME Rename your buds so you can easily find them on your devices.FIND MY BUDS Lost one of your buds? Find out where you left it in real time. TUTORIALSFind tips on how to maximize the use of your budsHOW TO RESET1234To reset your buds to their original factory settings, put your buds in pairing mode by turning the buds off.Push and hold the multi-function button on theright bud for about 6seconds, until you seethe LED flash green.Now press the buttontwice. Upon successfulfactory reset, the LEDwill turn orange and yourbuds will turn off.Once your buds havebeen reset they willautomatically go intopairing mode oncepowered on. Select“Forget” or “Remove”Jaybird Run from yourdevice’s Bluetoothmenu and pair again.LISTEN RESPONSIBLYAvoid excessive volume levels and prolonged periods of listening. Prolonged listening at excessive volume levels may cause permanent hearing disability.Do not use around road traffic.CARE AND MAINTENANCEClean eartips regularly of dirt and wax buildup. To clean, remove eartips from earbuds, then gently wipe away dust and oil with a dry cloth, and/or use warm water and mild soap to remove buildup. Rinse and completely dry before reattaching.Before charging, ensure earbuds are completely dry of sweat and water.Video instructions at /support/run。

RS232到USB无线转接器说明书

RS232到USB无线转接器说明书

Transceptor universal inalámbrico de RS232 a USBU D ispositivo paracomunicación inalámbrica 232, convierte cualquier RSU I nterfaz inalámbrica USB directamente a PC U U n módulo receptor inalámbrico opera múltiples módulos transmisores inalámbricos U (GHz 2,4ISM) Soporte para transceptor de RF U R ango de RF: Hasta 40 m (130') en interiores/urbano [hasta 120 m (400') en exteriores/línea de visión]Los transmisores inalámbricos de la Serie WRS232 le permiten convertir una conexión RS232 estándar para que funcione inalámbricamente. Es un sistema de dos partes, el WRS232 convierte la señal RS232 estándar en una inalámbrica, mientras el receptor WUSB convierte la señal inalámbrica en una conexión USB estándar.Especificaciones Transmisor inalámbrico I nterfaz del dispositivo : Conector RS232 de RJ12 a DB9 incluido Comunicación RS232: Soporte para transmisor 9600 BPSRF:ISM 2,4 GHz, espectroensanchado por secuencia directa Paquete de datos RF estándar: Arquitectura de comunicación abierta IEEE 802.15.4Salida de alimentación RF:10 dBm (10 mW)Transmisor inalámbrico WRS232. Adaptador CA UNIV-AC-100/240opcional, se vende por separado.Receptor inalámbrico WUSB.Ambos modelos se muestran en su tamaño realC o nv i e r t ed e m a n er ai n al ám b r i c ad e R S 232 a U S B W WRS232-USBUsando el transceptor inalámbrico RS232 a USBNota: Debido a las normas de frecuencia de transmisión, este producto únicamente puede ser utilizado en Estados Unidos, Canadá y Europa Completo de serie con software y manual del operador.Ejemplo de pedido: Módulos transmisores y receptores inalámbricos WRS232-USB , cable RS232 con conector RJ12 a DB9,conector macho/macho DB9 y cable USB.Opción de comunicación inalámbrica RS232 para regulador de temperatura iSeries.Voltaje de suministro: Directamente del instrumento central, mediante conexión RJ12 o adaptador CA opcionalCorriente de suministro: 60 mAAdaptador CA: 100 a 240 Vca, 50 a 60 HzTensión de salida: 9 Vcc @ 1,7 AClavija de salida (hembra): Centro positivo, coax. 2,0/5,5/10 mmReceptor inalámbricoInterfaz de PC: Compatible con USB 1.1 y USB 2.0Tipo de cable: USB 4P(A) macho a mini 5P(B) macho 1,8 m (6') de largo incluidoRango de RF: Hasta 40 m (130'): E n interiores/urbano H asta 120 m (400'): E n exteriores/línea de visión Condiciones de entorno operativo: 0 a 50 °C, 0 a 90% de HR (sin condensado)Dimensiones: 70 de largo x 51 de ancho x 20 mm de altura (2,75 x 2 x 0,80")Termómetro infrarrojo manual Serie OS533 con opción inalámbrica RS232.Transmisor inalámbrico PATENTEPATENTADORegistrador de gráfico circular Serie CTXLReceptor Transmisor inalámbricoTM。

A6100 WiFi USB 适配器 802.11ac 双频包装说明书

A6100 WiFi USB 适配器 802.11ac 双频包装说明书

Installation GuideA6100 WiFi USB Adapter802.11ac Dual BandPackage ContentsInstallationFollow these instructions to begin using your A6100 WiFi USB Adapter. To set up your adapter:1. Insert the resource CD in your computer CD drive.Note: If your computer does not have a CD drive, download the A6100 resource CD driver by visiting . Click the Support for Home Products button and enter A6100 in the search field.If the Resource CD screen does not display, browse the files on the CD and double-click Autorun.exe .A6100 WiFi Resource CDUSB AdapterThe NETGEAR Resource CD screen displays.2. Click the Setup link.The Software Update Check screen displays.3. Install the setup software.You have two options:•Connected to the Internet . If you are connected to the Internet, click the Check for Updates button. After the software checks for updates, the Update Check Complete screen displays. Click the Continue button. The Welcome screen displays.•Not connected to the Internet . If you are not connected to the Internet, click the Install from CDbutton. The Welcome screen displays.4. Click the I agree radio button to accept the license agreement and then clickthe Next button.A message displays asking you to wait while software is installed. After a few minutes, NETGEAR genie prompts you to insert your adapter.5. Insert the adapter into a USB port on your computer, as shown:6. Click the Next button.The NETGEAR genie screen displays.August 2013NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.NETGEAR, Inc.350 East Plumeria Drive San Jose, CA 95134 USANETGEAR genie displays a list of wireless networks in your area.Standalone Driver InstallationTo install a standalone driver:1.Insert the resource CD in your computer CD drive.Note: If your computer does not have a CD drive, download the A6100 resource CD driver by visiting . Click the Support for Home Products button and enter A6100 in the search field.If the Resource CD screen does not display, browse the files on the CD and double-click Autorun.exe .2.Click the Install Windows Standalone Driver link.The driver installs on your computer.3.When prompted, insert the adapter into a USB port on your computer.Join a Wireless NetworkYou can join a wireless network from the NETGEAR genie, or you can use Wi-Fi Protected Setup (WPS) if your wireless router supports it.•NETGEAR genie . From the NETGEAR genie screen, click the Join a Network button. Select your wireless network and click the Connect button. If the network is secure, enter its password or network key. •WPS . Press and hold the WPS button on the adapter for two seconds.Within two minutes, press the WPS button on your wireless router or gateway.The adapter joins the network, which can take a few minutes. Your settings are saved in a profile.WPS buttonCheck Your Connection StatusWhen you install your adapter, the NETGEAR genie icon displays in the Windows system tray and on the desktop. You can double-click this icon to open NETGEAR genie to make changes or connect to a different wireless network. The color of the icon indicates the strength of your wireless connection:White. 3–5 bars (strong connection)Yellow . 1–2 bars (weak connection) Red . 0 (zero) bars (no connection)If you remove your adapter, NETGEAR genie is not available, so the icon does not display. When you insert the adapter again, the icon returns.SupportThank you for selecting NETGEAR products.After installing your device, locate the serial number on the label of your product and use it to register your product at https:// .You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. For product updates and web support, visit .NETGEAR recommends that you use only the official NETGEAR support resources.You can get the user manual online at or through a link in the product’s user interface.For the current EU Declaration of Conformity, visit/app/answers/detail/a_id/11621/.。

RTL8821CU双频wifi蓝牙4.2二合一USB接口模块

RTL8821CU双频wifi蓝牙4.2二合一USB接口模块

Product SpecificationRevision V1.0Date2017-4-15Model Name BL-M8821CU1ProductName IEEE802.11b/g/n/ac(1T1R)USB WLANAnd BT ModuleBilian Approve FieldEngineer QC SalesCustomer Approve FieldEngineer QC Manufactory PurchasingShenzhen Bilian Electronic Co.,LtdAddress:No268,Fuqian Rd.,JuTang Community,Guanlan Town,Baoan District,Shenzhen,518110,PRCHomepage:Table of ContentsRevision History (1)1.Introduction (1)1.1General Description (1)1.2Features (1)1.3Applications (2)2.Functional Block Diagram (2)3.Product Technical Specifications (2)3.1General Specifications (2)3.2DC Power Consumption (3)3.3RF Specifications (4)4.Pin Assignments (7)5.Application Information (8)5.1Supported Platform (8)5.2Typical Application Circuit (8)6.Mechanical Specifications (10)7.Others (11)7.1Package Information (11)7.2Storage Temperature and Humidity (11)7.3Recommended Reflow Profile (11)Revision HistoryDate DocumentRevisionProductRevisionDescription2017/4/60.1V1.0Preliminary release2017/4/15V1.0V1.0Ver1.0release1.Introduction1.1General DescriptionBL-M8821CU1product is a highly integrated single-chip802.11a/b/g/n/ac1T1R USB2.0WLAN controller It combines a WLAN MAC,a1T1R capable WLAN baseband,BT Protocol(LM,LL and LE),BT Baseband,modem, and WLAN/BT RF in a single chip.The module provides a complete solution for ahigh-performance wireless LAN and Bluetooth device.The BT controller supports BT4.2system and compatibles Bluetooth2.1+EDR.Figure1Top View Figure2Bottom ViewNote:The above picturesare for reference only1.2Features●Operating Frequencies:2.4~2.4835GHz and5.15~5.85GHz●Host Interface is USB2.0for WLAN and BT controller●IEEE Standards:IEEE802.11a/b/g/n/ac●Wireless data rate can reach up to433.3Mbps●Bluetooth Low Energy Support●Connect to external antenna through the half hole●Power Supply:3.3V±0.2V1.3Applications●MID●IP Camera●STB●Smart TV●E-book●Other devices which need to be supported by wireless network2.Functional Block DiagramFigure3BL-M8821CU1block diagram 3.Product Technical Specifications3.1General SpecificationsItem DescriptionProduct Name BL-M8821CU1Main Chip RTL8821CU-CGHost Interface USB2.0IEEE Standards IEEE802.11a/b/g/n/acOperating Frequencies 2.4GHz~2.4835GHz/5.15GHz~5.85GHz Modulation WiFi:802.11b:CCK,DQPSK,DBPSK802.11a/g:64-QAM,16-QAM,QPSK,BPSK802.11n:64-QAM,16-QAM,QPSK,BPSK802.11ac:256-QAM,64-QAM,16-QAM,QPSK,BPSKBT:8DPSK,π/4DQPSK,GFSKWorking Mode Infrastructure,Ad-HocWireless Data Rate WiFi:802.11b:1,2,5.5,11Mbps802.11a/g:6,9,12,18,24,36,48,54Mbps802.11n:HT20reach up to144.4Mbps,HT40reach up to300Mbps802.11ac:VHT20reach up to173.3Mbps,VHT40reach up to239Mbps,VHT80 reach up to433.3MbpsBT:1Mbps for Basic Rate2,3Mbps for Enhanced Date RateRx Sensitivity-96dBm(Min)TX Power18.5dBm(Max)Antenna Type Connect to external antenna through the IPEX connectorDimension(L*W*H)13.0*12.2*1.5mm(L*W*H),Tolerance:±0.15mmPower Supply 3.3V±0.2VPower Consumption Standby192mA@3.3V(Max)TX mode908mA@3.3V(Max)Clock Source40MHzWorking Temperature-10°C to+50°CStorage Temperature-40°C to+70°CESD CAUTION:Although this module is designed to be as robust as possible,Electrostatic Discharge(ESD) can damage this module.It must be protected from ESD at all times and handled under the protection of ESD.3.2DC Power ConsumptionVcc=5V,T a=25°C,unit:mASupply current Typ.MaxStandby(RF disabled)82104802.11b1Mbps11MbpsSupply current Typ.Max.Typ.Max.TX mode375404350420Rxmode8010480104 802.11g6Mbps54Mbps Supply current Typ.Max.Typ.Max. TX mode325388240376 Rxmode8511286116 802.11n HT20MCS0MCS7 Supply current Typ.Max.Typ.Max. TX mode320380239372 Rxmode8711288116 802.11n HT40MCS0MCS7 Supply current Typ.Max.Typ.Max. TX mode286352215360 Rxmode8911690120 802.11a6Mbps54Mbps Supply current Typ.Max.Typ.Max. TX mode340420270380 Rxmode9012091124 802.11n HT40(5G)MCS0MCS7 Supply current Typ.Max.Typ.Max. TX mode320392240384 Rxmode9212493128 802.11ac MCS0MCS9 Supply current Typ.Max.Typ.Max. TX mode300380240388 Rxmode1041321061443.3RF SpecificationsTX Power 2.4G:802.11b:17±1.5dBm802.11g/11n-HT20:15±1.5dBm 802.11n-HT40:15±1.5dBm5G:802.11a/11n-HT20:15±1.5dBm 802.11n-HT40:14±1.5dBm 802.11ac:13±1.5dBmTX Constellation Error(EVM)2.4G:802.11b:<-22dB@11Mbps802.11g:<-28dB@54Mbps 802.11n-HT20:<-28dB@72.2Mbps 802.11n-HT40:<-28dB@150Mbps 5G:802.11a:<-28dB@54Mbps 802.11n-HT20:<-28dB@72.2Mbps 802.11n-HT40:<-28dB@150Mbps 802.11ac:<-33dB@433MbpsReceiver Minimum Input Sensitivity@PER 1Mbps:-96dBm@PER<8%; 11Mbps:-90dBm@PER<8%; 54Mbps:-72dBm@PER<10%; 150Mbps:-69dBm@PER<10%; 433Mbps:-59dBm@PER<10%;RFTest Report PathA2.4GMode Rate(Mbps)Power(dBm)EVM(dB)Sensitivity(dBm)CH1CH7CH13CH1CH7CH13CH1CH7CH1311b 118.9318.3719.22-33.81-37.73-37.84-96-96-96 1117.1916.7916.92-26.74-27.27-24.98-90-90-9011g 917.8318.0517.69-26.19-24.04-24.94-91-91-91 5415.7215.4415.48-34.08-32.80-31.81-75-75-75Mode Rate(Mbps)Power(dBm)EVM(dB)Sensitivity(dBm)CH3CH7CH11CH3CH7CH11CH3CH7CH1111n HT40MCS016.7817.2816.87-30.13-27.60-27.78-89-89-89 MCS714.9714.9914.99-34.46-33.68-34.61-70-70-70BT Rate(Mbps)Power(dBm)Sensitivity(dBm)(LE mode) 05075373839DH11 5.94 5.35 5.31-77-77-77 3DH53 5.28 5.08 5.07-73-73-73RFTest ReportPathA5GMod Rate(Power(dBm)EVM(dB)Sensitivity(dBm)e Mbps)CH36CH100CH140CH161CH36CH100CH140CH161CH36CH100CH140CH16111a 915.5616.0216.2216.08-24.32-26.25-24.10-24.93-90-90-90-90 5414.2914.8614.6014.48-29.62-31.00-30.43-30.92-74-74-74-74Mod e Rate(Mbps)Power(dBm)EVM(dB)Sensitivity(dBm)CH38CH102CH142CH159CH38CH102CH142CH159CH38CH102CH142CH15911n 40MCS016.7516.6316.7616.99-25.09-27.21-26.30-25.59-88-87-87-87 MCS714.4414.4814.3314.74-30.65-31.13-30.45-31.74-69-69-69-69Mod e Rate(Mbps)Power(dBm)EVM(dB)Sensitivity(dBm)CH42CH106CH138CH155CH42CH106CH138CH155CH42CH106CH138CH15511ac MCS015.9915.4715.2115.50-27.71-27.64-28.39-28.33-84-84-84-84 MCS913.7313.3413.2913.40-35.50-32.91-36.04-35.52-60-59-59-594.Pin AssignmentsFigure4Pin Assignments(Top view)The following signal type codes are used in the tables: I:Input O:OutputO/D:Open Drain P:Power PinPin No:Pin Name Type Description1GND P Ground2RF_0I/O5G WIFI and BT ANT3RF_1I/O2G WIFI ANT4GND P Ground5、6、7、8NC/Floating(Don’t connected to groundO Bluetooth device to wake up HOST9BT_WAKE_HOSTI HOST to wake up Bluetooth device10HOST_WAKE_BT11VIN P VDD3.3VPower Supply12USB_DM I/O USB Transmitter/Receiver Differential Pair13USB_DP I/O USB Transmitter/Receiver Differential Pair14GND P ground153DD_SYNC I/O PCM_OUT/GPIO116WL_DIS I WIFI DISABLE(Low potential)17BT_DIS I BT DISABLE(Low potential)18CHIP_EN I High asserting for use/Low asserting resetI HOST to wake up WIFI19HST_WAKE_WLO WIFI to wake up HOST20WL_WAKE_HST21WPS/WPS Switch22LED/External LED Control5.Application Information5.1Supported PlatformOperating System CPU Framework Driver LINUX(Kernel2.6.24~3.19.3)ARM,MIPSII,X86Platform Enable5.2Typical Application CircuitLED CircuitWPS CircuitRF reference circuitFigure5Typical application circuit NOTE:1、RF trace need to keep50ohm impedance.2、USB differential pair need to keep90ohm impedance.3、C110uF closed to Module pin114、Reserved0R between Module pin16pin17and Host6.Mechanical SpecificationsModule dimension:Typical(L*W*H):13.0mm*12.2mm*1.5mm Tolerance:+/-0.15mmFigure6Module dimension7.Others7.1Package InformationFigure7Package Information7.2Storage Temperature and Humidity1.Storage Condition:Moisture barrier bag must be stored under30℃,humidity under85%RH.The calculated shelf life for the dry packed product shall be a12months from the bag seal date.Humidity indicator cards must be blue,<30%.2.Products require baking before mounting if humidity indicator cards reads>30%temp<30℃, humidity<70%RH,over96hours.Baking condition:125℃,12hours.Baking times:1time.7.3Recommended Reflow ProfileReflow soldering shall be done according to the solder reflow profile,Typical Solder Reflow Profile is illustrated in Figures8.The peak temperature is245℃.Figure8Typical Solder Reflow Profile。

映美打印机说明书

映美打印机说明书
2.5.1 安装托纸板 ............................................................................................................................................. 5 2.5.2 拆卸托纸板 ............................................................................................................................................. 5 2.6 安装进纸旋钮................................................................................................................................................. 6 2.7 安装色带......................................................................................................................................................... 6 2.8 连接计算机..................................................................................................................................................... 7 2.8.1 USB 电缆的连接 ...................................................................................................................................... 7 2.8.2 并口电缆的连接 ..................................................................................................................................... 8 2.8.3 串口电缆的连接 ..................................................................................................................................... 8 2.8.4 以太网电缆的连接 ................................................................................................................................. 8 2.9 连接电源......................................................................................................................................................... 9 2.10 安装驱动程序............................................................................................................................................... 9 2.11 以太网接口机型的网络设置..................................................................................................................... 10 2.11.1 连接打印机.......................................................................................................................................... 10 2.11.2 对打印机进行 IP 地址设置 ................................................................................................................ 10 2.11.3 打印机网络驱动程序安装.................................................................................................................. 13

MOXA NPort DE-211 DE-311 1-port 串行设备服务器说明书

MOXA NPort DE-211 DE-311 1-port 串行设备服务器说明书

NPort Express Series1-port RS-232/422/485serial device serversFeatures and Benefits•3-in-1serial port:RS-232,RS-422,or RS-485•Variety of operation modes,including TCP Server,TCP Client,UDP,EthernetModem,and Pair Connection•Real COM/TTY drivers for Windows and Linux•2-wire RS-485with patented Automatic Data Direction Control(ADDC®)CertificationsIntroductionThe NPort®DE-211and DE-311are1-port serial device servers that support RS-232,RS-422,4-wire RS-485,and2-wire RS-485.The DE-211 supports10Mbps Ethernet connections and has a DB25female connector for the serial port.The DE-311supports10/100Mbps Ethernet connections and has a DB9female connector for the serial port.Both device servers are ideal for applications that involve information display boards,PLCs,flow meters,gas meters,CNC machines,and biometric identification card readers.SpecificationsEthernet InterfaceNo.of Ports1Magnetic Isolation Protection 1.5kV(built-in)10/100BaseT(X)Ports(RJ45connector)DE-311:Auto MDI/MDI-X connection10BaseT(X)Ports,RJ45Connector DE-211:Auto MDI/MDI-X connectionEthernet Software FeaturesConfiguration Options Windows Utility,Telnet Console,Serial ConsoleManagement ARP,BOOTP,DHCP Client,IPv4,TCP/IP,Telnet,UDP,ICMPWindows Real COM Drivers Windows95/98/ME/NT/2000,Windows XP/2003/Vista/2008/7/8/8.1/10(x86/x64),Windows2008R2/2012/2012R2(x64),Windows Embedded CE5.0/6.0,Windows XPEmbeddedFixed TTY Drivers SCO UNIX,SCO OpenServer,UnixWare7,QNX4.25,QNX6,Solaris10,FreeBSD,AIX5.x,HP-UX11i,Mac OS XLinux Real TTY Drivers'Kernel version:2.4.x,2.6.x,3.x,4.x,Kernel version:2.6.x,Kernel version:3.x,Kernelversion:4.xAndroid API Android3.1.x and laterSerial InterfaceConnector DE-211:DB25femaleDE-311:DB9femaleSerial Standards RS-232,RS-422,RS-485No.of Ports1Baudrate Supports standard baudrates(unit=bps):50,75,110,134,150,300,600,1200,1800,2400,4800,7200,9600,19200,38400,57600,115200,230.4kData Bits5,6,7,8Stop Bits1,1.5,2Parity None,Even,Odd,Space,MarkFlow Control None,RTS/CTS,XON/XOFFRS-485Data Direction Control ADDC®(automatic data direction control)Serial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GNDRS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDPower ParametersInput Current DE-211:180mA@12VDC,100mA@24VDCDE-311:300mA@9VDC,150mA@24VDCInput Voltage DE-211:12to30VDCDE-311:9to30VDCReliabilityAlert Tools Built-in buzzer and RTC(real-time clock)Physical CharacteristicsHousing MetalDimensions(with ears)90.2x100.4x22mm(3.55x3.95x0.87in)Dimensions(without ears)67x100.4x22mm(2.64x3.95x0.87in)Weight480g(1.06lb)Environmental LimitsOperating Temperature0to55°C(32to131°F)Storage Temperature(package included)-40to75°C(-40to167°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN55032/24EMI CISPR32,FCC Part15B Class BEMS IEC61000-4-2ESD:Contact:4kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:3V/mIEC61000-4-4EFT:Power:1kV;Signal:0.5kVIEC61000-4-5Surge:Power:1kVIEC61000-4-5Surge:Power:1kV;Signal:1kVIEC61000-4-6CS:150kHz to80MHz:10V/m;Signal:10V/mIEC61000-4-6CS:150kHz to80MHz:3V/m;Signal:3V/mIEC61000-4-11DIPsMedical DE-311:EN60601-1-2Class B,EN55011Safety UL60950-1DeclarationGreen Product RoHS,CRoHS,WEEEMTBFTime DE-211:347,822hrsDE-311:225,529hrsStandards MIL-HDBK-217FWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x NPort Express Series device serverPower Supply1x power adapter,universalDocumentation1x document and software CD1x quick installation guide1x warranty cardDimensionsNPort DE-311NPort DE-211Ordering InformationModel Name Ethernet Port Speed Serial Connector Power Input Medical Certifications DE-21110Mbps DB25female12to30VDC–DE-31110/100Mbps DB9female9to30VDC EN60601-1-2Class B,EN55011Accessories(sold separately)CablesCBL-F9M9-20DB9female to DB9male serial cable,20cmApplicable Models:DE-311CBL-F9M9-150DB9female to DB9male serial cable,1.5mApplicable Models:DE-311NP21101DB25male to DB9female cable for RS-232transmission,30cmApplicable Models:DE-211NP21102DB25male to DB9male cable for RS-232transmission,30cmApplicable Models:DE-211NP21103DB25male to terminal block for RS-422/485transmissionApplicable Models:DE-211Terminal BlocksTB-M25DB25male DIN-rail wiring terminalApplicable Models:DE-211TB-M9DB9male DIN-rail wiring terminalApplicable Models:DE-311DIN-Rail Mounting KitsDK35A DIN-rail mounting kit,35mmPower AdaptersPWR-12050-WPAU-S2Non-locking barrel plug,12VDC,0.5A,100-240VAC,Australia(AU)plug,0to40°C operatingtemperaturePWR-12050-WPCN-S2Non-locking barrel plug,12VDC,0.5A,100-240VAC,China(CN)plug,0to40°C operatingtemperaturePWR-12050-WPEU-S2Non-locking barrel plug,12VDC,0.5A,100-240VAC,Continental Europe(EU)plug,0to40°Coperating temperaturePWR-12050-WPUK-S2Non-locking barrel plug,12VDC,0.5A,100-240VAC,United Kingdom(UK)plug,0to40°C operatingtemperaturePWR-12050-WPUSJP-S2Non-locking barrel plug,12VDC,0.5A,100-240VAC,United States/Japan(US/JP)plug,0to40°Coperating temperature©Moxa Inc.All rights reserved.Updated Jan18,2019.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
有了藍牙技術,您可以: • 用支援藍牙的手機將您的電腦連線到網際網路。 • 將您的電腦與一定距離範圍內的 Bluetooth 裝置進行連線。 • 在電腦與支援藍牙的手機之間同步資料。 • 在電腦上使用無線滑鼠、鍵盤或遊戲控制器。
包裝內容物
請檢查以下配件是否齊全:
華碩 USB-BT211 驅動程式與應用程式光碟(使用手冊、應用程式) 快速使用指南
第 1 章:認識您的 USB 藍牙接收器 藍牙(Bluetooth®)概觀......................................................................................1 包裝內容物................................................................................................................1 系統需求.....................................................................................................................1 USB-BT211 規格概要............................................................................................2
Windows® XP / Vista / 7 傳送典型值:51mA,接收典型值:43mA,待機 模式:15mA DC 5V,透過 USB 連接埠供電 <-85dBm 於 <0.1% BER 19.52 x 13.5 x 6.8 mm (L x W x H) 2.2g 0℃ ~ 60℃ (32℉ ~ 140℉) -10℃ ~ 70℃ (14℉ ~ 158℉) 5% ~ 90%,非凝結
iii
目錄內容
第 7 章:附錄 注意事項.................................................................................................................. 33 華碩的連絡資訊.................................................................................................... 35
• 第 3 章:配對 Bluetooth 裝置 本章節介紹如何配對您的電腦與其他 Bluetooth 裝置。
• 第 4 章:傳送與接收檔案 本章節介紹如何在您的電腦與其他Bluetooth 裝置之間傳輸檔案。
• 第 5 章:加入藍牙個人區域網路(PAN) 本章節介紹如何將您的電腦連線至藍牙個人區域網路(PAN)。
注意: 若以上列出的任何一項配件有損壞或是短缺的情形,請儘快與您的經 銷商聯絡。
系統需求
安裝華碩 USB 藍牙接收器之前,請確認您的系統/網路是否符合以下要 求: 作業系統:Microsoft® Windows® XP / Vista / 7 系統記憶體:64MB 或更大 硬碟空間:100MB
USB-BT211
• 第 6 章:管理 Bluetooth 裝置 本章節介紹如何管理您的Bluetooth 裝置。
• 第 7 章:附錄 本章節提供一些安規注意事項與安全性聲明。
提示符號
警告:提醒您在進行某一項工作時要注意您本身的安全。
小心:提醒您在進行某一項工作時要注意勿傷害到裝置元件。
重要:此符號表示您必須要遵照手冊所描述之Hale Waihona Puke 式完成一項或多 項軟硬體的安裝或設定。
iv
關於這本使用手冊
產品使用手冊包含了所有當您在安裝華碩 USB 藍牙接收器時所需用到的 資訊。
使用手冊的編排方式
使用手冊是由下面幾個章節所組成: • 第 1 章:認識您的 USB 藍牙接收器
本章節提供有關華碩 USB 藍牙接收器的包裝內容、系統需求與規格等資 訊。
• 第 2 章:開始使用 本章節介紹如何安裝與開啟 Bluetooth Suite。
ii
目錄內容
關於這本使用手冊................................................................................................... v 使用手冊的編排方式...................................................................................... v 提示符號.............................................................................................................. v
USB-BT211 迷你 USB 藍牙接收器
使用手冊
Windows® 7 作業系統適用
T5252 第1版 2010 年 2 月
版權所有‧不得翻印 © 2010 華碩電腦 本使用手冊包括但不限於其所包含的所有資訊受到著作權法之保護,未經華 碩電腦股份有限公司(以下簡稱「華碩」)許可,不得任意地仿製、拷貝、 謄抄、轉譯或為其它使用或處分。本使用手冊沒有任何型式的擔保、立場表 達或其它暗示。若有任何因本使用手冊或其所提到之產品的所有資訊,所引 起直接或間接的資料流失、利益損失或事業終止,華碩及其所屬員工恕不為 其擔負任何責任。除此之外,本使用手冊所提到的產品規格及資訊僅供參 考,內容亦會隨時更新,恕不另行通知。華碩不負責本使用手冊的任何錯誤 或疏失。 本使用手冊中所提及的產品名稱僅做為識別之用,而前述名稱可能是屬於其 它公司的註冊商標或是著作權。
第 2 章:開始使用 安裝 Bluetooth Suite...............................................................................................3 開啟 Bluetooth Suite...............................................................................................6 Bluetooth 裝置資料夾....................................................................................6 Bluetooth 設定對話視窗...............................................................................7 Bluetooth 選單...................................................................................................8
注意:提供有助於完成某項工作的訣竅與其它額外的資訊。

1認識您的
USB 藍牙接收器
藍牙(Bluetooth®)概觀
藍牙(Bluetooth®)是一種短距離無線技術,可使支援藍牙的裝置(如電 腦、移動裝置、耳機、GPS 接收器等)之間實現相互通訊。Bluetooth 裝置只 需在一定的範圍內,即可進行資料交換,而無需任何實體連線。

USB-BT211 規格概要
型號 標準 介面 範圍
藍牙設定檔(Profile)
頻段
調變方式
展頻 傳輸速度 (Maz) 支援作業系統
功耗
輸入電源 接收靈敏度 實體尺寸 重量 運作溫度 儲存溫度 溼度
USB-BT211 Bluetooth v2.1 + EDR USB 2.0/1.1 高達 100 公尺 A2DP, AVRCP, BIP, DUNP, FAX, FTP, HCRP, HID, GAP, OPP, PAN, SPP, SYNC, HSP, HFP, BPP, SAP 2.400 ~ 2.4835GHz 無需許可的 ISM 頻段 GFSK 於 1Mbps,π/4-DQPSK 於 2Mbps,8-DPSK 於 3Mbps FHSS(跳頻展頻) 最大 UARTbaud 速度 3Mbps
第 3 章:配對 Bluetooth 裝置 配對電腦與其他 Bluetooth 裝置....................................................................12
第 4 章:傳送與接收檔案 開啟 Bluetooth 檔案傳輸精靈.........................................................................15 傳送檔案到 Bluetooth 裝置..............................................................................15 從 Bluetooth 裝置接收檔案..............................................................................18 藍牙個人區域網路(PAN)概觀.................................................................... 21
第 5 章:加入藍牙個人區域網路 (PAN) 連線到藍牙 PAN...................................................................................................22
相关文档
最新文档