模具进度表中英文版
改模进度计划表
日 25 26 27 28 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 2 3 4 5 6 7 8 9 10
SLA Approval 2D、3D图纸冻结
项目、技 术
T1 第一次送检
计划 实际
Repairing of die casting tool 模具尺寸修复
计划 实际
2nd trial casting T2 第二次试模
Inspect initial rough part
T2第二次送检
计划 实际 计划
实际
Working out production process 工艺制作
计划 实际
Tooling Drawing Approval 模具结构图确认
技术
计划 实际
Cavity Block Preparing 镶件备料
采购
计划 实际
Detail Drawing 模具零件图
技术
计划 实际
Rough Machining of Cavity 镶件粗加工
编程
计划 实际
Heat Treatment 热处理
XXX机械有限公司
模具改模计划进度表
表单编号：XX.T/TD.10-01/GY-01模具编号: 2源自零件名称:零件图号:
启动时间：
制造周期：
第一次试模时间：
第一次送样时间：
项目负责人:
技术负责人：
模具负责人：
检测负责人：
阶段负责人 职称 里程碑 月
Month
2018.6
2018.7
模具中英文
模芯 Parting Core码模槽 Clamp Slot后模镶针 Core Pin局部视图 Partial View撑头 Support Pillar拉圾钉 Stop Pin冷料# Cold Slag螺牙1/2-13 Eye Bolt 1/2-13Tap有托顶针 Shoulder Ejector Pin线切割 Wire E.D.M导柱位 Leader Pin Location顶针板导套 Guided Ejection Bushing轮廊 Contour耐落胶 Teflon Paste针板导柱 Guided Ejection Leader Pin螺纹孔 Tapping Hole偏移量 Offset唧嘴 Sprue Bushing连接件 Fittings水塞 Water Line Plug三板模延伸式唧嘴Extension Nozzle Bushing 斜针 Angle Pin撬模脚 Ppy Slot水口板导套 Runner Stripper Plate Bushing接合 Engage重新加工 Reworked定位圈（法兰） Locating Ring替换镶件Interchangeable Mold Insert配件 Components产品编号 Part Nos指定吨位的注塑机 Specific Press补偿 Compensation缩水 Shrinkage版本 Rev水嘴接头 Water Fittings平面度 Parallel模胚 Mold Base螺纹 Eyebolt Thread倒角 Chamfer下模镶件 Core Block回针 Stop Pin模胚 Mold Base上模镶件 Cavity Block二级顶出针 Sub-Leaderd Pin热嘴 Hotnozzle小镶件 Sub-Insert镶件 Mold Insert火花机 Edm下模小镶件 Core Sub-Insert加硬 Harden熔接线 Weildline上模小镶件 Cavity Sub-Insert唧嘴 Sprue压机 Press行位 Slide设计筒图 Design Preliminary晒纹 Texturing行位镶件 Slide Insert名称块表 Title Block梯形 Trapezoid压条 Gib版本标识 Revision Level凸缘、法兰 Flange压紧块（铲机） Jaw材料清单 Stock List方铁 Spacer Block硬片（摩擦片） Wear Plate制模 Build Mold顶针板 Ejector Plate水口铁 Runner Bar手动滑块 Hand Slide顶针底板 Ejector Retainer Plate上模水口铁 Upper Runner Bar漏水测试 Leak Test垫板 Retainer Plate下模水口铁 Lower Runner Bar流道排气 Runner Vents管钉（定位销） Dowel Pin弹簧 Spring水口勾针 Sprue Puller Pin抛光 Draw Polish管状管钉 Tubular Dowel顶针 Ejector Pin侧抽芯 Side Action吊环 Safety Hoist Ring撑头 Support Pillar加强筋 Reinforcing日期印 Dating Insert直身锁 Side Lock三角撑 Gusset环保印 Recycling Insert斜度锁 Interlock柱子 Bossed气顶 Air Poppet Valve锁模板 Safety Bar‘O’令密封圈 O'Ring 隔水片 Baffle出模斜度 Draft截水口镶件 Runner Shut-Off Insert控制开关 Switch定位圈（法兰） Locating Ring管钉（定位销） Dowel Pin回针 Return Pin管状管钉 Tubular Dowel吊环 Safety Hoist Ring斜导柱 Angle Pin日期印 Dating Insert环保印 Recycling Insert<推板 Stripper PlateA’板 A'Plate装卸孔 Handling Hole运输安全带 MoldstrapB’板 B'Plate客户 Client产品名 Part Name方铁（垫铁）Spacer Block波子螺丝（行位定位螺丝） Ball-Catch顶针板 Ejector Plate斜顶 Lifter外廊 Contour顶针底板 Ejector Retainer Plate落单会议 Kick-Off Meeting早回 Early Ejector Return垫板 Retainer Plate垃圾钉 Stop Pin加速项 Accelerated Ejector喉塞 Plug有托顶针 Shoulder Ejector Pin唧嘴 Sprue Bushing顶针板导套 Guided Ejection Bushing针板导柱 Guided Ejection Leader Pin水口板导套 Runner Stripper Plate Bushing三板模延伸式唧嘴Extension Nozzle Bushing。
CQI-27第二版中英文-工艺表G-铝金属模具
Metal Chemistry 金属化学
B2.4 B2.5
Chemistry 化学 Chemistry 化学
C2.4 C2.5
A2.4
Chemistry 化学
B2.6
Metal Temperature 铝水温度
C2.6
A2.5
Chemistry 化学
B2.7
Inoculation 接种
Tube Traceability 管的可追溯性
Nodularity Control for ductile iron
球墨铸铁的球化控制
Extraction 取出
C7.7 C7.8 C7.9
A6.2
Shot Blast 抛丸清理
B7.1
A6.3
Trimming/Grinding Operation 修边/磨削操作
C2.7
A2.6
Metal Temperature 铝水温度
B2.8
Carbon Raiser 积碳器
C2.8
A2.7
Cast Iron Inoculation 铸铁接种
3.0 Magnesium Treatment 镁处理 3.0
A2.8
Carbon Raiser 积碳器
B3.1
Treatment Ladle 浇包
Cored Wire Magnesium Treatment 芯线镁处理
A3.10
Magnesium Reaction Time 镁反应时间
4.0 Metal Control 金属控制
A3.11
Chemistry Control 化学控制
A3.12
Cored Wire Magnesium Treatment 芯线镁处理
级进模具冲压过程流程图(中英文对照)
表面质量(碰伤、划伤)SURFACE QUALITY(DAMAGE、SEVERE SCRATSHE)
机床设定SETUP THE MACHINE
5
送料TRANSMITTING THE MATERIAL
机床稳定性STABILITY OF THE MACHINE
表面质量(碰伤、划伤)SURFACE QUALITY(DAMAGE、SEVERE SCRATSHE)
PRODUCT SPECIALITY
PROCESS SPECIALITY
对称度、尺寸、跳动、毛刺SYMMETRY、 DIMENSION、JUMPINESS、BURR
机床、模具设定SETUP THE MACHINE AND THE TOOL
表面质量(碰伤、氧化)SURFACE QUALITY(DAMAGE、OXIDATION)
产品名称 Part Name 模具号 Die Number 编制 Prepared
工序号
工艺流程 PROCESS CHART
冲压 过程流程图
产品编号 P/N 客户编号 Cust.
P/N 审批
Approved
工序名称
STAMPING
变差来源
PROCESS FLOW CHART
文件编号 No. 版本号 Revision No. 生效日期 Released Date
库存周转STORAGE TURNOVER
表面质量(碰伤、划伤)SURFACE QUALITY(DAMAGE、SEVERE SCRATSHE)
行车设定SETUP THE TRAVELLING CRANE
4
矫平材料FLATING THE MATERIAL
行车稳定性 STABILITY OF THE TRAVELLING CRANE
模具工业中英文翻译
模具工业中英文翻译模具常用术语中英文对照局部视图 Partial View冷料# Cold Slag线切割 Wire E.D.M轮廊 Contour螺纹孔 Tapping Hole连接件 Fittings斜针 Angle Pin接合 Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机 Specific Press水嘴接头 Water Fittings螺纹 Eyebolt Thread回针 Stop Pin二级顶出针Sub-Leaderd Pin镶件 Mold Insert 加硬 Harden唧嘴 Sprue设计筒图 Design Preliminary名称块表 Title Block版本标识 Revision Level材料清单 Stock List制模 Build Mold手动滑块 Hand Slide漏水测试 Leak Test流道排气 Runner Vents抛光 Draw Polish侧抽芯 Side Action加强筋 Reinforcing三角撑 Gusset柱子 Bossed出模斜度 Draft外廊 Contour落单会议 Kick-Off Meeting装卸孔 Handling Hole运输安全带 Moldstrap码模槽 Clamp Slot撑头 Support Pillar螺牙1/2-13 Eye Bolt 1/2-13Tap 导柱位 Leader Pin Location耐落胶 Teflon Paste偏移量 Offset水塞 Water Line Plug撬模脚 Ppy Slot重新加工 Reworked配件 Components补偿 Compensation平面度 Parallel倒角 Chamfer模胚 Mold Base热嘴 Hotnozzle火花机 Edm熔接线 Weildline压机 Press晒纹 Texturing梯形 Trapezoid凸缘、法兰 Flange方铁 Spacer Block顶针板 Ejector Plate顶针底板 Ejector Retainer Plate垫板 Retainer Plate后模镶针 Core Pin拉圾钉 Stop Pin有托顶针 Shoulder Ejector Pin顶针板导套 Guided Ejection Bushing针板导柱 Guided Ejection Leader Pin唧嘴 Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing定位圈（法兰） Locating Ring管钉（定位销） Dowel Pin管状管钉 Tubular Dowel吊环 Safety Hoist Ring日期印 Dating Insert环保印 Recycling Insert气顶 Air Poppet Valve截水口镶件 Runner Shut-Off Insert早回 Early Ejector Return加速项 Accelerated Ejector客户 Client 产品名 Part Name产品编号 Part No 缩水 Shrinkage版本 Rev 模胚 Mold Base下模镶件 Core Block上模镶件 Cavity Block小镶件 Sub-Insert下模小镶件 Core Sub-Insert上模小镶件 Cavity Sub-Insert行位 Slide行位镶件 Slide Insert压条 Gib压紧块（铲机） Jaw硬片（摩擦片） Wear Plate水口铁 Runner Bar上模水口铁 Upper Runner Bar下模水口铁 Lower Runner Bar弹簧 Spring水口勾针 Sprue Puller Pin顶针 Ejector Pin撑头 Support Pillar直身锁 Side Lock斜度锁 Interlock锁模板 Safety Bar‘O’令（密封圈） O'Ring喉塞 Plug隔水片 Baffle波子螺丝（行位定位螺丝） Ball-Catch 斜顶 Lifter控制开关 Switch回针 Return Pin斜导柱 Angle Pin推板 Stripper PlateA’板 A'PlateB’板 B'Plate方铁（垫铁）Spacer Block顶针板 Ejector Plate顶针底板 Ejector Retainer Plate垫板 Retainer Plate垃圾钉 Stop Pin有托顶针 Shoulder Ejector Pin顶针板导套 Guided Ejection Bushing针板导柱 Guided Ejection Leader Pin唧嘴 Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing定位圈（法兰） Locating Ring管钉（定位销） Dowel Pin管状管钉 Tubular Dowel吊环 Safety Hoist Ring日期印 Dating Insert环保印 Recycling Insert气顶 Air Poppet Valve截水口镶件 Runner Shut-Off Insert早回 Early Ejector Return加速顶 Accelerated Ejector扁顶 Blade 出模斜波 Draft手动滑块模具 Hand Slide-In Type Mold回针板 Backup合模 Shutoff空隙槽 Clearance Slot导柱及导套 Leader Pin Bushing水口拉钩 Spuer Puller模框镶件Pocket Insert成型热固性塑胶模具Thermoset Mold 三板模 3-Plat Mold分型面 Parting Line司筒 Ejector Sleeve垫圈 Washer熔接线（夹水纹） Weldline吸针 Sucker Pin回针板 Retainer Plate顶出板 Knock -Out Plate电动安全开关Electrical-Safety Switch 脱开 Cut Of Position预先决定 Preload缓冲器 Bumper衬垫 Cushion公差 Tolerance突然性动作 Slam销针 Dowel钩槽 Gib精磨 Finished通框 Through Window粘后模 Sticking Core粘水口 Sticking Sprue夹水纹 Weld Line变形 Warpage走水不平均 Filling Uneven走不齐 Short Shot挂成品 Part Hanging漏水 Water Leakage刮花（擦伤） Galling漏电 Ele Leakage困气 Air Trapping温度 Temperature注塑模 Injection Mold入水 Gate试板 Sampling压力 Pressure倒圆 Fillet顶棍 Ejector顶白 Stress Mark粘前模 Sticking Cav名称块表 Title Block版本标识 Revision Level材料清单 Stock List斜导柱（斜边） Angle PinA板 A'plateB板 B'plate倒扣 Under-Cut披峰 Flash缩水 Sink Mark氮化 Nitride不规则四边形Trapezoid缩水 Shrinkage连续的 Consecutive雕刻 Engrave出模角 Draft分模面 Parting Surface擦位 Shut-Off(S/0)导套 Bushing回针 Return Pin加硬 Harden唧嘴 Sprue设计筒图 Design Preliminary 丝印 Silkprint不干胶 Adhesive Sticker导向针 Guide Din公差 Tolerance线切割 Wire-Cut电火花 Edm抛光 Polishing蚀纹 Texture探热针 Thermocouple三打螺丝毫（限螺丝） Stripper Bolt 盖板 Cover Plate齿轮 Gear油唧 Hydraulic Cylinder司筒 Ejector Sleeve导柱 Leader Pin冷料# Cold Slag线切割 Wire E.D.M.轮廓 Contour螺纹孔 Tapping Hole连接件 Fittings斜针 Angle Pin接合 Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press水嘴接头 Water Fittings螺纹 Eyebolt Thread回针 Stop Pin二级顶出针 Sub-Leader Pin镶件 Mold Insert锁定位 Lock楔子(铲鸡) Wedge高产量模量 High V olume Running Mold 剖面图 Cross Section 模具结构 Mold Construction模芯 Parting Core局部视图 Partial View热流道 Manifold热嘴 Hot Nozzle型腔数 Cav No模号 Mold No胶料 Material尺寸 Dimension重要尺寸 Critical Dimension雕刻 EngraveAssembly line组装线Layout布置图Conveyer流水线物料板Rivet table拉钉机Rivet gun拉钉枪Screw driver起子Pneumatic screw driver气动起子worktable 工作桌OOBA开箱检查fit together组装在一起fasten锁紧(螺丝)fixture 夹具(治具)pallet栈板barcode条码barcode scanner条码扫描器fuse together熔合fuse machine热熔机repair修理operator作业员QC品管supervisor 课长ME制造工程师MT制造生技cosmetic inspect外观检查inner parts inspect内部检查thumb screw大头螺丝lbs. inch镑、英寸EMI gasket导电条front plate前板rear plate后板chassis 基座bezel panel面板power button电源按键reset button重置键Hi-pot test of SPS高源高压测试V oltage switch of SPS 电源电压接拉键sheet metal parts 冲件plastic parts塑胶件SOP制造作业程序material check list物料检查表work cell工作间trolley台车carton纸箱sub-line支线left fork叉车personnel resource department 人力资源部production department生产部门planning department企划部QC Section品管科stamping factory冲压厂painting factory烤漆厂molding factory成型厂common equipment常用设备uncoiler and straightener整平机punching machine 冲床robot机械手hydraulic machine油压机lathe车床planer |'plein?|刨床miller铣床grinder磨床linear cutting线切割electrical sparkle电火花welder电焊机staker=reviting machine铆合机position职务president董事长general manager总经理special assistant manager特助factory director厂长department director部长deputy manager | =vice manager副理section supervisor课长deputy section supervisor =vice section superisor 副课长group leader/supervisor组长line supervisor线长assistant manager助理to move, to carry, to handle搬运be put in storage入库pack packing包装to apply oil擦油to file burr 锉毛刺final inspection终检to connect material接料to reverse material 翻料wet station沾湿台Tiana天那水cleaning cloth抹布to load material上料to unload material卸料to return material/stock to退料scraped |'skr?pid|报废scrape ..v.刮;削deficient purchase来料不良manufacture procedure制程deficient manufacturing procedure制程不良oxidation |' ksi'dei?n|氧化scratch刮伤dents压痕defective upsiding down抽芽不良defective to staking铆合不良embedded lump镶块feeding is not in place送料不到位stamping-missing漏冲production capacity生产力education and training教育与训练proposal improvement提案改善spare parts=buffer备件forklift叉车trailer=long vehicle拖板车compound die合模die locker锁模器pressure plate=plate pinch压板bolt螺栓administration/general affairs dept总务部automatic screwdriver电动启子thickness gauge厚薄规gauge(or jig)治具power wire电源线buzzer蜂鸣器defective product label不良标签identifying sheet list标示单location地点present members出席人员subject主题conclusion结论decision items决议事项responsible department负责单位pre-fixed finishing date预定完成日approved by / checked by / prepared by核准/审核/ 承办PCE assembly production schedule sheet PCE组装厂生产排配表model机锺work order工令revision版次remark备注production control confirmation生产确认checked by初审approved by核准department部门stock age analysis sheet 库存货龄分析表on-hand inventory现有库存available material良品可使用obsolete material良品已呆滞to be inspected or reworked 待验或重工total合计cause description原因说明part number/ P/N 料号type形态item/group/class类别quality品质prepared by制表notes说明yearend physical inventory difference analysis sheet 年终盘点差异分析表physical inventory盘点数量physical count quantity帐面数量difference quantity差异量cause analysis原因分析raw materials原料materials物料finished product成品semi-finished product半成品packing materials包材good product/accepted goods/ accepted parts/ good parts 良品defective product/non-good parts不良品disposed goods处理品warehouse/hub仓库on way location在途仓oversea location海外仓spare parts physical inventory list备品盘点清单spare molds location模具备品仓skid/pallet栈板tox machine自铆机wire EDM线割EDM放电机coil stock卷料sheet stock片料tolerance工差score=groove压线cam block滑块pilot导正筒trim剪外边pierce剪内边drag form压锻差pocket for the punch head挂钩槽slug hole废料孔feature die公母模expansion dwg展开图radius半径shim(wedge)楔子torch-flame cut火焰切割set screw止付螺丝form block折刀stop pin定位销round pierce punch=die button圆冲子shape punch=die insert异形子stock locater block定位块under cut=scrap chopper清角active plate活动板baffle plate挡块cover plate盖板male die公模female die母模groove punch压线冲子air-cushion eject-rod气垫顶杆spring-box eject-plate弹簧箱顶板bushing block衬套insert 入块club car高尔夫球车capability能力parameter参数factor系数phosphate皮膜化成viscosity涂料粘度alkalidipping脱脂main manifold主集流脉bezel斜视规blanking穿落模dejecting顶固模demagnetization去磁;消磁high-speed transmission高速传递heat dissipation热传rack 上料degrease脱脂rinse水洗alkaline etch龄咬desmut剥黑膜D.I. rinse纯水次Chromate铬酸处理Anodize阳性处理seal封孔revision版次part number/P/N料号good products良品scraped products报放心品defective products不良品finished products成品disposed products处理品barcode条码flow chart流程表单assembly组装stamping冲压molding成型spare parts=buffer备品coordinate座标dismantle the die折模auxiliary fuction辅助功能poly-line多义线heater band 加热片thermocouple热电偶sand blasting喷沙grit 砂砾derusting machine除锈机degate打浇口dryer烘干机induction感应induction light感应光response=reaction=interaction感应ram连杆edge finder巡边器concave凸convex凹short射料不足nick缺口speck瑕??shine亮班splay 银纹gas mark焦痕delamination起鳞cold slug冷块blush 导色gouge沟槽;凿槽satin texture段面咬花witness line证示线patent专利grit沙砾granule=peuet=grain细粒grit maker抽粒机cushion缓冲magnalium镁铝合金magnesium镁金metal plate钣金lathe车mill锉plane刨grind磨drill铝boring镗blinster气泡fillet镶;嵌边through-hole form通孔形式voller pin formality滚针形式cam driver铡楔shank摸柄crank shaft曲柄轴augular offset角度偏差velocity速度production tempo生产进度现状torque扭矩spline=the multiple keys花键quenching淬火tempering回火annealing退火carbonization碳化tungsten high speed steel钨高速的moly high speed steel钼高速的organic solvent有机溶剂bracket小磁导liaison联络单volatile挥发性resistance电阻ion离子titrator滴定仪beacon警示灯coolant冷却液crusher破碎机。
模具进度表跟踪表
2016.09.19 2016.09.23 2016.09.28 2016.10.02 2016.10.30 2016.10.09 2016.10.16 2016.10.26 2016.10.26 2016.10.26 2016.10.28 2016.11.01 2016.11.04 2016.11.08 2016.1/状态
前期准备工作（技术沟通、合同签定、预付款到位） 模具结构图设计 模具零件图设计 模芯备料 模座备料（标准模架） 模芯粗加工（包含打孔、CNC加工） 热处理 电极制作 模芯精加工 电火花 模芯线切割 打光 模芯装配 模框组装 T0试模 修模+检测 T1试模 铸件检测 模具后期制作 发运
Actual Target Percent complete * in 10% increments/每 Target starting completio completion date/ date /计划开工日期 格为10%的完成率 n date/实际 计划完工日期 完工日期 100% 100% 100% 100% 70% 100% 100% 100% 100% 100% 100% 100% 0% 0% 0% 0% 0% 0% 0% Editor/编制:
2016.06.26 2016.09.18 2016.09.22 2016.09.24 2016.09.30 2016.10.03 2016.10.09 2016.10.06 2016.10.17 2016.10.21 2016.10.19 2016.10.29 2016.11.02 2016.11.04 2016.11.09
预计11.08
11.15
Checker/审核： Date:
Validation: Issued by: 注：计划是从签定合同开始，如签定时间提早或延期，进度也相应调整
模具工序中英文对照表
中英文工序对照表
中文名称冲导正孔 切边空步折弯成型整型撕裂旋转拍平冲孔切离
英文名称PIERC PILOT TRIM IDLE BEND FIRN RESTROKE SPLIT TIP FLATTEN PIERCE PIRT OFF 中文名称拉伸预拉伸预成型预冲孔折角仔半剪落料切舌围边翻边翻孔
英文名称DRAW PRE-DRAW PRE FORM PRE-PIERCE BEND TAB HALF CUT BLANK LANCE FLANGE FLANGE EXTRUDE HOLE 中文名称侧成型侧冲孔向上围边向下围边打凸包面押刻字压平再次修边切废料分离
英文名称CAM FORM CAM PRC UP FLANGE DOWN FLANGE KICK UP COIN/RESTRIKE STAMP FLATTEN RETRIMCUT SCRAP SEPARATE 中文名称侧切向下成型向上成形侧整形连剪带折推平
英文名称CAM CUT FORN DOWN FORM DOWN CAM RESTROKE CUT AND BEND CAM FORM
英文名称TRANSFER复合落料单工程
机械手COMP. manual
LE。
0800123UGNX模具设计_注塑模中英文对照_1002
0800123UGNX模具设计_注塑模中英文对照_1002附录A1（中英文对照表-零件类1）中文名称英文名称中文别称1. 零件类（模板）模架mold base 模胚隔热板thermal insulation board定模座板top clamping plate 定模底板、面板热流道板hot runner manifold 分流板推流道板runner stripper plate 脱料板、水口推板、水口板型腔固定板cavity plate 定模板、定模框、A板、母模推件板stripper plate 脱模板型芯固定板core plate 动模板、动模框、B板、公模支承板support plate 垫板、托板垫块spacer block 模脚、方铁、登仔推杆固定板ejector retainer plate 顶针固定板、面针板推板ejector plate 推顶杆板、顶针垫板、底针板动模座板bottom clamping plate 动模底板、底板2. 零件类（浇注系统）定位圈locating ring 定位环、法蓝浇口套sprue bushing 浇口衬套、唧咀、唧嘴浇口镶块gating insert 入水镶件拉料杆sprue puller 拉料销、水口勾针热流道系统hot runner system流道板runner plate温流道板warm runner plate分流锥sprue spreader二级喷嘴secondary nozzle鱼雷形组合体torpedo body assembly管式加热器cartridge heater 筒式加热器热管heat pipe 导热管加热圈heating ring热电偶thermocouple 探针、探温针阀式热嘴valve gating nozzle 阀针式热嘴、阀节喷嘴阀针valve pin热嘴hot nozzle 热喷嘴热嘴垫圈nozzle seat3. 零件类（顶出系统）推杆ejector pin 顶杆、顶针带肩推杆shouldered ejector pin 阶梯推杆、台阶顶针扁推杆flat ejector pin 扁顶杆、扁顶针推管ejector sleeve 司筒、顶管、套筒推管芯子ejector sleeve pin 中心销、司筒针中文名称英文名称中文别称3. 零件类（顶出系统）推块ejector pad 顶块推件环stripper ring 脱模圈斜顶杆angle ejector rod 斜导杆斜顶lifter自润滑活型芯组件slide core guide unit 斜顶滑座导滑座slide base斜导杆固定座angle ejector rod fixed seat自润滑板guide plate挡块baffle block挡块固定螺钉baffle block set screw复位杆return pin 回程销、回针限位块stop block 止动件限位钉stop pin 垃圾钉4. 零件类（成型零部件）型腔cavity 母模仁型芯core 公模仁、模芯侧型芯side core 侧模芯镶件mould insert 镶块型腔镶件cavity insert 上内模、母模入子型芯镶件core insert 下内模、公模入子活动镶件movable insert 拼块split螺纹型芯threaded core螺纹型环threaded cavity嵌件insert镶针insert pin5. 零件类（温度调节系统）快速接头jiffy quick connector管接头hose nippler三通接头three way cock四通接头four-way connection弯管接头pipe bend水嘴water nozzle 水接头油嘴oil nozzle 油接头软管hose 喉管水管water tube油管oil tube气管air tube中文名称英文名称中文别称5. 零件类（温度调节系统）管夹hose clip 软管卡子丝堵pipe plug 螺塞、喉塞冷却管cooling pipe隔水片baffle 挡水板O形圈o-ring 密封圈、O形环止水栓stopcock 导流塞流量计flow meter集水器siamese 集水块集油器oil collector 集油块节流阀throttle valve 截流阀流量分配器flow divider 分流器6. 零件类（侧向分型与抽芯机构）滑块slide 行位斜导柱angle pin 斜销、斜导边弯销clog-leg cam锁紧块locking block 楔紧块、铲鸡滑块导板slide glide strip 滑块导轨、压条耐磨板wear plate 硬片、油板球头顶丝ball plunger 波子螺丝、波子弹弓限位块stop block 止动件滑块定位器slide retainer 行位管位7. 零件类（导向、定位系统）导柱guide pin 边钉、导边直身导柱straight leader pins 直导柱带肩导柱shoulder leader pin 台阶导柱推板导柱ejector guide pin 中托边方型导柱guide square 方导柱三板模导柱support pins 细水口导边、水口边三板模导套runner stripper plate bushing 水口板导套、水口套导向条gib block 导向块导套guide bushing 边司直导套straight bushing带肩导套shoulder bushing 有托导套推板导套ejector guide bush 中托司套定位销dowel pin 销钉、管钉定位块locating block直身锁side lock 边锁、侧锁扣、直身定位块斜度锁taper lock 斜度定位块中文名称英文名称中文别称8. 零件类（开关模控制）定距拉杆puller bolt 拉杆螺丝、拉杆定距拉板puller plate 拉板止动螺钉stop bolt 限动螺栓锁模板safety bar 安全杆、锁模扣、安全扣阻尼销parting locks 尼龙拉钩、树脂开闭器、拉模扣分型面锁模装置parting lock set 分型拉钩、扣鸡、扣机顶出预复位机构early ejector return 早回机构、先复位机构9. 零件类（其他功能件）螺钉screw 螺丝螺帽screw cap 螺丝帽内六角螺钉shcs 杯头螺丝内六角沉头螺钉fhcs 平头螺丝无头螺丝grub screw弹簧spring 弹弓圆线弹簧wire spring扁弹簧flat spring氮气弹簧gas spring齿轮gear wheel轴承bearing马达motor止动键locking key卡簧clamp spring油缸hydraulic cylinder 液压缸气缸air cylinder排气阀air evacuation valve支撑柱support pillar 支承柱、撑头承压块pressure block吊模块lifting bars for mold 模具起吊块吊环lifting eye bolts 吊环螺钉挤紧块clamping block 锁定块垫圈washer 垫片弹簧垫圈spring washer 弹垫标牌nameplate铭牌保护盖protective cover 防护罩顶模块ejector rod 顶出杆、顶棍行程开关position limit switch 限位开关计数器counters中文名称英文名称中文别称9. 零件类（其他功能件）压力传感器pressure transducer日期章date markers 日期标记电源插座power socket公插male connector母插female connector电线electric wire接线盒connection box 接线箱保护盒protection box保护柱stand off调整板adjustment plate压板stopper plate中文名称英文名称中文别称10. 相关术语类(设计系统)模具工程mold engineering工程力学engineering mechanics工程热力学engineering thermodynamics流变学rheology塑料成形模具mould for plastics 塑料模、塑胶模注射模injection mould 注塑模注射模设计design of injection mould 热塑性塑料注射模injection mould forthermoplastics热固性塑料注射模injection mould for thermoses双色模double-color mould叠层模stack injection mould热流道模hot runner mould绝热流道模insulated runner mould 温流道模二板模two plate mold 大水口模三板模three plates mold 细水口模浇注系统feed system冷流道系统cold runner system主流道sprue 注入口、注道分流道runner浇口gate 入水浇口形式gate type 入水形式浇口大小gate size 入水大小浇口位置gate location 入水位置直接浇口direct gate 大水口环形浇口ring gate 环型浇口盘形浇口dish gate轮辐浇口spoke gate点浇口pin-point gate 细水口、针点式浇口侧浇口edge gate 边缘浇口潜伏浇口submarine gate 潜水口隧道式浇口tunnel gate 月牙形浇口、牛角形浇口、香蕉形浇口冷料穴cold-slug well 冷料井溢料槽flash groove 跑胶道、流胶沟排气槽air vent 排气道、排气孔、疏气位分型面parting surface 分模面分型线parting line 分模线中文名称英文名称中文别称10. 相关术语类(设计系统)水平分型面（线）horizontal parting line垂直分型面（线）vertical parting line定模fixed half 固定侧动模moving half 可动侧排气系统vent system顶出系统ejection system 脱模系统顶出机构ejection mechanisms 脱模机构成型零部件molding parts冷却系统cooling system冷却通道cooling channel加热系统heating system 供热系统收缩率shrinkage 缩水抽芯力core-pulling force抽芯距core-pulling distance投影面积projected area脱模斜度draft 拔模斜度模具寿命die life模腔数cavity number11. 相关术语类(注塑成型)注射机injection molding machine 注塑机、射出成型机、啤机注射能力shot capacity 注塑容量、注塑能力注射压力injection pressure 注塑压力、射胶压力锁模力clamping force 合模力成型压力moulding pressure 成形压力模内压力internal mould pressure 型腔压力开模力mould opening force脱模力ejection force 顶出力闭合高度mould-shut height最大开距maximum daylight 模板开距脱模距stripper distance最大容模厚度max mold height 最大模厚最小容模厚度min. mould thickness 最小模厚拉杆内距space between tie bars 拉杆间距、导柱内距注射装置injection unit 射胶系统预塑化装置preplasticator合模装置clamping unit 锁模系统控制装置control unit 控制系统机械手mechanical arm 机械臂中文名称英文名称中文别称11. 相关术语类(注塑成型)快速换模系统quick die change system 快速换模装置顺序阀sequence valve喷嘴直径nozzle diameter喷嘴球半径nozzle radius成型周期molding cycle 模塑周期注射时间injection time 射出时间保压时间packing time冷却时间cooling time顶出时间ejection time 脱模时间开、合模时间time of mold open & close塑料Plastics 塑胶塑件plastic parts 塑胶件项目名称project name产品名称product name 品名外观件appearance part总产量total product电镀plating 喷镀油漆paint蚀纹texture 咬花光面shiny side热板焊hot plate welding超声波焊ultrasonic welding 超声焊摩擦焊friction welding振动焊vibration welding壁厚wall thickness加强筋rib圆角fillet尖角sharp corner 锐角、利角凸台convex plate文字text孔位hole location工艺分析process analysis 过程分析流动分析flow analysis 充填分析顶白ejected mark 顶痕毛刺burr 毛边缩痕sink mark 凹痕水波痕water wave effect表面光泽度不良gloss ng中文名称英文名称中文别称11. 相关术语类(注塑成型)银丝纹silver streak 银条纹、银丝气泡bubble黑条纹dark streak烧焦burn 烧伤、烧黑黑点black spots 黑色斑翘曲warpage熔接线weld lines 熔合线熔接痕welding mark 溶合痕尺寸不稳定dimensional instability裂痕flaw 裂缝变色discoloration 褪色困气air trapping缺胶short shot 充填不足、欠注、短射试模mold trial注射速度injection rate 注射速率干燥温度drying temperature 烘干温度干燥时间drying time 烘干时间成型温度injection temperature 注塑温度、喷射温度模具温度mould temperature12. 相关术语类(材料)模板mould plate标准件standard parts电极electrode铜电极copper electrode 铜公石墨电极graphite electrode钨电极tungsten electrode钢steel 钢铁、钢材热作钢hot work tool steel 热锻模具钢冷作钢cold work steel预硬钢prehardened steel碳素钢carbon steel 碳钢碳素工具钢carbon tool steel不锈钢stainless steel铬钼钢chrome molybdenum steel合金工具钢alloy tool steel高速工具钢high speed tool steel硬质合金钢hard alloy steel弹簧钢spring steel中文名称英文名称中文别称12. 相关术语类(材料)灰口铸铁grey cast iron 灰铸铁、灰口铁紫铜copper黄铜brass青铜bronze铍铜BeCu铍青铜beryllium bronze铝aluminum13. 相关术语类(技术参数)结晶性crystallinity 结晶度透明性transparency 透明度耐热性heat resistance 抗热性熔融指数melt index 熔体流动指数剪切速率shear rate 剪切率剪切应力shear stress摩擦系数frictional coefficient布氏硬度brinell hardness HB洛氏硬度rockwell hardness HRC肖氏硬度shore hardness Hs维氏硬度vickers hardness HV金属疲劳metal fatigue疲劳寿命fatigue life密度density重量weight重心centre of gravity面积area体积volume承压面积bearing area 支承面积雷诺数reynolds number导热性thermal conductivity 导热率、导热系数比热容specific heat 比热热量heat quantity温差temperature difference弹性模量modulus of elasticity 弹性模数、杨氏模量截面惯性矩second moment of area 截面二次轴矩截面模量section modulus 截面系数泊松比poisson ratio 横向变形系数拉伸强度tensile strength 抗拉强度压缩强度compressive strength 抗压强度中文名称英文名称中文别称13. 相关术语类(技术参数)屈服强度yield strength剪切强度shear strength 抗剪强度冲击强度impact strength 抗冲强度扭曲强度torsional strength 抗扭强度、扭转强度弯曲强度bending strength 抗弯强度、抗挠强度屈服应力yield stress 延展率elongation 延伸率载荷load弹性变形elastic deformation 弹性形变热膨胀系数thermal expansion coefficient14. 相关术语类(表面处理)热处理heat treatment调质thermal refining TR渗碳carburizing退火annealing回火tempering氮化nitriding NT、渗氮真空氮化vacuum nitriding 真空渗氮真空渗碳氮化vacuum carbonitriding 真空碳氮化离子氮化plasma nitriding离子渗碳氮化ion carbonitriding淬火quenching hardening QH高频淬火high frequency hardening真空淬火vacuum hardening化学电镀chemical plating 化学镀阳极氧化处理anodizing 阳极氧化发黑blackening 染黑法喷砂处理sand blast时效处理seasoning15. 相关术语类(加工)加工中心机床machine centers 加工中心CNC铣床cnc milling machine 数控铣床高速铣床high speed milling machine仿形铣床profiling milling machine 靠模铣床仿形车床copy lathe 靠模车床锯床saw machine刨床planing machines磨床grinding machines中文名称英文名称中文别称15. 相关术语类(加工)车床lathe摇臂钻床radial drilling machine 旋臂钻床钻床drilling machine 钻孔机雕刻机engraving machines电火花机electric discharge machines 火花机线切割放电机wire E.D.M. 线割放电加工机测量机measuring machines三座标测量仪three-coordinates measuringmachine合模机die spotting machine机加工machining 切削加工锻造forging铸造casting精密压铸accurate die casting电铸electroforming热轧hot rolling HR冷轧cold rolling 冷压延拉拔draw out挤压extrusion 挤制加工锯削sawing雕削carving-and-scraping铣削milling镗削boring锉削加工filing车削turning钻孔drilling铰孔reaming 铰孔修润拉削broaching刮削scraping磨削grinding研磨加工lapping切削cutting砂纸加工coated abrasive machining抛光加工polishing 抛亮光电火花加工electrical discharge machining 放电加工、EDM 线切割加工spark-erosion wire cutting WEDM电解研磨electrochemical lapping化学研磨chemical polishing中文名称英文名称中文别称15. 相关术语类(制图)技术制图technical drawing 工程制图技术参数technical parameter表面粗糙度surface finish 表面光洁度公差与配合common difference &cooperation形位公差geometric tolerance 几何公差尺寸公差dimension tolerance公差范围tolerance limits 容差极限基孔制basic hole system基轴制basic shaft system三角函数trigonometric function装配图assembly drawing 组装图、总装图、组合图模具排位图die layout 结构草图零件图part drawing 散件图工艺图process drawing 工艺过程图件号no.名称designation实际尺寸actual size标准尺寸stock size材质material 材料、物料数量quantity订货号order no. 订单号备注remarks 附注供应商supplier 供货商模号mold no设计design审核checked by 核对批准approve 审批比例scale单位unit张次sheet版本revision 版次图纸大小drawing sheet size模具公差mold tolerance日期date客户customer技术要求technical requirement 技术条件、技术规定使用说明书operation specifications 操作规范中文名称英文名称中文别称16. 相关术语类(流程、商务)流程优化process optimization 过程优化时间计划表time schedule 工作进度表、时间安排表设计优化design optimization产品分析报告product analysis report流动分析报告flow analysis report结构分析报告structural analysis report模具性能与寿命分析analysis of performance andlife of mold行政部administrative department 行政司营销部marketing department 市场部、市场销售部项目部project department工程部engineering department技术部technical department 技术研发部制造部manufacture department 生产部质检部quality inspection department 品保部采购部purchasing department财务科finance section客服部customer service department 客户服务部董事长board chairman 董事局主席总经理general manager技术总监technical director工程部经理engineering manager制造部经理manufacturing manager 生产部经理模具项目经理mold project manager模具设计师mould designer模具分析师mould analyst项目工程师project engineer钳工fitter模具成本mold cost 模具费用利润profit报价单quotation设计成本design cost 设计费制造成本manufacturing cost 生产成本材料成本material cost 物料成本调试成本debugging cost 调试费用管理成本administration cost 管理费税收revenue 交期delivery time 发货期、交货期。
Tooling Schedule 模具排期进度表 中英文版
schedule
actual
schedule
actual
schedule
actual
schedule
actual
le actual schedule actual schedule actual schedule actual schedule actual schedule actual schedule actual schedule actual
GRINGING (磨床）
CNC MILLING （CNC锣）
EDM （电火花）
WIRECUT （线切割）
POLISHING （抛光）
MOULDBASE(模胚) ROUGH MILLING AND(铣床开粗）
DRILL COOLING LINE(钻水路）
WIRECUT （线切割）
组装Assembly Moid Measure
schedule actual schedule actual schedule actual schedule actual schedule actual schedule actual schedule actual schedule actual
schedule actual schedule actual
CNC MILLING （CNC精锣）
EDM （电火花）
WIRECUT （线切割）
POLISHING （抛光）
Core Insert（后模） ROUGH MILLING AND(铣床开粗）
DRILL COOLING LINE(钻水路）
CNC ROUGH (CNC开粗)
HEAT TREATMENT (热处理）
schedule actual schedule actual
模具中英文参照表
模具中英文参照表模具常用术语中英文对照模芯Parting Core局部视图Partial View冷料# Cold Slag线切割Wire E.D.M轮廊Contour螺纹孔Tapping Hole连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts 指定吨位的注塑机Specific Press水嘴接头Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leaderd Pin镶件Mold Insert加硬Harden唧嘴Sprue设计筒图Design Preliminary名称块表Title Block版本标识Revision Level材料清单Stock List制模Build Mold手动滑块Hand Slide漏水测试Leak Test流道排气Runner Vents抛光Draw Polish侧抽芯Side Action加强筋Reinforcing三角撑Gusset柱子Bossed出模斜度Draft外廊Contour落单会议Kick-Off Meeting装卸孔Handling Hole运输安全带Moldstrap码模槽Clamp Slot撑头Support Pillar螺牙1/2-13 Eye Bolt 1/2-13Tap导柱位Leader Pin Location 耐落胶Teflon Paste 偏移量Offset水塞Water Line Plug撬模脚Ppy Slot重新加工Reworked配件Components补偿Compensation平面度Parallel倒角Chamfer模胚Mold Base热嘴Hotnozzle火花机Edm熔接线Weldline压机Press晒纹Texturing梯形Trapezoid凸缘、法兰Flange方铁Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate后模镶针Core Pin拉圾钉Stop Pin有托顶针Shoulder Ejector Pin顶针板导套Guided Ejection Bushing针板导柱Guided Ejection Leader Pin 唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing 定位圈（法兰）Locating Ring 管钉（定位销）Dowel Pin管状管钉Tubular Dowel吊环Safety Hoist Ring日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件Runner Shut-Off Insert早回Early Ejector Return加速项Accelerated Ejector客户Client产品名Part Name产品编号Part No缩水Shrinkage版本Rev模胚Mold Base下模镶件Core Block上模镶件Cavity Block小镶件Sub-Insert下模小镶件Core Sub-Insert上模小镶件Cavity Sub-Insert行位Slide行位镶件Slide Insert压条Gib压紧块（铲机）Jaw硬片（摩擦片）Wear Plate水口铁Runner Bar上模水口铁Upper Runner Bar下模水口铁Lower Runner Bar弹簧Spring水口勾针Sprue Puller Pin顶针Ejector Pin撑头Support Pillar直身锁Side Lock斜度锁Interlock锁模板Safety Bar‘O’令（密封圈）O'Ring喉塞Plug隔水片Baffle波子螺丝（行位定位螺丝）Ball-Catch 斜顶Lifter控制开关Switch回针Return Pin斜导柱Angle Pin推板Stripper PlateA’板A'PlateB’板B'Plate方铁（垫铁）Spacer Block顶针板Ejector Plate顶针底板Ejector Retainer Plate垫板Retainer Plate垃圾钉Stop Pin有托顶针Shoulder Ejector Pin 顶针板导套Guided Ejection Bushing针板导柱Guided Ejection Leader Pin 唧嘴Sprue Bushing三板模延伸式唧嘴Extension Nozzle Bushing 水口板导套Runner Stripper Plate Bushing 定位圈（法兰）Locating Ring 管钉（定位销）Dowel Pin管状管钉Tubular Dowel吊环Safety Hoist Ring日期印Dating Insert环保印Recycling Insert气顶Air Poppet Valve截水口镶件Runner Shut-Off Insert早回Early Ejector Return加速顶Accelerated Ejector扁顶Blade出模斜波Draft手动滑块模具Hand Slide-In Type Mold 回针板Backup合模Shutoff空隙槽Clearance Slot导柱及导套Leader Pin Bushing水口拉钩Spuer Puller模框镶件Pocket Insert成型热固性塑胶模具Thermoset Mold三板模3-Plat Mold分型面Parting Line司筒Ejector Sleeve垫圈Washer熔接线（夹水纹） Weldline吸针Sucker Pin回针板Retainer Plate顶出板Knock -Out Plate电动安全开关Electrical-Safety Switch 脱开Cut Of Position预先决定Preload缓冲器Bumper衬垫Cushion公差Tolerance突然性动作Slam销针Dowel钩槽Gib精磨Finished通框Through Window粘后模Sticking Core粘水口Sticking Sprue夹水纹Weld Line变形warping走水不平均Filling Uneven走不齐Short Shot挂成品Part Hanging漏水Water Leakage刮花（擦伤）Galling漏电Ele Leakage困气Air Trapping温度Temperature注塑模Injection Mold入水Gate试板Sampling压力Pressure倒圆Fillet顶棍Ejector顶白Stress Mark粘前模Sticking Cav名称块表Title Block版本标识Revision Level材料清单Stock List斜导柱（斜边）Angle PinA板 A'plateB板 B'plate倒扣Under-Cut披峰Flash缩水Sink Mark氮化Nitride不规则四边形Trapezoid缩水Shrinkage连续的Consecutive雕刻Engrave出模角Draft分模面Parting Surface擦位Shut-Off(S/0)导套Bushing回针Return Pin加硬Harden唧嘴Sprue设计筒图Design Preliminary 丝印Silkprint不干胶Adhesive Sticker导向针Guide Din公差Tolerance线切割Wire-Cut电火花Edm抛光Polishing蚀纹Texture探热针Thermocouple三打螺丝毫（限螺丝）Stripper Bolt 盖板Cover Plate 齿轮Gear油唧Hydraulic Cylinder司筒Ejector Sleeve导柱Leader Pin冷料# Cold Slag 线切割Wire E.D.M.轮廓Contour螺纹孔Tapping Hole连接件Fittings斜针Angle Pin接合Engage替换镶件Interchangeable Mold Inserts指定吨位的注塑机Specific Press水嘴接头Water Fittings螺纹Eyebolt Thread回针Stop Pin二级顶出针Sub-Leader Pin镶件Mold Insert锁定位Lock楔子(铲鸡) Wedge高产量模量High Volume Running Mold剖面图Cross Section模具结构Mold Construction模芯Parting Core局部视图Partial View热流道Manifold热嘴Hot Nozzle型腔数Cav No模号Mold No胶料Material尺寸Dimension重要尺寸Critical Dimension 模具完成日 completion date 雕刻Engrave托司 EJ.GUIDE PIN烧焊 Welding浇口 gate侧胶式 side gate潜伏式 sub gate热流道 hot runner阀浇式（大水口直接进胶）direct gate扇形式 fan gate手折式 break off gate点浇式 pin point gate单边打入子 runner insert gate搭接式浇口 tab gate隧道式澆口 tunnel gate牛角进胶 cashew gate/banana gate成型材料Injection material生产数（模具寿命）production volume二次加工second process投影面积projected area流动平衡 Equal flow coming out 锁模力 clamping force 成型机injection machine成型周期cycle time模具结构 mold construction模胚 Mold Base定位环 locating ring面板 top plate唧嘴 sprue流道 runner主流道 main runner分流道 side runnerA板 A plate导套 Bushing导柱 Leader Pin回针 Return Pin上模小镶件Cavity Sub-Insert 上模镶件Cavity Block行位Slide行位镶件Slide Insert压紧块（铲机）Jaw压条Gib后模 core小镶件Sub-Insert下模镶件Core Block下模小镶件Core Sub-Insert 料花 splay mark粘后模Sticking Core粘水口Sticking Sprue夹水纹Weld Line变形Warping走水不平均Filling Uneven 走不齐Short Shot毛边 flash困气air trapping结合线 welding line熔接痕welding mark缩水 sink mark顶白 stress mark漏水Water Leakage刮花（擦伤）Galling火山口 crater液压油缸 hydraulic cylinder。
Moldflow中英文对照表
Moldflow中英文对照表Packing保压Cooling Time冷却时间Packing profile保压曲线Injection Molding 注塑成型Short Shots短射Burn mark焦痕Over-pack过保压Project工程项目Study案例Import导入Aspect patio纵横比Overlapping Elements重叠单元Connectivity连通性Free edge自由边Non-manifold edge无交叠边Thickness厚度Occurrence number出现次数Flow流动Cool冷却Gate location浇口位置Mold temperature模具温度New project创建新项目Export导出Organize project项目组织Compact project压缩项目Preference参数选择Undo撤销操作Redo重复操作Active history活动历史Expanding selection扩展选择Banding selection框选Inclosing items only选择被框选单元双面部分Facing items only选择被框选单元面对用户的部分Study notes案例记事本Copy image to clipboard复制图片到剪贴板Save image to file保存图片为一个文件Save Animation to file保存动画为一个文件Properties属性Assign property指定属性Remove unused properties删除无用属性Standard标准Viewer视图工具条Animation动画Selection选择工具条Analysis分析Viewpoint视点Precision view精密查看Modeling建模工具条Mesh manipulation网格操作工具条Macro宏命令Customize用户自定义Status bar状态栏Projects项目管理区Study tasks案例浏览区Layers层Command line命令行Model display显示模型Default display 默认显示Lock all views锁定所有视图Unlock all views解锁所有视图Create nodes创建节点Create curves创建曲线Create regions创建面Create inserts创建嵌件Local coordinate system用户坐标系Modeling plane建模平面Define LCS定义LCSActivate as LCS激活LCS Activate as modeling plane激活并作为建模平面Query entities查询实体Cavity duplication wizard模腔复制向导Runner system wizard浇注系统创建向导Cooling circuit wizard冷却管道创建向导Mold surface Wizard模具表面创建向导Check surface connectivity检查表面连通性Generate mesh生成网格Create triangles创建三角形单元Create beam创建一维单元Mesh tool网格工具Orient all统一网格趋向Show diagnostics显示诊断结果Aspect ratio纵横比诊断Overlapping elements重叠单元诊断Orientation网格趋向诊断Connectivity连通性诊断Free edges自由边诊断Thickness厚度诊断Occurrence number出现次数诊断Fusion mesh match fusion网格匹配诊断Mesh statistics网格信息统计Set molding process设置成型工艺方式Thermal plastics injection molding热塑性塑料注塑成型Gas-assisted injection molding气体辅助注塑成型Co-injection molding联合注塑成型Injection-compress molding注塑-压缩成型Reactive molding反应成型Microchip encapsulation芯片封装Underflow encapsulation芯片倒装Multiple-barrel reactive molding多料筒反应成型Set analysis sequence设定分析次序Molding windows工艺窗口Gate location浇口位置Select material选择材质Process setting wizard工艺条件设置向导Set injection locations设置注塑口位置Set coolant inlets设置冷却机入口Set critical dimension设置关键尺寸Set constraints设置约束Set loads设置负载Analyze now开始分析Job manager工作管理Create new plots创建新的结果图Plot properties结果图属性Query result查询结果Plot notes结果图文本Define anchor plane定义锚图Delete anchor plane删除锚图Save gobble plot properties保存全部结果图Save properties of current plot as default 保存当前结果图属性为默认值Save XY plot curve data保存XY结果曲线数据Generate report wizard报告创建向导Add cover paper添加封面Add image添加图片Add animation添加动画Add text添加文本View in Brower在浏览器中查看New personal database创建新的个人数据库Edit personal database编辑个人数据库Search database查找数据库Edit default properties database编辑数据库默认属性Import legacy moldflow database导入老版本Moldflow数据库Import legacy C-mold database导入老版本C-mold数据库Start macro recording开始记录宏命令Stop macro recording停止记录宏命令Play macro执行宏命令New window打开一个新窗口Cascade层叠显示Title按标题显示Arrange icons排列图标Split四分显示Search help搜索帮助Keyboard shortcut键盘快捷键Tutorials帮助指南About Moldflow Plastics Insight关于MPI Moldflow Homepage Moldflow网站Moldflow Community Center Moldflow交流中心Internet Auto Reversion Update版本自动升级Fill time填充时间Pressure at fill/pack switchover填充/保压转换点压力Temperature at flow front流动前沿温度Bulk temperature厚度方向上的加权温度Shear rate,bulkBulk剪切速率Pressure at injection location注塑点压力Volume shrinkage at ejection顶出时体积收缩率Time to freeze冷凝时间Frozen layer fraction冷凝层因子Orientation at core型芯分子趋向Orientation at skin表层分子趋向Recommended ram speed推荐螺杆速率Clamp force锁模力%short weight注塑重量百分比Pressure压力Average velocity平均速率Shear rate剪切速率Grow from成型材料来源浇口(多浇口)Clamp force centric锁模力质心Weld lines 熔接线Air traps气穴Throughout浇注系统流量In-cavity residual stress in first principal direction模腔内第一方向(分子趋向方向)的残余应力In-cavity residual stress in second principal direction模腔内第二方向(分子趋向方向)的残余应力Circuit coolant temperature冷却剂温度Circuit flow rate冷却剂流速Circuit Reynolds number冷却剂雷诺兹指数Circuit metal temperature冷却管道温度Temperature(TOP),part制件上表面温度Temperature at surface,cold runner冷却管道表面温度Time to freeze, part制件冷凝时间Time to freeze,cold runner冷却管道冷凝时间Temperature (bottom),part制件下表面温度Temperature different,part制件温度差Maximum temperature,part制件最大温度Maximum temperature,cold runner冷却管道最大温度Average temperature,part制件平均温度Average temperature,cold runner冷却管道平均温度Maximum temperature position,part制件最大温度位置Maximum temperature position,cold runner冷却管道最大温度位置Temperature profile,part制件温度曲线Temperature profile,cold runner冷却管道温度曲线Deflection,all effects:deflection综合因素引起的总体偏差Deflection,all effects components综合因素引起的X方向上的偏差Deflection,all effects components综合因素引起的Y方向上的偏差Deflection,all effects components综合因素引起的Z方向上的偏差Deflection, differential cooling由冷却不均匀引起的偏差Deflection,differential shrinkage由收缩不均匀引起的偏差Deflection,orientation effects由分子趋向引起的偏差Mode shape弯曲模式形状Mode shape,differential cooling由冷却不均匀引起的弯曲模式形状Mode shape,differential shrinkage由收缩不均匀引起的弯曲模式形状Mode shape, orientation effects由分子趋向引起的弯曲模式形状Average linear shrinkage平均线性收缩Shrinkage check error收缩值检查Predicted error预测误差Total error总误差Parallel shrinkage平行方向上的收缩Perpendicular shrinkage垂直方向上收缩X components of shrinkageX方向上的收缩Y components of shrinkageY方向上的收缩Z components of shrinkageZ方向上的收缩Optimization最优化Best gate location最佳浇口位置Quality质量Zone成型工艺条件范围Injection pressure注塑压力Clamp tonnage锁模力吨位Cycle time成型周期时间Fill time填充时间Part weight制件压力Pressure(end of filling)填充结束时压力Flow front area vs.time流动前沿区域与时间关系图Ram position vs.time螺杆位置与时间关系图Percentage of part frozen vs.time制件冷凝百分比与时间关系图Injection Molding注塑成型Pressure压力Velocity Control速度控制Pressure Control压力控制Specific Material指定材料Manufacturer生产商Trade name商品名称Details细节Commonly used material常用材料Search criteria查找准则Search fields查找范围Commercial name商业名称Description描述Recommended processing推荐成型工艺条件Archeological properties流变特性Thermal properties热特性PVT properties压力体积温度特性Mechanical properties 机械特性Shrinkage properties收缩特性Filler properties填充物特性Family name 化合类型Manufacturer生产厂家Material structure材料结构Amorphous非结晶化合物Data source数据来源Last modified time最后一次修改时间Data status数据状态Material ID材料编号Grade code等级代码Supplier code供应商代码Mold Temperature推荐模具温度Melt T emperature推荐熔体温度Mold Temperature range模具温度范围Melt Temperature range熔体温度范围Absolute maximum melt Temperature熔体温度绝对最大值Ejection T emperature顶出温度Maximum shear stress最大剪切应力Maximum shear rate最大剪切速率Default viscosity model粘度模型Specific heat data比热数据Volume比容Melt density熔体密度Solid density固体密度Specific heat比热Weight%重量百分比Density密度Mechanical properties data机械属性数据Coefficient of thermal expansion data热扩散系数数据Tensile strength data抗张强度数据Surface Appearance外观Glossiness/gloss finish光洁度Matt finish/matt surface毛面Glass fiber rich surface/glass emergence on the surface玻纤外露Blooming/surface blooming表面析出White patches on surface表面白斑Silver marks/silver streak银纹Splay mark水纹Flow mark流纹Brittle/brittleness脆性Bubbles/trapped gas气泡Void孔Burn marks烧伤FR failed阻燃不合格Flame rating V-2阻燃V-2Poor dispersion分散不好FR/PTFE…agglomerates etc阻燃剂/PTFE…结块Pellet porous粒子不密,成团多孔的Low impact/tensile etc物理性能低High flow/fillercontent etc流动性/填充…过高Longs/fines/doubles长粒/碎屑/连粒Poor cut粒形不好Bristle/voids表面有小气泡/孔Glass bundles玻纤结团Product was rejected due to产品不能接受因为…High moisture level高水分Warpage/warped翘曲Shrinkage/shrink收缩Sink marks缩影Short shot/short molding打不满Distortion变形Over dimension尺寸过大Under dimension尺寸过小Flashing 飞边Discoloration变色Off color颜色差异Flow rate流动率Viscous粘High flow高流动Low flow低流动Sticky粘Mold release脱模Antioxidant抗氧剂Flame retardant agent阻燃剂Heat stabilizer热稳定剂Chopped glass fiber 短切玻纤Roving glass fiber粗纱/长玻纤Glass beads玻璃微珠Milled fiber碾磨纤维Molybdenum disulfide/moly/MoS2二硫化钼Colorant着色剂Pigment颜料Dye染料Accepted product specification接受产品规格Approved our product 认可我们的产品Re-set spec重新定标准Add in extra…添加多一点…Reduced …content减少…含量Dropped/reduced…by x％减少…含量…％Confirmed color standard确认颜色标准Approved color standard认可颜色标准Re-confirmed color standard重新确认颜色标准Qualified our product认可我们的产品Undergoing heat aging test在做热老化实验Product is under testing产品在测试当中Received first order接了第一个定单Expected to finish by…预计在…完成Expected order is xMT预计定单量…吨Estimated annual/monthly consumption预计年/月用量。
模具中英对照表12-23
137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182
44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90
CAM PLATE CAM POSITIVE RETURN FOLLOW CAM POSITIVE RETURN FOLLOWER CAM POSITIVE RETURN PIECE CAM POSITIVE RETURN PLATE CAM POSITIVE RETURN KEY CAM POSTME RETURN PLATE CAM RETUNN UNIT CAM RETURN BLOCK CAM RETURN FLLOWER CAM RETURN PLATE CAM RETURN SPRING CAM RETURN SPRING SET CAM RETURN SPRING UNIT CAM RETURN UNIT CAM RETURN SPRING UNITE CAM SIDE PLATE CAM SLIDE CAM SLIDE GUIDE CAM STOP URETHANE CAM STOPPER CAM STOPPER BLOCK CAM STROKE PLATE CAM UNIT CAM UNIT FLYING CAM UPPER PLATE CAM-1 CAST IN LIFT'G BUSH CAST IN NUT CENTER KEY CO-HOLE (BUTTON DIE) CO-HOLE (PUNCH) CO-HOLE PUNCH COIL SPRING CONNECTOR CONNECTOR "I"TYPE CONNECTOR "L"TYPE CONNECTOR(I) CONNECTOR(L) CORDINATION DIE BUTTON CORDINATION HOLE PUNCH COUPLING PLUG COUPLING SOCKET COUPLINGPLUG COUPLINGSOCKET COVER PLATE CYLINDER
模具进度表中英文版
Tool Design-Finn! （模具设计最终完成）
MOLD BASE (模胚）
Mold Base Delivery Date: Incl.Sprue Bushing and Locating Ring （模胚提交日期Ind唧咀直入和定位） Ejector Box: KO, Support Pillars and Guide System（顶出系统撑头KO和导向系统） Waterlines（吃水线） A Plate（A板） B Plate（B板） Rough Fitting（大致的装配） Final Fitting（最后的装配）
CAVITY"A"PLATE （型腔“A”板）
Rough CNC（CNC粗加工） Finish CNC（CNC精加工） EDM（EDM） Polishing（抛光）
CORE"B"PLATE（型芯“B”板）
Rough CNC（CNC粗加工） Finish CNC（CNC精加工） EDM（EDM） Polishing（抛光）
模具中英对照
A plate---A板 Locating Ring---定位圈Adjust Plate---调节板 MB Stand---支撑板Angular Pin---斜导柱 Mbase---模架B Plane---B 板 Moving half---动模Ball Ejector Bush--- 滚珠导套 Nylon---尼龙Blade Ejector Pin(B Eje Pin)--- 扁顶针 O Ring---O型圈Bottom Clamping Plate(BCP)---下模板 Oil Nipple---油管接头Cavity Main Insert(Cav Main Ins)---上模型腔 Parting Lock---锁紧扣Cavity Pin(Cav Pin)--- 上模镶针Pipe Plug(1/4” 1/8” NPT)---水管堵头Cavity Sub Insert (Cav Sub Ins)--- 上模镶件 Puller Bolt---拉杆Center Pin (Cen Pin)---丝筒中心针 Puller Insert (Puller Ins)--- 流道换向针Core Main Insert (Core Main Ins)---下模型芯 Puller Pin---拉料针Core Pin---下模镶针 Puller Plate---定位拉板Core Sub Insert (Core Sub Ins)--- 下模镶件 Return Pin---回针Delay Ejector Pin---延迟顶针 Runner Stripper Plate---流道板Distance Bolt (Dis Boit)---拉杆限位钉 S.H.C.S---内六角螺丝Distance Spacer---顶距限位柱 Safety block(Saf Blk)---安全锁扣Dowel Pin--- 销钉 Shoulder Screw (SH Scw)---台阶螺丝Ejector Bar (Eje Bar)---顶块Shut Off Nipple (1/4” 1/8” NPT)---快速接头Ejector Leader Bushing(Eje Lea Bush)-针板导套 Sleeve Pin Block (Sle Pin Blk)--- 丝筒压紧块Ejector Leader Pin (Eje Lea Pin)--- 针板导柱 Slider Body (Sld Body)--- 滑块Ejector Pin (Eje Pin)--- 顶针 Slider Bottom Wear-plate(Sld Bot W.P)- 滑块底部耐磨板Ejector Plate (Eje Pla)--- 顶针底板 Slider Cam (Sld Cam)--- 斜压块Ejector Retain Plate(Eje Retain Pla)-顶针面板 Slider Center Guide (Sld Cen Gui)- 滑块中心导轨Ejector Rod (Eje Rod)--- 顶棍 Slider Insert (Sld Ins)--- 滑块型芯Ejector Sleeve (Eje Sle)--- 丝筒 Slider Pin (Sld Pin)--- 滑块镶针F.H.S---平头螺丝 Slider Stopper Plate (Sld Stop Pla)--滑块限位板Fix Block---固定块 Slider Top Wear Plate(Sld Top W.P)-滑块耐磨板Fixing Haf---定模 Spacer Block---方铁Gate Insert---点浇口镶针 Space Ring---弹簧垫圈Guide Rail---滑块压板 Spring---弹簧H.S.S---无头螺丝 Spring Washer---垫圈Hot Runner---热流道 Sprue Bushing(Sprue Bus)--- 浇口套Insulate Plate---隔热板 Stop Plate(St Pla)--- 限位挡板Leader Bushing (Lea Bus)---导套 Stopper Disk(ST Disk)--- 垃圾钉Leader Pin (Lea Pin)---导柱 Straight Lock (St Lock)--- 精定位Lifter Body (Lif Body)---斜顶 Stripper Insert(Str Ins)--- 推板镶件Lifter Eye BOLT (Lif Eye Bolt)---吊环 Stripper Plate(Str Pla)---推板Lifter Guide (Lif Guide)--- 斜顶导向块 Support Pillar (S.P)---支撑柱Lifter Slider (Lif Sld)--- 斜顶滑块 Top Clamping Plate (TCP)---上模板Lifter Wear Plate (Lif W P)--- 斜顶耐磨板 Wedge Block (Wedge Blk)---压紧块。
进度表中英文版
客户模具进度跟踪报表 Part Number:产品编号 Mold Completion Date: 模具完成日期 Material: 材料 Phone: 电话 Start Date % Complete 开始日期 完成量 Date Complete 完成日期
TOOL DESIGN PHASE （模具设计阶段）
CAVITY"A"PLATE （型腔“A”板）
Rough CNC（CNC粗加工） Finish CNC（CNC精加工） EDM（EDM） Polishing（抛光）
CORE"B"PLATE（型芯“B”板）
Rough CNC（CNC粗加工） Finish CNC（CNC精加工） EDM（EDM） Polishing（抛光）
Tool Design-Preliminary（模具设计前期） Order Mold Base-After Customer Approval Process(客户同意购订模胚） Order Core and Cavity Steel-After Customer Approval Process (客户同意购订型芯和型腔）
MOLD ASSEMBLY（模具装配）
Rough Fitting（粗飞模） Final Fitting（最终飞模）
MOLD SAMPLING（模具样办）
Plastic Resin Available（备用塑胶树脂） Sample Date（提交样板日期） Air Express Ship Date - From China # of pcs. （空运/船运日期-从中国#PCS
Tool Design-Finn! （模具设计最终完成）
Байду номын сангаас
常用模具零件中英文对照表
常用模具零件中英文对照表常用模具零件中英文对照表2005-12-19 14:51:17中国注塑网入水：gate进入位：gate location水口形式：gate type大水口：edge gate细水口：pin-point gate水口大小：gate size转水口：switching runner/gate唧嘴口径：sprue diameter二、流道: runner热流道：hot runner,hot manifold热嘴冷流道: hot sprue/cold runner唧嘴直流: direct sprue gate圆形流道：round(full/half runner流道电脑分析：mold flow analysis : [??n?l?s?s] 流道平衡:runner balance热嘴：hot sprue热流道板：hot manifold发热管：cartridge heater探针: thermocouples插头：connector plug插座：connector socket密封/封料：seal三、运水：water line喉塞：line lpug喉管：tube塑胶管：plastic tube快速接头：jiffy quick connector plug/socker四、模具零件：mold components三板模：3-plate mold二板模：2-plate mold边钉/导边：leader pin/guide pin边司/导套：bushing/guide bushing中托司：shoulder guide bushing中托边：guide pin顶针板：ejector retainer plate托板：support plate螺丝：screw管钉：dowel pin ['da??l]开模槽：ply bar scot内模管位：core/cavity inter-lock顶针：ejector pin司筒：ejector sleeve司筒针：ejector pin推板：stripper plate [?str?p?r] 脱漆剂；脱衣舞演员；剥离剂；剥离器缩呵：movable core,return core core puller扣机（尼龙拉勾）：nylon latch lock ['na?.lɑn]:斜顶：lifter模胚（架）：mold base上内模：cavity insert下内模：core insert行位（滑块）：slide镶件：insert压座/斜鸡：wedge耐磨板/油板：wedge wear plate压条：plate撑头: support pillar唧嘴：sprue bushing挡板：stop plate定位圈：locating ring锁扣：latch扣鸡：parting lock set推杆：push bar栓打螺丝：S.H.S.B顶板：eracuretun活动臂：lever arm分流锥：spure sperader水口司:bush垃圾钉：stop pin隔片：buffle弹弓柱：spring rod弹弓:die spring中托司：ejector guide bush中托边：ejector guide pin镶针：pin销子：dowel pin波子弹弓：ball catch喉塞:pipeplug锁模块：lockplate斜顶：anglefrompin斜顶杆：angleejectorrod尼龙拉勾：partinglocks活动臂：leverarm复位键、提前回杆：earlyreturnbar 气阀：valves斜导边：anglepin术语：terms承压平面平衡：partingsurfacesupportbalance模排气：partinglineventing回针碰料位：returnpinandcavityinterference模总高超出啤机规格：moldbaseshuthight顶针碰运水：waterlineinterfereswithejectorpin料位出上/下模：partfromcavith(core)side模胚原身出料位：cavitydirectcutonA-plate,coredirectcutonB-plate.不准用镶件：Donotuse(core/cavity)insert用铍铜做镶件：useberylliumcopperinsert初步（正式）模图设计：preliinary(final)molddesign反呵：reversecore弹弓压缩量：springcompressedlength稳定性好：goodstability,stable强度不够：insufficientrigidity均匀冷却：evencooling扣模：sticking热膨胀：theroexpansion公差：tolorance铜公(电极）：copperelectrode塑件模具相关英文词汇出处：FanE『翻译中国』作者：(转载) FanE『翻译中国』2005-12-16 20:41:59compre sion molding压缩成型flash mold溢流式模具plsitive mold挤压式模具split mold分割式模具cavity型控母模core模心公模taper锥拔leather cloak仿皮革shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw自攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold手持式模具encapsulation molding低压封装成型、射出成型用模具two plate两极式（模具）well type蓄料井insulated runner绝缘浇道方式hot runner热浇道runner plat浇道模块valve gate阀门浇口band heater环带状的电热器spindle阀针spear head刨尖头slag well冷料井cold slag冷料渣air vent排气道welding line熔合痕eject pin顶出针零件英语punch冲头insert入块(嵌入件)deburring punch压毛边冲子groove punch压线冲子stamped punch字模冲子round punch圆冲子special shape punch异形冲子bending block折刀roller滚轴baffle plate挡块located block定位块supporting block for location 定位支承块air cushion plate气垫板air-cushion eject-rod气垫顶杆trimming punch 切边冲子stiffening rib punch = stinger 加强筋冲子ribbon punch 压筋冲子reel-stretch punch 卷圆压平冲子guide plate 定位板sliding block 滑块sliding dowel block 滑块固定块active plate 活动板lower sliding plate 下滑块板upper holder block 上压块upper mid plate 上中间板spring box 弹簧箱spring-box eject-rod 弹簧箱顶杆spring-box eject-plate 弹簧箱顶板bushing bolck 衬套cover plate 盖板guide pad 导料块14. electrical discharge machining (EDM) 电火花加工15. electrical insulating property 电绝缘性能16. electrochemical die-sinking machine 电解型腔加工机，电解型腔加工机床17. electrochemical machine (ECM) 电解加工机床，电化学加工机床18. electrochemical machining (ECM) 电解加工，电化学加工19. electro-discharge cutting 电火花加工，电火花切割20. electro-discharge cutting machine 电火花切割机21. electro-discharge machine tool 电火花加工机床22. Electro-discharge Machine 电火花加工机床23. electro-discharge machining 电火花加工24. electro-discharge machining process 电火花加工工艺，电火花加工工序25. epoxy resin 环氧树脂9. guide bushing 导套10. guide pillar 导柱，导杆，导柱11. guide pin 导向销，导杆12. guide pin cover 导柱盖13. guide plate 导料板，导板14. guide plate blanking die 导板式冲裁模，导板式落料模15. guide post 导柱，导柱16. guide stock plate 挡料板4. injection mold 注射模，注塑模5. injection molding 注射成型，注塑成型6. injection-molding machine 注塑机，注射机，注塑成形机7. injection plunger 注射柱塞8. in-line reciprocating screw 联机往复螺杆，串联往复螺杆，直线排列往复螺杆9. inner ram 内滑块10. inserting molding 嵌件成形11. integrated manufacturing 集成制造12. internal stress 内应力13. intermediate platen 中间板，隔板塑料成型模具的主要设计要素脱模距stripper distance脱模斜度draft投影面积projected area最大开距maximum daylight;open daylight闭合高度mould-shut height抽芯距core-pulling distance抽芯力core-pulling force脱模力ejector force开模力mould opening force模内压力internal mould pressure;cavity pressure成型压力moulding pressure背压环back-up ring1 bar = 14.5psi高压接头bite type fitting液压马达hydraulic motor冷却水流量计waterflow regulator打磨器材abrasive material打磨砂轮grinding wheels切割砂轮cutting wheels码模夹(注塑机使用) mould clamps; lifting clamps 小五金工具piping tools高压力软管high pressure hose风管,水软管air .water hose高压油表pressure gauge压力油喉hydraulic hoses光塑检测photoelastic testing吹塑模plastic blow mould注塑模plastic injection mould冲扎复合模blank & form compound die精密冲模precision blanking die熔料流动率MFR=melt flow rate熔料流动指数MET=melt flow index推板导柱guide pin for ejector plater座板clamping plate垫块space block(plate)推板ejector block(plate)afdek plate 档尘板guide stripe 行位后板cavity sub-insert 前模镶件core sub-insert 后模镶件sprue puller insert 扣针镶件stage ejector 顶棍spacer rock(risers) 间隔板变形distortion弯曲warp拖花drag marks火花纹EDM marks困气venting烧黑burns表面缩水shrinkage料位过薄/砸穿thin wall stock走水不平行uneven fill pattern夹水纹/流纹witness line;mismatch;stress marks 走水纹knit lines走水不齐short shotsorifice 料口nozzle seat 热嘴垫圈nozzle plate 射嘴板cross pin 十字头销sled 射台seal ring 封密圈spacer rail 介子座heater groove 发热管槽heater cement 发热管的结合剂soak 浸泡seat 垫圈ream 铰大圆孔直径grind 磨床drill 钻床mill 铣床caliper 卡尺G-caliper 分厘卡Depth Gauge 深厚计hardness tester 硬度计angle gauge 角规marble table 云台石projector 投影仪height gauge 高度仪microscope 显微镜plug gauge 塞规leveller 水平器R gauge R 规Inter caliper 内分厘卡surface 平面仪item number 细目编码catalog number 材料分类编码undercut lip 倒扣口hot tip = hot drop = nozzle 热嘴blow-off strip 放气板blow-off nozzle 吹风口spiral hose 螺旋式的连接喉rust solvent 除锈剂shaft 曲轴tensile strength 拉伸力yield strength 屈服力spark erosion 电火花蚀刻etch(photo-etch) 电蚀harden 淬硬copper electrode 铜公corrosion resistance 耐腐蚀anneal 退火heat treatment 淬火FEM(finite elemnet method) 有限元法preliminary tool design 初期模具设计图zone 热流道区域reverse taper 倒啤把clamp plate 码板toggle clamp 快速夹vacuum furnace 真空炉cavity insert rounds 圆柱镶件cavity insert b0locks 方柱镶件tensile strength 抗张强度,抗拉强度Concept drawing 概念图Assembly drawing 装配图mismatch;witness line 夹纹shut-off(n.) 枕位venting valves 疏气阀venting plug 疏气塞valve casing 阀门罩twist drill 旋钻harden/nitride 碎硬anneal 退火temper 回火stess crack 应力断裂corrosion resistance 防腐,防锈tensile strength 物】抗张强度,抗拉强度split mould (分离)组合式的模具inclined plate 斜面inclined bolt 斜栓jaw (工具,机械等)夹住东西的部分,钳口step change of the P/L 分形面枕位的改变thin steel section 较薄的料位clean-up 清理,清除,清扫Mold Dating Insert 模具日志镶件Hot Sprue Bushing 热浇口套semi-automatic 半自动quick disconnector 快速断开接头full shot 足量注射mismatch 夹痕;夹水纹ejector mark 顶痕screw boss 螺丝孔,螺丝基座sink mark 缩坑15% glass filled ABS 掺有15%玻璃的ABSspraying mold release 脱模剂drag mark 拖痕stress mark 应力痕reinforcement rib 加强筋slght stoning 轻度磨砂soliid line 实线dotted line 虚线internal diameter 内径external diameter 外径nickel-plated 电镀的handling hole;lifting hole 吊装孔parallel 平行块piston 活塞plunger 柱塞carrier 导轨rest 支架item number 项目编号catalog item 商品目录编码dimensional datum 尺寸基准heat treatment certification 淬硬证明文件back-up bushing 支撑导套jacking screw 起重螺丝,千斤顶tapped hole (带有螺旋角度的)螺丝孔diagonal corner 成对角的角落burn mark 烧痕hot runner mainfold (热流道板)分流板texuring 蚀纹clamping screw (注塑机)码模螺丝imperial 英制的metric 公制的puller bushing 水口套puller bar 水口铁drool bushing 防漏胶套筒safety switch 限位制water line connected internally or hard tubing 不可用胶喉连接运水lifter on square rod or locked from rotation 用方形柱或用管钉止转gate insert 入水镶件gate shut-offs 流道开关配件guided ejection 中托司parting line shutoff 前后模接触面waterlines clear tie bars. 运水喉咀接驳位要避开啤机呵林柱. BGV=Balanced Gate Value 平衡入水值spacer 垫块pocket 挖槽rough 粗加工finish 精加工plunge rate 进刀率retract rate 提刀速率splindle rate 主轴转速coolant 冷却液SPLIT RING 开口环(钥匙圈)侧向抽芯力side pulling-core force convert.transfer 转图guide pin 边针Tee slot cutter T形SLOT CUTTER zigzag 双向切削constant overlap spiral 等距环切parallel spiral 环绕切削parallel spiral clean corners 环切并清角morph spiral 依外形环绕true spiral 螺旋切削one way 单向end mill 平铣刀spher mill 球刀bull mill 圆鼻刀face mill 面铣刀rad mill 圆角成型刀chamfer mill 倒角刀slot mill 槽刀taper mill 推拔铣刀dove mill 鸠尾铣刀lot mill 棒状drill 钻孔reamer 纹刀bore bar 搪刀tap RH 右牙刀Tap LH 左牙刀ctr Drill 中心钻spot drill 点钻cntr bore 沉头孔刀c. sink 鱼眼孔钻loft surface 举升曲面coons surface 昆氏曲面ruled surface 直纹曲面revolved surface 旋转曲面swept surface 扫描曲面draft surface 牵引曲面grinding wheel 磨砂使用的轮子quench steel 将...淬火,使冷却stress relieving 应力消除molten 熔热的oxide film 氧化层guide pin and sleeve, locating ring ,导边,司筒,定位圈ejector ,ejector balde, ejector sleeve,顶针,扁顶针,顶针司筒, lifters, wear plate,horn pin,斜坊,磨损板,气顶针,O ring, water baffle, water pipe plug,O形圈,隔片,运水管道塞, water line connector,wear plate ,运水管道转接头,耐磨板air cylinder,hydraulic cylinder,氯压缸,液压缸micro switch,oil nipple, spring,开关装置,油枪接头,弹弓sprue bushing,early return system,浇口套,早期回撞装置, accelerated ejectors, slied holder,加速顶针,注塑周期计数器, cycle counter,date stamper，滑块固定板,生产日期铭牌,hot runner system ，热流道系统chemical composition 化学成份thermal conductiivity 导热性能thermal diffusivity 热扩散性能dimensonal stablity 尺寸稳定性能cooling effiency 冷却效率easiler ejection 易于脱模alloy insert 合金镶件(cooling) duct 输送管;导管maintenance cost 维护费用ultrasonic testing 超声波检测crack 断裂direct gate 直接浇口ring gate 环形浇口disk gate;disphragm gate 盘形浇口spoke gate;spider gate 轮辐浇口pin-point gate 点浇口edge gate 侧浇口submarine gate;tunnel gate 潜伏浇口fan gate 扇形浇口tab gate 护耳浇口runner plate 流道板(或冷或热)secondary nozzle 二级喷嘴torpedo;torpedo body assembly 鱼雷形组合体catridge heater 管式加热器heat pipe 热管valve gate 阀式浇口force plunger;pot plunger 柱塞flash groove;spew groove 溢料槽impression;cavity block;cavity plate 凹模punch;force 凸模movable insert;loose detail 活动镶件cavity splits;core splits(凹模拼块) (型芯拼块) 拼块side core 侧型芯thread plug;threaded core 螺纹型芯thread ring;threaded cavity 螺纹型环cutting wheel 切割砂轮grinding wheel 打磨砂轮abrasive material 打磨器材mould clamps;lifting clamp 砂模夹(注塑机使用) air (water) hose 风管,水轮管pressure gauge 高压油表hydraulic hose 压力油喉plastic blow mould 吹塑模plastic injection mould 注塑模blandk&form compound die 冲扎复合模precisiion blanking die 精密冲模MFR=melt flow rate 熔料流动率MFT=melt flow index 熔料流动指数handling hole 拉铃孔stop plate 限位块linder bush 衬套spacer block(plate) 垫块,方铁back-up ring 背位环standoff 限位块American Safety Hoist Rings. 英制安全吊装环Mechanical Properties 机械性能Tensile Strength(MPa) 抗拉强度elongation 延伸率hardness(Brinell) 硬度shear stength(MPa) 剪切力impact strength 冲韧性Physical Properties 物理性能solidification shrinkage 凝固收缩率freezing range 凝固与熔范围thermal expansion 热膨胀系数specific heat 比热thermal conductivity 热导率electrical conductivity 电导率micro-structure 金相分析hot work tool steel 热作钢circular motion 环形运动variable 变数,参数graphics window 图形窗口45 degree entry and a zero degree exit. 进刀口45度,退刀口0度runner stripper plate 脱料板stripper plate 活动板spacer rock(risers) 间隔板stage ejector 顶棍sprue puller insert 扣针导套guide strip 行位后板afdek plate 挡尘板side gate 大水口pinpoint gate 细水口SHCS 杯头螺丝FHCS 平头螺丝set screw 无头螺丝ball catch 波子螺丝wedge 行位较杯gib 线条,(撑鸡的导轨)latch 拉杆clamp 码仔spring guide pin 弹弓导柱steel pad disc 橙仔方ejector cam insert 斜顶块(screw) nut 螺母taper 嗲把/ 斜度taper interlock 嗲把锁texture 花纹toggle-lok 回撞装置top clamping plate 顶码板unified national coarse (UNC) 美制螺丝(粗牙) unified national fine (UNF) 美制螺丝(幼牙) set screw 喷头螺丝side gate 大水口slide retainer 行位管位water junction 喉咀spacer block 登仔jiffy-matic socket 喉咀套jiffy-tite plug 喉咀公spring plunger 弹弓座sprue puller 勾针/勾粒spring washer 弹簧塑圈stepped ejector pin 有托顶针strippers plate 推板/细水口板submarine gate 潜水口support pin 拉杆support plate 暗板surface finish 光洁度alignment strip 斜锁angle pin 斜针fan gate 扇形入水fillet 圆口ball catch 弹弓波子blade ejector 扁顶bottom clamping plate 底码板free length 自然长度bridge piece 水口铁helix spindle 锅杆hose clip 水喉箍bubbler 隔气运水jiggle 斜顶jiggle witness line 斜顶片位置center distance (CRS) 山打距离(中心线距离) clamp 码仔contour 外形leader pin 导针location ring(flange) 法兰counterbore 拔头,介子托mock-up;prototype 手办die cast 合金压铸national pipe thread(NPT) 美制喉牙overflow 垃圾位ejection sleeve 司筒,顶套epoxy 胶样pin point gate 细水口pressure plug 喉塞pressure spring 压力弹簧parting line flash 披锋burned 烧黑underfilled 缺料insert mismatch 镶件夹口ejector pins not flush 顶针有高低ejector pins skid 顶针滑动insert flash 镶件披锋pressure transducer 压力探测头hydraulic schematic 油积筒油路接驳图jiffy connector recessed 安装喉嘴后不可突出模胚knock out pullback stud -flush with clamp plate 顶棍镶件与底板有否空间safety switches 限位开关stop block 限位块safety strap 安全带drool bushing 防漏胶套筒insert mismatch 镶件夹口EDM visible 明显火花纹lifter scrapes 斜顶拖花short shots 走水不齐wall stock 料位厚薄knit lines 走水纹stress marks 夹水纹uneven fill pattern 走水不平行drag marks 拖花sprue pretrusion 唧嘴突出高度sprue orifice and radil size 唧嘴R尺寸sprue bushing-keyed 唧嘴有管钉English Chineseprogram name 产口名称part name 零件名称tool name 模具名称tool source 模具来源tool steel 模具钢材resin 塑料program number 产品编号part number 零件编号tool number 模具编号customer 客户名称No of cavities 内模编号machine size 啤机吨数drum miller 鼓形铣床duplex horizontal miller 复式卧铣床face miller 端面铣床grinding miller 研磨机plain miller 平面铣床planer-type miller 刨式铣床rack miller 齿条铣床slab miller 大型平面铣床slot miller 键槽铣刀spline miller 花键铣刀thread miller 螺纹铣刀vertical miller 立式铣刀,立辊,立辊轧机endmill 立铣刀plastic mould steel 塑料模钢cold work steel 冷作钢hot work steel 热作钢high speed steel 高速钢electric magnetic clutch 电磁离合器pad printer 移印机screen printer 丝印机hot stamper 烫印机solid carbide slitting saw 钻石钢锯片convex cutter 凸锣刀片concave cutter 凹锣刀片side&face cutters,staggered teeth 正侧双用镶钻石钢锣刀end-mill 锣刀semi-rod 半圆刀split double end 双头刀single end 单头刀2-flute 两辨3-flute 三辨4-flute 四辨reamer 直拈centre drill 中心钻solid carbide drill 钻咀zinc ingot 锌锭aluminium ignot 铝锭tin ignot 锡锭heater cement 发热管的结合剂heater groove 发热管槽spacer rail 介子座cross pin 十字头销nozzle plate 射嘴板nozzle seat 热嘴addendum 齿冠dedendum 齿根air compressor 空气压缩机air exhauster 抽气机air intake 进气口air seal 空气隔离层。
模具中英文对照
1.目的：为统一本厂冲压模具专业术语的中英文对照作业而制订本文件。
2.范围：适用于本公司各部门之作业。
3.职责：各部人员根据本节内容来进行相关作业。
4.内容：4.1.1 模具相关术语对照表：spotting['spɑtɪŋ] 合模种类中文名称英文名称中文名称英文名称模具种类连续模Progressive die 冲孔模Pierce die 机械手Transfer die 剪边模Trimming die 手动机械手Hand transfer die 下料模Blanking die 单工程模Single die 成形模Forming die 铸造结构模Cast die 折弯模Bending die 简易模Prototype die 围边模Flange die 铆合模Riveting die 拉伸模Draw die 复合模Compound die 快换模Changeable die工序类料带strip 料带图strip layout 工序process 冲导正孔pilot pierce 冲孔pierce 侧冲cam pierce 切边notch 切侧刃notch french 折弯bend 墩薄coin成形form 侧成形cam form 整形restrike 围边flange打凸米boss / dimple 打凸包emboss打字印stamp 打沙拉孔hourglass 面押coin burr 抽孔extrude hole 拍平flat 卷圆curl种类中文名称英文名称中文名称英文名称工序类旋转rotate 铆接rivet产品切边线trim line 铆螺母stake nut 切断cutoff 接刀口mismatch 料带带料处carrier tab 毛刺方向burr direction压线groove 下料blanking模板类上托板top plate 下托板bottom plate 上垫脚upper parallel 下垫脚lower parallel 上模座upper die set 下模座lower die set 上垫板punch backup 下垫板lower backup 上夹板punch holder 下夹板die holder 上脱料板stripper 下模板die plate 冲头punch 凹模die零件类浮块lifter 浮料板lifter plate 成型公form punch 压料块pressure pad 切边冲头trim punch 刀口trim steel 沉头孔counter bore 冲孔入子button 顶针kick off / ejector 废料切断刀slug breaker 成型凹模forming die 整形公restrike punch 导尺rail 导尺顶杆lifter bolt 导料板rail plate 镶件/入子insert侧冲组件cam 滑块slide滑块上油槽oil groove 铲机driver码模槽mounting slot 储运块storage block 限位柱stop block 起吊孔handing hole 起吊环eyebolt 靠块heel脱料板拉杆spool 模座导正块thrust heel 中文名称英文名称中文名称英文名称种类零件类耐磨片wear plate 垫片shim 压块keeper 初始管位first start pin 键槽key slot 键key氮气弹簧nitrogen spring 螺旋弹簧coil spring 聚氨酯弹簧urethane 导柱guide post 导套guide bushing 插针pilot pin 插针套pilot bushing 侧刃french 传感器sensor 销dowel 螺丝screw 拔牙jackscrew垫圈washer 盲销blind dowel压毛边冲头deburring punch 挡块stopping plate压线冲头groove punch 定位块location block字模冲头stamp punch 圆冲头round punch压筋冲头ribbon punch 气垫板air cushion plate 异形冲头special shape punch 气垫顶杆air-cushion eject-rod 切边冲头trimming punch 上压块pressure block加强筋冲头stiffening rib punch 弹簧箱spring box 定位板guide plate 弹簧箱顶杆spring-box eject-rod 压边圈binder 弹簧箱顶板spring-box eject-plate公差类公差tolerance 公差范围tolerance range 上公差upper tolerance 下公差lower tolerance 公差+/- 0.05 plus minus 0.05 形位公差图GD&T 平面度flatness 直线度straightness 倾斜度angularity 垂直度perpendicularity 平行度parallelism 圆度roundness种类中文名称英文名称中文名称英文名称公差类圆柱度cylindricity 面轮廓度surface profile 线轮廓度line profile 位置度true position 同轴度concentricity 对称度symmetry 圆跳动runout 全跳动total runout 尺寸dimension 角度值angle degree 尺寸全检报告dimensional layout 三次元尺寸报告CMM report冲床相关机械冲床mechanical press 油压机hydraulic press 吨位tonnage 行程stroke / travel 冲床上台面ram 冲床下台面bolster冲床台面布置图press layout 冲床上的快速对正QDC 冲床气垫air cushion 码仔stirrup 闭合高度shut height T型槽T-slot送料机feeder 送料高度feeding height工卡尺caliper 千分尺micrometer 直尺ruler 高度尺height gage具丝攻screw tap 起子screwdriver 拨牙器jacker 扳手wrench风磨机hand grinder 油石oil stone加工类开料cutting material 钻drill (DR) 攻牙tap 铰ream铣mill 车lathe电脑锣NC mill 线切割wire cutting(W/C) 磨grind 刨planer电火花EDM 镭射laser cutting 倒角chamfer xx的精加工finish XX真空热处理vacuum heattreatment镀钛TD coating 退磁demagnetization 烧焊weld4.1.2 加工说明对照表：加工说明Machining Note注:有0.00的地方为数据填入处X:-￠0.00（氮气弹弓过孔，锣穿）单+0.00X:-￠0.00 (DR.THRU FOR GAS SPRING) S+0.00X:-￠0.00（氮气弹弓沉头，正面CNC单+0.00,锣深0.00.)X:-￠0.00 ( CNC C'BORE TOP SIDE FOR GAS SPRING, S+0.00, DP0.00) X:-￠0.00（氮气弹弓沉头，反面CNC单+0.00,锣深0.00.)X:-￠0.00 (CNC C'BORE OPP SIDE FOR GAS SPRING, S+0.00, DP0.00) X:-￠0.00（合销孔,铰)X:-￠0.00 (REAM FOR DOWEL)X:-￠0.00（合销孔,割)单+0.00X:-￠0.00 (W/C FOR DOWEL) S+0.00(正面沉头￠0.00*0.00深,内攻M0.00*1.5牙)(￠0.00*0.00 C'BORE DP0.00 TOP SIDE, TAP M0.00*1.5 THR)(反面沉头￠0.00*0.00深,内攻M0.00*1.5牙)(￠0.00*0.00 C'BORE DP.0.00 OPP. SIDE, TAP M0.00*1.5 THR)X:-￠0.00（合销孔,钻穿)X:-￠0.00 (DR.THRU FOR DOWEL)X:-￠0.00（一般孔,钻穿)X:-￠0.00 (DR.THRU HL)X:-￠0.00（穿丝孔,钻穿)X:-￠0.00 (DR.THRU FOR WEDM S.H.)X:-￠0.00（漏油孔,钻穿)X:-￠0.00 (DR.THRU FOR DRAIN HL)X:-（漏油槽,反面CNC单+0.00,锣深0.00)X:- (CNC POCKET OPP.SIDE FOR DRAIN, S+0.00, DP0.00)X:-￠0.00（基准孔,铰)X:-￠0.00 (REAM FOR DATUM HL)X:-￠0.00钻穿（螺丝过孔)内攻M0.00牙X:-￠0.00 (DR.THRU FOR CLEARANCE HL, TAP M0.00 THR)(正面沉头￠0.00*0.00深)(￠0.00*0.00 C'BORE DP0.00 TOP SIDE)(反面沉头￠0.00*0.00深)(￠0.00*0.00 C'BORE DP0.00 OPP. SIDE)(侧面沉头￠0.00*0.00深)(￠0.00*0.00 C'BORE DP0.00 EDGE SIDE)X:-M0.00钻穿,反面攻深0.00,有效牙0.00X:-M0.00 DR.THRU, TAP DP0.00 OPP.SIDE, THR DP0.00)X:-M0.00钻穿,正面攻深0.00，有效牙0.00X:-M0.00 DR.THRU, TAP DP0.00 TOP SIDE, THR DP0.00)X:-M0.00钻穿,正反面攻深0.00，有效牙0.00X:-M0.00 DR.THRU, TAP DP0.00 TOP&OPP. SIDE, THR DP0.00)X:-M0.00盲孔,反面攻深0.00,有效牙0.00X:-M0.00 BLIND HL, TAP DP0.00 OPP. SIDE, THR DP0.00)X:-M0.00盲孔,正面攻深0.00，有效牙0.00X:-M0.00 BLIND HL, TAP DP0.00 TOP SIDE, THR DP0.00)X:-M0.00盲孔,正反面攻深0.00，有效牙0.00X:-M0.00 BLIND HL, TAP DP0.00 TOP&OPP. SIDE, THR DP0.00)X:-M0.00盲孔,侧面分中攻深0.00,组模自配X:-M0.00 BLIND HL, TAP DP0.00 ON EDGE FROM CENTER , DIE MAKER FIT) (侧面沉头￠0.00*0.00深)(￠0.00*0.00 C'BORE DP0.00 EDGE SIDE)X:-M0.00盲孔,侧面分中钻深0.00X:-M0.00 BLIND HL, DR. DP0.00 ON EDGE FROM CENTERX:-M0.00钻穿（拨牙螺丝孔，攻穿）X:-M0.00 DR.THRU FOR JACK SCREW, TAP THRUX:-￠0.00（塞打过孔,钻穿)X:-￠0.00 DR.THRU FOR SPOOLX:-￠0.00（弹弓过孔,钻穿)X:-￠0.00 DR.THRU FOR SPRINGX:-￠0.00（弹弓孔,反面沉深0.00)有效深0.00X:-￠0.00 (C'BORE FOR SPRING DP.0.00 OPP.SIDE, USED DP.0.00)X:-￠0.00（弹弓孔,正面沉深0.00)有效深0.00X:-￠0.00 (C'BORE FOR SPRING DP.0.00 TOP.SIDE, WORK DP.0.00)X:-（避空孔,锣穿)单+0.00X:- (POCKET THRU)S+0.00X:-（避空孔,正面CNC单+0.00,锣深0.00)X:- (POCKET, CNC MILL S+0.00 DP0.00 TOP SIDE)X:-（避空孔,反面CNC单+0.00,锣深0.00)X:- (POCKET, CNC MILL S+0.00 DP0.00 TOP SIDE)X:-￠0.00（避空孔,反面CNC单+0.00,锣深0.00)X:-￠0.00 (POCKET, CNC MILL S+0.00, DP0.00 OPP.SIDE)X:-￠0.00（避空孔,正面CNC单+0.00,锣深0.00)X:-￠0.00 (POCKET, CNC MILL S+0.00, DP0.00 EDGE SIDE)X:-￠0.00（两用销过孔,割)单+0.00X:-￠0.00 (LIFTER PIN, W/C S+0.00)X:-（导尺避空,CNC单+0.00锣穿)X:- (POCKET FOR RAIL, CNC MILL THRU, S+0.00)X:-（导尺避空,正面CNC单+0.00，锣深0.00)X:- (POCKET FOR RAIL, CNC MILL DP.0.00 TOP SIDE, S+0.00) X:-（导尺避空,反面CNC单+0.00，锣深0.00)X:- (POCKET FOR RAIL, CNC MILL DP.0.00 OPP. SIDE, S+0.00) X:-（浮块避空,正面CNC单+0.00，锣深0.00)X:- (POCKET FOR LIFTER, CNC MILL DP.0.00 TOP SIDE, S+0.00) X:-（浮块孔,割）单+0.00(反面避空单+0.00，锣深0.00)X:-（LIFTER HL, W/C)S+0.00(POCKET DP0.00 S+0.00 OPP.SIDE)X:-（浮块孔,锣）单+0.00(反面避空单+0.00，锣深0.00)X:-（LIFTER HL, MILL)S+0.00(POCKET DP0.00 S+0.00 OPP.SIDE)X:-￠0.00（顶针孔,钻穿)（反面沉头￠0.00*0.00深，内攻M0.00*1.5牙)X:-￠0.00 (EJECT PIN, DR.THRU.)(￠0.00 C'BORE DP0.00 OPP. SIDE, TAP M0.00*1.5 THR)X:-￠0.00（顶针孔,钻穿)（正面沉头￠0.00*0.00深，内攻M0.00*1.5牙)X:-￠0.00 (EJECT PIN, DR.THRU.)(￠0.00 C'BORE DP0.00 TOP SIDE, TAP M0.00*1.5 THR)X:-￠0.00（导柱（导套）孔,CNC锣)单+0.00X:-￠0.00 CNC MILL FOR GUIDE PIN(BUSHING) S+0.00X:-￠0.00（导柱（导套）孔,割)单+0.00X:-￠0.00 W/C FOR GUIDE PIN(BUSHING) S+0.00X:-M0.00*1.5(止付螺丝，正面攻深0.00)X:-M0.00*1.5(SET SCREW, TAP DP0.00 TOP SIDE)X:-M0.00*1.5(止付螺丝，反面攻深0.00)X:-M0.00*1.5(SET SCREW, TAP DP0.00 OPP SIDE)X:-（入子孔,CNC单+0.00,锣穿)X:-（INSERT HL, CNC MILL THRU S+0.00)(阴影部分正面沉头单+0.00，锣深0.00)(SHADE AREA, MILL DP0.00 S+0.00 TOP SIDE)(阴影部分反面沉头单+0.00，锣深0.00)(SHADE AREA, MILL DP0.00 S+0.00 OPP SIDE)X:-（入子孔,割）单+0.00X:-（INSERT HL, W/C S+0.00)(阴影部分扣位正面锣深0.00)(SHADE AREA FOR HEAD POCKET, MILL DP0.00 TOP SIDE)(阴影部分扣位反面锣深0.00)(SHADE AREA FOR HEAD POCKET, MILL DP0.00 OPP. SIDE)(正面沉头单+0.00，锣深0.00)(POCKET, MILL DP0.00 TOP SIDE)注: 此处的沉头不能用C'BORE, 只有圆形的沉头才用C'BORE.(反面沉头单+0.00，锣深0.00)(POCKET, MILL DP0.00 TOP SIDE)X:-（入子孔,CNC单+0.00,锣穿)X:- (INSERT HL, CNC MILL THRU. S+0.00)X:-（入子孔,正面CNC单+0.00,锣深0.00)X:- (INSERT HL, CNC MILL DP0.00 S+0.00 TOP SIDE)X:-（入子孔,反面CNC单+0.00,锣深0.00)X:- (INSERT HL, CNC MILL DP0.00 S+0.00 OPP. SIDE)X:-￠0.00（插针孔,铰)单+0.00X:-￠0.00（REAM S+0.00 FOR PILOT PIN)X:-￠0.00（插针孔,割)单+0.00(正面沉头￠0.00*0.00深)X:-￠0.00（W/C S+0.00 FOR PILOT PIN)(￠0.00 C'BORE DP0.00 TOP SIDE)X:-￠0.00（插针孔,钻穿)(正面沉头￠0.00*0.00深)X:-￠0.00（DR.THRU S+0.00 FOR PILOT PIN)(￠0.00 C'BORE DP0.00 TOP SIDE)X:-（冲头过孔,割)单+0.00(正面避空，CNC单+0.00，锣深0.00)(阴影部分扣位正面锣深0.00)X:-（W/C S+0.00 FOR PUNCH CLEARANCE HL)(POCKET, CNC DP 0.00 S+0.00 TOP SIDE)(POCKET SHADE FOR HEAD, DP0.00 TOP SIDE)X:-（冲头过孔,锣穿)单+0.00(正面避空，CNC单+0.00，锣深0.00)X:-（MILL THRU. S+0.00 FOR PUNCH CLEARANCE HL) (POCKET DP0.00 CNC S+ TOP SIDE)X:-（异形冲孔,直x斜x,割)单+0.00(双线部分，割)单+0.00X:-（W/C FOR SPECIAL HL, 0.00 LAND 0.00 TAPER, S+0.00) (W/C PER DOUBLE LINE S+0.00)X:-（冲孔,直x斜x,割)单+0.00X:-（W/C FOR PIERCE DIE HL, 0.00 LAND 0.00 TAPER S+0.00) X:-（冲孔,割)单+0.00X:-（W/C FOR PIERCE DIE HL S+0.00)X:-￠0.00（冲孔漏屎,钻穿)X:-￠0.00 (DR. THRU FOR CHUTE)X:-（异形冲孔漏屎,CNC单+0.00,锣穿）X:-￠0.00 (MILL. THRU FOR SPECIAL CHUTE S+0.00)X:-（产品落料斜度，实数斜30º锣）X:-（MILL 30 TAPER FOR PART RAMP NO CLEARANCE)X:-（漏屎斜度，直x斜45º锣）X:-（MILL FOR CHUTE 0.00 LAND 45 TAPER)。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
客户模具进度跟踪报表 Part Number:产品编号 Mold Completion Date: 模具完成日期 Material: 材料 Phone: 电话 Start Date % Complete 开始日期 完成量 Date Complete 完成日期
TOOL DESIGN PHASE （模具设计阶段）
MOLD ASSEMBLY（模具装配）
Rough Fitting（粗飞模） Final Fitting（最终飞模）
MOLD SAMPLING（模具样办）
Plastic Resin Available（备用塑胶树脂） Sample Date（提交样板日期） Air Express Ship Date - From China # of pcs. （空运/船运日期-从中国#PCS
FUDAKIN INDUSTRIAL CO.,LTD.-WEEKLY MOLD STATUS REPORT
Part Name:品名 Mold Start Date: 开模日期 Mold Number: 模具编号 Key Contact: 联系方式 Milestone 进度记录 PRELIMINARY PHASE（预备阶段）
MOLD SHIPMENT（模具出货）
Shipping Crate-Fumigation and Kiln Dry Customs Documentation（客人资料） Mold Shipment Date（模具出货日期）
Tool Design-Finn! （模具设计最终完成）
MOLD BASE (模胚）
Mold Base Delivery Date: Incl.Sprue Bushing and Locating Ring （模胚提交日期Ind唧咀直入和定位） Ejector Box: KO, Support Pillars and Guide System（顶出系统撑头KO和导向系统） Waterlines（吃水线） A Plate（A板） B Plate（B板） Rough Fitting（大致的装配） Final Fitting（最后的装配）
CAVITY"A"PLATE （型腔“A”板）
Rough CNC（CNC粗加工） Finish CNC（CNC精加工） EDM（EDM） Polishing（抛光）
CORE"B"PLATE（型芯“B”板）
Rough CNC（CNC粗加工） Finish CNC（CNC精加） EDM（EDM） Polishing（抛光）
Tool Design-Preliminary（模具设计前期） Order Mold Base-After Customer Approval Process(客户同意购订模胚） Order Core and Cavity Steel-After Customer Approval Process (客户同意购订型芯和型腔）