紧固件中英文对照
紧固件-中英文对照
紧固件-中英文对照No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝(分使用于金属与使用于塑料二种)B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度(mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字( Minus )b. Phillips: 十字( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向(只可锁入,不可退出) A-4: Head Code/ 头部外型.a. Flat: 平头(锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut 六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt 车辆(汽车)螺丝、螺帽Automotive Fasteners 航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓Blind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws 链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy 重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws 套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed CapNuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts 不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线 E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod 线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire 不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives 成型冲模Header Punches In Various Drives 螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass) 螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉SpheroidizingBright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator 滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind Nuts拉钉Blind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动拉钉钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet MetalFasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains 机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-LowThread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
紧固件中英文术语对照
PLN SPEC
BRINELL
布氏硬度
ITEM
物品，项目
C.A.T
catalog 目录
dacromet
达克罗
projet
项目
SILVER plated 镀银
磷化处理
occur
发生，出现
side
侧面，旁边
show（shown） 显示，表示，表现，指
due
应到的，预期的，相当
EPAISSEUR
SIMLIAR exwarehouse（ex-works）出厂的 ex-wharf 码头交 货价格expire
有界
O.P.T
选择
PO
订单
MSA
测量系统分析
EA
重复性
C/A
SQL
DEPT
部门，科，系，局， 处，车间，工段（代
eyeblling
目测
adhesive strength
附着强度
adhesive force 附着力
Deactivation 钝化
MES
生产执行系统
tensile testwedge angles
A request for quotation
telphone
EST ANNUAL USAGE
DELTA MKS
一种涂层
CCP
特性控制计划
KFF
误差
ROH(德)coarse 粗糙
HHP
PO
订单号
CPK
过程能力指数
EP
PACT
合同
equivalent 等于
equal
等于
even
相等
plus
加上
percent
常用紧固件相关英语(中英对照).
螺纹大径:Major Diam中径:Pitch diam底径:Minor diam通止规:Go/No go gage机械性能:mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢,防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料:Raw material球化退火:Annealing冷拔:Drawing冷镦:Forming机加工:Machining螺纹成型:Roll Threading热处理:heat-treatment表面处理:finish去氢:Lustrating hydrogen检验:Inspection包装:Packing入库:Stocking车床:lathe磨制:grinding红打:hot forging冲压:punching1 标准GB (国标DIN (德制JIS (日标ANSI (美标BA (英制2 螺纹M. MF (公制牙UNC.UNF (美制牙BSW.BSF (英制牙3 海关编码73181500 螺栓73181600 螺帽73182100 垫圈6-bobes recess 内梅花BO=black oxide 氧化发黑IHH=ind hex head 锯六角头PH=phillips 十字槽sw/fw=split washer/flatwasher 弹垫平垫kep nut 锁紧螺母cementation 渗碳acorn nut 盖形螺母螺丝头型Pan 圆头(盘头Oval 半沉头H.W.H.. 六角小法兰H.W.F. 六角大法兰CSK 沙拉头(沉头Large wafer 大扁平头Bugle 喇叭头Truss 盘头带垫Pozi 米制槽Phill 十字槽Serra-tion 垫下带花Flower Head 开花头欧洲标准EN国际标准化组织国际标准化组织标准ISO 国际电工委员会国际电工委员会标准IEC 国际国际电信联盟标准ITU欧共体欧洲电子元器件协会标准CECC德国德国标准DIN英国英国标准BS美国美国国家标准ANSI美国美国材料与试验协会标准ASTM美国美国机械工程师协会标准ASME美国美国电子工业协会标准EIA美国美国连接电子学工业协会标准IPC美国美国焊接协会标准AWS美国美国石油协会标准API美国美国国家公路与运输商协会标准AASHTO美国美国加热制冷与空调工程师协会标准ASHRAE 美国美国电气制造商协会标准NEMA美国美国给水工程协会标准AWWA美国美国仪器、系统与自动化协会标准ISA美国美国保险商实验室标准UL美国电气与电子工程师协会标准IEEE美国美国机动工程师协会标准SAE美国美国腐蚀工程师协会标准NACE美国美国纺织化学师与印染师协会标准AATCC美国美国钢结构油漆标准SSPC美国美国铝协会标准AA美国美国卫生工程协会标准ASSE美国美国煤气协会标准AGA美国美国阀门及配件工业协会标准MSS美国美国音频工程协会标准AES美国美国建筑小五金制造商协会标准BHMA 美国美国国家卫生基金会标准NSF美国美国标准NISO,PFI,RWMA美国美国信息与图像管理协会标准AIIM美国美国空调与制冷学会标准ARI美国美国军用标准MIL美国美国防火协会标准NFPA美国美国航空无线电设备标准ARINC美国美国齿轮协会标准AGMA加拿大加拿大标准协会标准CSA加拿大加拿大通用标准局标准CGSB澳大利亚澳大利亚国家标准AS德国德国工程师协会标准VDI欧共体欧洲电信标准ETSI法国法国标准NF日本日本工业标准JIS中国国家标准GB中国机械工业标准JB 中国电子工业标准SJ。
紧固件中英文对照大全
--------------------------------------------------------------------------------螺栓－－方头螺栓C级UDC 621.882.6 | GB 8-88 | 代替GB8-76Square head bolts-Product grade C－－沉头方颈螺栓UDC 621.882.6 | GB 10-88 | 代替GB10-76Flat countersunk square neck bolts－－沉头带榫螺拴UDC 621.882.6 | GB 11-88 | 代替GB11-76Flat countersunk nib bolts－－半圆头方颈螺栓UDC 621.882.6 | GB 12-88 | 代替GB12-76Cup head square neck bolts－－半圆头带榫螺栓UDC 621.882.6 | GB 13-88 | 代替GB13-76Cup head nid bolts－－大半圆头方颈螺栓C级ISO 8677:1986 | GB 14-1998 | 代替GB14-88Cup head square neck bolts with large head-Product grade C－－大半圆头带榫螺栓UDC 621.882.6 | GB 15-88 | 代替GB15-76Cup head nib bolts with large head－－六角头铰制孔用螺栓UDC 621.882.6 | GB 27-88 | 代替GB27-76Hexagon fit bolts-product grade A and B－－六角头螺杆带孔铰制孔用螺栓UDC 621.882.6 | GB 28-88 | 代替GB28-76Hexagon fit bolts with split pin hole on shank-product grade A and B－－六角头头部带槽螺栓A 和B 级UDC 621.882.6 | GB 29.1-88 | 代替GB29-76 Hexagon bolts with slot on head -product A and B－－十字槽凹穴六角头螺栓UDC 621.882.6 | GB 29.2-88 | 代替GB29-76Cross recessed hexagon bolts with indentation－－六角头螺杆带孔螺栓UDC 621.882.6 | GB 31.1-88 | 代替GB31、23、24-76 Hexagon bolts with split pin hole on shank-product grade A and B－－六角头螺杆带孔螺栓细杆B级UDC 621.882.6 | GB 31.2-88 | 代替GB31、23、24-76 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B－－六角头螺杆带孔螺栓细牙A和B级UDC 621.882.6 | GB 31.3-88 | 代替GB31、23、24-76Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B－－六角头头部带孔螺栓A 和B级UDC 621.882.6 | GB 32.1-88 | 代替GB32、25、26-76 Hexagon bolts with wire holes on head-product grade A and B－－六角头头部带孔螺栓细杆B级UDC 621.882.6 | GB 32.2-88 | 代替GB32、25、26-76 Hexagon bolts with wire holes on head-Reduced shank-product grade B－－六角头头部带孔螺栓细牙A 和 B 级UDC 621.882.6 | GB 32.3-88 | 代替GB32、25、26-76Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B－－下方头螺栓B级UDC 621.882.6 | GB 35-88 | 代替GB35-76Square head bolts with small head-praduct grade B－－T 形槽用螺栓UDC 621.882.6 | GB 37-88 | 代替GB37-76Bolts for T-Slot－－加强半圆头方颈螺栓GB /T794-93 | 代替GB794-67Strengthened cup head square neck bolts－－活节螺栓UDC 621.882.6 | GB 798-88 | 代替GB798-76Eye bolts－－地脚螺栓UDC 621.882.6 | GB 799-88 | 代替GB799-76Eyelet bolts－－沉头双榫螺UDC 621.882.6 | GB 800-88 | 代替GB800-77Flat countersunk double nib bolts－－小圆半头低方颈螺栓B级ISO 8678:1988 | GB /T 801-1998 | 代替GB801-88Cup head square neck bolts with small head and short neck-product grade B－－六角头螺栓C级ISO 4016:1999 | GB /T 5780-2000 | 代替GB/T 5780-1986 Hexagon head bolts-product grade C－－六角头螺栓全螺纹C级ISO 4018:1999 | GB /T 5781-2000 | 代替GB/T 5781-1986 Hexagon head bolts-Full thread-product grade C－－六角头螺栓ISO 4014：1999 | GB /T 5782-2000 | 代替GB/T 5782-1986Hexagon head bolts－－六角头螺栓全螺纹ISO 4017：1999 | GB /T 5783-2000 | 代替GB/T 5783-1986 Hexagon head bolts-Full thread－－六角头螺栓-细杆-B级UDC 621.882.6 | GB 5784-86 | 代替GB30、21-76Hexagon head bolts-Reduced shank -Product grade B－－六角头螺栓细牙ISO 8765：1999 | GB /T 5785-2000 | 代替GB/T 5785-1986 Hexagon head bolts with fine pitch thread－－六角头螺栓细牙全螺纹ISO 8676：1999 | GB /T 5786-2000 | 代替GB/T 5786-1986 Hexagon head bolts with fine pitch thread-Full thread－－六角法兰面螺栓-加大系列-B级UDC 621.882.6 | GB 5789-86 |Hexagon flange bolts-Heavy series-product grade B－－六角法兰面螺栓-加大系列-细杆-B级UDC 621.882.6 | GB 5790-86 |Hexagon flange bolts-Heavy series-product grade B－－六角法兰面螺栓小系列ISO 4162：1990 | GB /T 16674-1996 | 代替GB/T 5787、5788-1986Hexagon flange bolts-Small series－－钢网架螺栓球节点用高强度螺栓GB /T 16939-1997 |High strength bolts for joints of space grid structures螺柱－－双头螺柱bm=1d UDC 621.882 | GB 897-88 | 代替GB897-76Double end studs-bm=1d－－双头螺柱bm=1.25d UDC 621.882 | GB 898-88 | 代替GB898-76Double end studs-bm=1.25d－－双头螺柱bm=1.5d UDC 621.882 | GB 899-88 | 代替GB899-76Double end studs-bm=1.5d－－双头螺柱bm=2d UDC 621.882 | GB 900-88 | 代替GB900-76Double end studs--bm=2d－－等长双头螺柱B级UDC 621.882 | GB 901-88 | 代替GB901-76Double end studs(clamping type) -Product grade B－－手工焊用焊接螺柱GB 902.1-89 | 代替GB902-76Weld studs for manual welding－－机动弧焊用焊接螺柱GB 902.2-89 | 代替GB902-76Weld studs for arc welding－－储能焊用焊接螺柱GB 902.3-89 | 代替GB902-76Weld studs for capacitor discharge welding－－等长双头螺柱C级UDC 621.882 | GB 953-88 | 代替GB953-76 Double end studs(clamping type)-product grade C－－螺杆GB /T 15389-94 |Threaded rods螺母－－方螺母C级UDC 621.882.3 | GB 39-88 | 代替GB39-76 Square nuts-product grade C－－六角螺母C级ISO 4034：1999 | GB /T41-2000 | 代替GB/T 41-1986 Hexagon nuts-product grade C－－六角厚螺母ISO 621.882.3 | GB 56-88 | 代替GB56-76Hexagon thick nuts－－蝶形螺母UDC 621.882.3 | GB 62-88 | 代替GB62-76Wing nuts－－环形螺母UDC 621.882.3 | GB 63-88 | 代替GB63-76Lifting nuts－－组合式盖形螺母UDC 621.882.3 | GB 802-88 | 代替GB802-76 Acorn nuts－－球面六角螺母UDC 621.882.3 | GB 804-88 | 代替GB804-76 Hexagon nuts with raised face－－扣紧螺母UDC 621.882.3 | GB 805-88 | 代替GB805-76Tight nuts－－滚花高螺母UDC 621.882.3 | GB 806-88 | 代替GB806-76Knurled nut with collar－－滚花薄螺母UDC 621.882.3 | GB 807-88 | 代替GB807-76Knurled nuts－－小六角特扁细牙螺母UDC 621.882.3 | GB 808-88 | 代替GB808-76 Small hexagon thin nuts-Fine pitch thread－－嵌装圆螺母UDC 621.882.3 | GB 809-88 | 代替GB809-76Lnsert round nuts－－小圆螺母UDC 621.882.3 | GB 810-88 | 代替GB810-76Small round nuts－－圆螺母UDC 621.882.3 | GB 812-88 | 代替GB812-76Round nuts－－端面带孔圆螺母UDC 621.882.3 | GB 815-88 | 代替GB815-76 Round nuts with drilled holes in one face－－侧面带孔圆螺母UDC 621.882.3 | GB 816-88 | 代替GB816-79Round nuts with set pin holes in side－－带槽圆螺母UDC 621.882.3 | GB 817-88 | 代替GB817-76Slotted round nuts－－1型非金属嵌件六角锁紧螺母ISO 7040：1997 | GB /T 889.1-2000 | 代替GB/T 889-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 1－－1型非金属嵌件六角锁紧螺母细牙ISO 10512：1997 | GB /T 889.2-2000 |Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread－－盖形螺母UDC 621.882.3 | GB 923-88 | 代替GB923-76Acorn nuts－－1型六角螺母ISO 4032：1999 | GB /T 6170-2000 | 代替GB/T 6170-1986Hexagon nuts,style 1－－1型六角螺母细牙ISO 8673：1999 | GB /T 6171-2000 | 代替GB/T 6171-1986 Hexagon nuts,style 1,with fine pitch thread－－六角薄螺母ISO 4035：1999 | GB /T 6172.1-2000 | 代替GB/T 6172-1986Hexagon thin nuts(chamfered)－－非金属嵌件六角锁紧薄螺母ISO 10511：1997 | GB /T 6072.2-2000 |Prevailing torque type hexagon thin nuts(with non-metallic insert)－－六角薄螺母细牙ISO 8675：1999 | GB /T 6173-2000 | 代替GB/T 6173-1986 Hexagon thin nuts(chamfered) with fine pitch thread－－六角薄螺母无倒角ISO 4036：1999 | GB /T 6174-2000 | 代替GB/T 6174-1986 Hexagon thin nuts(unchamfered)－－2型六角螺母ISO 4033：1999 | GB /T 6175-2000 | 代替GB/T 6175-1986Hexagon nuts,style 2－－2型六角螺母细牙ISO 8674：1999 | GB /T 6176-2000 | 代替GB/T 6176-1986 Hexagon nuts,style 2,with fine pitch thread－－六角法兰面螺母ISO 4161：1999 | GB /T 6177.1-2000 | 代替GB/T 6177-1986 Hexagon nuts with flange－－六角法兰面螺母细牙ISO 10663：1999 | GB /T 6177.2-2000 |Hexagon nuts with flange-fine pitch thread－－1型六角开槽螺母-A和B级UDC 621.882.3 | GB 6178-86 | 代替GB57~58-76 Hexagon slotted and castle nuts,style 1 -product grades A and B－－1型六角开槽螺母-C级UDC 621.882.3 | GB 6179-86 | 代替GB57~58-76Hexagon slotted nuts,style 1 -product grade C－－2型六角开槽螺母-A和B级UDC 621.882.3 | GB 6180-86 |Hexagon slotted and castle nuts,style 2 -Product grades A and B－－六角开槽薄螺母-A和B级UDC 621.882.3 | GB 6181-86 | 代替GB59~60-76 Hexagon thin slotted nuts-Product grades A and B－－2型非金属嵌件六角锁紧螺母ISO 7041：1997 | GB /T 6182-2000 | 代替GB/T 6182-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 2－－非金属嵌件六角法兰面锁紧螺母ISO 7043：1997 | GB /T 6183.1-2000 | 代替GB/T 6183-1986Prevailing torque type hexagon nuts with flange(with non-metallic insert)－－非金属嵌件六角法兰面锁紧螺母细牙ISO 12125：1997 | GB /T 6183.2-2000 | Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread－－1型全金属六角锁紧螺母ISO 7719：1997 | GB /T 6184-2000 | 代替GB/T 6184-1986 Prevailing torque type all-metal hexagon nuts,style 1－－2型全金属六角锁紧螺母ISO 7042：1997 | GB /T 6185.1-2000 | 代替GB/T 6185-1986 Prevailing torque type all-metal hexagon nuts,style 2－－2型全金属六角锁紧螺母细牙ISO 10513：1997 | GB /T 6185.2-2000 |Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread－－2型全金属六角锁紧螺母9级ISO 7720：1997 | GB /T 6186-2000 | 代替GB/T 6186-1986Prevailing torque type all-metal hexagon nuts,style 2-Property class 9－－全金属六角法兰面锁紧螺母ISO 7044：1997 | GB /T 6187.1-2000 | 代替GB/T 6187-1986Prevailing torque type all-metal hexagon nuts with flange－－全金属六角法兰面锁紧螺母细牙ISO 12126：1997 | GB /T 6187.2-2000 |Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread－－1型六角开槽螺母细牙A和B级UDC 621.882.3 | GB 9457-88 | 代替GB57、58-76 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B－－2型六角开槽螺母细牙A和B级UDC 621.882.3 | GB 9458-88 |Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B－－六角开槽薄螺母细牙A和B级UDC 621.882.3 | GB 9459-88 | 代替GB59、60-76 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B－－焊接方螺母GB /T 13680-92 |Square weld nuts－－焊接六角螺母GB /T 13681-92 |Hexagon weld nuts－－平头铆螺母GB /T 17880.1-1999 |Flat head riveted nuts－－沉头铆螺母GB /T 17880.2-1999 |Countersunk head riveted nuts－－小沉头铆螺母GB /T 17880.3-1999 |Small countersunk head riveted nuts－－120°小沉头铆螺母GB /T 17880.4-1999 |120°Small countersunk head riveted nuts－－平头六角铆螺母GB /T 17880.5-1999 |Flat head hexagon riveted nuts－－精密机械用六角螺母ISO 4166：1979 | GB /T 18195-2000 |Hexagon nuts for fine mechanics螺钉－－开槽圆柱头螺钉ISO 1207：1992 | GB /T 65-2000 | 代替GB/T 65-1985 Slotted cheese head screws－－开槽盘头螺钉ISO 1580：1994 | GB /T 67-2000 | 代替GB/T 67-1985Slotted pan head screws－－开槽沉头螺钉ISO 2009：1994 | GB /T 68-2000 | 代替GB/T 68-1985Slotted countersunk flat head screws (common head style)－－开槽半沉头螺钉ISO 2010：1994 | GB /T 69-2000 | 代替GB/T 69-1985 Countersunk slotted raised head screws (common head style)－－内六角圆柱头螺钉ISO 4762：1997 | GB /T 70.1-2000 | 代替GB/T 70-1985 Hexagon socket head cap screws－－内六角平圆头螺钉ISO 7380：1997 | GB /T 70.2-2000 |Hexagon socket button head screws－－内六角沉头螺钉ISO 10642：1997 | GB /T 70.3-2000 |Hexagon socket countersunk head screws－－开槽锥端紧定螺钉UDC 621.882.219 | GB 71-85 | 代替GB71-76Slotted set screws with cone point－－开槽锥端定位螺钉UDC 621.882.2 | GB 72-88 | 代替GB72-76Slotted setscrews with cone point－－开槽平端紧定螺钉UDC 621.882.219.4 | GB 73-85 | 代替GB73-76Slotted set screws with flat point－－开槽凹端紧定螺钉UDC 621.882.219.4.092.6 | GB 74-85 | 代替GB74-76Slotted set screws with cup point－－开槽长圆柱端紧定螺钉UDC 621.882.219.4.092.5 | GB 75-85 | 代替GB75-76Slotted set screws with long dog point－－内六角平端紧定螺钉ISO 4026：1993 | GB /T 77-2000 | 代替GB/T 77-1985 Hexagon socket set screws with flat point－－内六角锥端紧定螺钉ISO 4027：1993 | GB /T 78-2000 | 代替GB/T 78-1985 Hexagon socket set screws with cone point－－内六角圆柱端紧定螺钉ISO 4028：1993 | GB /T 79-2000 | 代替GB/T 79-1985 Hexagon socket set screws with dog point－－内六角凹端紧定螺钉ISO 4029：1993 | GB /T 80-2000 | 代替GB/T 80-1985 Hexagon socket set screws with cup point－－方头长圆柱球面端紧定螺钉UDC 621.882.2 | GB 83-88 | 代替GB83-76Square set screws with long dog point and rounded end－－方头凹端紧定螺钉UDC 621.882.2 | GB 84-88 | 代替GB84-76Square set screws with cup point－－方头长圆柱端紧定螺钉UDC 621.882.2 | GB 85-88 | 代替GB85-76Square set screws with long dog point－－方头短圆柱锥端紧定螺钉UDC 621.882.2 | GB 86-88 | 代替GB86-76Square set screws with short dog point and cone end－－十字槽盘头螺钉ISO 7045：1994 | GB /T 818-2000 | 代替GB/T 818-1985Pan head screws with cross recess－－十字槽沉头螺钉第1部分：钢4.8级ISO 7046-1：1994 | GB /T 819.1-2000 | 代替GB/T 819-1985Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8－－十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3ISO 7046-2：1990 | GB /T 819.2-1997 |Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals－－十字槽半沉头螺钉ISO 7047：1994 | GB /T 820-2000 | 代替GB/T 820-1985 Countersunk raised head screws (common head style) with cross recess－－方头平端紧定螺钉UDC 621.882.2 | GB 821-88 | 代替GB821-76Square set screws with chamfered end－－十字槽圆柱头螺钉ISO 7048：1998 | GB /T 822-2000 | 代替GB/T 822-1988Cheese head screws with cross recess－－十字槽小盘头螺钉UDC 621.882.2 | GB 823-88 | 代替GB823-76Cross recessed small pan head screws－－吊环螺钉UDC 621.882 | GB 825-88 | 代替GB825-76Eyebolts－－开槽盘头定位螺钉UDC 621.882.2 | GB 828-88 | 代替GB828-76Slotted pan head set setscrews with dog point－－开槽圆柱端定位螺钉UDC 621.882.2 | GB 829-88 | 代替GB829-76Slotted setscrews with dog point－－开槽圆柱头轴位螺钉UDC 621.882.2 | GB 830-88 | 代替GB830-76Slotted cheese head screws with shoulder－－开槽无头轴位螺钉UDC 621.882.2 | GB 831-88 | 代替GB831-76Slotted shoulder screws－－开槽带孔球面圆柱头螺钉UDC 621.882.2 | GB 832-88 | 代替GB832-76Slotted capstan screws－－开槽大圆柱头螺钉UDC 621.882.2 | GB 833-88 | 代替GB833-76Slotted large cheese head screws－－滚花高头螺钉UDC 621.882.2 | GB 834-88 | 代替GB834-76Knurled thumb screws－－滚花平头螺钉UDC 621.882.2 | GB 835-88 | 代替GB835-76Knurled screws－－滚花小头螺钉UDC 621.882.2 | GB 836-88 | 代替GB836-76Knurled screws with small head－－开槽盘头不脱出螺钉UDC 621.882.2 | GB 837-88 | 代替GB837-76Slotted pan head screws with waisted shank－－六角头不脱出螺钉UDC 621.882.2 | GB 838-88 | 代替GB838-76Hexagon screws with waisted shank－－滚花头不脱出螺钉UDC 621.882.2 | GB 839-88 | 代替GB839-76Knurled thumb screws with waisted shank－－塑料滚花头螺钉UDC 621.882.2 | GB 840-88 | 代替GB840-79Plastic diamond knurlhead screws－－开槽球面圆柱头轴位螺钉UDC 621.882.2 | GB 946-88 | 代替GB946-76Slotted raised head with shoulder－－开槽球面大圆柱头螺钉UDC 621.882.2 | GB 947-88 | 代替GB947-76Slotted large raised cheese head screws－－开槽沉头不脱出螺钉UDC 621.882.2 | GB 948-88 | 代替GB948-76Slotted countersunk head screws with waisted shank－－开槽半沉头不脱出螺钉UDC 621.882.2 | GB 949-88 | 代替GB949-76Slotted raised countersunk head screws with waisted shank－－内六角花形盘头螺钉UDC 621.882.2 | GB 2672-86 | 代替GB2672-81Hexagon lobular socket pan head screws－－内六角花形沉头螺钉UDC 621.882.2 | GB 2673-86 | 代替GB2673-81Hexagon lobular socket countersunk head screws－－内六角花形半沉头螺钉UDC 621.882.2 | GB 2674-86 | 代替GB2674-81Hexagon lobular socket raised countersunk head screws－－内六角圆柱头轴肩螺钉UDC 621.882.215.6 | GB 5281-85 |Hexagon socket head shoulder screws－－内六角花形圆柱头螺钉-4.8级UDC 621.882.2 | GB 6190-86 | 代替GB2671-81 Hexagon lobular socket head cap screws-property class 4.8－－内六角花形圆柱头螺钉-8.8和10.9级UDC 621.882.2 | GB 6191-86 | 代替GB2671-81 Hexagon lobular socket head cap screws-property class 8.8 and 10.9－－精密机械用紧固件十字槽螺钉GB /T 13806.1-92 |Fasteners for mechanics-Cross recessed screws垫圈－－标准型弹簧垫圈UDC 621.882.4 | GB 93-87 | 代替GB93-76Single coil spring lock washers Normal type－－平垫圈C级ISO 7091：2000 | GB /T 95-2002 | 代替GB/T 95-1985Plain washers-Product grade C－－大垫圈A级ISO 7093-1：2000 | GB /T 96.1-2002 | 代替GB/T 96-1985Plain washers-Large series-Product grade A－－大垫圈C级ISO 7093-2：2000 | GB /T 96.2-2002 | 代替GB/T 96-1985Plain washers-Large series-Product grade C－－平垫圈A级ISO 7089：2000 | GB /T 97.1-2002 | 代替GB/T 97.1-1985Plain washers-Product grade A－－平垫圈倒角型A级ISO 7090：2000 | GB /T 97.2-2002 | 代替GB/T 97.2-1985Plain washers,chamfered-Product grade A－－销轴用平垫圈ISO 8738：1986 | GB /T 97.3-2000 |Plain washers for clevis pins－－平垫圈用于螺钉和垫圈组合件ISO 10673：1998 | GB /T 97.4-2002 | 代替GB/T 9074.24、9074.25-1988Plain washers for screw and washer assemblies－－平垫圈用于自攻螺钉和垫圈组合件ISO 10669：1999 | GB /T 97.5-2002 | 代替GB/T 9074.29、9074.30-1988Plain washers for tapping screw and washer assemblies－－小垫圈A级ISO 7092：2000 | GB /T 848-2002 | 代替GB/T 848-1985Plain washers-small series-Product grade A－－球面垫圈UDC 621.882.4 | GB 849-88 | 代替GB849-76Washers with ball face－－锥面垫圈UDC 621.882.4 | GB 850-88 | 代替GB850-76Washers with cone face－－开口垫圈UDC 621.882.4 | GB 851-88 | 代替GB851-76Washers with split－－工字钢用方斜垫圈UDC 621.882.4 | GB 852-88 | 代替GB852-76Square taper washers for I section－－槽钢用方斜垫圈UDC 621.882.4 | GB 853-88 | 代替GB853-76Square taper washers for slot section－－单耳止动垫圈UDC 621.882.4 | GB 854-88 | 代替GB854-76Tab washers with long tab－－双耳止动垫圈UDC 621.882.4 | GB 855-88 | 代替GB855-76Tab washers with long tab and wing－－外舌止动垫圈UDC 621.882.4 | GB 856-88 | 代替GB856-76External tab washers－－圆螺母用止动垫圈UDC 621.882.4 | GB 858-88 | 代替GB858-76Tab washers for round nut－－轻型弹簧垫圈UDC 621.882.4 | GB 859-87 | 代替GB859-76Single coil spring lock washers,Light type－－鞍形弹性垫圈UDC 621.882.4 | GB 860-87 | 代替GB860-76Curved spring washers－－内齿锁紧垫圈UDC 621.882.4 | GB 861.1-87 | 代替GB861-76Lock washers internal teeth－－内锯齿锁紧垫圈UDC 621.882.4 | GB 861.2-87 |Serrated lock washers internal teeth－－外齿锁紧垫圈UDC 621.882.4 | GB 862.1-87 | 代替GB862-76Lock washers external teeth－－外锯齿锁紧垫圈UDC 621.882.4 | GB 862.2-87 |Serrated lock washers external teeth－－波形弹性垫圈UDC 621.882.4 | GB 955-87 | 代替GB955-76Wave spring washers－－锥形锁紧垫圈UDC 621.882.4 | GB 956.1-87 | 代替GB956-76 Countersunk external toothed lock washers－－锥形锯齿锁紧垫圈UDC 621.882.4 | GB 956.2-87 |Countersunk Serrated external toothed lock washers－－特大垫圈C级ISO 7094：2000 | GB /T 5287-2002 | 代替GB/T 5287-1985 Plain washers-Extra large series-Product grade C－－重型弹簧垫圈UDC 621.882.4 | GB 7244-87 |Single coil spring lock washers,heavy type－－鞍形弹簧垫圈UDC 621.882.4 | GB 7245-87 |Curved Single coil spring lock washers－－波形弹簧垫圈UDC 621.882.4 | GB 7246-87 |Wave Single coil spring lock washers木螺钉－－开槽圆头木螺钉UDC 621.882.2 | GB 99-86 | 代替GB99-76Slotted round head wood screws－－开槽沉头木螺钉UDC 621.882.2 | GB 100-86 | 代替GB100-76Slotted countersunk head wood screws－－开槽半沉头木螺钉UDC 621.882.2 | GB 101-86 | 代替GB101-76Slotted raised countersunk head wood screws－－六角头木螺钉UDC 621.882.2 | GB 102-86 | 代替GB102-76Hexagon head wood screws－－十字槽圆头木螺钉UDC 621.882.2 | GB 950-86 | 代替GB950-76Cross recessed round head wood screws－－十字槽沉头木螺钉UDC 621.882.2 | GB 951-86 | 代替GB951-76Cross recessed countersunk head wood screws－－十字槽半沉头木螺钉UDC 621.882.2 | GB 952-86 | 代替GB952-76Cross recessed raised head countersunk head wood screws自攻螺钉－－十字槽盘头自攻螺钉UDC 621.882.216.5.082.8 | GB 845-85 | 代替GB845-76 Cross recessed pan head tapping screws－－十字槽沉头自攻螺钉UDC 621.882.216.5.082.8 | GB 846-85 | 代替GB846-76 Cross recessed countersunk head tapping screws－－十字槽半沉头自攻螺钉UDC 621.882.216.5.082.8 | GB 847-85 | 代替GB847-76 Cross recessed raised countersunk head tapping screws－－开槽盘头自攻螺钉UDC 621.882.215.082.8 | GB 5282-85 |Slotted pan head tapping screws－－开槽沉头自攻螺钉UDC 621.882.215.082.8 | GB 5283-85 |Slotted countersunkhead tapping screws－－开槽半沉头自攻螺钉UDC 621.882.215.082.8 | GB 5284-85 |Slotted raised countersunkhead tapping screws－－六角头自攻螺钉UDC 621.882.215.082.8 | GB 5285-85 |Hexagon head tapping screws－－十字槽盘头自攻锁紧螺钉UDC 621.882 | GB 6560-86 |Cross recessed pan head thread forming screws－－十字槽沉头自攻锁紧螺钉UDC 621.882 | GB 6561-86 |Cross recessed countersunk head thread forming screws－－十字槽半沉头自攻锁紧螺钉UDC 621.882 | GB 6562-86 |Cross recessed raised countersunk head thread forming screws－－六角头自攻锁紧螺钉UDC 621.882 | GB 6563-86 |Hexagon head thread forming screws－－内六角花形圆柱头自攻锁紧螺钉UDC 621.882 | GB 6564-86 |Hexagon lobular socket thread forming screws－－十字槽头凹穴六角头自攻螺钉UDC 621.882.2 | GB 9456-88 |Cross recessed hexagon head tapping screws with indentation－－精密机械用紧固件十字槽自攻螺钉刮削端GB /T 13806.2-92 |Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point－－墙板自攻螺钉GB /T 14210-93 |Dry wall screws－－十字槽盘头自钻自攻螺钉ISO 15481:1999 | GB /T 15856.1-2002 | 代替GB/T 15856.1-1995Cross recessed pan head drilling screws with tapping screw thread－－十字槽沉头自钻自攻螺钉ISO 15482:1999 | GB /T 15856.2-2002 | 代替GB/T 15856.2-1995Cross recessed countersunk head drilling screws with tapping screw thread－－十字槽半沉头自钻自攻螺钉ISO 15483:1999 | GB /T 15856.3-2002 | 代替GB/T 15856.3-1995Cross recessed raised countersunk head drilling screws with tapping screw thread－－六角法兰面自钻自攻螺钉GB /T 15856.4-2002 | 代替GB/T 15856.4-1995Hexagon flange drilling screws with tapping screw thread－－六角凸缘自钻自攻螺钉ISO 15480:1999 | GB /T 15856.5-2002 |Hexagon washer head drilling screws with tapping screw thread－－六角凸缘自攻螺钉ISO 7053:1992 | GB /T 16824.1-1997 |Hexzgon head tapping screws with collar－－六角法兰面自攻螺钉ISO 10509:1992 | GB /T 16824.2-1997 |Hexagon flange head tapping screws销－－开口销ISO 1234:1997 | GB /T 91-2000 | 代替GB/T 91-1986Split pins－－圆锥销ISO 2339:1986 | GB /T 117-2000 | 代替GB/T 117-1996Taper pins－－内螺纹圆锥销ISO 8736:1986 | GB /T 118-2000 | 代替GB?T 118-1996Taper pins with internal thread－－圆柱销不淬硬钢和奥氏体不锈钢ISO 2338:1997 | GB /T 119.1-2000 | 代替GB/T 119-1986Parallel pins,of unhardened steel and austenitic stainless steel－－圆柱销淬硬钢和马氏体不锈钢ISO 8734:1997 | GB /T 119.2-2000 | 代替GB/T 119-1986Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)－－内螺纹圆柱销不淬硬钢和奥氏体不锈钢ISO 8733:1997 | GB /T 120.1-2000 | 代替GB/T 120-1986Parallel pins with internal thread, of unhardened steel and austenitic stainless steel－－内螺纹圆柱销淬硬钢和马氏体不锈钢ISO 8735:1997 | GB /T 120.2-2000 | 代替GB/T 120-1986Parallel pins with internal thread,of hardened steel and martensitic stainless steel－－开尾圆锥销UDC 621.886 | GB 877-76 | 代替GB877-76Taper pins with split－－螺纹圆柱销UDC 621.886 | GB 878-86 | 代替GB878-76Parallel pins with external thread－－弹性圆柱销直槽重型ISO 8752:1997 | GB /T 879.1-2000 | 代替GB/T 879-1986 Spring-type straight pins-Slotted, heavy duty－－弹性圆柱销直槽轻型ISO 13337:1997 | GB /T 879.2-2000 |Spring-type straight pins-Slotted,light duty－－弹性圆柱销卷制重型ISO 8748:1997 | GB /T 879.3-2000 |Spring-type straight pins-Coiled,heavy duty－－弹性圆柱销卷制标准型ISO 8750:1997 | GB /T 879.4-2000 |Spring-type straight pins-Coiled,standard duty－－弹性圆柱销卷制轻型ISO 8751:1997 | GB /T 879.5-2000 |Spring-type straight pins-Coiled,light duty－－带孔销UDC 621.886 | GB 880-86 | 代替GB880-76Pins with split pin hole－－螺尾锥销ISO 8737:1986 | GB /T 881-2000 | 代替GB/T 881-1986Taper pins with external thread－－销轴UDC 621.886 | GB 882-86 | 代替GB882-76Clevis pins with head－－槽销平行沟槽GB /T 13829.1-92 |Crooved pins-Parallel grooved－－槽销锥销GB /T 13829.2-92 |Crooved pins-taper grooved－－槽销圆头沉头GB /T 13829.3-92 |Grooved pins-with round head or countersunk head铆钉－－平头铆钉UDC 621.884 | GB 109-86 | 代替GB109-76Flat head rivets－－标牌铆钉UDC 621.884 | GB 827-86 | 代替GB827-76Rivets for name plate－－半圆头铆钉(粗制)UDC 621.884 | GB 863.1-86 | 代替GB863-76Round head rivets-Black－－小半圆头铆钉(粗制)UDC 621.884 | GB 863.2-86 |Round head rivets with small head-Black－－平锥头铆钉(粗制)UDC 621.884 | GB 864-86 | 代替GB864-76Cone head rivets-Black－－沉头铆钉(粗制)UDC 621.884 | GB 865-86 | 代替GB865-86Countersunk head rivets-Black－－半沉头铆钉(粗制)UDC 621.884 | GB 866-86 | 代替GB866-76Oval countersunk head rivets-Black－－半圆头铆钉UDC 621.884 | GB 867-86 | 代替GB867-76Round head rivets－－平锥头铆钉UDC 621.884 | GB 868-86 | 代替GB868-76Cone head rivets－－沉头铆钉UDC 621.884 | GB 869-86 | 代替GB869-76 Countersunk head rivets－－半沉头铆钉UDC 621.884 | GB 870-86 | 代替GB870-76Oval countersunk head rivets－－扁圆头铆钉UDC 621.884 | GB 871-86 | 代替GB871-76Flat round head rivets－－扁平头铆钉UDC 621.884 | GB 872-86 | 代替GB872-76Thin head rivets－－扁圆头半空心铆钉UDC 621.884 | GB 873-86 | 代替GB873-76 Oval head semi-tubular rivets－－120°沉头半空心铆钉UDC 621.884 | GB 874-86 | 代替GB874-76 120 degree countersunk head semi-tubular rivets－－扁平头半空心铆钉UDC 621.884 | GB 875-86 | 代替GB875-76 Thin head semi-tubular rivets－－空心铆钉UDC 621.884 | GB 876-86 | 代替GB876-76Tubular rivets－－120°沉头铆钉UDC 621.884 | GB 954-86 | 代替GB954-76120 degree countersunk head rivets－－管状铆钉UDC 621.884 | GB 975-86 | 代替GB975-76Pipe type rivets－－大扁圆头铆钉UDC 621.884 | GB 1011-86 | 代替GB1011-76 Truss head rivets－－120°半沉头铆钉UDC 621.884 | GB 1012-86 | 代替GB1012-76 120 degree oval countersunk rivets－－平锥头半空心铆钉UDC 621.884 | GB 1013-86 | 代替GB1013-76 Cone head semi-tubler rivets－－大扁圆头半空心铆钉UDC 621.884 | GB 1014-86 | 代替GB1014-76 Truss head semi-tublar rivets－－沉头半空心铆钉UDC 621.884 | GB 1015-86 | 代替GB1015-76 Countersunk head semi-tublar rivets－－无头铆钉UDC 621.884 | GB 1016-86 | 代替GB1016-76 Headless rivets－－封闭型扁圆头抽芯铆钉GB 12615-90 |Mushroom head break mandrel closed end blind rivets－－封闭型沉头抽芯铆钉GB 12616-90 |120 deg flush head break mandrel closed end blind rivets－－开口型沉头抽芯铆钉GB 12617-90 |120 deg flush head break mandrel blind rivets－－开口型扁圆头抽芯铆钉GB 12618-90 |Mushroom head break mandrel blind rivets－－扁圆头击芯铆钉GB /T 15855.1-1995 |Flat round head drive rivets－－沉头击芯铆钉GB /T 15855.2-1995 |Countersunk head drive rivets挡圈－－锥销锁紧挡圈UDC 621.885 | GB 883-86 | 代替GB883-76Lock rings with cone pin－－螺钉锁紧挡圈UDC 621.885 | GB 884-86 | 代替GB884-76Lock ring with screw－－带锁圈的螺钉锁紧挡圈UDC 621.885 | GB 885-86 | 代替GB885-76 Lock rings with screw and circlip－－轴肩挡圈UDC 621.885 | GB 886-86 | 代替GB886-76Rings for shoulder－－螺钉紧固轴端挡圈UDC 621.885 | GB 891-86 | 代替GB891-76Lock rings at the end of shaft with screw－－螺栓紧固轴端挡圈UDC 621.885 | GB 892-86 | 代替GB892-76Lock rings at the end of shaft with bolt－－孔用弹性挡圈-A型UDC 621.885 | GB 893.1-86 | 代替GB893-76 Circlips for holes-type A－－孔用弹性挡圈-B型UDC 621.885 | GB 893.2-86 |Circlips for hole-type B－－轴用弹性挡圈-A型UDC 621.885 | GB 894.1-86 | 代替GB894-76 Circlips for shaft-type A－－轴用弹性挡圈-B型UDC 621.885 | GB 894.2-86 |Circlips for shaft-type B－－孔用钢丝挡圈UDC 621.885 | GB 895.1-86 | 代替GB895-76 Roundwire snap rings for hole－－轴用钢丝挡圈UDC 621.885 | GB 895.2-86 | 代替GB895-76 Roundwire snap rings for shaft－－开口挡圈UDC 621.885 | GB 896-86 | 代替GB896-76“E”rings－－钢丝锁圈UDC 621.885 | GB 921-86 | 代替GB921-76Round wire circlips－－夹紧挡圈UDC 621.885 | GB 960-86 | 代替GB960-76Grip rings紧固件-组合件和连接副－－钢结构用高强度大六角头螺栓GB /T 1228-91 | 代替GB1228-84 High strength bolts with large hexagon head for steel structures－－钢结构用高强度大六角头螺母GB /T 1229-91 | 代替GB1229-84High strength large hexagon nuts for steel structures－－钢结构用高强度垫圈GB /T 1230-91 | 代替GB1230-84High strength plain washers for steel structures－－钢结构用扭剪型高强度螺栓连接副GB /T 3632-1995 | 代替GB3632-83Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures－－螺栓或螺钉和平垫圈组合件ISO 10644：1998 | GB /T 9074.1-2002 | 代替GB/T 9074.1、9074.14-1988Bolt or screw and washer assemblies with plain washers－－十字槽头螺钉和外锯齿锁紧垫圈组合件UDC 621.882 | GB 9074.2-88 |Cross recessed pan head screw and serrated lock washer external teeth assemblies－－十字槽盘头螺钉和弹簧垫圈组合件UDC 621.882 | GB 9074.3-88 |Cross recessed pan head screw and single coll spring lock washer assemblies－－十字槽盘头螺钉、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.4-88 |Cross recessed pan head screw, single coil spring lock washer assemblies－－十字槽小盘头螺钉和平垫圈组合件UDC 621.882 | GB 9074.5-88 |Cross recessed small pan head screw and small plain washer assemblies－－十字槽小盘头螺钉和大垫圈组合件UDC 621.882 | GB 9074.6-88 |Cross recessed small pan head screw and big plain washer assemblies－－十字槽小盘头螺钉和弹簧垫圈组合件UDC 621.882 | GB 9074.7-88 |Cross recessed small pan head screw and single coil spring lock washer assemblies－－十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.8-88 |Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies －－十字槽沉头螺钉和锥形锁紧垫圈组合件UDC 621.882 | GB 9074.9-88 |Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies－－十字槽半沉头螺钉和锥形锁紧垫圈组合件UDC 621.882 | GB 9074.10-88 |Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies－－十字槽凹穴六角头螺栓和平垫圈组合件UDC 621.882 | GB 9074.11-88 |Cross recessed hexagon bolt with indentation and plain washer assemblies－－十字槽凹穴六角头螺栓和弹簧垫圈组合件UDC 621.882 | GB 9074.12-88 |Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies－－十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.13-88 | Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies －－六角头螺栓和弹簧垫圈组合件UDC 621.882 | GB 9074.15-88 |Hexagon head bolt and single coil spring lock washer assemblies－－六角头螺栓和外锯齿锁紧垫圈组合件UDC 621.882 | GB 9074.16-88 |Hexagon head bolt and serrated lock washer external teeth assemblies－－六角头螺栓、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.17-88 |Hexagon head bolt,single coil spring lock washer and plain washer assemblies－－自攻螺钉和平垫圈组合件ISO 10510：1999 | GB /T 9074.18-2002 | 代替GB/T 9074.18、9074.19、9074、22、9074、23-1988Tapping screw and washer assemblies with plain washers－－十字槽凹穴六角头自攻螺钉和平垫圈组合件UDC 621.882 | GB 9074.20-88 |Cross recessed hexagon head tapping screw with indentation and plain washer assemblies－－十字槽凹穴六角头自攻螺钉和大垫圈组合件UDC 621.882 | GB 9074.21-88 |Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies。
紧固件常识大全中英文对照
第一章 产品分类螺丝（Bolt / Screw）一、外六角螺栓/螺丝（Hex Head Cap Bolt / Screw---HCS）二、内六角螺丝（Socket Head Cap Screw---SHCS）1. 圆柱头内六角螺丝（Socket Head Cap Screw---SHCS）2. 半圆头内六角螺丝（Button Head Socket Cap Screw---BH SHCS）3. 平头/沉头内六角螺丝（Flat Head Socket Cap Screw---FH SHCS）4. 低头内六角螺丝（Low Head Socket Cap Screw---LH SHCS）三、内六角紧定螺钉（Socket Set Screw---SSS）1. 内六角平端紧定螺钉（Socket Set Screw with Die / Flat Point---SSS FT）2. 内六角球面紧定螺钉（Socket Set Screw with Round Point---SSS RD）3. 内六角锥端紧定螺钉（Socket Set Screw with Cone Point---SSS CN）4. 内六角凹端紧定螺钉（Socket Set Screw with Cup Point---SSS CP）5. 内六角滚花凹端紧定螺钉（Socket Set Screw with Knurled Cup Point---SSS KNL)6. 内六角长圆柱端紧定螺钉（Socket Set Screw with Full Dog Point---SSS DOG）7. 内六角短圆柱端紧定螺钉（Socket Set Screw with Half Dog Point---SSS ½ DOG）四、内六角圆柱头轴肩螺钉（Socket Shoulder Screw）五、方头螺栓（Square Head Bolts---SQHD）六、马车螺栓（Carriage Bolt---CB）七、吊环螺栓（Eye Bolt）八、U型螺栓（U Bolt）九、牙条（Stud---14”以下/ Threaded Rod）十、机螺丝（Machine Screw---MS）常见头型：1. 圆头机螺丝（Round Head Machine Screw---RH MS）2. 平头/沉头机螺丝（Flat Head Machine Screw---FH MS）3. 盘头机螺丝（Pan Head Machine Screw---PH MS）4. 大扁头机螺丝（Truss Head Machine Screw---TH MS）5. 半沉头机螺丝（Oval Head Machine Screw）6. 圆柱头机螺丝（Cheese Head Machine Screw）7. 六角头带垫片螺丝（Hex Washer Head Screw）常见槽型：1. 一字槽（Slotted）2. 十字槽（Philips）3. 米字槽（Posidriv）4. 梅花槽（Torx）十一、自攻钉（Tapping Screw）常见头型：1. 盘头（Pan Head）2. 沉头（Flat Head）3. 半沉头（Oval Head）常见牙型：1. A型（Type A）2. B型（Type B）3. AB型（Type AB）4. 三角形（Trilobe / Thread Rolling）5. 17型（Type 17）6. F型（Type F）7. 23型（Type 23）8. 25型（Type 25）十二、自钻钉（Self-Drilling Screw）螺母（Nut）一、六角螺母（Finished Hex Nut---FHN）二、重型六角螺母（Heavy Hex Nut）三、六角开槽螺母（Slotted Hex Nut）四、皇冠螺母（Hex Castle Nut）五、盖形螺母（Acorn Nut）六、蝶形螺母（Wing Nut）七、方形螺母（Square Nut）八、齿形螺母（K-Lock Nut / Keps Nut）九、六角薄螺母（Hex Jam Nut）十、法兰螺母（Serrated Hex Flange Nut）十一、尼龙锁紧螺母（Nylon Insert Lock Nut）十二、顶部锁紧螺母（Top Lock Nut）垫片（Washer）一、平垫片（Flat Washer---F/W）二、弹簧垫片（Spring Lock Washer---L/W）三、齿形垫片（Toothed Lock Washer）1. 外齿垫片（External Tooth Lock Washer---EXT L/W）2. 内齿垫片（Internal Tooth Lock Washer---INT L/W）3. 内外齿垫片（Combination Tooth Lock Washer---INT/EXT L/W）销子（Pin）一、圆柱销（Dowel Pin）二、弹性销（Spring Pin）三、开口销（Cotter Pin）四、锥形销（Taper Pin）铆钉（Rivet）一、圆头铆钉（Button Head Rivet）二、凸缘铆钉（Flange Head Rivet）三、沉头铆钉（Countersunk Head Rivet）四、闭端式铆钉（Closed-End Head）第二章 产品性能等级标记英制螺栓/螺丝/牙条性能等级：等级标记性能等级英文缩写中文简称产品名称SAE J429 Grade 2Gr. 2 2级螺栓/螺丝ASTM A307 Grade307A 307A 螺栓/螺丝ASAE J429 Grade 5Gr. 5 5级螺栓/螺丝ASTM A449 Type 1ASTM A354Gr. BD BD级螺栓/螺丝Grade BDSAE J429 Grade 8Gr. 8 8级螺栓/螺丝ASTM A193Grade B7 Gr. B7 B7 牙条/螺丝 (合金钢）ASTM A193Grade B7M Gr. B7M B7M 牙条 (合金钢）ASTM A193Grade B8 Gr. B8 B8 牙条 (304不锈钢）ASTM A193Grade B8M Gr. B8M B8M 牙条 (316不锈钢）英制螺母性能等级：等级标记性能等级英文缩写中文简称产品名称ASTM A563Grade A Gr. A A级螺母ASTM A563Grade C Gr. C C级螺母ASTM A563Grade DH Gr. DH DH级螺母SAE J995 Grade 5 Gr. 5 5级螺母SAE J995 Grade 8 Gr. 8 8级螺母ASTM A194Grade 2H Gr. 2H 2H级螺母ASTM A194Grade 2HM Gr. 2HM2HM级螺母公制螺栓/螺丝性能等级：等级标记性能等级英文缩写中文简称产品名称Class 4.8 CL 4.8 4.8级螺栓/螺丝Class 5.8 CL 5.8 5.8级螺栓/螺丝Class 8.8 CL 8.8 8.8级螺栓/螺丝Class 9.8 CL 9.8 9.8级螺栓/螺丝Class 10.9 CL 10.9 10.9级螺栓/螺丝Class 12.9 CL 12.9 12.9级螺栓/螺丝公制螺母性能等级：等级标记性能等级英文缩写中文简称产品名称Class8 CL 8 8级螺母Class10 CL 10 10级螺母Class12CL 12 12级螺母英制产品性能等级标记：性能等级 产品 产品尺寸 in. 是否有等级标记 A307 Gr. A Bolts, Screws, Studs 1/4 to 4 是A307 Gr. B Bolts, Screws, Studs 1/4 to 4 是SAE Gr. 1 Bolts, Screws, Studs 1/4 to 1-1/2 否SAE Gr. 2 Bolts, Screws, Studs 1/4 to 3/4 否SAE Gr. 5 Bolts, Screws, Studs 1/4 to 1-1/2 是A449 Type 1 Bolts, Screws, Studs 1/4 to 3 是A325 Type 1 Bolts, Screws, Studs 1/2 to 1-1/2 是SAE Gr. 5.2 Bolts, Screws, Studs 1/4 to 1 是A449 Type 2 Bolts, Screws, Studs 1/4 to 2 是A325 Type 3 Bolts, Screws, Studs 1/2 to 1-1/2 是SAE Gr. 8 Bolts, Screws, Studs 1/4 to 1-1/2 是A354 Gr. BD Bolts, Screws, Studs 1/4 to 4 是A490 Type 1 Bolts, Screws, Studs 1/2 to 1-1/2 是SAE Gr. 8.2 Bolts, Screws, Studs 1/4 to 1 是A490 Type 3 Bolts, Screws, Studs 1/2 to 1-1/2 是 A193Studs ≥ 3/8 是 B7/B7M/B8/B8M Bolts ≥ 1/4 是A194 2H/2HM Nuts ≥ 1/4 是Studs > 3/8 是 F593Bolts ≥ 1/4 是 A563 Gr. C/C3 Heavy Hex Nuts ≥ 1/4 是A563 Gr. D/DH Nuts ≥ 1/4 是公制产品性能等级标记：性能等级 产品 产品尺寸 mm 是否有等级标记 4.6/4.8/5.8/8.8/Hex Bolts/Screws ≥ 5 是9.8/10.9/12.98.8及其以上 Socket/Torx Head Cap Screws≥ 5 是8.8及其以上 Carriage Bolts ≥ 5 是5.6/8.8及其以上 Studs ≥ 5 是4/5/6/8/9/10/12 Nuts ≥ 5 是对于螺栓/螺丝的等级标记应打在头部顶面，螺柱/牙条的等级标记应打在拧入螺母端或无螺纹杆部，螺母的等级标记应打在螺母支撑面上。
最全紧固件中英文对照资料
最全緊固件中英文對照，外貿必備詞典！一、緊固件 Fasteners標準緊固件 Standard Fasteners非標準緊固件 Nonstandard Fasteners特殊緊固件 Special Fasteners汽車緊固件 Automotive Fasteners銅制緊固件 Brass Fasteners航天用緊固件 Aerospace Fasteners精密緊固件 Precision Fasteners化學緊固件 Chemical Fasteners摩托車緊固件 Motorcycle Fasteners不銹鋼緊固件 Stainless Steel Fasteners鐵道緊固件 Railway Fasteners防松緊固件 Self-locking Fasteners高強度緊固件 High strength FastenersPEM緊固件 PEM Fasteners鋼結構緊固件 Steel Structural Fasteners壓鉚緊固件 Self-Clinching Fasteners鋁制緊固件 Aluminum Fasteners鈦合金緊固件 Titanium Alloy Fasteners尼龍緊固件 Nylon Fasteners精制緊固件 Finished Fastener粗制緊固件 Unfinished Fastener螺紋緊固件 Threaded Fastener半精制緊固件 Semi-Finished Fastener抗剪緊固件 Shear Fastener抗拉緊固件 Tension Fastener面板緊固件 Panel Fasteners二、螺栓 Bolts六角頭螺栓Hexagon Head Bolts六角法蘭面螺栓Hexagon Flange Bolts軌道螺栓（魚尾螺絲）Track Bolts高強度螺栓 High Strength Bolts地腳螺栓Eyelet Bolts馬車螺栓 Carriage Bolts護攔螺栓 Guardrail Bots焊接螺栓 Weld Bolts雙頭螺栓 Double End Bolts鋼結構連接副 Structural Bolting內六角螺栓 Hex Socket Bolts合金鋼螺栓 Alloy Steel Bolts方頭螺栓 Square Head Bolts/Square Bolts鉤頭螺栓 Hook Bolts不銹鋼螺栓 Stainless steel Bolts異型螺栓 Special Bolts吊環螺栓 Lifting Eye Bolts汽車螺栓 Automotive Bolts法蘭螺栓 Flange Bolts輪胎螺栓 Wheel BoltsT型螺栓 T Bolts扁頭螺栓 Pan Head Bolts蝶形螺栓 Wing Bolts沉頭螺栓 Countersunk Bolts沉頭方頸螺栓 Countersunk Square Neck Bolts帶榫螺栓 Cup head Nib Bolts沉頭雙榫螺栓 Flat Countersunk Double Nib Bolts活節螺栓 Eye Bolts壓鉚螺栓 Clinching Bolts紅打螺栓 Hot Forging Bolts圓頭螺栓 Round Head Bolts圓頭方頸螺栓 Round Head Square Neck Bolts圓頭雙榫螺栓 Round Head Fin Neck Bolts米制圓頭方頸螺栓 Metric Round Head Square Neck BoltsT型帶孔螺栓 T bolts withHole六角頭鉸制孔用螺栓 Hexagon Fit Bolts六角頭螺桿帶孔螺栓 Hexagon Bolts with split pin hole on shank鋼網架螺栓球節點用高強度螺栓 High Strength Bolts for joints ofspace grid structures 基礎螺栓 Foundation BoltsU型螺栓 U Bolts高張力螺栓 High Strength Bolts大尺寸螺栓 Big Size Bolts螺椿栓 Stud Bolts拉栓 Blind Bolts重型六角頭螺栓 Heavy Hex Bolts大頭馬車螺栓 Step Bolts扭矩控制螺栓 T.C. Bolts蛋形頸軌道用螺栓 Elliptic Neck Track Bolts調節螺栓，調節螺釘 Pitch-Adjustable Bolts and Screws加長非標雙頭螺栓 Lengthen Non-Standard Stud Bolts電梯膨脹螺栓 Elevator Expansion Bolts三、螺釘 Screws六角螺釘Hex Head Cap Screws/Hex Screws六角機械螺釘 Hex Head Machine Bolts六角法蘭螺釘 Hex Flange Screws內六角孔螺絲 Hex Socket Cap Screws內六角沉頭螺釘 Hex Socket Flat Countersunk Head Cap Screws緊定螺釘/固定螺釘 Set Screws止付螺釘Socket Set Screws方頭緊定螺釘 Square Head Slotted Head Set Screws翼形螺釘/蝶形螺釘 Wing Screws精密螺釘 Precision Screws自攻螺釘 Self-Tapping Screws自削螺釘 Thread Cutting Screws鉆尾螺釘 Self-Drilling Screws旋入螺釘 Drive Screws機械螺釘 Machine Screws木螺釘 Wood Screws家具螺釘 Furniture Screws纖維板釘/塑板螺釘 Chipboard Screws墻用螺釘 Drywall Screws剪力釘(焊接螺釘) Welding Studs螺絲附華司組合 Screws And Washers Assembled (Sems)銅螺釘 Brass Screws鋁螺釘 Aluminum Screws合金鋼螺釘 Alloy Steel Screws組合螺釘 SEM screws電子螺釘 Electronic Screws微小精密螺釘 Micro Screws塑料螺釘 Plastic Screws復合材料用螺釘 Particle Board Screws鈦合金螺釘 Titanium Alloy Bolts鈦、鋯、鉬、鈮等螺絲、零件、材料 Ti ,Zr ,Mo, Nb Pare Metal Bolts Parts 拇指螺絲 Thumb Screws飛機特殊扣件 Source Control Bolts電梯螺釘 Elevator Screws四角頭固定螺釘 Square Set Screws單向螺釘 One Way Lag Screws管夾螺釘 Hose Clamp Screws不銹鋼固定螺釘 Stainless Steel Hex Socket Cap Screws不銹鋼內六角螺釘 Stainless Steel Hex Socket Cap Screws鉸鏈螺釘 Hinge Screws貨柜螺釘 Container Screws復合材料鉆尾螺釘 Bi-Metal Self Drilling Screws三角牙螺釘 Tri-lobular Thread Screws高低牙螺釘 High Low Screws夾板用螺釘 Particle Board Screws馬桶螺釘 Toilet Closet Bolts特長螺釘 Special Longer Screws建業螺釘 Building Fasteners不銹鋼六角螺絲 Stainless Steel Hex Socket Cap Screws不銹鋼特殊螺釘 Special Stainless Steel Screws寬牙螺釘（粗牙螺釘） Coarse Thread Screws鏈帶螺釘 Collated Screws水泥螺釘 Concrete Screws板模螺釘 Construction Bolts鋅蝶螺釘 Die Cast Wing Screws; Zinc Alloy重型車釘 Heavy Duty Wheel Hub Bolts內六角固定螺釘 Hex Socket Set Screws復合材料用螺釘（夾板用） Particle Board Screws犁壁螺釘 Plow Bolts不銹鋼木螺絲 Stainless Steel Wood Screws套掛螺栓及螺釘 Toggle Bolts鈦合金膨脹螺釘 Titanium Alloy Expansion Bolts不銹鋼高低牙螺釘 Stainless Steel High-Low Thread Screws不銹鋼機械螺釘 Stainless Steel Machine Screws不銹鋼鉆尾螺釘 Stainless Steel Self Drilling Screws不銹鋼自攻螺釘 Stainless Steel Self Tapping Screws不銹鋼自削螺釘 Stainless Steel Thread Cutting Screws不銹鋼三角牙螺釘 Stainless Steel Tri-Lobular Thread Screws 不銹鋼寬牙螺釘 Stainless Steel Coarse Thread Screws開槽沉頭螺釘 Slotted Flat Countersunk Head Machine Screws 開槽盤頭螺釘 Slotted Pan Head Machine Screws十字槽盤頭螺釘 Cross Recessed Pan Head Machine Screws 滾花頭臺階螺釘 Knurled Thurmb Screws六角頭木螺釘 Hexagon Head Wood Screws平頭滾花螺釘 Knurled Thin Thumb Screws四、螺母/螺帽 Nuts六角螺母 Hexagon Nuts六角蓋形螺母 Hex Cap Nuts六角鋸齒螺母 Hex Serrated Nuts六角法蘭螺母 Hex Flange Nuts六角平面螺母 Hex Flat Nuts六角厚螺母Hex Thick Nuts重型六角開槽螺母 Heavy Hexagon Slotted Nuts高腳螺母 Hex Coupling Nuts (High Nuts)圓螺母 Round Nuts四角螺母/四方螺母 Square Nuts四方焊接螺母 Square Weld Nuts四爪螺母Four-Claw Nuts管用螺母 Pipe Nuts輪殼螺母 Wheel Nuts蝶型螺母 Wing NutsU形螺母 U NutsT形螺母 T Nuts環首螺母 Eye Nuts齒形螺母 Kep Nuts齒花螺母 Clinch Nuts焊接螺帽 Weld Nuts壓鉚螺母 Self-clinching Nuts高張力螺母 High Strength Nuts建業用螺母 Structural Nuts不銹鋼螺母 Stainless Steel Nuts銅螺母 Brass Nuts鋁螺母 Aluminum Nuts合金鋼螺母 Alloy Steel Nuts重型車螺母 Heavy Duty Wheel Hub Nuts鐵器焊接袋帽 Acorn Cap Nuts金屬預置扭矩式螺母 All-Metal Prevailing Torque Type Nuts壁虎螺母 Anchor Nuts大尺寸螺母 Big Size Nuts鐵蓋袋帽 Closed End Acorn Nuts盤形華司螺母 Conical Washer Nuts鐵蓋+尼龍圈組合蓋帽 Din 986 Domed Cap Nuts法蘭尼龍蓋帽 Flange Nylon Insert Lock Nuts平面華司螺母 Flat Washer Nuts六角割溝螺母 Hex Slotted Nuts自鎖螺母 Self-Locking Nuts制止螺母 Sliding NutsSLN-自動防松螺母 SLN Self-Locking Nuts特殊螺母 Special Nuts彈簧螺母 Spring Nuts不銹鋼法蘭螺母 Stainless Steel Flange Nuts不銹鋼六角輪緣尼龍螺母 Stainless Steel Flange Nylon Insert Lock Nuts 不銹鋼六角重型螺母 Stainless Steel Heavy Hex Nuts不銹鋼六角螺母 Stainless Steel Hex Nuts不銹鋼尼龍嵌入螺母 Stainless Steel Nylon Insert Lock Nuts普通六角螺母 Hex Nuts六角重型螺母 Heavy Hex Nuts薄型螺母 Hex Jam Nuts尼龍嵌入防松螺母 Nylon Insert Lock Nuts尼龍鎖緊螺母Nylon Cage Nuts機械螺絲用六角螺母 Hex Machine Screw Nuts米制六角開槽螺母 Metric Slotted Hex Nuts軌道螺栓用方螺母 Track Bolt Nuts米制六角金屬鎖緊螺母 Prevalling Torque Hexagon Nuts開槽螺母Slotted Round Nuts六角開槽薄螺母Hexagon Slotted Thin Nuts五、螺柱 Studs壓鉚螺柱 Self-Clinching Studs銅螺柱 Brass Studs焊接螺柱 Weld Studs雙頭螺柱 Double End Studs六角螺柱 Hex Studs支撐卡柱 Self-Clinching Standoffs六、墊圈 Washers彈簧墊圈 Spring Washers/Spring Lock Washers寬型彈簧墊圈 Extra-duty Helical Spring Lock Washers杯型墊圈 Cup washers波形墊圈 Wave Washers內齒墊圈 Internal Tooth Washers外齒墊圈 External Tooth Washers銅墊圈 Copper Washers方墊圈 Square Washers密封墊圈 Sealing Washers碟形彈簧墊圈 Disc Spring Washers外舌止動墊圈External Tab Washers高強度墊圈 High strengthen washers橡膠墊圈 Rubber Washers鎖緊墊圈 Lock Washers平墊圈 Plain Washers鞍型彈性墊圈 Curved Spring Washers鋸齒鎖緊彈性墊圈 Toothed lock washers外鋸齒鎖緊墊圈 Serrated Lock Washers錐形墊圈 Taper Washers重型彈簧墊圈 Heavy Spring Lock Washers尼龍墊圈 Nylon Washers淬硬鋼墊圈 Hardened Steel Washers七、鉚釘 Rivets平頭鉚釘 Flat Head Rivets擊芯鉚釘 Drive Rivets彩色鉚釘 Colored Rivets沉頭鉚釘 Countersunk Head Rivets半沉頭鉚釘 Oval Countersunk Head Rivets平錐頭鉚釘 Cone Head Rivets抽芯鉚釘 Blind Rivets開口鉚釘 Split Rivets開口型抽芯鉚釘 Open End Blind Rivets拉鉚釘 Pop Rivets封閉鉚釘Closed End Rivets封閉性抽芯鉚釘 Sealed Type Blind Rivets塑料鉚釘 Plastic Rivets空心鉚釘 Tubular Rivets環槽鉚釘 Ring Groove Rivets單鼓型鉚釘 Single-Grip Rivets圓頭鉚釘 Round Head Rivets高沉頭鉚釘 Countersunk Head Rivets鋁鉚釘 Aluminum Rivets實心鉚釘 Solid Rivets沉頭實心鉚釘 Countersunk Head Solid Rivets燈籠鉚釘 Lantern Blind Rivets半空心鉚釘 Semi-Tubular Rivets圓頭半空心鉚釘 Semi-tubular Pan Head Rivets異型鉚釘 Special Rivets不銹鋼鉚釘 Stainless Steel Rivets雙鼓型鉚釘 Multi-grip Rivets高強度鉚釘 High Strength Rivets臺階鉚釘 Step Rivets面板鉚釘 Tablet Rivets開花型抽芯鉚釘 Flowering Blind Rivets拉花型抽芯鉚釘 Peel Type Blind Rivets溝槽型抽芯鉚釘 Grooved Type Blind Rivet鉚接工具 Riveting Tool八、壁虎（膨脹螺栓）Anchors/Expansion Bolts化學錨栓 Chemical Anchors打入式壁虎 Hammer Drive Anchors內迫壁虎 Drop in Anchors重型壁虎 Heavy Duty Anchors錘釘壁虎 Hit Anchors中空壁虎 Hollow Wall Anchors套管壁虎 Sleeve Anchors插片壁虎 Ceiling Anchors門窗、地板專用壁虎 Nylon Frame Anchors or Metal frame Anchors電梯壁虎 Bolt Anchors車修壁虎 Wedge Anchors魚眼壁虎 Tie Wire Anchors外迫壁虎 Cut Anchors塑料膨脹 Plastic Anchors不銹鋼重載脹栓 Heavy Duty Expansion Anchors象腳壁虎 Elephant Foot Anchors長型蘭花夾 Short Strap Anchors九、銷 Pins開口銷 Split Pins圓錐銷 Taper Pins鎖銷 Lock Pins銷軸 Clevis Pins with head槽銷 Grooved Pins彈性銷 Spring Pins圓柱銷 Parallel Pins彈性圓柱銷 Slotted Spring Pins帶孔銷 Pins with split pin hole十、擋圈 Circlips/Rings開口擋圈 E rings孔用擋圈 Circlips for holes軸用鋼絲擋圈 Roundwire Snap Rings for shaft軸肩擋圈Rings for shoulder夾緊擋圈 Grip Rings軸用卡簧 Circlips for shafts帶齒軸用擋圈 Retaining Rings with Lugs for shafts鋼絲鎖圈 Round wire Circlips錐形鎖緊擋圈 Lock Rings with cone pins十一、其他 Others牙條 Threaded Rod沖壓件 Stampings平鍵 Parallel Keys半圓鍵 Woodruff Keys扳手 Spanners鋼絲螺套 Wire Thread Insert自動車床車削件 CNC Turning Parts齒輪 Gears模具 Molds線材盤元 Iron or steel wire rod鉸鏈 Hinge表面處理 Surface Treatment。
紧固件-中英文对照
No.xx简写中文1 screw scr螺丝2 nut nut螺母3 washer wash垫圈4 head hd头5 thread thre螺纹6 coating coat镀层7 rivet riv铆钉8 standoff stdoff内外六角钉9 driver driv穴10 hexagon hexa六角11 tooth tooth齿12 lock lck锁13 spring spr弹簧14 wave wave波浪型15 pitch pitch牙距16 partial thread PT半螺纹17 PT PT一种螺纹形式18 Full Thread FT全螺纹19 silver silv银20 cone cone锥形21 Eco-syn Eco 30度牙的一种螺纹22 ThreadForming TF自攻螺纹23 Self Tapping self tapp自切屑螺纹24 pin pin销25 shaft Shaf轴26 steel St铁27 stainless steel SS不锈钢28 Brass(Cu) Bras(Cu)铜29 Aluminum AL铝30 Rubber Rub橡胶31 machine screw mech scr机制螺丝32 SEM screw SEM Scr组合螺丝33 Material material材料34 Grade GD等级35 Finish Finish表面处理36 Point Point点37 Clamp Clam夹子38 internal Int内39 external ext外40 thickness /厚度41 length /xx42 hole /xx43 Metric Metcric公制44 DIN /德标45 ANSI /美标46 JIS /日标螺丝相关参数英语对照A: Machine Screw:机械螺丝B: Tapping Screw:自攻螺丝(分使用于金属与使用于塑料二种) B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. (塑料用,自攻螺丝)C: Wooden Screw :木工螺丝D: Drywall Screw :水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass:xxe. Bronze:青铜f. UNS C11000 Copper:锑铜Finish Code:外观处理规格Head Code:头部外型螺丝型号Drive Code:头部剖沟,特征型号Length Code:螺丝长度(mm)A-1: Thread Code:螺丝型号A-2: Length Code:螺丝长度:A-3: Drive Code/头部剖沟,特征.a. Slotted:一字( Minus )b. Phillips:十字( Plus )c. Phil-Slot:一字/十字d. Hex Scoket:xxe. One Way:单向(只可锁入,不可退出)A-4: Head Code/头部外型.a. Flat:平头(锁入后,顶部与工作件齐平)b. Oval:色拉头c. Round:圆头d. Pan:圆扁头e. Truss:大圆扁头f. Hex :六角头A-5: Finish Code/外观处理.a. Z: Zine-Plated:镀锌b. Ni: Ni-Plated:镀镍c. Tin-Plated:镀锡d. Zine Plated / Green Iridite:镀锌绿膜处理.e. Radiant Plated:镀五彩f. Passivate:抗氧化处理.g. Alodial Finish:无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement镀后去氢，防止氢脆Case carburization表面渗碳With across flats对边With across corners对角Radius of fillet:头下圆角Transition thread length过度螺纹Wrenching height扳拧高度Rockwell铬氏硬度Vickers维氏硬度Brinellxx氏硬度Metallography microscope金相显微镜Salt spray device盐雾试验箱Tensile testing machine拉力试验机Cold forming冷打Hot forging红镦P C 8 = property class 8机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawingxx：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter直径Lengthxx各类紧固件标准件产品xx对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力xx壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts) 圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角xx螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws 固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control BoltsxxBlind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine 气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater 空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod 马达轴承轴心组件Bearing Shaft(Motor) 轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind NutsxxBlind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds 其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动xx钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws 不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws。
紧固件标准件中英文对照
英文名称对应标准Square head bolts GB/T 8-88 C 级Flat countersunk square neck bolts GB/T 10-88 沉头沉带榫螺栓Flate countersunk nib bolts GB/T 11-88 (大)半圆头方颈螺栓Cup head square neck (with large head)bolt GB/T 14/15-88六角头铰制孔用螺栓Hexagon fit boltsGB/T 27-88 A 和B 级六角头螺杆带铰制孔用螺栓(细杆)Hexagon fit bolts with split pin hole on shank(Reduced shank) GB/T 28-88 A 和B 级十字槽凹穴六角头螺栓Cross recessed hexagon bolts with indentation GB/T 29.2-88 A 和B 级六角头头部带孔螺栓Hexagon bolts with wire holes on head GB/T 32.1-88 A 和B 级T 型槽用螺栓Bolt for T-slot GB/T 35.1-88 B 级加强半圆头方颈螺栓Strengthened cap head square neck bolts GB/T 794.1-93 活节螺栓Eye bolts GB/T798-88地角螺栓Eyelet bolts GB/T799-88头角头螺栓Hexagon head bolts GB/T5780-2000 C 级六角头法兰面螺栓Hexagon flange bolts GB/T5789-86 B 级外六角花法兰面螺栓Steel hexalobular head bolt with small flangeDIN 34801-9918.久美特Geomet 19.耐落Nylok 陆锈宝Rupst 20.翡丽雅特 ViridAct 21.美加力Magni 沉头方劲螺栓中文名称一.孔别三.常用名称1.螺丝类方头螺栓1.割沟Slotted2.十字穴 Phillips3.米字穴 Pozidriv(cross recess)4.十字割沟 Slotted phillips5.四角孔Square6.十字方孔 Square phillips7.六角孔hexagon8.方孔割沟Square slotted9.梅花穴Six-lobe 10.三角孔Triangle 11.Y 型槽Y-type 12.斜Y 槽Tri-wing 13.五等角5-Point 二,电镀1.电镀锌Zinc plated2.白皮Plain finished3.五彩Yellow zinc plated4.镀镍Nickel plated5.热浸锌Hot dip galvanized6.黑锌Black zinc plated7.镀黑Black finished8.染黑Black oxide9.(黑)磷酸盐(black)Phosphated 10.黄铜 Brass 11.镀青蓝Unichrome plated 12.古铜A.C Brontze 13.青古铜Antique brass 14.机械镀锌Mechanical galvanized 15.绿锌Green zinc plated 16.电锌腊Zinc plated&waxed 17.达克锈Dacrotizing plated英文名称对应标准双头螺柱bm=1d Double end studs-bm=1d GB/T 897-88等长双头螺柱 B 级Double end studs(clamping type)-product grade A GB/T 901-88螺杆Thread rods GB/T 15389-943.螺钉类英文名称对应标准开槽圆柱头螺钉Slotted cheese head screws GB/T65-2000开槽沉头螺钉Slotted countersunk flat head screws (common head style) GB/T68-2000 eqv ISO 2009-94开槽半沉头螺钉Countersunk slotted raised head screws(common head style)GB/T69-2000 eqv ISO 2010-94内六角圆柱头螺钉Hexagon socket head cap screws GB/T70.1-2000 eqv ISO 4762.2-97内六角平圆头螺钉Hexagon socket button head screws GB/T70.2-2000 eqv ISO 7380-97内六角沉头螺钉Hexagon socket countersunk head screws GB/T70.3-2000 eqv ISO 10642-97十字槽盘头螺钉Pan head screw with cross recess GB/T818-2000 eqv ISO 7045-94十字槽半沉头螺钉Countersunk raised head screws(common head style)with cross recess GB/T820-2000 eqv ISO 7047-94十字槽圆柱头螺钉Cheese head screws with cross recess GB/T822-2000 eqv ISO 7048-94滚花高头螺钉Knurled thumb screws GB 834-88滚花平头螺钉Knurled screws GB 835-88内六角花形盘头螺钉Hexagon lobular socket pan head scerws GB 2672-86内六角圆柱头轴肩螺钉Hexagon socket head shoulder scerws GB/T 5281-854.自攻螺钉 英文名称对应标准十字槽盘头盘自攻螺钉Cross recessed pan head tapping screws GB 845-85十字槽沉头盘自攻螺钉Cross recessed countersunk head tapping screws GB 846-85十字槽盘头盘自攻锁紧螺钉Cross recessed pan head thread forming screws GB 6560-86十字槽凹穴六角头自攻螺钉Cross recessed hexagon head tapping screws with indentationGB 9456-98十字槽自攻螺钉-刮削端(用于精密机械)cross recessed tapping screws-scrape point(fasters for fine mechanics)GB/T 13806-2墙板自攻螺钉Dry wall screws GB/T14210-93十字槽盘头自钻自攻螺钉Cross recessed pan head self-drilling tapping screws GB/T15856.1-95六角凸缘自攻螺钉Hexagon head tapping screws with collarGB/T16824.1-97 eqv ISO 7053-92中文名称中文名称中文名称英文名称对应标准方螺母-C 级Square nuts-product grade C GB/T39-88六角螺母-C 级Hexagon nuts-product grade C GB/T41-2000eqv ISO 4034-99六角厚螺母Hexagon thick nuts GB/T56-88六角薄螺母Hexagon thin nuts GB/T6172.1-2000eqvISO 4035-99蝶形螺母Wing nuts GB/T 62-88组合式盖形螺母Acorn nutsGB/T 802-88球面六角螺母Hexagon nut with raised face GB/T 804-88滚花高螺母kunrled nut with collarGB/T 806-881型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts(with non-metallic insert).style 1GB/T889.1-2000eqv 7040-97盖形螺母Acorn nutsGB/T 923-88六角薄螺母 无倒角Hexagon thin nuts (unchamfered)GB/T6174-2000eqvISO 4036-99六 角法兰面螺母Hexagon nuts with flangeGB/T6177.1-2000eqv ISO 4161-991型六角开槽螺母Hexagon slotted and castle nuts.style1GB/T 6178-86全金属六角锁紧螺母Prevailing torque type all-metal hexagon nuts GB/T 6184-2000eqv ISO 7719-97焊接方螺母square weld nut GB/T 13680-92焊接六角螺母Hexagon weld nuts GB/T 13681-92平头铆螺母Flat head riveted nuts GB/T 17880.1-996.挡圈 英文名称对应标准锥销锁紧挡圈Lock ring with corne pin GB/T 883-86轴肩挡圈Rings for shouderGB/T 891-86螺钉紧固轴端挡圈Lock rings at the end of shaft with screw GB/T 893.1-86孔用弹性挡圈-A 型Circlips for holes -typeA GB/T 894.1-86轴用弹性挡圈Circlips for shaft -typeA GB/T 895-2-86开口挡圈"E"ringsGB/T 896-86钢丝锁圈Round coire circlips GB/T 921-86夹紧挡圈Crip ringsGB/T 960-86中文名称中文名称英文名称对应标准弹簧垫圈(标准型)Single coil spring lock washers (normal type)GB/T 93-87平垫圈-C 级Plain washersGB/T 95-85eqv ISO 7091-2000大平垫圈Plain washers-large series GB/T 96-85 A 和B 级鞍形弹性垫圈Curved spring washers GB/T 860-87内齿锁紧垫圈Lock washers internal teethGB/T 861.1-87内锯齿锁紧垫圈Serrated lock washers internal teeth GB/T 861.2-87外锯齿锁紧垫圈Serrated lock washers external teeth GB/T 862.2-87波型弹性垫圈Wave spring washersGB/T 955-87锥形锁紧垫圈Countersunk external toothed look washersGB/T 956.1-87锥形锯齿锁紧垫圈Countersunk serrated external toothed lock washers GB/T 956.2-878.销英文名称对应标准开口销Split pins GB/T 91-2000eqvISO1234-97圆锥销Taper pinsGB/T 117-2000eqvISO2339-86螺纹圆柱销Paraller pins with external thread GB/T 878-86销轴Clevis pins with head GB/T 882-86平头铆钉Flat head rivetsGB/T 109-86平锥头铆钉（粗制）Cone-head rivets-black GB/T 864-86空心铆钉Tubular rivetsGB/T 876-86封闭型扁圆头抽芯铆钉Mushroom head break mandred closed end blind rivets GB/T 12615-90开口型沉头抽芯铆钉120 deg flush head break mandrel blind rivetsGB/T 12617-90中文名称中文名称9.紧固件-组合件和连接副英文名称对应标准中文名称钢结构用高强度大六角头螺栓High strength bolts with large hexagon head for steel structures GB/T1230-91钢结构用高强度大六角头螺母High strength large hexagon nuts for steel stuctures GB/T1229-91钢结构用高强度大六角头垫圈High strength plain washers for steel structures GB/T1230-91钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures GB/T3632-95十字槽盘头螺钉,弹簧垫圈和平垫圈组合件Cross recessed pan head screw ,single coil spring lock washer and plain washer assemblies GB/T 9074-.4-88无头焊钉Headless for stud welding GB/T 10432-89圆柱头焊钉Cheese head studs for stud welding GB/T 10433-89机械焊接螺钉Weld screws with metric thread DIN 34817-2001。
紧固件中英文对照大全
紧固件中英文对照大全-------------------------------------------------------------------------------- 螺栓－－方头螺栓 C级 UDC 621.882.6 | GB 8-88 | 代替 GB8-76 Square head bolts-Product grade C－－沉头方颈螺栓 UDC 621.882.6 | GB 10-88 | 代替 GB10-76 Flat countersunk square neck bolts－－沉头带榫螺拴 UDC 621.882.6 | GB 11-88 | 代替 GB11-76 Flat countersunk nib bolts－－半圆头方颈螺栓 UDC 621.882.6 | GB 12-88 | 代替 GB12-76 Cup head square neck bolts－－半圆头带榫螺栓 UDC 621.882.6 | GB 13-88 | 代替 GB13-76 Cup head nid bolts－－大半圆头方颈螺栓 C级 ISO 8677:1986 | GB 14-1998 | 代替 GB14-88 Cup head square neck bolts with large head-Product grade C－－大半圆头带榫螺栓 UDC 621.882.6 | GB 15-88 | 代替 GB15-76 Cup head nib bolts with large head－－六角头铰制孔用螺栓 UDC 621.882.6 | GB 27-88 | 代替 GB27-76 Hexagon fit bolts-product grade A and B－－六角头螺杆带孔铰制孔用螺栓 UDC 621.882.6 | GB 28-88 | 代替 GB28-76 Hexagon fit bolts with split pin hole on shank-product grade A and B－－六角头头部带槽螺栓 A 和 B 级 UDC 621.882.6 | GB 29.1-88 | 代替 GB29-76 Hexagon bolts with slot on head -product A and B－－十字槽凹穴六角头螺栓 UDC 621.882.6 | GB 29.2-88 | 代替 GB29-76 Cross recessed hexagon bolts with indentation－－六角头螺杆带孔螺栓 UDC 621.882.6 | GB 31.1-88 | 代替 GB31、23、24-76 Hexagon bolts with split pin hole on shank-product grade A and B－－六角头螺杆带孔螺栓细杆 B级 UDC 621.882.6 | GB 31.2-88 | 代替 GB31、23、24-76 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B－－六角头螺杆带孔螺栓细牙 A和B级 UDC 621.882.6 | GB 31.3-88 | 代替 GB31、23、24-76Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B －－六角头头部带孔螺栓 A 和 B级 UDC 621.882.6 | GB 32.1-88 | 代替GB32、25、26-76 Hexagon bolts with wire holes on head-product grade A and B－－六角头头部带孔螺栓细杆 B级 UDC 621.882.6 | GB 32.2-88 | 代替 GB32、25、26-76 Hexagon bolts with wire holes on head-Reduced shank-product grade B－－六角头头部带孔螺栓细牙 A 和 B 级 UDC 621.882.6 | GB 32.3-88 | 代替GB32、25、26-76Hexagon bolts with wire holes on head-Fine pitch thread-product grade Aand B －－下方头螺栓 B级 UDC 621.882.6 | GB 35-88 | 代替 GB35-76 Square head bolts with small head-praduct grade B－－T 形槽用螺栓 UDC 621.882.6 | GB 37-88 | 代替 GB37-76 Bolts for T-Slot－－加强半圆头方颈螺栓 GB /T794-93 | 代替 GB794-671Strengthened cup head square neck bolts－－活节螺栓 UDC 621.882.6 | GB 798-88 | 代替 GB798-76 Eye bolts－－地脚螺栓 UDC 621.882.6 | GB 799-88 | 代替 GB799-76 Eyelet bolts－－沉头双榫螺 UDC 621.882.6 | GB 800-88 | 代替 GB800-77 Flat countersunk double nib bolts－－小圆半头低方颈螺栓 B级 ISO 8678:1988 | GB /T 801-1998 | 代替 GB801-88 Cup head square neck bolts with small head and short neck-product grade B－－六角头螺栓 C级 ISO 4016:1999 | GB /T 5780-2000 | 代替 GB/T 5780-1986 Hexagon head bolts-product grade C－－六角头螺栓全螺纹 C级 ISO 4018:1999 | GB /T 5781-2000 | 代替 GB/T5781-1986 Hexagon head bolts-Full thread-product grade C－－六角头螺栓 ISO 4014：1999 | GB /T 5782-2000 | 代替 GB/T 5782-1986 Hexagon head bolts－－六角头螺栓全螺纹 ISO 4017：1999 | GB /T 5783-2000 | 代替 GB/T 5783-1986 Hexagon head bolts-Full thread－－六角头螺栓-细杆-B级 UDC 621.882.6 | GB 5784-86 | 代替 GB30、21-76 Hexagon head bolts-Reduced shank -Product grade B－－六角头螺栓细牙 ISO 8765：1999 | GB /T 5785-2000 | 代替 GB/T 5785-1986 Hexagon head bolts with fine pitch thread－－六角头螺栓细牙全螺纹 ISO 8676：1999 | GB /T 5786-2000 | 代替 GB/T 5786-1986 Hexagon head bolts with fine pitch thread-Full thread－－六角法兰面螺栓-加大系列-B级 UDC 621.882.6 | GB 5789-86 | Hexagon flange bolts-Heavy series-product grade B－－六角法兰面螺栓-加大系列-细杆-B级 UDC 621.882.6 | GB 5790-86 | Hexagon flange bolts-Heavy series-product grade B－－六角法兰面螺栓小系列 ISO 4162：1990 | GB /T 16674-1996 | 代替 GB/T 5787、5788-1986Hexagon flange bolts-Small series－－钢网架螺栓球节点用高强度螺栓 GB /T 16939-1997 | High strength bolts for joints of space grid structures 螺柱－－双头螺柱 bm=1d UDC 621.882 | GB 897-88 | 代替 GB897-76 Double end studs-bm=1d－－双头螺柱 bm=1.25d UDC 621.882 | GB 898-88 | 代替 GB898-76 Double end studs-bm=1.25d－－双头螺柱 bm=1.5d UDC 621.882 | GB 899-88 | 代替 GB899-76 Double end studs-bm=1.5d－－双头螺柱 bm=2d UDC 621.882 | GB 900-88 | 代替 GB900-76 Double end studs--bm=2d－－等长双头螺柱 B级 UDC 621.882 | GB 901-88 | 代替 GB901-762Double end studs(clamping type) -Product grade B－－手工焊用焊接螺柱 GB 902.1-89 | 代替 GB902-76 Weld studs for manualwelding－－机动弧焊用焊接螺柱 GB 902.2-89 | 代替 GB902-76 Weld studs for arcwelding－－储能焊用焊接螺柱 GB 902.3-89 | 代替 GB902-76 Weld studs for capacitor discharge welding－－等长双头螺柱 C级 UDC 621.882 | GB 953-88 | 代替 GB953-76 Double endstuds(clamping type)-product grade C －－螺杆 GB /T 15389-94 | Threaded rods 螺母－－方螺母 C级 UDC 621.882.3 | GB 39-88 | 代替 GB39-76 Square nuts-product grade C－－六角螺母 C级 ISO 4034：1999 | GB /T41-2000 | 代替 GB/T 41-1986 Hexagon nuts-product grade C－－六角厚螺母 ISO 621.882.3 | GB 56-88 | 代替 GB56-76 Hexagon thick nuts－－蝶形螺母 UDC 621.882.3 | GB 62-88 | 代替 GB62-76 Wing nuts－－环形螺母 UDC 621.882.3 | GB 63-88 | 代替 GB63-76 Lifting nuts－－组合式盖形螺母 UDC 621.882.3 | GB 802-88 | 代替 GB802-76 Acorn nuts－－球面六角螺母 UDC 621.882.3 | GB 804-88 | 代替 GB804-76 Hexagon nutswith raised face－－扣紧螺母 UDC 621.882.3 | GB 805-88 | 代替 GB805-76 Tight nuts－－滚花高螺母 UDC 621.882.3 | GB 806-88 | 代替 GB806-76 Knurled nut with collar－－滚花薄螺母 UDC 621.882.3 | GB 807-88 | 代替 GB807-76 Knurled nuts－－小六角特扁细牙螺母 UDC 621.882.3 | GB 808-88 | 代替 GB808-76 Small hexagon thin nuts-Fine pitch thread－－嵌装圆螺母 UDC 621.882.3 | GB 809-88 | 代替 GB809-76 Lnsert round nuts－－小圆螺母 UDC 621.882.3 | GB 810-88 | 代替 GB810-76 Small round nuts－－圆螺母 UDC 621.882.3 | GB 812-88 | 代替 GB812-76 Round nuts－－端面带孔圆螺母 UDC 621.882.3 | GB 815-88 | 代替 GB815-76 Round nuts with drilled holes in one face3－－侧面带孔圆螺母 UDC 621.882.3 | GB 816-88 | 代替 GB816-79 Round nuts with set pin holes in side－－带槽圆螺母 UDC 621.882.3 | GB 817-88 | 代替 GB817-76 Slotted round nuts－－1型非金属嵌件六角锁紧螺母 ISO 7040：1997 | GB /T 889.1-2000 | 代替GB/T 889-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 1－－1型非金属嵌件六角锁紧螺母细牙 ISO 10512：1997 | GB /T 889.2-2000 |Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread －－盖形螺母 UDC 621.882.3 | GB 923-88 | 代替 GB923-76 Acorn nuts－－1型六角螺母 ISO 4032：1999 | GB /T 6170-2000 | 代替 GB/T 6170-1986 Hexagon nuts,style 1－－1型六角螺母细牙 ISO 8673：1999 | GB /T 6171-2000 | 代替 GB/T 6171-1986 Hexagon nuts,style 1,with fine pitch thread－－六角薄螺母 ISO 4035：1999 | GB /T 6172.1-2000 | 代替 GB/T 6172-1986 Hexagon thin nuts(chamfered)－－非金属嵌件六角锁紧薄螺母 ISO 10511：1997 | GB /T 6072.2-2000 | Prevailing torque type hexagon thin nuts(with non-metallic insert)－－六角薄螺母细牙 ISO 8675：1999 | GB /T 6173-2000 | 代替 GB/T 6173-1986 Hexagon thin nuts(chamfered) with fine pitch thread－－六角薄螺母无倒角 ISO 4036：1999 | GB /T 6174-2000 | 代替 GB/T 6174-1986 Hexagon thin nuts(unchamfered)－－2型六角螺母 ISO 4033：1999 | GB /T 6175-2000 | 代替 GB/T 6175-1986 Hexagon nuts,style 2－－2型六角螺母细牙 ISO 8674：1999 | GB /T 6176-2000 | 代替 GB/T 6176-1986 Hexagon nuts,style 2,with fine pitch thread－－六角法兰面螺母 ISO 4161：1999 | GB /T 6177.1-2000 | 代替 GB/T 6177-1986 Hexagon nuts with flange－－六角法兰面螺母细牙 ISO 10663：1999 | GB /T 6177.2-2000 | Hexagonnuts with flange-fine pitch thread－－1型六角开槽螺母-A和B级 UDC 621.882.3 | GB 6178-86 | 代替 GB57~58-76 Hexagon slotted and castle nuts,style 1 -product grades A and B－－1型六角开槽螺母-C级 UDC 621.882.3 | GB 6179-86 | 代替 GB57~58-76 Hexagon slotted nuts,style 1 -product grade C－－2型六角开槽螺母-A和B级 UDC 621.882.3 | GB 6180-86 | Hexagon slotted and castle nuts,style 2 -Product grades A and B－－六角开槽薄螺母-A和B级 UDC 621.882.3 | GB 6181-86 | 代替 GB59~60-76 Hexagon thin slotted nuts-Product grades A and B－－2型非金属嵌件六角锁紧螺母 ISO 7041：1997 | GB /T 6182-2000 | 代替 GB/T 6182-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 2－－非金属嵌件六角法兰面锁紧螺母 ISO 7043：1997 | GB /T 6183.1-2000 | 代替GB/T 6183-19864Prevailing torque type hexagon nuts with flange(with non-metallic insert)－－非金属嵌件六角法兰面锁紧螺母细牙 ISO 12125：1997 | GB /T 6183.2-2000 |Prevailing torque type hexagon nuts with flange(with non-metallicinsert)with fine pitch thread －－1型全金属六角锁紧螺母 ISO 7719：1997 | GB /T 6184-2000 | 代替 GB/T 6184-1986 Prevailing torque type all-metal hexagon nuts,style 1－－2型全金属六角锁紧螺母 ISO 7042：1997 | GB /T 6185.1-2000 | 代替 GB/T 6185-1986 Prevailing torque type all-metal hexagon nuts,style 2－－2型全金属六角锁紧螺母细牙 ISO 10513：1997 | GB /T 6185.2-2000 | Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread－－2型全金属六角锁紧螺母 9级 ISO 7720：1997 | GB /T 6186-2000 | 代替GB/T 6186-1986Prevailing torque type all-metal hexagon nuts,style 2-Property class 9－－全金属六角法兰面锁紧螺母 ISO 7044：1997 | GB /T 6187.1-2000 | 代替GB/T 6187-1986Prevailing torque type all-metal hexagon nuts with flange－－全金属六角法兰面锁紧螺母细牙 ISO 12126：1997 | GB /T 6187.2-2000 | Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread－－1型六角开槽螺母细牙 A和B级 UDC 621.882.3 | GB 9457-88 | 代替 GB57、58-76 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B －－2型六角开槽螺母细牙 A和B级 UDC 621.882.3 | GB 9458-88 |Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B－－六角开槽薄螺母细牙 A和B级 UDC 621.882.3 | GB 9459-88 | 代替 GB59、60-76 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B －－焊接方螺母 GB /T 13680-92 | Square weld nuts－－焊接六角螺母 GB /T 13681-92 | Hexagon weld nuts－－平头铆螺母 GB /T 17880.1-1999 | Flat head riveted nuts－－沉头铆螺母 GB /T 17880.2-1999 | Countersunk head riveted nuts－－小沉头铆螺母 GB /T 17880.3-1999 | Small countersunk head riveted nuts－－120°小沉头铆螺母 GB /T 17880.4-1999 | 120°Small countersunk head riveted nuts－－平头六角铆螺母 GB /T 17880.5-1999 | Flat head hexagon riveted nuts－－精密机械用六角螺母 ISO 4166：1979 | GB /T 18195-2000 | Hexagon nuts for fine mechanics 螺钉－－开槽圆柱头螺钉 ISO 1207：1992 | GB /T 65-2000 | 代替 GB/T 65-1985 Slotted cheese head screws5感谢您的阅读，祝您生活愉快。
紧固件中英文对照
紧固件中英文对照[转]以下中英文对照可作为外销定单时的参考：六角螺絲(栓) HEX HEAD CAP SCREWS(HEX BOLTS)六角機械螺絲HEX HEAD MACHINE BOLTS六角木牙螺絲HEX LAG BOLTS四角螺絲SQUARE HEAD BOLTST頭螺絲T HEAD BOLTS馬車螺絲CARRIAGE BOLTS環首螺絲EYE BOLTS內六角孔螺絲HEX SOCKET CAP SCREWS固定螺絲SET SCREWS螺椿栓STUD BOLTS螺旋椿SCREW STUDS輪殼螺栓WHEEL BOLTS翼形螺絲WING SCREWS自攻螺絲SELF T APPING SCREWS自削螺絲THREAD CUTTING SCREWS鑽尾螺絲SELF DRILLING SCREWS旋入螺絲DRIVE SCREWS機械螺絲MACHINE SCREWS木螺絲WOOD SCREWS家具螺絲FURNITURE SCREWS塑板螺絲CHIPBOARD SCREWS牆用螺絲DRYWALL SCREWS基礎螺栓FOUNDATION BOLTSU型螺栓U BOLTS勾頭螺栓HOOK BOLTS套掛螺絲TOGGLE BOLTS突緣螺絲FLANGE BOLTS軌道螺栓(魚尾螺絲) TRACK BOLTS耐候鋼螺絲CORTEN STEEL HEAVY HEX BOLTS扭矩控制螺栓T.C.BOLTS高張力螺栓HIGH STRENGTH BOLTS剪力釘(焊接螺絲) WELDING STUDS螺絲附華司組合SCREWS AND WASHERS ASSEMBLED(SEMS) 大尺寸螺栓BIG SIZE BOLTS不鏽鋼小螺絲ST AINLESS STEEL SHEET MET AL SCREWS不鏽鋼大螺絲ST AINLESS STEEL BOLTS銅螺絲BRASS SCREWS鋁螺絲ALUMINUM SCREWS合金鋼螺絲ALLOY STEEL SCREWS電子螺絲ELECTRONIC SCREWS微小精密螺絲MICRO SCREWS塑膠螺絲PLASTIC SCREWS復合材料用螺絲PARTICLE BOARD SCREWS鈦合金螺絲TIT ANIUM ALLOY BOLTS鈦、鋯、鉬、鈮等螺絲、零件、材料TI,ZR,MO,NB PARE MET AL BOLTS PARTS拇指螺絲THUMB SCREWS雙頭牙螺絲DOUBLE END SCREWS HANGER BOLT車輛(汽車)螺絲、螺帽AUTOMOTIVE FASTENERS航太用螺絲AEROSPACE FASTENERS飛機特殊扣件SOURCE CONTROL BOLTS拉栓BLIND BOLTS面板螺絲PANEL FASTENERS電梯螺絲ELEVATOR BOLTS四角頭固定螺絲SQUARE SET SCREWS大頭馬車螺絲STEP BOLTS單向螺絲ONE WAY LAG SCREWS管夾螺絲HOSE CLAMP SCREWS不鏽鋼固定螺絲ST AINLESS STEEL HEX SOCKET CAP SCREWS不鏽鋼內六角螺絲ST AINLESS STEEL HEX SOCKET CAP SCREWS鉸鏈螺絲HINGE SCREWS貨櫃螺絲CONT AINER SCREWS復合材料鑽尾螺絲BI-MET AL SELF DRILLING SCREWS三角牙螺絲TRILOBULAR THREAD SCREWS高低牙螺絲HIGH LOW SCREWS夾板用螺絲PARTICLE BOARD SCREWS馬桶螺絲TOILET CLOSET BOLTS特長螺絲SPECIAL LONGER SCREWS建業螺絲BUILDING FASTENERS不鏽鋼六角螺絲ST AINLESS STEEL HEX SOCKET CAP SCREWS其它特殊螺絲SPECIAL SCREWS OR BOLTS不鏽鋼特殊螺絲SPECIAL ST AINLESS STEEL SCREWS寬牙螺絲（粗牙螺絲）COARSE THREAD SCREWS鏈帶螺絲COLLATED SCREWS水泥螺絲CONCRETE SCREWS板模螺絲CONSTRUCTION BOLTS鋅蝶螺絲DIE CAST WING SCREWS; ZINC ALLOY重型車螺絲HEAVY DUTY WHEEL HUB BOLTS內六角固定螺絲HEX SOCKET SET SCREWS復合材料用螺絲（夾板用）PARTICLE BOARD SCREWS犁壁螺絲PLOW BOLTS機(踏)車用螺絲、軸心SCREWS AND SHAFTS FOR MOTORCYCLE OR BICYCLE 針車用螺絲、軸心SCREWS AND SHAFTS FOR SEWING MACHING止付螺絲SOCKET SET SCREWS不鏽鋼寬牙螺絲ST AINLESS STEEL COARSE THREAD SCREWS不鏽鋼高低牙螺絲ST AINLESS STEEL HIGH-LOW THREAD SCREWS不鏽鋼機械螺絲ST AINLESS STEEL MACHINE SCREWS不鏽鋼鑽尾螺絲ST AINLESS STEEL SELF DRILLING SCREWS不鏽鋼自攻螺絲ST AINLESS STEEL SELF T APPING SCREWS不銹鋼自削螺絲ST AINLESS STEEL THREAD CUTTING SCREWS不鏽鋼三角牙螺絲ST AINLESS STEEL TRI-LOBULAR THREAD SCREWS 不鏽鋼木螺絲ST AINLESS STEEL WOOD SCREWS套掛螺栓及螺絲TOGGLE BOLTS鈦合金膨脹螺絲TIT ANIUM ALLOY EX PANSION BOLTS六角蓋頭螺帽HEX CAP NUTS六角鋸齒螺帽HEX SERRATED NUTS六角輪緣螺帽HEX FLANGE NUTS高腳螺帽HEX COUPLING NUTS(HIGH NUTS)圓螺帽ROUND NUTS四角螺帽SQUARE NUTS管用螺帽PIPE NUTS輪殼螺帽WHEEL NUTS蝶型螺帽WING NUTSU形螺帽U NUTST形螺帽T NUTS環首螺帽EYE NUTS齒形螺帽KEP NUTS齒花螺帽CLINCH NUTS耐候鋼六角重型螺帽CORTEN STEEL HEAVY HEX NUTS焊接螺帽WELD NUTS高張力螺帽HEIGH STRENGTH NUTS建業用螺帽STRUCTURAL NUTS不鏽鋼螺帽ST AINLESS STEEL NUTS銅螺帽BRASS NUTS鋁螺帽ALUMINUM NUTS合金鋼螺帽ALLOY STEEL NUTS重型車螺帽HEAVY DUTY WHEEL HUB NUTS鐵器焊接袋帽ACORN CAP NUTS金屬預置扭矩式螺帽ALL-MET AL PREVAILING TORQUE TYPE NUTS壁虎螺帽ANCHOR NUTS大尺寸螺帽BIG SIZE NUTS鐵蓋袋帽CLOSED END ACORN NUTS盤形華司螺帽CONICAL WASHER NUTS鐵蓋+尼龍圈組合蓋帽DIN 986 DOMED CAP NUTS突緣尼龍蓋帽FLANGE NYLON INSERT LOCK NUTS平面華司螺帽FLAT WASER NUTS六角割溝螺帽HEX SLOTTED NUT自鎖螺帽SELF-LOCKING NUTS制止螺帽SLIDING NUTSSLN-自動防鬆螺帽SLN SELF-LOCKING NUTS其它特殊螺帽SPECIAL NUTS彈簧螺帽SPRING NUTS不鏽鋼突緣螺帽ST AINLESS STEEL FLANGE NUTS不鏽鋼六角輪緣尼龍螺帽ST AINLESS STEEL FLANGE NYLON INSERT LOCK NUTS 不鏽鋼六角重型螺帽ST AINLESS STEEL HEAVY HEX NUTS不鏽鋼六角螺帽ST AINLESS STEEL HEX NUTS不鏽鋼尼龍嵌入螺帽ST AINLESS STEEL NYLON INSERT LOCK NUTS鋅壓屬螺帽ZINC DIE CASTING NUTS普通六角螺帽HEX NUTS六角重型螺帽HEAVY HEX NUTS薄型螺帽HEX JAM NUTS尼龍嵌入防鬆螺帽NYLON INSERT LOCK NUTS機械螺絲用六角螺帽HEX MACHINE SCREW NUT合金鋼線材盤元ALLOY STEEL WIRE ROD球狀化線材ANNEALING WIRE AND ROD黑鐵絲BLACK WIRE黃銅棒線BRASS WIRE AND ROD磨光棒鋼BRIGHT STEEL BAR(HEX/ROUND/SQUARE)銅合金線COPPER ALLOY WIRE線切割線 E.D.M CUTTING WIRE快削鋼線材盤元FREE CUTTING STEEL WIRE ROD線材IRON OR STEEL WIRE線材盤元IRON OR STEEL WIRE ROD洋白銅線NICKEL SILVER WIRE磷青銅線PHOSPHATE BRONZE WIRE不鏽鋼條棒ST AINLESS STEEL BAR(ROUND/HEX/SQUARE)不鏽鋼冷鍛線材ST AINLESS STEEL COLD HEADING WIRE不鏽鋼線(抽線後) ST AINLESS STEEL DRAW WIRE不鏽鋼線材ST AINLESS STEEL WIRE不鏽鋼線材及盤元ST AINLESS STEEL WIRE AND ROD棒鋼STEEL BAR(HEX/ROUND/SQUARE)轉回90度碾線頭機90訌EVOLVING WIRE TWISTING MACHINE氣動拉釘機AIR RIVETER各式螺絲類產品自動包裝AUTOMATIC PACKAGING FOR ALL KINDS OF PACKAGING 自動包裝機AUTOMATIC PACKING MACHINE螺絲製造搓牙機械AUTOMATIC THREAD ROLLING MACHINE螺絲割尾加工機械AUTOMATIC THREAD SLOTTING MACHINE螺絲製造成型機械AUTOMATIC TRIMMING MACHINE拉釘打頭機BLIND RIVET HEADING MACHINE螺絲、螺帽成型機BOLT FORMERS,NUTS FORMERS,HEADERS螺絲、螺帽熱處理BOLT NUT AND SCREWS HEAT TREATMENT螺絲、螺帽熱處理爐BOLT NUT AND SCREWS HEAT TREATMENT FURNACES球狀化電器燉爐CARBURIZING FURNACE VACUUM AND BELL TYPE FURNACE超防銹復合瓷膜CERAMIC COATING連續式光輝滲碳淬火爐CONTINUOUS BRIGHT CARBURIZING QUENCHING F URNACE連續式光輝?#123;質淬火爐CONTINUOUS BRIGHT HARDENING QUENCHING FURNACE 中、高熱鍍鋅光輝連續爐CONTINUOUS BRIGHT HEAT TREAT FURNACE連續式光輝熱處理爐CONTINUOUS TYPE BRIGHT HEAT TREATMENT FURNACE螺絲割尾及特殊割遘加工MACHINE SCREW SHANK SLOTTING螺絲鑽孔加工SCREW SHANK DRILLING雞眼上下模EYELETS DIES一般線材、盤元、退火爐GENERAL WIRE,WIRE ROD,ANNEALING FURNACE倒立式滑落型伸線機HANDST AND TYPE WIRE DRAWING MACHINE十字沖模HEADER PUNCHES IN VARIOUS DRIVES成型沖模HEADER PUNCHES IN VARIOUS DRIVES螺絲打頭機HEADING MACHINE螺絲製造高速搓牙機械HIGH SPEED AUTOMATIC THREAD ROLLING MACHINE高中低周波感應加熱爐HIGH,MEDIUM,LOW FREQUENCY INDUCTION HEATER空心打頭機HOLLOW HEADING MACHINE熱浸鍍鋅螺絲、螺帽HOT DIP GALVANIZING BOLTS AND NUTS機械鍍鋅MECHANICAL GALVANIZED迷你成型機MINI-FORMERS成品自動收線機NON-STOP COILER精抽自動收線機NON-STOP COILER(SKINPASS)螺帽模NUT FORMING DIES螺帽成型模NUTS FORMERS特殊零件成型機PARTS FORMING MACHING沖模PUNCH DIES沖子PUNCH PINS羅拉成型機ROLLERS FORMERS機(踏)車用螺絲成型機SCREW FOR MOTORCYCLE OR BICYCLE HEADING MACHINE止付螺絲成型機SET SCREWS FORMERS套高成型機SOCKETS FORMERS一般線材、盤元、螺絲合金燉爐SPHEROIDIZING BRIGHT ANNEALING FURNACE球狀化熱處理爐SPHEROIDIZING HEAT TREATMENT FURNACE攻牙機T APPING MACHINE螺絲攻、車刀、模具T APS DIES AND TOOLS搓牙機鐵屑分離裝置THREAD CHIP SEPARATOR滾牙輪THREAD ROLLING DIES牙板THREAD ROLLING DIES PLATES精密油壓滾牙機HYDRAULIC THREAD ROLLING MACHINES模具TOOLS六角整頭模TRIMMING DIES HEXAGAN碳化鎢模具TUNGSTEN CARBIDE DIE鍍鈦處理(TiN)專業加工服務TiN HARD COATING FOR CUTTING TOOLS AND PUNCH BYPVD電鍍化學原料VARIOUS ELECTROPLATING CHEMICALS環規校正CALIBRATION FOR RING GAGE環規、牙規、三線規校正CALIBRATION FOR RING GAGE, ATHREAD GAGE, 3 WIRE GAGE 螺絲、螺帽品檢量測儀器FASTENERS INSPECTION AND MEASUREMENT INSTRUMENTS 螺絲、螺帽成型攻牙專用油FORMING AND T APPING OILS FOR BOLTS AND NUTS FORMERS螺絲、螺帽五金等檢驗INSPTECTION SERVICES FOR FASTENERS AND HARDWARE ISO品質保證系統ISO QUALITY ASSURANCE SYSTEM生產管理系統PRODUCTION CONTROL SYSTEM。
紧固件中英文对照
Description in Chinese 英文品名Desciption in English圆锥销Taper pins圆柱销Parallel pins开槽圆柱头螺钉Slotted cheese head screws开槽盘头螺钉Slotted pan head screws单耳止动垫圈Tab washers开口销Split cooter pins开槽半沉头木螺钉Slotted raised csk head wood screws 开槽半圆头木螺钉Slotted round head wood screws开槽沉头木螺钉Slotted countersunk head wood screws 平垫Plain washers平垫（带倒角）Mediun washers平垫Plain washers重型弹垫Spring lock washers,tang ends标准弹垫Spring lock washers,square ends鞍形弹垫Single coil spring lock washers弹簧止动垫圈Curved spring washers波形弹垫Wave spring washersT型方颈螺栓T-head blots with square neckT型双接头螺栓T-head bolts with double nip螺纹圆锥销Taper pins with threaded endT型头螺栓T-head bolts蝶型螺母（美制）Wing nuts America form蝶型螺母（德制）Wing nuts germany form蝶型螺母（美制）Wing screws America form蝶型螺母（德制）Wing screws germany form圆球型盖型螺母Ball knobs开槽带孔球面圆柱头蚴钉Slotted capstan screws开槽长圆柱端紧定螺钉Slotted set srews with full dog point开槽平端紧定螺钉（半牙）Slotted set srews with chamfered end 小六角特薄细牙螺母Pip nuts with thread外舌止动垫圈External tap小垫圈(用于圆柱头螺钉) Washers for cheese head screws方斜垫圈（U型）Square taper washers forU-section方斜垫圈（I型）Square taper washers forI-sections方垫圈Square washers开槽凹端紧定螺钉Slotted set with cup point六角薄螺母Hexagon thin nuts细牙六角薄螺母Hexagon thin nuts木螺钉专用垫圈Rounds washers for wood constructions 密封帽Sealing caps,push-in type活节螺栓B型Eye bolts form B内舌止动垫圈Internal tab washers双耳止动垫圈Washers with two taps滚花高头螺钉Knurled thumb screws with collar开槽滚花高头螺钉Slotted knurled thumb screws with collar 滚花高螺母Knurled thumb nuts with collar滚花薄螺母Knurled thumb thin nuts锁紧垫圈Sealing washers轴用弹性垫圈Retaining rings for shafts(external),circlips 孔用弹性垫圈Retaining rings for bores(internal),circlips方头带垫螺栓Square head bolts with collar方头圆柱底端螺栓Square head bolts with half dog point 方头带垫关圆底端螺栓Square head bolts with collar,half dog pointT型槽螺母T-slot nuts单头螺柱Single end studs地脚螺栓Masonry bolts带槽圆螺母Slotted round nuts端面带孔圆螺母Round nuts with drilled holes in one face 开槽平端紧定螺钉Slotted set screws with flat point开槽锥端紧定螺钉Slotted set screws with cone point六角螺母Hexagon nuts方螺母-C Square nuts六角头螺钉Hexagon screws六角头圆柱端紧定螺钉Hexagon set screws with full dog point薄型方螺母-B Square nuts without bevel(pressed nuts)六角头木螺钉Hexgon head wood screw(coach screws)吊环螺钉Lifting eye bolts吊环螺母Lifting eye nuts圆锥型槽销Grooved pins,taper grooved圆锥型槽销（半槽）Grooved pins,taper grooved half length平行槽销（带倒角）Grooved pins,parallel grooved full length前端凹槽槽销Grooved pins,reverve grooved half length中部凹槽槽销Grooved pins,center grooved圆头槽销Grooved pins with round head沉头槽销Grooved pins with countersunk head六角螺母棒Turnuckles(center parts),made out of hexagon bar花蓝螺栓Turnuckles with eye bolt and hook bolt弹性圆柱销Spring pins,heavy type组合式盖型螺母Hexagon domed cap nuts开槽圆螺母(配合沟头扳手) Slotted round nuts for hook spammer圆螺母（带插销孔）Round nuts with set holes盘型弹簧垫圈Disc springs喉箍Hose clamps润滑油嘴（旋扭头）Lubricating nipples,button head管夹Shackles for conduiltsU型螺栓Stirrup bolts(U-bolts)球面垫圈Spherical washers,conical seats圆柱销Parallel pins厚六角螺母Hexagon nuts,1.5d厚六角法兰面螺母Hexagon nuts,1.5d with collar长六角螺母Hexagon nuts,3d外齿锁紧垫圈External teeth lock washers内齿锁紧垫圈Internal teeth lock washers外锯齿锁紧垫圈External teeth serrated lock washers内锯齿锁紧垫圈Internal teeth serrated lock washers开口挡圈Retaining rings for shafts(E-rings),circlips平键（A型）Parallel keys(form A)半圆键Woodruff keys嵌环（支撑环）Thimbles机器螺钉和垫圈组合件Screws and washers assemblies自攻螺钉和垫圈组合件Tapping screws and washer assemblies薄型带孔内六角圆柱螺钉Hexagon cocket head cap screws with hole,low head大六角头螺栓Hexagon head bolts with large head(friction grip nolts)大六角螺母Hexagon nuts with large wideth across flat(friction grip nuts)大垫圈Round washers for friction grip bolts楔型方垫圈Spuare taper washers for friction grip bolts on T-六角法兰面螺母Hexagon flange nuts全金属六角锁紧螺母（2型）Prevailing torque type hexagon nuts,all metallic nuts 轻型弹性圆柱销Spring pins,light type重型弹性圆柱销用垫圈Washers for bolts with heavy type spring pinssISO公制螺纹螺钉（多种头型）Thread forming screws for ISO-metric thread 自攻自钻螺钉（多种头型）Self-drilling tapping screws开槽切削螺纹螺钉（多种头型）Thread cutting screws十字槽切削螺纹螺钉（多种头型）Thread cutting screws cross recessT型四爪螺母Tee nuts with pronge钢结构用六角头螺栓连接副Hexagon head fitted bolts for steel structures开槽盘头自攻螺钉Pan head tapping screws with slot开槽沉头自攻螺钉countersunk flat head tapping screws with slot开槽半沉头自攻螺钉Raised sountersunk oval head tapping screws with slot六角头自攻螺钉Hexagon tapping screws圆柱头螺钉用弹簧垫圈Spring lock washers for screws with cylindrical heads十字槽盘头自攻螺攻Pan head tapping screws with cross recessed十字槽沉头自攻螺攻Countersunk flat head tapping screws with cross recessed十字槽半沉头自攻螺攻Raised countersunk oval head tapping screws with cross薄型内六角圆柱头螺钉Hexagon socket head cap screws with,reduced head十字槽盘头螺钉Pan head screws with cross recessed钢结构用垫圈Washers for steel structures钢结构用六角头螺栓Hexagon head bolts for steel structures内六角沉头螺钉Hexagon socket coutersunk head screws轴用钢丝挡圈Roundwire snap rings for shafts十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws十字槽圆头木螺钉Cross recessed round head wood screws十字槽沉头木螺钉Cross recessed countersunk head wood screws螺纹护套(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking大外径垫圈Washers,outside diameter appro.3d弹簧卡子sping cotter for a bolt平板螺栓Belting bolts(elevator bolts)干壁钉（墙板钉）Dry wall screws环型螺母Lifting nuts(eye nuts)圆螺母用止退垫圈Tab washer for slotted round nuts。
紧固件中英文对照
紧固件中英文对照(紧固件常用产品和常用语)紧固件中英文对照紧固件标准名称紧固件标准(常用的是德标和美标)GB（国标）ISO(国际标准)DIN（德制）JIS（日标）ANSI/ASME （AmericanNationalStandardsInstitute–ANS I；AmericanSocietyOfMechanicalEngineers–A SME）（美标）BS（英制）IFI=IndustrialFastenerInstitute 是美国工业紧固件协会的标准BA（英制）常见螺纹">螺纹中英文对照M.MF(公制牙)UNC.（美制粗牙）UNF(美制细牙)UNEF(美制超细牙)B.S.W.标准惠氏粗牙系列，一般用途圆柱螺纹(英制牙)B.S.F.标准惠氏细牙系列，一般用途圆柱螺纹(英制牙)finepitchthread细牙fullthread全螺纹螺丝头型IHH=indhexhead锯六角头PH=phillips十字槽Pan圆头(盘头)Oval半沉头H.W.H..六角小法兰H.W.F.六角大法兰CSK沙拉头(沉头)Largewafer大扁平头Bugle喇叭头Truss盘头带垫Pozi米制槽Serra-tion垫下带花FlowerHead开花头6-bobesrecess内梅花Cuphead杯头常见紧固件产品名称splitwasher弹簧垫片（一般厂家会管washer 叫“华司”）flatwasher平垫片Selftappingscrew自攻螺丝 Selfdrillingscrew自钻螺丝drywallscrew干墙螺丝/干壁螺丝/墙用螺丝highlowscrew高低牙螺丝collatedscrew链带螺丝Concretescrew水泥螺丝Tri-lobularthreadscrew三角螺丝kepnut锁紧螺母acornnut盖形螺母wingwasher翼型垫片eyebolt吊环螺栓（也叫环首螺栓，其实这个叫法很多，大概是不同地区的缘故）Pistonbolt活塞螺钉Windingbolt线圈螺钉Hexagonheadbolts六角头螺栓Hexagonflangebolts六角法兰螺栓Carriagebolt马车螺栓Squareheadbolt方头螺栓Flatcountersinksquareneckbolts沉头方颈螺栓Flatcountersunknibbolts沉头带榫螺栓Crossrecessedpanheadtappingscrews十字槽盘头自攻螺钉（如果在图纸上看到标注#2或#20等，是指该螺丝的头部适合2号或者20号的螺丝起子）紧固件表面处理方式BO=blackoxide氧化发黑（如果仅仅标注black,是指做染黑处理）Zincplated镀锌cementation渗碳nylonpatch耐落（刚看到的时候是直接按照字面翻译的“尼龙片”，拿给经理看的时候经理对照图纸看了半天跟我说你你去查下耐落的英文，果然---）6其它图纸上可能出现的标注螺纹大径：MajorDiam中径：Pitchdiam底径：Minordiam通止规：Go/Nogogage机械性能：mechanicalandphysicalpropertiesunifiedthread统一英制螺纹Lustratehydrogenaftergalvanizingtoavoid hydrogenembrittlement镀后去氢，防止氢脆Casecarburization表面渗碳Withacrossflats对边Withacrosscorners对角Radiusoffillet:头下圆角Transitionthreadlength过度螺纹Wrenchingheight扳拧高度Rockwell铬氏硬度Vickers维氏硬度Brinell布氏硬度Metallographymicroscope金相显微镜Saltspraydevice盐雾试验箱Tensiletestingmachine拉力试验机Coldforming冷打Hotforging红镦PC8=propertyclass8机械性能8级原材料：Rawmaterial球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：RollThreading热处理：heat-treatment表面处理：finish去氢：Lustratinghydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hotforging冲压：punching7海关编码73181500螺栓73181600螺帽73182100垫圈73181100方头螺钉73182300铆钉73181400自攻螺钉73182400销及开尾销国外常用英制螺纹的代号、名称和标准号标记代号名称(或用途)国别标准号备注B.S.W.标准惠氏粗牙系列，一般用途圆柱螺纹英国标准BS84牙型角为55°的英制螺纹B.S.F.标准惠氏细牙系列，一般用途圆柱螺纹 Whit.S附加的惠氏可选择系列，一般用途圆柱螺纹Whit惠氏牙型的非标准螺纹UN恒定螺距系列的统一螺纹美国标准ANSIB1.1标准牙型(牙底是平的或随意倒圆的)的内、外螺纹 UNC粗牙系列的统一螺纹UNF细牙系列的统一螺纹UNEF超细牙系列的统一螺纹UNS①特殊系列的统一螺纹UNR圆弧牙底恒定螺距系列的统一螺纹圆弧牙底的UNR、UNRC、UNRF、UNREF、UNRS只用于外螺纹而没有内螺纹UNRC圆弧牙底粗牙系列统一螺纹UNRF圆弧牙底细牙系列统一螺纹UNREF圆弧牙底超细牙系列统一螺纹UNRS圆弧牙底特殊系列统一螺纹NPT②一般用途的锥管螺纹美国标准ANSIB1.20.1牙型角为60°的英制管螺纹NPSC管接头用直管螺纹NPTR导杆连接用锥管螺纹NPSM机械连接用直管螺纹NPSL锁紧螺母用直管螺纹NPSH软管连接用直管螺纹NPTF干密封标准型锥管螺纹美国标准ANSIB1.20.3Ⅰ型PTF-SAESHORT干密封短型锥管螺纹Ⅱ型NPSF干密封标准型燃油用直管内螺纹Ⅲ型NPS1干密封标准型一般用直管内螺纹Ⅳ型ACME③一般用途的梯形螺纹美国标准ANSIB1.5牙型角为29°的英制传动螺纹①尺寸和公差使用与标准系列相同的公式计算的标准系列之外的所有直径与螺距组合。
紧固件各类产品名称术语中英文对照表
---------------------------------------------------------------最新资料推荐------------------------------------------------------ 紧固件各类产品名称术语中英文对照表紧固件各类产品名称术语中英文对照表1.紧固件定义 1.1 紧固件Fastener 1.2 商品紧固件Commercial Fastener 1.3 标准紧固件Standard Fastener 1.4 非标准紧固件Nonstandard Fastener 1.5 特殊紧固件Special Fastener 1.6 精制紧固件Finished Fastener 1.7 粗制紧固件Unfinished Fastener 1.8 螺纹紧固件Threaded Fastener 1.9 半精制紧固件Semi-Finished Fastener 1.10 有头紧固件Headed Fastener 1.11 无头紧固件Headless Fastener 1.12 压力紧固件Compression Fastener 1.13 高强度紧固件High strength Fastener 1.14 抗剪紧固件Shear Fastener 1.15 抗拉紧固件Tension Fastener 1.16 库存紧固件Stock Fastener 2.头部型式及扳拧特征 2.1 六角头Hexagon head 2.2 六角头垫圈面Hexagon head with washer face 2.3 六角头凸缘Hexagon head with collar 2.4 六角头法兰面Hexagon head with flange 2.5 方头Square head 2.6 方头、凸缘Square head with collar 2.7 三角头Triangle head 2.8 三角头、凸缘Triangle head with collar 2.9 人角头Oct-agonal head 2.10 12角头、法兰面12 point flange head (bihexagonal head) 2.11 T型头T head ( hammer head ) 2.12 圆头Round head ( button head ) 2.13 扁圆头Mushroom head ( truss head ) 2.14 圆柱头Cheese head ( flat fillister head ) 2.15 球面圆柱头Raised cheese head ( fillister head ) 2.16 盘头Pan head 2.17 沉头1/ 11Countersunk head ( flat head) ( c s k head ) 2.18 双沉头Reinforced head ( double cone ) 2.19 半沉头Raised countersunk head ( oval head ) 2.20 球面扁圆柱头Binging head 2.21 沉头清根Undercut countersunk head ( undercut flat head ) 2.22 半沉头清根Undercut raised countersunk head ( undercut oval head ) 2.23 球体头Ball head 2.24 按纽头Button head 2.25 无头Headless 2.26 圆形垫圈头Round washer head 2.27 内六角头Socket head 2.28 高圆头High botton head 2.29 双层头Biconic head 2.30 锥头Cone head 2.31 尖锥头Steeple head 2.32 喇叭头Bugle head 2.33 薄片头thin wafer 2.34 冲压凹穴型头Drilled fillister head 2.35 伞形头Stuss head 2.36 蘑菇头Mushroom head 2.37 支承面Bearing surface 2.38 垫圈面Washer face 2.39 六角Hexagon 2.40 四方Square 2.41 三角Triangle 2.42 人角Octagon 2.43 12角12 point (bihexagonal ) 2.44 内六角Hexagon socket 2.45 内三角Triangle socket 2.46 内四角Square socket 2.47 内六花键Six-spline socket 2.48 内12角12 point socket ( bihexagon socket ) 2.49 开槽Slot 2.50 十字槽 H Cross recess ( phillips ) 2.51 十（米）字槽Cross recess ( pozidriv ) 2.52 蝶形（翼形） Wing 2.53 旋棒Tommy 2.54 直纹滚花Straight knurl 2.55 网纹滚花Diamond knurl 2.56 十字孔Cross hole ( set pin hole in side ) 2.57 五角Pentagon 2.58 梅花槽Torx recess 2.59 离合槽Clutch recess 2.60 四方槽Square recess 3.杆部及其末端---------------------------------------------------------------最新资料推荐------------------------------------------------------ 3.1 标准杆Normal shank ( nominal shank diameter=nominal thread diameter) 3.2 细杆Reduced shank ( shank diameter<minor diameter ) 3.3 腰状杆Waisted shank ( shank diameter> thread diameter )1/53/ 113.4 加强杆Increased shank ( shank diamerer> thread diameter ) 3.5 轴杆Shouder ( collar ) 3.6 方颈Square neck 3.7 榫Fin 3.8 凸缘Fillet 3.9 锯齿形Serration 3.10 肋Lug 3.11 条颈Ribbed neck 3.12 胀大颈Swell neck WINDFAST-QC.DEP. page3of12 Record 2008-3-3 No. Chinese Description in English 3.13 杆(部)体Shank 3.14 锥端Cone point 3.15 截锥端Short dog point 3.16 凹端Cup point 3.17 短圆柱端Short dog point 3.18 长圆柱端Long dog point 3.19 短圆柱球面端Short dog point with rounded end 3.20 短圆柱截锥端Short dog point with truncated cone end 3.21 刮销端Scrape point 3.22 自攻螺钉的末端End for self-tapping screws 3.23 自攻锁紧螺钉的末端End for thread rolling screws (thread formed by deformation ) 3.24 辗制末端As-roller end 3.25 平端Flat point 3.26 球面端(倒圆端) Rounded end 3.27 倒角端Chamfered end 3.28 钻孔端Gimlet point 3.29 顶锻端Header point 3.30 钉子端Nail point 3.31 针端Needle point 3.32 半圆端Oval point 3.33 导向端Pilot point 3.34 球端Spherical point 3.35 夹断端Pinck point4.尺寸及形位公差 4.1 实际尺寸Actual size 4.2 允差Allawance size 4.3 基本尺寸Basic size 4.4 设计尺寸Design size 4.5 配合Fit 4.6 尺寸极限Limits of size 4.7 公称尺寸Nominal size 4.8 参改尺寸Reference size4.9 公差Tolerance 4.10 公差位置Position tolerance 4.11 对边宽度Width across flats 4.12 对角宽度Width across corner---------------------------------------------------------------最新资料推荐------------------------------------------------------ 4.13 螺纹通(测量) Go thread gauge 4.14 螺纹止(测量) No go thread gauge 4.15 头下圆角半径Radius under head 4.16 开槽宽度Slot recess width 4.17 开槽深度Slot recess depth 4.18 十字槽插入深Penetration depth 4.19 十字槽直径Recess diameter 4.20 十字槽宽度Recess width 4.21 头部直径Head diameter 4.22 头部高度Head height 4.23 头部角度Head angle 4.24 无螺纹杆径Shank diameter ( unthreaded diameter ) 4.25 无螺纹杆长Shank length ( unthreaded length ) 4.26 夹紧长度Grip length 4.27 螺纹大径Major thread diameter 4.28 螺纹小径Minor diameter ( small ) 4.29 肩距Unthreaded length under head 4.30 螺纹长度Thread length 4.31 杆长Total length 4.32 内六角扳拧深度Depth hexagon socket 4.33 内凹槽插入深度Key engagement 4.34 外径Exter diameter ( outside diameter ) 4.35 内径Internal diameter ( inside diameter ) 4.36 长度Length 4.37 宽度Breadth 4.38 厚度Thickness 4.39 高度Hight 4.40 孔径Bore diameter 4.41 法兰直径Flange diamerer 4.42 方径长度Square neck length 4.43 方径宽度Square neck width 4.44 凸缘高度Collar height 4.45 凸缘直径Collar diameter 4.46 对称度Symmerty 4.47 同轴度Concentricity ( coaxiality ) 4.48 垂直度Perpendicularity 4.49 平行度Parallelism 4.5 直度Straightriess 4.51 槽杆同轴度Recess concentricity 4.52 头杆同轴度Head concentricity5/ 114.53 头杆垂直度Head lnclination2/5---------------------------------------------------------------最新资料推荐------------------------------------------------------ 4.54 斜度Angularity ( taper ) 4.55 弧度或弯曲度Bow or camber 4.56 尾尖角Point angle 4.57 镀锌层厚度Zinc plating thickness 4.58 跳动Run-out 4.59 锥度Taper ratio 4.60 榫长Nib length4.61 榫宽Nib width 4.62 倒角.圆角Chamfer 4.63 平面度Flatness5.机械性能 5.1 抗拉强度Tensile strength 5.2 屈服强度Proof strength 5.3 屈服点Lower yield stress 5.4 扭转强度Torque strength ( torsional strength ) 5.5 剪切强度Shear strength 5.6 冲击韧性Impact strength 5.7 延伸率Elongation 5.8 断面收缩率Reduction 5.9 拉(压)应力Tension 5.10 破坏(扭)力矩Breaking torque 5.11 晶粒度Grahularity 5.12 机械性能Mechanical properties 5.13 脱碳Decarburise 5.14 渗碳Carburization 5.15 最小剩余弹力Minimum residual sping force 5.16 压负荷的百分率Percenatage of compression load 5.17 表面硬度Surface hardness 5.18 芯部硬度Core hardness 5.19 扭矩Torque ( torsion ) 5.20 表面硬化层深度Case harden depth 5.21 氢脆Hydrogen embrittlement 5.22 压载(负)荷Compression load 5.23 硬度试验Hardness test 5.24 头部坚固性试验Head soundness test 5.25 扭转试验Twisting test 5.26 弹性试验Resilience test 5.27 保证载荷试验Proof loading test 5.28 楔负载强度试验Wedge loading test 5.29 弯曲试验Bending test 5.30 旋入试验Screw-in test 5.31 最小破坏力矩试验Torsional test and minimum torques7/ 115.32 永久变形试验Permanent deformation test 5.33 盐雾试验Salt spray test 5.34 弹性Elasticity5.35 韧性Tenacity ( Toughnee ) 5.36 塑性Fiexibility 5.37 磁力碳伤Magnetic particle inspection6.材料-热处理-表面处理 6.1 碳钢Carbon steel 6.2 低碳钢Low carbon steel 6.3 中碳钢Medium carbon steel 6.4 合金钢Alloy steel 6.5 热处理钢Heat-treated steel 6.6 低马钢Low carbon martensite steel 6.7 奥氏体不锈钢Austenitic stainless steel 6.8 马氏体不锈钢Martenitic stainless steel 6.9 铁Iron 6.10 铝Aluminium 6.11 黄铜Brass 6.12 紫铜Copper 6.13 青铜Bronze 6.14 塑料Plastic 6.15 淬火Quenched 6.16 回火Tempered 6.17 退火Annealed 6.18 表面硬化Case hardened 6.19 强度等级Class 6.20 氧化Oxide ( anodizing ) 6.21 金属Metal 6.22 非金属Metalloid 6.23 发黑Black 6.24 本色Plain ( self colour ) 6.25 热处理Heat treatment 6.26 涂层Coating 6.27 表面处理Finish 6.28 涂蜡Waxed 6.29 镀锌(兰白锌) Zinc plated ( zinc / clear ) 6.30 镀黄锌Zinc yellow ( Y.Z.P.)6.31 镀黑锌Zinc plated black 6.32 镀镍Nickel plated 6.33 镀铜Brass plated 6.34 热浸镀锌Hot dip galvanized ( H.D.G.) 6.35 电镀Electplating 6.36 机械镀锌Mechanical galvaizing 6.37 表面热处理Surface heat treatment 7、加工方法7.1 冷镦Cold heading 7.2 冷锻Cold forging 7.3 热锻Hot forging 7.4 成型Forming 7.5 切削(断) Cutting3/5---------------------------------------------------------------最新资料推荐------------------------------------------------------ 7.6 缩径Shrink diameter 7.7 搓(攻)丝Threading 7.8 滚丝Thread rolling 7.9 拔丝Drawing 7.10 酸洗Pickling 7.11 钝化Passirating 7.12 废水处理Waste water treatment 7.13 研磨Grinding 7.14 镦粗Upsetting 7.15 开槽Soltting 7.16 刮削Sharing 7.17 滚花Kunrling 7.18 抛光Polishing 7.19 冲压Punching 7.20 滚动Tumbling 7.21 精整Trimming 7.22 铣削Milled 7.23 挤压Extruding 7.24 钻孔Drilling 7.25 模压Embossing 7.26 沉孔Countersinking 7.27 压印Coining 7.28 扩孔Counterboring 7.29 控削Broaching 7.30 辊光Burnishing 7.31 锻造Forging 7.32 剪切Shear 7.33 焊接Welded 7.34 喷砂Sand blasting 8.表面缺陷 8.1 裂缝Cracks 8.2 淬火裂缝Quench cracks 8.3 锻造裂缝Forging cracks 8.4 锻造爆裂Forging bursts 8.5 剪切爆裂Shear bursts 8.6 条痕Laps 8.7 凹痕Voids 8.8 皱纹Folds ( pits ) ( laps ) 8.9 切痕Tool marks 8.10 损伤Damages 8.11 毛刺Burr 8.12 碎屑Chip 8.13 夹杂Inclusions 8.14 锈皮Sharing 8.15 飞边Flash 8.16 开裂Cracks 8.17 锈、锈斑Rust9.螺纹 9.1 普通螺纹Screw thread 9.2 锥螺纹Taper screws thread 9.3 自攻螺纹(宽牙螺纹) Tapping screws thread ( spaced thread ) 9.4 木螺钉螺纹Wood screws thread 9.5 米制螺纹Metric thread 9.6 ISO 米制螺纹ISO Metric thread 9.7 米制细牙螺纹Metric fine pitch thread 9.8 ISO 米制细牙螺纹ISO Metric fine pitch thread 9.99/ 11寸制螺纹Inch thread 9.10 统一螺纹(ISO寸制) Unified screw thread ( ISO inch ) 9.11 惠氏螺纹Whitworth thread 9.12 管螺纹Pipe thread 9.13 惠氏管螺纹Whitworth pipe thread 9.14 螺旋线Helix 9.15 螺旋面Helical surface 9.16 外螺纹External thread 9.17 内螺纹Inernal thread 9.18 牙侧Flank 9.19 沟槽Groove 9.20 凸起Ridge 9.21 牙顶Crest 9.22 牙底Root 9.23 螺纹牙型Thread profile 9.24 螺纹线Thread 9.25 单线螺纹Single--start--thread 9.26 多线螺纹Multi--start--thread 9.27 右旋螺纹Right--start--thread 9.28 左旋螺纹Left--start--thread 9.29 工作牙侧Pressure ( load ) flank 9.30 非工作牙侧Clearing ( clearance ) flank 9.31 牙底的圆角半径Root radius 9.32 牙型高度Height ( or depth ) of thread 9.33 牙型角Included angle 9.34 牙型半角Flank lead 9.35 中径线Pitch line 9.36 螺纹轴线Axis of thread 9.37 导程Flank lead 9.38 双牙导程Dual flank lead 9.39 螺距Flank pitch 9.40 双牙螺距Dual flank lead 9.41 大径Major diameter 9.42 小径Minor diameter 9.43 中径Pitch diameter4/5---------------------------------------------------------------最新资料推荐------------------------------------------------------ 9.44 9.45 9.46 9.47 9.48 9.49 9.50单一中径Simple pitch diameter 作用中径Virtual pitch diameter 螺纹升角Lead angle 基本牙型Basic profile 伞状螺纹Umbrella thread 粗牙螺纹Coarse thread 细牙螺纹Fine thread5/511/ 11。
紧固件中英文对照
白鐵蓋螺絲 A2(18-8)CAP S CREWS水平調整螺絲A DJUST ED LE VELIN G SCR EWS 航太扣件AEROS PACEFASTE NERS合金鋼螺絲(栓)ALLOY STEE L SCR EWS (BOLTS)鋁螺絲 ALU MINUM SCRE WS車輛(汽車)螺絲、螺帽 AUTO MOTIV E FAS TENER S複含材料鉆尾螺絲 BI-METAL SELF DRIL LINGSCREW S 大尺寸螺絲B IG SI ZE BO LTS 公母螺絲組 BIND ER PO ST &SCREW SET拉栓B LINDBOLTS銅螺絲(栓) B RASSSCREW S (BO LTS)建築螺絲 BUIL DINGFASTE NERS建築膨漲螺絲 BU ILDIN G WAL L ANC HOR 半圓頭六角孔螺絲B UTTON HEAD SOCK ET CA P SCR EWS 馬車螺絲CARRI AGE B OLTS活動輪螺絲附件C ASTOR S FIT TINGS塑板螺絲 CHI PBOAR D SCR EWS 快速釘緊螺絲及螺帽CLINC H STU DS &NUTS擠壓扣件 CLIN CHING FAST ENERS齒花扣件 CLI NCHIN G PAR TS寬牙螺絲C OARSE THRE AD SC REWS鏈帶螺絲 COLL ATEDSCREW S水泥螺絲 CO NCRET E SCR EWS 板模扣件CONST RUCTI ON FA STENE RS貨櫃螺絲C ONTAI NER S CREWS耐候鋼螺絲 CO NTENSTEEL HEAV Y HEX BOLT S魚尾螺絲 CO NTENSTEEL OVAL NECK TRAC K BOL TS雙刀螺絲C UTTER SCRE WS匣板螺絲D ECK S CREWS鋅蝶螺絲 DIE CAST WING SCRE WS;ZI NC AL LOY 雙頭牙螺絲 DOUB LE EN D SCR EWS,HANGE R BOL T旋鎖螺絲 DR IVE L OCK S CREWS旋入螺絲 DRI VE SC REWS牆用螺絲 DRYW ALL S CREWSEJO T DEL TA PT SCRE WSE JOT P T SCR EWS 電子螺絲ELECT RONIC SCRE WS電梯螺絲E LEVAT OR BO LTS 歐洲螺絲EUROSCREW S環首螺絲 EY E BOL TS岡山頭螺絲FILLI STERSCREW S鰭頭螺絲 FI N NEC K ROU ND HE AD BO LTS 管配件接頭 FITT ING F ASTEN ERS (CONNE CTORS)突緣螺絲 FL ANGEBOLTS (SCR EWS)平頭六角孔螺絲F LAT H EAD S OCKET CAPSCREW S平紡螺絲 FL AT PA N HEA D SCR EWS 地板螺絲FLOOR ING P ANELSCREW S基礎螺絲 FO UNDAT ION B OLTS框架支撐螺絲 FR AME A NCHOR-LAGROUND SCRE WS傢俱螺絲F URNIT URE S CREWS (CON NECTI NG BO LTS)重型車螺絲、螺帽HEAVY DUTY WHEE L HUB BOLT S & N UTS 六角螺絲(栓) HE X HEA D CAP SCRE WS (H EX BO LTS)六角機械螺絲 HE X HEA D MAC HINEBOLTS六角木牙螺絲H EX LA G BOL TS內六角孔螺絲 HEXSOCKE T CAP SCRE WS等高螺絲H EX SO CKETHEADSHOUL DER S CREW薄頭強力螺絲 HE X SOC KET L OW HE AD CA P SCR EW內六角固定螺絲 HEX SOCK ET SE T SCR EWS 華司頭機械螺絲 HE X WAS HER H EAD M ACHIN E SCR EWS 高低牙螺絲 HIGH LOWTHREA D SCR EWS 高張力螺絲 HEXSOCKE T HEA D SHO ULDER SCRE W鉸鏈螺絲 HI NGE S CREWS勾頭螺栓 HOO K BOL TS管夾螺絲H OSE C LAMPSCREW S哈克釘 HUC K BOL TS旋鎖螺絲K TX LO CKING RECE SS SC REWS機械螺絲 MACH INE S CREWSMDF螺絲 MD F SCR EWS 微小精密螺絲 MIC RO SC REWS鉬六角螺絲 MOHEX H EAD C AP SC REWS鉬NC螺絲 MONC FA STENE RS鉬螺帽 MO NUTS鎳合金螺絲 MO NEL F ASTEN ERS 多衝程螺絲 MULT I-STA GE SC REW & PART S利革釘 NYL ON PL UG &SCREW S單向螺絲 ON E WAY LAGSCREW S枋頭中心螺絲PAN H EAD C ENTER BOLT S面板螺絲 PA NEL F ASTEN ERS 複合材料用螺絲(夾板用) PA RTICL E BOA RD SC REWS貫穿螺絲 PENE TRATE SCRE WS十字四角複合螺絲 PH+SQ C OMBIN ATION SCRE WS塑膠螺絲P LASTI C SCR EWS 犁壁螺絲PLOWBOLTS特殊精密螺絲P RECIS ION A XIS A ND SP ECIAL FAST ENERS卷帶螺絲 ROL L COL LATED SCRE WS屋頂螺絲R OOFIN G SCR EWS 螺旋椿S CREWSTUDS機(踏)車用螺絲.軸心S CREWS & SH AFTSFOR M OTORC YCLEOR BI CYCLE 針車用螺絲.軸心 SCRE WS &SHAFT S FOR SEWI NG MA CHINE螺絲附華司組合SCREW S & W ASHER S ASS EMBLE D (SE MS) 安全螺絲SECUR ITY S CREWS鑽尾螺絲 SEL F DRI LLING SCRE WS自攻螺絲S ELF T APPIN G SCR EWS 固定螺絲SCREW S & S HAFTS FORSEWIN G MAC HINE剪力釘SHEAR CONC RETESTUD束肩螺絲(栓) S HOULD ER SC REWS(BOLT S)一字溝槽固定螺絲 SL OTTED SETSCREW S止付螺絲 SO CKETSET S CREWS飛機特殊扣件S OURCE CONT ROL B OLTS特殊塗裝螺絲 SP ECIAL COAT ING S CREWS特長螺絲 SPE CIALLONGE R SCR EWS 特殊材質螺絲 SPE CIALMATER IAL S CREWS特殊螺絲 SPE CIALSCREW S ORBOLTS特殊防鬆螺絲S PECIA L SEL F-LOC KINGSCREW S不鏽鋼特殊螺絲 SPEC IAL S TAINL ESS S TEELSCREW S特殊割尾螺絲SPECI AL TH READCUTTI NG SC REWS四角螺絲 SQUA RE HE AD BO LTS 四角頭固定螺絲 SQ UAREHEADSET S CREWS不鏽鋼大螺絲S TAINL ESS S TEELBOLTS不鏽鋼塑板螺絲STAIN LESSSTEEL CHIP BOARD SCRE WS不鏽鋼粗牙螺絲 STA INLES S STE EL CO ARSETHREA D SCR EWS 不鏽鋼旋入螺絲 ST AINLE SS ST EEL D RIVESCREW S不鏽鋼平頭內六角孔螺絲STAIN LESSSTEEL FLAT HEAD SOCK ET CA P SCR EWS 不鏽鋼六角螺絲 ST AINLE SS ST EEL H EX HE AD CA P SCR EWS 不鏽鋼內六角螺絲S TAINL ESS S TEELHEX S OCKET CAPSCREW S不鏽鋼固定螺絲 STAI NLESS STEE L HEX SOCK ET SE T SCR EWS 不鏽鋼高低牙螺絲S TAINL ESS S TEELHIGH-LOW T HREAD SCRE WS不鏽鋼機械螺絲 STA INLES S STE EL MA CHINE SCRE WS不鏽鋼小螺絲 STAI NLESS STEE L SCR EWS 不鏽鋼鑽尾螺絲 ST AINLE SS ST EEL S ELF D RILLI NG SC REWS不鏽鋼自攻螺絲S TAINL ESS S TEELSELFTAPPI NG SC REWS不鏽鋼S EMS 螺絲 STA INLES S STE EL SE MS SC REWS不鏽鋼自削螺絲S TAINL ESS S TEELTHREA D CUT TINGSCREW S不鏽鋼牙條棒STAIN LESSSTEEL THRE AD RO D不鏽鋼三角牙螺絲 STA INLES S STE EL TR IANGU LAR S CREWTHREA D 不鏽鋼木螺絲STAIN LESSSTEEL WOOD SCRE WS卡鎖壁虎S TEELLOCKI NG AN CHOR大頭馬車螺絲 ST EP BO LTS 螺樁栓S TUD B OLTST頭螺絲 T HE AD BO LTS 扭矩控制螺栓 T.C. BOL TS (T ENSIO N CON TROLBOLTS)自削螺絲 TH READCUTTI NG SC REWS牙條棒THREA D ROD姆指螺絲 THU MB SC REWS鈦合金自行車螺絲TITAN IUM -6AL –4R AL LOY F ASTEN ERS 鈦合金螺絲 TITA NIUMALLOY BOLT S鈦六角螺絲T ITANI UM HE X HEA D CAP SCRE WS (H EX BO LTS)鈦NC螺絲 TIT ANIUM NC F ASTEN ERS 鈦止付螺絲 TITA NIUMSET S CREWS鈦內六角孔螺絲TITAN IUM S OCKET CAPSCREW S鈦牙條 TIT ANIUM THRE AD RO D套掛螺絲 TO GGLEBOLTS套掛螺栓及螺絲TOGGL E BOL TS &ACOUS TICAL LAG(SCRE WEYE)馬桶螺絲 TOI LET C LOSET BOLT STO RX SC REWSTORXSCREW S軌道螺栓(魚尾螺絲) T RACKBOLTS三角牙螺絲 TR IANGU LAR S CREWS THRE ADU型螺栓U BOLT S直立軸螺絲V ERTIC AL SH AFT S CREWS焊接螺絲 WEL D STU DS,SC REWS,BOLTS焊點螺絲 WEL D STU DS SC REWS輪轂螺栓 WHEE L BOL TS車輪軸螺絲,螺帽 WH EEL H UB BO LTS A ND NU TS窗戶螺絲W INDOW SCRE WS翼形螺絲W ING S CREWS木螺絲 WOOD SCRE WS鋯螺絲 ZR FAST ENERSSET SCRE WS SE T SCR EWS HIGHSTREN GTH B OLTSHIGHSTREN GTH B OLTS鐵蓋焊接袋帽 AC ORN C AP NU TS金屬預置扭矩式螺帽A LL-ME TAL P REVAI LINGTORQU E TYP E NUT S 合金鋼螺帽A LLOYSTEEL NUTS鋁螺帽 ALUM INUMNUTS壁虎螺帽 ANCH OR NU TS圓柱帽 BA RRELNUTS(CROS S DOW EL) 大尺寸螺帽 BIGSIZENUTS銅螺帽BRASS NUTS四角多用途螺帽CAGENUTS袋帽C AP NU TS城堡螺帽C ASTLE NUTS齒花螺帽 CLI NCH N UTS 鐵蓋袋帽CLOSE D END ACOR N NUT S盤形華司+袋帽螺帽 CO NICAL WASH ER AN D CAP NUTS 盤形華司螺帽C ONICA L WAS HER N UTS 耐候鋼六角重型螺帽CORTE N STE EL HE AVY H EX NU TS 長螺帽 CO UPLIN G NUT S鐵蓋+尼龍圈組合蓋帽D IN 986 DOM ED CA P NUT S碟鎖防鬆脫螺帽 DISK-LOCK NUTS企眼螺帽 EYE COUP LINGNUTS環首螺帽 EYENUTS突緣尼龍螺帽 FL ANGENYLON INSE RT LO CK NU TS平面華司螺帽 FLAT WASH ER NU TS齒輪 GEA RS六角重型螺帽 HEAV Y HEX NUTS六角蓋頭螺帽H EX CA P NUT S六角突緣螺帽HEX F LANGE NUTS薄型螺帽 HEX JAMNUTS薄型電子六角螺帽HEX J AM NU TS (F OR EL ECTRO NIC)機械螺絲用六角螺帽 HEXMACHI NE SC REW N UT普通六角螺帽 HEXNUTS六角鋸齒螺帽 HE X SER RATED NUTS雙頭內牙螺帽H EX (R EDUCE R )CO UPLIN G NUT S高螺帽 HIG H NUT S高張力螺帽H IGH S TRENG TH NU TS內外牙螺母(拉帽) I NSERT NUTSJCN NUTS JCNNUTS齒形螺帽 KEPNUTS防鬆螺帽 LOCK NUTS長螺帽 LONG NUTS機車用螺帽 NU TS FO R MOT ORCYC LE面板螺帽N UTS P LATE尼龍袋帽 NYLO N CAP INSE RT LO CK NU TS尼龍嵌入防鬆螺帽 NY LON I NSERT LOCK NUTS馬桶螺帽 OPE N END ACOR N NUT S卡車輪胎螺帽OUTER CAPNUTS管用螺帽 PIPE NUTS塑膠螺帽 PLA STICNUTSPOPNUTSPOP N UTS 抑制螺帽PREVA ILING TORG UE NU T快速扣件 PU SH NU T FAS TENER S長方形螺帽(薄型) RE CTANG LE JA M NUT S長方四角螺帽RECTA NGLESQUAR E NUT S圓螺帽 ROU ND NU TS自鎖螺帽S ELF-L OCKIN G NUT S制止螺帽 SL IDING NUTSSLN-自鎖防鬆螺帽 SL N SEL F-LOC KINGNUTS溝槽螺帽 SLOT TED N UTS 特殊螺帽SPECI AL NU TS特殊輪轂螺帽 SPEC IAL W HEELNUTS彈簧螺帽 SPRI NG NU TS薄型四角螺帽 SQUA RE JA M NUT S四角螺帽 SQ UARENUTS不鏽鋼突緣螺帽S TAINL ESS S TEELFLANG E NUT S不鏽鋼六角突緣尼龍螺帽STAIN LESSSTEEL FLAN GE NY LON I NSERT LOCK NUTS不鏽鋼六角重型螺帽 STA INLES S STE EL HE AVY H EX NU TS不鏽鋼六角螺帽 STA INLES S STE EL HE X NUT S不鏽鋼螺帽S TAINL ESS S TEELNUTS不鏽鋼尼龍嵌入螺帽 STAI NLESS STEE L NYL ON IN SERTLOCKNUTS不鏽鋼四角螺帽S TAINL ESS S TEELSQUAR E NUT S建築用螺帽S TRUCT URALNUTST形螺帽 T NU TS塑膠品之埋植銅,鋁螺帽 THRE ADEDINSER TS FO R PLA STICINJEC TIONMOULD INGS鈦螺帽TITAN IUM N UTS 壓邊螺帽+盤形華司組合 TOP LOCK NUTWITHCONIC AL WA SHERASSEM BLE U形螺帽U NUT S焊接螺帽 WE LD NU TS輪轂螺帽W HEELNUTS蝶形螺帽 WING NUTS鋅壓鑄螺帽 ZI NC DI E CAS TINGNUTS鋁釘A LUMIN UM NA ILS 馬達軸承軸心組件B EARIN G SHA FT（MO TOR）軸承軸心 BEAR ING S HAFT開口鉚釘 BIFU RCATE D RIV ETS 長形拉帽（長型螺帽） BIND ER PO STS（A NCHOR NUTS）拉帽 BLIN D NUT S (RI VET N UTS)拉釘B LINDRIVET S電梯壁虎 BO LT AN CHOR金屬黏著橡膠華司（雙層華司） BOND ED WA SHERS銅釘BRASS NAIL SC型扣環 C-RINGS小眼釘 CEIL ING H ANGER化學壁虎 CHE MICAL STUD實心梢 CLEV IS PI NS &STRAI GHT P INS 彈片 CL IPS 捲釘 CO IL NA ILS 冷鍛零件COLDFORMI NG PA RT開口梢 CO TTERPINS洋釘鉤CUP H OOKS弧型華司 CURV ED WA SHER外迫壁虎 CUTANCHO R插梢 DOWE L PIN捶釘DRIVE RIVE T壁虎 DROP IN A NCHORE型環 E-RI NGS 膨脹螺栓EXPAN SIONANCHO R BOL TS難眼釘 EY ELETS RIVE TS門鉤 GAT E HOO KS插溝銷 GR OOVED PINS有槽鋼釘 GRO OVEDSTEEL NAIL S火藥釘 GUN POWDE R NAI LS壁鉤 HAR DWALL HANG ERS 雙片夾壁虎 HEAV Y DUT Y SHI ELD A NCHORR型梢 HITC H PIN S（SNA P PIN S）空心釘 HO LLOWRIVET S洋釘 IRON NAIL SJ鉤 J HO OKK.D. F ITTIN G K.D. FIT TING閂鎖L ATCHE S & K EEPER ASSE MBLED S多衝程鉚釘M ULTI-STAGE RIVE RS錘釘壁虎N AIL I N ANC HOR 尼龍壁虎NYLON (MET AL) F RAMEANCHO R塑膠華司 NY LON W ASHER S其他特殊鉚釘OTHER SPEC IAL R IVETS樣品鉤 PEGB OARDHOOK吊圖鉤PICTU RE HA NGERS梢P INS 各式管夾,管束 PI PE HA NGER管塞P IPE P LUG 塑膠壁虎PLAST IC NY LON A NCHOR SPO P拉釘系列產品 PO P RIV ETS 快速插銷QUICK RELE ASE P INS R型扣環R-RIN GS扣環 RIN GS鉚釘 RIV ETS 圓棒鐵釘ROUND IRON NAIL ST型鐵釘 RO UND I RON T APE T NAIL圓棒鋼釘 ROU ND ST EEL N AILST型鋼釘 ROUN D STE EL TA PE TNAILSU型鋼釘 ROU ND ST EEL T APE U NAIL S橡膠華司 RU BBERWASHE RSS鉤 S H OOKSS型扣環 S-RI NGS 螺旋鋁釘SCREW ALUM INUMNAILS螺旋環(洋眼)SCREW EYES螺旋鉤及螺旋圈SCREW HOOK & SC REW R INGS螺絲鉤SCREW HOOK S螺旋鐵釘 SC REW I RON N AILS螺旋鋼釘 SCRE W STE EL NA ILS 中空鉚釘SEMI-TUBUL AR RI VET 套管壁虎SLEEV E ANC HOR 實心鉚釘SOLID RIVE TS特殊華司S PECIA L WAS HERS快速鉚接扣件 SP EED R IVETI NG開叉釘 SP LIT D RIVEANCHO RS彈簧梢 SP RINGPIN 彈簧華司SPRIN G WAS HERS彈簧蝴蝶夾 SPR ING W INGS折釘S QUARE HOOK S不鏽鋼鋼釘S TAINL ESS S TEELNAILS不鏽鋼中空釘S TAINL ESS S TEELSEMI-TUBUL AR RI VET 不鏽鋼斜紋釘 STA INLES S STE EL SL ANTIN G STR IPESNAILS 不鏽鋼華司 ST AINLE SS ST EEL W ASHER S鋼鐵釘 STE EL &IRONNAILS鋼釘STEEL NAIL SL型鋼釘 ST EEL T APE L NAIL S鐵馬鉤 STO RAGEHOOK吸盤鉤SUCTI ON HA NGERS蘭花鉤 SWAG HOOK S三角吊鉤 SW IVELLOOPHANGE RS地毯鋼釘T ACKED IRON NAIL S搓牙鐵釘 TH READNAILS大眼釘 TIEWIRESPADE STUD鈦合金鉚釘 TI TANIU M ALL OY RI VETS鈦合金膨漲螺絲T ITANI UM AL LOY E XPANS ION B OLTS鈦華司TITAN IUM W ASHER S齒型華司 TO OTH L OCK W ASHER S管形鉚釘 TU BULAR RIVE TS雙向迫緊器TURNB UCKLE節牙鋼釘 W/S TRIPSTEEL NAIL S華司 WASH ERS 波浪型華司 WAVE WASH ER拉漲壁虎W EDGEANCHO R線圈 WIRE鋅合金壁虎 ZI NC AL LOY F RAMEANCHO R螺絲,螺帽,五金,DIY扣件 AL L KIN DS OF PACD AGIN G SER IES 合金鋼工具 ALLO Y STE EL TO OLS 電子手把HANDL ES FO R ELE CTRON IC DE VICES六角板手 HEX AGONKEYS螺絲起子 POWE R BIT螺絲起子 SCR EWDRI VER B IT電動螺絲起子 AUTO FEEDSCREW DRIVE R工具套筒組件SOCKE T SET S套筒 SOCK ETS 板手 WR ENCH自動鍊帶螺絲槍A UTOFE ED SC REW D RIVER合金鋼線材盤元ALLOY STEE L WIR E ROD鋁合金錠 ALU MINUM ALLO Y球狀化線材A NNEAL ING W IRE & ROD黑鐵絲BLACK WIRE黃銅棒線 BRA SS WI RE &ROD 磨光棒鋼BRIGH T STE EL BA R (HE X/ROU ND/SQ UARE)銅合金線 COP PER A LLOYWIRE線切割線 E.D.M CUT TINGWIRE快削鋼線材盤元F REE C UTTIN G STE EL WI RE RO D鍍鋅鐵線 GA LVANI ZED S TEELWIRE線材I RON O R STE EL WI RE線材盤元I RON O R STE EL WI RE RO D洋白銅線 NI CKELSILVE R WIR E磷青銅線 PH OSPHO R BRO NZE W IRE 各種表面處理用噴砂材料 SAN D BLA STING MATE RIALS不鏽鋼條棒 ST AINLE SS ST EEL B AR (R OUND/HEX/S QUARE)不鏽鋼冷鍛線材 STAI NLESS STEE L COL D HEA DINGWIRE不鏽鋼線(抽線後) STAI NLESS STEE L DRA W WIR E不鏽鋼網線S TAINL ESS S TEELNET W IRE 不鏽鋼特殊線 STA INLES S STE EL SP ECIAL WIRE不鏽鋼彈簧線S TAINL ESS S TEELSPRIN G WIR E不鏽鋼線材S TAINL ESS S TEELWIRE不鏽鋼線材及盤元STAIN LESSSTEEL WIRE & RO D棒鋼 STEE L BAR(HEX/ROUND/SQUA RE) 鈦、鋯、鉬、鈮等螺絲、零件、材料 TI、ZR、MO、NB P ARE M ETALBOLTS PART S鋅合金錠 ZI NC AL LOY 立體/平面雕刻機3D DIE-SINK ING M ACHIN E/ENG RAVIN G MAC HINE轉回90度輾線頭機 90°R EVOLV ING W IRE T WISTI NG MA CHINE乾燥機 AIRDRYER氣動拉釘機 AI R RIV ETER鋁,低合金熔解熱處理爐 AL UMINU M & L OW AL LOY M ELTIN G FUR NACE鋁散熱器燒焊熱處理爐 ALU MINUM BRAZ ING F URNAC E FOR ALUM INUMCONDE NSER不鏽鋼線材連續式光輝熱處理退火爐 AN NEALI NG FU RNACE SPEC IALLY FORSTAIN LESSWIRE小型脫油機 ANT I-OIL MACH INE 自動包裝機 AUTO MATIC PACK ING M ACHIN E螺絲自動檢查設備 AUT OMATI C SCR EW SO RTING MACH INE 自動送鎖螺絲機 AU TOMAT IC SC REWIN G MAC HINE螺絲割尾加工機械AUTOM ATICTHREA D SLO TTING MACH INE 螺絲製造成型機械A UTOMA TIC T RIMMI NG MA CHINE箱式滲碳氮化爐BATCH TYPE CARB URIZI NG &MITRI DINGFURNA CE鐘罩式退火(球化)爐BELLTYPESPHER OIDIZ ING A NNEAL ING F URNAC E拉帽成型機B LINDNUT F ORMER S拉釘打頭機B LINDRIVET HEAD ING M ACHIN E螺絲(栓)成型機 BOL T FOR MERS螺絲、螺帽成型機BOLTFORME RS, N UT FO RMERS, HEA DERS螺栓模BOLTHEADI NG DI ES螺絲、螺帽熱處理 BO LT,NU T & S CREWS HEAT TREA TMENT螺絲、螺帽熱處理爐 BOL T,NUT & SC REWSHEATTREAT MENTFURNA CES 圓剪式打頭機 BUS H CUT-OFFHEADI NG MA CHINE圓剪式空心打頭機 BUSH CUT-OFF H OLLOW HEAD ING M ACHIN E主模 CARB IDE D IES 剪模 CA RBIDE QUIL LS不鏽鋼螺絲,扣件連續式光輝調質淬火爐 CA RBURI ZINGFURNA CE FO RSTA INLES S FAS TENER球狀化電氣炖爐CARBU RIZIN G FUR NACE,VACUU M & B ELL T YPE F URNAC E 流氣式箱型爐(箱式,坑式,台車式,連續式)CIRCU LATIO N FUR NACE(BOX,PIT,T RUCK,CONTI NUOUS TYPE)CN C電腦雕刻機 CNC ENGR AVING MACH INE 捲釘製造機 COIL NAIL COLL ATOR連續式光輝滲碳,淬火,回火爐 CONT INUOU S BRI GHT C ARBUR IZING &HA RDENI NG FU RNACE連續式光輝滲碳淬火爐 CO NTINU OUS B RIGHT CARB URIZI NG QU ENCHI NGFU RNACE連續式光輝調質淬火爐 CO NTINU OUS B RIGHT HARD ENING QUEN CHINGFURN ACE 中,高熱鍍鋅光輝連續爐 CON TINUO US BR IGHTHEATTREAT FURN ACE 連續式光輝熱處理爐(不鏽鋼,硬銲) CO NTINU OUS B RIGHT TREA TMENT (FOR STAI NLESS,BRAZ ING)連續式光輝熱處理爐 CONT INUOU S TYP EBRI GHT H EAT T REATM ENT F URNAC E耐腐蝕表面處理爐(耐鍊) CORR OSION RESI STANC E OFSURFA CE TR EATME NT FU RNACE剪刀(螺絲模)CUT-O FF KN IVES集塵設備 CYCL ONE E QUIPM ENT 各種碳化鎢製品設計製造 DES IGN & MANU FACTU RE OF TUNG STENCARBI DE PR ODUCT S模具 DIES & TO OLS 鑽尾模D RILLPOINT DIES耐衝螺絲成型模具 FAST ENERFORMI NG DI ES螺絲、螺帽品檢量測儀器 FAST ENERS INSP ECTIO N ANDMEAS UREME NTS’I NSTRU MENTS精密過濾器 FI LTER滾溝牙板 FLAT KNUR LINGDIES一般線材,盤元,退火爐 GE NERAL WIRE,WIRE RODANNEA LINGFURNA CE手動拉釘鉗HANDRIVET ER倒立式滑落型伸線機H ANDST AND T YPE W IRE D RAWIN G MAC HINE白鐵針HEADE R PUN CHESFOR S TAINL ESS B OLT 三角,四角,六角針HEADE R PUN CHESIN VA RIOUS DRIV ES(1)米字,一字,梅花,零號針HEADE R PUN CHESIN VA RIOUS DRIV ES(2)一字六角邊沖頭HEADE R PUN CHESIN VA RIOUS DRIV ES(3)螺絲打頭機 HE ADING MACH INE 六角沖針HEX P INS 六角沖模HEX R ECESS PUNC HES 六角沖模HEX T RIMMI NG DI ES螺絲製造高速搓牙機械HIGHSPEED AUTO MATIC THRE AD RO LLINGMACH INE 高中低週波感應加熱爐 HIGH,MEDI UM,LO W FRE QUENC Y IND UCTIO NHEA TER 空心打頭機 HOLL OW HE ADING MACH INE 熱鍛造機HOT F ORMER沖銷KNOCK OUT P INS 雷射/影像篩選機L ASER/OPTIC AL SO RTING MACH INE F OR SC REWS立式輸送機 LOA DER 機械螺絲牙板 MAC HINESCREW THRE AD RO LLING DIES PLAT ES沖床用的沖具 MANU FACTU RE OF PUNC H FOR PRES S DIE螺絲,螺帽用的沖具 MAN UFACT URE O F PUN CH MA KINGBOLTS ANDNUTS迷你成型機 MIN I-FOR MERS鐵釘滾牙機 NAI L ROL LINGMACHI NE鐵釘模具N AILSDIE 成品自動收線機 NO N-STO P COI LER 精抽自動收線機 NO N-STO P COI LER (SKINP ASS)螺帽模NUT F ORMIN G DIE S螺帽成型機N UTS F ORMER S螺帽攻牙機N UTS T APPIN G MAC HINE特殊零件成型機P ARTSFORMI NG MA CHINE腳踏板系列自動組立專用機PEDAL AUTO MATIC ASSE MBLIN G MAC HINE十字四角複合針P H+SQCOMBI NATIO N PUN CHES四角十字沖模十字沖模P HILLI PS PU NCHES十字割溝沖模P HILLI PS SL OTTED PUNC HES 沖針殼P IN HO LDERS鎖用中心零件P INS T AILPI ECE 拋光機/磨光台 PO LISHI NG MA CHINE手握式螺絲自動供給鎖緊機PORTA BLE S CREW-DRIVI NG MA CHINE粉末治金燒結,黑化爐 PO WDERMETAL LURGY &ST EAM T REATM ENT F URNAC E米字沖模 PO ZI PU NCHES沖模PUNCH DIES沖子PUNCH PINS沖針沖床引伸模具 PU NCHIN G DIE S羅拉成型機R OLLER S FOR MERSRX,D X瓦斯變成爐,AX氨氣分解爐 RX,D X GAS GENE RATOR,AX A MMO G ASGE NERAT OR鹽浴式熱處理爐 SAL T BAT H HEA T TRE ATMEN T FUR NACE各式表面處專用噴砂機 SAN D BLA STING MACH INE F OR SU RFACETREA TMENT螺絲自動組合華司機器 SC REW & WASH ER AS SEMBL Y MAC HINEFOR S EMS 機(踏)車用螺絲成型機 SCR EW FO R MOT ORCYC LE OR BICY CLE H EADIN G MAC HINE螺絲夾尾模 SCR EWS T AIL P OINTDIES鑽尾螺絲成型機S ELF-D RILLI NG SC REW F ORMIN G MAC HINE鑽尾模具 SELF-DRIL LINGSCREW MAKI NG DI ES止付螺絲成型機 SET SCRE WS FO RMERS梅花沖頭 SIX LOBE PUNC HES 一字沖模SLOTPUNCH ES套筒成型機SOCKE TS FO RMERS碳鋼盤元,線材,球狀化熱處理退火爐SPHER OIDIZ ING A NNEAL ING F URNAC E FOR STEE L WIR E一般線材,盤元,螺絲合金炖爐 SP HEROI DIZIN G BRI GHT A NNEAL ING F URNAC E 球狀化熱理爐SPHER OIDIZ ING H EAT T REATM ENT F URNAC E四角孔針具S Q PUN CHES四角沖模 SQUA RE RE CESSPUNCH ES不鏽鋼鑽尾螺絲割尾S TAINL ESS S TEELSELFDRILL ING S CREWMILLE DPOI NT鑽子 TAP攻牙機 TAPP ING M ACHIN E自攻螺絲牙板TAPPI NG SC REW T HREAD ROLL ING D IES P LATES螺絲攻、車刀、模具 TAP S DIE S & T OOLS鐵氟龍(TEFLO N)及琺瑯燒付爐T EFLON COAT ING F URNAC E搓牙機鐵屑牙離裝置 TH READCHIPSEPAR ATOR滾牙輪THREA D ROL LINGDIES牙板T HREAD ROLL ING D IES P LATES螺絲搓手機 TH READROLLI NG MA CHINE精密油壓滾牙機THREA D ROL LINGMACHI NES 貨物捆綁系統 TIE DOWN HARD WARE彈簧機週邊零件T OOLIN G PER IPHER AL CO MPONE NT OF SPRI NG MA CHINE六角整頭模 TR IMMIN G DIE S HEX AGON碳化鎢模具 TUN GSTEN CARB IDE D IEU NILOC K SEL F-LOC KINGAND S EAL-L OCKIN G UNI LOCKSELF-LOCKI NGAN D SEA L-LOC KINGFASTE NERS電鍍化學原料 VA RIOUS ELEC TROPL ATING CHEM ICALS立式單雙層連續伸線機 VE RTICA L TYP E SIN GLE D ECK W IRE D RAWIN G MAC HINE溫鍛造機 WARM FORM ER伸線機 WI RES D RAWER特殊鉚合扣件C OLLAR S (ABLIND FAST ENERFOR H UCK I NTL)電器銀接點 CON TACTPOINT螺絲D IY包裝系列 DIY SCRE WS PA CKING SERI ES自攻螺紋襯套 ENSA T THR EAD I NSERT螺絲、螺帽成型攻牙專用油FORMI NG &TAPPI NG OI LS FO R BOL TS &NUTSFORME RS鉸鏈 HIN GES 熱浸鍍鋅螺絲,螺帽HOT D IP GA LVANI ZINGBOLTS & NU TS工業用鍊I NDUST RIALSTEEL LINK CHAI NS安全護套K-SERT機車離合器零件MANUF ACTUR E OFMOTOR CYCLE’S CV T PAR TS鏡托 MIR ROR H OLDER S螺絲套筒 NU T SET TERS尼龍頭（用於螺絲頭部） NY LON H EAD（F OR SC REWS）尼龍圈（用於防鬆螺帽）N YLONRING（FOR L OCK N UTS）O.E.M. 組件 O.E.M. PA RTS 精密加工元件 PRE CISELATHE CUTT ING P ARTS精密車床零組件P RECIS ION T URNIN G PAR T沖壓零件 PU NCHIN G PAR TS螺紋護套R ECOIL INSE RTS 軛鐵(T型鐵、U型鐵) T-Y OKE,U NDERYOKE喇叭頭軛鐵 U-Y OKE,T-YOKE FORSPEAK ER輪子零件W HEELCOMPO NENT木螺絲牙板 WOO D SCR EW DI ES。
紧固件中英文术语对照
thread rolling
cylindrical dies
滚丝模
class
班 shift
kockwell
apparatus 硬
度计
百分表
千分表
figure
required r/min Horse power Through Thru hole length
pilot lot qualification
Supplier Frozen Process Change Request first piece qualification
when applicable not applicable total indicator reading quality improvement plan
unit of measurement quality assurance new component
铸造
carbon steel 碳钢
low carbon 低碳
witness quenching hardening solution treated
ultimate
etctera reference
stainless steel 不锈钢
structural 结构钢
package
包装物（pkg，pk）
carbonitridin g
碳氮共渗
grain size 晶粒度
maint
维修保养
MANUF
制造，生产，加工
C
鉴定合格
REF
参考尺寸
REF
化学成分
机械性能
fractions
分数
decimal
十进制小数
form
最全紧固件中英文对照
最全紧固件中英文对照，外贸必备词典！一、紧固件Fasteners标准紧固件StandardFasteners非标准紧固件NonstandardFasteners特殊紧固件SpecialFasteners汽车紧固件AutomotiveFasteners铜制紧固件BrassFasteners航天用紧固件AerospaceFasteners精密紧固件PrecisionFasteners化学紧固件ChemicalFasteners摩托车紧固件MotorcycleFasteners不锈钢紧固件StainlessSteelFasteners铁道紧固件RailwayFasteners防松紧固件Self-lockingFasteners高强度紧固件HighstrengthFastenersPEM紧固件PEMFasteners钢结构紧固件SteelStructuralFasteners压铆紧固件Self-ClinchingFasteners铝制紧固件AluminumFasteners钛合金紧固件TitaniumAlloyFasteners尼龙紧固件NylonFasteners精制紧固件FinishedFastener粗制紧固件UnfinishedFastener螺纹紧固件ThreadedFastener半精制紧固件Semi-FinishedFastener抗剪紧固件ShearFastener抗拉紧固件TensionFastener面板紧固件PanelFasteners二、螺栓Bolts六角头螺栓HexagonHeadBolts六角法兰面螺栓HexagonFlangeBolts轨道螺栓（鱼尾螺丝）TrackBolts高强度螺栓HighStrengthBolts地脚螺栓EyeletBolts马车螺栓CarriageBolts护拦螺栓GuardrailBots焊接螺栓WeldBolts双头螺栓DoubleEndBolts钢结构连接副StructuralBolting内六角螺栓HexSocketBolts合金钢螺栓AlloySteelBolts复合材料用螺钉（夹板用）ParticleBoardScrews犁壁螺钉PlowBolts不锈钢木螺丝StainlessSteelWoodScrews套挂螺栓及螺钉ToggleBolts钛合金膨胀螺钉TitaniumAlloyExpansionBolts不锈钢高低牙螺钉StainlessSteelHigh-LowThreadScrews 不锈钢机械螺钉StainlessSteelMachineScrews不锈钢钻尾螺钉StainlessSteelSelfDrillingScrews不锈钢自攻螺钉StainlessSteelSelfTappingScrews不锈钢自削螺钉StainlessSteelThreadCuttingScrews不锈钢三角牙螺钉StainlessSteelTri-LobularThreadScrews 不锈钢宽牙螺钉StainlessSteelCoarseThreadScrews开槽沉头螺钉SlottedFlatCountersunkHeadMachineScrews 开槽盘头螺钉SlottedPanHeadMachineScrews十字槽盘头螺钉CrossRecessedPanHeadMachineScrews 滚花头台阶螺钉KnurledThurmbScrews六角头木螺钉HexagonHeadWoodScrews平头滚花螺钉KnurledThinThumbScrews?四、螺母/螺帽Nuts六角螺母HexagonNuts六角盖形螺母HexCapNuts六角锯齿螺母HexSerratedNuts六角法兰螺母HexFlangeNuts六角平面螺母HexFlatNuts六角厚螺母HexThickNuts重型六角开槽螺母HeavyHexagonSlottedNuts高脚螺母HexCouplingNuts(HighNuts)圆螺母RoundNuts四角螺母/四方螺母SquareNuts四方焊接螺母SquareWeldNuts四爪螺母Four-ClawNuts管用螺母PipeNuts轮壳螺母WheelNuts蝶型螺母WingNutsU形螺母UNutsT形螺母TNuts环首螺母EyeNuts齿形螺母KepNuts齿花螺母ClinchNuts焊接螺帽WeldNuts压铆螺母Self-clinchingNuts高张力螺母HighStrengthNuts建业用螺母StructuralNuts不锈钢螺母StainlessSteelNuts铜螺母BrassNuts铝螺母AluminumNuts合金钢螺母AlloySteelNuts重型车螺母HeavyDutyWheelHubNuts铁器焊接袋帽AcornCapNuts金属预置扭矩式螺母All-MetalPrevailingTorqueTypeNuts壁虎螺母AnchorNuts大尺寸螺母BigSizeNuts铁盖袋帽ClosedEndAcornNuts盘形华司螺母ConicalWasherNuts铁盖+尼龙圈组合盖帽Din986DomedCapNuts法兰尼龙盖帽FlangeNylonInsertLockNuts平面华司螺母FlatWasherNuts六角割沟螺母HexSlottedNuts自锁螺母Self-LockingNuts制止螺母SlidingNutsSLN-自动防松螺母SLNSelf-LockingNuts特殊螺母SpecialNuts弹簧螺母SpringNuts不锈钢法兰螺母StainlessSteelFlangeNuts不锈钢六角轮缘尼龙螺母StainlessSteelFlangeNylonInsertLockNuts 不锈钢六角重型螺母StainlessSteelHeavyHexNuts不锈钢六角螺母StainlessSteelHexNuts不锈钢尼龙嵌入螺母StainlessSteelNylonInsertLockNuts普通六角螺母HexNuts六角重型螺母HeavyHexNuts薄型螺母HexJamNuts尼龙嵌入防松螺母NylonInsertLockNuts尼龙锁紧螺母NylonCageNuts机械螺丝用六角螺母HexMachineScrewNuts米制六角开槽螺母MetricSlottedHexNuts轨道螺栓用方螺母TrackBoltNuts米制六角金属锁紧螺母PrevallingTorqueHexagonNuts开槽螺母SlottedRoundNuts六角开槽薄螺母HexagonSlottedThinNuts?五、螺柱Studs?压铆螺柱Self-ClinchingStuds铜螺柱BrassStuds焊接螺柱WeldStuds双头螺柱DoubleEndStuds六角螺柱HexStuds支撑卡柱Self-ClinchingStandoffs?六、垫圈Washers弹簧垫圈SpringWashers/SpringLockWashers宽型弹簧垫圈Extra-dutyHelicalSpringLockWashers杯型垫圈Cupwashers波形垫圈WaveWashers内齿垫圈InternalToothWashers外齿垫圈ExternalToothWashers铜垫圈CopperWashers方垫圈SquareWashers密封垫圈SealingWashers碟形弹簧垫圈DiscSpringWashers外舌止动垫圈ExternalTabWashers高强度垫圈Highstrengthenwashers橡胶垫圈RubberWashers锁紧垫圈LockWashers平垫圈PlainWashers鞍型弹性垫圈CurvedSpringWashers锯齿锁紧弹性垫圈Toothedlockwashers外锯齿锁紧垫圈SerratedLockWashers锥形垫圈TaperWashers重型弹簧垫圈HeavySpringLockWashers尼龙垫圈NylonWashers淬硬钢垫圈HardenedSteelWashers?七、铆钉Rivets?平头铆钉FlatHeadRivets击芯铆钉DriveRivets彩色铆钉ColoredRivets沉头铆钉CountersunkHeadRivets半沉头铆钉OvalCountersunkHeadRivets平锥头铆钉ConeHeadRivets抽芯铆钉BlindRivets开口铆钉SplitRivets开口型抽芯铆钉OpenEndBlindRivets拉铆钉PopRivets封闭铆钉ClosedEndRivets封闭性抽芯铆钉SealedTypeBlindRivets塑料铆钉PlasticRivets空心铆钉TubularRivets环槽铆钉RingGrooveRivets单鼓型铆钉Single-GripRivets圆头铆钉RoundHeadRivets高沉头铆钉CountersunkHeadRivets铝铆钉AluminumRivets实心铆钉SolidRivets沉头实心铆钉CountersunkHeadSolidRivets灯笼铆钉LanternBlindRivets半空心铆钉Semi-TubularRivets圆头半空心铆钉Semi-tubularPanHeadRivets异型铆钉SpecialRivets不锈钢铆钉StainlessSteelRivets双鼓型铆钉Multi-gripRivets高强度铆钉HighStrengthRivets台阶铆钉StepRivets面板铆钉TabletRivets开花型抽芯铆钉FloweringBlindRivets拉花型抽芯铆钉PeelTypeBlindRivets沟槽型抽芯铆钉GroovedTypeBlindRivet铆接工具RivetingTool?八、壁虎（膨胀螺栓）Anchors/ExpansionBolts化学锚栓ChemicalAnchors打入式壁虎HammerDriveAnchors内迫壁虎DropinAnchors重型壁虎HeavyDutyAnchors锤钉壁虎HitAnchors中空壁虎HollowWallAnchors套管壁虎SleeveAnchors插片壁虎CeilingAnchors门窗、地板专用壁虎NylonFrameAnchorsorMetalframeAnchors电梯壁虎BoltAnchors车修壁虎WedgeAnchors鱼眼壁虎TieWireAnchors外迫壁虎CutAnchors塑料膨胀PlasticAnchors不锈钢重载胀栓HeavyDutyExpansionAnchors象脚壁虎ElephantFootAnchors长型兰花夹ShortStrapAnchors?九、销Pins?开口销SplitPins圆锥销TaperPins锁销LockPins销轴ClevisPinswithhead槽销GroovedPins弹性销SpringPins圆柱销ParallelPins弹性圆柱销SlottedSpringPins带孔销Pinswithsplitpinhole?十、挡圈Circlips/Rings?开口挡圈Erings孔用挡圈Circlipsforholes轴用钢丝挡圈RoundwireSnapRingsforshaft 轴肩挡圈Ringsforshoulder夹紧挡圈GripRings轴用卡簧Circlipsforshafts带齿轴用挡圈RetainingRingswithLugsforshafts 钢丝锁圈RoundwireCirclips锥形锁紧挡圈LockRingswithconepins?十一、其他Others?牙条ThreadedRod冲压件Stampings平键ParallelKeys半圆键WoodruffKeys扳手Spanners钢丝螺套WireThreadInsert自动车床车削件CNCTurningParts齿轮Gears模具Molds线材盘元Ironorsteelwirerod铰链Hinge表面处理SurfaceTreatment。
紧固件中英文对照大全
--------------------------------------------------------------------------------螺栓－－方头螺栓C级UDC 621.882.6 | GB 8-88 | 代替GB8-76Square head bolts-Product grade C－－沉头方颈螺栓UDC 621.882.6 | GB 10-88 | 代替GB10-76Flat countersunk square neck bolts－－沉头带榫螺拴UDC 621.882.6 | GB 11-88 | 代替GB11-76Flat countersunk nib bolts－－半圆头方颈螺栓UDC 621.882.6 | GB 12-88 | 代替GB12-76Cup head square neck bolts－－半圆头带榫螺栓UDC 621.882.6 | GB 13-88 | 代替GB13-76Cup head nid bolts－－大半圆头方颈螺栓C级ISO 8677:1986 | GB 14-1998 | 代替GB14-88Cup head square neck bolts with large head-Product grade C－－大半圆头带榫螺栓UDC 621.882.6 | GB 15-88 | 代替GB15-76Cup head nib bolts with large head－－六角头铰制孔用螺栓UDC 621.882.6 | GB 27-88 | 代替GB27-76Hexagon fit bolts-product grade A and B－－六角头螺杆带孔铰制孔用螺栓UDC 621.882.6 | GB 28-88 | 代替GB28-76Hexagon fit bolts with split pin hole on shank-product grade A and B－－六角头头部带槽螺栓A 和B 级UDC 621.882.6 | GB 29.1-88 | 代替GB29-76 Hexagon bolts with slot on head -product A and B－－十字槽凹穴六角头螺栓UDC 621.882.6 | GB 29.2-88 | 代替GB29-76Cross recessed hexagon bolts with indentation－－六角头螺杆带孔螺栓UDC 621.882.6 | GB 31.1-88 | 代替GB31、23、24-76 Hexagon bolts with split pin hole on shank-product grade A and B－－六角头螺杆带孔螺栓细杆B级UDC 621.882.6 | GB 31.2-88 | 代替GB31、23、24-76 Hexagon bolts with split pin hole on shank-Reduced shank-product grade B－－六角头螺杆带孔螺栓细牙A和B级UDC 621.882.6 | GB 31.3-88 | 代替GB31、23、24-76Hexagon bolts with split pin hole on shank-Fine pitch thread-product grade A and B－－六角头头部带孔螺栓A 和B级UDC 621.882.6 | GB 32.1-88 | 代替GB32、25、26-76 Hexagon bolts with wire holes on head-product grade A and B－－六角头头部带孔螺栓细杆B级UDC 621.882.6 | GB 32.2-88 | 代替GB32、25、26-76 Hexagon bolts with wire holes on head-Reduced shank-product grade B－－六角头头部带孔螺栓细牙A 和 B 级UDC 621.882.6 | GB 32.3-88 | 代替GB32、25、26-76Hexagon bolts with wire holes on head-Fine pitch thread-product grade A and B－－下方头螺栓B级UDC 621.882.6 | GB 35-88 | 代替GB35-76Square head bolts with small head-praduct grade B－－T 形槽用螺栓UDC 621.882.6 | GB 37-88 | 代替GB37-76Bolts for T-Slot－－加强半圆头方颈螺栓GB /T794-93 | 代替GB794-67Strengthened cup head square neck bolts－－活节螺栓UDC 621.882.6 | GB 798-88 | 代替GB798-76Eye bolts－－地脚螺栓UDC 621.882.6 | GB 799-88 | 代替GB799-76Eyelet bolts－－沉头双榫螺UDC 621.882.6 | GB 800-88 | 代替GB800-77Flat countersunk double nib bolts－－小圆半头低方颈螺栓B级ISO 8678:1988 | GB /T 801-1998 | 代替GB801-88Cup head square neck bolts with small head and short neck-product grade B－－六角头螺栓C级ISO 4016:1999 | GB /T 5780-2000 | 代替GB/T 5780-1986 Hexagon head bolts-product grade C－－六角头螺栓全螺纹C级ISO 4018:1999 | GB /T 5781-2000 | 代替GB/T 5781-1986 Hexagon head bolts-Full thread-product grade C－－六角头螺栓ISO 4014：1999 | GB /T 5782-2000 | 代替GB/T 5782-1986Hexagon head bolts－－六角头螺栓全螺纹ISO 4017：1999 | GB /T 5783-2000 | 代替GB/T 5783-1986 Hexagon head bolts-Full thread－－六角头螺栓-细杆-B级UDC 621.882.6 | GB 5784-86 | 代替GB30、21-76Hexagon head bolts-Reduced shank -Product grade B－－六角头螺栓细牙ISO 8765：1999 | GB /T 5785-2000 | 代替GB/T 5785-1986 Hexagon head bolts with fine pitch thread－－六角头螺栓细牙全螺纹ISO 8676：1999 | GB /T 5786-2000 | 代替GB/T 5786-1986 Hexagon head bolts with fine pitch thread-Full thread－－六角法兰面螺栓-加大系列-B级UDC 621.882.6 | GB 5789-86 |Hexagon flange bolts-Heavy series-product grade B－－六角法兰面螺栓-加大系列-细杆-B级UDC 621.882.6 | GB 5790-86 |Hexagon flange bolts-Heavy series-product grade B－－六角法兰面螺栓小系列ISO 4162：1990 | GB /T 16674-1996 | 代替GB/T 5787、5788-1986Hexagon flange bolts-Small series－－钢网架螺栓球节点用高强度螺栓GB /T 16939-1997 |High strength bolts for joints of space grid structures螺柱－－双头螺柱bm=1d UDC 621.882 | GB 897-88 | 代替GB897-76Double end studs-bm=1d－－双头螺柱bm=1.25d UDC 621.882 | GB 898-88 | 代替GB898-76Double end studs-bm=1.25d－－双头螺柱bm=1.5d UDC 621.882 | GB 899-88 | 代替GB899-76Double end studs-bm=1.5d－－双头螺柱bm=2d UDC 621.882 | GB 900-88 | 代替GB900-76Double end studs--bm=2d－－等长双头螺柱B级UDC 621.882 | GB 901-88 | 代替GB901-76Double end studs(clamping type) -Product grade B－－手工焊用焊接螺柱GB 902.1-89 | 代替GB902-76Weld studs for manual welding－－机动弧焊用焊接螺柱GB 902.2-89 | 代替GB902-76Weld studs for arc welding－－储能焊用焊接螺柱GB 902.3-89 | 代替GB902-76Weld studs for capacitor discharge welding－－等长双头螺柱C级UDC 621.882 | GB 953-88 | 代替GB953-76 Double end studs(clamping type)-product grade C－－螺杆GB /T 15389-94 |Threaded rods螺母－－方螺母C级UDC 621.882.3 | GB 39-88 | 代替GB39-76 Square nuts-product grade C－－六角螺母C级ISO 4034：1999 | GB /T41-2000 | 代替GB/T 41-1986 Hexagon nuts-product grade C－－六角厚螺母ISO 621.882.3 | GB 56-88 | 代替GB56-76Hexagon thick nuts－－蝶形螺母UDC 621.882.3 | GB 62-88 | 代替GB62-76Wing nuts－－环形螺母UDC 621.882.3 | GB 63-88 | 代替GB63-76Lifting nuts－－组合式盖形螺母UDC 621.882.3 | GB 802-88 | 代替GB802-76 Acorn nuts－－球面六角螺母UDC 621.882.3 | GB 804-88 | 代替GB804-76 Hexagon nuts with raised face－－扣紧螺母UDC 621.882.3 | GB 805-88 | 代替GB805-76Tight nuts－－滚花高螺母UDC 621.882.3 | GB 806-88 | 代替GB806-76Knurled nut with collar－－滚花薄螺母UDC 621.882.3 | GB 807-88 | 代替GB807-76Knurled nuts－－小六角特扁细牙螺母UDC 621.882.3 | GB 808-88 | 代替GB808-76 Small hexagon thin nuts-Fine pitch thread－－嵌装圆螺母UDC 621.882.3 | GB 809-88 | 代替GB809-76Lnsert round nuts－－小圆螺母UDC 621.882.3 | GB 810-88 | 代替GB810-76Small round nuts－－圆螺母UDC 621.882.3 | GB 812-88 | 代替GB812-76Round nuts－－端面带孔圆螺母UDC 621.882.3 | GB 815-88 | 代替GB815-76 Round nuts with drilled holes in one face－－侧面带孔圆螺母UDC 621.882.3 | GB 816-88 | 代替GB816-79Round nuts with set pin holes in side－－带槽圆螺母UDC 621.882.3 | GB 817-88 | 代替GB817-76Slotted round nuts－－1型非金属嵌件六角锁紧螺母ISO 7040：1997 | GB /T 889.1-2000 | 代替GB/T 889-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 1－－1型非金属嵌件六角锁紧螺母细牙ISO 10512：1997 | GB /T 889.2-2000 |Prevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread－－盖形螺母UDC 621.882.3 | GB 923-88 | 代替GB923-76Acorn nuts－－1型六角螺母ISO 4032：1999 | GB /T 6170-2000 | 代替GB/T 6170-1986Hexagon nuts,style 1－－1型六角螺母细牙ISO 8673：1999 | GB /T 6171-2000 | 代替GB/T 6171-1986 Hexagon nuts,style 1,with fine pitch thread－－六角薄螺母ISO 4035：1999 | GB /T 6172.1-2000 | 代替GB/T 6172-1986Hexagon thin nuts(chamfered)－－非金属嵌件六角锁紧薄螺母ISO 10511：1997 | GB /T 6072.2-2000 |Prevailing torque type hexagon thin nuts(with non-metallic insert)－－六角薄螺母细牙ISO 8675：1999 | GB /T 6173-2000 | 代替GB/T 6173-1986 Hexagon thin nuts(chamfered) with fine pitch thread－－六角薄螺母无倒角ISO 4036：1999 | GB /T 6174-2000 | 代替GB/T 6174-1986 Hexagon thin nuts(unchamfered)－－2型六角螺母ISO 4033：1999 | GB /T 6175-2000 | 代替GB/T 6175-1986Hexagon nuts,style 2－－2型六角螺母细牙ISO 8674：1999 | GB /T 6176-2000 | 代替GB/T 6176-1986 Hexagon nuts,style 2,with fine pitch thread－－六角法兰面螺母ISO 4161：1999 | GB /T 6177.1-2000 | 代替GB/T 6177-1986 Hexagon nuts with flange－－六角法兰面螺母细牙ISO 10663：1999 | GB /T 6177.2-2000 |Hexagon nuts with flange-fine pitch thread－－1型六角开槽螺母-A和B级UDC 621.882.3 | GB 6178-86 | 代替GB57~58-76 Hexagon slotted and castle nuts,style 1 -product grades A and B－－1型六角开槽螺母-C级UDC 621.882.3 | GB 6179-86 | 代替GB57~58-76Hexagon slotted nuts,style 1 -product grade C－－2型六角开槽螺母-A和B级UDC 621.882.3 | GB 6180-86 |Hexagon slotted and castle nuts,style 2 -Product grades A and B－－六角开槽薄螺母-A和B级UDC 621.882.3 | GB 6181-86 | 代替GB59~60-76 Hexagon thin slotted nuts-Product grades A and B－－2型非金属嵌件六角锁紧螺母ISO 7041：1997 | GB /T 6182-2000 | 代替GB/T 6182-1986Prevailing torque type hexagon nuts(with non-metallic insert),style 2－－非金属嵌件六角法兰面锁紧螺母ISO 7043：1997 | GB /T 6183.1-2000 | 代替GB/T 6183-1986Prevailing torque type hexagon nuts with flange(with non-metallic insert)－－非金属嵌件六角法兰面锁紧螺母细牙ISO 12125：1997 | GB /T 6183.2-2000 | Prevailing torque type hexagon nuts with flange(with non-metallic insert)with fine pitch thread－－1型全金属六角锁紧螺母ISO 7719：1997 | GB /T 6184-2000 | 代替GB/T 6184-1986 Prevailing torque type all-metal hexagon nuts,style 1－－2型全金属六角锁紧螺母ISO 7042：1997 | GB /T 6185.1-2000 | 代替GB/T 6185-1986 Prevailing torque type all-metal hexagon nuts,style 2－－2型全金属六角锁紧螺母细牙ISO 10513：1997 | GB /T 6185.2-2000 |Prevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread－－2型全金属六角锁紧螺母9级ISO 7720：1997 | GB /T 6186-2000 | 代替GB/T 6186-1986Prevailing torque type all-metal hexagon nuts,style 2-Property class 9－－全金属六角法兰面锁紧螺母ISO 7044：1997 | GB /T 6187.1-2000 | 代替GB/T 6187-1986Prevailing torque type all-metal hexagon nuts with flange－－全金属六角法兰面锁紧螺母细牙ISO 12126：1997 | GB /T 6187.2-2000 |Prevailing torque type all-metal hexagon nuts with flange with fine pitch thread－－1型六角开槽螺母细牙A和B级UDC 621.882.3 | GB 9457-88 | 代替GB57、58-76 Hexagon slotted and castle nuts,style 1-fine pitch thread-product grades A and B－－2型六角开槽螺母细牙A和B级UDC 621.882.3 | GB 9458-88 |Hexagon slotted and castle nuts,style 2--Fine pitch thread -Product grades A and B－－六角开槽薄螺母细牙A和B级UDC 621.882.3 | GB 9459-88 | 代替GB59、60-76 Hexagon thin slotted nuts--Fine pitch thread -Product grades A and B－－焊接方螺母GB /T 13680-92 |Square weld nuts－－焊接六角螺母GB /T 13681-92 |Hexagon weld nuts－－平头铆螺母GB /T 17880.1-1999 |Flat head riveted nuts－－沉头铆螺母GB /T 17880.2-1999 |Countersunk head riveted nuts－－小沉头铆螺母GB /T 17880.3-1999 |Small countersunk head riveted nuts－－120°小沉头铆螺母GB /T 17880.4-1999 |120°Small countersunk head riveted nuts－－平头六角铆螺母GB /T 17880.5-1999 |Flat head hexagon riveted nuts－－精密机械用六角螺母ISO 4166：1979 | GB /T 18195-2000 |Hexagon nuts for fine mechanics螺钉－－开槽圆柱头螺钉ISO 1207：1992 | GB /T 65-2000 | 代替GB/T 65-1985 Slotted cheese head screws－－开槽盘头螺钉ISO 1580：1994 | GB /T 67-2000 | 代替GB/T 67-1985Slotted pan head screws－－开槽沉头螺钉ISO 2009：1994 | GB /T 68-2000 | 代替GB/T 68-1985Slotted countersunk flat head screws (common head style)－－开槽半沉头螺钉ISO 2010：1994 | GB /T 69-2000 | 代替GB/T 69-1985 Countersunk slotted raised head screws (common head style)－－内六角圆柱头螺钉ISO 4762：1997 | GB /T 70.1-2000 | 代替GB/T 70-1985 Hexagon socket head cap screws－－内六角平圆头螺钉ISO 7380：1997 | GB /T 70.2-2000 |Hexagon socket button head screws－－内六角沉头螺钉ISO 10642：1997 | GB /T 70.3-2000 |Hexagon socket countersunk head screws－－开槽锥端紧定螺钉UDC 621.882.219 | GB 71-85 | 代替GB71-76Slotted set screws with cone point－－开槽锥端定位螺钉UDC 621.882.2 | GB 72-88 | 代替GB72-76Slotted setscrews with cone point－－开槽平端紧定螺钉UDC 621.882.219.4 | GB 73-85 | 代替GB73-76Slotted set screws with flat point－－开槽凹端紧定螺钉UDC 621.882.219.4.092.6 | GB 74-85 | 代替GB74-76Slotted set screws with cup point－－开槽长圆柱端紧定螺钉UDC 621.882.219.4.092.5 | GB 75-85 | 代替GB75-76Slotted set screws with long dog point－－内六角平端紧定螺钉ISO 4026：1993 | GB /T 77-2000 | 代替GB/T 77-1985 Hexagon socket set screws with flat point－－内六角锥端紧定螺钉ISO 4027：1993 | GB /T 78-2000 | 代替GB/T 78-1985 Hexagon socket set screws with cone point－－内六角圆柱端紧定螺钉ISO 4028：1993 | GB /T 79-2000 | 代替GB/T 79-1985 Hexagon socket set screws with dog point－－内六角凹端紧定螺钉ISO 4029：1993 | GB /T 80-2000 | 代替GB/T 80-1985 Hexagon socket set screws with cup point－－方头长圆柱球面端紧定螺钉UDC 621.882.2 | GB 83-88 | 代替GB83-76Square set screws with long dog point and rounded end－－方头凹端紧定螺钉UDC 621.882.2 | GB 84-88 | 代替GB84-76Square set screws with cup point－－方头长圆柱端紧定螺钉UDC 621.882.2 | GB 85-88 | 代替GB85-76Square set screws with long dog point－－方头短圆柱锥端紧定螺钉UDC 621.882.2 | GB 86-88 | 代替GB86-76Square set screws with short dog point and cone end－－十字槽盘头螺钉ISO 7045：1994 | GB /T 818-2000 | 代替GB/T 818-1985Pan head screws with cross recess－－十字槽沉头螺钉第1部分：钢4.8级ISO 7046-1：1994 | GB /T 819.1-2000 | 代替GB/T 819-1985Countersunk flat head screws (common head style)with cross recess-Part 1:Steel of property class 4.8－－十字槽沉头螺钉第2部分：钢8.8、不锈钢A2-70和有色金属CU2或CU3ISO 7046-2：1990 | GB /T 819.2-1997 |Cross recessed countersunk flat head screws (common head style)-Grade A-Part 2:Steel of property class 8.8, stainless and non-ferrous metals－－十字槽半沉头螺钉ISO 7047：1994 | GB /T 820-2000 | 代替GB/T 820-1985 Countersunk raised head screws (common head style) with cross recess－－方头平端紧定螺钉UDC 621.882.2 | GB 821-88 | 代替GB821-76Square set screws with chamfered end－－十字槽圆柱头螺钉ISO 7048：1998 | GB /T 822-2000 | 代替GB/T 822-1988Cheese head screws with cross recess－－十字槽小盘头螺钉UDC 621.882.2 | GB 823-88 | 代替GB823-76Cross recessed small pan head screws－－吊环螺钉UDC 621.882 | GB 825-88 | 代替GB825-76Eyebolts－－开槽盘头定位螺钉UDC 621.882.2 | GB 828-88 | 代替GB828-76Slotted pan head set setscrews with dog point－－开槽圆柱端定位螺钉UDC 621.882.2 | GB 829-88 | 代替GB829-76Slotted setscrews with dog point－－开槽圆柱头轴位螺钉UDC 621.882.2 | GB 830-88 | 代替GB830-76Slotted cheese head screws with shoulder－－开槽无头轴位螺钉UDC 621.882.2 | GB 831-88 | 代替GB831-76Slotted shoulder screws－－开槽带孔球面圆柱头螺钉UDC 621.882.2 | GB 832-88 | 代替GB832-76Slotted capstan screws－－开槽大圆柱头螺钉UDC 621.882.2 | GB 833-88 | 代替GB833-76Slotted large cheese head screws－－滚花高头螺钉UDC 621.882.2 | GB 834-88 | 代替GB834-76Knurled thumb screws－－滚花平头螺钉UDC 621.882.2 | GB 835-88 | 代替GB835-76Knurled screws－－滚花小头螺钉UDC 621.882.2 | GB 836-88 | 代替GB836-76Knurled screws with small head－－开槽盘头不脱出螺钉UDC 621.882.2 | GB 837-88 | 代替GB837-76Slotted pan head screws with waisted shank－－六角头不脱出螺钉UDC 621.882.2 | GB 838-88 | 代替GB838-76Hexagon screws with waisted shank－－滚花头不脱出螺钉UDC 621.882.2 | GB 839-88 | 代替GB839-76Knurled thumb screws with waisted shank－－塑料滚花头螺钉UDC 621.882.2 | GB 840-88 | 代替GB840-79Plastic diamond knurlhead screws－－开槽球面圆柱头轴位螺钉UDC 621.882.2 | GB 946-88 | 代替GB946-76Slotted raised head with shoulder－－开槽球面大圆柱头螺钉UDC 621.882.2 | GB 947-88 | 代替GB947-76Slotted large raised cheese head screws－－开槽沉头不脱出螺钉UDC 621.882.2 | GB 948-88 | 代替GB948-76Slotted countersunk head screws with waisted shank－－开槽半沉头不脱出螺钉UDC 621.882.2 | GB 949-88 | 代替GB949-76Slotted raised countersunk head screws with waisted shank－－内六角花形盘头螺钉UDC 621.882.2 | GB 2672-86 | 代替GB2672-81Hexagon lobular socket pan head screws－－内六角花形沉头螺钉UDC 621.882.2 | GB 2673-86 | 代替GB2673-81Hexagon lobular socket countersunk head screws－－内六角花形半沉头螺钉UDC 621.882.2 | GB 2674-86 | 代替GB2674-81Hexagon lobular socket raised countersunk head screws－－内六角圆柱头轴肩螺钉UDC 621.882.215.6 | GB 5281-85 |Hexagon socket head shoulder screws－－内六角花形圆柱头螺钉-4.8级UDC 621.882.2 | GB 6190-86 | 代替GB2671-81 Hexagon lobular socket head cap screws-property class 4.8－－内六角花形圆柱头螺钉-8.8和10.9级UDC 621.882.2 | GB 6191-86 | 代替GB2671-81 Hexagon lobular socket head cap screws-property class 8.8 and 10.9－－精密机械用紧固件十字槽螺钉GB /T 13806.1-92 |Fasteners for mechanics-Cross recessed screws垫圈－－标准型弹簧垫圈UDC 621.882.4 | GB 93-87 | 代替GB93-76Single coil spring lock washers Normal type－－平垫圈C级ISO 7091：2000 | GB /T 95-2002 | 代替GB/T 95-1985Plain washers-Product grade C－－大垫圈A级ISO 7093-1：2000 | GB /T 96.1-2002 | 代替GB/T 96-1985Plain washers-Large series-Product grade A－－大垫圈C级ISO 7093-2：2000 | GB /T 96.2-2002 | 代替GB/T 96-1985Plain washers-Large series-Product grade C－－平垫圈A级ISO 7089：2000 | GB /T 97.1-2002 | 代替GB/T 97.1-1985Plain washers-Product grade A－－平垫圈倒角型A级ISO 7090：2000 | GB /T 97.2-2002 | 代替GB/T 97.2-1985Plain washers,chamfered-Product grade A－－销轴用平垫圈ISO 8738：1986 | GB /T 97.3-2000 |Plain washers for clevis pins－－平垫圈用于螺钉和垫圈组合件ISO 10673：1998 | GB /T 97.4-2002 | 代替GB/T 9074.24、9074.25-1988Plain washers for screw and washer assemblies－－平垫圈用于自攻螺钉和垫圈组合件ISO 10669：1999 | GB /T 97.5-2002 | 代替GB/T 9074.29、9074.30-1988Plain washers for tapping screw and washer assemblies－－小垫圈A级ISO 7092：2000 | GB /T 848-2002 | 代替GB/T 848-1985Plain washers-small series-Product grade A－－球面垫圈UDC 621.882.4 | GB 849-88 | 代替GB849-76Washers with ball face－－锥面垫圈UDC 621.882.4 | GB 850-88 | 代替GB850-76Washers with cone face－－开口垫圈UDC 621.882.4 | GB 851-88 | 代替GB851-76Washers with split－－工字钢用方斜垫圈UDC 621.882.4 | GB 852-88 | 代替GB852-76Square taper washers for I section－－槽钢用方斜垫圈UDC 621.882.4 | GB 853-88 | 代替GB853-76Square taper washers for slot section－－单耳止动垫圈UDC 621.882.4 | GB 854-88 | 代替GB854-76Tab washers with long tab－－双耳止动垫圈UDC 621.882.4 | GB 855-88 | 代替GB855-76Tab washers with long tab and wing－－外舌止动垫圈UDC 621.882.4 | GB 856-88 | 代替GB856-76External tab washers－－圆螺母用止动垫圈UDC 621.882.4 | GB 858-88 | 代替GB858-76Tab washers for round nut－－轻型弹簧垫圈UDC 621.882.4 | GB 859-87 | 代替GB859-76Single coil spring lock washers,Light type－－鞍形弹性垫圈UDC 621.882.4 | GB 860-87 | 代替GB860-76Curved spring washers－－内齿锁紧垫圈UDC 621.882.4 | GB 861.1-87 | 代替GB861-76Lock washers internal teeth－－内锯齿锁紧垫圈UDC 621.882.4 | GB 861.2-87 |Serrated lock washers internal teeth－－外齿锁紧垫圈UDC 621.882.4 | GB 862.1-87 | 代替GB862-76Lock washers external teeth－－外锯齿锁紧垫圈UDC 621.882.4 | GB 862.2-87 |Serrated lock washers external teeth－－波形弹性垫圈UDC 621.882.4 | GB 955-87 | 代替GB955-76Wave spring washers－－锥形锁紧垫圈UDC 621.882.4 | GB 956.1-87 | 代替GB956-76 Countersunk external toothed lock washers－－锥形锯齿锁紧垫圈UDC 621.882.4 | GB 956.2-87 |Countersunk Serrated external toothed lock washers－－特大垫圈C级ISO 7094：2000 | GB /T 5287-2002 | 代替GB/T 5287-1985 Plain washers-Extra large series-Product grade C－－重型弹簧垫圈UDC 621.882.4 | GB 7244-87 |Single coil spring lock washers,heavy type－－鞍形弹簧垫圈UDC 621.882.4 | GB 7245-87 |Curved Single coil spring lock washers－－波形弹簧垫圈UDC 621.882.4 | GB 7246-87 |Wave Single coil spring lock washers木螺钉－－开槽圆头木螺钉UDC 621.882.2 | GB 99-86 | 代替GB99-76Slotted round head wood screws－－开槽沉头木螺钉UDC 621.882.2 | GB 100-86 | 代替GB100-76Slotted countersunk head wood screws－－开槽半沉头木螺钉UDC 621.882.2 | GB 101-86 | 代替GB101-76Slotted raised countersunk head wood screws－－六角头木螺钉UDC 621.882.2 | GB 102-86 | 代替GB102-76Hexagon head wood screws－－十字槽圆头木螺钉UDC 621.882.2 | GB 950-86 | 代替GB950-76Cross recessed round head wood screws－－十字槽沉头木螺钉UDC 621.882.2 | GB 951-86 | 代替GB951-76Cross recessed countersunk head wood screws－－十字槽半沉头木螺钉UDC 621.882.2 | GB 952-86 | 代替GB952-76Cross recessed raised head countersunk head wood screws自攻螺钉－－十字槽盘头自攻螺钉UDC 621.882.216.5.082.8 | GB 845-85 | 代替GB845-76 Cross recessed pan head tapping screws－－十字槽沉头自攻螺钉UDC 621.882.216.5.082.8 | GB 846-85 | 代替GB846-76 Cross recessed countersunk head tapping screws－－十字槽半沉头自攻螺钉UDC 621.882.216.5.082.8 | GB 847-85 | 代替GB847-76 Cross recessed raised countersunk head tapping screws－－开槽盘头自攻螺钉UDC 621.882.215.082.8 | GB 5282-85 |Slotted pan head tapping screws－－开槽沉头自攻螺钉UDC 621.882.215.082.8 | GB 5283-85 |Slotted countersunkhead tapping screws－－开槽半沉头自攻螺钉UDC 621.882.215.082.8 | GB 5284-85 |Slotted raised countersunkhead tapping screws－－六角头自攻螺钉UDC 621.882.215.082.8 | GB 5285-85 |Hexagon head tapping screws－－十字槽盘头自攻锁紧螺钉UDC 621.882 | GB 6560-86 |Cross recessed pan head thread forming screws－－十字槽沉头自攻锁紧螺钉UDC 621.882 | GB 6561-86 |Cross recessed countersunk head thread forming screws－－十字槽半沉头自攻锁紧螺钉UDC 621.882 | GB 6562-86 |Cross recessed raised countersunk head thread forming screws－－六角头自攻锁紧螺钉UDC 621.882 | GB 6563-86 |Hexagon head thread forming screws－－内六角花形圆柱头自攻锁紧螺钉UDC 621.882 | GB 6564-86 |Hexagon lobular socket thread forming screws－－十字槽头凹穴六角头自攻螺钉UDC 621.882.2 | GB 9456-88 |Cross recessed hexagon head tapping screws with indentation－－精密机械用紧固件十字槽自攻螺钉刮削端GB /T 13806.2-92 |Fasteners for fine mechanics-Cross recessed tapping screws-Scrape point－－墙板自攻螺钉GB /T 14210-93 |Dry wall screws－－十字槽盘头自钻自攻螺钉ISO 15481:1999 | GB /T 15856.1-2002 | 代替GB/T 15856.1-1995Cross recessed pan head drilling screws with tapping screw thread－－十字槽沉头自钻自攻螺钉ISO 15482:1999 | GB /T 15856.2-2002 | 代替GB/T 15856.2-1995Cross recessed countersunk head drilling screws with tapping screw thread－－十字槽半沉头自钻自攻螺钉ISO 15483:1999 | GB /T 15856.3-2002 | 代替GB/T 15856.3-1995Cross recessed raised countersunk head drilling screws with tapping screw thread－－六角法兰面自钻自攻螺钉GB /T 15856.4-2002 | 代替GB/T 15856.4-1995Hexagon flange drilling screws with tapping screw thread－－六角凸缘自钻自攻螺钉ISO 15480:1999 | GB /T 15856.5-2002 |Hexagon washer head drilling screws with tapping screw thread－－六角凸缘自攻螺钉ISO 7053:1992 | GB /T 16824.1-1997 |Hexzgon head tapping screws with collar－－六角法兰面自攻螺钉ISO 10509:1992 | GB /T 16824.2-1997 |Hexagon flange head tapping screws销－－开口销ISO 1234:1997 | GB /T 91-2000 | 代替GB/T 91-1986Split pins－－圆锥销ISO 2339:1986 | GB /T 117-2000 | 代替GB/T 117-1996Taper pins－－内螺纹圆锥销ISO 8736:1986 | GB /T 118-2000 | 代替GB?T 118-1996Taper pins with internal thread－－圆柱销不淬硬钢和奥氏体不锈钢ISO 2338:1997 | GB /T 119.1-2000 | 代替GB/T 119-1986Parallel pins,of unhardened steel and austenitic stainless steel－－圆柱销淬硬钢和马氏体不锈钢ISO 8734:1997 | GB /T 119.2-2000 | 代替GB/T 119-1986Parallel pins,of hardened steel and martensitic stainless steel (Dowel pins)－－内螺纹圆柱销不淬硬钢和奥氏体不锈钢ISO 8733:1997 | GB /T 120.1-2000 | 代替GB/T 120-1986Parallel pins with internal thread, of unhardened steel and austenitic stainless steel－－内螺纹圆柱销淬硬钢和马氏体不锈钢ISO 8735:1997 | GB /T 120.2-2000 | 代替GB/T 120-1986Parallel pins with internal thread,of hardened steel and martensitic stainless steel－－开尾圆锥销UDC 621.886 | GB 877-76 | 代替GB877-76Taper pins with split－－螺纹圆柱销UDC 621.886 | GB 878-86 | 代替GB878-76Parallel pins with external thread－－弹性圆柱销直槽重型ISO 8752:1997 | GB /T 879.1-2000 | 代替GB/T 879-1986 Spring-type straight pins-Slotted, heavy duty－－弹性圆柱销直槽轻型ISO 13337:1997 | GB /T 879.2-2000 |Spring-type straight pins-Slotted,light duty－－弹性圆柱销卷制重型ISO 8748:1997 | GB /T 879.3-2000 |Spring-type straight pins-Coiled,heavy duty－－弹性圆柱销卷制标准型ISO 8750:1997 | GB /T 879.4-2000 |Spring-type straight pins-Coiled,standard duty－－弹性圆柱销卷制轻型ISO 8751:1997 | GB /T 879.5-2000 |Spring-type straight pins-Coiled,light duty－－带孔销UDC 621.886 | GB 880-86 | 代替GB880-76Pins with split pin hole－－螺尾锥销ISO 8737:1986 | GB /T 881-2000 | 代替GB/T 881-1986Taper pins with external thread－－销轴UDC 621.886 | GB 882-86 | 代替GB882-76Clevis pins with head－－槽销平行沟槽GB /T 13829.1-92 |Crooved pins-Parallel grooved－－槽销锥销GB /T 13829.2-92 |Crooved pins-taper grooved－－槽销圆头沉头GB /T 13829.3-92 |Grooved pins-with round head or countersunk head铆钉－－平头铆钉UDC 621.884 | GB 109-86 | 代替GB109-76Flat head rivets－－标牌铆钉UDC 621.884 | GB 827-86 | 代替GB827-76Rivets for name plate－－半圆头铆钉(粗制)UDC 621.884 | GB 863.1-86 | 代替GB863-76Round head rivets-Black－－小半圆头铆钉(粗制)UDC 621.884 | GB 863.2-86 |Round head rivets with small head-Black－－平锥头铆钉(粗制)UDC 621.884 | GB 864-86 | 代替GB864-76Cone head rivets-Black－－沉头铆钉(粗制)UDC 621.884 | GB 865-86 | 代替GB865-86Countersunk head rivets-Black－－半沉头铆钉(粗制)UDC 621.884 | GB 866-86 | 代替GB866-76Oval countersunk head rivets-Black－－半圆头铆钉UDC 621.884 | GB 867-86 | 代替GB867-76Round head rivets－－平锥头铆钉UDC 621.884 | GB 868-86 | 代替GB868-76Cone head rivets－－沉头铆钉UDC 621.884 | GB 869-86 | 代替GB869-76 Countersunk head rivets－－半沉头铆钉UDC 621.884 | GB 870-86 | 代替GB870-76Oval countersunk head rivets－－扁圆头铆钉UDC 621.884 | GB 871-86 | 代替GB871-76Flat round head rivets－－扁平头铆钉UDC 621.884 | GB 872-86 | 代替GB872-76Thin head rivets－－扁圆头半空心铆钉UDC 621.884 | GB 873-86 | 代替GB873-76 Oval head semi-tubular rivets－－120°沉头半空心铆钉UDC 621.884 | GB 874-86 | 代替GB874-76 120 degree countersunk head semi-tubular rivets－－扁平头半空心铆钉UDC 621.884 | GB 875-86 | 代替GB875-76 Thin head semi-tubular rivets－－空心铆钉UDC 621.884 | GB 876-86 | 代替GB876-76Tubular rivets－－120°沉头铆钉UDC 621.884 | GB 954-86 | 代替GB954-76120 degree countersunk head rivets－－管状铆钉UDC 621.884 | GB 975-86 | 代替GB975-76Pipe type rivets－－大扁圆头铆钉UDC 621.884 | GB 1011-86 | 代替GB1011-76 Truss head rivets－－120°半沉头铆钉UDC 621.884 | GB 1012-86 | 代替GB1012-76 120 degree oval countersunk rivets－－平锥头半空心铆钉UDC 621.884 | GB 1013-86 | 代替GB1013-76 Cone head semi-tubler rivets－－大扁圆头半空心铆钉UDC 621.884 | GB 1014-86 | 代替GB1014-76 Truss head semi-tublar rivets－－沉头半空心铆钉UDC 621.884 | GB 1015-86 | 代替GB1015-76 Countersunk head semi-tublar rivets－－无头铆钉UDC 621.884 | GB 1016-86 | 代替GB1016-76 Headless rivets－－封闭型扁圆头抽芯铆钉GB 12615-90 |Mushroom head break mandrel closed end blind rivets－－封闭型沉头抽芯铆钉GB 12616-90 |120 deg flush head break mandrel closed end blind rivets－－开口型沉头抽芯铆钉GB 12617-90 |120 deg flush head break mandrel blind rivets－－开口型扁圆头抽芯铆钉GB 12618-90 |Mushroom head break mandrel blind rivets－－扁圆头击芯铆钉GB /T 15855.1-1995 |Flat round head drive rivets－－沉头击芯铆钉GB /T 15855.2-1995 |Countersunk head drive rivets挡圈－－锥销锁紧挡圈UDC 621.885 | GB 883-86 | 代替GB883-76Lock rings with cone pin－－螺钉锁紧挡圈UDC 621.885 | GB 884-86 | 代替GB884-76Lock ring with screw－－带锁圈的螺钉锁紧挡圈UDC 621.885 | GB 885-86 | 代替GB885-76 Lock rings with screw and circlip－－轴肩挡圈UDC 621.885 | GB 886-86 | 代替GB886-76Rings for shoulder－－螺钉紧固轴端挡圈UDC 621.885 | GB 891-86 | 代替GB891-76Lock rings at the end of shaft with screw－－螺栓紧固轴端挡圈UDC 621.885 | GB 892-86 | 代替GB892-76Lock rings at the end of shaft with bolt－－孔用弹性挡圈-A型UDC 621.885 | GB 893.1-86 | 代替GB893-76 Circlips for holes-type A－－孔用弹性挡圈-B型UDC 621.885 | GB 893.2-86 |Circlips for hole-type B－－轴用弹性挡圈-A型UDC 621.885 | GB 894.1-86 | 代替GB894-76 Circlips for shaft-type A－－轴用弹性挡圈-B型UDC 621.885 | GB 894.2-86 |Circlips for shaft-type B－－孔用钢丝挡圈UDC 621.885 | GB 895.1-86 | 代替GB895-76 Roundwire snap rings for hole－－轴用钢丝挡圈UDC 621.885 | GB 895.2-86 | 代替GB895-76 Roundwire snap rings for shaft－－开口挡圈UDC 621.885 | GB 896-86 | 代替GB896-76“E”rings－－钢丝锁圈UDC 621.885 | GB 921-86 | 代替GB921-76Round wire circlips－－夹紧挡圈UDC 621.885 | GB 960-86 | 代替GB960-76Grip rings紧固件-组合件和连接副－－钢结构用高强度大六角头螺栓GB /T 1228-91 | 代替GB1228-84 High strength bolts with large hexagon head for steel structures－－钢结构用高强度大六角头螺母GB /T 1229-91 | 代替GB1229-84High strength large hexagon nuts for steel structures－－钢结构用高强度垫圈GB /T 1230-91 | 代替GB1230-84High strength plain washers for steel structures－－钢结构用扭剪型高强度螺栓连接副GB /T 3632-1995 | 代替GB3632-83Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures－－螺栓或螺钉和平垫圈组合件ISO 10644：1998 | GB /T 9074.1-2002 | 代替GB/T 9074.1、9074.14-1988Bolt or screw and washer assemblies with plain washers－－十字槽头螺钉和外锯齿锁紧垫圈组合件UDC 621.882 | GB 9074.2-88 |Cross recessed pan head screw and serrated lock washer external teeth assemblies－－十字槽盘头螺钉和弹簧垫圈组合件UDC 621.882 | GB 9074.3-88 |Cross recessed pan head screw and single coll spring lock washer assemblies－－十字槽盘头螺钉、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.4-88 |Cross recessed pan head screw, single coil spring lock washer assemblies－－十字槽小盘头螺钉和平垫圈组合件UDC 621.882 | GB 9074.5-88 |Cross recessed small pan head screw and small plain washer assemblies－－十字槽小盘头螺钉和大垫圈组合件UDC 621.882 | GB 9074.6-88 |Cross recessed small pan head screw and big plain washer assemblies－－十字槽小盘头螺钉和弹簧垫圈组合件UDC 621.882 | GB 9074.7-88 |Cross recessed small pan head screw and single coil spring lock washer assemblies－－十字槽小盘头螺钉、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.8-88 |Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies －－十字槽沉头螺钉和锥形锁紧垫圈组合件UDC 621.882 | GB 9074.9-88 |Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies－－十字槽半沉头螺钉和锥形锁紧垫圈组合件UDC 621.882 | GB 9074.10-88 |Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies－－十字槽凹穴六角头螺栓和平垫圈组合件UDC 621.882 | GB 9074.11-88 |Cross recessed hexagon bolt with indentation and plain washer assemblies－－十字槽凹穴六角头螺栓和弹簧垫圈组合件UDC 621.882 | GB 9074.12-88 |Cross recessed hexagon bolt with indetation single coil spring lock washer assemblies－－十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.13-88 | Cross recessed hexagon bolt with indetation,single coil lock washer and plain washer assemblies －－六角头螺栓和弹簧垫圈组合件UDC 621.882 | GB 9074.15-88 |Hexagon head bolt and single coil spring lock washer assemblies－－六角头螺栓和外锯齿锁紧垫圈组合件UDC 621.882 | GB 9074.16-88 |Hexagon head bolt and serrated lock washer external teeth assemblies－－六角头螺栓、弹簧垫圈和平垫圈组合件UDC 621.882 | GB 9074.17-88 |Hexagon head bolt,single coil spring lock washer and plain washer assemblies－－自攻螺钉和平垫圈组合件ISO 10510：1999 | GB /T 9074.18-2002 | 代替GB/T 9074.18、9074.19、9074、22、9074、23-1988Tapping screw and washer assemblies with plain washers－－十字槽凹穴六角头自攻螺钉和平垫圈组合件UDC 621.882 | GB 9074.20-88 |Cross recessed hexagon head tapping screw with indentation and plain washer assemblies－－十字槽凹穴六角头自攻螺钉和大垫圈组合件UDC 621.882 | GB 9074.21-88 |Cross recessed hexagon head tapping sorew with indentation and large plain washer assemblies。
紧固件中英文对照
Description in Chinese 英文品名Desciption in English圆锥销Taper pins圆柱销Parallel pins开槽圆柱头螺钉Slotted cheese head screws开槽盘头螺钉Slotted pan head screws单耳止动垫圈Tab washers开口销Split cooter pins开槽半沉头木螺钉Slotted raised csk head wood screws 开槽半圆头木螺钉Slotted round head wood screws开槽沉头木螺钉Slotted countersunk head wood screws 平垫Plain washers平垫（带倒角）Mediun washers平垫Plain washers重型弹垫Spring lock washers,tang ends标准弹垫Spring lock washers,square ends鞍形弹垫Single coil spring lock washers弹簧止动垫圈Curved spring washers波形弹垫Wave spring washersT型方颈螺栓T-head blots with square neckT型双接头螺栓T-head bolts with double nip螺纹圆锥销Taper pins with threaded endT型头螺栓T-head bolts蝶型螺母（美制）Wing nuts America form蝶型螺母（德制）Wing nuts germany form蝶型螺母（美制）Wing screws America form蝶型螺母（德制）Wing screws germany form圆球型盖型螺母Ball knobs开槽带孔球面圆柱头蚴钉Slotted capstan screws开槽长圆柱端紧定螺钉Slotted set srews with full dog point开槽平端紧定螺钉（半牙）Slotted set srews with chamfered end 小六角特薄细牙螺母Pip nuts with thread外舌止动垫圈External tap小垫圈(用于圆柱头螺钉) Washers for cheese head screws方斜垫圈（U型）Square taper washers forU-section方斜垫圈（I型）Square taper washers forI-sections方垫圈Square washers开槽凹端紧定螺钉Slotted set with cup point六角薄螺母Hexagon thin nuts细牙六角薄螺母Hexagon thin nuts木螺钉专用垫圈Rounds washers for wood constructions密封帽Sealing caps,push-in type活节螺栓B型Eye bolts form B内舌止动垫圈Internal tab washers双耳止动垫圈Washers with two taps滚花高头螺钉Knurled thumb screws with collar开槽滚花高头螺钉Slotted knurled thumb screws with collar 滚花高螺母Knurled thumb nuts with collar滚花薄螺母Knurled thumb thin nuts锁紧垫圈Sealing washers轴用弹性垫圈Retaining rings for shafts(external),circlips孔用弹性垫圈Retaining rings for bores(internal),circlips方头带垫螺栓Square head bolts with collar方头圆柱底端螺栓Square head bolts with half dog point方头带垫关圆底端螺栓Square head bolts with collar,half dog pointT型槽螺母T-slot nuts单头螺柱Single end studs地脚螺栓Masonry bolts带槽圆螺母Slotted round nuts端面带孔圆螺母Round nuts with drilled holes in one face 开槽平端紧定螺钉Slotted set screws with flat point开槽锥端紧定螺钉Slotted set screws with cone point六角螺母Hexagon nuts方螺母-C Square nuts六角头螺钉Hexagon screws六角头圆柱端紧定螺钉Hexagon set screws with full dog point薄型方螺母-B Square nuts without bevel(pressed nuts)六角头木螺钉Hexgon head wood screw(coach screws)吊环螺钉Lifting eye bolts吊环螺母Lifting eye nuts圆锥型槽销Grooved pins,taper grooved圆锥型槽销（半槽）Grooved pins,taper grooved half length平行槽销（带倒角）Grooved pins,parallel grooved full length前端凹槽槽销Grooved pins,reverve grooved half length中部凹槽槽销Grooved pins,center grooved圆头槽销Grooved pins with round head沉头槽销Grooved pins with countersunk head六角螺母棒Turnuckles(center parts),made out of hexagon bar花蓝螺栓Turnuckles with eye bolt and hook bolt弹性圆柱销Spring pins,heavy type组合式盖型螺母Hexagon domed cap nuts开槽圆螺母(配合沟头扳手) Slotted round nuts for hook spammer圆螺母（带插销孔）Round nuts with set holes盘型弹簧垫圈Disc springs喉箍Hose clamps润滑油嘴（旋扭头）Lubricating nipples,button head管夹Shackles for conduiltsU型螺栓Stirrup bolts(U-bolts)球面垫圈Spherical washers,conical seats圆柱销Parallel pins厚六角螺母Hexagon nuts,1.5d厚六角法兰面螺母Hexagon nuts,1.5d with collar长六角螺母Hexagon nuts,3d外齿锁紧垫圈External teeth lock washers内齿锁紧垫圈Internal teeth lock washers外锯齿锁紧垫圈External teeth serrated lock washers内锯齿锁紧垫圈Internal teeth serrated lock washers开口挡圈Retaining rings for shafts(E-rings),circlips平键（A型）Parallel keys(form A)半圆键Woodruff keys嵌环（支撑环）Thimbles机器螺钉和垫圈组合件Screws and washers assemblies自攻螺钉和垫圈组合件Tapping screws and washer assemblies薄型带孔内六角圆柱螺钉Hexagon cocket head cap screws with hole,low head大六角头螺栓Hexagon head bolts with large head(friction grip nolts)大六角螺母Hexagon nuts with large wideth across flat(friction grip nuts)大垫圈Round washers for friction grip bolts楔型方垫圈Spuare taper washers for friction grip bolts on T-六角法兰面螺母Hexagon flange nuts全金属六角锁紧螺母（2型）Prevailing torque type hexagon nuts,all metallic nuts 轻型弹性圆柱销Spring pins,light type重型弹性圆柱销用垫圈Washers for bolts with heavy type spring pinssISO公制螺纹螺钉（多种头型）Thread forming screws for ISO-metric thread 自攻自钻螺钉（多种头型）Self-drilling tapping screws开槽切削螺纹螺钉（多种头型）Thread cutting screws十字槽切削螺纹螺钉（多种头型）Thread cutting screws cross recessT型四爪螺母Tee nuts with pronge钢结构用六角头螺栓连接副Hexagon head fitted bolts for steel structures开槽盘头自攻螺钉Pan head tapping screws with slot开槽沉头自攻螺钉countersunk flat head tapping screws with slot开槽半沉头自攻螺钉Raised sountersunk oval head tapping screws with slot六角头自攻螺钉Hexagon tapping screws圆柱头螺钉用弹簧垫圈Spring lock washers for screws with cylindrical heads十字槽盘头自攻螺攻Pan head tapping screws with cross recessed十字槽沉头自攻螺攻Countersunk flat head tapping screws with cross recessed十字槽半沉头自攻螺攻Raised countersunk oval head tapping screws with cross薄型内六角圆柱头螺钉Hexagon socket head cap screws with,reduced head十字槽盘头螺钉Pan head screws with cross recessed钢结构用垫圈Washers for steel structures钢结构用六角头螺栓Hexagon head bolts for steel structures内六角沉头螺钉Hexagon socket coutersunk head screws轴用钢丝挡圈Roundwire snap rings for shafts十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws十字槽圆头木螺钉Cross recessed round head wood screws十字槽沉头木螺钉Cross recessed countersunk head wood screws螺纹护套(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking大外径垫圈Washers,outside diameter appro.3d弹簧卡子sping cotter for a bolt平板螺栓Belting bolts(elevator bolts)干壁钉（墙板钉）Dry wall screws环型螺母Lifting nuts(eye nuts)圆螺母用止退垫圈Tab washer for slotted round nuts。
紧固件中英文对照
最全紧固件中英文对照，外贸必备词典！一、紧固件 Fasteners标准紧固件 Standard Fasteners非标准紧固件 Nonstandard Fasteners特殊紧固件 Special Fasteners汽车紧固件 Automotive Fasteners铜制紧固件 Brass Fasteners航天用紧固件 Aerospace Fasteners精密紧固件 Precision Fasteners化学紧固件 Chemical Fasteners摩托车紧固件 Motorcycle Fasteners不锈钢紧固件 Stainless Steel Fasteners铁道紧固件 Railway Fasteners防松紧固件 Self-locking Fasteners高强度紧固件 High strength FastenersPEM紧固件 PEM Fasteners钢结构紧固件 Steel Structural Fasteners压铆紧固件 Self-Clinching Fasteners铝制紧固件 Aluminum Fasteners钛合金紧固件 Titanium Alloy Fasteners尼龙紧固件 Nylon Fasteners精制紧固件 Finished Fastener粗制紧固件 Unfinished Fastener螺纹紧固件 Threaded Fastener半精制紧固件 Semi-Finished Fastener抗剪紧固件 Shear Fastener抗拉紧固件 Tension Fastener面板紧固件 Panel Fasteners二、螺栓 Bolts六角头螺栓Hexagon Head Bolts六角法兰面螺栓Hexagon Flange Bolts轨道螺栓（鱼尾螺丝）Track Bolts高强度螺栓 High Strength Bolts地脚螺栓Eyelet Bolts马车螺栓 Carriage Bolts护拦螺栓 Guardrail Bots焊接螺栓 Weld Bolts双头螺栓 Double End Bolts钢结构连接副 Structural Bolting内六角螺栓 Hex Socket Bolts合金钢螺栓 Alloy Steel Bolts方头螺栓 Square Head Bolts/Square Bolts钩头螺栓 Hook Bolts不锈钢螺栓 Stainless steel Bolts异型螺栓 Special Bolts吊环螺栓 Lifting Eye Bolts汽车螺栓 Automotive Bolts法兰螺栓 Flange Bolts轮胎螺栓 Wheel BoltsT型螺栓 T Bolts扁头螺栓 Pan Head Bolts蝶形螺栓 Wing Bolts沉头螺栓 Countersunk Bolts沉头方颈螺栓 Countersunk Square Neck Bolts带榫螺栓 Cup head Nib Bolts沉头双榫螺栓 Flat Countersunk Double Nib Bolts活节螺栓 Eye Bolts压铆螺栓 Clinching Bolts红打螺栓 Hot Forging Bolts圆头螺栓 Round Head Bolts圆头方颈螺栓 Round Head Square Neck Bolts圆头双榫螺栓 Round Head Fin Neck Bolts米制圆头方颈螺栓 Metric Round Head Square Neck BoltsT型带孔螺栓 T bolts withHole六角头铰制孔用螺栓 Hexagon Fit Bolts六角头螺杆带孔螺栓 Hexagon Bolts with split pin hole on shank钢网架螺栓球节点用高强度螺栓 High Strength Bolts for joints ofspace grid structures 基础螺栓 Foundation BoltsU型螺栓 U Bolts高张力螺栓 High Strength Bolts大尺寸螺栓 Big Size Bolts螺椿栓 Stud Bolts拉栓 Blind Bolts重型六角头螺栓 Heavy Hex Bolts大头马车螺栓 Step Bolts扭矩控制螺栓 . Bolts蛋形颈轨道用螺栓 Elliptic Neck Track Bolts调节螺栓，调节螺钉 Pitch-Adjustable Bolts and Screws加长非标双头螺栓 Lengthen Non-Standard Stud Bolts电梯膨胀螺栓 Elevator Expansion Bolts三、螺钉 Screws?六角螺钉Hex Head Cap Screws/Hex Screws六角机械螺钉 Hex Head Machine Bolts六角法兰螺钉 Hex Flange Screws内六角孔螺丝 Hex Socket Cap Screws内六角沉头螺钉 Hex Socket Flat Countersunk Head Cap Screws紧定螺钉/固定螺钉 Set Screws止付螺钉Socket Set Screws方头紧定螺钉 Square Head Slotted Head Set Screws翼形螺钉/蝶形螺钉 Wing Screws精密螺钉 Precision Screws自攻螺钉 Self-Tapping Screws自削螺钉 Thread Cutting Screws钻尾螺钉 Self-Drilling Screws旋入螺钉 Drive Screws机械螺钉 Machine Screws木螺钉 Wood Screws家具螺钉 Furniture Screws纤维板钉/塑板螺钉 Chipboard Screws墙用螺钉 Drywall Screws剪力钉(焊接螺钉) Welding Studs螺丝附华司组合 Screws And Washers Assembled (Sems)铜螺钉 Brass Screws铝螺钉 Aluminum Screws合金钢螺钉 Alloy Steel Screws组合螺钉 SEM screws电子螺钉 Electronic Screws微小精密螺钉 Micro Screws塑料螺钉 Plastic Screws复合材料用螺钉 Particle Board Screws钛合金螺钉 Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料 Ti ,Zr ,Mo, Nb Pare Metal Bolts Parts 拇指螺丝 Thumb Screws飞机特殊扣件 Source Control Bolts电梯螺钉 Elevator Screws四角头固定螺钉 Square Set Screws单向螺钉 One Way Lag Screws管夹螺钉 Hose Clamp Screws不锈钢固定螺钉 Stainless Steel Hex Socket Cap Screws不锈钢内六角螺钉 Stainless Steel Hex Socket Cap Screws铰链螺钉 Hinge Screws货柜螺钉 Container Screws复合材料钻尾螺钉 Bi-Metal Self Drilling Screws三角牙螺钉 Tri-lobular Thread Screws高低牙螺钉 High Low Screws夹板用螺钉 Particle Board Screws马桶螺钉 Toilet Closet Bolts特长螺钉 Special Longer Screws建业螺钉 Building Fasteners不锈钢六角螺丝 Stainless Steel Hex Socket Cap Screws不锈钢特殊螺钉 Special Stainless Steel Screws宽牙螺钉（粗牙螺钉） Coarse Thread Screws链带螺钉 Collated Screws水泥螺钉 Concrete Screws板模螺钉 Construction Bolts锌蝶螺钉 Die Cast Wing Screws; Zinc Alloy重型车钉 Heavy Duty Wheel Hub Bolts内六角固定螺钉 Hex Socket Set Screws复合材料用螺钉（夹板用） Particle Board Screws犁壁螺钉 Plow Bolts不锈钢木螺丝 Stainless Steel Wood Screws套挂螺栓及螺钉 Toggle Bolts钛合金膨胀螺钉 Titanium Alloy Expansion Bolts不锈钢高低牙螺钉 Stainless Steel High-Low Thread Screws不锈钢机械螺钉 Stainless Steel Machine Screws不锈钢钻尾螺钉 Stainless Steel Self Drilling Screws不锈钢自攻螺钉 Stainless Steel Self Tapping Screws不锈钢自削螺钉 Stainless Steel Thread Cutting Screws不锈钢三角牙螺钉 Stainless Steel Tri-Lobular Thread Screws 不锈钢宽牙螺钉 Stainless Steel Coarse Thread Screws开槽沉头螺钉 Slotted Flat Countersunk Head Machine Screws 开槽盘头螺钉 Slotted Pan Head Machine Screws十字槽盘头螺钉 Cross Recessed Pan Head Machine Screws 滚花头台阶螺钉 Knurled Thurmb Screws六角头木螺钉 Hexagon Head Wood Screws平头滚花螺钉 Knurled Thin Thumb Screws?四、螺母/螺帽 Nuts六角螺母 Hexagon Nuts六角盖形螺母 Hex Cap Nuts六角锯齿螺母 Hex Serrated Nuts六角法兰螺母 Hex Flange Nuts六角平面螺母 Hex Flat Nuts六角厚螺母Hex Thick Nuts重型六角开槽螺母 Heavy Hexagon Slotted Nuts高脚螺母 Hex Coupling Nuts (High Nuts)圆螺母 Round Nuts四角螺母/四方螺母 Square Nuts四方焊接螺母 Square Weld Nuts四爪螺母Four-Claw Nuts管用螺母 Pipe Nuts轮壳螺母 Wheel Nuts蝶型螺母 Wing NutsU形螺母 U NutsT形螺母 T Nuts环首螺母 Eye Nuts齿形螺母 Kep Nuts齿花螺母 Clinch Nuts焊接螺帽 Weld Nuts压铆螺母 Self-clinching Nuts高张力螺母 High Strength Nuts建业用螺母 Structural Nuts不锈钢螺母 Stainless Steel Nuts铜螺母 Brass Nuts铝螺母 Aluminum Nuts合金钢螺母 Alloy Steel Nuts重型车螺母 Heavy Duty Wheel Hub Nuts铁器焊接袋帽 Acorn Cap Nuts金属预置扭矩式螺母 All-Metal Prevailing Torque Type Nuts壁虎螺母 Anchor Nuts大尺寸螺母 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺母 Conical Washer Nuts铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts法兰尼龙盖帽 Flange Nylon Insert Lock Nuts平面华司螺母 Flat Washer Nuts六角割沟螺母 Hex Slotted Nuts自锁螺母 Self-Locking Nuts制止螺母 Sliding NutsSLN-自动防松螺母 SLN Self-Locking Nuts特殊螺母 Special Nuts弹簧螺母 Spring Nuts不锈钢法兰螺母 Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺母 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺母 Stainless Steel Heavy Hex Nuts不锈钢六角螺母 Stainless Steel Hex Nuts不锈钢尼龙嵌入螺母 Stainless Steel Nylon Insert Lock Nuts普通六角螺母 Hex Nuts六角重型螺母 Heavy Hex Nuts薄型螺母 Hex Jam Nuts尼龙嵌入防松螺母 Nylon Insert Lock Nuts尼龙锁紧螺母Nylon Cage Nuts机械螺丝用六角螺母 Hex Machine Screw Nuts米制六角开槽螺母 Metric Slotted Hex Nuts轨道螺栓用方螺母 Track Bolt Nuts米制六角金属锁紧螺母 Prevalling Torque Hexagon Nuts开槽螺母Slotted Round Nuts六角开槽薄螺母Hexagon Slotted Thin Nuts?五、螺柱 Studs?压铆螺柱 Self-Clinching Studs铜螺柱 Brass Studs焊接螺柱 Weld Studs双头螺柱 Double End Studs六角螺柱 Hex Studs支撑卡柱 Self-Clinching Standoffs?六、垫圈 Washers弹簧垫圈 Spring Washers/Spring Lock Washers宽型弹簧垫圈 Extra-duty Helical Spring Lock Washers杯型垫圈 Cup washers波形垫圈 Wave Washers内齿垫圈 Internal Tooth Washers外齿垫圈 External Tooth Washers铜垫圈 Copper Washers方垫圈 Square Washers密封垫圈 Sealing Washers碟形弹簧垫圈 Disc Spring Washers外舌止动垫圈External Tab Washers高强度垫圈 High strengthen washers橡胶垫圈 Rubber Washers锁紧垫圈 Lock Washers平垫圈 Plain Washers鞍型弹性垫圈 Curved Spring Washers锯齿锁紧弹性垫圈 Toothed lock washers外锯齿锁紧垫圈 Serrated Lock Washers锥形垫圈 Taper Washers重型弹簧垫圈 Heavy Spring Lock Washers尼龙垫圈 Nylon Washers淬硬钢垫圈 Hardened Steel Washers?七、铆钉 Rivets?平头铆钉 Flat Head Rivets击芯铆钉 Drive Rivets彩色铆钉 Colored Rivets沉头铆钉 Countersunk Head Rivets半沉头铆钉 Oval Countersunk Head Rivets平锥头铆钉 Cone Head Rivets抽芯铆钉 Blind Rivets开口铆钉 Split Rivets开口型抽芯铆钉 Open End Blind Rivets拉铆钉 Pop Rivets封闭铆钉Closed End Rivets封闭性抽芯铆钉 Sealed Type Blind Rivets塑料铆钉 Plastic Rivets空心铆钉 Tubular Rivets环槽铆钉 Ring Groove Rivets单鼓型铆钉 Single-Grip Rivets圆头铆钉 Round Head Rivets高沉头铆钉 Countersunk Head Rivets铝铆钉 Aluminum Rivets实心铆钉 Solid Rivets沉头实心铆钉 Countersunk Head Solid Rivets灯笼铆钉 Lantern Blind Rivets半空心铆钉 Semi-Tubular Rivets圆头半空心铆钉 Semi-tubular Pan Head Rivets异型铆钉 Special Rivets不锈钢铆钉 Stainless Steel Rivets双鼓型铆钉 Multi-grip Rivets高强度铆钉 High Strength Rivets台阶铆钉 Step Rivets面板铆钉 Tablet Rivets开花型抽芯铆钉 Flowering Blind Rivets拉花型抽芯铆钉 Peel Type Blind Rivets沟槽型抽芯铆钉 Grooved Type Blind Rivet铆接工具 Riveting Tool?八、壁虎（膨胀螺栓）Anchors/Expansion Bolts化学锚栓 Chemical Anchors打入式壁虎 Hammer Drive Anchors内迫壁虎 Drop in Anchors重型壁虎 Heavy Duty Anchors锤钉壁虎 Hit Anchors中空壁虎 Hollow Wall Anchors套管壁虎 Sleeve Anchors插片壁虎 Ceiling Anchors门窗、地板专用壁虎 Nylon Frame Anchors or Metal frame Anchors电梯壁虎 Bolt Anchors车修壁虎 Wedge Anchors鱼眼壁虎 Tie Wire Anchors外迫壁虎 Cut Anchors塑料膨胀 Plastic Anchors不锈钢重载胀栓 Heavy Duty Expansion Anchors象脚壁虎 Elephant Foot Anchors长型兰花夹 Short Strap Anchors?九、销 Pins?开口销 Split Pins圆锥销 Taper Pins锁销 Lock Pins销轴 Clevis Pins with head槽销 Grooved Pins弹性销 Spring Pins圆柱销 Parallel Pins弹性圆柱销 Slotted Spring Pins带孔销 Pins with split pin hole?十、挡圈 Circlips/Rings?开口挡圈 E rings孔用挡圈 Circlips for holes轴用钢丝挡圈 Roundwire Snap Rings for shaft轴肩挡圈Rings for shoulder夹紧挡圈 Grip Rings轴用卡簧 Circlips for shafts带齿轴用挡圈 Retaining Rings with Lugs for shafts钢丝锁圈 Round wire Circlips锥形锁紧挡圈 Lock Rings with cone pins?十一、其他 Others?牙条 Threaded Rod冲压件 Stampings平键 Parallel Keys半圆键 Woodruff Keys扳手 Spanners钢丝螺套 Wire Thread Insert自动车床车削件 CNC Turning Parts齿轮 Gears模具 Molds线材盘元 Iron or steel wire rod铰链 Hinge表面处理 Surface Treatment。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
紧固件中英文对照
(紧固件常用产品和常用语)
紧固件中英文对照紧固件标准名称
紧固件标准(常用的是德标和美标)
GB（国标）ISO(国际标准)
DIN（德制）JIS（日标）
ANSI/ASME（AmericanNationalStandardsInstitute–ANSI；
AmericanSocietyOfMechanicalEngineers–ASME）（美标）
BS（英制）IFI=IndustrialFastenerInstitute是美国工业紧固件协会的标准BA（英制）常见螺纹">螺纹中英文对照
M.MF(公制牙)
UNC.（美制粗牙）
UNF(美制细牙)
UNEF(美制超细牙)
B.S.W.标准惠氏粗牙系列，一般用途圆柱螺纹(英制牙)
B.S.F.标准惠氏细牙系列，一般用途圆柱螺纹(英制牙)
finepitchthread细牙
fullthread全螺纹
螺丝头型
IHH=indhexhead锯六角头
PH=phillips十字槽
Pan圆头(盘头)
Oval半沉头
H.W.H..六角小法兰
H.W.F.六角大法兰
CSK沙拉头(沉头)
Largewafer大扁平头
Bugle喇叭头
Truss盘头带垫
Pozi米制槽
Serra-tion垫下带花
FlowerHead开花头
6-bobesrecess内梅花
Cuphead杯头
常见紧固件产品名称
splitwasher弹簧垫片（一般厂家会管washer叫“华司”）
flatwasher平垫片
Selftappingscrew自攻螺丝
Selfdrillingscrew自钻螺丝
drywallscrew干墙螺丝/干壁螺丝/墙用螺丝
highlowscrew高低牙螺丝
collatedscrew链带螺丝
Concretescrew水泥螺丝
Tri-lobularthreadscrew三角螺丝
kepnut锁紧螺母
acornnut盖形螺母
wingwasher翼型垫片
eyebolt吊环螺栓（也叫环首螺栓，其实这个叫法很多，大概是不同地区的缘故）
Pistonbolt活塞螺钉
Windingbolt线圈螺钉
Hexagonheadbolts六角头螺栓
Hexagonflangebolts六角法兰螺栓
Carriagebolt马车螺栓
Squareheadbolt方头螺栓
Flatcountersinksquareneckbolts沉头方颈螺栓
Flatcountersunknibbolts沉头带榫螺栓
Crossrecessedpanheadtappingscrews十字槽盘头自攻螺钉
（如果在图纸上看到标注#2或#20等，是指该螺丝的头部适合2号或者20号的螺丝起子）紧固件表面处理方式
BO=blackoxide氧化发黑（如果仅仅标注black,是指做染黑处理）
Zincplated镀锌
cementation渗碳
nylonpatch耐落（刚看到的时候是直接按照字面翻译的“尼龙片”，拿给经理看的时候经理对照图纸看了半天跟我说你你去查下耐落的英文，果然---）
6其它图纸上可能出现的标注
螺纹大径：MajorDiam
中径：Pitchdiam
底径：Minordiam
通止规：Go/Nogogage
机械性能：mechanicalandphysicalproperties
unifiedthread统一英制螺纹
Lustratehydrogenaftergalvanizingtoavoidhydrogenembrittlement镀后去氢，防止氢脆
Casecarburization表面渗碳
Withacrossflats对边
Withacrosscorners对角
Radiusoffillet:头下圆角
Transitionthreadlength过度螺纹
Wrenchingheight扳拧高度
Rockwell铬氏硬度
Vickers维氏硬度
Brinell布氏硬度
Metallographymicroscope金相显微镜
Saltspraydevice盐雾试验箱
Tensiletestingmachine拉力试验机
Coldforming冷打
Hotforging红镦
PC8=propertyclass8机械性能8级
原材料：Rawmaterial
球化退火：Annealing
冷拔：Drawing
冷镦：Forming
机加工：Machining
螺纹成型：RollThreading
热处理：heat-treatment
表面处理：finish
去氢：Lustratinghydrogen
检验：Inspection
包装：Packing
入库：Stocking
车床：lathe
磨制：grinding
红打：hotforging
冲压：punching
7海关编码
73181500螺栓
73181600螺帽
73182100垫圈
73181100方头螺钉
73182300铆钉
73181400自攻螺钉
73182400销及开尾销
国外常用英制螺纹的代号、名称和标准号
标记代号名称(或用途)国别标准号备注
B.S.W.标准惠氏粗牙系列，一般用途圆柱螺纹英国标准
BS84牙型角为55°的英制螺纹
B.S.F.标准惠氏细牙系列，一般用途圆柱螺纹
Whit.S附加的惠氏可选择系列，一般用途圆柱螺纹
Whit惠氏牙型的非标准螺纹
UN恒定螺距系列的统一螺纹美国标准
ANSIB1.1标准牙型(牙底是平的或随意倒圆的)的内、外螺纹
UNC粗牙系列的统一螺纹
UNF细牙系列的统一螺纹
UNEF超细牙系列的统一螺纹
UNS①特殊系列的统一螺纹
UNR圆弧牙底恒定螺距系列的统一螺纹圆弧牙底的UNR、UNRC、UNRF、UNREF、UNRS只用于外螺纹而没有内螺纹
UNRC圆弧牙底粗牙系列统一螺纹
UNRF圆弧牙底细牙系列统一螺纹
UNREF圆弧牙底超细牙系列统一螺纹
UNRS圆弧牙底特殊系列统一螺纹
NPT②一般用途的锥管螺纹美国标准
ANSIB1.20.1牙型角为60°的英制管螺纹
NPSC管接头用直管螺纹
NPTR导杆连接用锥管螺纹
NPSM机械连接用直管螺纹
NPSL锁紧螺母用直管螺纹
NPSH软管连接用直管螺纹
NPTF干密封标准型锥管螺纹美国标准
ANSIB1.20.3Ⅰ型
PTF-SAESHORT干密封短型锥管螺纹Ⅱ型
NPSF干密封标准型燃油用直管内螺纹Ⅲ型
NPS1干密封标准型一般用直管内螺纹Ⅳ型
ACME③一般用途的梯形螺纹美国标准
ANSIB1.5
牙型角为29°的英制传动螺纹
①尺寸和公差使用与标准系列相同的公式计算的标准系列之外的所有直径与螺距组合。
②我国的60°圆锥管螺纹GB/T12716-1991与之等效。
③ACME螺纹包括一般用途的和定心的两种配合的梯形螺纹，其中一般用途者与我国标准GB/T5796-1986规定的梯形螺纹的性能相类。