ConST811现场全自动压力校验仪
2017年11月建筑安装施工机械仪器仪表台班费用
数字万用表 数字万用表 万用表 数字万用表 数字多用表 精密电压电流表 精密电压电流表 数字交/直流钳形表 继电器保护测试仪 继电器校验仪 电压电流互感升流器 数显高压表 台式光万用表 标准电阻箱 直流电压电流发生器 直流高压发生器 电感电容测试仪 数字频率计 数显频率发生器 相位频率计 通用计数器 通用计数器 频率计数器 通用计数器 通用计数器 通用计数器 通用计数器 通用计数器 通用计数器 通用计数器 通用计数器 光功率计 光纤切割器
98050420 98050450 98050460 98052290 98052300 98052310 98052320 98052330 92370 98052380 98052390 98052400 98052410 98052420 98052430 98052440 98052450 98052460 98052470 98052480 98052490 98052500 98052510 98052520 98052530 98052540 98050550 98052550 98052560 98052570
编码名称98010060水准仪98010105变比自动测量仪98010120自动lcr测量仪98010160晶体管图示仪98010240光导介损测量仪98010310数字式快速对线仪98030050工频稳压电源98030140直流稳压稳流电源98030240交流稳压电源98030350精密交直流稳压电源98050060标准电阻电容箱98050160电桥98050320兆欧表98050500绝缘测试仪98050510耐压测试仪98050520耐压测试仪98050530耐压测试仪98050540绝缘电阻测试仪98050550高压绝缘电阻测试仪98050580接地电阻测试仪98050730变压器电阻测试仪98050750最佳阻容调节器98050770数字转速表98050780模拟负载电阻装置98050790电能校验仪98050820真空断路测试仪98050830数字毫秒计98050850绝缘电阻测试仪98050930数字万用表98050950数字电压表98050960数字电压表98050980数字万用表98051000数字万用表98051070万用表98051140数字万用表98051170数字多用表98051400精密电压电流表98051410精密电压电流表98051830数字交直流钳形表98052010继电器保护测试仪98052040继电器校验仪98052060电压电流互感升流器98052070数显高压表98052080台式光万用表98052170标准电阻箱98070860直流电压电流发生器98070880直流高压发生器98110380电感电容测试仪98130080数字频率计98130140数显频率发生器98130160相位频率计98130190通用计数器98130200通用计数器98130210频率计数器98130220通用计数器98130230通用计数器98130240通用计数器98130250通用计数器98130260通用计数器98130270通用计数器98130280通用计数器98130290通用计数器98150090光功率计98150180光纤切割器98150220光谱分析仪98150230光纤融接机98150240光纤熔接机98150290光时域测试仪98230080示波器98230160示波器98230490存储示波器98230500数字存储示波器98230510数字存储示波器98230520数字存储
CONST181使用说明书(2010.01.22)_
一总述我们的压力专家在三十多年研制和生产活塞压力计的基础上，利用国外新技术、新材料使我公司研制、生产出的压力校验器能更好地满足用户校验压力仪器、仪表时使用。
因此，便携、省力、使用方便、密封性能好和易维护正是我公司压力校验器的特点。
我公司还参与起草了机械部标准：JB/T599《压力表校验器》。
我公司的多项专利技术均处于国际先进水平。
压力校验器是压力校验系统的重要组成设备，密封性是压力校验器的最重要指标。
经过与国外同类产品比较，本公司的压力校验器在密封性、造压的轻便性和微量调节性能等方面处于同类产品的领先地位。
本公司的压力校验器特别考虑了微压受温度影响问题，高压压力校验器针对高压被检压力仪表回检时不能平稳降压的问题，我们做出了很好的解决方案。
压力校验器的研制，参照了有关标准，如机械部标准：JB/T599《压力表校验器》、JB/T 7393-1994《活塞式压力计》及国家标准：GB/T 14211-93《机械密封试验方法》，并且参考了有关国家计量检定规程：JJG 129-90《一等标准活塞式压力计检定规程》、JJG 49-1999《弹簧管式精密压力表及真空表检定规程》、JJG 52-1999《弹簧管式一般压力表、压力真空表及真空表检定规程》。
我公司的液体压力泵的密封性优于国家标准五倍以上。
本公司的气体压力泵的密封性优于国家标准十倍以上。
活塞与压力校验器组成压力测试系统，是动态平衡系统。
在活塞有效行程内，系统压力不变，现象是压力稳定。
数字压力校验仪与压力校验器组成的压力测试系统是密闭非动态平衡系统。
加压过程中，由于压缩原因，分子需吸收能量，分子间隙缓慢减小，所以压力不会立即稳定（表现为压力下降、系统不稳），需等待一段时间压力才会稳定。
降压过程中，由于膨胀原因，分子需释放能量，分子间隙增大，所以压力不会立即稳定（表现压力上升、系统不稳），需等待一段时间压力才会稳定。
上述二种现象，只是物理过程不同，该现象在液体压力校验器与数字压力校验仪组成的系统中表现尤其明显。
主要计量器具清单
西仪
精度 2.5 级，测量范围： 0～100kPa。
西仪 西仪 DRUCK
长春气象仪器厂
精度： 0.1 级，测量范围： 400BAR
0-250bar ，精度 0.4 0-2.5bar ，精度 0.1 测量范围 :800hPa— 1060hPa 准 确 度：≤ ± 2hPa；使用温度：－ 10～+40℃。
密度
测量： DCV ACV FREQ DCR DCI 温度
输出： DCV ACV FREQ DCR DCI 温度
温度校准
0.01 ～ 11111.1 Ω ， 0.02 级， 0.1 瓦。
电阻
氢气纯度测试 11
仪 12 接触式温度计
AT601HODP UT325
常州爱特科技有限 公司
优利德
湿度：测量范围：露点 -80 ～ +20℃或± 60℃； 露点精度：± 0.5 ℃；分辨率：露点 0.1 ℃； 气体流量：调节在 0.2 ～0.9L/min 。纯度：
50A
变压器变比测 37
试仪 变压器有载分 38 接开关测试仪 发电机转子交 39 流阻抗测试仪
开关综合特性 40
测试仪 SF6 纯度测试 41
仪 手持三相钳形 42
功率表
JYT JYK-I HDJZ
GKC-98H6 ASF6 UT233
保定市金源科学仪 器有限公司
保定市金源科学仪 器有限公司
苏州华电电气
精度： 0.075 。
0-150Kpa
0~300℃
圆形数显， 0.01mm，0～ 25.4mm带有磁性表 座。
圆形数显， 0.001mm，0～ 10mm带有磁性表 座。
准确度： 1 x 10-3 g/cm3，测量范围： 0 to 1.999 g/cm3 ，温度范围： 0 to 40 ℃
testo 511 绝压仪 中文操作手册说明书
testo 511绝压仪中文操作手册官网：ｗｗｗ．ｏｐｅｎ１７．ｃｏｍ仪器过了保修期也不用担心，您可以用经济的价格购买我们的维护保养服务。
购买产品后在半年内回寄保修登记卡，或登陆网站 进入“服务与支持”页面进行注册，并提供发票信息至testo ，即免费得6个月延长保修。
为确保客户享受完善的产品售后维修服务，德图仪器国际贸易（上海）有限公司特别设计了防伪标识。
所有的中国境内由德图和德图授权的代理商出售的德图产品，都会贴上该防伪标识。
防伪标识由7 位数字组成。
德图公司每售出一台仪器，都会在数据库中录入防伪标识上的号码。
当客户送修仪器时，我们会核实该号码。
如果仪器不带防伪标识，或者防伪标识被强行撕破，那么客户将不能享受在德图的维修中心维修产品之权利。
该举措一方面充分保障了用户的合法权益，另一方面也完善了德图产品的质量管理体系。
当产品产生了些许故障，您无须辛苦地奔波，拿起话筒拨打热线电话************-800。
我们会有便捷的上门取货服务，让您足不出户解决问题。
如果您的仪器出现故障，德图可出借仪器给您使用，直到产品修好送到您手中。
您不会有中断工作的后顾之忧。
保修延长防伪标识 —— 德图质量保障维护保养协议上门取货服务维修期间样机出借安全说明关于本操作手册¾请在使用本产品之前，仔细通读该操作手册，并熟悉本产品的操作。
请小心保管本文档，以便你在需要时可以查阅。
请把该操作手册提供给其他用户阅读。
¾请特别注意下列标识的提示信息：重要提示！避免人身伤害或仪器损坏的预防措施¾请在操作手册规定的用途范围，以及限定的技术参数内，正确操作仪器。
不要使用强力。
¾不要将仪器与溶剂、硫酸以及其他腐蚀性溶液存放在一起。
¾请务必按照操作手册中的描述来执行维护和修理工作。
请遵循规定的步骤。
为了确保仪器安全，请务必使用德图的原装备件。
磁辐射极强！损坏其他仪器！> 请将易受磁性损坏的仪器远离磁辐射源（如监视器，电脑，起博器，信用卡等）环保回收¾将损坏的充电电池/废电池送到指定的电池回收点。
电动压力校验仪的操作方法压力校验仪操作规程
电动压力校验仪的操作方法压力校验仪操作规程电动压力校验仪是为校验各种压力变送器、压力传感器、压力开关、差压变送器、数字压力表、专用压力校验仪器，产品被广泛用于多个行业中。
电动压力校验仪应当如何操电动压力校验仪是为校验各种压力变送器、压力传感器、压力开关、差压变送器、数字压力表、专用压力校验仪器，产品被广泛用于多个行业中。
电动压力校验仪应当如何操作呢？下面我就来实在介绍一下电动压力校验仪的操作方法，希望可以帮忙到大家。
电动压力校验仪的操作方法1、电源开、关键：按“开”键后，LCD显示为：名称、压气力程及精度，然后自动转换到测量状态。
2、校零键：测量前，按一下此键，仪表自动将传感器的零点值采集并送CPU 进行处理，保证仪表所测数据为实际压力值。
3、压力键：重复按此键可实现压力、电流双显，压力、毫米水柱或压力、公斤之间的转换。
若显示为测量电流及百分比状态时，按一下此键，仪表自动转换到压力测量状态。
4、电流键：重复按此键可实现压力电流双显到电流百分比显示之间的转换。
5、背光键：工作于光线较弱的环境中，按一下此键，打开背光灯,便利读数。
6、电流测量：仪表备有直流输出24VDC和输入22mAo在校验变送器时，请按仪表面板上标明的接线方式进行连接。
红表笔套红表笔夹后，插入仪表面板上红色表笔座内。
黑表笔套上表笔夹，插入绿色（或兰色）表笔座内。
红表笔接变送器“+”，黑表笔接变送器“一”o这样仪表在供应24VDC电源给变送器时，同时回路电流在仪表LCD上显示出压力变送器零点电流值。
7、充电电源：仪表配外置式开关电源，接入市电220VAC,对仪表高能量馍氢电池充电，充电指示灯为红色时，处于充电状态：充电指示灯为绿色时，表明电池已充分，拔下开关电源，切勿在欠电压情况下，长期放置仪器，应适时充电。
8、压力输出1、2：校验变送器或其它在线仪表时，将变送器或其它在线仪表用所配软管连接此接口，可实现检测、测量。
自校压力计时，只需将此接口堵好，可以检测出手压泵系统的气密性。
Omega LC1102 LC1112 电子载力仪产品说明书
“-WtC”
Additional Cable Length Available
Note: 100,000 lb capacity load cells are supplied with 2 eyebolts for easy handling.
D
WIRING CODE GREEN +OUT WHITE -OUT BLACK -INPUT RED +INPUT
Rod End Artwork/Product Art/Pressure/P-Rod End
3 mV/V OuTpuT CANISTER LOAD CELLS
STAINLESS STEEL
Tension/Compression Calibrated in Tension† LC1102 (Cable Style) LC1112 (Connector Style) 0-50 lb to 0-100,000 lb 0-23 kg to 0-45,372 kg
LC1112-50
DP41-B, DP41-S, DP25B-S
LBC-038
rEC-038M
100
45 LC1102-100
LC1112-100
DP41-B, DP41-S, DP25B-S
LBC-038
rEC-038M
300
136 LC1102-300
LC1112-300
DP41-B, DP41-S, DP25B41-S, DP25B-S
LBC-012
rEC-012M
5000
2269 LC1102-5K
LC1112-5K
DP41-B, DP41-S, DP25B-S
LBC-100
ConST811用户手册(中文)
2.2.1 ConST811 基本结构..................................................................................................................................................................................... 12 2.2.2 电气插孔 ..................................................................................................................................................................................................... 13 2.2.3 RS232 接口 ................................................................................................................................................................................................. 13 2.2.4 按键功能 ..................................................................................................................................................................................................... 14 2.2.5 气路接口 ..................................................................................................................................................................................................... 14 2.3 启动前准备......................................................................................................................................................................................................... 15 2.3.1 安装电池 ..................................................................................................................................................................................................... 15 2.3.2 安装背带 ..................................................................................................................................................................................................... 15 2.3.3 气路连接 ..................................................................................................................................................................................................... 15 2.3.4 打开屏幕 ..................................................................................................................................................................................................... 16
火力发电厂(2×300MW)热工试验室设备清单(2013年3月)...
1
设备状态监测校验仪
产生标准转速信号，可以动态校准转速传感 器，静态校准轴向位移、胀差、热胀、偏心等 传感器及显示表。
位移(0 ～ 30mm)
2 四
百分表 其它电量校准仪表和设备
通用测微量长度的量具
最小分度值:0.01mm,量程:0～ 10mm
5/12
序号
名称
用途 测量电流和电压，模拟输出电流。 提供24VDC电源。 同时以毫安和百分比显示。 25%步进输出4~20mA、0—10V。 现场绝缘测试 三位半LCD显示，V、A、mA、mV、Ω
作为对二次仪表的校验
± （0.01%RD+ 0.005%FS）
国产
2
套
二
校准压力（真空、压力、差压）、流量仪表用校准仪表和设备 校验压力变送器、压力表、压力开关, 含过滤装 置，软管。 总重不超过 1.5kg
1
ConST132 手持液体压力泵
(-0.085~60)MPa
国产
1
套
2/12
序号
名称
用途
6位半显示,完成对工业用热电 偶S、B、R、K、N、J、E、T， 工业用铂电阻Pt100、Pt10、 校验软件可实现热电偶、热电阻的全自动检 Cu100、Cu50，玻璃液体温度计 定，最终打印出检定记录及证书，一次可检定 、双金属温度计、压力式温度 10支热电偶/热电阻。校验软件为中文界面，必 计，膨胀式温度计，工作用贵 须符合相关中国国家检定规程 金属热电偶，工作用廉金属热 电偶，工业铂、铜热电阻，工 作用玻璃液体温度计的数据采 集及数据处理。 419.527℃-1084.62℃；δ=1.0 ℃ 与热电阻标准设备配套使用。 （0℃~ 400℃） 玻璃保护管、防冻液、硅油、 刚玉管、抽油烟机、冷端恒温 箱及夹具
~计量检定单价
changer tester
大型地网接地电阻测 试仪
绝缘油介电强度测试 仪
变压器有载分接开关 测试仪
保定金源 保定金源 保定金源 上海徐吉 武汉国电 保定金源 保定金源 华天电力 湖北中试
共立 西安双英
FUZRR 木森电气
个
1
58
thermodetector
测温仪
JDC-2（附带配套热电偶）
台
1
59
Slump tube
坍落度桶
60
Concrete Blocks Cube Test Moulds
混凝土试块模具
61 Oxygen content meter 氧气含量检测仪
62
Endoscope for weld bead inspection
0-1.6Mpa 0-2.4Mpa 0-4Mpa 0-10Mpa 0-16Mpa 0-40Mpa 2505EGM2 HS610E
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
台
1
75
torque wrench
扭矩扳手
MDS系列(扭矩力全套)
套
1
140 140 500
/ / 700 105 150 150 150 70 70 70 70 70 70 2100 2100 / 240
焊道检查内窥镜
真空压力表（带表
FLUKE718压力校准仪说明书
718 30G/100G
Pressure Calibratorp
用户手册
Simplified Chinese July 1998 Rev.3, 12/02
© 1998, 2000, 2001, 2002 Fluke Corporation, All rights reserved. Printed in U.S.A. All product names are trademarks of their respective companies.
目录
条目
简介.......................................................................................................................... 安全信息................................................................................................................... 熟悉校准仪 ............................................................................................................... 使用绝对压力模块的归零步骤.................................................................................... 校准压力/电流（P/I）变送器 ..................................................................................... 使用内部泵 ............................................................................................................ 使用外接泵 ............................................................................................................ 外接式 Fluke 压力模块兼容性.................................................................................... 供应回路电源 ............................................................................................................ 维护.......................................................................................................................... 若有困难 ............................................................................................................... 清理...................................................................................................................... 校准...................................................................................................................... 更换电池 ............................................................................................................... 更换保险丝 ...........................................................................................................
康斯特让检测更轻松
康斯特：让检测更轻松-----------------------------------------------------------------€«||沒1"康斯特北京表斯持仪表科技股份有限公司（以下简称"I斯特”）成立 于2004年，主要从事教孛屆力，溫度铪測枝准仪器■设备的研犮、生户、销售和服务。
康斯特是创j f e•板上市公司，总部位于：ib京，在美国栩有全资子公司、欧刑有办事处。
专冊技笊，IVI研友驱动创新康斯特是研发驱动型的创新企业。
以极致创 新为根本、极致品质为目标、极致交付为通道、极致服务为导向，康斯特先后荣获国家智能制造 试点示范企业、中国智能制造百强企业、工信部 制造业单项冠军示范企业称号。
近几年，康斯特持续加大研发投入，以确保 公司技术的领先性。
2019年，公司研发投入占比 营业收入近19%; 2020年公司持续加大研发投入，前三季度研发投入占比营业收入24. 9%。
自成立伊始，康斯特积极参与国家标准和行 业标准的起草，开展先进标准创制，形成在技术 方面的核心竞争力。
始终聚焦仪器仪表产业链，康斯特以核心技术改善产业生态，实现公司价值 并推动行业有序发展。
压门计走在创新前沿压力计量仪器一直是康斯特的主要研究方 向，从最初的数字压力计、压力校验仪、压力控 制器一直到现在的智能全自动压力校验仪，康斯 特一直走在创新的前沿。
2019年，康斯特推出了 ConST811A智能全 自动压力校验仪，控压最大值可达7MPa，准确度 等级最高为0.01级。
其高功率压力驱控技术国 际领先，可以大幅提高现场及实验室的检测效率；智能模块化设计、以及更宽的控压范围、更高的 控制准确度、更快捷交互界面等更是具有鲜明的产品属性。
2020年，康斯特推出ConST125系列智能多 通道压力检定装置，将压力连接装置、24V直流 电源和6路扫描阵列高度融合。
ConST125配合 康斯特智能压力控制器和ACal压力检定校准软 件，可高效地完成6台压力仪表的全自动检定，大幅提高压力校验人员的工作效率。
KNC Model 3112 移动生活压力校准与测试系统产品描述说明书
1981KNC Model 3112 Portable Live Pressure Calibration and Test SystemProduct DescriptionThe Model 3112 Portable Live Pressure Calibration and Test System is a compact, completely self-contained unit designed for calibrating and testing pressure gauges, transducers, pressure switches, and other pressure-sensitive instruments up to 2,000 psi with an accuracy of ±0.5% of full scale. Two large, legible gauges, reading from 0 to 100 psig and 0 to 2,000 psig respectively, and controlled by an automatic transfer valve, permit precise stepless measurements over the entire range of the system. Other pressure ranges and units of measure (e.g., kPa) are available upon request. For details, please see the Ordering Information section below.An internal nitrogen cylinder with a capacity of 90 cubic inches (7.1 std. cubic feet when charged at 2,250 psi at 70°F), permits the Model 3112 Portable Live Pressure Calibration and Test System to be easily transported to remote locations—no external gas or power sources are required. The cylinder can be charged using any available high pressure nitrogen source, and is wire-wound for protection against impact. Additional safety features include “blow-out back” master gauges to protect the operator from glass breakage in the event of a malfunction, burst discs to guard against inadvertent overpressurization, and a relief valve designed to protect the test item and master gauges from damage.During setup, the Model 3112 Portable Live Pressure Calibration and Test System is first connected to the item to be calibrated using a 5-foot-long braided test hose. The hose is terminated at both ends with 1/4" female swivel AN fittings and doubles as a charging hose for the nitrogen cylinder.To test an item, gas from the nitrogen cylinder is metered into the test circuit via a precision soft seat control valve (see diagram below), and applies pressure simultaneously to the item undergoing calibration and the master reference gauges. This enables the operator to easily perform comparative readings.As the pressure is increased during testing, readings are transferred automatically from the low range (0 to 100 psig) gauge to the high range (0 to 2,000 psig) gauge. A second control valve is used for venting, allowing precise downscale measurements to be performed. As the test pressure drops, the transfer valve automatically switches from the high range gauge to the low range gauge.A 65 to 250 VAC electrical tester is built into the Model 3112 Portable Live Pressure Calibration and Test System for convenient pneumatic switch testing. The electrical tester is connected from the front panel of the test system to the switch being tested using two 5-foot leads terminated with alligator clips. The presence of electrical current is shown using a neon lamp. The lamp will illuminate to indicate that voltage is present; when applied pressure trips the switch, the lamp will turn off.All components of the Model 3112 Portable Live Pressure Calibration and Test System, including the test hose, technical manuals, and other supplies, are housed in a weatherproof, compact, and rugged aluminum carrying case with a locking hinged lid. A pressure relief valve built into the storage case protects the system from internal gas leakage during storage.Ordering InformationStandard versions of the Model 3112 Portable Live Pressure Calibration and Test System are equipped with a 0 to 100 psig low range master gauge and a 0 to 2,000 psig high range master gauge. NSN (National Stock Number) 6685-821-0798 is applicable to this standard version.The Model 3112 Portable Live Pressure Calibration and Test System may also be ordered with customer-specified measurement ranges for the master gauges. The minimum range available for the low range master gauge is 0 to 15 psig. The maximum range for the high range master gauge is 0 to 3,000 psig. Other modifications, such as metric scale units, are available upon special request. Please contact King NutronicsCorporation for more information.SpecificationsCharacteristics Specifications Carrying case:Metal gaugeWeatherproofingMaterialInstrument protection 0.050 inchRubber seal gasket Anodized aluminum Lock and keyPanel:MaterialMetal gaugeItem identification Anodized aluminum (6061-T6) 0.125 inchSilk-screening on faceMaster gauges:Accuracy Readability 0.5% of full scale4.5 inch mirror dial with adjustable pointerSupply gauge:Readability Range 2 inch0 to 3,000 psigMetering valves Panel-mounted brass, fine-metering type, with replaceable Teflon seat Fill and test ports:Material Threads Protection 300-series stainless steel AND10056-4 (1/4” flare) Captive dust capsInternal supply cylinder:Capacity RatingProof test 7.1 standard cubic feetICC 3AA to 2,250 psig. Retest due date noted on panel face. 4,500 psigPlumbing:Material Couplings 300-series seamless stainless steel tubing AND flareFiltration 10µm nominalCheck valve Soft seatBurst disc pressure (brass) 3,000 psig nominalGauge protector Adjustable, non-bleedRelief valve Adjustable, atmospheric bleedCase relief valve Automatic two-way vent ±0.5 psig, manual override Test hose:LengthConstruction Fittings 5 feetSynthetic rubber with scuff-resistant fiber braid Cadmium-plated steel with female AN flare swivel fittingsElectrical tester:Voltage rangeTest lead length (qty. 2) TerminationsLamp type 65 to 250 VAC5 feetMale plugs and alligator clipsDIALCO Data Light (replaceable), neonDimensions, excluding handle(W x H x D) 16 x 8 x 9 Weight 22 lbs.。
马特尔电子公司推出的BetaGauge 330压力校准仪说明书
Calibration Technology Starts HereMartel Electronics Corporation introduces a revolution in pressurecalibration technology for the process industries.With the release of its new BetaGauge 330,technicians will have a small,lightweight hand held calibrator that generates pressures up to 150PSIG using a high performance integral electric pump.Before the BetaGauge 330,users had to manually generate pressures with tedious and hard to use manual pumps or use large,heavy and unwieldy boxes with limited portability and limited battery life.The BetaGauge 330has a form factor only slightly larger than Martel’s popular BetaGauge 321and weighs in at a mere 2.5pounds.The housing is contoured to easily fit a technician’s hand with good balance top to bottom.Performance doesn’t stop with the pump.The BetaGauge 330provides ±0.025%of full scale accuracy on its internal,isolated pressure sensor.Temperature compensation on its internal sensor ensures accuracy in field applications.An external pressure module connection supports all 29ranges of BetaPort-P pressure modules foreven greater measurement capabilityContinued on back.General Features.Integrated internal electrically operated pneumatic pump:generates pressure to 150PSI and vacuum to -12PSI (-1to 10Bar,-10to 100kPa).Accuracy to 0.025%FS .Source/measure 4-20mA.Small,rugged compact design operates on eight (8)standard Alkaline AA batteries-Only 8”high x 4”wide x 2-3/8”deep (20cm x 10cm x 6cm)-Lightweight at just 2.5pounds (1.2kg).External pressure module interface supports all29BetaPort-P compatible pressure modules (requires optional BPPA-100module adapter).Pt100RTD input for temperature measurement,accurate to 0.1°C (0.2°F)(measurement only).24V loop power to power device under test .Store and recall up to 5user defined setups.Large graphic style LCD with backlight can be configured to display up to 3variables displayed simultaneously (user controlled).Ideal for gas flow calibration (custody transfer)applications .Pressure displayed in the user’s choice of 19engineering units .Switch test is automatic using internal sensor or external pressure module .IP56Rated.Percent error functionFor more information:-Call us toll free at 800-821-0023or 603-434-1433-Fax us at 603-434-1653-Email us at ********************and ask for a BetaGauge 330Pressure brochure -Or go to our website, and click on BetaGauge 330Hand Held Pressure Calibrator with Integral Electric Pressure Pump BetaGauge 330The new standard of pressure calibrationPatent PendingSpecificationsRangesAvailable Pressure PSIG:-12to 30PSI /-0.8to 2bar (electric pump)-12to 150PSI /-0.8to 10bar (electric pump)-12to 300PSI /-0.8to 20bar (manual pump)mA 0to 24mA,max,load 1000Ohms RTDPt100,-50to 150˚CEngineering Unitspsi,bar,mbar,kPa,kgcm2,cmH2O@4°C,cmH2O@20°C,mH2O@4°C,mH2O@20°C,inH2O@4°C,inH2O@20°C,inH2O@60°F,mmHg@0°C,inHg@0°C,ftH2O@4°C,ftH2O@20°C,ftH2O@60°FInstrument Power Supply 24VDC at 24mA Accuracy Pressure±0.025%of full scale on internal sensor module dependent for external sensorsAdd 0.005%FS/˚C outside of 15to 35˚C mA ±0.015%of reading ±2counts(simulation and measurement)Volts ±0.015%of reading ±2counts(measurement only)Temperature ±0.1°C (0.2°F)(measurement only)(Pt100RTD)GeneralIntegrated internal electrically operated pneumatic pump:generates -12PSI to 150PSI pressure (-0.8to 10Bar,-8to 100kPa)Manual pump version -12to 300PSI /-0.8to 20Bar EnvironmentalOperating Temperature -10°C to +50°C Storage Temperature -20°C to +60°C Power RequirementsBatteryEight (8)standard Alkaline AA batteries Battery Life 300pump cycles to 150PSI minimum1000pump cycles to 30PSIPhysicalDimensions 8”high x 4”wide x 2-3/8”deep(20cm x 10cm x 6cm)Weight 2.5pounds (1.2kg)Connections Pressure:1/8”female NPT Electrical:standard banana jacks RTD:4pin LEMO style External module:6pin LEMO styleIncluded Accessories -NIST traceable calibration certificate,batteries installed,test leads,test hose fittings,user guide,carrying case.Martel Electronics Corporation Distributed by:3Corporate Park Drive,Unit 1Derry,NH 03038Phone:+1(603)434-1433Fax:+1(603)434-1653Copyright 2008Martel Electronics;All trademarks are the property oftheir respective owners.0807R1CD-330BetaGauge 330BETAGAUGE 330Hand Held Pressure Calibrator withIntegral Electric Pressure PumpA Pt100RTD input is provided for temperature measurements accurate to ±0.1°C (0.2°F).In addition,the BetaGauge 330measures and simulates 4-20mA loop current signals.It can measure up to 30VDC.An internal 24VDC Instrument Power Supply supplies power to a transmitter under test.Like its calibrator siblings,the 330displays up to 3calibration values at one time from the choice of internal pressure sensor,external pressure sensor,temperature from the optional RTD probe orelectrical (mA or VDC).The display is a large back lit graphicsstyle LCD that’s easy to read in any lighting condition.The new BetaGauge 330Pressure Calibrator provides a number of convenience features.Switch test can be performed on internal or external pressure input.Percent (%)Error and damping functions are provided.Up to five frequently used setups can be stored and retrieved with one button recall.The compact,rugged design operates on eight (8)standard AA Alkaline batteries.Due to the power saving designs incorporated in the BetaGauge 330,it can perform approximately 300calibration cycles to 150PSI on one set of batteries.The 330comes in 3ranges of 30PSI,150PSI and 300PSI.The 300PSI version uses a manually operated handpump.Like all Martel calibrators,the BetaGauge 330comes from the factory ready to go to work with batteries installed,NIST traceable calibration certificate,test leads,carrying case and user manual.。
【精编范文】海格仪表说明书-推荐word版 (8页)
本文部分内容来自网络整理，本司不为其真实性负责，如有异议或侵权请及时联系，本司将立即删除！== 本文为word格式，下载后可方便编辑和修改！ ==海格仪表说明书篇一：DKJ执行机构说明书DKJ(ZKJ)角行程电动执行机构使用说明书一．概述DKJ（ZKJ）型角型程电动执行机构采用“S”型电动执行机构开发的新技术：用精密专用传感器和专用电路组成WF-S位置发送器。
因此电动执行机构不仅在可靠、精度、负载能力、信号品质等性能方面比原来产品有了很大提高，而且对使用环境条件的拓宽，更具有十分重要的意义。
DKJ（ZKJ）角行程电动执行机构不仅可以和Ⅲ型控制单元仪表配套使用，而且还可以和新开发的S型控制单元仪表进行配套，使整个控制系统更加稳定、可靠、性能更好，功能更多。
因此用户可根据系统对DKJ型电动执行机构的要求，自动选择控制单元仪表，组合成一个控制单元系统。
DKJ角行程电动执行机构具有以下特点：1．电动执行机构位置发送器采用具有1/250分辨能力的高可靠性传感器。
输出电流Ⅱ型0～10mA DC,Ⅲ型4～20mADC。
2．电动执行机构位置发送器输出信号的负载能力强,负载能力≤750Ω 3．用户可以自由选择带行程限位机构，且组装调试方便，定位准确，重复性好。
4．交流伺服电动机具有阀用电动机特性，起动力矩大，能承受频繁的启动及短时间的堵转。
且附有制动器。
5．减速器采用少量行星齿轮传动，具有速比大、体积小，重量轻、效率高等优点。
6．位置发送器采用集成电路技术、功耗少，温升低，具有恒流输出特性，输出信号可以是4～20mA(DC)或0～10 mA(DC)，14线对外接线插座达到GB4208规定的IP65标准7．具有0～90C范围内行程控制开关和接点输出通、断信号。
8．调整反零位（20－4）mADC、（10－0）mADC，只需将模块（1）、（3）两点接线对调。
二．用途DKJ型角行程电动执行器可以与变送器、DDZ－Ⅱ型、Ⅲ型调节仪等仪表配套使用，自动地操纵风门挡板、蝶阀、球阀等调节机构，完成自动调节任务，或配用电动操作器实现远方手动控制。
美国迈克罗斯公司 MPS11 分析熔点仪说明书
Analog Melting Point ApparatusQ-1Ordering Example: MPS11-120, melting point apparatus, closed at one end, 120 Vac.MPS11 SeriesU E asy to Operate—Ideal for Educational UseU S upplied with Safe Spirit Filled Thermometer U E conomical PriceThe MPS11 has been designed with both safety and ease of operation in mind, making it ideal for use in education. Supplied with a safe, spirit filled mercury free thermometer, the low toxic blue spirit will not pose a health hazard in the event of a breakage. Easy to follow instructions are printed directly on to the apparatus and are available in most European languages.With a manually adjustable heating rate, the MPS11 will rapidly heat samples up to 20°C (68°F) per minute to the melt temperature and up to the maximum temperature of 250°C (482°F). Accurate readings to within 1°C (34°F) of the melt temperature can be achieved by using a slower heating rate of between 1 and 10°C (50°F) per minute.Up to 3 samples can be viewed and tested at any one time. Samples are illuminated by a bright white LED and viewed via a magnifying lens. The magnifying lens can be detached for cleaning using the simple to follow instructions printed on to the instrument.Melting Point Tubes Made from soda glass, these tubes are easy to seal in a Bunsen flame and cleanly break in two. Supplied in a robust tube holder, pack of 100 tubes. Tube overall length is 100 mm Tube diameter = 1.9 mm (0.07"), inner diameter = 1.3 mm (0.05") and wall thickness = 0.3 mm (0.01")Specifications Number of Samples: Up to 3Temperature Range: 50 to 250°C (122 to 482°F)Heating Rate: 1 to 10°C (34 to 50°F) per minuteDimensions: 370 W x 140 D x 110 mm H (15 x 5.5 x 4.3")Weight: 1.7 kg (3.7 lb)Electrical Supply: 120/240V, 50/60 Hz, 50 W IP Rating: 40MPS11-120, shown smallerthan actual size.。
Setra精密压力测量产品手册
Setra 公司总部设在美国马萨诸塞州的 Boxborough，在那里有 140 名员工从事开发设计、生产管理 ；在中国的 工厂位于天津西青微电子园区，有 18600m2 厂房和 250 名员工。
Setra 公司通过了 ISO9001 ：2000 认证，我们将坚持持续质量改进、按时交货、完善的客户服务为客户提供优质 的产品，满意的服务。
水压差传感器 Model 230（湿 / 湿型）................................................................................................................................................................................................ 38 Model 231（多组态水差压）....................................................................................................................................................................................... 40
DPI 611 手持式压力校验仪说明书
GEDPI 611Druck DPI 610/615很多领域甚至成为了德鲁克（Ｄｒｕｃｋ）的一个名片。
DPI 611 手持式压力校验仪DPI 611 是DPI 600 家族里的第四代产品，Ｄｒｕｃｋ从1984年开始推出ＤＰＩ６００系列产品后，ＤＰＩ６００系列产品一直是一体式压力校验仪的领导者，通过革命性的将造压功能，信号测量功能集成到一个单一仪器中，DPI 600 一直是工业压力校准的一个标准，在基于３０多年的压力测量和校准经验的积累以及技术能力的储备，ＤＰＩ ６１１将为压力校准提供更优的便捷性和可靠性，技术指标提升一倍，而产品尺寸将会缩小一半左右。
• 比DPI 610的尺寸小50%, 重量轻 33%• 打压到 2 MPa 的时间将小于 30秒 • 能产生低于 95% 的真空• 压力测量的准确度提升两倍左右• 电信号测量的精度提升三倍左右• 简洁的触摸操作屏，功能选项面板，快速任务选项栏以及自定义的任务收藏夹• 任何应用任务都可以通过三次点击选中• 实时误差（合格／超差）显示，结果文档处理功能先进的工艺流程和精密加工先进的工艺流程和精密的加工保障了仪器的特优性能DPI 611压力系统创新的高效造压能力以及精密的压力调节都是通过严格的选料以及特优的公差配合来实现的。
外壳材料的精挑细选以及精密的开模保证DPI 611非常坚固并满足全天候的使用要求。
采用最新的模拟和数字微电子技术来实现高精度的电气测量以及独特的简易使用接口。
先进的工艺以及精密加工决定产品的品质和性能测量的准确度包括了一年的稳定性、DPI 611 mA造压DPI 611 可以产生从95% 真空至2 MPa 的气体压力。
通过一个简单的切换阀就可以实现真空到压力的切换，通过仪器自带的气泵的几下打压就可以达到要产生的压力。
微调功能通过内置的精密容积调节阀来实现。
反行程的点通过精密的泄压阀来实现。
∙ 重新设计的机械结构使得仪器的整体性能得到了很大提升，现在单手握住仪器就可以产生２ MPa 的压力。
安全气压放松器 HON 832 产品信息说明书
product information serving the gas industry worldwide2Safety relief valve HON 832Application, characteristics, technical dataapplication• As leak gas SRV with internal vent connection (function class B in accordance with DIN 33821)• V ariant as proportional SRV with autonomous vent connection (function class A in accordancewith DIN 33821)• For systems in municipal applications and industrial operations• L eak gas SRV type “B”, e. g. for blowing off gas leakages downstream of gas pressure regulators to prevent the SSV from tripping by accident in the event of gas pressure regulator leaks due to consumer zero droop • C an be used for gases in accordance with DVGW Worksheet G 260 and neutral, non-aggressive gases; other gases on requestcharacteristics• Simple, compact design• Position-independent installation• Safe operation• High actuating accuracy• Integrated vent line for use as leak gas SRV (type “B“)Device-specific operating instructions, maintenance instructions, spare parts drawings, and spare parts lists are provided in the brochure “Operating and Maintenance Manual / Spare Parts List 832.20”.3Safety relief valve HON 832Application, properties, technical data*) = vertical cross sectionSafety relief valve HON 832Dimensions4E 12E 205Safety relief valve HON 832A safety relief valve (SRV) has the task of autonomously releasing a gas flow from a pressurised line, as soon as the pressure in the system to be safeguarded reaches the set response pressure through increasing increments. The SRV closes again when the pressure in the system to be safeguarded drops below the closing pressure.The Safety relief valve HON 832 is a directly acting device (works without auxiliary energy) with spring loading.The safety device is designed in two variants: as leak gas SRV and as proportional SRV.When the device is used as a leak gas SRV (type “B” in accordance with 33821) the spring space is vented in-ternally via the vent line. When the device is used as a proportional SRV (type “A” in accordance with DIN 33821) on the spring housing a connection piece is arranged for the autonomous vent line to the free atmosphere.The pressure to be monitored on the inlet side (actual value) is switched internally and compared with thes pecified force of the adjustable setpoint spring. If the pressure in the system to be safeguarded exceeds the set response pressure, the main valve opens and allows the excess gas to flow off via the outlet line. The safety relief valve closes again automatically when the pressure of the system to be safeguarded drops below the response pressure of the SRV.The lateral forces that occur due to the setpoint spring are dissipated directly to the housing via the guide bush. This ensures a high reproducible response accuracy.The valve piston of the main valve is force-relieved through a control spring. Through this measure the valve trim is protected against impermissible stress. The measuring diaphragm is formed as a bead-moulded diaphragm. This means that the high actuating accuracy of the device is also ensured at lower operating temperatures.Structure and mode of operation6Safety relief valve HON 832Structure and mode of operationInlet lineInternal venting Measuring diaphragmSetpoint spring Setpoint adjuster Cover capOutlet line Valve seat Valve disc with sealing ringSpindle bushAutonomous vent connection for proportional SRV (Type “A” in accordancewith DIN 33821)Note: internal venting sealedleak gas quantity SrV (type “B” it accordance with din 33821)7hon 832 - B - e12 / e20 - 1Safety relief valve HON 832device description (example)Device designationHON 832.002017-01© 2017 Honeywell International Inc.For More Information To learn more about Honeywell’s Advanced Gas Solutions, visit or contact your Honeywell account manager GERMANYHoneywell Process Solutions Honeywell Gas Technologies GmbH Osterholzstrasse 4534123 Kassel, Deutschland Tel: +49 (0)561 5007-0Fax: +49 (0)561 5007-107。