导热硅脂TLZ-304测试报告

Customer name: Chengdu Taly Technology.,Ltd

Test report number: 1140025471

测试报告 / Test Report

编号 / Number:1140025471

日期 / Date: 13.04.2016

版本 / Revision: 01

委托方 / Customer name 成都拓利科技股份有限公司/Chengdu Taly

Technology.,Ltd

联系人 / Contact person 刘才彬先生

Mr. Liu

地址 / Street 四川省成都经济技术开发区（龙泉驿区）南二路578号

NO.578,THE SECOND SOUTH ROAD, ECONOMIC

AND TECHNOLOGICAL DEVELOPMENT ZONE

LONGQUANYI DISTRICT CHENGDU SICHUAN,

CHINA

邮编，地区 / Post code, Location 610100，成都 / Chengdu

国家 / Land : 中国 / China

电话 / Tel.: --

传真 / Fax: --

电邮 / E-Mail: --

编写 / Author Jason Liu

电话 / Tel. +86 23 6371 8128-2825

电邮 / E-Mail: jasonlj.liu@

项目经理 / Project manager Jason Liu

电话 / Tel. +86 23 6371 8128-2825

电邮 / E-Mail: jasonlj.liu@

名称和/或描述测试的部分 / Designation and/or description of the test parts:

- 请参见第3章 / see also chapter 3:

TLZ-304导热硅脂/ TLZ-304 Silicone Thermal Grease

测试任务 / Task:

根据客户要求，测试导热硅脂外观，导热系数，锥入度，游离度，挥发份，金属腐蚀试验，体积电阻率，电气强度

Perform appearance, thermal conductivity,Cone pentration, Freeness,Vdaf,Metal corrosion,Volume

resistivity,Electric strength tests for Silicone thermal grease according to customer requirement.

Customer name: Chengdu Taly Technology.,Ltd

Test report number: 1140025471

目录 / Index

1) 基本信息 / General information

2) 测试结果 / Results

3) 测试样件 / Test Sample

4) 测试 / Tests

测试结果专指本报告中所测试的样品。The test results refer exclusively to the object(s)

mentioned in this report.

实验报告只在形式和内容不变和全面的情况下由客户复制和出版。The Test Report shall be reproduced and published in full by the client only.

任何出版物需要经过TÜV莱茵集团的书面批准。Any publication shall be approved prior to the publication in written form by TÜV Rheinland Group.

仅原版签名实验报告为有效。Valid is only the original signed test report.

观点和诠释不是我们的认证部份。Opinions and interpretations are not part of our

accreditation.

感谢您的订单。 / Thank you for your order.

上海 / Shanghai, 13.04.16

Claus Schlereth Jason Liu

实验室经理 / Laboratory Manager 项目经理 / Project Manager

Customer name: Chengdu Taly Technology.,Ltd

Test report number: 1140025471

附件 / Annex

1. 基本信息 / General information

1.1. 项目概览 / Projectoverview

我司报价 / Our offer TCQ201603110

01

2016-03-11

样件接收 / Receipt of test parts 2016-03-28

贵司订单 / Your order -- 实验开始 / Start of tests 2016-03-29 订单号 / PO No -- 实验结束 / End of tests 2016-04-11

1.2. 评价 / Evaluations

实验结束后应依据工程规格确认书要求评估的原则进行外观、形状、性能检测。不可由测试报告中使用的图像实施分析，因为各种外部因素可能会导致摄影文件的失真。Evaluations were done in principle on the test parts. An analysis using the images of the test report is not possible, as by various external influences a distortion of the photographic documentation could be.

(e.g. exposure, illumination, print settings, ...)

1.3. 标准化处理 / Standard conditioning

在实验样件进行材料功能评价/测试前，需要按照ISO554描述的基准标准大气条件23/50(-2)%RH 贮存24 小时。

在与客户未有仲裁测量和实验标准大气条件约定时，以上条件将会在样件恢复、参数测量过程中采用。Prior to testing the test material and / or samples were stored for a minimum of 24 h in standard climate 23/50-2 according to ISO 554. This conditioning is conducted if not otherwise specified in the specification or demanded by the customer.

1.4. 测试后样件处理 / The whereabouts of the test parts

实验结束后送回委托方。The examined samples will be sent back to the client.