电子围栏pte1013-1023说明书
电子围栏方案与说明书
脉冲电子围栏安装及使用说明书目录安全注意事项 (2)一、脉冲电子围栏主机概述 (2)二、脉冲电子围栏主机特点及性能指标 (2)2.1 产品功能特点 (2)2.2 工作环境指标 (3)2.3 输出脉冲指标 (3)三、脉冲电子围栏主机及周界安装说明 (3)3.1 高压脉冲围栏主机图示及接线说明 (3)3.2 LED指示灯状态说明 (4)3.3 周界安装前期准备工作 (4)3.4 周界安装说明及安装过程描述 (5)四、脉冲电子围栏主机使用说明 (10)4.1 脉冲电子围栏主机测试 (10)4.2 使用脉冲围栏主机的RS485通信功能 (10)五、PC 控制界面安装及使用说明 (10)5.1安装 (10)5.2系统设置 (11)5.3选择 (12)5.4 用户管理 (12)5.5报表打印 (12)5.6帮助 (12)5.7 主界面 (12)六、键盘使用说明 (13)6.1 键盘内部接线图 (13)6.2 键盘开机与关机 (13)6.3 按键说明 (13)6.4 通过界面设置围栏及本键盘参数的操作 (14)6.5 关闭窗口轮询 (15)6.6 键盘告警说明 (15)6.7报警记录 (15)七、施工安装规范及安全注意事项 (15)7.1施工安装规范 (15)7.2施工中应注意的其他问题 (15)尊敬的客户:您好！感谢您使用本产品，为了更好更快的安装及使用本产品，请在使用前认真仔细地阅读本手册。
脉冲电子围栏系统包括脉冲电子围栏主机以及对其控制的PC 主机、键盘主机, 本手册针对脉冲电子围栏主机适用，如是您有任何技术问题或需要技术支持，请联系我公司，我公司将竭力为您服务。
安全注意事项◆除非电子围栏已解除高/低压输出，否则切勿触摸系统导体部分。
◆切勿在雷电期间安装电子围栏。
切勿将控制器直接安装于潮湿场所。
◆在安装使用本产品之前，对工作人员应预先作好安全教育技术培训。
◆安装本产品过程中，为了产品以后的正常使用，产品的接地一定要严格按照说明书要求。
张力电子围栏键使用说明书
张力电子围栏键使用说明书尊敬的用户，您好！欢迎使用秦关科技张力电子围栏系统控制键盘。
十分感谢您的支持！为了更方便的使用本产品，请您在使用前仔细阅读说明书，并按照说明书步骤操作，请注意说明书中提到的安全注意事项。
并请妥善保管本说明书，谢谢！安全注意事项使用本产品时需要注意的安全事项：1、在安装和使用本产品之前，应先对操作人员进行培训。
2、请勿把控制键盘直接安装于潮湿的场所。
3、如出现异常情况，应先切断电源，并通知专业人员。
切勿自行拆修，否则后果自负。
4、用户不得自行打开主机维修，否则我司不予保修。
5、本产品的使用者，必须具有电器安全及触电解救知识。
6、安装使用前必须阅读此说明书，熟悉本产品的正确使用方法并规范操作。
目录一、张力系统控制键盘接口与特性 (1)1.1、产品设计依据 (1)1.2 、产品功能及特性 (1)1.3、产品技术参数 (1)1.4、控制键盘接线端子 (1)二、张力系统控制键盘操作说明 (1)三、张力系统控制键盘菜单设置 (2)3.1、菜单操作按键说明 (2)3.2、进入和退出主菜单 (2)3.3、菜单功能介绍 (2)一、张力系统控制键盘接口与特性1.1、产品设计依据根据中华人民共和国公共安全行业标准GA/T1032-2013《张力式电子围栏通用技术要求》文件，设计开发控制键盘。
1.2、产品功能及特性1、通过RS485总线与围栏主机实时通信，可管理和控制1-255个张力电子围栏防区；2、可以对防区布防、撤防、消警快捷键操作，也可增加密码权限来管理布防、撤防、消警；3、多点控制能力，同一系统中最多用5个控制器键盘；4、可设置定时自动布、撤防控制；5、键盘监控状态可以显示各防区实时张力值；6、键盘监测到防区运行异常，立即启动蜂鸣器报警或者外接报警器报警反应，并通过液晶显示屏提示报警防区、报警类型等；7、报警类型有：触网、松弛、断线、主机防拆、主机离线、模块防拆、离线等；8、报警防区号、报警类型、报警时间等历史信息存储和查询功能；9、DC12V、常开、常闭信号报警联动信号输出；10、最多可以支持存放8条报警记录。
广拓张力电子围栏使用说明书
产品标准：GA/T 1032—2013第1页 共12页第3页 共12页第5页 共12页第6页 共12页第4页 共12页第2页 共12页一、张力式电子围栏概述本系列张力探测电子围栏是广拓最新推出的一款安防产品。
他不仅具有阻挡、威慑和报警等功能，更是在集成控制方面有了质的飞跃：可通过键盘远程控制张力控制器的开和关、调整张力报警阈值，并可通过键盘连接红外、门禁等报警设备，实现电子地图、视频监控、打印机等多系统的实时联动，组成一个完整的报警系统。
张力控制器是一种崭新的智能型周界阻挡安防报警产品。
1.1系统功能:● 张力线拉紧报警：当张力线受拉力变化量超过拉紧报警阈值，且持续时间达到或超过设定值时发出报警信号；● 张力线剪断报警：当张力线上的静态张力过小时发出剪断报警，● 张力线松弛报警：当张力线受拉力变化量超过松弛报警阈值时，系统发出松驰报警信号；● 断电报警：系统交流断电时输出断电报警信号；● 防拆报警：当主机或控制杆外壳被打开时，系统会发出防拆报警信号；● 自检功能：主机上电有自检和自诊断能力；● 状态指示：系统界面能准确显示主机的运行状态、报警状态（入侵、松弛、断线、防拆、失电和设备故障）、通讯状态等；● 备用电源：系统可配备12V 7AH 蓄电池，保证停电时可持续工作24小时1.2 系统特点:● 智能显示：具备液晶显示，能实时显示每根张力线的静态张力值、松弛报警和拉紧报警阈值；● 参数设置：设置系统参数（型号、线制、松弛阈值、拉紧阈值）操作简洁方便；● 实时调节：可根据环境温度变化自动调节静态张力阈值，每十分钟检测更新一次；● 多种报警功能：如围栏入侵报警、围栏断线报警、围栏松弛报警、主机掉电报警、主机防拆报警、前端探测杆防拆报警等。
● 远程控制：可通过键盘远程操作，最多控制60个防区。
● 围栏线制多样化：本张力控制器可做单防区也可做双防区，前端围栏分别可接4线、5线、6线；1.3系统参数：亲爱的用户，欢迎您选用广拓张力电子围栏。
【推荐下载】蓄电池质保书范本-范文模板 (10页)
本文部分内容来自网络整理，本司不为其真实性负责，如有异议或侵权请及时联系，本司将立即删除！== 本文为word格式，下载后可方便编辑和修改！ ==蓄电池质保书范本篇一：产品说明书安全注意事项●切勿在雷电期间安装电子围栏●切勿将Pte1013直接安装于潮湿场所●除非电子围栏已解除高压，否则切勿触摸系统导体部分●在安装使用本产品之前，对工作人员应预先作好技术培训，安全教育●本产品工作时，内部带有AC220V、50Hz电压；产品的输出端和前端上带有近8000V 脉冲高压，为确保人身安全、设备安全，切勿触及●本产品的使用者，必须具有电器安全及触电解救知识，必须经过专业培训，熟悉本产品的正确使用方法●本产品一旦出现异常情况，应先切断电源，并通知专业安装或检修人员，切勿自行拆修一、功能与特点Pte1013系统把阻挡、威慑和报警三大功能有机地集成在一起，成为一种崭新的智能型周界阻挡安防报警系统。
1.1系统功能1.1.1具有完整的、有明确分界面的电子围栏，具有强大的阻挡作用和威慑作用。
1.1.2具有误报率极低的智能报警功能。
1.1.3备有报警接口，能与其他安防设备联动，提高系统的安全防范等级。
1.1.4判别功能——电子围栏能够智能检测各种侵扰的级别，能显示出前端的负载情况。
区分是动植物干扰还是人为入侵；是偶然入侵还是强行入侵。
偶然入侵者见到警告或受到电脉冲打击后会离开，这时报警器不发出报警。
强行入侵者为获得入侵通道会破坏或翻越电子围栏，在这种情况下，系统会发出报警。
这样，只有在真正有人入侵或破坏系统的时候，才会报警，不会有误报。
1.1.5可连续工作，按需要布防/撤防。
1.1.6系统可配备4AH蓄电池，保证停电时可持续工作。
1.2系统特点1.2.1绝对安全及报警感知性传统的电子围栏警戒系统没有报警感知功能，它仅仅以高压、大电流的方式阻止入侵者。
极易造成入侵者伤残，甚至死亡等严重后果。
Pte1013采用了低频低能量的高压脉冲（5000-8000V）。
电子围栏安装说明书15页word文档
目录前言 (1)安全注意事项 (2)一、功能与特点 (2)1.1 系统功能 (2)1.2 系统特点 (2)二、产品说明 (3)2.1 产品设计依据 (3)2.2 产品特性 (3)2.3 产品技术参数 (3)2.4 LED指示灯状态说明 (4)2.5 电子围栏主机正面、底部接线说明示意图 (4)2.6电子围栏主机功能端接线说明 (4)三、电子围栏设计要求 (5)3.1安全等级 (5)3.2安全性 (5)四、电子围栏前端安装 (6)4.1电子围栏前端安装方式 (6)4.2围栏前端安装角度 (9)4.3终端杆及终端杆绝缘子安装 (10)4.4承力杆及承力杆绝缘子安装 (10)4.5中间杆及中间杆绝缘子安装 (10)4.6紧线器安装 (10)4.7避雷器安装 (11)4.8合金线之间的连接 (11)4.9终端杆固定夹的安装 (11)4.10围栏警示牌的安装 (11)4.11接地 (11)4.12地下布线 (11)4.13常用连线方式 (12)五、电子围栏主机安装与连线 (12)5.1电子围栏主机安装 (12)5.2电子围栏主机与前端连接图 (13)六、电子围栏主机调试与报警试验 (13)6.1通电检查 (13)6.2报警试验 (14)七、键盘直接控制安装说明 (14)7.1键盘可实现的功能 (14)7.2键盘与电子围栏主机连接 (14)7.3键盘设置 (15)八、施工安装规范及安全注意事项 (18)8.1施工安装规范 (16)8.2施工中应注意问题与遇到一些问题排除方法 (17)前言北京世纪天彩科技发展有限公司成立于2019年4月，是一家从事周界安防产品的设计、研发、生产、销售及服务等为一体的专业性高科技公司。
公司具有清华大学，中国公安大学等科研技术背景，在周界安防产品，尤其是脉冲电子围栏研发中具有雄厚的科研技术实力。
一流的产品和优质的服务，是我们的核心竞争力。
我们专注于产品的研发和售后服务，专业的研发团队不断跟踪国内外行业发展动向，根据客户要求开发市场需求的产品。
电子围栏设备说明书
Learn more about fencing by visiting our websites at: FOR OPTIMAL RESULTS, WE RECOMMEND YOU HAVE THE FOLLOWING:1. Electric Fence Tester 2. Three 6-8’ Ground Rods3. Battery Tester (For DC and Solar)4. Three Ground Rod Clamps5. 2 Two Lengths 20 KV Insulated Hook-up Wire (one long enough to connect to fence energizer to ground system and one long enough to fence energizer to fence line)WARNING: THE FOLLOWING CAN RESULT IN DECREASED FENCE PERFORMANCE1. Brush, weed and plant growth around the base of your fence.2. Improper grounding.3. Snow.4. Cracked or broken insulators.5. Fence wires that are less than 4” apart.6. Dry, rocky or sandy soils.7. Insu ciently charged battery.☐WARNING: Read ALL these instructions. Only use electric fence energizer products for the purpose intended as de ned in this manual.☐This controller must be grounded. If it should malfunction or break down, grounding reduces the risk of electrical shock by providing a path of low resistance for the electric current. Grounding this product is provided by properly installed ground rod electrically connected to the fence controller output ground terminal.☐To reduce the risk of electric shock, an AC line operated fence controller has an polarized plug (one blade wider than the other). This plug will t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t, contact a quali ed electrician to installthe proper outlet. Do not change the plug in any way.☐To reduce risk of electrical shock do not remove cover. Refer to service personnel.☐Never electrify barbed wire! The barbs may injure animals if they become tangled in the fence.☐Always disconnect battery-powered fence controllers from the battery before recharging the battery. Failure to do so may damage your fence controller and battery charger, and void your warranty.☐Never run more than on fence controller on the same fence line at one time. The pulses of short shock solid state fence controllers will be too close together and may be hazardous to animals and people. It will also damage your fence controllers.☐Instruct all persons how to disconnect a fence controller in case of emergency. Post signs on electric fences along public roads or near residences.☐Never disconnect wires or approach a fence during lightning storms.☐WARNING: Risk of electric shock! Do not connect an eletric fence to any other device such as a cattle trainer or a poultry trainer. Otherwise lightning striking your fence will be conducted to all other devices.☐Never connect a DC fence to an AC power supply.☐WARNING: Energizers requiring an external ground must be properly grounded.☐WARNING: Many AC energizers are internally grounded and are equipped with polarized 2 prong plugs. These plugs must never be altered and must be inserted into a properly installed, appropriate outlet. Only use a polarized extension cord. Damaged polarized plugs must be replaced with polarizedplugs. failure to follow this warning could create a safety hazard, damage the energizer, and void the warranty.☐Install fence lines powered by seperate fence energizers far enough apart to prevent contact with both fence lines at the same time. Simultaneously touching two fences powered by seperate energizers could be hazardous.☐Install fence lines powered by seperate fence energizers far enough apart to prevent contact with both fence lines at the same time. Simultaneously touching two fences powered by seperate energizers could be hazardous.☐In a double-insulated energizer, two systems of insulation are provided instead of grounding. No means of equipment ground is provided in the supply cord of a double-insulated energizer, nor shoulda means for equipment grounding be added to the energizer. Servicing of a double-insulatedenergizer requires extreme care and knowledge of the system, and should be done only by a serive personnel. Replacement parts for a double-insulated energizer must be identical to the parts they replace.IMPORTANT: Mount inside or in a waterproof enclosure (Required for AC Energizers)AC/DC Inside installationSheltered InstallationInstallationSolar T-Post Installation (applicable for speci c models)Solar Wood Post Installation (applicable for speci c models)Solar Wood Post InstallationSTEP 4: Connect to Fence LinePoly tape connectionAluminum/Steel/Poly wire connectionSTEP 5: Power Fence EnergizerNOTE: Fence energizer will be outputting voltage at this point - to avoid shock do not touch fence terminal orWoodstream gaurantees your satisfaction. You can return product with it receipt to the place of purchase within 30 days for a full refund. Proof of purchase is required for a full refund.LIMITED WARRANTYWoodstream warrants energizers based on their milage rating from the date of purchase (or date of manufacture if proof of purchase is not provided) against defects in materials and workmanship, and from damage caused by lightning. Visit our website at www. to learn more about the warranty that applies to the speci c energizer purchased.For any sized energizer, retain your receipt for proof of purchase or register your energizer online at immediately after purchase. Also, please reference the web page for a list ofCerti ed Repair Centers and instructions on returning fence controllers for service.TERMS APPLICABLE TO BOTH 30-DAY RETURN POLICY AND THE LIMITED WARRANTY. Neither the30-day return policy nor the limited warranty applies to any defect caused by improper installation,misuse, product alterations, tampering, neglect or any similar reason not related to product malfunctionsor defects in the materials or workmanship of the product. The 30-day return policy and the limited warranties are given only to the original purchaser of the product and not to any subsequent owners orto any other user or person when installed and used in accordance with the instructions found in theowner’s manual. No person is authorized to grant any warranty additional to or di erent from thiswritten warranty.To make a warranty claim, you must contact Woodstream Corp. at 800-800-1819 or regarding defective product or parts during the warranty period or contact one of the Certi ed Repair Centers listed on If you have not registered your energizer online immediately after purchase, you may need to provide additional information such as, your name, mailing address, proof of purchase date and a description ofthe problem. If the defect is covered by the limited warranty, Woodstream Corp. or a repair center willrepair or replace (at its option) the defective product or parts.NEITHER THE SELLER NOR THE MANUFACTURE SHALL HAVE LIABILITY FOR ANY ACCIDENTIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM OR CAUSED BY ANY DEFECT, FAILURE OR MALFUNCTION OF ANY PRODUCT.Part # EC-ENGMANUALSERIAL NUMBER INFORMATIONThe serial number for all Woodstream Corp. fence energizers will go to a 12 digit serial number. The format for the 12 digit serial number is as follows:EC XX XX XX XXXXCategory Year Month Day Serial numberIf no sales receipt is provided with the return, we will use the date of manufacture shown in the serial number.Please contact Woodstream Corp. for all warranty claims or returns:Woodstream Corp.69 North Locust Street Lititz, PA 17543855-592-7322LIMITATION OF DAMAGESThe directions for use of this product should be followed carefully. It is impossible to eliminate all risk inherently associated with use of the product. The e ectiveness of Woodstream brands of fence controllers may depend on the e ectiveness of connections, interruption of power source, accidential grounding of wires, weatherconditions or the manner of use or application, all of which are beyond the control of Woodstream or the seller. All such risks shall be assumed by the buyer.Woodstream warrants that this product is reasonbly t for the purposes referred to in the directions for use, subject to the inherent risks referred to above. Woodstream makes no other expressed or implied warranty of tness or merchantability or any other expressed or implied warranty. IN NO CASE SHALL WOODSTREAM AND THE SELLER BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INDIRECT DAMAGES RESULTING FROM THE USE OR HANDLING OF THIS PRODUCT. WOODSTREAM AND THE SELLER OFFER THIS PRODUCT AND THE BUYER AND USER ACCEPT IT, SUBJECT TO THE FOREGOING CONDITIONS OF SALE AND WARRANTY WHICH MAY BE VARIED ONLY BY AGREEMENT IN WRITING SIGNED BY AN OFFICER OF WOODSTREAM.Some states, however, do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This limited warranty gives you speci c legal rights, and you may also have other rights which vary from state to state.。
【精编范文】围栏使用说明-范文模板 (11页)
本文部分内容来自网络整理，本司不为其真实性负责，如有异议或侵权请及时联系，本司将立即删除！== 本文为word格式，下载后可方便编辑和修改！ ==围栏使用说明篇一：电子围栏说明书一、系统概述Greatwall Auto Power(GW-AP)电子围栏周界防范系统由脉冲电子围栏主机（也叫围栏控制器或脉冲发生器）、前端（带脉冲高压的围栏）与报警信号的传输三部分组成。
主机产生脉冲高压供给电子围栏以探测入侵者，并能发出报警信号；电子围栏前端包括终端杆、承力杆、中间杆、合金线、紧线器、线线连接器、绝缘子、警示牌、固定件等。
1.1功能及特点1)引进目前世界上最先进的安防理念：“阻挡为主，报警为辅”，带有高压脉冲电压的前端围栏给入侵者极大的威慑感，同时又给入侵者带来了很多阻碍，大大增加了其翻越围墙的机会成本。
2)具有威慑、阻挡、报警三重功能。
3)专利的触网探测技术是电子围栏真正实现触网、短路、断路三种报警模式。
4)安全可靠，系统采用高电压、低能量的设计思路，对人体生命不会构成危害。
5)高低压两种探测模式：用户可以根据不同的需求进行自由切换，在白天或有人员在围栏附近作业时切换到低压模式，使脉冲打击力度更小；在夜间可以恢复到高压脉冲模式。
6)主机面板上有LCD液晶屏，可显示出脉冲电压、布撤防、触网、短路、断线各种状态。
7)可以配备DC12V/7AH蓄电池,能够在220V断电后继续正常工作。
8)不受气候、植物、小动物等因素影响，误报率低。
9)无盲区、无死角，前端围栏是有形的围栏，可以随着地形的高低起伏任意架设，可以做到不疏不漏。
1.2应用范围广泛适用于变电站、小区、别墅、学校、牧场、工矿企业、水厂、电厂、物资仓库、军事设施、监狱、看守所等场所。
二、系统的工作原理Greatwall Auto Power输出为低频脉冲信号（该脉冲信号为每秒1次，空度比1/10），通过高压绝缘导线施加于前端围栏的始端。
脉冲信号沿着电子围栏的导线由始端传向终端。
3.2周界电子围栏说明书
本产品获得国家公安部权威认证本产品由太平洋保险公司承保优周高低压脉冲电子围栏产品使用说明手册前言本系统依照中华人民共和国公共安全行业标准以及上海市公安局技防办关于保安系统的有关规定，本着对客户负责的精神，力图达到较高的性能价格比。
本系统以“阻挡为主，报警为辅”的周界安全理念，园区的电子围栏系统注重整体功能完备，系统可靠安全，配置科学合理。
周界防攀越、阻挡报警系统实现基于同一操作平台上的集中控制和功能集成，从而形成功能更加强大、操作更加简单的安保体系。
为使本系统达到技术成熟，经济实用，安全可靠，质量优良的要求，而且是不间断、全天候式的，请严格按照说明书来操作。
目录一、功能与特点 (1)1.1 系统功能 (1)1.2 系统特点 (2)二、产品说明 (3)2.1 产品设计依据 (3)2.2 产品特性 (3)2.3 产品技术参数 (4)2.4控制器主机内部及遥控器说明示意图 (5)2.5控制器主机功能端接线说明 (10)三、电子围栏设计要求 (10)3.1安全等级 (10)3.2安全性 (10)四、电子围栏前端安装 (12)4.1前端安装方式 (13)4.2周界围栏安装角度 (15)4.3终端杆及终端杆绝缘子安装 (16)4.4中间杆及中间杆绝缘子安装 (16)4.5收紧器安装 (17)4.6避雷器安装 (17)4.7合金线之间的连接 (18)4.8围栏警示牌的安装 (18)4.9接地 (18)4.10地下布线 (18)4.11常用连线方式 (19)五、电子围栏设计需求分析 (19)5.1电子围拦系统布线示意图 (19)5.2电子围栏系统组成部分 (20)5.3控制端控制方式 (20)5.4电子围栏周界需求分析 (20)六、主机安装与连线 (21)6.1主机安装 (21)6.2安装配件 (21)6.3主机与围栏连接图 (22)七、主机调试与报警试验 (26)7.1通电检查 (26)7.2报警试验 (26)八、计算机直控软件安装 (27)九、施工安装规范及安全注意事项 (28)9.1施工安装规范 (28)9.2施工中应注意的其他问题 (29)十、附录A 脉冲电子围栏案例欣赏 (30)附录B安全注意事项 (32)一、功能与特点高低压系列脉冲主机产品主要有三大功能：1.威慑功能 2.阻挡功能 3.报警输出。
电子围栏键盘控制器说明书
电子围栏键盘控制器说明书型号：电子围栏键盘控制器本型号的电子围栏键盘控制系统使用的电子围栏主机有：四线制LCD电子围栏主机、四线制LED电子围栏主机、六线制LCD电子围栏主机、六线制LED电子围栏主机。
目录电子围栏键盘控制器简介.......................................................................................................... - 1 -一、按键定义说明...................................................................................................................... - 2 -1.1、F1按键....................................................................................................................... - 2 -1.2、F2按键....................................................................................................................... - 2 -1.3、F3按键....................................................................................................................... - 2 -1.4、F4按键....................................................................................................................... - 2 -1.5、* 按键........................................................................................................................ - 2 -1.6、# 按键........................................................................................................................ - 2 -1.7、0～9 数字按键.......................................................................................................... - 2 -二、常用操作说明...................................................................................................................... - 3 -2.1、密码操作.................................................................................................................... - 3 -2.2、打开或关闭防区操作................................................................................................ - 3 -2.3、防区编号修改操作.................................................................................................... - 3 -2.4、防区的布防和撤防操作............................................................................................ - 3 -2.5、防区实时状态查看操作............................................................................................ - 4 -2.6、报警信息的查看操作................................................................................................ - 4 -2.7、报警复位操作............................................................................................................ - 4 -2.8、报警灵敏度操作........................................................................................................ - 4 -2.9、报警输出时间设置操作............................................................................................ - 4 -三、其他几个特别的说明.......................................................................................................... - 5 -3.1、报警声音及报警提示音说明.................................................................................... - 5 -3.2、无线控制功能说明.................................................................................................... - 5 -3.3、多点控制功能说明.................................................................................................... - 5 -3.4、自动布撤防功能说明................................................................................................ - 6 -3.5、脉冲幅值及脉冲周期设置功能说明........................................................................ - 6 -3.6、液晶背光说明............................................................................................................ - 6 -四、电子围栏键盘控制器的10孔接头说明............................................................................ - 6 -五、电子围栏键盘控制器的常见问题解决方法...................................................................... - 7 -5.1、键盘控制器屏幕不亮................................................................................................ - 7 -5.2、布撤防控制时脉冲主机没有响应............................................................................ - 7 -5.3、报警恢复后还是会有提示音.................................................................................... - 7 -电子围栏键盘控制器简介本键盘控制器具有以下的优点：◆具有自动定时布撤防功能，自动布撤防的时间以及防区状态可以自由设定,能够智能自动的对防区进行布撤防控制；◆具有市电断电和恢复提示功能，能够及时的提醒用户各个主机的电源状态；◆具有通信失败报警功能，能够及时的提示用户各个脉冲主机与控制室之间的通信线路故障；◆具有无线控制功能（本功可选配），可以多个无线遥控器一起控制；◆可以2个控制点同时进行控制；◆可以通过RS485总线对多达32个电子围栏防区进行全面控制；◆可以对全部或部分防区进行关闭、布防、撤防，各个防区高低压转换功能；◆对电压可调的脉冲主机，可以设置该主机的脉冲输出电压值；◆对脉冲周期可调的脉冲主机，可以设置该主机的脉冲周期值；◆可以自动记录最新的128条报警信息，报警信息详细明了（包括报警防区号，类别（短路、断路、防拆），报警时间）；◆有报警时，会自动的突出显示正在报警的信息；◆轮巡一周的时间短，可以快速的反映防区状态以及报警信息；◆可以对各个防区的围栏主机进行报警复位；◆可以任意设定围栏主机的防区号；◆可以设定围栏主机的报警灵敏度；◆可以设定围栏主机的报警输出的时间；◆可以设定整个系统的时间；◆可以循环显示已经打开的防区的状态信息（包括防区输出的实际电压值或者防区的报警状态）；◆具有通用的开关量报警输出功能；◆智能关闭液晶背光，更节能省电；◆界面友好，人性化操作；◆具有密码登录功能，安全可靠，同时还可以对密码进行修改；一、按键定义说明1.1、F1按键此按键有两种功能：(1). 为“确认”按键。
电子围栏说明书英文版
电⼦围栏说明书英⽂版Directory preface (2)safe note (3)⼀.function and feature (4)1.1 function (4)1.2 feature (4)⼆、instruction (5)2.1 design basis (5)2.2.characteristic (5)2.3 technical index (5)2.4 LEDindicated (5)2.5The front ,bottom of controller (6)2.6wire connection instruction (6)三、design requirement (6)3.1safety level (6)3.2 security (7)四、installation (7)4.1 install mode (7)4.2 install angle (9)4.3terminal rod/insulator install (9)4.4 middle rod/insulator install (10)4.5middle pull rod/insulator install (10)4.6 tensioner install (10)4.7lightning-arrester (10)4.8alloy wire connection (11)4.9grounding (11)4.10ground wirin g (11)五、controller install &connection (11)5.1controller install (11)5.2controller and fence connection (12)六、debug and alarm test (12)6.1 electrify check (12)6.2alarm test................................... .. (12)七、install rule & security note (15)8.1 install rule (15)8.2 safety note and some removing methods (16)Prefaceshanghai Yi Section Company is specialized in manufacturing electric security fence with its own R&D department factory located in Shenzhen.Yi Section company persistently follows the principle"do everything with whole hearted", through superior quality and zealous service, Yi Section tries every efforts to respond the users that gives uslong-term support and trust.Pulse electric fence energizer and perimeter accessory that Yi Section products and develops conforming to the requirements of GB/T7946-2008《pulse electric fence installation and safe operation》and meet CEI-61011 international electric fence standard. The patent water proof casing design, professional output method, advanced difference voltage output technology, unique LCD display function, make the products as the leader in the industry. The products sell to Unite States, Europe, Australia, Africa, and Asian country , Yi Section will be the base of international production and service. The products are widely used in ware house, industry areas, power station, private house, villa, school, car parks, plant areas, airpot, prison, military base.etc.Security note:◆Unless high/low voltage output disarmed of electric fence, don’t touch the conductor part of the system.◆Don’t install electric fence during the thunder, don’t install controller in moist place.◆Before install and use the product, do the safe educational technology training work.◆During the installation, in order to use normally in future, follow the instructions to make sure the grounding of products. Refer to “4.9 item”◆When the product is electrified , the inside of controller is 220v 50Hz AC current, 5-10KV high voltage pulse on the output port and electric fence, don’t touch it to make sure security.◆The user must know the related electric device knowledge, and read the user instruction and operate it carefully before install it with correct use methods, otherwise , our side don’t bear any responsibility if any accident arise.◆Once abnormal case happen, should make sure the power off, then professional staffs check and analysis repair or contact our company, don’t repack it by your own.⼀．Function and featureThere are two kinds of existing security products. One kind is a fence, like traditional brick wall, cement wall, glass wall, iron fence and so on, has the obvious contours, encircles the defense area, has the impediment external invasion function, but does not have the alarm and the surveillance function. Another kind is the alarm system, like the infrared correlation alarm apparatus, divulge electric cable, CCTV and so on, they have the alarm or the surveillance function, but does not have the impediment function.The smart pulse electric fence system integrate the prevents and alarm functions together, and increase the high voltage deterrent effect, not only have visible fence, but also have smart multi-zone controller, the alarm system becomes brand new perimeter security system.1.1 system function1.1.1 have complete and explicit dividing line fence,and formidable impediment and deter function.1.1.2 have low rate of false alarm function,when the outer fence alarm,the display windows rapidly display which zone suffers break,short-circuit and tamper, reflect the current condition.1.1.3 The DC 12V alarm connection,dry contact signal output, can linkage with other security system, improve the system’s safe rank.1.1.4 distinction function of electric fence and can detect all kinds of invasion rank, can differentiate the accidental invade from forceful invade ability.The accidental intruder see the alarm or suffer from the electric shock, the leave, the alarm apparatus do not send out alarm. The intruder invade forcefully , so that the electric fence will be destroyed, in this case, the system will send out alarm. Only the intruder really invade and destroy the system, then will send alarm, will not alarm mistakenly and fails to alarm.1.2 system feature1.2.1Absolute safety and alarm perceiveThe traditional high voltage pulse electric net system doesn’t have alarm perceive function, only through high voltage, strong current to impediment intruder. It is very easy to get intruder disable, even dies and so serious results. The smart pulse electric fence system adopts low energy pulse high voltage(（5～10KV）,because the energy is extremely low,the response time is extremely short, will not cause the damage to the humanbody. Once touched, will just leave dut to electric shock.1.2.2The low rate of false alarm and strong AdaptabilityThe smart pulse electric fence system is not affected by environment (for example. trees, animals, shake.etc ) and climate ( wind, snow, rain and fog,etc) and not limited by terrain height and winding degree. The rate of false alarm is very low.1.2.3 impediment and alarm dual functionThe new concept of smart pulse electric fence system is to prevent the intruder out of from the fence area,without the crime is the goal, give the intruder one kind of deterrent feeling and impediment function, dare not act rashly, achieve the security, reduces the crime.1.2.4 continuous work,set armed/disarmed .1.2.5 use the 12V/4Ah battery as backup power supply,when the power supply is off,can work continually.1.2.6 According to user’s request and site geographical environment, carry out the design and installation, and workwith multiple modern security products, such as CCTV monitored system, television supervisory system andGSM system to improve the system security ranks.1.2.7 Absolute safety, conforms to the international CE certification and is also in conformity with IEC 60335-2-76 andthe GB/T7946-2008 request, and get approved from public security form test.⼆、product instructions2.1 product design basis:GB/T7946-2008 "Pulse electric fence installation And Safe operation"2.2 product characteristic:● difference voltage output technology: every wire has voltage, have the differential voltage between the two adjacent wires.●LCD display the monitor state indicating the voltage on every wire.● high/low voltage switch manually, long-distance equipment auto switch function.●short circuit, break and tamper alarm, equipment fault auto-detect..●waterproof casing and downward appearance design guiding the industry development.●RS 485 main line control, keypad, computer, network and multiple long distance management solution.●DC12V, open/close dry contact alarm output, can work with other modern security products..2.3 product technical index2.3.1 power supply: AC180V-240v 50Hz2.3.2 use environment2.3.2.1 Temperature ：-40-+50℃2.3.2.2 moisture: ：≤95%2.3.3 output index:Output peak voltage:5KV～10KVOutput low voltage: 700～1000VPeak current of pulse: <10APulse duration: ≤0.1sPulse interval time: 1sMax quantity of electricity of pulse: 2.5mCMax energy of pulse: ≤5.0JSystem power consumption: 10w2.4 LED indicated lamp condition instructions:2.4.1 AC 220V or DC12V,when power supply input ,the green indicated lamp is bright.2.4.2 when armed,the yellow indicated lamp is bright. When disarmed,it shows off.2.4.3 when alarm break,the red indicated lamp is bright.2.4.4 when alarm short circuit,the red indicated lamp is bright2.4.5 when open cover, the red indicated lamp of tamper is bright.2.5 the front and bottom of controller instructions.2.6 the wire connection of controller instruction( above drawing)2.6.1 the controller comprise two parts: input and output,the positive pulse from output part”1st line high voltage output port”transfer to fence wire, then return back to the receiver part “ 1st line high voltage input port”, negative pulse from output”2nd line high voltage output port” transfer to fence wire, then return back to the receiver part” 2nd line high voltage input port” ,so form positive and negative pulse closed circuit on the front fence.2.6.2 high voltage earth output: can share the same earth output with lightning arrester, strong/weak earth separate.2.6.3 voltage switch: use for switching high/low voltage mode or automatic working mode.2.6.4 keypad output: can connect keypad directly or RS485 transfer RS 232,then connect to computer by long distance control, The RS 485 connection of each controller needs to go hands by hands connection, multiple connection is not allowed.2.6.5 switch output: output open/close dry contact signal, needs to connect with other linkage device.2.6.6 alarm output: when alarm, output DC 12V voltage, connect with alarm device DC 12v below 10W.2.6.7 power switch: control the energizer on/off.2.6.8 power supply input: connect AC 220V power source.三、design request of electric fence3.1 according to different security rank, configurate suitable electric fence,usually divide into Ι、Ⅱ、III th e three rank.Ι—general security rank, uses 4 lines system, the monitor zone partition does not surpass 500 meters.Ⅱ—medium security rank, uses 8 lines system, the monitor zone partition does not surpass 250 meters.III—higher security rank, uses 12 lines system, the monitor zone partition does not surpass 100 meters.Every zone must configurate independent controller, and have different triggered alarm apparatus, can indicate the alarm zone number. The alarm output usually linkage with CCTV, red-infrared correlation, spotlight, alarm apparatus etc. When applied, the length of monitor zone should set according to the perimeter total length, the terrain and the objective site environment.3.2 Security3.2.1 don’t allow get the AC power supply on electric fence. when the product gets faulty, please make sure the electricfence without any AC power supply.3.2.2 product used the rectification voltage dropping DC 12V, then voltage-rise to condenser charge, finally electriccapacity pulse discharge boosting transformer, the output energy is limited by rectification, primary voltage-rise, electric capacitance discharge, so many links, without harm to human body and absolute safety.3.2.3 association factor and the influence of electric shock:The electric pulse will not injure the intruder, to avoid the associated responsibility, firstly, electric fence warning signs should hang up at every other 10 meters striking position noted” electric fence, forbid climbing”, secondly, the height of electric fence should be above 1.8meters, if the height of electric fence is not high, should install isolated netting or wall to avoid accident.3.2.4 electric fence should not be with other power circuit and telecommunication wires on the same pole.3.2.5 electric fence should keep a certain safe distance from the power circuit. The minimum distance as shown in thetable 3-13.2.6 horizontal distance between electric fence and public rod border should be above 5m( except the electric fence on top of the wall)3.2.7 electric fence has pulse high voltage, when bad connection or close to charged conductor, will have fire spark.Thus, electric fence should install without any flammable gas, and without any flammable fluid place. Accordingto the related national standard, keep enough safe distance, or take the safe measures to isolate.3.2.8 When inspect the place to install electric fence, pls make sure the electric fence without any conflict with theelectric wire, pipeline from the ground. And without any sundry goods at nearby place, whether the electric fence is influenced strongly by transmitting station and other high frequency device. If have, must mark the signal wire with STP shielded twisted pair at the construction drawing.四、Electric fence install4.1 install mode:4.1.1 install on top of the wall.Install the electric fence on top of wall, the height of fence wall should be above 1.8meters, the wire pole/rod may have welding ,clip or buried the three modes, should choose suitable mode according to the fence structure condition. For example, install at the steel fence, can take the welding, install at the concrete wall, can take buried mode to make sure stable, artistic, may use other modes also.4.1.2 The attached installThe installation attaches on the fence or top or inside, the fence wall directly withstanding the pressure and wire tension, before installation, pls make sure the structural strength of the wall, if unreliable, should reinforce in advance. The metallic conductor wire from the front end of electric fence spacing to the wall should be smaller than 700mm.4.1.3 stand alone electric fenceInstall the electric fence around the building, because the height is above 1800mm, the wire number reaches 8-20, the strength of the wire to the terminal rod/pull rod tensity must be big, hence, terminal rod/ pull rod must have enough strength, and the embedment must be stable. If the soil is solid, may directly bury the wire of terminal rod and pull rod ends to underground 60cm to do fixed. If the rigidity of terminal wiring rod is insufficient, should increase the support rod. Although the middle pull rod does not withstand the tensity of wire, but must support the pressure of multiple wires. Therefore, also needs to install it stably.May take buried mode installation. Follow the chart 12 wires stand alone installation.4.2 electric fence installation angle: ( the angle with wall) see the right drawing.4.2.1 according to the site condition and the first party request(（0°、22.5°、45°、67.5°、90°、112.5°、135°、157.5°、180°）and the inclined direction( inclination angle, camber angle, vertical or horizontal ) installation.4.2.2according to the perimeter condition:if resident area, school nearby, suggested byinclination angle or vertical installation,spacious area suggested to install bycamber angle, if the height of wall is above2.5meters, take horizontal installation.4.2.3 According to the protection object: if prevent from outside invasion, suggest camber angle installation, if prevent from interior climbing, suggest inclination angle installation.4.3 terminal rod/terminal rod insulator installationFix the terminal rod insulator on the terminal rod throughterminal insulator clip, considering the distance is longer, the pullingstrength is bigger, every 100 meters or big corner and divided zonemust be set a terminal rod, see the right drawing：4.4 middle pull rod/middle pull rod insulator installation.The middle pull insulator assembles on the rod through screws or use pinlock to fix it. Should note the direction of installing, usually every 20 meters to set a middle pull rod. See the rightdrawing:4.5 tensioner installationThe middle tensioner usually hang on the front of electric fence,when install alloy wire, penetrates the wire from the tensioner side’s round hole, aim and pass the middle hole, finally gets out from another side round hole. See the chart. Note, don’t make the tight line excessive, heat expanded and cold contracted, it maybe break in winter weather.4.6 lightning arrester installationFirstly fix the lightning arrester on the top of terminal rod,then through the own nuts fixing on the frame, the lightning arrester usually installs on top of pulse energizer, every zone must install two lightning arresters.4.7 a lloy wire connectionConnect it by wire linker, need connect the lead end to penetrate thewire linker, then use nut to contract wire in the wire linker. See theright drawing:4.8 warning signs installationAccording to the condition, every 10 meters set as one warning signs.4.9Grounding/earthgrounding request: according to “GB/T 7946-2008”, earth principle and weak electricity separated. The electric fence system includes: controller high voltage output earth, lighting arrester earth, protective earth output, the three kinds of earth. High voltage earth and lightning arrester earth can share the same earth, but must separate from protective earth, and the earth pole distance is above 10meters, the earth pole depth of burying is above 1.5m, the resistance value of weak electricity should be below 4Ω, the resistance of high voltage earth should be below 10Ω,the lightning arrester earth connects reliably by square millimeter copper wires.。
思特电子高低压系列脉冲电子围栏安装、使用说明书
思特电子--专业安防报警系统解决方案提供商1目录一、功能与特点 (4)1.1系统功能 (4)1.2系统特点 (5)二、产品说明 (6)2.1产品设计依据： (6)2.2产品特性 (6)2.3产品技术参数： (7)2.4端口功能说明： (8)2.5控制主机内部接线及遥控器说明示意图 (11)2.5.1电子围栏主机正面示意图： (11)2.6控制器功能端接线说明： (19)三、电子围栏设计要求 (19)3.1安全等级 (19)3.2安全性 (20)四、电子围栏前端安装 (21)4.1前端安装方式 (21)4.1.1墙顶式安装（4线） (21)4.2周界围栏高度安装角度：（与墙顶面的夹角） (24)4.3终端杆及终端杆绝缘子安装 (25)4.4中间杆及中间杆绝缘子安装 (26)4.5收紧器安装 (27)4.6避雷器安装 (27)4.7合金线之间的连接 (28)4.8围栏警示牌的安装 (29)4.9接地 (29)4.10地下布线 (30)4.11常用连线方式 (31)五、电子围栏设计需求分析 (32)5.1电子围栏系统布线示意图 (32)思特电子--专业安防报警系统解决方案提供商25.2电子围栏系统组成部分 (32)5.3控制端控制方式 (33)5.4电子围栏周界需求分析 (33)六、主机安装与连线 (34)6.1主机安装 (34)6.2安装配件 (34)6.3控制主机与电子围栏主机连接示意图 (35)6.4电子围栏安装步骤图 (39)6.5总线报警系统与电子围栏综合应用示意图 (42)6.6电子围栏主机网络传输报警示意图 (43)七、主机调试与报警试验 (44)7.1通电检查 (44)7.2报警试验 (44)八、施工安装规范及安全注意事项 (45)8.1施工安装规范 (45)8.2施工中应注意的其他问题 (46)产品保修登记卡 (46)附录A高压脉冲电子围栏案例欣赏 (46)附录B安全注意事项 (48)思特电子--专业安防报警系统解决方案提供商3一、功能与特点高低压系列脉冲电子围栏主机产品主要有三大功能：1.威慑功能2.阻挡功能3.报警输出。
电子围栏安装说明书新原word资料14页
智能型脉冲电子围栏周界报警系统安装说明书目录一、功能与特点 (1)1.1 系统功能 (1)1.2 系统特点 (1)二、产品说明 (2)2.1 产品设计依据 (2)2.2 产品特性 (2)2.3 产品技术参数 (2)2.4 LED指示灯状态说明 (3)2.5 电子围栏主机正面、底部接线说明示意图 (3)2.6电子围栏主机功能端接线说明 (3)三、电子围栏设计要求 (4)3.1安全等级 (4)3.2安全性 (4)四、电子围栏前端安装 (5)4.1电子围栏前端安装方式 (5)4.2围栏前端安装角度 (7)4.3终端杆及终端杆绝缘子安装.................................................................................................... . (8)4.4承力杆及承力杆绝缘子安装........................................................................................................... (8)4.5中间杆及中间杆绝缘子安装............................................................................................................ .. (8)4.6紧线器安装................................................................................................................................... . (9)4.7避雷器安装............................................................................................................................... .. (9)4.8合金线之间的连接................................................................................................................. . (9)4.9终端杆固定夹的安装.......................................................................................................... . (9)4.10围栏警示牌的安装....................................................................... .. (9)4.11接地............................................................ . (9)4.12地下布线 (10)4.13常用连线方式 (10)五、电子围栏主机安装与连线 (10)5.1电子围栏主机安装 (10)5.2电子围栏主机与前端连接图 (11)六、电子围栏主机调试与报警试验 (11)6.1通电检查 (11)6.2报警试验 (12)七、键盘直接控制安装说明 (12)7.1键盘可实现的功能 (12)7.2键盘与电子围栏主机连接 (12)7.3键盘设置 (12)八、施工安装规范及安全注意事项............................................................................................... . (14)8.1施工安装规范 (14)8.2施工中应注意问题与遇到一些问题排除方法.................................................................... .. (15)一、功能与特点现有的周界安防产品有两大类。
六线制电子围栏说明书
电子围栏说明书●使用前请仔细阅读本说明书●本说明书适用于电子围栏主机系列产品●本说明书包含服务指南，请务必妥善保管目录第一章产品介绍............................................................................................................................................................ - 2 -1.1 产品设计依据................................................................................................................................................... - 2 -1.2 产品特性........................................................................................................................................................... - 2 -1.3 产品技术参数........................................................................................................................................... - 3 -1.3.1供电电源................................................................................................................................................. - 3 -1.3.2使用环境................................................................................................................................................. - 4 -1.3.3输出参数................................................................................................................................................. - 4 -1.4 产品分类功能特点........................................................................................................................................... - 4 -1.4.1按显示分类............................................................................................................................................. - 4 -1.4.2按线制分类............................................................................................................................................. - 4 -1.4.3按防区分类............................................................................................................................................. - 5 -1.5 控制器底部接线说明示意图........................................................................................................................... - 5 -1.5.1四线制单防区主机底部接线说明......................................................................................................... - 5 -1.5.2四线制双防区主机底部接线说明......................................................................................................... - 6 -1.5.3六线制单防区主机底部接线说明......................................................................................................... - 6 -1.5.4六线制双防区主机底部接线说明......................................................................................................... - 7 -1.6 控制器主机的接口功能说明........................................................................................................................... - 7 -1.7主机控制面板按键说明.................................................................................................................................... - 8 -1.8 主机前段施工示意图....................................................................................................................................... - 9 -1.8.1主机前端施工实物图............................................................................................................................. - 9 -1.8.2主机前端示意图..................................................................................................................................... - 9 -1.8.3主机控制方案图................................................................................................................................... - 10 - 第二章主机调试与报警试验...................................................................................................................................... - 12 -2.1 通电检查......................................................................................................................................................... - 12 -2.2 报警试验......................................................................................................................................................... - 13 - 第三章使用与维护...................................................................................................................................................... - 13 -3.1 检查................................................................................................................................................................. - 13 -3.2 蓄电池管理..................................................................................................................................................... - 14 -3.3 常见问题处理................................................................................................................................................. - 14 -3.3.1避雷器接法........................................................................................................................................... - 14 -3.3.2主机开机报警....................................................................................................................................... - 14 -3.3.3警号连接............................................................................................................................................... - 15 -3.3.4开关量联动警号、警灯....................................................................................................................... - 15 -3.3.5开关量接报警主机............................................................................................................................... - 15 -3.3.6通讯失败............................................................................................................................................... - 15 -3.4 注意事项......................................................................................................................................................... - 17 -3.5 使用................................................................................................................................................................. - 17 -3.6 日常维护......................................................................................................................................................... - 17 -第一章产品介绍1.1 产品设计依据GB/T7946-2008《脉冲电子围栏及其安装和安全运行》JB/T5163-2007《中华人民共和国机械行业标准》1.2 产品特性电子围栏系统，就是在非出入通道的周边区域设置脉冲电子围栏探测器，形成一道电子围墙进行防范和管理。
电子围栏说明书
前言澳大利亚帕克顿（PAKTON）公司，是世界上最大的电子围栏专业生产厂商之一，总部设在澳大利亚昆士兰。
共生产两大系列几十个型号的电子围栏能量供应器，其产品销往欧、美、亚、非等世界各地。
澳大利亚帕克顿（PAKTON）公司研制成功的一种新颖的周边安防产品——Pte1013电子围栏能量供应器（以下简称Pte1013），它既能产生高压脉冲又能产生低压脉冲，是国内较新的产品。
Pte1013主要有四大功能：1. 威慑功能 2. 阻挡功能3. 报警输出4.智能显示功能。
首先给企图入侵者一种威慑感觉；其次增加了围墙的高度，使入侵者难以攀越，延长了翻越的时间；如果强行入侵或破坏系统，系统便能发出报警，而且系统还有报警输出，能与其他的安防系统联动，提高了系统的安全防范等级；智能显示窗可以显示出系统运行的情况，这是目前国内最领先的技术。
Pte1013将四大功能有机地结合在一起，因此可以大大降低案发率和误报率。
Pte1013主要用于周界安全防范。
可适用于工矿企业、仓库、变电站、停车场、养殖场、机场、监狱、农场、军事设施、住宅小区等等。
该产品在美国、新西兰、澳大利亚、以色列、南非等已广泛使用，成为周界安防系统中值得信赖的品牌。
目前已进入中国，由上海广拓信息技术有限公司总代理。
安全注意事项●切勿在雷电期间安装电子围栏●切勿将Pte1013直接安装于潮湿场所●除非电子围栏已解除高压，否则切勿触摸系统导体部分●在安装使用本产品之前，对工作人员应预先作好技术培训，安全教育●本产品工作时，内部带有AC220V、50Hz电压；产品的输出端和前端上带有近8000V脉冲高压，为确保人身安全、设备安全，切勿触及●本产品的使用者，必须具有电器安全及触电解救知识，必须经过专业培训，熟悉本产品的正确使用方法●本产品一旦出现异常情况，应先切断电源，并通知专业安装或检修人员，切勿自行拆修一、功能与特点Pte1013系统把阻挡、威慑和报警三大功能有机地集成在一起，成为一种崭新的智能型周界阻挡安防报警系统。
脉冲式电子围栏
字母B开头的为－个防区 B1-,B2-连接 B1+,B2+连接
G5,T7双防六线主机围栏接线图
AA+ A1A1+ A2A2+
BB+ B1B1+ B2B2+
字母A开头的为－个防区 A-,A1-,A2-连接 A+,A1+,A2+连接
字母B开头的为－个防区 B-,B1-,B2-连接 B+,B1+,B2+连接
• □多电源供电方式：AC220V、AC24及DC12V都可作为供电电源，供电 灵活方便，大大提升了环境适应能力； • □常闭/常开报警信号双输出，可根据不同报警联动产品对报警输入 信号的要求，选择常闭报警信号输出或常开报警信号输出； • □ 具有485总线通讯功能；
主要技术参数
外形尺寸 32 cm×22 cm×11.7cm
输送到脉冲电子围栏前端( 合金线) ， 脉冲电子围栏主 机通过监测脉冲电路是否有短路或断路情况， 来判定
是否发生入侵， 当有入侵时，脉冲电子围栏主机同时
发出入侵报警信号至报警联动装置和控制装置。
4
原 理
从脉冲主机上发射出分为正负两个回路的高压脉冲,正高压在正5000V至正 10000V的高压脉冲电,负高压在负5000V至负10000V的高压脉冲电,正负相间,任 何一根线和大地之间都有5000V以上的电压差,任何相邻两根线都有将近10000V 的电压差,
供电电源
使用环境
报警延时 额定功率 脉冲特性
绝缘电阻
AC220V（±10%） 50Hz； AC24V ＞30W； DC12V ＞30W 温度：－40℃～+55℃ 相对湿度≤95% 2s 30W
高压5000V～10000V 低压500V～1000V 脉冲频率：信号每秒1次，空度比1/10 电源插头与外壳裸露金属部件之间的绝缘电 阻＞100MΩ。
张力式电子围栏防入侵报警系统安装、调试及维护手册说明书
张力式电子围栏防入侵报警系统安装、调试及维护手册（版本号V1.0）北京长城卫士安全系统技术有限公司北京长城卫士安全系统技术有限公司上海分公司制造商：上海国沃电子科技有限公司目录一、系统特点 (2)二、张力围栏系统工作原理 (2)三、张力围栏的安装 (3)3.1.张力式电子围栏的设计 (3)3.2.张力式电子围栏的安装 (4)3.2.1.张力围栏的杆体及底座 (4)3.2.2.张力终端杆和张力万向底座的安装 (5)3.2.3.张力终端杆和张力传感器的安装 (6)3.2.4.张力受力终端杆的安装 (6)3.2.5.张力过线杆的安装 (7)3.2.6.受力终端杆、张力弹簧和钢丝绳的连接 (8)3.2.7.张力传感器、绝缘子、紧线器和钢丝绳的连接 (8)四、张力电子围栏产品接线说明 (9)4.1.张力传感器 (9)4.2.张力控制器 (10)五、系统调试 (13)5.1.准备 (13)5.2.张力控制器设置 (13)六、系统维护和常见问题说明 (15)6.1. 系统维护 (15)6.2. 常见问题说明 (15)手册使用说明范围本手册介绍了长城张力围栏控制/ 通讯主机的基本安装和设置方法.准确性本手册已经过校对并保证其准确性。
然而，对于用户在使用过程中由于对手册内容的误解、误操作而导致的任何后果，本公司恕不承当任何责任。
另外，本公司有权对张力围栏控制/ 通讯主机的硬件、软件和手册作进一步升级或修改而不另行通知。
一、系统特点周界防范报警系统是为防范从周边围墙或栅栏非法出入者而设置的技术防范系统，是安全防范系统的第一道防线。
系统要求当出现非法越墙（或越栏）时，能发出声光报警，同时在报警管理中心能立即收到报警信息，并联动相关设备。
张力式智能电子围栏防入侵报警系统是周界防入侵报警产品中的一种。
它即是防止人体逾越的实体防护设施，又是周界防入侵报警系统的前端探测设施，能有效探测报警，系统具有以下特点：1．使用安全性高：外部可触及部件不带电，对入侵者没有人体伤害；2．有形的实体防护，具有有效的阻挡作用和一定的防抛物作用；3．钢丝绳的静态拉力可以在规定范围内随意设定，安装方便；4．误报率低：探测灵敏度可根据需要设定，有效地防止飞鸟，小动物，树叶，小树枝等干扰引起误报；5．环境适应性强：可适应各种复杂地形环境，不留防范死角；6．性能稳定可靠：能够自动跟踪钢丝绳的张力随环境温度的变化，确保张定可靠；7．钢丝绳攀爬报警：当钢丝绳的张力达到规定值后即发出攀爬报警信号8．钢丝绳松弛报警：当钢丝绳松弛达到规定值后即发出松弛报警信号；9．钢丝绳剪断报警：当钢丝绳被剪断时即发出剪断报警信号；10．防拆报警功能：拆开控制杆上盖时即发出防拆报警信号；11．电源断电报警功能：主电源断电时能发出断电报警信号；12．与环境的协调性：造型款式美观大方，安装效果好，与周围环境、景观和绿化协调一致，溶为一体，不扰民，不给用户造成厌恶感。
电子围栏方案和报价
脉冲电子围栏周界报警系统XX别墅设计方案####XX年XX月目录第一部分电子围栏报警系统介绍 (2)2.1 电子围栏概述 (2)2.2 G3智能型周界安防阻挡报警系统设计原则 (3)2.3 设计依据 (6)2.4 产品质量保证和服务 (6)第二部分电子围栏系统设计依据 (7)第三部分电子围栏系统设计方案 (8)3.1 概述 (8)3.3 系统设计说明 (10)3.3.1设计说明 (10)3.4 系统功能 (10)3.5 电子围栏系统结构示意图 (11)3.7 G3电子围栏系统组成： (11)3.7. 1 主机 (11)3.7.2 前端围栏 (13)3.7.3 终端拉线杆 (13)3.7.4 承力杆 (13)3.7.5 PV过线杆 (14)3.7.6 绝缘子 (14)3.7.7导线 (15)3.7.8 警示牌 (16)3.7.9 报警主机 (16)第四部分电子围栏系统配置清单 (19)第五部分电子围栏使用与维护 (21)5.1 检查 (21)5.2 通电 (21)5.3 注意事项 (21)第六部分售后服务承诺 (22)6.1 服务响应 (22)6.2 保修期限 (22)6.4 技术指导 (22)6.5 异常情况处理 (23)6.6 系统文档的建立与保存 (23)第七部分附件................................................ 错误!未定义书签。
部分工程案例............................................. 错误!未定义书签。
第一部分电子围栏报警系统介绍2.1 电子围栏概述当今世界安全防范技术现代化发展的方向是将视频监控、周界报警、门禁系统、入侵探测、出入口控制、巡更系统等，与电脑数码控制系统集成在一起，形成一个现代化、多功能、全天候的动态综合安全管理系统。
周界安防作为安防系统的第一道防线，作用十分重要，已从单体的报警再确认，发展成威慑阻挡加报警。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
图5-2 万向底座
5.3.4 承力杆与万向底座的安装 承力杆通过承力杆固定件使用螺丝、螺母固定在万向底座上面，万向底 座分为16个孔可根据孔位调整安装角度。（为了方便安装、在安装万向 底座之前应先安装承力杆绝缘子）。看图5-3
图5-3 万向底座
理。上海广拓信息技术有限公司国家标准的唯一主起草企业，国标号GB/T 7946-2008。
接地
接地
6
5.3.3 中间杆与万向底座的安装 中间杆通过中间杆固定件使用螺丝、螺母固定在万向底座上面，万向底 座分为16个孔可根据孔位调整安装角度。（为了方便安装，在安装万向 底座之前应先安装中间杆绝缘子）。看图5-2