MSDS PS5000_材料安全数据表

MATERIAL SAFETY DATA SHEET

[1] CHEMICAL PRODUCT / COMPANY IDENTIFICATION

- Product name: PS5000 SERIES / SCREEN PRINTING INK

- Manufacturer: HANASP CO., LTD.

- Address: UNIT 317, ILSAN UNITECHVILL 1141-2 BAEKSEOK-DONG, INSANDONG-GU GYEONGGI-DO, KOREA

- Phone: +82-31-909-7002 Fax: +82-31-909-7003

[2] COMPOSITION / INFORMATION ON INGREDIENTS

- Substance: Mixture

- Product: Screen Printing Ink

- Components Cas No. Weight

Vinyl chloride resin 25086-48-020- 35

Cyclohexanone 108-94-1 15- 25

Isophorone 78-59-1 15- 25

Solvent naphtha 64742-94-5 5- 10

Glutaric acid dimethyl ester 1119-40-0 5- 10

[3] HAZARDS IDENTIFICATION

- Toxicity information: May have a risk of organic solvent poisoning.

- Physical and chemical hazard: Inflammable Liquid. Remaining gas may cause explosion in contact with air. Flowing or stirring the product may produce a static electricity and it is in danger of ignition and blowup.

- Class name of hazardous chemical –based on Korea regulation: Inflammable Liquid, Acture toxic substance.

Inhalation: causes irritation to respiratory tract. High concentrations can cause central nervous system damage. Death may occur from respiratory failure.

Ingestion may cause nausea, vomiting and diarrhea.

Skin contact: skin contact causes irritation, redness

Eye contact: may cause irritation, redness and blurred vision. Splashes may cause severe irritation or eye damage.

[4] FIRST AND MEASURES

- Inhalation: Wrap the victim in a blanket, keep in quite and move to fresh air. If breathing is weak, irregular or stopped, administer artificial respiration and arrange the medical treatment by a physician as soon as possible

- Skin contact: Remove all contaminated clothes and shoes immediately. Wash the affected area with plenty of water. Arrange the medical treatment by a physician on injured skin or painful parts.

- Eye contact: Wash off with plenty of water for at least 15 minutes. Arrange the medical treatment. - Ingestion: Do not induce vomiting. Arrange medical inspection immediately.

[5] FIRE FIGHTING MEASURES

- Extinguish media: Powder, Form, Carbon dioxide, dry sand, enforced liquid spray.

- Extinguish media not to be used: Water

- Special fire fighting procedures: Remove the container to a safe place immediately. If difficult to remove, cool down the container and surrounding area with watering. Use the specific extinguish media. Fire fighter should wear proper protective equipment. Keep away from upwind of fire.

[6] ACCIDENTAL RELEASE MEASURES

- Safeguards (Personal): Evacuate personnel near fire. Seal off the area. Shut off all sources of ignition immediately. Fire fighter should wear proper protective equipment. Keep away from upwind of fire. Ventilate the area until all work is completed.

- Environmental precautions: Prevent wastewater form entering watercourses.

- Methods of cleaning up: Soak up the leakage with dry sand and package all materials in a closed container. Flush the area with plenty of water using mild detergent.

[7] HANDLING AND STORAGE

Handling:

- Technical measures: implement and equipment should me grounded properly for static protection. Wear conductive work clothes and shoes. Use explosion proof type of electrical equipment and non-sparkling tools.

- Handling precaution: Keep away from fire, spark and heat. Use in the well-ventilated area. Wear proper protective equipment to avoid inhalation and protect eyes and skin. Keep container tightly closed. Minimize vapor exhalation in the air and keep control concentration below standard. Storage:

Put in a closed container after use. Store in a cool, dry and well-ventilated area. Keep away from source of heat such as boiler. Keep away from flammable substances. Separate from oxidizing agent and organic peroxide. Store in a dangerous object warehouse according to fire defense low.

[8] EXPOSURE CONTROL / PERSONAL PROTECTION

- Engineering controls: Use only with adequate ventilation in closed system.

Personal protective equipment: Use gas mask, protective glasses, oil resistance gloves, protective clothes and protective boots.

- Sanitary measures: Change the mask regularly or on as case-by-case basis.

[9] PHYSICAL AND CHEMICAL PROTECTION

Physical form:

[ ]Liquid [ ]Vapor [ ]Solid [ ]Powder [X]Paste

Color: Each color Odor: solvent odor

pH: N/A Boiling point: 154C Flash point: 58C

Vapor pressure: --Pa(--C) Density: 1.00-1.60 Soluble in water: Hard Explosion limit(%): Lower: 1.0vol% Upper: 9.5vol%

[10] STABILITY AND REACTIVITY

- Incompatible materials: Dangerous substances and high-pressure gas hazardous decomposition products: Carbon Oxide (CO).

- Stability: Stable at room temperature or below.

Condition to avoid: Heat