思科第一学期期末考试最新考题CCNA

合集下载

思科认证CCNA认证试题与答案中文版

(A) 224. 0. 0.5 (B) 127. 32. 5. 62 (0202. 112.5.0 (D) 162. 111. 111. Ill
答案：D 注释:这个题目不是太严谨,应该加上子网掩码. A:224. 0. 0. 5 是多播地址 B: 127. 0.0. 0 保留作为测试使用 C:网络地址 26、设置主接口由 up 转 down 后延迟 30 秒切换到备份接口，主接口由 down 转 up 后 60 秒钟切换回主接口的配置为()
忍一句，息一怒，饶一着，退一步。——《增广贤文》
人之为学，不日进则日退，独学无友，则孤陋而难成；久处一方，则习染而不自觉。——《顾炎武》
答案：D 注释:255. 255. 255. 255 是全网广播,DHCP 客户端发送全网广播来查找 DHCP 服务器. 24、下而有关 NAT 叙述正确的是() (A) NAT 是英文“地址转换”的缩写，又称地址翻译 (B) XAT 用来实现私有地址与公用网络地址之间的转换 (C) 当内部网络的主机访问外部网络的时候，一定不需要 NAT (D) 地址转换的提出为解决 IP 地址紧张的问题提供了一个有效途径答案:ABD 25、以下属于正确的主机的 IP 地址的是()
(A) arp-a (B) traceroute (C) routeprint (D) displayiprouting-table
答案：D 23、 D0. 0. 0 (B) 10. 0. 0. 1 (0127. 0. 0. 1 (D)255. 255. 255. 255
192. 168. 1. 1
答案：D 注释:PC 的'默认网关要指向路由器的以太网口的 IP 地址. 28、 ISDNB 信道速率是()
(A) 16kbps (B) 64kbps

（最新）思科网络第一学期1-5章中文测试题及答案

ENetwork Chapter 2 - CCNA Exploration: 网络基础知识(版本 4.0) 1在封装过程中，数据链路层执行什么操作？不添加地址。

添加逻辑地址。

添加物理地址。

添加进程的端口号。

2TCP/IP 网络接入层有何作用？路径确定和数据包交换数据表、编码和控制可靠性、流量控制和错误检测详细规定构成物理链路的组件及其接入方法将数据段划分为数据包3数据链路层封装添加的报尾信息有何主要功能？支持差错校验确保数据按照顺序到达确保送达正确目的标识本地网络中的设备帮助中间设备进行处理和路径选择4请参见图。

下列哪组设备仅包含终端设备？A、C、DB、E、G、HC、D、G、H、I、JD、E、F、H、I、JE、F、H、I J5OSI 模型各层从最高层到最低层的正确顺序如何？物理层、网络层、应用层、数据链路层、表示层、会话层、传输层应用层、物理层、会话层、传输层网络层、数据链路层、表示层应用层、表示层、物理层、会话层、数据链路层、传输层、网络层应用层、表示层、会话层、传输层、网络层、数据链路层、物理层表示层、数据链路层、会话层、传输层、网络层、物理层、应用层6下列哪三项陈述是对局域网(LAN) 最准确的描述？（选择三项）LAN 通常位于一个地域内。

此类网络由由一个组织管理。

LAN 中的不同网段之间一般通过租用连接的方式连接。

此类网络的安全和访问控制由服务提供商控制。

LAN 为同一个组织内的用户提供网络服务和应用程序访问。

此类网络的每个终端通常都连接到电信服务提供商(TSP)。

7第4 层端口指定的主要作用是什么？标识本地介质中的设备标识源设备和目的设备之间的跳数向中间设备标识过该网络的最佳路径标识正在通信的源终端设备和目的终端设备标识终端设备内正在通信的进程或服务8以下哪种特征正确代表了网络中的终端设备？管理数据流发送数据流重新定时和重新传输数据信号确定数据传输路径9请参见图示。

哪个术语正确判断出了包含于绿色区域中的设备类型？源终端传输中间10OSI 模型哪两层的功能与TCP/IP 模型的网络接入层相同？（选择两项）网络层传输层物理层数据链路层会话层11请参见图示。

思科考试CCNA

CCNA(1)适用班级：CCNA注意事项：1.在试卷的标封处填写姓名和班级2.考试时间共120分钟3.答案写在答题卡上1. What is the maximum number of IP addresses that can be assigned to hosts on a local subnetthat uses the subnet maskA. 14B. 15C. 16D. 30E. 31F. 622. You have a network that needs 29 subnets while maximizing the number of host addressesavailable on each subnet. How many bits must you borrow from the host field to provide thecorrect subnet maskA. 2B. 3C. 4D. 5E. 6F. 73. What is the subnetwork address for a host with the IP address The network address of provides how many subnets and hostsA. 7 subnets, 30 hosts eachB. 7 subnets, 2,046 hosts eachC. 7 subnets, 8,190 hosts eachD. 8 subnets, 30 hosts eachE. 8 subnets, 2,046 hosts eachF. 8 subnets, 8,190 hosts each5. Which two statements describe the IP address 10.16.3.65/23 (Choose two.)A. The subnet address is 10.16.3.0 The lowest host address in the subnet is 10.16.2.1 The last valid host address in the subnet is 10.16.2.254 The broadcast address of the subnet is 10.16.3.255 The network is not subnetted.6. If a host on a network has the address what is the subnetwork this hostbelongs toA. On a VLSM network, which mask should you use on point-to-point WAN links in order toreduce the waste of IP addressesA. /27B. /28C. /29D. /30E. /318. What is the subnetwork number of a host with an IP address of You have an interface on a router with the IP address of Including the routerinterface, how many hosts can have IP addresses on the LAN attached to the router interfaceA. 6B. 8C. 30D. 62E. 12610. You need to configure a server that is on the subnet The router has the firstavailable host address. Which of the following should you assign to the serverA. You have an interface on a router with the IP address of What is thebroadcast address the hosts will use on this LANA. You need to subnet a network that has 5 subnets, each with at least 16 hosts. Which classfulsubnet mask would you useA. A network administrator is connecting hosts A and B directly through their Ethernet interfaces,as shown in the illustration. Ping attempts between the hosts are unsuccessful. What can bedone to provide connectivity between the hosts (Choose two.)A. A crossover cable should be used in place of the straight-through cable.B. A rollover cable should be used in place of the straight-through cable.C. The subnet masks should be set to A default gateway needs to be set on each host.E. The subnet masks should be set to Address: Address: Cable164 Chapter 3 Subnetting, VLSMs, and Troubleshooting TCP/IP14. If an Ethernet port on a router were assigned an IP address of what wouldbe the valid subnet address of this hostA. Using the following illustration, what would be the IP address of E0 if you were using theeighth subnet The network ID is and you need to use the last available IPaddress in the range. The zero subnet should not be considered valid for this question.A. Using the illustration from the previous question, what would be the IP address of S0 if you wereusing the first subnet The network ID is and you need to use the last availableIP address in the range. Again, the zero subnet should not be considered valid for this question.A. Which configuration command must be in effect to allow the use of 8 subnets if the Class C subnet mask is Router(config)#ip classlessB. Router(config)#ip version 6C. Router(config)#no ip classfulD. Router(config)#ip unnumberedE. Router(config)#ip subnet-zeroF. Router(config)#ip all-nets18. You have a network with a subnet of Which is the valid host addressA. Your router has the following IP address on Ethernet0: Which of the following can be valid host IDs on the LAN interface attached to the router (Choose two.)A. To test the IP stack on your local host, which IP address would you pingA. 1.0.0.127C. You type show running-config and get this output:[output cut]Line console 0Exec-timeout 1 44Password 7098C0BQRLogin[output cut]What do the two numbers following the exec-timeout command meanA. If no command has been typed in 44 seconds, the console connection will be closed.B. If no router activity has been detected in 1 hour and 44 minutes, the console will be locked out.C. If no commands have been typed in 1 minute and 44 seconds, the console connection willbe closed.D. If you’re connected to the router by a Telnet connection, input must be detected within 1 minute and 44 seconds or the connection will be closed.22. You need to find the broadcast address used on a LAN on your router. What command willyou type into the router from user mode to find the broadcast addressA. show running-configB. show startup-configC. show interfacesD. show protocols23. You want to totally reinitialize the router and replace the current running-config with the current startup-config. What command will you useA. replace run startB. copy run startC. copy start runD. reloadReview Questions 24324. Which command will show you whether a DTE or a DCE cable is plugged into serial 0A. sh int s0B. sh int serial 0C. show controllers s 0D. show serial 0 controllers25. What keystroke will terminate setup modeA. Ctrl+ZB. Ctrl+^C. Ctrl+CD. Ctrl+Shift+^26. You set the console password, but when you display the configuration, the password doesn’t show up; it looks like this:[output cut]Line console 0Exec-timeout 1 44Password 7098C0BQRLogin[output cut]What cause the password to be stored like thisA. encrypt passwordB. service password-encryptionC. service-password-encryptionD. exec-timeout 1 4427. Which of the following commands will configure all the default VTY ports on a routerA. Router#line vty 0 4B. Router(config)#line vty 0 4C. Router(config-if)#line console 0D. Router(config)#line vty all28. Which of the following commands sets the secret password to CiscoA. enable secret password CiscoB. enable secret ciscoC. enable secret CiscoD. enable password Cisco244 Chapter 4 Cisco’s IOS and Security Device Manager29. If you wanted administrators to see a message when logging into the router, which command would you useA. message banner motdB. banner message motdC. banner motdD. message motd30. How many simultaneous Telnet sessions does a Cisco router support by defaultA. 1B. 2C. 3D. 4E. 5F. 631. What command do you type to save the configuration stored in RAM to NVRAMA. Router(config)#copy current to startingB. Router#copy starting to runningC. Router(config)#copy running-config startup-configD. Router#copy run startup32. You try to telnet into SFRouter from router Corp and receive this message:Corp#telnet SFRouterTrying SFRouter (10.0.0.1)…OpenPassword required, but none set[Connection to SFRouter closed by foreign host]Corp#Which of the following sequences will address this problem correctlyA. Corp(config)#line console 0B. SFRemote(config)#line console 0C. Corp(config)#line vty 0 4D. SFRemote(config)#line vty 0 433. Which command will delete the contents of NVRAM on a routerA. delete NVRAMB. delete startup-configC. erase NVRAMD. erase startReview Questions 24534. What is the problem with an interface if you type show interface serial 0 and receive the following messageSerial0 is administratively down, line protocol is downA. The keepalives are different times.B. The administrator has the interface shut down.C. The administrator is pinging from the interface.D. No cable is attached.35. Which of the following commands displays the configurable parameters and statistics of all interfaces on a routerA. show running-configB. show startup-configC. show interfacesD. show versions36. If you delete the contents of NVRAM and reboot the router, what mode will you be inA. Privileged modeB. Global modeC. Setup modeD. NVRAM loaded mode37. You type the following command into the router and receive the following output: Router#show serial 0/0^% Invalid input detected at ‘^’marker.Why was this error message displayedA. You need to be in privileged mode.B. You cannot have a space between serial and 0/0.C. The router does not have a serial0/0 interface.D. Part of the command is missing.38. You type Router#sh ru and receive an % ambiguous command error. Why did you receivethis messageA. The command requires additional options or parameters.B. There is more than one show command that starts with the letters ru.C. There is no show command that starts with ru.D. The command is being executed from the wrong router mode.246 Chapter 4 Cisco’s IOS and Security Device Manager39. Which of the following commands will display the current IP addressing and the layer 1 and2 status of an interface (Choose three.)A. show versionB. show protocolsC. show interfacesD. show controllersE. show ip interfaceF. show running-config40. What layer of the OSI model would you assume the problem is in if you type show interface serial 1 and receive the following messageSerial1 is down, line protocol is downA. Physical layerB. Data Link layerC. Network layerD. None; it is a router problem.41. What does the command o/r 0x2142 provideA. It is used to restart the router.B. It is used to bypass the configuration in NVRAM.C. It is used to enter ROM Monitor mode.D. It is used to view the lost password.42. Which command will copy the IOS to a backup host on your networkA. transfer IOS to copy run startC. copy tftp flashD. copy start tftpE. copy flash tftp43. You are troubleshooting a connectivity problem in your corporate network and want to isolate the problem. You suspect that a router on the route to an unreachable network is at fault.What IOS user exec command should you issueA. Router>pingB. Router>traceC. Router>show ip routeD. Router>show interfaceE. Router>show cdp neighbors44. You copy a configuration from a network host to a router’s RAM. The configuration looks correct, yet it is not working at all. What could the problem beA. You copied the wrong configuration into RAM.B. You copied the configuration into flash memory instead.C. The copy did not override the shutdown command in running-config.D. The IOS became corrupted after the copy command was initiated.45. A network administrator wants to upgrade the IOS of a router without removing the image currently installed. What command will display the amount of memory consumed by the currentIOS image and indicate whether there is enough room available to hold both the currentand new imagesA. show versionB. show flashC. show memoryD. show buffersE. show running-config46. The corporate office sends you a new router to connect, but upon connecting the console cable,you see that there is already a configuration on the router. What should be done before a new configuration is entered in the routerA. RAM should be erased and the router restarted.B. Flash should be erased and the router restarted.C. NVRAM should be erased and the router restarted.D. The new configuration should be entered and saved.47. Which command loads a new version of the Cisco IOS into a routerA. copy flash ftpB. copy ftp flashC. copy flash tftpD. copy tftp flash48. Which command will show you the IOS version running on your routerA. sh IOSB. sh flashC. sh versionD. sh running-config49. What should the configuration register value be after you successfully complete the password recovery procedure and return the router to normal operationA. 0x2100B. 0x2101C. 0x2102D. 0x214250. You save the configuration on a router with the copy running-config startup-configcommand and reboot the router. The router, however, comes up with a blank configuration.What can the problem beA. You didn’t boot the router with the correct command.B. NVRAM is corrupted.C. The configuration register setting is incorrect.D. The newly upgraded IOS is not compatible with the hardware of the router.E. The configuration you save is not compatible with the hardware.51. If you want to have more than one Telnet session open at the same time, what keystroke combination would you useA. Tab+spacebarB. Ctrl+X, then 6C. Ctrl+Shift+X, then 6D. Ctrl+Shift+6, then X52. You are unsuccessful in telnetting into a remote device. What could the problem be (Choose two.)A. IP addresses are incorrect.B. Access control list is filtering Telnet.C. There is a defective serial cable.D. The VTY password is missing.53. What information is displayed by the show hosts command (Choose two.)A. Temporary DNS entriesB. The names of the routers created using the hostname commandC. The IP addresses of workstations allowed to access the routerD. Permanent name-to-address mappings created using the ip host commandE. The length of time a host has been connected to the router via Telnet54. Which three commands can be used to check LAN connectivity problems on a router(Choose three.)A. show interfacesB. show ip routeC. tracertD. pingE. dns lookups55. You telnet to a router and make your necessary changes; now you want to end the Telnet session. What command do you type inA. closeB. disableC. disconnectD. exit56. You telnet into a remote device and type debug ip rip, but no output from the debug command is seen. What could the problem beA. You must type the show ip rip command first.B. IP addressing on the network is incorrect.C. You must use the terminal monitor command.D. Debug output is sent only to the console.57. Which command displays the configuration register settingA. show ip routeB. show boot versionC. show versionD. show flash58. You need to gather the IP address of a remote switch that is located in Hawaii. What can youdo to find the addressA. Fly to Hawaii, console into the switch, then relax and have a drink with an umbrella in it.B. Issue the show ip route command on the router connected to the switch.C. Issue the show cdp neighbor command on the router connected to the switch.D. Issue the show ip arp command on the router connected to the switch.E. Issue the show cdp neighbors detail command on the router connected to the switch.59. You have your laptop directly connected into a router’s Ethernet port. Which of the following are among the requirements for the copy flash tftp command to be successful (Choose three.)A. TFTP server software must be running on the router.B. TFTP server software must be running on your laptop.C. The Ethernet cable connecting the laptop directly into the router’s Ethernet port mu st bea straight-through cable.D. The laptop must be on the same subnet as the router’s Ethernet interface.E. The copy flash tftp command must be supplied the IP address of the laptop.F. There must be enough room in the flash memory of the router to accommodate the file tobe copied.60. The configuration register setting of 0x2102 provides what function to a routerA. Tells the router to boot into ROM monitor modeB. Provides password recoveryC. Tells the router to look in NVRAM for the boot sequenceD. Boots the IOS from a TFTP serverE. Boots an IOS image stored in ROM61. A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication sessionA. Send a different source port number.B. Restart the virtual circuit.C. Decrease the sequence number.D. Decrease the window size.62. Which fields are contained within an IEEE Ethernet frame header (Choose two.)A. Source and destination MAC addressB. Source and destination network addressC. Source and destination MAC address and source and destination network addressD. FCS field63. Which layer 1 devices can be used to enlarge the area covered by a single LAN segment (Choose two.)A. SwitchB. NICC. HubD. RepeaterE. RJ45 transceiver64. Segmentation of a data stream happens at which layer of the OSI modelA. PhysicalB. Data LinkC. NetworkD. Transport65. Which of the following describe router functions (Choose four.)A. Packet switchingB. Collision preventionC. Packet filteringD. Broadcast domain enlargementE. Internetwork communicationF. Broadcast forwardingG. Path selection66. Routers operate at layer __. LAN switches operate at layer __. Ethernet hubs operate at layer __. Word processing operates at layer __.A. 3, 3, 1, 7B. 3, 2, 1, noneC. 3, 2, 1, 7D. 2, 3, 1, 7E. 3, 3, 2, none67. When data is encapsulated, which is the correct orderA. Data, frame, packet, segment, bitB. Segment, data, packet, frame, bitC. Data, segment, packet, frame, bitD. Data, segment, frame, packet, bit68. Why does the data communication industry use the layered OSI reference model (Choose two.)A. It divides the network communication process into smaller and simpler components, thus aiding component development, design, and troubleshooting.B. It enables equipment from different vendors to use the same electronic components, thus saving research and development funds.C. It supports the evolution of multiple competing standards and thus provides business opportunities for equipment manufacturers.D. It encourages industry standardization by defining what functions occur at each layer ofthe model.E. It provides a framework by which changes in functionality in one layer require changes inother layers.69. What are two purposes for segmentation with a bridgeA. To add more broadcast domainsB. To create more collision domainsC. To add more bandwidth for usersD. To allow more broadcasts for users70. Which of the following are unique characteristics of half-duplex Ethernet when compared tofull-duplex Ethernet (Choose two.)A. Half-duplex Ethernet operates in a shared collision domain.B. Half-duplex Ethernet operates in a private collision domain.C. Half-duplex Ethernet has higher effective throughput.D. Half-duplex Ethernet has lower effective throughput.E. Half-duplex Ethernet operates in a private broadcast domain.58 Chapter 1 Internetworking71. You want to implement a network medium that is not susceptible to EMI. Which type of cabling should you useA. Thicknet coaxB. Thinnet coaxC. Category 5 UTP cableD. Fiber-optic cable72. Acknowledgments, sequencing, and flow control are characteristics of which OSI layerA. Layer 2B. Layer 3C. Layer 4D. Layer 773. Which of the following are types of flow control (Choose all that apply.)A. BufferingB. Cut-throughC. WindowingD. Congestion avoidanceE. VLANs74. Which of the following types of connections can use full duplex (Choose three.)A. Hub to hubB. Switch to switchC. Host to hostD. Switch to hubE. Switch to host75. What is the purpose of flow controlA. To ensure that data is retransmitted if an acknowledgment is not receivedB. To reassemble segments in the correct order at the destination deviceC. To provide a means for the receiver to govern the amount of data sent by the senderD. To regulate the size of each segment76. Which three statements are true about the operation of a full-duplex Ethernet networkA. There are no collisions in full-duplex mode.B. A dedicated switch port is required for each full-duplex node.C. Ethernet hub ports are preconfigured for full-duplex mode.D. In a full-duplex environment, the host network card must check for the availability of the network media before transmitting.E. The host network card and the switch port must be capable of operating in full-duplex mode. Review Questions 5977. What type of RJ45 UTP cable is used between switchesA. Straight-throughB. Crossover cableC. Crossover with a CSU/DSUD. Crossover with a router in between the two switches78. How does a host on an Ethernet LAN know when to transmit after a collision has occurred (Choose two.)A. In a CSMA/CD collision domain, multiple stations can successfully transmit data simultaneously.B. In a CSMA/CD collision domain, stations must wait until the media is not in use before transmitting.C. You can improve the CSMA/CD network by adding more hubs.D. After a collision, the station that detected the collision has first priority to resend thelost data.E. After a collision, all stations run a random backoff algorithm. When the backoff delay period has expired, all stations have equal priority to transmit data.F. After a collision, all stations involved run an identical backoff algorithm and then synchronize with each other prior to transmitting data.79. What type of RJ45 UTP cable do you use to connect a PC’s COM port to a router or switch console portA. Straight-throughB. Crossover cableC. Crossover with a CSU/DSUD. Rolled80. You have the following binary number:What are the decimal and hexadecimal equivalentsA. 69/0x2102B. 183/B7C. 173/A6D. 83/0xC581. What are the decimal and hexadecimal equivalents of the binary number(Choose two.)A. 159B. 157C. 185D. 0x9DE. 0xD9F. 0x15982. Which of the following allows a router to respond to an ARP request that is intended for a remote hostA. Gateway DPB. Reverse ARP (RARP)C. Proxy ARPD. Inverse ARP (IARP)E. Address Resolution Protocol (ARP)83. You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you useto accomplish thisA. SMTPB. SNMPC. DHCPD. ARP84. What protocol is used to find the hardware address of a local deviceA. RARPB. ARPC. IPD. ICMPE. BootP85. Which of the following are layers in the TCP/IP model (Choose three.)A. ApplicationB. SessionC. TransportD. InternetE. Data LinkF. Physical86. Which class of IP address provides a maximum of only 254 host addresses per network IDA. Class AB. Class BC. Class CD. Class DE. Class E87. Which of the following describe the DHCP Discover message (Choose two.)A. It uses FF:FF:FF:FF:FF:FF as a layer 2 broadcast.B. It uses UDP as the Transport layer protocol.C. It uses TCP as the Transport layer protocol.D. It does not use a layer 2 destination address.8. Which layer 4 protocol is used for a Telnet connectionA. IPB. TCPC. TCP/IPD. UDPE. ICMP89. Which statements are true regarding ICMP packets (Choose two.)A. They acknowledge receipt of a TCP segment.B. They guarantee datagram delivery.C. They can provide hosts with information about network problems.D. They are encapsulated within IP datagrams.E. They are encapsulated within UDP datagrams.90. Which of the following services use TCP (Choose three.)A. DHCPB. SMTPC. SNMPD. FTPE. HTTPF. TFTP91. Which of the following services use UDP (Choose three.)A. DHCPB. SMTPC. SNMPD. FTPE. HTTPF. TFTP92. Which of the following are TCP/IP protocols used at the Application layer of the OSI model (Choose three.)A. IPB. TCPC. TelnetD. FTPE. TFTP93. The following illustration shows a data structure header. What protocol is this header fromA. IPB. ICMPC. TCPD. UDPE. ARPF. RARP94. If you use either Telnet or FTP, which is the highest layer you are using to transmit dataA. ApplicationB. PresentationC. SessionD. Transport95. The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI modelA. ApplicationB. Host-to-HostC. InternetD. Network Access96. Which two of the following are private IP addressesA. 12.0.0.1B. What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model A. ApplicationB. Host-to-HostC. InternetD. Network Access98. Which statements are true regarding ICMP packets (Choose two)A. ICMP guarantees datagram delivery.B. ICMP can provide hosts with information about network problems.C. ICMP is encapsulated within IP datagrams.D. ICMP is encapsulated within UDP datagrams.99. What is the address range of a Class B network address in binaryA. 01xxxxxxB. 0xxxxxxxC. 10xxxxxxD. 110xxxxx100. Which of the following protocols uses both TCP and UDPA. FTPB. SMTPC. TelnetD. DNS答题卡。

思科第一学期期末考试最新答案CCNA1

要将数据包发送到远程网络，应使用哪种设备？访问交换机DHCP 服务器集线器路由器OSI 哪一层使用面向连接的协议来确保数据的可靠传输？应用层表示层会话层传输层请参见图示。

根据显示的IP 配置回答，主机 A 和主机 B 无法在本地网络外通信的原因是什么？对主机 A 分配了网络地址。

对主机 B 分配了组播地址。

主机 A 和主机 B 属于不同的网络。

对网关地址分配了广播地址。

请参见图示。

包含路由器 B 的网络遇到问题。

助理网络工程师已确定此网络的问题出在路由行什么操作可以纠正该网络问题？在接口Serial 0/0/0 上发出clock rate命令在接口Serial 0/0/1 上发出description命令在接口FastEthernet 0/0 上发出ip address命令在接口FastEthernet 0/1 上发出no shutdown命令请参见图示。

对于从主机 A 向Web 服务器发出的网页请求，正确的目的套接字数字是什么00-08-a3-b6-ce-46198.133.219.25:80C 172.18.0.0/24 is directly connected, FastEthernet0/0在Cisco IOS 设备中，启动配置文件存储于何处？闪存NVRAMRAMROM在配置路由器时，网络技术人员想要命名路由器。

输入hostname命令后，技术人员会看到下列示？Router>Router#Router(config)#Router(config-line)#下列哪三个IPv4 地址代表子网的广播？（选择三项）172.16.4.63 /26172.16.4.129 /26172.16.4.191 /26172.16.4.51 /27172.16.4.95 /27172.16.4.221 /27网络管理员想要限制访问路由器的特权执行模式。

管理员应该使用哪一种口令？使能aux控制台VTY请参见图示。

ccna1章节及期末试题答案

第一章：正确答案：2.4.5解析：由于不需要使用网络设备和专用服务器，对等网络易于创建，复杂性更低，且成本更少。

而且对等网络也没有集中管理。

这种网络安全性更低，不可扩展，而且那些同时充当客户端和服务器的设备可能性能更差正确答案：1解析：正确答案： 3.5解析：选择网络介质的条件包括：所选介质可以成功传送信号的距离、要安装所选介质的环境、必须传输的数据量和速度以及介质和安装的成本。

正确答案：3和4解析：终端设备上的应用程序可以生成数据，更改数据内容并且负责启动封装过程。

正确答案：1和4解析：终端设备会发出通过网络传输的数据。

中间设备会在链路发生故障时通过备用路径传输数据，并且会过滤数据传输以增强安全性。

网络介质提供网络消息的传输通道。

正确答案：4解析：外联网是公司外部的人或企业合作伙伴访问数据的网络区域。

内部网只描述通常仅供内部人员访问的网络区域。

当设备连接到有线网络时，有线LAN 会受BYOD（自带设备）影响。

使用大学无线LAN 的设备多为平板电脑和智能手机。

大学生主要使用无线WAN 来访问他们的手机运营商网络。

.正确答案：2解析：由于通过Internet 可以联系在线供应商，所以家庭用户通过Internet 进行网上购物。

内联网基本上是仅供内部使用的局域网。

外联网是外部合作伙伴访问组织内部特定资源的网络。

家庭用户并不一定使用LAN 来访问Internet。

例如，PC 可以通过调制解调器直接连接到ISP。

正确答案：1解析：内部网这个术语用于表示一个组织的私有局域网和广域网连接。

内部网的设计旨在仅允许该组织的成员、员工或其他获得授权的人员进行访问。

正确答案：2和4解析：电缆和DSL 均能实现高带宽、始终联网，并提供到主机计算机或LAN 的以太网连接。

10正确答案：2和3解析：移动电话连接需要使用移动电话网络。

卫星连接通常用于家庭或企业外部不便使用物理布线的位置。

11正确答案：2解析：当对网络资源的请求超出了可用容量时，网络就会变得拥堵。

CCNA E am CCNA第一学期期末考试

CCNA1ENetworkFinalExam -CCNAExploration: 网络基础知识(版本 4.0)下列有关网络层编址的陈述中哪三项是正确的?（选择三项。

）网络层编址使用分层式结构。

使用长度为48 位的地址。

以太网交换机可以使用它来作出转发决定。

它不支持广播。

其使用的编址方法可以识别地址的网络部分。

网络层编址可以区分每台主机。

请参见图示。

在PC 上发出所示的命令。

IP 地址代表什么？主机的IP 地址主机的默认网关主机的主页IP 地址主机的首选域名服务器网站的IP 地址。

哪三个地址属于公有IP 地址？（选择三项。

）数据链路层有哪两项功能？（选择两项）分割和记录数据。

在源主机和目的主机上运行的程序之间进行数据交换。

控制数据如何传递到介质中。

生成信号以表示每个帧中的比特。

使用帧头和帧尾封装每个数据包，以便在本地介质中进行传输。

请参见图示。

主机A 要访问Internet。

哪项第2 层地址和第3 层地址的组合可以让主机A 实现此访问？目的MAC：，默认网关：目的MAC：，默认网关：目的MAC：，默认网关：目的MAC：，默认网关：下列哪三项是CSMA/CD 的特征？（选择三项。

）设备会侦听介质，并且仅当无法检测到介质上存在其它信号时才会传输数据。

介质上的所有设备均可侦听所有通信。

设备根据配置的优先级来进行通信。

发生冲突后，引起冲突的设备会优先尝试传输数据。

发生冲突时，所有设备会在一段时间内停止传输数据，该段时间的长度随机决定。

CSMA/CD 使用令牌系统来避免冲突。

下列哪三个IPv4 地址代表子网的有效网络地址？（选择三项。

）请参见图示。

用记号来表示每条介质链路。

用来连接不同设备的正确电缆类型是什么？连接1 - 直通电缆，连接2 - 直通电缆，连接3 - 交叉电缆连接1 - 直通电缆，连接2 - 交叉电缆，连接3 - 全反电缆连接1 - 交叉电缆，连接2 - 全反电缆，连接3 - 直通电缆连接1 - 交叉电缆，连接2 - 直通电缆，连接3 - 交叉电缆连接1 - 直通电缆，连接2 - 全反电缆，连接3 - 交叉电缆请参见图示。

ccna考试题库最新版

ccna考试题库最新版CCNA（Cisco Certified Network Associate）认证是全球范围内最受欢迎的网络工程师认证之一，具备CCNA认证可以证明一个人在建立、规划、运行、安装和配置中等规模的局域网和广域网方面的专业知识。

为了帮助广大考生顺利通过CCNA考试，不断更新的CCNA考试题库至关重要。

以下是最新版本的CCNA考试题库，希望对考生们有所帮助。

第一部分：网络基础知识1. 什么是OSI七层模型？简要介绍每一层的功能。

2. TCP和UDP之间有哪些区别？请分别举例说明。

3. 什么是IP地址？IP地址的类型有哪些？请列举并简要介绍各自的特点。

4. 什么是子网掩码？为什么在网络中使用子网掩码？5. 简述常见的网络设备有哪些，以及各自的功能与作用。

第二部分：路由和交换技术1. 路由器和交换机之间有何区别？请进行比较并指出各自的优势和劣势。

2. 什么是VLAN？VLAN的作用及在网络中的应用场景是什么？3. OSPF和EIGRP是两种常见的路由协议，请比较它们的特点并举例说明。

4. 请解释静态路由和动态路由的概念以及在网络中的应用。

5. 交换机在网络中扮演什么角色？交换机的MAC地址表是如何工作的？第三部分：网络安全和管理1. 网络安全的重要性是什么？请列举几种常见的网络安全威胁并介绍应对策略。

2. 什么是ACL（访问控制列表）？ACL的作用是什么？请给出一个ACL的配置示例。

3. VPN是什么？VPN的工作原理及在企业网络中的应用。

4. SNMP是网络管理中常用的协议，它的作用是什么？请解释SNMP中的几个重要概念。

5. 如何保护无线网络的安全？请列举几种方法。

第四部分：WAN技术1. 什么是WAN？WAN的主要特点是什么？2. PPP协议和HDLC协议分别是什么？请比较它们的异同。

3. 什么是Frame Relay？Frame Relay的工作原理及在WAN中的应用。

4. 请解释T1和E1的概念，以及它们在传输速率和应用方面的差异。

思科第一学期期末考试最新考题CCNA1备课讲稿

思科第一学期期末考试最新考题C C N A11Refer to the exhibit. Which Layer 2 protocol could be used inside nework A and network C?IPTCPUDPEthernet2Refer to the exhibit. Which set of devices contains only intermediary devices?A, B, D, GA, B, E, FC, D, G, IG, H, I, J3Refer to the exhibit. The headers added at each layer are shown. Which layer adds the destination and source process num ensure that data is delivered to the correct application?physical layerdata link layernetwork layertransport layer4The Layer 4 header contains which type of information to aid in the delivery of data?service port numberhost logical addressdevice physical addressvirtual connection identifier5Which fiber connector supports full-duplex Ethernet?6Which device should be used for routing a packet to a remote network?access switchDHCP serverhubrouter7Refer to the exhibit. Host A sends a frame to host C with a destination MAC address CC. The MAC address for host C is no table of switch SW1. How will SW1 handle the frame?Switch SW1 will drop the frame.Switch SW1 will forward the frame to host C.Switch SW1 will flood the frame out all ports.Switch SW1 will flood the frame out all ports except port Fa0/1.8Refer to the exhibit. A network technician has made several changes to R1 since the configuration has last been saved. Th configuration did not produce the desired changes. The technician wants to store a backup copy of the saved configuration server before reloading. Which action will cause the unmodified data to be saved on the TFTP server?9Which three statements are true about network layer addressing? (Choose three.)It uniquely identifies each host.It assists in forwarding packets across internetworks.It uses a logical 32-bit IPv4 address.It is not a configurable address.It is a physical address.It identifies the host from the first part of the address.10What is the result of using the clock rate 56000 command at the serial interface of the router?The interface is configured as a DCE device.The interface timers are cleared.The FastEthernet interface is made to emulate a serial interface by assigning it a timing signal.The IP address for the serial interface is configured.11Examine the graphic with current configurations. Host A in the Clerical office failed and was replaced. Although a ping to 12 successful, the replacement computer cannot access the company network. With proxy ARP disabled on the Fa0/0 interfacnetwork card failurenetwork cables unpluggedIP address incorrectly enteredsubnet mask incorrectly entered12As network administrator, what is the subnet mask that allows 510 hosts given the IP address 172.30.0.0?255.255.0.0255.255.248.0255.255.252.0255.255.254.0255.255.255.0255.255.255.12813Which OSI layer uses a connection-oriented protocol to ensure reliable delivery of data?application layerpresentation layersession layertransport layer14 A network has grown too large for technicians to configure network addresses and hosts files for name resolution. Which twlayer services should be added to the server to allow these needs to be satisfied dynamically? (Choose two.)DNSFTPDHCPHTTPSMTP15Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address w access from host A?Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.13016 A network administrator is asked to design a new addressing scheme for a corporate network. There are 60 users in the musers in the branch office, 28 users in manufacturing, 12 in the sales office, and 4 users in the research office. Which VLSM scheme that uses the 192.168.88.0/24 network will fulfill the requirements while wasting the fewest addresses?192.168.88.0/26 main192.168.88.32/26 branch192.168.88.64/26 manufacturing192.168.88.96/27 sales192.168.88.128/28 research192.168.88.0/26 main192.168.88.64/26 branch192.168.88.128/27 manufacturing192.168.88.160/28 sales192.168.88.176/29 research192.168.88.0/27 main192.168.88.32/27 branch192.168.88.64/28 manufacturing192.168.88.80/29 sales192.168.88.88/30 research192.168.88.0/27 main192.168.88.64/28 branch192.168.88.80/28 manufacturing192.168.88.96/29 sales192.168.88.104/30 research17Which physical connector type is used for a serial V.35 connection to the CSU/DSU?18Refer to the exhibit. Which two facts can be determined about the topology? (Choose two.)Four collision domains are present.One logical network is represented.Two broadcast domains are present.Three networks are needed.Three logical address ranges are required.19What are three characteristics of CSMA/CD? (Choose three.)It monitors the media for presence of a data signal.After detecting a collision, hosts can resume transmission after a random timer has expired.A jam signal is used to ensure that all hosts are aware that a collision has occurred.Devices can be configured with a higher transmission priority.Data is transmitted only when the data signal is present.It uses a token system to avoid collisions.20Refer to the exhibit. The serial interface of the router was configured with the use of the commands that are shown. The rou ping the router that is directly connected to interface serial 0/0/0. What should the network technician do to solve this probleConfigure the description at interface serial 0/0/0.Configure an IP address on interface serial 0/0/0.Remove the no shutdown command at interface serial 0/0/0Reboot the router.21Which OSI layer uses the header information to reassemble the data segments into streams?application layernetwork layerpresentation layersession layertransport layer22Refer to the exhibit. The NAT functionality of the router is enabled to provide Internet access to the PC. However, the PC is to access the Internet. Which IP address should be changed to 209.165.201.1 to enable the PC to access the Internet?192.168.1.191192.168.1.101192.168.1.1192.168.1.25423the IP address of the primary domain name server used by the host?10.10.10.32192.168.1.5192.168.1.99192.168.2.10024Which memory contents will change as a result of using the Router# erase startup-config command on a router?RAMROMflashNVRAM25While configuring a router, a network technician wants to name the router. Which prompt should the technician see when e hostname command?Router>Router#Router(config)#Router(config-line)#26Refer to the exhibit. The PC, the routing table of which is displayed, is configured correctly. To which network device or inte the IP address 192.168.1.254 belong?PCswitchrouter interface fa0/0router interface fa0/127Refer to the exhibit. A network administrator is troubleshooting a link that is down between Router1 and Router2. To correc which wire pairs need to be switched on one of the Ethernet cable ends?pair 1 and pair 2pair 1 and pair 3pair 2 and pair 3pair 2 and pair 428Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate with its default gUse the ping 127.0.0.1 command.Use the ipconfig command.Use the ipconfig/all command.Use the ping 10.0.0.254 command.29Refer to the exhibit. Host B was powered off. What change will occur in the MAC table of the switch?The table will remain unaffected.The switch will remove the MAC address at Fa0/19.The switch will retain the MAC address until host B is powered on again.The switch will rebuild the MAC table by assigning the FFFF.FFFF.FFFF address to port Fa0/19.30What information is contained in the header of Layer 3 to help data delivery?port numberdevice physical addressdestination host logical addressvirtual connection identifier31 A network technician is tasked with setting up a network for six users, but the users should be able to use their accounts toany of the six computers. What type of network should be used?workgroupP2P applicationspeer-to-peer networkclient-server network32Refer to the exhibit. A web browser is running on host PC1 with an IP address 10.10.2.2/24. A dynamic port number of 491 assigned to the browser. The browser sends a request for a web page to the web server with an IP address 192.168.1.254 statement is true?The session is established using TCP, and the socket number for the web server is 192.168.1.254: 80.The session is established using TCP, and the socket number for the web server is 192.168.1.254: 49152.The session is established using UDP, and the socket number for the web server is 192.168.1.254: 80.The session is established using UDP, and the socket number for the web server is 192.168.1.254: 49152.33Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housed on the web server.application will allow this request to be started?34Refer to the exhibit. What is required on host A for a network technician to create the initial configuration on Router1?an FTP clienta Telnet clienta terminal emulation programa web browser35What are two characteristics of the data link layer? (Choose two.)It segments and reorders the data.It exchanges the frames between nodes.It defines the method by which network devices place data onto the media.It manages the transfer of data between the processes that run on each host.It retrieves signals from the media and restores them to their bit representations.36 A network administrator wants to restrict access to the router privileged EXEC mode. Which password should the administrenableauxconsoleVTY37Which three IPv4 addresses represent a broadcast for a subnet? (Choose three.)172.16.4.63 /26172.16.4.129 /26172.16.4.191 /26172.16.4.51 /27172.16.4.95 /27172.16.4.221 /2738Refer to the exhibit. Host X is unable to communicate with host Y. Which command can be run at host X to determine which intermediary device is responsible for this failure?telnet 192.168.1.1ping 192.168.1.1ftp 192.168.1.1tracert 192.168.1.139Refer to the exhibit. Which option shows the correct topology given the configuration of Router1?40If an administrator wished to return a router to the default state, what additional step must be taken after issuing the comma start-up config?Reload the device.Issue the command copy running-config start-up config.Perform a show running-config to verify that the file was removed.Enter the interface commands to allow the device to connect to the network.41By using the ipconfig command, a network administrator determines that a workstation has the address 192.168.3.38 with the subnet mask. To what network does the workstation belong?192.168.3.8192.168.3.16192.168.3.24192.168.3.3242Which statement is true about router hostnames?A hostname should be unique on each router.A router hostname cannot contain capital letters.A router hostname is configured in privileged executive mode.A router hostname must be created before any other configurations can be added to the device.43 A user types the enable command. What task can be performed at the privileged EXEC mode?Configure the device.Configure individual interfaces.Configure individual terminal lines.Issue show and debug commands.44Refer to the exhibit. Which logical topology describes the exhibited network?starringpoint-to-pointmulti-access45Refer to the exhibit. A user wants to access the Internet from the PC. A part of the running configuration of the router is sho default gateway IP address should be configured at the PC to enable this access?10.1.192.110.1.192.210.1.192.54192.31.7.146Which statement is true about the ICMP protocol?It is an application layer protocol.It is designed to make IP a reliable protocol.It is often filtered out of networks for security purposes.If a host does not respond to an ICMP echo request, the host is not functioning.47Refer to the exhibit. At which OSI layer is serial interface 0/0/1 experiencing problems?Layer 1Layer 2Layer 3Layer 448Refer to the exhibit. The host was disconnected from switch 2 and connected to switch 1. Which combination of IP address mask, and default gateway should be assigned to this host to allow it to function in the network?IP address: 10.10.9.37 Subnet mask: 255.255.255.240 Default gateway: 10.10.9.35IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35IP address: 10.10.9.29 Subnet mask: 255.255.255.248 Default gateway: 10.10.9.35IP address: 10.10.9.32 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 196.1.105.6IP address: 10.10.9.63 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.3549Refer to the exhibit. The diagram represents the process of sending email between clients. Select the list below that correc the component or protocol used at each numbered stage of the diagram.1.MUA2.MDA3.MTA4.SMTP5.MTA6.POP7.MDA8.MUA1.MUA2.POP3.MDA4.SMTP5.MTA6.MDA7.SMTP8.MUA1.MUA2.POP3.SMTP4.MDA5.MTA6.SMTP7.POP8.MUA1.MDA2.SMTP3.MTA4.SMTP5.MTA6.MUA7.POP8.MDA1.MUA2.SMTP3.MTA4.SMTP5.MTA6.MDA7.POP8.MUA50What is the Cisco IOS?system software for Cisco devicesRead Only Memory in Cisco devicesnon-volatile storage for device configurationsan initial operating system that is used for boot functions。

思科网络第一学期1-5章中文测试题及答案

ENetwork Chapter 2 - CCNA Exploration: 网络基础知识(版本4.0) 1在封装过程中，数据链路层执行什么操作？不添加地址。

添加逻辑地址。

添加物理地址。

添加进程的端口号。

2TCP/IP 网络接入层有何作用？路径确定和数据包交换数据表示、编码和控制可靠性、流量控制和错误检测详细规定构成物理链路的组件及其接入方法将数据段划分为数据包3数据链路层封装添加的报尾信息有何主要功能？支持差错校验确保数据按照顺序到达确保送达正确目的标识本地网络中的设备帮助中间设备进行处理和路径选择4请参见图示。

下列哪组设备仅包含终端设备？A、C、DB、E、G、HC、D、G、H、I、JD、E、F、H、I、JE、F、H、I、J5OSI 模型各层从最高层到最低层的正确顺序如何？物理层、网络层、应用层、数据链路层、表示层、会话层、传输层应用层、物理层、会话层、传输层、网络层、数据链路层、表示层应用层、表示层、物理层、会话层、数据链路层、传输层、网络层应用层、表示层、会话层、传输层、网络层、数据链路层、物理层表示层、数据链路层、会话层、传输层、网络层、物理层、应用层6下列哪三项陈述是对局域网(LAN) 最准确的描述？（选择三项）LAN 通常位于一个地域内。

此类网络由由一个组织管理。

LAN 中的不同网段之间一般通过租用连接的方式连接。

此类网络的安全和访问控制由服务提供商控制。

LAN 为同一个组织内的用户提供网络服务和应用程序访问。

此类网络的每个终端通常都连接到电信服务提供商(TSP)。

7第4 层端口指定的主要作用是什么？标识本地介质中的设备标识源设备和目的设备之间的跳数向中间设备标识通过该网络的最佳路径标识正在通信的源终端设备和目的终端设备标识终端设备内正在通信的进程或服务8以下哪种特征正确代表了网络中的终端设备？管理数据流发送数据流重新定时和重新传输数据信号确定数据传输路径9请参见图示。

思科期末考试题库和答案

思科期末考试题库和答案一、单选题1. 在思科网络技术中，OSI模型的第4层是什么？A. 传输层B. 会话层C. 表示层D. 应用层答案：A2. 以下哪个协议是用于在网络层进行路由选择的？A. TCPB. IPC. UDPD. FTP答案：B3. 动态主机配置协议（DHCP）工作在OSI模型的哪一层？A. 应用层B. 传输层C. 网络层D. 数据链路层答案：D4. 以下哪个命令用于在思科设备上查看当前配置？A. show running-configB. show startup-configC. show interface statusD. show ip route答案：A5. 在思科设备上，哪个命令用于保存当前的配置到启动配置中？A. copy running-config startup-configB. copy startup-config running-configC. saveD. write答案：A二、多选题6. 以下哪些是思科交换机上常用的端口类型？A. FastEthernetB. GigabitEthernetC. TenGigabitEthernetD. Serial答案：A, B, C, D7. 在思科设备上，以下哪些命令用于管理VLAN？A. vlan databaseB. enableC. configure terminalD. exit答案：A, C8. 以下哪些是思科路由器上常用的接口类型？A. FastEthernetB. GigabitEthernetC. SerialD. ATM答案：A, B, C, D9. 以下哪些是思科设备上用于查看网络状态的命令？A. show ip interface briefB. show running-configC. show interface statusD. ping答案：A, C, D10. 在思科设备上，以下哪些命令用于配置静态路由？A. ip routeB. ip routingC. routeD. configure terminal答案：A, D三、判断题11. 思科的IOS（Internetworking Operating System）是运行在所有思科设备上的软件。

思科第一学期期末考试最新答案

初始配置？
FTP客户端
Tel net客户端
终端仿真程序
Web浏览器
请参见图示。哪种逻辑拓扑是对图示网络的准确描述?
广星型
环型
点对点
多路访问
3层头部包含的哪一项信息可帮助数据传输?
端口号
设备物理地址
目的主机逻辑地址
虚拟连接标符
管理员对设备做出了更改，但更改没有达到预期效果。管理员可以采取什么措施来恢复
要将数据包发送到远程网络，应使用哪种设备?
访问交换机
DHCP服务器
集线器
路由器
OSI哪一层使用面向连接的协议来确保数据的可靠传输?
应用层
表示层
会话层
传输层
请参见图示。根据显示的IP配置回答，主机A和主机B无法在本地网络外通信的原因是什么？
对主机A分配了网络地址。
对主机B分配了组播地址。
主机A和主机B属于不同的网络。
erase start- up config命令。
对网关地址分配了广播地址。
请参见图示。对于从主机A向Web服务器发出的网页请求，正确的目的套接字数字是什么
00-08-a3-b6-ce-46
198.133.219.25:80
htt p://
C 172.18.0.0/24 is directly conn ected, FastEthernet。/。
在Cisco IOS设备中，启动配置文件存储于何处?
闪存
NVRAM
RAM
ROM
在配置路由器时，网络技术人员想要命名路由器。输入示？
Router〉
Router#
Router(co nfig)#
Router(co nfig-li ne)#

(完整版)ccna1章节与期末答案

第一章：正确答案：2.4.5•解析：由于不需要使用网络设备和专用服务器，对等网络易于创建，复杂性更低，且成本更少。

而且对等网络也没有集中管理。

正确答案：3和4解析：终端设备上的应用程序可以生成数据，更改数据内容并且负责启动封装过程。

正确答案：1和4解析：终端设备会发出通过网络传输的数据。

中间设备会在链路发生故障时通过备用路径传输数据，并且会过滤数据传输以增强安全性。

网络介质提供网络消息的传输通道。

正确答案：4解析：外联网是公司外部的人或企业合作伙伴访问数据的网络区域。

内部网只描述通常仅供内部人员访问的网络区域。

当设备连接到有线网络时，有线LAN 会受BYOD（自带设备）影响。

使用大学无线LAN 的设备多为平板电脑和智能手机。

大学生主要使用无线WAN 来访问他们的手机运营商网络。

.正确答案：2解析：由于通过Internet 可以联系在线供应商，所以家庭用户通过Internet 进行网上购物。

内联网基本上是仅供内部使用的局域网。

外联网是外部合作伙伴访问组织内部特定资源的网络。

家庭用户并不一定使用LAN 来访问Internet。

例如，PC 可以通过调制解调器直接连接到ISP。

正确答案：1解析：内部网这个术语用于表示一个组织的私有局域网和广域网连接。

内部网的设计旨在仅允许该组织的成员、员工或其他获得授权的人员进行访问。

正确答案：2和4解析：电缆和DSL 均能实现高带宽、始终联网，并提供到主机计算机或LAN 的以太网连接。

10正确答案：2和3解析：移动电话连接需要使用移动电话网络。

卫星连接通常用于家庭或企业外部不便使用物理布线的位置。

11正确答案：2解析：当对网络资源的请求超出了可用容量时，网络就会变得拥堵。

CCNA第一学期Finalexam考试英文版答案

CCNA第一学期Finalexam考试英文版答案(R&S.)C 1A medium-sized business is researching available options for connecting to the Internet.Thecompany is looking for a high speed option with dedicated, symmetric access.Whichconnection type should the company choose?DSLdialupsatelliteleased linecable modem2What is the purpose of having a converged network?to provide high speed connectivity to all end devicesto make sure that all types of data packets will be treated equallyto achieve fault tolerance and high availability of data network infrastructure devicesto reduce the cost of deploying and maintaining thecommunication infrastructure3What characteristic of a network enables it to quickly grow to support new users andapplications without impacting the performance of the service being delivered to existing users?reliabilityscalabilityquality of serviceaccessibility4Which connection provides a secure CLI session with encryption to a Cisco switch?a console connectionan AUX connectiona Telnet connectionan SSH connection5A network technician is attempting to configure an interface by entering the followingcommand:SanJose(config)#ip address192.168.2.1255.255.255.0.The command isrejected by the device.What is the reason for this? The command is being entered from the wrong mode of operation.The command syntax is wrong.The subnet mask information is incorrect.The interface is shutdown and must be enabled before the switch will accept the IP address.6After several configuration changes are made to a router, the copy running-configurationstartup-configuration command is issued.Where will the changes be stored?flashROMNVRAMRAMthe configuration registera TFTP server7Refer to the exhibit.From global configuration mode,an administrator is attempting to create a message-of-the-day banner by using thecommand banner motd V Authorized access only!Violators will be prosecuted!V When users log in using Telnet,the banner does not appear correctly.What is the problem? The banner message is too long.The delimiting character appears in the banner message.The symbol“!”signals the end of a banner message.Message-of-the-day banners will only appear when a user logs in through the console port.8What are three characteristics of an SVI?(Choose three.) It is designed as a security protocol to protect switch ports.It is not associated with any physical interface on a switch.It is a special interface that allows connectivity by different types of media.It is required to allow connectivity by any device at any location.It provides a means to remotely manage a switch.It is associated with VLAN1by default.9A technician configures a switch with these commands: SwitchA(config)#interface vlan1SwitchA(config-if)#ip address192.168.1.1255.255.255.0 SwitchA(config-if)#no shutdownWhat is the technician configuring?Telnet accessSVIpassword encryptionphysical switchport access10In computer communication,what is the purpose of message encoding?to convert information to the appropriate form for transmissionto interpret informationto break large messages into smaller framesto negotiate correct timing for successful communication11What protocol is responsible for controlling the size of segments and the rate at whichsegments are exchanged between a web client and a web server?TCPIPHTTPEthernet12What are two benefits of using a layered network model? (Choose two.)It assists in protocol design.It speeds up packet delivery.It prevents designers from creating their own model.It prevents technology in one layer from affecting other layers.It ensures a device at one layer can function at the next higher layer.13What is the process of dividing a data stream into smaller pieces before transmission?segmentationencapsulationencodingflow control14When IPv4addressing is manually configured on a web server,which property of the IPv4configuration identifies the network and host portion for an IPv4address?DNS server addresssubnet maskdefault gatewayDHCP server address15A network administrator is troubleshootingconnectivity issues on a ing a tester,the administrator notices that the signals generated by the server NIC are distorted and not usable.In which layer of the OSI model is the error categorized?presentation layernetwork layerphysical layerdata link layer16A network engineer is measuring the transfer of bits across the company backbone for amission critical database application.The engineer notices that the network throughputappears lower than the bandwidth expected.Which three factors could influence thedifferences in throughput?(Choose three.)the amount of traffic that is currently crossing the networkthe sophistication of the encapsulation method applied to the datathe type of traffic that is crossing the networkthe latency that is created by the number of network devices that the data is crossingthe bandwidth of the WAN connection to the Internetthe reliability of the gigabit Ethernet infrastructure of the backbone17Which type of UTP cable is used to connect a PC to a switch port?consolerollovercrossoverstraight-through18What is a characteristic of the LLC sublayer?It provides the logical addressing required that identifies the device.It provides delimitation of data according to the physical signaling requirements of the medium.It places information in the frame allowing multiple Layer 3protocols to use the same network interface and media.It defines software processes that provide services to the physical layer.19What are the three primary functions provided by Layer 2data encapsulation?(Choosethree.)error correction through a collision detection methodsession control using port numbersdata link layer addressingplacement and removal of frames from the mediadetection of errors through CRC calculationsdelimiting groups of bits into framesconversion of bits into data signals20What will a host on an Ethernet network do if it receives a frame with a destination MACaddress that does not match its own MAC address?It will discard the frame.It will forward the frame to the next host.It will remove the frame from the media.It will strip off the data-link frame to check the destination IP address.21What are two actions performed by a Cisco switch? (Choose two.)building a routing table that is based on the first IP address in the frame headerusing the source MAC addresses of frames to build and maintain a MAC address tableforwarding frames with unknown destination IP addresses to the default gatewayutilizing the MAC address table to forward frames via the destination MAC addressexamining the destination MAC address to add new entries to the MAC address table22What are two examples of the cut-through switching method?(Choose two.)store-and-forward switchingfast-forward switchingCRC switchingfragment-free switchingQOS switching23Refer to the exhibit.If host A sends an IP packet to host B,what will the destination address be in the frame when it leaves host A?DD:DD:DD:DD:DD:DD172.168.10.99CC:CC:CC:CC:CC:CC172.168.10.65BB:BB:BB:BB:BB:BBAA:AA:AA:AA:AA:AA24What are two services provided by the OSI network layer?(Choose two.)performing error detectionrouting packets toward the destinationencapsulating PDUs from the transport layerplacement of frames on the mediacollision detection25What information is added during encapsulation at OSI Layer3?source and destination MACsource and destination application protocolsource and destination port numbersource and destination IP address26What are two functions of NVRAM?(Choose two.)to store the routing tableto retain contents when power is removedto store the startup configuration fileto contain the running configuration fileto store the ARP table27Refer to the exhibit.The network administrator for a small advertising company has chosen to use the192.168.5.96/27 network for internal LAN addressing.As shown in the exhibit,a static IP address is assigned to the company web server.However,the web server cannot access the Internet.The administrator verifies that local workstations with IP addresses that are assigned by a DHCP server can access the Internet,and the web server is able to ping local workstations.Which component is incorrectly configured?subnet maskDNS addresshost IP addressdefault gateway address28Why does a Layer3device perform the ANDing process on a destination IP address andsubnet mask?to identify the broadcast address of the destination networkto identify the host address of the destination hostto identify faulty framesto identify the network address of the destination network29What are the three ranges of IP addresses that are reserved for internal private use?(Choosethree.)10.0.0.0/864.100.0.0/14127.16.0.0/12172.16.0.0/12192.31.7.0/24192.168.0.0/1630Which three addresses are valid public addresses? (Choose three.)198.133.219.17192.168.1.24510.15.250.5128.107.12.117192.15.301.24064.104.78.22731What type of IPv6address is FE80::1?loopbacklink-localmulticastglobal unicast32Refer to the exhibit.On the basis of the output,which two statements about network connectivity are correct? (Choose two.)There is connectivity between this device and the device at192.168.100.1.The connectivity between these two hosts allows for videoconferencing calls.There are4hops between this device and the device at 192.168.100.1.The average transmission time between the two hosts is2 milliseconds.This host does not have a default gateway configured.33Which subnet would include the address192.168.1.96as a usable host address?192.168.1.64/26192.168.1.32/27192.168.1.32/28192.168.1.64/2934How many hosts are addressable on a network that has a mask of255.255.255.248?268141625435Which statement is true about variable-length subnet masking?Each subnet is the same size.The size of each subnet may be different,depending on requirements.Subnets may only be subnetted one additional time.Bits are returned,rather than borrowed,to create additional subnets.36Refer to the exhibit.Consider the IP address of 192.168.10.0/24that has been assigned to a high school building.The largest network in this building has100 devices.If192.168.10.0is the network number for the largest network,what would be the network number for thenext largest network,which has40devices?192.168.10.0192.168.10.128192.168.10.192192.168.10.224192.168.10.24037In what two situations would UDP be the preferred transport protocol over TCP?(Choosetwo.)when applications need to guarantee that a packet arrives intact,in sequence,and unduplicatedwhen a faster delivery mechanism is neededwhen delivery overhead is not an issuewhen applications do not need to guarantee delivery of the datawhen destination port numbers are dynamic38What important information is added to the TCP/IPtransport layer header to ensurecommunication and connectivity with a remote network device?timing and synchronizationdestination and source port numbersdestination and source physical addressesdestination and source logical network addresses39What is the TCP mechanism used in congestion avoidance? three-way handshakesocket pairtwo-way handshakesliding window40Which three statements characterize UDP?(Choose three.)UDP provides basic connectionless transport layer functions.UDP provides connection-oriented,fast transport of data at Layer 3.UDP relies on application layer protocols for error detection.UDP is a low overhead protocol that does not provide sequencing or flow control mechanisms.UDP relies on IP for error detection and recovery.UDP provides sophisticated flow control mechanisms.41Which two tasks are functions of the presentation layer? (Choose two.)compressionaddressingencryptionsession controlauthentication42Which two protocols operate at the highest layer of the TCP/IP protocol stack?(Choose two.)DNSEthernetIPPOPTCPUDP43Which two roles can a computer assume in a peer-to-peer network where a file is beingshared between two computers?(Choose two.)clientmasterserverslavetransient44What is the function of the HTTP GET message?to request an HTML page from a web serverto send error information from a web server to a web clientto upload content to a web server from a web clientto retrieve client email from an email server using TCP port11045A wireless host needs to request an IP address.What protocol would be used to process therequest?FTPHTTPDHCPICMPSNMP46When planning for network growth,where in the network should packet captures take place toassess network traffic?on as many different network segments as possibleonly at the edge of the networkbetween hosts and the default gatewayonly on the busiest network segment47When applied to a router,which command would help mitigate brute-force password attacksagainst the router?exec-timeout30service password-encryptionbanner motd$Max failed logins=5$login block-for60attempts5within6048Refer to the exhibit.An administrator is testing connectivity to a remote device with the IP address10.1.1.1.What does the output of this command indicate?Connectivity to the remote device was successful.A router along the path did not have a route to the destination.A ping packet is being blocked by a security device along the path.The connection timed out while waiting for a reply fromthe remote device.。

思科CCNA第一学期期末考试答案

下列哪个端口号范围为服务器上运行的应用程序常用的服务而保留10 到2550 到10231024 到4915149152 到655352以下哪组网络ID 和子网掩码正确标识了从172.16.128.0 到172.16.159.255 的所有IP 地址172.16.128.0 255.255.255.224172.16.128.0 255.255.0.0172.16.128.0 255.255.192.0172.16.128.0 255.255.224.0172.16.128.0 255.255.255.1923以下哪个OSI 协议层提供面向连接的可靠数据通信服务应用层演示文稿会话传输层network4何时必须使用clock rate命令配置路由器串行接口当该接口充当DTE 设备时当该接口计时器已经清除时当连接的DTE 设备关闭时当该接口充当DCE 设备时5下列哪些是私有IP 地址的地址范围选择三项;10.0.0.0 到10.255.255.255200.100.50.0 到200.100.25.255150.150.0.0 到150.150.255.255172.16.0.0 到172.31.255.255192.168.0.0 到192.168.255.255127.16.0.0 到127.31.255.2556请参见图示;每条介质链路都已标记;应该使用哪种类型的电缆连接不同设备连接1 - 全反电缆连接2 - 直通电缆连接3 - 交叉电缆连接1 - 交叉电缆连接2 - 全反电缆连接3 - 交叉电缆连接1 - 直通电缆连接2 - 交叉电缆连接3 - 交叉电缆连接1 - 直通电缆连接2 - 交叉电缆连接3 - 直通电缆连接1 - 交叉电缆连接2 - 直通电缆连接3 - 交叉电缆7请参见图示;IP 地址192.168.33.2 代表什么主机的默认网关;主机的IP 地址;主机的首选域名服务器;网站resolver1.mooki.local 的IP 地址;主机的主页IP 地址;8请参见图示;对图示拓扑可以得出哪两项结论选择两项存在一个广播域;需要两个逻辑地址范围;显示了三个广播域;需要四个网络;存在五个冲突域;9哪些类型的介质不受EMI 和RFI 影响选择两项10 Base-T10 Base-210 Base-5100 Base-FX100 Base TX1000 Base LX10请参见图示;下列关于图中所示IP 配置的陈述,哪三项是正确的选择三项分配给该计算机的地址代表私有地址;该计算机无法在本地网络外通信;此计算机的网络可支持126 台主机;该计算机地址的前缀是/27;分配给该计算机的IP 地址可在Internet 上路由;分配给该计算机的IP 地址是广播地址;11由于发生安全规规事件,必须更改路由器口令;从以下配置项可获知什么信息选择两项;Routerconfig line vty 0 3Routerconfig-line password c13c0Routerconfig-line login这些配置项对远程访问指定了三条Telnet 线路;这些配置项对远程访问指定了四条Telnet 线路;这些配置项将控制台口令和Telnet 口令设置为"c13c0";因为Telnet 配置不完整,所以Telnet 访问将遭到拒绝;允许使用"c13c0" 作为口令访问Telnet;12作为网络管理员,假设IP 地址为172.30.0.0,能够支持510 台主机的子网掩码是什么255.255.0.0255.255.248.0255.255.252.0255.255.254.0255.255.255.0255.255.255.12813哪种口令在创建时自动加密vtyaux控制台电缆使能加密口令使能口令14第4 层报头包含帮助数据传输的哪一类信息服务端口号主机逻辑地址设备物理地址虚拟连接标识符15请参见图示;图中所示为客户端之间发送电子邮件的过程;从下列选项中选择正确标识图中各编号阶段使用的组件或协议的列表;1.MUA2.MDA3.MTA4.SMTP5.MTA6.POP7.MDA8.MUA1.MUA2.POP3.MDA4.SMTP5.MTA6.MDA7.SMTP8.MUA1.MUA2.POP3.SMTP4.MDA5.MTA6.SMTP7.POP8.MUA1.MDA2.SMTP3.MTA4.SMTP5.MTA6.MUA7.POP8.MDA1.MUA2.SMTP3.MTA4.SMTP5.MTA6.MDA7.POP8.MUA 16请参见图示;哪种逻辑拓扑是对图示网络最准确的描述星型环点对点多路访问网状17您所在的网际网络发生了路由问题;要鉴别此错误,应该检查以下哪种类型的设备接入点主机集线器路由器交换机18在Cisco IOS 设备中,启动配置文件存储于何处闪存NVRAMRAMROM19请参见图示;为了使此网络中的主机接入Internet,路由器RT_A 需要提供哪种功能地址转换DHCP 服务ftpWeb 服务器20下列哪些有关网络层编址的陈述是正确的选择三项使用平面结构防止广播分层唯一标识每台主机长48 位包括网络部分21请参见图示;假设所有设备均使用默认配置;支持显示的拓扑需要多少个子网1345722请参见图示;电缆1 和电缆2 的两端分别按照特定的物理层要求接线;表中按编号列出了每个网段以及网络技术人员在该网段不同网络组件之间已经安装的电缆;根据给定的数据回答,哪些网段的电缆安装正确选择三项网段1网段2网段3网段4网段523请参见图示;主机A 尝试与主机B 建立TCP/IP 会话;尝试期间,捕获了源MAC 地址为0050.7320.D632 而目的MAC 地址为0030.8517.44C4 的帧;捕获的帧中封装了源IP 地址为192.168.7.5 而目的IP 地址为192.168.219.24 的数据包;此数据包是在网络中哪一点捕获的离开主机A离开ATL离开Dallas离开NYC24请参见图示;下列哪两项陈述描述了报头中代表的信息选择两项这是服务器响应;使用的是UDP 协议;目的端口表示Telnet 会话;返回数据段将包含源端口23;此会话的客户端发起的下一次会话将使用源端口号13358;25下列哪种提示符代表适合copy running-config startup-config命令使用的模式Switch-6J>Switch-6JSwitch-6JconfigSwitch-6Jconfig-ifSwitch-6Jconfig-line26请参见图示;根据显示的IP 配置回答,主机A 和主机B 无法在本地网络外通信的原因是什么对主机A 分配了网络地址;对主机B 分配了组播地址;主机A 和主机B 属于不同的网络;对网关地址分配了广播地址;27请参见图示;下列哪组设备仅包含中间设备A、B、D、GA、B、E、FC、D、G、IG、H、I、J28请参见图示;主机A 正在向主机B 传输数据;主机A 将使用什么地址作为此通信中的目的IP 地址和目的MAC 地址目的MAC：BBBB:BBBB:BBBB 目的IP：172.22.0.62目的MAC：DDDD:DDDD:DDDD 目的IP：172.22.0.75目的MAC：EEEE:EEEE:EEEE 目的IP：172.22.0.62目的MAC：BBBB:BBBB:BBBB 目的IP：172.22.0.75目的MAC：EEEE:EEEE:EEEE 目的IP：172.22.0.75目的MAC：DDDD:DDDD:DDDD 目的IP：172.22.0.9429下列哪三项陈述说明了传输层协议的特征选择三项应用层协议使用TCP 端口号和UDP 端口号;TCP 使用端口号提供可靠的IP 数据包传输;UDP 使用窗口和确认获得可靠的数据传输;TCP 使用窗口和定序提供可靠的数据传输;TCP 是面向连接的协议;UDP 是无连接协议;30请参见图示;当计算机A 向计算机D 发送帧时,哪些计算机会接收该帧仅计算机D仅计算机A 和计算机D仅计算机B、计算机C 和计算机D所有计算机31请参见图示;包含路由器B 的网络遇到问题;助理网络工程师已确定此网络的问题出在路由器B;执行什么操作可以纠正该网络问题在接口FastEthernet 0/0 上发出ip address命令在接口FastEthernet 0/1 上发出no shutdown命令在接口Serial 0/0/0 上发出clock rate命令在接口Serial 0/0/1 上发出description命令32当OSI 模型下层执行无连接协议时,通常使用什么来确认数据接收并请求重传丢失的数据无连接确认面向连接的上层协议网络层IP 协议传输层UDP 协议33请参见图示;网络管理员从PC1 远程访问RouterB 的CLI;下列有关用于建立此连接的应用层协议的陈述中,哪两项是正确的选择两项数据经过加密;该连接类型称为VTY 会话;服务器进程在PC1 上运行;GET 请求发送到RouterB;服务、协议和客户端的应用名称相同;34请参见图示;对于从主机A 向Web 服务器发出的网页请求,正确的目的套接字数字是什么00-08-a3-b6-ce-46198.133.219.25:80http://.ciscoC 172.18.0.0/24 is directly connected, FastEthernet0/035查看图示与当前配置;秘书办公室的主机A 由于故障被更换;尽管更换的计算机可以成功ping 通127.0.0.1,但却无法访问公司网络;问题的原因可能是什么IP 地址输入有误网络电缆没有插好子网掩码输入有误网卡故障36IP 依靠OSI 哪一层的协议来确定数据包是否已丢失并请求重传应用层表示层会话层传输层37一位技术人员必须通过要求提供口令来确保交换机特权执行模式的安全;哪种类型的口令能满足此类登录的需要并可视为最安全的口令控制台电缆使能使能加密口令VTY38请参见图示;一台路由器其路由表如图所示收到发往192.168.1.4 的数据包;路由器将如何处理该数据包丢弃该数据包;通过FastEthernet 0/0 转发该数据包;将该数据包转发到目的主机;将该数据包转发到下一跳地址192.168.1.3;39下列哪三项是CSMA/CD 的特征选择三项可以将设备配置为较高的传输优先级;堵塞信号表示冲突已消除,介质不再占用;设备侦听并等到介质未被占用后再传输;冲突后只有拥有电子令牌的设备才能传输;网段中的所有设备都知道网络介质中传输的数据;检测到冲突后,主机可以在随机延迟时间到期后尝试重新传输;40PC 无法连接到任何远程网站,无法ping 通其默认网关,也无法ping 通本地网段中工作正常的打印机;以下哪项操作可以确认此PC 上的TCP/IP 协议栈是否工作正常在该主机的命令提示符后使用ipconfig /all命令;在命令提示符后使用ping 127.0.0.1命令;在命令提示符后使用traceroute命令,找出网关路径中的任何故障;使用FTP 检查与远程站点的连通性;从PC 制造商网站下载故障排除工作;41请参见图示;技术人员正在处理网络问题,需要验证路由器的LAN 接口;要确认路由器接口工作正常,应该从此主机ping 哪个地址127.0.0.1192.168.64.196192.168.254.1192.168.254.9192.168.254.25442请参见图示;假设该路由器运行NAT,计算机采用哪些IP 地址可以访问Internet 选择三项192.168.18.38192.168.18.48192.168.18.49192.168.18.52192.168.18.59192.168.18.6343在封装过程中,传输层添加什么标识符路由数据包的两个网络进行数据通信的两个应用程序分别位于通信两端的两台主机本地网络中交换帧的两个节点44请参见图示;网络技术人员试图确定主机A 的正确IP 地址配置;以下哪一项是主机A 的有效配置IP 地址：192.168.100.19；子网掩码：255.255.255.248；默认网关：192.16.1.2IP 地址：192.168.100.20；子网掩码：255,255,255,240；默认网关：192.168.100.17IP 地址：192.168.100.21；子网掩码：255,255,255,248；默认网关：192.168.100.18IP 地址：192.168.100.22；子网掩码：255,255,255,240；默认网关：10.1.1.5IP 地址：192.168.100.30；子网掩码：255,255,255,240；默认网关：192.168.1.1IP 地址：192.168.100.31；子网掩码：255,255,255,240；默认网关：192.168.100.1845请参见图示;主机A 上需要安装什么才能支持网络技术人员创建Router1 的初始配置FTP 客户端telnet 客户端终端仿真程序Web 浏览器46OSI 模型的哪两项功能在第2 层实现选择两项物理编址编码路由布线介质访问控制47下列哪三个IPv4 地址代表子网的广播选择三项172.16.4.63 /26172.16.4.129 /26172.16.4.191 /26172.16.4.51 /27172.16.4.95 /27172.16.4.221 /2748请参见图示;从给定信息可以得出以下哪两个结论选择两项此交换是三次握手的一部分;源端口表示已经发起了Telnet 会话;数据正从服务器流向客户端;目的端口表示已经发起了HTTP 会话;列出的数据与传输层相关;源端口不支持与列出的目的端口通信;。

ccna考试题及答案

ccna考试题及答案1. 以下哪项是网络层的功能？A. 路由选择B. 错误检测C. 流量控制D. 封装数据包答案：A2. 在OSI模型中，哪一层负责在网络中传输数据？A. 应用层B. 传输层C. 会话层D. 网络层答案：D3. 以下哪个协议是用于在IP网络中发现网络设备的？A. ARPB. RARPC. ICMPD. OSPF答案：A4. 在TCP/IP模型中，哪一层与OSI模型的传输层相对应？A. 应用层B. 互联网层C. 网络接口层D. 传输层答案：D5. 以下哪个地址是一个有效的IPv4地址？A. 192.168.1.256B. 192.168.1.1C. 10.0.0.0D. 172.16.300.1答案：B6. 在配置路由器时，以下哪个命令用于进入全局配置模式？A. enableB. configure terminalC. privileged execD. user exec答案：B7. 以下哪个命令用于在Cisco设备上显示当前配置？A. show running-configB. show startup-configC. show configD. show current-config答案：A8. 在Cisco设备上，以下哪个命令用于保存当前的配置到启动配置文件？A. copy running-config startup-configB. copy startup-config running-configC. save running-configD. save startup-config答案：A9. 以下哪个命令用于在Cisco设备上查看所有接口的状态？A. show interfacesB. show ip interface briefC. show interface statusD. show running-config interface答案：B10. 在Cisco设备上，以下哪个命令用于关闭接口？A. shutdownB. no shutdownC. disableD. no enable答案：A11. 以下哪个命令用于在Cisco设备上启用接口？A. shutdownB. no shutdownC. disableD. no enable答案：B12. 在配置静态路由时，以下哪个命令用于指定下一跳地址？B. ip static-routeC. route ipD. static-route ip答案：A13. 以下哪个命令用于在Cisco设备上清除ARP表？A. clear arp-cacheB. clear arpC. clear arp tableD. clear ip arp答案：D14. 在配置动态路由协议时，以下哪个命令用于在接口上启用RIP？A. ip rip enableB. ip rip receiveD. network rip答案：C15. 以下哪个命令用于在Cisco设备上查看RIP路由表？A. show ip ripB. show ip route ripC. show ripD. show ip protocols答案：B16. 在配置EIGRP时，以下哪个命令用于指定自动汇总？A. metric weightsB. auto-summaryC. network auto-summaryD. no auto-summary答案：B17. 以下哪个命令用于在Cisco设备上查看EIGRP邻居？A. show ip eigrp neighborsB. show eigrp neighborsC. show ip eigrpD. show eigrp interfaces答案：A18. 在配置OSPF时，以下哪个命令用于指定路由器ID？A. router-idB. router ospfC. networkD. area答案：A19. 以下哪个命令用于在Cisco设备上查看OSPF路由表？A. show ip ospfB. show ip ospf databaseC. show ospfD. show ip route ospf答案：D20. 在配置VLAN时，以下哪个命令用于创建一个新的VLAN？A. vlan databaseB. configure terminalC. vlan [vlan-id]D. new-vlan答案：C21. 以下哪个命令用于将接口分配给VLAN？A. switchport mode accessB. switchport mode trunkC. switchport access vlan [vlan-id]D. switchport trunk vlan [vlan-id]答案：C22. 在配置交换机时，以下哪个命令用于将接口设置为Trunk 模式？A. switchport mode accessB. switchport mode trunkC. switchport access vlan [vlan-id]D. switchport trunk vlan [vlan-id]答案：B23. 以下哪个命令用于在Cisco设备上查看VLAN配置？A. show vlanB. show vlan briefC. show vlan detailD. show vlan all答案：B24. 在配置VTP时，以下哪个命令用于将交换机设置为VTP服务器模式？A. vtp mode serverB. vtp mode clientC. vtp mode transparentD. vtp mode off答案：A25. 以下哪个命令用于在Cisco设备上查看VTP状态？A. show vtp statusB. show vtp statisticsC. show vtp passwordD. show vtp configuration答案：A26. 在配置STP时，以下哪个命令用于设置根桥？A. spanning-tree root primaryB. spanning-tree root secondaryC. spanning-tree root primary [priority]D. spanning-tree root secondary [priority]答案：C27. 以下哪个命令用于在Cisco设备上查看STP状态？A. show spanning-treeB. show spanning-tree detailC. show spanning-tree summaryD. show spanning-tree interface答案：A28. 在配置VLAN Trunking Protocol (VTP) 时，以下哪个命令用于设置VTP域名？A. vtp domain [domain-name]B. vtp password [password]C. vtp mode [mode]D. vtp version [version]答案：A29. 以下哪个命令用于在Cisco设备上查看当前的VTP版本？A. show vtp statusB. show vtp statisticsC. show vtp passwordD. show vtp configuration答案：A30. 在配置端口安全时，以下哪个命令用于限制接口上可以学习到的最大MAC地址数量？A. switchport port-security maximum [mac-count]B. port-security maximum [mac-count]C. switchport port-security violation restrictD. port-security violation shutdown答案：A这些题目和答案仅供学习和参考之用，实际的CCNA考试内容和形式可能会有所不同。

思科第一学期期末考试考题CCNA

1Refer to the exhibit. Which Layer 2 protocol could be used inside nework A and network C?IPTCPUDPEthernet2Refer to the exhibit. Which set of devices contains only intermediary devices?A, B, D, GA, B, E, FC, D, G, IG, H, I, J3Refer to the exhibit. The headers added at each layer are shown. Which layer adds the destination and source process num ensure that data is delivered to the correct application?physical layerdata link layernetwork layertransport layer4The Layer 4 header contains which type of information to aid in the delivery of data?service port numberhost logical addressdevice physical addressvirtual connection identifier5Which fiber connector supports full-duplex Ethernet?6Which device should be used for routing a packet to a remote network?access switchDHCP serverhubrouter7Refer to the exhibit. Host A sends a frame to host C with a destination MAC address CC. The MAC address for host C is no table of switch SW1. How will SW1 handle the frame?Switch SW1 will drop the frame.Switch SW1 will forward the frame to host C.Switch SW1 will flood the frame out all ports.Switch SW1 will flood the frame out all ports except port Fa0/1.8Refer to the exhibit. A network technician has made several changes to R1 since the configuration has last been saved. Th configuration did not produce the desired changes. The technician wants to store a backup copy of the saved configurationserver before reloading. Which action will cause the unmodified data to be saved on the TFTP server?9Which three statements are true about network layer addressing? (Choose three.)It uniquely identifies each host.It assists in forwarding packets across internetworks.It uses a logical 32-bit IPv4 address.It is not a configurable address.It is a physical address.It identifies the host from the first part of the address.10What is the result of using the clock rate 56000 command at the serial interface of the router?The interface is configured as a DCE device.The interface timers are cleared.The FastEthernet interface is made to emulate a serial interface by assigning it a timing signal.The IP address for the serial interface is configured.11Examine the graphic with current configurations. Host A in the Clerical office failed and was replaced. Although a ping to 12 successful, the replacement computer cannot access the company network. With proxy ARP disabled on the Fa0/0 interfac York router, what is the likely cause of the problem?network card failurenetwork cables unpluggedIP address incorrectly enteredsubnet mask incorrectly entered12As network administrator, what is the subnet mask that allows 510 hosts given the IP address 172.30.0.0?255.255.0.0255.255.248.0255.255.252.0255.255.254.0255.255.255.0255.255.255.12813Which OSI layer uses a connection-oriented protocol to ensure reliable delivery of data?application layerpresentation layersession layertransport layer14 A network has grown too large for technicians to configure network addresses and hosts files for name resolution. Which twlayer services should be added to the server to allow these needs to be satisfied dynamically? (Choose two.)DNSFTPDHCPHTTPSMTP15Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 address w access from host A?Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.13016 A network administrator is asked to design a new addressing scheme for a corporate network. There are 60 users in the musers in the branch office, 28 users in manufacturing, 12 in the sales office, and 4 users in the research office. Which VLSM scheme that uses the 192.168.88.0/24 network will fulfill the requirements while wasting the fewest addresses?192.168.88.0/26 main192.168.88.64/26 manufacturing192.168.88.96/27 sales192.168.88.128/28 research192.168.88.0/26 main192.168.88.128/27 manufacturing192.168.88.160/28 sales192.168.88.176/29 research192.168.88.0/27 main192.168.88.64/28 manufacturing192.168.88.80/29 sales192.168.88.88/30 research192.168.88.0/27 main192.168.88.80/28 manufacturing192.168.88.96/29 sales192.168.88.104/30 research17Which physical connector type is used for a serial V.35 connection to the CSU/DSU?18Refer to the exhibit. Which two facts can be determined about the topology? (Choose two.)Four collision domains are present.One logical network is represented.Two broadcast domains are present.Three networks are needed.Three logical address ranges are required.19What are three characteristics of CSMA/CD? (Choose three.)It monitors the media for presence of a data signal.After detecting a collision, hosts can resume transmission after a random timer has expired.A jam signal is used to ensure that all hosts are aware that a collision has occurred.Devices can be configured with a higher transmission priority.Data is transmitted only when the data signal is present.It uses a token system to avoid collisions.20Refer to the exhibit. The serial interface of the router was configured with the use of the commands that are shown. The rou ping the router that is directly connected to interface serial 0/0/0. What should the network technician do to solve this probleConfigure the description at interface serial 0/0/0.Configure an IP address on interface serial 0/0/0.Remove the no shutdown command at interface serial 0/0/0Reboot the router.21Which OSI layer uses the header information to reassemble the data segments into streams?application layernetwork layerpresentation layersession layertransport layer22Refer to the exhibit. The NAT functionality of the router is enabled to provide Internet access to the PC. However, the PC is access the Internet. Which IP address should be changed to 209.165.201.1 to enable the PC to access the Internet?192.168.1.191192.168.1.101192.168.1.1192.168.1.25423Refer to the exhibit. A technician uses the nslookup command on the PC and views the output that is displayed in the exhib IP address of the primary domain name server used by the host?10.10.10.32192.168.1.5192.168.1.99192.168.2.10024Which memory contents will change as a result of using the Router# erase startup-config command on a router?RAMROMflashNVRAM25While configuring a router, a network technician wants to name the router. Which prompt should the technician see when e hostname command?Router>Router#Router(config)#Router(config-line)#26Refer to the exhibit. The PC, the routing table of which is displayed, is configured correctly. To which network device or inte IP address 192.168.1.254 belong?PCswitchrouter interface fa0/0router interface fa0/127Refer to the exhibit. A network administrator is troubleshooting a link that is down between Router1 and Router2. To correc which wire pairs need to be switched on one of the Ethernet cable ends?pair 1 and pair 2pair 1 and pair 3pair 2 and pair 3pair 2 and pair 428Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate with its default gUse the ping 127.0.0.1 command.Use the ipconfig command.Use the ipconfig/all command.Use the ping 10.0.0.254 command.29Refer to the exhibit. Host B was powered off. What change will occur in the MAC table of the switch?The table will remain unaffected.The switch will remove the MAC address at Fa0/19.The switch will retain the MAC address until host B is powered on again.The switch will rebuild the MAC table by assigning the FFFF.FFFF.FFFF address to port Fa0/19.30What information is contained in the header of Layer 3 to help data delivery?port numberdevice physical addressdestination host logical addressvirtual connection identifier31 A network technician is tasked with setting up a network for six users, but the users should be able to use their accounts toany of the six computers. What type of network should be used?workgroupP2P applicationspeer-to-peer networkclient-server network32Refer to the exhibit. A web browser is running on host PC1 with an IP address 10.10.2.2/24. A dynamic port number of 4915 to the browser. The browser sends a request for a web page to the web server with an IP address 192.168.1.254/24. Which true?The session is established using TCP, and the socket number for the web server is 192.168.1.254: 80.The session is established using TCP, and the socket number for the web server is 192.168.1.254: 49152.The session is established using UDP, and the socket number for the web server is 192.168.1.254: 80.The session is established using UDP, and the socket number for the web server is 192.168.1.254: 49152.33Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housed on the web server. application will allow this request to be started?34Refer to the exhibit. What is required on host A for a network technician to create the initial configuration on Router1?an FTP clienta Telnet clienta terminal emulation programa web browser35What are two characteristics of the data link layer? (Choose two.)It segments and reorders the data.It exchanges the frames between nodes.It defines the method by which network devices place data onto the media.It manages the transfer of data between the processes that run on each host.It retrieves signals from the media and restores them to their bit representations.36 A network administrator wants to restrict access to the router privileged EXEC mode. Which password should the administrenableauxconsoleVTY37Which three IPv4 addresses represent a broadcast for a subnet? (Choose three.)172.16.4.63 /26172.16.4.129 /26172.16.4.191 /26172.16.4.51 /27172.16.4.95 /27172.16.4.221 /2738Refer to the exhibit. Host X is unable to communicate with host Y. Which command can be run at host X to determine whic device is responsible for this failure?telnet 192.168.1.1ping 192.168.1.1ftp 192.168.1.1tracert 192.168.1.139Refer to the exhibit. Which option shows the correct topology given the configuration of Router1?40If an administrator wished to return a router to the default state, what additional step must be taken after issuing the comma start-up config?Reload the device.Issue the command copy running-config start-up config.Perform a show running-config to verify that the file was removed.Enter the interface commands to allow the device to connect to the network.41By using the ipconfig command, a network administrator determines that a workstation has the address 192.168.3.38 with the subnet mask. To what network does the workstation belong?192.168.3.8192.168.3.16192.168.3.24192.168.3.3242Which statement is true about router hostnames?A hostname should be unique on each router.A router hostname cannot contain capital letters.A router hostname is configured in privileged executive mode.A router hostname must be created before any other configurations can be added to the device.43 A user types the enable command. What task can be performed at the privileged EXEC mode?Configure the device.Configure individual interfaces.Configure individual terminal lines.Issue show and debug commands.44Refer to the exhibit. Which logical topology describes the exhibited network?starringpoint-to-pointmulti-access45Refer to the exhibit. A user wants to access the Internet from the PC. A part of the running configuration of the router is sho default gateway IP address should be configured at the PC to enable this access?10.1.192.110.1.192.210.1.192.54192.31.7.146Which statement is true about the ICMP protocol?It is an application layer protocol.It is designed to make IP a reliable protocol.It is often filtered out of networks for security purposes.If a host does not respond to an ICMP echo request, the host is not functioning.47Refer to the exhibit. At which OSI layer is serial interface 0/0/1 experiencing problems?Layer 1Layer 2Layer 3Layer 448Refer to the exhibit. The host was disconnected from switch 2 and connected to switch 1. Which combination of IP address, and default gateway should be assigned to this host to allow it to function in the network?IP address: 10.10.9.37 Subnet mask: 255.255.255.240 Default gateway: 10.10.9.35IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35IP address: 10.10.9.29 Subnet mask: 255.255.255.248 Default gateway: 10.10.9.35IP address: 10.10.9.32 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 196.1.105.6IP address: 10.10.9.63 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.3549Refer to the exhibit. The diagram represents the process of sending email between clients. Select the list below that correc the component or protocol used at each numbered stage of the diagram.1.MUA2.MDA3.MTA4.SMTP5.MTA6.POP7.MDA8.MUA1.MUA2.POP3.MDA4.SMTP5.MTA6.MDA7.SMTP8.MUA1.MUA2.POP3.SMTP4.MDA5.MTA6.SMTP7.POP8.MUA1.MDA2.SMTP3.MTA4.SMTP5.MTA6.MUA7.POP8.MDA1.MUA2.SMTP3.MTA4.SMTP5.MTA6.MDA7.POP8.MUA50What is the Cisco IOS?system software for Cisco devicesRead Only Memory in Cisco devicesnon-volatile storage for device configurationsan initial operating system that is used for boot functions。

思科网院考试题库和答案

思科网院考试题库和答案一、单选题1. 思科网院课程中，CCNA（Cisco Certified Network Associate）认证主要涉及哪些技术领域？A. 网络基础B. 网络安全C. 无线网络D. 云服务答案：A2. 在思科网院的课程中，OSI模型的第3层是什么？A. 应用层B. 传输层C. 数据链路层D. 网络层答案：D3. 以下哪个协议是用于在IP网络中路由数据包的？A. TCPB. UDPC. IPD. ICMP答案：C4. 思科网院课程中，哪个设备用于连接不同网络或子网？A. 路由器B. 交换机C. 集线器D. 网桥答案：A5. 在思科网院课程中，VLAN（虚拟局域网）的主要作用是什么？A. 提高网络速度B. 提高网络安全性C. 增加网络带宽D. 减少网络延迟答案：B二、多选题6. 思科网院课程中，以下哪些因素会影响网络的性能？A. 带宽B. 延迟C. 丢包率D. 网络拓扑结构答案：A, B, C, D7. 在思科网院课程中，以下哪些设备属于网络核心层设备？A. 路由器B. 交换机C. 集线器D. 网桥答案：A, B8. 思科网院课程中，以下哪些协议属于传输层协议？A. TCPB. UDPC. IPD. ICMP答案：A, B9. 在思科网院课程中，以下哪些因素可以提高网络的安全性？A. 使用防火墙B. 定期更新软件C. 限制不必要的服务D. 使用VPN答案：A, B, C, D10. 思科网院课程中，以下哪些技术可以用于网络故障排除？A. PINGB. TRACEROUTEC. SHOW COMMANDSD. PACKET TRACER答案：A, B, C, D三、判断题11. 思科网院课程中，IP地址192.168.1.1是一个公网IP地址。

（对/错）答案：错12. 在思科网院课程中，交换机可以减少网络中的冲突域。

（对/错）答案：对13. 思科网院课程中，路由器的主要功能是在不同网络之间转发数据包。

CCNA期末考试题及答案试卷A(仅供参考)

1.下列有关网络层编址的陈述中哪三项是正确的?（选择三项。

）网络层编址使用分层式结构。

使用长度为48 位的地址。

以太网交换机可以使用它来作出转发决定。

它不支持广播。

其使用的编址方法可以识别地址的网络部分。

网络层编址可以区分每台主机。

2请参见图示。

网络中的所有设备均使用默认配置。

此拓扑中存在多少个广播域？3579113请参见图示。

主机B 已断电。

交换机的MAC 表将发生什么变化？MAC 表不会受影响。

交换机会在Fa0/19 上删除MAC 地址。

交换机会保留MAC 地址，直到主机B 再次通电。

交换机将通过为端口Fa0/19 分配地址FFF.FFFF.FFFF 来重建MAC表。

4.请参见图示。

为了使此网络中的主机接入Internet，路由器RT_A 需要提供哪种功能？地址转换DHCP 服务ftpWeb 服务器5.哪三个地址属于私有IP 地址？（选择三项。

）10.0.0.1127.0.0.1150.0.0.1172.16.0.1192.168.0.1200.100.50.16请参见图示。

电缆1 和电缆2 分别按照特定的物理层要求接线。

表中按编号列出了每个网段以及该网段中用来连接网络组件的电缆。

哪三个网段安装的电缆是正确的？（选择三项。

）网段1网段2网段3网段4网段5网段67.OSI 模型的哪两项功能在第2 层实现？（选择两项）物理编址编码路由布线介质访问控制8.请参见图示。

网络管理员想通过Modem1 从PC1 远程访问路由器的CLI。

要实现此访问，应将路由器的哪一个端口连接到Modem2？控制台端口以太网端口辅助端口串行端口9请参见图示。

某学生对5e 类电缆两端的接线方法如图所示。

结果是什么？（选择两项）电缆无法使用，必须重新接线。

该电缆适合作为全反电缆使用。

该电缆适合作为快速以太网交叉电缆使用。

该电缆适合作为千兆以太网直通电缆使用。

该电缆适合在支持Auto-MDIX 的两台100 Mbps 交换机之间使用。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

1Refer to the exhibit. Which Layer 2 protocol could be used inside nework A and network C?IPTCPUDPEthernet2Refer to the exhibit. Which set of devices contains only intermediary devices?A, B, D, GA, B, E, FC, D, G, IG, H, I, J3Refer to the exhibit. The headers added at each layer are shown. Which layer adds the destination and source pro to ensure that data is delivered to the correct application?physical layerdata link layernetwork layertransport layer4T he Layer 4 header contains which type of information to aid in the delivery of data?service port numberhost logical addressdevice physical addressvirtual connection identifier5Which fiber connector supports full-duplex Ethernet?6W hich device should be used for routing a packet to a remote network?access switchDHCP serverhubrouter7Refer to the exhibit. Host A sends a frame to host C with a destination MAC address CC. The MAC address for h in the MAC table of switch SW1. How will SW1 handle the frame?Switch SW1 will drop the frame.Switch SW1 will forward the frame to host C.Switch SW1 will flood the frame out all ports.Switch SW1 will flood the frame out all ports except port Fa0/1.8Refer to the exhibit. A network technician has made several changes to R1 since the configuration has last bee modified configuration did not produce the desired changes. The technician wants to store a backup copy of the saved c on a TFTP server before reloading. Which action will cause the unmodified data to be saved on the TFTP serve9Which three statements are true about network layer addressing? (Choose three.)It uniquely identifies each host.It assists in forwarding packets across internetworks.It uses a logical 32-bit IPv4 address.It is not a configurable address.It is a physical address.It identifies the host from the first part of the address.10W hat is the result of using the clock rate 56000 command at the serial interface of the router?The interface is configured as a DCE device.The interface timers are cleared.The FastEthernet interface is made to emulate a serial interface by assigning it a timing signal.The IP address for the serial interface is configured.11Examine the graphic with current configurations. Host A in the Clerical office failed and was replaced. Altho 127.0.0.1 was successful, the replacement computer cannot access the company network. With proxy ARP disabled interface of the New York router, what is the likely cause of the problem?network card failurenetwork cables unpluggedIP address incorrectly enteredsubnet mask incorrectly entered12A s network administrator, what is the subnet mask that allows 510 hosts given the IP address 172.30.0.0?255.255.0.0255.255.248.0255.255.252.0255.255.254.0255.255.255.0255.255.255.12813Which OSI layer uses a connection-oriented protocol to ensure reliable delivery of data?application layerpresentation layersession layertransport layer14A network has grown too large for technicians to configure network addresses and hosts files for name resolutio application layer services should be added to the server to allow these needs to be satisfied dynamically? (DNSFTPDHCPHTTPSMTP15Refer to the exhibit. Host A wants to access the Internet. Which combination of a Layer 2 address and a Layer 3 enable this access from host A?Destination MAC: 0030.8596.DE83 Default gateway: 209.165.202.130Destination MAC: 0030.8596.DE82 Default gateway: 172.16.9.2Destination MAC: 0030.8517.44C4 Default gateway: 172.16.1.1Destination MAC: 0030.8517.44C4 Default gateway: 209.165.202.13016 A network administrator is asked to design a new addressing scheme for a corporate network. There are 60 usersoffice, 40 users in the branch office, 28 users in manufacturing, 12 in the sales office, and 4 users in the rese Which VLSM addressing scheme that uses the 192.168.88.0/24 network will fulfill the requirements while wastin addresses?192.168.88.0/26 main192.168.88.32/26 branch192.168.88.64/26 manufacturing 192.168.88.96/27 sales192.168.88.128/28 research192.168.88.0/26 main192.168.88.64/26 branch192.168.88.128/27 manufacturing192.168.88.160/28 sales192.168.88.176/29 research192.168.88.0/27 main192.168.88.32/27 branch192.168.88.64/28 manufacturing192.168.88.80/29 sales192.168.88.88/30 research192.168.88.0/27 main192.168.88.64/28 branch192.168.88.80/28 manufacturing192.168.88.96/29 sales192.168.88.104/30 research17W hich physical connector type is used for a serial V.35 connection to the CSU/DSU?18Refer to the exhibit. Which two facts can be determined about the topology? (Choose two.)Four collision domains are present.One logical network is represented.Two broadcast domains are present.Three networks are needed.Three logical address ranges are required.19W hat are three characteristics of CSMA/CD? (Choose three.)It monitors the media for presence of a data signal.After detecting a collision, hosts can resume transmission after a random timer has expired.A jam signal is used to ensure that all hosts are aware that a collision has occurred.Devices can be configured with a higher transmission priority.Data is transmitted only when the data signal is present.It uses a token system to avoid collisions.20Refer to the exhibit. The serial interface of the router was configured with the use of the commands that ar router cannot ping the router that is directly connected to interface serial 0/0/0. What should the network t to solve this problem?Configure the description at interface serial 0/0/0.Configure an IP address on interface serial 0/0/0.Remove the no shutdown command at interface serial 0/0/0Reboot the router.21W hich OSI layer uses the header information to reassemble the data segments into streams?application layernetwork layerpresentation layersession layertransport layer22Refer to the exhibit. The NAT functionality of the router is enabled to provide Internet access to the PC. How is still unable to access the Internet. Which IP address should be changed to 209.165.201.1 to enable the PC t Internet?192.168.1.191192.168.1.101192.168.1.1192.168.1.25423Refer to the exhibit. A technician uses the nslookup command on the PC and views the output that is displayed in What is the IP address of the primary domain name server used by the host?10.10.10.32192.168.1.5192.168.1.99192.168.2.10024Which memory contents will change as a result of using the Router# erase startup-config command on a routerRAMROMflashNVRAM25W hile configuring a router, a network technician wants to name the router. Which prompt should the technician see the hostname command?Router>Router#Router(config)#Router(config-line)#26Refer to the exhibit. The PC, the routing table of which is displayed, is configured correctly. To which netwo interface does the IP address 192.168.1.254 belong?PCswitchrouter interface fa0/0router interface fa0/127Refer to the exhibit. A network administrator is troubleshooting a link that is down between Router1 and Router the problem, which wire pairs need to be switched on one of the Ethernet cable ends?pair 1 and pair 2pair 1 and pair 3pair 2 and pair 3pair 2 and pair 428Refer to the exhibit. A PC is connected to a network. Which action will verify that the PC can communicate wit gateway?Use the ping 127.0.0.1 command.Use the ipconfig command.Use the ipconfig/all command.Use the ping 10.0.0.254 command.29Refer to the exhibit. Host B was powered off. What change will occur in the MAC table of the switch?The table will remain unaffected.The switch will remove the MAC address at Fa0/19.The switch will retain the MAC address until host B is powered on again.The switch will rebuild the MAC table by assigning the FFFF.FFFF.FFFF address to port Fa0/19.30What information is contained in the header of Layer 3 to help data delivery?port numberdevice physical addressdestination host logical addressvirtual connection identifier31 A network technician is tasked with setting up a network for six users, but the users should be able to use thto log on from any of the six computers. What type of network should be used?workgroupP2P applicationspeer-to-peer networkclient-server network32Refer to the exhibit. A web browser is running on host PC1 with an IP address 10.10.2.2/24. A dynamic port num is assigned to the browser. The browser sends a request for a web page to the web server with an IP address 192.1 Which statement is true?The session is established using TCP, and the socket number for the web server is 192.168.1.254: 80.The session is established using TCP, and the socket number for the web server is 192.168.1.254: 49152.The session is established using UDP, and the socket number for the web server is 192.168.1.254: 80.The session is established using UDP, and the socket number for the web server is 192.168.1.254: 49152.33Refer to the exhibit. An administrator on PC1 wants to view some HTML code from a web page housed on the web s client application will allow this request to be started?34Refer to the exhibit. What is required on host A for a network technician to create the initial configurationan FTP clienta Telnet clienta terminal emulation programa web browser35What are two characteristics of the data link layer? (Choose two.)It segments and reorders the data.It exchanges the frames between nodes.It defines the method by which network devices place data onto the media.It manages the transfer of data between the processes that run on each host.It retrieves signals from the media and restores them to their bit representations.36A network administrator wants to restrict access to the router privileged EXEC mode. Which password should the a use?enableauxconsoleVTY37Which three IPv4 addresses represent a broadcast for a subnet? (Choose three.)172.16.4.63 /26172.16.4.129 /26172.16.4.191 /26172.16.4.51 /27172.16.4.95 /27172.16.4.221 /2738Refer to the exhibit. Host X is unable to communicate with host Y. Which command can be run at host X to det intermediary device is responsible for this failure?telnet 192.168.1.1ping 192.168.1.1ftp 192.168.1.1tracert 192.168.1.139Refer to the exhibit. Which option shows the correct topology given the configuration of Router1?40I f an administrator wished to return a router to the default state, what additional step must be taken after command erase start-up config?Reload the device.Issue the command copy running-config start-up config.Perform a show running-config to verify that the file was removed.Enter the interface commands to allow the device to connect to the network.41By using the ipconfig command, a network administrator determines that a workstation has the address 192.168.bits set in the subnet mask. To what network does the workstation belong?192.168.3.8192.168.3.16192.168.3.24192.168.3.3242W hich statement is true about router hostnames?A hostname should be unique on each router.A router hostname cannot contain capital letters.A router hostname is configured in privileged executive mode.A router hostname must be created before any other configurations can be added to the device.43 A user types the enable command. What task can be performed at the privileged EXEC mode?Configure the device.Configure individual interfaces.Configure individual terminal lines.Issue show and debug commands.44Refer to the exhibit. Which logical topology describes the exhibited network?starringpoint-to-pointmulti-access45Refer to the exhibit. A user wants to access the Internet from the PC. A part of the running configuration o is shown. Which default gateway IP address should be configured at the PC to enable this access?10.1.192.110.1.192.210.1.192.54192.31.7.146Which statement is true about the ICMP protocol?It is an application layer protocol.It is designed to make IP a reliable protocol.It is often filtered out of networks for security purposes.If a host does not respond to an ICMP echo request, the host is not functioning.47Refer to the exhibit. At which OSI layer is serial interface 0/0/1 experiencing problems?Layer 1Layer 2Layer 3Layer 448Refer to the exhibit. The host was disconnected from switch 2 and connected to switch 1. Which combination of subnet mask, and default gateway should be assigned to this host to allow it to function in the network?IP address: 10.10.9.37 Subnet mask: 255.255.255.240 Default gateway: 10.10.9.35IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35IP address: 10.10.9.29 Subnet mask: 255.255.255.248 Default gateway: 10.10.9.35IP address: 10.10.9.32 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.35IP address: 10.10.9.37 Subnet mask: 255.255.255.224 Default gateway: 196.1.105.6IP address: 10.10.9.63 Subnet mask: 255.255.255.224 Default gateway: 10.10.9.3549Refer to the exhibit. The diagram represents the process of sending email between clients. Select the list below t identifies the component or protocol used at each numbered stage of the diagram.1.MUA2.MDA3.MTA4.SMTP5.MTA6.POP7.MDA8.MUA1.MUA2.POP3.MDA4.SMTP5.MTA6.MDA7.SMTP8.MUA1.MUA2.POP3.SMTP4.MDA5.MTA6.SMTP7.POP8.MUA1.MDA2.SMTP3.MTA4.SMTP5.MTA6.MUA7.POP8.MDA1.MUA2.SMTP3.MTA4.SMTP5.MTA6.MDA7.POP8.MUA50What is the Cisco IOS?system software for Cisco devicesRead Only Memory in Cisco devicesnon-volatile storage for device configurationsan initial operating system that is used for boot functions。