超市智能购物车

超市智能购物车设计

摘要:根据数据统计，无害化方式处理的厨余垃圾，近几年虽然有较大的提升，但是与其他发达国家比较而言，无害化处理率仍然很低。而且目前我国的厨余垃圾大部分是以混合处理的形式进行的，这给城市垃圾处理带来巨大压力。针对这一现象，本课题设计了一款家用厨余处理器。该设计有如下几个要点：科技、便捷、小型、安全。本设计不拘泥于现有厨余处理器的具体形式，而从绿色环保与循环利用的角度出发，提供对厨余垃圾处理的一条新途径，在减少城市生活垃圾处理压力的同时给都市生活更多选择。这并不仅仅是作外观上的美化、文化层面上的创新，更是对未来生活方式做出合理化的预测及指导；其次，本设计适用于家庭与小型餐馆，需要更多考虑的方向是操作的便捷性、外观的优美程度与较小的处理量；另外，本设计特意考虑到取出处理物的问题，设计了配套的播撒机器人；最后，本课题将重点放在造型与操作上，竭力塑造一个可以融入生活的产品而不是生冷的机器。

关键词：厨余处理器；科技；小型；循环利用

Design of kitchen waste processor

Abstract: According to statistics,the harmless treatment of kitchen waste, although in recent years has greatly improved, but compared with other developed countries, harmless treatment rate is still low. And at present our country kitchen waste are mostly in hybrid form, which bring huge pressure to city garbage disposal.In view of this phenomenon,this paper will design a house hold kitchen processor.This product has the following several points: technological,convenient,safe and small.The specific form of this design does not rigidly adhere to the existing kitchen waste processor,and from the green environmental protection and recycling point of view,to provide a new way of kitchen waste treatment,in the reduction of city living garbage disposal pressure at the same time to the urban life more choices.This is not only the innovation of appearance,cultural level,it is to predict and guide the rational for the future way of life;secondly,the design is suitable for families and small restaurants,which need more consideration is the direction of the beautiful degree and small amount of processing convenience,the appearance of operation,and not takes over the pursuit of excess functions and too large volume,avoid because of unreasonable allocation of resources idle and waste;in addition,this product specially consider the matter out processing,;finally,this paper will focus on the design and operation,to create a product that can be integrated into the life rather than a cold machine. Keywords:kitchen waste processor;technology;small;recycling

目录

1 前言 (1)

1.1 研究背景 (1)

1.2 研究的目的和意义 (1)

1.3 研究的现状和主要内容 (1)

2 研究方法和技术路线 (4)

2.1 研究方法 (4)

2.1.1 概念形成 (4)

2.1.2 工程图与三维建模 (4)

2.1.3 模型制作 (5)

2.1.4 后期整理 (5)

2.2 技术路线 (5)

3 设计调研和设计分析 (7)

3.1 设计前期调研分析 (7)

3.1.1厨余处理器的发展历程 (7)

3.1.2厨余处理器的主要结构 (7)

3.1.3市场上现有产品分析 (8)

3.2 调研分析 (10)

3.2.1分析归纳厨余处理器的特点 (10)

3.2.2归纳确定设计方向 (11)

4 设计构思 (14)

4.1设计定位 (14)

4.2设计构思 (16)

4.3构思草图 (17)

5 设计方案和分析 (19)

5.1设计方案 (19)

5.1.1效果图 (19)

5.1.2实物模型 (21)

5.2方案分析 (21)

5.2.1功能分析 (21)

5.2.2造型和材质分析 (22)

5.2.3色彩分析 (22)

5.2.4尺寸说明和依据 (22)

总结与展望 (23)

后记 (24)

参考文献 (25)

附录 (26)

附录一：毕业设计展板 (26)

附录二：CAD图纸 (30)