DELL服务器面板指示灯错误代码
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Miscellaneous - Message Code: x19xx
BIOS Fatal Error Codes - Message Code: x20xx
Special Exceptions - Message Code: x10xx
Cable and Board Presence -Message Code:"x1Axx"
E1A11
PCIRsrConfig
High
PCI risers are not configured correctly; some invalid configurations prevent systempower on.
Failing device is reseated/replaced/repaired.
Message Code
Message String
Message Priority
Message Comments
Minimum Action Required to Remove Message from LCD
Exists in SEL?
System Phase When Event Can Occur?
Yes
Any
E1219
BackplanePwrGd
High
Backplane voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1221
Flex BayPwrGd
High
Flex Bay voltage regulator power good has failed.
Yes
Any
E1116
Temp Memory
High
Memory has exceeded allowable temperature and has been disabled to prevent damage tothe components.
AC Cycle or SEL clear
Yes
Any
BIOS Progress Codes - Message Code: N/A
Temperature - Message Code: x11xx
Fans - Message Code: x13xx
System Memory - Message Code: x21xx
BIOS - Message Code: x17xx
AC Cycle or SEL clear
Yes
Any
E1222
VCACHE #PwrGd
High
VCACHE # voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1223
VRM #PwrGd
High
VRM # voltage regulator has failed.
Voltages -Message Code:"x12xx"
Message Code
Message String
Message Priority
Message Comments
Minimum Action Required to Remove Message from LCD
Exists in SEL?
Yes
Any
E1211
ROMBBatt
Low
PERC5I RAID battery charger has reported to the Server Management that the battery is either missing, can't charge the battery (possibly because of high temperatures), or the battery is bad.
Failing device is reseated/replaced/repaired.
Yes
Any
W1228
ROMBBatt< 24 hr
Low
This is a predictive failure warning message telling the user that the PERC5I RAID battery has less then 24 hours of charge left init. Wee provide this message as a warning message to the customer.
AC Cycle or SEL clear
Yes
Any
E122A
CPU VTTPwrGd
High
Processor VTT voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E122B
0.9 V Over Voltage
High
0.9 V regulator voltage has exceeded the allowable voltage range.
Failing device is reseated/replaced/repaired.
Yes
Any
E1A16
SAS Cable FB
Low
Flex bay SAS cable is missing or bad.
Failing device is reseated/replaced/repaired.
Battery charges to > 24 hours of sustained charge.
Yes
Any
E1214
1.5VPwrGd
High
1.5 VV voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1215
1.8VPwrGd
AC Cycle or SEL clearY源自sAnyE1228
0.9VPwrGd
High
Memory VTT voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1229
CPU # VCORE
High
Processor # VCORE voltage regulator has failed.
Exists in SEL?
System Phase When Event Can Occur?
E1114
Temp Ambient
Med
Ambient temperature has a reached a point outside of the allowed range.
Temperature returns to allowable range.
Yes
Pre-Post
E1A12
PCIRsrMissing
High
One or all of the PCI risers is missing. This prevents system power on.
Failing device is reseated/replaced/repaired.
Yes
System Phase When Event Can Occur?
E1210
CMOSBatt
Low
CMOS battery is missing or the voltage is outside of the allowable range.
Failing device is reseated/replaced/repaired.
Yes
Any
Fans -Message Code:"x13xx"
High
1.8 VV voltage regulator hasfailed.
AC Cycle or SEL clear
Yes
Any
E1216
3.3VPwrGd
High
3.3V voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1217
Cable and Board Presence - Message Code: x1Axx
Voltages - Message Code: x12xx
Processors - Message Code: x14xx
Power Supplies - Message Code: x16xx
Hard Drives - Message Code: x18xx
AC Cycle or SEL clear
Yes
Any
E122C
CPU Power Fault
High
A voltage regulator failure was detected when the processor regulator(s) was enabled.
AC Cycle or SEL clear
Failing device is reseated/replaced/repaired.
Yes
Any
Temperature -Message Code:"x11xx"
Message Code
Message String
Message Priority
Message Comments
Minimum Action Required to Remove Message from LCD
5VPwrGd
High
5V voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1218
PCIRsr5VPwrGd
High
PCI Riser 5V voltage regulator has failed.
AC Cycle or SEL clear
Pre-Post
E1A14
SAS Cable A
Low
SAS cable A is missing or bad.
Failing device is reseated/replaced/repaired.
Yes
Any
E1A15
SAS Cable B
Low
SAS cable B is missing or bad.
AC Cycle or SEL clear
Yes
Any
E1227
LinearPwrGd
High
Linear voltage regulator(s) has failed. Represents status of multiple voltage regulators used in the video and LOM circuitry.
Yes
Any
E1A17
PwrCable FB
Low
Flex bay power cable is missing or bad.
Failing device is reseated/replaced/repaired.
Yes
Any
E1A18
PDBCtrl Cable
High
PDB control cable to the planar is missing or bad and system will not power on.
E1A10
PDBPwrCable
High
PDB power cable to the planar is missing or bad and system will not power on.
Failing device is reseated/replaced/repaired.
Yes
Pre-Post
AC Cycle or SEL clear
Yes
Any
E1225
ESB 1.5VPwrGd
High
ESB1.5 VV voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1226
PCIRsr1.5VPwrGd
High
PCI Riser 1.5 VV voltage regulator has failed.
LCD Messages
The following table provides detail on error messaged that may be displayed on the system LCD.
NOTE:
If the user presses and holds the ID button for approximately 5 seconds, the LCD will enter theBIOS Progress Codestate. This feature is very useful when troubleshooting a no POST or no video situations.
BIOS Fatal Error Codes - Message Code: x20xx
Special Exceptions - Message Code: x10xx
Cable and Board Presence -Message Code:"x1Axx"
E1A11
PCIRsrConfig
High
PCI risers are not configured correctly; some invalid configurations prevent systempower on.
Failing device is reseated/replaced/repaired.
Message Code
Message String
Message Priority
Message Comments
Minimum Action Required to Remove Message from LCD
Exists in SEL?
System Phase When Event Can Occur?
Yes
Any
E1219
BackplanePwrGd
High
Backplane voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1221
Flex BayPwrGd
High
Flex Bay voltage regulator power good has failed.
Yes
Any
E1116
Temp Memory
High
Memory has exceeded allowable temperature and has been disabled to prevent damage tothe components.
AC Cycle or SEL clear
Yes
Any
BIOS Progress Codes - Message Code: N/A
Temperature - Message Code: x11xx
Fans - Message Code: x13xx
System Memory - Message Code: x21xx
BIOS - Message Code: x17xx
AC Cycle or SEL clear
Yes
Any
E1222
VCACHE #PwrGd
High
VCACHE # voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1223
VRM #PwrGd
High
VRM # voltage regulator has failed.
Voltages -Message Code:"x12xx"
Message Code
Message String
Message Priority
Message Comments
Minimum Action Required to Remove Message from LCD
Exists in SEL?
Yes
Any
E1211
ROMBBatt
Low
PERC5I RAID battery charger has reported to the Server Management that the battery is either missing, can't charge the battery (possibly because of high temperatures), or the battery is bad.
Failing device is reseated/replaced/repaired.
Yes
Any
W1228
ROMBBatt< 24 hr
Low
This is a predictive failure warning message telling the user that the PERC5I RAID battery has less then 24 hours of charge left init. Wee provide this message as a warning message to the customer.
AC Cycle or SEL clear
Yes
Any
E122A
CPU VTTPwrGd
High
Processor VTT voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E122B
0.9 V Over Voltage
High
0.9 V regulator voltage has exceeded the allowable voltage range.
Failing device is reseated/replaced/repaired.
Yes
Any
E1A16
SAS Cable FB
Low
Flex bay SAS cable is missing or bad.
Failing device is reseated/replaced/repaired.
Battery charges to > 24 hours of sustained charge.
Yes
Any
E1214
1.5VPwrGd
High
1.5 VV voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1215
1.8VPwrGd
AC Cycle or SEL clearY源自sAnyE1228
0.9VPwrGd
High
Memory VTT voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1229
CPU # VCORE
High
Processor # VCORE voltage regulator has failed.
Exists in SEL?
System Phase When Event Can Occur?
E1114
Temp Ambient
Med
Ambient temperature has a reached a point outside of the allowed range.
Temperature returns to allowable range.
Yes
Pre-Post
E1A12
PCIRsrMissing
High
One or all of the PCI risers is missing. This prevents system power on.
Failing device is reseated/replaced/repaired.
Yes
System Phase When Event Can Occur?
E1210
CMOSBatt
Low
CMOS battery is missing or the voltage is outside of the allowable range.
Failing device is reseated/replaced/repaired.
Yes
Any
Fans -Message Code:"x13xx"
High
1.8 VV voltage regulator hasfailed.
AC Cycle or SEL clear
Yes
Any
E1216
3.3VPwrGd
High
3.3V voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1217
Cable and Board Presence - Message Code: x1Axx
Voltages - Message Code: x12xx
Processors - Message Code: x14xx
Power Supplies - Message Code: x16xx
Hard Drives - Message Code: x18xx
AC Cycle or SEL clear
Yes
Any
E122C
CPU Power Fault
High
A voltage regulator failure was detected when the processor regulator(s) was enabled.
AC Cycle or SEL clear
Failing device is reseated/replaced/repaired.
Yes
Any
Temperature -Message Code:"x11xx"
Message Code
Message String
Message Priority
Message Comments
Minimum Action Required to Remove Message from LCD
5VPwrGd
High
5V voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1218
PCIRsr5VPwrGd
High
PCI Riser 5V voltage regulator has failed.
AC Cycle or SEL clear
Pre-Post
E1A14
SAS Cable A
Low
SAS cable A is missing or bad.
Failing device is reseated/replaced/repaired.
Yes
Any
E1A15
SAS Cable B
Low
SAS cable B is missing or bad.
AC Cycle or SEL clear
Yes
Any
E1227
LinearPwrGd
High
Linear voltage regulator(s) has failed. Represents status of multiple voltage regulators used in the video and LOM circuitry.
Yes
Any
E1A17
PwrCable FB
Low
Flex bay power cable is missing or bad.
Failing device is reseated/replaced/repaired.
Yes
Any
E1A18
PDBCtrl Cable
High
PDB control cable to the planar is missing or bad and system will not power on.
E1A10
PDBPwrCable
High
PDB power cable to the planar is missing or bad and system will not power on.
Failing device is reseated/replaced/repaired.
Yes
Pre-Post
AC Cycle or SEL clear
Yes
Any
E1225
ESB 1.5VPwrGd
High
ESB1.5 VV voltage regulator has failed.
AC Cycle or SEL clear
Yes
Any
E1226
PCIRsr1.5VPwrGd
High
PCI Riser 1.5 VV voltage regulator has failed.
LCD Messages
The following table provides detail on error messaged that may be displayed on the system LCD.
NOTE:
If the user presses and holds the ID button for approximately 5 seconds, the LCD will enter theBIOS Progress Codestate. This feature is very useful when troubleshooting a no POST or no video situations.