轴承座加工工艺及加工下底面夹具设计毕业设计论文

轴承座加工工艺及加工下底面夹具设计毕业设计论文安徽工程大学机电学院毕业设计(论文)

- 1 -

安徽工程大学机电学院毕业设计(论文)

轴承座加工工艺及加工下底面夹具设计

摘要

本课题设计的意义是通过―轴承座加工工艺及加工下底面夹具设计‖这一设计工作，了解并掌握工艺规程的编制及夹具的设计，以便在将来的工作中正确的使用。完成的主要工作时:工件工艺性能分析、毛坯和图的绘制、工艺规程中加工路线的拟定及确定、工件在加工过程中所使用的工艺装备、各工序间机械加工余量的确定、工艺卡和工序过程卡的填写、定位方案的设计、定位元件的选用及设计、夹紧机构的设计、夹紧力定位误差的分析与计算、夹具装配图及非标准定位元件的零件图绘制。

本课题通过查阅资料对零件进行分析并计算，然后选取一种最适合的加工方案进行加工。并通过使用CAD软件进行图纸的绘制，在绘制的过程中全方面了解零件的功能作用，并进行夹具的设计。

本次夹具设计属于在众多的夹具设计中属于普遍的夹具形式，但其中也有一些不足，但夹具的结构类型比较简单，一些定位原件大部分都是标准间，易于生产，一些非标准的零件也都进行了设计并进行CAD绘图。

关键词: 毛坯;机械加工余量;工艺路线;定位元件;夹紧机构

- I -

张海政:轴承座加工工艺及加工下底面夹具设计

Bearing Processing Technique and the Bottom Surface of the Fixture

Design

Abstract

This topic design through which meaning is bearing the processing technique and the bottom surface of the fixture design of the design work,，to understand and grasp the process

procedure and fixture design,，so that in the future work of the correct use of。To complete the

main work， work process performance analysis,，rough and drawing，process specification

process route plan is determined,，and the workpiece in the process by the use of the process equipment， the process of determining the allowance for machining，process cards and

process card filling in a positioning scheme design，positioning element selection and design

of mechanism design clamping clamping force analysis and calculation of positioning error，

jig assembly drawing and non standard positioning component parts drawing。

This topic through consulting data carries on the analysis to the components and calculation, and then select a suitable processing program for processing. And by using CAD software for drawing, in drawing process in all aspects of understanding the parts of the function, and the jig design。

The jig design is in a large number of fixture design belongs to the universal fixture forms, but also has some shortcomings, but the structure of clamp type is relatively simple, with some positioning original mostly standard room, easy production, some non-standard parts were designed and the CAD drawing。

Key words: blank,machining allowances,process route, the positioning element,the clamping mechanism

- II -

安徽工程大学机电学院毕业设计(论文)

目录

引

言 ..................................................................... . (1)

第1章绪

论 ..................................................................... . (2)

1.1 课题研究的意

义 ..................................................................... . (2)

1.2 机械装备及其发

展 ..................................................................... (2)