群创奇美15寸液晶屏G150XNE-L03 ver 0杭州旭虹科技有限公司
KOYO ELECTRONICS INDUSTRIES CO., LTD. GC7系列可编程触摸面板
352Visit our websitehttp://www.koyoele.co.jp/english/KOYO ELECTRONICS INDUSTRIES CO., LTD.GENERAL CATALOG 2014Latest catalog (free) is available online.Visual ScopeGC7FeaturesProgrammable Touch Panel (GC Type)Inherited the GC-5 display.- 10.4-inch TFT color Model number: GC-76LC - 5.7-inch STN color Model number: GC-73LCL-R- 5.7-inch STN monochrome Model number: GC-73LM-RFeatures- Shifted from the GC50 series.The applications of the GC-50 series (GC-53LC3, GC-53LM3, and sGC-56LC2) are partially inherited.The applications can be replaced within restrictions.Restrictions from the GC50 Series1. Drawing softwarePrepare ScreenCreator5 Ver3.0 or later.You can download the drawing software from Koyo Electronics' websitefree of charge.2. Panel cutout dimensionsThe panel cutout dimensions are not changed.The display can be installed in the existing holes for attaching the controlpanel as is.3. DimensionsThe 5.7-inch type is 7.1 mm thicker in depth. The 0.4-inch type is 3.0 mm wider in width.Since the location and size of mounting brackets and external connectionconnectors are different, make sure that there are no interfering parts inside and outside the board.4. Power SupplyThe 5.7-inch type is connected to the main body, not by terminal blockbut by connector (bundled item). The 10.4-inch type has been changed to 24 V DC speci cation.If you use the GC7 at 100 V/200 V AC, use the optional EA-AC orprepare a commercial AC/DC power supply. (If the EA-AC is used, the depth of the product becomes the main body + 36.1 mm.)5. Con firmation of PLC modelsPLCs that can be used are largely limited. Also, the shapes of connectionconnectors are different. (M:N communications also cannot be used.)6. Con firmation of peripheral devicesThe GC70 series has only one serial port.Also note that there are no parallel ports or RAS output / reset input.- ScreenCreator5 is usable.The ScreenCreator5 drawing software has been upgraded. You can draw in the same way as with the GC-50 series.7. Touch panel operationSince an analog-type touch panel is used, there are the following restrictions.- You cannot press two, three, or four points at the same time. - The resolution of the touch panel is different.Since the GC50 series has a different resolution (16 x 12 or 32 x 24) from the GC70 series (1,024 x 1,024), the operational feeling may be different.8. When K-BASIC is usedThere are restrictions on usable instruction words.9. When option products are usedThe digital I/O cannot be used.The backup data in a CF card is not compatible. If the data is backed up by a CF card for the GC50 series, restore the screen data to ScreenCreator5 once. Each setting data needs to be reset for the GC70 series.10.How to download screen dataScreen data can be transferred via USB.11.OtherThere may be restrictions in addition to the items mentioned above.Viewing angle of the screen, appearance of reduced / enlarged characters, appearance of the black-and-white type (difference between blue type LCD and black-and-white mode), etc.* When you change models, it is recommended that you check the operations using actual equipment once.353KOYO ELECTRONICS INDUSTRIES CO., LTD.GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.Visual Scope GC7SpecificationsHow to Transfer SoftwareRead the screen data project using ScreenCreator5 (Ver3.0 or later).Change the target panel to the new model (GC-73LM-R / GC-73LCL-R / GC-76LC) using ScreenCreator5 (Ver3.0 or later).Recompile the screen data using ScreenCreator5 (Ver3.0 or later).Download the compilation data to the new model using ScreenCreator5 (Ver3.0 or later).* In a new model, it is not necessary to change to the download mode at hardware side like previous models.If the computer and the display are connected via a USB cable and the data is downloaded from a computer, the display automatically changes to the download mode and automatically restarts after the completion of the download.Each Part Names and Descriptions1 Power supply (24 V DC) Can be used for the power supply in the same conditions as GC-53L 3.2 CF card slotThe screen data can be uploaded/downloaded from a CF card.3 AC power supply module (Option) Can be used with a power supply under the same conditions as the GC-56LC2.4 Various LEDs You can check the power supply / status / transmission and reception.5 Battery Retain clock data / SRAM.6 Serial port For connection to a PLC7 USB A port The screen data can be uploaded/downloaded from a USB memory. 8 USB B port The screen data can be uploaded/downloaded from drawing software.Cable length: 3 mNot in Use4 Various LEDs3 AC Power Supply Module (Option)7 USB A Port8 USB B Port5 Battery6 Serial Port2 CF Card Slot 1StandardExpansion (Option is installed)354Visit our websitehttp://www.koyoele.co.jp/english/KOYO ELECTRONICS INDUSTRIES CO., LTD.GENERAL CATALOG 2014Latest catalog (free) is available online.Visual Scope GC7Specifications*1 Since this display uses a cold-cathode tube for the backlight, the brightness widely uctuates according to the conditions shown below. Consider the described brightness as a target. Ambient temperature, installation angle of the product, elapsed time since power-on, duration of use of the product, and number of product power supply ON/OFF cycles *2 Only the speci c card can be used.* Regarding the EA-AC speci cations, see P.349.355KOYO ELECTRONICS INDUSTRIES CO., LTD.GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.Visual Scope GC7SpecificationsSupported PLCs as of May 2012Largely restricted compared with the GC50 series.If devices other than those above are connected, it is impossible to shift to the GC70 series.356Visit our websitehttp://www.koyoele.co.jp/english/KOYO ELECTRONICS INDUSTRIES CO., LTD.GENERAL CATALOG 2014Latest catalog (free) is available online.Visual ScopeHole12.1inch15.0inch357KOYO ELECTRONICS INDUSTRIES CO., LTD.GENERAL CATALOG 2014The specifications and prices described in this catalog were valid when the catalog was issued.For the latest information, contact our sales persons or see our website.Visual Scope GC7Correlation。
友达5.7寸液晶屏G057VTN01 V0规格书-杭州旭虹科技有限公司
G057VTN01 V0 Color TFT-LCD Module5.7” VGA Landscape LED BacklightWide Temperature Range Mercury-free solution RoHS and Halogen-freeComplianceHigh Shock/Vibration Resistance Outline and Interface are fullycompatible with G057VN01 serials(Preliminary)Size (inch)5.7” ModelG057VN01 V210 Resolution (pixel) 640(RGB) x 480 Active Area (mm) 115.2(H) x 86.4(V)Pixel Pitch (mm) 0.18 x 0.18Mode TNLCD Surface Anti-Glare, Hardness 3HNumber of Colors 262K View Angle (L/R/U/D) 80/80/70/70 (typ.) Brightness(nit) (25℃) 500(min.), 600 (typ.)Contrast Ratio (25℃) 800:1 (typ.) Response Time (ms) 25 (typ.) LED Life (hrs.)50K Power Consumption (W) 3.74W Supply Voltage (V) 3.3V Storage Temp. (℃) -30 ~ 85 Operation Temp. (℃) -30 ~ 85Outline Dimension (mm) 144.0(H) x 104.6(V) x12.3(D) (typ.) Weight (g) 150g (typ.), 165g (max.)InterfaceCMOSTFT- LCD Interface Signal Description:Note 1: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for ”No Connection”.TFT- LCD Signal (CN1): LCD Connector: ManufacturerStarconnConnector Model Number 089H33-000100-G2-R, compatible withIMSA-9637S-33Y902 & ELCO 08-6210--033-340-800+Pin# Symbol Pin# Symbol Pin# Symbol 1 GND 12 GND 23 B3 2 DOTCLK 13 G0 24 B4 3 NC 14 G1 25 B5 4 NC 15 G2 26 GND 5 GND 16 G3 27 DE 6 R0 17 G4 28 VDD 7 R1 18 G5 29 VDD 8 R2 19 GND 30 R/L 9 R3 20 B0 31 U/D 10 R4 21 B1 32 NC 11 R522B233GNDLED Backlight Unit (CN2): Backlight Connector:ManufacturerJSTConnector Model Number SM06B-SRKS-G-TBcompatible with JST SM06B-SRSS-TB (LS) (SN)Mating Connecter Model Number JST SHR-06V-BKHF-B or compatiblePin # Symbol Pin # Symbol 1 V LED 4 GND 2 V LED 5 PWM DIM 3GND6LED ON/OFFLED Light Bar Input (CN3): Light Bar Connector ManufacturerSTM or compatible Connector Model Number P24021P6 or compatible Mating Connecter Model NumberSM06B-SHLS-TF or compatiblePin # Symbol Pin Description Cable color1 AN1 Channel 1 LED anode Red2 AN2 Channel 2 LED anode Red3 AN3 Channel 3 LED anode Red4 CA1 Channel 1 LED cathode White5 CA2 Channel 2 LED cathode Blue6 CA3Channel 3 LED cathodeBlack工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍReliability Test Criteria: ItemsRequired Condition Remark Temperature Humidity Bias40℃/90%,300HrNote 2 High Temperature Operation 85℃,300Hr Note 2 Low Temperature Operation -30℃,300Hr Note 2 High Temperature Storage 85℃,300 hours Note 2 Low Temperature Storage -30℃,300 hoursNote 2 Thermal Shock Test -20℃/30 min ,60℃/30 min ,100cyclesNote 2 Hot Start Test 85℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Cold Start Test -30℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Shock Test (Non-Operating) 50G, 20ms,Half-sine wave, (±X, ±Y , ±Z)Note 2Vibration Test (Non-Operating)(1)Random Wave 3.3rms, 0.5hr(X,Y,Z), 5~500hz (2)Sine Wave 6.8G, 10~400hz, 4hr40min (XYZ)Note 2ESDContact Discharge: ±8KV, 150pF(330Ω) 1sec, 8 points, 25times/pointAir Discharge: ±15KV, 150pF(330Ω) 1sec, 8 points, 25 times/pointNote 1,2Attitude TestOperating: 14,000 ft, Ramp: 2000 ft/min, 8hrs Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrsNote 2Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module is self-recoverable, no data lost and no hardware failures after test. Note2:Water condensation is not allowed for each test items.Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test.The reliability test is performed only to examine the TFT-LCD module capability.To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance.工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍVersion 0.2, Mar 2012Mechanical Characteristics:工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ。
友达15寸液晶屏G150XAN01.0规格书-杭州旭虹科技
(V) Preliminary Specifications() Final SpecificationsModule15 Inch Color TFT-LCD Model Name G150XAN01.0Customer Date Checked &Approved by Approved by Date Sean Lin 2017/12/15 Prepared byJason Hsieh 2017/12/15 General Display Business Unit / AU Optronics corporationContents1. Operating Precautions (4)2. General Description (5)2.1 Display Characteristics (5)2.2 Optical Characteristics (6)3. Functional Block Diagram (9)4. Absolute Maximum Ratings (10)4.1 Absolute Ratings of TFT LCD Module (10)4.2 Absolute Ratings of Environment (10)5.1 TFT LCD Module (11)5.2 Backlight Unit (13)6. Signal Characteristic (14)6.1 Pixel Format Image (14)6.2 Scanning Direction (14)6.3 Signal Description (15)6.4 The Input Data Format (16)6.5 Interface Timing (17)6.6 Power ON/OFF Sequence (18)7. Connector & Pin Assignment (19)7.1 TFT LCD Module: LVDS Connector (19)7.2 LED Backlight Unit: LED Driver Connector (20)7.2 LED Backlight Unit: LED Driver Connector (21)7.3 LED Driver Connector Pin Assignment (21)8. Reliability Test Criteria (22)9. Mechanical Characteristics (23)9.1 LCM Outline Dimension (Front View) (23)9.2 CM Outline Dimension (Rear View) (24)10. Label and Packaging (25)10.1 Shipping Label (on the rear side of TFT-LCD display) (25)10.2 Carton Package (25)10.3 Palletizing (26)11 Safety (27)11.1 Sharp Edge Requirements (27)11.2 Materials (27)11.3 Capacitors (27)11.4 National Test Lab Requirement (27)Record of RevisionVersion and Date Page Old description New Description0.0 2017/12/15All First Edition1. Operating Precautions1)Since front polarizer is easily damaged, please be cautious and not to scratch it.2)Be sure to turn off power supply when inserting or disconnecting from input connector.3)Wipe off water drop immediately. Long contact with water may cause discoloration orspots.4)When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.5)Since the panel is made of glass, it may be broken or cracked if dropped or bumped onhard surface.6)Since CMOS LSI is used in this module, take care of static electricity and insure humanearth when handling.7)Do not open nor modify the module assembly.8)Do not press the reflector sheet at the back of the module to any direction.9)In case if a module has to be put back into the packing container slot after it was takenout from the container, do not press the center of the LED Reflector edge. Instead, press at the far ends of the LED Reflector edge softly. Otherwise the TFT Module may be damaged.10)At the insertion or removal of the Signal Interface Connector, be sure not to rotate nortilt the Interface Connector of the TFT Module.11)TFT-LCD Module is not allowed to be twisted & bent even force is added on module ina very short time. Please design your display product well to avoid external forceapplying to module by end-user directly.12)Small amount of materials without flammability grade are used in the TFT-LCD module.The TFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950-1 or UL60950-1), or be applied exemption.13)Severe temperature condition may result in different luminance, response time.14)Continuous operating TFT-LCD Module under high temperature environment mayaccelerate LED light bar exhaustion and reduce luminance dramatically.15)The data on this specification sheet is applicable when TFT-LCD module is placed inlandscape position.16)Continuous displaying fixed pattern may induce image sticking. It’s recommended touse screen saver or moving content periodically if fixed pattern is displayed on the screen.2. General DescriptionG150XAN01.0is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x 768(V)) screen and 16.2M (RGB 6+2FRC)colors. All input signals are LVDS interface compatible.G150XAN01.0 is designed for industrial display applications.2.1 Display CharacteristicsThe following items are characteristics summary on the table under 25 ℃ condition:Items Unit SpecificationsScreen Diagonal[inch]15Active Area[mm]304.128(H) x 228.096(V)Pixels H x V1024x3(RGB) x 768Pixel Pitch[mm]0.297 x 0.297Pixel Arrangement R.G.B. Vertical StripeDisplay Mode AHVANominal Input Voltage VDD[Volt] 3.3 typ.Typical Power Consumption[Watt]7.5 WWeight[Grams]920g(max.)Physical Size[mm]326.5(H)x 253.5(V) x 9.0 (D)Electrical Interface LVDSSurface Treatment Anti-glare, Hardness 3HSupport Color16.2M colorsTemperature RangeOperatingStorage (Non-Operating)[o C][o C]-20 to +70 (+70o C as panel surfacetemperature)-20 to +65RoHS Compliance RoHS Compliance Light Bar Unit LED, Non-Replaceable2.2 Optical CharacteristicsThe optical characteristics are measured under stable conditions at 25℃ (Room Temperature):Item Unit Conditions Min.Typ.Max.Note White Luminance [cd/m2]280350-1Uniformity %9 Points7580-1, 2, 3Contrast Ratio 4001000-4Cross talk%--- 1.55[msec]Rising -[msec]Falling-Response Time[msec]Raising + Falling -25306[degree][degree]Horizontal (Right)CR = 10 (Left)80808989--Viewing Angle[degree][degree]Vertical (Upper)CR = 10 (Lower)80808989--7Red x 0.5690.6190.669Red y 0.3020.3520.402Green x0.2790.3290.379Green y 0.5590.6090.659Blue x 0.1000.1500.200Blue y 0.0680.1180.168White x 0.2630.3130.363Color / Chromaticity Coordinates (CIE 1931)White y0.2790.3290.379Color Gamut%60-Note 1: Measurement methodEquipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)Aperture1with 50cm viewing distance∘Test Point Center Environment < 1 luxLCD ModuleSR_3 or equivalentMeasuring distanceModule Driving EquipmentNote 2: Definition of 9 points position (Display active area: 304.128(H) x 228.096(V))Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test point luminanceNote 4： Definition of contrast ratio (CR):Note 5： Definition of cross talk (CT)CT = | YB – YA | / YA × 100 (%)WhereYA = Luminance of measured location without gray level 0 pattern (cd/m2)YB = Luminance of measured location with gray level 0 pattern (cd/m2)Minimum Brightness of nine pointsδW9 =Maximum Brightness of nine pointsContrast ratio (CR)=Brightness on the “White” state Brightness on the “Black” state50 %90 %90 %50 %10 %10 %1/21/21/61/6A B1/21/21/61/62/31/31/32/3A’B’184 gray levelNote 6: Definition of response time:The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and 90% of amplitudes. Please refer to the figure as below.Note 7: Definition of viewing angleViewing angle is the measurement of contrast ratio 10,at the screen center,over a 180°horizontal and 180°≧vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desired measurementviewing angle.3. Functional Block DiagramThe following diagram shows the functional block of the 15 inch color TFT/LCD module:MSB240420HD Entery 3808K-F05N-12R Mating Type : P240420 H208K-P05N-02BLED BLConnectorLVDS ReceiverTiming ControllerLED driverDC POWERMStar ASICMini-LVDSLVDS+ 3.3VTFT-LCD 1024(3)*768PixelsY-Driver ICG1G768D1D3072Source Driver ICDC/DC Converter Gamma Correction4. Absolute Maximum Ratings4.1 Absolute Ratings of TFT LCD ModuleItem Symbol Min Max UnitLogic/LCD Drive Voltage Vin-0.3+3.6[Volt]4.2 Absolute Ratings of EnvironmentItem Symbol Min Max UnitOperating Temperature TOP-20+70*[o C]Operation Humidity HOP890[%RH]Storage Temperature TST-20+70[o C]Storage Humidity HST890[%RH]℃Note: Maximum Wet-Bulb should be39and no condensation.* 70o C is panel surface temperatureT=40︒C, H=90%T=65︒C, H=27.9%5. Electrical Characteristics 5.1 TFT LCD Module5.1.1 Power SpecificationSymbolParameter Min Typ Max Units RemarkVDD Logic/LCD Drive Voltage 3.0 3.3 3.6[Volt]±10%IDD VDD Current -0.420.51[A]All White Pattern (VDD=3.3V, at 60Hz)I rush LCD Inrush Current 3[A]Note 1PDDVDD Power- 1.391.68[Watt]All White Pattern (VDD=3.3V, at 60Hz)Note 1: Measurement condition:Q3AO6402GD 2SD 1D 5D 6Q3AO6402G D2SD1D5D6C11uF/16VC21uF/25VC30.01uF/25VF1VR147K+12.0VVCCSW1SW MAG-SPST12(High to Low)Control Signal(LCD Module Input)R21K+3.3VR147KR21K90%10%VDD rising time0V3.3V500 usVDD 64 Gray pattern5.1.2 Signal Electrical CharacteristicsInput signals shall be low or Hi-Z state when VDD is off.Note: LVDS Signal Waveform.Symbol ItemMin.Typ.Max.Unit RemarkVTH Differential Input High Threshold --100[mV]VCM=1.2V VTL Differential Input Low Threshold -100--[mV]VCM=1.2V ｜VID ｜Input Differential Voltage 100600[mV]VICMDifferential Input Common Mode Voltage1.01.2 1.5[V]VTH/VTL=±100mV5.2 Backlight Unit5.2.1 Parameter guideline for LEDFollowing characteristics are measured under stable condition using a LED driving board at25(Room℃Temperature).Symbol Parameter Min.Typ.Max.Unit RemarkVcc Input Voltage10.81213.2VoltIvcc Input Current-0.490.54A100% DimmingP LED Power Consumption- 5.9 6.48Watt100% DimmingIrush Inrush Current2AOn Control Voltage 2.5 3.3 5.5VoltV LED on/offOff Control Voltage0.5VoltPWM Dimming20010k HzFrequencyF PWMHigh Voltage 2.5 3.3 5.5VoltLow Voltage0.5VoltDimming Duty Cycle5-100%I F LED Forward Current60mA Ta= 25o COperating Life50,000Hrs Ta = 25o CNote 1: Ta means ambient temperature of TFT-LCD module.Note 2: If G150XAN01.0 module is driven at high ambient temperature & humidity condition.The operating life will be reduced.Note 3: Definition of life time: LED brightness becomes 50% of its original value. The minimum life time of LED unit is defined at the condition of IR LED = 60 mA and 25±2℃(Room temperature).6. Signal Characteristic6.1 Pixel Format ImageFollowing figure shows the relationship between input signal and LCD pixel format.6.2 Scanning DirectionThe following figures show the image seen from the front view. The arrow indicates the direction of scan.6.3 Signal DescriptionLVDS is a differential signal technology for LCD interface and high speed data transfer device.MSB240420E(STM)Pin No.Symbol Description1VDD Power Supply, 3.3V (typical)2VDD Power Supply, 3.3V (typical)3NC No Connect4NC No Connect5Rin1-- LVDS differential data input (R0-R5, G0)6Rin1++ LVDS differential data input (R0-R5, G0)7VSS Ground8Rin2-- LVDS differential data input (G1-G5, B0-B1)9Rin2++ LVDS differential data input (G1-G5, B0-B1)10VSS Ground11Rin3-- LVDS differential data input (B2-B5, HS, VS, DE)12Rin3++ LVDS differential data input (B2-B5, HS, VS, DE)13VSS Ground14ClkIN-- LVDS differential clock input15ClkIN++ LVDS differential clock input16GND Ground17Rin4-- LVDS differential data input (R6-R7, G6-G7,B6-B7)18Rin4+- LVDS differential data input (R6-R7, G6-G7,B6-B7)19VSS Ground20VSS GroundNote 1: Input signals shall be in low status when VDD is off.6.4 The Input Data FormatNote1: Please follow PSWG.Note2:R/G/B data 7:MSB, R/G/B data 0:LSBSignal Name Description RemarkR7 R6 R5 R4 R3 R2 R1 R0Red Data 7Red Data 6Red Data 5Red Data 4Red Data 3Red Data 2Red Data 1Red Data 0Red-pixel DataFor 8Bits LVDS inputMSB: R7 ; LSB: R0G7 G6 G5 G4 G3 G2 G1 G0Green Data 7Green Data 6Green Data 5Green Data 4Green Data 3Green Data 2Green Data 1Green Data 0Green-pixel DataFor 8Bits LVDS inputMSB: G7 ; LSB: G0B7 B6 B5 B4 B3 B2 B1 B0Blue Data 7Blue Data 6Blue Data 5Blue Data 4Blue Data 3Blue Data 2Blue Data 1Blue Data 0Blue-pixel DataFor 8Bits LVDS inputMSB: B7 ; LSB: B0RxCLKIN LVDS Data ClockDE Data Enable Signal When the signal is high, the pixel datashall be valid to be displayed.Note: Output signals from any system shall be low or Hi-Z state when VDD is off.6.5 Interface Timing6.5.1 Timing CharacteristicsSignal Parameter Symbol Min.Typ.Max.Unit Clock Timing Clock frequency 1/ T Clock506581MHzPeriod T V 783806968Active T VD 768768768Vsync TimingVertical SectionBlankingT VB 1538200T Line Period T H 122413442024Active T HD 102410241024Hsync TimingHorizontal SectionBlankingT HB 2003201000T Clock Frame RateF60Hz Note: The maximum Frame Rate < 81MHz / [(V_Period)*(H_Period)]Note: Support DE mode only.Note : Typical value refer to VESA STANDARD6.5.2 Input Timing DiagramDOTCLKDET HT HBT HDDET VDInput Timing Definition ( DE Mode)T CLOCKInput Data Invaild Data Invaild Data6.6 Power ON/OFF SequenceVDD power and backlight on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off.Power Sequence TimingValueParameterMin.Typ.Max.UnitT10.5-10[ms]T2304050[ms]T3200--[ms]T40.5-10[ms]T510--[ms]T610--[ms]T70--[ms]T810--[ms]T9--200[ms]T10110--[ms]T1101650[ms]T12--200[ms]T131000--[ms]The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.901090101090909090101010T1T2T3T4T5T6T7T10T8T9T11T12T13VDDSignalVLEDBack light dimmingBack light101090907. Connector & Pin AssignmentPhysical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.7.1 TFT LCD Module: LVDS ConnectorConnector Name / Designation Signal ConnectorManufacturer STM or compatibleConnector Model Number MSB240420HD or compatibleAdaptable Plug P240420or compatiblePin#Signal Name Pin#Signal Name1VDD2VDD3NC4NC5Rin1-6Rin1+7VSS8Rin2-9Rin2+10VSS11Rin3-12Rin3+13VSS14ClkIN-15ClkIN+16GND17Rin4-18Rin4+19VSS20VSS7.1.1Connector Illustration7.2 LED Backlight Unit: LED Driver ConnectorConnector Name / Designation LED ConnectorManufacturer Entery or compatibleConnector Model Number3808K-F05N-12R or compatible Mating Model Number H208K-P05N-02B or compatible7.3 LED Driver Connector Pin AssignmentPin#Symbol Signal Name1Vcc12V2GND GND3Enable V LED On/Off4Dimming PWM Dimming5NC NC8. Reliability Test CriteriaItems Required Condition Note TemperatureHumidity Bias50/℃80%,300 hoursHigh TemperatureOperation70,300℃ hoursLow TemperatureOperation-20,300℃ hoursHot Storage70,300hours℃Cold Storage-20,300hours℃Thermal ShockTest-20/30min,60/30min,100cycles℃℃Shock Test(Non-Operating)50G,20ms,Half-sine wave,( ±X, ±Y, ±Z)Vibration Test (Non-Operating)1.5G, (10~200Hz, P-P) 30mins/axis (X, Y, Z)On/off test On/10 sec, Off/10 sec, 30,000 cyclesESD Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointAir Discharge: ± 15K V, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointNote 1Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lostSelf-recoverable. No hardware failures.Note 2:●Water condensation is not allowed for each test items.●Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test.●The reliability test is performed only to examine the TFT-LCD module capability.●To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance.●No function failure occurs. Mura shall be ignored after high temperature reliability test.10. Label and Packaging10.1 Shipping Label(on the rear side of TFT-LCD display)10.2 Carton PackageTBDTBD11 Safety11.1 Sharp Edge RequirementsThere will be no sharp edges or comers on the display assembly that could cause injury.11.2 Materials11.2.1 ToxicityThere will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist.11.2.2 FlammabilityAll components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process.The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board.11.3 CapacitorsIf any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards.11.4 National Test Lab RequirementThe display module will satisfy all requirements for compliance to:UL 60950-1, Second Edition U.S.A. Information Technology Equipment。
1.5寸RGB OLED 模块用户手册说明书
1.5inch RGB OLED Module用户手册产品概述本产品是1.5寸彩色OLED显示屏，分辨率为128*128，带有内部控制器，支持4-wireSPI和3-wire SPI进行控制。
产品特性驱动芯片: SSD1351支持接口: 4-wire SPI、3-wire SPI分辨率: 128 * 128显示尺寸: 1.5inch显示颜色: 65K彩色工作电压: 3.3V / 5V管脚配置功能引脚描述VCC 电源正GND 电源地DIN 数据输入CLK 时钟输入CS 片选信号DC 数据/命令信号选择RST 复位信号本OLED模块提供两种通信方式：4-wire SPI和3wire-SPI，在模块的背面有一个可选择焊接的电阻，通过该电阻来选择通信方式。
如下图：模块出厂默认使用4线SPI通信，即BS0默认接0注：下表为接口连接。
BS CS D/C DIN CLK4-wire SPI 0 片选D/C MOSI SCK3-wire SPI 1 片选需接地MOSI SCL具体硬件配置，如下：使用4线SPI:即出厂设置,BS接0连接到GND，DIN接控制引脚MOSI, CLK接控制引脚SCK; 使用3线SPI: BS接1连接到VCC，D/C需接地，DIN接控制引脚MOSI, CLK接控制引脚SCK;SSD1351是一款128RGB * 128 Dot Mattrix OLED/PLED 控制器，其内部有一个128*128*18bit的SRAM作为显示缓存区，支持262k和65k两种颜色深度。
并支持8bit 8080并行、8bit 6800并行、3wire-SPI和4wire-SPI等通信方式。
本模块选择了4wire-SPI和3wire-SPI作为通信方式，减小模块的面积，同时节省了控制器的IO资源。
4WIRE-SPI通信协议在4wire-SPI通信中，先将DC置1或置0，再发送一个或多个字节的数据。
当DC置1时，发送的字节将作为显示数据存入SSD1351的SRAM中，作为显示数据。
NEC Display Solutions 大屏LCD多功能显示器说明书
MultiSync, NaViSet, TileMatrix and Frame Comp are trademarks or registered trademarks of NEC Display Solutions, Ltd. in Japan, the United States and other countries.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.DisplayPort and DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries.HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron Electronics, Inc.AMX is a trademark or registered trademark of AMX in the United States and other countries.Trademark PJLink is a trademark applied for trademark rights in Japan, the United States and other countries and areas.VESA is a trademark of a nonprofit organization, Video Electronics Standard Association. Android is a trademark of Google Inc.All other trademarks are the property of their respective owners. The images in this brochure are samples.All specifications are subject to change without notice. March 2016Cat. No. WLCD-1603-0011NNEC Display Solutions, Ltd.SpecificationsDimensionsOptionsTerminalsLocal options: please contact your supplier.AUDIO OUT LAN PORT (RJ-45)VGA (Mini D-Sub 15 pin)DVI (DVI-D)SERVICE PORTAUDIO INDisplayPort INDisplayPort OUTEXTERNALSPEAKER TERMINAL INTERNAL/EXTERNAL SPEAKER SWITCHRS-232CHDMI INREMOTE IN X754HB:1694.4X554HB:1253.6X754HB:146.2X554HB:137.7X754HB / X554HB / X474HBHigh-brightness with the most advanced technologies delivers what is needed at your sites/ap/X754HB / X554HB / X474HB23HighlightsThe state-of-the-art connectivity and sensors allow additional creativity in the content displayed and how it is controlled. The unique built-in NFC sensor, in combination with NEC’s new Android app, reduces installation and maintenance times, which is especially useful on larger installations. The Human Sensor is aware of viewer presence based on proximity and can change brightness, volume, and inputs or power the display up or down, resulting in added engagement and considerable energy savings over time.The HB series is designed to be installed in shop windows or in cabinets for outdoor applications, offering high levels of brightness. The display can be seen clearly in bright locations where external light shines in and is thus optimal for digital signage on which information must be displayed accurately.Thanks to the multi-stream function of DisplayPort, multiple displays can be daisychained and still be individually controlled. This also makes a 2 × 2 video wall with native Ultra High Difinition 4K/2K (3,840 × 2,160) possible.Dedicated Colour Calibration Software*As the brightness and colour temperature of the LCD change with time, colours may not match across multiple screens. Our dedicated colour calibration software ensures colour uniformity and fidelity across multiple screens, creating a perfectly matched image in tiled environments.The dual slot technology allows for the integration of Open Pluggable Specification (OPS*) boards and other option slot products without the need to store additional external equipment. This offers the greater flexibilitycustomers require.Video signals and control signals can be daisy chained with one DisplayPort and LAN line respectively, meaning that just two cables manage everything for setup.Monitoring and managing the temperature of each display is crucial to secure reliability and longevity.An industrial-strength, premium-grade panel with additional thermal protection, internal temperature sensors with selfdiagnostics, and fan-based technology allows for 24/7 operation, and protects your display investment.The built-in near field communication (NFC) chip allows data to be read and written via a mobile phone or tablet PC. Users can significantly reduce installation costs as displays can be easily configured and serviced using the NEC NFC Android app. This is available even when the display is switched off and especially useful on larger installations.This new optional human (motion) sensor accessory (KT -RC2) helps to deliver creative digital signage to end users by allowing for dynamic control of brightness, audio and source inputs while saving on operating costs. Auto dimming adjusts the backlight of the LCD automatically depending on the amount of ambient light.Simplify your installations with HDBaseT, which is optimized for video applications and supports uncompressed Full-HD digital video, audio, Ethernet, and various control signals. With only a single cable (up to 100 m) to run, infrastructure and labour costs are reduced, installations are significantly easier, and there is no cable clutter to manage. With uncompressed HD video support, images have never been morestunning. What’s more, control signals are contained in the same cable.This software is an all-in-one remote support solution that runs from a central location and provides monitoring, asset management and control functionality of the majority of NEC display devices and Windows computers. It is ideal for multi-device installations over larger infrastructures.Proof of PlayThis function provides accurate proof that displays are working as established and is helpful when checking on the status of the displaysinstalled at user’s site.No human (motion) detected• Practical exampleHuman (motion) detectedX754HB / X554HB / X474HB* Requires the optional HDBaseT board, SB-07BC* NEC Display Wall Calibrator* OPS is a standard established by Intel Corporation.OPS*Interface Extension• Just one cable for each video and control • Just two cables will manage everything • Up to 100 displays can be daisy chainedOther Useful Features and Functions• Landscape/portrait capable • Scheduler with real-time clock• Intelligent power management system • Power on delay • Screen saver function • Aspect ratio control • Memo function • Carbon footprint metre• Image and on-screen display ip • Picture-in-picture, picture-out-picture • Built in speakers • Point zoom• Control lock function• 6-axis colour adjustments and sRGB standard• Advanced video settings(Noise reduction, adaptive contrast)• Colour temperature adjustment• Programmable gamma setting (3 settings)• DICOM simulation• Plug and pay (DDC/CI, DDC2B)• HDCP (High-bandwidth Digital Content Protection)• Ethernet and RS-232C control and communication• CRESTRON ROOMVIEW™• AMX Discovery HTTP server • PJLink • Self-diagnosis • Status log function • Firmware update over LAN• Metal rear cabinet with VESA Standard (FDMIv1) Mounting Interface • HandlesX754HB / X554HB / X474HB。
三菱TFT液晶屏型号
※1 PCAP: 投射型电容方式 ※2 ITO: 铟锡氧化物 ※3:除了3.5寸-5.7寸的产品 ※4:同时触摸2点或2点以上进行的操作
多点触控操作
防护玻璃 传感器电路板 LCD液晶模块
触摸屏的简单示意图
检测布线
耐噪声
灵敏度
搭载四线电阻式触摸屏的液晶模块
我们可提供高通用性、对应各种工业设备领域需求的四线 电阻式触摸屏与工业用液晶模块相结合的产品阵容。借助 液晶模块与触摸屏产品组装的一条龙生产实现高可靠性。
以往形式
保护玻璃 空气层 LCD
玻璃粘结型形式
保护玻璃 接合树脂 LCD
由于反射显示效果不佳
反射极少（1/10以下的反射率）
半透半反射型TFT液晶模块
半透半反射型液晶模块兼具透射和反射模式，可 分别利用背光或环境光作为光源。透射模式可在 昏暗环境下提供高可视性，反射模式可在强光环 境下无需利用背光亮度来维持高可视性。因此，半 透半反射型TFT液晶模块可大大节约功耗，可谓 是工业便携设备的最佳选择。三菱电机已经开始 批量生产5.7寸、8.4寸模块，今后还将进一步扩 充产品线。
AA084XD01ADA11 NEW
AA084XD11
XGA
AA084XD11ADA11 NEW
(1024x768) AA084XE01
AA084XE01ADA11 NEW
AA084XE11
AA084XE11ADA11 NEW
AA090ME01
Wide-VGA AA090ME01--T1
(800x480) AA090MH01
三菱电机工业用彩色TFT液晶模块 杭州旭虹科技有限公司
工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ
MTFoTdLuCleDs
MITSUBISHI AC150XA02_02_00 XGA TFT-LCD模块技术规格说明书
By applying 6 bit or 8 bit digital data, 1024u 768, 262k-color or 16.7M-color images are displayed on the 15.0” diagonal screen. Input power voltages are 3.3 V for LCD driving and 12.0 V for backlight unit. The type of data and control signals are digital and transmitted via LVDS interface per Typ. 65 MHz clock cycle.
The product specified in this document is designed for “Standard Usage” unless otherwise specified in this document. If customers intend to use the product for applications other than those specified for “Standard Usage”, they should first contact MITSUBISHI sales representative for it's intended use in writing.
NJ070NA-23A 群创7寸液晶屏-杭州旭虹科技
INNOLUX DISPLAY CORPORATIONLCD MODULESPECIFICATIONCustomer:Model Name: NJ070NA-23ADate: 2017/02/27Version: 01□Preliminary Specification■Final SpecificationFor Customer’s AcceptanceApproved by CommentApproved by Reviewed by Prepared byCs.Chang Henry.Chien 2016/12/27 Cc01.ChenWenguo.DengSunny.Sun2016/12/27Rong.Ye2016/12/27InnoLux copyright 2016All rights reserved,Copying forbidden.Record of RevisionVersion Revise Date Page ContentPre-Spec.V01 2014/04/15 All Initial Release.Pre-Spec.V02 2014/12/23 1 Update Backlight power consumption& Panel power consumption& Weight5 Update Operation Specifications6 Update Input signal voltage7 Update Current Consumption& Backlight Driving Conditions13 Update Optical Specifications20 Update Packaging Material TablePre-Spec.V03 2015/01/09 7 Update Current Consumption18 Update Safety19 Modify Mechanical Drawing21 Modify Package DrawingFinal-Spec 2015/04/20 First Final Release for P070BAG-CM119 Modify Mechanical Drawing2016/01/07 19 Modify Mechanical Pixel size.Final-Spec-V01 2016/12/271 Model name change from P070BAG-CM1 to NJ070NA-23AFinal-Spec-V02 2017/02/27 20 Modify Reliability Test ItemINNO L U XContents1. General Specifications (1)2. Pin Assignment (2)3. Operation Specifications (5)3.1. Absolute Maximum Ratings (5)3.1.1. Typical Operation Conditions (6)3.1.2. Current Consumption (7)3.1.3. Backlight Driving Conditions (7)3.2. Power Sequence (8)3.3. Timing Characteristics (9)3.3.1. AC Electrical Characteristics (9)3.3.2. Input Clock and Data Timing Diagram (9)3.3.3. DC Electrical Characteristics (10)3.3.4. Timing (11)3.3.5. Data Input Format (12)4. Optical Specifications (13)5. Reliability Test Items (17)6. General Precautions (18)6.1. Safety (18)6.2. Handling (18)6.3. Static Electricity (18)6.4. Storage (18)6.5. Cleaning (18)7. Mechanical Drawing (19)8. Package Drawing (20)8.1. Packaging Material Table (20)8.2. Packaging Quantity (20)8.3. Packaging Drawing (21)1. General SpecificationsThe specification NJ070NA-23A is a 7 ”(1024x600) TFT Liquid Crystal Display module with LED Backlight unit , 40 pin LVDS interface, normally white transmissive display mode. This module will be applied to Consumer Electronics(CE Application)No. Item Specification Remark1 LCD size 7.0 inch(Diagonal)2 Driver element a-Si TFT active matrix3 Resolution 1024 × 3(RGB) × 6004 Display mode Normally White, Transmissive5 Pixel size 0.1506(W) × 0.1432(H) mm6 Active area 154.2144(W) × 85.92(H) mm7 Module size 164.9(W) ×100(H) ×4.8(D) mm Note 18 Surface treatment Hard Coating9 Color arrangement RGB-stripe10 Interface LVDS11 View direction(Gray Inversion) 6 O’Clock12 Backlight power consumption 2.62 W (Typ.)13 Panel power consumption 0.4 W (Typ.)14 Weight 140g (Typ.)15 Source Driver IC NT51008QH-D/3EA16 Gate Driver IC NT52003BH-D/3EBNote 1: Refer to Mechanical Drawing.2. Pin AssignmentFPC Connector is used for the module electronics interface. The recommended model is FH12A-40S-0.5SH manufactured by Hirose.Pin No. Symbol I/O Function Remark1 VCOM P Common Voltage2 VDD P Power Voltage for digital circuit3 VDD P Power Voltage for digital circuit4 NC --- No connection5 Reset I Global reset pin6 STBYB I Standby mode, Normally pulled high STBYB = “1”, normal operation STBYB = “0”, timing controller, source driver will turn off, all output are High-Z7 GND P Ground8 RXIN0- I - LVDS differential data input9 RXIN0+ I + LVDS differential data input10 GND P Ground11 RXIN1- I - LVDS differential data input12 RXIN1+ I + LVDS differential data input13 GND P Ground14 RXIN2- I - LVDS differential data input15 RXIN2+ I + LVDS differential data input16 GND P Ground17 RXCLKIN- I - LVDS differential clock input18 RXCLKIN+ I + LVDS differential clock input19 GND P Ground20 RXIN3- I - LVDS differential data input21 RXIN3+ I + LVDS differential data input22 GND P Ground23 NC --- No connection24 NC --- No connection25 GND P Ground26 NC --- No connection27 DIMO O Backlight CABC controller signal output28 SELB I 6bit/8bit mode select Note129 AVDD P Power for Analog Circuit30 GND P Ground31 LED- P LED Cathode32 LED- P LED Cathode33 L/R I Horizontal inversion Note334 U/D I Vertical inversion Note335 VGL P Gate OFF Voltage36 CABCEN1 I CABC H/W enable Note237 CABCEN0 I CABC H/W enable Note238 VGH P Gate ON Voltage39 LED+ P LED Anode40 LED+ P LED AnodeI: input, O: output, P: PowerNote1: If LVDS input data is 6 bits ,SELB must be set to High;If LVDS input data is 8 bits ,SELB must be set to Low.Note2: When CABC_EN=”00”, CABC OFF.When CABC_EN=”01”, user interface image.When CABC_EN=”10”, still picture.When CABC_EN=”11”, moving image.When CABC off, don’t connect DIMO, else connect it to backlight. Note3: When L/R=”0”, set right to left scan direction.When L/R=”1”, set left to right scan direction.When U/D=”0”, set top to bottom scan direction.When U/D=”1”, set bottom to top scan direction.Note: Definition of scanning direction. Refer to the figure as below:LeftTOPRightBottom3. Operation Specifications3.1. Absolute Maximum Ratings(Note 1)Item SymbolValuesUnit Remark Min. Max.Power voltageDV DD -0.3 5.0 V AV DD 6.5 13.5 V V GH -0.3 42.0 V V GL -20.0 0.3 V V GH-V GL- 40.0 VOperation T emperature T OP -20 70 ℃Storage T emperature T ST-30 80 ℃LED Reverse Voltage V R- 5 VEach LED LED Forward Current I F- 60 mA Each LEDNote 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratingsexceeded, the characteristics of the module may not be recovered, or in an extremecase, the module may be permanently destroyed.3.1.1. Typical Operation Conditions( Note 1)ItemSymbolValuesUnitRemarkMin.Typ. Max. Power voltageDV DD 3.0 3.3 3.6 V Note 2 AV DD10.81111.2VV GH 19.7 20 20.3 V V GL-6.5 -6.8 -7.1 V Input signal voltage V COM 3.3 3.8 4.3 V Note 4Input logic high voltage V IH 0.7 DV DD- DV DD VNote 3Input logic low voltageV IL-0.3 DV DDVNote 1: Be sure to apply DV DD and V GL to the LCD first, and then apply V GH .Note 2: DV DD setting should match the signals output voltage (refer to Note 3) ofcustomer’s system board.Note 3: LVDS, Reset.Note 4: Typ. V COM is only a reference value, it must be optimized according to each LCM.Be sure to use VR;3.1.2. Current ConsumptionItem SymbolValuesUnit Remark Min. Typ. Max.Current for DriverI GH - 0.26 1 mA V GH =20V I GL - 0.26 1 mA V GL = -6.8V IDV DD - 35 60 mA DV DD =3.3V IAV DD - 20 30 mA AV DD =11V3.1.3. Backlight Driving ConditionsItem SymbolValuesUnit Remark Min. Typ. Max.Voltage for LED backlight V L 8.4 9.9 10.2 V Note 1 Current for LED backlight I L -- 265 -- mALED life time - 20,000 - - Hr Note 2 Note 1: The LED Supply Voltage is defined by the number of LED at Ta=25℃ andI L =265mA.Note 2: The “LED life time” is defined as the module brightness decrease to 50% original brightness at Ta=25℃ and I L =265mA. The LED lifetime could be decreased ifoperating I L is lager than 265mA.3.2. Power Sequencea. Power on:VDD A VGL VGH LVDS Signal B/L VDD A VGL VGH LVDS SignalB/L3.3. Timing Characteristics3.3.1. AC Electrical CharacteristicsParameter SymbolValuesUnit Remark Min. Typ. Max.Clock frequency R xFCLK40.8 51.2 67.2 MHz Input data skew margin T RSKM500 - - ps Clock high time T LVCH- 4/(7* R xFCLK) - ns Clock low time T LVCL- 3/(7* R xFCLK) - ns3.3.2. Input Clock and Data Timing Diagram3.3.3. DC Electrical CharacteristicsParameter SymbolValuesUnit Remark Min. Typ. Max.Differential input high Threshold voltage R xVTH- - +0.1 VR XVCM=1.2VDifferential input lowThreshold voltageR xVTL-0.1 - - V Input voltage range(singled-end)R xVIN0 - 2.4 V Differential input common modevoltageR xVCM|V ID|/2 - 2.4-|V ID|/2 V Differential voltage|V ID|0.2 - 0.6 V Differential input leakage current RV xliz-10 - +10 uA3.3.4. TimingItem SymbolValuesUnit Remark Min. Typ. Max.Clock Frequency fclk 40.8 51.2 67.2 MHz Frame rate =60HzHorizontal display area thd1024 DCLK HS period time th1114 1344 1400 DCLK HS Blanking thb90 320 376 DCLK Vertical display area tvd600 H VS period time tv610 635 800 H VS Blanking thb10 35 200 H3.3.5. Data Input Format6bit LVDS input8bit LVDS inputNote: Support DE timing mode only, SYNC mode not supported.4. Optical SpecificationsItem Symbol ConditionValuesUnit Remark Min. Typ. Max.Viewing angle (CR≥ 10) θLΦ=180°(9 o’clock)65 75 -degree Note 1 θRΦ=0°(3 o’clock) 65 75 -θTΦ=90°(12 o’clock)60 70 -θBΦ=270°(6 o’clock)65 75 -Response timeT ONNormalθ=Φ=0°- 10 20 msec Note 3T OFF - 15 30 msec Note 3 Contrast ratio CR 500 800 - - Note 4Color chromaticity W X 0.26 0.31 0.36 - Note 2Note 5Note 6 W Y 0.28 0.33 0.38 -Luminance L 400 500 - cd/m² Note 6 LuminanceuniformityY U 70 75 - % Note 7Test Conditions:1. DV DD=3.1V, I L=265mA (Backlight current), the ambient temperature is 25℃.2. The test systems refer to Note 2.Fig. 4-1 Definition of viewing angleNote 2: Definition of optical measurement system.The optical characteristics should be measured in dark room. After 30 minutesoperation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, otheritems are measured by BM-5A/Field of view: 1° /Heig ht: 500mm.)Fig. 4-2 Optical measurement system setup6 o’clock directionΦ=0°Φ=180°6 o’clock direction Φ=0°Φ=180°LCMNote 3: Definition of Response timeThe response time is defined as the LCD optical switching time interval between“White” state and “Black” state. Rise time (T ON ) is the time between photo detector output intensity changed from 90% to 10%. And fall time (T OFF ) is the time between photo detector output intensity changed from 10% to 90%.Fig. 4-3 Definition of response timeNote 4: Definition of contrast ratiostate Black"" the on LCD when measured Luminance stateWhite"" the on LCD when measured Luminance (CR) ratio Contrast =Contrast ratio is measured at center point of LCD.Note 5: Definition of color chromaticity (CIE1931)Color coordinates measured at center point of LCD.Note 6: Definition of luminance:Measured at the center area of the panel when LCD panel is driven at “white ” state. The LED driving condition is I L =265mA .90%10% 0%P h o t o d e t e c t o r o u t p u t (R e l a t i v e v a l u e )ONWhite (TFT OFF)Black (TFT ON)White (TFT OFF)Note 7: Definition of Luminance UniformityActive area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the center of each measuring area.max minB B (Yu)Uniformity Luminance =L-------Active area length W----- Active area widthFig. 4-4 Definition of measuring pointsB max : The measured maximum luminance of all measurement position. B min : The measured minimum luminance of all measurement position.5. Reliability Test ItemsItem Test Conditions Remark High Temperature Storage Ta = 80℃240hrs Note 1，Note3，Note 4，Note5Low Temperature Storage Ta = -30℃240hrs Note 1，Note3，Note 4High Temperature Operation Ts = 70℃240hrs Note 2，Note3，Note 4，Note5Low Temperature Operation Ta = -20℃240hrs Note 1，Note3，Note 4Operate at High Temperature and Humidity +60℃, 90%RH 240hrsNote3，Note 4Note5Thermal Shock [(-30℃30min)→(80℃30min)]/cycle，100cyclesNote3，Note 4Note5Vibration Test Frequency: 10 ~55~10Hz; Sweep Mode: Log SweepSweep time: 1Oct/min; Acceleration: 1.5G; Test time: 2hrs for each direction of X, Y, Z.Mechanical Shock 100G, 6ms, half sine wave, 3 times for each direction of ±X, ±Y, ±ZPackage Vibration Test Random Vibration :ISTA-3A 1Hz~200Hz,Grms=0.53 Half hours for direction of ZPackage Drop Test 72cm(weight≦10kg), 60cm(weight＞10kg);1 times for 6-faces, 3-edges and 1-cornerElectro Static Discharge Contact mode：150pf，330Ω，±2KV Air mode：150pf，330Ω，±2KVNote 1: Ta is the ambient temperature of samples.Note 2: Ts is the temperature of panel’s surface.Note 3: In the standard condition, there shall be no practical problem that may affect the display function. After the reliability test, the product only guarantees operation,but don’t guarantee all of the cosmetic specification.Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature.Note 5: A certain level of Mura (non-uniformity) of dark / black image will happen several days after high temperature testing (H.T.T.). There is a slowly part recovery over a long time (several months). Such a long exposure time like in H.T.T. will normally not happen in a real application. Therefore the test H.T.T. was introduced tosimulate cycles with normal conditions in-between but with the same totalexposure time what show a significant reduced Mura.The root cause is related to tension generated due to different amount of shrinking in thestack of layers in the polarizer sheet. The effect is more significant on larger displays likethis size. An investigation into alternative polarizer material showed that there is no better alternative currently available.6. General Precautions6.1. Safety1.Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches yourskin or clothes, wash it off immediately by using soap and water.2.The temperature for use is no more than 80 C, otherwise, only promise the functionis OK, but the quality may be changed.6.2. Handling1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or toexcessive force on its surface.2. The polarizer attached to the display is easily damaged. Please handle it carefullyto avoid scratch or other damages.3. To avoid contamination on the display surface, do not touch the module surfacewith bare hands.4. Keep a space so that the LCD panels do not touch other components.5. Put cover board such as acrylic board on the surface of LCD panel to protect panelfrom damages.6. Transparent electrodes may be disconnected if you use the LCD panel underenvironmental conditions where the condensation of dew occurs.7. Do not leave module in direct sunlight to avoid malfunction of the ICs.6.3. Static Electricity1. Be sure to ground module before turning on power or operating module.2. Do not apply voltage which exceeds the absolute maximum rating value.6.4. Storage1. Store the module in a dark room where must keep at 25±10℃ and 65%RH or less.2. Do not store the module in surroundings containing organic solvent or corrosivegas.3. Store the module in an anti-electrostatic container or bag.6.5. Cleaning1. Do not wipe the polarizer with dry cloth. It might cause scratch.2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals mightpermanent damage to the polarizer.7. M echanical Drawing8. Package Drawing8.1. Packaging Material TableNo. ItemModel(Material)Dimensions(mm)UnitWeight(kg)Quantity（PCS）Remark1 LCM NJ070NA-23A164.90x100x4.8 0.140 502 Dust-Proof BagPE 700 x 530x0.05 0.048 13 CrepePaper_Tape四維CM35 30x10x0.1 0.001 504 CorrugatedBarBC Corrugatedpaper510x122 0.046 45 Partition BC Corrugatedpaper512 × 349 × 226 1.466 16 A/S Bag PE 178*160*0.06 0.004 507 Carton Corrugatedpaper525 × 362 × 250 0.950 18 Total weight 10.12± 5%Kg8.2. Packaging QuantityTotal LCM quantity in Carton: no. of Partition 2 Rows × quantity per Row 25 = 508.3. Packaging Drawing。
AT043TN24 V.7 pre-spec-杭州旭虹科技有限公司
CHIMEI INNO L U X DISPLAY CORPORATIONLCD MODULESPECIFICATIONCustomer: CNSBGModel Name: AT043TN24 V.7SPEC NO.: A043-24-TT-71Date: 2010/04/19Version: 01■Preliminary Specification□Final SpecificationRemark■Touch Screen Panel (3-in-1FPC)■Low Power ConsumptionFor Customer’s AcceptanceApproved by CommentApproved by Reviewed by Prepared byJoe Lin2010/04/24Jack HuangJames YuCharlie Chou2010/04/23Charlie Chou2010/04/23CHIMEI INNO L U XInnoLux copyright 2004All rights reserved,Copying forbidden.Record of RevisionVersion Revise Date Page Content Pre-spec .01 2010/04/19 Initial Release.CHIMEI INNO L U XContents1. General Specifications (1)2. Pin Assignment (2)2.1. TFT LCD Panel Driving Section (2)2.2. Touch Screen Panel Section (3)3. Operation Specifications (5)3.1. Absolute Maximum Ratings (5)3.2. Typical operation conditions (6)3.3 Backlight Driving Conditions (6)3.4. Power Sequence (7)3.5. Timing Characteristics (8)3.5.1. Timing Conditions (8)3.5.2. Timing Diagram (9)4. Touch Screen Panel Specifications (10)4.1. Electrical Characteristics (10)4.2. Mechanical & Reliability Characteristics (11)4.3. Linearity Definition (12)4.4. Housing design guide (13)5. Optical Specifications (14)6. Reliability Test Items (18)7. General Precautions (19)7.1. Safety (19)7.2. Handling (19)7.3. Static Electricity (19)7.4. Storage (19)7.5. Cleaning (19)8. Mechanical Drawing (20)9. Package Drawing (21)9.1. Packaging Material Table (21)9.2. Packaging Quantity (21)9.3. Packaging Drawing (22)1. General SpecificationsNo. Item Specification Remark1 LCD size 4.3 inch(Diagonal)2 Driver element a-Si TFT active matrix3 Resolution 480 × 3 (RGB) × 2724 Display mode Normally White, Transmissive5 Dot pitch 0.066(W) × 0.198(H) mm6 Active area 95.04(W) × 53.856(H) mm7 Module size 105.5(W) × 67.2(H) × 4.05(D) mm Note 18 Surface treatment Anti-Glare9 Color arrangement RGB-stripe10 Interface Digital11 Backlight Power consumption 0.558 W(Typ.)12 Panel Power consumption 0.056 W (Typ.)13 Weight TBD (Typ.)Note 1: Refer to Mechanical Drawing.2. Pin Assignment2.1. T FT LCD Panel Driving SectionFPC Connector is used for the module electronics interface. The recommended model is “FH19SC-40S-0.5SH” manufactured by HIROSE.Pin No. Symbol I/O Function Remark1 V LED-P Power for LED backlight cathode2 V LED+P Power for LED backlight anode3 GND P Power ground4 V DD P Power voltage5 R0 I Red data (LSB)6 R1 I Red data7 R2 I Red data8 R3 I Red data9 R4 I Red data10 R5 I Red data11 R6 I Red data12 R7 I Red data (MSB)13 G0 I Green data (LSB)14 G1 I Green data15 G2 I Green data16 G3 I Green data17 G4 I Green data18 G5 I Green data19 G6 I Green data20 G7 I Green data (MSB)Date : 2010/04/19 Page : 3/2221 B0 I Blue data (LSB)22 B1 I Blue data23 B2 I Blue data24 B3 I Blue data25 B4 I Blue data26 B5 I Blue data27 B6 I Blue data28 B7 I Blue data (MSB)29 GND P Power ground30 CLK I Pixel clock31 DISP I Display on/off32 NC - No connection33 NC - No connection34 DE I Data Enable35 NC - No connection36 GND P Power ground37 X1 I/O Right electrode – differential analog38 Y1 I/O Bottom electrode – differential analog39 X2 I/O Left electrode – differential analog40 Y2 I/O Top electrode – differential analogI: input, O: output, P: Power2.2. Touch Screen Panel SectionPin No. Symbol I/OFunctionRemark1 X1 Right Right electrode – differential analog2 Y1 Bottom Bottom electrode – differential analog3 X2 Left Left electrode – differential analog4 Y2 Top Top electrode – differential analogNote: Touch Screen Panel BlockTop View3. Operation Specifications3.1. Absolute Maximum Ratings(Note 1)ValuesItemSymbolMin.Max.UnitRemarkPower voltage V DD -0.55.0 VInput signal voltage Logic input-0.5 5.0 VOperation temperature T OP -20 70 ℃Note 3, 4 Storage temperature T ST -30 80 ℃ Note 3, 4 LED Reverse Voltage V R - 1.2 V Each LEDNote 2 LED Forward CurrentI F-25mAEach LEDNote 1: The absolute maximum rating values of this product are not allowed to beexceeded at any times. A module should be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme condition, the module may be permanently destroyed.Note 2: V R Conditions: Zener Diode 20mANote 3: 90% RH Max. (Max wet temp. is 60℃)Maximum wet-bulb temperature is at 60℃ or less. And No condensation (no drops of dew)(℃)Note 4: In case of temperature below 0℃,the response time of liquid crystal (LC) becomesslower and the color of panel darker than normal one.+60℃, 90%RHDate : 2010/04/19 Page : 6/22 3.2. Typical operation conditionsValuesUnit Remark Item SymbolMin. Typ. Max.Power voltage V DD 3.1 3.3 3.5 VCurrent for Driver IV DD - 17 25 mA V DD = 3.3VInput logic high voltage V IH 0.8V DD - V DD VNote 1 Input logic low voltage V IL GND - 0.2V DD VNote1: CLK, DE, R0~ R7, G0~ G7, B0~ B7.3.3 Backlight Driving ConditionsValuesItem SymbolUnit RemarkMin. Typ. Max.Voltage for LED Backlight V L 25.2 27.9 31.5 V Note 2Current for LED Backlight I L 18 20 22 mALED life time - 20,000 - - Hr Note 1Note 1: The “LED life time” is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25℃ and I L =20mA. TheLED lifetime could be decreased if operating I L is lager than 20 mA.Note 2: The LED Supply Voltage is defined by the number of LED at Ta=25℃ andI L =20mA.Date : 2010/04/19 Page : 7/22 3.4. Power SequenceTo prevent a latch-up or DC operation of the LCD module, the power on/off sequence should be as the diagram below.Symbol Specification Symbol Specification T1 0≦T1≦10 msec T4 160 msec ≦T4T2 0≦T2≦100 msec T5 160 msec ≦T5T3 0≦T3≦200 msec T6 1 msec ≦T63.5. Timing Characteristics3.5.1. Timing ConditionsParallel DE mode RGB input timing tableValueUnit Parameter SymbolMin. Typ. Max.CLK frequency fclk 7 9 12 MHz DEV period time Tv 277 288 400 H DEV display area Tvd 272HDEV blanking Tvb 5 16 128 HDEH period time Th 520 525 800 CLK DEH display area Thd 480 CLKDEH blanking Thb 40 45 320 CLK CLK cycle time Tclk83 110 143 ns Clock width of high level Tcwh 40 50 60 % Clock width of low level Tcwl 40 50 60 % Clock rising time t rck- 9 ns Clock falling time t fck- 9 ns Data Setup Time t desu10 - - nsData Hold Time t dahd10 - - nsDE Setup Time t desu10 - - nsDE Hold Time t dehd10 - - ns3.5.2. Timing Diagram4. Touch Screen Panel Specifications4.1. Electrical CharacteristicsValueUnit Remark ItemMin. Typ. Max.Linearity -1.5 - 1.5 % Analog X and Y directions300 - 1500 Ω XTerminal Resistance100 - 900 Ω YInsulation resistance 25 - - MΩ DC 25VVoltage - 5 7 V DCChattering - - 10 ms 100kΩ pull-up Transparency 80 - - % JIS K7105Note: Avoid operating with hard or sharp material such as a ball point pen or a mechanical pencil except a polyacetal pen (tip R0.8mm or less) or a finger.4.2. Mechanical & Reliability CharacteristicsValueItemMin. Typ. Max.Unit Remark Activation force 80 - - gf Note 1Durability-surface scratchingWrite100,000- - characters Note 2Durability-surfacepitting1,000,000 - - touches Note 3Surface hardness 3 - - H JIS K5400 Note 1:Activation force test condition(1) Input DC 5V on X direction, Drop off Polyacetal Stylus (R0.8), untiloutput voltage stabilize ,then get the activation force。
天马3.5寸工业液晶屏TM035KDH03规格书-杭州旭虹科技有限公司
杭州旭虹科技有限公司
SHANGHAI TIANMA MICRO-ELECTRONICS TM035KDH03 V1.3
Table of Contents
Coversheet........................................................................................................................................ 1 Record of Revision............................................................................................................................ 3 1. 2. 3 4 5 6 7 8 9 General Specifications ............................................................................................................... 4 Input/Output Terminals ............................................................................................................... 5 Absolute Maximum Ratings ....................................................................................................... 8 Electrical Characteristics............................................................................................................ 8 Timing Chart............................................................................................................................. 10 Optical Characteristics ............................................................................................................. 17 Environmental / Reliability Tests............................................................................................... 21 Mechanical Drawing................................................................................................................. 22 Packing drawing ...................................................................................................................... 23
15寸户外高亮液晶屏KSN150YP01-A01
Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 1/23 02 Issue date 2014/02/12 RevisionProduct InformationTo: Product Name: KSN150YP01-A01 Document Issue Date: 2014/02/12 CustomerSIGNATUREInfoVision OptoelectronicsSIGNATURE REVIEWED BY QAPREPARED BY FAEPlease return 1 copy for your confirmation with your signature and comments.Note: 1. Please contact InfoVision Company before designing your product based on this product. 2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by KINSOON for any intellectual property claims or other problems that may result from application based on the module described herein.FQ-7-30-0-009-03C________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 2/23 02 Issue date 2014/02/12 RevisionRevision00 01 02Date2013/04/24 2014/01/20 2014/01/20 2014/02/12Pageall 6 20 11Old Description-No T/H curve No Lot mark information No LT TypNew DescriptionFirst issue. Add T/H curve Update Lot mark Update LT TypRemark________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 3/23 02 Issue date 2014/02/12 RevisionContents1.0 General Descriptions Introduction . .........................................................................................3 2.0 Absolute Maximum Ratings .......................................................................................................5 3.0 Pixel Format Image . .....................................................................................................................6 4.0 Optical Characteristics . ..............................................................................................................7 5.0 Backlight Characteristics . ........................................................................................................10 6.0 Electrical Characteristics . ........................................................................................................11 7.0 Interface Timings . .......................................................................................................................13 8.0 Power Consumption . .................................................................................................................14 9.0 Power ON/OFF Sequence. ........................................................................................................16 10.0 Mechanical Characteristics . ..................................................................................................17 11.0 Reliability . ...................................................................................................................................18 12.0 Package Specification . ...........................................................................................................19 13.0 Lot Mark . .....................................................................................................................................20 14.0 General Precaution . .................................................................................................................20________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 4/23 02 Issue date 2014/02/12 Revision1.0 General Descriptions Introduction1.1 Introduction The KSN150YP01-A01 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of a TFT LCD panel, a backlight system, column driver and row driver circuit. This TFT LCD has a 15.0-inch diagonally measured active display area with resolution (1024 horizontal by 768 vertical pixels array). 1.2 Features ■ 15.0” TFT LCD Panel ■ LED Backlight System ■ Supported 1024x768 pixels resolution ■ Compatible with RoHS standard 1.3 Product Summary Items Specifications Unit Screen Diagonal Active Area (H x V) Number of Pixels (H x V) Pixel Pitch (H x V) Pixel Arrangement Display Mode White Luminance Contrast Ratio Response Time Input Voltage Weight Outline Dimension (H x V x D) Electrical Interface (Logic) Support Color Optimum Viewing Direction Surface Treatment 15.0 304.128 x 228.096 1024(RGB) x768 0.297 x 0.297 R.G.B. Vertical Stripe Normally White 1000(Typ.) 800(Typ) 16(Typ.) 3.3(Typ.) 960 (Max) 326.5(Typ.)x 253.5(Typ.)x12(Typ.) LVDS 16.2M 6 o’clock Anti-glare, Hard-Coating (3H) Inch mm mm cd /m2 ms V g mm -________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. 1.4 Functional Block Diagram Figure 1 shows the functional block diagram of the LCD module. Figure 1 Block Diagram KSN150YP01-A01 Product Information Page No. 5/23 02 Issue date 2014/02/12 Revision________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 6/23 02 Issue date 2014/02/12 Revision2.0 Absolute Maximum RatingsTable 1 Absolute Ratings of EnvironmentItem Symbol Min. Max. Unit ConditionsSupply Voltage Operating Temperature Operating Humidity Storage Temperature Storage HumidityV DD TOP HOP TST HST-0.5 -20 10 -30 105 70 85 80 95V℃(1) (1) (2) (3) (4) -%RH℃%RHNote (1): Humidity: 85%RH Max. (T<=40℃) Note static electricity. Maximum wet bulb temperature at 39℃ or less. (T>40℃) No condensation. Note (2): There is a possibility of causing deterioration in the irregularity and others of the screen and the display fineness though the liquid crystal module doesn’t arrive at destruction when using it at 60~70℃ or -20~0℃. Note (3): There is a possibility of causing the fineness deterioration by the prolonged use in the (high temperature) humidity environment (60% or more). Note (4): In the operating temperature item, the low temperature side is the ambient temperature regulations. The high temperature side is the panel surface temperature regulations.________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 7/23 02 Issue date 2014/02/12 Revision3.0 Pixel Format ImageFigure 2 shows the relationship of the input signals and LCD pixel format image. Figure 2 Pixel FormatR+G+B dots=1 pixel________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 8/23 02 Issue date 2014/02/12 Revision4.0 Optical CharacteristicsThe optical characteristics are measured under stable conditions as following notes Table 2 Optical Characteristics Item Viewing Angle Conditions Horizontal Vertical Center Rising Response Time Falling Rising + Falling NTSC Red Red Color Chromaticity (CIE1931) Green Green Blue Blue White White White Luminance Luminance Uniformity Center 9Points x y x y x y x y 0.255 0.275 800 75 Typ. -0.03 θL θR θT θB Min. 70 70 70 60 450 Typ. 80 80 80 80 800 5 11 16 70 0.625 0.352 0.315 0.63 0.149 0.067 0.305 0.325 1000 80 0.355 0.375 Typ. +0.03 Max. ms ms ms % cd/m^2 % (1),(2),(6) (1),(2),(6) (1),(2) (1),(2) (1),(2),(5) (1),(2),(4) degree (1),(2),(3) Unit Note（CR>10）Contrast Ratio________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. Note (1) Measurement Setup: KSN150YP01-A01 Product Information Page No. 9/23 02 Issue date 2014/02/12 RevisionThe LCD module should be stabilized at given temperature(25 ) for 15 minutes to Avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting backlight for 15 minutes in a windless room. Figure 3 Measurement SetupLCD Module LCD LCDModule Panel Center of the Screen Photo meter (DMS 1140)℃Light Shield Room 180mm *Ambient Luminance<2lux *Ambient TemperatureNote (2) The LED input parameter setting as: VLED: 12V; PWM_LED: Duty 100 % Note (3) Definition of Viewing Angle Figure 4 Definition of Viewing Angle________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. Note (4) Definition Of Contrast Ratio (CR) The contrast ratio can be calculated by the following expression Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255, L0: Luminance of gray level 0 Note (5) Definition Of Response Time (TR, TF) Figure 555 Definition of Response TimeWhite(TFT OFF)KSN150YP01-A01 Product InformationPage No. 10/23 02Issue date 2014/02/12 RevisionWhite(TFT OFF)Black(TFT ON)TR 100% 90%TF10% 0TimeNote (6) Definition Of Brightness LuminanceLuminance Uniformity =(Min Luminanceof 9 points) × 100% (Max Luminanceof 9 points)Figure 6 Measurement Locations________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 11/23 02 Issue date 2014/02/12 Revision5.0 Backlight Characteristics5.1 Parameter Guideline of LED Backlight Table 3 Parameter Guideline for LED Backlight Symbol VLED PLED Parameter LED Input LED Power Consumption PWM Signal Voltage PWM dimming Frequency LED Enable Voltage LED Life Time High Low 30,000 High Low 200 2.0 5 Min. 10.8 4.5 Typ. 12 5 Max. 12.6 7.5 5.5 0.8 20K 5.5 0.8 Units [V] W V V Hz V V Hours Ta=25 Ddim Condition Ta=25 Ta=25℃ ℃ ℃Note B Note B Ta=25VLED_PWMFPWM≥5% ℃VLED_ENLTNote ANote A: The LED life time define as the estimated time to 50% degradation of initial luminous. Note B: A higher LED power supply voltage will result in better power efficiency. Keep the VLED between 12V and 12.6V is strongly recommended. Figure 7 LED Rush Current Measure Condition________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 12/23 02 Issue date 2014/02/12 Revision6.0 Electrical Characteristics6.1 TFT LCD Module Interface Table 4 Connector Name / Designation Item Type / Part Number Mating Model Number DescriptionMSB240420HDP240420 or compatibleTable 5 Signal Pin Assignment Pin #1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20Signal NameVDD VDD VSS REV Rin1Rin1+ VSS Rin2Rin2+ VSS Rin3Rin3+ VSS CIkINCIkIN+ GND Rin4Rin4+ VSS NCDescriptionPower Supply, 3.3V (typical) Power Supply, 3.3V (typical) Ground Reverse Scan selection -LVDS differential data input (R0-R5,G0) +LVDS differential data input (R0-R5,G0) Ground -LVDS differential data input +LVDS differential data input Ground -LVDS differential data input +LVDS differential data input Ground -LVDS differential clock input +LVDS differential clock input Ground -LVDS differential data input +VDS differential data input Ground Not connectRemarksNote________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. Note: IREV = LOW/NCKSN150YP01-A01 Product InformationPage No. 13/23 02Issue date 2014/02/12 RevisionIIREV = High;6.2 LED Interface Connector Table 6 Connector Name / DesignationConnector Name/Designation Manufacturer Connector Model Number Mating Model NumberLED Driver Connector STM or compatible MSB24038P5A or compatible P24038P5A or compatibleTable 7 LED Connector Pin Assignment Pin # 1 2 3 4 5 Symbol Vcc GND Enable Dimming NC Signal Name 12V GND 5V-On / 0V-Off PWM Dimming or Analog Dimming NC________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 14/23 02 Issue date 2014/02/12 Revision7.0 Interface Timings7.1 Timing Characteristics Table 8 Interface TimingsSynchronization Method ： DE only Parameter LVDS Clock Frequency <single > H Total Time H Active Time H Front Porch H Sync Pulse Width H Back Porch H Frequency V Total Time V Active Time V Front Porch V Sync Pulse Width V Back Porch V Frequency Symbol fdck Thp HA Thfp HSPW Thbp fh Tvp VA Tvfp VSPW Tvbp fv Unit MHz clocks clocks clocks clocks clocks kHz lines lines lines lines lines Hz Min. 50 1056 1024 46.32 772 768 Typ. 65 1344 1024 48 32 240 48.36 806 768 3 12 23 60 Max. 80 1720 1024 59.40 990 768 -Note: H Blank area and V Blank area can not be changed at every frame 7.2 Timing Diagram of Interface Signal Figure 8 Timing Characteristics________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 15/23 02 Issue date 2014/02/12 Revision8.0 Power ConsumptionInput power specifications are as follows. Table 9 Power Consumption Symbol VDD IDD PDD Irush VDDrp Parameter Logic/LCD Drive Voltage VDD Current VDD Power Rush Current Allowable Logic/LCD Drive Ripple Voltage Min. 3.0 Typ. 3.3 0.25 Max. 3.6 1.3 3 200 Units [V] [A] [W] [A] [mV]p-p 3.3V/Black pattern Black Pattern, 60Hz Note1 Note 2 ConditionNote 1.Measure Condition Figure 9 VDD rising time________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. Note 2. VDD Power Dip Condition Figure 10 VDD Power Dip KSN150YP01-A01 Product Information Page No. 16/23 02 Issue date 2014/02/12 RevisionIf VTH＜V ≤Vmin，then t ≤10ms；When the voltage return to normal our panelDD dmust revive automatically.________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 17/23 02 Issue date 2014/02/12 Revision9.0 Power ON/OFF SequenceVDD power on/off sequence is as follows. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off. Figure 11 Power SequenceTable 10 Power Sequencing Requirements Parameter VDD Rise Time VDD Good to Signal Valid Signal Disable to Power Down Power Off Signal Valid to Backlight On Backlight Off to Signal Disable VDD Fall Time Symbol Unit T1 T2 T3 T4 T5 T6 T7 ms ms ms ms ms ms ms min 0.5 0 0 1000 300 200 0 Typ. 100 max 10 20 1000________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 18/23 02 Issue date 2014/02/12 Revision10.0 Mechanical Characteristics10.1 Outline Drawing Figure 12 Reference Outline Drawing (Front Side)Figure 13 Reference Outline Drawing (Back Side)________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. 10.2 Dimension Specifications Table 11 Module Dimension Specifications Width [mm] Height [mm] Thickness [mm] Weight [g] KSN150YP01-A01 Product Information Page No. 19/23 02 Issue date 2014/02/12 Revision± 253.5±0.5 12±0.5326.5 0.5930(Typ.) 960(Max)11.0 ReliabilityTable 12 Reliability Test Criteria Items High Temperature Operation Test High Temperature Storage Test Low Temperature Operating Test Low Temperature Storage Test High Temp./High Humidity Operating Test Thermal Shock Non-operation Test Shock Vibration ESD Test Required Condition 70℃, 300hrs 80℃, 300hrs -20℃,300hrs -30℃,300hrs 50 , 85%, 300hrs -20℃~60℃,1hr/each cycle,100cycles 50G,20ms,Half Sine Wave,( X, Note 1℃1.5G , 10~200 Hz , x y z each axis/30min Contact Discharge: ±8KV,150pF(330Ω) ; Air Discharge: ±15KV,150pF(330Ω)、、± ±Y,±Z)Note1: ESD class C: Performance could be recovered by reset if temporary failure happened.________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 20/23 02 Issue date 2014/02/12 Revision12.0 Package SpecificationModuleAntistatic bag 15pcs Module 15pcs PE bag Folding bagModulePut the Module in the bagPut the Silica gel desiccant in the cover Put the modules in the carton Put the top-cover in the cartonSealingC-cover Banding Corner angle pallet Cardboard cartons stacked on palletStretch film15pcs/Carton 12Carton/pallet 180pcs Module/pallet Stacke the pallet:2*3*2 carton C-cover Corner angle pallet Banding15pcs/Carton 30Carton/pallet 450pcs Module/pallet15pcs/Carton 18Carton/pallet 270pcs Module/pallet Stacke the pallet:2*3*3 cartonComponents Material Matrrial Size(mm) Amount (Pcs/Carton)Module 326.5*253.5*12 15Carton 433*370*372 1Antistaticbag 350*330*0.06 15Protect film 317*241*0.1 15Pallet 1150*910*132 --Weight 19Kg 15Pcs Module (include packing)________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 21/23 02 Issue date 2014/02/12 Revision13.0 Lot MarkKSN150YP01A0113.1 Lot Mark 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20Code1,2,4,5,6,7,8,9,10,11,16: KINSOON internal flow control code. Code3: Production location. Code12: Production year. Code13: Production month. Code14, 15: Production date. Code17, 18, 19, 20: Serial number. Note (1) Production YearYear Mark Month Mark 2006 6 Jan. 1 2007 7 Feb. 2 Mar. 3 2008 8 Apr. 4 2009 9 May. 5 2010 A Jun. 6 2011 B Jul. 7 2012 C Aug. 8 Sep. 9 2013 D Oct A 2014 E Nov. B 2015 F Dec. CNote (2) Production Month13.2 23 Product Barcode1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23Code1, 2: Manufacture District. Code3, 4, 5, 6, 7: KINSOON internal module name. Code8, 9, 10, 13, 16: KINSOON internal flow control code. Code11, 12: Cell location Suzhou defined as “SZ”. Code14, 15: Module line Kunshan defined as” KS”. Code17, 18, 19: Year, Month, Day Refer to Note (1) and Note (2) of Lot Mark. Code20~23: Serial Number.________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 22/23 02 Issue date 2014/02/12 Revision14.0 General Precaution14.1 Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 14.2 Handling Precaution (1) Please mount LCD module by using mounting holes arranged in four corners tightly. (2) Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. KINSOON does not warrant the module, if customers disassemble or modify the module. (3) If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid Crystal, and do not contact liquid crystal with skin. If liquid crystal contacts mouth or eyes, rinse out with water immediately. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and Rinse thoroughly with water. (4) Disconnect power supply before handling LCD module (5) Refrain from strong mechanical shock and /or any force to the module. (6) Do not exceed the absolute maximum rating values, such as the supply voltage variation, input voltage variation, variation in parts’ parameters, environmental temperature; etc otherwise LCD module may be damaged. It’s recommended employing protection circuit for power supply. (7) Do not touch, push or rub the polarizer with anything harder than HB pencil lead. Use fingerstalls of soft gloves in order to keep clean display quality, when Persons handle the LCD module for incoming inspection or assembly. (8) When the surface is dusty, please wipe gently with absorbent cotton or other soft Material. When cleaning the adhesives, please use absorbent cotton wetted with a little Petroleum benzene or other adequate solvent. (9) Wipe off saliva or water drops as soon as possible. If saliva or water drops Contact with polarizer for a long time, they may causes deformation or color Fading. (10) Protection film must remove very slowly from the surface of LCD module to Prevent from electrostatic occurrence. (11) Because LCD module uses CMOS-IC on circuit board and TFT-LCD panel, it is Very weak to electrostatic discharge, Please be careful with electrostatic Discharge .Persons who handle the module should be grounded through adequate methods. (12) Do not adjust the variable resistor located on the module. 14.3 Storage Precaution (1) Please do not leave LCD module in the environment of high humidity and high temperature for a long time. (2) The module shall not be exposed under strong light such as direct sunlight.Otherwise, Display characteristics may be changed. (3) The module should be stored in a dark place. It is prohibited to apply sunlight or fluorescent light in storage. 14.4 Operation Precaution (1) Do not connect or disconnect the module in the "Power On” condition. (2) Power supply should always be turned on/off by 9.0 "Power on/off sequence" (3) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference should be done by system manufacturers. Grounding and shielding________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.Suzhou KINSOON Technology Co.,Ltd.Document Title Document No. KSN150YP01-A01 Product Information Page No. 23/23 02 Issue date 2014/02/12 Revisionmethods may be important to minimize the interference. (4) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged. 14.5 Others (1) Ultra-violet ray filter is necessary for outdoor operation. (2) Avoid condensation of water which may result in improper operation or disconnection of electrode. (3) If the module keeps displaying the same pattern for a long period of time, the image may be "sticked" to the screen. (4) This module has its circuitry PCB's on the rear side and should be handled carefully in order not to be stressed. 14.6 Disposal When disposing LCD module, obey the local environmental regulations.________________________________________________________________________All rights strictly reserved reproduction or issue to third parties in any form what ever is not permitted without written authority from the proprietor.。
友达10.4寸液晶屏G104VN01 V1 规格书-杭州旭虹科技有限公司
( V ) Preliminary Specifications( ) Final SpecificationsModule 10.4 Inch Color TFT-LCD Model Name G104VN01 V1Customer DateChecked &Approved byNote: This Specification is subject to changewithout notice. Approved by Date Debbie Chiu2009/02/11 Prepared byVivian Huang 2009/02/11 General Display Business Division / AU Optronics corporationContents1. Operating Precautions (4)2. General Description (5)2.1 Display Characteristics (5)2.2 Optical Characteristics (6)3. Functional Block Diagram (9)4. Absolute Maximum Ratings (10)4.1 Absolute Ratings of TFT LCD Module (10)4.2 Absolute Ratings of Environment (10)5. Electrical Characteristics (11)5.1 TFT LCD Module (11)5.2 Backlight Unit (13)6. Signal Characteristics (14)6.1 Pixel Format Image (14)6.2 Scanning Direction (14)6.3 TFT-LCD Interface Signal Description (15)6.4 The Input Data Format (16)6.5 TFT-LCD Interface Timing (17)6.6 Power ON/OFF Sequence (18)7. Connector & Pin Assignment (19)7.1 TFT-LCD Signal (CN1): LCD Connector (19)7.2 LED Backlight Unit (CN2): Backlight Connector (19)8. Reliability Test Criteria (20)9. Mechanical Characteristics (21)9.1 LCM Outline Dimension (Front View) (21)9.2 LCM Outline Dimension (Rear View) (22)10. Label and Packaging (23)10.1 Shipping Label (on the rear side of TFT-LCD display) (23)10.2 Carton Package (23)11 Safety (24)11.1 Sharp Edge Requirements (24)11.2 Materials (24)11.3 Capacitors (24)11.4 National Test Lab Requirement (24)Version and Date Page Old description New Description0.0 2009/02/03All First Edition1. Operating Precautions1) Since front polarizer is easily damaged, please be cautious and not to scratch it.2) Be sure to turn off power supply when inserting or disconnecting from input connector.3) Wipe off water drop immediately. Long contact with water may cause discoloration orspots.4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped onhard surface.6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handlingTFT-LCD Module.7) Do not open nor modify the module assembly.8) Do not press the reflector sheet at the back of the module to any direction.9) In case if a module has to be put back into the packing container slot after it was takenout from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nortilt the Interface Connector of the TFT Module.11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in avery short time. Please design your display product well to avoid external force applying to module by end-user directly.12) Small amount of materials without flammability grade are used in the TFT-LCD module. TheTFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.13) Severe temperature condition may result in different luminance, response time and lampignition voltage.14) Continuous operating TFT-LCD display under low temperature environment may acceleratelamp exhaustion and reduce luminance dramatically.15) The data on this specification sheet is applicable when LCD module is placed in landscapeposition.16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to usescreen saver or shuffle content periodically if fixed pattern is displayed on the screen.2. General DescriptionThis specification applies to the Color Active Matrix Liquid Crystal Display G104VN01 V1composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support VGA (640(H) x 480(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits).LED driving board for backlight unit is included in G104VN01 V1 and the LED unit is replaceable.All input signals are LVDS interface and compatible with G104SN02 V1.G104VN01 V1 designed with wide viewing angle; wide temperature and long life LED backlight is well suited for industial applications. G104VN01 V1 is a RoHS product.2.1 Display CharacteristicsThe following items are characteristics summary on the table under 25 ℃ condition: ItemsUnitSpecifications Screen Diagonal [inch] 10.4Active Area [mm] 211.2 (H) x 158.4 (V) Pixels H x V 640 x 3(RGB) x 480 Pixel Pitch [mm] 0.33 x 0.33Pixel Arrangement R.G.B. Vertical Stripe Display ModeTN, Normally White Nominal Input Voltage VDD [Volt] 3.3 (typ.) Typical Power Consumption [Watt] 5.4WAll black pattern Weight [Grams] 390 (typ.)Physical Size [mm] 243.0(H) x 176.6(V) x 8.0(D) (typ.) Electrical Interface 1 channel LVDS Surface Treatment Anti-glare, Hardness 3H Support Color16.2M / 262K colors Temperature Range OperatingStorage (Non-Operating) [o C] [o C]-30 to +85 -30 to +85 RoHS ComplianceRoHS Compliance2.2 Optical CharacteristicsThe optical characteristics are measured under stable conditions at 25 (Room Temperature):℃Item Unit Conditions Min. Typ. Max. Remark White Luminance[cd/m2] I F = 80mA/1 LED Line (center point) 330 450 -Note 1 Uniformity % 5 Points 75 - -Note 2, 3 Contrast Ratio500 700 - Note 4[msec]Rising - 10 20 [msec] Falling- 20 30 Response Time[msec] Raising + Falling - 30 50 Note 5 [degree] [degree] Horizontal (Right) CR = 10 (Left) 70 70 80 80 - - Viewing Angle[degree] [degree]Vertical (Upper) CR = 10 (Lower) 50 70 60 80 - - Note 6 Red x TBD TBD TBD Red y TBD TBD TBD Green xTBD TBD TBD Green y TBD TBD TBD Blue x TBD TBD TBD Blue y TBD TBD TBD White x 0.26 0.31 0.36 Color / ChromaticityCoordinates (CIE 1931)White y0.28 0.33 0.38 Color Gamut%-45-Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture1with 50cm viewing distance ∘Test Point CenterEnvironment < 1 luxModule Driving EquipmentNote 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V))Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminanceNote 4: Definition of contrast ratio (CR):Note 5: Definition of response time:The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval isNote 6: Definition of viewing angleViewing angle is the measurement of contrast ratio10, at the screen center, over a 180° horizontal an d ≧180° vertical range (off-normal viewing angles). Th e 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to developMinimum Brightness of five pointsδW9 = Maximum Brightness of five points Contrast ratio (CR)=Brightness on the “White” stateBrightness on the “Black” statethe desired measurement viewing angle.3. Functional Block DiagramThe following diagram shows the functional block of the 10.4 inch color TFT/LCD module:4. Absolute Maximum Ratings4.1 Absolute Ratings of TFT LCD ModuleItem Symbol Min Max Unit Logic/LCD Drive Vin -0.3 +4.0 [Volt]4.2 Absolute Ratings of EnvironmentItem Symbol Min Max Unit Operating Temperature TOP -30 +85 [o C] Operation Humidity HOP 5 95 [%RH] Storage Temperature TST -30 +85 [o C] Storage Humidity HST 5 95 [%RH] Note: Maximum Wet-Bulb should be 39℃ and no condensation.5. Electrical Characteristics 5.1 TFT LCD Module5.1.1 Power SpecificationSymbol Parameter Min Typ Max Units RemarkVDD Logic/LCD Input Voltage 3.0 3.3 3.6 [Volt]I VDD LCD Input Current - 280 - [mA]VDD=3.3V at 60 HZ, all Black PatternP VDD LCD Power comsumption - 0.924 - [Watt] VDD=3.3V at 60 HZ, all Black Pattern I rush LCDLCD Inrush Current-- 1.5[A] Note 1; VDD=3.3VBlack Pattern, Rising time=470usVDD rpAllowable Logic/LCDDrive Ripple Voltage- -100[mV] p-pVDD=3.3V at 60 HZ, all Black PatternNote 1: Measurement condition:VDD rising time0V3.3V5.1.2 Signal Electrical CharacteristicsInput signals shall be low or Hi-Z state when VDD is off.Note: LVDS Signal Waveform.Symbol ItemMin. Typ. Max. UnitRemarkVTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold 100 - - [mV] VCM=1.2V ｜VID ｜ Input Differential Voltage100 400 600 [mV] VICMDifferential Input Common Mode Voltage1.1-1.45[V]VTH/VTL=+-100mV5.2 Backlight Unit5.2.1 Parameter guideline for LCDFollowing characteristics are measured under a stable condition using a inverter at 25℃. (Room Temperature):Symbol Parameter Min.Typ.Max.Unit RemarkVCC Input Voltage 10.8 12 12.6 [Volt]I VCC Input Current - 0.37 - [A] 100% PWM DutyP LED Power Consumption - 4.44 TBD [Watt] 100% PWM DutyI rush LED Inrush Current - - TBD [A] at rising time=470usF PWM Dimming Frequency 200 - 20K [Hz]Swing Voltage 3 3.3 5.5 [Volt]Dimmung duty cycle TBD - 100 %Operation Life 50,000 - - Hrs I F=80mA, Ta= 25o CNote 1: Ta means ambient temperature of TFT-LCD module.Note 2: I F means LED unit forward current.Note 3: VCC, I VCC, I rush LED, P VCC are defined for LED backlight.(100% duty of PWM dimming)Note 4: If G104SN02 V2 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced.Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data.6. Signal Characteristics6.1 Pixel Format ImageFollowing figure shows the relationship between input signal and LCD pixel format.1st2nd639th640th1stLine480thLine6.2 Scanning DirectionThe following figures show the image seen from the front view. The arrow indicates the direction of scan.Fig. 1 Normal scan (Pin4, DPS = Low or NC) Fig. 2 Reverse scan (Pin4, DPS = High)6.3 TFT-LCD Interface Signal DescriptionThe module using a LVDS receiver embaded in AUO’s ASIC. LVDS is a differential signal technology for LCD interface and a high-speed data transfer device.Input Signal Interface Pin No. SymbolDescription 1 VDD Power Supply, 3.3V (typical) 2 VDD Power Supply, 3.3V (typical) 3 GND Ground4 DPS Reverse Scan Function [H: Enable; L/NC: Disable]5 RxIN0-6 RxIN0+ LVDS receiver signal channel 0LVDS Differential Data Input (R0, R1, R2, R3, R4, R5, G0) 7 GNDGround8 RxIN1- 9 RxIN1+ LVDS receiver signal channel 1LVDS Differential Data Input (G1, G2, G3, G4, G5, B0, B1) 10 GND Ground11 RxIN2- 12 RxIN2+ LVDS receiver signal channel 2LVDS Differential Data Input (B2, B3, B4, B5, HS, VS, DE)13 GNDGround14 RxCLKIN- 15 RxCLKIN+ LVDS receiver signal clock 16 GND Ground17 RxIN3-18 RxIN3+ LVDS receiver signal channel 3, NC for 6 bit LVDS InputLVDS Differential Data Input (R6, R7, G6, G7, B6, B7, RSV)19 RSVReserved for AUO internal test. Please treat it as NC.20SEL68 6/ 8bits LVDS data input selection [H: 8bits L/NC: 6bit]Note 1: Input Signals shall be in low status when VDD is off.Note 2: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”. Note 3: RSV stands for “Reserved”.6.4 The Input Data Format6.4.1 SEL68SEL68 =“Low” or “NC” for 6 bits LVDS InputSEL68 = “High” for 8 bits LVDS InputNote1: Please follow PSWG.Note2:R/G/B data 7:MSB, R/G/B data 0:LSB Signal Name DescriptionRemarkR7 R6 R5 R4 R3 R2 R1 R0 Red Data 7Red Data 6Red Data 5Red Data 4Red Data 3Red Data 2Red Data 1Red Data 0Red-pixel DataFor 8Bits LVDS inputMSB: R7 ; LSB: R0For 6Bits LVDS inputMSB: R5 ; LSB: R0G7 G6 G5 G4 G3 G2 G1 G0 Green Data 7Green Data 6Green Data 5Green Data 4Green Data 3Green Data 2Green Data 1Green Data 0Green-pixel DataFor 8Bits LVDS inputMSB: G7 ; LSB: G0For 6Bits LVDS inputMSB: G5 ; LSB: G0B7 B6 B5 B4 B3 B2 B1 B0 Blue Data 7Blue Data 6Blue Data 5Blue Data 4Blue Data 3Blue Data 2Blue Data 1Blue Data 0Blue-pixel DataFor 8Bits LVDS inputMSB: B7 ; LSB: B0For 6Bits LVDS inputMSB: B5 ; LSB: B0RxCLKIN LVDS Data ClockDE Data Enable Signal When the signal is high, the pixel datashall be valid to be displayed.Note: Output signals from any system shall be low or Hi-Z state when VDD is off.NS-like format6.5 TFT-LCD Interface Timing6.5.1 Timing CharacteristicsSignal Symbol Min. Typ. Max. Unit Clock Frequency 1/ T Clock 20 25.2 28.33 MHzPeriod T V 520 525 560 Active T VD -- 480-- Vertical SectionBlankingT VB 40 45 80 T Line Period T H 770 800 900 ActiveT HD-- 640 -- Horizontal SectionBlankingT HB 130160260T ClockNote 1: Frame rate is 60 Hz. Note 2: DE mode.6.5.2 Input Timing DiagramDOTCLKDEHDET VDInput Timing Definition ( DE Mode)Input Data Invaild Data Invaild Data6.6 Power ON/OFF SequenceVDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off.Power ON/OFF sequence timingValueParameterUnitsMin. Typ. Max.T10.5 - 10 [ms]T2 30 40 50 [ms]T3 200 - - [ms]T4 10 - - [ms]T5 10 - - [ms]T6 0 - - [ms]T7 10 - - [ms]T8 100 - - [ms]T9 0 16 50 [ms]T10 - - 10 [ms]T11 1000 - - [ms]The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.7. Connector & Pin AssignmentPhysical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.7.1 TFT-LCD Signal (CN1): LCD ConnectorConnector Name / Designation Signal ConnectorManufacturer STM or compatibleConnector Model Number MSB24013P20HA or compatibleAdaptable Plug P24013P20 or compatiblePin No. Symbol Pin No. Symbol1 VDD2 VDD3 GND4 DPS5 RxIN0-6 RxIN0+7 GND 8 RxIN1-9 RxIN1+ 10 GND11 RxIN2- 12 RxIN2+13 GND 14 RxCKIN-15 RxCKIN+ 16 GND17 RxIN3- 18 RxIN3+19 RSV 20 SEL687.2 LED Backlight Unit (CN2): Backlight ConnectorConnector Name / Designation Lamp ConnectorManufacturer ENTERY or compatibleConnector Model Number 3808K-F05N-02R or compatibleMating Model Number H208K–P05N-02B or compatiblePin No. symbol descriptionPin1 VCC 12V inputPin2 GND GNDPin3 On/OFF 5V-ON,0V-OFFPin4 Dimming PWMPin5 NA8. Reliability Test CriteriaItems Required Condition Note Temperature Humidity Bias 40℃, 90%RH, 300 hoursHigh Temperature Operation 85℃, 300 hoursLow Temperature Operation -30℃, 300 hoursHot Storage 85,℃ 300 hoursCold Storage -30,℃ 300 hoursThermal Shock Test -20/℃ 30 min, 60/℃ 30 min, 100cycles, 40℃ minimun ramp rateHot Start Test 85℃/ 1Hr min. power on/off per 5 minutes, 5 timesCold Start Test -30℃/ 1Hr min. power on/off per 5 minutes, 5 timesShock Test (Non-Operating) 50G, 20ms, Half-sine wave, ( ±X, ±Y, ±Z)Vibration Test (Non-Operating) 1.5G, (10~200Hz, Sine wave)30 mins/axis, 3 direction (X, Y, Z)On/off test On/10 sec, Off/10 sec, 30,000 cyclesESD Contact Discharge: ± 8KV, 150pF(330Ω) 1sec, 8 points, 25 times/pointAir Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointNote 1EMI 30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/mNote1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable. No hardware failures.Note2:Water condensation is not allowed for each test items.Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability.To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance.工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ10. Label and Packaging10.1 Shipping Label (on the rear side of TFT-LCD display)10.2 Carton Package11 Safety11.1 Sharp Edge RequirementsThere will be no sharp edges or comers on the display assembly that could cause injury.11.2 Materials11.2.1 ToxicityThere will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist.11.2.2 FlammabilityAll components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process.The printed circuit board will be made from material rated 94-V1 or better. The actual ULflammability rating will be printed on the printed circuit board.11.3 CapacitorsIf any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards.11.4 National Test Lab RequirementThe display module will satisfy all requirements for compliance to:UL 60950 U.S.A. Information Technology Equipment。
G121X1-L02奇美12.1寸宽温全视角工业液晶屏 -G121X1-L02奇美工控屏
四、奇美 12.1 寸工业液晶屏 G121X1-L02 发光系统
TFT 液晶屏： 灯管位置 光源类型 灯管数量 灯管形状 光源寿命 接口类型 单灯电压 单灯电流 灯管频率 灯管总功率 背光电路 侧入式光源（顶部和底部） CCFL 2 pcs 直条 50K(Min..)(小时) 端子 500± 50V 2.0/8.0/8.5mA (Min./Typ./Max.) 45/80KHz (Min./Max.) 8.0W (Typ.) 无
二：奇美 12.1 寸工业液晶屏 G121X1-L02 结构特征 液晶屏尺寸 点分辨率 像素密度 像素排列 宽高比 点间距 像素间距 面板重量 表面处理 显示区域 可视区域 外观尺寸 外观尺寸 触摸屏 12.1 英寸 1024（RGB)*768（SVGA） 105PPI RGB 垂直条状 4:3 宽:高） 0.080*0.240mm（横*竖） 0.240*0.240mm（横*竖） 700g(Max.) 镜面（Haze 0%），Hard coating (3H) 245.76×184.32 mm (横*竖) 249.0×187.5 mm (横*竖) 260.5×204.0 mm (横*竖) 12.2± 0.5 mm (厚度) 无
TFT 液晶屏：
G121X1-L02 奇美 12.1 寸宽温全视角工业液晶屏 -G121X1-L02 奇美工控屏
一：奇美 12.1 寸工业液晶屏 G121X1-L02 基本信息 面板品牌 液晶屏型号 工作温度 存储温度 作业湿度 保存湿度 当生产状态 奇美（CMO） G121X1-L02 -30~80° C -40~85° C 5-95 (%RH) 5-9 (%RH) 已停产（兼容替代型号可以咨询在线客服）
五、奇美 12.1 寸工业液晶屏 G121X1-L02 信号接口 信号大类 信号小类 面板电压 面板电流 面板功率 接口类型 接口脚距 接口数量 接口脚数 LVDS LVDS (1 ch, 6-bit) 3.3V (Typ.) 510mA (Typ.) 1.68W (Typ.) 端子 1.25mm 1 pcs 20 pins
G121X1-L03 ver 1[1].0
![G121X1-L03 ver 1[1].0](https://img.taocdn.com/s3/m/39fd7220a32d7375a41780f6.png)
20
10
Storage Range
-40 -30 -20
0
20
40
60
80 85
Temperature (ºC)
6 / 28
Version 1.0
Issued Date: Jul 22, 2009 Model No.: G121X1-L03
Preliminary
2.2 ELECTRICAL ABSOLUTE RATINGS
(2) 90 %RH Max. (Ta 40 ºC).
(3) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(4) No condensation.
Relative Humidity (%RH)
100 90 80
60 Operating Range
1.3 APPLICATION - TFT LCD Monitor - Industrial Application - Amusement - Vehicle
1.4 GENERAL SPECIFICATI0NS
Item Diagonal Size Active Area Bezel Opening Area Driver Element Pixel Number Pixel Pitch Pixel Arrangement Display Colors Transmissive Mode Surface Treatment Module Power Consumption
-0.3
18
V
Enable Voltage
EN
---
5.5
V
Backlight Adjust
笔记本液晶屏型号 可互换 修理必备
换屏必备：笔记本液晶屏型号可互换可兼容汇总摘要: 首先让我们学会看液晶屏的型号：以M140NWR2为例; M 代表液晶屏的品牌，常用的品牌有：友达B 三星LTN龙腾M奇美N中华CLAA瀚彩HSD LG LP 等等。
其中140代表尺寸，为14.0英寸，比如LTN156AT02，即为三星15.6英寸的 ...首先让我们学会看液晶屏的型号：以M140NWR2为例; M 代表液晶屏的品牌，常用的品牌有：友达B 三星LTN 龙腾M 奇美N 中华CLAA瀚彩HSD LG LP 等等。
其中140代表尺寸，为14.0英寸，比如LTN156AT02，即为三星15.6英寸的屏幕。
至于屏幕具体的参数，大家可以到屏库这个网站搜索一下，如图所示，能知道液晶屏具体分辨率，尺寸，接口以下是各尺寸液晶屏可代用和兼容型号10.1超薄led液晶屏CLAA101WB03 LP101WH2 TLA2 M101NWT2R0 B101EW01 B101AW06 LTN101NT05 LP101WSBB101AW06 V.1 N101L6-L0D N101LGE-L41 LTN101NT08 HSD101PFW4左右螺丝孔的，10.1寸LED 超薄液晶屏都通用的。
（10.1超薄led，高分屏和普分屏有些机器不支持互换）华硕EPC X101CH笔记本X101H笔记本B101AW06V.4 N101L6-L0D华硕EPC 700 701华硕1008HA 1008HD 联想S100 S110 M13S105 S10 S10E S10-2宏基D255E D257 D260 ACER 宏基PAV70KAV70 方正R100神舟S500华硕EPC 1008P 1025C11.6超薄led液晶屏LTN116AT06 N116BGE-L32 CLAA116WA03A LP116WH2 LTN116AT02 LTN116AT04N116BGE-L41 N116B6-L04 M116NWR1 B116XW03 V.2 B116XW03 V.3 B116XW01 V.0 华硕1225b 1225C X201 X201E 惠普dm1-1119TU dm1-1023TUdm1-1022TU 联想ThinkPad E120 E135 E125 X121E X130E U150 U160S206HP 明基U121戴尔P03T M101Z 戴尔Inspiron 11z DELL戴尔InspironM101z-1120 M11X P03T M102Z 索尼PCG-31311T 31311W 31211T13.3超薄led液晶屏b133xtn01.0 B133XW01 V.0 B133XW01 V.1 B133XW01 v.2 B133XW01v.4 B133XW01 v.5 LP133WH2 LTN133AT27 CLAA133WA01A B133XW03V.0B133XW03 V.1 B133XW03 v.4 B133XW03v.5 N133BGE-L41 N133BGE-L31 LTN133AT16 B133XTN01.0 ltn133at20联想U350 V360 E30 E3 V370 Z370 G370 E320 E325 U360 Y370 U310 V370GZ380 S300 E30 E31华硕UL30 UX30A U31J U35J UL30A SONY S138EC/b S125EC/p S13S9CS118EC/BSONYVPCSD100C VPCSD200C VPCSD300C VPCSD400CSONYVPCS115EC VPCS118EC VPCS119 VPCS119GC VPCS115FG14.0led中厚度液晶屏LP140WH1 B140XW01 HSD140PHW1 N140B6 LTN140AT02 LTN140AT04 HT140WXBHB140WX1 LTN140AT07 BT140GW01 LTN140AT01 LP140WH4 N140BG EM140NWR2 LTN140AT16 LTN140AT22 LTN140AT26 LTN140AT19 B140XW04联想G450 G455 Y450 B450L SL410K G460 E40 B460 B470 B490 B480 G470 G475 B465 Z460 Z470 G465 E430 G460E G480 G485 N480 G400 G450L SL410 E45 B465C Y460C Z475 Z470A B4303 B4305 B4306 B4307 B4308 B4309 B4310 B4311三星：6478 Q430 P428 R42P R467 R468 R463 R470 R440 R420 R464 R428 R430 R425 R423 R439 R429 RV410 RV411 RV415 RV420 R478 R480 E3415 E3420RV408 RV409惠普：CQ42 CQ42X G42 G41 G42 X42 CQ511 CQ510 CQ510CQ541 4411S 4416S 516 515戴尔：M4040 N4010 N4020 N4030 N4050 N4110 N4120 1088 1440 1014 1464 1045 PP42L N4010 1450 1410 N4050 M4020东芝：L600 L630 L535 L538 L537 L551 C600 L510 L700 M503 M505M506 L645华硕：A43SJ X43SJ A42JZ A40JZ X43U X8DIJ F81S X8E X8AC N82X84H X85 K40 K41 K42 X42J K40IN K40I A41E A42E A42J X43S P42A40 N43 A41 K41V K42E X43B X8A X85S A41I X87 F81 F81E X85E K45VDX44H宏基：4741G 4736ZG 4739Z 4743G 4750G 4738ZG 4752 4755G 47414736G 4738G 4835G 4745G 4740G 4735Z 4741Z 4540G 4540 4551G D730 D725 D728 D52514.0led超薄液晶屏LTN140AT06 LTN140AT11 LTN140AT08 LP140WH2 LP140WH3 LTN140AT 20 B140XW03 LTN140AT12 B140XTN02.0 N140B6-L06 N140BGE-L41 H B140WX1-300联想Y460 Y470N U460 Y480A S400 S405 S420 Y470 E420 U410Y480 Y470 Y480 V460 Y471 E425 U400 U410 E460A E42S E430 E425ST420I T420S三星R418 NP300E4A 305v4A 305E4A方正R430IG R430华硕ASUS X401a UL80 U45 X401宏基ACER 4810T AS4820 4820T戴尔V3300V3400 3400 Vostro 3400 清华同方K41H K46A K47A K468 K469 K485X46 K466索尼PCG-61113T PCG-61212T W PCG-61211T15.6led液晶屏B156XW02V2 HT156WXB LP156WH2 LTN156AT02 N156BGE-L21 LP156WH4 LTN15 6AT05 LP156WD1 LTN156AT24LTN156AT09 LTN156AT05 LP156WH2 N156B6-L02/L04/L06 BT156GW01HT156WXBB156XTN02.2 HT156WXB 华硕A53S X53S K53SJ K52DA55XI G51J X54H K51 X56 A53 K54 X55V A55N53SV N53JF VX53SJX53U A53 A53X K53 K53X X54 X54E N53 K50 K52 K53SC K53TK P53 N53 X53S A53SV联想z565 G570 G580 E50 E520 E525 SL510 Z570 B570 V570 B560A V560 Z560 B550 G550 W510 W520 Y560P W510 T510 SL510 G590 G565 V570 G575 G580 G585 Thinkpad E520 E525 E535三星R518 R522 R523 R538 RV515 R528东芝L650 L650D C655 C650 C660 A660 L750 L400 L850惠普HP 4520S DV6 CQ60 CQ61 CQ62 4515s 4525s 4510s戴尔I1555 I1545 F414J M5010 M5030 1545 1555 1564 1556 M5110 M5010 N5110 N5010 N5020神舟K580 A560P K580 K580S K580P宏基ACER 5536 5745 5810T 5820 5742G 5830T 5749 5750g5760 5742 5740G 5935ZG 5538ZG 5738索尼VPCEH-112T VPCEH-111T15.6led超薄液晶屏N156BGE-LB1 B156XW03 LP156WH3 N156B6-L0D B156XW04 LTN1 56AT20 B156XTN03.2 LTN156AT11 N156BGE-L41 CLAA156WA15A LT N156AT29 宏基:5820T 5810T 5820 5625G V5-551 571 MS2361 572 5820TZ 5820TG 5810tz M3-581TG联想:y560 U550 Z500 S5华硕:X501 X501A X501A1X501U K56 S56 K56C X501A A56C X550戴尔:15Z-1569 15r 5521 5523 1528惠普：Envy 6 1215 1001 1005TX 1016TX dv6-7002tx 7045tx g6-1303tx索尼：SVE15 E15118 E15116 SVE15117FJP 微星：MSI X60015 .4 LCD 液晶屏LP154WX2 LP154WE2 LP154WX5 LTN154X3-L09 CLAA154WA05B154EW04 B154EW03 LTN154AT01 N154I5-L02 N154I2-L02 N154X3 LP154EW02LTN154WX2-L01 N154I1-L01 CLAA1154EW04 LP154WX4 LP154W01 B15 4EW08 B154EW01 B154EW02 N154I3-L02 LTN154X3-L02 LP154WX3 LP154W02 LTN154X1LTN154X9 LTN154X2 LTN154AT07 LTN154AT09 CLAA154WA01方正R511神州L3000D L350S L480T L525T L575T HP870宏基5100 5120 1692 3610 3613 E5670 5680 明基A51E A51 A52 A52E A82 A52E A53联想天逸F50 C510 3000 G530 F50A F51A Y810 Y800富士通M1450G AMILO PI2530华硕A6000 X1000 X1400 X53R X50Q X50C X50S X52S 戴尔D800D810 D820 D830 M60 M70 6000 8500 8600 希望对大家有帮助。
LQ035NC111
Page: 6 of 28
VGL -11 -10 -8
V
Vcom High Voltage VcomH
3.7
V
Note1
Vcom low Voltage VcomL
-1.6
V
Note1
Vcom level max
VcomA
6
V
Note1. VcomH& VcomL：Adjust the color with gamma data. Vp-p should be higher then
CONTENTS
No.
ITEM
0
RECORD OF REVISION
1
SUMMARY
2
FEATURES
3
GENERAL SPECIFICATIONS
4
ABSOLUTE MAXIMUM RATINGS
5
ELECTRICAL CHARACTERISTICS
6
DC CHARATERISTICS
7
AC CHARACTERISTICS
2. FEATURES High Resolution: 230,400 Dots (320 RGB x 240). LQ035NC111 is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT LCD panel, driver ICs, FPC and a backlight unit.
天马15寸工业液晶屏TM150TDSG70_Ver1.4规格书-杭州旭虹科技有限公司
Page 2 of 23
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
Global LCD Panel Exchange Center
工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ
Spec
15 inch 1024xRGBx768 a-Si RGB vertical stripe 0.297(H) × 0.297(V) TM with Normally White Anti Glare 12:00 6:00 326.5(H)×253.5 (V) ×11.8 (D) (typ.) 304.128(W) x 228.096 (V) (typ.) Without TSP 1000g(typ.) LED backlight type Replaceable lamp holder for backlight LVDS 1 port 16.7M/262K
This technical specification is subjected to change without notice
Page 1 of 23
Global LCD Panel Exchange Center
Model No.TM150TDSG70
Table of Contents
工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ
Table of Contents ............................................................................................................................ 2 Record of Revision.......................................................................................................................... 3 1 General Specifications.............................................................................................................. 4 2 Input/Output Terminals ............................................................................................................. 5 3 Absolute Maximum Ratings ...................................................................................................... 7 4 Electrical Characteristics .......................................................................................................... 8 5 Dispaly Colors And Input Data Information ............................................................................. 11 6 Timing Chart........................................................................................................................... 13 7 Optical Characteristics.............................................................................................................. 15 8 Environmental / Reliability Test................................................................................................. 18 9 Mechanical Drawing ............................................................................................................... 19 10 Markings ................................................................................................................................ 20 11 Packing Transportation And Delivery........................................................................................21 12 Precautions for Use of LCD Modules........................................................................................23
LCD液晶屏配屏资料
LCD液晶屏配屏资料液晶屏, LCD, 资料AU 170EH_L01 170EH D8B LVDS 30Pin 鑫合基单灯宽口 5V 911B M170E1 OKAU 170EN04 170EH D8B LVDS 30Pin 杨邦军四灯宽口 5V 5020V1.4双LVDSACER_XGA170E3 OKAU AU150XN05 30+45FFC 宇田四灯窄口 3.3V 5020V1.4FFC 150XN05FFC OKAU B150PG01 38D94 D6B LVDS SLN 3.3 MST9011B V1.1 don't make itAU B150XG01 38D94 万信联单灯小口 3.3 ZAN3SL BL150XH6 2006.2.19AU G104SN03 DF19 单灯宽口 5v 50201.3LVDSA 121S1 2004.9.O9 okAU L133X2_3B DF14 科星单灯窄口 3.3V ZAN3V4.0LVDS ITXG72 okAU L150P2 5PCS 91138D94 卓耀单灯窄口 3.3V 9011B 150P2NAU L150P2 91138D94 卓耀单灯窄口 3.3V 9011B L150P2NAU L150P2N 91138D94 卓耀单灯窄口 3.3V 9011B 150P2NAU L150X1M AU80 易唯四灯宽口 5V ZAN34.0TTL L150X1MAU L150X1M_1 AU80PIN AU80pin 3.3v zan3v4.0 LM150X1M_2AU L150X2M_1 AU80 徐小姐双灯 3.3v ZAN34.0TTL NA19020_4040AU L170E3 170EH D8B LVDS 30Pin 四灯宽口 5V 9011B M170E1AU LCA4SE01A 41B 塞维单灯宽口 3.3V ZAN3.V2.0TTL LCA4SE01AAU M150X3 DF14 鑫合基四灯小口 3.3V ZAN3V4.0单lvds M150X3 OK AU M150XN02 AU80 双灯 3.3v ZAN34.0TTL NA19020_4040AU M150XN03 AU80pin 双灯AU M150XN04 FFC30+45 双灯AU M150XN07 DF14 双灯 3.3V ZAN3V4.0LVDS ITXG72AU M150XN07 DF14 宇田单灯窄口 3.3V ZAN3V4.0LVDS M150XN07AU M150XN07(V.2) DF14单八位双灯宽口 3.3 ZAN3SL BL150XH8AU M170E1 170EH D8B LVDS 30Pin 宇田四灯宽口 5V 5020V1.4FFC 1.70E+03OKAU M170EN05 170EH D8B LVDS 30Pin 宇田四灯小口 5V 5020V1.4双LVDS M170EN05AU M190EN02 170EH D8B LVDS 30Pin 四灯小口 5V 9011B 1.70E+03AU UB084 DF19 技博单灯窄口 3.3V gm5020 UB084AU UB104S01_1 DF19 芃峰单灯窄口 3.3V ZAN3V4.0LVDS HSD11SR800X600AU UB133X01 DF1920pin SL 科星单灯窄口 3.3V ZAN3XL UB133X01AU UB141X01 单8bit 单灯窄口 3.3V ZAN3XL UB141X01AU UB141XN03 单8bit 单灯窄口 3.3V ZAN3XL UB141X01CAIJING 31B 超亮四灯宽口 5V 50201.3TTL CAIKJING AVOK VGA抖CAUTION QD15XL02 DF19 徐小姐双灯 3.3v ZAN3V4.0lvds ITXG72CAUTION TM150XG_26L10c 和兴四灯小口 ZAN25.0TMDSChi Mei M150X4_L06 DF19 S8B LVDS 20Pin DLW 3.3 gmZAN3L V4.0 M150X4_L06Chi Mei M150X4_L06 DF19 S8B LVDS 20Pin DLW 3.3 gmZAN3L V4.0 M150X4_L06Chi Mei M150X4_L06 DF19 S8B LVDS 20Pin DLW 3.3 gmZAN3L V4.0 M150X4_L06CHIMEI AA150XC01 FFC36+37 高美四灯小口CHIMEI AA150XN05 FFC30+45 天之骄双灯 5VCHIMEI M141X101 FUJITSU60Pin+VH 和兴双灯 5V ZAN3V4.0TTL NL19020_4040OKCHIMEI M141X101 FUJITSU60Pin+VH 和兴双灯 5V ZAN3V4.0TTL NL19020_4040CHIMEI M141X101 FUJITSU60Pin+VH 和兴双灯 5V ZAN3V4.0TTL NL19020_4040CHIMEI M141X101 FUJITSU60Pin+VH 和兴双灯 5V ZAN3V4.0TTL NL19020_4040CHIMEI M141X101 FUJITSU60Pin+VH CN5第33脚跳到CN4的6脚CN5第25脚跳到CN4的4脚鑫合基双灯 5V ZAN3V4.0TTL NL19020_4040CHIMEI M150X1 FUJITSU60Pin 转接板四灯小口 5V ZAN3V4.0TTL NA19020_4040 CHIMEI M150X3_T05 FUJITSU60Pin 四灯小口 3.3v ZAN34.0TTL NA19020_4040 CHIMEI M150X3_T05 FUJITSU60Pin 塞福特四灯小口 5V 5020TTL NA190104040 CHIMEI M150X3_T05 FUJITSU60Pin 鑫合基四灯小口 5V 50201。
LG未来窗1510S液晶显示器
LG未来窗 1510S液晶显示器
LG未来窗1510S液晶显示器 佚名 【期刊名称】《电脑爱好者》 【年(卷),期】2003(000)017 【摘要】韩国是日本以外的第二大液晶显示器生产国，LG电子则是韩国主要的液晶生产厂商之一。LG 1510S是LG目前市场 上主打的一款15″液晶显示器 【作者】佚名 【作者单位】无 【正文语种】中文 【中图分类】TN873.93 【相关文献】 1.LG未来窗1720B液晶显示器 [J], 2.性感的身段,取巧的设计试用LG L1740BQ液晶显示器有感 [J], 景运 3.尊贵无须彰显——LG L1910B液晶显示器 [J], 4.光影无际——LG L2320A液晶显示器 [J], MTG 5.HPC LA760液晶显示器上市 [J], 以上内容为文献基本信息，获取文献全文请下载
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
SIGNATURE
Name / Title Note
Please return 1 copy for your confirmation with your signature and comments.
Approved By Checked By Prepared By
Version 0.0
5 May 2016
8
-------------------------------------------------------
11
-------------------------------------------------------
12
-------------------------------------------------------
15
-------------------------------------------------------
19
-------------------------------------------------------
23
-------------------------------------------------------
-
(970)
(1010)
g
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) The depth is without connector.
24
-------------------------------------------------------
26
-------------------------------------------------------
27
12. MECHANICAL CHARACTERISTICS
-------------------------------------------------------
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Symbol
Value
Min.
Max.
Unit
Note
Operating Ambient Temperature
TOP
-30
Storage Temperature
TST
-40
+70
℃
+70
℃
Note (1) Temperature and relative humidity range is shown in the figure below.
Specification 304.1 (H) x 228.1(V) (15.0” diagonal)
307.4(H) x 231.3(V) a-Si TFT active matrix
1024 x R.G.B x 768 0.297(H) x 0.297(W) RGB vertical Stripe 16,777,216 / 262,144
times. The module should not be used over the absolute maximum rating value. It will cause
permanently unrecoverable function fail in such an condition.
2. ABSOLUTE MAXIMUM RATINGS 2.1 ABSOLUTE RATINGS OF ENVIRONMENT 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE 2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS 3.1 TFT LCD MODULE 3.2 BACKLIGHT UNIT
4 / 28
PRODUCT SPECIFICATION
1.5 MECHANICAL SPECIFICATIONS
Item
Min.
Horizontal(H)
326.0
Module Size Vertical(V)
253.0
Typ. 326.5 253.5
Max. 327.0 254.0
Unit
Note
+/- 0.5mm
Version 0.0
5 May 2016
The copyright belongs to INNOLUX. Any unauthorized use is prohibited.
5 / 28
PRODUCT SPECIFICATION
2. ABSOLUTE MAXIMUM RATINGS
7. OPTICAL CHARACTERISTICS 7.1 TEST CONDITIONS 7.2 OPTICAL SPECIFICATIONS
8. RELIABILITY TEST CRITERIA
9. PACKAGING 9.1 PACKING SPECIFICATIONS 9.2 PACKING METHOD 9.3 UNPACKING METHOD
Section
Description
All Tentative Specification was first issued.
Version 0.0
5 May 2016
The copyright belongs to INNOLUX. Any unauthorized use is prohibited.
28
Version 0.0
5 May 2016
The copyright belongs to INNOLUX. Any unauthorized use is prohibited.
2 / 28
PRODUCT SPECIFICATION
REVISION HISTORY
Version
Date
Ver. 0.0 09 May 2016
Relative Humidity (%RH) 100 80
60 Operating Range
40
20
Storage Range 10
-40
-20
0
20
40
60
80
Temperature (ºC)
Version 0.0
5 May 2016
The copyright belongs to INNOLUX. Any unauthorized use is prohibited.
1.3 APPLICATION -TFT LCD Monitor - Factory Application - Amusement - Vehicle
1.4 GENERAL SPECIFICATI0NS Item
Active Area Bezel Opening Area Driver Element Pixel Number Pixel Pitch Pixel Arrangement Display Colors Display Mode Surface Treatment Module Power Consumption
PRODUCT SPECIFICATION
■ Tentative Specification □ Preliminary Specification □ Approval Specification
MODEL NO.: G150XNE SUFFIX: L03
Customer: APPROVED BY
The copyright belongs to INNOLUX. Any unauthorized use is prohibited.
1 / 28
PRODUCT SPECIFICATION
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION 1.1 OVERVIEW 1.2 FEATURES 1.3 APPLICATION 1.4 GENERAL SPECIFICATIONS 1.5 MECHANICAL SPECIFICATIONS
3
-------------------------------------------------------
4
-------------------------------------------------------
6
-------------------------------------------------------
mm (1)
mm
Depth(D)
-
Horizontal Bezel Area
Vertical
307.1 231.0
307.4 231.3
307.7
mm
-
231.6
mm
Horizontal
-
304.1
-
mm
Active Area
Vertical
-
228.1
-
mm
Weight
4. BLOCK DIAGRAM 4.1 TFT LCD MODULE
5. INPUT TERMINAL PIN ASSIGNMENT 5.1 TFT LCD MODULE 5.2 BACKLIGHT UNIT 5.3 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING 6.1 INPUT SIGNAL TIMING SPECIFICATIONS 6.2 POWER ON/OFF SEQUENCE 6.3 SCANNING DIRECTION