力士乐齿轮泵样本

10 17 27 34 43 51 61 71 82 100 F
B
Flange SAE B (SAE J744C)
O
Pressure Ports O-ring Ports to SAE J1926 (ISO 11926)
Suction Ports Flange face to SAE J518
Direction of rotation: Clockwise Counterclockwise
Pressure p2 in PSI (bar)
Nominal Size 82
Flow Q in GPM (L/min)
Power in Hp (kW)
Pressure p2 in PSI (bar)
Pressure p2 in PSI (bar)
5
HU 8001
Performance Data
Nominal Size 100
Functional Description
The gear Pumps Series GP1-Q consists of 2 intermeshing gears (1), one of them connected to the drive shaft. Right or Left hand rotation on the drive shaft generates pressure and flow as given in the technical data section on page 2. The pumps have optimized efficiency through pressurized internal sealing technology (2). The floating bushings (3) with special bearings (4) are pressure dependent pushed against the gears which guarantee minimum gap clearance between bushing and gears thereby sealing the gears axially. The radial sealing is done by forcing the gears against the body. The gear pumps have 2-Bolt SAE mounting flange (5) and keyed shaft. Pressure port is SAE O-Ring Port and Suction ports are SAE - Flange Ports.
Flow Q in GPM (L/min)
Power in Hp (kW)
Pressure p2 in PSI (bar)
Pressure p2 in PSI (bar)
4
HU 8001
Performance Data
Nominal Size 61
measured at n = 166 SUS (35 mm .s ) and t = 122°F ( 50°C)
Q - series gear pumps
GP1- Q
HU 8001 10/2001
Pmax 2900 to 4500 PSI • Qmax 7.1 to 42.8 GPM
q q q q
High reliability High dimensional and general effect Low noise level in whole operating range High volumetric efficiency
2 -1
Outlet flow in relation to power demand and outlet pressure
Flow Q in GPM (L/min)
Power in Hp (kW)
Pressure p2 in PSI (bar)
Pressure p2 in PSI (bar)
Nominal Size 17
Pressure p2 in PSI (bar)
Pressure p2 in PSI (bar)
Nominal Size 43
Flow Q in GPM (L/min)
Power in Hp (kW)
Pressure p2 in PSI (bar)
Pressure p2 in PSI (bar)
Nominal Size 51
Petroleum oils HM, HV, according CETOP RP 91 H Viscosity classes SO VG 32, 46 and 68 +5 to +158 98 to 1840 Class 21/18/15 according to ISO 4406 (1999) -4 to +131 21.83 22.60 23.24 24.45 25.09 25.73 (9.90) (10.25) (10.54) (11.09) (11.38) (11.67) any
Pressure rating on the Q - series gear pumps in relationship to revolutions
Pressure p2 in PSI (bar)
n (r.p.m.)
6
HU 8001
Pump Dimenions
Dimensions in inches
* at nominal speed and maximum continuous pressure ** at maximum speed and maximum pressure 2
HU 8001
Performance Data
Nominal Size 10
measured at n = 166 SUS (35 mm .s ) and t = 122°F ( 50°C)来自
1
HU 8001
Order Code GP1- Q
Gear pump no designation Series Nominal displacement 3 0.610 cinch/rev (10cm /rev) 3 1.037 cinch/rev (17cm /rev) 3 1.648 cinch/rev (27cm /rev) 3 2.075 cinch/rev (34cm /rev) 3 2.624 cinch/rev (43cm /rev) 3.112 cinch/rev (51cm3/rev) 3 3.723 cinch/rev (61cm /rev) 3 4.333 cinch/rev (71cm /rev) 3 5.004 cinch/rev (82cm /rev) 3 6.102 cinch/rev (100cm /rev) Seals NBR (Other upon request)
+7.25 - 4.35
14.318 18.096 21.477 25.676 22.719 25.625 30.380 28.795 44.254 54.043 59.00 65.308
HP 12.605 HP 19.713
75.097 81.132 87.166 77.109 min. 0.9 min. 0.8
Note: The right hand rotation pump is drawn, the inlet and outlet ports of left hand rotation pump are interchanged.
Table of dimensions
CODE Displ. in3/1 (cm3/1) 0.610 (10.0) 1.037 (17.0) 1.648 (27.0) 2.075 (34.0) 2.624 (43.0) 3.112 (51.0) 3.723 (61.0) 4.333 (71.0) 5.004 (82.0) 6.102 (100.0) Nominal Pressure PSI (bar) 3916 (270) 4206 (290) 4206 (290) 4061 (280) 3916 (270) 3624 (250) 3334 (230) 3044 (210) 2611 (180) 2611 (180) Dimension ( " ) A 2.441 2.677 3.012 3.228 3.524 3.799 4.134 4.468 4.823 5.276 B 3.425 3.661 3.997 4.213 4.508 4.783 5.118 5.453 5.807 6.713 C 6.772 7.008 7.343 7.559 7.854 8.130 8.465 8.799 9.154 10.060 D 1.031 1.031 1.031 1.031 2.311 2.752 2.752 2.752 2.752 2.752 E 2.063 2.063 2.063 2.063 1.189 1.406 1.406 1.406 1.406 1.406 F 1.000 1.000 1.000 1.000 1.205 1.457 1.457 1.457 1.457 1.457 H M10x1.5 M10x1.5 M10x1.5 M10x1.5 J 1-1/16-12UN-2B 1-1/16-12UN-2B 1-1/16-12UN-2B 1-5/16-12UN-2B K 1.622 1.622 1.622 1.937 1.937 1.937 1.937 1.937 1.937 1.937 7
Flow Q in GPM (L/min)
Power in Hp (kW)
Pressure p2 in PSI (bar)
Pressure p2 in PSI (bar)
Nominal Size 27
Flow Q in GPM (L/min)
Pressure p2 in PSI (bar)
Power in Hp (kW)
Pressure p2 in PSI (bar)
3
HU 8001
Performance Data
Nominal Size 34
measured at n = 166 SUS (35 mm .s ) and t = 122°F ( 50°C)
2 -1
Flow Q in GPM (L/min)
Power in Hp (kW)
R L
K7
Cylindrical Keyed Shaft 7/8
Technical Data
Nominal series specifications Nominal displacement Speed - nominal maximum minimum Pressure on the inlet -nominal maximum minimum Pressure on the outlet max.continuous maximum Nominal outlet flow (min.)* Max. flow ** Power demand-nominal(max.)* Max. Power demand ** Efficiency - hydraulic total Pressure fluid Fluid temperature range (operating) Operating viscosity range Maximum degree of fluid contamination Ambient temperature range Mass Mounting position °F lb (kg) 17.09 (7.75) 19.84 (9.00) 20.28 (9.20) 20.94 (9.50) °F SUS GPM GPM PSI 3916 4206 4.200 7.133 4206 4496 7.133 12.152 23.066 41.572 4206 4496 11.359 19.020 36.476 65.710 4061 351 3916 4206 3624 3916 3334 3624 3044 3334 29.904 30.380 69.063 73.756 2611 2901 34.607 34.870 69.063 77.779 2611 2901 42.135 42.796 83.814 95.212 PSI RPM cinch Q 10 0.610 1750 3000 600 Q 17 1.037 1750 3000 600 Q 27 1.648 1750 3000 600 Q 34 2.075 1750 2800 600 Q 43 2.624 1750 2500 600 Q 51 3.112 1750 2500 500 Q 61 3.723 1750 2000 500 Q 71 4.333 1750 1800 500 Q 82 5.004 1750 1800 500 Q 100 6.102 1750 1800 500
2 -1
Flow Q in GPM (L/min)
Pressure p2 in PSI (bar)
Power in Hp (kW)
Pressure p2 in PSI (bar)
Nominal Size 71
Flow Q in GPM (L/min)
Power in Hp (kW)
Pressure p2 in PSI (bar)
measured at n = 166 SUS (35 mm .s ) and t = 122°F ( 50°C)
2 -1
Flow Q in GPM (L/min)
Pressure p2 in PSI (bar)
Flow Q in GPM (L/min)
Pressure p2 in PSI (bar)