空气消毒机的说明书
巨光等离子空气消毒机说明书s一800
![巨光等离子空气消毒机说明书s一800](https://img.taocdn.com/s3/m/0dc530e8250c844769eae009581b6bd97f19bc8d.png)
巨光等离子空气消毒机说明书s一800一、产品简介巨光等离子空气消毒机s一800是一种高效、安全的空气净化设备,采用等离子杀菌技术,能够有效去除空气中的细菌、病毒、霉菌等有害物质,为室内提供清新、健康的空气环境。
二、使用步骤1. 打开电源开关,机器将自动启动。
2. 按下“电源”按钮,选择“自动”模式,机器将自动检测室内空气质量并启动相应的工作程序。
3. 通过“设置”按钮,可以手动设置机器的工作时间、空气质量等级等参数。
4. 当空气质量达到最佳时,机器将自动停止工作。
三、注意事项1. 机器应放置在通风良好的室内空间,避免阳光直射。
2. 不要在机器附近放置易燃、易爆物品。
3. 不要用水清洗机器,以免发生电气故障。
4. 在使用过程中,不要随意拆卸、修理机器。
四、故障排除1. 如果机器出现故障,请首先关闭电源,然后联系专业维修人员进行检修。
2. 如果空气质量指示灯一直处于红色状态,可能是机器需要清洁或需要更换过滤网。
3. 如果机器出现噪音或异常振动,请立即停止使用并联系售后服务中心。
五、维护保养1. 定期清洗或更换过滤网,以保证机器的净化效果。
2. 定期检查机器的电源线是否破损,以免发生安全事故。
3. 如果机器长时间不使用,应将其存放于干燥、通风的地方。
六、安全性本产品符合国家相关安全标准,通过权威机构的安全检测,确保使用安全。
七、环保规范1. 本产品在使用过程中,能够有效减少室内空气中的细菌、病毒、霉菌等有害物质,对改善室内环境质量具有积极作用。
2. 使用本产品可以降低室内空气污染物的含量,减少病毒传播的风险,有利于保障公众的健康安全。
3. 请遵守相关环保法规,合理使用本产品,避免不必要的浪费和污染。
总之,巨光等离子空气消毒机s一800是一款高效、安全、环保的空气净化设备,能够提供清新、健康的室内空气环境。
在使用过程中,请注意相关安全事项,遵循环保规范,确保设备的正常运转和环境的健康安全。
如有任何问题或需要进一步了解,请随时联系我们的客服部门。
等离子空气消毒机使用说明
![等离子空气消毒机使用说明](https://img.taocdn.com/s3/m/1f04639d5122aaea998fcc22bcd126fff7055da4.png)
等离子空气消毒机使用说明等离子空气消毒机使用说明1. 引言对于当今全球面临的各种病菌和病毒传播问题,消毒和净化空气的需求越来越重要。
等离子空气消毒机作为一种新兴的消毒技术,通过产生高浓度的负离子和活性氧分子,可以有效杀灭空气中的各类细菌、病毒和有害气体。
本文将详细介绍等离子空气消毒机的使用方法和注意事项,以帮助用户更好地使用和操作。
2. 等离子空气消毒机的基本原理等离子空气消毒机利用电场强化放电原理产生等离子体,通过与空气中的分子发生碰撞,引发一系列的化学反应,包括电子交换和能量转移等过程,从而释放出负离子和活性氧分子。
负离子和活性氧分子具有强氧化性和杀菌作用,可以迅速杀灭空气中的有害微生物和污染物。
3. 使用前的准备在使用等离子空气消毒机之前,首先确保设备的正常工作状态。
检查电源线是否连接牢固,设备是否放置在稳定的表面上,并确保周围没有易燃物品。
另外,检查并保持设备与墙壁或其他物体之间的适当距离,以充分发挥设备的效果。
4. 正确的操作方法a. 开启设备使用者应按下设备上的电源开关,确认设备通电。
通常,设备会发出指示灯或声音提示,表示已开启。
b. 调整模式和风速等离子空气消毒机通常具有多种工作模式和风速可选择。
用户可以根据实际需求选择适合的模式和风速设置。
通常情况下,高风速模式适用于较大空间,而低风速模式适用于较小空间。
c. 定期清洁和更换滤网滤网是等离子空气消毒机的重要组成部分,用于过滤和吸附空气中的颗粒物和污染物。
用户应定期清洁滤网,并根据使用情况定期更换。
清洁滤网时,应先将设备断电,并使用清水或中性洗涤剂轻轻清洗,并晾干后再安装回设备中。
d. 使用时注意安全在使用等离子空气消毒机期间,应注意人员安全。
请避免将手指或其他物体插入设备的进气或出气口,以免发生意外事故。
对于有过敏史的人群,如哮喘患者,应在使用时保持适当距离,并根据医生建议进行操作。
5. 使用注意事项a. 儿童和宠物在使用等离子空气消毒机时,应将设备放置在儿童和宠物无法触及的地方,以免发生意外伤害。
空气消毒机的使用流程
![空气消毒机的使用流程](https://img.taocdn.com/s3/m/baae5d73f6ec4afe04a1b0717fd5360cba1a8dfb.png)
空气消毒机的使用流程1. 准备工作在使用空气消毒机之前,需要进行一些准备工作。
•确保空气消毒机处于正常工作状态。
•打开空气消毒机的电源开关。
•检查空气消毒机内的消毒剂是否充足。
•将空气消毒机放置在需要消毒的空间内,并保持通风良好。
2. 开始消毒一切准备就绪后,可以开始进行空气消毒的操作。
1.调整消毒机的工作模式:根据需要选择合适的工作模式,如普通模式、强力模式等。
2.设定消毒机的工作时间:根据需求设定消毒机的工作时间,通常建议至少30分钟以上。
3.设置消毒机的工作范围:根据空间的大小,调整消毒机的工作范围,确保整个空间都能得到充分的消毒。
4.开始消毒:按下消毒机上的启动按钮,开始进行空气消毒。
3. 使用注意事项在使用空气消毒机时,需要注意以下事项:•不要在空气消毒机工作时进入消毒区域,以免对人体造成伤害。
•在消毒过程中,尽量保持空间内没有人员,以免干扰消毒效果。
•在空气消毒机工作期间,保持通风良好,确保消毒剂能够充分扩散到整个空间。
•消毒机使用完毕后,及时关闭电源开关,避免长时间运行消耗资源。
4. 维护和保养为了保证空气消毒机的正常工作和延长其使用寿命,需要进行一些维护和保养工作。
•定期检查消毒剂的储存情况,并及时补充消毒剂。
•清洁空气消毒机的滤网和其他零部件,确保其处于干净的状态。
•定期检查空气消毒机的电源线和连接线,确保其没有损坏或老化。
•如发现故障或异常情况,及时联系专业人员进行检修和维修。
5. 安全警示在使用空气消毒机时,应注意以下安全事项:•请勿将空气消毒机放置在易燃易爆物品旁边,以防发生火灾或其他安全事故。
•严禁将空气消毒机放置在高温、潮湿或阳光直射的地方。
•不要将空气消毒机的电源线绕在其他物体上或遮挡住。
•如空气消毒机发生异常情况,如发热、冒烟等,请立即停止使用并联系专业人员。
以上就是空气消毒机的使用流程,通过合理的准备工作、正确的操作步骤,以及维护和保养的注意事项,可以保证空气消毒机的正常工作和消毒效果。
才风科技消毒机使用说明书
![才风科技消毒机使用说明书](https://img.taocdn.com/s3/m/5884ff94d05abe23482fb4daa58da0116c171f01.png)
才风科技消毒机使用说明书尊敬的用户,感谢您选择才风科技消毒机!为了让您更好地使用本产品,以下为您详细介绍产品特点、使用方法以及注意事项等内容。
一、产品简介才风科技消毒机是一款集消毒、杀菌、净化于一体的智能家居设备。
本产品采用先进的紫外线消毒技术,结合高效活性氧离子技术,有效消灭空气中的细菌、病毒和有害物质,为您的家庭营造一个健康、安全的生活环境。
二、产品特点1.高效杀菌:才风科技消毒机采用紫外线消毒技术,对空气中的细菌、病毒等有害生物进行快速杀灭,保障家人健康。
2.活性氧离子净化:本产品释放的高效活性氧离子可有效去除甲醛、苯、TVOC等装修污染物,让您呼吸新鲜空气。
3.智能控制:支持手机APP远程操控,随时随地调整消毒时间,实现无人值守自动消毒。
4.安全防护:具备多重安全保护措施,确保产品在使用过程中不会对人员和设备造成损害。
三、使用方法1.开机前,请确保产品插头正确插入电源插座,同时打开产品开关。
2.按下遥控器或手机APP启动消毒功能,设备将开始工作。
3.根据需要,可调整消毒时间和消毒模式。
4.消毒结束后,设备会自动关闭,请及时断开电源以确保安全。
四、注意事项1.请勿在消毒机工作时靠近设备,以免对人体造成伤害。
2.保持设备周围空气流通,以提高消毒效果。
3.避免将消毒机放置在潮湿、高温、阳光直射的环境中。
4.定期清理消毒机内部,确保设备正常工作。
五、清洁与维护1.每周用湿布擦拭设备表面,去除灰尘和污垢。
2.每月检查紫外线灯管和活性氧离子发生器,如有损坏,请及时更换。
3.定期检查电源线和插头,确保连接牢固。
六、故障处理1.若设备无法正常启动,请检查电源线和插头是否连接牢固。
2.若消毒机运行中突然停止,请检查电源是否正常供电,如有异常,请切断电源后重新启动。
3.如遇其他故障,请联系售后服务人员。
七、售后服务才风科技为您提供一年内免费保修服务,如有任何产品质量问题,请随时联系售后客服,我们将竭诚为您解决。
净可家空气消毒机说明书
![净可家空气消毒机说明书](https://img.taocdn.com/s3/m/4e4368d46aec0975f46527d3240c844769eaa012.png)
净可家空气消毒机说明书摘要:1.引言:介绍净可家空气消毒机的背景和重要性2.净可家空气消毒机的工作原理3.净可家空气消毒机的使用步骤4.净可家空气消毒机的注意事项5.净可家空气消毒机的维护和清洁6.结论:总结净可家空气消毒机的特点和优势正文:【引言】随着人们对健康和环境问题的关注日益增加,空气净化器已经成为了家庭中必不可少的设备。
净可家空气消毒机是一款具有高效消毒功能的空气净化器,不仅能够有效去除空气中的细菌和病毒,还能够去除甲醛、苯等有害气体,为家庭提供健康、舒适的呼吸环境。
【净可家空气消毒机的工作原理】净可家空气消毒机采用先进的光催化技术和臭氧发生技术,对空气中的细菌、病毒和有害物质进行分解和消毒。
光催化技术利用特定波长的紫外线照射空气中的有害物质,使其分解为无害的气体;臭氧发生技术则通过产生臭氧气体,对空气中的细菌和病毒进行氧化分解,从而达到高效消毒的目的。
【净可家空气消毒机的使用步骤】1.将净可家空气消毒机放置在需要消毒的房间中,确保空气流通;2.插上电源,打开机器开关;3.根据需要,选择合适的工作模式,如自动模式、睡眠模式等;4.机器开始运行,对空气中的有害物质进行消毒和净化。
【净可家空气消毒机的注意事项】1.净可家空气消毒机适用于无人环境下使用,避免对人体造成伤害;2.不要将机器放置在潮湿、高温或者阳光直射的环境中;3.不要在机器周围放置易燃、易爆物品;4.长时间不使用时,请将机器断电并妥善保管。
【净可家空气消毒机的维护和清洁】1.定期更换滤网,以确保空气净化效果;2.使用湿布擦拭机器表面,避免使用有刺激性的清洁剂;3.长时间不使用时,请将机器内部的臭氧发生器关闭,以延长使用寿命。
【结论】净可家空气消毒机凭借其高效的消毒功能、简洁的外观设计和易用的操作方式,成为了家庭中理想的空气净化设备。
迈尔消毒机说明书
![迈尔消毒机说明书](https://img.taocdn.com/s3/m/66ff4af368dc5022aaea998fcc22bcd126ff4219.png)
迈尔消毒机说明书摘要:一、引言二、迈尔消毒机的工作原理三、迈尔消毒机的使用方法1.准备工作2.操作步骤四、迈尔消毒机的维护与保养1.清洁与保养2.常见问题及解决方法五、迈尔消毒机的注意事项六、总结正文:【引言】随着科技的发展和人们对健康意识的不断提高,消毒设备已成为生活中不可或缺的一部分。
今天,我们将为您详细介绍一款备受好评的迈尔消毒机,让您更好地了解这款产品的性能、使用方法和注意事项。
【迈尔消毒机的工作原理】迈尔消毒机采用先进的紫外线消毒技术,通过紫外光照射空气中的微生物,破坏其DNA 结构,使其失去繁殖能力,从而达到消毒的目的。
此外,迈尔消毒机还配备了HEPA 过滤网,可以有效过滤空气中的颗粒物,如病毒、细菌、花粉等,为您提供更加洁净的空气。
【迈尔消毒机的使用方法】1.准备工作在使用迈尔消毒机之前,请确保将其放置在通风良好的环境中,并确保电源线连接稳定。
同时,请定期更换HEPA 过滤网,以保证消毒效果。
2.操作步骤(1)打开消毒机:按下消毒机顶部的电源按钮,开启消毒机。
(2)设置工作模式:根据您的需求,选择消毒机上的工作模式,如定时模式、自动模式等。
(3)关闭消毒机:在完成消毒任务后,请及时关闭消毒机,避免长时间运行导致设备过热。
【迈尔消毒机的维护与保养】1.清洁与保养建议每天使用消毒机前,用湿布擦拭机身外壳,保持清洁。
HEPA 过滤网需要定期更换,具体更换时间请参考产品说明书。
2.常见问题及解决方法(1)消毒机无法启动:请检查电源线是否连接良好,电源插座是否正常工作。
(2)消毒机运行时噪音较大:请检查设备是否摆放平稳,过滤网是否安装正确。
(3)消毒效果不佳:请检查HEPA 过滤网是否需要更换,环境是否通风良好。
【迈尔消毒机的注意事项】1.请勿直视紫外线光源,以免对眼睛造成伤害。
2.请勿在紫外线消毒过程中打开消毒机,以免造成人身伤害。
3.请将消毒机放置在儿童无法触及的地方,以免发生意外。
【总结】迈尔消毒机凭借其先进的消毒技术和便捷的操作方式,已成为众多消费者的首选。
空气消毒机的使用操作规程
![空气消毒机的使用操作规程](https://img.taocdn.com/s3/m/a70f3ad9846a561252d380eb6294dd88d0d23d08.png)
空气消毒机的使用操作规程
1.目的建立臭氧空气消毒机操作规程。
2.范围病区药房药品分装室。
3.责任者病区药房负责人。
4.程序
1)使用方法
1)消毒前,应关闭门窗,避免空气流通,消毒场地最好先拖地,使消毒场所具有一定的湿度,确保消毒效果。
2)开机30分钟,额定消毒空间为45m3,臭氧浓度可达2.27mg/m3,对白色葡萄球菌的杀灭率达到99.99%;开机60分钟,臭氧浓度可达3.87mg/m3,对空气中自然菌的杀灭率达到92.3%3)开启空气消毒机,将定时器旋钮控在60分钟一挡(时间长,消毒效果相应提高),到时自动停机,即达消毒要求。
(2)注意事项。
空气消毒机的设置和使用
![空气消毒机的设置和使用](https://img.taocdn.com/s3/m/7c4f75f8e2bd960591c6777d.png)
.....................最新资料整理推荐.....................
空气消毒机的设置和使用
1、接通电源,打开消毒机总电源开关,本机进入待机状态,此时“电源”指示灯亮启。
2、循环按动控制面板上的“定时”按键选择需要的消毒时间可选择1小时、2小时、3小时、4小时“运行”指示灯亮启。
3、消毒机运行至预设时间值时将会自动停机,也可以根据需要用遥控器选择遥控消毒和程控消毒。
注意事项
1、消毒时应关闭门窗
2、为保证消毒效果,消毒时间应≥120min
3、因本机使用紫外线循环风进行消毒,所以机器周围空气应保持畅通,无物体阻挡。
4、搬运和装卸时应特别注意,勿使本机受到硬质物体撞击或倒地
5、使用中发现异常,如有异味或灯管被损坏等现象,需要处理时,应立即关闭本机电源开关并拔出电源插头。
6、本机由专职人员使用。
7、连续使用累计时间达1000小时,应清洗过滤布、初效、和紫外线灯管。
1。
中国电科空气消毒机说明书
![中国电科空气消毒机说明书](https://img.taocdn.com/s3/m/e250deccb8d528ea81c758f5f61fb7360b4c2b32.png)
中国电科空气消毒机说明书摘要:一、引言二、产品概述1.产品名称2.产品型号3.产品特点三、产品功能1.空气净化2.空气消毒3.空气湿度调节四、产品规格1.尺寸2.重量3.功率五、使用方法1.开机操作2.关机操作3.日常维护六、注意事项1.安全提示2.环境要求3.防止误操作七、故障处理1.常见故障及原因2.故障处理方法3.故障排除流程八、售后服务1.保修政策2.维修服务3.客服联系方式九、附录1.技术参数2.产品彩页3.相关证书正文:一、引言在这个空气质量日益受到关注的时代,中国电科空气消毒机的诞生为我们的生活带来了福音。
为了帮助广大用户更好地了解和使用本产品,我们特制定本说明书,旨在为大家提供详细的产品信息和使用方法。
二、产品概述1.产品名称:中国电科空气消毒机2.产品型号:XXX3.产品特点:本产品采用高性能复合滤网,具备空气净化、消毒、湿度调节等功能,有效保障室内空气质量。
三、产品功能1.空气净化:采用高效活性炭吸附技术,去除甲醛、苯、TVOC等有害气体,净化室内空气。
2.空气消毒:采用紫外线消毒技术,有效杀灭空气中的细菌、病毒,保障家人健康。
3.空气湿度调节:智能湿度控制,自动调节室内湿度,营造舒适生活环境。
四、产品规格1.尺寸:XXXmm2.重量:XXXkg3.功率:XXXW五、使用方法1.开机操作:将电源线插入插座,打开开关,设备开始工作。
2.关机操作:关闭开关,拔掉电源线,设备停止工作。
3.日常维护:定期清理滤网,保持设备正常运行。
六、注意事项1.安全提示:请勿将本机放置在潮湿、高温、阳光直射的地方,避免儿童触及。
2.环境要求:使用环境温度5-35℃,湿度不超过80%。
3.防止误操作:使用时请勿遮挡开关和显示屏,以免影响正常运行。
七、故障处理1.常见故障及原因:电源故障、滤网堵塞、机器内部故障等。
2.故障处理方法:检查电源线、更换滤网、联系售后服务等。
3.故障排除流程:关闭电源,检查故障原因,按照说明书进行处理。
医用空气消毒机使用方法
![医用空气消毒机使用方法](https://img.taocdn.com/s3/m/3d7d005de55c3b3567ec102de2bd960590c6d97b.png)
医用空气消毒机使用方法
1、北京时间设置:
将遥控器发射窗对着消毒机上遥控按受窗,按动“时钟”按键,中文液晶显示屏上“时钟显示”区域的小时开始闪动,按动遥控器上“+”“—”按键设置小时;再次按动“时钟”按键可设定分钟。
2、手动消毒时间设置(一次消毒时间以2小时为宜)
A、用遥控器设置手动消毒时间:将遥控器发射窗对着消毒机上遥控接收窗口,在遥控器消毒时间设置区选择消毒时间。
机器开如工作。
B、用控制面板设置手动消毒时间:当机器处于待机状态,按动控制面板上的“1小时”“2小时”按键,显示所设置的工作时间,机器开始工作。
3、程控消毒时间设置:
A、按动遥控器上的“程控”按键,1组开机时间的小时开始闪动,按动“+”“—”键调整小时,再次按动程控键,1组开机时间的分钟开始闪动,按动“+”“—”键调整分钟,循环按动“程控”设置
1 组关机时间及其它几组开关机时间。
B、设置好程控工作时间后,应按动遥控器上的“程控开”使中文液晶显示屏上显示“程控开”,消毒机才会按设定的时间自动运行。
C若要将程控消毒时间恢复为出厂默认设置,请按动遥控器上的“默认设置”键。
出厂默认消毒时间为:06:00~08:00、12:00~13:00、20:00~22:00.。
医用移动空气消毒机的使用方法及注意事项
![医用移动空气消毒机的使用方法及注意事项](https://img.taocdn.com/s3/m/0dd358c1a1116c175f0e7cd184254b35eefd1a07.png)
医用移动空气消毒机的使用方法及注意事项医用移动空气消毒机是医院、实验室、手术室等场所常见的一种设备,主要用于消毒空气中的细菌、病毒等有害微生物,保障空气的洁净度。
在使用医用移动空气消毒机时,需要注意一些使用方法及注意事项,以确保消毒效果和安全性。
下面将详细介绍医用移动空气消毒机的使用方法及注意事项。
一、医用移动空气消毒机的使用方法:1.确认消毒目标区域:在使用医用移动空气消毒机之前,需要确认消毒的目标区域,根据实际需要确定设备的摆放位置和消毒时间。
2.设备准备:打开医用移动空气消毒机的电源开关,确认设备正常启动,检查设备的滤网、紫外线灯等部件是否损坏或缺失,保证设备完好无损。
3.调整消毒参数:根据消毒的环境和对象选择合适的消毒参数,如消毒时间、消毒模式等,并将参数设定在合适的范围内。
4.启动消毒过程:确认消毒参数设置无误后,启动医用移动空气消毒机,让设备开始工作。
5.监控消毒过程:在消毒过程中,可以通过设备的显示屏或其他监控装置观察消毒情况,确保消毒效果。
6.消毒结束:消毒结束后,关闭医用移动空气消毒机,清理设备的滤网、紫外线灯等部件,将设备存放在干燥通风的地方。
二、医用移动空气消毒机的注意事项:1.注意安全使用:在使用医用移动空气消毒机时,务必按照操作手册上的指导进行操作,避免不当使用造成人身伤害或设备损坏。
2.避免空气流通:在进行空气消毒时,要尽量避免空气流通,关闭门窗,确保消毒效果。
3.防止紫外线直射:医用移动空气消毒机中的紫外线灯具有一定的辐射性,使用过程中要避免人员直接暴露在紫外线下,避免损伤皮肤和眼睛。
4.定期维护清洁:医用移动空气消毒机需要定期进行维护清洁,如清洗滤网、更换紫外线灯管等,以确保设备正常运行。
5.防止超时使用:医用移动空气消毒机在使用过程中,要避免过长时间的连续工作,以免设备损坏或影响消毒效果。
6.规范处理废气:在使用医用移动空气消毒机时,产生的废气要经过规范处理,避免废气对周围环境造成污染。
佩洁尔等离子空气消毒机使用说明书
![佩洁尔等离子空气消毒机使用说明书](https://img.taocdn.com/s3/m/78d9e0e877eeaeaad1f34693daef5ef7ba0d120e.png)
一、产品概述佩洁尔等离子空气消毒机是一款利用等离子技术进行空气消毒的家用电器。
它能有效去除空气中的细菌、病毒、霉菌等有害微生物,提供一个清洁健康的室内空气环境。
二、产品特点1.等离子技术:采用先进的等离子技术,能够产生高浓度的负离子,有效去除空气中的有害微生物。
2.高效过滤:配备高效过滤器,能够过滤空气中的颗粒物,如灰尘、花粉等,提供清洁的空气。
3.静音设计:采用静音设计,运行时噪音低,不会影响您的休息和工作。
4.多种工作模式:具有多种工作模式可供选择,如自动模式、睡眠模式等,满足不同场合的需求。
5.节能环保:低能耗设计,节省能源,环保无污染。
三、使用方法1.将消毒机放置在通风良好的位置,避免阳光直射和潮湿环境。
2.接通电源,并按下电源开关,此时消毒机将开始工作。
3.可根据需要选择不同的工作模式。
自动模式下,消毒机会根据空气质量自动调节工作强度。
睡眠模式下,消毒机会自动调整为静音运行,适合夜间使用。
4.定期更换过滤器。
根据使用情况,建议每3个月更换一次过滤器,以保证消毒机的效果和使用寿命。
5.当不使用消毒机时,建议将电源开关关闭,以节省能源。
四、注意事项1.使用时请保持通风良好,避免长时间在密闭环境下使用。
2.操作时请勿将手指或其他物体伸入机器内部,以免发生意外。
3.使用过程中如发现异常情况,请立即停止使用,并联系售后服务。
4.请勿将饮料、水或其他液体洒入机器内部,以免损坏机器。
5.请勿将重物放置在机器上,以免影响机器的正常运行。
6.在清洁机器时,请先断开电源,并使用柔软的布擦拭机器表面。
五、售后服务1.本产品享有一年质保服务,自购买之日起计算。
2.如遇到产品质量问题,请及时联系售后服务,我们将提供专业的解决方案。
3.本说明书仅为产品的使用说明,如有其他问题,请咨询售后服务。
六、总结佩洁尔等离子空气消毒机是一款高效、安全、环保的家用电器,能够提供清洁健康的室内空气环境。
通过遵循使用方法和注意事项,您可以充分利用这款产品,享受清新的空气带来的舒适和健康。
格林威二氧化氯空气消毒机(HAD-209A)使用手册说明书
![格林威二氧化氯空气消毒机(HAD-209A)使用手册说明书](https://img.taocdn.com/s3/m/3bcb7764492fb4daa58da0116c175f0e7cd11988.png)
使用手册Instruction Manual型 号: HAD -209A Model : HAD -209A衷心感谢您购买本产品,使用之前请仔细阅读《使用手册》Thank you very much for purchasing this product.Please read the User Manual carefully before use.香港微生物测试发明专利全球CE 行业认证深圳市质量计量检测研究院中国质量认证获证组织中国卫生部许可产品卫生许可批准文号:卫消字(2010)第0189号Sanitation license and permission No. GWX 0189 (2010)生产企业卫生许可证号:粤卫消证字(2018)第9134号Production enterprises hygiene license number: GWX (2018) No. 9134th 生产企业: 深圳市怀德科技发展有限公司Made by: Shenzhen Huaide Technology Development Co., Ltd.公司地址: 深圳市宝安区福永街道凤凰第一工业区华伦科技园18栋Address:1st Phoenix Industrial Zone,Fuyong T own,Shenzhen,Guangdong,China 公司网址: Web site: 服务电话: 0755-********,27345012Service hotline: 0755-********,27345012条形码:Bar code:请妥善保管本使用手册,以供日后参考Please keep the instruction manual carefully for future reference1 2 3 4 5 6 7 8 9序号 Item名称Name数量Quantity空气消毒机Air Sterilizer ClO2 装满消毒剂的药瓶ClO2 bottle 膨胀螺丝胶管Hose expansionscrew 使用手册Instruction manual 保修卡Guarantee card 合格证Certification螺丝ScrewAc 电源线AC power line 挂板Clevis1pc 1pc 1pc 1pc 4pcs 4pcs 1pc 1pc 1pc产品名称 格林威二氧化氯空气消毒机Product Name Greewin Brand ClO2 Air Sterilizer 产品型号 HAD -209A Product number输入电压 100-240V ,50-60Hz Input voltage工作电压 V 12Operating Voltage额定功率 65W rated power噪音 <45dB noise装箱清单packing list技术参数T echnical Parameters目 录保 修 卡Warranty Card特别声明Special statement1、若本产品日后有任何技术变更,恕不另行通知。
空气消毒机的操作流程,维护及保养
![空气消毒机的操作流程,维护及保养](https://img.taocdn.com/s3/m/98d92242876fb84ae45c3b3567ec102de3bddf53.png)
空气消毒机的操作流程,维护及保养下载温馨提示:该文档是我店铺精心编制而成,希望大家下载以后,能够帮助大家解决实际的问题。
文档下载后可定制随意修改,请根据实际需要进行相应的调整和使用,谢谢!并且,本店铺为大家提供各种各样类型的实用资料,如教育随笔、日记赏析、句子摘抄、古诗大全、经典美文、话题作文、工作总结、词语解析、文案摘录、其他资料等等,如想了解不同资料格式和写法,敬请关注!Download tips: This document is carefully compiled by theeditor. I hope that after you download them,they can help yousolve practical problems. The document can be customized andmodified after downloading,please adjust and use it according toactual needs, thank you!In addition, our shop provides you with various types ofpractical materials,such as educational essays, diaryappreciation,sentence excerpts,ancient poems,classic articles,topic composition,work summary,word parsing,copy excerpts,other materials and so on,want to know different data formats andwriting methods,please pay attention!一、操作流程1. 接通电源:将空气消毒机的电源线插入电源插座,确保电源稳定。
空气消毒机的操作流程及注意事项
![空气消毒机的操作流程及注意事项](https://img.taocdn.com/s3/m/13c635d782d049649b6648d7c1c708a1294a0a7b.png)
空气消毒机的操作流程及注意事项下载温馨提示:该文档是我店铺精心编制而成,希望大家下载以后,能够帮助大家解决实际的问题。
文档下载后可定制随意修改,请根据实际需要进行相应的调整和使用,谢谢!并且,本店铺为大家提供各种各样类型的实用资料,如教育随笔、日记赏析、句子摘抄、古诗大全、经典美文、话题作文、工作总结、词语解析、文案摘录、其他资料等等,如想了解不同资料格式和写法,敬请关注!Download tips: This document is carefully compiled by theeditor.I hope that after you download them,they can help yousolve practical problems. The document can be customized andmodified after downloading,please adjust and use it according toactual needs, thank you!In addition, our shop provides you with various types ofpractical materials,such as educational essays, diaryappreciation,sentence excerpts,ancient poems,classic articles,topic composition,work summary,word parsing,copy excerpts,other materials and so on,want to know different data formats andwriting methods,please pay attention!空气消毒机操作流程与使用注意事项详解在当今社会,空气消毒机已成为许多家庭和办公场所的重要设备,它们能有效去除空气中的细菌、病毒和其他有害物质,保障我们的呼吸健康。
中创芯净Y-800空气净化消毒机产品说明书(EN)
![中创芯净Y-800空气净化消毒机产品说明书(EN)](https://img.taocdn.com/s3/m/12452ca7f7ec4afe05a1df68.png)
Zhongchuang○R Y-800Electrostatic Precipitation Air DisinfectorOperating ManualZhongchuang Purifier(Xiamen)Technology Co.,Ltd.Thank you for choosing Zhongchuang®Y-800Electrostatic Precipitation Air Disinfector. Please read this Operating Manual carefully and follow the steps for your convenient use.1.This appliance can be used by children aged from8years and above and persons with reducedphysical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.cleaning and user maintenance shall not be made by children without supervision.2.Children should be supervised to ensure that they do not play with the appliance3.Prior to cleaning or other maintenance,the appliance must be disconnected from the supply mainsTable of ContentsTable of Contents (1)I.Product Introduction (1)1.1Product Name (1)1.2Product Model (1)1.3Main Germicidal Factor (1)1.4Sterilization Principle (1)1.5Types of Microorganisms Killed (1)1.6Application Range (2)1.7Technical Parameters (2)1.8External View (3)II.How To Use (4)2.1Movement and Placement (4)2.2Startup (4)2.3Operation Interface (4)2.4Shutdown (7)III.Product Maintenance (8)3.1Surface Cleaning (9)3.2Maintenance of Modules Inside (9)IV.Description of Components and Parts (12)V.Trouble Confirmation and Troubleshooting (13)VI.Other Information (14)6.1Product Storage and Transportation (14)6.2Service Life (14)6.3Matters Needing Attention (14)6.4Executive Standard (15)6.5Manufacturer’s Hygiene License No (15)6.6Manufacturer’s Name (15)6.7Manufacturer’s Address (15)6.8Zip Code (15)6.9Telephone of Customer Service Center (15)I.Product Introduction1.1Product NameZhongchuang®Y-800Electrostatic Precipitation Air Disinfector1.2Product ModelY-8001.3Main Germicidal FactorElectrostatic precipitation is the main germicidal factor.1.4Sterilization PrincipleElectrostatic reactors produce a strong electric field,and the knocked-out electrons will accelerate and then acquire very high energy.High-energy electrons may have inelastic collisions with gas molecules and atoms in motion,in which way their kinetic energy will convert to the internal energy of molecules(atoms), bringing about excitation,dissociation and ionization,and forming plasma.On the one hand,the cell membrane of bacteria will be disrupted and destroyed under the huge action of the electric field inside;on the other hand,molecular bonds will be cut to produce such free radicals as monatomic molecules,negative oxygen ions,hydroxide ions,free oxygen atoms and hydrogen peroxide(H2O2),owning activating and oxidizing capacities,and the excited particles also give off UV ray and X-ray,capable of killing bacteria and viruses.1.5Types of Microorganisms Killed1.5.1Staphylococcus albusAfter running for1h in a confined space of about20m³,under temperature20~25℃and relative humidity 50~70%,its staphylococcus albus killing rate could reach>99.9%after being tested by Chinese authorities many times,conforming to the Regulation for Disinfection Technique(2002),and thus determined disinfection qualified.1.5.2Natural bacteria in the airAfter running for60min in a confined space of about20m³,under temperature20~25℃and relative humidity50~70%,its killing rate of natural bacteria in the air could reach>90%after being tested by Chinese authorities many times,conforming to the Regulation for Disinfection Technique(2002),and thus determined disinfection qualified.1.6Application RangeThis machine is applicable for the air disinfection of interior space,such as hospitals,schools,kindergartens, hotels,office space,public places,laboratories,pet stores,washrooms,kitchens and dining rooms.It can be used for indoor air disinfection in the presence of people.1.7Technical ParametersPower supply AC220V,50HZInput power140WCirculating air speed800m³/hNoise59dB(A)Killing rate of staphylococcus albus,1h99.9%Killing rate of natural bacteria in the air,1h90%PM2.5CADR503m³/hFormaldehyde CADR300m³/hApplicable volume for disinfection94m³Applicable area for dust removal53~90m²Ozone solubility,5cm≤0.03mg/m³Sensor Temperature/humidity/PM2.5/CO²/TVOCLength of power line 1.2mProduct size(length*width*height)588*390*726mmProduct weight47kg1.8External ViewScreenScreen Front ViewFront View Back ViewBack ViewCastorSelf-elasticLock Power SocketII.How To Use2.1Movement and Placement※How to place and move the air disinfectorThis air disinfector has four castors at the bottom,including twobraking castors.●After putting the machine in place according to the demand,machine does not move.●When you want to move the machine,please uplift the brake pad manually,and the machine can move.2.2Startup 2.2.1Power ONUncover the plug,pull out the power line (stretchable),andplug in the three-phase socket (please be sure the power socketis grounded).This machine uses AC 220V/50HZ power.When it is running,please be sure the power plug well plugged in the socket;and do not roll over or damage the power line when moving the machine.2.2.3Startup●After the power line is plugged into the socket,touch the operation interface to start the machine.2.3Operation Interface●After startup,the machine is powered on and enters the main interface,as shown below:Power SocketBraking Castors ①②⑤⑥⑦⑧⑨⑩○11③④①Display current humidity,in units of%RH;②Display current temperature,in units of℃;③Display current PM2.5or CO2concentration,in units of ug/m³or ppm;④Display current TVOC status:excellent,good,medium,and poor;⑤Display current service cycle of the filter element,in units of%;⑥Display current work mode:Sleep,Low,Middle,and High;⑦PWR button:when pressing it OFF,the machine is on standby;only when it is ON,other operational buttons are enabled.⑧AUTO button:after pressing this button,the work mode of the machine will be adjusted automatically based on the PM2.5data,in no need of manual operation;⑨MANU button:used to adjust work mode manually;⑩SLEEP button:after pressing this button,the machine will enter sleep mode;⑪SETUP button:used to set parameters.●Press the SETUP button,and it presents:①Filter element setup:As shown below,the user could press the OK button to resume the service cycle of the filter element based on the maintenance time.②Factory reset:Enter the factory reset interface,press the OK button,and all parameters will reset to default.③PM2.5setup for different modes:This corresponds to the AUTO button on the main interface,and the user could adjust the PM2.5values for different modes;press the AUTO button,and the machine will adjust work mode automatically according to the parameter set by the user.The user could press the above numbers to adjust the mode,adjustment interface as shown below:④Airspeed setup:The setup interface of airspeed is shown below:Touch the value of airspeed,and the user could set and adjust the airspeed of different modes,as shown below:2.4Shutdown●When the machine is ON,press the PWR button on the operation interface,the screen will get dim,then unplug the power line,and all parts of the machine will stop working.III.Product MaintenanceWarning:※In case of product maintenance,please be sure to unplug the power line.●Detail drawing:A.Operation screenB.HandleC.Concealed power line openingD.CastorE.Primary filterF.Field electric moduleG.ESP filter H.CDF gas filter screen I.FanJ.Back blind plate K.Back door sheet L.Self-elastic lock(two,upper and lower)Steps:①Press the self-elastic lock on the back door sheet,and open it;②Remove the set screws of back blind plate with screwdriver,pull up the handle,and open the back blind plate.3.1Surface CleaningWipe the air disinfector with a soft cloth.If it is very dirty,please wipe with a soft cloth dipped some (warm)water (lower than 40℃).※CAUTION:a.Do not wash the operation screen with water.b.V olatile substance or detergent (volatile oil,diluent,polishing powder,alcohol,petroleum,etc.)will damage the machine.3.2Maintenance of Modules Inside3.2.1Way to open the door sheet before maintenance②Rinse with clear water,then dry and use.Ifseverely stained,use a banister brush togetherwith neutral detergent to clean it,then fully dryanduse.①Use the nozzle of vacuum cleaner tosuck out the dust along the surface of filter(both front and back).②If ESP filter is severely stained,soakit in the warm water containing very littledetergent for2-3min.①Use vacuum cleaner or banister brush toclean the surface dust.3.2.2Cleaning the coarse filter screen3.2.3Cleaning the field electric module①To realize a better purifying effect,please keep the spray point of the field electric module clean.You can use a dry toothbrush or cotton cloth to clean the dust,but do not wash the field electric module withwater.CAUTION:Keep it away from children to avoid pricking the hand.3.2.4Cleaning and drying the ESP filter③Rinse the soaked ESP dust collector under running water,and brush clean with banisterbrush.④Shake the cleaned filter,put it at aventilated place,and then put it back to the machine after fullydried.①Use vacuum cleaner to suck thedust out of filterscreen.②Do not wash the CDF gas filterscreen with water.CAUTION:※Do not touch the bare metal electrodes with hand when the ESP filter is just taken out of the machine,because the electrodes may still be electrostatic due to the electric charges stored in the filter not fully released!Please operate after placing aside for 30min.If detergent is required for the cleaning of the filter,please clean it thoroughly to prevent no obvious residue.※Do not wash the ESP filter with water above 50℃.※Do not dry the filter by the way above 50℃,which may lead to discoloration and deformation,resulting in the filter unable to be used any longer.PROMPT:※After cleaning the ESP filter,it may not restore to the original color.This is common,and won’t impact the performance of the filter.※If the ESP filter is not fully dried after cleaning and keeps a little water inside,it may affect the performance of the filter.Keep using until the water disappears,and the performance of the filter will recover naturally.3.2.5Cleaning the CDF gas filter screenIV.Description of Components and PartsName,specification and quantity of main componentsY-800Electrostatic Adsorption Air Disinfector Model&Specification QTY 1Power line Three-phase0.75m2/L=1.3m1 2Operation screen139*63*12mm/5’’/resistive touch screen1 3Electric control panel AC90~260V,50~60HZ/wifi/146*91*41mm14Main Circuit Board-expansion board170*52*13mm15Main Circuit Board-expansion board2114*100*13mm16Switch power supply12V/1.25A1 7Front door sheet1261*587.5*24mm/metal plate/white1 8Back door sheet1261*587.5*24mm/metal plate/white1 9Upper cover587.5*340*50mm/metal plate/black1 10Frame1257*587.5*340mm/metal plate/black1 11Self-elastic lock54.1*35.8*20.3mm/white2 12Coarse filter screen337*574*10mm/metal net1 13Field electric module337*534*35mm1 14ESP filter337*534*105mm1 15Fan DH220E5-075-000/AC230V,50~60Hz/770RPM/120W1 16CDF gas filter screen337*574*17mm1 17Sensor65*45*42mm/TVOC/CO²/PM2.5/temperature/humidity1 18Microswitch LXW20-101V.Trouble Confirmation and Troubleshooting●When you doubt of product breakdown,please check the reasons as stipulated in the following table and handle the problem.Phenomenon Reason Handling MethodDisinfector doesn’t run The power plug falls off or becomes loose.Reconnect the power supply. The supply voltage is abnormal.Check whether the supply voltageis220V.The back door sheet is not installed in place.The button doesn’t respond The PWR button is not on,and thus otherbuttons do not respond.Turn on the PWR button first.Big running noise The filter is clogged due to not cleaned for along time.Clean the filter in timePoor filtering effect Filter clogged Clean the filter in time CAUTION:※In case of other troubles,please contact the maintenance service center,and the trained professional technicians will be assigned to solve the problems.●Replacement of filter screenSpare Parts(for retail)Name of Filter Model&SpecificationPrimary filter screen337*574*10mmField electric module337*534*35mmESP filter337*534*105mmCDF gas filter screen337*574*17mmCAUTION:※Service life of filter screen changes with the service environment.Time to replace filter screen should follow system prompt.Please consult the related service center for details.Do not tear down or refit the machine freely,or operate the machine violently.Please ask professionals to repair the machine.VI.Other Information6.1Product Storage and Transportation6.1.1Product transportation:this product should be handled horizontally with care,stored and piled in one layer.Please pay attention to damp-proof,rain-proof,anti-bump and anti-vibration in the meantime.6.1.2Transportation and storage:transportation and storage of the product should meet the following requirements:1)Ambient temperature range:5℃~40℃;2)Relative humidity range:≤80%;3)Atmospheric pressure range:500hPa~1060hPa.6.2Service LifeThe service life of the main components is ≥20,000h.6.3Matters Needing Attention※Please read the Operating Manual carefully before trying to operate or maintain this product!Please abide by all safety rules to protect yourself and others.Violation of rules may lead to personal injury and/or property loss!●Do not regard this air disinfector as the only protective measure taken to prevent noxious pollutants.※Please use this machine the way regulated by the manufacturer.In case of any doubt,please contact the manufacturer.Unless otherwise especially recommended by the Operating Manual,do not repair or refit the machine.Trained professional technicians should be asked for the repair of the product.●Do not use the machine,in case of a damaged power line or plug,or a loose socket.●Do not bend,pull,twist or bind the power line freely.●Do not change the plugin anyway.If the plug doesn’t fit with the socket,please contact a qualified technician to fit a proper socket.●Do not put the power line under the carpet,or cover it with carpet.●If the machine won’t be used for a long time,please be sure to unplug the power line.●Please be sure to hold the plug when unplugging the power line.●Do not unplug the power line with a wet hand.●Do not put heavy weight on,or clamp or press the machine.●Do not sit on or lean against the machine.●Do not use the machine where little kids could reach.●Do not block the air inlet or outlet of the machine.●Do not insert (stretch)fingers or rods into the air inlet and outlet.●Please protect the machine from tea water,etc.Safety Warnings/PrecautionsBe Sure To Read!●Do not use the machine in humid and watery places,like the bathroom.●Do not put the machine near combustibles,lighted cigarettes,etc.●Do not run this machine,when using fumy(smoky)insecticide indoor.●Do not wipe the machine with such solvents as gasoline and chemicals.●Do not use any accessories or filters not provided with the machine,and it doesn’t work.●Please be sure to stop the machine and unplug the power line,when maintaining or moving the machine.●Please operate the machine strictly following the Operating Manual,and maintain the machine regularly as stipulated herein.Please be sure to unplug the power line when maintaining or repairing the machine.●When using this machine for air sterilization,please keep the space clean and dry to ensure a good sterilization effect.●It is strictly prohibited to use this machine where there are inflammable and explosive materials.●It is strictly prohibited to block the air inlet and outlet of the machine host.●Please clean or replace the filter screen regularly based on the cleanliness of the service environment,to ensure effective circulating air and sterilization effect.6.4Executive StandardQ/350203ZC0016.5Manufacturer’s Hygiene License No.(M)WXZ ZI(2020)No.(02)00466.6Manufacturer’s NameZhongchuang Purifier(Xiamen)Technology Co.,Ltd.6.7Manufacturer’s AddressNo.5Xiangming Road,Xiang’an District,Xiamen City,Fujian Province,China6.8Zip Code3611156.9Telephone of Customer Service Center0086-4008782020。