RS2105XN RUNIC润石模拟开关

RS2105XN描述：
RS2105是双通道,低导通电阻,单刀双掷（SPDT）模拟开关,设计用于1.8V至5.5V 的电压.RS2105器件可以处理模拟和数字信号.它具有快速开关速度（50ns）和低导通电阻（0.6ΩTYP）的特点. 应用包括信号门控,斩波,调制或解调（调制解调器）以及用于模数和数模转换系统的信号多路复用.
RS2105XN特点：
•-3dB带宽：30MHz
•高速，通常为50ns
•电源范围：+ 1.8V至+ 5.5V
•低导通电阻，0.6Ω（TYP）
•先断后合切换
•轨到轨操作
•兼容TTL / CMOS
•扩展的工业温度
范围：-40°C至+ 125°C
应用：
可穿戴设备
•电池供电的设备
•信号门控，斩波，调制或
解调（调制解调器）
•便携式计算
•手机
ABSOLUTE MAXIMUM RATINGS (1)
V+, IN to GND..................................................-0.3V to 7.0V
Analog, Digital Voltage Range (2) …......– 0.3 to (V+) + 0.3V
Continuous Current NO, NC, or COM……......…... ±500mA
P eak Current NO, NC, or COM……........….....…... ±800mA
ESD SENSITIVITY CAUTION
Storage Temperature ……….……………−65°C to +150°C
Operating Temperature ……….…….……−40°C to +125°C
Junction Temperature................................................150°C Package Thermal Resistance @ T A = +25°C
SOT23-5, SOT23-6………………….………………200°C/W
MSOP-10, SOIC-8 ,TSSOP-8……….………….... 150°C/W
SOIC-14, TSSOP-14………….……….……………100°C/W
Lead Temperature (Soldering, 10s) ……………........260°C
ESD Susceptibility
HBM (1000V)
MM (300V)
(1) Stresses above these ratings may cause permanent damage. Exposure
to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied.
(2) Input terminals are diode-clamped to the power-supply rails. Input
signals that can swing more than 0.3V beyond the supply rails should be current-limited to 10mA or less. ESD损坏的范围可能从轻微的性能下降到完全的设备故障。

精密集成电路可能更容易受到损坏，因为很小的参数变化可能会导致器件不符合其发布的规格。

PACKAGE/ORDERING INFORMATION
PRODUCT ORDERING NUMBER TEMPERATURE
RANGE
PACKAGE
LEAD
PACKAGE
MARKING
PACKAGE OPTION
RS2105XN -40℃~125℃ MSOP-10 RS2105 Tape and Reel,3000
RS2105
RS2105XTDC10 -40℃~125℃
TDFN-
3x3-10L
RS2105 Tape and Reel,5000
ELECTRICAL CHARACTERISTICS电气特性
V+ = 5.0 V, T A= –40°C to 125°C (unless otherwise noted)
PARAMETER SYMBOL CONDITIONS V+ T A MIN TYP MAX UNITS ANALOG SWITCH
Analog Signal Range V NO, V NC, V COM FULL 0 V+ V
On-Resistance R ON 0≤ (V NO or V NC) ≤V+,
I COM = -10mA, Switch ON,
See Figure 1
5V
3.3V
+25℃ 0.6 1.0 Ω
FULL 1.2 Ω
+25℃ 1.0 1.5 Ω
FULL 1.7 Ω
On-Resistance Match
Between Channels ∆R
ON 0≤ (V NO or V NC) ≤V+,
I COM = -10mA, Switch ON,
See Figure 1
5V
3.3V
+25℃ 0.04 0.1 Ω
FULL 0.12 Ω
+25℃ 0.04 0.1 Ω
FULL 0.12 Ω
On-Resistance Flatness R FLAT(ON) 0≤ (V NO or V NC) ≤V+,
I COM = -10mA, Switch ON,
See Figure 1
5V
3.3V
+25℃0.18 0.3 Ω
FULL 0.4 Ω
+25℃0.54 0.7 Ω
FULL 0.8 Ω
NC,NO OFF Leakage Current I NC(OFF), I NO(OFF) V NO or V NC = 0.3V, V+/2 V COM =
V+/2, 0.3V See Figure 2
1.8 to
5.5V
FULL 1 μA
NC,NO,COM ON Leakage Current I NC(ON), I NO(ON),
I COM(ON)
V NO or V NC = 0.3V, Open V COM =
O pen, 0.3V See Figure 2
1.8 to
5.5V FULL 1 μA
DIGITAL CONTROL INPUTS(1)
Input High Voltage V INH
5V FULL 1.5 V 3.3V FULL 1.3 V
Input Low Voltage V INL
5V FULL 0.6 V 3.3V FULL 0.5 V
Input Leakage Current I IN V IN = V IO or 0 1.8 to
5.5V FULL 1 μA (1) All unused digital inputs of the device must be held at V IO or GND to ensure proper device operation.
ELECTRICAL CHARACTERISTICS (continued) 续V+ = 5.0 V, TEMP= –40°C to 125°C (unless otherwise noted))
TYPICAL CHARACTERISTICS典型特征
BANDWIDTH BANDWIDTH
3 3
0 0
-3 -3
-6 -6
-9 -9
0 1 10 100
Frequency(MHz) V+=3V 0 1 10 100
Frequency(MHz) V+=5V
Typical ron as a Function of Input Voltage (VI ) for VI = 0 to V+
10
1
0.1
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
VI(V)
V+=5.5V V+=4V V+=3.3V V+=2.5V V+=1.8V
Parameter Measurement Information参数测量信息
Figure 1.ON-State Resistance (r on)
Figure 2.OFF-State Leakage Current (I COM(OFF), I NO(OFF))
Figure 3.ON-State Leakage Current (I COM(ON), I NO(ON))
Figure 4.Capacitance (C I, C COM(OFF), C COM(ON), C NO(OFF), C NO(ON))
Figure 5.Turn-On (t ON) and Turn-Off Time (t OFF)
Figure 6.Break-Before-Make Time (t BBM)
Figure 7.Bandwidth (BW)
Figure 8.OFF Isolation (O ISO)
Figure 9.Crosstalk (X TALK)
Figure 10.Charge Injection (Q C)
Figure11.Total Harmonic Distortion (THD)
PACKAGE OUTLINE DIMENSIONS包装外形尺寸
MSOP-10
b e
E E1 4.65
D
1.02
0.31
0.5 RECOMMENDED LAND PATTERN (Unit: mm)
A2 A1 A
c
L
θ
Symbol D imensions In Millimeters Dimensions In Inches
Min Max Min Max
A 0.820 1.100 0.032 0.043 A1 0.020 0.150 0.001 0.006 A2 0.750 0.950 0.030 0.037
b 0.180 0.280 0.007 0.011
c 0.090 0.230 0.004 0.009 D 2.900 3.100 0.114 0.122 e 0.50(BSC) 0.020(BSC)
E 2.900 3.100 0.114 0.122 E1 4.750 5.050 0.187 0.199 L 0.400 0.800 0.016 0.031 θ0°6°0°6°
TDFN-3x3-10L
E
e b
N5 N1
D1
TOP VIEW BOTTOM VIEW
2.4
SIDE VIEW
0.24 0.5
RECOMMENDED LAND PATTERN (Unit: mm)
Symbol Dimensions In Millimeters Dimensions In Inches
Min Max Min Max
A 0.700 0.800 0.028 0.031
A1 0.000 0.050 0.000 0.002
A2 0.203 0.008
b 0.180 0.300 0.007 0.012
D 2.900 3.100 0.114 0.122
D1 2.300 2.600 0.091 0.103
E 2.900 3.100 0.114 0.122
E1 1.500 1.800 0.059 0.071
e 0.500 TYP 0.020 TYP
k 0.200 MIN 0.008 MIN
L 0.300 0.500 0.012 0.020
11
以上是“奥伟斯科技”分享的产品信息，如果您需要订购此款物料，请
查看我们的官网与我们联系，非常感谢您的关注与支持！奥伟斯科技提供专
业的智能电子锁触摸解决方案,并提供电子锁整套的芯片配套:低功耗触摸芯片、低功耗单片机、马达驱动芯片、显示驱动芯片、刷卡芯片、时针芯片、
存储芯片、语音芯片、低压MOS管、TVS二极管；IKSEMI电源管理芯片、DC/DC 转换器:IL34063 IL7660 IL1583 IL1591 IL2307 低压差稳压器:IL1117 三端稳压器:IL2596 IL2576 IL1085 IL1084 IL1083 复位IC；中微爱芯遥控编码芯片、可编程遥控编码芯片 AIP4910 AIP4911 AIP4901 AIP4902 AIP4903 AIP4904 CD6220 CD6221 CD6222 AIP6920 AIP6921 AIP6922 AIP2240；优势产品未尽详细，欢迎查询！。