Schlemmer 公司简介 -100921

We protect technology.
Ningbo Schlemmer Company Profile
宁波诗兰姆公司简介
China
Ningbo Huaxiang Electronic Co, Ltd.
中国宁波华翔电子有限公司
50%
One of the first-class companies in Chinese automotive plastic parts industry
华翔是中国汽车塑料件方面的一流企业
A lot of resources & experience of design, development, production & Inspection of plastic parts
拥有塑料件设计，开发，生产和检验的丰富经验和资源。

A Expert for many plastic parts like interior trim parts, middle consoles, Instrument panel, door panel , Outside Mirrors , Painting , plating plastic ,A, B, C Pillars & real-wooden decorative parts on plastic holders
华翔在汽车内饰件方面，如中央通道，仪表板, 门板，后视镜，电镀件，油漆件，A ，B ，C 柱，胡桃木饰件方面享有盛名。

Joint Venture 合资
Germany
Schlemmer GmbH
德国诗兰姆股份有限公司
50%
No. 1 company for cable protection system parts in the world automotive industry (annual output of 400 mio. metres of corrugated tubes and 800 Mio. pieces of injection moulding parts)在世界汽车行业线路保护专业企业中排行第一（年产各类波纹管4亿米，注塑件8亿件）
Also in the field of automotive air and fluid tubes & mechatronic parts for European
commercial vehicles Schlemmer holds a strong position.
并在汽车气液管路方面和欧洲商用车机械电子件方面实力雄厚。

Sales Organization worldwide 诗兰姆全球销售组织图
Automobile air-conditioner housings 汽车空调配件系统
Ningbo Merkt Auto Decorative Parts Co., Ltd.宁波玛克特汽车饰件有限公司
Shanghai Huaxin Auto Plastics Co., Ltd. 上海华新汽车橡塑制品有限公司
Ningbo Schlemmer Automobile Parts Co., Ltd.宁波诗兰姆汽车零部件有限公司
Ningbo Huaxiang Auto Decorative Parts Co., Ltd 宁波华翔汽车内饰件有限公司
Shanghai VW-Liangxiang Automobile Parts Co., Ltd.上海大众联翔汽车零部件有限公司
Ningbo Miller Mould Manufacturing Co., Ltd.宁波米勒模具制造有限公司
Ningbo INOAC Huaxiang Auto Parts Co., Ltd.宁波井上华翔汽车零部件有限公司
Ningbo SMR Huaxiang Car Mirros Co., Ltd.宁波胜维德赫华翔汽车镜有限公司
Changchun Huaxiang Car Silencer Co.,Ltd.长春华翔轿车消声器厂
Gongzhuling Huaxiang Automotive Parts Co., Ltd.公主岭华翔汽车内饰件有限公司
Ningbo Huaxiang Antonlin Automotive Parts Co, Ltd.宁波华翔安通林汽车零部件有限公司
Products: Automobile plastic parts 汽车塑料零部件
Painting & plating plastic parts 电镀、油漆零件
Wiring harness protection Parts, Air&Fluid 汽车电气线路保护
walnut or IMD products on plastic base 桃木饰件、IMD 饰件
Tuerverkleidung, Himmel.门内护板,顶棚等
Himmel ZSB fuer Autos 轿车顶棚
Exhaust Systems including muffler 轿车净化与排气系统、汽车冲焊零部件Oudside Mirrors, Tank covers, door handles 后视镜、加油小门、拉手
IP-Panels, door panels 仪表板、门板
mould design & manufacturing 模具设计制造
Huaxiang Electronic 宁波华翔
2009年销售30亿人民币
The Turnover of 2009was ３Billion RMB 控股15家汽车零部件子公司Holding on 15 Auto parts Co. 全球发展和收购战略Global Expansion, M&A
参股富奥(中国北方最大汽车零部件公司)Shares an FAWer
(Nr. Auto parts Co, in NorthChina)
FAWer Auto parts Co., Ltd 富奥汽车零部件股份有限公司
Beteiligung an 40 Unternehmen
参股控股近40家企业（合资企业居多） The Turnover is 4 bis 12 Milli. RMB 销售40到120亿（不合并或者合并）
Ningbo Huaxiang Electronic > Main Products
华翔主流产品
Interior Trim Parts 汽车内饰门板系统
Wood and IMD 胡桃木内饰件
Rear View Mirror
Outer Series
后视镜系列
Plastic Parts for Engines 发动机塑料零件 Air conditioner
ventilation ducts 空调配件风道系统
Front & Rear
Windshield 前后挡风玻璃包边
Company Profile 公司简介
Professional skills:
专业的技术集
Design......设计
Development....开发
Manufacture......生产
Sale of plastic parts. 销售
We are the biggest supplier for harness protection
systems in the Chinese automotive market.
我们是中国线路保护系统市场上最大的厂商
Also we are the important supplier in Air &Fluid System and Mechatronic System
同时在油汽管路和电子机械件方面是重要供应商
◆Founded in / 成立时间:2001 ◆Registered capital 注册资金:30 Mio. RMB ◆Employees / 员工:
700staffs 名◆Turnover 2009/2009年销售额:175Mio. RMB ◆Turnover 2010/ 2010年销售额:
240Mio. RMB
由总部各部门协调分公司相关事宜
1Ningbo Schlemmer 宁波总部2Subsidiary Changchun 长春子公司3Subsidiary Zhongshan 中山子公司4Subsidiary Suzhou 苏州子公司5Subsidiary Yantai 烟台子公司6Subsidiary Wuhan 武汉子公司
7Subsidiary Vietnam 越南子公司(计划2011)8Subsidiary Chengdu 成都子公司(计划2012)9
Subsidiary Tianjing 天津子公司(计划2013)
10Sales Office Shanghai 上海销售办11Sales Office Zhuzhou 湖南销售办12Warehouse Fuzhou 福州仓库13Warehouse Huizhou 惠州仓库14Warehouse Chongqing 重庆仓库15Warehouse Baicheng 白城仓库
16Warehouse Tianjing 天津仓库(计划中)17Warehouse Dalian 大连仓库
18
Warehouse Jinan
济南仓库19Warehouse Xi’an 西安仓库
中国诗兰姆分布图-基于产品的围棋战略
Regional Head Office 总部Subsidiary 子公司Sales Office 销售办公室Logistic Center 仓库物流中心
Changchun Schlemmer Company Profile 长春分公司概要
Founded in / 成立时间:Dec.2006
Move to New Plant 新搬迁厂房:2008-05-15
Tube Production/ 生产线
Employees/ 员工:63 staffs/63 名
Corrugated Tubes/波纹管生产线:3lines/3条
PVC Smooth-Tubes/PVC管生产线:2lines/2 条
Cutting Machines/切割机:10sets/10台
Production Capacity/产能
Corrugated tubes per year/波纹管:1千8百万米/18Mio. M
PVC tubes per year/ PVC管:1千万米/10 Mio. M
Zhongshan Schlemmer Company Profile中山分公司概要
Founded in / 成立时间:Dec.2006
Tube Production/ 生产线
Employees/ 员工:81 staffs/81 名
Corrugated Tubes/波纹管生产线: 5 lines/5 条
PVC Smooth-Tubes/PVC管生产线:3lines/3 条
Cutting Machines/切割机:9 sets/9 台
Production Capacity/产能
Corrugated tubes per year/波纹管:2千4百万米/24 Mio. M
PVC tubes per year/ PVC管:6百万米/6 Mio. M
Injection Moulding注塑:4台
(2008年10月开始生产)
Founded in/成立时间:2008-05-10
Tube Production/生产线
Employees/员工:74 staffs/74名
Corrugated Tubes/波纹管生产线: 3 lines/3条
PVC Smooth-Tubes/PVC管生产线:0 line/0条
Cutting Machines/切割生产线:18 lines/18条
Production Capacity/产能
Corrugated tubes per year/波纹管:1千6百万米/16 Mio. M PVC tubes per year/PVC管:0百万米/0Mio. M
Founded in/成立时间:2010-09-03
Tube Production/生产线
Employees/员工:16staffs/16名
Corrugated Tubes/波纹管生产线: 2 lines/2条
PVC Smooth-Tubes/PVC管生产线:0 line/0条
Cutting Machines/切割生产线:
Production Capacity/产能
Corrugated tubes per year/波纹管:1千2百万米/12 Mio. M PVC tubes per year/PVC管:0百万米/0 Mio. M
Founded in/成立时间:2010-9-6
Tube Production/生产线
Employees/员工:15 staffs/15名
Corrugated Tubes/波纹管生产线: 1 lines/1条
PVC Smooth-Tubes/PVC管生产线: 1 line/1条
Cutting Machines/切割生产线:lines/条
Production Capacity/产能
Corrugated tubes per year/波纹管:6百万米/8 Mio. M PVC tubes per year/PVC管:2百万米/2 Mio. M
Modern Production Facility 先进高效的生产设备
High Quality and Low cost
高品质低成本
Extrusion and Corrugation 挤出成型 28 Extrusion-Lines for Corrugated Tubes 28 条波纹管挤出生产线
9 Extrusion-Lines for Mono-Layered PVC Smooth-Tubes 9 条PVC 管生产线 1 Extrusion line for PE Tube 1条PE 管生产线 2 Extrusion-Lines for Oil Tubes 2条油管生产线 32 Cutting Machines (Cut on the Crest)32条切割生产线(切割在波峰上)
Injection Moulding 注塑成型现有45台不同吨位(T)注塑成型机
we have 45 Injection machines now : 58T: 2 60T: 3 80T: 6 90T: 8 150T: 2 160T: 3
200T: 4 250T: 12 280T: 2 360T: 2 380T: 1
Develop Ability 开发能力
Experienced Development
完整的产品研发体制
Set up the Trial-Run Room
重视开发的质量与速度，成立了专门的试作车间
Existing Development Technology：CAD/CAE/CAM
现有开发技术：CAD/CAE/CAM
Existing Development Software：UG、CATIA 、MOLDFLOW、PRO/E
现有开发软件：UG、CATIA、MOLDFLOW、PRO/E
Regularly sent technical personnel to other countries for training, learning
定期派遣工程人员到国内外培训,学习
Send Mr. Yu to Japan, to design & develop new parts together with Japanese customers.
公司已派工程师Mr. Yu到日本和日本客户一起设计开发新零件
Send Mr. Lei& Mr. Chen to Germany, to design & develop new parts together with HQ.
派工程师Mr. Lei & Mr. Chen到德国和总部一起设计开发新零件
Automotive Range of Application 汽车应用领域
Philosophy of Schlemmer Cable Protection诗兰姆线束保护理念 波纹管和注塑件自成系统
COT & injection part in one System
保护性能强
Strong protection function
装配简单, 成本较低
Simple assembly with low cost
实用美观
Visual Value
维修方便
Easy check and maintenance of Harness
Corrugated Tubes >波纹管
Corrugated Tubes> Temperatures 波纹管耐温等级
Corrugated Tubes > Profiles 波纹管波形
Corrugated Tubes >Special特种波纹管
EMC and Flat Corrugated tubes
Soft PVC Tube PVC 软管
ID Size : from 3mm to 34mm
内径规格:3毫米至34毫米
Wall thickness : from 0.5mm to 1.0mm 壁厚:0.5毫米至1.0毫米
Temperature-classes for long term using （3000h)
长时间使用的温度等级(3000小时):85 ℃, 95 ℃, 105 ℃
...Protect the cable in automobile harness against 用来保护汽车线束内的电线•Dirty 防尘•Coldness 防冻•Flammability 阻燃
•Heat resistance & high temperature 耐热
Injection Moulding Parts > Manifolds 各式扎扣
T –Manifolds
Y -Manifolds Manifolds
Features / 特点：
Customer Specific Developments 顾客特殊开发产品
Injection Moulding Parts > Connector Interfaces
接插件护壳
Connector Interface
Injection Moulding Parts > Fixings & Cable Ties 定位件和扎带
Special Cable ties 特殊扎带
Standard cable ties 标准扎带
Injection Moulding Parts > Clamps 线束紧固件
Injection Moulding Parts > Cable Channels 线束保护导槽
Other Parts 其他产品
Air and Fluid Systems气液管路系统
Air and Fluid Systems >Flange油泵法兰
目前我司已开发40多种油管，30余种法兰
We have developed about 40 kinds of oil tubes & 30 kinds of flange.
主要顾客：联合电子、博世、吉林七星等
Main Customers：UAES，BOSCH, Jilin Qixin etc.
Mechatronic Systems （
Imported ）
机械电子系统（进口件）
Quality is our life.
视质量为生命
Continuous improvement is our slogan & assures our high quality products.
始终坚持一流品质原则，致力于生产质量的提高
All processes, starting from the initial development of a new product, through series
production to inspection & logistic supply of products to our customer are subject under
permanent control & continuos improvement.
使我们能从初步的设计阶段到产品的实现生产,检验,交货的每一方面和
每一阶段确保不断完善，超越顾客期望
Ningbo Schlemmer is certified according to ISO 9001, QS 9000, VDA 6.1.
宁波诗兰姆先后通过了ISO 9001, QS 9000, VDA 6.1 质量体系认证
Got the quality certification of ISO/TS16949 on August 2003
2003年8月通过ISO/TS 16949 体系审核
Got the quality certification of ISO/TS16949 on March 2008
2008年3月通过ISO/TS 16949 体系复审
Got the 2008 Delphi Pinnacle Award for Supplier Excellence on 2008
2008年荣获“德尔福全球优秀供应商“称号
Passed the class A audit of FAW-VW on August 2009
2009年8月通过一汽大众A级别供应商审核
Passed the class A audit of Shanghai VW on September 2009
2009年9月通过上海大众A级供应商审核
Quality Guarantee 诗兰姆品质保证
Melt index machine 融化指数测试仪 Impact testing machine 冲击测试机器 Project machine 光学投影仪
Characteristic measuring station 三坐标
Tensile testing machine(big/small)拉伸测试机器（大/小） Temperature testing machine 高、低温试验箱
Salty-spray testing case 盐雾试验箱 Burning testing machine 燃烧试验箱 Xenon light oven 氙灯试验箱
Vibration testing machine 振动实验机器 Distortion testing machine 热变形试验机 High temperature oven 高温箱
Experiment Equipment 实验设备
Ningbo Schlemmer test room
宁波诗兰姆试验室
OEM 主机厂
References 合作伙伴
Harness Maker 线束厂
Thanks!
We make technology.。