光纤打标机控制卡使用手册

2.4 typical wiring..................................................................................................................16
E-document owned By JCZ, Beijing
LMC2010_FIBER_CUH_V1(0)
USBLMC Client Use Handbook
Fiber Laser Control Board
LMC2010 users' manual_Fiber
版本记录 版本号 V1.0 V1.1 V1.2 V1.3 V1.4 V2 更新日期 2007-1 2007-6 2008-5 2008-5-12 2009-12-12 2010-12-2 吕文杰 程鹏 吕文杰 程鹏 同时兼容 B 型/D 板与接口板合并；激光器状态信号和扩展 轴原点信号采用专用的输入的信号；激光器 状态错误输出提示； 16 路通用输入输出信 号。 Translate 更新人 更新说明
2011-5-4
John
E-document owned By JCZ, Beijing
II
All rights reserved.
LMC2010 users' manual_Fiber
Content
Safety instruction...............................................................................................................................1 1 Overview................................................................................................................................... 2 1.1 schematic and structure....................................................................................................... 2 1.2 main feature.........................................................................................................................2 2 Wiring........................................................................................................................................3 2.1 Pin definition.................................................................................................................... 3
2.3.1 input signal In0-3，In8, ReMark.................................................................................................. 10 2.3.2 input signal In4-7，In9................................................................................................................. 10 2.3.3 PWM signal...................................................................................................................................11 2.3.4 FPK signal.....................................................................................................................................14
2.
E-document owned By JCZ, Beijing
1
All rights reserved.
LMC2010 users' manual_Fiber
. Common Digital Module
1.1 How to identify a LMCFIBER board.
III
All rights reserved.
LMC2010 users' manual_Fiber
Safety During Installation And Operation
Please read these operating instruction completely before you proceed with installing and operating this product. If there are any questions regarding the contents of this manual, please contact BJJCZ. 1. Steps For Safe Operation � Carefully check your application program before running it. Programming errors can cause a break down of the system. In this case neither the laser nor the scan head can be controlled. � Protect the board from humidity, dust, corrosive vapors and mechanical stress. � For storage and operation, avoid electromagnetic fields and static electricity. These can damage the electronics on the product. For storage, always use the antistatic bag. � The allowed operating temperature range is 25℃ ± 10℃. � The storage temperature should be between –20℃ and +60℃. Laser Safety � This product is intended for controlling a laser scan system. Therefore all relevant laser safety directives must be known and applied before installation and operation. The customer is solely responsible for ensuring the laser safety of the entire system. � All applicable laser safety directives must be adhered to. Safety regulation may differ from country to country. It is the responsibility of the customer to comply with all local regulations. � Please observe all laser safety instructions as described in you scan head or scan module manual, and this manual. � Always turn on the power of this product and the power supply for the scan head first before turning on the laser. Otherwise there is the danger of uncontrolled deflection of the laser beam. We recommend the use of a shutter to prevent uncontrolled emission of laser radiation.
2.1.1Power supply....................................................................................................................................3 2.1.2 CON1 ：DB15 scanhead control socket........................................................................................ 3 2.1.3 CON2 ：DB25 laser control /IOs socket....................................................................................... 5 2.1.4 CON3 ：DB9 on-the-fly interface................................................................................................. 6 2.1.5 CON4 ：DB15 powersupply/extension axis/IO socket................................................................. 7 2.1.6 CON5 ：DB25 I/O socket............................................................................................................. 7
2.2 jumpers............................................................................................................................. 8 2.3 wiring for digital I/O...................................................................................................... 10