船舶建造检验项目表
合集下载
相关主题
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
Before weld welding procedure preparation, weld flux,
weld material are subjected to DNV’s requirement.
2)焊缝X光拍片
X-ray photograph for weld
3)大合拢焊缝焊前及焊后检查
Preweld and postweld checking of whole joining weld
3)开孔光顺,焊接局部变形已修正到要求
Fairing of holes, welding local distortion has been modified to requirement
4)装焊临时加强已拆除,焊脚磨光
Provisional strengthening for fitting has been moved away, weld toe has been polished
二
舾装
1
锚泊及系泊实验
Anchor equipment and mooring equipment test
1)完整性检查,外部检查
Inspection of completeness and exterior
2)弃锚器牢固可靠,易于弃锚
Releasing anchor is solid and dependable ,easy to release.
验收项目
Item of inspection
验收内容
Kind of Inspection
验收阶段
Stage of Inspection
参加人员Attendance
b)强力甲板角隅板
Corner plate of strength deck
c)船舯0.4L区域内纵向骨架和纵舱壁扶强材对接头
In0.4Lextent of midship, butt weld of longitudinal frame to longitudinal bulkheads stiffeners
d)起重柱、桅对接缝,包括焊接缝上的每个交叉点
Butt weld of crane pillar and mast, include each intersection of weld
e)机舱内底板与机座面板的边界缝
boundary of innerbottom to machine foundation
2)舭龙骨
Bilge keel
3)双层底、艏尖舱、尾尖舱及其他油水舱完整性检验
Integrating inspection of double-bottom , fore peak, aft peak and other oil-water tank
3
焊接
Welding
1)焊接前焊缝工艺准备、焊剂、焊料符合DNV要求
According to the rules, tightness test of each position.
5
油漆及涂料
Paint
1)车间底漆
Priming paint in workshop
2)水下
Underwater paint
3)水上
Above water paint
4)舱内
In the compartment paint
5)审图意见已在分段建造中落实
Design appraisal has been applied in block construction
2
分段船台装配
Block Assemble on Platform
1)分段间对接缝的间隙,坡口、边缘的高低及内部构架件
Gap. Groove .edge of butt weld between blocks and inner frame
3)止链器工作的可靠性
Reliability of stopper work
4)设备底座与甲板结构的加强
Strength of equipment foundation to deck construction
5)按实验大纲进行实验
Test according to test schedule
序号
No.
Material of block component is subjected to DNV’s requirement, all size in accordance with construction drawing.
2)分段加工精度和焊接表面质量
Machined accuracy of block plate and surface quality of welding
4)重要部位焊接检查
weld checking of important position
a)0.4L内,强力甲板、舷顶列板、舷侧旁板、、船底板纵横焊缝交叉点,平板龙骨对接缝,圆弧形弦顶列板对接缝
பைடு நூலகம்序号
No.
验收项目
Item of inspection
验收内容
Kind of Inspection
验收阶段
序号
No.
验收项目
Item of inspection
验收内容
Kind of Inspection
验收阶段
Stage of Inspection
参加人员Attendance
备注
Remarks
船厂
QC
船东
Owner
验船师
BV
一
船体
HULL
1
分段验收
Block inspection
1)分段构件的材料符合DNV要求,尺寸均符合图纸
f)各层甲板、平台板、内底板和纵横舱壁的边接缝
boundary at each deck, flat floor, innerbottom and longitudinal and transverse bulkheads
4
船体焊接密性实验
Weld sealed test of hull
按规程要求,各部位的密性实验
Stage of Inspection
参加人员Attendance
备注
Remarks
船厂
QC
船东
Owner
验船师
BV
In0.4L,strength deck, vertically and horizontally weld intersection of sheer strake, sheer side and strake; butt weld of plate keel; butt weld of arc sheer strake
weld material are subjected to DNV’s requirement.
2)焊缝X光拍片
X-ray photograph for weld
3)大合拢焊缝焊前及焊后检查
Preweld and postweld checking of whole joining weld
3)开孔光顺,焊接局部变形已修正到要求
Fairing of holes, welding local distortion has been modified to requirement
4)装焊临时加强已拆除,焊脚磨光
Provisional strengthening for fitting has been moved away, weld toe has been polished
二
舾装
1
锚泊及系泊实验
Anchor equipment and mooring equipment test
1)完整性检查,外部检查
Inspection of completeness and exterior
2)弃锚器牢固可靠,易于弃锚
Releasing anchor is solid and dependable ,easy to release.
验收项目
Item of inspection
验收内容
Kind of Inspection
验收阶段
Stage of Inspection
参加人员Attendance
b)强力甲板角隅板
Corner plate of strength deck
c)船舯0.4L区域内纵向骨架和纵舱壁扶强材对接头
In0.4Lextent of midship, butt weld of longitudinal frame to longitudinal bulkheads stiffeners
d)起重柱、桅对接缝,包括焊接缝上的每个交叉点
Butt weld of crane pillar and mast, include each intersection of weld
e)机舱内底板与机座面板的边界缝
boundary of innerbottom to machine foundation
2)舭龙骨
Bilge keel
3)双层底、艏尖舱、尾尖舱及其他油水舱完整性检验
Integrating inspection of double-bottom , fore peak, aft peak and other oil-water tank
3
焊接
Welding
1)焊接前焊缝工艺准备、焊剂、焊料符合DNV要求
According to the rules, tightness test of each position.
5
油漆及涂料
Paint
1)车间底漆
Priming paint in workshop
2)水下
Underwater paint
3)水上
Above water paint
4)舱内
In the compartment paint
5)审图意见已在分段建造中落实
Design appraisal has been applied in block construction
2
分段船台装配
Block Assemble on Platform
1)分段间对接缝的间隙,坡口、边缘的高低及内部构架件
Gap. Groove .edge of butt weld between blocks and inner frame
3)止链器工作的可靠性
Reliability of stopper work
4)设备底座与甲板结构的加强
Strength of equipment foundation to deck construction
5)按实验大纲进行实验
Test according to test schedule
序号
No.
Material of block component is subjected to DNV’s requirement, all size in accordance with construction drawing.
2)分段加工精度和焊接表面质量
Machined accuracy of block plate and surface quality of welding
4)重要部位焊接检查
weld checking of important position
a)0.4L内,强力甲板、舷顶列板、舷侧旁板、、船底板纵横焊缝交叉点,平板龙骨对接缝,圆弧形弦顶列板对接缝
பைடு நூலகம்序号
No.
验收项目
Item of inspection
验收内容
Kind of Inspection
验收阶段
序号
No.
验收项目
Item of inspection
验收内容
Kind of Inspection
验收阶段
Stage of Inspection
参加人员Attendance
备注
Remarks
船厂
QC
船东
Owner
验船师
BV
一
船体
HULL
1
分段验收
Block inspection
1)分段构件的材料符合DNV要求,尺寸均符合图纸
f)各层甲板、平台板、内底板和纵横舱壁的边接缝
boundary at each deck, flat floor, innerbottom and longitudinal and transverse bulkheads
4
船体焊接密性实验
Weld sealed test of hull
按规程要求,各部位的密性实验
Stage of Inspection
参加人员Attendance
备注
Remarks
船厂
QC
船东
Owner
验船师
BV
In0.4L,strength deck, vertically and horizontally weld intersection of sheer strake, sheer side and strake; butt weld of plate keel; butt weld of arc sheer strake