堡狮龙电话机说明书
狮龙8105功放说明书
CONTENTS－－－－－目录Introduction－－－－－介绍• READ THIS BEFORE OPERATING YOUR UNIT | 1－－－－－操作前请阅读• SAFETY INSTRUCTION | 2－－－－－安全教育System Connections | 4－－－－－系统连接Front Panel Controls | 11－－－－－前板控制键Universal Remote Controls | 13－－－－－通用摇控器• OPERATING COMPONENTS WITH REMOTE CONTROL | 15－－－－－摇控器使用• REMOTE CONTROL OPERATION RANGE | 15－－－－－摇控器控制范围• LOADING BATTERIES | 15－－－－－安装电池• USING FUNCTIONS OF REMOTE CONTROL | 16－－－－－控制器按键功能使用Speaker Setup | 19－－－－－扬声器设置• SETTING THE SPEAKER SETUP MANUALLY | 20－－－－－扬声器手动设置• SETTING THE SPEAKER SETUP AUTOMATICALLY (AUTO SPEAKER SETUP) | 22－－－－－－扬声器自动设置Operations－－－－－操作• LISTENING TO A PROGRAM SOURCE | 25－－－－－音乐信号源欣赏（听音）• SURROUND SOUND | 28－－－－－环绕声• ENJOYING SURROUND SOUND | 30－－－－－享受环绕效果• LISTENING TO RADIO BROADCASTS | 35－－－－－收听广播电台• RECORDING | 37－－－－－录音• DIGITAL AUDIO RECORDING WITH MiniDisc RECORDER | 38－－－－－用MD录音机进行数字录音• OTHER FUNCTIONS | 39－－－－－其它功能Using the OSD (On Screen Display)－－－－－屏幕显示器• CURRENT STATUS DISPLAY | 40－－－－－显示屏实时显示OSD (On Screen Display) Menu Settings | 40－－－－－在显示设备屏幕上进行菜单设置• SETTING THE SPEAKER SETUP | 42－－－－－扬声器设置• SELECTING THE FUNCTION | 45－－－－－功能选择• SELECTING THE SURROUND MODE | 47－－－－－环绕效果模式选择• SETTING THE CH LEVEL SETUP | 48－－－－通路电平设置（音量设置）Troubleshooting Guide | 50－－－－－故障排除指南Specifications | 51－－－－－规格Setup Code Table | 53－－－－－摇控器安装代码表第4页System Connections－－－－系统连接•所有的连接完成前，不要将其插头插入插座内•音频，视频和喇叭线一定要对应彩色或编码连接。
堡狮龙hcd133（2）tsdl电话机说明书（通用）
堡狮龙HCD133（2）TSDL电话机说明书（通用）铃声音量调节在挂机状态下，按『音量』键可循环调节铃声音量大小，共有4级音量可选，“IN9U0L 4”为最大、“IN9U0L 4”为最小“CrESC”为声音渐强。
免提音量调节在按『免提』键摘机状态下，按『音量』键可循环调节免提接收音量大小，共有2级音量可选，“HFU0L 2”为最大、“HFU0L 1”为最小。
显示亮度调节在挂机状态下，按『亮度调节』键可循环调节显示屏亮度，共有5级亮度可选，“LCD 5”为最大，“LCD 1”为最小。
菜单设置（设置菜单如有出错可按﹡#06﹡恢复默认设置，清除存储）挂机状态下按『设置』键进入设置状态，LCD显示“SE￡ 1 DA￡E”，此时可以按上查键或下查键选择设置项，LCD同时显示对应的设置项，再按『设置』键进入该项设置。
在某项设置完成后，按『设置』键确认同时将会进入下项设置，所以设置都已按『设置』键确认完成并转到下一项，用上查键或下查键修改具体设置项，按『删除』键退出设置状态，具体设置如下：设置日期/时间1.显示屏显示“SE￡ 1 DA￡E”，按『设置』键确认进入日期/时间设置。
2.看到年份后两位字体闪烁，此时按上查或下查键修改，完成后按『设置』键确认，并进到月的设置，修改方法与年的设置相同也是按上查键或下查键修改。
3.重复以上步骤可依次修改日、小时、分钟4.按『删除/R』键退出设置区域码1.显示屏显示“SE￡ 2 CODE”，按『设置』键确认，显示屏显示“CODE-----”2.按上查键或下查键，设置第一区域吗3.第一位设置好后，再按『设置』键确认，进入第二位设置，同上方法一样依次设置4.按『删除/R』键退出设置出局码1.显示屏显示“SE￡ 3 PCODE”，按『设置』键确认，显示屏显示“CODE—”2.按上查键或下查键设置出局码，再按『设置』键确认3.按『删除/R』退出例如：用户是公司内线直拨打外，前面需先拔“9”再拨外线电话号码的，那么“9”就是出局码，按上设置好出局码，再回拨来电，预拨号时，若号码大于或等于6位且首位与出局码不同，按『重播/回拨』键，滑稽会自动加拨9，回拨去电则不考虑添加出局码。
Paragon 400电话回答机用户指南说明书
User GuideParagon 400This product is intended for connection to analogue public switched telephone networks and private switchboards in thePlease open this page for an‘at a glance’guide to your Paragon 400.Please open this page for a further‘at a glance’ guide to your Paragon 400.Allows you to dial and hear if a call has been answered without liftingthe handset.Lets you store and dial a further 10 numbers by pressing just two buttons.Redial the last 5 numbers called. Also lets you enter a pause when storing numbers in the memory.In this guideAt a glance1Introduction4For your records4Unpacking your Paragon 4004Setting up5Safety5Plan the location of your Paragon 4005Using the telephone10Making and ending calls10Using the quickdial memory11Two way recording12Using the answering machine13Selecting the answering machine mode13Using the Mailboxes13To use the pre-recorded outgoingmessage and announcement14Message and Ring indicator16To use Caller return (Auto1471)17Using VIP18Using Remote access19Optional settings21Help23General information24Help and advice23Guarantee24Technical information24Wall-mounting template26Index27Unpacking your Paragon 400If anything is missing, please contact your place of purchase immediately.●Plug mounted, 13 amp mainsadaptor.●Line cord.●Wall mounting plugs and screws.●Plinth for desk mounting●Remote access card.Spare memory label.For guarantee purposes, proof of purchase is required, so please keep your receipt.Enter your Remote access PIN hereSee page 19 for more information about your PIN.Plan the location of your Paragon 400Situate your Paragon 400 close enough to both the phone and mains power sockets so that the cables will reach.Your Paragon 400 should be kept free of dust,moisture, high temperature, vibration and should not be exposed to direct sunlight. Do not stand it on carpets or other surfaces which generate fibres or place it in locations which prevent the free flow of air over its surfaces.Setting upFollow these steps to set up your Paragon 400 ready for use.•Use only the power adaptor supplied.•There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug your Paragon 400 from the mains power and telephone line socket during storms.•The Paragon 400 will produce a certainamount of heat during operation. Whilst this is entirely safe we would advise against placing the product on antique, veneered or wooden surfaces as damage may occur.•Do not use your Paragon 400 in damp, humid conditions such as bathrooms.•Do not expose the equipment to fire or water.•Simply clean your Paragon 400 with a damp cloth (not wet) or an anti-static wipe. Never use a dry cloth as this may cause a static shock.SafetyInsert one LR61 battery (not supplied).The battery compartment must be fully closed for the battery to work.Battery low warningThe display indicates when the battery power is low. If no battery is inserted, it remains lit.21Plug the mains adaptor cord into the L I N EThe Paragon 400 automatically goes through a start up process during which the display shows INITIALISING and the monitor light flashes.On completion the unit display will show the time and number of messages.3Plug the mains adaptor into the wall socket and switch onSETTING UP1Turn around the handset clip to prevent the handset from falling when the product iswall-mounted.2Use the template on page 25 to drill holes in the wall. Leave a small gap between the screw3Place your Paragon 400 over the screw headsand slide down.WALL DESKIf you use your Paragon 400 as a desk phoneyou will need to fit the stand on to the base.Ensure all the cables on the underside of thebase are in their respective channels.Proceed by holding the stand as shown in theillustration, ensuring the two arrows are facingeach other.Now lower the stand so that the two lugsnearest to you, fit into the corresponding holeson base, as shown.Push and squeeze until the stand clicks intoplace from front and back as shown in the inset.ARROWSSETTING UPIf number is being stored as 2 touch (M11-M20) then:Enter the number to be stored.Pressand release the SHIFT button and then press and hold M1-M10until prompt begins.The prompt will say “(telephone number)is stored in memory 11”and display will show M11stored.Using the quickdial memoryYou can store 20 telephone numbers, each up to 32 digits long. The first 10 are stored under the locations M1-M10. The second 10 are stored under the locations M11-M20 using the shift key.TELEPHONETwo way recordingIt is possible to record a telephone conversation.Your Paragon 400 also has two mailboxes which enable you to divide your messages for added convenience, for example, into personal and business messages or for two individual people.To use the mailboxes, your outgoing message should tell callers to press 2or 3on their keypad before leaving their message. Your Paragon 400 will then record the message in Mailbox 2 or Mailbox 3 as selected.For example, an outgoing message could be,“Hello, thank you for calling. To leave a message for Jim, press 2; to leave a message for Janice,press 3; or just speak after the tone ”.If your caller does not select a mailbox, the message is recorded in the main mailbox.Using the MailboxesANSWER MACHINETo use the pre-recorded outgoing message and announcementWhen your answering machine is switched on,the pre-recorded message will automatically greet callers with:“Hello, your call cannot be taken at the moment,so please leave your message after the tone.”Callers can skip this message by pressing #and start recording after the tone.You can replace this message with your own personal outgoing message. The pre-recorded message remains in the memory and you can always choose to use it again.If your answering machine is switched to Answer Only your outgoing message is: “Hello, your call cannot be taken at the moment and you can not leave a message so please call later.”ANSWER MACHINETo playback messages in Mailboxes 2and 3Press the mailbox you want to listen to.The button will light up.Press PLAY and follow the above steps.Message and Ring indicatorThe message indicator blinks when you have new messages or memos. When you have played them back, the indicator goes off. It will also flash when the telephone rings.When your answering machine is set to answer ON, the display shows the total number of messages stored.ANSWER MACHINETo use Caller return (Auto 1471)Caller return automatically dials 1471 after a caller has left a message on your answering machine and records the announcement giving the telephone number (if available) and the time and date of the call. So even if a caller chooses not to leave a message, you may still have their telephone number recorded.18•Setting the answering delay to 2 rings.•Turning the ringer volume off.•The VIP interrupt tone is played at the loudest volume setting.When VIP is switched off, the settings return to their previous values. Using VIPVIP is an enhancement of Call screening. When VIP is switched on, calls are answered silently by the telephone answering machine.The user gives out a 2 digit code (userdefinable) to callers that they want to hear from.When a VIP caller enters the VIP code during the outgoing message playback or the incoming message record period a distinctive audible alertis given to inform the user locally that a ‘VIP ’ is trying to get through.The default setting is OFF .19ANSWER MACHINEUsing Remote accessYou can switch on your answering machine from another phone and, providing you are using a TouchTone T M keypad, play back your messages and memos.To help keep your messages private, yourParagon 400 requires you to enter a 4-digit PIN.The pre-set code is 0000.20OPTIONAL212223HELPHelpHelp and adviceEmergency callsThe emergency services can be contacted in the UK by dialling 999or 112which is valid in any country that is a member of the European community.No dialling toneCheck that your machine is connected to the phone socket.Display does not come onCheck that your machine is correctly connected to the mains power and that the power is switched on.Check that the mains power cable is plugged in to the back of the machine.Outgoing message does not recordSpeak clearly – within 20cm of the microphone –when recording your message.Incoming message does not recordCheck that your machine is set to ANSWER ON and that the recording capacity is not full.The caller may be speaking too quietly or has a bad connection.Cannot access your machine from another phoneMake sure the phone you are calling from has a TouchTone TM keypad.When entering your security PIN, allow enough time - at least 2 seconds between each digit for your Paragon 400 to recognise each one.To resetIf your Paragon 400 will not respond to anybutton presses, remove the back-up battery and turn off the power for 10 seconds. Turning the power back on will reset your machine toANSWER ON mode. However, please note that during resetting, all messages will be lost.General informationGuaranteeYour Paragon 400 is guaranteed for a period of 12 months from the date of purchase.Subject to the terms listed below the guarantee will provide for the repair of, or at BT’s or its agent’s discretion the option to replace the Paragon 400, or any component thereof, (other than batteries), which is identified as faulty or below standard, or as a result of inferior workmanship or materials. Products over 28 days old from the date of purchase may be replaced with a refurbished product.The conditions of this guarantee are:•The guarantee shall only apply to defects that occur within the 12 month guarantee period.•Proof of purchase is provided.•The equipment is returned to the point of purchase.•This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents.•This guarantee does not affect your statutory rights.Within the 12 month guarantee period:In the unlikely event of a defect occuring, please return the product, with the receipt, to the place of purchase.Outside of the 12 month guarantee period:If your product needs repair after the guarantee period has ended, the repair must meet the approval requirements for connection to the telephone network. We recommend that you call the Helpline and ask for details of our recommended repairers.Instructions for returning the product:If the Helpline is unable to remedy your problem they will ask you to return the product. Where possible, pack the product in its original packaging. Please remember to include all parts, including line cords, power supply units, and the original batteries. (Please note that we cannot take responsibility for goods damaged in transit.) Please obtain and keep proof of posting from the Post Office.If the power failsYou will still be able to make and receive telephone calls on your Paragon 400 even if the mains power fails and there is no back-up battery installed. However, the answering machine will not work until the mains power is restored.Technical information24How many phones can you have?All items of telephone equipment have a RingerEquivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. The Paragon 400 has a REN of 1. Any other instrument provided by BT may be assumed to have a REN of 1 unless otherwise stated. A total REN of 4 is allowed.Connection to the BT telephone network Paragon 400 is fully approved for connection to the BT network provided it is used according to the instructions in this guide. The telephone lines must provide Multi-frequency (TouchTone) dialling capabilities.It may be connected to Direct Exchange Lines and switchboards (PBXs) with new plan (plug and socket) arrangements.Hereby, PDT, declares that this Paragon 400 is in compliance with the essential requirements and other relevant provisions ofDirective/1999/5/EC.The Declaration of Conformance for the Paragon 400 is published on the website /archive/certificates/ paragon/p400cert0001.htmlR&TTE DirectiveThis product is intended for use within the UKfor connection to the public telephone networkand compatible switchboards, which supporttone dialling and time break recall. If in doubtplease consult your service provider.Switchboard compatibility25Wall-mounting template If wall-mounting your Paragon 400,drill two holes for the screws usingthis template and insert the wall Arrayplugs provided (if required).26IndexA daptor cord6 Answering machinedelete personal OGM15 mailboxes13 male/female OGM14 message/ring indicator16 on/off13 playback messages16 pre-recorded OGM14 record memo15 record own OGM14 select answer mode13 B atteriesback-up battery6 battery low warning6 C aller return (Auto 1471)17 Callsend10 make10 Call screening17 D ay9 Deleteall messages16 personal OGM15 quickdial number12 Desk mounting8 Display contrast22G uarantee24H elp and advice23 M ailboxes13, 15 Memo15 Message indicator16 N umber of rings21 O n/offanswering machine13VIP18P layback messages16Q uickdial memorydelete/change number12make a call11store a number11R ecordmemo15memo directly into mailbox15own OGM14Rediallast number10 Remote access19 playback messages20set PIN19switch answering machine on19Ring tone21S afety5 Secrecy10Setting up5Store quickdial number11 Switchboard use25T echnical information24 Telephone line cord7Time9Two way recording12V IP18 change code18incoming calls19on/off18 Volumeearpiece11playback17ringer21W all-mounting8, 2627Offices worldwideThe telecommunications services described in this publicationare subject to availability and may be modified from time to time.Services and equipment are provided subject to BritishTelecommunications plc’s respective standard conditions of contract.Nothing in this publication forms any part of any contract.Touchtone™ is a registered trade mark ofBritish Telecommunications plc in the UK.© British Telecommunications plc 2001.Registered Office: 81 Newgate Street, London EC1A 7AJ.Registered in England No. 1800000.Designed by: The Art & Design Partnership Limited.CE compliant to R&TTE Directive (1999/5/EC)Printed in China. Paragon 400. Issue 1 (5/01) 7。
SAMPO HT-W1101L电话 说明书
2 各部名稱3 本機特點4 來電顯示服務須知5 安裝方法6 使用前設定6 時間設定7鈴聲音樂及音量設定8 鬧鐘時間設定9 勿打擾功能的設定9 暫切時間的設定10 撥號方式的設定10 防併機盜撥設定11 本地區域碼的設定12 出局碼的設定13 對比度的設定14 IP的設定16 預覽撥號報號的設定17 來電語音報號的設定18 接聽電話19 撥打電話20 預覽撥號1 功能操作821 保留功能22 重撥功能23 暫停功能23 暫切功能24 記憶鍵的使用25 音量鍵設定26 長途控制鎖功能28 來電記憶使用30 撥出記憶使用3233保養方法電池34363737故障排除緊急處理方法關於售後服務免責聲明3具保留、重撥、暫停、暫切及預覽撥號功能液晶顯示幕對比度可調整具有鬧鐘功能鈴聲及免持音量大小可調整具背光顯示幕長途控制鎖及防併機盜撥功能可記憶、查詢50組最新來電及15組撥出的號碼具2組記憶鍵FSK/DTMF雙制式自動兼容來電顯示，來電訊息自動識別接收具來電語音報號功能具預覽撥號報號功能具和弦鈴聲來電顯示的服務,是由您所在地的電信局所提供!便於您選擇接聽或追查惡意電話,在無人接聽時,能將來電號碼及時間紀錄下來,供您查閱使用。
如您裝好話機,仍無法顯示來電號碼,請向所在地電信局申請。
若對方所在地未開通來電顯示服務或使用投幣電話、國際電話....等,您的電話無法顯示來電的電話號碼。
若話機與外線之間接有小型交換機（總機）、防盜器、分機、傳真機....等,將影響來電顯示的功能。
若府上有使用ADSL寬頻上網,請記得使用濾波分離器（Splitter）以免來電顯示不完整。
若您還未申請或未開放來電顯示服務,本話機可當普通電話使用。
若要查詢家中電話是否已開放服務,請撥電話:4121111(免加區域碼)撥通後，再輸入666#，依語音指示查詢。
來電顯示服務特別注意事項查詢電話5將聽筒曲線的一端插入話機左側插孔，另一端插入聽筒曲線接口。
宝工 MT-8004来电显示型查线电话机 使用说明书
MT-8004 Telephone Line Tester User manual1st Edition, 2024©2024 Copy Right by Prokit’s Industries Co., Ltd. Thank you for purchasing the MT-8004 Telephone Linetester. This tester has the function of automatically detectingFSK and DTMF call information, super lightning protectionand so on. It can meet the requirement of all kinds of switchphones both at home and abroad. As this phone has manyfunctions, It looks beautiful and small in appearance andeasy to carry and use ,so please read the Instruction Manualcarefully before you use it.I.Features:1.FSK and DTMF caller ID display, automatic detection.2.Backlight: Adjustable brightness.3.Redial, callback, Flashing function.4.Overvoltage protection.5.16 groups of outgoing call storage.6.62 groups of dynamic call storage.7.32-bit pre-dialing and error correction function.8.Tone or Pulse dial mode select, suitable for differenttype telephone systems.er instructions1.The preparation before usingPut the plug of the arranged phone line insert into theoutlet of the phone tester and put the other end inexternal wire. Then the screen shows the initial time, andthe phone is in available.2.Exterior line qualityThis check phone is like cordless phone, if you need tocheck the landline number, press the switch to dial yourown phone or other phone number to query thelandline number, and use with alligator clips to querywhen checking telephone exchange room, which isconvenient and simple.3.Internal line queryAccording to the instructions from the switch, the testercan automatically receive call back and then check theinternal line.4.Dial and call operationTo answer the phone call: Make the phone hang up.Answer the phone directly by press the “ON/OFF”button when hear the ring. Directly press the“ON/OFF” button, call when hear the dial tone. Thedial number shows in the screen. Talking can beginwhen connected and hang up when finish.You can choose Tone or Pulse dialing through the“T/P” switch. T—Tone dialing; P—Pulse dialing.5.Flash functionThe user can use the phone tester to dial two phonenumber at the same time.Using the phone tester to dial the user A number, duringthe call, press the “FLASH” button, after hearing dialtone, dial the user B number to have a call; if fail to call,press the “FLASH” button to continue calling with theuser A.III.Set up the system1.When the phone hangs up, press the “SET” buttonand the screen shows “ ”, and this time,press “UP” o r “DOWN”, the LCD screen will showdifferent options. Press “SET” button again to enterthe next option. Press “UP” o r “DOWN” t o set thedetail, and press “DEL” button to exit.2.Set up the time/date when the phone hang up, press the“SET” button and the screen shows “ ”then press “UP” or “DOWN” to adjust the year,press the “SET” button to confirm. Then continue setthe date and clock in the same way. Press the “DEL”button can exit.3.Set up the code when the phone hangs up, press the“SET” button and then press “UP” or “DOWN” to make the screen showing the “ ”. Press the “SET” button, the screen shows “CODE -----”, press “UP” or “DOWN” button at the first “-”to choose the number from 0 to 9. After selecting the No.1, press“SET” button to set the No.2 and so on.4.Set up the Pcode when the phone hang up, press "SET”button and then press "UP” o r “DOWN” to make the screen showing the “”, then to enter into area code setting. Press the “SET” button, the screenshows “PCode –“.Press the “UP” or “DOWN”button at the first “-”to choose the number from 0 to9. After setting the PCode, press the “SET” button toenter the next option. When dialing the pre-dial number, memory number and caller ID, if the number is greaterthan or equal to 6-bit and the first. Bit is different withPCode, the phone tester will automatically add PCode.When dialing the outgoing number is not considered to add the PCode. When adding an automatic IP number,the phone tester will dial the IP number after dialingPCode, to adapt to the switches, the phone tester willautomatically suspend for 1s after dialing the PCode.In the locked state, the phone does not lock out thePCode, but will consider locking the number behind the PCode.NOTE: When the lock is locked, the PCode cannot beset.IV.Incoming and Out Call Storage/Check/ RD & Del 1.Incoming Call storage and check:This phone tester can identify, receive, storage callnumber and talk time. It can store at most 62 groups ofnumbers. User can check, delete, re-call the coming callnumbers.Check the incoming number: Press the “UP” buttoncan show the last call number and time. Press the“DOWN” button can show the next call number andtime.Re-dial the number: Press the “RD” button, the phonewill dial the show number automatically. Talk whenconnected. Press the “RD” button twice continuously,the phone will re-call automatically.Delete: Press the “DEL” button to delete the callnumber. All the call numbers will be deleted when pressthe “DEL" button for 4 seconds.2.To store and check the dial number and time:After dialing the number for 8 seconds, the phonebegins timing automatically. The dial number will bestored after hanging up. It can store at most 10 groups.User can check, delete, re-call the call numbers.Check the dial number: Press the “OUT” button cancheck the dial number and time. Each press of thisbutton displays one number, cycling through themsequentially.Call back the number: Checking the outgoing number,then press “RD” button to dial the numberautomatically.Redial the number: When calling, if have a busy tone,please hang up again and then press the “RD” buttonor directly press the “RD” button, the phone willautomatically take the line once and then redial.V.Attention1.Caller ID displayThis function can be used only after registering from theTelecommunications. Small switchboards, antitheftmachines, splitters cannot be used between the phoneand external wires, otherwise it maybe has the badinfluence on the Caller ID display function. To receive thecall information completely, it is best to pick up thephone after two rings.2.Fault handleIf find the phone not in the normal way, unplug theexternal wire and then insert it again after 10 minutes, thephone will come to normal.VI.LCD BRIGHTNESS LEVELPress the “FLASH” butto n to adjust the brightness of thedisplay. The LCD display “LCd 3”. Each press “FLASH”button adjusts the setting once, cycling through the optionsfrom 1 to 5 sequentially.VII.Specification:PROKIT’S INDUSTRIES CO., LTDEmail:***************.com.tw©2024 Prokit’s Industries Co., LTD. All rights reserved 2024001(a)。
电话机用户手册说明书
USER MANUALPlug & Play with built-in OGMsPermanent memories: no tape,no battery14 minutes memory capacityCuckoo new-messageaudio reminderOne-touch Do Not Disturb functionRecordable ringerBuilt-in selectable ringing melodiesDo Not Disturb Ringer Light IndicatorDigital Receiver Volume Control3 Direct Memories and 10 Indirectphone memoriesApproved useThis telephone is approved for connection to direct exchange lines of the Public Switched Telephone Network (PSTN) and compatible PBXs (please ask your supplier for an up-to-date list) but not for connection in the following manner: • as an extension to a payphone• on a shared service line or 1 + 1 carrier system.This apparatus has been approved for the use of the following facilities:• Call screening/intercept • Memo recording• Audible and visual indication of messages • Power/message indicator • Remote accessAny other usage will invalidate the approval of the apparatus if as a result it then ceases to conform to the standards against which the approval was granted. It cannot be guaranteed that this apparatus will operate correctly under all possible conditions of connection to compatible PBXs. Any cases of difficulty should be referred in the first instance to your supplier. This apparatus is suitable for connection to PBXs that return secondary proceed indication.Please note that when connection is made to any PBX, the last number redial facility must not be used.While listening to the message playback, you can do the following:Press [7] to repeat a messagePress [8] to play/stop message playback Press [9] to skip forward to next message Press [7] [7] to play previous messagePress [0] to erase the message being played Press [1] to select Mailbox 1Press [2] to select Mailbox 2Press [3] to select Mailbox 3Press [4] to select Mailbox 4Press [5] to exit from a MailboxPress [6] to access for OTHER COMMANDS Press [] to listen to menu functionsThe Other CommandsPress [1] to switch to Answer Record mode.Press [2] to switch to Answer Only.Press [3] to switch the Answer off.Press [4] to record a new Answer Record message or to stop recording Press [5] to record a new Answer Only message or to stop recording Press [6] to activate the room monitoring function.Press [7] to change the PIN Code.Press [8] to stop/playback messages or to return to first set of commands.Press [] to listen Help Commands.Press [#] to exit the remote control functions.Note:Please use the power adaptor and telephone line cord provided in this package.Technical SpecificationPower Requirement:9V AC, 400mA Length of messages:Outgoing messages Incoming messages MemoNumber of messages:Memory Capacity (total recording time):14 minutes (approximately)minimum maximum 3 seconds-- 3 minutes 3 minutesmemory capacity60 (max.)Dear Customer,Thank you for purchasing this Philips product which has been designed and manufactured to the highest quality standards.If, unfortunately, something should go wrong with this product Philips guarantees free of charge labour and replacement parts irrespective of the country where it is repaired during a period of 12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer's name and model and production number of the product.The Philips guarantee may not apply if:•the documents have been altered in any way or made illegible;•the model or production number on the product has been altered, deleted,removed or made illegible;•repairs or product modifications and alterations have been executed by unauthorised service organisations or persons;•damage is caused by accidents including but not limited to lightning, water or fire,misuse or neglect.Please note that the product is not defectiveunder this guarantee in the case where modifications become necessary in order for the product to comply with local or national technical standards which apply in countries for which the product was not originally designed and/or manufactured.Therefore always check whether a product can be used in a specific country.In case your Philips product is not working correctly or is defective, please contact your Philips dealer. In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.In order to avoid unnecessary inconvenience, we advise you to read the operating instructions carefully before contacting your dealer. If you have questions which your dealer cannot answer or any related question please write or call:Philips Consumer Help DeskUnit 4, Elmwood, Chineham Business Park,Crockford Lane, Basingstoke, Hampshier RG24 8WG, United Kingdom.Phone : 0645 282828Fax : 01256 707335Philips Electronics Ireland Ltd Newstead Clonskeagh Dublin 14IRELANDPhone : (01)-7640000Fax : (01)-7640175U K & IRELANDyour international guaranteeOperating the remote-control featureYou can give commands to your answering machine from another telephone by entering the 4-digit remote code.1.Dial the telephone number.2.The answer machine will answer after the number of set rings. (If it is set in Answer-Off mode, it will answer after 9 rings).3.Press to activate the remote functions.4.Enter your personal remote pin code then the messages will start to playback.5.Once all the messages have been played, the voice prompt will say “No more messages ”.6.Press to listen to the Help commands.Note :If an incorrect PIN code is entered, the voice prompt will say “Incorrectcode, please try again ”. Please enter your remote code again.-There is only three attempts to enter your PIN code.-If silence is maintained for 7 seconds, the voice prompt will say “press the for help ”.-Accessing your remote control, the display will show “00”.Listening to Incoming messages from the mailboxesThere are 4 mailboxes.To listen to messages from mailbox:1.Press the , then the display will show “01”.2.If there are any new messages, the mailbox symbol will flash.3.After 2 seconds, the display will change to show a flashing number of new messages in the mailbox.4.Play the messages.5.Press the Button to skip back to the previous message or press the next button to forward to next message.To listen to messages from other mailboxes:1.To listen to messages from mailbox 2, press the again.2.The display will show the mailbox symbol and the number 2.3.Please follow the same procedure as stated above for all mailboxes.To exit from the mailboxes and return to main store:After listening to last message in mailbox 4, press the and you ’ll return to main store.Note:During the time-out after the playback of messages in a mailbox, if you donot press any keys for 30 seconds, the answering machine will return to main store.Erasing the messagesTo erase old and listened messages:1.Press the erase key for 2 seconds while no messages are playing.Note: No new messages will be erased in order to prevent accidental erase.To erase individual messages:1.Press the erase key while the message is playing or at the end of the message before the next message starts.Operating the Cuckoo FunctionThe “Cuckoo ” function is an audio reminder that will ring every 10 minutes to remind you that there is a new message.1.Press the to turn this function “On ”, then the LED light up.2.Press theagain if you wish to turn off this function.Operating the Do Not Disturb FunctionDo not disturb function offers privacy and convenience.This function switches off all audio functions from the answering machine ringer and “cuckoo ” function.1.Press the “Do Not Disturb ” button, to turn on this function, then the LED will light up.2.If you wish to turn off this function and reactivate the other functions, press “Do Not Disturb ” button.Note:When the Do Not Disturb function is “On ”, thefunction is automaticallydeactivated, and the LED is switched off.Volume ControlIf you wish to change the volume, just push the slider up or down to the desired level.Recording a MemoYou are able to leave a message for your household members through this feature.During recording, the telephone line must be inactive and the machine must be in Answer Off mode.1.Press Answer Mode Button to Answer Off mode and the Answer Off Indicator is light up.2.Press Record button.3.After the beep and the displays shows “uc ”, speak your memo.4.Press Play/Stop or Record button to stop recording.5.After the rotating “uc ” stops, the memo will playback.6.Press Answer Mode Button once or twice to restore to previous setting.LowHighSetting the Remote CodeWhen using the answering machine for the first time, the remote code is “0000”.For the sake of security, please record and use your own 4-digits Remote Code.1.Press and the VoiceHelp will say “ PIN Code is...” and the display will show “PC ”2.Press or to change each number in your code, then once the digit you desire is displayed, press to confirm. Repeat this step for all 4 digits.3.After the fourth digit is selected, press to confirm.4.Then the VoiceHelp will repeat the selected 4-digits New Remote assess code.5.The system will exit the Menu setting mode and return to stand-by mode.Note:During the setting, system will exit the Menu mode in case of:no subsequence commend for more than 30 seconds, or pressing the PLAY / STOP key, or there is an incoming call.Return to the Menu settings, press .Answer/Record mode:If you want the machine to answer as well as record the incoming calls:1.Press once or twice, then LED - ANS/REC will light up.2.After 2 seconds, the OGM will be played.Note: During playback, the display shows “A1”Answer Only:If you want the machine announce the outgoing message to the incoming calls without recording.1.Press MODE once or twice until the LED - ANS ONLY is light up.2.After 2 seconds, the OGM will be played.Note : During playback, the display shows “A2”Answer Off:To turn off the Answering Machine:1.Press once or twice until the LED - ANS OFF is light up.2.The display shows “- -”3.VoiceHelp will announce:“Answer Off mode, to record your memo, please press , to stop recording,press STOP.”4. In case of no further command within 30 seconds, the display will show the number of messages in the machine.ANS/RECANS ONLYThank you for calling, you are connected to an answering machine, please leave your message after the beep.Thank you for calling, you are connected to an answering machine, please call later.Select your answering modeELEGANCE 99 is defaulted to answer and record the incoming calls, Answer/Record mode. To hear the default Outgoing Message (OGM), press the MODE key until the display shows “A1” and the Answer/Record Indicator is light up.ANS/REC ANS ONLY ANS OFFHow to record your outgoing message:Before recording an outgoing message, please select an corresponding mode either “Answer/Record ” mode or “Answer Only ” mode:To record Answer Record message:1.Press once then Answer/Record indicator will light up2.Press during playback or within 30 seconds of completion.3.After the beep, speak your message. You will have maximum 3 minutes for your announcement.4.Press to stop recording.5.You will hear the recorded outgoing message playback.6.To record again, press and repeat step (2) to (4).7.To confirm, press and return to stand by mode.8.To erase, press during playback. Then the pre-recorded outgoing announcement will be resumed and playback.To record Answer Only:1.Press twice to select Answer Only, then Answer Only indicator will light up and you ’ll hear the current outgoing message.2.Press during playback or within 30 seconds of completion.3.After the beep, speak your message. You will have maximum 3 minutes for your announcement.4.Press to stop recording.5.You will hear the recorded outgoing message playback.6.To record again, press and repeat step (2) to (4).7.To confirm, press and return to stand by mode.Note:When the memory is full, the machine will automatically switch from AnswerRecord to Answer Only.To erase your recorded outgoing message, press during playback.Listening to incoming messagesThe display will flash, indicating the number of new messages in main store.1.Press to listen the new messages. The messages will playback from first one recorded to the last one recorded.2. If you wish to repeat the message, press to repeat the message.3. If you wish to skip the message, press .4. If you wish to erase the message, press the button while the message is playing or before the next message.Note:If there are new messages in both main store and mailboxes, the 2 digit LEDwill only signaled.- If there are no new messages in the main store but in the mailboxes, a mail box symbol will flash in the display.-If there are no new messages either in the main store or the mailbox,then the display will show the number of old messages in the main store but it will not flash.-If there are no new or old messages at all, the display will show “0”motionless.To record Incoming message in Mailboxes4 Mailboxes are providedNot only to leave message in main store, the caller can choose to leave a message in a particular mail box by pressing the mailbox key.1.The OGM message will be played after the set number of rings.2.Press the mailbox key after the OGM e.g. press (1) for Mailbox 1, press (2) for Mailbox 2. It is the same for Mailbox 3 & 4.3.The machine will start recording incoming calls in particular mailbox.or。
电话机使用说明书
1820C型电话机使用说明书一、简要说明感谢您选择1820C型电话机，此产品可用于家庭分机使用及酒店专用电话机。
您可以通过阅读本手册，全面地了解901电话机的使用，领略其完善的功能和简洁的操作方法。
二、产品功能1）拨号暂停功能2）最后一组号码重拨3）静音功能三、产品安装及使用1.打开彩盒，取出电话机与2根电话线，把话筒曲线一头（两头不分）插入主机左侧面的插孔，另一头插入话筒手柄的插孔；将另外一根电话线（两头不分）一头插入电话机后面的插孔，另外一头插入墙板的电话口。
2.打开主机背后的电池盒后盖，按照正确的+-极性装入3节7号电池，盖上后盖，此时电话机屏幕应该有显示，否则电池没有装好请重新检查直至屏幕显示正常；3.提起话筒，听筒应该听到“嘟--”拨号提示音，说明接通，可以正常使用了。
如果无声，请检查电话进线是否接触正常。
看图：四、产品常见故障现象及维护方法1、铃声异常（1）电话机挂机时铃响不断。
一般是电话机振铃电路中的电容被击穿短路，使收铃器输入失去直流作用。
挂机时外线直流外线馈电电压为振铃集成IC提供工作电源，所以挂机时铃响不断。
一般只要更换打振铃电容就可以了。
如果振铃电容没坏，应检查抑制电路板是否漏电或是否由于焊点处理不当而短路。
（2）铃声小。
检查在收铃状态下集成IC的直流电压是否为25~27V。
若低于正常值较多，应检查输出耦合电容是否漏电或击穿短路，若电压基本正常，应检测输出衰减电阻阻值是否变大，开关、线圈是否局部短路，否则就是IC性能不良。
2、无振铃当电话机出现无振铃故障时，要在振铃状态下按以下步骤检查。
①测量整流桥输入交流电压。
正常时约为60V；若接近0V，应检测振铃电容和降压电阻是否断路，开关是否损坏或引线是否脱焊。
②测量振铃IC的直流电压。
正常时为25~27V；若接近0V，应检查整流、滤波电路是否被击穿短路，整流桥是否有二极管损坏，否则就是振铃IC内部短路。
3、无送话用镊子碰通话集成IC时，从受话放大器中听到感应交流杂音，说明是送话输入电路有问题，应检查话筒线、送话器及供电可调电阻是否良好；外围元件是否接触不良。
Philips CD155电话机用户手册说明书
Register your product and get support at /welcomeCD155Call from the phonebook1.Press d in idle mode.2.Scroll : to a phonebook entry.3.Press r .The call is initiated.Listen to messages recorded on the answering machine (for CD155 only)Presso on the base station to turn on the answering machine (the LED is turned on).Press o again to turn off the answering machine (the LED is turned off).Press p on the base station to play phone messages (the first recorded message will be played first).Presss to skip the current message and play the next message.Press R to go back to the previous message (if pressed within 1 second of currentmessage playback).PressR to replay current message (if pressed after 1 second of current messageplayback). Press-+ to adjust speaker volume during message playback.Press f to delete the current message.Refer to your CD155 User Manual for details about the answering machine function.TroubleshootingFor more information, please refer to the User Manual that came with your phone.Welcome to Philips!Register your product and get support at /welcomeNeed help?User ManualRefer to the User Manual that came with your CD150/155.Online help/supportProblemSolution• There’s no dialling tone!• Check the connections • Charge the batteries• Use the line cable provided• Caller cannot hear me clearly!• Move closer to the base station• Move the base station at least one metre away from any electrical appliances • SEARCHING... isdisplayed on handset andicon is blinking!• Move closer to the base station• Reset your unit and restart the handset registration • Calller number is not displayed!• Check your subscription with your network operator©2008 Koninklijke Philips Electronics N.V. All rights reserved.Reproduction in whole or in part is prohibited without the written consent of the copyright owner.Document number: 3111 285 42441 (US-EN) Connect Install Enjoy123Quick start guideEnjoy3Make a callDial the number (maximum 24 digits) and press rkey.OR Press r or vkey to take the line and dial the number (maximum 24 digits).Answer a call When the phone rings, pressr key.End a callTo end a conversation, presse key.Adjust earpiece volumeDuring a call, press: to select from VOLUME 1, VOLUME 2 or VOLUME 3,Store a contact in the phonebook1.Pressm key in idle mode, scroll : to PHONEBOOK and press <OK , press<OK to enter NEW ENTRY .2.ENTER NAME is displayed on the screen.3.Enter the name of the contact (maximum 12 characters) and press <OK .4.Enter the number (maximum 24 digits) and press <OK .A validation tone is emitted.Access the phonebook1.Press d in idle mode and scroll : to browse the phonebook.2.To view the details, press <OK .Set the ring melody1.Pressm key in idle mode, scroll : to PERSONAL SET and press <OK ,scroll : to HANDSET TONES and press <OK , scroll : to RING TONES and press <OK .2.Scroll : to your desired melody to play the melody.3.Press <OK to set the ring melody.A validation tone is emitted and the screen returns to previous menu.What’s in the boxHandsetBase station withbracket for CD150ORPower supply 2 AAA rechargeable NiMH batteriesBattery doorGuarantee User manual *You may find in the box the line adaptor delivered separately from the line cable. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.In multihandset packs, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries.WARNING Always use the cables and batteries that came with your phone.Line cord*CD155Belt clip ConnectConnect the base stationInstallInsert rechargeable batteries and charge12。
OMEGAPHONE八区温度报警电话报警器说明书
G-9ߜMonitors Eight Channels ofTemperature Input and PowerߜProgram up to Four 20 Digit Phone Numbers ߜWorks with Telephone PagersߜWall Mount Enclosure ߜOptional 4-Line DisplayModel OMA-VM500-5 monitors up toeight independent temperature zones and dials up to four phone or pager numbers if the temperature in any zone goes out of limits or if there is a power outage. The integrated voice tells you which zone is out of limits and the current temperature.You can call the unit at any time to hear a report on the temperature of any zone and power status.The OMA-VM500-5 is easily programmed over the phone. Simply locate thesensors in the areas where you want to measure the temperature. Plug in the phone line and the power adapter and turn the unit on. Call the unit from another phone or cell phone and follow the spoken instructions to program the temperatue limits and the emergency phone numbers. The system is now programmed and is monitoringtemperature and power at your facility.SpecificationsNumber of Temperature Inputs:8Input Type:2-wire 100 Ohm Platinum RTD,alpha= 0.00385Temperature Measurement Range: -200 to 200°C (-328 to 392°F); unit is set up factory default for Fahrenheit operation (for Celsius operation add suffix "-C" to model number)*RTD elements with longer leads are available.Consult Enginnering.Each unit is supplied with complete user’s manual. To order unit configured for degrees Celsius operation add suffix "-C" to model no., no additional charge. To order unit with optional 4-line LCD display add suffix "-LCD" to model no. and add $100 to price.Ordering Example: OMA-VM500-5-B20 eight channel automatic temperature alarm dialer with 20-hour battery backup and OMEGACARE SM 1-year extended warranty for OMA-VM500-5-B20 (adds 1 year to standard 1-year warranty), $380 + 38 = $418.Starts at$345OMA-VM500-5, $345,shown with Optional LCD DisplayAccuracy:+2°FHigh and Low Temperature Limits:ProgrammableTelephone:Standard RJ11 phone jack connectionTelephone Numbers:Stores up to four phone numbers up to 20 digits longPersonal Identification Message:Record up to a 10-second message over the phone Operation:Operates with answering machine on the same phone line Display:Optional 4-line LCD display shows the current, max and min temperatures for each zoneAlarm Notification:Alarm siren sounds and alarm relay closes if the temperature goes out of limits in a zoneAlarm Cancellation:Pushbutton on front of the unit silences the alarm and cancels emergency telephone calls Alarm Relay Output:5A, 250 VacPower: powered from included 120 Vac wall mount transformer power supply Battery Backup:4-hour rechargeable battery backup; 20 or 30 hours optional Operating Ambient: 0 to 52°C (32 to 125°F)Electrical Connections:Plug-in terminal block Dimensions:117 H x 223 W x 57 mm D (4.62 x 8.79 x 2.26")Material: ABS plastic Weight:0.9 kg (2 lb)CANADA www.omega.ca Laval(Quebec) 1-800-TC-OMEGA UNITED KINGDOM www. Manchester, England0800-488-488GERMANY www.omega.deDeckenpfronn, Germany************FRANCE www.omega.frGuyancourt, France088-466-342BENELUX www.omega.nl Amstelveen, NL 0800-099-33-44UNITED STATES 1-800-TC-OMEGA Stamford, CT.CZECH REPUBLIC www.omegaeng.cz Karviná, Czech Republic596-311-899TemperatureCalibrators, Connectors, General Test and MeasurementInstruments, Glass Bulb Thermometers, Handheld Instruments for Temperature Measurement, Ice Point References,Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders Relative Humidity Measurement Instruments, RTD Probes, Elements and Assemblies, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching Devices, Thermistor Elements, Probes andAssemblies,Thermocouples Thermowells and Head and Well Assemblies, Transmitters, WirePressure, Strain and ForceDisplacement Transducers, Dynamic Measurement Force Sensors, Instrumentation for Pressure and Strain Measurements, Load Cells, Pressure Gauges, PressureReference Section, Pressure Switches, Pressure Transducers, Proximity Transducers, Regulators,Strain Gages, Torque Transducers, ValvespH and ConductivityConductivity Instrumentation, Dissolved OxygenInstrumentation, Environmental Instrumentation, pH Electrodes and Instruments, Water and Soil Analysis InstrumentationHeatersBand Heaters, Cartridge Heaters, Circulation Heaters, Comfort Heaters, Controllers, Meters and SwitchingDevices, Flexible Heaters, General Test and Measurement Instruments, Heater Hook-up Wire, Heating Cable Systems, Immersion Heaters, Process Air and Duct, Heaters, Radiant Heaters, Strip Heaters, Tubular HeatersFlow and LevelAir Velocity Indicators, Doppler Flowmeters, LevelMeasurement, Magnetic Flowmeters, Mass Flowmeters,Pitot Tubes, Pumps, Rotameters, Turbine and Paddle Wheel Flowmeters, Ultrasonic Flowmeters, Valves, Variable Area Flowmeters, Vortex Shedding FlowmetersData AcquisitionAuto-Dialers and Alarm Monitoring Systems, Communication Products and Converters, Data Acquisition and Analysis Software, Data LoggersPlug-in Cards, Signal Conditioners, USB, RS232, RS485 and Parallel Port Data Acquisition Systems, Wireless Transmitters and Receivers。
Suncorp,电话机,说明书Colombo Two
5. 菜单和功能......................................................................8
5.1 出厂设置 ..............................................................................9
11. 故障排除 .....................................................................13 12. 常规说明 .....................................................................14
2
1. 欢迎 ................................................................................2
1.1 1.2 1.3 功能 .....................................................................................2 盒内配备物 ..........................................................................2 重要事项 ..............................................................................2
7. 电话本 ...........................................................................10
详细的电话机使用说明书
IR-1503S M Rs-232 422 485 串口线电话机说明书
itRobConverterVIN+-FiberIR-1503SRS-232/422/485Singlemode Fiberoptic ConnecterVariable Baud Rate Surge Protection Self-TunerRXDTXD PWR D/T+D/T-GND+5VVIN GND Power InputRS-422/485R+R-TXDRXDRS-232FIBER TX FIBER RXPower InputitRobConverterVIN+-FiberIR-1503MRS-232/422/485Mutimode Fiberoptic ConnecterVariable Baud Rate Surge Protection Self-TunerRXDTXD PWR D/T+D/T-GND+5VVINGNDPower InputRS-422/485R+R-TXDRXDRS-232FIBER TX FIBER RXPower Input转换电路转换电路RS-485收发电路光接收电路光发射电路RS-422收发电路RS-232收发电路电源稳压电路流控电路IR-1503S/M 有源RS-232/422/485转光纤转换器产品说明书1. 产品简介IR-1503是一款工业级串口（RS-232/422/485）光纤媒质转换器。
采用合金外壳，支持工业导轨式安装、壁挂式安装等多种安装方式，同时提供RS-232/422/485接口。
可实现RS-232/422/485串行信号通过光纤的远距离传输，可以有效延长串行通信信号的传输距离。
该产品克服了传统串行通信的距离短、抗干扰能力差的缺点，同时也解决了电磁干扰、地环干扰以及雷击和浪涌的难题，极大的提高了数据通信的可靠性、安全性和保密性。
IR-1503系列产品分为两种型号，分别为IR-1503S和IR-1503M。
这两种型号产品的具体区别如下表所示：2. 产品特点◆光纤接口采用双ST（FIBER-TX、FIBER-RX）接口◆串口端物理接口为10位接线端子形式◆串口端同时提供RS-232、RS-422和RS-485三种接口◆RS-485采用先进的自动流控技术，可自动识别信号流向◆RS-485/422采用引脚服用技术，RS-422与RS-485共用D/T+和D/T-端子◆串口端自适应RS-232、RS-422和RS-485接口，无外部工作方式选择开关，使用更简单、更方便◆同时提供两种形式电源接口，接线柱方式和插座方式，实际使用时接哪个口都可以◆提供电源和信号方向（←和→）三个指示灯，方便用户查看通信状态◆外壳为合金外壳，坚固、耐用，既可实现面板安装也可实现工业导轨安装3. 性能指标通信电接口RS-232信号：RXD、TXD、GND（三线全双工）RS-422信号：T+、T-、R+、R-（四线全双工）RS-485信号：D+、D-（两线半双工）通信速率50bps～115.2Kbps自适应支持点数32个节点（标准负载）防雷保护RS-422/485端：防雷保护容量600W/ms保护开启电压：6.8V 静电保护电压：15kVRS-232端：静电保护电压：15kV 光纤接口双SC接口（FIBER-TX、FIBER-RX）接收灵敏度单模：-28dBm 多模：-32dBm 电源电压同时提供两种供电电压VIN和+5V VIN输入范围为：+8～40VDC +5V输入范围为：+5VDC工作温度-40℃～85℃光纤传输距离单模：0～20Km 多模：0～2Km 电源接口同时提供接线端子和同心插座两种接口发射光功率单模：-6dBm 多模：-15dBm 功耗<0.5W 湿度0～95%（不冷凝）尺寸见图5流控方式RS-485端为自动流控串口通信距离RS-232: 15mRS-422/485：0～1.2Km（速率越高距离越短）波长1310nm适用光纤单模：9/125μm多模：50/125μm或62.5/125μm图1IR-1503S 单模光纤接口（波长1310nm ）IR-1503M多模光纤接口（波长1310nm ）4. 系统结构框图图25. 接口与信号6. 电源为了使IR-1503能够适应大多数场合，IR-1503提供了两种范围的直流电源输入方式，+5VDC和VIN（+8～40VDC）两种电源输入范围。
Philips BeNear 电话机电子书说明书
Philips BeNearCordless phone with answering machine45 min answering machine2.0" display/ white backlight Speakerphone 2 handsetsCD4952BBringing people closerSuperior sound meets sophisticated styleNow you can enjoy the exceptional sound quality of HQ-Sound, a large, easy-to-read black on white display and premium style cues of a new design. It is a sophisticated elegance, at an intelligent price.Exceptional sound•HQ-Sound: high quality acoustic engineering for superb sound •MySound profiles to match your sound preference•Full-duplex echo cancellation ensures a smooth conversation •Optimized antenna layout for great reception in any room •Handset speakerphone allows you to talk handsfree As simple as ever•Easy to read, 5.1 cm (2.0") black on white display •Icon-based menu for easy navigation•Up to 45 min. message on your answering machine •Save up to 200 favorite contacts in your phonebook •Up to 20 hours of talk timeEco-conscious product•60% reduction of radiation when ECO mode is activated •Low power consumption: < 0.55 W in stand-by modeHighlightsHQ-SoundPhilips cordless phones with HQ-Sound: build upon decades of experience and breakthrough innovations in developing Hi-Fi audio products and high-end headphones to deliver excellent voice clarity on our DECT phones. When it comes to improving sound quality, our acoustics engineers and architects have thought of everything – high qualitycomponents, digital signal processing, precise acoustic design, advanced testing and fine-tuning. The result is sound that is crisp, clear and authentic. Sound so good and natural, it is almost like being there in person.Full-duplex echo cancellationNatural conversation does not involve taking turns – there is always some natural overlap. Now thanks to our full-duplex echocancellation, you can hear perfectly, even if you are both talking at the same time.MySound profilesSound perception is subjective, and everyone has their own listening preference. MySoundbrings personality back to every conversation by allowing you to choose the audio profile that best matches your sound preferences: Clear – to make voices sound crisper and clearer; Soft – for friendly, softer tones; Warm – to make voices sound welcoming and warm.Handset speakerphoneHandsfree mode uses a built-in loud speaker to amplify the voice of the caller, allowing you to speak and listen during a call without holding the phone to your ear. This is especially useful if you want to share the call with others or simply multitask.200-name phone bookAlways have the phone numbers of your loved ones available: Save up to 200 names in your phonebook.5.1cm(2.0")black/white displayEasy to read, 5.1 cm (2.0") black on white displayIcon menuWith an easy-to-use, modern icon menu, you can find everything you need at a glance.Up to 45 min. recordingWith up to 45 minutes recording time, you’llnever miss an important message.Philips Green LogoPhilips Green Products can reduce costs, energy consumption and CO2 emissions. How? They offer a significantenvironmental improvement in one or more of the Philips Green Focal Areas – Energy efficiency, Packaging, Hazardous substances, Weight, Recycling and disposal and Lifetime reliability.Issue date 2019-05-31 Version: 4.0.412 NC: 8670 000 79979 EAN: 87 12581 61369 3© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsSound•HQ-Sound•Sound Profile: MySound•Volume control on handset•Ringtones on handset: 10 polyphonicPicture/Display•Display size: 5.1cm / 2.0"•Display type: FSTN reverse - dot matrix •Backlight: Yes•Backlight color: WhiteAnswering Machine•Recording time capacity: up to 45 minutes •Pre-recorded OGM•Message counter on base: Amber counter ( 2 x 7 segments)•Answering machine control: from base & handset •Loud speaker on baseConvenience•Menu structure in the handset: Icon Menu •Speakerphone - talk handsfree •Personalization: Silence mode and Night mode •Call barring: Restrict the phone from making specific outgoing calls•Signal strength indicator: 3- bar indicator •Battery level indicator: 5- bar battery icon •Intercom - multiple handsets•Room monitoring•Date/Time display•Alarm Clock•Event light on the handset•Programmable hot keys: Key 1 and 2•Call Management: Call Waiting*, Caller ID*, Microphone mute, Missed Calls, Received Calls •Key tone on/off•Auto Registration•Auto hang up•Multi base capability: 1•Multi handset capability: Up to 5•Number of keys: 22•Backlit keypad: White•Enlarge dialing digit •Base Station keys: Paging key•Up to 20 hrs talk time•Up to 300 hrs standby time •Charge time: 8 hours•Line cord length: 1.8m•Power cord length: 1.8m•Range: Open field <300m; in door <50m •Keypad lockMemory Capacity•VIP Caller Identification •Phonebook: 200 names and numbers •Redial List Capacity: 20 entries•Call log entries: 50 entries •Phonebook store in the basePower•Battery Capacity: 600 mAh•Battery type: AAA NiMH Rechargeable •Mains power: AC 100-240V ~50/60Hz Security•Transmission encryption : Yes Network Features •Compatible:GAPSAR Value•Philips handsets: <0.1 W/kgEco Design•EcoMode: automatic & manual Packaging dimensions •Packaging dimensions (W x H x D): 18.5 x 13.6 x 10.7 cm•EAN: 87 12581 61369 3•Gross weight: 0.725 kg•Nett weight: 0.606 kg•Number of products included: 1•Packaging type: Carton•Tare weight: 0.119 kg•Type of shelf placement: Laying。
摩托罗拉,电话机,说明书EPure(瑞士机)
Yealink IP600电话机用户指南说明书
PERO CON LIMITACIÓN, LAS GARANTIAS DE CALIDAD MERCANTIL O DE ADAPTACION A UN OBJETO PARTICULAR; B) ATLINKS DECLINA CUALQUIER RESPONSABILIDAD POR PÉRDIDA O DETERIORO DE DATOS, INACTIVIDAD, PÉRDIDA DE
Prokit's Industries MT-8003 来电显示型查线电话机 使用说明书
MT-8003来电显示型查线电话机使用说明书1st Edition, 2020©2020 Copy Right by Prokit’s Industries Co., Ltd.概述MT-8003具有来电、去电号码查询，闪断、重拨、回拨、FSK及DTMF来电显示自动检测等功能，足以提供安装模拟式电话线路之所需，防雷击保护功能，能防止因雷击或瞬间高压突波而造成仪器本身的损坏，是一款适合电话安装、监测和维修技术人员的便携式电话查线器。
一、产品特点：1.LCD可显示拨出号码、来电号码、时间及其它信息。
2.自动检测FSK及DTMF来电显示信息。
3.具有来电显示功能，最长可显示16位。
4.支持32位预拨号功能及预拨号删除功能。
5.5段字体明暗调节。
6.去电记忆功能，最多16组8位，内部动态存储最长可存储32位（5组）。
7.来电记忆功能，最多62组8位，内部动态存储最长可存储16位（38组）。
8.音频/脉冲式拨号双切换，适合各国不同交换机。
二、使用说明：1.使用前的准备：把带有水晶头的RJ11线插入本机的RJ11接口，另一端连接到带电设备或者外线上，此时屏幕显示初始化时间、日期，话机处于备用状态。
2.外线查询：此款查话机类似电话子母机，如果需要查询本坐机号码，按开关建可以拨打自己的手机或者其它设备查询本坐机的电话号码，如果机房查询可使用鳄鱼夹查询，方便、简单。
3.内线查询：可根据交换机的功能发送指令，查话机会自动接收回拨，方可查询内线电话。
4.拨号、通话操作：本机摘机方式为按键方式（键盘上设有开/关按键），接听电话：把开关按到“挂机”状态，听到铃声后，直接按“开/关”键接听，拨打电话：直接按“开/关”键，听到拨号音后拨号，所拨号码会显示在液晶屏上，拨通即可通话，通话完毕挂机即可。
5. 字体明暗度调节：查线机待机状态下，连续两次按下“闪断”键，即可进行1至5段明暗度调节。
三、系统设置：1.挂机状态按住[设置]，进入设置状态，LCD 显示，此时，用[上查、下查]键可改变设置项，LCD同时显示对应的设置项。
Polycom S 电话基本功能指南说明书
Features > Contact
Directory.
2. Scroll to the contact whose
information you want to
update, and then press the
Edit soft key.
3. Update the contact
information.
4. Press the Save soft key.
To search for a contact:
1. Press
, and then select
Features > Contact
Directory.
2. Press the Search soft key.
Then, enter the first few
. The
console LEDs will glow red.
You can hear all other parties
while Mute is enabled. The other
parties cannot hear you.
To turn off Mute, press again.
Holding and Resuming Calls
CUSTOMIZING YOUR PHONE
Updating Contact Directory
To add a contact:
1. Press
, and then select
Features > Contact
Directory.
2. Press the Add soft key.
3. Enter the contact information