AutoTrak Curve 旋转导向系统

5°/ 30m 常规RSS
15°/ 30m
3 © 2013 Baker Hughes Incorporated. All Rights Reserved.
致力于非常规能源钻井，让每趟钻更平滑、更省时
井轨更光滑、钻速更快
精确导向
保证准确命中靶点
4 © 2012 Baker Hughes Incorporated. All Rights Reserved. 34882
新一代 旋转导向钻井系统：AutoTrak Curve ™
常规钻井马达
脉冲器/ 发电机
特点
MWD
方位伽玛
技术效益
近钻头井斜
导向头
增斜能力 15° / 30m 近钻头井斜和方位伽玛
可用一套BHA完成增斜段和水平段 精确的井眼几何和地质定位
一体化的钻具组合
最大限度地不占用钻机时间
更坚固的设计、 更简单的电子组件
不同点3：源于AutoTrak
• 最大造斜率15°/100’ • 耐受大颗粒泥浆堵漏剂 • 提供近钻头自然伽马测井 • 可选择停泵测斜 • 可以与普通马达配合使用 • 与休斯钻头一体化使用
泥浆脉冲/供电
井斜、方位测量
8 (C) 2011, Baker Hughes Incorporated
近钻头自然伽马
近钻头井斜
导向单元
不同点4：Baker Hughes技术
• 导向系统的衬套转速更慢 • 与休斯钻头一体化使用 • 进尺显著提高 • 井眼更平滑，轨迹更精确
9 © 2012 Baker Hughes Incorporated. All Rights Reserved. 34882
数据: 工具时间和进尺
时间
马达导向系统 马达+常规旋转导向系统 AutoTrak Curve 系统
竖直段 造斜段 水平段
不同点1：稳定性
6 © 2012 Baker Hughes Incorporated. All Rights Reserved. 34882
100 位工程师
在BE工TA作实在验区… Celle, Germany
22个月内 总进尺300万英尺 该数字还在增加…
பைடு நூலகம்
/autotrakcurve
AutoTrak Curve…Smooth, Fast Runs
© 2012 BAKER HUGHES INCORPORATED. ALL RIGHTS RESERVED. TERMS AND CONDITIONS OF USE: BY ACCEPTING THIS DOCUMENT, THE RECIPIENT AGREES THAT THE DOCUMENT TOGETHER WITH ALL INFORMATION INCLUDED THEREIN IS THE CONFIDENTIAL AND PROPRIETARY PROPERTY OF BAKER HUGHES INCORPORATED AND INCLUDES VALUABLE TRADE SECRETS AND/OR PROPRIETARY INFORMATION OF BAKER HUGHES (COLLECTIVELY "INFORMATION"). BAKER HUGHES RETAINS ALL RIGHTS UNDER COPYRIGHT LAWS AND TRADE SECRET LAWS OF THE UNITED STATES OF AMERICA AND OTHER COUNTRIES. THE RECIPIENT FURTHER AGREES THAT THE DOCUMENT MAY NOT BE DISTRIBUTED, TRANSMITTED, COPIED OR REPRODUCED IN WHOLE OR IN PART BY ANY MEANS, ELECTRONIC, MECHANICAL, OR OTHERWISE, WITHOUT THE EXPRESS PRIOR WRITTEN CONSENT OF BAKER HUGHES, AND MAY NOT BE USED DIRECTLY OR INDIRECTLY IN ANY WAY DETRIMENTAL TO BAKER HUGHES’ INTEREST.
339 循和环小时 Houston, Texas USA
2共08计钻生进产时了间 100件原型工具和现场测
2试6 工趟具钻
积累了 1进0尺,00101,循56环4 英小尺时
不同点2：设计
• 一体化设计 • 导向化控制 • 可选择电池 • 更少的组件 • 更可靠的稳定性 • 工具本体更加结实
7 © 2012 Baker Hughes Incorporated. All Rights Reserved. 34882
AutoTrak Curve™ 旋转导向系统
致力于非常规能源钻井，让每趟钻更平滑、更省时
© 2012 BAKER HUGHES INCORPORATED. ALL RIGHTS RESERVED. TERMS AND CONDITIONS OF USE: BY ACCEPTING THIS DOCUMENT, THE RECIPIENT AGREES THAT THE DOCUMENT TOGETHER WITH ALL INFORMATION INCLUDED THEREIN IS THE CONFIDENTIAL AND PROPRIETARY PROPERTY OF BAKER HUGHES INCORPORATED AND INCLUDES VALUABLE TRADE SECRETS AND/OR PROPRIETARY INFORMATION OF BAKER HUGHES (COLLECTIVELY "INFORMATION"). BAKER HUGHES RETAINS ALL RIGHTS UNDER COPYRIGHT LAWS AND TRADE SECRET LAWS OF THE UNITED STATES OF AMERICA AND OTHER COUNTRIES. THE RECIPIENT FURTHER AGREES THAT THE DOCUMENT MAY NOT BE DISTRIBUTED, TRANSMITTED, COPIED OR REPRODUCED IN WHOLE OR IN PART BY ANY MEANS, ELECTRONIC, MECHANICAL, OR OTHERWISE, WITHOUT THE EXPRESS PRIOR WRITTEN CONSENT OF BAKER HUGHES, AND MAY NOT BE USED DIRECTLY OR INDIRECTLY IN ANY WAY DETRIMENTAL TO BAKER HUGHES’ INTEREST.
• 减少工程时间 • 更快的在储层着陆 • 井眼轨迹更平滑 • 精确命中靶点 • 更快的深完部井造和斜投产钻遇更长的产层 • 显著改善采收率 • 每年的钻井数目更多
减少了下套管、完井时间
减少工程时间: AutoTrak Curve对比常规马达钻具和 旋转导向系统
深度
5 © 2012 Baker Hughes Incorporated. All Rights Reserved. 34882
2 © 2013 Baker Hughes Incorporated. All Rights Reserved.
故障少、运行更可靠
AutoTrak 弧线旋转导向钻井系统
• 高造斜率, 整体集成钻井系统 • 钻井性能超越传统螺杆系统
− 无需切换模式 − 节约时间 • 机械械钻速提高3倍 • 至今已超过186井次, 创下许多记录 • 300,000 米进尺 • 被世界石油杂志选为2011年最佳钻井技术