离网逆变器英文说明书(新)

USER’S MANUAL

INVERTER

Pure sine-wave series Copyright2009-2010

Please strictly comply with the warnings and operation guides explained in this manual. And keep the book properly. Don’t operate this machine befor e reading all the safety instructions and operation guides. Otherwise, it will damage the devices or even cause safety accidents！

Note:

A. When press the “on” button, at the same time must be

see the green light and hear the sound of relayer, keep press “on” button about 30sec, until buzzer sound, stop to press “on” button, the inverter will be turn on.

B. If didn’t follow 1 steps lead ing to not boot properly,

please disconnect the battery cable, and then start button for about 10 seconds or continuous press several times, and then reconnect the battery cable, at last follow 1 step to operation.

Table of Contents

1.Secure Operation Precautions (2)

2.Performance Specifications (2)

e Ranges (3)

4.Installation Guides (3)

5.Indication and Status of Panel (3)

6.Technical Specifications………………………………...4 Product name…………………………………………Agent or dealer(stamp) Style NO.…………………………………………………Checker………………………………………TEL…………………………………………………………………Linkman………………………………………Series NO.………………………………………………ADD.………………………………………………………………TEL…………………………………………………Purchased date……………………………………Fax…………………………………………………

6. Technical Specifications

1.Secure Operation Precautions

We have fully considered personal and state safety factors when designing the product. But improper operation may cause safety accident, so please comply the followings when using or installing for your safety and benefits:

(1) When installing the inverter, professional operators are needed or connect

with the dealer.

(2) Assure the electric power supply meets the standard.

The battery DC voltage is the correct : the DC voltage input range is ±15% , the battery and the inverter input connector plus-minus polarity must be correctly.

Special notice: this product uses single-phase 220V voltage. Please check whether the output connector is connected well. Please confirm the load power don’t be over the inverter power.

(3) Don’t douse any liquid into the inverter or use wet cloth to wipe the cabinet.

Never touch the AC output or input connector with wet hands.

(4) Never make bold to replace the accumulator connection wire of the inverter,

if needed, please contact the service department to confirm it.

(5) Please don’t use the inverter in sloppy, dusty, high temperature or

temperature varies too sharply environment. Suggested environment temperature is 0℃~45℃. Please don’t jam the louver beside the machine or use the machine beside heat sources such as electric heater and radiator. Please avoid sunshine,dust and the dewing situation.

(6) Don’t let self-determination deficient people (such as a child) use the

product.

(7) Make sure connect ground wire when connecting the machine with indoor

electric supply net, and the size of the input wires should meet the demand of indoor loads, or it will heat deal if the size of the wire is too small and may cause fire accident. Suggested the machine should be operated by professional technicians.