手扶播种机说明书

SLBZ-I type hand operated miniature seeder Instructions

Mainly usage:sowing many kinds of vegetable,medicinal material,pasture,flowers Seeds adjustable scope:50CM long fields,seeds can adjustable within 15-100grain.

Note:

1,Nut 2 and 4,Flat gasket

3,Disc 5,Bearing box

6,Bearing 7,Body

8 and 10,Handle 9,Bolt

11,Shaft 12,Seedroller

13,Compressed 14,Cutoff block

15,Ratchet wheel 16,Check back cushion 17,Adjust umbrella 18,Check back frame 19,Spring 20,Close the ditch

21,Turns the soil regulate 22,Tension spring

23,Feedcup

Structure:

Seeding tidy,sowing precision,No cavitation and diluted phenomenon, please be at ease use.before the use,pls read the instruction carefully,please operate according to the instruction, so as to give full play to the efficiency of the machine.

After buying machine:

Prepare a root 34 mm in diameter, 1.4 meters long of wood pole, insert the handle in the pants.

Operation method:

Hold the handle front by left hand, right hand hold the handle above the average part, left hand slightly upwards, the right hand slightly down, the head forward or backward and forward sideways took the sow, also can pour planting.

Users height are relevant with planting depth.Don't need to bent down,straight waist operation is ok.

Sowing method:

The open ditch tackle the pointed ahead, with his left hand and left unscrew the positioning umbrella mother 1-2 laps, and then hold ratchet wheel, and the right hand make disk clockwise, pat kind of slot of clap kind of mouth relaxed, pat kind of increased, as the disc round clockwise, the trough of the mouth to become narrower。

Adjust depth and operation method

When the cup V ertical to the ground, hands handle position is appropriate, then test broadcasts, but according to requirements, loosen the open ditch shovel adjusting screw 3, the open ditch shovel tips go down or upgrade aside, determine after planting depth, tighten the screws, planting time to make the kind of cup perpendicular to the ground. Note:

1,If former Angle is too big, seed will automatically flow can control, does not cover up. 2,The elevation is too large warehouse after caused seed in accumulation too much, seeds can't normally expelled or seeded too shallow.

3，and banned seeded with barbed pointed and liquidity bad seeds

4, after using the machine don't lie in the water cleaning, because the warehouse has the

rest of the seeds will become mildewed, again lead to can not discharge