展望兴ZT-032真空贴合机说明书英语翻译

Pressure Gauge
Precise pressure regulating valve Start
2.Adjust each parameter correctly, including vacuum gauge, temperature controller, precise pressure regulating valve, operation interface etc.. 3.Put the counter pointed screen on the machine under mold tray. Put silicone pad on the tray. 4.Press the two green buttons at the same time to start. The machine will automatically return to original situation after laminating. 5. Take out the screen. It is done.
4.Break vacuum to open cylinder: Input air to vacuum cylinder to open it. 5.Press mold goes down: Inside press board goes down.
6.Open vacuum: Vacuum pump works. Extract air in the vacuum cylinder until it is vacuum situation. 7.Reset: Let the machine recover by touching reset button. 8.Down pressing time: Usually set 150-200ms (namely 15-20s).
•
The products specifications and technology parameters in this brochure are only for reference. There won’t be notice for any updates. This brochure is only for using guidance. All statements and information in this brochure are not guaranteed. Final explanation right belongs to our company.
Notes
1.It is advised that try several time to make sure the machine functions well before starting working in order to reduce unnecessary loss. 2.Set the operation interface parameters to reasonable value, usually subject to the values set in factory. Please do not random set these parameters and call our after sales engineer if any problem occurs. 3.Let operation interface be automatic situation when it is working normally. 4.Connect all power and connectors according to the regulations. Refer to 7 page for detailed instruction.
Vacuum Laminating Machine Back Components Diagram
Air pressure regulating valve
Vacuum cylinder regulating valve (up, down) Up and down press mold regulating valve
Product Main Features
• • • • • • • • • • Model: Weight： Wattage: Volume: Voltage: Laminating speed: Suitable screen size: Materials: Operation system: Operation interface: ZT-032 40KG (without vacuum pump) 1000w (with vacuum pump) 53*45*40cm 220v/110v can be customized below 10.5cun Aluminum PLC+ autonomous operation system 4.3cun
9.Opening vacuum time: set 25ms (namely 2.5s).
10. Parameters setting: Inside parameters have been set in the factory, and they usually do not need to be adjusted.
Eye protection organic glass
Reset
Vacuum Laminating Machine Installation Diagram
Vacuum Laminating Machine
Air pipe which connects air compressor
Connect 220v/110v power
1.Manual operation: Exchange between “manual” model and “automatic” model by touch. 2.Air cylinder proceeding: Under tray goes forward and backward by touch. 3.Vaccum cylinder goes down: cylinder goes down (or up) by touch.
Air pipe connector, connect air compressor air pipe connector, connect vacuum pump Machine Brand
Power triangle plug, connect 220v/110v power Triangle plug, connect vacuum pump
SHEN ZHEN ZHAN WANG XING TECHNOLOGY CO., LTD.
Automatic Vacuum Laminating Machine Using Instruction
Product Model: ZT-032
Foreword
• • • Dear Customers: Hello! Thanks for purchasing our automatic vacuum laminating machine. Our company is a screen maintenance equipment professional supplier who forms an integration of research and development, production, sale, after sales service. Our main products are as follows: Vacuum Laminating Machine, LCD Separator Machine, Autoclave, OCA Film Laminating Machine, Pulse Hot Press Machine etc. equipment for screen maintenance and IC Polisher maintenance equipment. Please carefully read the product instruction before you use this machine. Please abide by safety notes. Set technology parameter and operate this machine strictly according to the specification. Please contact us for any question, we will do our best to solve these questions for you! Please properly take care of every item instruction and relative technology documents for reference any time!
Air compressor
Vacuum pipe which connects vacuum pump Vacuum pump Power patch board
Operation Interface Instruction
Note: Please use triangle socket and ly connect ground wire for your safety and machine safety
Contents
• • • • • • • • • • • Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Part 7 Part 8 Part 9 Part 10 Part 11 Foreword------------------------------------------------------------------------1 Contents-------------------------------------------------------------------------2 Vacuum Laminating Machine Back Components Diagram----------3 Product Main Features-------------------------------------------------------4 Laminating Machine Operation Procedure------------------------------5 Vacuum Laminating Machine Installation Diagram-------------------6 Operation Interface Instruction--------------------------------------------7 Notes-----------------------------------------------------------------------------8 Fault and solutions------------------------------------------------------------9 Attached Random Accessories List---------------------------------------10 After Sales Service-------------------------------------------------------------11
Laminating Machine Operation Procedure
ZT-032 Automatic Vacuum Laminating Machine Diagram
Vacuum Gauge Temperature controller
Operation interface
1.Power on, reset the machine to original situation.