MC100H600中文资料

合集下载

MC100H600FNG资料

MC10H600, MC100H6009−Bit TTL to E CL Translator DescriptionThe MC10H/100H600 is a 9−bit, dual supply TTL to ECL translator. Devices in the ON Semiconductor 9−bit translator series utilize the PLCC−28 for optimal power pinning, signal flow−through and electrical performance.The H600 features both ECL and TTL logic enable controls for maximum flexibility.The 10H version is compatible with MECL 10H ECL logic levels. The 100H version is compatible with 100K levels.Features•9−Bit Ideal for Byte−Parity Applications•Flow−Through Configuration•Extra TTL and ECL Power/Ground Pins to Minimize Switching Noise•ECL and TTL Enable Inputs•Dual Supply•3.5 ns Max D to Q•PNP TTL Inputs for Low Loading•Choice of ECL Compatibility:MECL 10H (10Hxxx) or 100K (100Hxxx)•Pb−Free Packages are Available**For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.MARKING DIAGRAM*xxx= 10 or 100A= Assembly LocationWL= Wafer LotYY= YearWW= Work WeekG=Pb−Free PackagePLCC−28FN SUFFIXCASE 776MCxxxH600GAWLYYWW1*For additional marking information, refer toApplication Note AND8002/D.See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.ORDERING INFORMATIONFigure 1. Pinout: PLCC −28 (Top View)D6D7D8GND ENTTLNC ENECLD5D4V CCT D3D2D1D0Figure 2. Logic SymbolQ0Q1Q2Q3Q4Q5Q6Q7Q8ECLENECL H H X X LENTTL X X H H LD H L H L XQ H L H L LTable 2. TRUTH TABLETable 3. DC CHARACTERISTICS: V CCT = 5.0 V ± 10%; V EE = −5.2 V ± 5% (10H version); V EE = −4.2 V to −5.5 V (100H)SymbolParameter0°C25°C75°CUnitMinMaxMinMaxMinMaxPower Supply Current I EE ECL 10H 100H−125−122−125−123−125−132mA I CCH I CCLTTL485048504850mANOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuitboard with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.Table 4. 10H ECL DC CHARACTERISTICS: V CCT = 5.0 V ± 10%; V EE = −5.2 V ± 5%Symbol Parameter Condition0°C25°C75°CUnit Min Max Min Max Min MaxI INH I IL Input HIGH CurrentInput LOW Current0.52250.51750.5175m Am AV IH V IL Input HIGH VoltageInput LOW Voltage−1170−1950−840−1480−1130−1950−810−1480−1070−1950−735−1450mVV OH V OL Output HIGH VoltageOutput LOW Voltage50 W to −2.0 V−1020−1950−840−1630−980−1950−810−1630−920−1950−735−1600mVNOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.Table 5. 100H ECL DC CHARACTERISTICS: V CCT = 5.0 V ± 10%; V EE = −4.2 V to −5.5 VSymbol Parameter Condition0°C25°C75°CUnit Min Max Min Max Min MaxI INH I IL Input HIGH CurrentInput LOW Current0.52550.51750.5175m Am AV IH V IL Input HIGH VoltageInput LOW Voltage−1165−1810−880−1475−1165−1810−880−1475−1165−1810−880−1475mVV OH V OL Output HIGH VoltageOutput LOW Voltage50 W to −2.0 V−1025−1810−880−1620−1025−1810−880−1620−1025−1810−880−1620mVNOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.Table 6. TTL DC CHARACTERISTICS: V CCT = 5.0 V ± 10%; V EE = −5.2 V ± 5% (10H); V EE = −4.2 V to −5.5 V (100H)Symbol Parameter Condition0°C25°C75°CUnit Min Max Min Max Min MaxV IH V IL Input HIGH VoltageInput LOW Voltage2.00.82.00.82.00.8VVI IH Input HIGH Current V IN = 2.7 VV IN = 7.0 V 201002010020100m AI IL Input LOW Current V IN = 0.5 V−0.6−0.6−0.6mAV IK Input Clamp Voltage I IN = −18 mA−1.2−1.2−1.2V NOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.Table 7. AC CHARACTERISTICS: V CCT = 5.0 V ± 10%; V EE = −5.2 V ± 5% (10H); V EE =−4.2 V to −5.5 V (100H)Symbol Parameter Condition0°C25°C75°CUnit Min Max Min Max Min Maxt PLH t PHL Propagation Delay to Output D50 W to −2.0 V 1.4 3.0 1.5 3.2 1.7 3.5nsENECL/ENTTL1.8 3.7 1.9 3.92.0 4.1nst R t F Output Rise/Fall Time20%−80%0.5 1.50.5 1.50.5 1.5nsNOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.ORDERING INFORMATIONDevice Package Shipping†MC10H600FN PLCC−2837 Units / RailMC10H600FNG PLCC−28(Pb−Free)37 Units / RailMC10H600FNR2PLCC−28500 / Tape & ReelMC10H600FNR2G PLCC−28(Pb−Free)500 / Tape & ReelMC100H600FN PLCC−2837 Units / RailMC100H600FNG PLCC−28(Pb−Free)37 Units / RailMC100H600FNR2PLCC−28500 / Tape & ReelMC100H600FNR2G PLCC−28(Pb−Free)500 / Tape & Reel†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.Resource Reference of Application NotesAN1405/D−ECL Clock Distribution TechniquesAN1406/D−Designing with PECL (ECL at +5.0 V)AN1503/D−ECLinPS t I/O SPiCE Modeling KitAN1504/D−Metastability and the ECLinPS FamilyAN1568/D−Interfacing Between LVDS and ECLAN1672/D−The ECL Translator GuideAND8001/D−Odd Number Counters DesignAND8002/D−Marking and Date CodesAND8020/D−Termination of ECL Logic DevicesAND8066/D−Interfacing with ECLinPSAND8090/D−AC Characteristics of ECL DevicesPACKAGE DIMENSIONSPLCC −28FN SUFFIXPLASTIC PLCC PACKAGECASE 776−02ISSUE ESL−M S 0.010 (0.250) NST VIEW SNOTES:1.DATUMS −L−, −M−, AND −N− DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE.2.DIMENSION G1, TRUE POSITION TO BEMEASURED AT DATUM −T−, SEATING PLANE.3.DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE.4.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.5.CONTROLLING DIMENSION: INCH.6.THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012(0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY.7.DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037(0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635).DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.4850.49512.3212.57B 0.4850.49512.3212.57C 0.1650.180 4.20 4.57E 0.0900.110 2.29 2.79F 0.0130.0190.330.48G 0.050 BSC 1.27 BSC H 0.0260.0320.660.81J 0.020−−−0.51−−−K 0.025−−−0.64−−−R 0.4500.45611.4311.58U 0.4500.45611.4311.58V 0.0420.048 1.07 1.21W 0.0420.048 1.07 1.21X 0.0420.056 1.07 1.42Y −−−0.020−−−0.50Z 2 10 2 10 G10.4100.43010.4210.92K10.040−−− 1.02−−−____ECLinPS is a trademark of Semiconductor Components Industries, LLC (SCILLC).ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATION。

MC100EP101FAR2G,MC10EP101FAR2G,MC100EP101MNR4G,MC10EP101MNR4G,MC10EP101MNG, 规格书,Datasheet 资料

MC10EP101, MC100EP101 3.3V / 5V ECL Quad 4−Input OR/NORDescriptionThe MC10/100EP101 is a Quad 4−input OR/NOR gate. The device is functionally equivalent to the E101. With AC performance faster than the E101 device, the EP101 is ideal for applications requiring the fastest AC performance available.The 100 Series contains temperature compensation.Features•250 ps Typical Propagation Delay•Maximum Frequency > 3 GHz Typical•PECL Mode Operating Range: V CC = 3.0 V to 5.5 Vwith V EE = 0 V•NECL Mode Operating Range: V CC = 0 Vwith V EE = −3.0 V to −5.5 V•Open Input Default State•Pb−Free Packages are Available**For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet.ORDERING INFORMATIONNCV EE D3d D3c V CC D3b D3a D2d V CCV CC Q0Q0V EE D0a D0b D0c Figure 1. 32−Lead LQFP Pinout (Top View)Warning: All V CC and V EE pins must be externally connected to Power Supply to guarantee proper operation.Q 0Q 0Q 1Q 1Q 2Q 2Q 3Q 3NC 2526272829303132151413121110912345678242322212019181716V EE D3d D3c V CC D3b D3a D2dV CC V CC Q0Q0V EE D0a D0b D0c V CCQ2V CC D2cD2b D2a D1d D1c D1bD0d D1a Q1Q2Q3Q3Q1MC10EP101MC100EP101Figure 2. 32−Lead QFN Pinout (Top View)Table 3. ATTRIBUTESCharacteristics Value Internal Input Pulldown Resistor75 k W Internal Input Pullup Resistor N/AESD Protection Human Body ModelMachine ModelCharged Device Model > 4 kV > 100 V > 2 kVMoisture Sensitivity, Indefinite Time Out of Drypack (Note 1)Pb Pkg Pb−Free PkgLQFP−32 QFN−32Level 2Level 2Level 1Flammability Rating Oxygen Index: 28 to 34UL−94 V−0 @ 0.125 inTransistor Count173 DevicesMeets or exceeds JEDEC Spec EIA/JESD78 IC Latchup Test1.For additional information, see Application Note AND8003/D.Table 4. MAXIMUM RATINGSSymbol Parameter Condition 1Condition 2Rating Unit V CC PECL Mode Power Supply V EE = 0 V6V V EE NECL Mode Power Supply V CC = 0 V−6VV I PECL Mode Input VoltageNECL Mode Input Voltage V EE = 0 VV CC = 0 VV I≤ V CCV I≤ V EE6−6VVI out Output Current ContinuousSurge 50100mAmAI BB V BB Sink/Source± 0.5mA T A Operating Temperature Range−40 to +85°C T stg Storage Temperature Range−65 to +150°Cq JA Thermal Resistance (Junction−to−Ambient)0 lfpm500 lfpm 32 LQFP32 LQFP8055°C/W°C/Wq JC Thermal Resistance (Junction−to−Case)Standard32 LQFP12 to 17°C/Wq JA Thermal Resistance (Junction−to−Ambient)0 lfpm500 lfpm QFN−32QFN−323127°C/W°C/Wq JC Thermal Resistance (Junction−to−Case)2S2P QFN−3212°C/WT sol Wave Solder PbPb−Free 265265°CRecommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit I EE Power Supply Current455775455875455975mA V OH Output HIGH Voltage (Note 3)216522902415223023552480229024152540mV V OL Output LOW Voltage (Note 3)136514901615143015551680149016151740mV V IH Input HIGH Voltage (Single−Ended)209024152155248022152540mV V IL Input LOW Voltage (Single−Ended)136516901460175514901815mV I IH Input HIGH Current150150150m AI IL Input LOW Current−150−150−150m A NOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.2.Input and output parameters vary 1:1 with V CC. V EE can vary +0.3 V to −2.2 V.3.All loading with 50 W to V CC− 2.0 V.Table 6. 10EP DC CHARACTERISTICS, PECL V CC= 5.0 V, V EE = 0 V (Note 4)−40°C25°C85°CSymbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit I EE Power Supply Current455775455875455975mA V OH Output HIGH Voltage (Note 5)386539904115393040554180399041154240mV V OL Output LOW Voltage (Note 5)306531903315313032553380319033153440mV V IH Input HIGH Voltage (Single−Ended)379041153855418039154240mV V IL Input LOW Voltage (Single−Ended)306533903130345531903515mV I IH Input HIGH Current150150150m AI IL Input LOW Current−150−150−150m A NOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.4.Input and output parameters vary 1:1 with V CC. V EE can vary +2.0 V to −0.5 V.5.All loading with 50 W to V CC− 2.0 V.Table 7. 10EP DC CHARACTERISTICS, NECL V CC = 0 V, V EE= −5.5 V to −3.0 V (Note 6)−40°C25°C85°CSymbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit I EE Power Supply Current455775455875455975mA V OH Output HIGH Voltage (Note 7)−1135−1010−885−1070−945−820−1010−885−760mV V OL Output LOW Voltage (Note 7)−1935−1810−1685−1870−1745−1620−1810−1685−1560mV V IH Input HIGH Voltage (Single−Ended)−1210−885−1145−820−1085−760mV V IL Input LOW Voltage (Single−Ended)−1935−1610−1870−1545−1810−1485mV I IH Input HIGH Current150150150m AI IL Input LOW Current−150−150−150m A NOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.6.Input and output parameters vary 1:1 with V.Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit I EE Power Supply Current405575405875456085mA V OH Output HIGH Voltage (Note 9)215522802405215522802405215522802405mV V OL Output LOW Voltage (Note 9)135514801605135514801605135514801605mV V IH Input HIGH Voltage (Single−Ended)207524202075242020752420mV V IL Input LOW Voltage (Single−Ended)135516751355167513551675mV I IH Input HIGH Current150150150m AI IL Input LOW Current−150−150−150m A NOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.8.Input and output parameters vary 1:1 with V CC. V EE can vary +0.3 V to −2.2 V.9.All loading with 50 W to V CC− 2.0 V.Table 9. 100EP DC CHARACTERISTICS, PECL V CC= 5.0 V, V EE = 0 V (Note 10)−40°C25°C85°CSymbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit I EE Power Supply Current405875406175456485mA V OH Output HIGH Voltage (Note 11)385539804105385539804105385539804105mV V OL Output LOW Voltage (Note11)305531803305305531803305305531803305mV V IH Input HIGH Voltage (Single−Ended)377541203775412037754120mV V IL Input LOW Voltage (Single−Ended)305533753055337530553375mV I IH Input HIGH Current150150150m AI IL Input LOW Current−150−150−150m A NOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.10.Input and output parameters vary 1:1 with V CC. V EE can vary +2.0 V to −0.5 V.11.All loading with 50 W to V CC− 2.0 V.Table 10. 100EP DC CHARACTERISTICS, NECL V CC = 0 V, V EE= −5.5 V to −3.0 V (Note 12)−40°C25°C85°CSymbol Characteristic Min Typ Max Min Typ Max Min Typ Max UnitI EE Power Supply Current V CC = −3.3VV CC = −5.0 V 404055587575404058617575454560648585mAI EE Power Supply Current506380556785607088mA V OH Output HIGH Voltage (Note 13)−1145−1020−895−1145−1020−895−1145−1020−895mV V OL Output LOW Voltage (Note 13)−1945−1820−1695−1945−1820−1695−1945−1820−1695mV V IH Input HIGH Voltage (Single−Ended)−1225−880−1225−880−1225−880mV V IL Input LOW Voltage (Single−Ended)−1945−1625−1945−1625−1945−1625mV I IH Input HIGH Current150150150m AI IL Input LOW Current−150−150−150m A NOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.12.Input and output parameters vary 1:1 with V.Table 11. AC CHARACTERISTICS V CC = 0 V; V EE = −3.0 V to −5.5 V or V CC = 3.0 V to 5.5 V; V EE = 0 V (Note 14)−40°C25°C 85°C Symbol CharacteristicMinTyp MaxMinTyp MaxMinTyp MaxUnit f max Maximum Frequency(See Figure 4. F max /JITTER)> 3> 3> 3GHz t PLH ,t PHL Propagation DelayD to Q, Q10100125180225280325380150200250300370400170250300320420450pst SKEW Within Device SkewQ, Q Device to Device Skew (Note 15)155020020502002050200ps t JITTER Cycle −to −Cycle Jitter(See Figure 4. F max /JITTER)0.2< 10.2< 10.2< 1ps t r t fOutput Rise/Fall Times Q, Q(20% − 80%)100150200120170220150190250psNOTE:Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuitboard with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declaredoperating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit values are applied individually under normal operating conditions and not valid simultaneously.14.Measured using a 750 mV source, 50% duty cycle clock source. All loading with 50 W to V CC − 2.0 V.15.Skew is measured between outputs under identical transitions.1002003004005006007008009001000010002000300040005000Figure 4. F max /JitterFREQUENCY (MHz)V O U T p p (m V )Figure 5. Typical Termination for Output Driver and Device Evaluation V TTV TT = V CC − 2.0 VORDERING INFORMATIONDevice Package Shipping†MC10EP101FA LQFP−32250 Units / Tray MC10EP101FAG LQFP−32(Pb−Free)250 Units / Tray MC10EP101FAR2LQFP−322000 / Tape & ReelMC10EP101FAR2G LQFP−32(Pb−Free)2000 / Tape & Reel MC100EP101FA LQFP−32250 Units / TrayMC100EP101FAG LQFP−32(Pb−Free)250 Units / Tray MC100EP101FAR2LQFP−322000 / Tape & ReelMC100EP101FAR2G LQFP−32(Pb−Free)2000 / Tape & ReelMC10EP101MNGQFN−32(Pb−Free)74 Units / RailMC10EP101MNR4G1000 / Tape & ReelMC100EP101MNG74 Units / RailMC100EP101MNR4G1000 / Tape & Reel†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.Resource Reference of Application NotesAN1405/D−ECL Clock Distribution TechniquesAN1406/D−Designing with PECL (ECL at +5.0 V)AN1503/D−ECLinPS t I/O SPiCE Modeling KitAN1504/D−Metastability and the ECLinPS FamilyAN1568/D−Interfacing Between LVDS and ECLAN1672/D−The ECL Translator GuideAND8001/D−Odd Number Counters DesignAND8002/D−Marking and Date CodesAND8020/D−Termination of ECL Logic DevicesAND8066/D−Interfacing with ECLinPSAND8090/D−AC Characteristics of ECL DevicesAET −U M0.20 (0.008)ZA C NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION:MILLIMETER.3.DATUM PLANE −AB − IS LOCATED AT BOTTOM OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE BOTTOM OF THE PARTING LINE.4.DATUMS −T −, −U −, AND −Z − TO BE DETERMINED AT DATUM PLANE −AB −.5.DIMENSIONS S AND V TO BEDETERMINED AT SEATING PLANE −AC −.6.DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLEPROTRUSION IS 0.250 (0.010) PER SIDE.DIMENSIONS A AND B DO INCLUDE MOLD MISMATCH AND AREDETERMINED AT DATUM PLANE −AB −.7.DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. DAMBARPROTRUSION SHALL NOT CAUSE THE D DIMENSION TO EXCEED 0.520 (0.020).8.MINIMUM SOLDER PLATE THICKNESS SHALL BE 0.0076 (0.0003).9.EXACT SHAPE OF EACH CORNER MAY VARY FROM DEPICTION.DIM A MIN MAX MIN MAX INCHES 7.000 BSC 0.276 BSC MILLIMETERS B 7.000 BSC 0.276 BSC C 1.400 1.6000.0550.063D 0.3000.4500.0120.018E 1.350 1.4500.0530.057F 0.3000.4000.0120.016G 0.800 BSC 0.031 BSC H 0.0500.1500.0020.006J 0.0900.2000.0040.008K 0.4500.7500.0180.030M 12 REF 12 REF N 0.0900.1600.0040.006P 0.400 BSC 0.016 BSC Q 1 5 1 5 R 0.1500.2500.0060.010V 9.000 BSC 0.354 BSC V1 4.500 BSC 0.177 BSC ______B1 3.500 BSC 0.138 BSC A1 3.500 BSC 0.138 BSC S 9.000 BSC 0.354 BSC S1 4.500 BSC 0.177 BSC W 0.200 REF 0.008 REF X1.000 REF 0.039 REF32 LEAD LQFP CASE 873A −02QFN32 5*5*1 0.5 P CASE 488AM −01ISSUE O2 X*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.PUBLICATION ORDERING INFORMATIONECLinPS is a trademark of Semiconductor Components INdustries, LLC (SCILLC).。

NUC100中文手册

5.4 通用I/O (GPIO).............................................................................................................. 46
5.4.1 概述.................................................................................................................................46
3.3.2 NuMicro™ NUC100 Low Density引脚定义 ......................................................................24
4
框图 ........................................................................................................................................... 30
5.2 系统管理器 .................................................................................................................... 34
5.2.1 概述.................................................................................................................................34 5.2.2 系统复位..........................................................................................................................34 5.2.3 系统电源分配 ..................................................................................................................35 5.2.4 系统内存映射 ..................................................................................................................37 5.2.5 系统定时器(SysTick) .......................................................................................................39 5.2.6 嵌套向量中断控制器(NVIC).............................................................................................40

MC100EL1648DR2G;MC100EL1648DTR2G;MC100EL1648MNR4G;MC100EL1648DTG;中文规格书,Datasheet资料

MC100EL1648
5 V ECL Voltage Controlled Oscillator Amplifier
Description The MC100EL1648 is a voltage controlled oscillator amplifier that
requires an external parallel tank circuit consisting of the inductor (L) and capacitor (C). A varactor diode may be incorporated into the tank circuit to provide a voltage variable input for the oscillator (VCO). This device may also be used in many other applications requiring a fixed frequency clock.
1. For additional Moisture Sensitivity information, refer to Application Note AND8003/D.
/
2
MC100EL1648
Table 3. MAXIMUM RATINGS
Exposed
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Pad
14 Lead 12
1, 14 3 5
7, 8 10 2, 4, 7, 9, 11, 13
Symbol TANK VCC OUT AGC VEE BIAS NC EP

MC100ES6039EG中文资料

MC100ES6039Rev 2, 06/2005Freescale Semiconductor Technical Data© Freescale Semiconductor, Inc., 2005. All rights reserved.3.3 V ECL/PECL/HSTL/LVDS ÷2/4,÷4/6 Clock Generation ChipThe MC100ES6039 is a low skew ÷2/4, ÷4/6 clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edges are all precisely aligned. The device can be driven by either a differential or single-ended ECL or, if positive power supplies are used, LVPECL input signals. In addition, by using the V BB output, a sinusoidal source can be AC coupled into the device.The common enable (EN) is synchronous so that the internal dividers will only be enabled/disabled when the internal clock is already in the LOW state. This avoids any chance of generating a runt clock pulse on the internal clock when the device is enabled/disabled as can happen with an asynchronous control. The internal enable flip-flop is clocked on the falling edge of the input clock, therefore, all associated specification limits are referenced to the negative edge of the clock input.Upon startup, the internal flip-flops will attain a random state; therefore, for systems which utilize multiple ES6039s, the master reset (MR) input must be asserted to ensure synchronization. For systems which only use one ES6039, the MR pin need not be exercised as the internal divider design ensuressynchronization between the ÷2/4 and the ÷4/6 outputs of a single device. All V CC and V EE pins must be externally connected to power supply to guarantee proper operation.The 100ES Series contains temperature compensation.Features •Maximum Frequency >1.0 GHz Typical •50 ps Output-to-Output Skew•PECL Mode Operating Range: V CC = 3.135 V to 3.8 V with V EE = 0 V •ECL Mode Operating Range: V CC = 0 V with V EE = –3.135 V to –3.8 V •Open Input Default State •Synchronous Enable/Disable•Master Reset for Synchronization of Multiple Chips •V BB Output•LVDS and HSTL Input Compatible •20-Lead Pb-Free Package AvailableMC100ES6039ORDERING INFORMATIONDevicePackage MC100ES6039DW SO-20MC100ES6039DWR2SO-20MC100ES6039EG SO-20 (Pb-Free)MC100ES6039EGR2SO-20 (Pb-Free)Advanced Clock Drivers Device DataMC100ES6039Figure 1. 20-Lead Pinout (Top View)CLKCLKMRV CC171816151413124356789Q01110Q1Q1Q2Q2Q3Q3V EE EN192021V CC Q0V BBV CCD I V SE L bNCD I V SE L aWarning: All V CC and V EE pins must be externally connected to Power Supply to guarantee proper operation.Table 1. Pin DescriptionPinFunctionCLK (1), CLK (1)1.Pins will default low when left open.ECL Diff Clock Inputs EN (1)ECL Sync Enable MR (1)ECL Master Reset V BBECL Reference Output Q0, Q1, Q0, Q1ECL Diff ÷2/4 Outputs Q2, Q3, Q2, Q3ECL Diff ÷4/6 Outputs DIVSELa (1)ECL Freq. Select Input ÷2/4DIVSELb (1)ECL Freq. Select Input ÷4/6V CC ECL Positive Supply V EE ECL Negative Supply NCNo ConnectTable 2. Function TablesCLK EN MR Function Z ZZ XL H XL L HDivide Hold Q0:3Reset Q0:3X = Don’t CareZ = Low-to-High Transition ZZ = High-to-Low TransitionDIVSELaQ0:1 Outputs L H Divide by 2Divide by 4DIVSELbQ2:3 Outputs L HDivide by 4Divide by 6Figure 2. Logic DiagramCLKCLKENMR ÷2/4Q0Q0Q1Q1÷4/6Q2Q2Q3Q3RRDIVSELaDIVSELbV EEAdvanced Clock Drivers Device Data MC100ES6039Figure 3. Timing DiagramFigure 4. Timing DiagramTable 3. AttributesCharacteristicsValue Internal Input Pulldown Resistor 75 k ΩInternal Input Pullup Resistor 75 k ΩESD ProtectionHuman Body Model Machine ModelCharged Device Model> 4 kV > 200 V > 2 kVMeets or exceeds JEDEC Spec EIA/JESD78 IC Latchup TestCLK Q (÷2)Q (÷4)Q (÷6)t RRCLKRESETQ (÷n)Advanced Clock Drivers Device DataMC100ES6039Table 4. Maximum Ratings (1)1.Maximum Ratings are those values beyond which device damage may occur.Symbol ParameterCondition 1Condition 2Rating Units V CC PECL Mode Power Supply V EE = 0 V 3.9V V EE ECL Mode Power Supply V CC = 0 V –3.9V V I PECL Mode Input Voltage ECL Mode Input Voltage V EE = 0 V V CC = 0 V V I ≤ V CC V I ≥ V EE3.9–3.9V V I out Output Current Continuous Surge50100mA mA I BB V BB Sink/Source± 0.5mA T A Operating Temperature Range –40 to +85°C T stg Storage Temperature Range–65 to +150°C θJAThermal Resistance (Junction-to-Ambient)0 LFPM 500 LFPM20 SOIC 20 SOICTBD TBD°C/W °C/WTable 5. DC Characteristics (V CC = 0 V, V EE = –3.8 V to –3.135 V or V CC = 3.135 V to 3.8 V, V EE = 0 V)(1)1.MC100ES6139 circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500 lfpm is maintained.Symbol Characteristic–40°C0°C to 85°CUnit MinTyp Max MinTyp Max I EE Power Supply Current 35603560mA V OH Output HIGH Voltage (2)2.All loading with 50 Ω to V CC –2.0 volts.V CC –1150V CC –1020V CC –800V CC –1200V CC –970V CC –750mV V OL Output LOW Voltage (2)V CC –1950V CC –1620V CC –1250V CC –2000V CC –1680V CC –1300mV V IH Input HIGH Voltage (Single-Ended)V CC –1165V CC –880V CC –1165V CC –880mV V IL Input LOW Voltage (Single-Ended)V CC –1810V CC –1475V CC –1810V CC –1475mV V BB Output Reference Voltage V CC –1400V CC –1200V CC –1400V CC –1200mV V PP Differential Input Voltage (3)3.V PP (DC) is the minimum differential input voltage swing required to maintain device functionality.0.12 1.40.12 1.4V V CMR Differential Cross Point Voltage (4)4.V CMR (DC) is the crosspoint of the differential input signal. Functional operation is obtained when the crosspoint is within the V CMR (DC) range and the input swing lies within the V PP (DC) specification.V EE +0.2V CC –0.7V EE +0.2V CC –0.7V I IH Input HIGH Current 150150µA I ILInput LOW Current0.50.5µAAdvanced Clock Drivers Device Data MC100ES6039Figure 5. Typical Termination for Output Driver and Device EvaluationTable 6. AC Characteristics (V CC = 0 V, V EE = –3.8 V to –3.135 V or V CC = 3.135 V to 3.8 V, V EE = 0 V)(1)1.Measured using a 750 mV source, 50% duty cycle clock source. All loading with 50 Ω to V CC –2.0 V.Symbol Characteristic–40°C25°C 85°C Unit MinTyp MaxMinTyp MaxMinTyp Maxf max Maximum Frequency > 1> 1> 1GHz t PLH ,t PHL Propagation Delay CLK, Q (Diff)MR, Q575500875850575500875850575500875850ps ps t RR Reset Recovery 200100200100200100ps t s Setup Time EN, CLK DIVSEL, CLK 200400120180200400120180200400120180ps ps t h Hold TimeCLK, EN CLK, DIVSEL100200501401002005014010020050140ps ps t PW Minimum Pulse WidthMR550450550450550450ps t SKEWWithin Device Skew Q, QQ, Q @ Same FrequencyDevice-to-Device Skew (2)2.Skew is measured between outputs under identical transitions. Duty cycle skew is defined only for differential operation when the delays are measured from the cross point of the inputs to the cross point of the outputs.805030080503008050300ps ps ps t JITTER Cycle-to-Cycle Jitter (RMS 1σ)111ps V PP Input Voltage Swing (Differential)150140015014001501400mV V CMR Differential Cross Point Voltage V EE +0.2V CC –1.1V EE +0.2V CC –1.1V EE +0.2V CC –1.1V t r t fOutput Rise/Fall Times Q, Q(20% – 80%)503005030050300psDriver DeviceReceiver DeviceQD50 ΩQD50 ΩV TTV TT = V CC –- 2.0 VISSUE J20-LEAD SOIC PACKAGEMC100ES6039Advanced Clock Drivers Device DataISSUE J20-LEAD SOIC PACKAGEMC100ES6039 Advanced Clock Drivers Device DataHow to Reach Us:Home Page:E-mail:support@USA/Europe or Locations Not Listed: Freescale SemiconductorTechnical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224+1-800-521-6274 or +1-480-768-2130 support@Europe, Middle East, and Africa:Freescale Halbleiter Deutschland GmbHTechnical Information CenterSchatzbogen 781829 Muenchen, Germany+44 1296 380 456 (English)+46 8 52200080 (English)+49 89 92103 559 (German)+33 1 69 35 48 48 (French)support@Japan:Freescale Semiconductor Japan Ltd.HeadquartersARCO Tower 15F1-8-1, Shimo-Meguro, Meguro-ku,Tokyo 153-0064Japan0120 191014 or +81 3 5437 9125support.japan@Asia/Pacific:Freescale Semiconductor Hong Kong Ltd.Technical Information Center2 Dai King StreetTai Po Industrial EstateTai Po, N.T., Hong Kong+800 2666 8080@For Literature Requests Only:Freescale Semiconductor Literature Distribution Center P.O. Box 5405Denver, Colorado 802171-800-441-2447 or 303-675-2140Fax: 303-675-2150 LDCForFreescaleSemiconductor@MC100ES6039Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document.Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners.© Freescale Semiconductor, Inc. 2005. All rights reserved.。

H600中文说明书

x
H600 RFHawk
ZZZ
用户手册
*P077035700*
077-0357-00
xx
H600 RFHawk
ZZZ
用户手册

077-0357-00
Copyright © Tektronix. 保留所有权利。许可软件产品由 Tektronix、其子公司或提供商所有，受国家版权法及国际条约规定的保护。
保修
Tektronix 保证本产品自发货之日起一年内，不会出现材料和工艺方面的缺陷。如果在保修期内证实任何此类产品有缺陷，Tektronix 将自主决定，是修复有缺陷的产品（但不收取部件和人工费用）还是提供替换件以换回有缺陷的产品。Tektronix 在保修工作中使用的部件、模块和替代产品可能是新的，也可能是具同等性能的翻新件。所有更换的部件、模块和产品均归 Tektronix 所有。
[W2 – 15AUG04]
目录
目录
常规安全概要 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii 符合性信息.. .. .. .. . .. .. .. .. .. . .. .. .. .. .. . .. .. .. .. . .. .. .. .. .. . .. .. .. .. . .. . v
Tektronix, Inc. 14200 SW Karl Braun Drive P.O. Box 500 Beaverton, OR 97077 USA
有关产品信息、销售、服务和技术支持：在北美地区，请拨打 1-800-833-9200。其他地区用户请访问，以查找当地的联系信息。

MC100ELT22中文资料

ICC Power Supply Current 1. Levels will vary 1:1 with VCC.
AC CHARACTERISTICS (VCC = 4.75V to 5.25V; TA = –40°C to 85°C)
–40°C Symbol tPLH tPHL tr/tf fMAX Characteristic Propagation Delay1 Propagation Delay1 Output Rise/Fall Time Maximum Input Frequency Min 0.6 0.4 0.4 100 Max 1.2 1.0 1.6 Min 0.65 0.45 0.4 100 0°C Max 1.45 1.05 1.6 Min 0.9 0.5 0.4 100 25°C Typ 1.2 0.8 Max 1.5 1.1 1.6 85°C Min 0.6 0.7 0.4 100 Max 1.35 1.30 1.6 Unit ns ns ns MHz 20–80% Condition
* Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions.
P
0.25 (0.010)
M
–T–
8X
C
SEATING PLANE
D 0.25 (0.010)
M
K
T B
S
A
S
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 MFAX: RMFAX0@ – TOUCHTONE 602–244–6609 INTERNET: http://Design–

MC100LVEL14DW中文资料

Operating Temperature Range
VEE Operating Range1,2 –5.7 to –4.2 1. Absolute maximum rating, beyond which, device life may be impaired, unless otherwise specified on an individual data sheet. 2. Parametric values specified at: 100EL Series: –4.20V to –5.50V 10EL Series: –4.94V to –5.50V
1. This table replaces the three tables traditionally seen in ECL 100K data books. The same DC parameter values at VEE = –4.5V now apply across the full VEE range of –3.0V to –5.5V. Outputs are terminated through a 50Ω resistor to –2.0V except where otherwise specified on the individual data sheets.
ABSOLUTE MAXIMUM RATINGS1
Symbol VEE VI Iout TA Power Supply (VCC = 0V) Input Voltage (VCC = 0V) Output Current Continuous Surge Characteristic Rating –8.0 to 0 0 to –6.0 50 100 –40 to +85 Unit VDC VDC mA °C V

MC100系列说明书(DOC)

MC100系列智能多媒体控制系统Intelligent Multimedia Control System（适用于MC100系列机型）用户安装手册User’s Manual* *请在安装使用前认真阅读本说明书**尊敬的用户：感谢您选购我们生产的这个系列多媒体中央控制器。

该产品具有外观设计小巧高档大方；使用简单方便；功能强大；可直接外接其他厂家的设备；二个可编程232口最多可同时控制两个不同厂家的投影机或其他设备；可对各接口重新定义和单独控制；投影机一键切换；投影幕自动升降；开机即是电脑画面等等多种实用功能。

为了您能安全地使用本设备，发挥其最大的功能，强烈建议在安装使用前先仔细阅读本说明书。

若有任何技术问题或对产品的意见和建议，请与本公司技术服务部联系。

联系方法如下：电话：（020）33534881 61087188传真：（020）61087188-8002地址：广州市天河软件园建工路9号4楼南区A1邮编：510665E-mail：laitong@http：//特别提醒：1. 在使用本系统的时候，严禁在开机时对各个部件进行插拔（特别是通讯口及VGA接口，这可能会人为损坏设备）。

2. 本控制器为智能开关设计，在雷雨天气或长时间不使用时，请关闭电源总闸。

3. 本控制器内有强电模块，严禁带电自行维修。

4．因中控本身已做好接地处理，为有效保护中控及设备，请在强电输入部分做好接地措施！目录一．系统说明1，中控简介 (5)2，简单使用说明 (5)二，硬件连接1，连线说明 (6)三，系统设置1，系统通讯协议 (8)2，开机状态设置 (10)3，开关机流程设置 (11)4，开关延时设置 (12)5，投影机设置 (12)6，红外学习 (14)7，按键面板设置 (15)8，其它设置 (16)四，常见故障处理1，按控制面板“系统开”无法开机 (18)2，红外学习不成功或显示成功却不能遥控 (18)3，有些设备红外遥控不灵 (19)4，投影机打不开 (19)5，中控与电脑连接失败 (19)一、系统说明1. 中控简介智能多媒体控制器为简单电化教室、会议室及家居提供了很好的解决方案。

MC100H601中文资料

E 0.004 (0.100) G G1 0.010 (0.250)
S
K1
J
–T– VIEW S
SEATING PLANE
K F VIEW S 0.007 (0.180)
M
T L–M
S
N
S
T L–M
S
N
S
NOTES: 1. DATUMS –L–, –M–, AND –N– DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM –T–, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635).

MC100E310FN资料

Pinout: 28–Lead PLCC (Top View)
15 14 13 12
Q7 VCCO Q7
LOQ2 CLKa CLKa CLKb CLKb CLK_SEL Q3 Q3 Q4 Q4 Q5 Q5 Q6 Q6 Q7 Q7 VBB
MOTOROLA
PIN NAMES
Q3 Pins Q4 VCCO Q4 Q5 Q5 CLK_SEL 0 1 Input Clock CLKa Selected CLKb Selected CLKa, CLKb Q0:7 VBB CLK_SEL Function Differential Input Pairs Differential Outputs VBB Output Input Clock Select
4–2
ECLinPS and ECLinPS Lite DL140 — Rev 3
元器件交易网
MC100LVE310 MC100E310
MC100LVE310 ECL DC CHARACTERISTICS
–40°C Symbol VOH VOL VIH VIL VBB VEE IIH IEE Characteristic Output HIGH Voltage Output LOW Voltage Input HIGH Voltage Input LOW Voltage Output Reference Voltage Power Supply Voltage Input HIGH Current Power Supply Current 55 Min –1.085 –1.830 –1.165 –1.810 –1.38 –3.0 Typ –1.005 –1.695 Max –0.880 –1.555 –0.880 –1.475 –1.26 –3.8 150 60 55 Min –1.025 –1.810 –1.165 –1.810 –1.38 –3.0 0°C Typ –0.955 –1.705 Max –0.880 –1.620 –0.880 –1.475 –1.26 –3.8 150 60 55 Min –1.025 –1.810 –1.165 –1.810 –1.38 –3.0 25°C Typ –0.955 –1.705 Max –0.880 –1.620 –0.880 –1.475 –1.26 –3.8 150 60 65 Min –1.025 –1.810 –1.165 –1.810 –1.38 –3.0 85°C Typ –0.955 –1.705 Max –0.880 –1.620 –0.880 –1.475 –1.26 –3.8 150 70 Unit V V V V V V µA mA

LW100中文使用说明书

爱安达LW 100系列使用手册LW 100 BLW 100 ELW 100 E1总论本手册包含安全使用LW充气机所必需的操作及保养程序。

所以请事先认真阅读并严格执行，任何违反说明所造成的后果不在本公司的保修范围内。

注意以下几点：●试用期内只充气瓶●请勿超过容器允许压力等级●对过滤系统做好保养●避免污染空气进入进气口●不得超出最高工作温度安全手则●仔细阅读操作手册●只允许专业人员操作本充气机●操作时，不得放置任何物体于机上●运转时，确保无任何人或物体触及运作的部件●确保进气清洁，无有毒气体●必须在拔掉充气机电线插头及泄压后，才可进行维护工作●定期检查是否漏气或漏油●不得焊接损坏的高压气管●充气管必须处于良好的工作状态，必须特别注意接口处●任何维护工作之前，必须拔掉电线插头●维护时，不得触及高温部件，待冷却后进行工作呼吸空气压缩机（LW100B；LW100E；LW100E1）应用便携式高压呼吸空气压缩机适用于移动或其他轻量充气应用.发动机LW100B：强力万达牌V4冲程发动机（4.5千瓦），集成式燃料箱，手拉式启动；低油水平时停机.LW100E：2.2千瓦电动马达/400伏3相电压 /50赫兹开关按钮，可连接电缆和16安CEE插口LW100E12.2千瓦 E 发动机/230伏电压/50赫兹或者60赫兹开关按钮，可连接电缆和CE插口配置∙不锈钢提携结构∙3级压缩机机头∙全部活塞带金属活塞环∙水/油分离器∙每级压缩有安全阀∙压力维持止回阀∙带不锈钢头的充气软管∙带压力表充气阀∙充气连接（DIN200巴带YOKE接口或DIN3OO巴）∙便携手柄∙呼吸空气净化纯度符合 EN12021/DIN 3188/ISP2533规程∙过滤器容量：在20摄氏度时大约为108立方米选项∙要加带充气阀和气瓶连接的进气软管∙替换的一套压力开关，以及限压300巴的安全阀,选择阀和第二只充气管/阀/连接装置∙终压时自动停机装置∙特选电压/频率充气首次充气前，请检查在额定工作压力条件下的最终安全阀和其他进气连接装置，以确保工作压力及(在充气时)能让压缩机自动停机(如果可能的话)的正确操作：这是通过关闭充气阀和压缩机来完成的,让压缩机形成压力,压力表将在压力维持表打开(大约启动后1分钟左右),才显示压力的增加.压力将增加到安全阀泄放或者自动切断压缩机.如果压缩机超过额定工作压力，而安全阀门不能自动泄放，请立即手动关闭压缩机并询问技术工程师。

MC100H680中文资料

ECEB TCEB TIO2 GT3 VT2 GT4 TIO3
MC10H680 MC100H680
FN SUFFIX PLASTIC PACKAGn 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Symbol GT1 TIO0 TDIR EDIR EIO0 VCCO1 EIO0B VEE EIO1 VCCO2 EIO1B EIO2 VCCO3 EIO2B VCCE EIO3 VCCO4 EIO3B ECEB TCEB TIO3 GT4 VT2 GT3 TIO2 TIO1 GT2 VT1 Function TTL Ground 1 TTL I/O Bit 0 TTL Direction Control ECL Direction Control ECL I/O Bit 0 ECL VCC 1 (0V) – Outputs ECL I/O Bit 0 Bar ECL Supply (–5.2/–4.5V) ECL I/O Bit 1 ECL VCC 2 (0V) – Outputs ECL I/O Bit 1 Bar ECL I/O Bit 2 ECL VCC 3 (0V) – Outputs ECL I/O Bit 2 Bar ECL VCC (0V) ECL I/O Bit 3 ECL VCC 4 (0V) – Outputs ECL I/O Bit 3 Bar ECL Chip Enable Bar Control TTL Chip Enable Bar Control TTL I/O Bit 3 TTL Ground 4 TTL Supply 2 (5V) TTL Ground 3 TTL I/O Bit 2 TTL I/O Bit 1 TTL Ground 2 TTL Supply 1 (5V)

MC100系列说明书(DOC)

为了您能安全地使用本设备，发挥其最大的功能，强烈建议在安装使用前先仔细阅读本说明书。

若有任何技术问题或对产品的意见和建议，请与本公司技术服务部联系。

2. 本控制器为智能开关设计，在雷雨天气或长时间不使用时，请关闭电源总闸。

3. 本控制器内有强电模块，严禁带电自行维修。

MC 系列小型可编程控制器编程手册

MC系列小型可编程控制器编程手册资料版本归档日期编码深圳麦格米特电气技术有限公司为客户提供全方位的技术支持，用户可与就近的深圳麦格米特电气技术有限公司办事处或客户服务中心联系，也可直接与公司总部联系。

内容如有改动，恕不另行通知。

深圳麦格米特电气技术有限公司地址：深圳市南山区沿山路18号中建工业大厦2栋6楼邮编：518067公司网址：电话：（0755）2669 3042传真：（0755）2669 3047前言目标读者本书适用于自动化技术人员，帮助他们掌握麦格米特可编程控制器（简称PLC）的编程、系统设计和调试技术；为初步及深入学习PLC编程知识的人员提供了参考。

手册内容本手册详细地描述了MC系列PLC的编程原理、软硬件编程资源、支持的编程语言和详细的指令说明，以及高速输入输出、通讯等技术参考内容；同时介绍了各功能的使用方法并穿插了应用实例。

手册编排本手册的章节编排由整体到细节，各章节具有独立的内容，可以从头通读逐步掌握MC系列PLC的全面内容，也可以随时查阅其中的章节，作为一些技术参考资料。

阅读指南1. 不熟悉PLC的读者对于初步接触PLC的读者，建议先阅读第一章到四章。

这些章节讲解了PLC基础知识，包括PLC功能说明、编程语言、程序要素、数据类型、寻址方式、软元件定义、程序注释功能与编程、主程序及子程序使用等等。

2. 熟悉PLC的读者对于已经熟悉PLC基本概念和编程工具的读者，可以直接阅读本书的第五章基本指令说明和第六章应用指令说明。

这两章提供了完整的麦格米特MC系列PLC指令说明。

如果想了解顺序功能图、高速IO、中断以及通讯功能的使用方法，请参阅第七到第十章。

如果想了解定位控制方面的功能，请参阅第十一章定位功能使用指南。

同时为了方便读者，本书的附录九指令排序索引表和附录十指令分类索引表还分别根据指令分类和指令英文名的字母顺序为读者提供了查找相关指令说明的工具。

诺曼燃烧器组件说明书

ContentsBURNER COMPONENTSPrimary Controls & Accessories (2)Ignitors & Accessories (3)PSC Motors (4)TEMPERATURE CONTROLSEZ Temp Controls & Accessories ........................................................................................................................................ 5-6 RESIDENTIAL OIL BURNERSEZ Oil Burners ..................................................................................................................................................................... 7-8 Oil Burner Cover Kit, CAP System Kit (9)99FRD (10)102CRD (11)Appliance Specific Resid ential Oil Burners (11)COMMERCIAL OIL BURNERS201CRD, 301CRD, 601CRD, 701CRD, 702CRD, 801CRD, 1050FFD, 1150FFD ............................................................... 12-19 Control Panels & OptionsOptional Control Sets (20)Control Panels (21)APPLIANCE SPECIFIC COMMERCIAL OIL BURNERS ....................................................................................................... 22-25RESIDENTIAL GAS BURNERSEZGas Pro ........................................................................................................................................................................... 26-27 Appliance Specific Residential Gas Burners.. (27)Gas Service Totes (28)COMMERCIAL GAS BURNERS201GAS (29)301GAS (30)601GAS (31)702GAS (32)801GAS (33)COMMERCIAL DUAL FUEL BURNERS702G/O (34)801G/O (35)APPLIANCE SPECIFIC COMMERCIAL GAS AND DUAL FUEL BURNERS ....................................................................... 42-45REPLACEMENT PARTSEZ Oil Burners ..................................................................................................................................................................... 46-47 EZ66, 99FRD, 102CRD Oil Burners .................................................................................................................................... 48-49 201-301 Oil Burners ............................................................................................................................................................ 50-51 601, 701, 702 Oil Burners ................................................................................................................................................... 52-53 801, 1050, 1150 Oil Burners .. (55)EZGas Pro Burners ............................................................................................................................................................. 56-57 G3B Gas Burners ................................................................................................................................................................ 58-59 201 Gas Burners ................................................................................................................................................................. 60-61 301 Gas Burners ................................................................................................................................................................. 62-63 601 Gas Burners ................................................................................................................................................................. 64-65 301/601 Gas Train ............................................................................................................................................................... 66-67 Original 702G & 702G/O Burners ........................................................................................................................................ 68-69 702G & 702G/O Train .......................................................................................................................................................... 70-71 801G & 801G/O Series Burners .......................................................................................................................................... 72-73 801 Series Gas Train ........................................................................................................................................................... 74-751BURNER COMPONENTSPrimary Controls2Parts List m Items that are shaded are considered stock items.3Parts List m Items that are shaded are considered stock items.B U RC O M P OBURNER COMPONENTSIgnitors and Accessories *Items included in 41000-SO-KIT.45000S4Parts List m Items that are shaded are considered stock items.BURNER COMPONENTS Primary/Ignitor ComboPSC Motors98022S5Parts List m Items that are shaded are considered stock items.T E M P E R A T U R EC O N T R O LS TEMPERATURE CONTROLSEZ-Temp Controls & AccessoriesDIRECT FIRED STORAGE WATER HEATER TEMPERATURE CONTROLS INSTALL PACKDIRECT FIRED STORAGE WATER HEATER TEMPERATURE CONTROLS6Parts List m Items that are shaded are considered stock items.COMMERCIAL DIRECT FIRED STORAGE WATER HEATER TEMPERATURE CONTROLSTEMPERATURE CONTROLSEZ-Temp Controls7Parts List mItems that are shaded are considered stock items.RESIDENTIAL OIL BURNERSEZ-PRO Burners with CoverRESIDENTIAL OIL BURNERSBurner in a BoxMost OEM burners are available with the cover. Consult the factory for pricing and part numbers.1. EZ-Pro Chassis (0.50-2.60)2. Carlin 98022 1/7 HP PSC Motor 3. Carlin 70200 Fully Adjustable Control 4. Carlin 45000 Ignitor 5. Suntec A2VA-3006 Single-Stage Fuel Unit with Integral Solenoid Valve 6. Single Pipe Oil Line7. 7", 9", or 11" Air Tube and Combustion Head with Stainless Steel Nose Cone1. EZ-1 Burner2. Burners with 70200 control have Carlin 45000 Ignitor, all other burners have 41000 Carlin Constant Duty Solid State Ignitor3. CAD Cell4. Single-Stage Pump ( EZ-Pro Only – Suntec 3006 Single-Stage Fuel Unit with Solenoid Valve )5. Air Tube6. Combustion Head7. Universal Flange and GasketR E S I D E N T I A L O I L8Parts List m Items that are shaded are considered stock items.RESIDENTIAL OIL BURNERSEZ Oil Burners0.50 - 2.50 GPH1. Burners with 70200 control have Carlin 45000 Ignitor, all other burners have 41000 Carlin Constant Duty Solid State Ignitor2. CAD Cell3. Carlin PSC Motor 1/7 hp, 3450 rpm4. Single-Stage Fuel UnitEZ-1The maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.9Parts List m Items that are shaded are considered stock items.R E S I D E N T I A L O IL RESIDENTIAL OIL BURNERSBurner Cover Kit / CAP System KitNote: All CAP System models require 7 Carlin 70200 Primary Control manufactured after Sept. 20184Cover Seal Kit (not shown) – 50433KITS8Air Pressure Switch Wiring Harness (not shown)93" Pipe Elbow w/ Birdscreen (not shown)RESIDENTIAL OIL BURNERS99FRD Oil Burners0.50 - 3.00 GPH2. CAD Cell3. Single-Stage Pump4. Carlin PSC Motor 1/7 hp, 3450 rpm5. 4" x 4" Junction Box for Field Wiring99FRDThe maximum high-fire capability is reducedslightly when firing (forced-draft) againstback-pressure. Visit formore information.R E S I D E N T I A L O ILRESIDENTIAL OIL BURNERS102CRD Oil Burners2.00 - 4.50 GPH1. Burners with 70200 control have Carlin 45000 Ignitor, all other burners have 41000 Carlin Constant Duty Solid State Ignitor2. CAD Cell3. Single-Stage Pump4. 4" x 4" Junction Box for Field Wiring5. Carlin PSC Motor 1/7 hp, 3450 rpm6. Carlin Instant Opening Oil ValveBURNERS FOR BOILERS & FURNACESCarlin manufactures hundreds of burners that are factory-set for specific oil-fired appli-ances (Consult Carlin’s Burner Setup Tables at ). These burn-ers (easily identified by a mounting flange that is welded onto the tube) can be purchased from the appliance manufacturer. If the appliance is no longer in production or the appli-ance manufacturer does not have the burner available, please contact us at 800-989-2275.RESIDENTIAL OIL BURNERSAppliance Specific BurnersThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.COMMERCIAL OIL BURNERS201CRD Oil Burners2.50 - 5.50 GPH1. Burners with 70200 control have Carlin 45000 Ignitor, all other burners have 41000 Carlin Constant Duty Solid State Ignitor2. CAD Cell3. Single-Stage Pump4. 4" x 4" Junction Box for Field Wiring5. Carlin PSC Motor, 1/4hp, 3450 rpm6. Carlin Instant Opening Oil Valve7. Pressure Augmentor8. Electronic Time Delay, 4 Sec. (Not Required with 70200 Control)201CRDThe maximum high-fire capability is reduced slightly when firing (forced-draft)against back-pressure. Visit for more information.C O M M E R C I A L O I LCOMMERCIAL OIL BURNERS301CRD Oil Burners3.00 - 7.00 GPH1. Carlin Pro-X 45000 Constant Duty Ignitor 3. Single Stage Pump4. 4" x 4" Junction Box for Field Wiring5. Carlin PSC Motor, 1/4hp, 3450 rpm6. Carlin Instant Opening Oil Valve7. Pressure AugmentorThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.COMMERCIAL OIL BURNERS601CRD Oil Burners6.00 - 13.20 GPH1. Burners with 70200 control have Carlin 45000 Ignitor, all other burners have 41000 Carlin Constant Duty Solid State Ignitor2. Two Stage Fuel Pump “B”3. Motor 1/2hp, 3450 rpm, 115V, 60 Hz4. Carlin Instant Opening Oil Valve5. Electronic Time Delay, 4 Sec. (Not Required with 70200 Control)The maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.C O M M E R C I A L O I LCOMMERCIAL OIL BURNERS701CRD Oil Burners6.00 - 13.20 GPH1. 45000 Carlin Solid State Ignitor2. Two Stage Fuel Pump “B”3. Motor 1/2hp, 3450 rpm, 115/208-230V, 60 Hz4. Low and High Fire Oil Valves5. Damper Motor with End Switch6. Electronic Time Delay, 4 Sec. (Not Required with 70200 Control)7. Motor Contactor – 2 Pole, 120V, 60HZ CoilThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.COMMERCIAL OIL BURNERS702CRD Oil Burners6.00 - 13.00 GPH1. Carlin Pro-X 45000 Constant Duty Ignitor2. Two Stage Two Step Fuel Pump “B”3. Motor 1/2hp, 3450 rpm, 115/208-230V, 60 Hz4. Low Fire and Redundant Oil Valve5. Damper Motor with End Switch6. Motor Contactor – 2 Pole, 120V, 60HZ Coil702CRDThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.C O M M E R C I A L O I LCOMMERCIAL OIL BURNERS801CRD Oil Burners11.40 - 19.80 GPH1. Carlin Pro-X 45000 Constant Duty Ignitor2. Two Stage Fuel Pump “B”3. Motor 3/4hp, 3450 rpm, 115/208-230V, 60 Hz, 1 Phase4. Low and High Fire Oil Valves5. Damper Motor with End Switch6. Motor Contactor – 2 Pole, 120V, 60HZ CoilThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.COMMERCIAL OIL BURNERS1050FFD Oil Burners15.00 - 25.00 GPH1. Motor 1hp, 1 Phase, 115/208-230V2. Motor Contactor – 2 pole, 120V, 60HZ Coil3. Burners with 70200 control have Carlin 45000 Ignitor, all other burners have 41000 Carlin Constant Duty Solid State Ignitor4. Two Stage Fuel Pump “J”5. Low and High Fire Oil Valves6. Air Tube/Combustion Head, Pedestal, Flange and Spacer7. Damper Motor with End SwitchNote: When ordering you must specify the following:1. Select “Control Option” from Price Book Page 22.2. Specify “Spacer Length” – 4" or 5" (4" or 5" spacer length required for Honeywell ultra-violet self-checking controls.)T he maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.C O M M E R C I A L O I LCOMMERCIAL OIL BURNERS1150FFD Oil Burners20.00 - 35.00 GPH1. Motor 1-1/2hp, 1 Phase, 115/208-230V2. Motor Contactor – 2 pole, 120V, 60HZ Coil3. 41000 Carlin Solid State Ignitor4. Two Stage Fuel Pump “J”5. Low and High Fire Oil Valves6. Air Tube/Combustion Head, Pedestal, Flange and Spacer7. Damper Motor with End Switch8. Air Flow Proven Switch9. Duplex Switch PackageNote: When ordering you must specify the following: 1. Select “Control Option” from Price Book Page 22.2. Specify “Spacer Length” – 4", 5", or 6" (4" or 5" spacer length required for Honeywell ultra-violet self-checking controls.)The maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.CONTROL PANELS & OPTIONSOptional Control Sets2. Meets Mass Code over 20 GPH where noted.3. Meets UL-296 over 20 GPH where noted.4. Meets NYC-BAR Code over 20 GPH and under 30 GPH where noted.5. Can be installed on all units under 20 GPH.6. S elected units meet IRI requirements with additional sensors installed. In addition to a non-recycling control, IRI requires the installation of a low oil pressure switch and an airflow switch.7. A ir flow switch, low oil pressure switch, and safety oil valve required for IRI. Air flow switch and safety oil valve required for FM.8. Scotch Marine boilers may require cutom panel - consult factoryTo substitute an optional control package for the standard control included in the chassis only price (Models 201CRD thru 801CRD) or the burner price (Models 1050FFD and 1150FFD), do the following: 1. Select optional control package to be substituted.2. Add control package cost, as shown in “Price Adder” column to base burner cost.Note: Air flow switch, low oil pressure switch, and safety oil valve required for IRI. Air flow switch and safety oil valve required for FM.C O M M E R C I A L O I LCONTROL PANELS & OPTIONSControl Panels• Burner-mounted panels are available on models: 201CRD, 301CRD, 601CRD, 701CRD, 702CRD, 801CRD, 1050FFD and 1150FFD burners.• Remote mountings are available for all Residential and Commercial burner models.• Price of control must be added.• A ll panel options are not compatible and all possible specification options are not covered. Each panel must be submitted to Carlin Engineering for final approvals and the exact price will be sent to the customer in the acknowledgment.STANDARD FEATURES • T erminal Block with required terminal modules (up to 25 terminal modules)• T erminal Block Marking Strip • S ervice Switch• Low Fire Switch (on 701CRD and larger only)• Circuit Breaker with reset (on control circuit)• Wiring Harness to accommodate specific control • Wiring Diagram• Removable Hinged Door • Hinged Top for easy accessNOTE: A ir flow switch, low oil pressure switch, and safety oil valve required for IRI. Air flow switch and safety oil valve required for FM. 6020002control does not meet IRI or FM requirements.COMMERCIAL OIL BURNERSAppliance Specific BurnersA P P L I A N C E S P E C I F I C O I LCOMMERCIAL OIL BURNERSAppliance Specific BurnersCOMMERCIAL OIL BURNERSAppliance Specific BurnersA P P L I A N C E S P E C I F I C O ILCOMMERCIAL OIL BURNERSAppliance Specific BurnersWeil-McLain Series 1 & 2 ONLY. No Application for 88 Series 3 Boilers.1. Pedestal Part No. 23317BLUS .2. Cover Kit (see next page)NOTE: EZGas Service Kit Totes – see page 28RESIDENTIAL GAS BURNERSEZGas Pro Gas Burner50,000 - 275,000 BTUHThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.R E S I D E N T I A L G A SRESIDENTIAL GAS BURNERSEZ-Gas Burner Cover KitRESCVR5S Cover Kit-Gas: Includes cover, backplate, mounting hardware, 8" field drilled orifice 33902FSShallow junction box kitNOTE: Fits EZGas Burners manufactured after August 9, 2012.50433KITIncludes: Filler Section for Backplate with mounting bolts, 4" Air Inlet with Mounting Screws, Insert for Oil Line Opening, 1-5/8"Grommet for BX Cable, push plugsGAS BURNERSGas Service Totes1. EZGAS Pro Burner Instruction Manuall2. 13" Flame Rod Wire ..............................................EZGFRWIRES3. Carlin Ignitor .........................................................4180002S14. Carlin 60200FR Control .........................................60200FRS5. 10" Electrode/Flame Rod ......................................98433AS6. 12" Electrode/Flame Rod ......................................98433BS7. 14" Electrode/Flame Rod ......................................98433CS8. Air Flow Switch 24V ..............................................50806S9. Gas Valve 24V .......................................................50824S 10. Flame Signal Test Jack & Ignitor Spark Tester .......99017S 11. Orifice Nipple .........................................................9938440XX 12. Full Firing Rate Kit A,B & 9S Diffuser & Airbands ...50808KITS13. Transformer 24V ....................................................50822S1. EZ-Gas Burner Instruction Manual2. 13" Flame Rod Wire ..............................................EZGFRWIRES3. Carlin Ignitor .........................................................4180002S14. Carlin 60200FR Control .........................................60200FRS5. 10" Electrode/Flame Rod ......................................98433AS6. 12" Electrode/Flame Rod ......................................98433BS7. 14" Electrode/Flame Rod ......................................98433CS8. Air Flow Switch 120V ............................................98522S9. Gas Valve .............................................................98523S 10. Flame Signal Test Jack & Ignitor Spark Tester .......99017S11. Orifice Nipple (9938440XX)R E S I D E N T I A L G A SCOMMERCIAL GAS BURNERS201GAS Gas Burners150,000 - 399,000 BTUH1. Pedestal Part No. 23358BLUS.Model 201GAS fires both natural & propane gas without a conversion kit.201GASThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.COMMERCIAL GAS BURNERS301GAS Gas Burners401,000 - 1,100,000 BTUHModel 301GAS fires both natural & propane gas without a conversion kit.99518C*1" Train99519C* 1 1/4" Train99924C* 1 1/2" Train99925C*2" Train*To meet Mass code, please add ‘EN” to part number.C O M M E R C I A L G A SCOMMERCIAL GAS BURNERS601GAS Gas Burners700,000 - 1,500,000 BTUH1. Pedestal Part No. 23382BLU1SModel 601GAS fires both natural & propane gas without a conversion kit.COMMERCIAL GAS BURNERS702GAS Gas Burners490,000 - 1,600,000 BTUH 1. Pedestal Part No. 23382SModel 702GAS fires both natural & propane gas without a conversion kit.The maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.C O M M E R C I A L G ASCOMMERCIAL GAS BURNERS801GAS Gas Burners1,400,000 to 2,499,9991. Gas Train Pedestal Part No. 23382S2. Auto Fuel-Changeover functionality available – consult factory3. 3 Phase Motor: Options for 208-230V or 460V - Consult Factory (Note: Alternate thermal overload required when changing voltage on site for 3 Phase motors only)Model 801GAS fires both natural & propane gas without a conversion kit. Only need to change pilot orifice.The maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.COMMERCIAL DUAL FUEL BURNERS702G/O Combination Gas/Oil Burners840 - 1600 MBH Gas / 6.0 - 11.2 GPH Oil1. Pedestal Part No. 23382SModel 702G/O fires both natural & propane gas without a conversion kit. Only need to change pilot orifice.C O M M E R C I A LD U A L F U ELCOMMERCIAL DUAL FUEL BURNERS801G/O Combination Gas/Oil Burners1400 to 2499 MBH Gas/10.4-17.5 GPH Oil1. Pedestal Part No. 23382S2. Auto Fuel-Changeover functionality available – consult factoryThe maximum high-fire capability is reduced slightly when firing (forced-draft) against back-pressure. Visit for more information.GAS BURNERSAppliance Specific BurnersA P P L I A N C E S P E C I F I C G A SGAS BURNERSAppliance Specific BurnersWeil-McLain Series 1 & 2 ONLY. No Application for 88 Series 3 Boilers.GAS BURNERS Appliance Specific BurnersMASS CODEA P P L I A N C E S P E C I F I C G A SGAS BURNERSAppliance Specific BurnersMASS CODEWeil-McLain Series 1 & 2 ONLY. No Application for 88 Series 3 Boilers.40Parts List m Items that are shaded are considered stock items.GAS BURNERSAppliance Specific BurnersVENTLESS41Parts List m Items that are shaded are considered stock items.A P P L I A N C E S P E C I F I C G A SGAS BURNERSAppliance Specific BurnersVENTLESSWeil-McLain Series 1 & 2 ONLY. No Application for 88 Series 3 Boilers.42Parts List m Items that are shaded are considered stock items.GAS BURNERSAppliance Specific702/801 Gas BurnersBURNHAMV906A 1010702GAS 50065V50602292461V907A 1198702GAS 50065V50602292461V908A 1386702GAS 50065V50602292461V909A 1674801GAS 52600A 602292461V911A 2136801GAS 52600B 602292461V912A2367801GAS52600B602292461PEERLESSLC-05881702GAS 50065V50S-1109-1LC-061077702GAS 50065V50S-1109-1LC-071273702GAS 50065V50S-1109-1LC-081469702GAS 50065V50S-1109-1LC-091664801GAS*52600A S-1109-1LC-101860801GAS*52600A S-1109-1LC-112056801GAS*52600A S-1109-1LC-122252801GAS*52600B S-1109-1LCE-132464801GAS*52600BS-1109-1*Spacer plate required – For 801GAS, order Part Number 51610AS - $123.33SMITH19A-6931702GAS 50065V50364019A-71137702GAS 50065V50364019A-81342702GAS 50065V50364019A-91548801GAS 52600A 364019A-101754801GAS 52600A 364019A-111989801GAS 52600A 364019A-122165801GAS52600B3640WEIL-MCLAIN780935702GAS 50065V50J209118801082702GAS 50065V50J209119801230702GAS 50065V50J2091110801378702GAS 50065V50J2091111801526801GAS 52600A J2091112801674801GAS 52600A J209114881010702GAS 50065V50386-300-2075881357702GAS 50065V50386-300-2076881701801GAS 52600A 386-300-2077882046801GAS 52600A 386-300-2078882382801GAS 52600B 386-300-207988R2482801GAS52600B386-300-207Contact Customer Service to confirm application prior to ordering. Some Burnham applications may have changed due to the DOE 2020 CPB efficiency standard.Weil-McLain Series 1 & 2 ONLY. No Application for 88 Series 3 Boilers.43Parts List m Items that are shaded are considered stock items.A P P L I A N C ES P E C I F I C G A SGAS BURNERSAppliance Specific702/801 Gas Burners99743G < 5" WC 1,000 1 1/2" Gas Train for Low Pressure up to 1,000,000 BTUH, Standard Pressure up to 1,400,000 BTUH.> 5" WC 1,40099743J < 5" WC 1,6002" Gas Train for Low and Standard Pressure up to 1,600,000 BTUH.> 5" WC1,600MASS CODE COMPLIANT TRAINS99743H< 5" WC 1,000 1 1/2" Gas Train for Low Pressure up to 1,000,000 BTUH, Standard Pressure up to 1,400,000 BTUH.> 5" WC 1,40099743K < 5" WC 1,6002" Gas Train for Low and Standard Pressure up to 1,600,000 BTUH> 5" WC1,600VENTLESS GAS TRAINS WITH LOW AND HIGH PRESSURE SWITCHES99743GNV< 5" WC 1,000 1 1/2" Gas Train for Low Pressure up to 1,000,000 BTUH, Standard Pressure up to 1,400,000 BTUH.> 5" WC 1,40099743JNV < 5" WC 1,6002" Gas Train for Low and Standard Pressure up to 1,600,000 BTUH.> 5" WC1,60051572G < 5" WC 1,400 1 1/2" Gas Train for Low Pressure up to 1,800,000 BTUH, Standard Pressure up to 2,100,000 BTUH.> 5" WC 1,80051572J < 5" WC 1,8002" Gas Train for Low and Standard Pressure up to 2,499,999 BTUH.> 5" WC2,499MASS CODE COMPLIANT TRAINS51572H< 5" WC 1,400 1-1/2" Gas Train with Low and High Gas Pressure Switches> 5" WC 1,80051572K < 5" WC 1,800 2" Gas Train with Low and High Gas Pressure Switches> 5" WC2,499VENTLESS DUAL FUEL TRAINS51601HV< 5" WC 1,400 1 1/2" Gas Train for Low Pressure up to 1,800,000 BTUH, Standard Pressure up to 2,100,000 BTUH.> 5" WC 1,80051601KV < 5" WC 1,8002" Gas Train for Low and Standard Pressure up to 2,499,999 BTUH.> 5" WC2,499I MPORTANT: Gas pressure can fluctuate based on local area demand. Select the gas train that corresponds to the lowest anticipated pressure. When in doubt, select the next larger train size or call Tech Support at 800-989-2275 for assistance.Weil-McLain Series 1 & 2 ONLY. No Application for 88 Series 3 Boilers.44Parts List m Items that are shaded are considered stock items.DUAL FUEL BURNERSAppliance Specific Burners702G/O & 801G/OBURNHAMV906A 7.001010702G/O 99753V50 4.00 60P N/A 100/300602292461V907A 8.301198702G/O 99753V50 5.00 60P N/A 100/300602292461V908A 9.601386702G/O 99753V50 5.50 60P N/A 100/300602292461V909A 11.601674801G/O 51600A 5.50 45H 4.00 45H 150602292461V910A 13.201905801G/O 51600A 6.50 45H 4.50 45H 150602292461V911A 14.802136801G/O 51600B 6.00 45H 6.00 45H 150602292461V912A16.402367801G/O51600B7.00 45H6.50 45H150602292461SMITH19A-6 6.50931702G/O 99751V50 3.75 60P N/A 100/300364019A-7 6.901137702G/O 99751V50 4.50 70B N/A 100/300364019A-89.301342702G/O 99751V50 5.00 70B N/A 100/300364019A-910.801548801G/O 51600A 5.50 45H 3.50 45H 150364019A-1012.201754801G/O 51600A 5.50 45H 4.00 45H 150364019A-1113.601989801G/O 51600A 5.50 45H 5.50 45H 150364019A-1215.002165801G/O51600B6.00 45H6.00 45H1503640PEERLESSLC-05 6.10881702G/O 99747V50 3.50 45P N/A 100/300S-1109-1LC-067.501077702G/O 99747V50 4.50 45P N/A 100/300S-1109-1LC-078.801273702G/O 99747V50 5.00 45P N/A 100/300S-1109-1LC-0810.201469702G/O 99747V50 6.00 45P N/A 100/300S-1109-1LC-0911.601664801G/O 51600A* 5.50 45H 4.00 45H 150S-1109-1LC-1012.801860801G/O 51600A* 6.00 45H 4.50 45H 150S-1109-1LC-1114.202056801G/O 51600A* 6.00 45H 5.50 45H 150S-1109-1LC-1215.602252801G/O 51600B* 6.50 45H 6.00 45H 150S-1109-1LCE-1317.002464801G/O51600B*6.50 45H7.00 45H150S-1109-1*Spacer plate required – For 801G/O, order Part Number 51610AS - $123.33WEIL-McLAIN780 6.50935702G/O 99752V50 3.75 45P N/A 100/300J20911880 6.501082702G/O 99752V50 4.50 45P N/A 100/300J209119808.501230702G/O 99752V50 5.00 45P N/A 100/300J2091110809.601378702G/O 99752V50 5.50 45P N/A 100/300J20911118010.601526801G/O 51600A 5.50 45B 3.25 45B 150J20911128011.601674801G/O 51600A 5.50 45B 4.00 45B 150J209114887.001010702G/O 99752V50 4.00 70P N/A 100/300386-300-2075889.401357702G/O 99752V50 5.50 60P N/A 100/300386-300-20768811.801701801G/O 51600A 5.50 45B 4.50 45B 150386-300-20778814.202046801G/O 51600A 6.00 45B 5.50 45B 150386-300-20788816.602382801G/O 51600B 6.50 45B 7.00 45B 150386-300-207988R17.202482801G/O51600B6.50 45B7.50 45B150386-300-207Contact Customer Service to confirm application prior to ordering. Some Burnham applications may have changed due to the DOE 2020 CPB efficiency standard.。

H600中文说明书

[W2 – 15AUG04]
Байду номын сангаас
目录
目录
常规安全概要 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii 符合性信息.. .. .. .. . .. .. .. .. .. . .. .. .. .. .. . .. .. .. .. . .. .. .. .. .. . .. .. .. .. . .. . v
x
H600 RFHawk
ZZZ
用户手册
*P077035700*
077-0357-00
xx
H600 RFHawk
ZZZ
用户手册

077-0357-00
Copyright © Tektronix. 保留所有权利。许可软件产品由 Tektronix、其子公司或提供商所有，受国家版权法及国际条约规定的保护。
Tektronix 产品受美国和外国专利权（包括已取得的和正在申请的专利权）的保护。本文中的信息将取代所有以前出版的资料中的信息。保留更改技术规格和价格的权利。
TEKTRONIX 和 TEK 是 Tektronix, Inc. 的注册商标。
DPX 是 Tektronix, Inc. 的商标。
Tektronix 联系信息
为得到本保修声明承诺的服务，客户必须在保修期到期前向 Tektronix 通报缺陷，并做出适当安排以便实施维修。客户应负责将有缺陷的产品打包并运送到 Tektronix 指定的维修中心，同时预付运费。如果产品返回地是 Tektronix 维修中心所在国家/地区的某地，Tektronix 将支付向客户送返产品的费用。如果产品返回地是任何其他地点，客户将负责承担所有运费、关税、税金和其他任何费用。

北美h6600中文使用手册

本中文译本仅供参考，如有歧义，以原英文版本为准。

目录第一章系统简介 (3)概述 (3)技术参数 (4)第二章控制放大器的安装与接线 (5)控制放大器的固定 (5)控制放大器接线 (5)驱动电机或伺服阀的接线 (5)探测器的接线 (5)液压锁定装置( 电磁阀’C’ ) 或电机制动器的接线 (6)警报器的接线 (6)外接测量仪表的接线 (6)远程安装带材置偏仪的接线 (6)纠偏辊置中或位置反馈传感器的接线 (6)电源连接 (6)AC接线端子 (7)DC接线端子 (8)电源 (9)伺服阀调零（仅电液伺服控制式纠偏系统适用） (9)第三章初始设定 (10)探测器的选择和标定 (10)H3109探测器的标定过程举例 (10)纠偏方向确认 (11)第四章系统的操作和运行模式 (12)自动控制模式 (12)手动控制模式 (12)纠偏辊置中控制模式 (12)H6600显示屏 (13)H6600按键说明 (15)H6600内部控制功能 (15)保险丝盒 (15)开关及其调节旋钮 (15)发光二极管 (16)优化系统功能的操作 (16)调节PID控制回路 (16)调节北美伺服阀的颤幅 (17)手动及自动控制速度的调节 (17)零点（纠偏基准点）的调节 (17)带材置偏仪的调节 (17)在带材一边同时安装两个探测器时的设定 (18)第五章探测器的标定 (19)探测器的选择和标定 (19)H3109,H3176,H3144,H3177,H3111和H3300探测器的标定 (19)H3167-300探测器的标定 (20)H3118,H3119,H3134,H3135,H3166,H3700或其它输出为1电压信号的传感器/探测器的选定 (20)H6600内部电压表功能的使用 (21)第六章系统功能设置菜单说明 (22)系统设置 (22)H6600系统设置菜单 (22)第七章H6600系统工作原理 (29)H6600系统的组成 (29)H6600电子控制器 (29)探测器 (29)带材置偏控制仪 (30)H6600一般工作方式 (30)H6600的控制原理 (31)PID控制回路 (32)纠偏辊架位置反馈回路 (32)纠偏辊置中控制回路 (32)探测器自动搜索定位控制回路 (33)错边卷取控制回路 (33)第八章故障诊断 (34)探测器故障诊断 (34)H6600控制放大器的故障诊断 (36)伺服阀和其它执行元件的故障诊断 (38)H6600 I/0 控制板 (40)保险丝的更换 (41)继电器的更换 (42)H6600的缺省设定 (42)第九章探测器自搜索定位控制电路（选购项目） (44)接线说明 (44)电源连接 (45)电机驱动器的接线与设置 (45)自搜索AC接线端子（TS402端子条上的A17-A23号端子）功能说明 (45)自搜索DC接线端子（TS401端子条上的D17-D22号端子）功能说明 (46)初始设定 (46)操作 (47)指示灯和继电器 (47)自搜索故障诊断 (47)第十章带材错边卷取控制电路（选购项目） (48)电气接线说明 (48)电源连接 (49)编码器的接线 (49)AC交流接线端子（TS402端子上的A20-A23端子）功能说明 (49)DC交流接线端子（TS401端子上的D23-D25端子）功能说明 (50)初始设定 (50)错边卷取故障诊断 (51)2第一章系统简介1—1 概述以微处理器为核心的H6600系列电子控制放大器适用于多种形式的纠偏场合，如带材对边纠偏、对中纠偏及其它主/从动纠偏系统等。

MC100H600中文资料

MC100H600FNG资料

MC100EP101FAR2G,MC10EP101FAR2G,MC100EP101MNR4G,MC10EP101MNR4G,MC10EP101MNG, 规格书,Datasheet 资料

NUC100中文手册

MC100EL1648DR2G;MC100EL1648DTR2G;MC100EL1648MNR4G;MC100EL1648DTG;中文规格书,Datasheet资料

MC100ES6039EG中文资料

H600中文说明书

MC100ELT22中文资料

MC100LVEL14DW中文资料

MC100系列说明书(DOC)

MC100H601中文资料

MC100E310FN资料

LW100中文使用说明书

MC100H680中文资料

MC100系列说明书(DOC)

MC 系列小型可编程控制器 编程手册

诺曼燃烧器组件说明书

H600中文说明书

北美h6600中文使用手册

MC 系列小型可编程控制器编程手册