KPA1按钮说明书
Philips LIFEPAK 1000 自动外部诊断器说明书
The rugged LIFEPAK 1000 defibrillator is an easy-to-use automated external defibrillator (AED) from the leader in defibrillation technology. But it’s also a defibrillatorpowerful and adaptable enough for professional responders, featuring advanced capabilities that can help improve lifesaving outcomes and speed the transition of cardiac patients to the next level of critical care.LIFEPAK ®1000 defibrillator power optionsPower Options for the LIFEPAK 1000The LIFEPAK 1000 defibrillator offers options that provide you with the flexibility to choose how you would like to manage power requirements for your device. You can choose between a rechargeable and non-rechargeable battery. With the Lithium-ion (Li-ion) rechargeable or Lithium Manganese Dioxide (Li MnO 2) non-rechargeable battery for the 1000, you will have the power you need.Which Battery is Right for You?Rechargeable battery is ideal for:• Emergency response systems with frequent use of both defibrillation and 3-lead ECG monitoring.• Emergency response systems also using the LIFEPAK 1000 for training simulation.• Batteries are rechargeable within 4.5 hours for multiple uses.Non-rechargeable battery is ideal for:• Emergency response systems with infrequent device use due to lower call volumes.•Public access users with infrequent device use.LIFEPAK 1000 rechargeable batteryLIFEPAK 1000non-rechargeable batterySpecificationsNon-rechargeable BatteriesType: Lithium Manganese Dioxide (Li/MnO2), 12.0 V, 4.5 AhCapacity: Typically will provide 440 200-joule discharges or 1030 minutes of operating time with a new battery (370 200-joule shocks or 900 minutes of operating time at 0°C (32°F)). Weight: 0.45 kg (1.0 lb)Shelf Life: (prior to installation) After the battery is stored for 5 years at 20° to 30°C, the device will provide 48 months of standby life. Standby Life: A new battery provides device power for 5 years.Low Battery Indicator: At least 30 200-joule shocks or 75 minutes of operating time remain when low battery is first indicated.Rechargeable BatteriesType: Lithium-ion, 11.1 V, 4.8 Ah, 5.3 WhCapacity: Typically will provide 261 200-jouledischarges or 608 minutes of operatingtime with a new fully-charged battery (247200-joule shocks or 576 minutes of operatingtime at 0°C (32°F)).Battery Charging Time: Within 4.5 hoursWeight: 0.45 kg (1.0 lb), maximumStandby Life: A new fully-charged batteryprovides device power for 6 months.Low Battery Indicator: At least 30 200-jouleshocks or 75 minutes of operating time remainwhen low battery is first indicated.Battery ChargerSupported Battery: Lithium-ionRechargeable Battery, 11.1 V, 4.8 Ah, 53 WhElectrical: External Power Supply: 100-240VAC, 50/60HzTemperature: Operating: 0°C to 40°CStorage: -30°C to 70°CCharge Time: Within 4.5 hoursCharge: Constant Current/Constant Voltagewithin temperature limitsLength: 270 mmWidth: 97 mmHeight: 92 mmWeight: 0.5 kgLIFEPAK1000 defibrillator power optionsLIFEPAK 1000 defibrillator power options provide:Simplicity• Simple to maintain—no conditioning or calibration required.• Battery gauge displays the state of charge on each battery at the touch of a button to help you ensure you always have the power you need in an emergency.Confidence in Our Products• The LIFEPAK 1000 AED with battery installed has an IP55 rating for protection against dusty and wet environments.• Stryker batteries are tested, verified, and certified to work with LIFEPAK devices.• Batteries offered by third party vendors are not tested, verified or certified by Stryker for use with LIFEPAK devices.LIFEPAK 1000 defibrillatorBRIEF SUMMARY OF INDICATIONS AND IMPORTANT SAFETY INFORMATIONINDICATIONS FOR USE:DEFIBRILLATION is a recognized means of terminating certain potentiallyfatal arrhythmias, such as ventricular fibrillation and symptomatic ventricular tachycardia. LIFEPAK 1000 is to be used in AED mode only on patients who are in cardiopulmonary arrest. The patient must be unresponsive, not breathing normally, and showing no signs of circulation. LIFEPAK 1000 may be used with standard defibrillation pads only on adults and children who are 8 years old or more or who weigh more than 25 kg (55 lbs). LIFEPAK 1000 may be used on children who are less than 8 years old or weigh less than 25 kg (55 lbs) with Infant/Child Reduced Energy Defibrillation Electrodes. ECG MONITORING is for use on conscious and unconscious patients of all ages for the purpose of ECG rhythm recognition and heart rate monitoring.CONTRAINDICATIONS: None.OPERATOR CONSIDERATIONS:LIFEPAK 1000 requires operator interaction to defibrillate patient. It is intended for use by personnel who are authorized by a physician or medical director and have, at a minimum, the following skills and training: CPR training, defibrillator training equivalent to that recommended by American Heart Association, and training in the use of the LIFEPAK 1000 defibrillator. LIFEPAK 1000 is intended for use in hospital and out-of-hospital environments. Manual mode is intended for use by personnel trained in ECG recognition who want to use defibrillator to deliver a shock independent of AED mode. Operator has control over charging and delivery of shocks. ECG mode provides a nondiagnostic ECG display and is intended foruse by personnel trained in ECG recognition to allow for rhythm and heart rate monitoring using standard ECG electrodes. When in ECG mode, the defibrillator’s shock capability is disabled; however, LIFEPAK 1000 continues to analyze patient’s ECG for potentially shockable rhythm.GENERAL/DEFIBRILLATION WARNINGS.SHOCK HAZARDS:• LIFEPAK 1000 delivers up to 360 joules of electrical energy. Unless properly used, this electrical energy may cause serious injury or death. Do not attempt to operate unless thoroughly familiar with operating instructions and function of all controls, indicators, connections, and accessories.• Clear everyone away from contact with patient, bed, and other conductive material before discharging defibrillator.• When discharging defibrillator, do not touch electrodes.• Do not immerse defibrillator in water or other fluids. Avoid spilling fluids on device or accessories.• Do not disassemble defibrillator or its batteries. Contact authorized service personnel for repair.Possible skin burns and ineffective energy delivery:• Dried out or damaged electrodes may cause electrical arcing and patient skin burns during defibrillation. Do not use electrodes that have been removed from foil package for >24 hours or expired electrodes. Check that electrode adhesive is intact and undamaged.Possible misinterpretation of ECG data:• Do not analyze in a moving vehicle or move the AED during analysis. Motion artifact may affect ECG signal resulting in inappropriate shock or no shock advised message. Motion detection may delay analysis. Stop vehicle.• Do not touch the patient or the AED during analysis. Excessive Energy Delivery (AED mode):• Do not use Pediatric QUIK-COMBO® electrodes; these electrodes do not attenuate the energy delivery by LIFEPAK 1000.Implanted electrical devices:• Defibrillation may interfere with implanted devices and cause them to malfunction. Place therapy electrodes away from implanted devices if possible. Possible defibrillator shutdown:• Always have access to spare, fully-charged, properly maintained battery to avoid possible device shutdown without warning.• Replace battery when LIFEPAK 1000 displays warning of REPLACE BATTERY. Possible device failure:• Do not modify LIFEPAK 1000 or its batteries.Possible explosion, fire, noxious gas or burns:• Do not use device in presence of flammable gases or anesthetics.• Use care when operating close to oxygen sources.• Turn off gas source or move source away from patient during defibrillation. Possible electrical interference or improper device performance:• Use only parts and accessories specified by Physio-Control or Stryker. Using other manufacturers’ accessories may affect performance of device or equipment in close proximity and may invalidate safety agency certification.• Defibrillator may cause electromagnetic interference (EMI) especially during charge and energy transfers which may affect performance of equipment operating in close proximity.• Equipment operating in close proximity may emit strong EMI or radio frequency interference (RFI) which could affect performance of device.• Recommended distances of equipment provided in Operating Instructions.• Safety risk and possible equipment damage.• Keep AED away from magnetic resonance imaging (MRI) equipment as it is unsafe. ECG MONITORING (ECG MODE) WARNINGS.Possible delay in therapy:• Do not attempt to connect 3-wire ECG cable to QUIK-COMBO therapy cable or any other AED.• ECG cable is functional only with LIFEPAK 1000.Possible misinterpretation of ECG data:• Frequency response of screen intended only for basic ECG rhythm identification; it does not provide resolution required for pacemaker pulse visibility, accurate measurements, such as QRS duration, and ST segment interpretation. For such purposes, use ECG monitors with appropriate frequency response.GENERAL CAUTION:Possible equipment damage:• Before using LIFEPAK 1000 disconnect all equipment that is not defibrillator-protected from patient.U.S. Federal law restricts this device to sale by or on the order of a physician. Please consult Operating Instructions at orcall 800.442.1142 for complete list of indications, contraindications, warnings, cautions, potential adverse events, safety and effectiveness data, instructions for use and other important information.Emergency CareThis document is intended solely for the use of healthcare professionals. A healthcare professional must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that healthcare professionals be trained in the use of any particular product before using it.The information presented is intended to demonstrate Stryker’s product offerings. A healthcare professional must always refer to operating instruc-tions for complete directions for use indications, contraindications, warnings, cautions, and potential adverse events, before using any of Stryker’s products. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your representative if you have questions about the availability of Stryker’s products in your area. Specifications subject to change without notice.Stryker or its affiliated entities own, use, or have applied for the following trademarks or service marks: LIFEPAK, QUIK-COMBO, Stryker. All other trademarks are trademarks of their respective owners or holders.The absence of a product, feature, or service name, or logo from this list does not constitute a waiver of Stryker’s trademark or other intellectual property rights concerning that name or logo.GDR 3312666_BCopyright © 2019 Stryker Manufactured by: Physio-Control, Inc. 11811 Willows Road NE Redmond, WA, 98052 U.S.A. Toll free 800 442 1142 Distributed in Canada by: Stryker Canada2 Medicorum Place Waterdown, OntarioL8B 1W2CanadaToll free 800 668 8323For further information, please contact Stryker at 800 442 1142 (U.S.), 800 668 8323 (Canada) or visit our website at 。
K-TEK PS45-0200-1 点级联动气动开关说明书
1.0 Description (3)2.0 Application (3)3.0 Operation (3)4.0 Mounting & Installation ..................................................................................................................................... (4)5.0 Warranty Statement (5)6.0 RMA Form (6)1.0 DescriptionThe K-TEK PS45 is a point level (on - off) pneumatic switch device used in conjunction with the K-TEK KM26 Mag-netic Liquid Level Gauge (MLG), LS Series Mechanical Cage Level switch or an External Chamber. The unique magnetic coupling action eliminates the need for such things as seals, diaphragms, springs or torque tubes. Since process connections to the switch are eliminated, the user is insured complete isolation from the process. Valves are not required to block off the switch from the process for maintenance or operational testing. Preventive mainte-nance functions are greatly reduced since the switch never contacts the process fluid.2.0 ApplicationThe PS45 is designed to provide a provide a pneumatic control signal dependent on the liquid level within a vessel. The device is configurable such that actuation can occur on rising and falling level. When a magnetic float passes in the first direction, the PS45 will route the input supply gas through to its output port. When the float passes in the opposite direction, the supply gas is shut off (disconnected) from the output port and the output port typically vented to the atmosphere. The PS45 thus provides the user with a pneumatic signal that can be used to activate alarms and/or open and close control valves. An example application would be the pneumatic operation of safety shutdown systems on oil and gas production equipment.3.0 OperationThe PS45 switch mechanism consists of the following integral components:1. Actuating cam-spindle-magnet assembly2. Precision Micropilot™ valve assembly3. User connections.As the magnetic float travels past the switch, the cam-spindle-magnet assembly actuates the Micropilot™ valve as-sembly. The switch will then provide for a path for the supply gas to travel between ports A-C or B-C, depending on the position of the float relative to the switch (see Figure 1). A continuous gas supply is not required for normal op-eration since the PS45 is not a pilot operated device. The PS45 is easily configured in the field as direct or reverseacting by simply changing the field connections at ports A & B. All user connections are 1/8 inch FNPT.4.0 Mounting & InstallationThe simplicity of mounting the PS45 switch housing is such that the only necessary tool is a small screwdriver. The switch is attached to the KM26 via two small stainless steel variable clamps. These clamps allow the switch to be positioned anywhere over the entire length of the float chamber, thereby providing an infinitely variable trip point set-ting. Loosening the clamps will allow the PS45 to be easily moved to provide a new trip point. Other switches can be added at any time without the concern for additional process piping or valves.PS45 Mounted on KM26 Magnetic Level GaugePS45 Mounted on LS Series Mechanical Level Switchdetermine how the option filter and vent fitting are supplied from the factory. The filter and vent fitting are easily changed in the field. Reference PS45 Datasheet (PS45-0202-1) for ordering details.5.0 Warranty Statement5 YEAR WARRANTY FOR:KM26 Magnetic Liquid Level Gauges; MagWave Dual Chamber System; LS Series Mechanical Level Switches (LS500, LS550, LS600, LS700, LS800 & LS900) (does NOT include switching mechanisms, ie. MS30, MS40, MS41, PS35 & PS45); EC External Chambers, STW Stilling Wells and ST95 Seal Pots.3 YEAR WARRANTY FOR:KCAP300 & KCAP400 capacitance switches. BETA Pressure and Temperature Switches have a limited factory guarantee, excluding wetted parts & consumables.2 YEAR WARRANTY FOR:AT100, AT100S and AT200 series transmitters; RS80 and RS85 liquid vibrating fork switches; RLT100 and RLT200 reed switch level transmitters; TX, TS, TQ, IX and IM thermal dispersion switches; IR10 and PP10 External Relays; MT2000, MT5000, MT5100 and MT5200 radar level transmitters; RI100 Repeat Indicators; KP paddle switches; A02, A75 & A77 RF capacitance level switches and A38 RF capacitance level transmitters; Buoyancy Level Switches (MS50, MS10, MS8D & MS8F); Magnetic Level Switches (MS30, MS40, MS41, PS35 & PS45).1 YEAR WARRANTY FOR:KM50 gauging device; AT500 and AT600 series transmitters; LaserMeter and SureShot series laser transmitters; LPM200 digital indica-tor; DPM100 digital indicators; APM100 analog indicators; KVIEW series digital indicators and controllers; GRANUPOINT and SLUDGE-POINT vibrating fork switches, SOLITRAK Electro-Mechanical Continuous Measuring Devices, KSONIK ultrasonic level switches, trans-mitters & transducers, ChuteMaster Microwave Transmitter / Receiver and TiltMaster Switches.SPECIAL WARRANTY CONSIDERATIONS:K-TEK does not honor OEM warranties for items not manufactured by K-TEK (i.e. Palm Pilots). These claims should be handled directly with the OEM.K-TEK will repair or replace, at K-TEK’s election, defective items which are returned to K-TEK by the original purchaser within the period specified above from the shipment date of the item and which is found, upon examination by K-TEK, to its satisfaction, to contain de-fects in materials or workmanship which arose only under normal use and service and which were not the result of either alterations, misuse, abuse, improper or inadequate adjustments, applications or servicing of the product. K-TEK’s warranty does not cover the repair or replacement of units that fail from the effects of excessive vibration unless the units are originally designed for vibration application. In addition, K-TEK’s warranty does not include on-site repair or services. Field service rates can be supplied on request.If a product is believed to be defective, the original purchaser shall notify K-TEK and request a Returned Material Authorization before returning the material to K-TEK, with transportation prepaid by the purchaser. (To expedite all returns/repairs from outside of the United States, consult K-TEK’scustomerserviceteam(********************)todetermineanoptimalsolutionforshippingmethodandtu rn-around time.) The product, with repaired or replaced parts, shall be returned to the purchaser at any point in the world with transportation prepaid by K-TEK for best-way transportation only. K-TEK is not responsible for expedited shipping charges. If the product is shipped to K-TEK freight collect, then it will be returned to the customer freight collect.If inspection by K-TEK does not disclose any defects in material or workmanship, K-TEK’s normal charges for repair and shipment shall apply (minimum 250.00 USD). The materials of construction for all K-TEK products are clearly specified and it is the responsibility of the purchaser to determine the compatibility of the materials for the application.THE FOREGOING WARRANTY IS K-TEK'S SOLE WARRANTY AND ALL OTHER WARRANTIES EXPRESSED, IMPLIED, OR STATU-TORY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE, ARE EX-CLUDED AND NEGATED TO THE MAXIMUM EXTENT PERMITTED BY LAW. NO PERSON OR REPRESENTATIVE IS AUTHOR-IZED TO EXTEND ANY OTHER WARRANTY OR CREATE FOR K-TEK ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF K-TEK’S PRODUCTS. THE REMEDIES SET FORTH IN THIS WARRANTY ARE EXCLUSIVE OF ALL OTHER REMEDIES AGAINST K-TEK. K-TEK SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES OF ANY KIND. K-TEK’S SOLE OBLIGATION SHALL BE TO REPAIR OR REPLACE PARTS (FOUND TO BE DEFECTIVE IN MATERIALS ORWORKMANSHIP) WHICH ARE RETURNED BY THE PURCHASER TO K-TEK.6.0 RMA FormK-TEK18321 Swamp Road Prairieville, LA 70769Phone: +1 (225) 673-6100 Fax: +1 (225) 673-2525Email:********************Toll Free: (800) 735-5835*** IMPORTANT CUSTOMER NOTICE: PLEASE READ PRIOR TO RETURNING PRODUCTS TO K-TEK***Be sure to include the Return Authorization (RA) number on the shipping label or package to the attention: Customer Service. A copy of this document should also be included with the packing list. K-TEK wants to maintain a safe work environment for its em-ployees. In the event, the returned product or material has been in contact with a potentially hazardous chemical, per federal regu-lations, the customer must provide evidence of decontamination and the related chemical composition and characteristics. In order to expedite your return, please include the applicable Material Safety Data Sheets (MSDS) and decontamination tags by affixing these documents in close proximity to the shipment label for identification purposes. (January 18, 2006)Completed by CustomerReasonProblem Found: NoneAction: None Requested:Is expedited return shipping requested? YesIf yes, please provide a purchase order or your shipper’s account number (ex. FedEx or UPS). K -TEK pays return transport via standard ground shipments only.If purchase order is issued, a copy of purchase order must be included with return documentation. Is K-TEK authorized to repair items determined to be non-warranty? YesIf yes, a copy of purchase order must be included with return documentation.Has product been in contact with any potentially hazardous chemical? YesIf yes, documentation product and forward MSDS to K-TEK, “ATTN: Customer Service”□ □ Customer PO: Account #: Date: □Return Repaired Product to AddressShipping Address:Billing Address:Ship Via:。
KPA300系列单相数字电参数测量仪使用说明书
KPA300系列单相数字电参数测量仪使用说明书( Rev.3.00 )深圳市科孚纳科技有限公司服务热线：400-179-1718目录第一章主要性能及技术指标 (3)第二章使用说明 (8)第三章串行口使用说明 (20)第四章继电器串使用说明 (21)第五章装箱清单 (21)第六章使用注意事项及故障排除方法 (22)第一章 主要性能及技术指标KPA300系列单相数字电参数测试仪采用了先进的32位高速处理器和双路24位AD 转换器，具有高精度、宽动态范围、结构紧凑灵巧等特点，是新一代数字化电参数测量仪器，可以测量有效值电压、电流、有功功率、视在功率、无功功率、电能累计、电能计时、频率、功率因数。
产品符合标准《DB37/T557-2005数字式电参数测量(试)仪》。
产品适用的型式批准证书编号：89E0105-37。
测试原理为：电压有效值为： Urms＝(∫0T V 2(t)dt/T)1/2电压直流分量为： Udc＝∫0T V(t)dt/T电流有效值为： Irms＝(∫0T I 2(t)dt/T)1/2电流直流分量为： Idc＝∫0TI(t)dt/T电压交流分量为： Uac＝（Urms 2-Udc 2）1/2电流交流分量为： Iac＝（Irms 2-Idc 2）1/2有功功率为： P＝∫0TV(t)• I(t)dt/T 视在功率为： S ＝Urms• Irms 功率因数为： PF＝P/(Urms*Irms) 无功功率为： Q ＝(S 2－ P 2)1/2选型说明 型号后缀代码 说明KPA300无标准型号 T 订制型号 A4 交流20mA-40A A6交流20mA-60A 接口 -R2 通信功能RS232 任选其一-R4 通信功能R485选件 /R 继电器接口（上下限报警输出） /EXT外部输入（电流钳或霍尔传感器）KPA300系列单相电参数测量仪－基本型功率，适合于生产线测试，可提供电流钳功能注意：订货时请对测试对象及特殊的技术要求、使用要求进行特别说明。
勇克1
4 5
机床的设计方案 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 19 技术数据 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 20
3.4
3.4.1 3.4.2 3.4.3 3.4.4 3.4.5 3.4.6 3.4.7 3.4.8 3.4.9 3.4.10
安全防护规定 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 11
3.4.10.1 工件的自动上下料过程 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4.10.2 用手装卸（选项） . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4.11 关断总开关 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
变送器调试说明书
智能压力变送器调试使用说明书1.按键功能概述1.1. 按键模式说明压力变送器表头上都有三个按键，分别为“M”、“S”、“Z”.➢Z键用于进入提示数据设置界面和移位;➢S键用于进入数据设置界面、增加数字和数据保存；➢M键用于数据保存.注：任何时候都可以按下“M“键，保存当前的设置数据。
2.按键功能2.1. 输入操作码2.1.1.操作码及对应功能现场使用按键组态时，LCD左下角“88”字符用于表示当前设置变量类型，也就是当前按键所执注：通过输入各个功能对应的操作码，可以快速进入对应功能。
➢例如输入“5”，直接进入设置阻尼功能。
➢例如输入“8"，直接进入设置输出特性。
2.1.2.操作码输入方法图例说明：1.均以当前采集值1 kPa，量程为0～100kPa为例2.2. 设置单位2.3. 设置量程下限假设原来的量程下限为0，新输入的量程下限为－40kPa。
2.4. 设置量程上限2.5. 设置阻尼2.6. 主变量调零（清零）功能2.7.设置输出特性2.8. 零点迁移与量程迁移 ［调零和调满］2.9.显示变量设置液晶显示屏能显示“电流”、“百分比”、“主变量”三种变量的一种或交替显示其中的两种（间隔时间4秒)。
在实时正常显示状态，使用S键能更改两个显示变量,当两个显示变量设定为相同的参数，屏幕上固定显示一种变量；当两个显示变量设定为不同的参数时,屏幕上交替显示两种变量。
方法如下：按下“S"键,当前显示变量(如：电流)发生变化，循环显示“电流、百分比、主变量”，当所需要的显示变量（如：主变量）出现在屏幕上时，松开“S”键，即实现了将显示变量“电流”改为“主变量”.更改显示变量过程中，左下角功能码显示“30"。
例子：假设当前显示变量为“电流”，需要设置为：交替显示“主变量”和“百分比"。
步骤：修改第一个显示变量：按下“S”键，液晶循环显示“电流、百分比、主变量",当显示“主变量”时，松开“S”键，即可。
马可波罗手泵与压力计操作指南与部件说明书
Presses WithHand Pump &Pressure Gauge Operating Instructions & Parts ManualModel Number SHP12XSHP25X Capacity 12 Ton 25 TonMAC TOOLS INC.505 N. Cleveland Ave. Suite 200 Westerville, OH 43082Save these instructions. For your safety, read, understand, and follow the information provided with and on this press.The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and Safety information shall be conveyed in the operators native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use of this product, remove from service immediately.Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If the press has been or suspected to have been subjected to a shock load, discontinue use until checked out by an authorized factory service center. Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment may require special training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that any missing or damaged parts, decals, warning / safety labels or signs be replaced with authorized replacement parts only. Any press that appears to be damaged in any way, is worn or operates abnormally shall be removed from service immediately until such time as repairs can be made.PRODUCT DESCRIPTIONMac Tools shop and bench presses are designed for use as an aid in assembling automotive and industrial components.Typical applications include installation and removal of alternator and power steering pump bearings, axle bearings,transmission bearings, seal, driveshaft bearings and u-joints and others. Each is designed to provide a positive means of performing clamping (gluing) and forming operations. It is not intended for use as an assembly table or as a fixture stand used to secure a large, final assembly component. Each press comes with a hand pump and pressure gauge set. The hand pump has a maximum rated pressure of 10,000 psi.Figure 1 - Model SHP12X & SHP25X ComponentsSPECIFICATIONSFigure 2 - Model SHP12XBT ComponentsASSEMBLYUse the parts drawing as your guide to assembly. Lay all parts and assemblies out in front of you before beginning.We recommend the following procedure:1. Attach base sections to upright channels with (4) M10bolts, washers and nuts. Hand tighten only.2. Attach lower cross member to upright channels with (4)M10 bolts, washers and nuts. Hand tighten only.3. Attach support links on both side with (4) M10 bolts,washers and nuts.4. Carefully slide bed frame section down, into its fully lowered position between the upright channels, secured by support pin.5. Attach pump support bracket on upright channel with (3)M10 bolts, washers and nuts.(for Model SHP12X and SHP25X only)6. Attach upper crossmember section to upright channels with (4) M16 bolts, spacers, washers and nuts.7. Attach head plate that support hydraulic unit to the upper crossmember with (2) M10 bolts.8. Tighten all applicable nuts, bolts, assemblies.9. Install pressure gauge set (see Figure 3):a. Remove the ram coupler (female) from the ram/hydraulic unit with 17mm wrench.BEFORE USE1. Read and understand instructional and warning materials provided with and on this product.2. Thoroughly familiarize yourself with this product.3. After assembly, check to ensure that applicable nuts and bolts are tight.4. Inspect before each use. DO NOT USE if bent, broken,cracked, leaking or otherwise damaged components are noted.5. Check for leaks in system and have repaired by qualified personnel as needed. Before repairs are made, depressurize system by opening the hand pump release valve counterclockwise, but no more than 2full turns.7. Replace worn or damaged parts and assemblies with Mac Tools Replacement Parts only (See Replacement Parts Section). Lubricate as instructed in Maintenance Section.8. Pumps should be stored where protected from the elements, abrasive dust, and damage. Pumps can be stored horizontally or vertically, but preferably not upside down.Note: It is owners responsibility to maintain the Instructional and Warning materials found with and onMAINTENANCEImportant : Use only a good grade hydraulic jack oil. We recommend Mobil DTE 13M or equivalent. Avoid mixing different types of fluid and NEVER use brake fluid, turbine oil, transmission fluid, motor oil or glycerin. Improper fluid can cause premature failure of the pump and the potential for sudden and immediate loss of load.Adding Hydraulic oil1. With ram fully retracted, unloaded position, disconnect hydraulic hose from application.2. With pump in its upright, horizontal position, remove oil filler screw located on top of the reservoir.3. Use a small funnel to fill reservoir to within 1/4” (6 mm) of the opening.4. Wipe up any spilled fluid and reinstall the oil filler screw.Changing oilFor best performance and longest life, replace the complete fluid supply at least once per year.1. Repeat # 2 above, then pour used fluid into a sealable container.2. Dispose of fluid in accordance with local regulations.3. Fill with a good quality hydraulic jack oil as recommended above. Reinstall oil filler screw.Note: Dispose of hydraulic fluid in accordance with local regulations.LubricationA periodic coating of light lubricating oil to pivot points and hinges will help to prevent rust and assure that pump assemblies move freely.CleaningPeriodically check the pump piston and ram for signs of rust or corrosion. Clean as needed and wipe with an oily cloth.Note: Never use sandpaper or abrasive material on these surfaces!OPERATIONSafety Message:Projectile Hazard! Ensure that workpiece is centerloaded and secure. Reduce risk of flying debris by carefully following all operating instruction. Know your press and the hazards associated with its use. Keep hands and feet from bed area at all times. Always centerload workpiece.1. Insert workpiece into bed frame, using every precaution necessary to ensure your safety and prevent property damage. Position workpiece in a manner which will not allow it to inadvertently fall from bed.2. Locate and close release valve by turning it clockwise firmly, until tight.3. Pump until ram nears workpiece.4. Align ram and workpiece to ensure centerloading.5. Apply load to workpiece by pumping handle. Do not overload workpiece.6. Remove load from workpiece by turning release valve counterclockwise. Stabilize workpiece in a manner which will not allow it to inadvertantly fall from the bed once the load is removed.7. Once ram has fully retracted, remove workpiece.Note: Never operate pump with release valve closed and disconnected from application. If operated in this condition,the hose and connections become pressurized. This increases burst hazard. Damage may occur to pump andits components.Risk of serious eye injury from projected or blown debris. Reduce risk by wearing safety goggles when working with or around press.SymptomPossible CausesCorrective ActionRam will not press loadRam will press, but not maintain pressureRam will not fully extend • Release valve not tightly closed • Overload condition• Fluid level low• Fluid level low• Air trapped in system• Release valve not tightly closed • Overload condition • Hydraulic unit malfunction • Ensure release valve tightly closed • Remedy overload condition• Ensure release valve tightly closed• Remedy overload condition • Contact Mac Tools Tech. Service • Open release valve, depressurize pump and hose, remove application, then drain fluid to proper level• Ensure proper fluid level• With ram fully retracted, remove oil filler screw to let air escape, then reinstall oil filler screwPoor extend performanceRam will not retract afterunloading• Linkage binding• Malfunctioning coupler • Reservoir overfilled• Lubricate all moving parts• Depressurize pump and hose, remove application, then replace a new one.•Open release valve, depressurize pump and hose, remove application, then drain fluid to proper levelTROUBLESHOOTINGONE YEAR LIMITED WARRANTYFor a period of one (1) year from date of purchase, Mac Tools Inc. will repair or replace, at its option, withoutcharge, any of its products which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.Performance of any obligation under this warranty may be obtained by returning the warranted product, freightprepaid, to Mac Tools Inc. Warranty Service Department, 505 N. Cleveland Ave. Suite 200 Westerville, OH 43082.Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE CONSUMER'SSOLE AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DE-SCRIBED ABOVE. (2) Mac Tools Inc. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY AND IS NOT COVERED BY THIS WARRANTY.Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not applyto you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.REPLACEMENT PARTSAvailable Parts: Please refer to the Parts drawing when ordering parts. Not all components of the press are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence. When ordering parts, give Model number, serial number and description. Call or write for current pricing: Mac Tools Inc. 505 N. Cleveland Ave. Suite 200 Westerville, OH 43082. Tel: 1800-MAC-TOOL (622-8665)Model SHP12X & SHP25X1T184-00001-000Upper Cross Member2 2T184-00002-000Upright Channel2 3T184-00003-000Pump Support Bracket1 4T184-00004-000Support Link2 5T184-00005-000Base Section2 6T184-00006-000Lower Cross Member1 75101-16115-000Bolt M16x1154 85202-00016-000Hex Nut M164 95303-00016-000Lock Washer 164 105301-00016-000Spacer 168 115102-10025-000Bolt M10x2517 125202-00010-000Nut M1015 135303-00010-000Lock Washer 1015 14T184-01000-000Support Pin2 15T184-02000-000Bed Frame1 16T184-03000-000Head Plate117T184-00007-000Arbor Plate 2 18T184-00008-000Bearing Punch 1 19F100-20000-000Hand Pump 1 20F100-30000-000Ram/ Hydraulic Unit 1 21F040-90009-K02Ram Coupler, Female 1 22F040-22201-000Hose Coupler, Male 1 23F100-90009-K01Pump Handle 1 24F040-90009-K01Oil Filler Screw 1 25CA3814Adapter 1 26GD2514Dry Pressure Gauge, 10kpsi 1 27CF3814Manifold 1 28CB1438Bushing 1 29GS2538Pressure Gauge Set -30F10Y0S-000Pump and Ram Set --T184-04000-000Hardware Kit --SHP12X-M0Manual 1Item Part#Description Qty 1T125-00001-000Upper Cross Member2 2T125-00002-000Upright Channel2 3T184-00003-000Pump Support Bracket1 4T184-00004-000Support Link2 5T184-00005-000Base Section2 6T184-00006-000Lower Cross Member1 75101-16150-000Bolt M16x1504 85202-00016-000Hex Nut M164 95303-00016-000Lock Washer 164 105301-00016-000Spacer 168 115102-10025-000Bolt M10x2517 125202-00010-000Nut M1015 135303-00010-000Lock Washer 1015 14T125-01000-000Support Pin2 15T125-02000-000Bed Frame1 16T125-03000-000Head Plate1Item Part#Description Qty 17T125-00007-000Arbor Plate 2 18T125-00003-000Bearing Punch 1 19F100-20000-000Hand Pump 1 20433-0-2100-106Ram/ Hydraulic Unit 1 21F040-90009-K02Ram Coupler, Female 1 22F040-22201-000Hose Coupler, Male 1 23F100-90009-K01Pump Handle 1 24F040-90009-K01Oil Filler Screw 1 25CA3814Adapter 1 26GD2514Dry Pressure Gauge, 10kpsi 1 27CF3814Manifold 1 28CB1438Bushing 1 29GS2538Pressure Gauge Set -30F25Y0S-000Pump and Ram Set --T125-04000-000Hardware Kit --SHP12X-M0Manual 1Parts List for Model SHP25X1T213-00001-000Upper Cross Member1 2T213+00002-000Upright Channel2 3T184-00004-000Support Link2 4T184-00007-000Arbor Plate2 5T184-00008-000Bearing Punch1 6T213-00003-000Lower Cross Member1 7T213-00004-000Base Section2 8T184-03000-000Head Plate1 9T213-01000-000Bed Frame1 10T184-01000-000Support Pin2 115101-16120-000Bolt M16x1204 125204-00016-000Nut M164 135301-00016-000Spacer 168175306-00010-000Lock Washer 108 18F100-20000-000Hand Pump1 19F100-30000-000Ram/ Hydraulic Unit1 20F040-90009-K02Ram Coupler, Female1 21F040-22201-000Hose Coupler, Male1 22F100-90009-K01Pump Handle1 23F040-90009-K01Oil Filler Screw1 24CA3814Adapter1 25GD2514Dry Pressure Gauge, 10kpsi 1 26CF3814Manifold1 27CB1438Bushing1 28GS2538Pressure Gauge Set-29F10Y0S-00Pump and Ram Set-LOAD - PRESSURE CORRELATION(for Models SHP12X, SHP12XBT & SHP25X)Always monitor the force applied to workpiece by using a load cell and indicator or you may monitor pressure developed in the ram by using an inline pressure gauge, then calculate the applied force using the formula:F = P x AFor model SHP12X & SHP12XBT, A = 2.41 in²For model SHP25X , A =4.91in²Example1Model SHP12X pressing 14,000 lbs will require what presure?Pressure = 14,000 lbs / 2.41 in² = 5,809 psi.Table 1. Correlation of Load & Pressure for 12 Ton & 25 Ton Presswhere F = Force/ Load (lbs);P = Hydraulic working pressure (psi) and;A = Ram effective area (in²)Example2Model SHP25X operating at 8,000 psi will gener-ate what force?Force = 8.000 psi x 4.91 = 39,280 lbs。
真空表功能规格说明书
真空表功能规格说明书
一、功能规格
1. 测量范围：-99~~0 Kpa超出显示ERR
2.分辨率：1 Kpa
3.测量精度：2 Kpa
4.显示方式：3位显示
5.单位显示：%Vac,Kpa
6.工作温度：-20~~60℃
7.工作电压：9.6V/650~~700mA/h镍氢电池供电
8.工作电流：小于0.5mA(不带射灯、背光和负载)
9.静态电流：小于5uA
10.自动关机：（有气压是否关机可选）没气压60秒关机
11.按键功能： M 键（中键）
12.低电检测：实时电压检测,显示分别为5格，4格，3格，2格，1格
13.出厂默认压力置：-55 Kpa(24C02可修改)
二、功能操作说明：
1、M键按键说明：每按一次压力单位切换一下，“%Vac→Kpa
→ %Vac”。
长按此键3秒后开启马达开始抽真空，直到抽真空到设定值
进才停止抽，若抽真空时放开了按键，则马上停止抽真空。
2、单位说明： Kpa：实时显示抽真空的压力值； %Vac：在抽的过程
中，压力值与设定值的百分比，到达设定值时为百分百。
3、功能说明：开机后，选择使用单位，长按M键不放，当压力抽到
-55Kpa时，立即停止抽真空，同时红色LED灯亮，表示抽气完成，此时可以放开按键，5秒后，红色LED灯熄灭（也可以按M键进行人为关闭）。
KPA系列软件操作视频配套资料
软件安装1，先打开我们的移动存储设备将存有安装原件的文件夹复制到电脑的磁盘中2，打开安装软件文件夹找到其中的Setup_CH文件双击打开，根据提示点击下一步，软件安装的位置选择默认的位置，选择任何人，点击下一步3，自动安装完成后点击关闭完成安装系统。
4，双击桌面上KELIPU的图标打开软件，确认且检验软件安装完毕。
软件操作1，双击桌面上的KELIPU图标打开软件，2，网格区域就是画布，双击画布可以调节画布的长度和有没有网格，，所有编辑的信息一定要在画布以内才可以喷印。
添加文本点击添加，选择文本，（文本信息指的是喷印时固定不变动的内容）双击文本框，然后在软件下方文本内容处打上我们需要喷印的信息。
如果需要喷印两行以上的就需要再次点击添加文本，信息不能超出画布，一般在居中的位置最佳。
添加计数点击添加，选择计数（计数为每喷印一次变动一位数字）双击画布上的计数信息框，在软件下方选择相应的条件。
示例：位数为4，前导零为0，连接符为m，起始为1，步长为1，重复为1，终止为9999.添加日期点击添加，选择日期，（可手动在文本处直接编辑固定的日期，选择添加日期后可通过调节机器主板时间来变化喷印时间）双击日期框，在软件下方选择相应格式即可，前导符内的日期可以去掉，添加图片点击添加，选择图片，（仅支持BMP和PNG格式）双击图片框，然后点击加载，图片的格式我们需要选择PNG和BMP格式的（一般BMP 格式的喷印出来清晰度高），选择图片，点击打开，打开以后再软件内任意位置点击鼠标左键图片就会显示出来，四个角的蓝色区域是用来调节字体大小的，将图片缩小到合适的尺寸放到画布以内。
编辑完成后，鼠标箭头放到信息上，左键按住不放就可以拖动信息位置，四个角的蓝色区域是用来调节字体大小的，按住鼠标左键不放就可以随意拖动大小，也可以通过屏幕下方属性栏中的大小来直接调节成为规矩的字体大小，信息不能超出画布，若信息长度超出了，则双击空白的画布后在软件下方长度处修改数据来增加或减少画布（喷印信息占用多少画布则画布数据就调节为多少。
Sensata P1K压力传感器说明书
| P1KPressure Sensor DescriptionFeatures• Compact Package• Amplified Temperature Compensated Linear Output • No Position Sensitivity Above 0-2” H2O • EMI/RFI and ESD Protected • Superior Output Signal Stability• Printed Circuit Board through Hole MountingThe P1K series of pressure sensors incorporates a piezo-resistive sensing element in a compact package. Using a 5 VDC supply voltage, the P1K provides a 0.25 VDC to 4.0 VDC output proportional to pressure. Internal temperature compensation provides and accurate, easy to use sensor. Theindustry standard terminal pins provides ease of use for your printed circuit board designs.Applications• Variable Air Volume Systems • Filter Pressure Monitoring • Duct Air Flow• Modulated Furnace Controls • Combustion Airflow • Gaseous Leak Detection • Medical Applications:Oxygen Concentrators, Ventilators, Anesthesia Equipment, CPAP , Wound Therapy.Pressure Ranges 2, 5, 10, +/-1, +/-2, +/- 5 inches of water;2.5, 5, 12.5, 25, +/-2.5, +/- 5, +/- 12.5 mbar Electrical Connection PCB thru hole terminal pins, 2.54 mm [.100 inch] pitch MAIN FEATURESTECHNICAL SPECIFICATIONS Pressure RangesPhysicalPerformanceElectricalDIMENSIONS Dimensions in mm [Inch]Page 4CONTACT USAmericas+1 (800) 350 2727***************************************Europe, Middle East & Africa +359 (2) 809 1826****************************Asia Pacific*************************.com China +86 (21) 2306 1500Japan +81 (45) 277 7117Korea +82 (31) 601 2004India +91 (80) 67920890Rest of Asia +886 (2) 27602006 ext 2808Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice.Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF.All products are sold subject to Sensata’s terms and conditions of sale supplied at SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION Revised 4/10/18ORDERING OPTIONSP1K Pressure sensor 0 -1” H20, .25 to 4.0 VDC output, no internal material seal, barbed tube fitting port with PCB Terminal Pin connection, no external material sealA: NoneAGENCY APPROVALS & CERTIFICATIONS。
NKK 半英寸直径处理封闭旋钮 G15 产品说明书
I n d i c a t o r s A c c e s s o r i e sS u p p l e m e n tT a c t i l e s K e y l o c k sP u s h b u t t o n sI l l u m i n a t e d P BS l i d e sP r o g r a m m a b l e R o c k e r sT o u c hT i l tT o g g l esElectrical Capacity (Resistive Load) For MRA: 250mA @ 125V ACFor MRF or MRK:0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)Note: Find additional explanation of operating range in Supplement section.Other RatingsContact Resistance: 10 milliohms maximum for MRA; 50 milliohms maximum for MRF & MRK Insulation Resistance: 100 megohms minimum @ 500V DCDielectric Strength:1,000V AC minimum for 1 minute minimum for MRA500V AC minimum for 1 minute minimum for MRF & MRK Mechanical Life: 30,000 operations minimum Electrical Life:10,000 operations minimumRange of Operating Torque:24.5 ~ 73.5mNm for MRA; 4.90 ~ 24.5mNm for MRF & MRK Contact Timing:Nonshorting (break-before-make)MRA – self-cleaning, sliding contact; MRF & MRK – self-cleaning, rotary contactor disk Indexing: 30°Materials & FinishesShaft: Brass with nickel platingStopper Plate: Steel with zinc plating for MRA & MRK; polyamide cover with stopper for MRF Mount: Zinc alloy with zinc platingMovable Contacts: Phospher Bronze with silver plating for MRA; phosphor bronze with gold plating for MRF & MRK End Contacts & Terminals: Brass with silver plating for MRA; phosphor bronze with gold plating for MRF & MRK Common Contacts & Terminals: Brass with silver plating for MRA; phosphor bronze with gold plating for MRF & MRK Case: Diallyl phthalate for MRA; fiberglass reinforced polyamide for MRF & MRKEnvironmental DataOperating Temperature Range: –10°C through +70°C (+14°F through +158°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F)Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hoursShock: 50G (490m/s 2) acceleration (tested in 3 right angled directions, with 3 shocks in each direction) Sealing: MRK model meets IP67 of IEC60529 standardsInstallationMounting Torque: .686Nm (6.08 lb •in)Cap Installation Force: 19.6 ~ 29.4N (4.41 ~ 6.61 lbf) for MRA & MRKProcessingSoldering Time & Temperature: Wave Soldering for MRA: See Profile A in Supplement section.Wave Soldering for MRF & MRK: See Profile B in Supplement section. Manual Soldering for MRA: See Profile A in Supplement section.Manual Soldering for MRF & MRK: See Profile B in Supplement section.Cleaning: Automated cleaning recommended. Stopper plate, as well as washers for MRA & MRK, must be in place to maintain automated cleaning. See Cleaning specifications in Supplement section.Standards & CertificationsMRA, MRF , & MRK models have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit.When used as intended in a logic-level circuit, the results do not produce hazardous energy.General SpecificationsI n d i c a t o r s A c c e s s o r i e s S u p p l e m e n t T a c t i l e s K e y l o c k s P u s h b u t t o n sI l l u m i n a t e d P B S l i d e s P r o g r a m m a b l e R o c k e r s T o u c hT i l t T o g g l esActual SizeLow profile body of MRF model accommodates space limitations required for PCB mounting. For the MRA and MRK bushing mount models, the range of behind panel body depths is .323” to .669” (8.2mm to 17.0mm).Positive detent mechanism for distinct feel and audible feedback. Metal bushing and housing construction increases durability. Adjustable stopper plate allows 2–12 position settings. High contact reliability achieved by the self-cleaning contact mechanism.Break-before-make contact timing with sliding contacts in MRA and rotary contactor disk in MRF and MRK models.Interior housing seal and molded-in PC terminals, plus shaft rubber o-ring on MRA and MRK and polyamide cover on MRF model, allow cleaning after automated soldering.MRK model meets IP67 of IEC60529 specifications (similar to NEMA 4 & 13).Distinctive CharacteristicsI n d i c a t o r sA c c e s s o r i e sS u p p l e m e n t T a c t i l e sK e y l o c k sP u s h b u t t o n s I l l u m i n a t e d P B S l i d e sP r o g r a m m a b l e R o c k e r sT o u c hT i l tT o g g l esTYPICAL SWITCH ORDERING EXAMPLEDESCRIPTION FOR TYPICAL ORDERING EXAMPLEMRA206-ANo Code BlackFor Color TippedA BlackB White CRed E Yellow F Green G Blue HGrayAShaft Actuated with PC TerminalsACTUATORS & TERMINALSShaft T erminalShaft Actuated with Plain Black KnobDP with 2-6Adjustable PositionsPC TerminalsFLow ProfileScrewdriver Actuated with PC TerminalsKLow Profile Shaft Actuated with PC TerminalsSlotted for TerminalScrewdriverShaft TerminalThk = (0.25) .010Thk = (0.25) .010I n d i c a t o r s A c c e s s o r i e s S u p p l e m e n tT a c t i l e sK e y l o c k sP u s h b u t t o n sI l l u m i n a t e d P BS l i d e sP r o g r a m m a b l e R o c k e r sT o u c h T i l tT o g g l esPOSITION SETTING FOR MRA, MRF, & MRK MODELSEach switch is supplied with the stopper set for the maximum number of positions allowed for that model. Prior to installation, the desired position setting should be made. Contact factory for continuous rotation.MRF Models1. Remove the protective cover from the switch body.2. Turn the shaft counterclockwise to the extreme left by using a screwdriver.3. Inside the cover is a magnifying lens which would be positioned over the number which is to be the maximum position used; when the cover is then snapped into the switch, the projection beside the lens fits into the correct hole for setting the stop.MRK & MRA Models1. Using the actuator knob, turn the shaft counterclockwise to the extreme left. If the shaft is not turned counterclockwise to the extreme left, proper setting can- not be achieved. At this extreme posi- tion, the white line on the knob points to the number 1 position shown on the side of the switch.2. Remove the knob from the shaft and loosen the nut far enough to allow rais- ing the stopper plate, plus washer(s), for resetting to the desired position.3. Note the position numbers on the side of the switch; these correspond to the terminal numbers and stopper holes. Insert the stopper in the hole numbered for the maximum desired number of stop settings. Satisfactory switch func- tioning cannot be assured if the stopper plate is not properly positioned.4. Tighten the nut (beveled side up) firmly against the stopper plate.Standard Mounting Hardware Packaged Loose with Each Switch:I n d i c a t o r s A c c e s s o r i e s S u p p l e m e n tT a c t i l e s K e y l o c k sP u s h b u t t o n sI l l u m i n a t e d P BS l i d e sP r o g r a m m a b l e R o c k e r sT o u c hT i l tT o g g l esTYPICAL SWITCH DIMENSIONSSingle Pole MRA112MRA • PC Terminals 1 Pole 2 Pole 4 PoleMRF • PC Terminals1 Pole2 Pole 4 PoleMRA112MRK112MRK devices are designed to be panel mounted. Installation without panel mounting will affect reliability.MRK • PC Terminals1 Pole2 Pole 4 PoleMRF403FOOTPRINTSDouble Pole MRA206Four Pole MRA403Single Pole MRF112MRK112Double Pole MRF206MRK206Four Pole MRF403MRK403.090I n d i c a t o r sA c c e s s o r i e sS u p p l e m e n tT a c t i l e s K e y l o c k sP u s h b u t t o n sI l l u m i n a t e d P BS l i d e sP r o g r a m m a b l e R o c k e r sT o u c hT i l tT o g g l esKNOBSAAT433Plain BlackColor Codes:BlackWhiteRedYellowGreenBlueABCEFGGrayHBase Material: Polyester Base Color:BlackPolyamide Tip Colors:A, B, C, E, F , G, HMaterial:Polyacetal Color: Black onlyBase Material:Polyester Base Color: BlackPolyamide Tip Colors:A, B, C, E, F , G, HBAT4103 Small Color TippedCAT4104 LargeColor TippedPANEL CUTOUTS & MAXIMUM EFFECTIVE PANEL THICKNESSWithout KeywaySTANDARD MOUNTING HARDWAREAT513MMetric Hexagon Nut Material:Brass, nickel plating 1 for MRA; 1 for MRKAT545Locking RingMaterial:Steel, chromate over zinc plating 1 for MRA; 1 for MRKAT509LockwasherMaterial:Steel, chromate over zinc plating 1 for MRA; 1 for MRKAT535Rubber RingMaterial:Nitrile butadiene rubber1 for MRKNonsealed PanelSealed PanelWith Standard Hardware on Nonsealed Panel:MRA .067” (1.7mm) MRK .087” (2.2mm)Without Locking Ring on Nonsealed Panel:MRA .098” (2.5mm) MRK .118” (3.0mm)With AT513M & AT535 only on Sealed Panel:MRK .106” (2.7mm)With KeywayOPTIONAL SUPPORT BRACKETAT543Support Bracket for MRK Material:Steel with tin platingA support bracket is needed when the MRK is mounted only to a PC boardand does not have the bushing through a panel..150MRA & MRKMRK.256.087.244。
德国KOBOLD压力开关PSD系列操作方法
德国KOBOLD压力开关PSD系列操作方法我司做自动化行业已经10年，在德国、美国、上海、广东都有自己的公司，专业从事进口贸易行业。
像KOBOLD科宝这个品牌为我司的优势品牌，我司技术人员跟国外厂家技术人员经常有沟通联系。
下面是我司技术人员通过这么多年对KOBOLD压力开关这个品牌的了解，针对KOBOLD压力开关操作方法所做出的内容介绍，详情如下：KOBOLD压力开关操作方法按键定义说明1.(ON/OFF)运行键：系统运行键，进行参数设置必须关闭运行键，否则设置无法进行。
2.(SET)设置键：短按此按键进入压力上下限设置状态，长按3秒进入系统设置状态。
3.增加键(▲)：按键一次数字增加0.01MP，长按2秒后数字增加0.1MPa。
4.减小键(▼)：按键一次数字减小0.01MP，长按2秒后数字减小0.1MPa。
kobold压力开关的操作方法1.设置控制压力的方法（1）短按(ON/OFF)运行键，关闭运行指示灯，压力控制系统关闭。
（2）设置控制上限/下限短按SET键1次，进入下限设置状态(对应下限指示灯亮)，通过(▲)(▼)设置数值,设置下限完成后，短按SET键进入上限设置，设置方法同上。
（3）设置完成后，按SET键将设定值自动存入电脑芯片（参数修改后，5秒钟内无按键操作会自动保存当前参数设置）。
（4）再次按(ON/OFF)运行键(对应运行指示灯亮)，电机开始工作。
2.单位切换方法：短按(ON/OFF)运行键，关闭运行指示灯，短按增加键(▲)可以将单位在MPa、Kg/cm、PSI之间任意切换。
设置完成后开启运行指示灯。
3.零位清零功能：短按(ON/OFF)运行键，关闭运行指示灯，长按减小键(▼)5秒可以将当前压力值清零,修正零位误差。
设置完成后开启运行指示灯。
(使用此功能时压力开关不得施加压力。
)系统功能模式长按SET键3秒钟进入系统设置，然后短按SET键依次显示以下功能模式。
所有功能模式设置完成后，按(ON/OFF)运行键将设定值自动存入电脑芯片。
LIFEPAK 1000 外科手术器械说明书
1000Product BrochureThe right tool at the right time.The rugged LIFEPAK 1000 defibrillator is an easy-to-use automated external defibrillator (AED) designed to be intuitive in high-stress situations. But it’s also a defibrillator powerful and adaptable enough for professional responders, featuring advanced capabilities that can help improve lifesaving outcomes and help speed the transition of cardiac patients to the next critical level of care.For every trained responder, the opportunity to make a difference.The LIFEPAK 1000 combines the simplicity of an AED with clear guidance, including on-screen and audio prompts with the flexibility of manual mode operation when indicated. Flexible setup options allow on-screen graphics for the basic rescuer or ECG display and access to manual mode for the more advanced rescuer. This powerful AED combines basic guidance with advanced operational control, enabling responders to deliver fast, appropriate treatment.With the LIFEPAK 1000, Basic Life Support (BLS)-trained responders have the device with powerful defibrillation—up to 360 joules—long battery life, and a rugged construction that can stand up to severe environments.When an Advanced Life Support (ALS)-trained professional does step in—either as a first responder or in transition to advanced care—the touch of a button puts the LIFEPAK 1000 into manual override, with greater control over when to analyze and shock. Its ECG capabilities provide critical information to guide your protocol and deliver timely treatment, and the device also stores this vital data for use in post-event review.Simple. Flexible. Powerful.Rugged, vehicle-friendly constructionh Rigorously drop-tested and includesprotective case and bumpers for durability in the harshest environments.h Designed to ride along in vehicle withoutdamage from continuous vibrations and other movement.Easy to useh Loud voice prompts and on-screengraphics provide clear guidance on applying electrodes and initiating a shock to help ensure user confidence.h Compatibility with other LIFEPAKdefibrillators and monitors help speed the transition to the next level of care. Post-event patient and performance data can be easily viewed, analysed and managed with CODE-STAT data review software – helping to target training needs.Clinically advanced, with robust featuresh Exclusive cprMAX™ Technology minimizes CPR interruptions by allowingresponders to perform pre-shock CPR while the AED charges.h Optional 3-lead ECG monitoring available when needed.h Includes features such as a CPR countdown timer, ECG capability, a shockcounter, and programmable settings – all on a large, easy-to-read LCD screen.h Escalating energy to 360 Joules, biphasic, for difficult-to-defibrillate patients.The right tool can make all the difference.cprMAX TechnologyThe LIFEPAK 1000 features our exclusive cprMAX technology, which gives you the flexibility to choose CPR settings that best accommodate your patient and CPR protocol requirements. The pre-shock CPR option allows adjustment of the CPR interval prior to the first shock, minimizing pre-shock pauses by allowing providers to continue compressions while the AED charges.LIFEPAK TOUGH™Built for the harsh environments,the LIFEPAK 1000 is the toughest,most durable AED from Stryker.The device itself withstandsrigorous drop-testing from anyangle at 1-meter, and is enclosedin a highly protective casewith bumpers. In addition,the LIFEPAK 1000 has receivedan P55 rating—for dust andwater resistance.360 JoulesLike every LIFEPAK defibrillatorfrom Stryker, the LIFEPAK 1000 canescalate energy up to 360J. Studiesshow repeating 200j shocks yieldssignificantly lower VF terminationrates.2,3 And the 2010/2015 ERCGuidelines note that rescuers mayconsider using escalating energyup to 360J if initial shocks at alower dose fail.4ALS Hand-offThe LIFEPAK 1000 is simple to use for trained responders, but it also provides an easy,highly compatible transition to ALS care teams. The shock counter on the LIFEPAK 1000 gives next level care teams insight into treatment provided. It has an available 3-lead ECG and its electrodes are the same ones used on LIFEPAK ALS monitors.ProCare® ServicesOur highly trained service technicians provide a comprehensive service solution for your Stryker equipment, so you can truly focus on what matters – saving lives. With our Prevent plan you will have a yearly maintenance and overview of the state of your equipment which will allow you better planning.ProCare Prevent plan includesh Repair or replacement of equipment, if during the warranty period your equipmentshows any defects in materialh Detailed service report and compliance documentation for each inspected itemh Inspection, adjustment, calibration, applicable software updates and replacementof specified partsh15% discount on all parts not included in the preventive maintenance scheduleContact your local Stryker representative today to learn more.Flex Financial ProgramOur financial programs provide a range of smart alternatives designed to fit your organization’s needs. We offer flexibility beyond a cash purchase with payment structures that can be customized to meet budgetary needs and help to build long-term financial stability. Contact your Stryker representative for more information.References1. Christenson J, et al. Chest Compression Fraction Determines Survival in Patients with Out-of-Hospital Ventricular Fibrillation. Circulation. 2009; 120: 1241-1247.2. Stiell, I., et al. (2007). “The BIPHASIC Trial: A randomized comparison of fixed lower versus escalating higher energy levels for defibrillation in out-of-hospital cardiac arrest.” Circulation. 115: 1511-1517.3. Koster RW, et al., Recurrent ventricular fibrillation during advanced life support care of patients with prehospital cardiac arrest. Resuscitation. 2008; 78: 252-257.4. 2010 American Heart Association guidelines for cardiopulmonary resuscitation and emergency cardiac care science. Circulation. 2010.Emergency CareThis document is intended solely for the use of healthcare professionals. A healthcare professional must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that healthcare professionals be trained in the use of any particular product before using it.The information presented is intended to demonstrate Stryker’s product offerings.A healthcare professional must always refer to operating instructions for complete directions for use indications, contraindications, warnings, cautions, and potential adverse events, before using any of Stryker’s products. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your representative if you have questions about the availability of Stryker’s products in your area. Specifications subject to change without notice.Stryker or its affiliated entities own, use, or have applied for the following trademarks or service marks: CODE-STAT, cprMAX, DT Express, LIFEPAK,LIFE-PATCH, ProCare Service, REDI-PAK, Stryker. All other trademarks are trademarks of their respective owners or holders.The absence of a product, feature, or service name, or logo from this list does not constitute a waiver of Stryker’s trademark or other intellectual property rights concerning that name or logo.11/2019M0000006958 REV AACopyright © 2022 Stryker All claims valid as of November 2019.For further information, please contact yourStryker representative or visit our website at Distributed by:Stryker UK LtdStryker HouseHambridge RoadNewbury, BerkshireRG14 5AWUnited KingdomClass IIbPhysio-Control, Inc.11811 Willows Road NERedmond, WA, 98052 U.S.A.Toll free 800 442 1142Stryker EuropeanOperations B.V.Herikerbergweg 1101101 CM AmsterdamNetherlandsTel +31 (0)43 3620008Fax +31 (0)43 3632001Distributed by:Stryker Australia Pty Ltd8 Herbert StreetSt Leonards NSW 2065AustraliaToll Free Tel 1800 987 982Toll Free Fax 1800 890 892Stryker New Zealand Limited515 Mt Wellington HighwayMt Wellington, Auckland 1060New ZealandTel +61 2 9415 5900Fax +61 2 80767672。
热泵操作手册
为使操作人员正确使用热泵，避免操作失误引起意想不到的事故或故障，特编写《热泵操作手册》。
一．盘面1.1外观1.2构成控制盘面由触摸屏、操作按钮及蜂鸣器构成。
二．键盘操作部分三．触摸屏触摸屏可以显示运转状态、数值数据及故障内容，并可以更改各种设定。
画面共有15个，分以下6种。
（1）流程画面……在热泵流程图上显示模拟量及动作状态。
（1个）（2）运转曲线画面……将各种模拟量用曲线显示出来。
（7个）（3）状态显示画面……表示各种模拟、运转状态数据。
（2个）（4）故障显示画面……显示故障、预置报警状态。
（2个）（5）模式切换画面……进行使用模式的切换、显示。
（1个）（6）设定画面……进行各种控制参数的设定。
（2个）注：发生故障时强制切换到《故障发生》画面。
四．画面解说4.1画面切换切换画面时，使用画面上的按钮。
（1）下部按钮：跳到不同功能的首页画面。
（2）2）上部按钮（1）下部下部按钮有以下几种：（1）流程图：跳转到系统循环流程画面（2）状态显示：跳转到各种运行状态数据的显示画面（3）趋势图：跳转到曲线画面（4）故障履历：跳转到故障一览显示画面（5）设定：跳转到运转模式、LSV、RSV的选择切换画面。
4.2输入设定值输入设定值时通过弹出《数字键盘》操作进行。
设定值的输入4.3流程画面显示加热流程图、模拟量、运转模式。
点击【抽气操作】按钮，出现三种抽气模式：自动抽气：将抽气装置设置在自动状态；手动抽气：将抽气装置设置在手动状态；试运转抽气：将机组设置在试运转模式，抽气装置设定在手动，按真空泵。
4.4动作曲线画面显示计测、演算的模拟数据曲线。
数据按1分钟为一个周期采集一次。
4.5状态画面（1）状态显示1（模拟量显示画面）表示各种模拟数据。
显示内容如下所示。
（2）状态显示2（运转状态画面）显示各种运转状态数据。
4.6故障显示（1）故障显示画面故障发生时，自动弹出故障画面。
本画面在故障主要原因消除后，按【操作选择键】的确认键。
初始气压开关说明书
SERIES 1950G Explosion-Proof Switch combines the best features of the popular
Dwyer® Series 1950 Pressure Switch with the benefit of natural gas compatibility. Units
Switch Type: 1 Form C relay (SPDT). Weight: 2 lb 15.7 oz (1.35 kg).
FEATURES/BENEFITS • Compatible with natural gas and suitable making it suitable for use in those
Electrical Rating: 10 A, 120/240 VAC, Agency Approvals: ATEX, CE, CSA,
28 VDC. Resistive 50 mA, 125 VDC.
FM, IECEx, UL.
applications • External set point screw provides easy access that simplifies making
gases.
120 or 240 VAC ±10% optional.
Wetted Materials: Contact factory.
Electrical Connections: Internal
Temperature Limits: 0 to 140°F
terminal block.
(-17 to 60°C). Note: Set point drift
Process Connections: 1/8˝ female
瑞尔科“SS-1”胶带压力开关操作手册说明书
‘SS-1”PRESSURE SWITCHOPERATION MANUALOMP# 4201 – 9/97REFERENCE “4102” SPEC SHEET The Ruelco “SS-1” pneumatic pressure switch is a three-way block and bleed valve that is operated by pressure acting on a piston opposing an adjustable spring force. It functions as either a normally closed or normally open valve depending on through which of the two ports the instrument pressure is supplied. These ports are marked as “HI IN” or “LO IN” on the switch body. The output port, marked “OUT” on the switch body, is the same for either mode of operation. Pressure applied to the sense port will cause the valve to operate.When the instrument supply pressure is connected to the “HI IN” port, the switch operates as normally open valve and is called a high switch. If sense pressure acting on the piston is at normal levels, it is insufficient to overcome the spring force. The middle O-ring on the spool is positioned between the “LO IN” and the “OUT” port, thus preventing the instrument pressure from passing to the “LO IN” port of the switch body, but allowing it to pass from the “HI IN” port to the “OUT” port. When the pressure acting on the piston becomes large enough to overcome the spring force, The spool shifts and the center O-ring moves between the “HI IN” port and the “OUT” port. Instrument pressure at the “OUT” port and downstream “BLEEDS” to atmosphere thru the “LO IN” port while supply pressure at the “HI IN” port is “BLOCKED from entering the “OUT” port.The pressure switch “BLOCK AND BLEED” action is the same when the instrument pressure is connected to the “LO IN” port and the “HI IN” port is left unused. For this mode of operation, the switch acts as normally closed valve and is called a low switch. When normal sense pressure is acting on the piston, the center O-ring on the spool is between the “HI IN” port and the “OUT” port, thus preventing the instrument pressure from passing to the “HI PORT” of the switch body, but allowing it to flow from the “LO IN” port to the “OUT” port of the switch body. When the sense pressure decreases to an abnormal level, the spring force shifts the spool and the middle O-ring on the spool becomes positioned between the “LO IN” port and “OUT” port. Pressure at the “LO IN” port is “BLOCKED” from entering the “OUT” port and pressure at the “OUT” port “BLEEDS” to atmosphere from the “HI IN port.Changing the sense pressure value when the switch is used as either a high or low is done by altering the force of the spring, the size of the sense piston diameter or both. Changing the spring force is accomplished by turning the adjustment plug to increase or decrease the spring compression. The piston diameter is changed by adding or removing o-rings on the piston or changing the piston.2.0INSTALLATION3.For switches using ¼” diameterpiston, 1 ¼” open end wrench or asuitable crescent wrench.The “SS-1” can be panel mounted (withoptional panel mount nut) or supported bypiping from the sense port in either verticalor horizontal positions. If the switch is4.High quality silicone base lubricant.5.An appropriate safety solvent. mounted horizontally, it is recommendedthat the small vent holes in the side of the switch body be oriented in a downward position. This will prevent any debris from accumulating in the spring cavity or above the sense piston. 3.1PARTIAL DISASSEMBLYA)Spring Removal3.1.1)If the switch is installed in anoperating instrument system, it is notnecessary to remove any instrumentsupply or sense pressure. If the unitis a high switch, it will trip whenchanging the spring; if it is a lowswitch, then it will not. Soprecautions should be taken to avoidany unwanted reactions in theinstrumentation system.Proper pipe thread sealant should be used on any pipe fittings threaded into the pressure switch ports. If stainless steel fittings are used, a sealant that will prevent galling is required. The supply gas flowing through the switch body should be filtered and free of large particles. If compressed air is used, it does not have to be lubricated. If naturalgas is used as the instrument pressure, then it should contain as little condensate or crude oil as possible. This will extend the life of the seals. When the switch is mounted using the ½” NPT base connection and the instrument pressure ports are not in the desired position after the base connection is adequately tightened, DO NOT loosen the body from the base to re-position the ports. Instead, remove the switch and re-make the ½” NPT connection. 3.1.2)To obtain access to the spring (Item2), rotate the lock ring (Item 5)clockwise to loosen it from thespring cap (Item 1).3.1.3)Rotate the spring cap (Item 1)counterclockwise until it isdisengaged from the switch body(Item 3).3.1.4)Remove the spring from its cavity inthe switch body. If the parts tube(Item 4) is inside the spring, careshould be taken not to lose it.3.0 DISASSEMBLY (See Spec Sheet) Tools and materials required for properdisassembly, repair and assembly are as follows: 3.1.5)Follow the procedures in repair andassembly section of the manual to re-install the spring.1.7/8” and 1-5/16” open end wrenchesor two crescent wrenches ofadequate size.B)Piston Removal3.1.6)If the switch is panel mounted, it isnot necessary to remove it from thepanel. It will be necessary to 2.Small pliers.disconnect any piping or tubing fromthe base that would prevent the basefrom being removed. When theswitch is supported by the ½” NPTconnection on its base (Item 17),disconnect any piping or tubing fromthe switch body that would preventits removal from the switch base.CAUTION: Be sure that allinstrument or sense pressures arecompletely bled to zero beforedisconnecting any piping or tubing.3.1.7)Use the appropriate wrenches to holdand loosen the base from the switchbody. Unthread the base completelyfrom the switch body.3.1.8)Use the small pliers and grip theraised ridge on top of the piston(Item 15) and pull if from the switchbase (Item 17).3.1.9)If the ¼” diameter piston (Item 19) isinstalled and must be removed fromthe large piston, use the properwrench to hold the ¼” diameterpiston and grip the large piston withthe pliers at the small diameter abovethe groove for the .5” piston o-ring(Item 18). Rotate either onecounterclockwise to loosen andseparate the piston.3.1.10)Remove the installed spring from thepiston.3.1.11)Procedures for re-installing thepiston o-rings are in the repair andassembly procedure of this manual.3.2FULL DISASSEMBLYNOTE: Use the followinginstructions to completelydisassemble the pilot for repair andcleaning. CAUTION: Be sure thatall instrument or sense pressures arecompletely bled to zero beforedisconnecting any piping or tubing.3.2.1)Follow the procedures stated underpartial disassembly to remove thespring.3.2.2)Remove the spool (Item 9) from theswitch body. If it is necessary, usethe small pliers and grip the largeend of the spool.3.2.3)The seals on the shaft may now bereplaced as per instructions given inthe repair and assembly section ofthis manual.4.0 REPAIR AND ASSEMBLY(See product data sheet forreplacement part numbers).4.1)Remove the seals from the spool andpiston.4.2)Clean all parts using an appropriatesafety solvent.4.3)Inspect the spool for any majordamage such as burrs or nicks on itsoutside diameter. Also inspect it forstraightness. Replace the spool (Item9) if damaged.4.4)Examine the polished bores of theswitch body (Item 3) for gouges andrough surfaces. Be sure that allheavy dirt deposits have beenremoved. Replace any damagedpieces.4.5)Replacement seals from an authenticRUELCO REPAIR KIT isrecommended to ensure properswitch performance.4.12) Install the piston fully into the switchbase (Item 17) and grip the raised edge on the piston with the small pliers and move the piston back and forth in the base to verify that it moves freely. 4.6)Install new seals on the spool and lightly lubricate the seals and spool. CAUTION: Do not leave excessive lubricant on the spool Doing so may prevent the switch from operating.4.7) Verify the required switch range from the Range Selection Chart on the specification sheet 4102.4.13) Thread the switch base into theswitch body and firmly tighten using the appropriate wrenches.4.8)Install the required o-ring on the large piston. CAUTION: Do not install more than one o-ring on the large piston. If the ¼” diameter piston (Item 19) is to be used, there should be no o-rings installed on the large piston. If a seal is to be installed on the large piston, do not re-install the ¼” diameter piston on the large piston even if the o-rings have been removed. Place it in the parts tube (Item 4) for further use. 4.14) Install the lock ring into the switchbody and place the spring plate into the body cavity. NOTE: If the switch is panel mounted, install it into the pane land secure with a panel mounting ring prior to installing the lock ring (Item 5) and spring plate (Item 7).4.15) Install the spring into the switchbody. CAUTION: Verify that the spring is the proper color for the range required as shown on the Range Selection Chart on the specification Sheet 4.9)When replacing seals on the optional ¼” diameter piston, install the back-up (Item 20) in the piston groove first. Be sure that the angle cut ends of the back-up overlap to form a flat surface. Slide the back-up towards the large piston and install the o-ring (Item 21). CAUTION: If using the ¼” diameter piston, be sure that all seals on the large piston are removed. Failure to do so will prevent the switch from operating.4.16) Place the parts tube inside the springand thread the spring cap onto the switch body. Adjust the switch operation as per user requirements and methods.4.10) Lightly lubricate the piston seals andpiston. DO NOT over lubricate or the switch performance may be adversely affected.4.11) Install the spool completely into theswitch body. Move it in and out of the body approximately ¼” to check that it moves freely.5.0 RECOMMENDED MAINTENANCEPROCEDURE MAINTENANCE5.1) Test Switch Trip Pressure Every 30 days 5.2) Disassembly, inspect and lubricate Yearly or as required 5.3) Replace all seals Every two years or as required6.0 TROUBLESHOOTINGPROBLEM PROBABLE CAUSE RECOMMENDED ACTION1) Switch does not operate when high or low trip pressure are exceeded during testing or normal operation. A) Switch adjustment tampered with Re-adjust switch per operating requirements. B) Debris plugging sensor body (Item 3) ports. Disassemble switch as perprocedure in Section 3.0 andclean switch body. Clean instrument system filters.C) Spring (Item 2) malfunction. Remove the spring cap (Item 1)and inspect spring (Item 2) for damage. Replace if necessary.D) Debris plugging the base sense port (Item 17) or the piston (Item 15 or 19). Remove base and piston as perprocedure in Section 3.0 and clean. Begin cleaning on aregular basis.E) More than one o-ring installed on the piston.Remove extra o-rings.F) Spool seals (Item 8 and 12) and/or piston seals (Items 16,18 or 21) swollen. Disassemble as per procedures inSection 3.0 and 4.0. Try better filtration to keep condensate outof supply gas.2) Gas or liquid leaking from small hole below spring cap. A) Damaged spool o-ring (Items 8 and 12). Disassemble and repair as per procedures in Section 3.0 and 4.0 3) Gas or liquid leaking from small hole above switch base. A) Damaged spool o-ring or piston o-ring. Disassembly and repair as per procedures in Section 3.0 and 4.0 4) Deadband and set point repeatability are larger than switch specifications. A) Switch o-ring dry. Follow procedures in Section 3.0 and 4.0 to disassemble the switch. Lubricate all seals and re-assemble. B) Cause E for Problem #1 Same as Problem #1. C) Cause F for Problem #1. Same as Problem #1.。
KPA 系列 调试手册
KPA-30P
KPA 系列调试手册
KPA 系列操作说明
目前 KTV 在国内不论专业营业性的消费，还是家庭中的娱乐都广为流行。但是因建声环境与设 备不理想给很多音响调试者带来很多的烦恼。 现将多数 KTV 场所存在的一些问题列举如下： 1．系统配置 2．反馈、啸叫（飞咪） 3．低音浑浊、失真 4．话筒人声薄弱、毛躁、齿音重、人声浑浊、鼻音重、不清晰 5．音箱工作不稳定、易损 6．K 歌与劲舞不能同时保持最佳效果 7．调试好的效果营业后因客人的特殊要求而把数据调乱 本公司的 KPA 系列产品能完全满足大家的要求。下面我们详细的来解说一下 KPA 系列产品的 功能以及针对以上问题的解决方案：
TICO DEBUGGING MANUAL
KPA 系列调试手册
KPA 系列调试手册 目录 KPA 系列操作说明 .................................................................................3 系统配置 ................................................................................................3 反馈、啸叫（飞咪）...............................................................................6 低音浑浊、失真 .....................................................................................10 话筒人声薄弱、毛躁、齿音重、人声浑浊、鼻音重、不清晰 .......................11 人声效果调试 .......................................................................................13 音箱工作不稳定、易损 ...........................................................................15 K 歌与劲舞不能同时保持最佳效果 ........................................................15 调试好的效果营业后因客人的特殊要求而把数据调乱 ..........................16 KPA 系列软件说明 ...............................................................................18 常见问题及应对解决办法 ...................................................................22
Kingbright KPA3010-1 LED说明书
BRIGHT RED (GaP) BRIGHT RED (GaP) BRIGHT RED (GaP) HIGH EFFICIENCY RED (GaAsP/GaP) HIGH EFFICIENCY RED (GaAsP/GaP) HIGH EFFICIENCY RED (GaAsP/GaP) YELLOW (GaAsP/GaP) YELLOW (GaAsP/GaP) YELLOW (GaAsP/GaP) SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT GREEN (GaP) SUPER BRIGHT GREEN (GaP) SUPER BRIGHT GREEN (GaP) SUPER BRIGHT YELLOW (InGaAlP) SUPER BRIGHT YELLOW (InGaAlP) SUPER BRIGHT YELLOW (InGaAlP)
1-KPA3010-3
Yellow KPA-3010YD, KPA-3010YC, KPA-3010YT Super Bright Red KPA-3010SRD, KPA-3010SRC, KPA-3010SRT
1-KPA3010-4
Super Bright Green KPA-3010SGD, KPA-3010SGC, KPA-3010SGT Super Bright Yellow KPA-3010SYD,KPA-3010SYC, KPA-3010SYT
RED DIFFUSED WATER CLEAR RED TRAS. RED DIFFUSED WATER CLEAR RED TRANS. YELLOW DIFFUSED WATER CLEAR YELLOW TRANS. RED DIFFUSED WATER CLEAR RED TRANS. GREEN DIFFUSESD WATER CLEAR GREEN TRNS. YELLOW DIFFUSESD WATER CLEAR YELLOW TRNS.
Dwyer Instruments 单压力开关说明书
Single Pressure SwitchesPRESSURE87D Series Pressure Switch with Mercury Switch and General Purpose EnclosureD Series Pressure Switch with Snap Action Switch and General Purpose EnclosureMinimum Deadband (psig) 2˝ Hg13.5 11 1.7533.7568126846814 14 25 6090 150 450 750 7 3 7 618 30 75 100210 Adjustable DeadbandBourdon Tube Material Brass 403 Stainless Steel 316 Stainless Steel AdjustableOperating Range (psig)30˝– 0 Hg VAC 10˝ Hg VAC - 12 25˝ Hg VAC - 50 1/8 – 15 1/8 – 20 1 – 35 2 – 60 5 – 100 5 – 150 10 – 200 10 – 300 30˝ Hg VAC – 60 30˝ Hg VAC – 75 2 – 60 5 – 100 10 – 200 10 – 300 40 – 350 25 – 600 50 – 1000 100 – 1500 300 – 2500 500 – 5000800 – 800030˝ Hg VAC – 755 – 7510 –10010 – 15010 – 30030 – 40075 – 800100 – 1000200 - 2500SPDT4A @ 120 V 2A @ 240 V AC/DC DA-31-153-2 DA-31-153-3DA-31-153-27DA-31-153-1DA-31-153-3A DA-31-153-4DA-31-153-5DA-31-153-6DA-31-153-7DA-31-153-8DA-31-153-9DA-21-153-25S DA-21-153-26S DA-21-153-5S DA-21-153-6S DA-21-153-8S DA-21-153-9S DA-21-153-9AS DA-21-153-10S DA-21-153-11S DA-21-153-12S DA-21-153-13S DA-21-153-15S DA-21-153-16S DA-41-153-26E DA-41-153-23E DA-41-153-6E DA-41-153-24E DA-41-153-9E DA-41-153-21E DA-41-153-22E DA-41-153-11E DA-41-153-13ESPST Open on Increase 10A @ 120 V 5A @ 240 V AC/DC DA-31-2-2DA-31-2-3DA-31-2-27 DA-31-2-1 DA-31-2-3A DA-31-2-4 DA-31-2-5 DA-31-2-6DA-31-2-7 DA-31-2-8 DA-31-2-9 DA-21-2-25S DA-21-2-26S DA-21-2-5S DA-21-2-6S DA-21-2-8S DA-21-2-9S DA-21-2-9AS DA-21-2-10S DA-21-2-11S DA-21-2-12S DA-21-2-13S DA-21-2-15S DA-21-2-16S DA-41-2-26E DA-41-2-23E DA-41-2-6E DA-41-2-24E DA-41-2-9E DA-41-2-21E DA-41-2-22E DA-41-2-11E DA-41-2-13E Bourdon Tube Material Brass Stainless Steel 316 Stainless Steel Adjustable Operating Range (psig)0-30˝ Hg VAC 10˝ Hg VAC - 1225˝ Hg VAC - 501/8 – 151/8 – 201 – 352 – 605 – 1005 – 15010 – 20010 – 30030˝ Hg VAC – 6030˝ Hg VAC – 752 – 60 13.55 – 100 19.510 – 200 22.510 – 300 28.540 – 350 3025 – 600 67.550 – 1000 142.5100 – 1500 195300 – 2500 390500 – 5000 1350800 – 8000 225030˝ Hg VAC – 755 – 7510 –100 10 – 150 10 – 300 30 – 40075 – 800100 – 1000200 - 2500Minimum Deadband(psig)13.5˝ Hg 612667.59 13.524 2437.5 1822.513.519.5 22.5 28.53067.5142.5 195 390 1350 2250151215 16.54278 180285600Fixed 3˝ Hg 1.52.51.51.51.522.53453.53.533.5466102030602005003.543.548102535 75Fixed 5˝ Hg33.7533333.75 5.256.75 95.25 5.254.5 5.25 7.12510.5 10.5 18 33 52.5 90 300 5.2565.25 6.75 12 18 37.5 52.5 112.5Adjustable Deadband SPDT: 10A @ 120/240 VAC Fixed Deadband SPDT: 15A @ 120/240 AC Hermetically Sealed, Fixed Deadband SPDT: 5A @ 120/240 VAC, 5A res. @ 30 VDCCALL TO ORDER | 800/872-9141Model DA-7031-153-2DA-7031-153-3DA-7031-153-27DA-7031-153-1DA-7031-153-3A DA-7031-153-4DA-7031-153-5DA-7031-153-6DA-7031-153-7DA-7031-153-8DA-7031-153-9DA-7021-153-25S DA-7021-153-26S DA-7021-153-5S DA-7021-153-6S DA-7021-153-8S DA-7021-153-9S DA-7021-153-9AS DA-7021-153-10S DA-7021-153-11S DA-7021-153-12S DA-7021-153-13S DA-7021-153-15S DA-7021-153-16S DA-7041-153-26E DA-7041-153-23E DA-7041-153-6E DA-7041-153-24E DA-7041-153-9E DA-7041-153-21E DA-7041-153-22E DA-7041-153-11E DA-7041-153-13E Model DS-7231-153-2DS-7231-153-3DS-7231-153-27DS-7231-153-1DS-7231-153-3A DS-7231-153-4DS-7231-153-5DS-7231-153-6DS-7231-153-7DS-7231-153-8DS-7231-153-9DS-7221-153-25S DS-7221-153-26S DS-7221-153-5S DS-7221-153-6S DS-7221-153-8S DS-7221-153-9S DS-7221-153-9AS DS-7221-153-10S DS-7221-153-11S DS-7221-153-12S DS-7221-153-13S DS-7221-153-15S DS-7221-153-16S DS-7241-153-26E DS-7241-153-23E DS-7241-153-6E DS-7241-153-24E DS-7241-153-9E DS-7241-153-21E DS-7241-153-22E DS-7241-153-11E DS-7241-153-13E Model DS-7331-153-2 DS-7331-153-3 DS-7331-153-27 DS-7331-153-1 DS-7331-153-3A DS-7331-153-4 DS-7331-153-5 DS-7331-153-6 DS-7331-153-7 DS-7331-153-8 DS-7331-153-9 DS-7321-153-25S DS-7321-153-26S DS-7321-153-5S DS-7321-153-6S DS-7321-153-8S DS-7321-153-9S DS-7321-153-9AS DS-7321-153-10S DS-7321-153-11S DS-7321-153-12S DS-7321-153-13S DS-7321-153-15S DS-7341-153-26E DS-7341-153-23E DS-7341-153-6E DS-7341-153-24E DS-7341-153-9E DS-7341-153-21E DS-7341-153-22E DS-7341-153-11E DS-7341-153-13E SPSTClose on Increase 10A @ 120 V 5A @ 240 VAC/DCDA-31-3-2DA-31-3-3DA-31-3-27DA-31-3-1DA-31-3-3ADA-31-3-4DA-31-3-5DA-31-3-6DA-31-3-7DA-31-3-8DA-31-3-9DA-21-3-25SDA-21-3-26SDA-21-3-5SDA-21-3-6SDA-21-3-8SDA-21-3-9SDA-21-3-9ASDA-21-3-10SDA-21-3-11SDA-21-3-12SDA-21-3-13SDA-21-3-15SDA-21-3-16SDA-41-3-26EDA-41-3-23EDA-41-3-6EDA-41-3-24EDA-41-3-9EDA-41-3-21EDA-41-3-22EDA-41-3-11EDA-41-3-13E Price $324.00324.00324.00324.00324.00324.00324.00324.00324.00358.00358.00435.00435.00435.00435.00435.00465.00489.00489.00614.00658.00658.00666.00666.00465.00465.00465.00465.00482.00506.00574.00658.00658.00Price $305.00305.00305.00305.00305.00305.00305.00305.00305.00337.00337.00411.00411.00411.00411.00411.00468.00468.00468.00589.00625.00625.00637.00637.00443.00443.00443.00443.00443.00488.00549.00624.00624.00Price $305.00305.00305.00305.00305.00305.00305.00305.00305.00337.00337.00411.00411.00411.00411.00411.00468.00468.00468.00589.00625.00625.00637.00637.00443.00443.00443.00443.00443.00488.00549.00624.00624.00Price$455.00455.00455.00455.00455.00455.00455.00455.00455.00487.00487.00561.00561.00561.00561.00561.00618.00618.00618.00739.00775.00775.00787.00593.00593.00593.00593.00593.00638.00699.00774.00774.00。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
KPA1型按钮Array
1 概述
1.1 KPA1型按钮是PROMOS系统中的独立产品，它安装在PROMOS系统中带I/O口的部件上,通过它可以最给控制器一个信息,以控制对应设备的起停。
它适用于煤矿井下的有甲烷和煤尘爆炸性危险的环境中。
其防爆型式为：矿用本质安全型。
防爆标志为ExibI(150℃)。
其关联设备为KDW10型矿用直流稳压电源。
其配接设备为：
KJF21型控制器
KJK3型系列辅助控制器
KCC1型系列智能I/O部件
KTK1型系列扩音电话
1.2 型号及其含义
KP A 1
登记序号
按钮
矿用电气机械元部件及配套组件
1.3 使用环境及工作条件
在下列环境条件下KPA1型按钮应能正常工作：
－工作环境温度：0～40℃；
－平均相对湿度：不超过95％(+25℃)；
－大气压力：（80～106）kPa；
－无剧烈振动和冲击的场所；
－有甲烷和煤尘爆炸性危险的矿井环境中；
－允许有溅水但无破坏绝缘的腐蚀性气体的矿井中。
16-1
2 结构特征与工作原理
2.1 结构特征
KPA1型按钮外壳为铸铁结构，壳体的最小厚度均不小于3mm，其中的零、部件有防锈防蚀处理，紧固件有防松动的措施。
2.2 外壳防护等级为IP54。
2.3 工作原理
通过按下按钮，短接47kΩ的电阻，以返回给使智能I/O部件不同的电压，读出按钮的具体位置，控制器接收相应的信息。
其工作原理见下图
3 技术特征
工作电压：DC 8～12V
工作电流：10mA
4 尺寸、重量
4.1 外形及安装尺寸
外形尺寸：175×110×105mm
安装尺寸：孔距92mm 2-M8×18螺钉
4.2 重量： 4.5kg
5 使用
该按钮只能与PROMOS系统配合使用，当需要设置起、停按钮时，放置此按钮，安装好后，用四芯电缆将其与智能I/O口相联。
6 安装、调整
按钮在下井前应在地面调试合格。
7 保养、维护
7.1 在修理时,仪器、仪表外壳须接地,使用的电烙铁也要接地,应有防静电措施。
7.2 维修时，影响原件绝缘的地方，必须重新涂两遍绝缘漆，以保证绝缘性能。
7.3 维修时应千万小心，最好由供货厂家维修，以确保产品质量。
7.4 因本产品中有本安部件，更换后应保持其本安性能，对于重要的部件应由厂家
进行维修和更换。
16-2
7.5 检修时不得改变本安电路及其关联电路的电气参数及元器件的型号和规格。
8 贮存、运输
8.1 包装后的按钮可以在－10℃～＋40℃，相对湿度不超过90％的环境中贮存一年以上。
8.2 在保养、运输、贮存时，一定要将插口的防尘罩盖好。
8.3 运输时应避免剧烈冲击。
9 随机文件
随机装有：使用说明书
产品合格证
装箱单
16-3。