PC12310NSZ0F资料

Rank mark Anode mark Factory identification mark Date code
1
4
1.2±0.3
1.2±0.3
0.6±0.2
1
4
0.6±0.2
Date code
2.54±0.25 4.58±0.3
4.58±0.3
2
1 2 3 1
3
2
1 2 3 1
4
±0.3
3
2.54±0.25
PC1231xNSZ0F Series
PC1231xNSZ0F Series
DIP 4pin Reinforced Insulation Type, High CMR, Low Input Current Photocoupler
■ Description
PC1231xNSZ0F Series contains an IRED optically coupled to a phototransistor. It is packaged in a 4-pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. CTR is 50% to 400% at input current of 0.5mA.
2.7
±0.5
Epoxy resin
0.5±0.1
0.5±0.1
Product mass : approx. 0.23g 3. Wide Through-Hole Lead-Form [ex. PC1231xNFZ0F]
Rank mark Anode mark
±0.3 ±0.2
Product mass : approx. 0.23g 4. Wide Through-Hole Lead-Form (VDE option) [ex. PC1231xYFZ0F]
4.58±0.3
SHARP mark "S" VDE Indenfication mark
1
4
7.62±0.3
4.58±0.3 0.5TYP. 3.5 3.5±0.5
3.4±0.5
±0.5
Epoxy resin 0.26±0.1 θ θ : 0 to 13˚ θ
2.7
0.26±0.1 θ θ : 0 to 13˚ θ
Rank mark
Product mass : approx. 0.22g 8. Wide SMT Gullwing Lead-Form (VDE option) [ex. PC1231xYUP0F]
Rank mark
Anode mark 1.2±0.3 0.6±0.2
Factory identification mark
1
Sheet No.: D2-A02903EN Date Jun. 30. 2005 © SHARP Corporation
PC1231xNSZ0F Series ■ Internal Connection Diagram
1 1 4 2 3 2 3 4
Anode Cathode Emitter Collector
(*)
■ Features
1. 4pin DIP package 2. Double transfer mold package (Ideal for Flow Soldering) 3. Low input current type (IF=0.5mA) 4. High resistance to noise due to high common rejection voltage (CMR : MIN. 10kV/ms) 5. Reinforced insulation type (Isolation distance : MIN. 0.4mm) 6. Long creepage distance type (wide lead-form type only : MIN. 8mm) 7. High isolation voltage between input and output (Viso(rms) : 5.0kV) 8. Lead-free and RoHS directive compliant
Epoxy resin 0.75
±0.25
0.25
0.5±0.1 0.75
±0.25
10.16
±0.5
Epoxy resin 0.75±0.25 10.16±0.5 12.0MAX
12.0MAX
Product mass : approx. 0.22g
Product mass : approx. 0.22g Plating material : SnCu (Cu : TYP. 2%)
DIN EN60747-5-2 : successor standard of DIN VDE0884
■ Applications
1. Primary to secondary isolation in switch mode power supply 2. Noise suppression in switching circuit 3. Signal transmission between circuits of different potentials and impedances 4. Over voltage detection
Anode mark 1.2±0.3
±0.2
Factory identification mark Date code
Date code
1 4
0.6
1
4
4.58±0.3
2
1 2 3 1
6.5±0.3
3
2
1 2 3 1
4
6.5±0.3
3
2.54±0.25
2.54±0.25
1.0±0.1
1.0
±0.1
7.62±0.3
6.5±0.3 7.62±0.3 0.35±0.25 0.26±0.1
SHARP mark "S"
6.5 4.58±0.3
±0.1
VDE Indenfication mark
7.62±0.3 0.35ቤተ መጻሕፍቲ ባይዱ0.25 3.5±0.5
4.58±0.3 3.5±0.5
0.4 1.0+ −0
0.26
0.4 1.0+ −0
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. PC1231) 2. Approved by BSI, BS-EN60065, file No. 7087, BSEN60950, file No. 7409, (as model No. PC1231) 3. Approved by SEMCO, EN60065, EN60950, file No. 9933036 (as model No. PC1231) 4. Approved by DEMCO, EN60065, EN60950, file No. 99-03814 (as model No. PC1231) 5. Approved by NEMKO, EN60065, EN60950, file No. P99102251 (as model No. PC1231) 6. Approved by FIMKO, EN60065, EN60950, file No. 13986 (as model No. PC1231) 7. Recognized by CSA file No. CA095323 (as model No. PC1231) 8. Approved by VDE, DIN EN60747-5-2 (*) (as an option), file No. 40008087(as model No. PC1231) 9. Package resin : UL flammability grade (94V-0)
3
PC1231xNSZ0F Series Date code (2 digit)
1st digit Year of production A.D Mark 2002 A 2003 B 2004 C 2005 D 2006 E 2007 F 2008 H 2009 J 2010 K 2011 L 2012 M · · N · 2nd digit Month of production Month Mark January 1 February 2 March 3 April 4 May 5 June 6 July 7 August 8 September 9 October O November N December D
Epoxy resin
0 10.0+ −0.5
0.4 1.0+ −0
2.54±0.25
0.4 1.0+ −0
Epoxy resin
0 10.0+ −0.5
2.54±0.25
Product mass : approx. 0.22g 7. Wide SMT Gullwing Lead-Form [ex. PC1231xNUP0F]
2.54
6.5±0.3 7.62
±0.3
1.0
SHARP mark "S"
6.5
±0.3
VDE Indenfication mark
4.58
±0.3
7.62
±0.5
±0.3
4.58
1 2 3 1
±0.3
1 2 3 1
±0.3
4.58
±0.3
3.5
2.7MIN.
2.7MIN.
Epoxy resin 0.26 10.16
Anode mark 1.2±0.3 0.6±0.2
Rank mark Factory identification mark Date code
4.58±0.3
1
4
1 2 3 1
2 3
1 2 3 1
2
4
3
2.54±0.25
6.5±0.3
2.54±0.25
6.5±0.3 4.58±0.3 0.5TYP. 3.5±0.5 7.62±0.3
±0.5 ±0.1
Epoxy resin 0.26
±0.1
0.5
±0.1
10.16
±0.5
0.5
±0.1
Product mass : approx. 0.23g
Product mass : approx. 0.23g
Sheet No.: D2-A02903EN
2
±0.5
3.4±0.5
PC1231xNSZ0F Series
±0.25
4.58±0.3 0.26±0.1 3.5±0.5
SHARP mark "S"
VDE Indenfication mark
7.62±0.3 0.25±0.25 0.26±0.1
4.58±0.3
4.58±0.3 3.5±0.5 0.5±0.1 0.75±0.25
Sheet No.: D2-A02903EN
Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
±0.25
Factory identification mark
±0.3
Rank mark Anode mark
±0.2
Factory identification mark Date code
1.2
1.2
0.6
0.6
1
4
1
4
2.54
Date code
2
3
4.58
2
3
4
±0.1
±0.1
±0.25
1.0
■ Outline Dimensions
1. Through-Hole [ex. PC1231xNSZ0F]
Anode mark 1.2±0.3 0.6±0.2
Rank mark Factory identification mark Date code
(Unit : mm) 2. Through-Hole (VDE option) [ex. PC1231xYSZ0F]
(Unit : mm) 5. SMT Gullwing Lead-Form [ex. PC1231xNIP0F]
Rank mark Anode mark Factory identification mark
6. SMT Gullwing Lead-Form (VDE option) [ex. PC1231xYIP0F]