SN7413N中文资料
7413中文资料
100
VDS VGS RG
RD D.U.T.
10V
Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 %
+-VDD
Fig 10a. Switching Time Test Circuit
VDS 90%
10% VGS
td(on) tr
td(off) tf
Fig 10b. Switching Time Waveforms
tr td(off) tf Ciss
Rise Time Turn-Off Delay Time Fall Time Input Capacitance
––– 8.0 ––– ns ID = 7.2A
––– 35 –––
RG = 6.2Ω
––– 14 –––
VGS = 10V
––– 1670 –––
Benefits
l Low Gate to Drain Charge to Reduce
S
1
Switching Losses
l Fully Characterized Capacitance Including S 2
AA
8
D
7
D
Effective COSS to Simplify Design, (See
Max. 12 9.6 96 2.5 0.02 ± 20 1.0
-55 to + 150
300 (1.6mm from case )
Units
A
W W/°C
V V/ns
°C
Thermal Resistance
Symbol RθJL RθJA
Parameter Junction-to-Drain Lead Junction-to-Ambient
7413-5413中文资料
双4输入与非门（有施密特触发器）
简要说明
13 为具有施密特触发器的两组 4 输入端与非门（正逻辑），共有 54/7413、54/74LS13
两种线路结构型式，其主要电特性的典型值如下：
型号
ΔVt
tPLH
tPHL
PD
54/7413
0.8V
18ns
15ns
85mW
54/74LS13
0.8V
5413/7413 额定 5 5 1.7
0.9
0.8
最大 5.5 5.25 2 1.1
-800 16 16
54LS13/74LS13
最小
额定
最大
4.5
5
5.5
4.75
5
5.25
1.4
1.6
1.9
0.5
0.8
1
0.4
0.8
-400 4 8
单位
V
V V V uA mA
静态特性（TA 为工作环境温度范围）
参数
测 试 条 件【1】
‘13[2]
‘LS13[2]
单
最小 典型 最大 最小 典型 最大 位
VIK输入嵌位电压
VOH输出高电平电压
VOL输出低电平电压 II+正向阀值电压下的 输入电流
Vcc=最小
Iik=-12mA Iik=-18mA
Vcc＝最小VIL＝VIT-= 54
最小 IOH＝最大
74
Vcc=最小，VIH= VIT+= 54
15ns
18ns
18mW
引出端符号 1A－1D 2A－2D 1Y，2Y
输入端 输入端 输出端
74系列芯片功能表汇总
74系列芯片功能表汇总74系列标准数字电路功能表——中文资料名称类别功能7400 TTL 2输入端四与非门7401 TTL 集电极开路2输入端四与非门7402 TTL 2输入端四或非门7403 TTL 集电极开路2输入端四与非门7404 TTL 六反相器7405 TTL 集电极开路六反相器7406 TTL 集电极开路六反相高压驱动器7407 TTL 集电极开路六正相高压驱动器7408 TTL 2输入端四与门7409 TTL 集电极开路2输入端四与门7410 TTL 3输入端3与非门74107 TTL 带清除主从双J-K触发器74109 TTL 带预置清除正触发双J-K触发器7411 TTL 3输入端3与门74112 TTL 带预置清除负触发双J-K触发器7412 TTL 开路输出3输入端三与非门74121 TTL 单稳态多谐振荡器74122 TTL 可再触发单稳态多谐振荡器74123 TTL 双可再触发单稳态多谐振荡器74125 TTL 三态输出高有效四总线缓冲门74126 TTL 三态输出低有效四总线缓冲门7413 TTL 4输入端双与非施密特触发器74132 TTL 2输入端四与非施密特触发器74133 TTL 13输入端与非门74136 TTL 四异或门74138 TTL 3-8线译码器/复工器74139 TTL 双2-4线译码器/复工器7414 TTL 六反相施密特触发器74145 TTL BCD—十进制译码/驱动器7415 TTL 开路输出3输入端三与门74150 TTL 16选1数据选择/多路开关74151 TTL 8选1数据选择器74153 TTL 双4选1数据选择器74154 TTL 4线—16线译码器74155 TTL 图腾柱输出译码器/分配器74156 TTL 开路输出译码器/分配器74157 TTL 同相输出四2选1数据选择器74158 TTL 反相输出四2选1数据选择器7416 TTL 开路输出六反相缓冲/驱动器74160 TTL 可预置BCD异步清除计数器74161 TTL 可予制四位二进制异步清除计数器74162 TTL 可预置BCD同步清除计数器74163 TTL 可予制四位二进制同步清除计数器74164 TTL 八位串行入/并行输出移位寄存器74165 TTL 八位并行入/串行输出移位寄存器74166 TTL 八位并入/串出移位寄存器74169 TTL 二进制四位加/减同步计数器7417 TTL 开路输出六同相缓冲/驱动器74170 TTL 开路输出4×4寄存器堆74173 TTL 三态输出四位D型寄存器74174 TTL 带公共时钟和复位六D触发器74175 TTL 带公共时钟和复位四D触发器74180 TTL 9位奇数/偶数发生器/校验器74181 TTL 算术逻辑单元/函数发生器74185 TTL 二进制—BCD代码转换器74190 TTL BCD同步加/减计数器74191 TTL 二进制同步可逆计数器74192 TTL 可预置BCD双时钟可逆计数器74193 TTL 可预置四位二进制双时钟可逆计数器74194 TTL 四位双向通用移位寄存器74195 TTL 四位并行通道移位寄存器74196 TTL 十进制/二-十进制可预置计数锁存器74197 TTL 二进制可预置锁存器/计数器7420 TTL 4输入端双与非门7421 TTL 4输入端双与门7422 TTL 开路输出4输入端双与非门74221 TTL 双/单稳态多谐振荡器74240 TTL 八反相三态缓冲器/线驱动器74241 TTL 八同相三态缓冲器/线驱动器74243 TTL 四同相三态总线收发器74244 TTL 八同相三态缓冲器/线驱动器74245 TTL 八同相三态总线收发器74247 TTL BCD—7段15V输出译码/驱动器74248 TTL BCD—7段译码/升压输出驱动器74249 TTL BCD—7段译码/开路输出驱动器74251 TTL 三态输出8选1数据选择器/复工器74253 TTL 三态输出双4选1数据选择器/复工器74256 TTL 双四位可寻址锁存器74257 TTL 三态原码四2选1数据选择器/复工器74258 TTL 三态反码四2选1数据选择器/复工器74259 TTL 八位可寻址锁存器/3-8线译码器7426 TTL 2输入端高压接口四与非门74260 TTL 5输入端双或非门74266 TTL 2输入端四异或非门7427 TTL 3输入端三或非门74273 TTL 带公共时钟复位八D触发器74279 TTL 四图腾柱输出S-R锁存器7428 TTL 2输入端四或非门缓冲器74283 TTL 4位二进制全加器74290 TTL 二/五分频十进制计数器74293 TTL 二/八分频四位二进制计数器74295 TTL 四位双向通用移位寄存器74298 TTL 四2输入多路带存贮开关74299 TTL 三态输出八位通用移位寄存器7430 TTL 8输入端与非门7432 TTL 2输入端四或门74322 TTL 带符号扩展端八位移位寄存器74323 TTL 三态输出八位双向移位/存贮寄存器7433 TTL 开路输出2输入端四或非缓冲器74347 TTL BCD—7段译码器/驱动器74352 TTL 双4选1数据选择器/复工器74353 TTL 三态输出双4选1数据选择器/复工器74365 TTL 门使能输入三态输出六同相线驱动器74365 TTL 门使能输入三态输出六同相线驱动器74366 TTL 门使能输入三态输出六反相线驱动器74367 TTL 4/2线使能输入三态六同相线驱动器74368 TTL 4/2线使能输入三态六反相线驱动器7437 TTL 开路输出2输入端四与非缓冲器74373 TTL 三态同相八D锁存器74374 TTL 三态反相八D锁存器74375 TTL 4位双稳态锁存器74377 TTL 单边输出公共使能八D锁存器74378 TTL 单边输出公共使能六D锁存器74379 TTL 双边输出公共使能四D锁存器7438 TTL 开路输出2输入端四与非缓冲器74380 TTL 多功能八进制寄存器7439 TTL 开路输出2输入端四与非缓冲器74390 TTL 双十进制计数器74393 TTL 双四位二进制计数器7440 TTL 4输入端双与非缓冲器7442 TTL BCD—十进制代码转换器74352 TTL 双4选1数据选择器/复工器74353 TTL 三态输出双4选1数据选择器/复工器74365 TTL 门使能输入三态输出六同相线驱动器74366 TTL 门使能输入三态输出六反相线驱动器74367 TTL 4/2线使能输入三态六同相线驱动器74368 TTL 4/2线使能输入三态六反相线驱动器7437 TTL 开路输出2输入端四与非缓冲器74373 TTL 三态同相八D锁存器74374 TTL 三态反相八D锁存器74375 TTL 4位双稳态锁存器74377 TTL 单边输出公共使能八D锁存器74378 TTL 单边输出公共使能六D锁存器74379 TTL 双边输出公共使能四D锁存器7438 TTL 开路输出2输入端四与非缓冲器74380 TTL 多功能八进制寄存器7439 TTL 开路输出2输入端四与非缓冲器74390 TTL 双十进制计数器74393 TTL 双四位二进制计数器7440 TTL 4输入端双与非缓冲器7442 TTL BCD—十进制代码转换器74447 TTL BCD—7段译码器/驱动器7445 TTL BCD—十进制代码转换/驱动器74450 TTL 16:1多路转接复用器多工器74451 TTL 双8:1多路转接复用器多工器74453 TTL 四4:1多路转接复用器多工器7446 TTL BCD—7段低有效译码/驱动器74460 TTL 十位比较器74461 TTL 八进制计数器74465 TTL 三态同相2与使能端八总线缓冲器74466 TTL 三态反相2与使能八总线缓冲器74467 TTL 三态同相2使能端八总线缓冲器74468 TTL 三态反相2使能端八总线缓冲器74469 TTL 八位双向计数器7447 TTL BCD—7段高有效译码/驱动器7448 TTL BCD—7段译码器/内部上拉输出驱动74490 TTL 双十进制计数器7449174498 TTL 八进制移位寄存器7450 TTL 2-3/2-2输入端双与或非门74502 TTL 八位逐次逼近寄存器74503 TTL 八位逐次逼近寄存器7451 TTL 2-3/2-2输入端双与或非门74533 TTL 三态反相八D锁存器74534 TTL 三态反相八D锁存器7454 TTL 四路输入与或非门74540 TTL 八位三态反相输出总线缓冲器7455 TTL 4输入端二路输入与或非门74563 TTL 八位三态反相输出触发器74564 TTL 八位三态反相输出D触发器74573 TTL 八位三态输出触发器74574 TTL 八位三态输出D触发器74645 TTL 三态输出八同相总线传送接收器74670 TTL 三态输出4×4寄存器堆7473 TTL 带清除负触发双J-K触发器7474 TTL 带置位复位正触发双D触发器7476 TTL 带预置清除双J-K触发器7483 TTL 四位二进制快速进位全加器7485 TTL 四位数字比较器7486 TTL 2输入端四异或门7490 TTL 可二/五分频十进制计数器7493 TTL 可二/八分频二进制计数器7495 TTL 四位并行输入\输出移位寄存器7497 TTL 6位同步二进制乘法器常用74系列标准数字电路的中文名称资料器件代号器件名称74 74LS 74HC00 四2输入端与非门√√√01 四2输入端与非门(OC) √√02 四2输入端或非门√√√03 四2输入端与非门(OC) √√04 六反相器√√√05 六反相器(OC) √√06 六高压输出反相器(OC,30V) √√07 六高压输出缓冲,驱动器(OC,30V) √√√08 四2输入端与门√√√09 四2输入端与门(OC) √√√10 三3输入端与非门√√√11 三3输入端与门√√12 三3输入端与非门(OC) √√√13 双4输入端与非门√√√14 六反相器√√√15 三3输入端与门√√16 六高压输出反相器(OC,15V) √17 六高压输出缓冲,驱动器(OC,15V) √20 双4输入端与非门√√√21 双4输入端与门√√√22 双4输入端与非门(OC) √√25 双4输入端或非门(有选通端) √√√26 四2输入端高压输出与非缓冲器√√√27 三3输入端或非门√√√28 四2输入端或非缓冲器√√√30 8输入端与非门√√√32 四2输入端或门√√√33 四2输入端或非缓冲器(OC) √√37 四2输入端与非缓冲器√√38 四2输入端与非缓冲器(OC) √√40 双4输入端与非缓冲器√√√42 4线-10线译码器(BCD输入) √√43 4线-10线译码器(余3码输入) √44 4线-10线译码器(余3葛莱码输入) √48 4线-7段译码器√49 4线-7段译码器√50 双2路2-2输入与或非门√√√√√√51 2路3-3输入,2路2-2输入与或非门52 4路2-3-2-2输入与或门√53 4路2-2-2-2输入与或非门√54 4路2-3-3-2输入与或非门√√55 2路4-4输入与或非门√60 双4输入与扩展器√√61 三3输入与扩展器√62 4路2-3-3-2输入与或扩展器√64 4路4-2-3-2输入与或非门√65 4路4-2-3-2输入与或非门(OC) √70 与门输入J-K触发器√71 与或门输入J-K触发器√72 与门输入J-K触发器√74 双上升沿D型触发器√√78 双D型触发器√√85 四位数值比较器√86 四2输入端异或门√√√87 4位二进制原码/反码√95 4位移位寄存器√101 与或门输入J-K触发器√102 与门输入J-K触发器√107 双主-从J-K触发器√108 双主-从J-K触发器√109 双主-从J-K触发器√110 与门输入J-K触发器√111 双主-从J-K触发器√√112 双下降沿J-K触发器√。
SN74F373N3中文资料
PACKAGING INFORMATIONOrderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)5962-9758901Q2A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type 5962-9758901QRA ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type 5962-9758901QSA ACTIVE CFP W 201TBD A42N /A for Pkg Type JM38510/34601B2A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg TypeJM38510/34601BRA ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type JM38510/34601BSAACTIVE CFPW 201TBD A42N /A for Pkg Type SN54F373J ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type SN74F373DBLE OBSOLETE SSOP DB 20TBDCall TI Call TISN74F373DBR ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373DBRE4ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373DBRG4ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373DW ACTIVE SOIC DW 2025Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373DWG4ACTIVE SOIC DW 2025Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373DWR ACTIVE SOIC DW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373DWRG4ACTIVE SOIC DW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373N ACTIVE PDIP N 2020Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74F373N3OBSOLETE PDIP N 20TBD Call TI Call TISN74F373NE4ACTIVE PDIP N 2020Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74F373NSR ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373NSRE4ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74F373NSRG4ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIMSNJ54F373FK ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type SNJ54F373J ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type SNJ54F373WACTIVECFPW201TBDA42N /A for Pkg Type(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements4-Jun-2007for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.4-Jun-2007TAPE AND REELINFORMATION16-Jul-2007DevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant SN74F373DBR DB 20MLA 330168.27.5 2.51216Q1SN74F373DWR DW 20MLA 3302410.813.0 2.71224Q1SN74F373NSRNS20MLA330248.213.02.51224Q1TAPE AND REEL BOX INFORMATIONDevice Package Pins Site Length (mm)Width (mm)Height (mm)SN74F373DBR DB 20MLA 346.0346.033.0SN74F373DWR DW 20MLA 333.2333.231.75SN74F373NSRNS20MLA333.2333.231.7516-Jul-200716-Jul-2007IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityRFID Telephony /telephonyLow Power /lpw Video&Imaging /videoWirelessWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。
SN74LS14N3中文资料
InputV T OutputPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9665801Q2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 5962-9665801QCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9665801QDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC 5962-9665801VCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9665801VDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC JM38510/31302BCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SN5414J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SN54LS14J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NCSN7414D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DE4ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DRE4ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN7414N3OBSOLETE PDIP N14TBD Call TI Call TISN7414NSR ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414NSRE4ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DBR ACTIVE SSOP DB142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DBRE4ACTIVE SSOP DB142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS14N3OBSOLETE PDIP N14TBD Call TI Call TISN74LS14NE4ACTIVE PDIP N1425TBD Call TI Call TISN74LS14NSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ5414J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NCSNJ5414W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC SNJ54LS14FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS14J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SNJ54LS14W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN74148中文资料
PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)78027012A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC7802701EA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC7802701FA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC JM38510/36001B2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC JM38510/36001BEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC JM38510/36001BFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC SN54148J OBSOLETE CDIP J16TBD Call TI Call TISN54LS148J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCSN74147N OBSOLETE PDIP N16TBD Call TI Call TISN74148J OBSOLETE CDIP J16TBD Call TI Call TISN74148N OBSOLETE PDIP N16TBD Call TI Call TISN74148N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS147DR OBSOLETE SOIC D16TBD Call TI Call TISN74LS147N OBSOLETE PDIP N16TBD Call TI Call TISN74LS148D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS148DE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS148DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS148DRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74LS148J OBSOLETE CDIP J16TBD Call TI Call TISN74LS148N ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS148N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS148NE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74LS148NSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS148NSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ54148J OBSOLETE CDIP J16TBD Call TI Call TISNJ54148W OBSOLETE CFP W16TBD Call TI Call TISNJ54LS148FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS148J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SNJ54LS148W ACTIVE CFP W161TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check/productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN74LS273N中文资料
元器件交易网IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinueany product or service without notice, and advise customers to obtain the latest version of relevant informationto verify, before placing orders, that information being relied on is current and complete. All products are soldsubject to the terms and conditions of sale supplied at the time of order acknowledgement, including thosepertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extentTI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarilyperformed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OFDEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICALAPPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHERCRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TOBE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operatingsafeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or representthat any license, either express or implied, is granted under any patent right, copyright, mask work right, or otherintellectual property right of TI covering or relating to any combination, machine, or process in which suchsemiconductor products or services might be or are used. TI’s publication of information regarding any thirdparty’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1998, Texas Instruments Incorporated。
SN74LS132中文资料
LOW POWER SCHOTTKYDevice Package Shipping SN74LS132N 14 Pin DIP 2000 Units/Box SN74LS132D14 PinSOIC D SUFFIX CASE 751A2500/T ape & ReelPLASTIC N SUFFIX CASE 646141141PACKAGE DIMENSIONSNOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETER.3.DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION.4.MAXIMUM MOLD PROTRUSION 0.15 (0.006)PER SIDE.5.DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBARPROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION.DIM MIN MAX MIN MAX INCHES MILLIMETERS A 8.558.750.3370.344B 3.80 4.000.1500.157C 1.35 1.750.0540.068D 0.350.490.0140.019F 0.40 1.250.0160.049G 1.27 BSC 0.050 BSC J 0.190.250.0080.009K 0.100.250.0040.009M 0 7 0 7 P 5.80 6.200.2280.244R0.250.500.0100.019____D SUFFIXPLASTIC SOIC PACKAGEON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.PUBLICATION ORDERING INFORMATIONASIA/PACIFIC : LDC for ON Semiconductor – Asia SupportPhone :303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)Toll Free from Hong Kong 800–4422–3781Email : ONlit–asia@JAPAN : ON Semiconductor, Japan Customer Focus Center4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–8549Phone : 81–3–5487–8345Email : r14153@Fax Response Line :303–675–2167。
SN7414D中文资料
InputV T OutputPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9665801Q2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 5962-9665801QCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9665801QDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC 5962-9665801VCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9665801VDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC JM38510/31302BCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SN5414J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SN54LS14J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NCSN7414D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DE4ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DRE4ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN7414N3OBSOLETE PDIP N14TBD Call TI Call TISN7414NSR ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414NSRE4ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DBR ACTIVE SSOP DB142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DBRE4ACTIVE SSOP DB142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS14N3OBSOLETE PDIP N14TBD Call TI Call TISN74LS14NE4ACTIVE PDIP N1425TBD Call TI Call TISN74LS14NSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ5414J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NCSNJ5414W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC SNJ54LS14FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS14J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SNJ54LS14W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN74192N中文资料
Copyright © 1988, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9558401QEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC 5962-9558401QFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC 5962-9558401QFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC 76006012A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 76006012A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 7600601EA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC 7600601EA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC 7600601FA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC 7600601FA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/01309BEA OBSOLETE CDIP J16TBD Call TI Call TIJM38510/01309BEA OBSOLETE CDIP J16TBD Call TI Call TIJM38510/31508B2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NCJM38510/31508B2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NCJM38510/31508BEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508BEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508BFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/31508BFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/31508SEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508SEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508SFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/31508SFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC SN54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN54193J OBSOLETE CDIP J16TBD Call TI Call TISN54193J OBSOLETE CDIP J16TBD Call TI Call TISN54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN74192N OBSOLETE PDIP N16TBD Call TI Call TISN74192N OBSOLETE PDIP N16TBD Call TI Call TISN74193N OBSOLETE PDIP N16TBD Call TI Call TISN74193N OBSOLETE PDIP N16TBD Call TI Call TISN74193N3OBSOLETE PDIP N16TBD Call TI Call TISN74193N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS192D OBSOLETE SOIC D16TBD Call TI Call TISN74LS192D OBSOLETE SOIC D16TBD Call TI Call TISN74LS192N OBSOLETE PDIP N16TBD Call TI Call TISN74LS192N OBSOLETE PDIP N16TBD Call TI Call TISN74LS193D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAROrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN74LS193DE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN74LS193J OBSOLETE CDIP J16TBD Call TI Call TISN74LS193J OBSOLETE CDIP J16TBD Call TI Call TISN74LS193N ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74LS193N ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS193N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS193N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS193NE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74LS193NE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74LS193NSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS193NSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS193NSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS193NSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCSNJ54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCSNJ54192W ACTIVE CFP W161TBD Call TI Level-NC-NC-NCSNJ54192W ACTIVE CFP W161TBD Call TI Level-NC-NC-NCSNJ54193J OBSOLETE CDIP J16TBD Call TI Call TISNJ54193J OBSOLETE CDIP J16TBD Call TI Call TISNJ54193W OBSOLETE CFP W16TBD Call TI Call TISNJ54193W OBSOLETE CFP W16TBD Call TI Call TISNJ54LS193FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS193FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SNJ54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SNJ54LS193W ACTIVE CFP W161TBD Call TI Level-NC-NC-NC SNJ54LS193W ACTIVE CFP W161TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part ina new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SA741CN资料
DESCRIPTION 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Plastic Dual In-Line Package (DIP) 8-Pin Ceramic Dual In-Line Package (CERDIP) 8-Pin Ceramic Dual In-Line Package (CERDIP) 8-Pin Small Outline (SO) Package
1994 Aug 31
2
元器件交易网
Philips Semiconductors Product specification
General purpose operational amplifier
µA741/µA741C/SA741C
DC ELECTRICAL CHARACTERISTICS
AC ELECTRICAL CHARACTERISTICS
TA=25°C, VS = ±15V, unless otherwise specified. SYMBOL RIN CIN PARAMETER Parallel input resistance Parallel input capacitance Unity gain crossover frequency Transient response unity gain tR SR Rise time Overshoot Slew rate C≤100pF, RL≥2kΩ, VIN=±10V TEST CONDITIONS Open-loop, f=20Hz Open-loop, f=20Hz Open-loop VIN=20mV, RL=2kΩ, CL≤100pF 0.3 5.0 0.5 µs % V/µs µA741, µA741C Min 0.3 1.4 1.0 Typ Max UNIT MΩ pF MHz
SN74132N中文资料
Copyright © 1988, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.POST OFFICE BOX 655303 • DALLAS, TEXAS 75265元器件交易网IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinueany product or service without notice, and advise customers to obtain the latest version of relevant informationto verify, before placing orders, that information being relied on is current and complete. All products are soldsubject to the terms and conditions of sale supplied at the time of order acknowledgement, including thosepertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extentTI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarilyperformed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OFDEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICALAPPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHERCRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TOBE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operatingsafeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or representthat any license, either express or implied, is granted under any patent right, copyright, mask work right, or otherintellectual property right of TI covering or relating to any combination, machine, or process in which suchsemiconductor products or services might be or are used. TI’s publication of information regarding any thirdparty’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1999, Texas Instruments Incorporated。
各种芯片代号及作用
74系列芯片功能大全输入端四与非门集电极开路2输入端四与非门输入端四或非门集电极开路2输入端四与非门六反相器集电极开路六反相器集电极开路六反相高压驱动器集电极开路六正相高压驱动器输入端四与门集电极开路2输入端四与门输入端3与非门带清除主从双J-K触发器带预置清除正触发双J-K触发器输入端3与门带预置清除负触发双J-K触发器开路输出3输入端三与非门单稳态多谐振荡器可再触发单稳态多谐振荡器双可再触发单稳态多谐振荡器三态输出高有效四总线缓冲门三态输出低有效四总线缓冲门输入端双与非施密特触发器输入端四与非施密特触发器输入端与非门四异或门线译码器/复工器双2-4线译码器/复工器六反相施密特触发器—十进制译码/驱动器开路输出3输入端三与门选1数据选择/多路开关选1数据选择器双4选1数据选择器线—16线译码器图腾柱输出译码器/分配器开路输出译码器/分配器同相输出四2选1数据选择器反相输出四2选1数据选择器开路输出六反相缓冲/驱动器可预置BCD异步清除计数器可预置BCD同步清除计数器可予制四位二进制同步清除计数器八位串行入/并行输出移位寄存器八位并行入/串行输出移位寄存器八位并入/串出移位寄存器二进制四位加/减同步计数器开路输出六同相缓冲/驱动器开路输出4×4寄存器堆三态输出四位D型寄存器带公共时钟和复位六D触发器带公共时钟和复位四D触发器位奇数/偶数发生器/校验器算术逻辑单元/函数发生器二进制—BCD代码转换器同步加/减计数器二进制同步可逆计数器可预置BCD双时钟可逆计数器可预置四位二进制双时钟可逆计数器四位双向通用移位寄存器四位并行通道移位寄存器十进制/二-十进制可预置计数锁存器二进制可预置锁存器/计数器输入端双与非门输入端双与门开路输出4输入端双与非门双/单稳态多谐振荡器74240 TTL 八反相三态缓冲器/线驱动器74241 TTL 八同相三态缓冲器/线驱动器74243 TTL 四同相三态总线收发器74244 TTL 八同相三态缓冲器/线驱动器74245 TTL 八同相三态总线收发器—7段译码/升压输出驱动器—7段译码/开路输出驱动器三态输出8选1数据选择器/复工器74253 TTL 三态输出双4选1数据选择器/复工器74256 TTL 双四位可寻址锁存器74257 TTL 三态原码四2选1数据选择器/复工器74258 TTL 三态反码四2选1数据选择器/复工器输入端高压接口四与非门输入端双或非门输入端四异或非门输入端三或非门带公共时钟复位八D触发器四图腾柱输出S-R锁存器输入端四或非门缓冲器位二进制全加器二/五分频十进制计数器74293 TTL 二/八分频四位二进制计数器74295 TTL 四位双向通用移位寄存器四2输入多路带存贮开关74299 TTL 三态输出八位通用移位寄存器输入端与非门输入端四或门带符号扩展端八位移位寄存器三态输出八位双向移位/存贮寄存器开路输出2输入端四或非缓冲器74347 TTL BCD—7段译码器/驱动器74352 TTL 双4选1数据选择器/复工器74353 TTL 三态输出双4选1数据选择器/复工器门使能输入三态输出六同相线驱动器门使能输入三态输出六同相线驱动器门使能输入三态输出六反相线驱动器线使能输入三态六同相线驱动器线使能输入三态六反相线驱动器开路输出2输入端四与非缓冲器三态同相八D锁存器三态反相八D锁存器位双稳态锁存器单边输出公共使能八D锁存器单边输出公共使能六D锁存器双边输出公共使能四D锁存器开路输出2输入端四与非缓冲器多功能八进制寄存器开路输出2输入端四与非缓冲器双十进制计数器双四位二进制计数器输入端双与非缓冲器—十进制代码转换器74352 TTL 双4选1数据选择器/复工器74353 TTL 三态输出双4选1数据选择器/复工器门使能输入三态输出六同相线驱动器门使能输入三态输出六反相线驱动器线使能输入三态六同相线驱动器线使能输入三态六反相线驱动器开路输出2输入端四与非缓冲器三态反相八D锁存器位双稳态锁存器单边输出公共使能八D锁存器单边输出公共使能六D锁存器双边输出公共使能四D锁存器开路输出2输入端四与非缓冲器多功能八进制寄存器开路输出2输入端四与非缓冲器双十进制计数器双四位二进制计数器输入端双与非缓冲器—十进制代码转换器74447 TTL BCD—7段译码器/驱动器—十进制代码转换/驱动器多路转接复用器多工器双8:1多路转接复用器多工器四4:1多路转接复用器多工器—7段低有效译码/驱动器十位比较器八进制计数器三态同相2与使能端八总线缓冲器三态反相2与使能八总线缓冲器三态同相2使能端八总线缓冲器三态反相2使能端八总线缓冲器八位双向计数器—7段高有效译码/驱动器—7段译码器/内部上拉输出驱动双十进制计数器74491 TTL 十位计数器74498 TTL 八进制移位寄存器输入端双与或非门八位逐次逼近寄存器八位逐次逼近寄存器输入端双与或非门74533 TTL 三态反相八D锁存器三态反相八D锁存器四路输入与或非门八位三态反相输出总线缓冲器输入端二路输入与或非门74563 TTL 八位三态反相输出触发器八位三态反相输出D触发器74573 TTL 八位三态输出触发器八位三态输出D触发器74645 TTL 三态输出八同相总线传送接收器带清除负触发双J-K触发器带置位复位正触发双D触发器带预置清除双J-K触发器四位二进制快速进位全加器四位数字比较器输入端四异或门可二/五分频十进制计数器可二/八分频二进制计数器四位并行输入\输出移位寄存器位同步二进制乘法器CD系列芯片功能大全3输入端或非门+单非门TI2输入端或非门FSC[DATA]/TI[DA TA]/HIT4输入端或非门TI[DATA]/NSC位串入/串出移位寄存器TI[DA TA]/NSCFSC[DATA](PDF-51K)/NSC位超前进位全加器NSC/变换器TI[DATA](PDF-305K)/变换器FSC[DATA](PDF-50K)/TI[DA TA]2输入端与非门FSC[DATA](PDF-106K)/HIT/TI[DATA]4输入端与非门TI[DATA]/NSC-从D型触发器FSC[DATA](PDF-76K)/NSC/TOS位串入/并入-串出移位寄存器FSC[DATA](PDF-69K)/NSC4位串入/并出移位寄存器FSC[DATA](PDF-58K)/TIFSC[DATA](PDF-96K)/TI/分配器FSC[DATA](PDF-79K)/TI/MOT1/N计数器TI[DATA]/NSC/MOTFSC[DA TA](PDF-61K)/PHI级串行二进制计数/分频器FSC[DATA](PDF-84K)位串入/并入-串出移位寄存器FSC[DATA](PDF-72K)/PHI/NSC/分配器FSC[DATA](PDF-79K)/NSC/MOT3输入端与非门FSC[DATA](PDF-51K)/MOT/TI[DATA]级二进制串行计数/分频器FSC[DATA](PDF-56K)/MOT/TI3输入端或非门TI[DATA]/NSC/MOT/7段译码器TI[DATA]/NSC/MOTJ-K触发器FSC[DATA](PDF-60K)/MOT/TI码十进制译码器FSC[DATA](PDF-56K)/MOT/TIFSC[DATA](PDF-96K)/MOT/TIFSC[DATA](PDF-48K)/MOT/TI/GOL位串入/串出移位存储器TI[DA TA]/NSC/MOT/7段译码器TI[DATA]/NSC位通用总线寄存器TI[DATA]/NSC/MOT位并入/串入-并出/串出移位寄存TI[DATA]/NSC/MOTNSC/TI级二进制串行计数/分频器FSC[DATA](PDF-84K)/MOT/TI /反相缓冲器TI[DATA]/NSC/MOTD型触发器TI[DATA]/NSC/MOTR-S锁存触发器("1"触发) FSC[DA TA](PDF-70K)/MOT/TI R-S锁存触发器("0"触发) FSC[DA TA](PDF-70K)/MOT/TIFSC[DA TA](PDF-175K)/MOT/TI/PHI/单稳态多谐振荡器FSC[DA TA](PDF-90K)/MOT/TI输入端可扩展多功能门TI[DATA]/NSC/HIT/变换器FSC[DATA](PDF-65K)/HIT/TI/变换器FSC[DATA](PDF-65K)/MOT/TIFSC[DA TA](PDF-126K)/MOT/TI[DATA]4选1模拟开关FSC[DATA](PDF-126K)/MOT/TI[DATA]FSC[DATA](PDF-126K)/MOT/TI[DATA]TI[DA TA]/NSC/HIT段译码/液晶驱动器TI[DA TA]/NSC/HITTI[DA TA]/NSC/HIT分频计数器TI[DA TA]/NSC级二进制串行计数/分频器FSC[DATA](PDF-84K)/TI/MOTTI[DA TA]/NSC/HITFSC[DATA](PDF-100K)/NSC/TI/MOT选1模拟开关TI[DA TA]/NSC/与门NSC/HIT/TIFSC[DATA](PDF-81K)/HIT/TIFSC[DATA](PDF-55K)/HIT/TI[DATA]2输入端或门FSC[DA TA](PDF-99K)/TI[DATA]4输入端或门TI[DA TA]/NSC3输入端与门TI[DA TA]/NSC3输入端或门TI[DA TA]/NSCD寄存器TI[DA TA]2输入端异或非门TI[DA TA]/HIT输入端或非门/或门TI[DA TA]2输入端与门FSC[DA TA](PDF-99K)/HIT/TI[DATA]4输入端与门TI[DA TA]/NSC/HIT2路2输入端与或非门TI[DA TA]2输入端可扩展与或非门TI[DATA]TI[DATA]2输入端施密特触发器FSC[DA TA](PDF-92K)/MOT/ST位移位存储总线寄存器FSC[DATA](PDF-70K)/TI/PHI输入端J-K触发器TI[DA TA]NSC/MOT/TI位可寻址锁存器FSC[DATA](PDF-55K)/MOT/ST 位左/右移位寄存器位奇偶较验器位可预置同步BCD减法计数器TI[DATA]位可预置同步二进制减法计数器TI[DA TA]位双向移位寄存器先入先出FI-FD寄存器六施密特触发器FSC[DATA](PDF-69K)/TI双2输入端与非缓冲/驱动器TI[DA TA]/HAR字×4位多通道寄存器四低-高电平位移器TI[DA TA]十进制加/减,计数,锁存,译码驱动TI[DATA]/ST线编码器NSC\MOT可预置BCD加计数器NSC\MOT可预置4位二进制加计数器NSC\MOT加法计数器NSC\MOT位二进制同步计数器NSC\MOT六锁存D型触发器FSC[DA TA](PDF-63K)/TI/MOT四D型触发器FSC[DA TA](PDF-63K)/TI/MOT位算术逻辑单元/函数发生器超前位发生器可预置BCD加/减计数器(双时钟) FSC[DA TA](PDF-77K)/TI 可预置4位二进制加/减计数器FSC[DA TA](PDF-77K)/TI 位并入/串入-并出/串出移位寄存NSC\MOT位并入/串入-并出/串出移位寄存NSC\MOT4多端口寄存器输入端双与门及2输入端或非门/缓冲器TI[DA TA]TI[DATA]/FSC[DA TA]TI[DATA]2输入可扩展或非门4位锁存D型触发器TI[DATA]BCD码加/减计数器TI[DATA]锁存,7段译码,驱动器TI[DA TA]/FSC[DATA]/MOTTI[DA TA]/FSC[DATA]/MOT锁存,7段译码,驱动器(消隐) MOT位锁存,4线-16线译码器TI[DATA]/FSC[DA TA]位锁存,4线-16线译码器TI[DATA]/FSC[DA TA]4位二进制加/减计数器TI[DA TA]BCD同步加计数器TI[DA TA]/NSC/FSC/PHI4位二进制同步加计数器TI[DATA]/NSC/FSC/PHI级分频器TI[DA TA]BCD同步1/N计数器TI[DATA]/MOT4位二进制同步1/N计数器比例乘法器TI[DATA]FSC[DA TA]/单八路模拟开关5输入端优势逻辑门位奇偶校验器位优先编码器TI[DATA]TI[DATA]FSC[DATA]/MOT/PHI/计时器TI[DA TA]/FSC[DATA]七段锁存译码,驱动器TI[DA TA]/NSC/FSC/MOT七段锁存译码,驱动器七段译码/大电流驱动器2通道模拟开关BCD计数器/分离器TI[DA TA]/分离器TI[DA TA]八段译码器加法器求补器/比较器NSC/MOT位数值比较器TI[DA TA]/NSC/FSC/MOT位可寻址锁存器4×1交叉点开关HARSN系列芯片功能大全2输入端与非门(OC)2输入端或非门TI[DATA]2输入端与非门(OC) TI[DATA]TI[DATA](OC) TI[DATA](OC,30V) TI[DA TA],驱动器(OC,30V) TI[DATA] 2输入端与门TI[DA TA]2输入端与门(OC) TI[DATA]3输入端与非门TI[DATA]3输入端与非门(OC) TI[DATA]4输入端与非门TI[DATA]TI[DATA]/驱动器TI[DA TA]/驱动器(OC,15V) TI[DATA] 4输入端与非门TI[DATA]4输入端与非门(OC) TI[DATA]SN7423 可扩展双4输入端或非门TI[DATA]4输入端或非门TI[DATA]2输入端高压输出与非缓冲器TI[DATA] SN7427 三3输入端或非门TI[DA TA]2输入端或非缓冲器TI[DATA]输入端与非门TI[DA TA]2输入端或门TI[DA TA]SN7433 四2输入端或非缓冲器(OC) TI[DATA]2输入端与非缓冲器TI[DATA]2输入端与非缓冲器(OC) TI[DA TA]SN7439 四2输入端与非缓冲器(OC) TI[DATA]4输入端与非缓冲器TI[DATA]十进制译码/驱动器TI[DA TA]SN7446A BCD-TO-七段译码/驱动器TI[DA TA]七段译码/驱动器TI[DATA]七段译码/驱动器TI[DA TA]3-3输入,2路2-2输入与或非门TI[DA TA]3-3输入,2路2-2输入与或非门TI[DA TA]2-2-2-2输入与或非门TI[DA TA]2-2-3-2输入与或非门TI[DA TA]SN7470 与门输入上升沿J-K型触发器TI[DATA]J-K型触发器TI[DATA]J-K型触发器TI[DATA]D型触发器TI[DA TA]SN7475 双异或门TI[DA TA]J-K型触发器TI[DATA]位数值比较器TI[DA TA]/反码,0/1单元TI[DA TA]SN7490A 异步十进制计数器TI[DA TA]SN7491A 8位移位寄存器TI[DATA]SN7492A ASYNCHRONOUS DIVIDE-BY-TWELVE COUNTERS TI[DATA] SN7493A ASYNCHRONOUS 4-BIT BINARY COUNTERS TI[DATA]TI[DATA]SN7495A 4位移位寄存器TI[DATA]位同步二进制乘法器TI[DATA]双主-从J-K触发器TI[DA TA]双J-K触发器TI[DA TA]SN74111 双主-从J-K触发器TI[DA TA]4位锁存器TI[DATA]双脉冲同步驱动器TI[DA TA]TA]TA] 可重触发双稳态触发器TI[DA TA]四总线缓冲器TI[DA TA]四总线缓冲器TI[DA TA]可再触发单稳态振荡器TI[DA TA]四2输入端与非门TI[DA TA]TES TI[DA TA]计数，七段LED 驱动器TI[DATA]七段译码驱动器TI[DATA]线-4线优先编码器TI[DATA]线-3线优先编码器TI[DA TA]选1数据选择器TI[DATA]选1数据选择器TI[DA TA]4选1数据选择器TI[DA TA]线-16线译码器TI[DATA]2线-4线译码器TI[DATA]SN74156 双2线-4线译码器OC TI[DATA]2选1数据选择器TI[DA TA]线-16线译码器(OC) TI[DATA]十进制同步计数器TI[DA TA]位二进制同步计数器TI[DATA]十进制同步计数器TI[DA TA]位二进制同步计数器TI[DATA]位移位寄存器TI[DATA]位移位寄存器TI[DATA]位移位寄存器TI[DATA]TE MULTIPLIERTA]六上升沿D型发器TI[DA TA]四上升沿D型触发器TI[DATA]TA]TA]SN74190 十进制加/减计数器TI[DA TA]位二进制加/减计数器TI[DATA]/减计数器(双时钟)位二进制加/减计数器(双时钟)位双向移位寄存器TI[DATA]TI[DATA]TI[DATA]TI[DATA]TI[DATA]SN74199 移位寄存器TI[DA TA]双单稳态触器TI[DA TA]SN74246 BCD7段译码/驱动器TI[DATA]SN74247 4线-7段译码/高压输出驱动器TI[DATA]SN74248 4线-7段译码/驱动器TI[DATA]选1数据选择器TI[DATA]位可寻址锁存器TI[DATA]D触发器(公共时钟,单边输出) TI[DATA]TA]位二进制超前位全加器二进制乘法器TI[DATA]TI[DATA]SN74365A 六总线驱动器TI[DATA]SN74366A 六反相总线驱动器TI[DATA]SN74367A 六总线驱动器TI[DATA]SN74368A 六反相总线驱动器TI[DATA]TI[DATA]4位二进制计数器TI[DA TA]2输入端与非门TI[DA TA]2输入端与非门(OC)2输入端或非门TI[DA TA]2输入端与非门(OC) TI[DATA]TI[DATA](OC) TI[DATA](OC,30V),驱动器(OC,30V)2输入端与门TI[DATA]2输入端与门(OC) TI[DATA]3输入端与非门TI[DA TA]3输入端与门3输入端与非门(OC) TI[DATA]4输入端与非门TI[DA TA]TI[DATA]3输入端与门(OC)SN74LS16 六高压输出反相器(OC),驱动器(OC)4输入端与非门TI[DA TA]4输入端与门SN74LS22 双4输入端与非门(OC) TI[DA TA]SN74LS24A 施密特与非门/变换器2输入端高压输出与非缓冲器TI[DA TA]3输入端或非门TI[DA TA]2输入端或非缓冲器TI[DA TA]输入端与非门TI[DATA]2输入端或门TI[DATA]SN74LS40 双4输入端与非缓冲器TI[DATA]线-10线译码器七段译码,驱动器TI[DATA]TA] 路3-3输入,2路2-2输入与或非门TI[DA TA]路2-3-3-2输入与或非门TI[DATA]路4-4输入与或非门SN74LS56 FREQUENCY DIVIDERSSN74LS57 FREQUENCY DIVIDERSD型触发器TI[DA TA]D型触发器TI[DATA]SN74LS78A 双D型触发器TI[DATA]/反码,0/1单元TI[DA TA]SN74LS91 8位移位寄存器TI[DATA]SN74LS95B 4位移位寄存器TI[DA TA]2输入端与非门TI[DA TA]双J-K触发器TI[DATA]位移位寄存器TI[DA TA]双下降沿J-K触发器双J-K触发器TOR TI[DA TA] 可重触发双稳态触发器TI[DATA]四总线缓冲器TI[DATA]四总线缓冲器。
SN74193N中文资料
Copyright © 1988, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9558401QEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC 5962-9558401QFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC 5962-9558401QFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC 76006012A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 76006012A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 7600601EA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC 7600601EA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC 7600601FA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC 7600601FA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/01309BEA OBSOLETE CDIP J16TBD Call TI Call TIJM38510/01309BEA OBSOLETE CDIP J16TBD Call TI Call TIJM38510/31508B2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NCJM38510/31508B2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NCJM38510/31508BEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508BEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508BFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/31508BFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/31508SEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508SEA ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCJM38510/31508SFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NCJM38510/31508SFA ACTIVE CFP W161TBD Call TI Level-NC-NC-NC SN54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN54193J OBSOLETE CDIP J16TBD Call TI Call TISN54193J OBSOLETE CDIP J16TBD Call TI Call TISN54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SN74192N OBSOLETE PDIP N16TBD Call TI Call TISN74192N OBSOLETE PDIP N16TBD Call TI Call TISN74193N OBSOLETE PDIP N16TBD Call TI Call TISN74193N OBSOLETE PDIP N16TBD Call TI Call TISN74193N3OBSOLETE PDIP N16TBD Call TI Call TISN74193N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS192D OBSOLETE SOIC D16TBD Call TI Call TISN74LS192D OBSOLETE SOIC D16TBD Call TI Call TISN74LS192N OBSOLETE PDIP N16TBD Call TI Call TISN74LS192N OBSOLETE PDIP N16TBD Call TI Call TISN74LS193D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAROrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN74LS193DE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74LS193DRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN74LS193J OBSOLETE CDIP J16TBD Call TI Call TISN74LS193J OBSOLETE CDIP J16TBD Call TI Call TISN74LS193N ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74LS193N ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS193N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS193N3OBSOLETE PDIP N16TBD Call TI Call TISN74LS193NE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74LS193NE4ACTIVE PDIP N1625Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74LS193NSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS193NSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS193NSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LS193NSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCSNJ54192J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NCSNJ54192W ACTIVE CFP W161TBD Call TI Level-NC-NC-NCSNJ54192W ACTIVE CFP W161TBD Call TI Level-NC-NC-NCSNJ54193J OBSOLETE CDIP J16TBD Call TI Call TISNJ54193J OBSOLETE CDIP J16TBD Call TI Call TISNJ54193W OBSOLETE CFP W16TBD Call TI Call TISNJ54193W OBSOLETE CFP W16TBD Call TI Call TISNJ54LS193FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS193FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SNJ54LS193J ACTIVE CDIP J161TBD Call TI Level-NC-NC-NC SNJ54LS193W ACTIVE CFP W161TBD Call TI Level-NC-NC-NC SNJ54LS193W ACTIVE CFP W161TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part ina new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
FPGA可编程逻辑器件芯片EP3SL70F484I3N中文规格书
Table 34.Supported Register Configurations For Sum of Two FP16 Multiplication with Accumulation Mode Latency Data Input Register Adder 1st Pipeline Register Adder 2nd Pipeline Register Multiplie r 1st Pipeline Register Multiplie r 2nd Pipeline Register Adder Input Register Adder Pipeline Register Output Registeraccumul ate_clke n fp16_mu lt_input _clken accum_p ipeline_c lken accum_2nd_pipel ine_clke nmult_pip eline_clk en mult_2n d_pipeli ne_clken accum_a dder_clk en adder_in put_clke n adder_pl _clken output_c lken 1Disable Disable Disable Disable Disable Disable Disable Disable Disable Enable 2Enable Enable Disable Disable Disable Disable Disable Disable Disable Enable ≥3Enable Enable Disable,enable Disable,enable Disable Disable Enable Enable Disable Enable ≥4Enable Enable Disable,enable Disable,enable Disable Disable Enable Enable Enable Enable ≥5Enable Enable Disable,enable Disable,enable Disable,enable Enable Enable Enable Enable Enable Table 35.Supported Register Configurations For FP16 Vector One Mode Latency Data Input Register Adder 1st Pipeline Register Adder 2nd Pipeline Register Multiplier 1st Pipeline Register Multiplier 2nd Pipeline Register Adder Input Register Adder Pipeline Register Output Registerfp32_add er_a_clke n fp16_mul t_input_c lken fp32_add er_a_chai nin_pl_cl kenfp32_add er_a_chai nin_2nd_pl_clken mult_pipe line_clke n mult_2nd _pipeline _clken adder_inp ut_clken adder_pl_clken output_cl ken 0Disable Disable Disable Disable Disable Disable Disable Disable Disable 1Enable Enable Disable Disable Disable Disable Disable Disable Disable 1Disable Disable Disable Disable Disable Disable Disable Disable Enable 2Enable Enable Disable Disable Disable Disable Disable Disable Enable ≥3Enable Enable Disable,enable Disable,enable Disable Disable Enable Disable Enable ≥4Enable Enable Disable,enable Disable,enable Disable Disable Enable Enable Enable ≥5Enable Enable Disable,enable Disable,enable Disable,enable Disable,enable Enable EnableEnable Table 36.Supported Register Configurations For FP16 Vector Two Mode 4.Intel Agilex Variable Precision DSP Blocks Design ConsiderationsUG-20213 | 2021.02.05Send FeedbackLatency Data Input Register Adder 1st Pipeline Register Adder 2nd Pipeline Register Multiplier 1st Pipeline Register Multiplier 2nd Pipeline Register Adder Input Register Adder Pipeline Register Output Registerfp32_add er_a_clke n fp16_mul t_input_c lken fp32_add er_a_chai nin_pl_cl kenfp32_add er_a_chai nin_2nd_pl_clken mult_pipe line_clke n mult_2nd _pipeline _clken adder_inp ut_clken adder_pl_clken output_cl ken 1Disable Disable Disable Disable Disable Disable Disable Disable Enable 2Enable Enable Disable Disable Disable Disable Disable Disable Enable ≥3Enable Enable Disable,enable Disable,enable Disable Disable Enable Enable Enable ≥4Enable Enable Disable,enable Disable,enable Disable Disable Enable Enable Enable Table 37.Supported Register Configurations For FP16 Vector Three Mode Latency Data Input Register Adder 1st Pipeline Registe r Adder 2nd Pipeline Registe r Multiplier 1st Pipeline Registe r Multipli er 2nd Pipeline Registe r Adder Input Register Adder Pipeline Registe rOutput Registe r accumu late_clk en fp32_ad der_a_c lken fp16_m ult_inp ut_clke naccum_pipeline _clken accum_2nd_pip eline_cl ken mult_pi peline_clken mult_2nd_pipe line_clk en accum_adder_c lken adder_i nput_cl ken adder_p l_clken output_clken 1Disable Disable Disable Disable Disable Disable Disable Disable Disable Disable Enable 2Enable Enable Enable Disable Disable Disable Disable Disable Disable Disable Enable ≥3Enable Enable Enable Disable,enable Disable,enable Disable Disable Enable Enable Enable Enable ≥4Enable Enable Enable Disable,enable Disable,enable Disable,enable Enable Enable Enable Enable Enable4.2.2. Chainout AdderYou can use the output chaining path to add results from another DSP block.Support for certain operation modes:•Multiply-add or multiply-subtract mode •Vector one mode •Vector two mode4.Intel Agilex Variable Precision DSP Blocks Design ConsiderationsUG-20213 | 2021.02.05Send Feedback5.Native Fixed Point DSP Intel Agilex FPGA IP Core ReferencesThe Native Fixed Point DSP Intel Agilex FPGA IP core instantiates and controls a single Intel Agilex Variable Precision DSP block.Operational modes supported in this IP core include:•9 × 9 sum-of-4 mode •18 × 18 full mode •18 × 18 sum-of-2 mode •18 × 18 plus 36 mode •18 × 18 systolic mode •27 × 27 mode Figure 50.Native Fixed Point DSP Intel Agilex FPGA IP Core Functional Block Diagramaaena clr clk a bybxcoe fsel bzaccumulate loadconst *This block diagram shows the functional representation of the DSP block.The pipeline registers are embedded within the various circuits of the DSP block.UG-20213 | 2021.02.05Send FeedbackISO 9001:2015Registered。
SN74123中文资料
PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.1POST OFFICE BOX 655303 • DALLAS, TEXAS 752652POST OFFICE BOX 655303 • DALLAS, TEXAS 752653 POST OFFICE BOX 655303 • DALLAS, TEXAS 752654POST OFFICE BOX 655303 • DALLAS, TEXAS 752655 POST OFFICE BOX 655303 • DALLAS, TEXAS 752656POST OFFICE BOX 655303 • DALLAS, TEXAS 752657 POST OFFICE BOX 655303 • DALLAS, TEXAS 752658POST OFFICE BOX 655303 • DALLAS, TEXAS 752659 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265PACKAGING INFORMATIONOrderable Device Status (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)5962-7603901VEA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC 5962-7603901VFAACTIVE CFP W 161None Call TI Level-NC-NC-NC 7603901EA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC 7603901FA ACTIVE CFP W 161None Call TI Level-NC-NC-NC JM38510/01203BEA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC JM38510/31401B2A ACTIVE LCCC FK 201None Call TI Level-NC-NC-NC JM38510/31401BEA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC JM38510/31401BFAACTIVE CFP W 161None Call TI Level-NC-NC-NC SN54122J OBSOLETE CDIP J 14None Call TI Call TISN54123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SN54LS123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SN74122N OBSOLETE PDIP N 14None Call TI Call TISN74123N ACTIVE PDIP N 1625Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC SN74123N3OBSOLETE PDIP N 16None Call TI Call TISN74LS122D ACTIVE SOIC D 1450Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS122DR ACTIVE SOIC D 142500Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS122N ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC SN74LS122N3OBSOLETE PDIP N 14None Call TI Call TISN74LS122NSR ACTIVE SO NS 142000Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS123D ACTIVE SOIC D 1640Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS123DR ACTIVE SOIC D 162500Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS123J OBSOLETE CDIP J 16None Call TI Call TISN74LS123N ACTIVE PDIP N 1625Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC SN74LS123N3OBSOLETE PDIP N 16None Call TI Call TISN74LS123NSR ACTIVE SO NS 162000Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SNJ54122J OBSOLETE CDIP J 14None Call TI Call TISNJ54123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SNJ54123W ACTIVE CFP W 161None Call TI Level-NC-NC-NC SNJ54LS123FK ACTIVE LCCC FK 201None Call TI Level-NC-NC-NC SNJ54LS123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SNJ54LS123WACTIVECFPW161NoneCall TILevel-NC-NC-NC(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.PACKAGE OPTION ADDENDUM28-Feb-2005Addendum-Page 1元器件交易网OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -May not be currently available -please check /productcontent for the latest availability information and additional product content details.None:Not yet available Lead (Pb-Free).Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green (RoHS &no Sb/Br):TI defines "Green"to mean "Pb-Free"and in addition,uses package materials that do not contain halogens,including bromine (Br)or antimony (Sb)above 0.1%of total product weight.(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.PACKAGE OPTION ADDENDUM 28-Feb-2005Addendum-Page 2IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN74LS123中文资料
RETRIGGERABLE MONOSTABLE MULTIVIBRATORSThese dc triggered multivibrators feature pulse width control by three meth-ods. The basic pulse width is programmed by selection of external resistance and capacitance values. The LS122 has an internal timing resistor that allows the circuits to be used with only an external capacitor. Once triggered, the ba-sic pulse width may be extended by retriggering the gated low-level-active (A)or high-level-active (B) inputs, or be reduced by use of the overriding clear.•Overriding Clear Terminates Output Pulse•Compensated for V CC and T emperature Variations•DC Triggered from Active-High or Active-Low Gated Logic Inputs •Retriggerable for Very Long Output Pulses, up to 100% Duty Cycle •Internal Timing Resistors on LS122SN54/74LS122 (TOP VIEW)(SEE NOTES 1 THRU 4)SN54/74LS123 (TOP VIEW)(SEE NOTES 1 THRU 4)NOTES:1.An external timing capacitor may be connected between C ext and R ext /C ext (positive).2.To use the internal timing resistor of the LS122, connect R int to V CC .3.For improved pulse width accuracy connect an external resistor between R ext /C ext and V CC with R int open-circuited.4.To obtain variable pulse widths, connect an external variable resistance between R int /C ext and V CC .R ext/CR ext/C ext 11ĂRext/2CLRC extNC Ċ NO INTERNAL CONNECTION.。
sn74121n工作原理_解释说明以及概述
sn74121n工作原理解释说明以及概述1. 引言1.1 概述本篇长文将会对SN74121N进行深入的解析和说明，包括其工作原理、具体解释概念和术语、示意图解析，以及实际应用案例分析。
此外，还将简要概述SN74121N的设计与制造历史，并探讨其基本特点以及未来发展趋势。
1.2 文章结构文章共分为五个主要部分：引言、SN74121N工作原理、解释说明、概述和结论。
在引言部分，我们将呈现出文章的整体架构和内容提要。
接着，在SN74121N 工作原理部分，我们将对该器件进行简介和功能描述，并详细解释其工作原理。
紧接着是解释说明部分，在其中我们将具体解释相关概念和术语，并进行示意图解析，并通过实际应用案例分析来突显SN74121N的重要性和实际价值。
在概述部分，我们将回顾指出SN74121N的设计与制造历史，并阐述它的基本特点以及未来发展趋势。
最后，在结论部分，我们将对全文进行总结回顾并展望SN74121N未来可能的发展方向。
1.3 目的本文旨在全面了解和阐释SN74121N的工作原理，并通过解释说明和概述部分的详细论述，使读者对SN74121N有更深入的认识和理解。
同时，文章还将探讨SN74121N的实际应用案例和未来发展趋势，以进一步突显其在电子领域中的重要性和研究价值。
通过本文的阅读，读者将能够全面了解SN74121N，并能够在相关领域中进行合理应用和深入研究。
2. sn74121n工作原理：2.1 简介：sn74121n是一种多功能的可重触发型单稳态多谐振荡器。
它由德州仪器（Texas Instruments）公司设计和制造，被广泛应用于数字电子领域。
该芯片可以产生固定时长的输出脉冲，在输入触发信号改变时，输出脉冲不受影响并维持原有的时间长度。
2.2 功能描述：sn74121n主要具有以下功能特点：- 多谐振荡：能够在多个频率下工作，通过设置外部元件进行调节。
- 可重触发性：当输入触发信号改变时，输出脉冲不会因为新的触发信号而中断或重新启动，仅以其固定时间长度延长。
SN7413资料
IMPORTANT NOTICETexas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current.TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”).TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS.Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI products in such applications requires the written approval of an appropriate TI officer. Questions concerning potential risk applications should be directed to TI through a local SC sales office.In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used.Copyright © 1996, Texas Instruments Incorporated。
各种芯片代号及作用
74系列芯片功能大全输入端四与非门集电极开路2输入端四与非门输入端四或非门集电极开路2输入端四与非门六反相器集电极开路六反相器集电极开路六反相高压驱动器集电极开路六正相高压驱动器输入端四与门集电极开路2输入端四与门输入端3与非门带清除主从双J-K触发器带预置清除正触发双J-K触发器输入端3与门带预置清除负触发双J-K触发器开路输出3输入端三与非门单稳态多谐振荡器可再触发单稳态多谐振荡器双可再触发单稳态多谐振荡器三态输出高有效四总线缓冲门三态输出低有效四总线缓冲门输入端双与非施密特触发器输入端四与非施密特触发器输入端与非门四异或门线译码器/复工器双2-4线译码器/复工器六反相施密特触发器—十进制译码/驱动器开路输出3输入端三与门选1数据选择/多路开关选1数据选择器双4选1数据选择器线—16线译码器图腾柱输出译码器/分配器开路输出译码器/分配器同相输出四2选1数据选择器反相输出四2选1数据选择器开路输出六反相缓冲/驱动器可预置BCD异步清除计数器可预置BCD同步清除计数器可予制四位二进制同步清除计数器八位串行入/并行输出移位寄存器八位并行入/串行输出移位寄存器八位并入/串出移位寄存器二进制四位加/减同步计数器开路输出六同相缓冲/驱动器开路输出4×4寄存器堆三态输出四位D型寄存器带公共时钟和复位六D触发器带公共时钟和复位四D触发器位奇数/偶数发生器/校验器算术逻辑单元/函数发生器二进制—BCD代码转换器同步加/减计数器二进制同步可逆计数器可预置BCD双时钟可逆计数器可预置四位二进制双时钟可逆计数器四位双向通用移位寄存器四位并行通道移位寄存器十进制/二-十进制可预置计数锁存器二进制可预置锁存器/计数器输入端双与非门输入端双与门开路输出4输入端双与非门双/单稳态多谐振荡器74240 TTL 八反相三态缓冲器/线驱动器74241 TTL 八同相三态缓冲器/线驱动器74243 TTL 四同相三态总线收发器74244 TTL 八同相三态缓冲器/线驱动器74245 TTL 八同相三态总线收发器—7段译码/升压输出驱动器—7段译码/开路输出驱动器三态输出8选1数据选择器/复工器74253 TTL 三态输出双4选1数据选择器/复工器74256 TTL 双四位可寻址锁存器74257 TTL 三态原码四2选1数据选择器/复工器74258 TTL 三态反码四2选1数据选择器/复工器输入端高压接口四与非门输入端双或非门输入端四异或非门输入端三或非门带公共时钟复位八D触发器四图腾柱输出S-R锁存器输入端四或非门缓冲器位二进制全加器二/五分频十进制计数器74293 TTL 二/八分频四位二进制计数器74295 TTL 四位双向通用移位寄存器四2输入多路带存贮开关74299 TTL 三态输出八位通用移位寄存器输入端与非门输入端四或门带符号扩展端八位移位寄存器三态输出八位双向移位/存贮寄存器开路输出2输入端四或非缓冲器74347 TTL BCD—7段译码器/驱动器74352 TTL 双4选1数据选择器/复工器74353 TTL 三态输出双4选1数据选择器/复工器门使能输入三态输出六同相线驱动器门使能输入三态输出六同相线驱动器门使能输入三态输出六反相线驱动器线使能输入三态六同相线驱动器线使能输入三态六反相线驱动器开路输出2输入端四与非缓冲器三态同相八D锁存器三态反相八D锁存器位双稳态锁存器单边输出公共使能八D锁存器单边输出公共使能六D锁存器双边输出公共使能四D锁存器开路输出2输入端四与非缓冲器多功能八进制寄存器开路输出2输入端四与非缓冲器双十进制计数器双四位二进制计数器输入端双与非缓冲器—十进制代码转换器74352 TTL 双4选1数据选择器/复工器74353 TTL 三态输出双4选1数据选择器/复工器门使能输入三态输出六同相线驱动器门使能输入三态输出六反相线驱动器线使能输入三态六同相线驱动器线使能输入三态六反相线驱动器开路输出2输入端四与非缓冲器三态反相八D锁存器位双稳态锁存器单边输出公共使能八D锁存器单边输出公共使能六D锁存器双边输出公共使能四D锁存器开路输出2输入端四与非缓冲器多功能八进制寄存器开路输出2输入端四与非缓冲器双十进制计数器双四位二进制计数器输入端双与非缓冲器—十进制代码转换器74447 TTL BCD—7段译码器/驱动器—十进制代码转换/驱动器多路转接复用器多工器双8:1多路转接复用器多工器四4:1多路转接复用器多工器—7段低有效译码/驱动器十位比较器八进制计数器三态同相2与使能端八总线缓冲器三态反相2与使能八总线缓冲器三态同相2使能端八总线缓冲器三态反相2使能端八总线缓冲器八位双向计数器—7段高有效译码/驱动器—7段译码器/内部上拉输出驱动双十进制计数器74491 TTL 十位计数器74498 TTL 八进制移位寄存器输入端双与或非门八位逐次逼近寄存器八位逐次逼近寄存器输入端双与或非门74533 TTL 三态反相八D锁存器三态反相八D锁存器四路输入与或非门八位三态反相输出总线缓冲器输入端二路输入与或非门74563 TTL 八位三态反相输出触发器八位三态反相输出D触发器74573 TTL 八位三态输出触发器八位三态输出D触发器74645 TTL 三态输出八同相总线传送接收器带清除负触发双J-K触发器带置位复位正触发双D触发器带预置清除双J-K触发器四位二进制快速进位全加器四位数字比较器输入端四异或门可二/五分频十进制计数器可二/八分频二进制计数器四位并行输入\输出移位寄存器位同步二进制乘法器CD系列芯片功能大全3输入端或非门+单非门TI2输入端或非门FSC[DATA]/TI[DA TA]/HIT4输入端或非门TI[DATA]/NSC位串入/串出移位寄存器TI[DA TA]/NSCFSC[DATA](PDF-51K)/NSC位超前进位全加器NSC/变换器TI[DATA](PDF-305K)/变换器FSC[DATA](PDF-50K)/TI[DA TA]2输入端与非门FSC[DATA](PDF-106K)/HIT/TI[DATA]4输入端与非门TI[DATA]/NSC-从D型触发器FSC[DATA](PDF-76K)/NSC/TOS位串入/并入-串出移位寄存器FSC[DATA](PDF-69K)/NSC4位串入/并出移位寄存器FSC[DATA](PDF-58K)/TIFSC[DATA](PDF-96K)/TI/分配器FSC[DATA](PDF-79K)/TI/MOT1/N计数器TI[DATA]/NSC/MOTFSC[DA TA](PDF-61K)/PHI级串行二进制计数/分频器FSC[DATA](PDF-84K)位串入/并入-串出移位寄存器FSC[DATA](PDF-72K)/PHI/NSC/分配器FSC[DATA](PDF-79K)/NSC/MOT3输入端与非门FSC[DATA](PDF-51K)/MOT/TI[DATA]级二进制串行计数/分频器FSC[DATA](PDF-56K)/MOT/TI3输入端或非门TI[DATA]/NSC/MOT/7段译码器TI[DATA]/NSC/MOTJ-K触发器FSC[DATA](PDF-60K)/MOT/TI码十进制译码器FSC[DATA](PDF-56K)/MOT/TIFSC[DATA](PDF-96K)/MOT/TIFSC[DATA](PDF-48K)/MOT/TI/GOL位串入/串出移位存储器TI[DA TA]/NSC/MOT/7段译码器TI[DATA]/NSC位通用总线寄存器TI[DATA]/NSC/MOT位并入/串入-并出/串出移位寄存TI[DATA]/NSC/MOTNSC/TI级二进制串行计数/分频器FSC[DATA](PDF-84K)/MOT/TI /反相缓冲器TI[DATA]/NSC/MOTD型触发器TI[DATA]/NSC/MOTR-S锁存触发器("1"触发) FSC[DA TA](PDF-70K)/MOT/TI R-S锁存触发器("0"触发) FSC[DA TA](PDF-70K)/MOT/TIFSC[DA TA](PDF-175K)/MOT/TI/PHI/单稳态多谐振荡器FSC[DA TA](PDF-90K)/MOT/TI输入端可扩展多功能门TI[DATA]/NSC/HIT/变换器FSC[DATA](PDF-65K)/HIT/TI/变换器FSC[DATA](PDF-65K)/MOT/TIFSC[DA TA](PDF-126K)/MOT/TI[DATA]4选1模拟开关FSC[DATA](PDF-126K)/MOT/TI[DATA]FSC[DATA](PDF-126K)/MOT/TI[DATA]TI[DA TA]/NSC/HIT段译码/液晶驱动器TI[DA TA]/NSC/HITTI[DA TA]/NSC/HIT分频计数器TI[DA TA]/NSC级二进制串行计数/分频器FSC[DATA](PDF-84K)/TI/MOTTI[DA TA]/NSC/HITFSC[DATA](PDF-100K)/NSC/TI/MOT选1模拟开关TI[DA TA]/NSC/与门NSC/HIT/TIFSC[DATA](PDF-81K)/HIT/TIFSC[DATA](PDF-55K)/HIT/TI[DATA]2输入端或门FSC[DA TA](PDF-99K)/TI[DATA]4输入端或门TI[DA TA]/NSC3输入端与门TI[DA TA]/NSC3输入端或门TI[DA TA]/NSCD寄存器TI[DA TA]2输入端异或非门TI[DA TA]/HIT输入端或非门/或门TI[DA TA]2输入端与门FSC[DA TA](PDF-99K)/HIT/TI[DATA]4输入端与门TI[DA TA]/NSC/HIT2路2输入端与或非门TI[DA TA]2输入端可扩展与或非门TI[DATA]TI[DATA]2输入端施密特触发器FSC[DA TA](PDF-92K)/MOT/ST位移位存储总线寄存器FSC[DATA](PDF-70K)/TI/PHI输入端J-K触发器TI[DA TA]NSC/MOT/TI位可寻址锁存器FSC[DATA](PDF-55K)/MOT/ST 位左/右移位寄存器位奇偶较验器位可预置同步BCD减法计数器TI[DATA]位可预置同步二进制减法计数器TI[DA TA]位双向移位寄存器先入先出FI-FD寄存器六施密特触发器FSC[DATA](PDF-69K)/TI双2输入端与非缓冲/驱动器TI[DA TA]/HAR字×4位多通道寄存器四低-高电平位移器TI[DA TA]十进制加/减,计数,锁存,译码驱动TI[DATA]/ST线编码器NSC\MOT可预置BCD加计数器NSC\MOT可预置4位二进制加计数器NSC\MOT加法计数器NSC\MOT位二进制同步计数器NSC\MOT六锁存D型触发器FSC[DA TA](PDF-63K)/TI/MOT四D型触发器FSC[DA TA](PDF-63K)/TI/MOT位算术逻辑单元/函数发生器超前位发生器可预置BCD加/减计数器(双时钟) FSC[DA TA](PDF-77K)/TI 可预置4位二进制加/减计数器FSC[DA TA](PDF-77K)/TI 位并入/串入-并出/串出移位寄存NSC\MOT位并入/串入-并出/串出移位寄存NSC\MOT4多端口寄存器输入端双与门及2输入端或非门/缓冲器TI[DA TA]TI[DATA]/FSC[DA TA]TI[DATA]2输入可扩展或非门4位锁存D型触发器TI[DATA]BCD码加/减计数器TI[DATA]锁存,7段译码,驱动器TI[DA TA]/FSC[DATA]/MOTTI[DA TA]/FSC[DATA]/MOT锁存,7段译码,驱动器(消隐) MOT位锁存,4线-16线译码器TI[DATA]/FSC[DA TA]位锁存,4线-16线译码器TI[DATA]/FSC[DA TA]4位二进制加/减计数器TI[DA TA]BCD同步加计数器TI[DA TA]/NSC/FSC/PHI4位二进制同步加计数器TI[DATA]/NSC/FSC/PHI级分频器TI[DA TA]BCD同步1/N计数器TI[DATA]/MOT4位二进制同步1/N计数器比例乘法器TI[DATA]FSC[DA TA]/单八路模拟开关5输入端优势逻辑门位奇偶校验器位优先编码器TI[DATA]TI[DATA]FSC[DATA]/MOT/PHI/计时器TI[DA TA]/FSC[DATA]七段锁存译码,驱动器TI[DA TA]/NSC/FSC/MOT七段锁存译码,驱动器七段译码/大电流驱动器2通道模拟开关BCD计数器/分离器TI[DA TA]/分离器TI[DA TA]八段译码器加法器求补器/比较器NSC/MOT位数值比较器TI[DA TA]/NSC/FSC/MOT位可寻址锁存器4×1交叉点开关HARSN系列芯片功能大全2输入端与非门(OC)2输入端或非门TI[DATA]2输入端与非门(OC) TI[DATA]TI[DATA](OC) TI[DATA](OC,30V) TI[DA TA],驱动器(OC,30V) TI[DATA] 2输入端与门TI[DA TA]2输入端与门(OC) TI[DATA]3输入端与非门TI[DATA]3输入端与非门(OC) TI[DATA]4输入端与非门TI[DATA]TI[DATA]/驱动器TI[DA TA]/驱动器(OC,15V) TI[DATA] 4输入端与非门TI[DATA]4输入端与非门(OC) TI[DATA]SN7423 可扩展双4输入端或非门TI[DATA]4输入端或非门TI[DATA]2输入端高压输出与非缓冲器TI[DATA] SN7427 三3输入端或非门TI[DA TA]2输入端或非缓冲器TI[DATA]输入端与非门TI[DA TA]2输入端或门TI[DA TA]SN7433 四2输入端或非缓冲器(OC) TI[DATA]2输入端与非缓冲器TI[DATA]2输入端与非缓冲器(OC) TI[DA TA]SN7439 四2输入端与非缓冲器(OC) TI[DATA]4输入端与非缓冲器TI[DATA]十进制译码/驱动器TI[DA TA]SN7446A BCD-TO-七段译码/驱动器TI[DA TA]七段译码/驱动器TI[DATA]七段译码/驱动器TI[DA TA]3-3输入,2路2-2输入与或非门TI[DA TA]3-3输入,2路2-2输入与或非门TI[DA TA]2-2-2-2输入与或非门TI[DA TA]2-2-3-2输入与或非门TI[DA TA]SN7470 与门输入上升沿J-K型触发器TI[DATA]J-K型触发器TI[DATA]J-K型触发器TI[DATA]D型触发器TI[DA TA]SN7475 双异或门TI[DA TA]J-K型触发器TI[DATA]位数值比较器TI[DA TA]/反码,0/1单元TI[DA TA]SN7490A 异步十进制计数器TI[DA TA]SN7491A 8位移位寄存器TI[DATA]SN7492A ASYNCHRONOUS DIVIDE-BY-TWELVE COUNTERS TI[DATA] SN7493A ASYNCHRONOUS 4-BIT BINARY COUNTERS TI[DATA]TI[DATA]SN7495A 4位移位寄存器TI[DATA]位同步二进制乘法器TI[DATA]双主-从J-K触发器TI[DA TA]双J-K触发器TI[DA TA]SN74111 双主-从J-K触发器TI[DA TA]4位锁存器TI[DATA]双脉冲同步驱动器TI[DA TA]TA]TA] 可重触发双稳态触发器TI[DA TA]四总线缓冲器TI[DA TA]四总线缓冲器TI[DA TA]可再触发单稳态振荡器TI[DA TA]四2输入端与非门TI[DA TA]TES TI[DA TA]计数，七段LED 驱动器TI[DATA]七段译码驱动器TI[DATA]线-4线优先编码器TI[DATA]线-3线优先编码器TI[DA TA]选1数据选择器TI[DATA]选1数据选择器TI[DA TA]4选1数据选择器TI[DA TA]线-16线译码器TI[DATA]2线-4线译码器TI[DATA]SN74156 双2线-4线译码器OC TI[DATA]2选1数据选择器TI[DA TA]线-16线译码器(OC) TI[DATA]十进制同步计数器TI[DA TA]位二进制同步计数器TI[DATA]十进制同步计数器TI[DA TA]位二进制同步计数器TI[DATA]位移位寄存器TI[DATA]位移位寄存器TI[DATA]位移位寄存器TI[DATA]TE MULTIPLIERTA]六上升沿D型发器TI[DA TA]四上升沿D型触发器TI[DATA]TA]TA]SN74190 十进制加/减计数器TI[DA TA]位二进制加/减计数器TI[DATA]/减计数器(双时钟)位二进制加/减计数器(双时钟)位双向移位寄存器TI[DATA]TI[DATA]TI[DATA]TI[DATA]TI[DATA]SN74199 移位寄存器TI[DA TA]双单稳态触器TI[DA TA]SN74246 BCD7段译码/驱动器TI[DATA]SN74247 4线-7段译码/高压输出驱动器TI[DATA]SN74248 4线-7段译码/驱动器TI[DATA]选1数据选择器TI[DATA]位可寻址锁存器TI[DATA]D触发器(公共时钟,单边输出) TI[DATA]TA]位二进制超前位全加器二进制乘法器TI[DATA]TI[DATA]SN74365A 六总线驱动器TI[DATA]SN74366A 六反相总线驱动器TI[DATA]SN74367A 六总线驱动器TI[DATA]SN74368A 六反相总线驱动器TI[DATA]TI[DATA]4位二进制计数器TI[DA TA]2输入端与非门TI[DA TA]2输入端与非门(OC)2输入端或非门TI[DA TA]2输入端与非门(OC) TI[DATA]TI[DATA](OC) TI[DATA](OC,30V),驱动器(OC,30V)2输入端与门TI[DATA]2输入端与门(OC) TI[DATA]3输入端与非门TI[DA TA]3输入端与门3输入端与非门(OC) TI[DATA]4输入端与非门TI[DA TA]TI[DATA]3输入端与门(OC)SN74LS16 六高压输出反相器(OC),驱动器(OC)4输入端与非门TI[DA TA]4输入端与门SN74LS22 双4输入端与非门(OC) TI[DA TA]SN74LS24A 施密特与非门/变换器2输入端高压输出与非缓冲器TI[DA TA]3输入端或非门TI[DA TA]2输入端或非缓冲器TI[DA TA]输入端与非门TI[DATA]2输入端或门TI[DATA]SN74LS40 双4输入端与非缓冲器TI[DATA]线-10线译码器七段译码,驱动器TI[DATA]TA] 路3-3输入,2路2-2输入与或非门TI[DA TA]路2-3-3-2输入与或非门TI[DATA]路4-4输入与或非门SN74LS56 FREQUENCY DIVIDERSSN74LS57 FREQUENCY DIVIDERSD型触发器TI[DA TA]D型触发器TI[DATA]SN74LS78A 双D型触发器TI[DATA]/反码,0/1单元TI[DA TA]SN74LS91 8位移位寄存器TI[DATA]SN74LS95B 4位移位寄存器TI[DA TA]2输入端与非门TI[DA TA]双J-K触发器TI[DATA]位移位寄存器TI[DA TA]双下降沿J-K触发器双J-K触发器TOR TI[DA TA] 可重触发双稳态触发器TI[DATA]四总线缓冲器TI[DATA]四总线缓冲器。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
元器件交易网
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright © 1998, Texas Instruments Incorporated。