FI-X产品说明

合集下载

FLX-AES50 AES50-to-anything 数字音频转换器用户手册说明书

FLX-AES50 AES50-to-anything 数字音频转换器用户手册说明书

ruUser's ManualTable of Contents1. QUICK REFERENCE (4)2. INTRODUCTION (5)2.1. Purpose (5)2.2. Box Contents (5)2.3. Conventions used in this manual (5)3. POSSIBLE SETUPS (6)3.1. Available AUX cards (6)3.2. Available FLX devices (7)3.3. FlexLink connection (7)4. AUDIO ROUTING (8)4.1. Modes and indication (8)4.2. Selecting the Route Mode (9)4.3. Remarks (9)5. CLOCK SETTINGS (10)5.1. Clock sources and indication (10)5.2. Selecting the Clock Source (10)6. ACCESSING INTERNALS (12)6.1. Opening the device (12)6.2. Inside view (12)6.3. Installing AUX cards (12)7. DIP SETTINGS (13)7.1. AES50 A+B channel mapping (DIP1) (13)7.2. AUX channel location (DIP2) (13)7.3. AUX config (DIP4..6) (14)7.4. FlexLink channel mapping (DIP7..9) (15)8. SPECIAL OPERATING MODES (16)8.1. Version Display (16)8.2. LED Test (16)8.3. Interface Self-Test (16)8.4. Firmware update (17)9. SPECIFICATIONS (18)10. ACCESSORIES (18)10.1. Rack mount kits (18)10.2. Additional (redundant) power supply (18)11. APPENDIX (19)11.1. Warranty (19)11.2. Manufacturer contact (19)11.3. FCC Compliance (19)FLX-AES50 11.4. Recycling (20)11.5. Document Revision History (20)11.6. About this document (20)User's Manual1. QUICK REFERENCE➊Power switch and "power good" indicators.LEDs light up blue when power is available on the respective port.➋Mode indicators/selector. Long-press the "Select" button to change the audio routing between the interfaces. Wait four seconds to activate the selected mode.➌Clock indicators/selector. Long-press the "Select" button to change the clock source and sample-rate. Wait four seconds to activate the selected mode.➍➎AES50 ports A and B➏AUX slot. Accepts optional card for standalone use➐DIP switches, mostly to control output data format. See 7 . DIP Settings➑USB port (firmware update only, no audio)➒Redundant DC input ports➓FlexLink: optional connection to second flexiverter, or to multiverter.FLX-AES502. INTRODUCTION2.1.PurposeThe FLX-AES50 device is a digital audio converter, providing two built-in AES50interfaces (96x96 channels @ 48kHz) and additional slot for one AUX card. It canbe used in different setups, depending on the user's needs:standalone, to convert between the built-in AES50and an AUX card(AES50-to-anything)standalone in-line: signals are transparently passed between both AES50 portsand split to the AUX card (plug-in recording split), while maintaining stageboxremote controltogether with another flexiverter, connected via FlexLink (for up to 160x160channels),together with the multiverter, connected via FlexLink. This provides remotecontrol, channel-wise routing and SRC (Sample Rate Conversion).For a detailed description of possible configurations see 3 . Possible Setups.2.2.Box Contents1 FLX-AES50 Converter1 HDMI cable 0.5m / 1.7 ft with locking screws1 Power supply1 Power cord (country specific)This manual2.3.Conventions used in this manualA button on the front is shown like this: Mode or ClockA LED is shown like this:◌ off / ⬤on / ❇ blinkingUser's Manual3. POSSIBLE SETUPSThe device can be used in three different setups, shown below:3.1.Available AUX cardsAt the time of writing (2021-11), the following AUX cards are available. More will come, please check www.appsys.ch for updates.FLX-AES50AUX-AVB116x16ch / 32x0ch / 0x32ch MILAN-approved AVBAUX-DAC18ch analog outputs (1xDB25)AUX-DANTE64x64ch DANTE network cardAUX-MADI-COAX64x64ch MADI for coaxial cable (BNC connectors)AUX-MADI-OPTO64x64ch MADI optical, SC connector (Multimode 125um 1310 nm)AUX-MADI-SFP64x64ch MADI for SFP (Small-Factor Pluggable) modulesAUX-WORDCLOCK BNC wordclock I/O3.2.Available FLX devicesAt the time of writing (2021-11), the following FLX devices are available. More willcome, please check www.appsys.ch for updates.3.3.FlexLink connectionThe FlexLink connection is designed to connect Flexiverters with each other, orwith the Multiverter. It provides:192x192 channels bi-directional transmission of 24-bit uncompressed audio(fully transparent to AES3 compatible metadata bits)Super-low link latency of 4 samples (ca. 83µs)Dedicated, high-quality reference clock signal with automatic configurationPower supply for connected devices (to reduce cabling), alternatively serves asredundancy scheme when both devices are powered: in case of power failure,both devices keep working from the remaining power supply.Uses standard HDMI cables (with locking screws), to provide easy fieldreplacement in case of defects.1Estimated availability: Q1/2022User's Manual4. AUDIO ROUTINGThe flexiverter can operate in various routing modes, allowing you to pass audiobetween the available interfaces in many different ways. The LEDs in the "MODE"section indicate the involved interfaces.4.1.Modes and indication2All incoming data is also split (output) to FlexLink: AES50 Port A is split to Lane 1 (ch1-64), AES50 Port B is split to Lane 2 (ch65-128) and AUX is split to Lane 3 (ch129-192). The split is not indicated on the LEDs for clarity but is always active.FLX-AES504.2.Selecting the Route ModeLong-press the Mode button until the LEDs are blinking yellow.Current routing mode is shown by alternately yellow blinking LEDs, indicatingthe interfaces where the signal is passed between.Press the Mode button repeatedly to cycle between available modes, untilthe desired mode is shown.After four seconds without interaction, selection mode is terminated and thecurrent setting comes into effect.4.3.RemarksRouting between the selected interfaces is always bi-directional, meaning thataudio is passed between them both ways. A working bi-directional link shows⬤green for both interfaces. If the LED shows ⚪white, the correspondinginterface does only output data but no input on it has been detected. If the LEDshows ⬤ red, the interface is not connected, or the clock is invalid or missing.Channel-wise routing and splitting (crosspoint switch/matrix) between allchannels is possible when the flexiverter is connected to a multiverter. Routingis then done via the multiverter's web interface or via the command line.User's Manual5. CLOCK SETTINGS5.1.Clock sources and indicationThe flexiverter can be clocked from every interface (acting as clock slave), or canrun on its internal clock (acting as clock master).5.2.Selecting the Clock SourceLong-press the Clock button until the LEDs are blinking yellow.Current clock source/modes is shown by blinking LED(s).Press the Clock button repeatedly to cycle between the available clock sources. Depending on the source, you might need to select the desired sample rate (❇44.1 kHz or ❇48 kHz) and/or the appropriate multipliers (❇x2 /❇x4).After four seconds without interaction, clock setting is automatically terminated and the selected clock source comes into effect.6. ACCESSING INTERNALS6.1.Opening the deviceRequired: Torx T10 screwdriver.Power off the device and detach all cables to avoid short-circuit or damage.Detach the device from the rack-mount kit.Remove the four top screws and the top cover by pulling it upwards:6.2.Inside view➊Screws for AUX cover plate➋AUX card connector6.3.Installing AUX cardsRemove the screws holding the cover plate, and the blank cover plate ➊Insert the AUX card from inside, using the supplied cover plate.Make sure it is correctly fitted to the card connector➋Secure the card using two cover screws ➊The card has been installed correctly if you are able to select an audio routingmode involving AUX (long-press MODE button to enter Route Mode Selection).7. DIP SETTINGSFine-tuning of the flexiverter's built-in interface behavior and of the AUX card canbe achieved via DIP settings on the back side. Changing the DIP settings will come immediately into effect. Default setting: all switches up.7.1.AES50 A+B channel mapping (DIP1)Determines how AES50 ports are mapped to the 64 channels of the AUX card(has only an effect in routing modes #2 and #3):7.2.AUX channel location (DIP2)3Determines how the AUX channels are mapped to the FlexLink interface(has only an effect in routing mode #1).3Available from firmware 1.1 on7.3.AUX config (DIP4..6)Many AUX card provide additional settings, which can be adjusted using theseswitches. The actual meaning depends on the type of AUX card installed:For cards not listed, refer to the manual of the respective card, or check for anewer version of this manual.4Applies to outputs only. Input format is always auto-detected, regardless of the switch setting7.4.FlexLink channel mapping (DIP7..9)The FlexLink interface can transmit 192x192 channels, organized in three laneswith 64 channels each. The channel assignment can be adjusted to meet the user's needs, particularly when the device is used in double-FLX configuration (to makesure that all interfaces and channels are mapped to the desired target on the peerFLX device).8. SPECIAL OPERATING MODESSpecial operating modes are accessible by holding down the Mode button while switching on the device. Press Mode again to switch to the next mode:Version Display ⇨ LED Test ⇨ Interface Self-Test ⇨ Normal operation 8.1.Version DisplayThe firmware version "X.Y" and the hardware version "Z" are shown on theLEDs on the front panel:- The number of ⬤pink LEDs lit indicate the major firmware number "X"- The number of ⬤orange LEDs lit indicate the minor firmware number "Y"- The number of ⬤green LEDs lit indicate the hardware version "Z"Example: One (1) ⬤pink LED and three (3) ⬤⬤⬤orange LEDs means"Firmware 1.3", zero green LEDs mean HW version 0.Blinking LEDs mean that the currently installed firmware is a "beta" version. Itis advised to upgrade to an official release version as soon as it is released.Press Mode again to proceed to LED test.8.2.LED TestAll LEDs on the front and on the back should show ⚪ white.Press Mode again to proceed to Interface Self-Test.8.3.Interface Self-TestAll built-in interfaces and the optional AUX card can be tested for correct operation by the user. This is done using the special self-test mode, in which the deviceoutputs a special random test pattern on all channels. This pattern is looped backvia an external cable into the corresponding inputs, where it is checked forconsistency.Self-test mode is indicated with "CLOCK"showing INT/48kHz in ⬤cyan color.The "MODE" LEDs indicate ⬤red (error/no connection) or ⬤green (loopbackdata received ok) for the respective interface.Connect AES50 Port A to Port B using a standard Cat5 cableIf an AUX card is installed, connect all output ports of the AUX card to therespective inputs using a loop-back cable. Note: NOT supported with AUX-ADC, AUX-AES67, AUX-AVB, AUX-DANTE.8.4.Firmware updateThe firmware can be updated from any Windows PC over the rear USB port.▶To update:Download the latest firmware from www.appsys.ch/FLX- A ES50Unpack the firmware package FLX-AES50-Firmware_x.y.zipConnect your PC via USB to the flexiverterPower ON the deviceRun the FLX-AES50_Updater.bat file from the firmware package and follow theinstructions on the screen.Power cycle the device to effect the update.Thanks to the special design of the updater, it is virtuallyimpossible to damage ("brick") the device during update. Ifupdating fails or is interrupted, restart the procedure. You canalso can go back to any older firmware version at any time.9. SPECIFICATIONS10. ACCESSORIES10.1.Rack mount kitsFor integration in 19" racks, two kinds of rack mount kits / brackets are available:RM-FLX1: For mounting one FLX device into 1U 19" spaceRM-FLX2: For mounting two FLX devices into 1U 19" space10.2.Additional (redundant) power supplyPWR-FLX: Additional power supply to provide redundancy for single-FLXconfigurationsFlexLink Cable 0.5m. HDMI cable with locking screws11. APPENDIX11.1.WarrantyWe offer a full two (2) year warranty from the date of purchase. Within this period,we repair or exchange your device free of charge in case of any defect*. If youexperience any problems, please contact us first. We try hard to solve your problem as soon as possible, even after the warranty period.* Not covered by the warranty are any damages resulting out of improper use,willful damage, normal wear-out (especially of the connectors) or connection withincompatible devices.11.2.Manufacturer contactAppsys ProAudioRolf Eichenseher Bullingerstr. 63 / BK241 CH-8004 Zürich Switzerland www.appsys.ch**************Phone: +41 43 537 28 51 Mobile: +41 76 747 07 4211.3.FCC ComplianceThis equipment has been tested and found to comply with the limits for a class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antennaIncrease the separation between the equipment and receiverConnect the equipment into an outlet on a circuit different from that to whichthe receiver is connectedConsult the dealer or an experienced radio/TV technician for helpThis equipment has been verified to comply with the limits for a class B computingdevice, pursuant to FCC Rules. In order to maintain compliance with FCCregulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radioand TV reception. The user is cautioned that changes and modifications made tothe equipment without the approval of manufacturer could void the user’s authority to operate this equipment.11.4.RecyclingAccording to EU directive 2002/96/EU, electronic devices with acrossed-out dustbin may not be disposed into normal domesticwaste. Please return the products back for environment-friendlyrecycling, we'll refund you the shipping fees.11.5.Document Revision History2: Added DIP2 settings1: Initial release11.6.About this documentAll trademarks mentioned in this document are property of the respective owners.All information provided here is subject to change without prior notice.Document Revision: 2 · 2022-05-15Copyright © 2021 Appsys ProAudio · Printed in SwitzerlandIDENT 9.00.16144.00FLX-AES50 Declaration of ConformityThe manufacturer:Appsys ProAudioRolf EichenseherBullingerstr. 63 BK 241CH-8004 ZürichSwitzerlanddeclares under sole responsibility that the products mentioned below:Flexiverter FLX-AES50meet the requirements of the following standards:EN 55024:2010EN 55032:2015 Class BEN 61000-3-2:2006/A1/A2:2009EN 61000-3-3:2009EN 61000-6-3:2007/A1:2011Therefore the product fulfills the demand of the following EC directives:73/23/EWG(Directive related to electrical equipment designed for use within certain voltage limits)89/336/EWG(Directive related to electromagnetic compatibility)The devices are marked accordingly.Zürich, 21.11.2021Rolf Eichenseher (CEO)21。

扫描器流光FLUXAY5的使用方法

扫描器流光FLUXAY5的使用方法

扫描器流光FLUXAY5的使用方法一、新增功能流光IV的高级扫描是和以前版本相比增加的最重要功能之一,包括了如下扫描功能:PORTS(常用端口、自定义端口)POP3(Banner、特定版本漏洞、暴力模式)FTP(Banner、特定版本漏洞、暴力模式)SMTP(Banner、特定版本漏洞、暴力模式)IMAP(Banner、特定版本漏洞、暴力模式)TELNET(Banner、特定版本漏洞)CGI(Banner、Unix/NT自动识别、ErrorPage检测、规则库可手工加入)SQL(通过漏洞扫描、暴力模式)IPC(NETBIOS)(获得用户列表、共享列表、暴力模式)IIS(IIS漏洞)FINGER(Finger漏洞扫描)RPC(Unix Finger漏洞扫描,获得用户列表)MISC(Bind 版本、MySql弱密码扫描)PLUGIN(可以方便地增加对某种类型漏洞的扫描)流光IV和以往版本相比增加(修改)了如下功能:IIS Remote Shell (修改, Remote Execute A-F)IPC Pipe Remote Shell (新增)IPC 植入者(新增)SQL Remote Shell (修改)PC AnyWhere 解码(新增)支持HTTP Basic/Negotiate/NTLM方式认证(新增)IPC探测(修改)IMAP探测(新增)二、基本使用方法从[探测]->[高级扫描功能]启动。

1、设定扫描的范围起始地址/结束地址:需要扫描的IP地址范围。

目标系统:ALL-所有系统NT-NT/2000系统UNIX-UNIX系统,根据选择的不同下面的[检测项目]将会有不同设置。

获取主机名:获取主机的名称。

检测项目:选择需要扫描的项目,根据选择的不同表单会有所不同。

2、端口扫描标准端口扫描:包括常用的服务端口扫描自定端口扫描:范围从1-655343、POP3扫描获取POP3版本信息:取得Banner尝试猜解用户:根据[选项]中的设置对常见用户名进行暴力模式猜解。

创新X-FI系列声卡使用指南

创新X-FI系列声卡使用指南

创新X-FI系列声卡K歌调试、设置、使用指南X-Fi产品系列K歌录歌最佳配置:声卡+话筒放大器(或者调音台)+电容话筒(或者动圈话筒)Sound Blaster X-Fi是创新继SBLive!、Audigy、Audigy2、Audigy4后最新一代产品。

X-Fi是创新最新的顶级声卡平台,主芯片CA20k1,拥有5千1百万个晶体管,提供10,000MIPS,等同于24个Sound Blaster Audigy 处理器的性能,高于30多个Live!处理器的处理能力。

还在高端产品Fatal1ty和Elite Pro上加载了大容量64M X-RAM声存,提高了整体的游戏加速和音频处理性能。

获得THX 认证,通过X-Fi Xtreme Fidelity顶级的24-bit Crystalizer,MP3音乐及影视都可以升级至Xtreme Fidelity的顶级效果。

创新发布的X-Fi共四款产品,定位从高到低情况如下:X-Fi Elite Pro:定位于专业市场,拥有高达116dB的信噪比,64MB在板X-RAM专用音频内存。

X-Fi Fatal1ty FPS :专为游戏玩家打造的声卡,以著名的FPS玩家Fatal1ty作为产品名称将吸引专业玩家。

109dB SNR,在板64MB X-RAM,支持EAX? ADVANCED HD 5.0,可加速游戏运行速度。

X-Fi Platinum:适用于多用途数字娱乐体验的声卡,109dB SNR,是欣赏音乐,电影的理想选择。

X-Fi XtremeMusic:109dB SNR,音乐和MP3文件回放的理想声卡。

普及版X-FI规格介绍:HP oem Xtreme muisc的PCB为单独设计,型号为SB0670,与其他SB0460 XtremeMuisc卡区别已知为:1、卡的上侧电容排列顺序不同2、右侧少两个芯片,有空位但是为了降低成本没有焊上去3、右侧无前置面板接口针脚,pcb虽有,但是为了降低成本没有焊,无法接前置面板,无可扩展性4、右侧少了一个电容,但是该位置多了一个4针接口,疑似面板接口,具体作用待了解确切再补充5、没有前置面板,甚至连接口都没有,即使刷成Platinum的EEPROM,一点实际意义都没有,而且PCB 电路和标准SB0460不同Dell oem XtremeMuisc的主卡不论PCB与芯片、零件型号,均与市场零售版XtremeMuisc一致,只是EEPROM 内部识别信息不同官方市场零售版Xtrememusic的主卡与Platinum的主卡完全一样,只是少一个内置盒子(I/O面板)。

FLIR Exx-Series 高分辨率热成像摄像头说明书

FLIR Exx-Series 高分辨率热成像摄像头说明书

Ergonomic new design forour most comfortable grip Separate Autofocus andImage Recording buttonsThis sleek new design isn’t just window-dressing. Fromthe rubberized, water-tight chassis to the scratch-resistantDragontrail ™ cover glass LCD, the new Exx-Series is madeto work hard all day long.HARD-WORKING DESIGN,FOR HARD-WORKING PROSLi-ion battery forextended use times Vibrant, 4” optically-bonded PCAP touchscreenBright LED work lights improve image clarity in dim areasSpeaker plays backvoice annotation Mic for voice annotation Scratch-resistantDragontrail TM cover glass FLIR Exx-Series ™5 MP digital camera now closerto thermal detector for superiorMSX ® enhancementsE75 | E85 | E95True 42° FOV for widearea surveys with asingle lensLaser pointer providesvisual guidanceLaser provides distancemeasurement and precise autofocusThe Best LensesNeed the Best AutofocusFLIR took its cue from the digital camera industry when re-engineering the Exx-Series focus system. Whether you choose autofocus or continuous focus, the camera’s precise laser-assisted focus and FLIR’s innovative lenses ensure you get crisp results, for the most accurate temperature readings.Exx-Series cameras are backed by FLIR’s industry-leading warranty 2 years: Full protection, parts, labor 5 years: Battery 10 years: Detector D E T E C T O R WA R R A N T Y *B AT T E R Y WA R R A N T Y *F U L L P R O D U C T WA R R A N T Y *TECHNICALSPECIFICATIONS Features by CameraE75E85E95IR Resolution320 x 240 (76,800 pixels)384 x 288 (110,592 pixels)464 x 348 (161,472 pixels)UltraMax ® Resolution307,200 pixels 442,368 pixels 645,888 pixels Object Temperature Range -20°C to 120°C (-4°F to 248°F) 0°C to 650°C (32°F to 1200°F) Optional 300°C to 1000°C (572°F to 1830°F)-20°C to 120°C (-4°F to 248°F) 0°C to 650°C (32°F to 1200°F) 300°C to 1200°C (572°F to 2192°F) -20°C to 120°C (-4°F to 248°F)0°C to 650°C (32°F to 1200°F) 300°C to 1500°C (572°F to 2732°F)Time-lapse (Infrared)No No 10 sec to 24 hours Laser Area Measurement No Yes Yes Spotmeter 1 in live mode 3 in live mode 3 in live mode Area No 3 in live mode 3 in live mode Common Features Exx-Series Detector Type and Pitch Uncooled microbolometer, 17 µm Thermal Sensitivity/NETD < 0.03°C @ 30°C (86°F)Spectral Range 7.5 - 14.0 µm Image Frequency 30 Hz Field of View (FOV)42° x 32° (10 mm lens), 24° x 18° (17 mm lens), 14° x 10° (29 mm lens)F-Number f/1.3, f/1.1Lens Identification Camera automatically identifies optional lenses without a factory calibration Focus Continuous, one-shot laser distance meter (LDM), one-shot contrast, manual Digital Zoom 1-4x continuous Image Presentation and Modes Display 4”, 640 x 480 pixel touchscreen LCD with auto-rotation Digital Camera 5 MP, 53° x 41° FOV Color PalettesIron, Gray, Rainbow, Arctic, Lava, Rainbow HC Image ModesInfrared, visual, MSX ®, Picture-in-Picture Picture-in-PictureResizable and movable MSX ®Embosses visual details on full resolution thermal image UltraMax ®Super-resolution process quadruples pixel count, activated in FLIR Tools+Measurement and Analysis Accuracy ±2°C (±3.6°F) or ±2% of reading for ambient temperature 15°C to 35°C (59°F to 95°F) andobject temperature above 0°C (32°F)Alarms Moisture alarm, insulation alarm, measurement alarmsColor Alarm (Isotherm)Above/below/interval/condensation/insulationLaser Distance Measurement Yes, on-screenMeasurement Presets No measurement, center spot, hot spot, cold spot, User Preset 1, User Preset 2Image Storage Storage Media Removable SD card (8 GB)Image File Format Standard radiometric JPEG, measurement data includedImage Annotations Voice 60 sec. via built-in mic or via BluetoothText Text from predefined list or touchscreen keyboardImage Sketch Yes, on infrared images onlyCompass, GPS Yes; automatic GPS image taggingMETERLiNK ®Yes; several readingsVideo Recording and Streaming Radiometric IR Video Recording Real-time radiometric recording (.csq)Non-Radiometric IR or Visual Video H.264 to memory cardRadiometric IR Video Streaming Yes, over UVC or Wi-FiNon-Radiometric IR Video Streaming H.264 or MPEG-4 over Wi-FiMJPEG over UVC or Wi-FiCommunication Interfaces USB 2.0, Bluetooth, Wi-FiVideo Out DisplayPort over USB Type-CAdditional Data Battery Type Li-ion battery, charged in camera or on separate chargerBattery Operating Time Approx. 2.5 hours at 25°C (77°F) ambient temperature and typical useOperating Temperature Range –15°C to 50°C (5°F to 122°F)Storage Temperature Range –40°C to 70°C (-40°F to 158°F)Shock/Vibration/ Encapsulation; Safety 25 g / IEC 60068-2-27, 2 g / IEC 60068-2-6, IP 54 /IEC 60529; EN/UL/CSA/PSE 60950-1Weight/Dimensions w/o Lens 1 kg (2.2 lbs), 27.8 x 11.6 x 11.3 cm (11.0 x 4.6 x 4.4 in)Box Contents Infrared camera with lens, battery (2 ea), battery charger with power supply, front lens and lightprotection, straps (hand and wrist), lanyards, lens caps (front and rear), lens cleaning cloth, 15 W3A power supply, printed documentation, 8 GB SD card, Torx screwdriver, cables (USB 2.0 A toUSB Type-C, USB Type-C to HDMI, USB Type-C to USB Type-C)LEARN MORE ABOUT EXX-SERIES CAMERAS AT /EXX-BUILDINGFLIR Exx-Series ™The Infrared Training Center The greater your knowledge about thermal imaging, the greater the dividends you’ll realize for your company and your career. That’s why the Infrared Training Center (ITC) offers classes for practically every application, from free online courses to advanced training that can certify you as a thermography expert, qualifying you to take a leadership role in your internal IR program. ITC classes include: • Thermography Fundamentals Training • IR Building Inspection • IR Roofing Inspection Thermography Certification Training Level I certifies that you know how a thermal imager works and how to use it. Level II cranks your credibility up a notch with more in-depth concepts and intensive labs. Level III asserts that you have knowledge and skills to administer your company’s thermography program. These certifications offer strong validation to support the work you do as a thermographer. Mobile Training Units and on-site training at your facility are encouraged if you would like to certify a group of 10 or more. For a complete list and schedule of courses andmore information, visit or call 1.866.872.4647.。

FLIR Exx-Series 热成像相机产品说明

FLIR Exx-Series 热成像相机产品说明

S P E C I F I C A T I O N SEq US GoDi US l Im Sp FLIR Sy In Al I NS-E BLDCORPORATE HEADQUARTERS L IR Sy In SW Pa Av OR 9PH: LATIN AMERICA L IR Sy Av An So SP 1PH: CHINAL IR Sy Co Lt Rm To II Ce Pl Sh Ru Co Rd Sh Ne Te Ho PH: EUROPE L IR Sy In Lu Me PH: NASDAQ: L IRSpecifications are subject to change without notice. For the most up-to-date specs, go to *Hot spot to center spot Delta measurement Features By CameraE53E75E85E95IR Resolution 240 180 (43,200 pixels)320 240 (76,800 pixels)384 288 (110,592 pixels)464 348 (161,472 pixels)UltraMax fi307,200 pixels442,368 pixels645,888 pixelsObject Temperature Range-20 C to 120 C (-4 F to 248 F)0 C to 650 C (32 F to 1200 F)-20 C to 120 C (-4 F to 248 F)0 C to 650 C (32 F to 1200 F)Optional300 C to 1000 C (572 F to 1830 F)-20 C to 120 C (-4 F to 248 F)0 C to 650 C (32 F to 1200 F)300 C to 1200 C (572 F to 2192 F)-20 C to 120 C (-4 F to 248 F)0 C to 650 C (32 F to 1200 F)300 C to 1500 C (572 F to 2732 F)FocusManual Continuous, one-shot laser distance meter (LDM), one-shot contrast, manualContinuous, one-shot laser distance meter (LDM), one-shot contrast, manualContinuous, one-shot laser distance meter (LDM), one-shot contrast, manualField of View (FOV)24 18 42 32 (10 mm lens), 24 18 (18 mm lens), 14 10 (29 mm lens)42 32 (10 mm lens), 24 18 (18 mm lens), 14 10 (29 mm lens)42 32 (10 mm lens), 24 18 (18 mm lens), 14 10 (29 mm lens)Lens Identi cation Automatic Automatic Automatic Time-lapse (Infrared) 10 sec to 24 hours Laser Area MeasurementYesYesLaser Distance MeasurementYes, on-screenYes, on-screenYes, on-screenMeasurement Presets No measurement, center spot, hot spot, cold spot, 3 spots, hot spot-spot*No measurement, center spot, hot spot, cold spot, User Preset 1, User Preset 2No measurement, center spot, hot spot, cold spot, User Preset 1, User Preset 2No measurement, center spot, hot spot,cold spot, User Preset 1, User Preset 2Spotmeter 3 in live mode 1 in live mode 3 in live mode 3 in live mode Area1 in live mode1 in live mode 3 in live mode 3 in live mode Picture-in-PictureCentered infrared area on the visual imageResizable and movableResizable and movableResizable and movableCommon FeaturesDetector Type and Pitch Uncooled microbolometer, 17 m Thermal Sensitivity/NETD <0.04 C @ 30 C (86 F), 24 lens Spectral Range 7.5 - 14.0 m Image Frequency 30 Hz F-Number f/1.3, 24 lens Digital Zoom 1-4x continuousImage Presentation and ModesDisplay 4 , 640 480 pixel touch screen LCD with auto-rotation Digital Camera 5 MP, 53 41 FOVColor Palettes Iron, Gray, Rainbow, Arctic, Lava, Rainbow HC Image Modes Infrared, visual, MSX fi, Picture-in-PictureMSX fiEmbosses visual details on full resolution thermal image Measurement and AnalysisAccuracy –2 C (–3.6 F) or –2% of reading for ambient temperature 15 C to 35 C (59 F to 95 F) and object temperature above 0 C (32 F)AlarmsMoisture, insulation, and measurement Color Alarm (Isotherm)Above/below/interval/condensation/insulation Compass, GPS Yes; automatic GPS image tagging METERLiNK fiYes; several readings Laser PointerYes; dedicated buttonImage StorageStorage Media Removable SD card (8 GB)Image File Format Standard JPEG with measurement data included Video Recording and StreamingRadiometric IR Video RecordingReal-time radiometric recording (.csq)Non-Radiometric IR or Visual VideoH.264 to memory card Radiometric IR Video StreamingYes, over UVC or Wi-FiNon-Radiometric IR Video StreamingH.264 or MPEG-4 over Wi-Fi; MJPEG over UVC or Wi-Fi Communication Interfaces USB 2.0, Bluetooth, Wi-Fi, DisplayPort Video OutDisplayPort over USB Type-CAdditional DataBattery TypeLi-ion battery, charged in camera or on separate charger Battery Operating Time Approx. 2.5 hours at 25 C (77 F) ambient temperature and typical useOperating Temperature Range -15 C to 50 C (5 F to 122 F)Storage Temperature Range -40 C to 70 C (-40 F to 158 F)Shock/Vibration/Encapsulation; Safety 25 g / IEC 60068-2-27, 2 g / IEC 60068-2-6, IP 54 /IEC 60529; EN/UL/CSA/PSE 60950-1Weight/Dimension1 kg (2.2 lbs), 27.8 11.6 11.3 cm (11.0 4.6 4.4 in)Box ContentsInfrared camera with lens, battery (2 ea), battery charger, front protection, straps (hand, wrist), hard transport case, lanyards, lens caps, lens cleaning cloth, power supplies, 8 GB SD card, Torx wrench, cables (USB 2.0 A to USB Type-C, USB Type-C to USB Type-C, USB Type-C to HDMI)。

AFL FLX380 FlexTester3 系列产品说明书

AFL FLX380 FlexTester3 系列产品说明书

3 or (800) 321-5298, (603) 528-7780© 2013, AFL, all rights reserved. FLX3-3X-2000 Revision 1C 2013-09-30Specifications are subject to change without notice.FLX380 MODELS FEATURES-300-302-303-304Compatible with all NOYES optical power meters and laser sources, including tone and Wave ID features Compatible with NOYES optical fiber identifiers (OFI)Integrated high-power optical power meter with Wave ID and tone detection Integrated Visual Vault Locator (VFL with visible red laser)1310 nm – OTDR, PON OTDR, laser source (CW, Wave ID, tone generation)1550 nm – OTDR, PON OTDR, laser source (CW, Wave ID, tone generation)1490 nm – OTDR, PON OTDR, laser source (CW, Wave ID, tone generation)1625 nm – FTTx Live PON OTDR with 1625 nm filtered detector for in-service PON testing 1650 nm – FTTx Live PON OTDR with 1650 nm filtered detector for in-service PON testingFTTx PON Power Meter (Detects and measures downstream 1490 and/or 1550 nm PON power levels)Features and Applications by ModelFLX380 MODELS FIBER TESTING APPLICATIONS -300-302-303-304Point-to-point fiber optic cable installation test and troubleshootingVerify end-to-end length, loss and return loss. Verify splice and connector loss and reflectance. Locate source of excess loss and/or reflections, including micro- or macro-bends.FTTx PON construction testTest to or through splitters. Verify end-to-end length, loss and return loss. Verify splitter, splice and connector loss and reflectance. Locate source of excess loss and/or reflections, including micro- or macro-bends. aFTTx customer fiber troubleshooting – dark fibersLocate cable cuts, open splices, micro- or macro-bends and bad connections FTTx in-service (Live PON) troubleshootingAutomatically detect live PONs. Prevent service-disrupting 1310/1550 nm OTDR tests on live PONs. Locate macro bends, poor splices or high-loss connections without disrupting service to active PON subscribers.FTTx service turn-up (commissioning)Verify PON power levels at the ONT (subscriber) location. Locate faults in distribution or drop cables, or between splitters in PONs built using distributed splitter architecture, all without disrupting service to active PON subscribers.Note:a. Adds 1490 nm OTDR and OLS. Testing at 1310 / 1550 nm is recommended and typically all that is needed to test FTTx PONs during construction.FLX380-303 and -304 modelsFLX380-300 and -302 models FLX380-303, 304FLX380-300, -302Visual Fault LocatorVisual Fault LocatorOptical Power Meter Optical Power Meter Dark Fiber OTDR Dark Fiber OTDR Live Fiber OTDR PON Power MeterLaser Source Laser SourceFLX380-30x FlexTester 3 OTDR or (800) 321-5298, (603) 528-7780includes the DFS1 Digital FiberScope, hand-held DFD1 Touchscreen Tablet for viewing connector end-faces, plus UPC or APC inspection adapter tips (depending on selected OTDR ferrule type). It enables inspection of both the ferrule ends of male connectors and the end-faces of connectors mounted inside bulkhead adapters on equipment panels. FOCIS PRO includes image capture, save, AFL’s unique image-pairing capability, plus IEC and user-adjustable pass/fail analysis. FlexTester Click cleaners for common 2.5 and 1.25 mm connectors, along with cleaning fluid and cleaning sticks for more stubborn contamination.With the FOCIS PRO’s dedicated Touchscreen Tablet, the FLX380 is always available for OTDR and optical loss testing.The FLX380, FOCIS PRO kit, accessories and cleaning supplies are packaged in a waterproof, rugged hard carry case. The carry case also accommodates commonaccessories, such as a single-mode launch fiber ring (FR1-SM) or Optical Fiber Identifier (OFI-400), ordered separately.FLX380 FlexTester PRO Test and Inspection kitFLX380 FlexTester in Soft Carry CaseFLX380 FlexTester 3 Complete FTTx Installation and Maintenance Test KitSelect a FlexTester 3 Complete kit for an even more complete broadband network installation and maintenance test solution.FlexTester 3 Complete kits combine an OFI-200D Optical Fiber Identifier and 150 m singlemode fiber ring (launch cable) with a user-selected FLX380-30x, FOCIS PRO, UPC or APC adapter tips, two One-Click cleaners and standard FlexTester rugged carry case used for FlexTester PRO kits. The carry case includes room for additional cleaning supplies and an additional fiber ring (receive cable).PRO and FlexTester 3 Complete kits save money and organize and protect commonly required test sets and accessories in a single lightweight, waterproof carry case.FLX380 FlexTester 3 in Soft Carry CaseFLX380 FlexTester 3 kits are also available in a soft carry case, which includes the user-selected FLX380, standard accessories, and One-Click cleaner.5 or (800) 321-5298, (603) 528-7780© 2013, AFL, all rights reserved. FLX3-3X-2000 Revision 1C 2013-09-30Specifications are subject to change without notice.OTDR (POINT-TO-POINT, PON, LIVE PON)Emitter Type Laser Safety Class Class 1 FDA 21 CFR 1040.10 and 1040.11, IEC60825-1: 2007-03Fiber Type Single-mode Available Wavelengths 1310 / 1490 / 1550 / 1625 / 1650 nm Wavelength Tolerance ±20 / ±20 / ±20 / ±10 / ±10 nmDynamic Range (SNR=1)b41 / 38 / 41 / 38 / 38 dB (20 µs pulse)22 / 19 / 22 / 19 / 19 dB (100 ns pulse)Event Dead Zone c0.8 m Attenuation Dead Zone d 2.5 mPON Dead Zone e30 m Pulse widths 5, 10, 30, 100, 300 ns; 1, 3, 10, 20 µs Range Settings 250 m to 240 km Data PointsUp to 30,000Data Point Spacing 5.0 cm (range <1.5 km);Range/30,000 (range >1.5 km)Group Index of Refraction 1.4000 to 1.7000Distance Uncertainty (m)±(1 + 0.005% x distance + data point spacing)Linearity±0.05 dB/dBTrace File Format Telcordia SR-4731 Issue 2Trace File Storage Medium 4 GB internal memory (>1000 traces)Data Transfer to PC USB cable or Bluetooth ® wireless PON OTDR Modes To Splitter, Through Splitter, Expert Standard OTDR ModesFull Auto, Expert, Real TimeOPTICAL POWER METER Calibrated Wavelengths 1310, 1490, 1550, 1625, 1650 nm Detector TypeInGaAsMeasurement Range +23 to -50 dBm Tone Detect Range +3 to -35 dBm Wavelength ID Range +3 to -35 dBm Accuracy h ±0.25 dB Resolution0.01 dBMeasurement UnitsdB, dBm or Watts (nW, µW, mW)PON POWER METER FOR SINGLE-MODE ONLY Calibrated Wavelengths 1490, 1550 nm Detector Type Filtered InGaAs Isolation>40 dBMeasurement Range +23 to -50 dBm Accuracy g ±0.5 dB Resolution0.01 dBMeasurement UnitsdBm or Watts (nW, µW, mW)OPTICAL LASER SOURCE (OLS)Emitter Type, Safety Class Class I, FDA 21 CFR 1040.10 and 1040.11,IEC 60825-1: 2007-03Fiber Type Single-mode Available Wavelengths 1310, 1490, 1550, 1625, 1650 nm Wavelength Tolerance ±20 nm (1310/1490/1550)±10 nm (1625/1650)Spectral Width (FWHM) 5 nm (maximum)Internal Modulation 270 Hz, 330 Hz, 1 kHz, 2 kHz, CW Wave ID (one, two, or three wavelengths)Compatible with NOYES Optical Power Meters and Light SourcesOutput Power Stability f±0.2 dB Output Power -1 dBm ±1.5 dB VISUAL FAULT LOCATOR (VFL)Emitter Type Visible red laser, 650 ±20 nm Safety Class Class II FDA 21 CFR 1040.10 and 1040.11,IEC 60825-1: 2007-03Output Power (nominal)0.8 mW into single-mode fiber Modes CW, 2 Hz flashing GENERALSize (in boot)20.1 x 13.0 x 5.3. cm (7.9 x 5.1 x 2.1 in)Weight0.8 kg (1.8 lb)Operational Temperature -10 °C to +50 °C, 0 to 95 % RH (non-condensing)Storage Temperature -20 °C to +60 °C, 0 to 95 % RH (non-condensing)Power Rechargeable Li-Ion or AC adapter Battery Life 13.5 hours, Telcordia test conditions 12.5 hours, backlight on, continuous test DisplayLCD, 320 x 240, 3.5 in (89 mm), color, high-contrast transflective with backlight and AR coating.Specifications aNotes:a. All specifications valid at 25 °C unless otherwise specified.b. Measured using 240 km range, 20 µs pulse and 3 min averaging.c. Typical distance between the two points 1.5 dB down each side of a reflective spike caused by a -45 dB event using 5 ns pulse width.d. Typical distance from the location of a -45 dB reflective event to the point where the trace falls and stays within 0.5 dB of backscatter, using a 5 ns pulse width.e. Typical distance from the start of a 1x16 splitter (13 dB loss) to the point where the trace falls and stays within 0.5 dB of backscatter, using a 100 ns pulse width with high resolution.f. Over 8 hours.g. At calibration wavelengths and power levels of approximately -5 dBm for 1550 nm and -10 dBm for 1490 nm.h. At 1310/1550 nm wavelengths with CW power level of approximately -10 dBm.FLX380-30x FlexTester 3 OTDR6 or (800) 321-5298, (603) 528-7780© 2013, AFL, all rights reserved. FLX3-3X-2000 Revision 1C 2013-09-30Specifications are subject to change without notice.NOYES International Sales and Service Contact InformationAvailable at /NOYES/ContactsCalibration PlansAFL recommends annual calibrations on NOYES Test and Inspection products. Prepaid Cal plans offer two annual calibrations at a discounted price, a convenient calibration expiration email service, express calibration services and access to the NOYES product knowledge base. Cal Plus plans offer the same services as the Cal plans with the addition of a two year extended warranty (three years total coverage).FLX380 MODEL 2 YR CAL PLAN, 2 YR CAL PLUS PLAN AFL NO.AFL NO.FLX380-300CAL2-00-FLX3-300CAL2-01-FLX3-300FLX380-302CAL2-00-FLX3-302CAL2-01-FLX3-302FLX380-303CAL2-00-FLX3-303CAL2-01-FLX3-303FLX380-304CAL2-00-FLX3-304CAL2-01-FLX3-304Available AccessoriesDESCRIPTIONAFL NO.FC adapter for OTDR / OLS port 2900-50-0002MR SC adapter for OTDR / OLS port 2900-50-0003MR ST adapter for OTDR / OLS port 2900-50-0004MR LC adapter for OTDR / OLS port 2900-50-0006MR FC adapter for OPM port 2900-52-0001MR SC adapter for OPM port 2900-52-0002MR ST adapter for OPM port 2900-52-0003MR LC adapter for OPM port2900-52-0004MR 2.5 mm Universal adapter for OPM port 2900-52-0005MR 1.25 mm Universal adapter for OPM port 2900-52-0006MR 2.5 mm Universal adapter for VFL port 2900-53-0001MR 1.25 mm Universal adapter for VFL port 2900-53-0002MR Fiber Ring, Single-mode, 150 m (492 ft)FR1-SM-150-y1-y2Fiber Ring, Single-mode, 500 m (1640 ft)FR1-SM-500-y1-y2Fiber Ring, Single-mode, 1000 m (3280 ft)FR1-SM-1000-y1-y2y1, y2 – connectors for single-mode cables, specify type as follows:ST, SC, ASC (angled SC), FC, AFC (angled FC), LCOther connector types, fiber types, and fiber lengths quoted upon request.FLX380-30x FlexTester 3 OTDROrdering InformationFLX380 PRO kits include hard carry case, FOCIS PRO kit, and cleaning supplies. FlexTester 3 Complete kits add fiber ring and OFI-200D Optical Fiber Identifier. FLX380 with soft carry case option includes a 2.5 mm One-Click cleaner. All FLX380 FlexTester 3 models come with (1) SC adapter for the OTDR/OLS port, (1) 2.5 mm OPM port universal adapter, (1) 2.5 mm VFL port universal adapter, USB cable (connects with Type A USB port on your PC), TRM 2.0 Basic software, rechargeable, replaceable Li-Ion battery and AC adapter with power cord. Select options as follows: Optical Configuration (NNN), OTDR port type (F), Language Package (LLL), optional PRO kit configuration. Example: FLX380-303U-ENG-PRO indicates a three-wavelength (1310/1550/1625 nm) FLX380 FlexTester 3 with UPC OTDR port ferrule, English / Euro language package with English QRG, PRO Kit configuration with FOCIS PRO and cleaning supplies.OTDR Port Ferrule (F)A = APC U = UPCFlexTester 3 Kit Options (KIT):(Absent) = Standard kit PRO = F lexTester 3 PRO Kit CMP = F lexTester 3 Complete KitQuick Reference Guide Language (LLL)Optical Configuration (NNN)300 = 1310/1550 nm302 = 1310/1490/1550 nm303 = 1310/1550/1625 nm, Live PON OTDR, PON Meter 304 = 1310/1550/1650 nm, Live PON OTDR, PON Meter NNNFLLLKITFLX380ENG = EnglishCHS = Chinese, Simplified CHT = Chinese, Traditional DEU = GermanFRA = French ITA = Italian JPN = Japanese KOR = KoreanPOL = Polish POR = Portuguese SPA = Spanish TUR = Turkish。

FLIR X6000sc系列热成像相机产品说明书

FLIR X6000sc系列热成像相机产品说明书

FLIR X6000sc Series thermal imaging cameras provide superior thermal measurement performance paired with the most advanced connectivity. Whether you need to analyze high-speed processes with microsecond precision, or monitor fast temperature spikes, these cameras have theintegration time and frame speed needed to collect the most accurate data. In addition, the X6000sc Series offers state-of-the-art connectivity and an intuitive user experience, so researchers can focus on their experiments instead of on camera controls.High Sensitivity Thermal ImagingThe X6540sc, X6580sc and X6581sc are equipped with cooled indium antimonide detectors that can detect temperature differences of less than 25 mK, or as small as 1 mK by using measurement techniques such as lock-in thermography. The camera produces temperature measurements with an accuracy of ±1°C/1% and boasts a wide temperature range that it automatically adjusts to best fit the thermal scene. Add an optional filter to the motorized 4-slot filter wheel to uncover hidden spectral detail, or attach a close-up lens to resolve details as small as 3 µm.Ultra-Fast Frame RatesX6000sc cameras produce crisp, 640 x 512 full-frame imagery at up to 355 Hz, with the short integration time needed to accurately measure high speed processes. User-defined subwindowing allows for even faster frame rates, up to 4500 Hz. View thermal imagery live on the detachable touchscreen LCD monitor, or stream high-speed data to a computer for live viewing, analysis, or recording.Connectivity and CompatibilityThis camera works seamlessly with the supplied FLIR ResearchIR Max software for both viewing and processing thermal data. Connect over Camera Link Medium for full-bandwidth data acquisition, Gigabit Ethernet for simple connectivity, or standard BNC for frequently-used features such as detector sync, acquisition trigger, and analog lock-in input.Key Features• Indium antimonide (InSb) detector• Excellent image quality: 640 x 512 pixels • Frame rates up to 4500 Hz with windowing • Removable touchscreen LCD• Range of connectivity options including Camera Link and Gigabit Ethernet • Motorized 4-position filter wheel • Optional temperature calibrationFLIRX6000sc SeriesHigh-Speed MWIR Performance CameraElectronic board, wafer and cells inspectionFast integration time allows the X6000sc Series cameras accurately record rapid temperature shiftsRolling tire structure thermal evaluationTouchscreen LCD- microSD slot - USB port - DVI port Camera Link Base / MediumGigibit Ethernet Digital & analog I/OsIR remoteAuxiliary connectorStatus LEDs Power button /scienceSpecificationsEquipment described herein may require US Government authorization for export purposes. Diversioncontrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. ©2016 FLIR Systems, Inc. All rights reserved. (Dec 1) 16-1175 NASDAQ: FLIRPORTLANDCorporate Headquarters FLIR Systems, Inc.27700 SW Parkway Ave. Wilsonville, OR 97070 PH: +1 866.477.3687BELGIUMFLIR Systems Trading Luxemburgstraat 2 2321 Meer Belgium PH: +32 (0) 3665 5100SWEDENFLIR Systems AB Antennvägen 6 PO Box 7376SE-187 66 Täby, Sweden PH: +46 (0)8 753 25 00UNITED KINGDOM FLIR Systems UK2 Kings Hill Ave., Kings Hill West Malling, Kent ME19 4AQUnited KingdomPH +44 (0)1732 220 011NASHUAFLIR Systems, Inc. 9 Townsend West Nashua, NH 03063 PH: +1 866.477.3687CANADAFLIR Systems, Ltd. 920 Sheldon CourtBurlington, ON L7L 5K6 CanadaPH: +1 800.613.0507LATIN AMERICAFLIR Systems Brasil Av. Antonio Bardella,320 Sorocaba, SP 18085-852 BrasilPH: +55 15 3238 7080CHINAFLIR Systems Co., Ltd Rm 1613-16, Tower II Grand Central Plaza 138 Shatin Rural Committee Rd. Shatin, New Territories Hong KongPH: +852 2792 8955Specifications are subject to change without notice.For the most up-to-date specifications, go to 。

FP-X手册

FP-X手册

可编程控制器晶体管输出型新登场脉冲输出功能内置4轴。

2轴直线插补时,2组可同时进行!●本目录的监控器画面全部是由嵌入合成的。

AFPX-C60(已安装扩展插件的状态)AFPX-C30(已安装扩展插件的状态)AFPX-C14(已安装扩展插件的状态)小型PLC内,通过高速处理速度0.32μsec,也可对应要求高速扫描的用途。

※1 基本指令占35%和高级指令(数据转送、四则运算)占65%组合而成的5K步的程序。

小型机身内置了4轴高速脉冲输出功能。

2轴直线插补时,2组可同时进行。

凸轮的电子化控制、单元化生产设备及液晶定位的XY平台+Z轴控制、纸箱及热交换导管的立体弯曲加工、小型线圈的高密度绕线机等生产设备中所需的伺服电机、步进电机等的款式将越来越丰富,并趋向于多轴化设计。

其中的FP-X把4轴脉冲输出功能内置于小型机身中,成为既可节省空间又可降低成本又可进行多轴控制,且适用于小型设备控制的小型通用PLC。

超高速处理简单温度控制指令(F356 EZPID)MEWTOCOL主站功能追加Ethernet插件(近期销售)跟踪功能基本指令只需0.32μs,可快速扫描。

(例:5K步※1时,为1.9ms)可靠的安全性通过8位密码和禁止上传功能,有效保护程序。

配备USB端口※3通过普通USB电缆(AB型),可与计算机实现简便连接。

※3 C14型未具备此功能(C14为3轴)新功能晶体管输出型新登场通过超过小型PLC范畴的高程序容量32K步,可对应随着将来设备扩展而产生的范围广泛的各种应用。

※2 C14型为16k步充裕的大容量充裕的程序容量达到32K步。

注释区域也可以充分保证。

※2针对客户的“逐步扩展”的要求,可通过扩展插件,轻松地提高性能。

也可控制成本。

还有,利用扩展FP0适配器,最多可连接3台现有的FP0扩展单元。

广泛的扩展性I/O最多300点。

可通过功能扩展插件,使扩展范围更进一步扩大。

商品新阵容控制单元(样机:30点继电器输出型AFPX-C30R )I/O 状态监控LED扩展单元(样机:16点继电器输出型AFPX-E16R )功能扩展插件(样机:模拟量输入插件AFPX-AD2)扩展插件接口部盖扩展插件连接用连接器电池连接用连接器输入端子电源端子输出端子RUN/PROG.模式切换开关可调电位器输入RS232C 编程口(DC 电源型时无辅助电源输出)24VDC 辅助电源输出端子 C14:0.15A C30,C60:0.4AUSB 通信端口(C14R 除外)I/O 状态监控LED扩展单元连接用连接器固定用螺钉孔扩展单元连接用连接器扩展单元连接用连接器扩展单元连接用连接器2层安装用连接器※通信插件可在第2层安装输入输出端子或通信用信号端子输入端子输出端子具有优良扩展性的产品系列,能满足各种各样的要求。

智能数字调节仪使用说明书

智能数字调节仪使用说明书

6E4x{51, X++e)k64rt-trkik-E sp it1 *" ", ILE +6
*BFI
fiE,*{^,\ fr *+ fi b4\h&4i J..nhika-,at&rfih * Fi tr 4?" *"KE AV4x&#t +erk6 4*-EFkikE,nl6rI fr?,&. tt ^Tffitu#t?K. *.zNrl4,624.tu-fr4+. i3il-E&.lr,al? t WiK+*4F. K,
-3-
*r?e.*&fregflx
{E ffi ifl Ffir
8.. figftEj(
rtR.l€:M " &TlLl€EInt^tA.R.x+" EnXn
€HftfJqTftl, r'l+6€ 14 4t*T.&- T't*,&-,4iAr?.Ui*T tl:ikp-t?.', FiiA.E &&&xtgtx-+.
111 , n_tj.*-+$ r 4.* , &Fl t6l&Ti^&., fr '4-ho.16 + t\" T'lt'{i. Ex'l€*R,S ftf izlf=,zl+n**$kfln (i{. n, g,f6lsP *F*r/ffi*%, ffi,\it 4zA%) 1], €€4€: @ aitR.*R* T+*-Ti^+*., nkfutz&
+ . & n P f frft,EA, ? +fffixe+#8" tz&*vL+, ixfrn&, ,t 2, *n7 4fi,4|'i9.-n+'.

HF-LPD1X0 Wi-Fi 模块用户手册说明书

HF-LPD1X0 Wi-Fi 模块用户手册说明书

HF-LPD1X0系列802.11a/b/g/n Wi-Fi模组用户手册V 1.1产品特点✧支持 802.11 a/b/g/n 无线标准,支持2.4GHz和5GHz双频工作✧采用Andes Core,主频最高160MHz,192KB RAM, 2MB Flash ✧支持UART数据通讯接口✧支持STA/AP工作模式✧支持Sniffer抓包方式SmartLink V8配网功能✧支持SoftAP方式SmartAPLink 配网功能✧支持微信Airkiss 2.0✧支持无线和远程升级固件,提供无线批量配置工具✧可提供SDK开发包,支持二次开发✧支持不同类型的天线选项◼HF-LPD100:内置PCB天线或者外置3代IPEX接口◼HF-LPD130:外置1代IPEX接口✧ 3.3V 单电源供电✧尺寸:◼HF-LPD100:23.1mm x 32.8mm x 3.5mm,SMT48封装◼HF-LPD130:22mm x 14.3mm x 8mm, DIP10封装✧FCC/CE/SRRC/RoHS 认证(TBD)目录图目录 (7)表目录 (9)历史记录 (10)1.产品概述 (11)1.1.概述 (11)1.1.1主要应用领域 (11)1.1.2模块基本参数 (12)1.2.硬件介绍 (13)1.2.1.HF-LPD100管脚定义 (14)1.2.2.HF-LPD130管脚定义 (15)1.2.3.电气特性 (17)1.2.4.HF-LPD100机械尺寸 (18)1.2.5.HF-LPD130机械尺寸 (18)1.2.6.HF-LPD100内置天线 (19)1.2.7.外置天线 (20)1.2.8.开发套件 (20)1.2.9.产品编号 (21)1.3.典型应用 (23)1.3.1.UART应用硬件连接 (23)2.功能描述 (24)2.1.无线组网 (24)2.1.1.基于AP的无线组网 (24)2.1.2.基于STA的无线网络 (24)2.2.工作模式:透明传输模式 (25)2.3.加密 (25)2.4.参数设置 (25)2.5.固件升级 (26)2.6.双SOCKET通信功能 (26)2.7.TCP Server时多TCP链路连接 (26)2.8. 2.4G和5G 双频 (27)3.设置及使用指南 (29)3.1.默认参数介绍 (29)3.1.1. 打开管理网页 (29)3.1.2. 系统信息页面 (29)3.1.3. 模式选择页面 (30)3.1.4. STA设置页面 (30)3.1.5. AP设置页面 (32)3.1.6. 其他设置页面 (32)3.1.8. 软件升级页面 (33)3.1.9. 重启模组页面 (34)3.1.10. 恢复出厂页面 (34)3.1.11. 内部网页 (35)3.2.模块使用介绍 (35)3.2.1.软件调试工具 (35)3.2.2.网络连接 (35)3.2.3.初始参数 (36)3.2.4.调试模块 (36)3.3.应用举例 (38)3.3.1.无线遥控应用 (38)3.3.2.远程连接应用 (38)3.3.3.透明串口 (38)4.AT指令说明 (40)4.1.模块运行模式配置 (40)4.1.1.从透传模式切换到命令模式 (40)4.1.2.透传模式下发送AT指令 (41)4.2.AT+指令集概述 (41)4.2.1.命令格式 (42)4.2.2.指令集 (43)4.2.2.1.AT+E (44)4.2.2.2.AT+CMDPW (45)4.2.2.3.AT+WMODE (45)4.2.2.4.AT+ENTM (45)4.2.2.5.AT+TMODE (45)4.2.2.6.AT+MID (46)4.2.2.7.AT+VER (46)4.2.2.8.AT+RELD (46)4.2.2.9.AT+FCLR (46)4.2.2.10.AT+Z (47)4.2.2.11.AT+H (47)4.2.2.12.AT+CFGTF (47)4.2.2.13.AT+UART (47)4.2.2.14.AT+PING (48)4.2.2.15.AT+NETP (48)4.2.2.16.AT+MAXSK (49)4.2.2.17.AT+TCPLK (49)4.2.2.18.AT+TCPTO (49)4.2.2.19.AT+TCPDIS (49)4.2.2.20.AT+SEND (50)4.2.2.21.AT+RECV (50)4.2.2.22.AT+SOCKB (50)4.2.2.23.AT+TCPDISB (51)4.2.2.25.AT+TCPLKB (51)4.2.2.26.AT+SNDB (52)4.2.2.27.AT+RCVB (52)4.2.2.28.AT+UDPLCPT (52)4.2.2.29.AT+WSSSID (52)4.2.2.30.AT+WSKEY (53)4.2.2.31.AT+WANN (53)4.2.2.32.AT+WSMAC (54)4.2.2.33.AT+WSLK (54)4.2.2.34.AT+WSLQ (54)4.2.2.35.AT+WSCAN (54)4.2.2.36.AT+LANN (55)4.2.2.37.AT+WAP (55)4.2.2.38.AT+WAKEY (55)4.2.2.39.AT+WADHCP (56)4.2.2.40.AT+WALK (56)4.2.2.41.AT+WALKIND (56)4.2.2.42.AT+WAPMXSTA (57)4.2.2.43.AT+MDCH (57)4.2.2.44.AT+OTA (57)4.2.2.45.AT+UPURL (58)4.2.2.46.AT+DISPS (58)4.2.2.47.AT+PLANG (58)4.2.2.48.AT+WEBU (59)4.2.2.49.AT+WRMID (59)4.2.2.50.AT+ASWD (59)4.2.2.51.AT+SMTLK (60)4.2.2.52.AT+NDBGL (60)4.2.2.53.AT+TYPE (60)4.2.2.54.AT+SMEM (60)4.2.2.55.AT+WIFI(保留) (61)4.2.2.56.AT+WFREQ (61)4.2.2.57.AT+SMARTAPCONFIG (61)4.2.2.58.AT+SMARTAPSTART (62)5.包装信息 (63)5.1.推荐的回流焊温度曲线 (63)5.2.操作说明 (63)5.3.HF-LPD100出货包装 (64)附录 A: 硬件参考设计 (65)附录 B: HTTP协议传输 (66)B.1. 透传方式发送HTTP请求实例 (66)附录C:参考资料 (68)C.1.汉枫生产测试工具 (68)C.2.SmartLink V8抓包一键配置工具 (68)C.3.SmartAPLink (68)C.4.Firmware (68)C.5.SDK (68)附录D: 汉枫联系方式 (69)图目录Figure 1.HF-LPD100 外观图 (13)Figure 2.HF-LPD130 外观图 (13)Figure 3.HF-LPD100 管脚定义 (14)Figure 4.HF-LPD130 管脚定义 (15)Figure 5.HF-LPD100 机械尺寸 (18)Figure 6.HF-LPD130 机械尺寸 (19)Figure 7.HF-LPD100模组建议放置区域 (20)Figure 8.HF-LPD100开发板 (20)Figure 9.HF-LPD100产品编号定义 (21)Figure 10.HF-LPD130产品编号定义 (22)Figure 11.HF-LPD100 UART应用硬件连接 (23)Figure 12.基本的HF-LPD100无线组网结构 (24)Figure 13.HF-LPD100的 AP+STA组网结构 (24)Figure 14.双Socket设置命令 (26)Figure 15.双Socket数据流向示意图 (26)Figure 16.多TCP链接数据传输图示 (27)Figure 17.周边AP扫描结果 (27)Figure 18. 2.4G环境 (28)Figure 19.5G环境 (28)Figure 20.打开管理网页 (29)Figure 21.系统信息页面 (30)Figure 22.模式选择页面 (30)Figure 23.STA设置页面 (31)Figure 24.STA网页搜索用户路由器界面 (31)Figure 25.AP设置页面 (32)Figure 26.其他设置页面 (32)Figure 27.账号管理页面 (33)Figure 28.软件升级页面 (33)Figure 29.重启模组页面 (34)Figure 30.恢复出厂页面 (34)Figure 31.内部升级 (35)Figure 32.STA接口连接调试 (35)Figure 33.AP接口连接调试(保留) (36)Figure 34.“CommTools” 串口调试工具 (36)Figure 35.“TCPUDPDbg” 创建连接 (37)Figure 36.“TCPUDPDbg” 设置 (37)Figure 37.“TCPUDPDbg” 连接 (37)Figure 38.无线摇控应用图示 (38)Figure 39.远程连接应用图示 (38)Figure 40.透明串口应用图示 (39)Figure 41.HF-LPD100缺省UART参数 (40)Figure 42.从透传模式切换到命令模式 (40)Figure 43.”AT+H”列出所有指令示意图 (42)Figure 44.回流焊焊接温度曲线图 (63)Figure 45.HF-LPD100/HF-LPT230出货包装图 (64)表目录Table1.HF-LPD1X0模块技术参数 (12)Table2.HF-LPD100管脚功能定义 (14)Table3.HF-LPD130管脚功能定义 (16)Table4.HF-LPD130 Debug管脚功能定义 (16)Table5.电气特性 (17)Table6.供电和功耗 (17)Table7.HF-LPD100 外置天线参数要求 (20)Table8.HF-LPD100 评估开发套件接口说明 (21)Table9.HF-LPD100网络默认设置表 (29)Table10.错误码列表 (43)Table11.AT+指令列表 (43)Table12.回流焊参数表 (63)历史记录V 0.1 08-24-2017. 内部预览版本V 1.0 10-26-2018. 发布版本V 1.1 06-04-2019. 增加HF-LPD130版本1.产品概述1.1.概述HF-LPD1X0系列低功耗嵌入式 Wi-Fi 模组支持2.4G和5G双频,提供了一种将用户的物理设备连接到Wi-Fi无线网络上,并提供UART串口等接口传输数据的解决方案。

Feniex 警报器使用说明书

Feniex 警报器使用说明书

FENIEX // 2019 // INSTRUCTION MANUALWEB // w w Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price List may not be copied, reproduced, distributed, merged or modified, transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Office.S-5018INSTRUCTION MANUALTMTABLE OF CONTENTS TMSafety Regulations & Warranty 3 Service after Expiration 3 Copyright 3 Feniex Product Copyright 3 Specifications, T ones, & Wiring 4 System Specifications 4 Box Content 4 Dimensions 4 Programming 5 T one Selection 5 Wiring Diagram 5 Power 5 Programming (cont.) 6 Microphone 6SAFETY REGULATIONSThe following provides all the information necessary to safely operate the previously listed products of Feniex Industries, Inc. Please read this manual thoroughly before installing or operating your new product in order to prevent any damage or injury. Failure to follow the listed instructions in this manual may result in damage to your products or personal injury.• Proper installation of this product requires good knowledge of automotive systems, electronics & procedures.• Please guarantee all vital components of the vehicle are not in danger of being damaged by drilling holes necessary for installation. Check all sides of the mounting surface before drilling any holes into the vehicle.• Do not install this product in any way that interferes with the deployment of the air bag. Doing so may damage the effectiveness of the air bag & can lead to serious personal and vehicle injury. The installer will assume full responsibility of proper installation of the new unit.• Please clean the mounting surface before installation of the unit when using tape, brackets, magnet, Velcro or suction cups.• The product’s ground wire must be connected directly to the negative (-) battery post for effective use of the unit. Please follow all wiring guidelines provided to guarantee long lifespan & productivity. Failing to follow these instructions may result in damage to the product.WARRANTYFeniex Industries, Inc. warrants to the original purchaser that the product shall be free from defects in material & workmanship for 5 years from the date of purchase for all LED products. Feniex Industries warranties speakers, sirens, flashers, & controllers for 2 years.If warranty service is needed, please contact customer support:Phone: 1.800.615.8350Web Site: /supportEmail:**********************If the product needs to be returned for repair or replacement, contact our customer service team (using any method listed above) to receive a Return Merchandise Authorization (RMA) number. Operational times are from 9 a.m. to 6 p.m. central time, Monday through Friday.CONDITIONSFeniex Industries, Inc. will not be held responsible for any costs associated with equipment removal and/orre-installation resulting from a warranty claim. It is the sole responsibility of the party initiating a warranty claim to pay shipping charges associated with returning a product to Feniex Industries for repair or replacement.SERVICE AFTER EXPIRATIONFeniex Industries will still provide service for all products after expiration of the warranty. For any issues, call the customer support line. In some instances it may be necessary for the product to be shipped, freight prepaid and insured for loss or damage to Feniex headquarters.SAFETY REGULATIONS & WARRANTYUtilizing non-factory screws and mounting brackets may resultin the loss of warranty coverage.COPYRIGHTThis instruction manual and the Feniex productsdescribed in this instruction manual may include ordescribe copyrighted Feniex material. Laws in the UnitedStates and other countries preserve for Feniex Industriesand its licensors certain exclusive rights for copyrightedmaterial, including the exclusive right to copy, reproducein any form, distribute and make derivative works ofthe copyrighted material. Accordingly, any copyrightedmaterial of Feniex and its licensors contained herein or inthe Feniex products described in this instruction manualmay not be copied, reproduced, distributed, mergedor modified in any manner without the express writtenpermission of Feniex Industries, Inc.FENIEX PRODUCT COPYRIGHTSThe products described in this document are the propertyof Feniex Industries, Inc. It is furnished by express licenseagreement only and may be used only in accordance with theterms of such an agreement. Products and documentationare copyrighted materials. Making unauthorized copies isprohibited by law. No part of the product or documentationmay be reproduced, transmitted, transcribed, stored inretrieval system or translated into any language or computerlanguage, in any form or by any means, without priorpermission from Feniex Industries, Inc.Please do not send in product without contacting support firstfor a Return Merchandise Authorization (RMA) number.TMBOX CONTENTSQUANTITY 1. Titan 30w Siren/Speaker 12. Universal Mounting Bracket 13. ScrewsBOX CONTENTS & DIMENSIONSDIMENSIONSSYSTEM SPECIFICATIONS Operating Voltage 9-15 VDC Operating Current3 AmpsExternal Fuse (if hard wired)125% of Circuit Load Power Output 30 Watts Siren T ones 30Dimensions 4.5" D x 4.5" H x 4.8" D Decibels Out114dBTMAPPL YING POWERThe 30W Siren should be supplied with a solid +12V voltage and GND from the vehicle using appropriate installation methods.The wiring should go directly from the siren to a fuse at the battery. The fuse and wiring should be sized and installed such that resistance and voltage drop are minimized.PROGRAMMINGExcessive resistance and voltage drop can cause low performance or increased heat in power routing.MODE 1/MODE 2 OPERATIONMode 2 takes priority over Mode 1, and will interrupt any tone currently playing on Mode1. Each mode can be programmed to operate in either Hands Free or On/Off operation. T o toggle the operation style of a Mode:1. Power the unit off.2. Connect the desired Mode and the T one Select wires to +12V.3. T oggle between On/Off Activation and Hands-Free Activation . Apply power to the unit. A tone may start playing and after 4 seconds an audible indicator will be heard that verifies the operation style has been toggled.• On/Off Activation: The Mode will play itsprogrammed tone while +12V is applied and stop when it is removed.T o program a Mode in On/Off Operaton, activate that Mode and use the T one Select wire ( Blue) to scroll through the list of tones. The tone that is left selected will remain that Mode's tone the next time it is activated.• Hands Free Activation: Each mode can have a 3 tone list programmed. That mode will play its first programmed tone as soon as +12V is applied (including a single tap), and stop when +12V is rapidly double tapped. If a tone is already playing and the Mode wire is single tapped to +12V, the next tone in the 3 tone list will play.T o program a Mode in Hands Free Operation, activate the Mode, scroll through the 3 tone list and use the T one Select wire to set the desired tones for each position.P ARK KILL - OPERATIONWhen connected to a +12V, the microphone and all tones(including voice commands and audio files) are muted.COLOR FUNCTIONPOLARITY CONNECTION Black Ground 12v (-)Chasis GroundRed Battery 12v (+)Positive Battery T erminal Brown Mode 212v (+)Latching Switch Y ellow Mode 112v (+)Latching Switch White Park-Kill 12v (+)Momentary Signal Blue T one Select 12v (+)Latching Switch Green Microphone Input N/A Optional Microphone GrayMicrophone InputN/AMic GBD Input*Should connect to the barrel of mic jackWIRING DIAGRAMSIREN TONES TONE SELECT - OPERATIONWith one of the Modes selected and a tone playing, tap the Blue wire to +12V for 1 second to advance thecurrent tone to the next. Continue to repeat the tone scroll until the desired tone is selected. That tone will now be programmed to the selected Mode (Modes will remain programmed even if power is removed from the unit).TMMICROPHONE & EXTRASTM CONNECT MICROPHONEA microphone can be installed by cutting the spliceconnecting the Green and Gray wires (default shippingconfiguration). A microphone should then be connectedby soldering and heat shrinking the microphone GND tothe Gray wire, and the microphone signal to the Greenwire.When keyed, the microphone will take priority andinterrupt any siren tone.If the microphone is not connected, the Gray and Green wiresmust be connected.*otherwise the unit will think the microphone is constantly keyed。

FLIR E54 E76 E86 E96 高级热成像相机规格说明书

FLIR E54 E76 E86 E96 高级热成像相机规格说明书

A D VA N C E D T H E R M A L I M A G I N G C A M E R A SSPECIFICATIONSModel E54E76E86E96IR resolution 320 × 240 pixels320 × 240 pixels464 × 348 pixels640 × 480 pixels Resolution with UltraMax®enhancement—307,200 pixels645,888 pixels 1.2 megapixelsMSX® image enhancement Yes: details from visual camera add depth and perspectiveBuilt-in visual camera 5 MP, fixed focus, with built-in LED lightThermal sensitivity <40 mK @ 30°C (86°F)<30 mK @ 30°C (86°F), 42° lens<30 mK @ 30°C (86°F), 42° lens<30 mK @ 30°C (86°F), 42° lensTemperature range -20°C to 120°C (-4°F to 248°F);0°C to 650°C (32°F to 1202°F)-20°C to 120°C (-4°F to 248°F);0°C to 650°C (32°F to 1202°F)-20°C to 120°C (-4°F to 248°F);0°C to 650°C (32°F to 1202°F);300°C to 1500°C (572°F to 2732°F)-20°C to 120°C (-4°F to 248°F);0°C to 650°C (32°F to 1202°F);300°C to 1500°C (572°F to 2732°F)Optional temperature range—300°C to 1000°C(572°F to 1832°F)——Accuracy±2°C (±3.6°F) or ±2% of the readingFocus modes Manual Continuous laser distancemeter (LDM), one-shot LDM,one-shot contrast, manual Continuous LDM, one-shot LDM,one-shot contrast, manualContinuous LDM, one-shot LDM,one-shot contrast, manualDigital zoom1–4x continuous1–8x continuous Measurement tools 3 spotmeters in live mode,1 area meter in live mode3 spotmeters in live mode, 3 area meters in live modeMeasurement presets None, center spot, hot spot, coldspot, 3 spots, hot spot-spot*None, center spot, hot spot, cold spot, User Presets 1&2Available lenses None (fixed lens)14°, 24°, 42°, macro (2x)Lens identification—Automatic (FLIR AutoCal TM)1-Touch Level/Span Yes: automatic contrast enhancementLaser pointer YesLaser distance meter—YesArea measurementinformation——YesOn-camera routing software FLIR Inspection Route TM — enabledOn-camera report building Voice annotation and GPS tagging to images and video; on-screen text; sketch on infrared images from touchscreen FLIR software integration FLIR Thermal Studio Starter, FLIR Thermal Studio, FLIR Thermal Studio Pro, FLIR Research StudioRadiometric JPEG YesIR, radiometric, visual videorecordingYesIR, radiometric, visual videostreamingYes, over UVC (radiometric, non-radiometric, visual) and Wi-Fi (non-radiometric, visual)Communication modes USB 2.0, Bluetooth®, Wi-Fi, DisplayPortMETERLiNK®YesDisplay640 × 480 pixels (VGA) Dragontrail® touchscreenDrop-testing 3 m (6.6 ft)Battery operation time>2.5 hours, typical use*Hot spot to center spot Delta measurementSpecifications are subject to change. For the most up-to-date specifications, please visit .FLIR Exx-SeriesFLIR E76, E86, and E96 cameras are compatible with all of our interchangeable AutoCal lenses. The camera automatically recognizes when a new lens is attached and launches a wizard to begin auto-calibrating the camera with the lens—no need to send the camera in for service. This helps ensure the camera always produces high-quality images and precise thermal measurements.Exx-Series cameras are the first FLIR models to come with our exclusive Inspection Route Camera Option automatically enabled in the camera.Designed for thermographers who regularly inspect large numbers of objects over the course of a day, FLIR Inspection Route guides the user along a pre-defined route of inspection points so they can collect images and data in a structured manner.The route begins in FLIR Thermal Studio Pro software, where users build their plan using the Route Creator plugin. They can include as many inspection targets as needed and organize them for maximum efficiency. Once they export the completed route to the Exx camera, they’re ready to begin the day.The predefined route guides the user’s on-site movement to each inspection asset, automatically collecting and organizing saved images for a seamless import into FLIR Thermal Studio Pro. By ensuring that nothing is missed and that all inspection results are organized from the start, the suite of FLIR inspection software speeds up inspections, improves organization, and simplifies reporting.Learn more about FLIR Thermal Studio Pro , the FLIR Route Creator Plug-in , and the FLIR Inspection Route Camera Option at .WHAT LENS DO YOU NEED?14°, 29 mm lens: this telephoto lens has a narrow field of view for precise focus and crisp imaging of distant targets.24°, 17 mm lens: often considered the “standard” lens, the 24° × 18° field of view allows users to remain a safe distance from energized equipment (e.g. 3 m/6.6 ft) while still obtaining a crisp focus on smaller targets.42°, 10 mm lens: this wide-angle lens captures the largest field of view for imaging buildings, roofs, or other areas where it’s important to gather the most information in a single image.EMPOWERED WITH REPORTING SOLUTIONS TO STREAMLINE INSPECTIONSFLIR AutoCal TM LensesTHE Exx-SERIES and FLIR THERMAL STUDIO PRO /exx-seriesEquipment described herein is subject to US export regulations and may require a license prior to export. Diversion contrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice. ©2020 FLIR Systems, Inc. All rights reserved. 09/20. 20-1191-INS。

SCALANCE XF204产品说明书

SCALANCE XF204产品说明书

certificate of suitability
EN 61000-6-4:2001
● C-Tick
Yes
● KC approval
Yes
● railway application in accordance with EN 50155
No
● railway application in accordance with EN 50124-1
Data sheet
6GK5204-0BA00-2AF2
SCALANCE XF204, flat, Managed IE switch, 4x 10/100 Mbit/s RJ45 ports, Error signaling contact with set pushbutton, Redundant power supply, PROFINET IO device network management, Redundancy Manager integrated, incl. electron. manual on CD-ROM, C-plug optional.
● media redundancy protocol (MRP) with redundancy Yes manager
● Parallel Redundancy Protocol (PRP)/operation in
Yes
the PRP-network
● Parallel Redundancy Protocol (PRP)/Redundant
● from CSA and UL
ANSI / ISA 12.12.01, CSA C22.2 No. 213-M1987, CL. 1 / Div. 2 / GP. A, B, C, D T4, CL. 1 / Zone 2 / GP. IIC, T4

FLIR X6000sc系列高端热成像相机说明书

FLIR X6000sc系列高端热成像相机说明书

FLIR X6000sc SeriesHigh End Thermal Imaging CamerasThe FLIR X6000sc Series thermal imaging cameras are designed to provide the best thermal measurement performance together with the mostadvanced connectivity. They are ideal for Scientists and R&D professionals that are working on the most demanding applications. State-of-the-artconnectivity and ease of use allow the user to concentrate on the experiment and not on the camera.THERMAL IMAGING WITH HIGH SENSITIVITYThe FLIR X8000sc Series are equipped with a cooled Indium Antimonide detector that produces crisp thermal images of 640 x 512 pixels. They allow seeing the smallest of details. FLIR X6000sc Series detect temperature differences smaller than 25mK (18mK typically). With the “lock-in” process temperatures differences as small as 1mK will become clearly visible. The cameras automatically adjust their temperature range to best fit the thermal scene.The FLIR X6000sc Series contain a 4 slots motorized filter wheel with automatic filter recognition and measurement parameter adjustment. A temperature probe is integrated for improved measurement accuracy.ULTRA HIGH FRAME RATE WITH WINDOWINGThe FLIR X6580sc has an adjustable frame rate of up to 355 Hz full frame. It can deliver images up to a speed of 4,500 Hz in windowing. The FLIRX6550sc and X6540sc have an adjustable frame rate of up to 125 Hz full fram. They can deliver images up to a speed of 4,011 Hz in windowing. The sub-sample windows can be arbitrarily chosen and are easily defined.CONNECTIVITYThe FLIR X6000sc Series offer a wide range of connectivity options such as Camera Link medium for full bandwidth data acquisition, Gigabit Ethernet for simple connectivity, Standard BNC connectors for often used features such as Detector Sync, Acquisition trigger, analog lockin input, MicroSD-cardslot, DVI-output 1080p and IRIG-B connector for external time stamping. An extension port with advanced features and connections is available.SOFTWAREFLIR X6000sc Series cameras work seamlessly together with FLIR Re-search I R Max software enabling intuitive viewing, recording and advanced processing of the thermal data provided by the camera. Each camera comes standard with this especially for R&D applications developed software. A Software Developers Kit (SDK) is optionally available.KEY FEATURES• Cooled Indium Antimonide detector (InSb): 640 x 512 pixels • High frame rates with windowing • Removable touchscreen LCD • Motorized filter wheelElectronic board, wafer and cells inspectionRolling tire structure thermal evaluationImaging Specifications NASDAQ: FLIRSpecifications are subject to change without notice©Copyright 2014, FLIR Systems, Inc. All other brand and product names are trademarks of their respective owners. The images displayed may not be representative of the actual resolution of the camera shown. Images for illustrative purposes only. (Created 08/14)Touchscreen LCD- microSD - USB device - DVICAMLINK Base/MediumGigEDigital & Analog I/O's IR RemoteAuxilliary connector Status LEDs Power buttonPORTLANDCorporate Headquarters FLIR Systems, Inc.27700 SW Parkway Ave.Wilsonville, OR 97070USAPH: +1 866.477.3687BELGIUMFLIR Systems Trading Belgium BVBALuxemburgstraat 22321 Meer BelgiumPH: +32 (0) 3665 5100SWEDENFLIR Systems AB Antennvägen 6, PO Box 7376SE-187 66 Täby SwedenPH: +46 (0)8 753 25 00NASHUAFLIR Systems, Inc.9 Townsend West Nashua, NH 06063USAPH: +1 603.324.7611UKFLIR Systems UK 2 Kings Hill Avenue Kings HillWest Malling - Kent ME19 4AQUnited KingdomPH: +44 (0)1732 220 011。

FiiO飞傲无损播放器X3电子说明书2.0

FiiO飞傲无损播放器X3电子说明书2.0
充电 传输歌曲 固件升级 储存 音乐播放 其他操作 与其他音频设备连接 USB DAC常见问题与解答, 见电子说明书-2(USB DAC功能)
2 3-4
5
6-7 8-10
11 12 12 13 14 14 15 16 16
2
一、产品介绍:
X3是一款高保真的数字音频播放器,能支持MP2、MP3、WAV、WMA、APE、FLAC、 AAC,ALAC、OGG、AIFF无损音乐格式,最高支持192K/24bit采样率,同时支持CUE索引 播放、无缝播放功能、是一款高性能的便携式播放器。同时,X3可以作为一台USB DAC设 备使用。下面我们结合一些图示来介绍下X3的使用介绍。
3.播放全部 短按播放键进入播放全部列表,再次短按一次播放键进入正在播放页面。
4.我的最爱 a)当我的最爱里面没有任何曲目时,弹出中间的对话框,显示播放失败,未发现文件。 b)当我的最爱里面有曲目时,短按确认键,进入正在播放页面。
5.分类播放 分类播放分为专辑、风格、表演者。
6.浏览文件 浏览文件菜单,短按播放键进入本地磁盘和TF卡选项,当没插入TF卡时,弹出对话框“播放失败,未发 现文件”。
c)背光时间 背光时间包含常亮及设定时间,设定时间为10s、20s、30s、40s、50s、60s;短按或者长按音量+ 键可以调节,背光时间的定义为不管是在播放模式还是非播放模式下,当达到背光时间的时间后,播放 器的屏幕会自动关闭。
9
d)省电关机 省电关机包含关闭及设定时间,设定时间为30s、60s、90s、120s、150s、180s、210s;短按或者长按 音量+ -键可以调节,省电关机的定义为在非播放模式下,多少秒不操作播放器当达到省电关机设定时间后, 播放器自动关机。 e)背光亮度 背光亮度从最亮到最暗为5个级别,短按或者长按音量+ -键可以调节。 f)主题设定 短按播放键进入主题选择菜单,短按或者长按音量+ -键可以从不同的主题中选择,返回即可立即生效; g)更新歌曲库 更新歌曲库分为手动和自动两种模式,手动是指每次跟电脑交换数据后,必须手动更新歌曲库,自动是 指只要是跟电脑连接出现过联机画面后,都会自动更新歌曲库。 更新歌曲库过程中请不要触发任何按键,否则会提示更新失败,请重新更新歌曲库的提示,当歌曲更新 完毕后,会弹出操作成功,歌曲库已更新的对话框。 h)USB模式 选择默认为电脑USB存储模式, 或者是电脑USB DAC模式. 其中选择为DAC模式后, X3插入电脑USB, 将 弹出DAC设置界面 i)本机与存储信息 本机与存储信息可以查看到本机内存及可用容量,外置内存及可用容量以及固件版本,还可以通过音量 + -键查看飞傲有关于播放器的版权说明信息。 j)格式化 当识别有TF卡插入状态, 选择格式化, 确认"是", 外置TF将被格式化, 格式化后全部文件将丢失。 k)Restore/恢复出厂设定 当选择Restore/恢复出厂设定时,系统会弹出一个对话框确认是否恢复出厂设定值,再次按确认键才会 恢复出厂设定值,恢复成功后会弹出已恢复出厂设定值对话框,当即生效。

FEX 系列 SDI + IP 变焦固定摄像机 使用说明书

FEX 系列 SDI + IP 变焦固定摄像机 使用说明书
默认静态 IP 地址为 192.168.0.13,默认子网掩码为 255.255.255.0。如果在网络中使用 DHCP 服务器,则可能会动态分配摄像机的 IP 地址,需要使用正确的 IP 地址登录。使用视频管理软 件查看摄像机的动态 IP 地址。
下面以 IE 为例来描述登录过程。 1. 通过在地址栏中输入摄像机的正确 IP 地址,浏览登录页面。 2. 如果是第一次登录,请按照系统提示并安装 ActiveX。 需要关闭浏览器才能完成安装。 3. 单击“允许”继续登录。
4. 输入用户名和密码,然后单击“登录”。 对于第一次登录,请使用默认用户名 admin 和密码 admin。 如果选择实况登录,则在登录时将显示实况 视频。否则,需要在实时查看窗口中手动启动 实时视频。 如果选择保存密码登录,则每次登录时不需 要输入密码。为了确保安全,建议不要选择保 存密码。 要清除用户名和密码文本框和保存密码复选 框,请单击重置。
注意: 重要信息:请务必记下新密码,并保证安全。 如果忘记密码,摄像机将需要硬件复位。 重置
服务可能需要支付额外费用(密码丢失时,请与厂家联系)。
3
WEB 界面说明
1.IP 菜单栏 用于实时播放、回放和设置以及注销
2.实时流设置栏 用于更改实时流显示比例 用于在主码流,辅码流和第三码流之间切换 包含图像设置界面的快捷方式,可在其中配置图像选项
本地录像格式 - 确定录像文件格式(自动配 置为存储 AVI 文件)
本地录像保存路径-这是计算机上保存录 像文件的目录
截屏图片保存路径-这是计算机上保存抓图的目录 5
音视频设置
音视频选项卡用于配置摄像机生成的所有视频和音频流的压缩、格式和数据速率设置
定义: 编码:可用的编码标准(H.264 / H.265 / MJPEG) 分辨率:(WxH)构成图像宽度的像素点(W)乘以构成图像高度的像素点(H) 码率:控制选项: 定码率 - 任何情况下,比特率不变。 变码率 - 随图像的复杂程度自动调节比特率。 帧率:捕获图像帧的速率 GOP 长度:在编码视频流中的一组连续图像内捕获关键帧的间隔 比特率:每秒传输的数据量。以每秒(Kbps)为单位测量。1000 kbps = 1Mbps

FLIR Exx-Series 热成像相机产品说明书

FLIR Exx-Series 热成像相机产品说明书

FLIR redesigned the Exx-Series from the handle up to deliver the best performance, resolution, and sensitivity of any pistol-grip handheld thermal camera. The new Exx-Series cameras are packed with the features you need to quickly troubleshoot electrical distribution and mechanical systems, so you can avoid equipment failures, increase plant safety, and maximize up-time.FLIR Exx-Series cameras now offer:• Interchangeable, auto-calibrating lenses*• Laser distance meter for measurementinformation and crisp, accurate focus• Our best MSX® enhancement• UltraMax® processing for 4x pixel resolution • A larger, 4” display that’s 33% brighter • A responsive new interface• Improved organization and reporting optionsBRILLIANCEAT WORK* E75, E85, E95 only.The new Exx-Series is packed with the high performance features you need to quickly find and report hidden hot spots: a bright, bold new screen, razor-sharp lenses,and a rapid-response user interface.Focus Fast & True• Laser-assisted autofocus responds quickly, improves measurement accuracy*• Superior spot-size performance for measurement of small, distant targets• Interchangeable lenses provide coverage for any target, any scene*Navigate Screens Easier• Quick response capacitive touchscreen • Updated GUI with improved flow and feedback • Logical navigation on screen and in menusSee Greater Detail• Vibrant LCD is 33% brighter than earlier models • Large 4” display with 160° viewing angle • Up to 464 x 348 true native IR resolution • Improved FLIR MSX ® image enhancementUNPARALLELED PERFORMANCEReport Problems Quickly• Wi-Fi connects camera to mobile devices or in-plant networks• Image annotation through voice, text, on-screen sketch, GPS tagging, and compass • New folder and naming structure makes finding images easier• Enhanced image analysis and reporting through FLIR Tools+ softwareQuantify Potential Problems• Accurate temperature readings on hot spots • Wide temperature ranges, up to 1500°C • Sensitivity to detect minute temperature differences* E75, E85, E95 only.Multiple Targets, One SolutionNot every target is large enough or close enough for proper measurement with a single lens. That’s why FLIR designed the new Exx-Series withinterchangeable* 24°, 42°, and 14° lenses – so you can use the same camera for every target you survey. The camera auto-calibrates with each new lens to ensure it produces high-quality images and precise thermal measurements.Tailored to Your SystemsThe new Exx-Series cameras produce standard radiometric JPEGs that can be opened and viewed without proprietary software. These images can be viewed and edited in FLIR Tools, and are supported by FLIR’s Software Development Kit (ATLAS SDK). This allows companies to use their own Computerized Maintenance Monitoring Systems (CMMS) and still support read-out of thermal measurements, METERLiNK ® data, GPS, compass, and other important parameters embedded within the image.The Best LensesNeed the Best Autofocus*FLIR took its cue from the digital camera industry when re-engineering the Exx-Series focus system. Whether you choose autofocus or continuous focus, the camera’s precise laser-assisted focus and FLIR’s innovative lenses ensure you get crisp results, for the most accurate temperature readings.EXPANDABLE AND MODULAR* E75, E85, E95 only.TECHNICALSPECIFICATIONSThe Infrared Training CenterThe greater your knowledge about thermal imaging, the greater the dividendsyou’ll realize for your company and your career. That’s why the Infrared TrainingCenter (ITC) offers classes for practically every application, from free onlinecourses to advanced training that can certify you as a thermography expert,qualifying you to take a leadership role in your internal IR program.ITC classes include:• Thermography Fundamentals Training• IR Electrical Inspection• IR Mechanical InspectionThermography Certification TrainingLevel I certifies that you know how a thermal imager works and how to use it. LevelII cranks your credibility up a notch with more in-depth concepts and intensive labs.Level III asserts that you have knowledge and skills to administer your company’sthermography program. These certifications offer strong validation to support thework you do as a thermographer.Mobile Training Units and on-site training at your facility are encouraged if you wouldlike to certify a group of 10 or more. For a complete list and schedule of courses andmore information, visit .Exx-Series cameras are backed byFLIR’s industry-leading warranty2 years: Full protection, parts, labor10 years: DetectorFULL PRODUCTWARRANTY*DETECTORWARRANTY** After product registration on LEARN MORE ABOUT EXX-SERIES CAMERAS AT /EXX-ELECTRICALFLIR Exx-Series™Features By Camera E53E75E85E95IR Resolution240 × 180(43,200 pixels)320 × 240(76,800 pixels)384 × 288(110,592 pixels)464 × 348(161,472 pixels)UltraMax®—307,200 pixels442,368 pixels645,888 pixelsObject Temperature Range-20°C to 120°C(-4°F to 248°F)0°C to 650°C(32°F to 1200°F)-20°C to 120°C(-4°F to 248°F)0°C to 650°C(32°F to 1200°F)Optional300°C to 1000°C(572°F to 1830°F)-20°C to 120°C(-4°F to 248°F)0°C to 650°C(32°F to 1200°F)300°C to 1200°C(572°F to 2192°F)-20°C to 120°C(-4°F to 248°F)0°C to 650°C(32°F to 1200°F)300°C to 1500°C(572°F to 2732°F)Focus Manual Continuous, one-shotlaser distance meter(LDM), one-shotcontrast, manualContinuous, one-shotlaser distance meter(LDM), one-shotcontrast, manualContinuous, one-shotlaser distance meter(LDM), one-shotcontrast, manualField of View (FOV)24° × 18°42° × 32° (10 mmlens), 24° × 18° (18mm lens), 14° × 10°(29 mm lens)42° × 32° (10 mmlens), 24° × 18° (18mm lens), 14° × 10°(29 mm lens)42° × 32° (10 mmlens), 24° × 18° (18mm lens), 14° × 10°(29 mm lens)Lens Identification—Automatic Automatic AutomaticTime-lapse (Infrared)———10 sec to 24 hoursLaser Area Measurement——Yes YesLaser Distance Measurement—Yes, on-screen Yes, on-screen Yes, on-screenMeasurement Presets No measurement,center spot, hot spot,cold spot, 3 spots, hotspot-spot*No measurement,center spot, hot spot,cold spot, User Preset1, User Preset 2No measurement,center spot, hot spot,cold spot, User Preset1, User Preset 2No measurement,center spot, hot spot,cold spot, User Preset1, User Preset 2Spotmeter 3 in live mode 1 in live mode 3 in live mode 3 in live modeArea 1 in live mode 1 in live mode 3 in live mode 3 in live modePicture-in-Picture Centered infrared areaon the visual imageResizable and movable Resizable and movable Resizable and movableCommon FeaturesDetector Type and Pitch Uncooled microbolometer, 17 µmThermal Sensitivity/NETD<0.04°C @ 30°C (86°F), 24° lensSpectral Range7.5 – 14.0 µmImage Frequency30 HzF-Number f/1.3, 24° lensDigital Zoom1-4x continuousImage Presentation and ModesDisplay4”, 640 × 480 pixel touch screen LCD with auto-rotationDigital Camera 5 MP, 53° × 41° FOVColor Palettes Iron, Gray, Rainbow, Arctic, Lava, Rainbow HCImage Modes Infrared, visual, MSX®, Picture-in-PictureMSX®Embosses visual details on full resolution thermal imageMeasurement and AnalysisAccuracy ±2°C (±3.6°F) or ±2% of reading for ambient temperature 15°C to 35°C (59°F to 95°F) and objecttemperature above 0°C (32°F)Alarms Moisture, insulation, and measurementColor Alarm (Isotherm)Above/below/interval/condensation/insulationCompass, GPS Yes; automatic GPS image taggingMETERLiNK®Yes; several readingsLaser Pointer Yes; dedicated buttonImage StorageStorage Media Removable SD card (8 GB)Image File Format Standard JPEG with measurement data includedVideo Recording and StreamingRadiometric IR VideoRecordingReal-time radiometric recording (.csq)Non-Radiometric IR or VisualVideoH.264 to memory cardRadiometric IR VideoStreamingYes, over UVC or Wi-FiNon-Radiometric IR VideoStreamingH.264 or MPEG-4 over Wi-Fi; MJPEG over UVC or Wi-FiCommunication Interfaces USB 2.0, Bluetooth, Wi-Fi, DisplayPortVideo Out DisplayPort over USB Type-CAdditional DataBattery Type Li-ion battery, charged in camera or on separate chargerBattery Operating Time Approx. 2.5 hours at 25°C (77°F) ambient temperature and typical useOperating TemperatureRange-15°C to 50°C (5°F to 122°F)Storage Temperature Range -40°C to 70°C (-40°F to 158°F)Shock/Vibration/Encapsulation; Safety25 g / IEC 60068-2-27, 2 g / IEC 60068-2-6, IP 54 /IEC 60529; EN/UL/CSA/PSE 60950-1Weight/Dimensions 1 kg (2.2 lbs), 27.8 × 11.6 × 11.3 cm (11.0 × 4.6 × 4.4 in)Box ContentsInfrared camera with lens, battery (2 ea), battery charger, front protection, straps (hand, wrist),hard transport case, lanyards, lens caps, lens cleaning cloth, power supplies, 8 GB SD card, Torxwrench, cables (USB 2.0 A to USB Type-C, USB Type-C to USB Type-C, USB Type-C to HDMI)Specifications are subject to change without notice.For the most up-to-date specs, go to *Hot spot to center spot Delta measurementE-mail:**************************。

FLIR Exx系列手持热像机产品说明书

FLIR Exx系列手持热像机产品说明书

FLIR ha rediseñado completamente laserie Exx para ofrecer un rendimiento, unaresolución y una sensibilidad inigualablesen una cámara térmica de mano.Las nuevas cámaras de la serie Exxcuentan con numerosas funcionalidadesútiles para resolver rápidamente problemasde distribución eléctrica y sistemasmecánicos, de manera que podrá evitarfallos en los equipamientos, aumentar laseguridad de una planta y maximizar eltiempo de s cámaras de la serie Exx de FLIR ahora ofrecen:• Lentes intercambiables de calibración automática • Medidor de distancia con láser para información de medición y un enfoque nítido y preciso • Nuestra mejora de imágenes MSX ®• Procesamiento UltraMax ® para una resolución en píxeles 4 veces mejor • Una pantalla de más tamaño, de 4”, que es un33% más brillante• Una nueva interfaz intuitiva• Mejora en la organización y en las opciones deinformesBRILLANTEZEN EL TRABAJOVer más detalle• El nítido LCD es un 33% más brillante que los modelos anteriores• Gran pantalla de 4” con ángulo de visión de 160°• Hasta 464 x 348 de resolución IR nativa real• Mejora de imágenes MSX® de FLIRCuantificar posibles problemas• Lecturas precisas de temperatura en puntos calientes • Amplios rangos de temperatura, hasta 1500 °C• Sensibilidad para detectar diferencias mínimas detemperaturaEnfoque rápido y real• El enfoque automático responde rápidamente y mejora la precisión de las mediciones• Rendimiento superior por tamaño de punto para lamedición de objetivos pequeños y distantes• Las lentes intercambiables proporcionan cobertura para cualquier objetivo y cualquier escenaLa nueva serie EXX cuenta con lasfunciones de alto rendimiento que necesitapara encontrar e informar rápidamentede puntos calientes: una pantalla nueva ybrillante, lentes nítidas y una interfaz deusuario de respuesta rápida.Navegación más sencilla por las pantallas • Pantalla capacitiva de respuesta rápida • GUI actualizada con mejor flujo y mejores resultados • Navegación lógica en la pantalla y en menúsRENDIMIENTO INCOMPARABLEInformes rápidos sobre problemas• La cámara se conecta por wifi con losdispositivos móviles o las redes internas• La anotación de imágenes por voz, texto, dibujosen pantalla, etiquetado GPS y brújula• La nueva estructura de carpetas y denomenclatura facilita encontrar las imágenes• Análisis de imágenes y elaboración de informesmejorados a través del software FLIR Tools+El puntero láser ofreceguía visualBotones de enfoqueautomático y degrabación separados La cámara digital de 5 MP seha colocado más cerca deldetector térmico para obtenermejoras del MSX ®Este elegante nuevo diseño no es solo una decoración.Desde el chasis impermeable de caucho hasta el LCDcon vidrio de protección Dragontrail ™, la nueva serie Exxse ha elaborado para su duro entorno de trabajo.DISEÑO DURADERO PARA PROFESIONALES QUE TRABAJAN DUROLentes intercambiablesde 24°, 42° y 14°La linterna LED brillante mejorala calidad de la imagen en zonaspoco iluminadasEl láser ofrece medición a distancia yun enfoque automático precisoVarios objetivos, una solución No todos los objetivos son lo bastante grandes o están lo bastante cerca para una medición correcta con una sola lente. Por eso, FLIR ha diseñado la nueva serie Exx con lentes intercambiables de 24°, 42° y 14°, para que pueda utilizar la misma cámara para todos los objetivos que investigue. La cámara se calibra automáticamente con cada nueva lente para garantizar que producirá imágenesde alta calidad y mediciones térmicasprecisas Adaptada a sus sistemas Las nuevas cámaras de la serie Exx producen JPEG radiométricos estándar que pueden abrirse y verse sin software privado. Estas imágenes pueden verse y editarse en FLIR Tools y son compatibles con Software Development Kit (ATLAS SDK) de FLIR. Esto permite que las empresas utilicen sus propios sistemas de supervisión de mantenimiento computerizado (CMMS, por sus siglas en inglés) y aun así podrán utilizar la lectura de mediciones térmicas, datos de METERLiNK ®y otros parámetros importantes integrados enla s mejores lentes necesitan el mejorenfoque automático FLIR siguió el ejemplo del sector de lascámaras digitales al rediseñar el sistema deenfoque de la serie Exx. Bien si se decidepor el enfoque automático o por el continuo,el preciso enfoque asistido por láser de lacámara y las innovadoras lentes de FLIRgarantizan que obtendrá unos resultadosnítidos y las lecturas de temperatura másprecisas.EXPANSIBLE Y MODULARESPECIFICACIONESTÉCNICASCentro de formación eninfrarrojosCuanto más conocimientos tenga de termografía, mayores serán los dividendosque conseguirá para su empresa y su carrera. Por ese motivo, el centro deformación en infrarrojos (ITC) ofrece clases prácticamente para cada aplicación,desde cursos en línea gratuitos hasta formación avanzada con la que puedeobtener la certificación como experto en termografía, lo que le permitirá liderarsu programa interno de infrarrojos.Las clases del ITC incluyen:• Formación en los fundamentos de la termografía• Inspecciones eléctricas con infrarrojos• Inspecciones mecánicas con infrarrojosFormación con certificación en termografíaEl nivel I certifica que sabe cómo funciona un termógrafo y que sabe utilizarlo.El nivel II aumenta su credibilidad con conceptos en profundidad y actividadesintensivas en laboratorio. El nivel III garantiza que tiene conocimientos yhabilidades para administrar el programa de termografía de su empresa. Estascertificaciones ofrecen una potente validación para respaldar su trabajo comotermógrafo.Recomendamos las unidades móviles de formación y la formación in situ ensu lugar de trabajo si desea certificar a un grupo de 10 o más. Para ver una listacompleta, un programa de los cursos y más información, visite.E-mail:**************************。

相关主题
  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
相关文档
最新文档