Mini-MBAprojectforMSBU-1302
Modular Robotics PowerCube系列产品说明书
PGElectrical · Principle of Function · Universal Gripper1044Modular RoboticsModular-Standardized interfaces for mechatronics and control for rapid and simple assembly without complicated designs-Cube geometry with diverse possibilities for creating individual solutions from the modular systemIntegrated-The control and power electronics are fully integrated in the modules for minimal space requirements and interfering contours-Single-cable technology combines data transmission and the power supply for minimal assembly and start-up costs Intelligent-Integrated high-end microcontroller for rapid data processing -Decentralized control system for digital signal processing -Universal communication interfaces for rapid incorporation in existing servo-controlled conceptsYour advantages and benefitsThe modules of the PowerCube series provide the basis for flexible combinatorics in automation. Complex systems and multiple-axis robot structures with several degrees of freedom can be achieved with minimum time and expenditure spent on design and programming.Module overviewThe innovative technology of the PowerCube modules already forms the basis of numerous applications in the fields of measuring and testing systems, laboratory automation, service robotics and flexiblerobot technology.PGServo-electric2-Finger Parallel Gripper PRServo-electric Rotary Actuators PWServo-electricRotary Pan Tilt ActuatorsPSMServo-motors with integrated position controlPDUServo-positioning motor with precision gearsPLSServo-electric Linear Axes withball-and-screw spindle drivePG·Universal Gripper1045Method of actuationThe PowerCube modules work completely independently. The master control system is only required for generating the sequential program and sending it step by step to the connected modules. Therefore, only the current sequential command is ever stored in the modules, and the subsequent command is stored in the buffer. The current, rotational speed and positioning are controlled in the module itself. Likewise, functions such as temperature and limit monitoring are performed in the module itself. Real-time capability is not absolutely essential for the master control or bus system. For the communication over Bus-System the SMP - SCHUNK Motion Protocol - is used. This enables you to create industrial bus networks,and ensures easy integration in control systems.Control version AB Hardware Control with PLC (S7)Control with PC Interface Profibus DP CAN bus / RS-232SoftwareWindows (from Windows 98) operating systemLINUX operating systemDevelopment platforms MC-Demo Operating Software PowerCube (LabView, Diadem)with Online documentation, standard softwaregsd-file, programming examples(gsd file, programming examples)on requeston requestIncluded with the ''Mechatronik DVD'' (ID 9949633): Assembly and Operating Manual with manufacturer's declaration, MCDemo software and description and gsd-file for S7 use.1234567889ᕃ24VDC / 48VDC power supply provided by the customerᕄControl system provided by the customer (see control versions A, B and C)ᕅPAE 130 TB terminal block for connecting the voltage supply, the communication and the hybrid cable (Option for easy connection)ᕆPDU servo-motorᕇLinear axis with PLS ball-and-screw spindle drive and PSM servo-motorᕈHybrid cable (single-cable technology) for connecting the PowerCube modules (voltage supply and communication). Not recommended for the use in Profibus applications ᕉPW Servo-electric Rotary Pan Tilt Actuator ᕊPG Servo-electric 2-Finger Parallel Gripper ᕋPR Servo-electric Rotary ActuatorPG· Universal Gripper1046Size 70Weight 1.4 kg Gripping force up to 200 N Stroke per finger 35 mm Workpiece weight1 kgApplication exampleDouble rotary gripper module for loading and unloading of sensitive componentsPG 70 Servo-electric 2-Finger Parallel Gripper PR 70 Servo-electric Rotary ActuatorPGUniversal Gripper1047Gripping force control in the range of 30 - 200 N for the delicate gripping of sensitive workpieces Long stroke of 70 mm for flexible workpiece handlingFully integrated control and power electronics for creating a decentralized control systemVersatile actuation optionsfor simple integration in existing servo-controlled concepts via Profibus-DP, CAN bus or RS-232Standard connecting elements and uniform servo-controlled conceptfor extensive combinatorics with other PowerCube modules (see explanation of the PowerCube system)Single-cable technology for data transmission and power supplyfor low assembly and start-up costsServo-electric 2-finger parallel gripper with highly precise gripping force control and long strokeUniversal GripperArea of applicationUniversal, ultra-flexible gripper for great part variety and sensitive components in clean working environmentsYour advantages and benefitsGeneral information on the seriesWorking principle Ball screw driveHousing materialAluminum alloy, hard-anodized Base jaw materialAluminum alloy, hard-anodized ActuationServo-electric, by brushless DC servo-motorWarranty 24 monthsScope of deliveryGuide centering sleeves and ‘’Mechatronik DVD’’ (contains an Assembly and Operating Manual with manufacturer’s declarartion and MC-Demo software withdescription)PG· Universal Gripper1048Control electronicsintegrated control and power electronics for controlling the servo-motorEncoderfor gripper positioning and position evaluationDrivebrushless DC servo-motorGear mechanismtransfers power from the servo-motor to the drive spindleSpindletransforms the rotational movement into the linear movement of the base jaw Humidity protection cap link to the customer’s systemThe brushless servo-motor drives the ball screw by means of the gear mechanism.The rotational movement is transformed into the linear movement of the base jaw by base jaws mounted on the spindles.Function descriptionThe PG gripper is electrically actuated by the fully integrated control and power electronics. In this way, the module does not require any additional external control units.A varied range of interfaces, such as Profibus-DP, CAN-Bus or RS-232 are available as methods of communication. For the communication over Bus-System the SMP - SCHUNK Motion Protocol - is used. This enables you to create industrial bus networks, and ensures easy integration in control systems.If you wish to create combined systems (e.g. a rotary gripper module), various other modules from the Mechatronik-Portfolio are at your disposal.Electrical actuationSectional diagramPGUniversal Gripper1049Gripping forceis the arithmetic total of the gripping force applied to each base jaw at distance P (see illustration), measured from the upper edge of the gripper.Finger lengthis measured from the upper edge of the gripper housing in the direction of the main axis.Repeat accuracyis defined as the spread of the limit position after 100 consecutive strokes.Workpiece weightThe recommended workpiece weight is calculated for a force-type connection with a coefficient of friction of 0.1 and a safety factor of 2 against slippage of theworkpiece on acceleration due to gravity g. Considerably heavier workpiece weights are permitted with form-fit gripping.Closing and opening timesClosing and opening times are purely the times that the base jaws or fingers are in motion. Control or PLC reaction times are not included in the above times and must be taken into consideration when determining cycle times.General information on the seriesCentering sleevesElectrical accessories PAE terminal blockPAM standardconnecting elementsAccessoriesHybrid cableFor the exact size of the required accessories, availability of this size and the designation and ID, please refer to the additional views at the end of the size in question. You will find more detailed information on our accessory range in the …Accessories“ catalog section.PG 70· Universal Gripper1050Technical dataFinger loadMoments and forces apply per base jaw and may occur simultaneously. M y may arise in addition to the moment generated by the gripping force itself. If the max.permitted finger weight is exceeded, it is imperative to throttle the air pressure so that the jaw movement occurs without any hitting or bouncing. Service life may bereduced.Gripping force, I.D. grippingDescriptionPG 70Mechanical gripper operating data ID 0306090Stroke per finger [mm]35.0Constant gripping force (100 % continuous duty)[N]200.0Max. gripping force [N]200.0Min. gripping force [N]30.0Weight [kg] 1.4Recommended workpiece weight [kg] 1.0Closing time [s] 1.1Opening time [s] 1.1Max. permitted finger length [mm]140.0IP class20Min. ambient temperature [°C] 5.0Max. ambient temperature [°C]55.0Repeat accuracy [mm]0.05Positioning accuracy [mm]on request Max. velocity [mm/s]82.0Max. acceleration [mm/s 2]328.0Electrical operating data for gripper Terminal voltage [V]24.0Nominal power current [A] 1.8Maximum current [A] 6.5Resolution [µm] 1.0Controller operating data Integrated electronics Yes Voltage supply [VDC]24.0Nominal power current [A]0.5Sensor system EncoderInterfaceI/O, RS 232, CAN-Bus, Profibus DPPG 70Universal Gripper1051ᕃ24 VDC power supply provided by thecustomerᕄControl (PLC or similar) provided bythe customerᕅPAE 130 TB terminal block(ID No. 0307725) for connecting the power supply, the communication and the hybrid cableᕆHybrid cable for connecting thePowerCube modulesMain viewsThe drawing shows the gripper in the basic version with closed jaws, the dimensions do not include the options described below.ᕃGripper connection ᕄFinger connectionᕓᕗM16x1.5 for cable glandActuation DescriptionID Length PowerCube Hybrid cable, coiled 03077530.3 m PowerCube Hybrid cable, coiled03077540.5 mPowerCube Hybrid cable, straight (per meter)9941120The ‘Hybrid cable’ is recommended for the use in CAN-Bus- or RS232-systems. For Profibus applications we recommend to use a separate standardized Profibus cable for the communication.You can find further cables in the …Accessories“ catalog section.Interconnecting cablePG 70· Universal Gripper1052Special lengths on requestRight-angle standard element for connecting size 70 PowerCube modulesSpecial lengths on requestConical standard element for connecting size 70 and 90 PowerCube modulesSpecial lengths on requestStraight standard element for connecting size 70 PowerCube modules Right-angle connecting elements Description ID DimensionsPAM 120030782090°/70.5x98Conical connecting elements Description ID DimensionsPAM 110030781090x90/45/70x70 mm PAM 111030781190x90/90/70x70 mmStraight connecting elements Description ID DimensionsPAM 100030780070x70/35/70x70 mm PAM 101030780170x70/70/70x70 mmMechanical accessoriesYou can find more detailed information and individual parts of the above-mentioned accessories in the …Accessories“ catalog section.。
Panduit G5系列PDU及配件指南说明书
Best-in-Class Outlet Density Optimal Form Factors Superior Reliability TM TM TMPDU Pocket GuideWelcome to the Panduit G5 Series of PDU’s and AccessoriesQuality & Reliability 3-Year standardand 5-Year extended warranty.High Temperature Built with premium components to withstand 140°F (60°C) at full load.High Density Power Unique outlets design for high outlet density.Hot-Swappable & UpgradableHot-Swappable Controller with large OLED display.Hardened Security Enhanced security with certificate-based advanced asymmetric encryption, validated and hardened with multiple security scanning tools.1GB On Board Ethernet Connection Reduces deployment time and labor as PDU auto negotiates to 1GB network switches.Real-Time Monitor Real-time Monitoring of Power, Environmental & Cabinet Security.Plug & Play Accessories Variety Environmental & Cabinet Access Control Accessories.Multi-Device WebGUI Enhanced User-Experience with a self adjusting WebGUI that senses the device you are on.Multi-ColourA variety of coloured PDU chassis, power cords, and cable ties.2Product Families3Monitored Input (MI Series)Input power monitoring.Monitored Switched (MS Series)Input power monitoring and outlet switching.Monitored Per Outlet (MPO Series)Input and Outlet level power monitoring.Monitored & Switched Per Outlet (MSPO Series)Input and Outlet level power monitoring and outlet switching.Note: All intelligent PDU’s include environmental monitoring with rackaccess control.Basic PDU’sReliable power distribution (non-network).AccessoriesOffering a variety of Environmental Sensors; Security Devices and Power Cords.G5 iPDU4Low Profile Designsaves rack spaceIncrease airflowMetering+/- 1% billing-gradeaccuracyHigh DensityBest-in-Class outletdensity to match theincreased density ofrack IT equipmentHot-SwappableNetwork Modulewith Power ShareDaisy-Chain CapabilitiesUp to 4 PDU’sand 32 sensorsTemperature140°F (60°C) withFull Load Rating1-Phase5extreme temperaturesLocking IEC Outletswith Power Cords1GB Ethernetwith Redundant Network AccessColour Coded Outletsand Circuit Breakers™Security SmartZone ™ Security HandleUSB PortMonitored Input(MI Series)6Input Current ApparentPower Outlet1-Phase7Length Width Depth (mm)at Outlet PanduitMonitored Switched(MS Series)8Input Current ApparentPower Outlet1-Phase9Length Width Depth (mm)at Outlet PanduitMonitored Per Outlet(MPO Series)10Monitored and Switched Per Outlet(MSPO Series)Input Current ApparentPower Outlet11Length WidthDepth (mm)at Outlet PanduitInput CurrentApparentPower Outlet Basic Series121-Phase13(12)C1344.0443.5269.8P12B34MOutlet Type Length (mm)Width (mm)Depth (mm)at Outlet position Panduit Part No.AccessoriesSecurity & Environmental Accessories that connect directly to the G5 iPDU.Note: A maximum of 8 sensors can be managed by the Panduit SmartZone ™ G5 PDU controller. See User Manual for Complete Details.DescriptionDimensions L x W x H (in.)Length (ft.)Panduit Part No.Temperature Sensor1.73 x 0.83 x 0.436.56EA001Temperature + Humidity Sensor 1.73 x 0.83 x 0.436.56EB0013 Temperature + Humidity Sensor1.73 x 0.83 x 0.436.56EC001Water - Rope 2.36 x 2.36 x 0.87 6.56ED001Water - Spot2.36 x 2.36 x 0.8716.40EE0013 Sensor Hub3.35 x 1.26 x 1.06n/aEF001Water - Rope extensionn/a6.56EG001Door Switch (magnetic 2 piece) 1.73 x 0.83 x 0.43 (1.14 x 0.67 x 0.28for magnet) 3.28ACA01Dry Contact Input 1.73 x 0.83 x 0.439.84ACC01USB Light Strip15 x 1 x 0.55.0ACD01EA001EE001EB001EF001EC001EG001ED001ACA01ACC01ACD0114SmartZone™ Security Handle & Accessories that attach to the handle.DescriptionDimensionsL x W x H (in.)Length(ft.)PanduitPart No.SmartZone™ Security Handle with HumiditySensor and Card Readern/a n/a ACF05SmartZone™ Security Handle with HumiditySensor and Card Reader + Keypadn/a n/a ACF06 SmartZone™Handle T + Door Sensor n/a7.64ACF10 SmartZone™Handle 3T + Door Sensor n/a9.84ACF11 SmartZone™Handle to iPDU Harness n/a9.12ACF20ACF05ACF06ACF10ACF11ACF2015Accessories Dual Locking Power Cords(UL, CE, VDE, TUV Approved)Colour Description Ratings Gauge/Cross Section Area161-Phase C14C13 C14C13C14C13Length (meters)Part Number (10 pk)0.6LPCA01-X1.2LPCA02-X1.8LPCA03-X2.4LPCA04-X0.6LPCA06-X1.2LPCA07-X1.8LPCA08-X2.4LPCA09-X0.6LPCA11-X1.2LPCA12-X1.8LPCA13-X2.4LPCA14-X17Dual Locking Power Cords(UL, CE, VDE, TUV Approved)Colour DescriptionRatingsGauge/Cross Section AreaAccessories181-PhaseIEC C20IEC C19IEC C20IEC C19IEC C20IEC C19Length (meters)Part Number (10 pk)0.6LPCB01-X 1.2LPCB02-X 1.8LPCB03-X 2.4LPCB04-X 0.6LPCB06-X 1.2LPCB07-X 1.8LPCB08-X 2.4LPCB09-X 0.6LPCB11-X 1.2LPCB12-X 1.8LPCB13-X 2.4LPCB14-X19Complete Warranty & Compliance information can be found at *********************************。
SCALANCE XB004-1LD 6GK5004-1BF00-1AB2 10 100M 工业以太
/bilddb
● to website: CAx-Download-Manager
/cax
● to website: Industry Online Support
https://
EN 60079-0:2009, EN60079-15:2010, II 3 G Ex nA IIC T4 Gc, KEMA 07ATEX0145 X
certificate of suitability
● CCC / for hazardous zone according to GB standard Yes
standards, specifications, approvals / other
certificate of suitability
EN 61000-6-2, EN 61000-6-4
● C-Tick
Yes
● KC approval
Yes
further information / internet-Links
KFE
standards, specifications, approvals / CE
certificate of suitability / CE marking
Yes
standards, specifications, approvals / hazardous environments
standard / for hazardous zone
supply voltage, current consumption, power loss type of voltage / 1 / of the supply voltage ● supply voltage / 1 / rated value ● power loss [W] / 1 / rated value ● supply voltage / 1 / rated value ● consumed current / 1 / maximum ● type of electrical connection / 1 / for power supply ● product component / 1 / fusing at power supply input ● fuse protection type / 1 / at input for supply voltage type of voltage / 2 / of the supply voltage ● supply voltage / 2 / rated value
Leviton Wireless Decora 0-10V Room Controller with
Leviton Manufacturing Co., Inc. Lighting & Controls10385 SW Avery Street, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004 ©2022 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.DescriptionWireless Decora ® 0-10V Room Controller with 5A Relay (DL057) is the primary user interface combining both familiar toggle ON/OFF control, dimming control and energy management business logic into line voltage-powered wireless controldevices. Requires use with Lumina™ RF Keypad Room Controller or GreenMAX ® DRC Wireless Keypad Room Controller.The DL057 works with compatible wireless devices to create an advanced intelligent lighting system. The DL057 alsoprovides the primary interface between the smartphone/tablet commissioning and control device. The DL057 manages a room by coordinating activities of all wireless devices within thespace and can be used to control loads up to 5A.Wireless Decora ® 0-10V Dimmer Room Controller with 5A RelayApplications• Bluetooth interface for connection to any Android or iOS devices with Bluetooth 4.0 with BLE • Configuration • Control• Status monitoring • Every node is a repeater • Line voltage powered • LED status indicators • Decora aesthetic• Complies with IEEE 80.15.4 standards—for domestic and international wireless networks• Can be used to meet energy code requirements forIECC, ASHRAE 90.1 and 2019 Title 24, Part 6 space/area control, dimming, manual-ON/OFF, occupancy control and automatic shutoff requirementsDimensions DiagramWiring Diagram*Depending on manufacture date, pink wire may be grayUser InterfaceSpecificationsLES-G-10377B/H22-aaREV AUG 2022Leviton Manufacturing Co., Inc. Lighting & Controls10385 SW Avery Street, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004 ©2022 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.。
摩卡ThingsPro门限型号产品介绍和特点说明书
ThingsPro2IIoT Gateway and Device Management SoftwareSolutionFeatures and Benefits•Simplifies transfer of Modbus device data to the MQTT broker in cloudapplications•Built-in client and SDK support for online SCADA services•Built-in clients for popular cloud platforms Aliyun,AWS,and Azure•Network manager to connect your field devices to a WAN•RESTful API and Modbus API for access to all functions of the ThingsProGateway softwareIntroductionTo help accelerate development of your industrial IoT applications and create a smarter field site,Moxa’s ThingsPro Gateway software enables Modbus connectivity for data acquisition and processing,MQTT support for lightweight edge-to-cloud data transmission,and device configuration for system and network settings of supported edge gateways.Configuration just takes a few steps,allowing you to focus on your applications instead of complex integrations.ThingsPro Gateway helps you handle the complexity and diversity that comes from combining information technology and operational technology for industrial IoT applications by offering high-level Modbus APIs in C and Python,as well as modern RESTful APIs for you to easily develop software applications to extend or enhance the capabilities of Moxa’s Industrial IoT gateway.ThingsPro provides smart data acquisition,rapid development,and easy management,helping you create a smarter field site.Additional Features and Benefits•Modbus polling engine with easy-to-use web-based UI for data acquisition from end devices deployed in industrial field sites •Simplifies transfer of Modbus device data to the MQTT broker in cloud applications•Built-in client for popular PaaS(Platform as a Service)providers to accelerate your IIoT application development.Currently supports Sparkplug,AWS IoT Core,and Azure IoT Hub(only available in ThingsPro V2.3and above)•Built-in client/SDK support for online SCADA service,currently supports Sparkplug for the Ignition platform,and Wonderware Online (only available in ThingsPro V2.3and above)•Wireless manager tool handles the task of connecting your field devices to a WAN•RESTful API and Modbus API for access to all software functions of ThingsPro GatewaySystem ArchitectureEasy-to-use Modbus Data Acquisition•Every time you want to access a new Modbus device,just build a template once and then use it everywhere•Tag editor to set up unique identifiers for I/O points•Supports custom tag managementNetwork,Firewall,and System Configuration•Set up and monitor cellular strength•Support for keep-alive checks•Supports DHCP Server for Ethernet ports•Supports OpenVPN client to build a secure tunnel for data transmission to a remote server•Set up port-forwarding rules to create a simple firewall•Configure system settings such as time,GPS,serial ports,and GPS location though a web UI•Import system configuration from another ThingsPro GatewayModbus Slave and Third-party PaaS Platform Connectivity for Remote Data Acquisition•Enable Modbus slave to allow your local SCADA system to poll data from end devices that are attached to the ThingsPro Gateway•Set up an MQTT client to pub/sub your acquired data to/from any MQTT brokers•Supports other PaaS or online SCADA service with built-in client/SDK and UI:AWS IoT,Azure IoT Hub,Sparkplug for the Ignition platform,and Wonderware Online(only available in ThingsPro V2.3and above)Generic MQTT Client and Third-party MQTT Broker—SparkplugThingsPro supports the MQTT IoT protocol so that you can transfer fieldbus data to your cloud-based IoT applications.Client interfaces for generic MQTT communication and to the third-party MQTT broker,Sparkplug,are provided.Modbus and RESTful APIs for All Software Functions on ThingsPro Gateway•Modbus API via C and Python provides access to ready-to-run dataacquisition software functions•High-level RESTful API allows you to retrieve or set ThingsProGateway device status and resources for better interoperability•It is easier than ever to enhance or extend ThingsPro Gatewayfunctions and integrate them into your software applicationsFor details on how to develop programs that integrate with our ThingsPro Gateway software,refer to our programming guide at https:///User Role Account ManagementCreate administrator and user-level accounts to control access rights to device management functions.SpecificationsSystem RequirementsThingsPro GatewayEligible Devices-ListEligible DevicesSeriesModel Name Product VersionFirmware VersionMC-1100SeriesMC-1121-E2-T1.0.2 1.1MC-1121-E4-T 1.0.2 1.1MC-1121-E4-T-US 1.0.02.1UC-2100SeriesUC-2101-LX 1.0.0 1.4UC-2102-LX 1.0.0 1.4UC-2104-LX1.0.01.4UC-2111-LX 1.0.0 1.4UC-2112-LX 1.0.0 1.4UC-2112-T-LX 1.0.0 1.4UC-2100-W SeriesUC-2114-T-LX1.0.01.5UC-2116-T-LX 1.0.01.5UC-3100SeriesUC-3101-T-US-LX,UC-3101-T-EU-LX,UC-3101-T-AU-LX 1.0.0 1.1UC-3111-T-US-LX,UC-3111-T-EU-LX,UC-3111-T-AU-LX1.0.0 1.1UC-3121-T-US-LX,UC-3121-T-EU-LX,UC-3121-T-AU-LX 1.0.0 1.1UC-3101-T-US-LX 2.0.0 1.2UC-3111-T-US-LX 2.0.0 1.2UC-3121-T-US-LX 2.0.0 1.2UC-5100SeriesUC-5101-LX,UC-5101-T-LX 1.0.01.2UC-5102-LX,UC-5102-T-LX1.0.0 1.2UC-5111-LX,UC-5111-T-LX 1.0.01.2UC-5112-LX,UC-5112-T-LX1.0.0 1.2UC-8100Series UC-8112-LX 3.0.0 3.3UC-8100-ME-T SeriesUC-8112-ME-T-LX 3.0.0 3.0UC-8112-ME-T-LX1 4.0.0 3.0UC-8100A-ME-T SeriesUC-8112A-ME-T-LX1.0.01.3UC-8112A-ME-T-LX-AP1.0.0 1.3UC-8112A-ME-T-LX-US1.0.0 1.3UC-8112A-ME-T-LX-EU1.0.0 1.3UC-8200SeriesUC-8210-T-LX,UC-8210-T-LX-S1.0.0 1.1UC-8220-T-LX 1.0.0 1.1UC-8220-T-LX-US-S,UC-8220-T-LX-EU-S,UC-8220-T-LX-AP-S1.0.0 1.1Note:ThingsPro Gateway software supports only the firmware versions listed aboveon Linux Debian9.Check Moxa's website for the most up-to-date information.©Moxa Inc.All rights reserved.Updated Jul23,2020.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
UPC功能说明书
Standard Features:•Advanced Linear Amplifiers Provide Very Low Voltage Distortion, no Switching Noise, Fast Voltage and Current Slew Rates, Exceptionally Low Output Impedance and High Peak Current Capability• 1, 2, or 3 Phase Output Form selectable from front panel or bus command•20 to 5,000 Hz. Full Power Bandwidth Operation – 5Hz to 50KHz small signal bandwidth, 3dB at 10% of full voltage• Precision Voltage Programming – 0.05% with Continuous Self-Calibration (CSC) engaged • True-RMS Metering of Volts, Amps, and Power • GPIB (IEEE-488.2) or RS-232 Interface • Waveform Library – Arbitrary Waveform Generator• Up to 99 Programs with Associated Transients for Static and Dynamic Test Applications •UPC Studio Software SuiteAvailable Options:• Programmable Output Impedance• Harmonic Analysis and Waveform Synthesis • Peak Inrush Capture and Waveform Analysis (Available on models with UPC3 controller)•UPC Test Manager SoftwareUPC Manager Software SuiteMaster the Power of the Wave!UPC Manager Software gives you the tools neces-sary to quickly and easily operate your AC Power Source. With our graphical interface control all areas of your AC Power Source testing with simple presets, user prompts, test sequences, test plans and custom reports.Model 312AMXFREQUENCY CONVERSION R & D MANUFACTURING AEROSPACE MILITARYCUSTOM1, 2, or 1,200VA 20-5,000 HzModel 312AMXAs a member of Pacific Power’s AMX-Series popular family of high performance Linear AC Power Sources, the 312AMX offers the same low output voltage noise and distortion, ease of installation, and high AC waveform fidelity as found in all of Pacific Power’s Linear AC Power Sources. Control and operational features provide a high degree of versatility and ease of use for applications ranging from simple,manually controlled frequency conversion to harmonic testing and sophisticated programmable transient simulation.AC TEST POWERAll 312AMX models are equipped with a powerful micro-controller with the ability to operate as a fully integrated test system. This enables a variety of power conditions and transients to be applied to the device under test while metering and analyzing all output performance parameters. For higher power requirements, refer to the AMX & ASX series catalog.FREQUENCY/ VOLTAGE CONVERSIONThe 312AMX is an excellent source of stable AC Voltage over the frequency range of 20 to 5,000 Hz when using the high-end UPC-32 controller. Also available in 1,200 Hz maximum output frequency when using UPC3 or Manual controller. The output frequency is quartz-crystal stabilized. Output voltages up to 300V L-L in split phase mode and 260V L-L in three phase mode are available on the 312AMX model.PHASE CONVERSIONWith the ability to provide either single or two phase output, the 312AMX is a good choice to convert one-phase line voltage into precisely controlled split (two-phase) or three-phase output power.UPC SERIES CONTROLLERThree controller models are available in both manual and programmable control version. All controllers provide manual operation from the front panel. Programmable Controllers may be operated from the front panel or from a remote interface via RS 232 or GPIB.The Leader in AC Power TechnologyAn early pioneer in the development solid-state power conversion equipment, Pacific Power Source continues to develop, manufacture, and market both linear and high-performance PWM AC Power Sources. Pacific Power Source’s reputation as a market and technology leader is best demonstrated by its continuing investments in both research and development and world-wide customer support. With corporate owned offices in the United States, France, the United Kingdom, and China, local personalized support is always available.1Ø42Ø43Ø40-150V L-N 0-300V L-L0-150V L-N / 0-260V L-LNOTES:1. Rated output power is based on a combination of nominal output voltage, rated current and load power factor. Values stated represent the maximum capabilities of a given model (maximum power in split phase (Form2) direct coupled mode is 800VA). Consult factory for assistance in determining specific unit capabilities as they might apply to your application.2. Unit is operable as single phase with dual range capability or 3 phase. Output voltage range and 1/2/3 conversions are selected by front panel or bus commands.3. Vmax is output voltage with nominal input and full rated load applied.4. Available current will vary with output voltage and power factor. Current shown is per phase.Output RatingsThermal and Power Factor Rating CurvesAMX Power Source Specifications (PF = 1.0, V out > 25% F.S.)Input Power Requirements (47-63 Hz)312AMXOutput Frequency Line Regulation Load Regulation Ripple and Noise OUTPUT VOLTAGE-AC VOLTS RMSShort term overloads to 150% are permitted. Operating time before thermal shutdown or circuit breaker trip varies from sec-onds to several minutes depending upon line and temperature conditions.THERMAL RATING -AC CURRENT RMSShort tem overloads to 150% of rated current are permitted.Operating time before thermal shutdown or circuit breaker trip varies from seconds to several minutes depending upon line and temperature conditions.Rated Continuous Load Current as a Function of Ambient Temperature and Power Factor and Output Voltage at Nominal Input Line.The UPC Controlleris a highly versatile one, two, or threephase oscillator/signal generator designed to control any ofPacific Power’s AC Power Sources. Three controller models,UPC-3M, UPC-3, or UPC-32 are offered. To use the full 5KHz power bandwidth of the 312AMX, the UPC-32 controller isrequired.Controller ModelsOutput Control SpecificationsTotal Control, Metering, and Analysis of AC Power- Simple, Intuitive OperationWaveform ControlExternal Inputs/OutputsOutput MeteringUsing the front panel keyboard and display , all controllermodels provide for selection of power source output mode, cou-pling, voltage, and frequency. Selecting the correct UPC controller for a given application varies with your test requirement, desired features, and price.Both the UPC-3 and UPC-32 Controllers are available witheither RS-232 or GPIB remote interface. Commands are structured in accordance with SCPI (Standard Commands for Programmable Instruments).© 2012 Pacific Power Source, Inc. Subject to change without notice. #DS312AMX101217692 Fitch, Irvine, CA 92614 USAPhone: +1 949.251.1800 Fax: +1 949.756.0756 T oll Free: 800.854.2433E-mail:**********************19" (483mm)Ordering InformationAvailable Models312AMX-UPC3M312AMX-UPC3312AMX-UPC32 General/EnvironmentalMechanical SpecificationsSoftware/Firmware OptionsProtection and SafetyOrder Example312AMX-UPC32, V IN : 120VAC • 1,200VA, 3-Phase, AC Power Source with UPC-32 programmable controller.• Standard GPIB Interface•120VAC, 1 Phase Input VoltageTypical Delivery Items• AC Power Source• English Manuals (AC Source and Controller)• UPC Studio Software - (Download)• UPC Interactive LabVIEW TM Libraries (Download)• Compliance Certificate with Test data •CE Conformity Document (CE Models)。
Additel 761A自动高压测量仪说明书
Series Automated Pressure CalibratorsAdditel 761AAutomated and self-contained pressure generation and control to 1,000 psi ( 70 bar)Standard accuracy to 0.02%FSOptional precision accuracy models to 0.01%FSTwo removable internal pressure modules for multi-range selection Control stability to 0.003%FSPortable, designed for use in the field and in the lab Ability to measure two external pressure modules Wi-Fi, Bluetooth, USB and Ethernet communication HART and profibus communication Data logging and task managementPatented electric pump technology and improved speed OVERVIEWAt Additel, innovation and continuous improvement are part of our company's culture and the products we introduce. When we set out to deliver the Additel 761A series calibrators, we knew we needed to provide breakthrough improvements and additional value to the existing line of calibrators (Additel 761 series). The ADT761A has many improvements: increased pressure range to 1,000 psi (70 bar), removable internal pressure modules, optional precision models to 0.01%FS, increased speed to pressure, ability to read two external pressure modules, touch screen display, Wi-Fi, Bluetooth, and Ethernet communications, double the original battery life, and more!Just like the first generation, this second generation product is completely self-contained and automated with a built-in pump for pressure generation and precision control technology. Simply set the desired pressure and watch the calibrator do thework.ADT761A-LLPThe Additel 761A-LLP is designed for low pressure calibration and comes with a ±30 inH2O (±75 mbar) high range module and a low range module of your choice ranging from ±20 inH2O to as low as ±0.25 inH2O (±50 to ±0.62 mbar). This unit has an accuracy of 0.05%FS with control stability better than 0.005%FS. All measurements can be made in differential or gaugepressures.ADT761A-DThe Additel 761A-D also provides differential and gauge measurement which covers the range of -13.5 to 35 psi (-0.95 to 2.5 bar). This unit comes with a CP35 module (-13.5 to 35 psi) and one low range module of your choice rangeing as low as ±10 inH2O (25 mbar). Each ADT761A-D can be preconfigured with the modules that fit your need to give you the best precision at the pressures you perform calibrations.ADT761A-500The Additel 761A-500 will generate and control from vacuum pressures upto 500 psig (35 bar.g). Both gauge and absolute pressures can be realizeddue to a built-in barometer. Each unit comes with a CP500 module (-13 to500 psig) for the high range and the low range can be preconfigured basedon the variety of modules available down to 10 psig (0.7 bar.g).ADT761A-1KThe Additel 761A-1K will generate and control from vacuum pressures up to 1,000 psig (70 bar.g). This unit can typically achieve 1,000 psi in less than 45 seconds. Like the ADT761A-500, both gauge and absolute pressures can be realized due to a built-in barometer. Each unit comes with a CP1K module (-13 to 1,000 psig) for the high range and the low range can be preconfigured based on the variety of modules available down to 30 psig (2 bar.g).ADT761A-APXR Precision Accuracy OptionsThe Additel 761A series includes a precision accuracy option whichprovides an accuracy of 0.01%FS. This calibrator option includes a singlenon-removable sensor and can measure absolute and gauge pressures.Model configurations are available from 15 to 1,000 psig (1 to 7 bar.g).ADT761A-BPThe Additel 761A-BP is designed for calibration of barometer sensors. Witha range of 100 to 1200 hPa and an accuracy of 0.01%FS, this unit is idealfor calibration on the bench or in the field.Pressure SpecificationsElectrical Specifications[1] One year accuracy (including 1 year stability). FS specification applies to the span of the module range.[2] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode. Applicable only for use with the ADT761A-500 and ADT761A-1K* Additel 761A calibrators support 160A series intelligent digital pressure modules that are available for gauge, vacuum and absolute pressure from -15 psi to 60,000 psi (-1 bar to 4200 bar). For detailed specifications refer to the 160A series pressure modules data sheet.Internal Module Specification and Compatibility[1] FS specification applies to the span of the module range. Accuracy includes one-year stability, except for DP025 to DP10 modules.[2] Accuracy is a 6 months spec, 1-year long-term drift is 0.2%FS.[3] Accuracy is a 6 months spec, 1-year long-term drift is 0.1%FS.[4] Accuracy is a 6 months spec, 1-year long-term drift is 0.05%FS.[5] Specification based on gauge measurement. An additional 60 pa uncertainty will need to be included when measuring in absolute mode.Applicable only for use with the ADT761A-500 and ADT761A-1KPressure gauge / transmitter / switch calibrationGeneral SpecificationsPressure RangeHigh-Range Pressure ModuleLow-Range Pressure Module Accuracy RangeAccuracyDP30: -75 to 75 mbar 0.05%FSUser selectable fromDP20 to DP025See Internal ModuleTable CP35: -0.95 to 2.5 bar 0.02%FSUser selectable from DP10 to CP30See Internal ModuleTable Task ManualHigh Pressure Automated CalibrationORDERING INFORMATIONModel NumberNPressure Range。
Door King Model 9310-085 Slide Gate 说明书
100101102103120969437381051062X 2X 1072X 969696959997961602X Ref Ref Ref Ref 8198REVISIONSEOREV DESCRIPTION Drawn APPR ---H Item 55 Was: 2600-469.Sal 10/30/08 D.C.10/30/08H IPB-Model 9310-085, Slide Gate, 1/2 HP, 460V, Convenient Open PROPRIETARY AND CONFIDENTIAL COMMENTS:SHEET 1 OF 8CHECKED DRAWN DATENAME REV A DWG. NO.SIZE Scale: None 9310-885Sal 02/19/083. Warning Signs, Tubing, Wire Sets, & Manual (Items 170-178) Not Shown for Clarity.2Apply Loctite (XX-24231) as indicated. 1. See attached reference sheet for BOM; Reference Movex 9310-085 Rev H.Notes: Unless Otherwise Specified.THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF Door King. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF Door King IS PROHIBITED.Item Part Number Qty UM Description Rev 19310-8851EA IBP-Slide Gate Operator 1/2 HP, 460V, Convenient Open H 39310-3041EA Base 931042600-3051EA Base Stiffener Model 930059310-1061EA Box Control 931062600-3181EA Bracket Wire Cover82600-3501EA Gearbox LIM-60D 10:1 931092600-1561EA Motor 1/2 HP C Face Emerson112600-2191EA Pulley - 1 3/4 OD x 5/8 Shaft122600-3651EA Lock Sprocket Nylon ST801132600-9082EA Magnet Rectangular142600-3661EA Sprocket 12 tooth 1" Bore #41169310-1091EA Bracket Idler 9310172600-8882EA Bushing 9300 1.5L x1.0 OD x .63 ID182600-3982EA Idler Chain192600-1971EA Motor 24VDC For BB202600-6991EA Belt 23" 4L230212600-3031EA Bracket Battery Holder 9300221801-0092EA Battery 12V 3.0 AmpHour PS1230232599-2201EA Label Caution Remove Rod244001-0961EA Transformer 460/230/208-115V252600-6194EA Wire Clp-5/8 Concord 770-1209262600-9451EA Cover Plastic Insulator272600-8201EA Bushing 1/2309310-3901EA Panel Solenoid 9310312600-8751EA Capacitor Mounting Clamp322600-1021EA Capacitor 50uf 370VAC332600-2391EA Capacitor Clamp VR6B342600-2341EA Capacitor 30uf 370VAC352600-8611EA Solenoid Lock Assy 9310374001-0351EA Lock N16058BDxSFx2K Key 16120381702-5071EA Cam "J" Hook409310-1031EA Cover Solenoid Panel 9310412600-4131EA Terminal Block-3 Position422599-0381EA Label Radio 9310439310-0061EA Cover Plastic504001-0201EA Terminal 20 Pin514001-0211EA Key Polarizing Tyco 1437410-5522340-0101EA PCB Battery Backup534403-0101EA PCB Gate Operator552600-4731EA Marker Strip 460V 3Phase563130-0081EA Terminal Block 5 pin574001-0931EA MOV Assembly 130VAC584001-0941EA MOV Assembly 3 Phase 510VAC593129-0051EA Terminal Block Cover 5 Positio602599-0141EA Decal Copper Wire Only612599-0061EA Decal SUPPLY GND632600-4391EA Washer Cup - Brass652600-81028EA Bushing 7/8 Poke Thru Flaps701200-0282EA Outlet Snap-In Leviton 1306712599-0081EA Label Patent721215-0181EA Wire Nut #71B732600-7532EA Wire Crimp On #9 Full Insul 752600-2462EA Limit Nut762600-2481EA Limit Nut w Magnet Assembly 802599-0961EA Label Key Model 9310811812-0052EA Switch Push Button N.O. 832600-3071EA Bracket Wheel Lock 9300 852600-8572EA Spring-Compression Limits 861804-0242EA Switch Micro No NC C909310-3001EA Bracket Partial Limit 9310 919310-3011EA Bracket Partial Limit Mt. 9310 921601-2561EA Switch Magnetic Sensor 949310-1021EA Bracket Switch 9310952600-7311EA Gasket Switch Cover962600-5331EA Switch Cover Doorking Lockable 971506-0711EA Tone Generator Loud981601-0411EA Switch Toggle SPST 2POS 991601-1401EA Switch Toggle 2 Pole On-Off 1002600-5051EA Cover Operator 9310 1/2 Hp 1012600-7931EA Hole Plug Blk Nylon 1.00" dia. 1022599-1991EA Label Universal1032599-0341EA Label Gate Operator1052600-7321EA Nameplate Plastic DKS 1062802-0402EA Washer Push on Clamp 1071897-0522EA Gasket, Microphone Support 1102630-0111EA Snap Ring 1" #3100-100ZD 1112630-0152EA Snap Ring 5/8" 5100-62-ZY 1202615-25210EA Bolt Whiz Lock 5/16-18 x 1/2 1212615-0526EA Bolt Hex Head 3/8-16 x 1 1222615-0554EA Bolt Hex Head 3/8-16 x 1 1/2 1232615-0352EA Bolt Hex Head 5/8-11 x 2 1/2 1242615-0312EA Bolt Hex Head 5/8-11 x 1 1252615-0024EA Bolt Hex Head 1/4-20 x 1/2 1302620-4114EA Nut Hex Flange Lock 5/16-18 1312620-4354EA Nut Hex 5/8-111322620-4054EA Nut Hex 3/8-161332902-0043EA Nut Nylon Lock 8-321342620-40013EA Nut Hex 6-321352620-4094EA Nut Hex Flange Lock 1/4-20 1362620-3992EA Nut Hex 00-90 Brass Zinc Plt 1372620-3404EA Nut Center Lock 1/4-20 1402620-04712EA Lockwasher 3/81422620-0494EA Lockwasher 5/81432620-0442EA Lockwasher #81442802-0023EA Washer #6 SAE1452802-0032EA Washer #8 SAE1462620-1094EA Washer 1/4 Split Lock1502904-0012EA Screw Round Head 4-40 x 1/4 1512616-0172EA Screw Phillips Head 8-32 x 3/8 1522616-0006EA Screw Phillips Head 6-32 x 1/4 1532616-0183EA Screw Phillips Head 8-32 x 1/21542616-0022EA Screw Phillips Head 6-32 x 1/2 1552616-0034EA Screw Phillips Head 6-32 x 3/4 1562904-0034EA Screw Round Head 4-40 x 1/2 1572616-0194EA Screw Phillips Head 8-32 x 3/4 1582616-0072EA Screw Phillips Head 6-32 x 5/8 1592616-0004EA Screw Phillips Head 6-32 x 1/4 1602616-0512EA Screw Phillips 10-32 x 3/81612616-0312EA Screw Flat Head #0-90 x 1/4 Slot 1709300-0431EA Wire Set 9310 115/230 Single Phase 1712340-1641EA Wire Set BB 6100,6300,9150 1727082-1921EA Wire Blue 18AWG 24"1737082-1931EA Wire MiniFit Recept Start Cap 1747082-3051EA Wire 14" Violet 187 Fast/Diode 1752600-8581EA Accessory Box 9300 Operator 1762599-1002EA Sign Warning1779402-05312IN Tubing Flex/Slit 1/4OD1789310-0651EA Manual。
AMQB24-1 商品说明书
AMQB24-1FootnotesBasic Non Fail-Safe actuator for controlling dampers in typical commercial HVAC applications.• Torque motor 140 in-lb [16 Nm]• Nominal voltage AC/DC 24 V • Control On/OffTechnical dataElectrical dataNominal voltageAC/DC 24 V Nominal voltage frequency 50/60 HzNominal voltage rangeAC 19.2...28.8 V / DC 21.6...28.8 V Power consumption in operation 15 W Power consumption in rest position 1.5 W Transformer sizing 26 VAElectrical Connection18 GA plenum cable, 1 m, with 1/2" NPTconduit connector, degree of protection NEMA 2 / IP54Overload Protectionelectronic throughout 0...95° rotation Functional dataTorque motor140 in-lb [16 Nm]Direction of motion motor selectable with switch 0/1Manual override external push button Angle of rotation Max. 95°Angle of rotation note adjustable with mechanical stop Running Time (Motor)7 s / 90°Running time motor note constant, independent of load Running time motor variable 10, 15 or 20 s Noise level, motor 52 dB(A)Position indicationMechanical, 30...65 mm stroke Safety dataPower source ULClass 2 Supply Degree of protection IEC/EN IP54Degree of protection NEMA/UL NEMA 2Enclosure UL Enclosure Type 2Agency ListingcULus acc. to UL60730-1A/-2-14, CAN/CSA E60730-1:02CE acc. to 2014/30/EU and 2014/35/EU Quality Standard ISO 9001UL 2043 CompliantSuitable for use in air plenums per Section 300.22(C) of the NEC and Section 602 of the IMCAmbient humidity Max. 95% RH, non-condensing Ambient temperature -22...122°F [-30...50°C]Storage temperature -40...176°F [-40...80°C]Servicingmaintenance-free Weight Weight4.2 lb [1.9 kg]MaterialsHousing material UL94-5VA†Rated Impulse Voltage 800V, Type action 1, Control Pollution Degree 3.AMQB24-1ApplicationOperationTypical specificationProduct featuresFor On/Off control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications. The actuator is mounted directly to a damper shaft up to 1.05” in diameter by means of its universal clamp. A crank arm and several mounting brackets are available for applications where the actuator cannot be direct coupled to the damper shaft.The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement.The AMQB(X) series provides 95° of rotation and a visual indicator indicates position of theactuator. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover.The AMQB(X)24-1 actuators use a sensorless brushless DC motor, which is controlled by an Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode.Add-on auxiliary switches or feedback potentiometers are easily fastened directly onto the actuator body for signaling and switching functions.Modulating control damper actuators shall be electronic direct coupled type, which require no crank arm and linkage and be capable of direct mounting to a shaft up to 1.05” diameter. Actuators must provide modulating damper control in response to a 2 to 10 VDC or, with the addition of a 500 Ω resistor, a 4 to 20 mA control input from an electronic controller orpositioner. Actuators shall have brushless DC motor technology and be protected from overload at all angles of rotation. Actuators shall have reversing switch and manual override on the cover. Run time shall be constant and independent of torque. Actuators shall be cULus listed, have a 5-year warranty, and be manufactured under ISO 9001 International Quality Control Standards. Actuators shall be as manufactured by Belimo.AccessoriesElectrical accessoriesDescriptionType Battery backup system, for non-spring return models NSV24 US Battery, 12 V, 1.2 Ah (two required)NSV-BAT Auxiliary switch 2x SPDT add-onS2AAMQB24-1Mechanical accessoriesDescriptionTypeClamp NM/AM 1/2", 3/4", 1"K-AM25Shaft clamp reversible, clamping range ø10...20 mm K-SA Mounting bracket for AF..ZG-100Mounting bracket ZG-101Mounting bracket ZG-103Mounting bracketZG-104Mounting kit for linkage operation for flat installation ZG-NMA 1" diameter jackshaft adaptor (11" L).ZG-JSA-11-5/16" diameter jackshaft adaptor (12" L).ZG-JSA-21.05" diameter jackshaft adaptor (12" L).ZG-JSA-3Baseplate extension for SM..A to SM../AM../SMD24R Z-SMA Weather shield 13x8x6" [330x203x152 mm] (LxWxH)ZS-100Weather shield 406x213x102 mm [16x8-3/8x4"] (LxWxH)ZS-150Explosion proof housing 16x10x6.435" [406x254x164 mm] (LxWxH), UL and CSA, Class I, Zone 1&2, Groups B, C, D, (NEMA 7), Class III, Hazardous (classified) LocationsZS-260Weather shield 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH), NEMA 4X, with mounting bracketsZS-300Weather shield 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH), NEMA 4X, with mounting bracketsZS-300-5Terminal-strip cover for NEMA 2 rating (-T models).ZS-T Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm AV8-25Actuator arm for standard shaft clampAH-GMA Wrench 0.32 in and 0.39 in [8 mm and 10 mm]TOOL-06Linkage kitJackshaft Retrofit Linkage with Belimo Rotary ActuatorsZG-JSLElectrical installationProvide overload protection and disconnect as required.Actuators may also be powered by DC 24 V.Actuators may be connected in parallel if not mechanically linked. Power consumption andinput impedance must be observed.On/OffAMQB24-1 Dimensions。
中欧minimba学员手册
中欧minimba学员手册【原创实用版】目录1.中欧 minimba 学员手册概述2.手册中的课程内容3.学员须知与课程要求4.课程结构与教学方法5.评估与证书6.中欧 minimba 的价值与优势正文中欧 minimba 学员手册概述中欧 minimba（中欧国际工商学院迷你 MBA）学员手册是为了帮助学员更好地了解课程内容、课程结构、教学方法以及评估方式而制定的。
本手册将从课程内容、学员须知与课程要求、课程结构与教学方法、评估与证书、中欧 minimba 的价值与优势等方面进行详细介绍。
手册中的课程内容中欧 minimba 课程涵盖了商业领域的核心知识，包括市场营销、组织行为、战略管理、财务管理等多个方面。
课程设置旨在帮助学员全面了解商业运作，提升管理能力，并为今后的职业发展奠定坚实基础。
学员须知与课程要求为了确保学员能够顺利完成中欧 minimba 课程，学员须知部分对学员的学术背景、语言能力、学习态度等方面提出了要求。
此外，课程还要求学员按时完成作业、参与课堂讨论、完成小组项目等任务。
课程结构与教学方法中欧 minimba 课程采用模块化教学，每个模块包括若干主题。
课程采用讲授、案例分析、小组讨论等多种教学方法，旨在提高学员的理论水平和实践能力。
此外，课程还邀请了业界专家、企业家等进行讲座，让学员了解商业实践的最新动态。
评估与证书中欧 minimba 课程的评估方式包括平时作业、课堂参与、小组项目、期末考试等。
学员在完成所有课程并达到考核要求后，将获得中欧国际工商学院颁发的迷你 MBA 证书。
中欧 minimba 的价值与优势中欧 minimba 课程具有以下价值与优势：首先，课程内容全面，覆盖商业领域的核心知识；其次，课程结构合理，注重理论与实践相结合；第三，教学方法多样，满足不同学员的学习需求；最后，中欧国际工商学院的品牌效应，为学员提供优质的教育资源和广阔的发展前景。
西部数据HP 33120A波形生成器说明书
HUncompromising performance for standard waveformsThe HP 33120A function/arbitrary waveform generator uses direct digital-synthesis techniques to create a stable, accurate output signal for clean, low-distortion sine waves. It also gives you fast rise-and fall-time square wave, and linear ramp waveforms down to10mHz.Custom waveform generationUse the HP 33120A to generate complex custom waveforms such as a heartbeat or the output of a mechanical transducer. With 12-bit resolution, and a sampling rate of 40MSa/s, the HP 33120A gives you the flexibility to create any waveform you need. It also lets you store up to found 16,000-deep waveforms in nonvolatile memory. Easy-to-use functionalityFront-panel operation of theHP33120A is straightforward and intuitive. You can access any often major functions with a single key press or two, then use a simple knob to adjust frequency, amplitude and offset. To save time, you can enter voltage values directly in Vp-p, Vrms or dBm. Internal AM, FM,FSK and burst modulationmake it easy to modulatewaveforms without theneed for a separatemodulation source.Linear and log sweeps arealso built in, with sweeprates selectable from 1msto 500s. HP-IB and RS-232interfaces are both standard,plus you get full programmabilityusing SCPI commands.Optional phase-lock capabilityThe Option 001 phase lock/TCXOtimebase gives you the ability togenerate synchronized phase-offsetsignals. An external clockinput/output lets you synchronizewith up to three other HP 33120Asor with an external 10-MHz clock.Option 001 also gives you aTCXO timebase for increasedfrequency stability. With accuracyof 4 ppm/yr, the TCXO timebasemake an HP 33120A ideal forfrequency calibrations and otherdemanding applications.With Option 001, new commandslet you perform phase changes onthe fly, via the front panel or from acomputer, allowing precise phasecalibration and adjustment.Link the HP 33120A to your PCTo further increase yourproductivity, use the HP 33120A inconjunction with HP 34811ABenchLink Arb software. TheWindows®-based program lets youcreate and edit waveforms on yourPC and download them to yourHP33120A with the click of a mouse.Create complex waveforms in amath or statistics program--or usethe freehand drawing tool--then passthem into HP BenchLink Arb. Use inconjunction with HP BenchLinkScope, the software also lets youcapture a waveform with your HPoscilloscope or DMM and send it toyour HP 33120A for output.3-year warrantyWith your HP 33120A, you getoperating and service manuals, aquick reference guide, test date,and a full 3-year warranty, all forone low price.HP 33120A Function/ArbitraryWaveform GeneratorCreate custom waveforms easily and affordably • 15 MHz sine and square wave outputs• Sine, triangle, square, ramp, noise and more• 12-bit, 40MSa/s, 16,000-point deep arbitrary waveforms • Direct Digital Synthesis for excellent stabilityWaveformsStandard Sine, square, triangle,ramp, noise, sin(x)/x,exponential riseexponential fall, cardiac,dc volts.ArbitraryWaveform length8 to 16,000 points Amplitude resolution12 bits (including sign) Sample rate40 MSa/sNon-volatile memory Four (4) 16,000 waveforms Frequency CharacteristicsSine100 µHz - 15 MHz Square100 µHz - 15 MHz Triangle100 µHz - 100 kHz Ramp100 µHz - 100 kHz White noise10 MHz bandwidth Resolution10 µHz or 10 digits Accuracy10 ppm in 90 days,20 ppm in 1 year,18°C - 28°CTemp. Coeff< 2 ppm/°CAging< 10 ppm/yr Sinewave Spectral PurityHarmonic distortiondc to 20 kHz-70 dBc20 kHz to 100 kHz-60 dBc100 kHz to 1 MHz-45 dBc1 MHz to 15 MHz-35 dBcSpurious (non-harmonic)DC to 1 MHz< -65 dBc1 MHz to 15 MHz< -65 dBc + 6 dB/octave Total harmonic distortionDC to 20 kHz<0.04%Phase noise<-55 dBc in a 30 kHz band Signal CharacteristicsSquarewaveRise/Fall time< 20 nsOvershoot4%Asymmetry1% + 5nsDuty cycle20% to 80% (to 5 MHz)40% to 60% (to 15 MHz) Triangle, Ramp, ArbRise/Fall time40 ns (typical) Linearity<0.1% of peak output Setting Time<250 ns to 0.5% offinal valueJitter<25nsOutput CharacteristicsAmplitude (into 50Ω)50 mVpp - 10 Vpp [1]Accuracy (at 1 kHz)±1% of specified outputFlatness (sinewave relative to 1 kHz)< 100 kHz±1% (0.1 dB)100 kHz to 1 MHz±1.5% (0.15 dB)1 Mz to 15 MHz±2% (0.2 dB) Ampl≥3Vrms±3.5% (0.3 dB) Ampl<3VrmsOutput Impedance50Ω(fixed)Offset (into 50Ω) [2]+ 5 Vpk ac + dcAccuracy±2% of setting + 2 mVResolution 3 digits, amplitude andoffsetUnits Vpp, Vrms, dBmIsolation42 Vpk maximum to earthProtection Short circuit protected±15Vpk overdrive < 1 minuteModulationAMCarrier -3dB Freq.10 MHz (typical)Modulation any internal waveformincluding ArbFrequency10 mHz - 20 kHzDepth0% - 120%Source Internal/ExternalFMModulation any internal waveformincluding ArbFrequency10 mHz - 10 kHzDeviation10 mHz - 15 MHzSource Internal onlyFSKInternal rate10 mHz - 50 kHzFrequency Range10 mHz - 15 MHzSource Internal/External(1 MHz max.)BurstCarrier Freq. 5 MHz max.Count 1 to 50,000 cyclesor infiniteStart Phase-360°to +360°Internal Rate10 mHz - 50 kHz ±1%Gate Source Internal/External GateTrigger Single, External orInternal RateSweepType Linear or LogarithmicDirection Up or DownStart F/Stop F10 mHz - 15 MHzSpeed 1 ms to 500 s ±0.1%Trigger Single, External, or InternalRear Panel InputsExt. AM Modulation±5 Vpk = 100% modulation5kΩinput resistanceExternal Trigger/TTL low trueFSK/Burst GateSystem Characteristics[3]Configuration Times[4]Function Change:[5]80 msFrequency Change:[5]30 msAmplitude Change:30 msOffset Change:10 msSelect User Arb:100 msModulation ParameterChange:<350 msArb Download Times over HP-IBArb Length Binary ASCII Integer ASCII Real[6]16,000 points8 sec81 sec100 sec8,192 points 4 sec42 sec51 sec4,096 points 2.5 sec21 sec26 sec2,048 points 1.5 sec11 sec13 secArb Download Times over RS-232 at 9600 Baud:[7]Arb Length Binary ASCII Integer ASCII Real[8]16,000 points35 sec101 sec134 sec8,192 points18 sec52 sec69 sec4,096 points10 sec27 sec35 sec2,048 points 6 sec14 sec18 sec[1] 100 mVpp - 20 Vpp into open circuit[2] Offset ≤2x pk - pk amplitude[3] Times are typical. May vary based on controllerperformance[4] time to change parameter and output the new signal.[5] Modulation or sweep off.[6] Times for 5-digit and 12-digit numbers.[7] For 4800 baud, multiply the download times by two;For2400 baud, multiply the download times by four, etc.[8] Time for 5-digit numbers. For 12-digit numbers, multiplythe 5-digit numbers by two.2Option 001 Phaselock/TCXO TimebaseTimebase AccuracySetability< 0.01 ppmStability±1 ppm 0°- 50°Aging< 2ppm in first 30 days(continuous operation)0.1 pm/month(after first 30 days)External Reference InputLock Range10 MHz ±50 HzLevel-10 dBm to + 15 dBm+25 dBm or 10 Vpp maxinputImpedance50Ω±2%, 42 Vpk isolationto earthLock Time< 2 secondsInternal Reference OutputFrequency10 MHzLevel> 1 Vpp into 50 ΩPhase OffsetRange+ 360°to - 360°Resolution0.001°Accuracy25 nsTrigger OutputLevel5V zero-going pulse Pulse Width> 2µs typicalFanout Capable of driving up tothree 33120AsOrdering InformationHP 33120A Function/Arb GeneratorOpt. 001 Phase Lock/TCXO Timebase OptionGeneralPower Supply110V/120V/220V/240V ±10% Power Line Frequency45 Hz to 66 Hz and 360 Hzto 440 HzPower Consumption50VA peak (28 W average) Operating Environment0°C to 55°CStorage Environment-40°C to 70°CState Storage Memory Power Off stateautomatically saved, 3 UserConfigurable Stored States Interface IEEE-488 and RS-232standardLanguage SCPI - 1993, IEEE-488.2 Dimensions (W x H x D)Bench top254.4mm x 103.6mm x374mmRack mount212.6mm x 88.5mm x348.3mmWeight 4 kg (8.8 lbs)Safety Designed to UL-1244, CSA 1010,EN61010EMC Tested to MIL-461C, EN55011,EN50082-1Vibration and Shock MIL-T-28800, Type III,Class5Acoustic Noise30 dBaWarm-up Time 1 hourWarranty3 years standard3Ordering InformationHP 33120A Function/Arbitrary Waveform GeneratorAccessories includedOperating manual, service manual, quick reference guide, test data, and power cord.OptionsOpt. 001Phase lock/TCXO timebaseOpt. 106HP BenchLink Arb software (HP 34811A)Opt. 1CM Rack Mount Kit (P/N 5062-3972)*Opt. W50Additional 2-year warranty (5-year total)Opt. 910Extra manual setManual language options (please specify one)ABA US English ABD German ABE Spanish ABF French ABJ Japanese ABZ ItalianABO Taiwan Chinese AB1 KoreanAccessoriesHP 34161A Accessory pouchHP 34811A BenchLink Arb software*For racking two side-by-side, order both items below Lock-link Kit (P/N 5061-9694)Flange Kit (P/N 5062-3974)HData subject to change.Printed in the U.S.A. 8/98© Hewlett-Packard Company 1998Windows is a registered trademark of Microsoft Corporation.5968-0125ENFor more information about HP’s waveform generators and all other Hewlett-Packard basic instruments, and for a current sales office listing, visit our web site at /go/tmdir.You can also contact one of the following centers and ask for a test and measurement sales representative.United States:Hewlett-Packard CompanyTest and Measurement Call Center P.O. Box 4026Englewood, Colorado 80155-4026180****4844Canada:Hewlett-Packard Canada Ltd.5150 Spectrum Way Mississauga, Ontario L4W 5G1(905) 206 4725Europe:Hewlett-PackardEuropean Marketing Centre P.O. Box 9991180 AZ Amstelveen The Netherlands (31 20) 547 9900Japan:Hewlett-Packard Japan Ltd.Measurement Assistance Center 9-1, Takakura-Cho, Hachioji-Shi,Tokyo 192, Japan Tel: (81) 426 56 7832Fax: (81) 426 56 7840Latin America:Hewlett-PackardLatin American Region Headquarters 5200 Blue Lagoon Drive 9th FloorMiami, Florida 33126U.S.A.Tel: (305) 267-4245(305) 267-4220Fax: (305) 267-4288Australia/New Zealand:Hewlett-Packard Australia Ltd.31-41 Joseph StreetBlackburn, Victoria 3130Australia 1 800 629 485Asia Pacific:Hewlett-Packard Asia Pacific Ltd.17-21/F Shell Tower, Times Square,1 Matheson Street, Causeway Bay,Hong KongTel: (852) 2599 7777Fax: (852) 2506 9285。
KMB+K Precision程序可编程直流电源说明书
B+K Precision ®models 9120A,9121A,9122A,9123A and 9124are laboratory grade Programmable DC Power Supplies providing great performance and features not found in other supplies in this price category.The 9120series are designed to meet the needs of today’s applications in R&D design verification,production testing or university labs that require clean and reliable power,high resolution and accuracy and fast transient response time.IExcellent display resolution I Low ripple and low noiseI Outstanding temperature stabilityI Fast transient response time (<150µs)I SCPI compatibleI Front and Rear Output T erminals I Closed case calibrationI Compact size for bench use or rack mountable (2U x 1/2U size)I List mode operation for increased throughput.Download and execute command sequences from non-volatile memory91244mm sheathed safety banana jacksOutput ON/OFF switchEncoder knob for quick analog style controlNumeric keys for direct entry of voltage and current valuesHigh resolution displayFront Panel OperationThe numeric keys and rotary knob provide a convenient interface for setting output levels quickly and precisely.Voltage and Current can be set to a maximum resolution of 0.5mV (2mV for 9124)and 0.1mA respectively.Up to 50parameters can be stored and recalled from internal memory.Data sheetTechnical data subject to change ©B&K Precision Corp.2008v031609Single Output Programmable DC Power SuppliesModels 9120A, 9121A, 9122A, 9123A & 9124DVM and m ΩmeterUser accessible fuseT emperature controlled cooling fan Serial interface connector for RS232 or USB communication.(USB communication cable is optional).Model 9123A also supports control via GPIB interface.Remote Sense and digital port functionalityThe 9120 series uses 4mm sheathed banana jacks that accept sheathed or shrouded banana plugs and meet the latest international safety standards.Extra FeaturesThe 9120 series’ digital port offers a variety of configurations. The port can operate in Digital I/O,external Trigger and DFI/RI (Discrete FaultIndicator/Remote Inhibit) mode. The RI feature can be used for turning several power supplies On/Off simultaneously. External triggering can be used in combination with List mode.The included Application Software supports front panel emulation and allows users to generate simple test sequences without the need to write source code.Additionally, the power supply comes with a built-in 51/2 digit DVM and high resolution milliohm meter supporting 4 wire measurements.Remote InterfaceThe power supplies can be remotely controlled from any PC with USB or RS232 interface, allowing the user to program and monitor all parameters through easy to use SCPI commands.The power supplies come with a RS232 to TTL serial converter cable. A USB to serial converter cable is available as option. Additionally, model 9123A can be controlled via GPIB interface and includes a GPIB to TTL conversion adapter cable.2Single Output Programmable DC Power Supplies Models 9120A, 9121A, 9122A, 9123A & 9124。
requires 0.0.3 商品说明书
Package‘requiRements’February24,2023Title Helper Package to Install Packages for RVersion0.0.3Date2023-02-24Description Helper function to install packages for R using an external'requirements.txt'or a string containing diverse packages fromseveral resources like Github or CRAN.License GPL-3URL https:///joundso/requirementsBugReports https:///joundso/requirements/issuesDepends R(>=4.1.0)Imports remotesSuggests lintr,testthatEncoding UTF-8Language en-USRoxygenNote7.2.3NeedsCompilation noAuthor Jonathan M.Mang[aut,cre](<https:///0000-0003-0518-4710>), MIRACUM-Medical Informatics in Research and Care in UniversityMedicine[fnd],Universitätsklinikum Erlangen[cph]Maintainer Jonathan M.Mang<****************************>Repository CRANDate/Publication2023-02-2412:40:02UTCR topics documented:install (2)Index41install Install the packages provided to this functionDescriptionInstall the packages provided to this functionUsageinstall(packages=NULL,path_to_requirements=NULL,quiet=TRUE,upgrade="always")Argumentspackages(Optional,String,also as vector)The actual packages to install.path_to_requirements(Optional,String)The path(includingfilename and type ending)to a textfilecontaining all the packages to install.quiet If TRUE,suppress output.upgrade Should package dependencies be upgraded?One of"default","ask","always", or"never"."default"respects the value of the R_REMOTES_UPGRADE environmentvariable if set,and falls back to"ask"if unset."ask"prompts the user for whichout of date packages to upgrade.For non-interactive sessions"ask"is equivalentto"always".TRUE and FALSE are also accepted and correspond to"always"and"never"respectively.Value(Boolean)‘TRUE‘if all packages are successfully installed,‘FALSE‘otherwise.Examples##Not run:##Test it with a string:demo_string<-"DIZutilsdata.tablejoundso/mainzelliste-connectormiracum/misc-dizutils@development#this_one_will_be_ignored"requiRements::install(packages=demo_string)##Test it with a vector:demo_vec<-c("","DIZutils","data.table","joundso/mainzelliste-connector","miracum/misc-dizutils@development","#this_one_will_be_ignored")requiRements::install(packages=demo_vec)##Test it with a file:demo_path<-"./data-raw/requirements.txt" requiRements::install(path_to_requirements=demo_path) ##Test it with a string AND a file:requiRements::install(packages=demo_string,path_to_requirements=demo_path) ##Test it with a vector AND a file:requiRements::install(packages=demo_vec,path_to_requirements=demo_path) ##End(Not run)Indexinstall,24。
SIEMENS 6GK1503-3CA00 PROFIBUS OLM P12 产品说明书
Transmission rate Transfer rate / with PROFIBUS Transfer rate / with PROFIBUS PA
9.6 kbit/s ... 12 Mbit/s 45.45 kbit/s
Interfaces Number of electrical/optical connections / for network components or terminal equipment / maximum Number of electrical connections ● for network components or terminal equipment ● for measuring device ● for signaling contact ● for power supply ● for redundant voltage supply Type of electrical connection ● for network components or terminal equipment ● for measuring device ● for power supply ● for power supply and signaling contact Number of optical interfaces / for fiber optic cable
112 mm 74.5 mm 340 g
Yes Yes
Yes
FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4 EN 60079-0: 2006, EN60079-15: 2005, EN60079-28: 2007, II 3 (2) G Ex nA [opis] IIC T4 KEMA 09 ATEX 0173X UL 60950-1, CSA C22.2 Nr. 60950-1 UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4 EN 61000-6-4 (Class A) EN 61000-6-2 EN 61000-6-2, EN 61000-6-4 Yes Yes
CNAM - IIM MIM Catalog-2010
Master in Management(MIM)Master en Science de Gestion –Diplômes Nationaux LMDThe CNAM IIMMaster in Management Master in Management (MIM)(MIM)The Master in Management (MIM) (3)Program structure.................................................................................................................................3 Course descriptions (4)Core curriculum (Master 1)................................................................................................................................4 Specializations or Majors (Master 2).................................................................................................................5 Transversal Management Courses . (5)Major in Project Management and Business Engineering....................................................................6 Major in Sustainable Development and Global Quality Management...................................................8 Major in Organization Consulting and Change Management .............................................................10 Major in International Business and Alternative Management Methods .............................................12 Supporting Placement Courses.. (13)Faculty................................................................................................................................................14 Admissions.. (20)Application Deadlines & Calendar...................................................................................................................20 Student profiles...............................................................................................................................................20 Class organization ..........................................................................................................................................21 Financial Information ..........................................................................................................................21 Payment policies.............................................................................................................................................21 Refund policies...............................................................................................................................................21 Further Information.. (21)The International Institute of Management (IIM) (22)Our Programs and Degrees................................................................................................................22 Academic Partnerships.......................................................................................................................23 Business Partnerships........................................................................................................................23 International Conferences and Events:...............................................................................................23 IIM Teaching Team.............................................................................................................................24 IIM Student Life...................................................................................................................................24 General study facilities........................................................................................................................24 The IIM Management Team................................................................................................................25 The MIM Programmes Team.. (25)The Cnam (26)Foundation of the Cnam.....................................................................................................................26 History of the university ......................................................................................................................26 Today.. (26)This catalog presents the Master in Management Program, offered by the International Institute of Management of the Conservatoire National des Arts et Métiers, Cnam-IIM. More detailed information is available at am.frThe Master in Management (MIM)is designed for students who wish to pursue a career in business and management and increase their professional horizons, domain knowledge and leadership ability.The program provides a solid foundation in the range of management disciplines and is distinguished from other specialized Masters by this breadth.The official language of the CNAM-IIM MIM is English.This program enables participants to:1. Represent an organization’s activities as a system of processes that mobilize diverseresource streams throughout the enterprise, in a context of competition-co-operation, to satisfy stakeholder parties;2. Represent the management of this activity as an action which includes fourcomplementary elements: functional management, time management, organizational management, daily management;3. Master the principles and tools developed for managers of business units which result in aparticipative management based on a contract;4. Master the strategic principles and tools which guide the action of employees toward highperformanceProgram structureThe Master in Management treats this body of knowledge in a Core Curriculum that addresses the principles of management along with baseline courses in Organizational Theory, Management Accounting, Finance, Human Resource Management, Marketing and Management of the Firm; the foundations of more advanced topics.The Master in Management also offers a choice of four majors that focus learning effort on Project Management and Business Engineering, Sustainable Development and Global Quality Management, Organization Consulting and Change Management, and International Business and Alternative Management Methods.Group projects, a research report and internship are also important features of this curriculum. Transversal courses for all four majors provide students with indispensable up-to-date Management principles and tools in the real business environment. These courses include Project Management core, Business Law, Quality Management Principles and Management Information system.Supporting courses include Career Management and Coaching, Team Building and Business Simulation, Business French language. They help students to build a concrete view on the working environment, especially in the specific French and European business.The CNAM-IIM MIM is designed around the framework of two orientation weeks, a core curriculum, a major over two years. Courses are organized over two semesters per year and carry between 2 to 8 credits, depending on their importance and duration, with a full amount of over 60 ECTS credits per year. The first year includes the six core curriculum courses, an integrative group project and an academic report, with 550 contact hours. The second year is dedicated to majors, electives and internship, with around 450 contact hours and 900 hours of overall workload.34Course descriptionsCore curriculum (Master 1)CourseDescriptionSelected TopicsDuration /CreditsIIM M101 Management AccountingUnderstanding of financial information to support economic decisions, to motivate desired behavior, and to evaluate performance. Understanding and use of analytical methodologies for decision-making and control in profit-directed organizations. It also defines product costing, budgetary control systems, and performance evaluation systems for planning, coordinating, and monitoring the performance of a business. It shows the ways in which organizations can foster strategic successes by the optimal use of accounting information.• Purposes and actors of accounting information, standards, management accounting and financial accounting • Balance sheet, planning, accounting statements• Cost analysis principles • Functional cost analysis • Activity based cost• Activity based management 80 h 8 ECTSIIM M102 MarketingThis course explores the key concepts and processes of marketing, from the perspective of the general manager: Customer analysis (including buyer behavior and market segmentation) provides the foundation for marketing strategy (involving product policy, pricing, communication, and channels of distribution). Issues of marketing in a digital world are also considered.• Conceptual foundations • The Marketing Environment• Customer Buying Behavior, customer acquisition and retention • Value-based marketing• Developing and Managing Products • Pricing Concepts / Setting Prices • Marketing in a digital world • Marketing communications • Distribution channels80 H 8 ECTSIIM M103 Human Resources ManagementThis course examines the evolving human resources function within today's organizations. Topics include the changing environment of human resources management; managing human resources in the global community; human capital development; human resources processes and systems; strategic human resources management planning; role of human resources management in the global corporate performance; contemporary issues of human resources management• Evolving role of Human Resources management• Managing human resources in a global community• Human capital development• Individual vs. collective dimension • Human resources management processes ands systems (recruitment, training, development)• Legal aspects of human resources management• Conflict management50 H 6 ECTSIIM M104 Organization TheoryThis course examines modern concepts of effective management. Discussions focus on foundations, theories, and literature for designing effective organizational relationships. Integrate new concepts and models from organization. It will help to integrate new concepts and models of organization theory with changing events in the real world of organizations, diagnose, respond to emerging organizational needs and problems, and apply a contingency approach to the management of real organizations.• Organizations and organization theory. • Strategic management and organizational effectiveness.• Organization structure and design. • Organization design processes. • Managing dynamic processes.• Strategy and structure for the future.60 H 7 ECTSIIM M105 FinanceIntroduction to corporate finance and capital markets. Topics include project and company valuation, real options, measuring risk and return, stock pricing and the performance of trading strategies, corporate financing policy, the cost of capital, and risk management. Course provides a broad overview of both theory and practice.• Capital budgeting• Risk, return , opportunity cost of capital • Corporate financing, market efficiency • Decision rules for investment • Debt policy,• Financing, valuation options80 H 8 ECTSIIM M106 Management of the Firmprinciples and best practicesThis course helps understand the operating system of a firm as well as the different modalities of its management. It integrates the ways to diagnose this operating system and to define the evolution /change directions for a business enterprise.It will provide necessary skills to manage business activities and conduct teams from a managerial perspective.• Object and nature of management• Principles and tools of general policy: activities, processes, actors• Cycle of operational management • Strategic management• Managerial tasks and responsibilities in the social proximity80 H 8 ECTSIIM M180 Integrative group projectThe learning of the first year is applied in a team-based experience that allows students to learn by action in the real work world. Monitored by a professor, each group of students will conduct a project related to a live business and managerial issue. Each group must submit a 10 000 word report that embodies the outcomes of their project and defend them in an oral presentation.200H 15 ECTS5Specializations or Majors (Master 2)The CNAM-IIM MIM offers four majors that provide opportunities to deepen knowledge in a particular dimension of management and develop specific expertise: - Project Management and Business Engineering- Sustainable Development and Global Quality Management - Organization Consulting and Change Management- International Business and Alternative Management MethodsTransversal Management CoursesIn order to successfully be an entrepreneur or join an organization, Master in Management students need to develop their own skills, achieve the principles and tools of project, quality, intercommunication, etc. These skills, tools and principles will help optimizing the resources in this transversal management mode. Therefore, the CNAM-IIM has developed four transversal management modules that are indispensable for all Management students, whatever expertise they will follow. They include:CourseDescriptionSelected TopicsDuration / CreditsIIM M211 ProjectManagement CoreA project is an investment. Any investment has to be decided. Making a project investment decision has to be prepared adequately. One factor is assurance that project will be controlled adequately to its conclusion. This course provides future managers key practical knowledge to help them to plan projects and to control project execution. Objectives:1. To identify critical success factors in projects,2. To know how to develop a project plan,3. To know how to control project execution.To contribute to project plan development and execution• To plan and control execution ofsimple projects• Project identification - Project flowchartand organization• Broken line - Milestone Trend Chart • Performance metrics - Earned ValueManagement• Project control areas - Projectmanagement lag36 H 4 ECTSIIM M212 QualityManagement PrinciplesThis course intends to provide participants with the basics of a quality process, an understanding of principles, tools and main elements to apply it in their own business environment. Objectives:1. Comprehend the history of quality philosophy and concepts across the last decades : gurus and theories overview2. Learn root cause analysis for applications in technical and management problems3. Get familiar with quality process improvement tools and techniques• Quality management principles; • Quality based management; • Tools for improvement36 H 4 ECTSIIM M213 Management & Information SystemsThe course focuses on the identification of fundamental criteria to manage and pilot the firm and the elaboration of an appropriate information system to support them. It will address the business activity development with the use of ICT to support it Objectives:1. Provide an overview of the different kinds of information systems in an enterprise,2. Provide an understanding on the business opportunities created by new information and communication technologies and address the management issues,3. Give some basic methods for an efficient IS planning & development process and guidelines to optimize the returns on investment,4. Give confidence in addressing the management challenges of selecting and implementing computer based business systems.Study of the exploitation cycle and human resources management though the use of a corporate information system; Technical architecture of a corporate information system; Data structure, modeling, simulation; Internet, e-business, e-commerce; Corporate portal36 H 4 ECTSIIM M214 Business LawThe course introduces the most important European and international treaties and laws within the European, U.S. and international business environments The purpose of the course is to sensitize students to legal issues and to give them a perception of the language lawyers use. Students should learn to apply legal concepts discussed in class to fact patterns involving every day business problems. By the end of the course, students should be able to understand how lawyers think and what their preoccupations and concerns are so they, the students, will make better business decisions once they enter professional life.Topics covered include: contract formation, contractual terms and formalities, contractual arrangements for e-business,product liability, consumer protection, intellectual and industrial property law, labour law, privacy law, ADR (alternative dispute resolution policy) and law relating to international trade.18 H 2 ECTS6Major in Project Management and Business EngineeringThis Major in Project Management and Business Engineering combines theory and practice for the effective and successful management of a business unit. It provides methods and technologies to develop leadership and managerial skills and a better understanding of the main strategic components of the business management.Objectives- To develop a participative management and establish effective horizontal and vertical relationships.- To learn different managerial practices and be able to articulate them for an unit of activity alone and inside of a corporation-To explore a variety of tools and techniques to successfully manage business projectsCourse descriptionCourseDescriptionSelected TopicsDuration / CreditsIIM M221 Advanced Project ManagementAfter fundamental project management techniques (as presented and practiced during course nb1: “Project Management Core Course”), advanced techniques to tackle complexity in projects are reviewed in this course. Complexity comes in when: resources are shared with other projects or operations, project scope cannot be encompassed by one single person, at least, two management levels in the project. Objectives1.To know how to run a Project Management Office2. To know how to manage a project schedule consistent with resource allocations3. To know how to apply EVM (Earned Value Management) to projects• Project networking - Critical PathMethod and Negative float • S-curve - Resource leveling -Resource loading and Resource smoothing• Work Breakdown Structure andProject performance evaluation • WBS matrix and Construction ofPBS• Integration of project baselines36 H 4 ECTSIIM M226 Personal developmentThis module enables you, as future managers, to enhance your personal ability to communicate with people in work organization and thus, affords significant levers for finally improving client satisfaction, employee motivation and corporate good will. Objectives:1. To become aware of the methodological toolbox and practices of Business communication in order to develop managerial dimension and assume greater responsibilities in managing people & client relationship.2. To acquire the abilities for self-insurance, personal openness, independent insight, value sharing and welcoming diversity3. To work on oneself and develop a new approach of the environment avoiding the pitfall of self-centeredness4. To approach course content and applications in a useful, practical, managerial way.• Written communication in theprofessional life• Networking, relationships, … andprofessional life• Speech, oral communication• Social network analysis• Master & Set up delegation withcollaborators• Master meeting with a group36 H4 ECTSIIM M225 Organization and Team DynamicsTeamwork gets tasks done. However, what is a team? How does it function? What are the dynamics of a team? What does it take to be an effective team leader? This course teaches the characteristics of a well-functioning team and techniques for effective group decision-making. It looks at how to develop and adapt your own leadership style, how to set effective team goals, and how to implement strategies to secure the commitment of team members.• Principles of group dynamicsand development• Dimensions of team memberbehavior• Assessment of how effectively ateam functions36 H 4 ECTS7IIM M223 Business EngineeringThis is a course on the elements of entrepreneurship and the steps to take to get your idea into the world of business.This course will provide participants with the necessary basis and tools to analyze and conduct a business project with different perspectives: economic, financial, marketing, logistics and legal aspects. This course constitutes the basis for this specialization and different features are detailed in the complementary modules. Objectives: To enable students to develop analytical thought with respect to the market and the practicability of their ideas. • Business analysis & feasibility:economic environment,customer, market prospective • Entrepreneurship• Financial analysis of a businessproject• International exchanges,institutions and strategies • Risk management60 H 6 ECTSIIM M224 Feasibility study and Business PlanDue to complex business environment and intensive competition, entrepreneurs and managers must follow an in depth preparatory process before making business decision. It is essential that entrepreneurs and managers avoid mistakes leading to definitive failures. This includes good understanding of elements and forces driving the business feasibility and process to build and evaluate a successful business plan. Objectives1. Purposes and audiences for business plans2. Framework for a feasibility study3. Structure and content of a business plan4. Guide students in preparing business plans5. Help students in presenting business plans6. Train students in critical evaluation of business plans• Fundamentals, essentialelements and characteristics of a business plan modelling • Feasibility study• Preliminaries for financials,Income statement forecasting • Funding the business • Steps to develop projectbaseline plan • Scenarios • Case studies36 H 4 ECTSIIM M228 B to B MarketingToday with the turbulent markets, increased competition, distribution channels in flux, price pressures, etc … it is critical to gain knowledge, tools and techniques to use of new technologies for business marketing and develop skills for C and B to B. This course will bring leading-edge thinking and practice for developing skills for business marketers. Objectives:1. To understand what is the B2B marketing and its component2. To gain knowledge, tools, and techniques for business marketing and to develop skills especially for B to B business3. To know how to activate concretely every component to reach its B2B objectives• Selling skills in customer-drivenb-to-b markets• Business markets salesmanagement• Value-based selling incompetitive markets• Phone sales in business markets • High-level strategic selling • Key account and customerrelationship management • Trust and security 36 H 4 ECTSIIM M229 Contract ManagementAny project is a contract (contracting authority is product owner, contractor is project owner. This course is designed to provide the practitioner in the contract management and procurement profession with the sum knowledge required for doing her/his job. It is based on UE and US regulations and best practices.Objectives: The course will help participants develop negotiation skills as well as their ability to understand legal and specific components of a contract to contribute to a final deliverable. • Negotiation skills • Contract management • International contractmanagement• Acquisition strategy• Contract Pre-Post & Award • Unique Commercial &Government contracting 36 H 4 ECTSIIM M227 Business EthicsThis module enables you, as future managers, to enhance your personal ability to decide in work organization and thus, affords significant levers for finally improving client satisfaction, employee motivation and corporate good will. Objectives:1. This course will survey systems and status, which affect the corporate management. It will evaluate ethical fundamentals and principles tied up to the internal and external operating of a firm and address these issues in an individual and organizational perspective.2. It will discuss concept of societal responsibility and provide a critical approach to these concepts applied to management• Keys to manage projects • Product management forprojects• Project plan development• Project management simulation • Project scheduling techniques • Time & cost integrationtechniques• Project review techniques18 H 2 ECTSInternshipStudents will apply the learning of their two years study in a real world situation. An internship will complete the Master curriculum and offer an “action learning ” opportunity.360 H 15 ECTS8Major in Sustainable Development and Global Quality ManagementThe Major in Global Quality Management and Sustainable Development considers the managerial entrepreneurship in the perspective of a business «as unusual»; it combines organizational excellence, through the application of quality principles and best practices, together with a far greater emphasis on business sustainability assessments.Sustainable development is one of the most vibrant current topics in business; it is undoubtedly becoming the trend of business operation and development. Business is part of the sustainable development solution, while sustainable development is an effective long-term business growth strategy. But good governance is needed to make business a part of the solution: transparency and accountability are further challenges for business, especially in today’s information-driven, globalised world. This major reviews foremost methods and tools of these fields. Objectives- To integrate transversal approach of quality in any corporate project - To develop an understanding of the environmental issues and risks - To become a leading business advocate on sustainable development-To comprehend the business contribution to sustainable development solutions and practices- To understand and apply Sustainable Development governance and social responsibility principles Course descriptionCourseDescriptionSelected TopicsDuration /CreditsIM M231 Advanced Quality ManagementThis course intends to provide participants with the basics of a quality process, an understanding of principles, tools and main elements to apply it in their own business environment. The whole proximity business environment is envisioned in a quality perspective. Objectives: 1. Comprehend the evolution of all quality principles and methodologies: from inspection procedures to TQM and Six Sigma 2. Understand the COQ (Cost of Quality) principle3. Identify Quality measurement and Performance key issues4. Be introduced to the concept of Integrated Management Systems Students are expected to be familiar with the essential principles of Quality Management and how to make it work for business, projects and products. They might have to deepen their general knowledge on management and more precisely on quality management.• Quality management principles • Quality based management • Policy and strategy • Quality systems• Tools for improvement • Participative management •Mastery of products/ processes /flow• Client satisfaction and trade policy36 H 4 ECTSIIM M232 Quality NormsThis course describes how organizations can implement a system of quality management, using the ISO 9001 standard as a basis. It reviews the standard’s different requirements, processes and techniques for quality management and the benefits for the organization and its customers. It describes quality analysis techniques for products and services and the audit and certification processes for organizations. •Quality Management System • ISO 9000, ISO 9001 standards • Quality audit assesses• Process improvement, with other quality improvement models. • Service management (ISO20000), information security (ISO27001) & business continuity (ISO17999) 24 H2 ECTSIIM M233 Environment Management & NormsThis course will deal with the environmental policies: definition, principles, corporate responsibilities, regulations and processes in order to be aware of the existing regulation and conduct a process of certification. Objectives:1. to describe all the requirements of ISO 14001 standard2. to explain methods and tools for building an EMS3. to present others environmental 14000 standards4. show how much important is environmental management for all organizations and for sustainable development •Principles of environmental policy • Industrial environmental mgt interlocutors, with public admin • Analysis of environmental analysis and corporate action planning in the product life cycle• Environmental analysis: regulation, laws, practices and processes • Environmental audit •ISO 14001 standard and certification process72 H 8 ECTS。
博优商业管理系统迷你版使用说明书
博优商业管理系统迷你版使用说明书精选文档 TTMS system office room 【TTMS16H-TTMS2A-TTMS8Q8-深圳博优思创科技博优商业管理系统说明书目录后台第一次使用 .................................................................................................................... 同码系列商品 ........................................................................................................................ 货商结算单 ............................................................................................................................8、列操作..............................................................................................................................第一章软件安装运行环境要求系统硬件准备在安装“博优商业管理系统迷你版”软件产品之前，您必须按照第一章的“运行环境要求”准备好所有的硬件。
系统软件准备安装“博优商业管理系统迷你版”软件产品之前，您必须按照第一章的“运行环境要求”准备好并安装好需要的操作系统。
软件产品准备在准备好系统硬件和系统软件后，确认您所购买的“博优商业管理系统迷你版”软件产品是否完整（包括产品光盘、加密狗等），如您对购买的“博优商业管理系统迷你版”软件产品有任何怀疑和疑问，请联系我公司或代理商。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
患者治疗过程中的关键时间点
患者有意愿使 用类克
50% 患者第一次注射
50% 患者脱落
20% 网络内容原因 20% 病友交流原因 10% 其他医生原因
60-70% 患者第二--四次注射
30-40% 患者脱落
90%
患接受捐赠的 两次注射
调研结论
• 患者得到医生及时咨询后，如果能够及时解决患者的疑虑 ，可以有效延长患者的使用次数
– 可以提高13%有意向用类克的患者第一次注射的成功率 – 可以提高16%第四次注射的成功率，同时可以提高进入下一轮赠
药计划患者的比例 – 可以提高18%患者进入下一个疗程的治疗
• 在所有咨询内容方面，以安全性方面的内容咨询比例最高 ，疗效方面其次。由此得到结论及时解决患者的安全性方 面的顾虑对于患者延长使用周期很重要。
1 患者脱落
2
患者持续注 射七次以上
7 患者脱落
一共接受咨询46次， 其中问疗效的12次， 不良反应19次，价格 8次，依从性7次
其余医生的具体到咨询前后两组观察的总患者数分别是66人
观察指标
成功进行第一次注射的百分率
坚持注射完第四次的百分率
坚持注射完捐赠两次的百分率
内容
1 2 3 4 5
项目意义 目标设定 项目组成员 研究方法和思路 项目结论
“数一不二”项目团队
牟菁
董艳
潘浩天
孔晓燕
胥海滨
项目导师：张伟、李一敏 项目得到了如下人员的支持：刘焰， Wynstan, 娄伟……
内容
1 2 3 4 5
项目意义 目标设定 项目组成员 研究方法和思路 项目结论
找到关键业务问题
“frustrated”
“a life long burden”
Patient Unmet Need
“helpless”
“Desperate”
“Disabled”
“irritable”
治疗承诺依赖于患者对于价格和价值的评估
患者感受到的价值
Emotional Benefit
Service Benefit Product Benefit
Information search
Alternative Evaluation
Purchase decision
1
1st intention of choice/switch
Doctor recommendation
Price calculation
3
Doctor introduced sponsorship program
10%
患者脱落
10
%
10% 疗效好原因 10% 不良反应原因 10% 其他病人影响原因
5% 突发事件原因
突发事件退出
20%
患者持续7 次以上注射
80% 患者脱落
60% 费用原因
20 %
疗效太好原因
数据来源：北京，广州，成都， 沈阳四地销售反馈
患者可以随时得到专业医生咨询前 后的患者脱落情况分析调研结果
坚持进入下一个疗程的百分率
•咨询内容次数比例情况
咨询内容 安全性 疗效 价格 依从性
咨询前 52%(34/66) 62%(21/34) 86%(18/21）
6%(1/18)
咨询后 65%(43/66) 88%(38/43) 89%（34/38) 24%(8/34)
所占百分比率 45% 27% 17% 11%
总体花费
总体花费
>
12
研究思路
影响患者 选择的因
素
查看各种数 据和组织调 研,发现患者
insight
根据市场和 疾病发展， 我们有什么 创新的机会？
进行Pilot研 究，得出最
终结论
患者对于治疗的选择取决于医生的推荐，互联网的参考 ，朋友和其他病友的推荐进行验证
Problem recognition
0% 医生咨询 病友交流
网络
报纸杂志
看书
30%
20%
10%
0% 医生咨询 病友交流
网络
10% 0%
看书 报纸杂志
在治疗过程中，你会通过什么途径 了解相关治疗信息？
在治疗过程中，你会首选什么途径 了解相关治疗信息（排名前两 位）？
创新的机会
• 患者和医生沟通过程中，患者有没有未被 满足的服务需求呢?
“Disabled”
“irritable”
摘自2012年3月 生物制剂患者研讨会
内容
1 2 3 4 5
项目意义 目标设定 项目组成员 研究方法和思路 项目结论
项目目标
• 深度洞察患者治疗过程，探索创新的患者服务模式 ，为患者提供价值，从而推进杨森在免疫学领域的 领导地位
备注：由于其他两个产品会在未来二到年才能够在中国上市，我们更加聚焦于Remicade
A医生提供咨询前 20名有意向的患者
8 患者第一次注射
12 患者脱落
5 患者第二--四次注射
3 患者脱落
4
患者接受捐赠 的两次注射
1 患者脱落
0
患者持续注 射七次以上
4 患者脱落
A医生提供咨询后 20名有意向的患者
12 患者第一次注射
8 患者脱落
10 患者第二--四次注射
3 患者脱落
9
患接受捐赠的 两次注射
4
Final decision
Treatment satisfaction
患者调研
100% 100% 100% 100%
90%
“治疗过程中不 能够及时得到医100% 100% 100%
生的帮助” 90%
80%
80%
70%
70%
70%
60%
60%
50%
50%
50%
40%
40%
30%
20%
20%
10%
调研的具体方法
• 事先跟医生达成协议，让医生给有意向用类克 患 者或者在用类克的患者提供24时咨询服务，把每 次咨询的大致内容（疗效、安全性、价格、依从 性）记下来
• 分别就患者能够得到咨询服务前、后类克患者的 脱落情况进行分析，推断咨询的效果
• 对患者咨询医生的次数和内容进行分析，了解患 者关心的话题
洞察患者，创新服务 推进杨森在免疫学领域的领导地位
Mini-EMBA
内容
1 2 3 4 5
项目意义 目标设定 项目组成员 研究方法和思路 项目结论
免疫是全球和杨森的策略发展领域
你想象过吗？
“frustrated”
“a life long burden”
“helpless”
“Desperate”
Post-purchase behavior
5
Continue purchase
Cross check & 2 Validation
Internet
Other patients/friends
Doctor introduced treatment duration
Price consideration