采煤机检修工检修流程表

采煤机检修工检修流程表
英文回答：
1. Safety Inspection: Inspect for any hazards or potential risks before starting work.
2. Equipment Inspection: Check the machine thoroughly for any leaks, cracks, or other signs of damage.
3. Electrical Inspection: Verify the electrical system's integrity, including wires, connections, and switches.
4. Hydraulic Inspection: Inspect the hydraulic system for leaks, pressure levels, and hydraulic fluid condition.
5. Mechanical Inspection: Check the gears, bearings, and other mechanical components for wear, damage, or misalignment.
6. Lubrication: Perform regular lubrication of all moving parts according to the manufacturer's specifications.
7. Cleaning and Inspection: Clean and inspect the machine thoroughly, paying attention to any dirt, debris,
or contaminants.
8. Reassembly: Assemble the machine carefully, ensuring all components are properly aligned and secured.
9. Testing and Adjustment: Test the machine's operation and make any necessary adjustments to ensure optimal performance.
中文回答：
采煤机检修流程表。

1. 安全检查，开工前检查是否有任何危险或潜在风险。

2. 设备检查，对机器进行全面检查，是否存在任何泄漏、裂缝
或其他损坏迹象。

3. 电气检查，验证电气系统的完整性，包括电线、连接和开关。

4. 液压检查，检查液压系统是否存在泄漏、压力水平和液压油
状况。

5. 机械检查，检查齿轮、轴承和其他机械组件是否存在磨损、
损坏或未对准。

6. 润滑，根据制造商的规格对所有运动部件进行定期润滑。

7. 清洁和检查，彻底清洁和检查机器，注意任何污垢、碎屑或
污染物。

8. 重新组装，小心组装机器，确保所有组件都正确对齐并固定
牢固。

9. 测试和调整，测试机器的运行情况，并进行必要的调整，以
确保最佳性能。