ZMM27中文资料 - 360文档中心

ZMM5V1中文资料(Shenzhen Jin)中文数据手册「EasyDatasheet - 矽搜」

60
70
80
90
100 V
Vz
正向特性
mA 10
10 i
10
1
10
10
10
10 10
0
ZMM...
Tj=100 C Tj=25 C
0.2
0.4
0.6
0.8
1V
V
容许功耗随环境温度 Valid provided that electrodes are kept at ambient temperature.
1
ZMM 2V2
2.2
5
2.08...2.33
1
ZMM 2V4
2.4
5
2.28...2.56
1
ZMM 2V7
2.7
5
2.5...2.9
1
ZMM 3V0
3.0
5
2.8...3.2
1
ZMM 3V3
3.3
5
3.1...3.5
1
ZMM 3V6
3.6
5
3.4...3.8
1
ZMM 3V9
3.9
5
3.7...4.1
Capacitance versus Zener voltage
Dynamic resistance versus Zener current
75
2.5
70...79
0.5
ZMM 82
82
2.5
77...87
0.25
ZMM 91
91
1
85...96
0.1
ZMM 100
100
1
94...106
0.1
ZMM 110

ZMM系列稳压管

FEATURES♦Silicon Planar Zener Diodes♦In Mini-MELF case especially for automatic insertion.♦The Zener voltages are graded according to the international E 24 standard. Smaller voltagetolerances and other Zener voltages are available upon request.♦These diodes are also available in DO-35 case with the type designation ZPD1 … ZPD51.MECHANICAL DATACase:Mini-MELF Glass Case (SOD-80)Weight:approx. 0.05 gMAXIMUM RATINGSRatings at 25°C ambient temperature unless otherwise specified.SYMBOL VALUE UNITZener Current (see Table “Characteristics”)Power Dissipation at T amb = 25°C P tot 500(1)mW Junction Temperature T j 175°C Storage Temperature RangeT S– 55 to +175°CZENER DIODES.142 (3.6).019 (0.48)∅Cathode Mark.063 (1.6).134 (3.4).055 (1.4).011 (0.28)Dimensions are in inches and (millimeters)ZMM1(3)0.7 ... 0.8 6.5 (< 8)< 50– 26 ... – 23–280340ZMM2.7 2.5 ... 2.975 (< 83)< 500– 9 ... – 4–135160ZMM3 2.8 ... 3.280 (< 95)< 500– 9 ... – 3–117140ZMM3.3 3.1 ... 3.580 (< 95)< 500– 8 ... – 3–109130ZMM3.6 3.4 ... 3.880 (< 95)< 500– 8 ... – 3–101120ZMM3.9 3.7 ... 4.180 (< 95)< 500– 7 ... – 3–92110ZMM4.3 4.0 ... 4.680 (< 95)< 500– 6 ... – 1–85100ZMM4.7 4.4 ... 5.070 (< 78)< 500– 5 ... +2–7690ZMM5.1 4.8 ... 5.430 (< 60)< 480– 3 ... +4> 0.86780ZMM5.6 5.2 ... 6.010 (< 40)< 400– 2 ... +6> 15970ZMM6.2 5.8 ... 6.6 4.8 (< 10)< 200– 1 ... +7> 25464ZMM6.8 6.4 ... 7.2 4.5 (< 8)< 150+2 ... +7> 34958ZMM7.57.0 ... 7.9 4 (< 7)< 50+3 ... +7> 54453ZMM8.27.7 ... 8.7 4.5 (< 7)< 50+4 ... +7> 64047ZMM9.18.5 ... 9.6 4.8 (< 10)< 50+5 ... +8> 73643ZMM109.4 ... 10.6 5.2 (< 15)< 70+5 ... +8> 7.53340ZMM1110.4 ... 11.6 6 (< 20)< 70+5 ... +9> 8.53036ZMM1211.4 ... 12.77 (< 20)< 90+6 ... +9> 92832ZMM1312.4 ... 14.19 (< 25)< 110+7 ... +9> 102529ZMM1513.8 ... 15.611 (< 30)< 110+7 ... +9> 112327ZMM1615.3 ... 17.113 (< 40)< 170+8 ... +9.5> 122024ZMM1816.8 ... 19.118 (< 50)< 170+8 ... +9.5> 141821ZMM2018.8 ... 21.220 (< 50)< 220+8 ... +10> 151720ZMM2220.8 ... 23.325 (< 55)< 220+8 ... +10> 171618ZMM2422.8 ... 25.628 (< 80)< 220+8 ... +10> 181316ZMM2725.1 ... 28.930 (< 80)< 250+8 ... +10> 201214ZMM3028 ... 3235 (< 80)< 250+8 ... +10> 22.51013ZMM3331 ... 3540 (< 80)< 250+8 ... +10> 25912ZMM3634 ... 3840 (< 90)< 250+8 ... +10> 27911ZMM3937 ... 4150 (< 90)< 300+10 ... +12> 29810ZMM4340 ... 4660 (< 100)< 700+10 ... +12> 3279.2ZMM4744 ... 5070 (< 100)< 750+10 ... +12> 3568.5ZMM5148 (54)70 (< 100)< 750+10 ... +12> 3867.8ZMM5652.0 … 60.0(4)<135(4)<1000(5)typ. +10(4)–––ZMM6258.0 … 66.0(4)<150(4)<1000(5)typ. +10(4)–––ZMM6864.0 … 72.0(4)<200(4)<1000(5)typ. +10(4)–––ZMM7570.0 … 79.0(4)<250(4)<1500(5)typ. +10(4)–––NOTES:(1) Tested with pulses t p = 5 ms(2) Valid provided that electrodes are kept at ambient temperature(3) The ZMM1 is a silicon diode operated in forward direction. Hence, the index of all parameters should be “F” instead of “Z”Connect the cathode electrode to the negative pole (4) at I Z = 2.5 mA (5) at I Z = 0.5 mAELECTRICAL CHARACTERISTICSRatings at 25°C ambient temperature unless otherwise specified.TypeZener Voltage (1)at I Z = 5 mAV Z Vat I Z = 5 mA f = 1 kHz r zj Ωat I Z = 1 mA f = 1 kHz r zj ΩTemp. Coeff.of Zener Voltageat I Z = 5 mA αVZ 10–4/K Reverse Voltage atI R = 100 nAV R V atT amb = 45°C I Z = mA Admissable Zener current (2)atT amb = 25°C I Z = mA Dynamic ResistanceCopyright © Each Manufacturing Company.All Datasheets cannot be modified without permission.This datasheet has been download from :100% Free DataSheet Search Site.Free Download.No Register.Fast Search System.。

ZMM4V7中文资料

元器件交易网
ZMM2V4 - ZMM75
500mW SURFACE MOUNT ZENER DIODE Features
· · · · Planar Die Construction Sealed Glass Case Ideally Suited for Automated Insertion 2.4V - 75V Nominal Zener Voltages
Notes:
1. Tested with pulses tp = 20 ms. 2. Valid provided that electrodes are kept at ambient temperature.
NOT FOR NEW DESIGN, USE BZT52C2V4 - BZT52C51
DS18005 Rev. H-3
2 of 3
ZMM2V4-ZMM75
元器件交易网
100
50
Ptot = 500mW TA = 25°C
Ptot = 500mw TA = 25°C
IZ, ZENER CURRENT (mA)
80
40
60
IZ, ZENER CURRENT (mA)
30 25 20 VZ, ZENER VOLTAGE (V) Fig. 8, Zener Current vs Zener Voltage
Tj = 25°C
35
500
Pd, POWER DISSIPATION (mW)
400 300 200 100 0
100
IZ = 1mA
5mA
10
10mA
0
40
80
VR = 2V Tj = 25°C
5

TLC27M7中文资料

元器件交易网IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinueany product or service without notice, and advise customers to obtain the latest version of relevant informationto verify, before placing orders, that information being relied on is current and complete. All products are soldsubject to the terms and conditions of sale supplied at the time of order acknowledgement, including thosepertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extentTI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarilyperformed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OFDEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICALAPPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, ORWARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHERCRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TOBE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operatingsafeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or representthat any license, either express or implied, is granted under any patent right, copyright, mask work right, or otherintellectual property right of TI covering or relating to any combination, machine, or process in which suchsemiconductor products or services might be or are used. TI’s publication of information regarding any thirdparty’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1999, Texas Instruments Incorporated。

SAP通用事务码（附FI解析）

SAP通⽤事务码（附FI解析）FI事务码解析6⼀、FI清帐事务码61.总账清帐~F-03 62.客户清帐~F-32 63.供应商清帐~F-44 64.收客户款记账清帐~F-28=F-06 65.付供应商款记账并清帐~F-53=F-07 66.万能过账清帐~F-04=F-30 67.万能⾃动清帐~F.13 7⼆、FI基础数据事务码71.总账科⽬维护~FS00 72.创建客户~FD01=XD01 73.创建供应商~FK01=XK01 74.创建固定资产~AS01 7三、FI业务操作事务码71.总账科⽬记账~F-02 7四、FI报表查询事务码81.客户余额查询-FD10N 8 2供应商余额查询-FK10N 83.总账余额查询-FS10N 84.客户⾏项⽬查询-FBL5N 85.供应商⾏项⽬查询-FBL1N 86.总账⾏项⽬查询-FBL3N 87.检查交货单是否⽣成会计凭证-VFX3 8 8查询移动类型明细-MB51 8 9查询库存明细-MB5B 8五、固定资产事务码81.创建资产主数据-AS01 82.主数据修改调拨-AS02 83.主数据冻结/删除-AS05/AS06 84.查看固定资产详细信息-AW01N 8 5固定资产报废-ABAVN 86固定资产公司间调拨-ABT1N 87.固定资产折旧运⾏-AFAB 88.资产明细账和总账的校对-ABST2 8 9资产会计年度更改-AJRW 8 10.资产年末余额结转-AJAB 9 11在建⼯程分配设定-AIAB9 12.在建结算（转固定）-AIBU 9CO事务码解析9⼀、主数据91.创建初级要素-KA01 92.创建次级要素-KA06 93.维护成本中⼼-KS01、2、3、4 94.维护统计指标-KK01、2、3、4 95.维护成本中⼼组-KSH1、2、3、4 9 6作业类型维护-KL01、2、3 9 7内部订单-KO01、2、3 9 8分配维护-KSV1、2、3 9 9分摊维护-KSU1、2、3 9 10.统计指标参数维护-KB31N 9⼆、业务操作91.执⾏分配-KSV5 92.执⾏分摊-KSU5 93.维护作业计划价格-KP26 94.单个估算成品物料-CK11N 105.批量估算成品物料-CK40N 106.成本估算价格标记发布-CK40 107.实际费⽤归集成作业类型-KSS2 108.实际作业价格计算-KSS I109.⼯单重估-CON2 1010.在制品计算-KAAO 1011.⽣产订单结算-CO88 1012.⽣产订单成本分析-KOC4 1013.成本中⼼重过账-KB11N（费⽤凭证成本中⼼冲销）10三、CO报表101.成本中⼼报表-S-ALR-87013611 10 2内部订单报表-S-ALR-87012993 103.批量成本估算报表-S-ALR-87099930 104.⽣产订单成本分析报表-CO03转分析10 MM事务码解析10⼀、主数据101.主数据维护-MM01、2、6 102.创建信息记录-ME11、12、15 10⼆、MM业务操作111.询价单-ME41、42、45、47 112.创建采购申请-ME51N 113.采购订单维护-ME21N、22、29 114.购订单收货-MIGO 115.发货-MB1A 116.转移记账-MB1B 117.其他收货-MB1C 118.MB02-更改物料凭证119.取消发票凭证-MR8M 1110.发票总览-MIR6 1111.维护盘点凭证-MI01、02 1112.输⼊盘点结果-MI04 1113.盘点差异过账-MI07 11三、MM报表111.物料清单-MM60 112.显⽰信息记录-ME13 113.审核信息记录-ZTM004 114.显⽰供应商-XK03 115.库存总览-MMBE 116.供应商清单显⽰-MKVZ 127.采购申请清单显⽰-ME5A 128.按供应商显⽰采购订单-ME2L 129.按物料显⽰采购订单-ME2M 1210.物料凭证清单显⽰-MB51 1211.物料的会计凭证-MR51 1212.显⽰仓库现有库存-MB52 1213.记账⽇期库存-MB5B 1214.查询在途库存-MB5T 12^`MM开发事务代码12PP 12⼯艺路线导⼊-ZPP001 12 BOM批量导⼊-ZPP002 12订货会需求查看-ZPP003 12营销订单预排协同-ZPP005 12营销订单拆成⽣产指令单-ZPP006 12⼯序外协批量下达-ZPP007 12 MRP监视报表-ZPP008 12鞋贴打印与补打-ZPP010 12唯⼀码⽣成-ZPP011 12⼿⼯报⼯-ZPP012 13扫描⼊库-ZPP013 13⼯艺路线批量查询-ZPP016 13⽣产指令单打印-ZPP018 13 MM 13鞋类成品库存报表查询-ZMM001 13⼯⼚间调拨查询报表-ZMM002 13费⽤类订单查询报表-ZMM007 13采购信息记录查询报表-ZMM018 13 AFS总仓收货内向交货单下发WMS-ZMM010 13 AFS总仓退货⾄供应商内向交货单下发WMS-ZMM012 13按货号创建⼤货材料采购订单-ZMM026 13⽤料明细审批-ZMM026A 13制定采购收获计划-ZMM027 13领料单创建-ZMM027A13领料单查看编辑-ZMM027B13领料单发货-ZMM027C 13领料单冲销-ZMM027D 13异常事件分类配置表维护-ZMM028 13成品⽣产发货-ZMM038A 13成品总仓收货-ZMM038B14成品总仓销售收货-ZMM038C 14成品总仓销售退货收货-ZMM038D 14 AFS采购订单查询报表-ZMM006 14订货会需求转成品采购订单-ZMM040 14鞋类成品拆装箱-ZMM041 14维护成品物流运输异常事件-ZMM042、43、44 14成品⼊库凭证打印-ZMM045 14材料⼊库凭证打印-ZMM046 14⼯序外协物料⼊库凭证打印-ZMM047 14材料公司间调拨-ZMM052 14采购信息记录导⼊-ZMM057 14⼯序外协采购订单打印-ZMM058 14盘点批量创建处理-ZMM059 14⾮箱码成品扫描⼊库-Z MM059A 14SD事务码解析14⼀、主数据141.创建销售客户-XD01 14 2客户清单- 14⼆、SD业务操作151.创建销售订单-VA01 152.创建合同-VA41 153.销售开票-VF01 154.创建交货-VL01N 15三、SD报表151.查看销售订单-VA03 152.销售订单清单-VA05 15 3销售合同清单-VA45 15 4查看合同-VA43 15 5查看交货单-VL03N 15PP事务码解析15⼀、主数据15⼆、PP业务操作161.创建⽣产订单-CO01 162.⽣产订单⼯序报⼯-CO11N 163.⽣产订单多⼯序报⼯-CO12 16 4取消⽣产订单报⼯-CO13 16 5⼯⼚运⾏MRP-MD01 16 6物料MRP运⾏-MD02 167.⽣产订单收货-MB31 168.⽣产订单排产-ZC06 169.批量⽣产订单下达-CO05/CO05N 16三、PP报表161.BOM显⽰-CS03 162.BOM各种显⽰-CS11、12、13 163.BOM批量查询-XXX待开发164.⼯作中⼼显⽰-CR03 165.⼯作中⼼清单查询-CR05 166.⼯作中⼼的成本中⼼查询-CR06 167.⼯艺路线显⽰-CA03 168.⽣产订单报⼯显⽰-CO14 169.按物料查询⽣产订单-CO21 16 FI事务码解析1.总账清帐~F-03这个是对总账的⼀个清帐，结果显⽰查看FBL3N，红灯变绿灯，表⽰清帐成功。

27MG使用手册

预期用途 .................................................................................................................................. 5 指导手册 .................................................................................................................................. 5 仪器兼容性 .............................................................................................................................. 5 维修与改装 .............................................................................................................................. 6 安全符号 .................................................................................................................................. 6 安全信号词 .............................................................................................................................. 7 注释信号词 .............................................................................................................................. 7 警告 ........................................................................................................................................ 8 有关电池的预防措施 .............................................................................................................. 8 设备处理 .................................................................................................................................. 9 CE （欧盟） ............................................................................................................................. 9 WEEE 指令 .............................................................................................................................. 9 中国 RoHS ............................................................................................................................... 9 韩国通信委员会（KCC）.................................................................................................... 10 符合电磁兼容（EMC）指令 .............................................................................................. 10 FCC （美国）合规 ................................................................................................................ 10 ICES-001 （加拿大）合规 ................................................................................................... 10 担保信息 ................................................................................................................................ 11 技术支持 ................................................................................................................................ 11

ZMM55-C5V1中文资料(PANJIT)中文数据手册「EasyDatasheet - 矽搜」

M a x. V 2 .5 6 2 .9 3 .2 3 .5 3 .8 4 .1 4 .6 5 5 .4 6 6 .6 7 .2 7 .9 8 .7 9 .6 1 0 .6 11 . 6 1 2 .7 1 4 .1 1 5 .6 1 7 .1 1 9 .1 2 1 .2 2 3 .3 2 5 .6 2 8 .9 32 35 38 41 46 50 54 60 66 72 79 87 96 106
包装类型
磁带和弹药箱
(T/B)
磁带和卷轴
(T/R)
散装包装
(B/P)
管包装
(T/P)
磁带和卷轴（右导向）
(TRR)
磁带和卷轴（左导向）
(TRL)
成型
包装代码 XX
1 代码
包装尺寸代码
A
N/A
R
7"
B
13"
T
26mm
S
52mm
L
PANASERTT/ B阴极UP
(PBCU)
F
PANASERTT/ B阴极DOWN (PBCD)
T / R - 2.5K每7"塑料卷轴 T / R - 10K每13"塑料卷轴
500毫瓦
MINI-MELF/LL-34
Unit : inch (mm)
最大额定值 ,电器性能
Power Dissipation at Tamb = 25
Parameter C
Symbol
P
Value
Units
500
mW
Junction Temperature
0 .1
Ma x R e ve r s e L e a k a g e C ur r e nt

ZMM3中文资料

FEATURES♦Silicon Planar Zener Diodes♦In Mini-MELF case especially for automatic insertion.♦The Zener voltages are graded according to the international E 24 standard. Smaller voltagetolerances and other Zener voltages are available upon request.♦These diodes are also available in DO-35 case with the type designation ZPD1 … ZPD51.MECHANICAL DATACase:Mini-MELF Glass Case (SOD-80)Weight:approx. 0.05 gMAXIMUM RATINGSRatings at 25°C ambient temperature unless otherwise specified.SYMBOL VALUE UNITZener Current (see Table “Characteristics”)Power Dissipation at T amb = 25°C P tot 500(1)mW Junction Temperature T j 175°C Storage Temperature RangeT S– 55 to +175°CZENER DIODES.142 (3.6).019 (0.48)∅Cathode Mark.063 (1.6).134 (3.4).055 (1.4).011 (0.28)Dimensions are in inches and (millimeters)ZMM1(3)0.7 ... 0.8 6.5 (< 8)< 50– 26 ... – 23–280340ZMM2.7 2.5 ... 2.975 (< 83)< 500– 9 ... – 4–135160ZMM3 2.8 ... 3.280 (< 95)< 500– 9 ... – 3–117140ZMM3.3 3.1 ... 3.580 (< 95)< 500– 8 ... – 3–109130ZMM3.6 3.4 ... 3.880 (< 95)< 500– 8 ... – 3–101120ZMM3.9 3.7 ... 4.180 (< 95)< 500– 7 ... – 3–92110ZMM4.3 4.0 ... 4.680 (< 95)< 500– 6 ... – 1–85100ZMM4.7 4.4 ... 5.070 (< 78)< 500– 5 ... +2–7690ZMM5.1 4.8 ... 5.430 (< 60)< 480– 3 ... +4> 0.86780ZMM5.6 5.2 ... 6.010 (< 40)< 400– 2 ... +6> 15970ZMM6.2 5.8 ... 6.6 4.8 (< 10)< 200– 1 ... +7> 25464ZMM6.8 6.4 ... 7.2 4.5 (< 8)< 150+2 ... +7> 34958ZMM7.57.0 ... 7.9 4 (< 7)< 50+3 ... +7> 54453ZMM8.27.7 ... 8.7 4.5 (< 7)< 50+4 ... +7> 64047ZMM9.18.5 ... 9.6 4.8 (< 10)< 50+5 ... +8> 73643ZMM109.4 ... 10.6 5.2 (< 15)< 70+5 ... +8> 7.53340ZMM1110.4 ... 11.6 6 (< 20)< 70+5 ... +9> 8.53036ZMM1211.4 ... 12.77 (< 20)< 90+6 ... +9> 92832ZMM1312.4 ... 14.19 (< 25)< 110+7 ... +9> 102529ZMM1513.8 ... 15.611 (< 30)< 110+7 ... +9> 112327ZMM1615.3 ... 17.113 (< 40)< 170+8 ... +9.5> 122024ZMM1816.8 ... 19.118 (< 50)< 170+8 ... +9.5> 141821ZMM2018.8 ... 21.220 (< 50)< 220+8 ... +10> 151720ZMM2220.8 ... 23.325 (< 55)< 220+8 ... +10> 171618ZMM2422.8 ... 25.628 (< 80)< 220+8 ... +10> 181316ZMM2725.1 ... 28.930 (< 80)< 250+8 ... +10> 201214ZMM3028 ... 3235 (< 80)< 250+8 ... +10> 22.51013ZMM3331 ... 3540 (< 80)< 250+8 ... +10> 25912ZMM3634 ... 3840 (< 90)< 250+8 ... +10> 27911ZMM3937 ... 4150 (< 90)< 300+10 ... +12> 29810ZMM4340 ... 4660 (< 100)< 700+10 ... +12> 3279.2ZMM4744 ... 5070 (< 100)< 750+10 ... +12> 3568.5ZMM5148 (54)70 (< 100)< 750+10 ... +12> 3867.8ZMM5652.0 … 60.0(4)<135(4)<1000(5)typ. +10(4)–––ZMM6258.0 … 66.0(4)<150(4)<1000(5)typ. +10(4)–––ZMM6864.0 … 72.0(4)<200(4)<1000(5)typ. +10(4)–––ZMM7570.0 … 79.0(4)<250(4)<1500(5)typ. +10(4)–––NOTES:(1) Tested with pulses t p = 5 ms(2) Valid provided that electrodes are kept at ambient temperature(3) The ZMM1 is a silicon diode operated in forward direction. Hence, the index of all parameters should be “F” instead of “Z”Connect the cathode electrode to the negative pole (4) at I Z = 2.5 mA (5) at I Z = 0.5 mAELECTRICAL CHARACTERISTICSRatings at 25°C ambient temperature unless otherwise specified.TypeZener Voltage (1)at I Z = 5 mAV Z Vat I Z = 5 mA f = 1 kHz r zj Ωat I Z = 1 mA f = 1 kHz r zj ΩTemp. Coeff.of Zener Voltageat I Z = 5 mA αVZ 10–4/K Reverse Voltage atI R = 100 nAV R V atT amb = 45°C I Z = mA Admissable Zener current (2)atT amb = 25°C I Z = mA Dynamic Resistance。

ZMM16中文资料

FEATURES♦Silicon Planar Zener Diodes♦In Mini-MELF case especially for automatic insertion.♦The Zener voltages are graded according to the international E 24 standard. Smaller voltagetolerances and other Zener voltages are available upon request.♦These diodes are also available in DO-35 case with the type designation ZPD1 … ZPD51.MECHANICAL DATACase:Mini-MELF Glass Case (SOD-80)Weight:approx. 0.05 gMAXIMUM RATINGSRatings at 25°C ambient temperature unless otherwise specified.SYMBOL VALUE UNITZener Current (see Table “Characteristics”)Power Dissipation at T amb = 25°C P tot 500(1)mW Junction Temperature T j 175°C Storage Temperature RangeT S– 55 to +175°CZENER DIODES.142 (3.6).019 (0.48)∅Cathode Mark.063 (1.6).134 (3.4).055 (1.4).011 (0.28)Dimensions are in inches and (millimeters)ZMM1(3)0.7 ... 0.8 6.5 (< 8)< 50– 26 ... – 23–280340ZMM2.7 2.5 ... 2.975 (< 83)< 500– 9 ... – 4–135160ZMM3 2.8 ... 3.280 (< 95)< 500– 9 ... – 3–117140ZMM3.3 3.1 ... 3.580 (< 95)< 500– 8 ... – 3–109130ZMM3.6 3.4 ... 3.880 (< 95)< 500– 8 ... – 3–101120ZMM3.9 3.7 ... 4.180 (< 95)< 500– 7 ... – 3–92110ZMM4.3 4.0 ... 4.680 (< 95)< 500– 6 ... – 1–85100ZMM4.7 4.4 ... 5.070 (< 78)< 500– 5 ... +2–7690ZMM5.1 4.8 ... 5.430 (< 60)< 480– 3 ... +4> 0.86780ZMM5.6 5.2 ... 6.010 (< 40)< 400– 2 ... +6> 15970ZMM6.2 5.8 ... 6.6 4.8 (< 10)< 200– 1 ... +7> 25464ZMM6.8 6.4 ... 7.2 4.5 (< 8)< 150+2 ... +7> 34958ZMM7.57.0 ... 7.9 4 (< 7)< 50+3 ... +7> 54453ZMM8.27.7 ... 8.7 4.5 (< 7)< 50+4 ... +7> 64047ZMM9.18.5 ... 9.6 4.8 (< 10)< 50+5 ... +8> 73643ZMM109.4 ... 10.6 5.2 (< 15)< 70+5 ... +8> 7.53340ZMM1110.4 ... 11.6 6 (< 20)< 70+5 ... +9> 8.53036ZMM1211.4 ... 12.77 (< 20)< 90+6 ... +9> 92832ZMM1312.4 ... 14.19 (< 25)< 110+7 ... +9> 102529ZMM1513.8 ... 15.611 (< 30)< 110+7 ... +9> 112327ZMM1615.3 ... 17.113 (< 40)< 170+8 ... +9.5> 122024ZMM1816.8 ... 19.118 (< 50)< 170+8 ... +9.5> 141821ZMM2018.8 ... 21.220 (< 50)< 220+8 ... +10> 151720ZMM2220.8 ... 23.325 (< 55)< 220+8 ... +10> 171618ZMM2422.8 ... 25.628 (< 80)< 220+8 ... +10> 181316ZMM2725.1 ... 28.930 (< 80)< 250+8 ... +10> 201214ZMM3028 ... 3235 (< 80)< 250+8 ... +10> 22.51013ZMM3331 ... 3540 (< 80)< 250+8 ... +10> 25912ZMM3634 ... 3840 (< 90)< 250+8 ... +10> 27911ZMM3937 ... 4150 (< 90)< 300+10 ... +12> 29810ZMM4340 ... 4660 (< 100)< 700+10 ... +12> 3279.2ZMM4744 ... 5070 (< 100)< 750+10 ... +12> 3568.5ZMM5148 (54)70 (< 100)< 750+10 ... +12> 3867.8ZMM5652.0 … 60.0(4)<135(4)<1000(5)typ. +10(4)–––ZMM6258.0 … 66.0(4)<150(4)<1000(5)typ. +10(4)–––ZMM6864.0 … 72.0(4)<200(4)<1000(5)typ. +10(4)–––ZMM7570.0 … 79.0(4)<250(4)<1500(5)typ. +10(4)–––NOTES:(1) Tested with pulses t p = 5 ms(2) Valid provided that electrodes are kept at ambient temperature(3) The ZMM1 is a silicon diode operated in forward direction. Hence, the index of all parameters should be “F” instead of “Z”Connect the cathode electrode to the negative pole (4) at I Z = 2.5 mA (5) at I Z = 0.5 mAELECTRICAL CHARACTERISTICSRatings at 25°C ambient temperature unless otherwise specified.TypeZener Voltage (1)at I Z = 5 mAV Z Vat I Z = 5 mA f = 1 kHz r zj Ωat I Z = 1 mA f = 1 kHz r zj ΩTemp. Coeff.of Zener Voltageat I Z = 5 mA αVZ 10–4/K Reverse Voltage atI R = 100 nAV R V atT amb = 45°C I Z = mA Admissable Zener current (2)atT amb = 25°C I Z = mA Dynamic Resistance。

ZPD30中文资料(General Semiconductor)中文数据手册「EasyDatasheet - 矽搜」

温度 . COEFF.
齐纳电压
at IZ =5毫安
反电压
at IR = 100 nA
vz (10 /K)
VR (V)
–26 ... –23
–
–9 ... –4
–
–9 ... –3
–
–8 ... –3
–
–8 ... –3
–
–7 ... –3
–
–6 ... –1
–
–5 ... +2
–
–3 ... +4
芯片中文手册,看全文,戳ZPD1 THRU NhomakorabeaZPD75
齐纳二极管
DO-35
硅平面齐纳二极管
特征
齐纳电压是根据国际电子12标准渐变.较小电压容限等齐纳电压可根据要求提供.
分钟. 1.083（27.5） max. .079 (2.0)
阴极
最大. 0.150（3.8） Mark
这些二极管也可在Mini-MELF情况同类型名称ZMM1 ... ZMM75.
最大额定值
稳压电流（见表"特色"）
在T功率耗散
amb = 25°C
结温
存储温度范围
SYMBOL
VALUE
UNIT
Ptot
500 (1)
mW
Tj
175
°C
TS
- 55到+175
°C
NOTES: (1) Valid provided that leadsat a distance of 8 mm from case are kept at ambient temperature.
齐纳电压
at IZ =5毫安

SAP通用事务码（附FI解析）

SAP通⽤事务码（附FI解析）FI事务码解析6⼀、FI清帐事务码61.总账清帐~F-03 62.客户清帐~F-32 63.供应商清帐~F-44 64.收客户款记账清帐~F-28=F-06 65.付供应商款记账并清帐~F-53=F-07 66.万能过账清帐~F-04=F-30 67.万能⾃动清帐~F.13 7⼆、FI基础数据事务码71.总账科⽬维护~FS00 72.创建客户~FD01=XD01 73.创建供应商~FK01=XK01 74.创建固定资产~AS01 7三、FI业务操作事务码71.总账科⽬记账~F-02 7四、FI报表查询事务码81.客户余额查询-FD10N 8 2供应商余额查询-FK10N 83.总账余额查询-FS10N 84.客户⾏项⽬查询-FBL5N 85.供应商⾏项⽬查询-FBL1N 86.总账⾏项⽬查询-FBL3N 87.检查交货单是否⽣成会计凭证-VFX3 8 8查询移动类型明细-MB51 8 9查询库存明细-MB5B 8五、固定资产事务码81.创建资产主数据-AS01 82.主数据修改调拨-AS02 83.主数据冻结/删除-AS05/AS06 84.查看固定资产详细信息-AW01N 8 5固定资产报废-ABAVN 86固定资产公司间调拨-ABT1N 87.固定资产折旧运⾏-AFAB 88.资产明细账和总账的校对-ABST2 8 9资产会计年度更改-AJRW 8 10.资产年末余额结转-AJAB 9 11在建⼯程分配设定-AIAB9 12.在建结算（转固定）-AIBU 9CO事务码解析9⼀、主数据91.创建初级要素-KA01 92.创建次级要素-KA06 93.维护成本中⼼-KS01、2、3、4 94.维护统计指标-KK01、2、3、4 95.维护成本中⼼组-KSH1、2、3、4 9 6作业类型维护-KL01、2、3 9 7内部订单-KO01、2、3 9 8分配维护-KSV1、2、3 9 9分摊维护-KSU1、2、3 9 10.统计指标参数维护-KB31N 9⼆、业务操作91.执⾏分配-KSV5 92.执⾏分摊-KSU5 93.维护作业计划价格-KP26 94.单个估算成品物料-CK11N 105.批量估算成品物料-CK40N 106.成本估算价格标记发布-CK40 107.实际费⽤归集成作业类型-KSS2 108.实际作业价格计算-KSS I109.⼯单重估-CON2 1010.在制品计算-KAAO 1011.⽣产订单结算-CO88 1012.⽣产订单成本分析-KOC4 1013.成本中⼼重过账-KB11N（费⽤凭证成本中⼼冲销）10三、CO报表101.成本中⼼报表-S-ALR-87013611 10 2内部订单报表-S-ALR-87012993 103.批量成本估算报表-S-ALR-87099930 104.⽣产订单成本分析报表-CO03转分析10 MM事务码解析10⼀、主数据101.主数据维护-MM01、2、6 102.创建信息记录-ME11、12、15 10⼆、MM业务操作111.询价单-ME41、42、45、47 112.创建采购申请-ME51N 113.采购订单维护-ME21N、22、29 114.购订单收货-MIGO 115.发货-MB1A 116.转移记账-MB1B 117.其他收货-MB1C 118.MB02-更改物料凭证119.取消发票凭证-MR8M 1110.发票总览-MIR6 1111.维护盘点凭证-MI01、02 1112.输⼊盘点结果-MI04 1113.盘点差异过账-MI07 11三、MM报表111.物料清单-MM60 112.显⽰信息记录-ME13 113.审核信息记录-ZTM004 114.显⽰供应商-XK03 115.库存总览-MMBE 116.供应商清单显⽰-MKVZ 127.采购申请清单显⽰-ME5A 128.按供应商显⽰采购订单-ME2L 129.按物料显⽰采购订单-ME2M 1210.物料凭证清单显⽰-MB51 1211.物料的会计凭证-MR51 1212.显⽰仓库现有库存-MB52 1213.记账⽇期库存-MB5B 1214.查询在途库存-MB5T 12^`MM开发事务代码12PP 12⼯艺路线导⼊-ZPP001 12 BOM批量导⼊-ZPP002 12订货会需求查看-ZPP003 12营销订单预排协同-ZPP005 12营销订单拆成⽣产指令单-ZPP006 12⼯序外协批量下达-ZPP007 12 MRP监视报表-ZPP008 12鞋贴打印与补打-ZPP010 12唯⼀码⽣成-ZPP011 12⼿⼯报⼯-ZPP012 13扫描⼊库-ZPP013 13⼯艺路线批量查询-ZPP016 13⽣产指令单打印-ZPP018 13 MM 13鞋类成品库存报表查询-ZMM001 13⼯⼚间调拨查询报表-ZMM002 13费⽤类订单查询报表-ZMM007 13采购信息记录查询报表-ZMM018 13 AFS总仓收货内向交货单下发WMS-ZMM010 13 AFS总仓退货⾄供应商内向交货单下发WMS-ZMM012 13按货号创建⼤货材料采购订单-ZMM026 13⽤料明细审批-ZMM026A 13制定采购收获计划-ZMM027 13领料单创建-ZMM027A13领料单查看编辑-ZMM027B13领料单发货-ZMM027C 13领料单冲销-ZMM027D 13异常事件分类配置表维护-ZMM028 13成品⽣产发货-ZMM038A 13成品总仓收货-ZMM038B14成品总仓销售收货-ZMM038C 14成品总仓销售退货收货-ZMM038D 14 AFS采购订单查询报表-ZMM006 14订货会需求转成品采购订单-ZMM040 14鞋类成品拆装箱-ZMM041 14维护成品物流运输异常事件-ZMM042、43、44 14成品⼊库凭证打印-ZMM045 14材料⼊库凭证打印-ZMM046 14⼯序外协物料⼊库凭证打印-ZMM047 14材料公司间调拨-ZMM052 14采购信息记录导⼊-ZMM057 14⼯序外协采购订单打印-ZMM058 14盘点批量创建处理-ZMM059 14⾮箱码成品扫描⼊库-Z MM059A 14SD事务码解析14⼀、主数据141.创建销售客户-XD01 14 2客户清单- 14⼆、SD业务操作151.创建销售订单-VA01 152.创建合同-VA41 153.销售开票-VF01 154.创建交货-VL01N 15三、SD报表151.查看销售订单-VA03 152.销售订单清单-VA05 15 3销售合同清单-VA45 15 4查看合同-VA43 15 5查看交货单-VL03N 15PP事务码解析15⼀、主数据15⼆、PP业务操作161.创建⽣产订单-CO01 162.⽣产订单⼯序报⼯-CO11N 163.⽣产订单多⼯序报⼯-CO12 16 4取消⽣产订单报⼯-CO13 16 5⼯⼚运⾏MRP-MD01 16 6物料MRP运⾏-MD02 167.⽣产订单收货-MB31 168.⽣产订单排产-ZC06 169.批量⽣产订单下达-CO05/CO05N 16三、PP报表161.BOM显⽰-CS03 162.BOM各种显⽰-CS11、12、13 163.BOM批量查询-XXX待开发164.⼯作中⼼显⽰-CR03 165.⼯作中⼼清单查询-CR05 166.⼯作中⼼的成本中⼼查询-CR06 167.⼯艺路线显⽰-CA03 168.⽣产订单报⼯显⽰-CO14 169.按物料查询⽣产订单-CO21 16 FI事务码解析1.总账清帐~F-03这个是对总账的⼀个清帐，结果显⽰查看FBL3N，红灯变绿灯，表⽰清帐成功。

ZMM5V6中文资料

0 4 8 12 16 20
30
40
20
20
10
0
0
VZ, ZENER VOLTAGE (V) Fig. 1, Zener Current vs Zener Voltage
15
600
NOT FOR NEW DESIGN, 1000 USE BZT52C2V4 - BZT52C51
DIFFERENTIAL ZENER IMPEDANCE (W)
VR = 2V Tj = 25°C
5
25
200
Cj, JUNCTION CAPACITANCE (pF)
150
100
50
0
0
5
10
15
20
25
VZ, ZENER VOLTAGE (V) Fig. 5, Junction Capacitance vs Zener Voltage
DS18005 Rev. H-3
Characteristic Forward Voltage @ IF = 200mA Thermal Resistance, Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Notes:
1. Tested with Pulses, tp = 20ms. 2. Valid provided that Electrodes are kept at Ambient Temperature.
DS18005 Rev. H-3
2 of 3
ZMM2V4-ZMM75
元器件交易网
100
50
Ptot = 500mW TA = 25°C

ZMM5252B中文资料(WILLAS ELECTRONIC)中文数据手册「EasyDatasheet - 矽搜」

5264
ZMM5265B
62.0
58.90
65.10
185
2.0
1400
0.25
0.1
47.0
5265
ZMM5266B
68.0
64.60
71.40
230
1.8
1600
0.25
0.1
52.0
5266
ZMM5267B
75.0
71.25
78.75
270
1.7
1700
0.25
0.1
56.0
5267
1）基于直流测量达到热平衡;引线长度=9.5毫米（3/8"）;散热器= 30K / W热阻
5244
ZMM5245B
15.0
14.25
15.75
16
8.5
600
0.25
0.1
11.0
5245
ZMM5246B
16.0
15.20
16.80
17
7.8
600
0.25
0.1
12.0
5246
ZMM5247B
17.0
16.15
17.85
19
7.4
600
0.25
0.1
13.0
5247
ZMM5248B
18.0
类型
max. .006 (0.15)
符号
PTOT IZ Tj Tstg
值
500
PV/V Z -65到+175 –65 至 +175
单元
mW
mA °C °C
.010 (0.25) min.
Marking Code: 测JV o试r 4条件

ZMM5V1中文资料

Type Number
Temperature Coefficient (%/K) -0.09 to -0.06 -0.09 to -0.06 -0.08 to -0.05 -0.08 to -0.05 -0.08 to -0.05 -0.08 to -0.05 -0.06 to -0.03 -0.05 to +0.02 -0.02 to +0.02 -0.05 to +0.05 0.03 to 0.06 0.03 to 0.07 0.03 to 0.07 0.03 to 0.08 0.03 to 0.09 0.03 to 0.10 0.03 to 0.11 0.03 to 0.11 0.03 to 0.11 0.03 to 0.11 0.03 to 0.11 0.03 to 0.11 0.03 to 0.11 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12 0.04 to 0.12
Characteristic Forward Voltage @ IF = 200mA Thermal Resistance, Junction to Ambient Air (Note 2) Operating and Storage Temperature Range Notes:
1. Tested with Pulses, tp = 20ms. 2. Valid provided that Electrodes are kept at Ambient Temperature.

ZMM牌稳压二极管资料

DS18005 Rev. H-3
2 of 3
ZMM2V4-ZMM75
100
50
Ptot = 500mW TA = 25°C
Ptot = 500mw TA = 25°C
IZ, ZENER CURRENT (mA)
80
40
60
IZ, ZENER CURRENT (mA)
0 4 8 12 16 20
30
40
20
20
10
0
0
VZ, ZENER VOLTAGE (V) Fig. 1, Zener Current vs Zener Voltage
15
600
NOT FOR NEW DESIGN, 1000 USE BZT52C2V4 - BZT52C51
DIFFERENTIAL ZENER IMPEDANCE (W)
120
160
200
1
TA, AMBIENT TEMPERATURE (°C) Fig. 3, Power Dissipation vs Ambient Temperature
0
10 15 20 VZ, ZENER VOLTAGE (V) Fig. 4, Differential Zener Impedance
Notes:
1. Tested with pulses tp = 20 ms. 2. Valid provided that electrodes are kept at ambient temperature.
NOT FOR NEW DESIGN, USE BZT52C2V4 - BZT52C51
ZMM2V4 - ZMM75
500mW SURFACE MOUNT ZENER DIODE Features

物料清单(BOM表)完整版本

78
玻璃二极管\ZMM87V
01.DJG.BL2078
ZMM87V
79
玻璃二极管\ZMM88V
01.DJG.BL2079
ZMM88V
80
玻璃二极管\ZMM89V
01.DJG.BL2080
ZMM89V
81
玻璃二极管\ZMM90V
01.DJG.BL2081
ZMM90V
82
玻璃二极管\ZMM91V
01.DJG.BL2082
个个捆捆公斤瓶罐公斤升把把把把个把个个个个个个个把付把把套个台条个台个
1 1 ？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？？
30
玻璃二极管\ZMM39V
01.DJG.BL2030
31
玻璃二极管\ZMM40V
01.DJG.BL2031
32
玻璃二极管\ZMM41V
01.DJG.BL2032
33
玻璃二极管\ZMM42V
01.DJG.BL2033
34
玻璃二极管\ZMM43V
01.DJG.BL2034
35
玻璃二极管\ZMM44V
01.DJG.BL2035
01.DJG.BL2073
ZMM82V
74
玻璃二极管\ZMM83V
01.DJG.BL2074
ZMM83V
75
玻璃二极管\ZMM84V
01.DJG.BL2075

ZDM软件用户手册

ZDM CAD辅助设计软件简介这是一个由水利水电设计人员，在AutoCAD平台上开发出来的CAD辅助设计软件。

内容包括水利水电设计的各个专业。

软件采用分布组件工具集方式，各种工具俯首可得, 运用之妙存乎一心。

经过工程测试，如果你只使用该软件的通用功能部分，综合效率可提高50%，如果你使用它的专业通用部分，综合效率可提高数倍以上。

如果你使用它的专业部分，综合效率可提高数10倍以上。

对于小型水利水电设计部门，该软件为各专业都提供了CAD辅助设计的全套解决方案。

ZDM软件可用于AutoCAD2004到AutoCAD2009各个版本，软件由以下模块组成：1、AutoCAD绘制、编辑、计算统计、文字处理扩展功能及工程常用图形绘制2、钢筋图软件包（钢筋绘制、标注、自动生成钢筋表材料表、图、表关联修改）。

3、断面法开挖计算（桩号设置、地形图切剖面、纵横断面自动生成、分类计算断面面积，统计工程量）。

断面放坡法开挖计算（直接在平面地形图上生成坡脚线，计算工程量）。

4、三维实体开挖计算软件包（生成三维实体地形，挖、填实体，计算开挖）。

5、土地平整，土方计算（可计算平整为阶梯形、坡面的土方量）。

6、自动生成水电工程常用管道附件展开图、通过相贯线生成任意岔管展开图。

7、溢流堰曲线自动生成、渡槽计算、库容计算、河道断面数据提取。

8、施工横道图绘制、施工强度曲线、人工曲线自动生成软件包。

9、建筑规划软件包（建筑平立面图绘制，写坐标自动生成坐标表、面积长度分类计算统计）。

10、电气软件包（常用电气接线图、设备绘制、端子图自动生成）。

11、管道软件包（管道单、双线图、管道附件绘制、材料统计，自动生成材料表、）。

12、渠道开挖工程量计算、管线设计工具软件包。

三十年设计经验、十年磨一剑。

上至国家级水利水电设计院，下至乡、镇水利人员，数千用户，每天都用这个软件。

通用、实用、灵活、方便，亦看用户评价，下载试用，技术支持，请登录水利工程网 zdm软件使用论坛。

MA27D27资料

■ Electrical Characteristics Ta = 25°C ± 3°C
Parameter Forward voltage Symbol VF1 VF2 Reverse current Terminal capacitance Reverse recovery time
*
Conditions IF = 10 mA IF = 100 mA VR = 10 V VR = 0 V, f = 1 MHz IF = IR = 100 mA Irr = 10 mA, RL = 100 Ω
2
SKH00122AED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.