S553-6500-40中文资料

合集下载

proton-electrotex(普拉动)产品介绍修改版

资质
• 2002年: 公司质量管理认证通过 ISO9001标准。
• 2007: 公司生态管理系统认证通过 ISO 14001标准。
• 2007年: 产品通过“联邦生态、科技和核控制机构” 认证，产品可应用于核工业。
• 2009: 产品通过 “RZHD 技术控制”认证
.
2
员工
普拉动电气公司非常注重员工的技术水平，每年都会安排“专业技能的批准” 和“专业技能的提高”等相关项目供员工成长。目前有43名学生边在莫斯科电力大学和奥廖尔理工大学深造边致力于研究公司的项目，毕业后成为公司的专业人员。
T343-800-18 T123-320-18 T233-500-16 T233-500-16 T353-1000-28 T253-1250-18 T373-2000-28 T373-2500-18
T343-800-18 T443-630-28 T343-800-18
T353-1600-18 T353-1600-18 T253-1390-24
99.5x35
Dynex Dynex
DCR950F65 DCR1050F42
T653-800-65 T553-800-44
DYNEX
6500
947(60)
1.08
0.960
1200 0.0171 125
6500
979(60)
1.05
1.100
630 0.0180 125
4200
830(80)
1.10
Polovodice Polovodice Polovodice
Eupec
Westcode Westcode Westcode Westcode Westcode Westcode Westcode Westcode

艾雷斯科技工控产品

尺寸（L×W）:202.00mm×245.00mm 工作温度:-10℃～60℃ 相对湿度:5%～90%@25℃（非凝露）电源类型:ATX 电源
产品 5：ACS-4051VE
产品名称：产品型号：产品类别：
ACS-4051VE
ACS-4051VE 嵌入式 PC104 板卡系列
驱动下载
产品特点
● 网络接口：集成 1 个 INTEL 82562ET 和 1 个 82559ER（可选） ● 10/100M 自适应以太网控制器，RJ-45 接口
产品 3：ACS-6599
产品名称：产品型号：产品类别：
ACS-6599 ACS-6599 网安主板
驱动下载
产品特点
采用 Intel？ E7520 +6300ESB 芯片组 >支持双 Intel？Xeon？ 64 位处理器 >具备 8DDR2 内存扩展插槽，最大支持 16GB DDR2 400 的双通道内存架构 >具有 8 个 PCI-Express 接口的 Intel 82571EB 千兆位以太网接口 >一个 PCI_E X8 插槽 >一个 PCI_X 插槽 >一个 PCI 扩展槽 >多种存储介质选择：2 个串行 ATA（ＳＡＴＡ）通道，２个ＩＤＥ通道，1 个 Compact Flash （CF）卡插槽, 2 个 SCSI 接口 >支持 1-255 秒软件可编程看门狗计时器性能参数: 优势: 处理器/高速缓存：采用 socket604 mPGA 封装的至强处理器。支持 1-2 颗英特尔？至强？处理器, 至强 64 位处理器具备 2MB 大容量二级缓存，支持超线程 (HT) 技术、英特尔？ 64 位内存扩展技术 1 和英特尔增强型 SpeedStep？技术 2 可与支持 64 位的操作系统和应用程序兼容；用较低的运作成本降低了功耗。系统的前端总线 800M，运行频率为 2.8G-3.2G 的英特尔？至强 64 位处理器。板载设备：芯片组：Intel？ E7520 北桥芯片组，Intel？6300ESB 南桥芯片组网络板载显卡：ATI RAGE XL 显卡，板载 8M 显存网络：采用 4 个 Intel？82571EB 芯片的 PCI-Express 千兆位以太网控制器韧体芯片: SST49LF004A 4M bit Flash 芯片超级 I/O: Winbond W83627 芯片;

Secure Series II 产品说明书

This document provides firmware update instructions and describes what is new in this firmware version for the SUHD553-L, SUHD653-L, SUHD753-L, SUHD863-L.This is the initial release for the Secure Series II panels (SUHD553-L, SUHD653-L, SUHD753-L, SUHD863-L) for the Scaler firmware v1.0.1.8 and Ethernet firmware v14.Follow these steps to update the scaler firmware.Learn how to update the scaler firmware.Christie recommends updating the scaler firmware using the USB method as it is faster than the webserver update method.1.Upload the firmware for the A/D board.2.Plug in a USB memory to the service terminal.3.Enter the Factory-Menu.To enter the Factory-Menu by remote control:After version 1.0.2.1-114.5.Select USB Update.For compatible USB storage devices a Connected message appears. Proceed to step 5. If the USB storage device is not compatible, proceed to step 6.6.If Connected appears, select USB Update.The firmware is updated automatically and the panel goes into Standby mode after a successfulfirmware update (about 30 seconds).a.Reset the main power switch to turn the panel back on.b.When the firmware update is complete, From the Factory-Menu perform an Initial Setting.c.After Initial Setting, power off the panel using the rocker-switch.d.Wait at least 10 seconds and power the panel back on.7.If the USB storage device is not compatible, a Not Connected USB message appears.8.For the software version to upload correctly, ensure the filename is SUHD983P.bin.Follow these steps to update the Ethernet firmware.1.To use a static IP address, select Disable under DHCP.•The default static IP address is 192.168.10.10.•At initial power on, it may take up to 30 seconds for the IP address to be active.2.Select DHCP Enable to use a dynamic IP address.•If there is router, the IP address starts with 192.166.•If there is no router, the IP address starts with 169.254.1.Go to Local Network Setting > Internet protocol version 4 (TCP/IPv4).2.If DHCP is disabled, set the IP address and Subnet mask.The IP address must be a different address than the display.IP address : 192.168.10.50Subnet Mask : 255.255.255.03.If DHCP is enabled, select Obtain an IP address automatically.The ping test checks the Ethernet connection.1.Press Windows + R.2.Type cmd and click OK.3.Type ping –t 192.168.10.10.4.Replace the IP address with the address of the display panel.A response similar to below indicates the ping test was successful.A response similar to below indicates the ping test failed.Connect to the built-in web server open a Web browser (for example, Internet Explorer, Chrome) and follow the instructions below.1.In a web browser, go to the address of the display panel.The web page provides all menu controls on the on-screen display.2.To set a value, click Apply.3.To display the current value, click Read.4.To upgrade the Ethernet or Scaler firmware, go to the General settings page.•Ethernet firmware update time: approximately 5 minutes.File name : Ethernet_FW_Secure_Series_II_V*.bin•Scaler firmware update time: approximately 8 minutesSecure_Series_II.binIf you updated the scaler firmware using the USB method, it does not need to be updated again inthe web server.Before staring the updates, ensure the following settings are selected in the Setup menu of the WebUI or the on screen display:•Setup > Power Save > Off•Setup > Power Off Mode > StandbyScaler F/W update:The panel turns off approximately three minutes after the update starts. Once the update is complete (takes approximately five to eight minutes) an Update completed. Please reboot. messageappears on the WebUI and the panel powers on.Ethernet F/W update:The panel stays on throughout the update. Once the update is complete (takes approximately five to eight minutes) an Update completed. Please reboot. message appears on the WebUI and thepanel stays on.5.Power off the unit using the remote control.6.Power cycle the panel by turning the rocker switch to the OFF position and back to ON after 15 seconds.7.Power on the panel.8.To confirm version of the firmware, click the About page on the WebUI or the panel on-screen display. For installation, setup, and user information, see the product documentation available on the Christiewebsite. Read all instructions before using or servicing this product.1.Access the documentation from the Christie website:•Go to this URL: https://bit.ly/2VccFTr orhttps:///products/lcd-panels/secure-series-II/•Scan the QR code using a QR code reader app on a smartphone or tablet.2.On the product page, select the model and switch to the Downloads tab.Additional information on the LCD panels is available in the following documents.•Secure Series II LCD Panels Product Safety Guide (P/N: 020-001778-XX)•Secure Series II LCD Display Panels External Commands (P/N: 020-001915-XX)•SUHD553-L LCD Panels Service Guide (P/N: 020-001850-XX)•SUHD653-L LCD Panels Service Guide (P/N: 020-001851-XX)•SUHD753-L LCD Panels Service Guide (P/N: 020-001876-XX)•SUHD863-L LCD Panels Service Guide (P/N:020-001877-XX)Technical support for Christie products is available at:•North and South America: +1-800-221-8025 or ************************************•Europe, Middle East, and Africa: +44 (0) 1189 778111 or ********************************•Asia Pacific•Australia: +61 (0)7 3624 4888•China: +86 10 6561 0240•India: +91 (80) 6708 9999•Japan: 81-3-3599-7481•Singapore: +65 6877-8737•South Korea: +82 2 702 1601•Christie Professional Services: +1-800-550-3061 or ***********************。

MS5540C中文版

每个模块都在二个温度和二个压力下被单独地制作校准。6个系数必需对过程变化和温度变化给予补偿并存储在每个模块的64位可编程存储器上。必须由微型控制器软件读取这64位 (分成四个16位字节)并且用于D1和D2转换成补偿压力和温度值。
压力和温度测量
压力和温度读数次序和软件补偿操作在图3，图5的流程图里有描述。首先通过串行接口读取1段字节到4段字节。重起连接MS5540C串行接口的微控制器后可以立即完成1段字节到4段字节的读取。其次补偿系数C1到C6通过逻辑和转移操作逐位提取(参见图4). 为压力测量微控制器在闭路环内(例如每秒钟)必须通过串行接口为压力(D1)和温度(D2) 读 16个位值。然后，根据图3的运算法则，补偿的压力在D1、D2和C1至C6外面被计算(根据图5，可能使用二次方温度补偿).增殖的结果也许是由32位长决定(+sign)。在流程中根据图3每次增殖伴随一次分裂。这次分裂可以通过逐位转移执行(到功率2是除数)。可以保证的是这些分裂的结果少于65536(16位)。由于信号定时由1段字节到4段字节，D1和 D2读出，请参见“串行接口”章节
联系人：孙兰波
联系电话：15011554804
Emal ：lanbo301@
9
Fig. 3:压力/温度读取和软件补偿流程图
注意
1)可以不连续地读取D2，但在这种情况下结果将是较为不稳定的。 2)为0.1mbar分辨率显示的稳定性，建议显示8其后的压力平均值。
联系人：孙兰波
联系电话：15011554804
*-40°C 到 +85°C 工作温度
*无需外部组件
结构图
联系人：孙兰波
联系电话：15011554804
Emal ：lanbo301@

西奥电梯553参数表大全

西奥电梯553参数表大全【最新版】目录1.电梯概述2.参数表内容3.参数表解读4.西奥电梯 553 的特点与应用正文一、电梯概述西奥电梯 553 是一款备受关注的电梯产品，它凭借出色的性能和可靠的安全性在市场上取得了良好的口碑。

为了帮助用户更好地了解和操作这款电梯，本文将为您详细介绍西奥电梯 553 的参数表大全。

二、参数表内容西奥电梯 553 的参数表包括以下几个方面的内容：1.基本参数：包括电梯型号、载重、速度等基本信息。

2.功能参数：包括电梯的运行方式、控制方式、门系统等具体功能参数。

3.安全参数：包括电梯的安全保护装置、故障处理、紧急救援等安全相关参数。

4.电气参数：包括电梯的电源、电压、功率等电气方面的参数。

5.结构参数：包括电梯的各个部件的尺寸、材质、重量等结构方面的参数。

三、参数表解读1.基本参数：西奥电梯 553 的载重能力为 500kg，速度为 0.3m/s，这些参数决定了电梯的运载能力和运行效率。

2.功能参数：西奥电梯 553 采用先进的微机控制系统，实现无级变速、自动平层等功能，为用户提供舒适、安全的乘坐体验。

3.安全参数：西奥电梯 553 配备了多种安全保护装置，如限速器、安全钳、缓冲器等，确保电梯在各种异常情况下能够及时采取措施，保障乘客安全。

4.电气参数：西奥电梯 553 采用 220V/50Hz 的交流电源，功率为1.5kW，满足电梯正常运行的电力需求。

5.结构参数：西奥电梯 553 的各个部件均采用优质材料制造，具有良好的耐磨、耐腐蚀性能，保证了电梯的长期稳定运行。

四、西奥电梯 553 的特点与应用西奥电梯 553 以其出色的性能和可靠的安全性，广泛应用于住宅、商业、工业等领域。

无论是在家中、商场还是在办公楼，西奥电梯 553 都能为您提供便捷、舒适的垂直交通服务。

SES5VT553-5 中文资料

WE05MF 中文PDF资料参数特点电路图
替换型号:WE05MF SES5VT553-5， NZQA6V8AXV5T1G，NZQA6V2XV5T1G，MSMF05LC-P ，EMZ6.8ET2R RSA6.1J4
WE05MF是低电容、±15kV ESD保护二极管阵列，具有集成的瞬态电压抑制器(TVS)箝位，适用于高速与通用信号的ESD保护。

低输入电容使这些器件可理想用于HDTV、PC 监视器、PC外设、服务器互连、数据通信，以及机箱间互连中信号的ESD保护。

每个通道都包含一个二极管，可以将ESD电流脉冲导引到VCC或GND。

WE05MF提供的保护针对IEC 61000-4-2规定的最高±15kV人体模型、±8kV接触放电以及±15kV气隙放电的ESD脉冲。

集成的TVS确保在出现ESD冲击时，VCC电压的上升被箝位在已知的电压。

电路图
原理和配置
电参数
电性能参数
外形图-SOT-553:
尺寸规格
DIM 英寸外型尺寸
Z 0.0708 1.80
G 0.0354 0.90
P 0.0197 TYP 0.50 TYP
X 0.0118 0.3
来源: 第一价值网(IC网络超市)。

S553-6500-61中文资料

©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.01ELECTRICAL SPECIFICATIONS at 25° CMECHANICALDimensions are in inches [millimeters].Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted.S553-5692-08S553-5692-09S553-6500-35S553-6500-40S553-6500-43S553-6500-44S553-6500-55S553-6500-58S553-6500-61S553-6500-66S553-6500-69©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.01SCHEMATICSS553-5692-08S553-5692-09S553-6500-35123467891112131416171819403938353433302928252423510152021263136RXO-RXOCT RXO+TXIN+TXIN-RXO-RXOCT RXO+RXO-TXIN+TXIN-RXOCT RXO+RXO-TXIN+TXIN-RXO+RXOCT TXIN+TXIN-RXIN-RXIN+TXO+RXIN-RXIN+RXIN-TXO+TXO-RXIN+RXIN-TXO+TXO-RXIN+TXO+TXO-TXO-1234678912131416171819403938353433302928252423510152021263136RXO-RXOCT RXO+TXIN+TXIN-RXO-RXOCT RXO+RXO-TXIN+TXIN-RXOCT RXO+RXO-TXIN+TXIN-RXO+RXOCT TXIN+TXIN-RXIN-RXIN+TXO+RXIN-RXIN+RXIN-TXO+TXO-RXIN+RXIN-TXO+TXO-RXIN+TXO+TXO-TXO-1234567891012131415161718192040RXO+RXOCT RXO-TXIN+TXIN-RXO+RXOCT RXO-TXIN+TXIN-RXO+RXOCT RXO-TXIN-TXIN+TXIN-TXIN+RXO-RXO+RXOCT TXO-TXOCT TXO-TXO-TXO-TXO+TXO+TXO+TXO+TXOCT TXOCTTXOCT RXIN+RXIN+RXIN+RXIN+RXIN-RXIN-RXIN-RXIN-S553-6500-401234567891011121314151617181920RXIN-RXINCT RXIN+TXIN+TXIN-RXIN-RXINCT RXIN+RXIN-TXIN+TXIN-RXINCT RXIN+RXIN-TXIN+TXIN-RXIN+RXINCT TXIN+TXIN-4039383736353433323130292827212223242526RXO-TXOCT RXO+TXO+TXO-RXO-TXOCT RXO+RXO-TXO+TXO-TXOCT RXO+RXO-TXO+TXO-RXO+TXOCT TXO+TXO-©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.01SCHEMATICSS553-6500-43S553-6500-44S553-6500-581345689101113141516181920RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+40383736353332313028272625232221RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+1345689101113141516181920RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+40383736353332313028272625232221RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+123467891112131416171819RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXIN-RXIN+TXO-TXO+40393837353433323029282725242322RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+510152021263136TXOCT TXOCT TXOCT TXOCT RXOCT RXOCT RXOCT RXOCT S553-6500-551234567891012131415161718192040TXO+TXINCT TXO-RXIN+RXIN-TXO+TXINCT TXO-TXIN+RXIN-TXO+TXINCT TXO-RXIN+RXIN+RXO-RXO+TXO-TXO+TXINCT RXIN-RXINCT RXIN-RXIN+RXINCTRINCTRXINCT RXO+TXIN+TXIN+TXIN+TXIN-TXIN-TXIN-TXIN-RXO+RXO-RXO-RXO-RXO+CORPORATEBel Fuse Inc.206 Van Vorst Street Jersey City, NJ 07302T el 201-432-0463FAR EASTBel Fuse Ltd.8F / 8 Luk Hop Street San Po KongKowloon, Hong Kong EUROPEBel Fuse Europe Ltd.Preston T echnology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K.©2000 Bel Fuse Inc. Specifications subject to change without notice. 06.01S553-6500-61SCHEMATICSS553-6500-66S553-6500-691234678912131416171819RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXIN-RXIN+TXO-TXO+40393837353433323029282725242322RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+123467891112131416171819RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXIN-RXIN+TXO-TXO+40393837353433323029282725242322RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+1234678912131416171819RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXO-RXO+TXIN-TXIN+RXIN-RXIN+TXO-TXO+40393837353433323029282725242322RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+RXIN-RXIN+TXO-TXO+510152021263136TXOCT TXOCT TXOCT TXOCT RXOCT RXOCT RXOCT RXOCT •Octal transformer solutions for T1/E1 applications including concentrators, channel banks and cellular base stations•Octals utilize Bel’s popular 40-pin SMD package •Designed to meet the stringent demands of high density designs•Minimum interwinding breakdown voltage of 1500 Vrms •Designed for UL1459/UL1950•For operating temperature range of -40° to +85° C,OCL is 600µH minimum at -40° C。

各种型号碳粉对应通用机型对照表

品名编号型号适用机型 RMB/KGFC220/230PC3/5/7/11/25/745/795/ FC220/310/530/770/230/330/902/E16/21/31 A15/30 55NPG-1 NPG-4/5NP 3100 /1215 /1015 /3030/3020/3200/1318/3050/3325/4080/60253825/4050/6030/1218/1510/2020/2120/6020/201055NP1010 NP 1010 57 NPG-13 NP6035/623055 NPG-6/7/8 NP6000/7000/8000/6650/6150/8530/6080/6150Ⅱ/7050/7550/8070/5060/8570/858055 NPG-3/12 NP6050/6550/6250/608555 NPG-10/14/3NP6050/6045/6030/6545/6551/6560/60356230/55GP-605GP-605 GP1/555/55055 NGP-26/25/20GP330/335/405/GR2/355/315/210/215/220/225/ IR2270/IR3570/IR457058NGP-16IR5000/IR600055 NGP-18 IR2200/IR2210/IR2220/IR2800/IR3300 55NGP-19 NGP-1 IR8500/105/105+/9070 IR550/600/7200 GP605/555/550 55 NGP-20IR-155/165/1600/1600N/1610/200/2000/2010/2200/2800/33055NGP-21 IR1510 55NGP-25IR2230/2270/2830/2870/3570/4570GP215/40555NGP-26 IR3530/3570/4570 55NGP-27 IR5570/6570 55佳能CANONNGP-28 IR2016 55GR121XR1027/1025/1038/5025/5026/5416/5421/1017/1035/5615/5618/551865V330 V250/330/228/250/258/338/388/5320/5322 65V400V455/500/555/5340/5343/5350656R343 5008/5240/5260/5280/50096R359 5370/5309/5310 施乐XEROX6R737/333 XC351/355/356/520/540/560无品名编号型号适用机型106R00280 W315/320/415/420/518/412 65 6R914 XD102/100/103/104/105/125/130/15565 106R445/647416/421无施乐 XEROXF440/469 ABLE1321/3321/1180/3180/1250/1251/13501351/ 1405/1406/DC250/350/400/251/351/220/DC230/265ST/332/340/420/432/440/505/600605/705/755 65SF125/126 SF1016/1018/1020/1116/11865126ST/216ST SF2116/2118/2020/2120/2016/2018/2021/2022/2027 65230ST/240ST SF2025/2030/2530/2040/2540/2035/2040/2050/2052 65SF7370 SF7370/7800/7850/7300 65 SF850 SF8850/8570/9550/8100 65AR-200TD AR160/161/200/205/162/163/201/206/207 68AR201/203ST M160/2821/1818/AR215/235/275/255 162 163 165 201 205 206 209 1820 2616 2618 2620 27182818 2820 2918 68AR270/271ST M208/236/276 68AL100TD AL1000/1200/1220/1240/1250/1000/1001/1010/1020/1200/ 1241/1250/1251/1340/1451/1551/1820/1818 68AR-153ST AR158/250/255/280/285/286/335/336/337/405/407/507/151/155686R914 XD100/102/103/104/125/130/155 68AR5030 AR5130/5122/5230/5020/5320/5030/5230 无AR450/451ST M350/450/280/310U/M300/M420U 无AR330/400ST AR250/280/285/286/366/337/405/407/336 无AR500ST AR501/505/507 无夏普SHARPSD2060SD2060/3062TYPE-410/420FT4418/4220/4215/4221/4525/4415/4222/442258FT5010/4800 FT4420/4430/4470/4480/4490/4495/5010/5560/4530 58 TYPE-450I TF4022/4027/5035/5535/5632/5832/5640/5840/5627/4527F 58 FT4000 FT4000/4020/4030/4035/4040/4060/4065/4085 58FT1305 FT4015/4018/4615/4621/3813 58理光RICOHFT610FT6035/6050/6645/6655/6665/58TYPE610FT4500/5500/6500/7650/665/6650/7660/7670/5550/5570/ 6550/7070/Aficio550/650/551/700/1055无FT5010 FT4430/4480/4490/4495/470058 889511 FT3300/3320无1270D Aficio1250D/1013/1515/1515M 651140D Aficio1015/1018/1220D/1115P/1113/1012 651230D Aficio2015/2018/mp1610L/2020D/MP1000/2000/1610/ 2015L/2018D/1800/2000SP65221OD Aficio2210/270/220/250/200 65 2220D Aficio1022/1027/2022/2027/2032/3025/3030 653200D Aficio340/345/350/355/450/455/400/500/649/850/1055 700/551/1045/1035 653210D Aficio2035/2045/3200D 653205D Aficio1030/1045/1035/320D/3205D 65AF6210D Aficio1060/1075/2051/2060/2075/5500/6500/7500 65 理光RICOH5305D/5200D 5100DAficio551/5305D/550/650/700/1055/6550Imajio5550/5570/6500/7070/1060无T-1710C T1710 2050 2310 2500 2540 1650 60 T-1550C T1560 1550 1580 156860T-2060C T2860 2040 2060 2068 2870 2878 60T-3560CT3560 3570 4560 4570 206060T-85P BD1310 3810 391060 DP-5580 DP5570 6570 8070 4580 5560 6560 E55 E65 E80 T-1600C E-168 168S 163 203 230 169 208 258 259 16 160 60T-2500CE20 25 200 250 20960 T-3500C/3520C E-358 458 288 45 35 28/350 450 352 452 65 E550 E550 650 81065 T1640C 163 165 203 166 167 206 207 23765BD5540BD5540 6550 6555 7550 SD5540 7650 7560 766065东芝TOSHIBAT-6560 BD 5560 6560无 7320/6225/7261Lanier 7320 7328 722870雷立LANIER53555355 5365 5480 7345 7335 7328 7228 7216无名称编号型号适用机型MT-ⅡEP 4230 4232 4233 4250 3170 4300 1232 450 470 49058 MT101A0 1080 1051 1070 1081 58 MT102AEP1052 1083 1085 201058MT104A EP1054 10851084 58MT201A EP2050 58MT202A EP2080 58MT204AEP2030 3000 3010 58MT401AEP3050 405058MT501A EP 58MT601A EP6000 5000 58MT602A EP6001 5050 600058 MT105A/106ADI180 181 152 183 183S 1611 2011 181165 MT302A DI200 250 251 350 351 251F 65 TN114162 180 210 7516 752165MT502A DI450 550 470 65MT603A DI520 620 65 K-1212 1015 1212 2120 1218 2020 1216 2223 58K-20282028 4045 3035 4145 3135 3240 3340 233058 TN101KKM7075 7085 7165 7155 7216 7020 7255 7030 70357130 7218 7220 65 美能达MINOLTA 柯卡尼KONICAU7050KM7118 7050 7060 7150 7160 7055 7065 7020 70407033 7145 71355 M9000 M9000 9100 8210 8010 8110 65 联想LENOVOM9215M9215 9218 9325 933265DC-AO DC211 2137037090011 DC 1560 1860 2060 2360 2050 25501670 1755 70 TK418 410 411 KM 1620 1650 2020 2050 2550 2520 2030 165 100 1500 85370AB001KM 2530 3530 4030 3035 4035 5035 6330 3070 553085 DC1855 DC1555 1605 1656 1657 1685 1855 215570 KM1525 KM1525 1530 2070 150570 京瓷美达KYOCERA MITAKM5230AI 2310 3010 4040 5050 1505 1510 1810 4230 523070FP16801670 1680 2080 7117 7121 TA1960 TF15 FP 7713 7715 7115 7113 60FQ-TK05/10 FP 7718 7722 7818 7824 7830 7728 60TU10C DP1510 1212 2120 1216 2223 1810 2010 65 DQ-TU10J-PB DP1820 1515 1570 1870 1510 1520 182070DQ-TUJ5K-PK DP1515 70DQ-TU15EDP1500 3010 2310 2330 3030 2310 3510 4510 6010 802070DP6530 DP8130FQ-TK20FP 7728 7735 7830 7835 无松下PANASONICDQ-TU18EDP2000 2500 3000 无震旦AURORA165 AD 165 158 159 259 309 359 40970打印机型号SERIESCOMMODITYNAMETYPE3906FHP5L/6L/1100/3100 /3150CanonAX/FX-3/460/465/66055CB388/488A HP1008/1005/1006/1505/1522/1120 70Q2613A/2624A HP1320/1300/2015/3005/1150/ 55 C7115A HP1000/1200/1220/1020/1010/2400/3050/3300 5592274AHP4L/4P/4ML/4MP/4LCCanonFX-2/PX/HX/430/P90/L50055C3903FHP5P/6P/5MP/6MPCanonFX-1/VX/LX/CX/430/430W/55Q2610A/4096A/C5949HP2100/N/M/SE/TN/XI/2200/4VC/4000/5000/4100/4300/4050CanonEX/SX/BX/TX/P27055C4127AX/C8061AHP4VC/4V/4MV/4000/4100/5000/8000/8100/4050/CanonBX/JX/304/309/P380/52X/62X55C4129XHP4000/5000/5100/CanonWX/NX/2460/P170/660055L-380 Canon FAXL-250/L-380，FX-3 5592298AHP4/4M/4+/4M+/5/5M/5NCanon EX/20/860/554092AHP1100/3200/1200/3100Canon22X/800/810/55C3909A/C4182 5SI/NX/3SI/4SI/8000/8100/8150 55 Q2612HP1010/1012/1015/1020/3015/3020/1220/2400/3050/55EP25 LBP1210/2900/3200 Canon 55EP22 LBPAX/440/460/660/465/210/310/Canon 55EPA LBP200/250/280/300/350/360/380 Canon 55Q1338A/1339A/5942A/Q7516AHP 4200/4300/4250/4350/5200 55CB388A P1007/1008 70 CB435A P1005/1006 70惠普/佳能HP/CANONCB436A M1120/1120N/1522N/1505/1505N XML-1210D 1210/1220M/1250/1430/1010/1610/1740 65 ML-1710D/D3 1510/1710/1610/1750/1520/1740/1640/2430/1630 65ML-4500D ML4500/4600/4300/5000A/5100A 65ML-5100D SF5100/5100P/530/535e/ML808/SF5000/5109 655112 SCX5112/5312F/4500 655800SF5800/5800P 65 ML-6060D6ML6060s/6160/1430/1440/1450/1451/1650/1651/4016658000 ML8000/8500 65 SF-503 SF503/508X SCX5312D6 5112/5312/4100/4016/4116/421655 113R00455 XEROXP8E/P8EX/385/3115/3110/3116/3120/ 3121/3130 X ML-1610D2 1610/1615无三星SAMSUNGML-2010D1 2010/2015/4521/4321 无 10S0150C E210/ E310/312/322/1850/215 65 522E520/522/62065 T640T420/430/520/522/620/622/630/632/634/640/644/642/320/7012A2202 69G8256 E310/312/312L/Optea/E/E+/4026 X 利盟LEXMARK12017SRE210/120NX 85EKX-FL313/318CN/MB238/258/778CN/85E/90E/94E/801/802/811/812/813/851/852/853/80KX-FA76KX-FL501/502/503/523/512/513/543/521/550/553/M551/M552/B751/B752/B753/803/813/888/853 75 P8585 P8585/490/8170/P590 X 513/83E KX-FL511/512/513 X 松下P ANASONIC90EKX-FL313CNXFZ-5000/6100A5100/A5000/5100N/5100P/6100(文杰) 65FZ-A201 A220/230/210（文景） 65FZ-A200 A280/200/280E/280P 65方正FOUDERA306 A306/406/A6100 65EPL5500/5700/5800/9200/1710 65S050010S050087 EPL5900/6100/6200 65S051077S051079EPL1220/2120/ 65S051069 EPL-N2010/1610/2180/1210/1620 65 5200EP5000/5200/5600 658400 LP8000/8200/8300/8400/8500/8600/9000/8100/8700659200 9200/N2000/N4000/9300/2000K/QMS 65 1710566-001 Minolta1100L/1200W/1250E/1300W （S05001通用）X 0938-306/402 Minolta SP302/Page works6/dell100 super laser 4010X 爱普生EPSONS051060Epl-N4000/T/FNT/LP9600/2060 Xerox n24/32/40 Fujits LB 303/306A/XL6700/XL6600XLT2519 LJ1900 75 LT-2020LJ2000/3000/2050/7020/7030/7130/3020/3120/3220/7120753200M3100/3200/N7000 75ld0116/0167/1418LJ1600/1610/1700/1800/ 75 LT-0112LJ2412P/2414P/6012MFP/6112MFC/6121 6212MFC/8212N/6L/6P/880/2312/6112/601275 LT0225LJ2312/8212N/6012MFP/6112MFC/6212MFC/LT00225/LJ 2500/2600/M6200/M7200/LJ5500/7500/N7000/7110/ 75 联想LENOVOLd1055/1060/2435LJ5500/6000/3500X PG1100L 1200 1250 /SP302 Work6 /651710566-001/0938-306.402/1710405-002/1710567-0011100,1200/1350,1400 652060 QMS 2060/ 653600 FAX1600/2600/2800/3600/3800 653500 FAX2500/3500 X美能达MINOLTA1300W1300W/1350W XSERIESCOMMODITYNAMEP ACKINGTYPE REMARK2880 BROTHER2880/2800 80 8370FAX8350/8750/6600/230/250/9660/4100/4750/ 575080HL2040HL1030/1230/1250/1270/1440/1450/1470/2040/ 2070/7220/5140/5250/2030//2075N/2045/6050D/ 2050/DPC7010/7020/7025MFC7220/7225N/7420/7820/FAX-2820 203A/204A/施乐205 通用80 兄弟BROTHERTN430/630HL1030/1230/1240/1150/1250/P2500 HL1430/1440/140/1470/1420X 施乐XEROX113R00455 109R00725P8e/P8ex/385/390ABLE3115/3116/3130/31003321/3221/1221/1321/N24/32/40/3225/402570TEC 1305 TEC1301/1306/1321/1323/3600 80OKI B4200B4200/4250/4100/4350 90TK-17 FS1010 1010N 1000 1050 1000F 1015 TK18/TK100 FS1018 MFP 1020D 1500 1820 TK-20 FS1700 3700 6700 6700S 6800TK-50FS1900 TK-55 FS1920 TK-60 FS1800 3800 TK-65 FS3820N 3830N TK-70/71 LS9100 9500 9500DN TK-110 FS720 820 920 京瓷美达 KYOLRA MITATK-120FS1030 2200 FAX-2200 NEC2700FAX 2500 2600 2700SERIES COMMODITYNAMEN.W. TYPE REMARKLBP5100 （BLACK）Canon2040/460/2160/660/LBP5100/5000/5360/5300320LBP5100 （CYAN）Canon2040/460/2160/660/LBP5100/5000/5360/5300LBP5100 （MAGENTA）Canon2040/460/2160/660/LBP5100/5000/5360/5300CANONLBP5100 （YELLOW）Canon2040/460/2160/660/LBP5100/5000/5360/5300HP-2600 （BLACK）HP1500/2500/2600/5500/4550/4600/8500/8550/3550/370/CM1215/1015/1017320HP-2600 （CYAN）HP1500/2500/2600/5500/4550/4600/8500/ 8550/3550/3700/ CM1215/1015/1017HP2600 （MAGENTA）HP1500/2500/2600/5500/4550/4600/8500/ 8550/3550/3700/ CM1215/1015/1017HPHP-2600 （YELLOW）HP1500/2500/2600/5500/4550/4600/8500/ 8550/3550/3700/ CM1215/1015/1017C900/C1900 （BLACK）C900/C1900/C1000/C2000/C8000/C8200/C8500/C8600320C900/C1900 （CYAN）C900/C1900/C1000/C2000/C8000/C8200/C8500/C8600C900/C1900 （MAGENTA）C900/C1900/C1000/C2000/C8000/C8200/C8500/C8600EPSONC900/C1900 （YELLOW）C900/C1900/C1000/C2000/C8000/C8200/C8500/C8600Minolta2500 （BLACK）Minolta330/2/DP/2200/2300/6100/2400/2500W/2530320Minolta2500 （CYAN）Minolta330/2/DP/2200/2300/6100/2400/2500W/2530Minolta2500 （MAGENTA）Minolta330/2/DP/2200/2300/6100/2400/2500W/2530MINOLTAMinolta2500 （YELLOW）Minolta330/2/DP/2200/2300/6100/2400/2500W/2530SERIES COMMODITYNAMEN.W. TYPEREMARK Xerox-620（BLACK）Xerox-620/625/2006/3310/4CR/410/831/7700/7750/C525/C1100/ 380 Xerox-620（CYAN）Xerox-620/625/2006/3310/4CR/410/831/7700/7750/C525/C1100/Xerox-620（MAGENTA）Xerox-620/625/2006/3310/4CR/410/831/7700/7750/C525/C1100/XEROXXerox-620 （YELLOW）Xerox-620/625/2006/3310/4CR/410/831/7700/7750/C525/C1100/CLP300（BLACK）CLP300/315/500/600/5100 360CLP300（CYAN）CLP300/315/500/600/5100CLP300 （MAGENTA）CLP300/315/500/600/5100SAMSUNGCLP300（YELLOW）CLP300/315/500/600/51003800（BLACK）1500/1600/2000/2200/4100/3800 3203800（CYAN）1500/1600/2000/2200/4100/38003800 （MAGENTA）1500/1600/2000/2200/4100/3800RICOH3800（YELLOW）1500/1600/2000/2200/4100/3800C8000（BLACK）5116/8500C/1800/7500/5500 380C8000（CYAN）5116/8500C/1800/7500/5500C8000 （YELLOW）5116/8500C/1800/7500/5500LENOVOC8000（BLACK）5116/8500C/1800/7500/5500SERIES COMMODITYNAMEN.W.TYPE REMARKC720（BLACK）C720/SC1275/C710/C510/C1200/C910/C912/T620/T622/W812/E320380C720（CYAN）C720/SC1275/C710/C510/C1200/C910/C912/T620/T622/W812/E320C720（MAGENTA）C720/SC1275/C710/C510/C1200/C910/C912/T620/T622/W812/E320LEXMARKC720 （YELLOW）C720/SC1275/C710/C510/C1200/C910/ C912/T620/T622/W812/E3203100（BLACK）3100/5100/5200/5300/7300/9300/9500 3603100（CYAN）3100/5100/5200/5300/7300/9300/95003100 （MAGENTA）3100/5100/5200/5300/7300/9300/9500OKI3100（YELLOW）3100/5100/5200/5300/7300/9300/9500 彩色复印机系列SERIES COMMODITYNAMEN.W.TYPE REMARK ARC350（BLACK）ARC150/330/350 360ARC350（CYAN）ARC150/330/350ARC350（MAGENTA）ARC150/330/350SHARPARC350（YELLOW）ARC150/330/350SERIES COMMODITYNAMEN.W. TYPE REMARK CLC5000（BLACK）Canon-CLC5000+/5100/3900/3900+/4000 300CLC5000（CYAN）Canon-CLC5000+/5100/3900/3900+/4000CLC5000（MAGENTA）Canon-CLC5000+/5100/3900/3900+/4000CLC5000（YELLOW）Canon-CLC5000+/5100/3900/3900+/4000CLC3100（BLACK）Canon-CLC1000/1000S/2400/3100 300CLC3100（CYAN）Canon-CLC1000/1000S/2400/3100CLC3100（MAGENTA）Canon-CLC1000/1000S/2400/3100CLC3100（YELLOW）Canon-CLC1000/1000S/2400/3100IRC3200（BLACK）Canon-C3200/2050/2600/3220 300IRC3200（CYAN）Canon-C3200/2050/2600/3220IRC3200（MAGENTA）Canon-C3200/2050/2600/3220IRC3200（YELLOW）Canon-C3200/2050/2600/3220CP660（BLACK）Canon-CP660/IRC624 300CP660（CYAN）Canon-CP660/IRC624CP660（MAGENTA）Canon-CP660/IRC624CANONCP660（YELLOW）Canon-CP660/IRC624SERIES COMMODITYNAMEN.W. TYPEREMARK DC1250（BLACK）DC-4/DC-6/DC1250/DC2060/DC1255/DC2045/DC3525/DC5750/DC5760/5790/DC6060320DC1250（CYAN）DC-4/DC-6/DC1250/DC2060/DC1255/DC2045/DC3525/DC5750/DC5760/5790/DC6060 DC1250（MAGENTA）DC-4/DC-6/DC1250/DC2060/DC1255/DC2045/DC3525/DC5750/DC5760/5790/DC6060 DC1250（YELLOW）DC-4/DC-6/DC1250/DC2060/DC1255/DC2045/DC3525/DC5750/DC5760/5790/DC6060 DC400（BLACK）DC400/450/500/600 320DC400（CYAN）DC400/450/500/600DC400（MAGENTA）DC400/450/500/600XEROXDC400（YELLOW）DC400/450/500/600TN310（BLACK）BzC350/351/450/200/252/203/353 360TN310（CYAN）BzC350/351/450/200/252/203/353TN310（MAGENTA）BzC350/351/450/200/252/203/353TN310（YELLOW）BzC350/351/450/200/252/203/353TN611（BLACK）BzC550/451/650/5500/500 360TN611（CYAN）BzC550/451/650/5500/500TN611 （MAGENTA）BzC550/451/650/5500/500 360KONIKAMINOLTATN611（YELLOW）BzC550/451/650/5500/500SERIES COMMODITYNAMEN.W. TYPEREMARK 6020（BLACK）Kx-mc6020 3806020（CYAN）Kx-mc60206020（MAGENTA）Kx-mc60206020（YELLOW）Kx-mc6020323（BLACK）DCP323/213/262/322/354/264/263/264 360323（CYAN）DCP323/213/262/322/354/264/263/264323（MAGENTA）DCP323/213/262/322/354/264/263/264PANASONIC323（YELLOW）DCP323/213/262/322/354/264/263/2643500C （BLACK）E-STUDIO281C/2330C/2500C/4520C/351C/3500C/3510C/3530C/2830C/451C3603500C （CYAN）E-STUDIO281C/2330C/2500C/4520C/351C/ 3500C/3510C/3530C/2830C/451C3500C （MAGENTA）E-STUDIO281C/2330C/2500C/4520C/351C/ 3500C/3510C/3530C/2830C/451CTOSHIBA3500C （YELLOW）E-STUDIO281C/2330C/2500C/4520C/351C/ 3500C/3510C/3530C/2830C/451C2238C（BLACK）2238C/MPC2500/MPC4500 3602238C（CYAN）2238CMPC2500/MPC45002238C （MAGENTA）2238CMPC2500/MPC4500RICOH2238C（YELLOW）2238CMPC2500/MPC4500。

proton-electrotex(普拉动)产品介绍修改版

100x35
T193-2500-44
4400 3990(70) 0.95 0.150 630 0.0057 125
99.5x35
ABB
5STP03D6500
6500 380(70) 1.20 2.300 700 (min) 0.0360 125
34x26
T643-320-65
6500 431(70) 1.00 2.500 630 0.0350 125
150
0.0160 125
0.165
160
0.0180 125
0.152
150
0.0160 125
0.165
160
0.0180 125
0.265
200
0.0160 125
TV 907-860-18 TV907-800-22 T907-1000-12
T918-1770-14 T918-2010-12 TV918-1500-20
T1929N32
N0782YS160 N1159NC420 N1467NS200 N0676YS180 N0606YS200 N1159NC390 N1802NC140 N2172ZC380
0.570
250 0.0220 125
4400
930(80)
1.20
0.650
250 0.0180 125
47x26
50x26
48x26
50x26
8
Semikron Semikron Semikron Semikron Semikron Semikron Semikron Semikron
Polovodice Polovodice Polovodice
Polovodice Polovodice Polovodice

GB150材料-2010

（3）抗回火脆化技术要求 a. 化学成分回火脆化指数 J=(Si+Mn)×(P+Sn)×104≤150 Cu≤0.20％、Ni≤0.30％根据需方要求J≤100 b. 回火脆化试验 VTr54+2.5△VTr54≤10℃ （4）生产情况
9. 16MnDR钢板（1）新旧标准对比标准
厚度 mm
12. 07MnNiVDR钢板（1）钢号简介（2）化学成分标准钢号 Ni ％ Mo ％ P ％ S ％ Pcm ％ GB19189-2003 07MnNiMoVDR 0.20～0.50 0.10～0.30 ≤0.020 ≤0.010 ≤0.21 GB19189-(2010) 07MnNiVDR 0.20～0.50 ≤0.30 ≤0.018 ≤0.008 ≤0.21
6. 13MnNiMoR钢板（1）钢号简介（2）磷、硫含量和冲击功指标标准钢号 P ％ S ％ KV2 J GB6654-1996 13MnNiMoNbR ≤0.025 ≤0.025 0℃，≥34 GB713-2008 13MnNiMoR ≤0.020 ≤0.010 0℃，≥41
（3）许用应力（板厚＞100mm～150mm）钢号许用应力 20℃ MPa 350℃ Q345R 178 113 13MnNiMoR 211 211
（3）力学性能标准钢号厚度 mm Rm MPa ReL MPa -40℃ KV2 J （4）生产情况 GB19189-2003 GB19189-(2010) 07MnNiMoVDR 12～60 610～730 ≥490 ≥47 07MnNiVDR 10～60 610～730 ≥490 ≥80
Ni ％ 8.50～10.00
b. 力学性能（板厚≤30mm）标准钢号交货状态 Rm MPa ReL(ReH)MPa -196℃ KV2 J GB150.2附录A 06Ni9DR 调质1 680～820 ≥560 ≥100 EN10028-4:2003 ASME(2007) X7Ni9 调质2 680～820 （≥585） ≥80 SA553-I 调质 690～825 （≥585） ≥27

S4600系列产品培训资料

二. 产品规格
• S4600-28P-SI端口规格
• 24个10M/100M/1000M自适应RJ45电口 • 4个SFP千兆双模端口
支持百兆光(100-FX)模式
10M/100M/1000M 自适应 RJ45 电口，芯片集成 RTL8218B外Phy。
SFP端口,芯片集成RTL8214FC，外 phy, 支持符合 (SFF8472/IEEE802.3) 标准（SR/LR）的SFP光模块。
二. 产品规格
3 ：S4600-10P-SI规格参数 • 机箱尺寸 250*180*43.6（mm） • 重量约1.1kg（标配） • 电源输入 100 ～ 240VAC(50~60Hz) • 系统功耗最大20W • 运行温度 -5°C～50°C • 储藏温度 -40°C～70°C • 相对湿度 5%～95%，无凝结 • 噪声无噪声
系统指示灯：绿色常亮表示系统正在启动，绿色慢闪（ 1s 频率）表示系统运行正常，绿色常亮或者绿色灭灯表示系统故障
电源指示灯：绿色常亮表示正常供电，灭表示无电
二. 产品规格
S4600-52P-SI电源及散热
100～240V AC 50～60HZ 36W电源模块（标配1个，无冗余设计）
down时，环路收敛时间大于50ms 产生条件：当ERPS环路节点为port-channel逻辑端口
规避措施：建议使用物理端口作为ERPS环节点
七.存在缺陷及规避措施
3：缺陷三 Bug号： RDM33196 问题现象：在QOS功能中，动作设置为同时修改报文IP DSCP和cos时，只有一个动作生效。产生条件：需要同时修改报文的IP优先级及cos的应用场景规避措施：无 4：缺陷四： Bug号： RDM34188 问题现象：配置端口的入口带宽限制，端口进入的流量为TCP应用时，传输数据限速波动达到50% 产生条件：配置入口带宽限制，当流量为TCP应用时，比如利用tcp上传文件，传输的速率会上下波

2771K资料

T1-92
CORPORATE
Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542
FAR EAST
Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706
SCHEMATICS
2771M S553-6500-84 2771K
4
S
5
S 4 5 2 3 1 Primary 6 8 Secondary
7 6 1 Primary 2 Secondary 8
©2000 Bel Fuse Inc. Specifications subject to change without notice. 09.00
TM00141
•ICAL SPECIFICATIONS AT 25° C
Turns Ratio ± 2% Pri : Sec 2771K 2771M S553-6500-84 1 CT : 2 1 : 1.37 CT 1 CT : 1 DCR Primary Inductance1 mH min 2.75 1.10 2.75 Leakage Inductance2 µH max Pri 2.8 0.65 2.8 0.70 0.45 0.70
0.008 (0.203) 2 PLACES
Unless otherwise specified, dimensions are nominal and in inches (millimeters).

CS5532-BSZR;CS5534-BSZR;CDB5532U;中文规格书,Datasheet资料

Copyright © Cirrus Logic, Inc. 2008CS5532/34-BS24-bit ∆Σ ADCs with Ultra-low-noise PGIAFeaturesChopper-stabilized PGIA (ProgrammableGain Instrumentation Amplifier, 1x to 64x)– 6 nV/√Hz @ 0.1 Hz (No 1/f noise) at 64x –1200pA Input Current with Gains >1 Delta-sigma Analog-to-digital Converter –Linearity Error: 0.0007% FS–Noise-free Resolution: Up to 23 bits Two- or Four-channel Differential MUX Scalable Input Span via Calibration –±5 mV to differential ±2.5VScalable V REF Input: Up to Analog Supply Simple Three-wire Serial Interface –SPI™ and Microwire™ Compatible –Schmitt Trigger on Serial Clock (SCLK) R/W Calibration Registers Per Channel Selectable Word Rates: 6.25 to 3,840 Sps Selectable 50 or 60 Hz RejectionPower Supply Configurations–VA+ = +5 V; VA- = 0 V; VD+ = +3 V to +5 V–VA+ = +2.5 V; VA- = -2.5 V; VD+ = +3 V to +5 V –VA+ = +3 V; VA- = -3 V; VD+ = +3 VGeneral DescriptionThe CS5532/34 are highly integrated ∆Σ Analog-to-Digi-tal Converters (ADCs) which use charge-balance techniques to achieve 24-bit performance. The ADCs are optimized for measuring low-level unipolar or bipolar signals in weigh scale, process control, scientific, and medical applications.To accommodate these applications, the ADCs come as either two-channel (CS5532) or four-channel (CS5534)devices and include a very low-noise, chopper-stabilized instrumentation amplifier (6 nV/√Hz @ 0.1 Hz) with se-lectable gains of 1×, 2×, 4×, 8×, 16×, 32×, and 64×.These ADCs also include a fourth-order ∆Σ modulator followed by a digital filter which provides twenty selectable output word rates of 6.25, 7.5, 12.5, 15, 25, 30, 50, 60, 100,120, 200, 240, 400, 480, 800, 960, 1600, 1920, 3200, and 3840 Sps (MCLK =4.9152MHz).To ease communication between the ADCs and a micro-controller, the converters include a simple three-wire se-rial interface which is SPI™ and Microwire™ compatible with a Schmitt-trigger input on the serial clock (SCLK).High dynamic range, programmable output rates, and flexible power supply options makes these ADCs ideal solutions for weigh scale and process control applications.ORDERING INFORMATIONSee page 47VA+C1C2VREF+VREF-VD+DIFFERENTIAL 4TH ORDER ∆ΣMODULATORPGIA 1,2,4,8,16PROGRAMMABLE SINC FIR FILTERMUX(CS5534SHOWN)AIN1+AIN1-AIN2+AIN2-AIN3+AIN3-AIN4+AIN4-SERIAL INTERFACELATCHCLOCK GENERATORCALIBRATION SRAM/CONTROLLOGICDGNDCSSDI SDO SCLKOSC2OSC1A1A0/GUARD VA-32,64OCT ‘08TABLE OF CONTENTS1.CHARACTERISTICS AND SPECIFICATIONS (4)ANALOG CHARACTERISTICS (4)TYPICAL RMS NOISE (NV) (7)TYPICAL NOISE-FREE RESOLUTION(BITS) (7)5 V DIGITAL CHARACTERISTICS (8)3 V DIGITAL CHARACTERISTICS (8)DYNAMIC CHARACTERISTICS (9)ABSOLUTE MAXIMUM RATINGS (9)SWITCHING CHARACTERISTICS (10)2.GENERAL DESCRIPTION (12)2.1.Analog Input (12)2.1.1. Analog Input Span (13)2.1.2. Multiplexed Settling Limitations (13)2.1.3. Voltage Noise Density Performance (13)2.1.4. No Offset DAC (14)2.2.Overview of ADC Register Structure and Operating Modes (14)2.2.1. System Initialization (15)2.2.2. Serial Port Interface (22)2.2.3. Reading/Writing On-Chip Registers (23)2.3.Configuration Register (23)2.3.1. Power Consumption (23)2.3.2. System Reset Sequence (23)2.3.3. Input Short (24)2.3.4. Guard Signal (24)2.3.5. Voltage Reference Select (24)2.3.6. Output Latch Pins (24)2.3.7. Offset and Gain Select (25)2.3.8. Filter Rate Select (25)2.4.Setting up the CSRs for a Measurement (27)2.5.Calibration (30)2.5.1. Calibration Registers (30)2.5.2. Performing Calibrations (31)2.5.3. Self Calibration (31)2.5.4. System Calibration (32)2.5.5. Calibration Tips (32)2.5.6. Limitations in Calibration Range (33)2.6.Performing Conversions (33)2.6.1. Single Conversion Mode (33)2.6.2. Continuous Conversion Mode (34)2.6.3. Examples of Using CSRs to Perform Conversions and Calibrations (35)ing Multiple ADCs Synchronously (36)2.8.Conversion Output Coding (36)2.9.Digital Filter (38)2.10.Clock Generator (39)2.11.Power Supply Arrangements (39)2.12.Getting Started (43)2.13.PCB Layout (43)3.PIN DESCRIPTIONS (44)4.SPECIFICATION DEFINITIONS (46)5.ORDERING INFORMATION (47)6.ENVIRONMENTAL, MANUFACTURING, & HANDLING INFORMATION (47)7.PACKAGE DRAWINGS (48)LIST OF FIGURESFigure 1. SDI Write Timing (Not to Scale) (11)Figure 2. SDO Read Timing (Not to Scale) (11)Figure 3. Multiplexer Configuration (12)Figure 4. Input models for AIN+ and AIN- pins (13)Figure 5. Measured Voltage Noise Density (13)Figure 6. CS5532/34 Register Diagram (14)Figure 7. Command and Data Word Timing (22)Figure 8. Guard Signal Shielding Scheme (24)Figure 9. Input Reference Model when VRS = 1 (25)Figure 10. Input Reference Model when VRS = 0 (25)Figure 11. Self Calibration of Offset (32)Figure 12. Self Calibration of Gain (32)Figure 13. System Calibration of Offset (32)Figure 14. System Calibration of Gain (32)Figure 15. Synchronizing Multiple ADCs (36)Figure 16. Digital Filter Response (WR = 60 Sps) (38)Figure 18. 120 Sps Filter Phase Plot to 120 Hz (38)Figure 17. 120 Sps Filter Magnitude Plot to 120 Hz (38)Figure 19. Z-Transforms of Digital Filters (38)Figure 20. On-chip Oscillator Model (39)Figure 21. CS5532 Configured with a Single +5 V Supply (40)Figure 22. CS5532 Configured with ±2.5 V Analog Supplies (41)Figure 23. CS5532 Configured with ±3 V Analog Supplies (41)Figure 24. CS5532 Configured for Thermocouple Measurement (42)Figure 25. Bridge with Series Resistors (42)LIST OF TABLESTable 1. Conversion Timing – Single Mode (34)Table 2. Conversion Timing – Continuous Mode (35)Table 3. Command Byte Pointer (35)Table 4. Output Coding for 24-bit CS5532 and CS5534 (37)1. CHARACTERISTICS AND SPECIFICATIONSANALOG CHARACTERISTICS(VA+, VD+ = 5 V ±5%; VREF+ = 5 V; VA-, VREF-, DGND = 0 V; MCLK = 4.9152 MHz; OWR (Output Word Rate) = 60 Sps; Bipolar Mode; Gain = 32)(See Notes 1 and 2.)Notes: 1.Applies after system calibration at any temperature within -40 °C ~ +85 °C.2.Specifications guaranteed by design, characterization, and/or test. LSB is 24 bits.3. This specification applies to the device only and does not include any effects by external parasiticthermocouples. The PGIA contributes 5 nV of offset drift, and the modulator contributes 640/G nV of offset drift, where G is the amplifier gain setting.4.Drift over specified temperature range after calibration at power-up at 25 °C.ParameterMin Typ Max Unit Accuracy Linearity Error -±0.0007±0.0015%FS No Missing Codes 24--Bits Bipolar Offset -±16±32LSB 24Unipolar Offset-±32±64LSB 24Offset Drift(Notes 3 and 4)-640/G +5-nV/°C Bipolar Full-scale Error -±8±31ppm Unipolar Full-scale Error -±16±62ppm Full-scale Drift(Note 4)-2-ppm/°CANALOG CHARACTERISTICS (Continued)(See Notes 1 and 2.)Notes: 5.The voltage on the analog inputs is amplified by the PGIA, and becomes V CM ± Gain*(AIN+ - AIN-)/2 atthe differential outputs of the amplifier. In addition to the input common mode + signal requirements for the analog input pins, the differential outputs of the amplifier must remain between (VA- + 0.1 V) and (VA+ - 0.1 V) to avoid saturation of the output stage.6.See the section of the data sheet which discusses input models.7.Input current on AIN+ or AIN- (with Gain =1), or VREF+ or VREF- may increase to 250nA if operatedwithin 50mV of VA+ or VA-. This is due to the rough charge buffer being saturated under these conditions.ParameterMin TypMaxUnitAnalog InputCommon Mode + Signal on AIN+ or AIN-Bipolar/Unipolar ModeGain = 1 Gain = 2, 4, 8, 16, 32, 64(Note 5)VA-VA- + 0.7--VA+VA+ - 1.7V V CVF Current on AIN+ or AIN-Gain = 1 (Note 6, 7)Gain = 2, 4, 8, 16, 32, 64--501200--nA pA Input Current Noise Gain = 1 Gain = 2, 4, 8, 16, 32, 64--2001--pA/√Hz pA/√Hz Input Leakage for Mux when Off (at 25 °C)-10-pA Off-channel Mux Isolation -120-dB Open Circuit Detect Current 100300-nA Common Mode Rejection dc, Gain = 1dc, Gain = 6450, 60 Hz ---90130120---dB dB dB Input Capacitance -60-pF Guard Drive Output -20-µA Voltage Reference Input Range (VREF+) - (VREF-)1 2.5(VA+)-(VA-)V CVF Current (Note 6, 7)-50-nA Common Mode Rejection dc 50, 60 Hz --120120--dB dB Input Capacitance 11-22pF System Calibration Specifications Full-scale Calibration Range Bipolar/Unipolar Mode 3-110%FS Offset Calibration Range Bipolar Mode -100-100%FS Offset Calibration Range Unipolar Mode -90-90%FSANALOG CHARACTERISTICS (Continued)(See Notes 1 and 2.)8.All outputs unloaded. All input CMOS levels.9.Power is specified when the instrumentation amplifier (Gain ≥ 2) is on. Analog supply current is reducedby approximately 1/2 when the instrumentation amplifier is off (Gain = 1).10.Tested with 100 mV change on VA+ or VA-.ParameterMinTypMaxUnitPower SuppliesDC Power Supply Currents (Normal Mode)I A+, I A-I D+- - 130.5151mA mA Power ConsumptionNormal Mode (Notes 8 and 9)Standby Sleep---70450080--mW mW µW Power Supply Rejection (Note 10)dc Positive Supplies dc Negative Supply--115115--dB dBTYPICAL RMS NOISE (nV)(See notes 11, 12, 13 and 14)Notes:11.The -B devices provide the best noise specifications.12.Wideband noise aliased into the baseband. Referred to the input. Typical values shown for 25 °C.13.For Peak-to-Peak Noise multiply by 6.6 for all ranges and output rates.14.Word rates and -3dB points with FRS = 0. When FRS = 1, word rates and -3dB points scale by 5/6.TYPICAL NOISE-FREE RESOLUTION(BITS)(See Notes 15 and 16)15.Noise-free resolution listed is for bipolar operation, and is calculated as LOG((Input Span)/(6.6xRMSNoise))/LOG(2) rounded to the nearest bit. For unipolar operation, the input span is 1/2 as large, so one bit is lost. The input span is calculated in the analog input span section of the data sheet. The noise-free resolution table is computed with a value of 1.0 in the gain register. Values other than 1.0 will scale the noise, and change the noise-free resolution accordingly.16.“Noise-free resolution” is not the same as “effective resolution”. Effective resolution is based on theRMS noise value, while noise-free resolution is based on a peak-to-peak noise value specified as 6.6 times the RMS noise value. Effective resolution is calculated as LOG((Input Span)/(RMS Noise))/LOG(2).Specifications are subject to change without notice.Output Word Rate (Sps)-3 dB Filter Frequency (Hz)Instrumentation Amplifier Gain x64x32x16x8x4x2x17.5 1.948.59101526509915 3.88121315213770139307.751718213052991966015.524252942731402771203134364259103198392240628013626051410202050409048012211319436973014502900581096023015927452310302060411082301,920390260470912181036207230145003,84078013602690538010800215004300086000Output Word Rate (Sps)-3 dB Filter Frequency (Hz)Instrumentation Amplifier Gainx64x32x16x8x4x2x17.5 1.942021222323232315 3.8820212222222222307.75192021222222226015.5192021212121211203118192021212121240621717181818181848012217171717171717960230161617171717171,920390161616161616163,840780131313131313135 V DIGITAL CHARACTERISTICS(VA+, VD+ = 5 V ±5%; VA-, DGND = 0 V; See Notes 2 and 17.)3 V DIGITAL CHARACTERISTICS(T A = 25 °C; VA+ = 5V ±5%; VD+ = 3.0V±10%; VA-, DGND = 0V; See Notes 2 and 17.)17.All measurements performed under static conditions.ParameterSymbol Min Typ Max Unit High-level Input Voltage All Pins Except SCLKSCLK V IH 0.6 VD+(VD+) - 0.45--VD+VD+V Low-level Input Voltage All Pins Except SCLKSCLK V IL 0.00.0-0.80.6V High-level Output Voltage A0 and A1, I out = -1.0 mASDO, I out = -5.0 mA V OH (VA+) - 1.0(VD+) - 1.0--V Low-level Output Voltage A0 and A1, I out = 1.0 mASDO, I out = 5.0 mAV OL --(VA-) + 0.40.4V Input Leakage Current I in -±1±10µA SDO Tri-State Leakage Current I OZ --±10µA Digital Output Pin CapacitanceC out-9-pFParameterSymbol Min Typ Max Unit High-level Input Voltage All Pins Except SCLKSCLK V IH 0.6 VD+(VD+) - 0.45-VD+VD+V Low-level Input Voltage All Pins Except SCLKSCLK V IL 0.00.0-0.80.6V High-level Output Voltage A0 and A1, I out = -1.0 mASDO, I out = -5.0 mA V OH (VA+) - 1.0(VD+) - 1.0--V Low-level Output Voltage A0 and A1, I out = 1.0 mASDO, I out = 5.0 mAV OL --(VA-) + 0.40.4V Input Leakage Current I in -±1±10µA SDO Tri-State Leakage Current I OZ --±10µA Digital Output Pin CapacitanceC out-9-pFDYNAMIC CHARACTERISTICS18.The ADCs use a Sinc 5 filter for the 3200 Sps and 3840 Sps output word rate (OWR) and a Sinc 5 filterfollowed by a Sinc 3 filter for the other OWRs. OWR sinc5 refers to the 3200 Sps (FRS = 1) or 3840 Sps (FRS = 0) word rate associated with the Sinc 5 filter.19.The single conversion mode only outputs fully settled conversions. See Table 1 for more details aboutsingle conversion mode timing. OWR SC is used here to designate the different conversion time associated with single conversions.20.The continuous conversion mode outputs every conversion. This means that the filter’s settling timewith a full scale step input in the continuous conversion mode is dictated by the OWR.ABSOLUTE MAXIMUM RATINGS(DGND = 0 V; See Note 21.)Notes:21.All voltages with respect to ground.22.VA+ and VA- must satisfy {(VA+) - (VA-)} ≤ +6.6 V.23.VD+ and VA- must satisfy {(VD+) - (VA-)} ≤ +7.5 V.24.Applies to all pins including continuous overvoltage conditions at the analog input (AIN) pins.25.Transient current of up to 100 mA will not cause SCR latch-up. Maximum input current for a power supply pin is ±50 mA.26.Total power dissipation, including all input currents and output currents.WARNING:Operation at or beyond these limits may result in permanent damage to the device.Normal operation is not guaranteed at these extremes.ParameterSymbol Ratio Unit Modulator Sampling Ratef s MCLK/16Sps Filter Settling Time to 1/2 LSB (Full Scale Step Input)Single Conversion mode (Notes 18, 19, and 20)Continuous Conversion mode, OWR < 3200 Sps Continuous Conversion mode, OWR ≥ 3200 Spst s t s t s1/OWR SC5/OWR sinc5 + 3/OWR5/OWRs s sParameterSymbol Min Typ Max Unit DC Power Supplies(Notes 22 and 23)Positive Digital Positive Analog Negative Analog VD+VA+VA--0.3-0.3+0.3---+6.0+6.0-3.75V V V Input Current, Any Pin Except Supplies (Notes 24 and 25)I IN --±10mA Output Current I OUT--±25mA Power Dissipation (Note 26)PDN --500mW Analog Input Voltage VREF pins AIN PinsV INR V INA (VA-) -0.3(VA-) -0.3--(VA+) + 0.3(VA+) + 0.3V V Digital Input VoltageV IND -0.3-(VD+) + 0.3V Ambient Operating Temperature T A -40-85°C Storage Temperature T stg-65-150°CSWITCHING CHARACTERISTICS(VA+ = 2.5 V or 5 V ±5%; VA- = -2.5V±5% or 0 V; VD+ = 3.0 V ±10% or 5 V ±5%;DGND = 0 V; Levels: Logic 0 = 0 V, Logic 1 = VD+; C L = 50 pF; See Figures 1 and 2.)Notes:27.Device parameters are specified with a 4.9152 MHz clock.28.Specified using 10% and 90% points on waveform of interest. Output loaded with 50pF.29.Oscillator start-up time varies with crystal parameters. This specification does not apply when using anexternal clock source.ParameterSymbol Min Typ MaxUnitMaster Clock Frequency (Note 27)External Clock or Crystal OscillatorMCLK1 4.91525MHz Master Clock Duty Cycle 40-60%Rise Times(Note 28)Any Digital Input Except SCLKSCLKAny Digital Output t rise-----50 1.0100-µs µs ns Fall Times(Note 28)Any Digital Input Except SCLKSCLKAny Digital Output t fall-----50 1.0100-µs µs ns Start-upOscillator Start-up Time XTAL = 4.9152 MHz(Note 29)t ost-20-ms Serial Port Timing Serial Clock Frequency SCLK 0-2MHz Serial Clock Pulse Width High Pulse Width Lowt 1t 2250250----ns nsSDI Write TimingCS Enable to Valid Latch Clock t 350--ns Data Set-up Time prior to SCLK rising t 450--ns Data Hold Time After SCLK Rising t 5100--ns SCLK Falling Prior to CS Disable t 6100--nsSDO Read Timing CS to Data Validt 7--150ns SCLK Falling to New Data Bit t 8--150ns CS Rising to SDO Hi-Zt 9--150ns分销商库存信息:CIRRUS-LOGICCS5532-BSZR CS5534-BSZR CDB5532U。

553-XXXX中文资料

³
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
Reverse Polarity Option 1) Cathode Left
–010 Ordering Code Suffix required ONLY for Reverse Polarity Option
Dialight Corporation • 1501 Route 34 South • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 •
4-29
元器件交易网
RESISTOR 5 VOLTS - LED TYPE 03
Dimensions in mm [inches]
Standard Polarity shown in drawing: Cathode right
Features
• Multiple CBIs form horizontal LED arrays on 4.45mm (0.175”) center-lines. See page 4-41 and 4-42 for pre-assembled arrays • • • • • • High Contrast, UL 94 V-0 rated, black housing Oxygen index: 32% Polymer content: PBT, 0.343 g Housing stand-offs facilitate PCB cleaning Solderability per MIL-STD-202F, method 208F LEDs are safe for direct viewing per IEC 825-1, EN-60825-1

聚醚多元醇——精选推荐

聚醚多元醇聚氨酯硬泡的原料原料名称主要作用聚醚、聚酯或其它多元醇主反应原料多异氰酸酯（如粗MDI 等）主反应原料水链增长剂，化学发泡剂(产生CO2)物理发泡剂(如HCFC-141b、戊烷等)气化后作为气泡的来源，并可移去反应热交联剂提高泡沫的机械性能催化剂催化发泡及凝胶反应泡沫稳定剂使泡沫稳定，并控制泡孔的大小和结构抗氧剂提高抗热、氧老化，湿老化性能阻燃剂使泡沫塑料具有阻燃性颜料提供各种色泽聚氨酯泡沫塑料作为聚氨酯制品一大门类，原料品种多，范围广，下面对泡沫体系用的多元醇、异氰酸酯及助剂品种，特别是新型原料等作一介绍。

4.1 多元醇官能度起始剂氧化烯烃相对分子质量用途2 乙二醇、丙二醇、二乙二醇、二丙二醇、水等PO PO/EO 200～4000PU 弹性体类材料，软质、半硬质泡沫塑料等3 丙三醇、三羟甲基丙烷、三乙醇胺等PO PO/EO 400～6000软质、半硬质泡沫塑料及弹性体类材料等4 季戊四醇、乙二胺、甲苯二胺等PO PO/EO 400～800 硬泡、半硬泡、软泡5 木糖醇、二乙烯三胺等PO PO/EO 500～800 硬泡6山梨醇、甘露醇、a-甲基葡萄糖甙PO PO/EO1000 以下硬泡8 蔗糖PO PO/EO 500～15000 硬泡、高负荷软泡1．聚醚二醇凡含二个活泼氢的化合物，如乙二醇、丙二醇、一缩二乙二醇、二缩乙二醇、水等均可作为聚氧化丙烯二醇的聚合起始剂。

多以1,2-丙二醇为起始剂。

随丙二醇对氧化丙烯摩尔比的增大，所合成的聚醚相对分子质量降低，羟值增大。

聚醚二醇主要应用于制备聚氨酯软泡、弹性体、胶粘剂、纤维、合成革等。

由于二羟基聚醚与二异氰酸酯反应生成线型直链聚氨酯，所以起到增加泡沫柔软程度、延长拉伸性能的作用。

聚醚的相对分子质量越大，制品的柔软度、伸长率也越高。

2．聚醚三醇聚醚三醇一般以甘油(丙三醇)、三羟甲基丙烷等为起始剂而生产，是聚氨酯软泡、半硬泡和硬泡的基础原料，聚氨酯软泡和硬泡对聚醚的相对分子质量或羟值要求不同。

P4SMA550CA中文资料

20.50
22.80 25.20
1
33.2
12.3
5
P4SMA27A
P4SMA27CA 27A 27C
23.10
25.70 28.40
1
37.5
10.9
5
P4SMA30A
P4SMA30CA 30A 30C
25.60
28.50 31.50
1
41.4
9.9
5
P4SMA33A
P4SMA33CA 33A 33C
36.80
40.90 45.20
1
59.3
6.9
5
P4SMA47A
P4SMA47CA 47A 47C
40.20
44.70 49.40
1
64.8
6.3
5
P4SMA51A
P4SMA51CA 51A 51C
43.60
48.50 53.60
1
70.1
5.8
5
P4SMA56A
P4SMA56CA 56A 56C
Case:
JEDEC DO214AC. Molded plastic over
glass passivated junction
Mounting Position: Any
Polarity:
Color band denoted positive end
(cathode) except Bidirectional
(Volts)
Maximum Peak Pulse
Current IPP (A)
Maximum Reverse Leakage IR @ VR (µA)
P4SMA6.8A P4SMA6.8CA 6V8A 6V8C 5.80

施耐德电气SP5000系列硬件手册说明书

SP5000系列硬件手册SP5000-MM01-CS-PDF_J本文档中提供的信息包含有关此处所涉及产品之性能的一般说明和/或技术特性。

本文档并非用于 (也不代替) 确定这些产品对于特定用户应用场合的适用性或可靠性。

任何此类用户或设备集成商都有责任就相关特定应用场合或使用方面对产品执行适当且完整的风险分析、评估和测试。

Schneider Electric 或其任何附属机构或子公司 (以下简称Schneider Electric) 对于误用此处包含的信息而产生的后果概不负责。

如果您有关于改进或更正此出版物的任何建议、或者从中发现错误、请通知我们。

本手册可用于法律所界定的个人以及非商业用途。

在未获得施耐德电气书面授权的情况下，不得翻印传播本手册全部或部分相关内容、亦不可建立任何有关本手册或其内容的超文本链接。

施耐德电气不对个人和非商业机构进行非独占许可以外的授权或许可。

请遵照本手册或其内容原义并自负风险。

与此有关的所有其他权利均由施耐德电气保留。

在安装和使用本产品时、必须遵守国家、地区和当地的所有相关的安全法规。

出于安全方面的考虑和为了帮助确保符合归档的系统数据、只允许制造商对各个组件进行维修。

当设备用于具有技术安全要求的应用场合时、必须遵守有关的使用说明。

未能使用施耐德电气软件或认可的软件配合我们的硬件，则可能导致人身伤害、设备损坏或不正确的运行结果。

不遵守此信息可能导致人身伤害或设备损坏。

2SP5000 系列硬件手册目录安全信息. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7关于本书. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9第1章概述. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13型号配置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14型号. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15装箱物品 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16认证与标准. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18联邦通讯委员会射频干扰声明 - 适用于美国. . . . . . . . . . . . . . . . . . . . . 20危险位置安装 - 适用于美国和加拿大. . . . . . . . . . . . . . . . . . . . . . . . . . 21符合欧盟 (CE) 标准 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23KC 标志. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24无线 LAN 信息. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25第2章设备连接. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29系统设计 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30附件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32第3章部品标识及其功能. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 373.1主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38标准主机模块. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39增强型主机模块. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41开放型主机模块. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43LED 指示. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 453.2显示模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46精良显示 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47高级显示模块. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51LED 指示. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55第4章规格. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 574.1一般规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58规格电气 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59规格环境 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61结构规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 624.2功能规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65显示规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66存储器 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67时钟. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68触摸屏 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 694.3接口规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70接口规格 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71接口连接 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74用于 COM1/COM2 的串行接口 (RS-232C 和 RS-422/RS-485) . . . . . 77辅助输出/扬声器输出接口 (AUX). . . . . . . . . . . . . . . . . . . . . . . . . . . . 80DVI-D 输出接口. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 813第5章尺寸 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .835.1标准主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84SP-5B00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .845.2增强型主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85SP-5B10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .855.3开放型主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86SP-5B40/SP-5B41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .865.4精良显示模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87SP-5500TP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88SP-5600TP/SP-5660TP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89SP-5700TP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90SP-5700WC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91SP-5800WC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .925.5高级显示模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93SP-5400WA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94SP-5500WA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95SP-5600WA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96SP-5600TA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .975.6主机模块和显示模块 - 组合尺寸. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98SP-5500TP 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99SP-5600TP/SP-5660TP 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . .101SP-5700TP 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103SP-5700WC 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105SP-5800WC 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107SP-5400WA 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109SP-5500WA 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111SP-5600WA 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113SP-5600TA 带主机模块 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115第6章安装和接线. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1176.1安装 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118安装步骤. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1186.2接线规则. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130连接 DC 电源线 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131连接电源. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133接地 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1356.3USB 电缆紧固夹. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136A 型 USB 电缆夹 (1 个端口) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137USB 电缆夹 mini-B (1 个端口). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1396.4AUX 接头 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141简介 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1416.5SD 卡插入/拔出 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142简介 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143SD卡插入 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144SD卡移除 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145SD 卡备份 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 4SP5000 系列硬件手册6.6CFast 卡插入/移除 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147简介. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148CFast卡插入. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149CFast卡移除. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150CFast 卡数据备份. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1516.7USB 前盖. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152打开 USB 前盖. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1526.8隔离设备和 USB/RS-422/485 转换适配器. . . . . . . . . . . . . . . . . . . . . . 154简介. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155安装到主机模块. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156第7章维护. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159定期清洁 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160定期检查事项. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161更换防水橡皮垫圈 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162更换原电池. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163更换系统卡 (SD 卡). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166更换系统卡 (CFast 卡) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168更换背光灯. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170售后服务 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171567SP5000 系列硬件手册安全信息重要信息声明在试图安装、操作、维修或维护设备之前，请仔细阅读下述说明并通过查看来熟悉设备。

LD5535 规格书

recovery
4 Cycle
Latch
Int. OTP
Auto recovery
Auto recovery
Pin Descriptions
SOT-26 NAME
1
GND
2
COMP
3
OTP
4
CS
5
VCC
6
OUT
FUNCTION Ground Voltage feedback pin (same as the COMP pin in UC384X). Connect a photo-coupler to close the control loop and achieve the regulation. Pull this pin below 0.95V to shut down the controller into latch mode until the AC resumes power-on. Connecting this pin to ground with NTC will achieve OTP protection. Let this pin float or connect a 100k resistor to disable the latch protection. Current sense pin, connect it to sense the MOSFET current. Supply voltage pin Gate drive output to drive the external MOSFET
OVP PG
VBIAS
Protection
PG
OVP Comparator VCC-OVP
Driver Stage

ALPS电子产品说明书

VF401
—
—
—
—
—
—
—
—
—
—
4-Pin SIP (5,13 mm x 3,60 mm x 1,60 mm)
VM821Q1 —
—
—
—
—
—
—
—
—
—
2-Pin SIP, Wide (5,13 mm x 3,60 mm x 1,60 mm)
VM721V1 VM721D1
—
—
—
—
—
—
—
—
—
—
8-Pin SOIC (6,0 mm x 4,9 mm x 1,4 mm)
Magnetic Sensor IC Product Line Card
Package Style1, 2
SOT-23 (2,90 mm x 2,80 mm x 1,40 mm)
Flat T0-92-style
-LP
-T2
(4,06 mm x 3,0 mm x 1,57 mm)
Blank -L -S -SP
—
—
—
—
—
—
—
—
—
—
APS00B
U-Pack (4,52 mm x 4,52 mm x 1,57 mm)
-T2
-T3
-S Blank
—
—
—
—
—
—
2SS52M
—
—
—
—
1Measurements given do not include lead dimensions. 2Not all lead or packaging combinations are possible. Contact Honeywell Customer Service at 1-800-537-6945 for assistance.

IEEE标准电力系统暂态数据交换通用格式COMTRADE

IEEE标准电力系统暂态数据交换通用格式COMTRADE(2008-03-14 10:国内主要录波器数据的记录格式及IEEE的COMTRADE数据格式一、国内主要录波器数据的记录格式目前国内生产故障录波器的厂家多达20余家，而各种型号的录波器既没有统一的故障记录格式也不能完全满足电力部颁《220～550 kV电力系统故障动态记录技术准则》要求的录波器动态记录过程标准。

数据记录格式的不统一和不标准给事故后的故障分析和故障过程模拟再现带来了极大的不便。

GLQ2型和WGL-12型是国内采用最多的两种微机故障录波器型号。

GLQ2型录波器数据文件长度固定，录波时间为4.2 s，采样频率为800 Hz，可同时记录16个模拟通道和16个数字通道。

数据文件的前32个字节用于记录录波时间、启动方式、启动通道、装置配置信息、录波顺序号、通道电抗值等信息。

从数据文件的第33个字节开始存放各个通道的采样值，每个通道的采样点为3 360个。

WGL-12型录波器数据文件长度根据暂态故障时间的长短不同而有所不同，其最大录波时间为10 min，最多可记录48路模拟通道和72路数字通道。

采样频率依据系统是否已进入稳态而分为1 000 Hz和200 Hz。

为了节约内存，分A、B、C、D、E 5个时间段进行数据记录：A时段：系统大扰动开始前的状态数据，直接记录每周20点的采样值，记录时间小于0.04s。

B时段：系统大扰动后初期的状态数据，直接记录每周20点的采样值，记录时间不小于0.1s。

C时段：系统大扰动后的中期状态数据，每周记录4个值，记录时间不小于0.1 s。

D时段：系统动态过程状态数据，每5周记录第1周的4个值，记录时间不小于1.9 s。

E时段：系统稳态过程状态数据，每50周记录第1周的4个值，记录时间不小于10 min。

二、IEEE的COMTRADE数据格式（一）COMTRADE文件格式COMTRADE是IEEE标准电力系统暂态数据交换通用格式。