TC2117-3.3EB中文资料

合集下载

ABB AbilityTM EDCS Ekip E-Hub 产品介绍说明书

—I N FO M A R K E TI NG EL 2020-303Pasarela de conectividad Cloud para ABB Ability TM EDCS Ekip E-HubNos complace comunicar ellanzamiento de la nueva pasarela de comunicación Ekip E-Hub, que incluye la capacidad de digitalizar instalaciones nuevas o existentes e integrarlas en la solución ABB Ability TM EDCS o en sistemas digitales de terceros.FuncionalidadLa nueva pasarela Ekip E-Hub permite conectar instalaciones nuevas o existentes a la plataforma Cloud de gestión energética ABB ABility TM EDCS o a sistemas de control tipo SCADA o BMS, para optimizar sus costes operativos.Ekip E-Hub reconoce y conecta automáticamente con los dispositivos de ABB Electrification a través del puerto de conectividad Ethernet (protocolo Modbus TCP) y del puerto serie RS485 (protocoloModbus RTU). Adicionalmente, el módulo opcional de señales de entrada permite leer medidas de pulsos digitales o estados de la aparamenta (6 entradas digitales configurables) y señales analógicas (2 entradas 4…20mA y 2 entradas 0…36V).La conectividad aguas arriba, ya sea a la plataforma ABB Ablity TM o a un sistema de control tipo SCADA oBMS, se realiza mediante el puerto Ethernet.Módulos enchufables Ekip Com como alternativa Los módulos enchufables Ekip Com son unaalternativa en aquellos casos donde sea posible el uso de dispositivos como Emax 2, Tmax XT, Ekip UP o TruONE ATS. En este caso, Ekip Com Hub permite la conexión a ABB Ability TM EDCS y Ekip Com Modbus TCP (u otros módulos Ekip Com con protocolos de comunicación estándares) permite la conexión a sistemas de control tipo SCADA o BMS.Configuración y puesta en marchaLa herramienta de configuración de la nuevapasarela Ekip E-Hub es el software Ekip Connect, una herramienta gratuita de configuración, supervisión y diagnóstico para otras gamas de producto como Emax 2, Tmax XT, Ekip UP, M4M, TruONE ATS, etc.Ekip Connect reconoce automáticamente la pasarela Ekip E-Hub, conectando el PC al puerto Ethernet del dispositivo.Ekip Connect Ekip E-HubEn cuanto a dimensiones:Características técnicas Alimentación 9…36 V DCMontaje Carril DIN 35mm (DIN EN 60 715)IPIP40Temperatura de trabajo -20…+70ºCDimensiones 198,0 x 90,3 x 48,4 mm Norma IEC62368-1Antena 3G Opcional (necesarias 2uds)Memoria interna4GB eMMCConectividadPuertos y protocolos2x RJ45 Ethernet – Modbus TCP2x RS-485 - Modbus RTU 2x USB 2.02x MicroSIM – 3G (no suministrada)Módulo opcional E/S6x Entradas digitales 24 V DC 4x Entradas analógicasCaracterísticas principalesLas características técnicas principales de la nueva pasarela Ekip E-Hub son:—01Ejemplo conectividadcon los dispositivos deprotección, medida ygestión de la energía—01—(*) Únicamente se muestran los códigos incluidos en tarifa PDF 2020. Parael resto de códigos y precios consultar la tarifa electrónica o PDC.Códigos de pedido (*)Código pedido Descripción Precio unit. €GTV ABC Sum.mín./Embalaje Ud ConectividadI N F O M A R K E T I N G E L 2020-303Haga click en la imagen para acceder a la documentaciónHaga click en la imagen para acceder a la documentación—Manual técnico Ekip E-HubPresentación PDF de lanzamiento Ekip E-HubHaga click en la imagen para acceder a la webPágina web soluciones digitales de supervisión de la energíaHaga click en la imagen para acceder a la documentaciónManual usuario Ekip E-Hub Haga click en la imagen para acceder a la documentaciónFolleto ABB ABility TM EDCS—Pau MasgrauABB Ability™ Market Development ManagerAsea Brown Boveri, SA Low Voltage Products Tel.: 93 484 22 25Fax: 93 484 21 90www.abb.es/bajatension。

29400资料

PRELIMINARY
(February, 2001, Version 0.1)
1
AMIC Technology, Inc.
元器件交易Hale Waihona Puke
A29400 Series
The host system can detect whether a program or erase operation is complete by reading the I/O7 ( Data Polling) and I/O6 (toggle) status bits. After a program or erase cycle has been completed, the device is ready to read array data or accept another command. The sector erase architecture allows memory sectors to be erased and reprogrammed without affecting the data contents of other sectors. The A29400 is fully erased when shipped from the factory. The hardware sector protection feature disables operations for both program and erase in any combination of the sectors of memory. This can be achieved via programming equipment. The Erase Suspend feature enables the user to put erase on hold for any period of time to read data from, or program data to, any other sector that is not selected for erasure. True background erase can thus be achieved. Power consumption is greatly reduced when the device is placed in the standby mode. The hardware RESET pin terminates any operation in progress and resets the internal state machine to reading array data.

TC2117-2.5EDTR资料

TC2117Features•Fixed Output Voltages: 1.8V, 2.5V, 3.0V, 3.3V •Very Low Dropout Voltage•Rated 800mA Output Current•High Output Voltage Accuracy•Standard or Custom Output Voltages •Overcurrent and Overtemperature Protection •Space Saving SOT-223 PackageApplications•5V to 3.3V Linear Regulator•Portable Computers•Instrumentation•Battery Operated Systems•Linear Post-Regulator for SMPS•Core Voltage Supply for FPGAs, PLDs, CPUs, DSPsTypical Application General DescriptionThe TC2117 is a fixed, high accuracy (typically ±0.5%) CMOS low dropout regulator. Designed specifically for battery operated systems, the TC2117’s CMOS construction eliminates wasted ground current, significantly extending battery life. Total supply current is typically 80µA at full load (20 to 60 times lower than in bipolar regulators).TC2117 key features include ultra low noise, very low dropout voltage (typically 450mV at full load), and fast response to step changes in load. The TC2117 incorporates both overtemperature and overcurrent protection. The TC2117 is stable with an output capacitor of only 1µF and has a maximum output current of 800mA. This device is available in 3-Pin SOT-223, and 3-Pin DDPAK packages.Package TypesC11µF BatteryTC2117V IN V OUTC21µFGNDV OUT V INV INV OUTGNDGNDVOUTTabisVOUTFront ViewFront View112332Tab is V OUT3-Pin SOT-2233-Pin DDPAKTC2117TC2117800mA Fixed Low Dropout Positive Regulator© 2006 Microchip Technology Inc.DS21665C-page 1TC2117DS21665C-page 2© 2006 Microchip Technology Inc.1.0ELECTRICALCHARACTERISTICSAbsolute Maximum Ratings†Input Voltage.........................................................6.5V Output Voltage....................(V SS – 0.3) to (V IN + 0.3V)Power Dissipation................Internally Limited (Note 7)Maximum Voltage on Any Pin.........V IN +0.3V to -0.3V Operating Temperature...............-40°C < T J < +125°C Storage temperature ..........................-65°C to +150°C† Notice: Stresses above those listed under "Absolute Maxi-mum Ratings" may cause permanent damage to the device.These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied.Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability.DC CHARACTERISTICSElectrical Specifications: Unless otherwise indicated, V IN = V R + 1.5V, (Note 1), I L = 100µA, C L = 3.3µF, T A = +25°C. Boldface type specifications apply for junction temperatures of -40°C to +125°C.ParametersSym Min Typ Max Units ConditionsInput Operating Voltage V IN 2.7— 6.0V Note 2Maximum Output Current I OUTMAX 800——mA Output VoltageV OUT V R – 2.5%V R ± 0.5%V R + 2.5%VV R ≥ 2.5V V R – 2%V R ± 0.5%V R + 3%V R = 1.8V V OUT Temperature Coefficient ΔV OUT /ΔT —40—ppm/°C Note 3Line RegulationΔV OUT /ΔV IN —0.0070.35%(V R + 1V) ≤ V IN ≤ 6V Load Regulation (Note 4)ΔV OUT /V OUT -0.010.0020%/mA I L = 0.1mA to I OUTMAX Dropout Voltage (Note 5)V IN –V OUT—2030mV V R ≥ 2.5V, I L = 100µA —50160V R ≥ 2.5V, I L = 100mA —150480V R ≥ 2.5V, I L = 300mA —260800V R ≥ 2.5V, I L = 500mA —4501300V R ≥ 2.5V, I L = 800mA —10001200V R = 1.8V, I L = 500mA—12001400I L = 800mASupply CurrentI DD —80130µA SHDN = V IH , I L = 0Power Supply Rejection Ratio PSRR —55—db F ≤ 1kHz Output Short Circuit Current I OUTSC —1200—mA V OUT = 0V Thermal Regulation ΔV OUT /ΔP D—0.04—V/W Note 6Output Noise eN—300—nV/√HzI L = 100mA, F = 10kH ZNote 1:V R is the regulator output voltage setting.2:The minimum V IN has to justify the conditions: V IN ≥ V R + V DROPOUT and V IN ≥ 2.7V for I L = 0.1mA to I OUTMAX .3:4:Regulation is measured at a constant junction temperature using low duty cycle pulse testing. Load regulation is tested over a load range from 0.1mA to the maximum specified output current. Changes in output voltage due to heating effects are covered by the thermal regulation specification.5:Dropout voltage is defined as the input-to-output differential at which the output voltage drops 2% below its nominal value measured at a 1.5V differential.6:Thermal regulation is defined as the change in output voltage at a time T after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a current pulse equal to I LMAX at V IN = 6V for T = 10ms.7:The maximum allowable power dissipation is a function of ambient temperature, the maximum allowable junction tem-perature and the thermal resistance from junction-to-air (i.e., T A , T J , θJA ). Exceeding the maximum allowable power dis-sipation causes the device to initiate thermal shutdown. Please see Section 4.2 “Thermal Considerations” for more details.TCV OUTV OUTMAX V OUTMIN –()106–V OUT TΔ×-------------------------------------------------------------------------=TC2117TEMPERATURE CHARACTERISTICSElectrical Specifications: Unless otherwise indicated, V IN = V R + 1.5V, I L = 100µA, C L = 3.3µF, SHDN > V IH, T A = +25°C.Parameters Sym Min Typ Max Units Conditions Temperature RangesSpecified Temperature Range T A-40—+125°C(Note1)Operating Temperature Range T J-40—+125°CStorage Temperature Range T A-65—+150°CThermal Package ResistancesThermal Resistance, 3L-SOT-223θJA—59—°C/WThermal Resistance, 3L-DDPAKθJA—71—°C/WNote1:Operation in this range must not cause T J to exceed Maximum Junction Temperature (+125°C).© 2006 Microchip Technology Inc.DS21665C-page 3TC2117DS21665C-page 4© 2006 Microchip Technology Inc.2.0TYPICAL PERFORMANCE CURVESFIGURE 2-1:Line Regulation vs. Temperature.FIGURE 2-2:Output Noise vs. Frequency.FIGURE 2-3:Load Regulation vs.Temperature.FIGURE 2-4:I DD vs. Temperature.FIGURE 2-5:Dropout Voltage vs. I LOAD .FIGURE 2-6:3.0V V OUT vs.Temperature.Note:The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range.© 2006 Microchip Technology Inc.DS21665C-page 5TC2117Typical Performance Curves (Continued)FIGURE 2-7:Power Supply Rejection Ratio.FIGURE 2-8:Load Step Response.FIGURE 2-9:Line Step Response600mA/DIV50mV/DIVV IN =4.0V V OUT =3.0VC IN =1µF Ceramic C OUT =10µF TaV OUT50mV/DIVC OUT =10µF Tantalum (0.25Ω ESR)I OUT =300mA V IN =4.0V to 5.0VC IN =NATC2117DS21665C-page 6© 2006 Microchip Technology Inc.3.0PIN DESCRIPTIONSThe descriptions for the pins are listed in Table 3-1.TABLE 3-1:PIN FUNCTION TABLE3.1Ground (GND)Ground terminal.3.2Regulated Output Voltage (V OUT )Regulated voltage output.3.3Unregulated Supply (V IN )Unregulated supply inputPin No.(3-Pin SOT-223)(3-Pin DDPAK)Symbol Description1GND Ground Terminal.2V OUT Regulated output voltage.3V INUnregulated Supply input.TC21174.0DETAILED DESCRIPTIONThe TC2117 is a precision, positive output LDO. Unlike bipolar regulators, the TC2117 supply current does not increase proportionally with load current. In addition, V OUT remains stable and within regulation over the entire 0mA to 800mA operating load range. FIGURE 4-1:TYPICAL APPLICATIONCIRCUIT4.1Output CapacitorA 1µF (min) capacitor from V OUT to ground is required. The output capacitor should have an effective series resistance of 0.2Ω to 10Ω. A 1µF capacitor should be connected from V IN to GND if there is more than 10 inches of wire between the regulator and the AC filter capacitor, or if a battery is used as the power source. Aluminum electrolytic or tantalum capacitor types can be used. (Since many aluminum electrolytic capacitors freeze at approximately -30°C, solid tantalums are recommended for applications operating below -25°C.) When operating from sources other than batteries, supply noise rejection and transient response can be improved by increasing the value of the input and output capacitors and employing passive filtering techniques.4.2Thermal Considerations4.2.1THERMAL SHUTDOWNIntegrated thermal protection circuitry shuts the regula-tor off when die temperature exceeds 160°C. The regulator remains off until the die temperature drops to approximately 150°C.4.2.2POWER DISSIPATIONThe amount of power the regulator dissipates is prima-rily a function of input and output voltage, and output current. The following equation is used to calculate worst case actual power dissipation:EQUATION 4-1:The maximum allowable power dissipation (Equation4-2) is a function of the maximum ambient temperature (T AMAX), the maximum allowable die temperature (+125°C) and the thermal resistance from junction-to-air (θJA).EQUATION 4-2:Table4-1 shows various values of θJA for the TC2117 mounted on a 1/16 inch, 2-layer PCB with 1 oz. copper foil.TABLE 4-1:THERMAL RESISTANCEGUIDELINES FOR TC2117 IN3-PIN SOT-223 PACKAGEC11µF BatteryTC2117V IN V OUTC21µFGNDV OUTCopperArea(Topside)*CopperArea(Backside)Board AreaThermalResistance2500sq mm2500sq mm2500sq mm45°C/W1000sq mm2500sq mm2500sq mm45°C/W225sq mm2500sq mm2500sq mm53°C/W100sq mm2500sq mm2500sq mm59°C/W1000sq mm1000sq mm1000sq mm52°C/W1000sq mm0sq mm1000sq mm55°C/W*Tab of device attached to topside copper.Where:V INMAXV OUTMINI LOADMAXP D = Worst-case actual power dissipation= Minimum regulator output voltage= Maximum output (load) current= Maximum voltage on V INP D V INMAX V OUTMIN–()I LOADMAX=P DMAX= (T JMAX– T AMAX)θJAWhere all terms are previously defined.© 2006 Microchip Technology Inc.DS21665C-page 7TC2117DS21665C-page 8© 2006 Microchip Technology Inc.TABLE 4-2:THERMAL RESISTANCE GUIDELINES FOR TC2117 IN 3-PIN DDPAK PACKAGEEquation 4-1 can be used in conjunction with Equation 4-2 to ensure regulator thermal operation is within limits. For example:Find:1. Actual power dissipation2. Maximum allowable dissipationActual power dissipation:Maximum allowable power dissipation:In this example, the TC2117 dissipates a maximum of only 786mW; below the allowable limit of 1.186W. In a similar manner, Equation 4-1 and Equation 4-2 can be used to calculate maximum current and/or input volt-age limits.Copper Area (Topside)*Copper Area (Backside)Board Area Thermal Resistance(θJA )2500sq mm 2500sq mm 2500sq mm 25°C/W 1000sq mm 2500sq mm 2500sq mm 27°C/W 125sq mm2500sq mm2500sq mm35°C/W*Tab of device attached to topside copper.Given:V IN MAX =5.0V ±5%V OUT MIN = 3.3V ± 0.5%I LOADMAX =400mAT J MAX =125°CT A MAX =55°CθJA =59°C/W (SOT-223)P D ≈(V IN MAX – V OUT MIN )I LOAD MAX=[(5.0 x 1.05) – (3.3 x .995)] 400 x 10-3=786mWP D MAX=(T J MAX – T A MAX )θJA =(125 – 55) 59=1.186W© 2006 Microchip Technology Inc.DS21665C-page 9TC21175.0PACKAGING INFORMATION5.1Package Marking InformationXXXXXXXXX XXXXXXXXX YYWWNNN3-Lead DDPAKExample3-Lead SOT-223XXXXXXX XXXYYWWNNNExample2117-25VDB0643256TC2117DS21665C-page 10© 2006 Microchip Technology Inc.3-Lead Plastic (EB) (DDPAK)Note:For the most current package drawings, please see the Microchip Packaging Specification located at /packagingBOTTOM VIEWTOP VIEWc2L αφ(5X)L3§ Significant Characteristic Revised 07-19-05Notes:Mold Draft AngleDimensions D and E do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side.α7°PitchNumber of Pins Overall Width Standoff §Molded Package Length Exposed Pad Width Overall Height MAXUnitsDimension LimitsA1E1D E e A .000.256 REFINCHES *1.00 BSCMIN3NOMMAX.0100.00 6.50 REFMILLIMETERS.183MIN32.54 BSCNOM0.254.65JEDEC equivalent: TO-2524.50.170.0050.13Foot Length L .068--.110 1.73-- 2.79Foot Angle φ----8°b1.049.050.051 1.24 1.27 1.30.177* Controlling Parameter 4.32.385.398.4109.7810.1110.41Overall Length D1Upper Lead Width Lead Thickness c .014.020.0260.360.510.66Pad Thickness c2.045--.055 1.14-- 1.40Lower Lead Width .037b .026.0320.660.810.943°--8°7°3°------Exposed Pad Length D2.303 REF7.70 REFPad Length L3.045--.0671.701.14--.370.330.3509.408.388.89.577.549.60515.3713.9414.66BSC: Basic Dimension. Theoretically, exact value shown without tolerances.REF: Reference Dimension, usually without tolerance, for information purposes only.See ASME Y14.5MSee ASME Y14.5MDrawing No. C04-011© 2006 Microchip Technology Inc.DS21665C-page 11TC21173-Lead Plastic Small Outline Transistor (DB) (SOT-223)Note:For the most current package drawings, please see the Microchip Packaging Specification located at /packaging0.850.65.033.026b Lead Width 0.350.23.014.009c Lead Thickness 6.706.30.264.248D Overall Length 7.30.287E Overall Width1.80–.071–A Overall Height 4.60 BSC.181 BSCe1Outside lead pitch (basic) 2.30 BSC .091 BSC e PitchMAXMINMAXMINDimension LimitsMILLIMETERS *INCHES UnitsDimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .005" (0.127mm) per side.Notes:*Controlling Parameter Molded Package Width E1.130.146 3.30 3.70.264 6.70Tab Lead Width b2.114.124 2.90 3.15BSC: Basic Dimension. Theoretically exact value shown without tolerances.See ASME Y14.5MJEDEC Equivalent TO-261 AAFoot Length .035L 0.90–––.118.030.012.256.138–.276 3.00–0.300.76–3.506.507.00NOM NOM Lead AngleMold Draft Angle, Top Mold Draft Angle, Bottomφαβ–0.37–10°0°10°10°16°–10°16°–––10°16°10°16°Molded Package Height 1.651.55.063.065A2.061 1.60Standoff–.001A1.004–0.020.10Drawing No. C04-032Revised 09-13-05e1AA1A2αβφLbcTC2117NOTES:DS21665C-page 12© 2006 Microchip Technology Inc.TC2117 APPENDIX A:REVISION HISTORYRevision C (October 2006)•Section1.0 “Electrical Characteristics”:Changed dropout voltage voltage typical value forI L = 500mA from 700 to 1000 and maximumvalue from 1000 to 1200 for. Changed typicalvalue for I L = 800mA from 890 to 1200•Section5.0 “Packaging information”: Addedpackage marking information and package outlinedrawings•Added disclaimer to package outline drawings.•Added Appendix A Revision HistoryRevision B (May 2002)•Not DocumentedRevision A (May 2001)•Original Release of this Document.© 2006 Microchip Technology Inc.DS21665C-page 13TC2117NOTES:DS21665C-page 14© 2006 Microchip Technology Inc.© 2006 Microchip Technology Inc.DS21665C-page 15TC2117PRODUCT IDENTIFICATION SYSTEMTo order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office . DeviceTC2117Fixed Output CMOS LDO Positive Regulator Voltage Option:*1.8V = 1.8V2.5V = 2.5V3.0V = 3.0V 3.3V=3.3V* Other output voltages are available. Please contact your local Microchip sales office for details.PackageDB =Plastic (SOT-223), 3-lead DBTR =Plastic (SOT-223), 3-lead,Tape and ReelEB =Plastic Transistor Outline (DDPAK), 3-Lead EBTR =Plastic Transistor Outline (DDPAK), 3-Lead,Tape and ReelPART NO.X.XX XX PackageVoltage OptionDeviceExamples:a)TC2117-1.8VEBTR 1.8V LDO, DDPAK-3 pkg.,Tape and Reelb)TC2117-2.5VEBTR 2.5V LDO, DDPAK-3 pkg.,Tape and Reelc)TC2117-3.0VEBTR 3.0V LDO, DDPAK-3 pkg.,Tape and Reeld)TC2117-3.3VEBTR 3.3V LDO, DDPAK-3 pkg.,Tape and Reel a)TC2117-1.8VDB 1.8V LDO, SOT-223 pkg.b)TC2117-1.8VDBTR 1.8V LDO, SOT-223 pkg.,Tape and Reelc)TC2117-2.5VDB 2.5V LDO, SOT-223 pkg.d)TC2117-2.5VDBTR 2.5V LDO, SOT-223 pkg.,Tape and Reele)TC2117-3.0VDB 3.0V LDO, SOT-223 pkg.f)TC2117-3.0VDBTR 3.0V LDO, SOT-223 pkg.,Tape and Reelg)TC2117-3.3VDB 3.3V LDO, SOT-223 pkg.h)TC2117-3.3VDBTR 3.3V LDO, SOT-223 pkg.,Tape and ReelXX Tape and ReelTC2117NOTES:DS21665C-page 16© 2006 Microchip Technology Inc.Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.TrademarksThe Microchip name and logo, the Microchip logo, Accuron, dsPIC, K EE L OQ, micro ID, MPLAB, PIC, PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and SmartShunt are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A.Analog-for-the-Digital Age, Application Maestro, CodeGuard, dsPICDEM, , dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB,In-Circuit Serial Programming, ICSP, ICEPIC, Linear Active Thermistor, Mindi, MiWi, MPASM, MPLIB, MPLINK, PICkit, PICDEM, , PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.All other trademarks mentioned herein are property of their respective companies.© 2006, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.Printed on recycled paper.Note the following details of the code protection feature on Microchip devices:•Microchip products meet the specification contained in their particular Microchip Data Sheet.•Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.•There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.•Microchip is willing to work with the customer who is concerned about the integrity of their code.•Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.Microchip received ISO/TS-16949:2002 certification for its worldwideheadquarters, design and wafer fabrication facilities in Chandler andTempe, Arizona, Gresham, Oregon and Mountain View, California. TheCompany’s quality system processes and procedures are for its PIC®8-bit MCUs, K EE L OQ®code hopping devices, Serial EEPROMs,microperipherals, nonvolatile memory and analog products. In addition,Microchip’s quality system for the design and manufacture ofdevelopment systems is ISO 9001:2000 certified.© 2006 Microchip Technology Inc.DS21665C-page 17AMERICASCorporate Office2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200Fax: 480-792-7277 Technical Support: Web Address: AtlantaAlpharetta, GATel: 770-640-0034Fax: 770-640-0307BostonWestborough, MATel: 774-760-0087Fax: 774-760-0088 ChicagoItasca, ILTel: 630-285-0071Fax: 630-285-0075DallasAddison, TXTel: 972-818-7423Fax: 972-818-2924DetroitFarmington Hills, MITel: 248-538-2250Fax: 248-538-2260 KokomoKokomo, INTel: 765-864-8360Fax: 765-864-8387Los AngelesMission Viejo, CATel: 949-462-9523Fax: 949-462-9608Santa ClaraSanta Clara, CATel: 408-961-6444Fax: 408-961-6445 TorontoMississauga, Ontario, CanadaTel: 905-673-0699Fax: 905-673-6509ASIA/PACIFICAsia Pacific OfficeSuites 3707-14, 37th FloorTower 6, The GatewayHabour City, KowloonHong KongTel: 852-2401-1200Fax: 852-2401-3431Australia - SydneyTel: 61-2-9868-6733Fax: 61-2-9868-6755China - BeijingTel: 86-10-8528-2100Fax: 86-10-8528-2104China - ChengduTel: 86-28-8665-5511Fax: 86-28-8665-7889China - FuzhouTel: 86-591-8750-3506Fax: 86-591-8750-3521China - Hong Kong SARTel: 852-2401-1200Fax: 852-2401-3431China - QingdaoTel: 86-532-8502-7355Fax: 86-532-8502-7205China - ShanghaiTel: 86-21-5407-5533Fax: 86-21-5407-5066China - ShenyangTel: 86-24-2334-2829Fax: 86-24-2334-2393China - ShenzhenTel: 86-755-8203-2660Fax: 86-755-8203-1760China - ShundeT el: 86-757-2839-5507Fax: 86-757-2839-5571China - WuhanTel: 86-27-5980-5300Fax: 86-27-5980-5118China - XianTel: 86-29-8833-7250Fax: 86-29-8833-7256ASIA/PACIFICIndia - BangaloreTel: 91-80-4182-8400Fax: 91-80-4182-8422India - New DelhiTel: 91-11-4160-8631Fax: 91-11-4160-8632India - PuneTel: 91-20-2566-1512Fax: 91-20-2566-1513Japan - YokohamaTel: 81-45-471- 6166Fax: 81-45-471-6122Korea - GumiTel: 82-54-473-4301Fax: 82-54-473-4302Korea - SeoulTel: 82-2-554-7200Fax: 82-2-558-5932 or82-2-558-5934Malaysia - PenangTel: 60-4-646-8870Fax: 60-4-646-5086Philippines - ManilaTel: 63-2-634-9065Fax: 63-2-634-9069SingaporeTel: 65-6334-8870Fax: 65-6334-8850Taiwan - Hsin ChuTel: 886-3-572-9526Fax: 886-3-572-6459Taiwan - KaohsiungTel: 886-7-536-4818Fax: 886-7-536-4803Taiwan - TaipeiTel: 886-2-2500-6610Fax: 886-2-2508-0102Thailand - BangkokTel: 66-2-694-1351Fax: 66-2-694-1350EUROPEAustria - WelsTel: 43-7242-2244-39Fax: 43-7242-2244-393Denmark - CopenhagenTel: 45-4450-2828Fax: 45-4485-2829France - ParisTel: 33-1-69-53-63-20Fax: 33-1-69-30-90-79Germany - MunichTel: 49-89-627-144-0Fax: 49-89-627-144-44Italy - MilanTel: 39-0331-742611Fax: 39-0331-466781Netherlands - DrunenTel: 31-416-690399Fax: 31-416-690340Spain - MadridTel: 34-91-708-08-90Fax: 34-91-708-08-91UK - WokinghamTel: 44-118-921-5869Fax: 44-118-921-5820 W ORLDWIDE S ALES AND S ERVICE10/19/06DS21665C-page 18© 2006 Microchip Technology Inc.。

Amtech Tacky 助焊膏系列安全数据表说明书

Inventec Performance Chemicals USA, LLCSAFETY DATA SHEET (SDS)SECTION 1: PRODUCT AND COMPANY IDENTIFICATIONPRODUCT NAME: Amtech Tacky Paste Flux Series: 200, 400, 500, 600, 4000, SynTECH, WSFC-305L and #61 SYNONYMS:Tacky FluxMANUFACTURER: Inventec Performance Chemicals USA, LLCADDRESS:PO Box 989 Deep River, CT 06417 USAPHONE:860-526-8300FAX:860-526-8243EMERGENCY:Infotrac-(800)535-5035REVISION DATE:December 19, 2014REVISION DATE: 3DOCUMENT NAME:SDS-Tacky Flux-008PRODUCT USE:Bonding solder joints in production and repair of circuit boardsSECTION 2: HAZARDS IDENTIFICATIONCHEMICAL NAME:N/ACHEMICAL FAMILY:MixtureCHEMICAL FORMULA:N/AROUTES OF ENTRY: Inhalation, Ingestion, Skin/Eye ContactGHS:Signal Word: WarningHazard statement(s)H302 Harmful if swallowedH317 May cause an allergic skin reactionH320 Causes eye irritationH335 May cause respiratory irritationPrecautionary statement(s)P102 Keep out of reach of childrenP233 Keep container tightly closedP264 Wash hands thoroughly after handlingP270 Do not eat, drink or smoke when using this productP280 Wear protective gloves/protective clothing/eye protection/face protectionP302+P352 IF ON SKIN: Wash with plenty of soap and waterP305+P351 IF IN EYES: Rinse continuously with water for several minutesP404 Store in a closed containerP501 Dispose of contents/containers in accordance with Federal, State/Provincial, and/or local regulations POTENTIAL HEALTH EFFECTS:EYE CONTACT: May cause moderate irritation. Do not allow material to come in contact with eyes.SKIN CONTACT: May cause moderate skin irritation.INHALATION: May cause irritation to the respiratory tract.INGESTION: Harmful if swallowed. May cause irritation to the mouth, throat, and stomach. May cause abdominal discomfort, nausea, vomiting, and/or diarrhea.CHRONIC: Not established.SECTION 2 NOTES:Inventec Performance Chemicals USA, LLC does not recommend, manufacture, market, or endorse any of its products for human consumption.SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTSIngredient CAS Number Exposure LimitsModified Rosins N/A N/APine Oil Derivatives 8000-41-7 N/AProprietary Ingredients N/A N/AMixed Carboxylic Acids N/A N/ASECTION 3 NOTES:Percentages of individual components are not listed as this information is considered a trade secret.SECTION 4: FIRST AID MEASURESEYES: Flush with plenty of water, contact a physician. If contact lenses can be removed easily, flush eyes without contact lenses. SKIN: Wash affected area with plenty of warm, soapy water. If irritation persists, seek medical attention.INGESTION: Call a physician or Poison Control Center immediately. Do not induce vomiting.INHALATION: Remove to fresh air. If not breathing, seek immediate medical attention.SECTION 5: FIRE-FIGHTING MEASURESEXTINGUISHING MEDIA: Dry chemical, foamSPECIAL FIRE FIGHTING PROCEDURES: Do not use water. Use NIOSH-approved self-contained Breathing Apparatusand full protective clothing if involved in a fire.UNUSUAL FIRE AND EXPLOSION HAZARDS:This product does not present any unusual fire and explosion hazards. SECTION 6: ACCIDENTAL RELEASE MEASURESACCIDENTAL RELEASE MEASURES: If material spills or leaks, collect and place into a properly labeled waste container. Remove traces of tacky flux using cloth rags or paper towels moistened with Isopropyl Alcohol. Follow on-site personal protective equipment recommendations.SECTION 6 NOTES:See Sections 2, 4, and 7 for additional information.SECTION 7: HANDLING AND STORAGEHANDLING/STORAGE: Keep containers tightly closed when not in use. Use care to avoid spills. Avoid inhalation of fumes or dust. Avoid contact with eyes, skin, and clothing.OTHER PRECAUTIONS: Empty containers may retain product residues in vapor, liquid, and/or solid form. All labeled hazard precautions should be observed.WORK HYGIENIC PRACTICES: Cosmetics/Food/Drink/Tobacco should not be consumed or used in work areas. Always wash hands after handling material and before applying or using cosmetics/food/drink/tobacco.SECTION 7 NOTES:For industrial use only.SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTIONVENTILATION: Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLVs. RESPIRATORY PROTECTION: Use with adequate ventilation.EYE PROTECTION: Use with appropriate safety glasses.SKIN PROTECTION: Protective gloves and clothing should be worn when handling material. Wash hands thoroughly with soap and water upon leaving the work area.SECTION 9: PHYSICAL AND CHEMICAL PROPERTIESAPPEARANCE: Clear, White, or Yellow to Dark Amber gelODOR: Mild odorODOR THRESHOLD: Not establishedpH as SUPPLIED: N/ASECTION 9: PHYSICAL AND CHEMICAL PROPERTIES (continued)MELTING POINT: Not establishedFREEZING POINT: Not establishedINITIAL BOILING POINT: Not establishedBOILING RANGE: Not establishedFLASH POINT: Not establishedEVAPORATION RATE: Not establishedFLAMMABILITY (solid): Not establishedUPPER/LOWER FLAMMABILITY: Not establishedUPPER/LOWER EXPLOSIVE LIMITS:Not establishedVAPOR PRESSURE (mmHg): N/A (°F/°C)VAPOR DENSITY (AIR = 1): N/A (°F/°C)RELATIVE DENSITY: Not establishedSOLUBILITY IN WATER: PartiallyPARTITION COEFFICIENT (n-octanol/water): Not establishedAUTOIGNITION TEMPERATURE: Not establishedDECOMPOSITION TEMPERATURE: Not establishedVISCOSITY: N/A (°F/°C)SECTION 10: STABILITY AND REACTIVITYSTABILITY: StableCONDITIONS TO AVOID (STABILITY): Freezing temperatures. High temperatures. INCOMPATIBILITY (MATERIAL TO AVOID): Strong oxidizing materialsHAZARDOUS DECOMPOSITION/BY-PRODUCTS: Harmful organic fumes and toxic oxide fumes may form at elevatedtemperatures.POSSIBILITY OF HAZARDOUS REACTIONS: Will not occurSECTION 11: TOXICOLOGICAL INFORMATIONACUTE TOXICITY: Not availableSKIN CORRISION/IRRITATION: Not establishedSERIOUS EYE DAMAGE/IRRITATION: Not availableRESPIRATORY OR SKIN SENSITIZATION: Not establishedGERM CELL MUTAGENICITY: Not availableCARCINOGENICITY: Not availableREPRODUCTIVE TOXICITY: Not availableSTOT-SINGLE EXPOSURE: Not availableSTOT-REPEATED EXPOSURE: Not availableASPIRATION HAZARD: Not availableSECTION 12: ECOLOGICAL INFORMATIONTOXICITY: Product not testedPERSISTENCE AND DEGRADIBILITY: Product not testedBIOACCUMULATIVE POTENTIAL: Product not testedMOBILITY IN SOIL: Product not testedOTHER ADVERSE EFFECTS: Product not testedSECTION 13: DISPOSAL CONSIDERATIONSWASTE DISPOSAL METHOD: Scrap and waste solder should be stored in a dry, sealed container for later disposal. Disposal must be in accordance with Federal, State/Provincial, and Local Regulations.SECTION 14: TRANSPORT INFORMATIONTransport in accordance with applicable regulations and requirements.UN Number: Not availableUN Proper Shipping Name: Not availablePackaging Group:Not applicableEnvironmental Hazards:NoneTRANSPORT HAZARD CLASSES:US DOT Hazardous Material Classification: Tacky Flux is not listed as a DOT hazardous materialWater Transportation: Tacky Flux is not listed as a hazardous materialIATA Hazardous Material Classification: Tacky Flux is not listed as IATA hazardous materialSECTION 15: REGULATORY INFORMATIONAll ingredients used to manufacture this product are listed on the EPA TSCA Inventory.U.S. FEDERAL REGULATIONS: Not regulatedSTATE REGULATIONS: Not regulatedINTERNATIONAL REGULATIONS: Not regulatedSECTION 16: OTHER INFORMATIONHMIS Rating: Health=1 Flammability=1 Physical Hazard=0 Personal Protection=X KEY:N/A: Not applicableGHS: Global Harmonized SystemOSHA: Occupational Safety and Health AdministrationACGIH: American Conference of Governmental Industrial HygienistsNTP: National Toxicology ProgramIARC: International Agency for Research on CancerCAS: Chemical Abstract ServiceNIOSH: National Institute for Occupational Safety & HealthSTOT: Specific target organ toxicityTLV: Threshold limit valueUS DOT: United States Department of TransportationDOT: Department of TransportationIATA: International Air Transport AssociationEPA:Environmental Protection AgencyTSCA:Toxic Substance Control ActHMIS:Hazardous Material Identification SystemPREPARATION INFORMATION:This update supersedes all previously released documents.PREPARED BY: Wendy W. GesickAPPROVED BY: Leigh W. GesickDISCLAIMER:The information contained herein is based on data considered to be accurate but does not purport to be all-inclusive and shall be used only as a guide. No warranty is expressed or implied regarding the accuracy of this data and Inventec Performance Chemicals USA, LLC shall not be held liable for any damage resulting from any handling or contact with the above product. Liability is expressly disclaimed for loss or injury arising out of use of this information or the use of any materials designated. This material is not for resale, unauthorized distribution, or personal use.。

物料清单(品名为英文)

機種名稱：機種名稱：SWV7051 客戶機種名：客戶機種名：S70EBS70EB- SH18P69A
階層料號 1 2 2 2 2 2 2 2 2 2 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 DC.45N01H001 42.45N01H001 75.45N03H001 75.45N04H001 75.45N05H001 75.45N06H001 75.45N01H001 75.45N02H001 33.45N01H001 70.45N01H001 30.45N01H001 32.45N01H001 32.45N02H001 51.4K009H001 51.4K010H001 75.45N07H001 75.45N08H001 75.45N09H001 75.45N10H001 42.45N02H001 52.4K001.001 52.45N01H001 52.45N02H001 52.45N03H001 52.45N04H001 52.45N05H001 52.45N06H001 52.4K010.001 52.45N07H001 52.45N08H001 52.45N09H001 52.4K022.001
成品料號：成品料號：95.45N01H001 客戶料號：客戶料號：02.06.01.0331
名稱用量 1 2 1 1 1 1 1 16 1 1 1 1 1 7 7 1 1 1 1 1 1
D.C. LCD BACKLIGHT-SWV7051 FFC CABLE (得潤 UL20861 80PIN*135mm 深圳得潤)-SWV7051 PL CASE ASS'Y LEFT (CHILM FG-0205B BLACK 宏旌光電 1# )-SWV7051 PL CASE ASS'Y RIGHT (CHILM FG-0205B BLACK 宏旌光電 1# )-SWV7051 PL CASE ASS'Y UPPER (CHILM FG-0205B BLACK 宏旌光電 1# )-SWV7051 PL CASE ASS'Y LOWER (CHILM FG-0205B BLACK 宏旌光電 1# )-SWV7051 BACK COVER ASS'Y (SECC T=1.0mm 東莞特迪 1#)-SWV7051 LED LIGHT BAR ASS'Y (3528 FR4 鴻利光電)-SWV7051 REFLECTOR SHEET (RA225 1612*927.6*0.225mm 東莞宏邦)-SWV7051 0 1575.6*891.2*2mm GZB)-SWV7051 DIFFUSER PLATE 原材(領航 LHDCCSH200-G170 1585*900*2mm 成都領航)-SWV7051(需要修改料號描述） PRISM SHEET UPPER (LGE SOS-S10L 0度 1575.6*890.1*0.28mm 廣州揚旭)-SWV7051 DIFFUSER SHEET UPPER (東旭成188BDN 1575.6*890.1*0.208mm 廣州揚旭)-SWV7051 SUPPORT PIN A（DOW SUPPORT PIN B（DOW XQ83619 WHITE 深圳精研)-SWV6541Y XQ83619 WHITE 深圳精研)-SWV6541Y （共用視睿65）（共用視睿65）

赛米控丹佛斯 SEMITRANS 全碳化硅功率模块 SKM260MB170SCH17 数据表

© by SEMIKRONRev. 1.0–04.11.20201SEMITRANS ®3SiC MOSFET ModuleSKM260MB170SCH17Features*•Full Silicon Carbide (SiC) power module•High reliability 2nd Generation SiC MOSFETs•Optimized for fast switching and lowest power losses•External SiC Schottky Barrier Diode embedded•Insulated copper baseplate using DBC technology (Direct Bonded Copper)•Improved thermal performances with Aluminum Nitride (AlN) substrate •UL recognized, file no. E63532Typical Applications•High frequency power supplies •AC inverters •Traction APU •EV Chargers•Industrial Test SystemsRemarks•Case temperature limited to T C = 125°C max.•Recommended T jop = -40 ... +150°C •Gate-Source SURGE VOLTAGE(t surge <300ns), V GS_surge = -10V ... +26VAbsolute Maximum Ratings SymbolConditions Values UnitMOSFET V DSS T j =25°C 1700VI D T j =175°CT c =25°C 378 A T c =80°C301 A I DMPW ≤ 10µs, Duty cycle ≤ 1%980A I DM,repetitive790A V GS -6...22V T j-40 (175)°CAbsolute Maximum Ratings SymbolConditionsValuesUnitInverse diodeV RRM T j =25°C 1700V I F T j =175°CT c =25°C 552A T c =80°C428A I Fnom 300A I FRM 900A I FSM t p =10ms, sin 180°, T j =150°C, including body diode2030A T j-40 (175)°CAbsolute Maximum Ratings SymbolConditions Values UnitModule I t(RMS)500A T stg module without TIM -40...125°C V isolAC sinus 50 Hz, t =1min4000V2Rev. 1.0–04.11.2020© by SEMIKRONSEMITRANS ®3SiC MOSFET ModuleSKM260MB170SCH17Features*•Full Silicon Carbide (SiC) power module•High reliability 2nd Generation SiC MOSFETs•Optimized for fast switching and lowest power losses•External SiC Schottky Barrier Diode embedded•Insulated copper baseplate using DBC technology (Direct Bonded Copper)•Improved thermal performances with Aluminum Nitride (AlN) substrate •UL recognized, file no. E63532Typical Applications•High frequency power supplies •AC inverters •Traction APU •EV Chargers•Industrial Test SystemsRemarks•Case temperature limited to T C = 125°C max.•Recommended T jop = -40 ... +150°C •Gate-Source SURGE VOLTAGE(t surge <300ns), V GS_surge = -10V ... +26VMOSFET V (BR)DSS V GS =0V,I D =1mA, T j =25°C 1700V V GS(th)V DS =V GS , I D =57.75mA1.62.84V I DSS V GS =0V,V DS =1700V, T j =25°C 1.8mA I GSS V GS =22V,V DS =0V 700nA R DS(on)V GS =18V I D =161AchiplevelT j =25°C 8.110m ΩT j =150°C 14m ΩC iss V GS =0V V DS =800Vf =1MHzT j =25°C 27nF C oss T j =25°C 0.88nF C rss T j =25°C0.105nF R Gint T j =25°C2.1ΩQ G V DD =1000V, V GS =-5 ... 20V, I D =300A 1470nC t d(on)V DD =900V I D =300A V GS =-5 / +20VR Gon =0.7ΩR Goff =0.7Ωdi/dt on =12kA/µs di/dt off =9.5kA/µsdv/dt off =22kV/µs T j =150°C 64ns t r T j =150°C 60ns t d(off)T j =150°C162ns t f T j =150°C 32ns E on T j =150°C 7.59mJ E off T j =150°C6.21mJ R th(j-c)per MOSFET0.065K/W R th(c-s)per MOSFET (λgrease =0.81 W/(m*K))0.03K/WCharacteristics SymbolConditionsmin.typ.max.UnitInverse diodeV F = V SD I F =300A chiplevel T j =25°C 1.65 1.95V T j =150°C 2.51 2.86V V F0chiplevel T j =25°C 1.00 1.10V T j =150°C 0.860.96V r F chiplevelT j =25°C2.2 2.8m ΩT j =150°C5.56.3m ΩC j parallel to C oss , f =1MHz, V R =1700V, T j =25°C1.026nF Q c V R =800V, di/dt off =500A/µs, T j =25°C 0.95µCR th(j-c)per diode0.056K/W R th(c-s)per diode (λgrease =0.81 W/(m*K))0.027K/W© by SEMIKRONRev. 1.0–04.11.20203SEMITRANS ®3SiC MOSFET ModuleSKM260MB170SCH17Features*•Full Silicon Carbide (SiC) power module•High reliability 2nd Generation SiC MOSFETs•Optimized for fast switching and lowest power losses•External SiC Schottky Barrier Diode embedded•Insulated copper baseplate using DBC technology (Direct Bonded Copper)•Improved thermal performances with Aluminum Nitride (AlN) substrate •UL recognized, file no. E63532Typical Applications•High frequency power supplies •AC inverters •Traction APU •EV Chargers•Industrial Test SystemsRemarks•Case temperature limited to T C = 125°C max.•Recommended T jop = -40 ... +150°C •Gate-Source SURGE VOLTAGE(t surge <300ns), V GS_surge = -10V ... +26VModule L DS 15nH R DD'+SS'measured per switchT C =25°C0.55m ΩT C =125°C0.85m ΩR th(c-s)1calculated without thermal coupling (λgrease =0.81 W/(m*K))0.008K/W R th(c-s)2including thermal coupling, T s underneath module (λgrease =0.81 W/(m*K))0.013K/W M s to heat sink M635Nm M tto terminals M62.55Nm Nmw325g4Rev. 1.0–04.11.2020© by SEMIKRON© by SEMIKRON Rev. 1.0–04.11.202056Rev. 1.0–04.11.2020© by SEMIKRON© by SEMIKRON Rev. 1.0–04.11.20207This is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340.*IMPORTANT INFORMATION AND WARNINGSThe specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.8。

黑金刚

高信形状
品
薄型化
波化
命
赖性
工作上限温度· 标准寿命（ｈｏｕｒｓ）
额定电压范围（Ｖｄｃ）
１０５℃超小型化品８５℃小型化品１０５℃小型化品８５℃小型化标准品１０５℃小型化标准品１０５℃小型化标准品８５℃标准品（１６０Ｖｄｃ以上请参照Ｎｏ５８５公报）１０５℃标准品（１６０Ｖｄｃ以上请参照Ｎｏ５８５公报）８５℃高１５ｍｍ薄型品１０５℃高１５ｍｍ薄型品小型化长寿命品１０５℃小型化长寿命品小型化长寿命品长寿命品对应异常电压·小型化高纹波品对应异常电压·小型化品伺服·变频器用充放电对应品（详情请参照Ｎｏ７８１公报）８５℃标准品１０５℃标准品８５℃变频器高纹波小型化品变频器用高纹波品变频器用高耐压小型化品变频器用高耐压品变频器用高纹波品变频器用长寿命品椭圆形状·变频器用高纹波品１０５℃高耐压·变频器用长寿命品１０５℃变频器用高纹波长寿命品伺服·变频器用充放电对应品（详情请参照Ｎｏ７８２公报）
铝电解电容器
产品指南
接前页
标准
小型 ·
低
长寿
高信形状
品
薄型化
Ｚ化命
赖性
工作上限温度· 标准寿命（ｈｏｕｒｓ）
额定电压范围（Ｖｄｃ）
０４１０５℃
３，０００６．３～５０
０４１２５℃ ３，０００／５，０００２５～５０
０４１２５℃ ２，０００～５，０００１０～４５０
０４１２５℃
５，０００１０～５０
０４１０５℃
５，０００
２５、３５
０４１０５℃
２，０００６．３～１６
０４

PT7C4337WE中文资料

Crystal: 32.768kHz
Source
External input
1
Oscillator
Oscillator enable/disable
Oscillator fail detect
2
Time
Time display
12-hour 24-hour
Century bit
3
Alarm interrupt
Real-time Clock Module (I2C Bus)
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Overview of Functions .................................................................................................................................................................. 5 Registers......................................................................................................................................................................................... 6

TRACOPOWER全系列产品手册

3W
4.5-9, 9-18,
9-18,18-36, 36-75
18-36, 36-75
3.3, 5, 12, 15,
3.3, 5, 12,
±5, ±12, ±15
±12, ±15
±0.5 %
±0.3 %
±0.75 %
±1.0 %
50 mVpp
50 mVpp
1500
1500
-25 to+75°C
-40 to +71°C
ＤＣ／ＤＣ电源模块
ＴＭＡ、ＴＭＥ、ＴＭＲ系列
ＴＳＭ、ＴＥＳ系列
ＤＣ／ＤＣ模块１到２Ｗ，ＳＩＰ和ＳＭＤ封装
• 单路和双路输出
• 满载时效率为８１％
• 工业标准脚位
Series Output Power Input Voltages (VDC) Output Voltages (VDC)
Regulation: -Line -Load max.
MHV 2W 12 (±10 %) 180, 350, 500, 1000, 1500, 2000 ± 0.03 % ± 0.08 % 0.05 %/8 h 30 mVpp -10 to +75 °C 80/110 x 12 x 19.8
PHV 5W 12 (±10 %) 350, 500, 1000, 2000 ±0.01 % ±0.1 % 0.05 %/8 h 100 mVpp -10 to +75 °C 60 x 40 x 15/20
ＤＣ／ＤＣ大功率模块，６０Ｗ到２２ｋＷ
• 工业专用
• 输入电压可达８００ＶＤＣ
• 多标准可用选项
• 标准输出电压可达８００ＶＤＣ
Series Output Power Input Voltage Ranges (VDC) Output Voltages (VDC) Output Currents up to Regulation: -Line max.

物质安全数据表(MSDS)-次甲基蓝

急性毒性：LD50：1180mg/kg(大鼠经口)
LC50：无资料
刺激性：无资料
其他：无
第十二部分：生态学资料
生态毒性：无
生物降解性：无
非生物降解性：无
生物富集或生物积累性：无
其他有害作用：无资料
第十三部分：废弃处置
废弃物性质：无
废弃处置方法：无资料
废弃注意事项：无
第十四部分：运输信息
危险货物编号：无资料
第十六部分：其他信息
参考文献：GB 16483-2000《化学品安全技术说明书填写指南》
《危险化学品安全技术全书》
修改说明：若发现新的危害性，在有关信息发布半年内，须对此说明书的内容进行修订。
其他信息：无
环境危害：对环境有危害，对水体和大气可造成污染。
燃爆危险：非常易燃。
第四部分：急救措施
皮肤接触：无资料
眼睛接触：无资料
吸入：迅速脱离现场至空气新鲜处。保持呼吸道通畅。如呼吸困难，给输氧。如呼吸停止，立即进行人工呼吸。就医。
食入：用水漱口，给饮牛奶或蛋清。就医。
第五部分：消防措施
危险特性：无资料
有害燃烧产物：无资料
第一部分：化学品及企业标识
化学品中文名：次甲基蓝
化学品英文名：Methylene blue
分子式或其简写：C16H18ClN3S.3H2O
第二部分：成分/组成信息
■纯品□混合物
有害物成分
浓度
CAS No.
次甲基蓝
7220-79-3
第三部分：危险性概述
危险性类别：无资料
侵入途径：吸入、食入、经皮吸收
健康危害：对眼睛、呼吸道和皮肤有刺激作用。
饱和蒸气压(KPa)：无资料

HSC277中文资料

HSC277Silicon Epitaxial Planar Diode for UHF/VHF tuner Band SwitchADE-208-413 (Z)Rev. 0Dec. 1995 Features• Low forward resistance. (r f = 0.7max)• U l tra small F l at P a ckage (UFP) is suitable for surface mount design.Ordering InformationType No.Cathode Mark Package CodeHSC277Laser UFPOutlineAbsolute Maximum Ratings (Ta = 25°C)Item Symbol Value Unit35VReverse voltage VRJunction temperature Tj125°CPower dissipation Pd150mWOperation temperature Topr–20 to +60°CStorage temperature Tstg–45 to +125°CHSC2772Electrical Characteristics (Ta = 25°C)ItemSymbol Min Typ Max Unit Test Condition Reverse voltage V R 35——V I R = 10µA Reverse current I R ——50µA V R = 25V Forward voltage V F —— 1.0V I F = 10mA Capacitance C —— 1.2pF V R = 6V, f = 1MHz Forward resistancer f——0.7ΩI F = 2mA, f = 100MHzFig.1 Forward current Vs. Forward voltageHSC277Fig.2 Reverse current Vs. Reverse voltageFig.3 Capacitance Vs. Reverse voltage3HSC277Fig.4 Forward resistance Vs. Forward current 4HSC277 Package Dimensions5Cautions1.Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent,copyright, trademark, or other intellectual property rights for information contained in this document.Hitachi bears no responsibility for problems that may arise with third party’s rights, includingintellectual property rights, in connection with use of the information contained in this document.2.Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use.3.Hitachi makes every attempt to ensure that its products are of high quality and reliability. However,contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation,traffic, safety equipment or medical equipment for life support.4.Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installationconditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail-safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product.5.This product is not designed to be radiation resistant.6.No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi.7.Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products.Hitachi, Ltd.Semiconductor & Integrated Circuits.Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.Hitachi Asia Pte. Ltd.16 Collyer Quay #20-00Hitachi TowerSingapore 049318Tel: 535-2100Fax: 535-1533URLNorthAmerica : http:/Europe : /hel/ecg Asia (Singapore): .sg/grp3/sicd/index.htm Asia (Taiwan): /E/Product/SICD_Frame.htm Asia (HongKong): /eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htmHitachi Asia Ltd.Taipei Branch Office3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105)Tel: <886> (2) 2718-3666Fax: <886> (2) 2718-8180Hitachi Asia (Hong Kong) Ltd.Group III (Electronic Components)7/F., North Tower, World Finance Centre,Harbour City, Canton Road, Tsim Sha Tsui,Kowloon, Hong Kong Tel: <852> (2) 735 9218Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd.Electronic Components Group.Whitebrook ParkLower Cookham Road MaidenheadBerkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000Fax: <44> (1628) 778322Hitachi Europe GmbHElectronic components Group Dornacher Stra§e 3D-85622 Feldkirchen, Munich GermanyTel: <49> (89) 9 9180-0Fax: <49> (89) 9 29 30 00Hitachi Semiconductor (America) Inc.179 East Tasman Drive,San Jose,CA 95134 Tel: <1> (408) 433-1990Fax: <1>(408) 433-0223For further information write to:。

IR2117S中文资料

FeaturesData Sheet No. PD60146 Rev NSINGLE CHANNEL DRIVERProduct SummaryIR2117(S)/IR2118(S) & (PbF) 1IR2117(S)/IR2118(S) & (PbF)2Absolute Maximum RatingsAbsolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage param-eters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured Note 1: Logic operational for V S of -5 to +600V. Logic state held for V S of -5V to -V BS . (Please refer to the Design Tip DT97-3 for more details).IR2117(S)/IR2118(S) & (PbF)3Dynamic Electrical CharacteristicsV BIAS (V CC , V BS ) = 15V, C L = 1000 pF and T A = 25°C unless otherwise specified. The dynamic electrical characteristics are measured using the test circuit shown in Figure 3.Static Electrical CharacteristicsV BIAS (V CC , V BS ) = 15V and T A = 25°C unless otherwise specified. The V IN , V TH and I IN parameters are referenced to COM. The V O and I O parameters are referenced to COM and are applicable to the respective output leads: HO or LO.IR2117(S)/IR2118(S) & (PbF) 4Functional Block Diagram (IR2118)IR2117(S)/IR2118(S) & (PbF)5SymbolDescriptionV CC Logic and gate drive supplyINLogic input for gate driver output (HO), in phase with HO (IR2117)IN Logic input for gate driver output (HO), out of phase with HO (IR2118)COM Logic groundV B High side floating supply HO High side gate drive output V SHigh side floating supply returnLead Assignments8 Lead PDIP 8 Lead SOICIR2118IR2118S12348765V CC IN COMV B HO VS12348765V CC IN COMV B HO V S8 Lead PDIP 8 Lead SOICIR2117IR2117S12348765V CC IN COMV B HO V S12348765V CC IN COMV B HO V SIR2117(S)/IR2118(S) & (PbF)6IR2117/IR2118Figure 2. Floating Supply Voltage Transient Test CircuitIN(IR2117)HOIN(IR2118)IR2117/IR2118<50 V/nsIR2117(S)/IR2118(S) & (PbF)7IR2117(S)/IR2118(S) & (PbF)8IR2117(S)/IR2118(S) & (PbF)9IR2117(S)/IR2118(S) & (PbF)10IR2117(S)/IR2118(S) & (PbF)11(A (A V S ()V S ()IR2117(S)/IR2118(S) & (PbF)12(A ()()()IR2117(S)/IR2118(S) & (PbF)13()t ()() ()IR2117(S)/IR2118(S) & (PbF)14() ()V S ()()IR2117(S)/IR2118(S) & (PbF)15t ()t ()IR2117(S)/IR2118(S) & (PbF)1602550751001251501E+21E+31E+41E+51E+6Frequency (Hz)J u n c t i o n T e m p e r a t u r e (°C )320V140V10V2550751001251501E+21E+31E+41E+51E+6Frequency (Hz)J u n c t i o n T e m p e r a t u r e (°C )320V 140V10V02550751001251501E+21E+31E+41E+51E+6Frequency (Hz)J u n c t i o n T e m p e r a t u r e (°C )320V 140V 10V2550751001251501E+21E+31E+41E+51E+6Frequency (Hz)J u n c t i o n T e m p e r a t u r e (°C )320V 140V10VCase outlinesIR2117(S)/IR2118(S) & (PbF)18Per SCOP 200-002IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105This product has been qualified per industrial levelData and specifications subject to change without notice. 4/2/2004。

1729173资料

Extract from the onlinecatalogMKDSN 1,5/ 7-5,08Order No.: 1729173The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1729173Printed circuit terminal block, nominal current: 13.5 A, rated voltage: 250 V, pitch: 5.08 mm, no. of positions: 7, mounting: Soldering, type of connection: Screw connection, connection direction from the conductor to the PCB: 0°http://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmDimension a30.48 mmNumber of positions7Pin dimensions0,5 x 1 mm Hole diameter 1.3 mm Screw thread M 3 Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2)400 V Rated voltage (II/2)630 V Connection in acc. with standard EN-VDE Nominal current I N13.5 A Nominal voltage U N250 V Nominal cross section 1.5 mm2 Maximum load current13.5 A Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A1 Stripping length 6 mmConnection dataConductor cross section solid min.0.14 mm2 Conductor cross section solid max. 1.5 mm2 Conductor cross section stranded min.0.14 mm2 Conductor cross section stranded max. 1.5 mm2 Conductor cross section stranded, with ferrule0.25 mm2 without plastic sleeve min.Conductor cross section stranded, with ferrule1.5 mm2 without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2 with plastic sleeve min.Conductor cross section stranded, with ferrule1.5 mm2 with plastic sleeve max.Conductor cross section AWG/kcmil min.26 Conductor cross section AWG/kcmil max162 conductors with same cross section, solid min.0.14 mm22 conductors with same cross section, solid max.0.75 mm22 conductors with same cross section, stranded0.14 mm2min.2 conductors with same cross section, stranded0.75 mm2max.2 conductors with same cross section, stranded,0.25 mm2ferrules without plastic sleeve, min.2 conductors with same cross section, stranded,0.5 mm2ferrules without plastic sleeve, max.2 conductors with same cross section, stranded,0.5 mm2TWIN ferrules with plastic sleeve, min.2 conductors with same cross section, stranded,1 mm2TWIN ferrules with plastic sleeve, max.Certificates / ApprovalsCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil28-14CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-14ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-14Certification CB, CCA, CSA, CUL, GL, GOST, SEV, ULAccessoriesItem Designation DescriptionMarking1051993B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocks0805085SK 5,08/3,8:SO Marker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 12 identical marker strips per card, max.25-position labeling per strip, color: white0805412SK 5,08/3,8:UNBEDRUCKT Marker cards, unprinted, with pitch divisions, self-adhesive, 10-section marker strips, 12 strips per card, can be labeled with theM-PENTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalDrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

KOBE STEEL, LTD. 氧化物焊接用途DW-308LP产品安全数据表说明书

SAFETY DATA SHEETTrade designationDW-308LPRecommended useFor weldingRestrictions on useDo not use except for welding.ManufacturerManufacturer's Name: KOBE STEEL, LTD.Address: 5-9-12 Kitashinagawa Shinagawa-Ku Tokyo JAPANPhone number: +81-3-5739-6331Fax number: +81-3-5739-6960Emergency phone number:+81-3-5739-6331DistributorDistributor's Name: KOBELCO WELDING OF AMERICA INC.Address: 4755 Alpine Rd. Ste 250 Stafford, TexasPhone number: 281-240-5600Fax number: 281-240-5625Emergency phone number:281-240-5600Classification according to OSHA Hazard Communication Standard (29 CFR 1910.1200) and the Canadian Controlled Products Regulations.Hazard classificationClassification not possible as hazardous according to GHS classification.Label elementsSymbol: Not applicableSignal word: Not applicableHazard statement: Not applicablePrecautionary statement: Not applicableOther hazards which do not classified in GHS classificationGeneral: When this product is used in a welding process the hazards are electric shock,fumes, gases, radiation, spatter, slag and heat. Read and understand this SafetyData Sheets and the manufacturer’s instructions and the precautionary labelsbefore using this product.Shock: Electrical Shock can kill.Radiation: Arc rays can injure eyes and burn skin.Fumes: Overexposure to welding fumes result in symptoms like dizziness, nausea, drynessor irritation of the nose, throat or eyes. Chronic overexposure to welding fumesmay affect respiratory system and nervous system.Substance(s) formed under the conditions of useThe welding fumes produced from this welding electrode may contain the listedconstituent(s) of Sec.3 and/or their complex metallic oxides as well as solidparticles or other constituents from the consumables, base metal, or base metalcoating not listed Sec.3. The welding fumes may contain Mn, Ni, Cr(VI) andtheir compounds. Refer to Sec.8 and 10.Gases: Gases may cause gas poisoning. Under conditions of use, gases may containcarbon oxides, nitrogen oxides, ozone etc. Refer to Sec.8 and 10.Spatter, slag: Spatter, slag can damage eyes.Heat: Spatter, slag, melting metal, hot welds, arc rays and sparks can cause burn injuriesand ignite combustibles and flammable materialsSubstance/MixtureMixtureChemical name CAS No. Concentration range (%)IronChromiumTitanium dioxide NickelManganeseZirconium oxide Silicon dioxide Aluminum oxide TitaniumSiliconPotassium silicofluoride Potassium oxide Sodium fluoride7439-89-67440-47-313463-67-77440-02-07439-96-51314-23-47631-86-91344-28-17440-32-67440-21-316871-90-212136-45-77681-49-4Balance13-235-135-13＜3＜3＜3＜3＜1＜1＜1＜1＜1Description of first aid measuresInhalation: Remove person to fresh air and keep comfortable for breathing and get medical advice/attention. If breathing has stopped, perform artificial respiration and get immediatemedical advice/attention.Skin contact: Take off contaminated clothing and rinse skin with soap and water [or shower]. If skin irritation occurs, get medical advice/attention. For reddened or blistered skin, or thermal burns,get medical advice/attention.Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention.Arc rays can injure eyes. If exposed to arc rays, move victim to dark room, remove contactlenses as necessary for treatment, cover eyes with a padded dressing and rest. If symptomspersist, get medical advice/attention.Electric shock: Disconnect and turn off power. If the victim is semi- or unconscious, open the airway. If the victim cannot breath, give artificial respiration. If there is no pulse, massage the chest andapply artificial respiration.Ingestion: Unlikely due to form of product, except for granular materials. If ingested, Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor.Most important symptoms/effects, acute and delayedSymptoms: Short-term (acute) overexposure to welding fumes may result in discomfort such as metal fume fever, dizziness, nausea, or dryness or irritation of nose, throat, or eyes. May aggravatepre-existing respiratory problems (e.g. asthma, emphysema).Long-term (chronic) overexposure to welding fumes can lead to siderosis (iron deposits inlung), central nervous system effects, bronchitis and other pulmonary effects. Refer to Section11 for more information.Hazards: Welding hazards are complex and may include physical and health hazards such as but not limited to electric shock, physical strains, radiation burns (eye flash), thermal burns due to hotmetal or spatter and potential health effects of overexposure to welding fume or dust. Refer toSection 11 for more information.Indication of immediate medical attention and special treatment needed TreatmentTreat Symptomatically.General fire hazardsAs shipped, this product is nonflammable. However, welding arc and sparks can ignite combustibles and flammable products. Read and understand American National Standard Z49.1, "Safety In Welding, Cutting andAllied Processes” before using this product.Suitable (and unsuitable) extinguishing mediaSuitable extinguishing media: As shipped, the product will not burn. In case of fire in the surroundings,use CO2, powder or water spray.Unsuitable extinguishing media: None knownSpecific hazards arising from the chemicalNone knownSpecial protective equipment and precautions for fire-fightersSpecial protective equipment: Selection of respiratory protection for fire-fighting: follow the general fireprecautions indicated in the workplace. Self-contained breathing apparatusand full protective clothing must be worn in case of fire.Special precautions: Use standard firefighting procedures and consider the hazards of otherinvolved materials.GeneralUnlikely due to form of product, except for granular materials. The welding fumes and slags may be released. Personal precautions, protective equipment and emergency proceduresIf airborne dust and/or fume is present, use adequate engineering controls and, if needed, personal protection to prevent overexposure. Refer to recommendations in Section 8.Methods and material for containment and cleaning upClean up spills immediately, observing precautions in the personal protective equipment in Section 8. Avoid generating dust. Prevent product from entering any drains, sewers or water sources. Refer to Section 13 for proper disposal.Environmental precautionsAvoid release to the environment. Prevent further leakage or spillage if safe to do so.Precautions for safe handlingReduction of fumes and dusts: Keep formation of airborne dusts to a minimum. Provide appropriateexhaust ventilation at places were dust is formed. Read and understandthe manufacturer's instruction and the precautionary label on the product.See American National Standard Z49.1, "Safety In Welding, Cutting andAllied Processes"Prevention of electric shock: Do not touch live electrical parts such as the welding wire and weldingmachine terminals. Wear insulated gloves and safety boots. If weldingmust be performed in damp locations or with wet clothing, on metalstructures or when in cramped positions such as sitting , kneeling orlying, or if there is a high risk of unavoidable or accidental contact withworkpiece, use the following equipment: Semiautomatic DC Welder, DCManual (Stick) Welder, or AC Welder with Reduced V oltage Control. Prevention of fire and explosion: Remove flammable and combustible materials and liquids.Prevention of harm when handling welding consumables: Handle with care to avoid stings and cuts. Hold the welding wire manually when loosening the wire.Conditions for safe storage, including any incompatibilitiesStore welding consumables inside a room without humidity. Do not store welding consumables directly on the ground or beside a wall. Keep welding consumables away from chemical substances like acids which could cause chemical reactions. Store in accordance with local/regional/national regulations.Control parametersFor substances may be included in welding fumes, gases and flux, occupational exposure values are shown in Annex. Keep exposure below exposure limits.Threshold Limit Values (TLVs) and Biological Exposure Indices (BEIs) are values published by the American Conference of Government Industrial Hygienists (ACGIH). ACGIH Statement of Positions Regarding the TLVs and BEIs states that the TLV-TWA should be used as a guide in the control of health hazards and should not be used to indicate a fine line between safe and dangerous exposures. See Section 10 for information on potential fume constituents of health interest.Appropriate engineering controlsVentilation: Use enough ventilation, local exhaust at the arc, or both to keep the fumes and gasesbelow the exposure limits in the worker's breathing zone and the general area. Keepexposure as low as possible.Determine the composition and quantity of fumes and gases to which workers areexposed by taking an air sample from inside the welder's helmet if worn or in theworker's breathing zone. Improve ventilation if exposures are not below limits. SeeANSI/AWS F1.1, F1.2, F1.3 and F1.5, available from the American WeldingSociety, .Individual protection measuresEye protection: Wear helmet or use face shield with filter lens. As a rule of thumb, start with a shadewhich is too dark to see the weld zone. Then go to the next lighter shade which givessufficient view of the weld zone. Provide protective screens and flash goggles, ifnecessary, to shield others.Hand protection: Wear protective gloves. Suitable gloves can be recommended by the glove supplier. Protective Clothing: Wear hand, head, and body protection which help to prevent injury from radiation,sparks and electrical shock. See Z49.1. At a minimum this includes welder's glovesand a protective face shield, and may include arm protectors, aprons, hats, shoulderprotection, as well as dark substantial clothing. Wear dry gloves free of holes or splitseams. Train the welder not to permit electrically live parts or electrodes to contactskin or clothing or gloves if they are wet. Insulate yourself from the work piece andground using dry plywood, rubber mats or other dry insulation.Respiratory protection: Keep your head out of fumes. Use enough ventilation and local exhaust to keepfumes and gases from your breathing zone and the general area. Use respirable fumerespirator or air supplied respirator when welding in confined space or where localexhaust or ventilation does not keep exposure below exposure limits.Ear protection: Wear earplugs or earmuffs when using engine driven arc welding machine or pulsedarc welding machine that generates high-levelnoise.Hygiene measures: Do not eat, drink or smoke when using the product. Always observe good personalhygiene measures, such as washing after handling the material and before eating,drinking, and/or smoking. Routinely wash work clothing and protective equipmentto remove contaminants.Physical state: SolidColor: Silver or CopperOdor: OdorlessOdor threshold: No further relevant information availablepH: Not applicableMelting point/freezing point: No further relevant information availableInitial boiling point and boiling range: No further relevant information availableFlash point: Not applicableEvaporation rate: Not applicableFlammability: No further relevant information availableUpper/lower flammability or explosive limits: No further relevant information availableVapor pressure: Not applicableVapor density: Not applicableSolubility(ies) No further relevant information availablePartition coefficient (n-octanol/water): No further relevant information availableAuto-ignition temperature: No further relevant information availableDecomposition temperature: No further relevant information availableViscosity: Not applicableReactivityNon-reactive under normal conditions of storage and transport.Chemical stabilityStable under normal conditions of storage and transport.Possibility of hazardous reactionsContact with acids, alkalis and oxidizing agents could cause reaction and generation of gas.Conditions to avoidAvoid heat or contamination of acids, alkalis and oxidizing agents.Incompatible materialsAvoid contact with acids, alkalis and oxidizing agents.Hazardous decomposition productsWelding fumes and gases are generated as byproducts during the welding. The composition and quantity of fumes and gases cannot be recognized simply. The composition and quantity of the fumes and gases are dependent upon the base metal being welded (included coating such as solvent, paint, plating), the welding process, welding procedure, welding parameter and electrodes used. Other conditions which also influence the quantity of the fumes and gases to which workers may be exposed include the number of welding spots, the volume of the worker area, the quality and amount of ventilation, the position of the welder's head with respect to the fume plume, as well as the presence of contaminants in the atmosphere (such as chlorinated hydrocarbon vapors from cleaning and degreasing activities.)The fumes and gases are different in percent and form from the ingredients listed in Section 3. The fumes and gases include those originating from the volatilization, reaction, or oxidation of the materials shown in Section 3, plus those from the base metal and coating, etc., as noted above. Reasonably expected fume constituents produced during arc welding include the oxides of iron, manganese and other metals present in the welding consumable or base metal. And, it is known that these metal oxides are complex oxides, not single compounds. Hexavalent chromium compounds may be in the welding fume of consumables or base metals which contain chromium. Nickel compounds may be in the welding fume of consumables or base metals which contain Nickel. Gaseous and particulate fluoride may be in the welding fume of consumables which contain fluoride. Gaseous reaction products may include carbon monoxide and carbon dioxide. Ozone and nitrogen oxides may be formed by the radiation from the arc.GeneralClassification not possible as product. Refer to Sec.2. Inhalation of welding fumes and gases can be dangerous to your health. The composition and quantity of both are dependent upon the material being worked, the process, procedures, and consumables used. Refer to Sec.10.Acute toxicityShort-term (acute) overexposure to welding fumes may result in discomfort such as metal fume fever, dizziness, nausea, or dryness or irritation of nose, throat, or eyes. May aggravate pre-existing respiratory problems (e.g. asthma, emphysema).Cr:The presence of chromium/chromate in welding fumes can cause irritation of nasal membranes and skin.Ni:The presence of nickel compounds in fume can cause metallic taste, nausea, tightness of chest, fever.F:Exposure to the fluoride ion in welding fumes may cause hypocalcemia-calcium deficiency in the blood that can result in muscle cramps and inflammation and necrosis of mucous membranes.Gases:Some toxic gases associated with welding may cause pulmonary edema, asphyxiation, and death. Chronic toxicityLong-term (chronic) overexposure to welding fumes can lead to siderosis (iron deposits in lung), central nervous system effects, bronchitis, pneumoconiosis and other pulmonary effects. The severity of the change is proportional to the length of the exposure. The changes may be caused by non-work factors such as smoking, etc. Ni:Long term overexposure to nickel fumes may also cause pulmonary fibrosis and edema.Cr:Chromates may cause ulceration, perforation of the nasal septum, and severe irritation of the bronchial tubes and lungs. Liver damage have also been reported. Chromates contain the hexavalent form ofchromium.Mn:Overexposure to manganese compounds may affect the central nervous system, symptoms of which are languor, sleepiness, muscular weakness, emotional disturbances and spastic gait. The effect ofmanganese on the nervous system is irreversible.Cu:Overexposure to copper fumes may lead to copper poisoning, resulting in hermolytic anemia and liver, kidney and spleen damage.Fe:Inhalation of too much iron oxide fume over a long time can cause siderosis, sometimes called “iron pigmentation” of the lung, which can be seen on a chest x-ray but causes little or no disability. Chronicoverexposure to iron (>50-100mg Fe per day) can result in pathological deposition of iron in bodytissues, symptoms of which are fibrosis of the pancreas, diabetes mellitus, and liver cirrhosis.SiO2:Respiratory exposure to the crystalline silica present in this welding electrode is not anticipated during normal use. Respiratory overexposure to airborne crystalline silica is known to cause silicosis, a formof disabling pulmonary fibrosis which can be progressive and may lead to death.F:Chronic fluoride absorption can result in osseous fluorosis, increased radiographic density of the bones and mottling of the teeth.CarcinogenicityWelding fumes (not otherwise specified) are possibly carcinogenic to humans.Welding fumes is on the IARC lists as posing a cancer risk.SiO2:Crystalline silica is on the IARC (International Agency for Research on Cancer) and NTP (National Toxicology Program) lists as posing a cancer risk to humans.Ni:Nickel and its compounds are on the IARC and NTP lists as posing respiratory cancer risk.Cr:Hexavalent chromium and its compounds are on the IARC and NTP lists as posing a cancer risk to humans.Skin cancer has been reported.Arcrays:Respiratory or Skin SensitizationNi:Nickel and its compounds are skin sensitizers with symptoms ranging from slight itch to severe dermatitis.Cr: Chromates may cause allergic reactions, including skin rash. Asthma has been reported in some sensitized individuals. Skin contact may result in irritation, ulceration, sensitization, and contactdermatitis.OthersOrganic polymers may be used in the manufacture of various welding consumables. Overexposure to their decomposition byproducts may result in a condition known as polymer fume fever. Polymer fume fever usually occurs within 4 to 8 hours of exposure with the presentation of flu like symptoms, including mild pulmonary irritation with or without an increase in body temperature. Signs of exposure can include an increase in white blood cell count. Resolution of symptoms typically occurs quickly, usually not lasting longer than 48 hours.EcotoxicityProduct: No further relevant information availablePersistence and degradabilityProduct: No further relevant information availableBioaccumulative potentialProduct: No further relevant information availableMobility in soilProduct: No further relevant information availableThe generation of waste should be avoided or minimized whenever possible. When practical, recycle in an environmentally acceptable, regulatory compliant manner. Dispose of non-recyclable products in accordance with all applicable National, State, and Local requirements. Discharge, treatment, or disposal may be subject to National, State, or Local laws.UN number: Not applicableUN proper shipping name: Not applicable Transport hazard class(es): Not applicablePacking group: Not applicable Environmental hazards: Not applicable Transport in bulk (according to Annex II of MARPOL73/78 and the IBC Code): Not applicableSpecial precautions for user: Not applicableRegulations of each country are applied to subustance/mixures.ReferenceAmerican National Standard (ANSI) Z49.1 “Safety in Welding, Cutting, and Allied Processes”Date of issue2015-05-20DisclaimerThe information given in this SDS is based on the present level of our knowledge and experience. This information is believed to be accurate as of the revision date shown above. However, no warranty, expressed or implied, is given. Because the conditions or methods of use are beyond KOBE STEEL, LTD.’s control, we assume no liability resulting from the use of this product. Regulatory requirements are subject to change and may differ between various locations. Compliance with all applicable Federal, State, Provincial, and local laws and regulations remain the responsibility of the user. If necessary, consult an industrial hygienist or other expert to understand this information and safeguard the environment and protect workers from potential hazards associated with the handling or use of this product.。

88761 Electronic, 2 C #22 Str TC, FEP Ins, OS, FEP

22 AWG (7x30) TC
Outer Jacket
Material
Nom. Thickness Nom. Diameter
FEP - Fluorinated Ethylene Propylene 0.014 in (0.36 mm) 0.116 in (2.95 mm)
Overall Cable Diameter (Nominal):
Temperature
UL Temperature Operating
150°C
-20°C to +150°C
Bend Radius Stationary Min. Installation Min. 1.2 in (30 mm) 1.2 in (30 mm)
Max. Pull Tension: Bulk Cable Weight:
History
Update and Revision:
Revision Number: 0.535 Revision Date: 01-20-2023
Part Numbers
Variants
Item #
Color Putup Type Length
UPC
Footnote
88761 002100 Red Reel
Max. Current
Pair(s) 18.2 Ohm/1000ft
35 pF/ft (110 pF/m)
67 pF/ft (220 pF/m)
42 Ohm
9 Amps per Conductor at 30ºC
Voltage UL Voltage Rating 300 V (CMP)
Mechanical Characteristics

赛米控丹佛斯 SEMITRANS IGBT模块 SKM75GB17E4 数据表

®2IGBT4 ModulesSKM75GB17E4Features•IGBT4 = 4. generation medium fast trench IGBT (Infineon)•CAL4 = Soft switching 4. Generation CAL-Diode•Insulated copper baseplate using DBC Technology (Direct Copper Bonding) •With integrated Gate resistor•For switching frequenzies up to 8kHz •UL recognized, file no. E63532Typical Applications*•AC inverter drives •UPS•Electronic welders •Wind power •Public transportRemarks•Case temperature limited to T c = 125°C max.•Recommended T op = -40 ... +150°C •Product reliability results valid for T j = 150°CAbsolute Maximum Ratings SymbolConditions Values UnitIGBT V CES T j =25°C 1700V I C T j =175°CT c =25°C 125A T c =80°C97A I Cnom 75A I CRMI CRM = 3xI Cnom 225A V GES -20...20V t psc V CC =1000V V GE ≤ 15V V CES ≤ 1700VT j =150°C10µs T j-40 (175)°C Inverse diode I F T j =175°CT c =25°C 88A T c =80°C 65A I Fnom75A I FRM I FRM = 2xI Fnom150A I FSM t p =10ms, sin 180°, T j =25°C510A T j -40...175°C Module I t(RMS)200A T stg -40 (125)°C V isolAC sinus 50 Hz, t =1min4000VCharacteristics SymbolConditions min.typ.max.UnitIGBT V CE(sat)I C =75A V GE =15V chiplevel T j =25°C 1.93 2.18V T j =150°C 2.28 2.60V V CE0chiplevel T j =25°C 0.80.9V T j =150°C 0.70.8V r CE V GE =15V chiplevelT j =25°C 1517m ΩT j =150°C2124m ΩV GE(th)V GE =V CE , I C =3mA 5.25.86.4V I CES V GE =0V V CE =1700V T j =25°C 1mA T j =150°C mA C ies V CE =25V V GE =0Vf =1MHz 6.8nF C oes f =1MHz 0.28nF C res f =1MHz0.22nF Q G V GE =- 8 V...+ 15 V 600nC R Gint T j =25°C 8.5Ωt d(on)V CC =1200V I C =75AV GE =+15/-15V R G on =2ΩR G off =2Ωdi/dt on =2680A/µs di/dt off =2480A/µs du/dt =5440V/µs T j =150°C 187ns t r T j =150°C 29ns E on T j =150°C 30mJ t d(off)T j =150°C 603ns t f T j =150°C 140ns E off T j =150°C 29mJ R th(j-c)per IGBT0.304K/WCharacteristics SymbolConditionsmin.typ.max.UnitInverse diodeV F = V EC I F =75AV GE =0V chiplevelT j =25°C 2.00 2.40V T j =150°C 2.14 2.56V V F0chiplevel T j =25°C 1.32 1.56V T j =150°C 1.08 1.22V r FchiplevelT j =25°C 9.111m ΩT j =150°C1418m ΩI RRM I F =75A di/dt off =2860A/µs V GE =-15VV CC =1200VT j =150°C 95A Q rr T j=150°C27µC E rr T j =150°C 21mJR th(j-c)per diode0.632K/W Module L CE 30nH R CC'+EE'terminal-chip T C =25°C 0.65m ΩT C =125°C1.09m ΩR th(c-s)per module 0.040.05K/W M s to heat sink M635Nm M t to terminals M52.55Nm Nm w160g® 2IGBT4 ModulesSKM75GB17E4Features•IGBT4 = 4. generation medium fast trench IGBT (Infineon)•CAL4 = Soft switching 4. Generation CAL-Diode•Insulated copper baseplate using DBC Technology (Direct Copper Bonding) •With integrated Gate resistor•For switching frequenzies up to 8kHz •UL recognized, file no. E63532Typical Applications*•AC inverter drives •UPS•Electronic welders •Wind power •Public transportRemarks•Case temperature limited to T c = 125°C max.•Recommended T op = -40 ... +150°C •Product reliability results valid for T j = 150°CThis is an electrostatic discharge sensitive device (ESDS), international standard IEC 60747-1, Chapter IX* The specifications of our components may not be considered as an assurance of component characteristics. Components have to be tested for the respective application. Adjustments may be necessary. The use of SEMIKRON products in life support appliances and systems is subject to prior specification and written approval by SEMIKRON. We therefore strongly recommend prior consultation of our staff.。

1123721-1中文资料

AMP Economy Power (EP)Wire-to-Board Connector System1Product Factss.156 [3.96] and .312 [7.92]centerlines Wire-to-board connectors comprised of plug housings,receptacle contacts for discrete wire, and mating post headerss Hooded contact designed to accept wire with insulation diameters up to .118 [3.00]s Positive locking feature built into header back wall s Locking mechanism on connector housing maximizes retentions Number of positions: 1 to 11for .156 [3.96] centerline; 2to 5 for .312 [7.92]centerlines Vertical, through-hole headerss Positive latch design for easier mating and unmating s Polarization tabs help prevent post misalignment and mismatings Low-profile mating height of .641 [16.3] for 2 to 11positionss Vertical headers are end-to-end stackable to conserve PCB spaces Header packaging: bulk pack and tube loadeds Plug housings and post headers intermateable with JST VH connectors s Recognized under the Component Program of Underwriters Laboratories Inc.,File No. E28476s Certified by the Canadian Standards Association,File No. LR7189AMP Economy Power (EP)Connectors are designed for secondary power circuit applications. They consist of wire-to-pc board plug housings (for receptacle contacts) and mating post headers. Two contact centerline spacings are available: .156 [3.96] and .312 [7.92].During mating, the positive locking lever on the outside of the plug housingengages the mating header housing to provide for greater retention. This helps maintain reliable connections, when other non-locking type connec-tors could vibrate apart.This same locking lever must be depressed to unmate the connectors. The locking mechanism is also located high enough to help avoid interference with pc board clear plasticcoating (potting), which is a common treatment for many home appliances.Headers with .156 [3.96]centerline are offered in 2through 11 positions; .312[7.92] centerline are avail-able in 2 through 5 posi-tions. Both versions are provided in bulk pack or in tubes for automatic machines.The slim, vertical, postheaders are stackable end-to-end for greater flexibility when designing pc board configurations.The mating height of alow-profile plug and vertical header is .642 [16.3]; even the 1-position high-profile style measures only .732[18.6] above the pc pact dimensions like these are well suited for most applications in con-fined spaces.Technical DocumentsProduct Specification 108-5609Application Specification 114-5253© 2003 by Tyco ElectronicsCorporation. All Rights Reserved.AMP, AMP-O-LECTRIC and TYCO are trademarks.Other products, logos, and company names mentioned herein may betrademarks of their respective owners.Performance CharacteristicsVoltage Rating – 250 VACCurrent Rating – 7.5 amp max. (2 to 11 pos.), 8 amp max. (1 pos.)Low Level Overall Resistance –Initial — 10 m Ωmax.Final — 20 m Ωmax.Dielectric Withstanding Voltage –1.5 kV AC, 1 min.Insulation Resistance – Initial — 1000 M Ωmin.Final — 500 M Ωmin.Durability – 50 mating and unmating cyclesOperating Temperature – -13˚F to +221˚F [-25°C to +105°C]Wire Size Range – 18-22 AWG [0.89-0.30 mm 2]Insulation Diameter – .118 [3.00]max.ApplicationssHousehold appliances,garage door openers, power supplies, power connections, or other areas requiring additional connector retentionContacts and Plug Housings, Low-ProfileCrimp, Snap-inReceptacle ContactsMaterial and FinishSee chart.Related Product DataPlug Housings—Pages 2 and 4:2Plug HousingsMaterial and FinishHousing —UL 94V-0 rated nylon, natural colorNote: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details.Related Product DataContacts —see aboveMating Post Headers —Page 3PositionsANumber 2.310[ 7.86]1-1123722-23.465 [11.82]1-1123722-34.621 [15.78]1-1123722-45.777 [19.74]1-1123722-56.933[23.70]1-1123722-67 1.089[27.66]1-1123722-78 1.245[31.62]1-1123722-89 1.401[35.58]1-1123722-910 1.557[39.54]1-1123722-011 1.713 [43.50]1-1123722-1Applicator Part NumberWire Size WireMaterial Part AMPOMATORCLS AMP-O-LECTRIC Terminator Range Insulation and Number IV+ Lead Maker Model K Model G AWG mm 2Diameter Finish(Strip Form)Base Part No.Part No.Part No.3565001-471273-3354500-118-220.89-0.30.067-.118Phos. Brz.,1123721-11385286-11385286-21385286-31.70-3.00Pre-Tin Brass,1123721-2Pre-TinVertical Post Headers, Low-Profile.156 [3.96] CenterlineMaterial and FinishHousing —UL 94V-0 rated nylon, natural colorNote: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details.Post —Tin-plated brassRelated Product DataMating Plug Housings —Page 2.312 [7.92] CenterlineMaterial and FinishHousing —UL 94V-0 rated nylon, natural colorNote: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details.Post —Tin-plated brassRelated Product DataMating Plug Housings —Page 23Number of DimensionPart NumberPositionsABulk Pack Tube Loaded (Pcs. per Tube)2.310[ 7.86]1-1123723-21-1318300-2 (61)3.465 [11.82]1-1123723-31-1318300-3 (40)4.621 [15.78]1-1123723-41-1318300-4 (30)5.777 [19.74]1-1123723-51-1318300-5 (24)6.933[23.70]1-1123723-61-1318300-6 (20)7 1.089[27.66]1-1123723-71-1318300-7 (17)8 1.245[31.62]1-1123723-81-1318300-8 (15)9 1.401[35.58]1-1123723-91-1318300-9 (13)10 1.557[39.54]1-1123723-01-1318300-0 (12)111.713 [43.50]1-1123723-11-1318300-1 (11)Part NumberPositionsA Bulk Pack Tube Loaded (Pcs. per Tube)2.465 [11.82]1-1123724-21-1318301-2 (40)3.777 [19.74]1-1123724-31-1318301-3 (24)4 1.089 [27.66]1-1123724-41-1318301-4 (17)5 1.401[35.58]1-1123724-51-1318301-5 (13)Mating Height(Low Profile)Plug Housing and Post Header, High Profile1 Position Plug HousingPart Number 1-1123823-1Material and FinishHousing—UL 94V-0 rated nylon,natural colorNote: Alternate colors available uponrequest. Minimums may apply. Pleasecontact product engineer or productmanager for details.Related Product DataContacts—Page 2Mating Post Header—See below41 Position Post Header, VerticalPart Numbers1-1123824-1 (Bulk Pack)1-1318831-1 (Tube Loaded, 55 pcs. per Tube)Material and Finish Housing—UL 94V-0 rated nylon, natural colorNote: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details.Post—Tin-plated brassRelated Product DataMating Plug Housing—See aboveMating Height(High Profile)。

赛米控丹佛斯 SEMIPACK 晶闸管二极管模块 SKKH 107 16 E 数据表

Rev. 3.0–31.05.20221®1SKKHThyristor / Diode ModulesSKKH 107/16 E Features*•Heat transfer through aluminium oxide ceramic insulated metal baseplate •UL recognized, file no. E63532Typical Applications•Rectifier for motor drives •Process control•Rectifier for power suppliesAbsolute Maximum Ratings SymbolConditions Values UnitChip I T(AV)sin. 180°T j =130°C T c =85°C 119A T c =100°C 91A I TSM 10ms T j =25°C 2250A T j =130°C 1900A i 2t10ms T j =25°C 25313A²s T j =130°C18050A²s V RSM T j =25°C 1700V V RRM T j =25°C 1600V V DRM T j =25°C 1600V (di/dt)cr T j =130°C 140A/µs (dv/dt)cr T j =130°C1000V/µs T j -40...130°C Module T stg -40 (125)°C V isola.c.; 50 Hz; r.m.s.1min 3000V 1s3600VCharacteristics SymbolConditions min.typ.max.UnitChip V T T j =25°C,I T =300A 1.6 1.75V V T(TO)T j =130°C 0.80.90V r T T j =130°C2.803.35m ΩI DD ;I RD T j =130°C,V DD = V DRM ; V RD = V RRM 20mA t gd T j =25°C,I G =1A, di G /dt =1A/µs 1µs t gr V D = 0.67 * V DRM 2µs t q T j =130°C 200µs I H T j =25°C150250mA I L T j =25°C,R G =33Ω300600mA V GT T j =25°C,d.c. 2.5V I GT T j =25°C,d.c.100mA V GD T j =130°C, d.c.0.25V I GD T j =130°C, d.c.4mA R th(j-c)continuous DC per chip 0.15K/W per module 0.075K/W R th(j-c)sin. 180°per chip 0.2K/W per module 0.1K/W R th(j-c)rec. 120°per chip 0.21K/W per module0.105K/WModule R th(c-s)chip 0.09K/W module 0.05K/W M s to heatsink M5 4.25 5.75Nm M t to terminals M52.553.45Nm a 5 * 9.81m/s²w75g2Rev. 3.0–31.05.2022© by SEMIKRON© by SEMIKRON Rev. 3.0–31.05.202234Rev. 3.0–31.05.2022© by SEMIKRONThis is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340.*IMPORTANT INFORMATION AND WARNINGSThe specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected inSKKHtypical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.5。

台达 H4系列通用数控系统说明书

1.3 主要内容系统的安装与接线系统与 PLC 的接口介绍 MCM 机械参数的设定操作与编程诊断和报警系统应用实例和技巧说明 HCON，PLC，LCD，开发软件介绍
中达电通 CNC-H4 通用数控系统应用技术手册
1-3
1 序言
1.4 总目录
章节 1 标题序言手册适用范围功能与特性主要内容总目录安全的使用系统的安装控制器电柜设计的考虑事项 CNC H4 5.7 寸通用系列安装尺寸 5.7 寸 LCD 通用系列面板差异说明 5.7 寸 LCD 通用系列安装尺寸 CNC H4 10.4 寸 LCD 通用系列安装尺寸输入板(Input Board) 系统的接线总图接头的型式接头号码指定系统电缆及接线系统交流电源接线(AC Power Supply) AXIS 伺服驱动控制接线 MPG 电子手摇轮接线 D/A 模拟量输出、A/D 模拟量输入信号控制接线 RS232C 通讯接口接线 I/O 输入／输出接口接线 I/O 输入/输出接口接线方式简介直接由控制器控制 I/O 装置控制器 I/O 输入/输出接口接头的接脚分配直接由控制器控制 I/O 装置的输入信号接线直接由控制器控制 I/O 装置的输出信号接线控制器通过 I 点板 / O 点板控制 I/O 装置控制器通过 I 点板控制 I/O 装置的输入信号接线控制器通过 O 点板控制 I/O 装置的输出信号接线紧急停止线路设计系统与 PLC (或称 PMC) 接口 CNC H4 通用系列 BIT 信号说明 CNC 状态信号说明 S-Bits S-Bit 信号与 PLC 的时间关系 S000 送出 ON-0.74.OFF-0.25 的周期方波 S001 重置键信号 (Reset) / 输出板(Output Board)尺寸系统接线 (Connecting Diagrams) 页码

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

ΔVOUT/ΔT ΔVOUT/ΔVIN ΔVOUT/VOUT VIN–VOUT
IDD PSRR
— — -0.01 — — — — — — — — —
40 0.007 0.002
20 50 150 260 450 1000 1200 80 55
— 0.35
0 30 160 480 800 1300 1200 1400 130 —
Output Noise
eN
—
300
—
nV/√Hz IL = 100 mA, F = 10 kHZ
Note 1:
2:
3:
VR is the regulator output voltage setting.
The minimum VIN has to justify the conditions: VIN ≥ VR + VDROPOUT and VIN ≥ 2.7V for IL = 0.1 mA to IOUTMAX.
Parameters
Sym
Min
Typ
Max
Units
Conditions
Input Operating Voltage Maximum Output Current Output Voltage
VIN IOUTMAX
VOUT
2.7
—
6.0
V Note 2
800
—
—
mA
VR – 2.5% VR ± 0.5% VR + 2.5%
TCVOUT
=
-(--V----O----U---T---M-----A---X----–-----V---O----U----T---M----I--N----)---–-----1---0---6VOUT × ΔT
4: Regulation is measured at a constant junction temperature using low duty cycle pulse testing. Load regulation is tested over a load range from 0.1 mA to the maximum specified output current. Changes in output voltage due to heating effects are covered by the thermal regulation specification.
DSPs
Typical Application
Batபைடு நூலகம்ery
VIN
VOUT
C1
1µF
TC2117
GND
C2 1µF
VOUT
General Description
The TC2117 is a fixed, high accuracy (typically ±0.5%) CMOS low dropout regulator. Designed specifically for battery operated systems, the TC2117’s CMOS construction eliminates wasted ground current, significantly extending battery life. Total supply current is typically 80 µA at full load (20 to 60 times lower than in bipolar regulators).
DS21665C-page 1
元器件交易网
TC2117
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings†
Input Voltage .........................................................6.5V Output Voltage.................... (VSS – 0.3) to (VIN + 0.3V) Power Dissipation................Internally Limited (Note 7) Maximum Voltage on Any Pin .........VIN +0.3V to -0.3V Operating Temperature ............... -40°C < TJ < +125°C Storage temperature ..........................-65°C to +150°C
DC CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, VIN = VR + 1.5V, (Note 1), IL = 100 µA, CL = 3.3 µF, TA = +25°C. Boldface type specifications apply for junction temperatures of -40°C to +125°C.
DS21665C-page 2
© 2006 Microchip Technology Inc.
元器件交易网
TC2117
TEMPERATURE CHARACTERISTICS
Electrical Specifications: Unless otherwise indicated, VIN = VR + 1.5V, IL = 100 µA, CL = 3.3 µF, SHDN > VIH, TA = +25°C.
Applications
• 5V to 3.3V Linear Regulator • Portable Computers • Instrumentation • Battery Operated Systems • Linear Post-Regulator for SMPS • Core Voltage Supply for FPGAs, PLDs, CPUs,
† Notice: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the specifications is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability.
元器件交易网
TC2117
800 mA Fixed Low Dropout Positive Regulator
Features
• Fixed Output Voltages: 1.8V, 2.5V, 3.0V, 3.3V • Very Low Dropout Voltage • Rated 800 mA Output Current • High Output Voltage Accuracy • Standard or Custom Output Voltages • Overcurrent and Overtemperature Protection • Space Saving SOT-223 Package
Package Types
Tab is VOUT
3-Pin SOT-223 Front View
TC2117
1
2
3
VIN VOUT GND
3-Pin DDPAK Front View Tab is VOUT
TC2117
12 3
GND VOUT
VIN
© 2006 Microchip Technology Inc.
V
VR ≥ 2.5V
VR – 2% VR ± 0.5% VR + 3%
VR = 1.8V
VOUT Temperature Coefficient Line Regulation Load Regulation (Note 4) Dropout Voltage (Note 5)
Supply Current Power Supply Rejection Ratio
TC2117 key features include ultra low noise, very low dropout voltage (typically 450 mV at full load), and fast response to step changes in load. The TC2117 incorporates both overtemperature and overcurrent protection. The TC2117 is stable with an output capacitor of only 1µF and has a maximum output current of 800 mA. This device is available in 3-Pin SOT-223, and 3-Pin DDPAK packages.
perature and the thermal resistance from junction-to-air (i.e., TA, TJ, θJA). Exceeding the maximum allowable power dissipation causes the device to initiate thermal shutdown. Please see Section 4.2 “Thermal Considerations” for more details.