4160英文系列参数

The Common Specifications
（文章出于，如需更多资料请访问网站）
Back to Previous Page
(Applicable to all instrument configurations)
Specification parameters are defined per ISA's S5.1 Committee and SAMA's RC-2
0-11-1964 standard. Performance of a particular model may vary from these specifications, and may also be influenced by environmental factors. For further data, please consult the factory.（技术参数由ISA’s S5.1委员会和SAMA’s RC-2 0-11-1964标准详细说明。

某些特殊型号的指标可能和这些技术指标有所不同，也可能会受环境影响，要得到更多数据，请向厂家咨询。

）
Accuracy: 精度Analog units: ±2.0% of full scale
Digital units: ±2.0%of reading, ±1 least significant digit 读数的2%±最后一位数
(Limited to accuracy of calibration standard)
Repeatability:
重复性
±0.5% of full scale
Minimum
Detectability:
最小检出 1.0% of full scale
Linearity:
线性
±1.0% of full scale
Zero Drift:
零点飘移
±1.0% of full scale (24 hours)
Span Drift: 跨度飘移Less than ±2.0% of full scale (24 hours)
The zero and span drift specifications assume that the analyzer is equilibrated, and is at constant temperature, with a properly maintained sensor. "Drift" is defined as an undesired change in output over a period of time, which change is unrelated to input, operating conditions, or load.
Lag Time: 延迟时间Less than 1 second 小于1秒
Calibration:Against standard gas mixture, or via INTERSCAN's
Electronic Calibration Service
（文章出于，如需更多资料请访问网站）。