87340-1824;中文规格书,Datasheet资料
575-8;575-4;6092;6091;476-2;中文规格书,Datasheet资料
1BANANA JACKSTel (718)956-8900•Fax (718)956-9040(800)221-5510•kec@31-0720th Road –Astoria,NY 11105-2017RoHS COMPLIANT ~ISO 9001CERTIFIED®MATERIAL:Spring:Beryllium Copper Body:Brass,Silver PlateCAT.NO.452MATERIAL:Spring:Beryllium Copper,Nickel Plate Body:Brass,Nickel Plate Handle:Nylon.120(3.0)Plug.120(3.0)Plug.603 [15.3].153 [3.9]DIA..187 [4.8]DIA..110 [2.8].094 [2.39].078 [1.98]DIA..120 [3.1]DIA..290 [7.4].050 [1.27] DIA.TO ACCEPTWIRE..190 [4.9]DIA..104 [2.7] DIA..440 [11.2].480 [12.2].120 [3.1] DIA..290 [7.4]CAT.NO.COLOR 6076RED 6077BLACK 451NONESOLDER CONNECTIONSWAGE MOUNT MATERIAL:Body:Brass,Nickel Plate Terminal:Copper,TinnedAccepts .120(3.0)Plug.550[14.0].062 [1.57].312 [7.9]HEX..250 [6.4].106 [2.7]DIA.THRU10-32 THREADNUTTERMINAL MATERIAL:Body:Brass,Nickel Plate Terminal:Copper,Tinned Hex Head:PhenolicMATERIAL:Current Rating:15Amps Body:Brass,Nickel Plate Terminal:Brass,Tin PlateMATERIAL:Brass,Tin PlateMATERIAL:Body:NylonContact:Brass,Tin PlateCAT.NO.6096MATERIAL:Brass,Nickel PlateCAT.HEAD NO.COLOR 6093RED 6094BLACKCAT.NO.COLOR 6091RED 6092BLACKCAT.NO.6095STANDARDFULLY INSULATED Fits panel up to .375(9.6)CAT.NO.L 575-4.218(5.5)575-6.265(6.7)575-8.350(8.9)CAT.NO.L 476-2.125(3.2)476-3.165(4.2)476-4.187(4.7)Accepts .120(3.0)PlugAccepts .175(4.5)PlugFits panel up to .312(7.9)Accepts .175(4.5)PlugMATERIAL:Current Rating:15Amps Body:Brass,Nickel Plate Terminal:Brass,Tin PlateAccepts .175(4.5)PlugAccepts .175(4.5)PlugNON-INSULATED MINIATURE JACKMINIATUREINSULATED SOLDER CONNECTIONCAT.NO.6090.562[14.3].500[12.7].437[11.1].156[4.0].163[4.2]DIA.THRU.250-28 THREADNUTTERMINAL MOLDED HEX HEADFLAT WASHER SHOULDER WASHER.375 [9.5].406 [10.3].093 [2.36].163 [4.2] DIA.THRU.250-32 THREADTERMINALNUT.312[7.9].500 [12.7].375 [9.5]NUT.125 [3.2]TERMINALNUT.250-32 THREAD.163 [4.2] DIA.THRU.135 [3.5]DIA.L.075[1.91].218[5.6]DIA..106 [2.7]DIA.THRU.203 [5.2]DIA..093 [2.36].312 [7.9]DIA..163 [4.2] DIA.THRUL.182[4.6].937[23.8].433[11.0]DIA..187[4.8].234[6.0].468[11.9].093[2.36]DIA..312-32THREAD NUT Supplied with hardware UnassembledSupplied with nut and lug.UnassembledSupplied with lug and nut.UnassembledSupplied with nut and lug.UnassembledNON-INSULATEDAccepts .175(4.5)PlugNON-INSULATED STANDARD HEADNON-INSULATED RECESSED HEAD分销商库存信息:KEYSTONE-ELECTRONICS575-8575-46092 6091476-2476-4 575-660766077 60946093。
V23074A1002A403;中文规格书,Datasheet资料
101-2013, Rev. 0113Datasheets and product specification ac-Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-Micro Relay A/VFMA1) The values apply to a resistive or inductive load with suitable spark suppression and atmaximum 13.5VDC for 12VDC or 27VDC for 24VDC load voltages.2) For a load current duration of maximum 3s for a make/break ratio of 1:10.3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current.4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at /appnotes/5) Electrical endurance data are only valid for the variants with resistor.6) Not applicable for polarity reverse loads like powerwindowsn High current version with limiting continuous current 30A at 85°C n Pin assignment according to ISO 7588 part 3n Customized versions on request– 24VDC versions with special contact gap – Integrated components (e.g. diode) – Customized marking– Special covers (e.g. notches, release features) – For latching version refer to Micro Relay Latching – For low noise version refer to Micro Relay Low Noise – For high current version refer to part number table Typical applicationsCross carline up to 30A for example: ABS control, blower fans, cooling fan, door control, door lock, fuel pump, heated front screen, immobilizer, interior lights, seat control, seatbelt pretensioner, sun roof, trunk lock, valves, window lifter, wiper control.Max. DC load breaking capacityLoad limit curve 1: arc extinguishes during transit time (CO contact).Load limit curve 2: safe shutdown, no stationary arc (NO contact).Load limit curves measured with low inductive resistors verified for 1000 switching events.Contact DataForm A – StandardForm C Form A – HCContact arrangement 1 form A, 1 NO 1 form A, 1 NO 1 form C, 1 CO 1 form C, 1 CO 1 form A, 1 NORated voltage 12VDC 24VDC 12VDC 24VDC 6) 12VDCLimiting continuous current, form A/form B NO/NC NO/NC 23°C 30A 30A 30/20A 30/20A 35A 85°C 25A 25A 25/15A 25/15A 30A 125°C 10A 10A 10/8A 10/8A 15ALimiting making current 1)2), A/B (NO/NC) 120A 120A 120/40A 120/20A 120ALimiting breaking current 30A 20A 30/15A 20/10A 30A Limiting short-time current,overload current, ISO 8820-33) 1.35 x 25A, 1800s 1.35 x 25A, 1800s 1.35 x 30A, 1800s 2.00 x 25A, 5s 2.00 x 25A, 5s 2.00 x 30A, 5s 3.50 x 25A, 0.5s 3.50 x 25A, 0.5s 3.50 x 30A, 0.5s 6.00 x 25A, 0.1s 6.00 x 25A, 0.1s 6.00 x 30A, 0.1s Jump start test 24VDC for 5min conducting nominal current at 23°C Contact material silver based Min. recommended contact load 4) 1A at 5VDC Initial voltage drop NO contact at 10A, typ./max. 15/200mV NC contact at 10A, typ./max. 20/250mV Frequency of operation 6 ops./min (0.1Hz)Electrical endurance 5)resistive load at 14VDC >1x105 ops. >1x105 ops. >1x105 ops.25A 25A (NO) 30A resistive load at 28VDC >1x105 ops. >1x105 ops. 15A 15A (NO) >1x105 ops. 10A (NC)Mechanical endurance typ. 107 ops. F074_fcw1_bwFVFMA_fcw1c201-2013, Rev. 0113Datasheets and product specification ac-Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-Other DataEU RoHS/ELV compliance compliant Ambient temperature -40 to +125°C Climatic cycling with condensation, EN ISO 6988 6 cycles, storage 8/16h Temperature cycling, IEC 60068-2-14, Nb 10 cycles, -40/+85°C (5°C/min) Damp heat cyclic,IEC 60068-2-30, Db, Variant 1 6 cycles, upper air temp. 55°C Damp heat constant,IEC 60068-2-3 (78), Ca 56 days Category of environmental protection, IEC 61810 RT I – dustproof Degree of protection, IEC 60529 IP54 Corrosive gas IEC 60068-2-42 10±2cm 3/m 3 SO 2, 10 days IEC 60068-2-43 1±0.3cm 3/m 3 H 2S, 10 days Vibration resistance (functional) IEC 60068-2-6 (sine sweep) 10 to 500Hz min. 5g 8) Shock resistance (functional) IEC 60068-2-27 (half sine) min. 20g 11ms 8) Drop test, free fall, IEC 60068-2-32 1m onto concrete Terminal type plug-in, QC Cover retention axial force 150N pull force 150N push force 200N Terminal retention pull force 100N push force 100N resistance to bending 10N 9) force applied to side 10N 9) torque 0.3Nm Weight approx. 16 to 20g (0.5 to 0.7oz)Packaging unit Micro A 480 pcs. VFMA 600 pcs.8) No change in the switching state >10µs. Valid for NC contacts, NO contact values significantly higher.9) Values apply 2mm from the end of the terminal. When the force is removed, the terminal must not have moved by more than 0.3mmAccessoriesFor details see datasheetConnectors for Micro ISO RelaysCoil DataCoil voltage range 12/24VDCCoil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance 7) power 7) VDC VDC VDC Ω±10% W 001 12 7.2 1.6 119 1.20 002 24 14.4 3.6 430 1.34 005 12 7.2 1.6 144 1.00 F 12 7.2 1.2 90 1.60 H 24 14.4 3.6 430 1.34All figures are given for coil without pre-energization, at ambient temperature +23°C.7) Without components in parallel.Insulation DataInitial dielectric strength between open contacts 500VAC rms between contact and coil 500VAC rms Load dump testISO 7637-1 (12VDC), test pulse 5 Vs=+86.5VDC ISO 7637-2 (24VDC), test pulse 5Vs=+200VDCNOD1 form A, 1 NO with diodeNOR1 form A, 1 NO with resistorTerminal Assignment COD1 form C, 1 CO with diodeCOR1 form C, 1 CO with resistor5435435353Does not take into account the temperature rise due to the contact currentE = pre-energization.Does not take into account the temperature rise due to the contact current E = pre-energization Coil operating range301-2013, Rev. 0113Datasheets and product specification ac-Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-View of the terminals (bottom view)Quick connect terminal similar to ISO 8092-1.Micro A: Terminals without holes401-2013, Rev. 0113Datasheets and product specification ac-Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-Product code structureTypical product code V23074 -A 1 001 -A4 02Type V23074 Micro Relay A Version A Standard H High current Coil suppression 1 Resistor 2 Diode Coil 001 12VDC 002 24VDC00512VDC for high current versionContact material -A4 Silver based -A5 Silver based for high current version Contact arrangement 02 1 form A, 1 NO031 form C, 1 COProduct code structureTypical product codeVFMA -1 1 F 4 1 -S01Type VFMA VFMA Series Version 1 Standard Contact arrangement 1 1 form A, 1 NO 5 1 form C, 1 COCoil F 12VDC H 24VDC Contact material 4 Silver based 7Silver based for high current versionTerminals 1 Plug-in Coil suppression S01 ResistorOther types on request.This list represents the most common types and does not show all variants covered by this datasheet.分销商库存信息: TE ConnectivityV23074A1002A403。
DMN601TK-7;中文规格书,Datasheet资料
Features• Low On-Resistance: R DS(ON) • Low Gate Threshold Voltage • Low Input Capacitance • Fast Switching Speed• Low Input/Output Leakage• Lead Free By Design/RoHS Compliant (Note 2) • ESD Protected Up To 2kV • "Green" Device (Note 4)Mechanical Data• Case: SOT-523 • Case Material: Molded Plastic, “Green” MoldingCompound. UL Flammability Classification Rating 94V-0 • Moisture Sensitivity: Level 1 per J-STD-020D • Terminals: Finish ⎯ Matte Tin annealed over Alloy 42leadframe. Solderable per MIL-STD-202, Method 208 • Terminal Connections: See Diagram • Marking Information: See Page 3 • Ordering Information: See Page 3 • Weight: 0.002 grams (approximate)Maximum Ratings @T A = 25°C unless otherwise specifiedCharacteristicSymbol Value Units Drain-Source Voltage V DSS 60 VGate-Source Voltage V GSS±20 V Drain Current (Note 1) ContinuousPulsed (Note 3)I D300800mAThermal Characteristics @T A = 25°C unless otherwise specifiedCharacteristicSymbol Value Units Total Power Dissipation (Note 1)P D 150 mW Thermal Resistance, Junction to Ambient R θJA 833 °C/W Operating and Storage Temperature Range T J , T STG-65 to +150°CElectrical Characteristics @T A = 25°C unless otherwise specifiedCharacteristicSymbol Min Typ Max UnitTest ConditionOFF CHARACTERISTICS (Note 5) Drain-Source Breakdown Voltage BV DSS 60 ⎯ ⎯ V V GS = 0V, I D = 10μA Zero Gate Voltage Drain Current I DSS ⎯ ⎯ 1.0 μA V DS = 60V, V GS = 0V Gate-Source LeakageI GSS ⎯ ⎯ ±10 μA V GS = ±20V, V DS = 0V ON CHARACTERISTICS (Note 5) Gate Threshold VoltageV GS(th) 1.0 1.6 2.5 VV DS = 10V, I D = 1mA Static Drain-Source On-Resistance R DS (ON) ⎯ ⎯ ⎯ 2.0 3.0 ΩV GS = 10V, I D = 0.5A V GS = 5V, I D = 0.05A Forward Transfer Admittance |Y fs | 80 ⎯ ⎯ ms V DS =10V, I D = 0.2A DYNAMIC CHARACTERISTICS Input Capacitance C iss ⎯ ⎯ 50 pF V DS = 25V, V GS = 0V f = 1.0MHz Output CapacitanceC oss ⎯ ⎯ 25 pF Reverse Transfer CapacitanceC rss⎯⎯5.0pFNotes: 1. Device mounted on FR-4 PCB. 2. No purposefully added lead.3. Pulse width ≤10μS, Duty Cycle ≤1%4. Diodes Inc.’s “Green” policy can be found on our website at /products/lead_free/index.php.5. Short duration pulse test used to minimize self-heating effect.SOT-523TOP VIEWPin Out ConfigurationESD Protected up to 2kVEQUIVALENT CIRCUITPlease click here to visit our online spice models database.V , DRAIN-SOURCE VOLTAGE (V)Fig. 1 Typical Output CharacteristicsDS I , D R A I N C U R R E N T (A )DFig. 2 Typical Transfer CharacteristicsGS T , CHANNEL TEMPERATURE (°C)Fig. 3 Gate Threshold Voltage vs. Channel T emperaturech 00.51.5I DRAIN CURRENT (A)Fig. 4 Static Drain-Source On-Resistancevs. Drain CurrentD , R , S T A T I C D R A I N -S O U R CE D S (O N)Fig. 5 Static Drain-Source On-Resistancevs. Drain CurrentDR , S T A T I C D R A I N -S O U R C E D S (O N )V GATE SOURCE VOLTAGE (V)Fig. 6 Static Drain-Source On-Resistancevs. Gate-Source VoltageGS,R , S T A T I C D R A I N -S O U R C E O N -R E S I S T A N C E ()D S (O N )ΩFig. 7 CH Static Drain-Source On-State Resistancevs. Channel T emperatureR , S T A T I C D R A I N -S O U R C E D S (O N )1I , R E V E R S E D R A I N C U R RE N T (A )D R 1I , DRAIN CURRENT (A)D Fig.10 Forward Transfer Admittancevs. Drain CurrentOrdering Information (Note 6)Part Number Case Packaging DMN601TK-7SOT-523 3000/Tape & ReelNotes: 6. For packaging details, go to our website at /datasheets/ap02007.pdf.Marking InformationDate Code KeyYear 2005 2006 2007 2008 2009 2010 2011 2012 Code S T U V W X Y ZMonth Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O N DK7K = Product Type Marking Code YM = Date Code Marking Y = Year (ex: S = 2005) M = Month (ex: 9 = September) K7K YMPackage Outline DimensionsSuggested Pad LayoutIMPORTANT NOTICEDiodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.LIFE SUPPORTDiodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.SOT-523Dim Min Max Typ A 0.15 0.30 0.22 B 0.75 0.85 0.80 C 1.45 1.75 1.60 D ⎯ ⎯ 0.50 G 0.90 1.10 1.00 H 1.50 1.70 1.60 J 0.00 0.10 0.05 K 0.60 0.80 0.75 L 0.10 0.30 0.22 M 0.10 0.20 0.12 N 0.45 0.65 0.50α0° 8° ⎯ All Dimensions in mmDimensions Value (in mm)Z1.8 X 0.4 Y 0.51 C 1.3 E 0.7X EYCZ分销商库存信息: DIODESDMN601TK-7。
1474A产品系列电缆技术数据表说明书
AWM Compliance:
AWM 2464
CEC / C(UL) Compliance: CMG
European Directive Compliance:
EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC Compliance:
China RoHS II (GB/T 26572-2011)
History
Update and Revision:
Revision Number: 0.394 Revision Date: 02-08-2022
Part Numbers
Variants
Item #
Color Putup Type Length
PVC - Polyvinyl Chloride 0.053 in (1.3 mm) 0.432 in (11.0 mm) Yes
Overall Cable Diameter (Nominal):
0ectrical Characteristics
Electricals
Inner Shield
Element
Shield Type
Material
Coverage Drainwire Type Notes
Pair(s)
Tape
Bi-Laminate (Alum+Poly) 100%
20 AWG (7x28) TC each pair
'Stranding@Conductor1' No Shield
Littelfuse 保护电路器件 SPD2 4+0 系列商品说明书
Class II/Type 2/Type 1 CA Pluggable Multi-PoleDescriptionSurge protection devices (SPDs) provide equipment protection from transient overvoltage events lasting micro-seconds. By limiting the overvoltage to the equipment during these events, costly damage and downtime can be mitigated.The surge protection devices for the 4+0 configuration are available for 120 V to 480 V nominal voltage sub-distribution board applications.RCLegend L Line N Neutral Protective EarthRC Remote ContactsTD Thermal DisconnectionInternal ConfigurationFeatures & BenefitsModule & Base Ordering InformationCapability to clamp and withstand high-energy transients surge events and higher nominal discharge current to prevent disruption, downtime, and degradation or damage to equipment UL and VDE-IEC compliant in single part number One component can be utilized globally, reducing inventory needs and simplifying allocation of parts Interlocking tab mechanismSecures module to withstand vibration No additionalovercurrent protection devices required in UL applicationsReduces the number of components and costs required for protectionCompact footprint I ncreases panel design flexibilityVisual life indicatorQuick visual determines module replacement status to avoid loss of protectionPluggable modules Fast and simple to replace, minimizing maintenance and downtime. No tools required Thermal protection Eliminates catastrophic failureIP20 protection ratingFinger-safe design increases worker protectionPluggable RC ConnectorReplacement Module Ordering InformationDisclaimer Notice – Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at /product-disclaimer.Thermal Protection YesOperating State/Fault Indica tionGreen Flag/No Green FlagRemote Contact Switching Ca pa city AC: 250 V/1 A, 125 V/1 A;DC: 48 V/0.5 A, 24 V/0.5 A, 12 V/0.5 A Remote Contact Conductor Cross Section (max) 1.5 mm 2 (16 AWG) (Solid)Standards Passed* IEC 61643-11:2011 EN 61643-11:2012UL 1449, 4th editionProduct Dimensions 4TE Module and Base H 90.0 mm (3.54”); W 72.0 mm (2.84”);D 70.0 mm (2.76”)1TE Replacement Module H 45.0 mm (1.77”); W 18.0 mm (0.71”);D 57.2mm (2.25”)Package Dimensions 4TE Module and Base H 102.0 mm (4.01”); W 82.0 mm (3.23”);D 110.0 mm (4.33”)1TE Replacement Module H 102.0 mm (4.01”); W 28.0 mm (1.10”);D 110.0 mm (4.33”)SpecificationsNetwork Systems TN-S Mode of Protection L-PE, N-PE Nominal Discharge Current (8/20 µs) (I n ) 20 kA Maximum Discharge Current (8/20 µs) (I max ) Up to 50 kA Protective Elements High Energy MOV Response Time (t A ) < 25 ns Back-Up Fuse (max) 315 A / 250 A Gg Number of Ports 1Mechanical & Environmental Operating Temperature Range (T a ) -40 °C to +80 °C (-40 °F to +185 °F)Permissible Operating Humidity (RH) 5% to 95%Altitude (max) 4,000 m (13,123 ft)Terminal Screw Torque (M max ) 4.5 Nm (39.9 lbf-in)Conductor Cross Section (max) 35 mm² (2 AWG) (Solid, Stranded)/ 25 mm 2 (4 AWG) (Flexible)Mounting 35 mm DIN Rail, EN60715Degree of Protection IP20 (built-in)Housing Material Thermoplastic: Extinguishing Degree UL 94 V-0*SPD2-550-4P0-R and SPD2-550-M are UL Listed onlyWarranty – Visit /warranty for details.Module & Base Part Numbering SystemModule Only Part Numbering SystemSPD2 VVV MModule OnlySeriesMaximum Continuous Operating AC VoltageSPD2 VVV XPZ RModule & Base SeriesNeutralNumber of PolesMaximum Continuous Operating AC Voltage(1=yes or 0=no)。
DMN2004DWK-7;中文规格书,Datasheet资料
Features• Dual N-Channel MOSFET • Low On-Resistance • Low Gate Threshold Voltage • Low Input Capacitance • Fast Switching Speed • Low Input/Output Leakage • Ultra-Small Surface Mount Package • Lead Free By Design/RoHS Compliant (Note 1) • ESD Protected up to 2KV • "Green" Device (Note 2) • Qualified to AEC-Q101 standards for High ReliabilityMechanical Data• Case: SOT363 • Case Material: Molded Plastic, “Green” MoldingCompound. UL Flammability Classification Rating 94V-0 • Moisture Sensitivity: Level 1 per J-STD-020 • Terminal Connections: See Diagram • Terminals: Finish - Matte Tin annealed over Alloy 42leadframe. Solderable per MIL-STD-202, Method 208 • Weight: 0.006 grams (approximate)Ordering Information (Note 3)Part Number Case Packaging DMN2004DWK-7SOT363 3000/Tape & ReelNotes: 1. No purposefully added lead.2. Diodes Inc.’s “Green” policy can be found on our website at .3. For packaging details, go to our website at .Marking InformationDate Code KeyYear 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Code T U V W X Y Z A B C D EMonth Jan Feb Mar Apr MayJun Jul Aug Sep Oct Nov Dec Code 1 2 3 4 5 6 7 8 9 O NDSOT363Top ViewTop ViewInternal SchematicNAB = Marking Code YM = Date Code Marking Y = Year (ex: T = 2006) M = Month (ex: 9 = September) ESD PROTECTED TO 2kVNAB YM N A B Y MMaximum Ratings @T A = 25°C unless otherwise specifiedCharacteristic Symbol Value UnitsDrain-Source Voltage V DSS20 V Gate-Source VoltageV GSS±8 V Drain Current (Note 4)SteadyStateT A = 25°C T A = 85°CI D 540 390mAPulsed Drain Current (Note 5) I DM1.5 AThermal Characteristics @T A = 25°C unless otherwise specifiedCharacteristic Symbol Value UnitsTotal Power Dissipation (Note 4) P D 200 mW Thermal Resistance, Junction to Ambient R θJA 625 °C/W Operating and Storage Temperature Range T J, T STG -65 to +150 °CElectrical Characteristics @T A = 25°C unless otherwise specifiedCharacteristic Symbol Min Typ Max Unit Test ConditionOFF CHARACTERISTICS (Note 6) Drain-Source Breakdown Voltage BV DSS 20 ⎯ ⎯ V V GS = 0V, I D = 10μA Zero Gate Voltage Drain Current I DSS ⎯ ⎯ 1 μA V DS = 16V, V GS= 0V Gate-Source Leakage I GSS ⎯ ⎯ ±1 μA V GS = ±4.5V, V DS = 0V ON CHARACTERISTICS (Note 6)Gate Threshold Voltage V GS(th)0.5 ⎯ 1.0 V V DS = V GS , I D = 250μA Static Drain-Source On-Resistance R DS (ON)⎯ 0.4 0.5 0.7 0.550.70 0.9 Ω V GS = 4.5V, I D = 540mA VGS = 2.5V, I D = 500mA V GS = 1.8V, I D = 350mAForward Transfer Admittance |Y fs |200 ⎯ ⎯ ms V DS =10V, I D = 0.2A Diode Forward Voltage (Note 6) V SD0.5 ⎯ 1.4 V V GS = 0V, I S = 115mA DYNAMIC CHARACTERISTICSInput Capacitance C iss⎯ ⎯ 150 pF V DS = 16V, V GS = 0Vf = 1.0MHzOutput Capacitance C oss⎯ ⎯ 25 pF Reverse Transfer Capacitance C rss⎯ ⎯ 20 pF Notes:4. Device mounted on FR-4 PCB.5. Pulse width ≤10μS, Duty Cycle ≤1%.6. Short duration pulse test used to minimize self-heating effect.V , DRAIN-SOURCE VOLTAGE (V)Fig. 1 Typical Output CharacteristicsDS I , D R A I N C U R R E N T (A )D V , GATE-SOURCE VOLTAGE (V)Fig. 2 GS Reverse Drain Current vs. Source-Drain VoltageT , CHANNEL TEMPERATURE (°C)Fig. 3 Gate Threshold Voltage vs. Channel Temperaturech 0.1I DRAIN CURRENT (A)Fig. 4 Static Drain-Source On-Resistance Vs. Drain Current D ,1R , S T A T I C D R A I N -S O U R C E O N -R E S I S T A N C E ()D S (o n )ΩI , DRAIN CURRENT (A)Fig. 5 Static Drain-Source On-Resistance vs. Drain CurrentD R , S T A T I C D R A I N -S O U R CE O N -R E S I S T A N C E ()D S (o n )ΩI , DRAIN CURRENT (A)Fig. 7DOn-Resistance vs. Drain Current and Gate Voltage T , JUNCTION TEMPERATURE (C)Fig. 8 j °Static Drain-Source, On-Resistance vs. TemperatureI , D R A I N -S O U R C E L E A K A G E C U R R E N T (n A )D SS I , R E V E R S E D R A I N C U R R E N T (A )DR 1000I , DRAIN CURRENT (mA)DFig. 11 Forward Transfer Admittance vs. Drain Current|Y |, F O R W A R D T R A N S F E R A D M I T T A N C E(S )fs V , DRAIN SOURCE VOLTAGE (V)DS Fig. 12 Capacitance VariationPackage Outline DimensionsSOT363Dim Min Max A 0.10 0.30 B 1.15 1.35 C 2.00 2.20 D 0.65 Typ F 0.40 0.45 H 1.80 2.20 J 0 0.10 K 0.901.00 L 0.25 0.40 M 0.10 0.22α0° 8° All Dimensions in mmSuggested Pad LayoutIMPORTANT NOTICEDIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages.Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks.LIFE SUPPORTDiodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in thelabeling can be reasonably expected to result in significant injury to the user.B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness.Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.Copyright © 2011, Diodes IncorporatedDimensions Value (in mm)Z 2.5 G 1.3 X 0.42 Y 0.6 C1 1.9 C2 0.65XZYC1C2C2G分销商库存信息: DIODESDMN2004DWK-7。
远东电缆参数表
聚氯乙烯绝缘电线（电缆）PVC Insulated Wire and Cables远东电缆有限公司FAR EAST CABLE CO,.LTD一．产品标准Standards产品按GB/T5023-2008/IEC60227《额定电压450/750V及以下聚氯乙烯绝缘电缆》、JB8734-1998《额定电压450/750V及以下聚氯乙烯绝缘电缆电线和软线》标准生产聚氯乙烯绝缘电线电缆，同时还可根据用户需要按国际电工委员会推荐标准IEC、英国标准、德国标准及美国标准生产.二．适用范围Applications本产品适用于工频额定电压U0/U 450/750V及以下动力、日用电器、仪器仪表及电信设备。
三．使用特性Operating characteristics●额定电压U0/U为450/750V、300/500V和300/300V。
●电缆导体的最高允许工作温度Max. admissible operating temperature of the conductors 60227IEC07（BV-90）.......................... ..............90℃60227IEC08（RV-90）.................. ......................90℃60227IEC56（RVV-90）........................ ...............90℃60227IEC57（RVV-90）........................................90℃其它型号 the other types.................................70℃●电缆敷设时环境温度应不低于0℃。
●电缆弯曲半径 The bending radius of cableD≤25mm........................................≥ 4 DD>25mm.........................................≥ 6 DType and description of the cable五.生产范围Production range of cable六．结构尺寸及主要技术参数Construction and main technical data60227 IEC 01 （BV）型60227 IEC 05 （BV）型60227 IEC 06 （RV）型导体标称截面mm2导体种类绝缘厚度mm平均外径mm 近似重量kg/km导体（铜）最大电阻20 ℃MΩ·km70℃时最小绝缘电阻MΩ·km下限上限不镀金属镀金属0.5 0.75 11.52.5 111110.60.60.60.70.81.92.12.22.63.22.32.52.73.23.98.0410.5513.2819.4130.7436.024.518.112.17.4136.724.818.212.27.560.0150.0130.0120.0110.00960227 IEC 08 （RV-90）型标称截面mm2导体种类绝缘厚度mm平均外径上限mm 近似重量kg/km导体（铜）最大电阻20 ℃MΩ·km 70℃时最小绝缘电阻MΩ·km不镀金属Non-metalplate镀金属Metalplate下限上限0.5 0.75 11.52.5 555550.60.60.60.70.82.12.22.42.83.42.52.72.83.44.18.3411.0813.7319.8830.9539.026.019.513.37.9840.126.720.013.78.210.0130.0120.0100.0090.009BV、BV-90 型与 RV、RV-90 型60227 IEC 10 （BVV）型60227 IEC 42 （RVB ）型导体标称截面mm2导体种类绝缘厚度规定值mm平均外形尺寸20℃时导体（铜）最大电阻70℃时最小绝缘电阻MΩ·km参考重量kg/km下限mm上限mm不镀金属镀金属0.5 0.75 660.80.82.5×5.02.7×5.43.0×6.03.2×6.439.026.040.126.70.0160.01420.4026.0960227 IEC 52 （RVV）型导体标称截面mm2导体种类绝缘厚度规定值mm护套厚度规定值mm平均外形尺寸20℃时导体（铜）最大电阻70℃时最小绝缘电阻MΩ·km参考重量kg/km下限mm上限mm不镀金属镀金属2×0.52×0.753×0.5 3×0.75 5555550.50.50.50.50.50.50.60.60.60.60.60.64.63.0×4.94.93.2×5.24.95.25.93.7×5.96.33.8×6.36.36.739.039.026.026.019.519.540.140.126.726.720.020.00.0120.0120.0100.0100.0120.01039.1624.8246.8631.0449.7060.4560227 IEC 53 （RVV）型导体标称截面mm2导体种类绝缘厚度规定值mm护套厚度规定值mm平均外形尺寸20℃时导体（铜）最大电阻70℃时最小绝缘电阻MΩ·km参考重量kg/km下限mm上限mm不镀金属镀金属2×0.752×12×1.5 2×2.5 *2×4 *2×6 555555550.60.60.60.60.70.80.80.80.80.80.80.80.81.01.11.25.73.7×6.05.93.9×6.26.88.410.312.57.24.5×7.27.54.7×7.58.6010.612.414.626.026.019.519.513.37.984.953.3026.726.720.020.013.78.215.093.390.0110.0110.0100.0100.0100.0090.0070.00649.2439.3456.5945.7474.60113.45159.13224.88*16×1 *16×1.5 *16×2.5 *16×4 *16×6 *19×0.75 *19×1 *19×1.5 *19×2.5 *19×4 *19×6 *24×0.75 *24×1 *24×1.5 *24×2.5 *24×4 *24×6 555555555555555550.60.70.80.80.80.60.60.70.80.80.80.60.60.70.80.80.81.21.41.71.71.71.51.51.71.71.71.81.21.31.41.51.71.713.316.119.121.926.613.113.916.720.523.128.116.017.020.324.127.233.516.319.122.125.530.216.317.119.923.726.931.919.220.223.527.331.037.319.513.37.984.953.3026.019.513.37.984.953.3026.019.513.37.984.953.3020.013.78.215.093.3926.720.013.78.215.093.3926.720.013.78.215.093.390.0100.0100.0090.0070.0060.0110.0100.0100.0090.0070.0060.0110.0100.0100.0090.0070.006300.67436.64638.98937.641319.83289.10345.34493.43756.981086.281532.84384.99457.68648.44952.111369.821953.4760227 IEC 56 （RVV-90）型导体标称截面mm2导体种类绝缘厚度规定值mm护套厚度规定值mm平均外形尺寸20℃时导体（铜）最大电阻70℃时最小绝缘电阻MΩ·km参考重量kg/km下限mm上限mm不镀金属镀金属2×0.52×0.753×0.5 3×0.75 5555550.50.50.50.50.50.50.60.60.60.60.60.64.63.0×4.94.93.2×5.24.95.25.93.7×5.96.33.8×6.36.36.739.039.026.026.019.519.540.140.126.726.720.020.00.0120.0120.0100.0100.0120.01039.1624.8246.8631.0449.7060.4560227 IEC 57（RVV-90）型导体标称截面mm2导体种类绝缘厚度规定值mm护套厚度规定值mm平均外形尺寸20℃时导体（铜）最大电阻70℃时最小绝缘电阻MΩ·km参考重量kg/km下限mm上限mm不镀金属镀金属2×0.75 2×1 55550.60.60.60.60.80.80.80.85.73.7×6.05.93.9×6.27.24.5×7.27.54.7×7.526.026.019.519.526.726.720.020.00.0110.0110.0100.01049.2439.3456.5945.74BV型300/500V 铜芯聚氯乙烯绝缘电线导体标称截面mm2绞合导体中单线最少根数Min绝缘厚度规定值mm平均外径上限mm20℃时导体电阻最大值Ω/km70℃时最小绝缘电阻MΩ·km参考重量kg/km铜芯copperconductor镀锡铜芯tinnedcopperconductor0.75 1 770.60.62.62.824.518.124.818.20.0140.01311.1513.99BLV型450/750V铜芯聚氯乙烯绝缘电缆导体标称截面mm2实心导体或绞合导体中单线最少根数绝缘厚度规定值mm平均外径上限mm20℃时导体电阻最大值Ω/km70℃时最小绝缘电阻MΩ·km参考重量kg/km*1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 *500 *630 1111777719191937373761616161910.70.80.80.81.01.01.21.21.41.41.61.61.82.02.22.42.62.83.03.43.94.45.06.77.89.710.912.814.617.118.820.923.326.629.633.236.640.8-12.17.414.613.081.911.200.8680.6410.4430.3200.2530.2060.1640.1250.1000.0778---0.0100.00850.00700.00650.00500.00500.00400.00450.00350.00350.00320.00320.00320.00320.00300.0028--10.2215.5121.1328.2749.9370.80110.24143.30193.85263.29362.46440.93545.00683.20886.251105.541397.911743.562183.94 BVR型450/750V铜芯聚氯乙烯绝缘软电缆导体标称截面mm2绞合导体中单线最少根数绝缘厚度规定值mm平均外径上限mm20℃时导体电阻最大值Ω/km70℃时最小绝缘电阻MΩ·km参考重量kg/km铜芯镀锡铜芯2.5 4 6 10 16 19191949490.80.80.81.01.04.14.85.36.88.17.414.613.081.831.157.564.703.111.841.160.0110.0090.00840.00720.006232.1247.5768.48121.35174.5825 35 50 70 *95 *120 *150 *185 *2409813313318925925970370312201.21.21.41.41.61.61.82.02.210.211.713.916.018.119.822.425.027.80.7270.5240.3870.268-----0.7340.5290.3910.270-----0.00580.00520.00510.0045-----285.52376.73517.43719.28979.001206.141523.931895.952390.60 BVV型300/500V铜芯聚氯乙烯绝缘聚氯乙烯护套圆形电缆标称截面mm2实心导体或绞合导体中单线最少根数绝缘厚度规定值mm护套厚度规定值mm平均外径上限mm20℃时导体电阻最大值Ω/km70℃时最小绝缘电阻MΩ·km参考重量kg/km下限lowerlimit上限Upperlimit铜芯copperconductor镀锡铜芯tinnedcopperconductor0.751.01.52.5 2.5 4 4 6 6 10 11117171770.60.60.70.80.80.80.80.80.81.00.80.80.80.80.80.90.90.90.90.93.63.74.24.84.85.45.55.96.07.34.44.55.05.75.96.56.87.17.38.824.518.112.17.417.414.614.613.083.081.8324.818.212.27.567.564.704.703.113.111.840.0120.0110.0110.0100.0090.00850.00770.00700.00650.006520.8724.1631.8545.2647.9863.9766.8585.3288.70140.14 BLVV型300/500V铝芯聚氯乙烯绝缘聚氯乙烯护套圆形电缆主要技术参数标称截面Nom.cross sectional area of conductormm2实心导体或绞合导体中单线最少根数Min number of thesingle wire in solidor flexibleconductor绝缘厚度规定值Thick ofinsulationsettedmm护套厚度规定值Thick ofsheathsettedmm平均外径averagediametermm20℃时导体电阻最大值Max.resistanced.c. of conductorat 20 ℃Ω/km70℃时最小绝缘电阻Min resistanceof insulationat 70℃MΩ·km参考重量Referencedweightkg/km下限lowerlimit上限Upperlimit0.751.01.52.5 4 6 10 11111170.60.60.70.80.80.81.00.80.80.80.80.90.90.93.63.74.24.85.45.97.34.44.55.05.76.57.18.8---12.17.414.613.080.0120.0110.0110.0100.00850.00700.006516.3017.9822.6630.0439.7148.8477.11B V V B、B L V V B型300/500V铜、铝芯聚氯乙烯绝缘聚氯乙烯护套扁形电缆主要技术参数芯数×标称截面Nom.cross sectional area of conductormm2实心导体或绞合导体中单线最少根数Min number ofthe single wirein solid orflexibleconductor绝缘厚度规定值Thick ofinsulation settedmm护套厚度规定值Thick ofsheathsettedmm平均外径average diametermm20℃时导体电阻最大值Max.resistance d.c. ofconductor at 20 ℃Ω/km70℃时最小绝缘电阻Minresistance ofinsulation at70℃MΩ·km参考重量Referencedweightkg/km下限lowerlimit上限Upperlimit铜芯Cucore镀锡铜芯tinnedCucore铝芯AlcoreBVVB BLVVB2×0.75 2×1.0 2×1.5 2×2.5 2×4 2×4 2×6 2×6 2×10 3×0.75 3×1.0 3×1.5 3×2.5 3×4 3×4 3×6 3×6 3×101111171771111171770.60.60.70.80.80.80.80.81.00.60.60.70.80.80.80.80.81.00.90.90.91.01.01.01.11.11.20.90.90.91.01.11.11.11.11.23.8×5.93.9×6.14.4×7.05.1×8.45.6×9.25.6×9.26.2×10.46.2×10.47.9×13.43.8×7.93.9×8.44.4×9.65.1×11.65.8×13.15.8×13.16.2×14.56.2×14.57.9×19.04.6×7.14.8×7.45.3×8.56.2×10.16.7×11.16.7×11.17.5×12.57.5×12.59.5×16.24.6×9.64.8×10.15.3×11.76.2×14.07.0×15.87.0×15.87.8×18.27.8×18.29.5×23.024.518.112.17.414.614.613.083.081.8324.518.112.17.414.614.613.083.081.8324.818.212.27.564.704.703.113.111.8424.818.212.27.564.704.703.113.111.84---12.17.41-4.61-3.08---12.17.41-4.61-3.080.0120.0110.0110.0100.00850.0080.00700.00650.00650.0120.0110.0110.0100.00850.0080.00700.00650.006538.5144.9960.1288.43122.53128.06168.88175.63281.4455.2163.9686.32127.79183.07191.41246.64256.44412.9029.3732.6341.7557.9873.9977.8195.91100.75155.1541.5145.4158.7682.11110.26116.03137.19144.11223.47RVS 型300/300V铜芯聚氯乙烯绝缘绞型连接用软电线主要技术参数芯数×标称截面Nom.cross sectional area of conductormm2导体中单线最大直径Max diameter ofthe single wire inconductormm绝缘厚度规定值Thick ofinsulationsettedmm平均外径上限Upper limit ofaverage diamm20℃时导体电阻最大值Max.resistance d.c. ofconductor at 20 ℃Ω/km70℃时最小绝缘电阻Min resistance ofinsulation at70℃MΩ·km参考重量Referencedweightkg/km铜芯coppercore镀锡铜芯tinnedcoppercore2×0.5 0.16 0.8 6.0 39.0 40.1 0.016 22.032×0.75 0.16 0.8 6.2 26.0 26.7 0.014 28.18 RVP、RVP-90型300/300V铜芯聚氯乙烯绝缘屏蔽软电缆主要技术参数芯数×标称截面Nom.cross sectional area of conductormm2导体中单线最大直径Max diameter ofthe single wirein conductormm绝缘厚度规定值Thick ofinsulationsettedmm屏蔽层单线直径diameter ofthe singlewire in screenmm平均外径或外形尺寸上限Upper limit ofaveragediametermm20℃时导体电阻最大值Max.resistanced.c. of conductorat 20 ℃Ω/km70℃时最小绝缘电阻Min resistanceof insulationat 70℃MΩ·km参考重量Referencedweightkg/km铜芯coppercore镀锡铜芯tinnedcoppercore1×0.08 1×0.12 1×0.2 1×0.3 1×0.4 1×0.5 1×0.75 1×1.0 1×1.5 1×2.5 *1×4 *1×6 2×0.08 2×0.12 2×0.2 2×0.3 2×0.4 2×0.5 2×0.75 2×1.0 2×1.5 *2×2.5 *2×4 0.130.160.160.160.160.210.210.210.260.260.310.310.130.160.160.160.160.210.210.210.260.260.310.40.40.40.50.50.50.50.60.60.70.80.80.40.40.40.50.50.50.50.60.60.70.80.100.100.100.100.150.150.150.150.150.150.150.150.100.100.100.150.150.150.150.150.150.150.151.92.02.22.63.03.13.43.84.14.95.76.73.33.53.94.85.25.46.06.87.48.710.224715892.369.248.239.026.019.513.37.98--24715892.369.248.239.026.019.513.3--25416395.071.249.640.126.720.013.78.21--25416395.071.249.640.126.720.013.7--0.0180.0160.0130.0140.0130.0120.0100.0100.0090.008--0.0180.0160.0130.0140.0130.0120.0100.0100.009--5.015.777.159.3011.0012.3515.4619.9625.5542.4062.4384.1711.7513.5016.6626.3630.5833.8841.3652.7866.03101.66141.18RVVP型300/300V铜芯聚氯乙烯绝缘屏蔽聚氯乙烯护套软电缆主要技术参数芯数×标称截面Nom.cross sectional area of conductormm2导体中单线最大直径Max diameterof thesingle wirein conductormm绝缘厚度规定值Thick ofinsulation settedmm屏蔽层单线直径diameterof thesinglewire inscreenmm护套厚度规定值Thick ofsheathsettedmm平均外径或外形尺寸Upper limit ofaverage diametermm20℃时导体电阻最大值Max.resistanced.c. of conductorat 20 ℃Ω/km70℃时最小绝缘电阻Min resistanceof insulationat 70℃MΩ·km参考重量Referencedweightkg/km下限lowerlimit上限Upperlimit铜芯coppercore镀锡铜芯tinnedcoppercore1×0.3 1×0.4 1×0.5 1×0.75 1×1.0 1×1.5 1×2.5 *1×4 *1×6 2×0.32×0.42×0.52×0.752×1.02×1.5*2×2.5*2×43×0.3 3×0.4 3×0.5 3×0.75 3×1.0 0.160.160.210.210.210.260.260.310.310.160.160.210.210.210.260.260.310.160.160.210.210.210.50.50.50.50.60.60.70.80.80.50.50.50.50.60.60.70.80.50.50.50.50.60.100.100.100.100.100.100.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.40.40.40.40.60.60.60.80.80.60.60.60.60.60.81.01.00.60.60.60.60.82.93.03.13.44.14.34.96.07.14.83.5×5.15.13.6×5.45.33.7×5.65.84.0×6.16.44.3×6.77.34.9×7.69.06.0×9.310.47.1×10.75.15.45.66.13.53.73.84.14.95.26.07.18.26.24.2×6.26.64.4×6.66.84.5×6.87.44.8×7.48.25.2×8.39.26.0×9.310.97.1×11.011.58.2×11.66.56.97.169.248.239.026.019.513.37.98--69.2-48.2-39.0-26.0-19.5-13.3-7.98---69.248.239.026.019.571.249.640.126.720.013.78.21--71.2-49.6-40.1-26.7-20.0-13.7-8.21---71.249.640.126.720.00.0140.0130.0120.0100.0100.0090.008--0.014-0.013-0.012-0.010-0.010-0.009-0.008---0.0140.0130.0120.0100.01014.4616.4417.9921.5030.2536.6455.9283.60107.5440.1635.7045.1940.0949.0543.4857.6851.1171.2262.6892.9082.07143.53125.84188.10165.4946.6553.1558.2069.6293.67七．载流量 Current carrying capacity固定敷设用单芯聚氯乙烯绝缘电线连续负荷载流量（A）Current carrying capacity of single core PVC insulation cables for fixed wiring注：1）电缆相互接触2）相邻电缆中心距离为2倍电缆外径固定敷设用单芯聚氯乙烯绝缘电线连续负荷载流量（A）Current carrying capacity of single core PVC insulation cables for fixed wiring注：1）电缆相互接触2）相邻电缆中心距离为2倍电缆外径连接用聚氯乙烯绝缘软电缆（电线）连续负荷载流量（A）Current carrying capacity of PVC insulation flexible cables (cords) for connecting注：1）电缆相互接触2）相邻电缆中心距离为2倍电缆外径3）电缆分离敷设。
Skived PTFE产品安全信息表说明书
PRODUCT SAFETY INFORMATION SHEET1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THECOMPANY/UNDERTAKINGTRADENAME: SkivedPTFEPRODUCT NUMBERS COVERED: DW 200, DW 201, DW 218, DW 219USE OF ARTICLE: PTFE Film used in industrial, mechanical and electrical applications. DATEISSUED: 04/28/2020COMPANY/UNDERTAKING IDENTIFICATION: DeWAL Industries, Inc.15 Ray Trainor DriveNarrangansett, RI 02882Phone: 401-789-9736Email:******************************2. HAZARDS IDENTIFICATIONCLASSIFICATION OF THE MATERIAL: Not classified as hazardous to OSHA Hazard Communication Standard, 29 CFR 1910.1200.LABELINGREQUIREMENTS: NEEFFECTS OF OVEREXPOSURE: None anticipated with normal handling.INHALATION: Not a likely source of exposure.EYE CONTACT: Not a likely source of exposure.SKIN CONTACT: No known significant effects.INGESTION: Not a likely source of exposure.CHRONIC: NEThis material is produced as an “article” as defined in 20 CFR 1910.1200 and REGULATION (EC) N° 1907/2006 is therefore exempt from the Hazard Communication Standard and REACH. Since this material does not release and will not result in exposure to a hazardous chemical under normal conditions of use, no Safety Data Sheet is required.3. COMPOSITION/INFORMATION ON INGREDIENTSChemicalName CAS No. %Polytetrafluoroethylene 9002-84-0 >994. FIRST-AID MEASURESINHALATION: Remove person to fresh air.EYE CONTACT: If film or process dust gets in eyes, flush with cold water, seek medicalattention.1 of 6SKIN CONTACT: Not a likely medical issue, unless cut by the film, then treat as youwould a normal cut.INGESTION: Not a likely medical issue.5. FIRE-FIGHTING MEASURESFLASHPOINT: Noneo C (o F)FlammableLimits:LEL NA UEL NA AUTOIGNITIONTEMPERATURE: NEo C (o F)EXTINGUISHINGMEDIA: X WaterSprayX Foam X CO2X DryChemical X Other–SPECIAL FIRE FIGHTING PROCEDURES: When conditions are severe and thermal decomposition is possible, wear full protective clothing, including helmet, self-contained positive pressure breathing apparatus, bunker coat and pants, bands around arms and legs, full face mask and protective covering for any exposed areas of the head.UNUSUAL FIRE AND EXPLOSIONHAZARDS:Exposure to extreme heat may give rise to thermal decomposition.6. ACCIDENTAL RELEASE MEASURESPERSONALPRECAUTIONS: Observecautions from other sections of PSIS. Non-hazardous solid.ENVIRONMENTAL PRECAUTIONS: None known.CLEANING METHODS: Sweep or shovel into normal trash. Avoid creation of nuisance dust. 7. HANDLING AND STORAGEHANDLING: When working with this film, it is recommended that you wash yourhands thoroughly before smoking; dust created during processing canget into tobacco products and possibly lead to hazardousdecomposition products.STORAGE: Use normal storage procedures.8. EXPOSURE CONTROLS/PERSONAL PROTECTION8.1 Occupational Exposure Limits (OEL’s)Ingredient CAS # Agency Limit TypePolytetrafluoroethylene 9002-84-0 CMRG TWA(respirable dust): 5 mg/m3;2 of 6ACGIH : American Conference of Governmental Industrial HygienistsAIHA : American Industrial Hygiene AssociationCMRG : Chemical Manufacturer's Recommended GuidelinesOSHA : United States Department of Labor - Occupational Safety and Health AdministrationTWA: Time-Weighted-AverageSTEL: Short Term Exposure LimitCEIL: Ceiling8.2 Exposure ControlsFor any situation where the material might be exposed to extreme overheating, use appropriate local exhaust ventilation to reduce any possible thermal decomposition products. If local ventilation is not possible, userespiratory protection equipment.PROTECTION: None needed under normal conditions. If material is heated and odors RESPIRATORYare noticeable and/or irritating a respirator meeting NIOSHrequirements should be used. A qualified individual should evaluateeach situation.VENTILATIONLOCAL: Recommended for all industrial operations.GENERAL: Recommended for all industrial operations.PERSONALPROTECTIONHAND: Gloves would be recommended to help prevent abrasions and cutsfrom handling the film.EYE: Safety glasses with side-shields are recommended in all industrialoperations.SKIN: Gloves would be recommended to help prevent abrasions and cutsfrom handling the film.THERMAL HAZARDS Unlikely exposure.OTHER: Safety shower/eyewash in the area.9. PHYSICAL AND CHEMICAL PROPERTIESwhitefilmAPPEARANCE: SolidODOR: OdorlessSTATE: SolidPHYSICALo C (o F)BOILINGPOINT: NAMELTING POINT: 320 - 345˚Co C (o F)POINT: NAFREEZINGo C (o F)FLASHPOINT: NoneSOLUBILITY: In-SolubleWATERDENSITY: NAVAPORPRESSURE: NAVAPORSPECIFIC GRAVITY: 2.14 – 2.18 (Ref Std: Water = 1)COEFFICIENT: NAPARTITIONRATE: NAEVAPORATIONDENSITY: 2.14 – 2.18 g/cm3VISCOSITY: NAAUTO-IGNITION TEMPERATURE: No data available.ORGANIC COMPOUNDS: NAVOLATILEDECOMPOSITIONTEMPERATURE: No data available.VOLATILE: NAPERCENTH2O ELEMENT SOLVENT: NALESSVOCPH: NAFLAMMABILITY: NotClassified.3 of 610. STABILITY AND REACTIVITYSTABLEX UNSTABLECONDITIONS TO AVOID: Not determined.MATERIALS TO AVOID: Alkali and Alkaline earth metals.HAZARDOUSPOLYMERIZATION: May Occur X Does Not OccurHAZARDOUSDECOMPOSITIONPRODUCTS:Substance ConditionCarbonyl Fluoride At Elevated Temperatures – above 380˚CCarbon Monoxide At Elevated Temperatures – above 380˚CCarbon Dioxide At Elevated Temperatures – above 380˚CHydrogen Fluoride At Elevated Temperatures – above 380˚CPerfluoroisobutylene(PFIB) AtElevated Temperatures – above 380˚CToxic Vapor, Gas, Particulate At Elevated Temperatures – above 380˚CIf this product is exposed to extreme conditions of heat from misuse or equipment failure, toxic decomposition can occur.11. TOXICOLOGICAL INFORMATIONThis information may not be consistent with the material classification in Section 2 if specific ingredient classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be reflected in the material classification and / or the signs and symptoms of exposure, because an ingredient may be present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be relevant to the material as a whole.11.1 Information of Toxicological EffectsSIGNS AND SYMPTOMS OF OVEREXPOSURE: Based on information on the components, this material may produce the following health effects:Inhalation: Not a likely source of exposure.However, If overheated, Polymer Fume Fever could occur.Signs/Symptoms may include chest pain, shortness of breath, cough,malaise, muscle aches, increased heart rate, fever, chills, sweats,nausea and headache.Skin Contact: Mechanical Skin irritation: Abrasion or cuts from film handling.Eye Contact: Not a likely source of exposure.Ingestion: Not a likely source of exposure.TOXICOLOGICALDATA:Acute Toxicity Name Route ValueOverall Product Ingestion No Data Available.Polytetrafluoroethylene Dermal LD50 estimated to be >5000mg/ kgPolytetrafluoroethylene Ingestion LD50 estimated to be >5000mg/ kg4 of 6Skin IrritationPolytetrafluoroethylene No Significant Irritation.Serious Eye IrritationPolytetrafluoroethylene No Significant Irritation.Skin SensationSensitizing.Polytetrafluoroethylene NotRespiratory Sensationdata.Carcinogenicity Insufficientdata.Reproductive Toxicity Insufficientdata.Target Organs Insufficient 12. ECOLOGICAL INFORMATIONarechemically unreactive, non-toxic, non-water solubleproductsECOTOXICITY: Theseand non- biodegradable.13. DISPOSAL CONSIDERATIONNonePROPERTIESPHYSICAL/CHEMICALAFFECTING DISPOSAL:ENVIRONMENTAL TOXICITY DATA: NAWASTE DISPOSAL METHOD: Dispose of in accordance with applicable federal, state, provincial, andlocal laws and regulations.14. TRANSPORT INFORMATIONUN NUMBER: Not Regulated by DOT, IATA, IMDG, ARDUN PROPER SHIPPING NAME: Not Regulated by DOT, IATA, IMDG, ARDHAZARD CLASS (ES): Not Regulated by DOT, IATA, IMDG, ARDPACKING GROUP: Not Regulated by DOT, IATA, IMDG, ARDENVIRONMENTAL HAZARDS: Not Regulated by DOT, IATA, IMDG, ARD15. REGULATORY INFORMATION15.1 International Regulations: N/A15.2 U.S. Federal Regulations:This product is in compliance with the requirements of TSCA.TSCA(Toxic Substances Control Act):NACERCLA(Comprehensive EmergencyResponse, Compensation, and LiabilityAct):5 of 6SARA TITLE IIINA(Superfund Amendments andReauthorization Act):311/312 HAZARD CATEGORIES: Fire -No Pressure Hazard-No Reactivity-NoImmediate Hazard-No Delayed Hazard-NoINGREDIENTS: None.REPORTABLE31315.3 State Regulations: In compliance with State Regulations.16. OTHER INFORMATIONNA =Not Applicable FILE: 99472-DW 200, DW 201, 218, 219 PSIS-04282020NE = Not EstablishedNC = Not Classified PREPARED BY: Rogers Corporate EHSTHE INFORMATION CONTAINED HEREIN IS BASED ON DATA CONSIDERED ACCURATE. HOWEVER, NO WARRANTY IS EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THESE DATA OR THE RESULT TO BE OBTAINED FROM THE USE THEREOF. ROGERS CORPORATION ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE TO VENDEES, USERS OR THIRD PARTIES CAUSED BY THE MATERIAL. SUCH VENDEES OR USERS ASSUME ALL RISKS ASSOCIATED WITH THE USE OF THE MATERIAL.6 of 6。
美军标 18240
MIL-DTL-18240F2 JUNE 1997SUPERSEDINGMIL-F-18240E1 DECEMBER 1989DETAIL SPECIFICATIONFASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250°F MAXIMUM This specification is approved for use by all Departments and Agencies of the Department of Defense.1. SCOPE1.1 Scope. This specification defines the requirements for self-locking elements for use inexternally threaded fasteners such as bolts and screws to be used in fasteners with either UNC, UNJC, UNF, UNJF, UNRC or UNRF threads and where the temperatures will not exceed 250°F.1.2 Classification. This specification includes three types of self-locking elements as follows:Type N . . . . . Plug/PelletType L . . . . . StripType P . . . . . PatchAMSC N/A FSC 53GP.DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.2. APPLICABLE DOCUMENTS2.1 General. The documents listed in this section are specified in sections 3 and 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements documents cited in sections 3 and 4 of this specification, whether or not they are listed. .2.2 Government document.2.2.1 Specifications Standards and handbooks. The following specifications, standards, andhandbooks form a part of this document to the extent specified herein. Unless otherwisespecified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specification and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2).SPECIFICATIONSFEDERALQQ-P-416-Plating, Cadmium (Electrodeposited).GGG-W-686-Wrench, Torque, Unidirectional.DEPARTMENT OF DEFENSEMIL-S-7742-Screw Threads, Standard, Optimum Selected Series: GeneralSpecification forMIL-S-8879-Screw Threads, Controlled Radius Root with Increased MinorDiameter, General Specification for.STANDARDSFEDERALFED-STD-H28/2-Screw Threads Standards for Federal Services Section 2Unified inch Screw Threads UN and UNR Thread Forms DEPARTMENT OF DEFENSEMIL-STD-1312-7- Fastener, Test Methods, Method 7, VibrationMS15981 - Fasteners, Externally Threaded, Self-locking, Design andUsage Limitations ForAIR FORCE - NAVY AERONAUTICALAN 3 THRU AN 20- Bolt, Machine, Aircraft.(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)2.2.2 Non-Government publications. The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of the documents which are DoD adopted shall be those listed in the issue of the DoDISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS are the issue of the documents cited in the solicitation (see 6.2).AMERICAN SOCIETY FOR QUALITY CONTROL (ASQC)ASQC Z1.4- Sampling Procedures and Tables for Inspection by Attributes (Application for copies should be addressed to AMERICAN SOCIETY FOR QUALITY CONTROL, P.O. Box 3005, 611 E Wisconsin Ave, Milwaukee, WI 53201-4606)AMERICAN SOCIETY OF MECHANICAL ENGINEERSASME B1.1- Unified Inch Screw Threads (UN and UNR Thread Form) (DoD adopted) (Application for copies should be addressed to American Society of Mechanical Engineers (ASME), 22 Law Drive, P.O. Box 2900, Fairfield NJ 07007-2900)NATIONAL AEROSPACE STANDARDS (NAS)NAS 600 THRU NAS 606- Screw, Machine, Aircraft, Pan Head, Cruciform Recess,Full Threaded, Alloy Steel. (DoD adopted) (Application for copies should be addressed to the Aerospace Industries Association ofAmerica, Inc., 1250 Eye Street, N.W., Washington, DC 20005.)AMERICAN SOCIETY FOR TESTING AND MATERIALSASTM D1535-Standard Practice for Specifying Color By The MunsellSystem(Application for copies should be addressed to the American Society for Testing andMaterials, 100 Barr Harbor Drive, W. Conshohocken, PA (19428-2959).2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited herein (except for related associated specifications or specification sheets), the text of this document shall take precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.3. REQUIREMENTS3.1 Qualification. The self-locking elements furnished under this specification shall be products which are authorized by the qualifying activity for listing on the applicable qualified products list (QPL) before contract award (see4.2 and 6.3).3.1.1 Extent of qualification. Qualification approval of external self-locking element in UNF or UNJC external thread constitutes approval of external self-locking element in UNC, UNJC, UNF, UNJF, UNRC, or UNRF external thread of the same diameter.3.2 Design. The self-locking element design shall conform to the types illustrated onfigure 1 and MS15981.3.2.1 Dimensions. The self-locking element dimensions shall be as specified in table I,table IA, and figure 1. In cases of dimensional conflict, the dimensions of table I, table IA and figure 1 shall take precedence over those identified in MS15981.3.3 Performance characteristics.3.3.1 Torque. The self-locking fastener shall conform to the torque test as specified in4.4.2.3.3.2 High temperature torque. The self-locking fastener shall conform to the high temperature torque test in4.4.3.3.3.3 Off prevailing torque at maximum temperature. The self-locking fastener shall meet the off minimum prevailing torque values specified in table II at maximum temperature when tested in accordance with4.4.4.3.3.4 Vibration. The self-locking fastener shall be subjected to and pass the vibration testfor 30,000 cycles as specified in 4.4.5. For qualification purposes, the activity responsible for qualification may waive the vibration requirement for thread sizes greater than .500inch provided the .500inch thread size having the same type locking element has passed the vibration test. The vibration test is not required for thread sizes below .190.3.4 Reusability. The self- locking fastener shall be capable of 5 seated cycles without damage to either the nut or bolt threads (see4.4.2d through f and 4.4.6).3.5 Identification.3.5.1 Self-locking element. The self-locking element shall be identified by color code as identified in ASTM D1535 and in table VIII.3.5.2 Color. Each manufacturer of the products specified herein shall color code theirself-locking elements produced per this specification in accordance with their designated colors identified per QPL-18240.3.6 Workmanship. Workmanship shall be consistent with high-grade commercial practice. Parts are required to be free of burrs and slivers except slight burrs are permissible in the area of the self-locking element provided maximum locking torque values specified in table II are not exceeded.4. VERIFICATION4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:a. Qualification inspection (see 4.2).b. Quality conformance inspection (see 4.3).4.1.1 Responsibility of the self-locking element supplier. The self-locking element supplier shall be responsible for compliance with all the requirements of sections 3 and 4. The seller of the completed fastener shall be responsible for proving that the fastener product has met all the quality conformance inspections of the completed fastener.4.2 Qualification inspection. Qualification inspection shall be performed at a laboratory acceptable to the Government on sample units produced with equipment and procedures normally used in production. Qualification inspections shall be as specified in table VII. Qualification inspection shall be limited to the fasteners shown in tables IV and shall be authorized only upon presentation of certified test reports to the activity responsible for qualification. The test reports shall include actual results of all the tests and a drawing which shows the location, size, material, method of attachment and protrusion of the self-locking element for each diameter upon which qualification is desired. A manufacturer's designation shall be submitted for the locking element to be used in each diameter of fastener. For qualification of sizes up to and including .500" (government designation 80), the manufacturer must submit samples for full testing to be conducted by the qualifying test facility for each individual desired size. For qualification of sizes above .500" nominal diameter size, the manufacturer must submit actual torque test data and samples of the specific size to the qualifying testing facility and must be qualified to the .500" nominal diameter size.4.2.1 Retention of qualification. Certification shall be requested by Naval Air Warfare Center from each manufacturer and forwarded to the preparing activity for those specifications which do not contain a requirement for retention of qualification by testing. Certification shall be at the time of the two year review and shall be signed by a responsible official or management,attesting that the listed product(s) is still available from the listed plant, and is produced under the same conditions as originally qualified; i.e., same process, materials, construction, design, manufacturer's part number, or designation, and meets the requirements of the current issue of the specification. Failure to provide the certification will be cause for removal from the QPL.4.2.2 Sampling instructions. The qualification inspection samples shall consist of 60 fasteners with the self-locking elements conforming to table IV for each diameter for which qualification is desired. All test nuts necessary for the inspections shall conform to tables VA and VB and shall be furnished by the manufacturer. Samples shall be identified as required and forwarded to the activity designated in the letter of authorization from the activity responsible for qualification (see 6.3).4.3 Quality conformance inspection. Prior to installation of the self-locking element, the quality conformance inspections of the applicable fastener specification shall be met. In addition, after installation of the self-locking element on to the applicable fastener, the quality conformance inspections specified in table VI shall be met. Also, the self-locking fastener shall meet any other tests which are considered necessary by the procuring activity to determine conformance with the requirements of this specification. Any rework of the fastener as defined by the Fastener Quality Act shall require retesting.4.3.1 Sampling. For the quality conformance inspections specified herein, the sample self-locking fasteners shall be selected at random from each finished lot as specified in 4.3.1.1. Group A quality conformance inspection sampling shall be in accordance with ANSI/ASQZ 1.4-1993, single sampling inspection, Level II, of zero acceptance level.Group B torque inspection sampling shall be in accordance with the sampling plan in table IX orX at the supplier’s option.4.3.1.1 Lot. A lot shall consist of finished fasteners with the self-locking element incorporated which are of the same diameter and length, fabricated by the same process, heat treated in the same manner, and produced as one continuous run or order or part thereof, whichever is of the smaller quantity.4.4 Methods of inspection.4.4.1 Examination of product. The self-locking fastener shall be examined for the following items before any other tests are conducted..a. Presence of self-locking element.b. Location of self-locking element.c. Dimensions of self-locking element.d. Presence of burrs and slivers (see 3.6).e. Identification of product.4.4.2 Torque test. For qualification testing 10 sample fasteners with self-locking elements installed as specified in table IV shall be tested with the test nuts specified in tables VA and VB. For quality conformance purposes, the bolts shall be as specified in the applicable document which requires a self-locking element per MIL-DTL-18240 and the test nut shall be as specified in table VA and VB for the correct thread type. The following test shall be performed:NOTE: Parts that can not be seated shall be tested unseated.a. Prior to the actual testing of self-locking screws and bolts, a test nut asspecified in table VA and table VB with the same thread form, class and pitch,shall be gauged with a go and no go threaded plug gage. The test nut shall notaccept the no go gage for more than 1.5 turns and shall freely accept the go gagefor the entire length of the nut. The minor thread diameter shall also be checkedfor conformance with table VA and VB.b. A light lubricating oil shall be applied directly to the locking element prior totorque testing, unless otherwise specified. ( see 6.4.1)c. The torque shall be measured using a calibrated torque wrench in accordancewith GGG-W-686 or a digital torque sensor capable of measuring the torquevalues encountered during the test. (see 6.4.2)d. A self-locking fastener shall be assembled with hardened spacers, or washers asnecessary, and a test nut. The total thickness of the spacers and washers for thetest assembly shall be selected so that the locking element of the self-lockingfastener is fully engaged in the test nut. Set screws shall be tested in a blind hole.If the self-locking fastener is turned, the restraining mechanism shall be such that itimparts no radial load to the nut.For testing of self-locking fastener withoutsufficient thread length for a locking element in accordance with table I or forthread sizes not covered in table II only a positive indication of off prevailingtorque is required for five cycles. Sufficient thread length is eight threads (onecomplete thread pitch, plus five complete thread pitches for the locking element,plus two run-out pitches for ease of starting, for a total of eight threads minimum.)Sufficient thread length may be calculated as follows:Sufficient Thread Length = 18 PXWhere P = Thread Pitch EXAMPLE: .250-28 ThreadSufficient Thread Length = 1288286X in=.e. First cycle test: During the first tightening of the assembly, the 1st cycle ONPREVAILING TORQUE (see 6.5) shall be measured and recorded.. Tighteningshall be continued until the required SEATING TORQUE (see 6.5) as specified intable II for the applicable thread size and pitch is developed. The axial clamp loadshall be reduced to zero by backing the self-locking fastener or test nut off, untilthe spacers are free to rotate. Following the removal of the axial clamp load, the1st cycle OFF PREVAILING TORQUE (see 6.5) shall be measured during thenext 360 degrees of rotation and recorded. The self-locking fastener and test nutshall be disassembled until the locking element is disengaged. The driving speedshall not exceed 30 RPM.f. Second through fifth cycle tests: The self-locking fastener and test nut shall bereassembled, seated, and disassembled four more times following the sameprocedure as the 1st cycle test. The ON and OFF PREVAILING TORQUE shallbe measured and recorded for each cycle. Sufficient time shall elapse betweentorquing cycles to prevent overheating of the test assembly. During the torque testthe temperature shall not be grater than 75°F above the starting temperature.g. For qualification testing any torque value determined to be in excess of thelimitations of table II constitutes failure of this test. For quality conformancetesting determine whether the lot passes or fails in accordance with table IXor table X.4.4.3 High temperature torque.a. Assemble ten new fasteners as tested in 4.4.2, steps a through d and the on cycle ofstep e.b. Bake the assemblies to 250°F ±10° for 3 hours.c. Air cool the assemblies to room temperature for a minimum of 1 hour.d. Test the torque values as indicated in 4.4.2, steps e through f, starting with the firstOFF PREVAILING TORQUE. Any torque determined in this test to be in excessof 150 percent of the maximum prevailing torque values in table II or not meetingthe minimum prevailing torque in table II constitutes failure of this test.4.4.4 OFF PREVAILING TORQUE at maximum temperature.a. Assemble the same ten fasteners used in paragraph 4.4.3.b. Bake the assemblies for one hour to 250°F ±10°.c. While the fastener is still at 250°F, determine that the OFF PREVAILING TORQUEvalue shall not be less than the minimum prevailing torque value listed in table II.4.4.5 Vibration. Sample nuts and bolts of the size and quantities specified in table III shall be subjected to the vibration test specified in MIL-STD-1312-7, Vibration. The sample nuts and bolts shall be assembled to the specified torque in table III and disassembled 4 times, then reassembled and tested. The fastener assembly shall traverse the entire length of the slots in the test fixture during the test.4.4.5.1 Vibration failure conditions. The self-locking element shall have failed the vibration test for any of the following conditions:a. When any structural failure occurs in the fastener in the region of the self-lockingelement during the vibration test such as a crack intersecting the region of thethreads containing the self-locking element.b. When any nut rotates greater than 360° during 30,000 cycles.c. When any nut can be turned completely on or off the bolt or screw, with the fingers,during or after completion of 30,000 cycles.4.4.6 Reusability. At the conclusion of the tests specified in 4.4.2 (and 4.4.3 and 4.4.4 for qualification testing), the test nuts and self-locking fasteners used in this test shall be examined for damage to the threads. Noticeable distortion or scratches deep enough to reduce the efficiency of the threads shall be considered a failure of the self-locking element. The threads shall remain in serviceable condition and permit the installation of a new self-locking fastener or test nut (as applicable) freely with the fingers up to the self-locking element.4.4.7 Noncompliance. If a sample fails to pass Group B inspection of table VI, the manufacturer shall notify the qualifying activity and the cognizant inspection activity of such failure and take corrective action on the materials or processes, or both, as warranted, and on all units of products which can be corrected and which are manufactured under essentially the samematerials and processes, and which are considered subject to the same failure. Acceptance and shipment of the product shall be discontinued until corrective action, acceptable to the inspection activity has been taken. After corrective action has been taken, Group B inspection shall be repeated on additional sample units (all tests and examinations, or the test which the original sample failed, at the option of the qualifying activity). Groups A and B inspections may be reinstituted; however, final acceptance and shipment shall be withheld until the Group B inspection has shown that the corrective action was successful. In the event of failure after reinspection, information concerning the failure shall be furnished to the cognizant inspection activity and the qualifying activity.5. PACKAGING5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or order (see6.2). When actual packaging of material is to be performed by DoD personnel, these personnel need to contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements are maintained by the Inventory Control Point’s packaging activity within the Military Department or Defense Agency, or within the Military Department’s System Command. Packaging data retrieval is available from the managing Military Department’s or Defense Agency’s automated packaging files, CD-ROM products or by contacting the responsible packaging activity.6. NOTES.(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory).6.1 Intended use. The self-locking elements covered by this specification are intended to be incorporated in external screw threads to be used in applications where maximum temperature does not exceed 250°F. When these self-locking elements are incorporated in external threads and are used in compliance with MS15981, all the configurations of figure 1 are interchangeable Type N element, plug/pellet configuration is intended to be installed via a hole drilled into the fastener. Type L element, strip configuration is intended to be installed via a strip cut through the threads parallel to the length of the fastener. Type P element, patch configuration is intended to be installed without removal of any material of the fastener.A specific type should be specified only when required by design or application requirements. The prevailing-torque values given in this specification are conformance requirements for self-locking elements and apply only to the combination of test conditions described in the locking torque test procedure. If the conditions of the actual service application differs from those of 4.4.2 (e.g. internally threaded hole in a different material, length of thread engagement, class of internal thread tolerance, speed of driving, different plating or coating on screw or mating part) the prevailing-torque values may vary. Such values can only be determined through testing the locking element in its application. The plug/pellet is not recommended for sizes below .190.6.1.1 Cross reference.From Configurations listed in Revision D dated 25 February 1972Configuration A plug /pellet type superceeded by Type NConfiguration B strip type superceeded by Type LConfiguration B patch type superceeded by Type P6.2. Acquisition requirements. Acquisition documents must specify the following:a. Title, number, and date of this specification.b. Issue of DODISS to be cited in the solicitation.c. Type (see 1.2, table I and figure 1).d. Part number in accordance with the applicable standard.e. Packaging requirements (see 5.1).6.3 Qualification. With respect to products requiring qualification, awards will be made only for products which are, at the time of award of contract, qualified for inclusion in qualified products list QPL-18240, whether or not such products have actually been so listed by that date. The attention of the contractors is called to these requirements, and manufacturers are urged to arrange to have the products that they propose to offer to the Federal Government tested for qualification in order that they may be eligible to be awarded contracts or purchase orders for the products covered by this specification. Information pertaining to qualification of products may be obtained from the Naval Air Warfare Center Air Craft Division, Code 435200A, Bldg 2187, 48110 Shaw Rd., Unit 5, Patuxent River MD, 20670-1906.6.3.1 Qualification evaluation. Qualification inspection and evaluation of type N (see figure 1) locking element designs were based on the protrusion of the element being in accordance with figure 1, dimension "B". Type N designs with protrusion of "B + 0.007 inch and design that are otherwise the same as listed, also have qualification approval. To identify the element design with greater protrusion of the dimension "B + 0.007inch, figure 1 of this specification, the additional +0.007 inch protrusion must be specified on the standard or drawing for the part, for nonstandard parts that require a specific configuration, add a "P" to the government designation.6.4 Torque test notes6.4.1 A light oil such as Rainkote 400 or equivalent is used in the test (4.4.2) of fasteners to reduce wear, prevent galling or seizure, prevent fretting, and aid in the installation and removal of fasteners. A minimum amount may be used. This will give more consistent torque test results.6.4.2 Some torque measuring devices, such as beam wrenches, could be 20-40% off on the lower 20 percent of the scale and should not be used.6.5 Definitions.6.5.1 Self-locking externally or internally threaded fastener(s). In this specification a"self-locking externally threaded fastener" refers to bolts, or screws, that incorporate self-locking elements conforming to this specification.6.5.2 ON PREVAILING TORQUE. The maximum torque occurring while the fastener is being installed and prior to development of any axial clamp load.6.5.3 SEATING TORQUE. The torque required to overcome the self-locking feature and produce an axial clamp load to the test assembly.6.5.4 OFF PREVAILING TORQUE. The maximum torque occurring while the fastener is in motion during the first 360 degrees of rotation in the untighting direction after the test assembly has been unseated.6.6 Subject term (keyword) listing..Plug/PelletStripPatch6.7 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.6.8 Previously manufactured product. Product manufactured prior to the date of this specification may be used until the supply is exhausted.TABLE I Self-locking element dimensions. (see figure 1)1/ Plug/Pellet is not recommended for sizes below .190.2/ Screws .500 inch and larger may have two self-locking elements. They shall not be more than 120 degrees of thread diameter apart.Table IA Screw and bolt slot and hole depths for self-locking strips and pellets.TABLE II Torque. 1/ 3/1/ These values apply to MIL-S-8879, MIL-S-7742, ASME B1.1, and FED-STD-H28/2 threads. They do not apply to Class 1A threads.2/ These values are for testing only, and are NOT recommended installation torque values. 3/ Values for coarse and fine threads are the same.TABLE III. Vibration requirements.TABLE IV. Length and diameter of self-locking fasteners requiredfor qualification inspection.TABLE VA. Dimensions of nuts required for qualification and conformance tests (inches) 1/ 2/ 3/ 4/ 5/UNF, UNJF, UNC, UNJC THREAD FORMSNotes: 1/ Material: 300 series stainless steel.2/ The nut minor diameter finish shall be 63 MI or better.3/ Nut thread dimensions not listed in table VA shall conform to MIL-S-8879 for class 3B threads Threads shall be cut not formed.4/ For thread sizes above .437 diameter see table VB.5/ Test nuts manufactured to MIL-F-18240 Revision E may be used until 1 year from the date of this specification. The test nuts specified in Revision E must be used in accordance with therequirements of Revision E.TABLE VB. Dimensions of nuts required for qualification and conformance tests (inches) 1/ 2/ 3/ 4/ 5/Notes: 1/ Material: 300 series stainless steel.2/ The nut minor diameter finish shall be 63 MI or better.3/ Nut thread dimensions not listed in table VB shall conform to MIL-S-8879 for class 3Bthreads. Threads shall be cut not formed.4/ For thread sizes less than .500 diameter see table VA.6/Test nuts manufactured to MIL-F-18240 Revision E may be used until 1 year from the date of this specification. The test nuts specified in Revision E must be used in accordance with therequirements of Revision E。
7834ANH - Belden Category 6+ UTP Cable说明书
7834ANH - Belden Category 6+ UTP CableDescription:23 AWG solid bare copper conductors, non-plenum, Polyolefin insulation, twisted pairs, central spline, rip cord, see color code chart (below), LSZH jacket (blue or grey).SUITABLE APPLICATIONS:Suitable Applications Premise Horizontal Cable, Gigabit Ethernet, 100BaseTX, 100BaseVGANYLAN, 155A TM, 622A TM, NTSC/PAL Component or CompositeVideo, AES/EBU, Digital Video, RS-422, 250MHz Category 6 PHYSICAL CHARACTERISTICS:CONDUCTOR:Number of Pairs 4Total Number of Conductors 8AWG 23Stranding SolidConductor Material BC - Bare CopperINSULATION:Insulation Material PO - PolyolefinPair Color Code Chart:Pair Number Insulation ColorWire 1 Wire 21 Blue White with Blue Markings2 Orange White with Orange Markings3 Green White with Green Markings4 Brown White with Brown Markings OVERALL CABLING:Overall Cabling Fillers Central SplineOUTER SHIELD:Outer Shield Material UnshieldedOUTER JACKET:Outer Jacket Material LSNH – Low Smoke Non-Halogen7834ANH - Belden Category 6+ UTP CableOuter Jacket Ripcord YesOVERALL NOMINAL DIAMETER:Overall Nominal Diameter 6.1 mmMECHNICAL CHARACTERISTICS:Operating Temperature Range - 20℃To + 75℃Bulk Cable Weight 65 kg/kmMax. Recommended Pulling Tension 110 NMin. Bend Radius (Install) 24.4 mmAPPLICABLE SPECIFICATION AGENCY COMPLIANCE:APPLICABLE STANDARDS:NEC/(UL) Specification UL444IEC Specification 11801 Category 6EU RoHS Compliant (Y/N) YEU RoHS Compliance Date Sept 2007TIA Specification 568-C.2 Category 6Other Specification NEMA WC-63.1 Category 6FLAME TEST:IEC Flame Test 60332-1 FlammabilitySUITABILITY:Suitability – Indoor (Y/N) YSuitability - Outdoor (Y/N) NSunlight Resistance (Y/N) NOil Resistance NNon-halogenated YPLENUM/NON-PLENUM:Plenum (Y/N) NELECTRICAL CHARACTERISTICS:Nom. Mutual Capacitance @ 1 KHz 5.6 nF/100mMaximum Capacitance Unbalance 330 pF/100mNominal Velocity of Propagation 70 %Maximum Delay @ 100 MHz 538 ns/100mMaximum Delay Skew 45 ns/100m************************************9.38 Ohms/100m************************************ 6.9 Ohms/100m*************************** 5 %7834ANH - Belden Category 6+ UTP Cable7834ANH - Belden Category 6+ UTP CableNOTES:Notes Jacket sequentially marked.Typical Values are for reference only.PUT-UPS AND COLORS:Item Description Put-Up (ft.) Ship Weight (lbs.) Jacket Color7834ANH 006A1000 4 PR #23 PO LSNH A1000 38 BLU7834ANH 008A1000 4 PR #23 PO LSNH A1000 38 GRYRevision Number: 2 Revision Date: 18/11/2015___________________________________________________________________________________________©Copyright 2015 Belden, IncAll Rights Reserved.Although Belden ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.All sales of Belden products are subject to Belden's standard terms and conditions of sale.Belden believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment For Wire & amp; Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan2003); Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.Belden declares this product to be in compliance with EU LVD (Low V oltage Directive 73/23/EEC), as amended by directive 93/68/EEC.。
Perkadox 14-40B-PD-S 产品数据表说明书
Product Data SheetPerkadox 14-40B-PD-S Di(tert-butylperoxyisopropyl) benzenePerkadox® 14-40B-PD-S is a 40% formulation on an inert carrier system in powder form.CAS number2212-81-9, 25155-25-3EINECS/ELINCS No.218-664-7TSCA statuslisted on inventoryMolecular weight338.5Active oxygen contentperoxide9.45%Concentration3.7-3.9%SpecificationsAppearance Off-white powderAssay39.0-41.0 %ApplicationsPerkadox® 14-40B-PD-S is a bifunctional peroxide which is used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins. Rubber compounds containing Perkadox® 14-40B-PD-S have excellent scorch safety, and under certain conditions one step mixing is possible. Safe processing temperature: 135°C (rheometer ts2 > 20 min.). Typical crosslinking temperature: 175°C (rheometer t90 about 12 min.).Thermal stabilityOrganic peroxides are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test.SADT80°CMethod The Heat Accumulation Storage Test is a recognized test method for thedetermination of the SADT of organic peroxides (see Recommendations on theTransport of Dangerous Goods, Manual of Tests and Criteria - United Nations, NewYork and Geneva).StorageDue to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To minimize the loss of quality, Nouryon recommends a maximum storage temperature (Ts max.) for each organic peroxide product.Ts max.30°CNote When stored under strictly recommended storage conditions, Perkadox® 14-40B-PD-S will remain within the Nouryon specifications for a period of at least 12months after delivery.Packaging and transportThe standard packaging is a cardboard box for 25 kg peroxide formulation. Both packaging and transport meet the international regulations. For the availability of other packed quantities consult your Nouryon representative. Perkadox®14-40B-PD-S is classified as Flammable solid, class 4. 1, UN 1325.Safety and handlingKeep containers tightly closed. Store and handle Perkadox® 14-40B-PD-S in a dry well-ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room. Avoid contact with reducing agents (e. g. amines), acids, alkalines and heavy metal compounds (e. g. accelerators, driers and metal soaps). Please refer to the Safety Data Sheet (SDS) for further information on the safe storage, use and handling of Perkadox® 14-40B-PD-S. This information should be thoroughly reviewed prior to acceptance of this product. The SDS is available at /sds-search.Major decomposition productsMethane, Acetone, tert-Butanol, Di(2-hydroxyisopropyl)benzene, Diacetylbenzene, Acetyl 2-hydroxyisopropyl benzeneAll information concerning this product and/or suggestions for handling and use contained herein are offered in good faith and are believed to be reliable.Nouryon, however, makes no warranty as to accuracy and/or sufficiency of such information and/or suggestions, as to the product's merchantability or fitness for any particular purpose, or that any suggested use will not infringe any patent. Nouryon does not accept any liability whatsoever arising out of the use of or reliance on this information, or out of the use or the performance of the product. Nothing contained herein shall be construed as granting or extending any license under any patent. Customer must determine for himself, by preliminary tests or otherwise, the suitability of this product for his purposes.The information contained herein supersedes all previously issued information on the subject matter covered. The customer may forward, distribute, and/or photocopy this document only if unaltered and complete, including all of its headers and footers, and should refrain from any unauthorized use. Don’t copythis document to a website.Perkadox® is a registered trademark of Nouryon Functional Chemicals B. V. or affiliates in one or more territories.Contact UsPolymer Specialties Americas************************Polymer Specialties Europe, Middle East, India and Africa*************************Polymer Specialties Asia Pacific************************2022-12-5© 2022Polymer crosslinking Perkadox 14-40B-PD-S。
744710215;中文规格书,Datasheet资料
5.1 5.0 4.02012-06-272012-05-022009-06-30SStSStRStSStCZWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-SDof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical wave soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744710215。
LA1824资料
Block Diagram
FM Ant B.P.F
24
23
22
21
20
GND2 FM
RF
VCC2
FM OSC
FM MIX
+
19
18
TRIG
ST SW
+
+
R-OUT
L-OUT
AM FM
MN ST
17
16
DECODER
VCO
FF
15
14
PHASE COMP
FF
FF
PILOT DET
13 DET
LA1824
Overview
PackageБайду номын сангаасDimensions
The LA1824 is a single-chip tuner IC that incorporates FM/AM and MPX circuits. The built-in MPX-VCO allows this IC to be adjustment free and to require no external components.
AM MIX
AM
RF
AM
REG
OSC
VCC1
GND1
S-METER
DET
AGC
TUN
ST
LED
LED
FM IF
AM-IF
1
2
3
4
5
6
7
8
9
10
11
12
AM Ant +
AM / FM TUN
FM ST
10.7MHz +
AO3401A中文资料
SymbolTyp Max 659085125R θJL 4380Maximum Junction-to-Lead CSteady-State°C/WThermal Characteristics ParameterUnits Maximum Junction-to-Ambient AF t ≤ 10s R θJA °C/W Maximum Junction-to-Ambient A Steady-State °C/W AO3401AAO3401ASymbolMin TypMaxUnits BV DSS -30V -1T J =55°C-5I GSS ±100nA V GS(th)-0.6-1-1.3V I D(ON)-25A 3644T J =125°C52634455m Ω6280m Ωg FS 13S V SD -0.75-1V I S-2A C iss 9331200pF C oss 108pF C rss 81pF R g69ΩQ g 9.312.2nC Q gs 1.5nC Q gd 3.7nC t D(on) 5.2ns t r 6.8ns t D(off)42ns t f 15ns t rr 2128ns Q rr14.3nCTHIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN,FUNCTIONS AND RELIABILITY WITHOUT NOTICE.Body Diode Reverse Recovery TimeBody Diode Reverse Recovery Charge I F =-4.3A, dI/dt=100A/µsDrain-Source Breakdown Voltage On state drain currentI D =-250µA, V GS =0V V GS =-2.5V, I D =-2.5AV GS =-4.5V, V DS =-5V V GS =-10V, I D =-4.3AReverse Transfer Capacitance Electrical Characteristics (T J =25°C unless otherwise noted)STATIC PARAMETERS ParameterConditions I DSS µA Gate Threshold Voltage V DS =V GS I D =-250µA V DS =-30V, V GS =0VV DS =0V, V GS =±12V Zero Gate Voltage Drain Current Gate-Body leakage current R DS(ON)Static Drain-Source On-ResistanceForward TransconductanceDiode Forward Voltage m ΩV GS =-4.5V, I D =-3.5A I S =-1A,V GS =0V V DS =-5V, I D =-4.3AI F =-4.3A, dI/dt=100A/µsV GS =0V, V DS =-15V, f=1MHz SWITCHING PARAMETERS Total Gate Charge V GS =-4.5V, V DS =-15V, I D =-4.3AGate Source Charge Gate Drain Charge Turn-On Rise Time Turn-Off DelayTime V GS =-10V, V DS =-15V, R L =3.5Ω, R GEN =6ΩGate resistanceV GS =0V, V DS =0V, f=1MHzTurn-Off Fall TimeMaximum Body-Diode Continuous CurrentInput Capacitance Output Capacitance Turn-On DelayTime DYNAMIC PARAMETERS A: The value of R θJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The value in any given application depends on the user's specific board design. B: Repetitive rating, pulse width limited by junction temperature.C. The R θJA is the sum of the thermal impedence from junction to lead R θJL and lead to ambient.D. The static characteristics in Figures 1 to 6 are obtained using <300 µs pulses, duty cycle 0.5% max.E. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25°C. The SOA curve provides a single pulse rating.F.The current rating is based on the t ≤ 10s thermal resistance rating.Rev0: Apr.2007AO3401AAO3401A。
罗弗公司2010年版低功耗高电压负压电子传输器2SB1182和2SB1240产品说明书
Medium power transistor (-32V, -2A)2SB1182 / 2SB1240●Features1) Low V CE(sat).V CE(sat) = -0.5V (Typ.) (I C /I B = -2A / -0.2A)2) Complements 2SD1758 / 2SD1862.●StructureEpitaxial planar type PNP silicon transistor●Absolute maximum ratings (Ta=25︒C)∗1 Single pulse, Pw =100ms∗2 Printed circuit board, 1.7mm thick, collector copper plating 100mm 2or larger.ParameterV CBO V CEO V EBO P C Tj Tstg−40V V V A(DC)W (Tc =25°C )W°C °C−32−5−2I CA (Pulse)−3101∗1∗22SB11822SB1240150−55 to 150Symbol Limits Unit Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector currentCollector power dissipationJunction temperature Storage temperature●Electrical characteristics (Ta=25︒C)∗ Measured using pulse current.ParameterSymbol BV CBO BV CEO BV EBO I CBO I EBO h FE V CE(sat)f T CobMin.−40−32−5−−120−−−−−−−−10050−−−−1−1390−0.8∗∗−−V I C = −50μA I C = −1mA I E = −50μA V CB = −20V V EB = −4V I C /I B = −2A/ −0.2A V CE = −5V, I E =0.5A, f =100MHz V CB = −10V, I E =0A, f =1MHzV VμA μA −−V CE = −3V, I C = −0.5AV MHz pFTyp.Max.Unit Conditions−0.5Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff currentCollector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance●Packaging specifications and h FEPackage CodeBasic ordering unit (pieces)TapingTL 2500h FE QR 2SB1182−TV22500−QR2SB1240Typeh FE values are classified as follows :Item h FEQ 120 to 270R 180 to 390●Electrical characteristic curvesFig.1 Grounded emitter propagationcharacteristicsBASE TO EMITTER VOLTAGE : V BE (V)C O L L E C T O R C U R R E N T : I C (m A )−−−−−−−−−−Fig.2 Grounded emitter outputcharacteristics−−−−−C O L LE C T O R C U R R E N T : I C (A )COLLECTOR TO EMITTER VOLTAGE : V CE (V)Fig.3 DC current gain vs.collector curren ( )D C C U R RE N T G A I N : hF ECOLLECTOR CURRENT : I C (mA)Fig.4 DC current gain vs.collector current ( )D C C U R RE N T G A I N : hF ECOLLECTOR CURRENT : I C (mA)Fig.5 Collector-emitter saturationvoltage vs. collector current ( )C O L L E C T O R S A T U R A T I O N V O L T A G E : V C E (s a t ) (m V )−−−−Fig.6 Collector-emitter saturationvoltage vs. collector current ( )−−−−−C O L L E C T O R S A T U R A T I O N V O L T A G E : V C E (s a t ) (m V )COLLECTOR CURRENT : I C (mA)Fig.7 Base-emitter saturation voltagevs. collector currentCOLLETOR CURRENT : I C (mA)B A S E S A T U R A T I O N V O L T A G E : V B E (s a t )(V )−−−−−Fig.8 Gain bandwidth product vs.emitter currentEMITTER CURRENT : I E (mA)T R A N S I T I O N F R E Q U E N C Y : f T (M H z )Fig.9 Collector output capacitance vs.collector-base voltageEmitter input capacitance vs. emitter-base voltageCOLLECTOR TO BASE VOLTAGE : V CB (V)EMITTER TO BASE VOLTAGE : V EB (V)C O L L E C T O R O U T P U T C A P AC I T A N C E : C o b (p F )E M I T T E R I N P U T C A P A C I T A N C E : C i b (p F )Fig.10 Safe operation area(2SB1182)−−−−−−−−−−C O L L E C T O R C U R R E N T : I C (A )COLLECTOR TO EMITTER VOLTAGE : V CE (V)NoticeN o t e sNo copying or reprod uction of this d ocument, in part or in whole, is permitted without theconsent of ROHM Co.,Ltd.The content specified herein is subject to change for improvement without notice.The content specified herein is for the purpose of introd ucing ROHM's prod ucts (hereinafter"Products"). If you wish to use any such Product, please be sure to refer to the specifications,which can be obtained from ROHM upon request.Examples of application circuits, circuit constants and any other information contained hereinillustrate the standard usage and operations of the Products. The peripheral conditions mustbe taken into account when designing circuits for mass production.Great care was taken in ensuring the accuracy of the information specified in this document.However, should you incur any d amage arising from any inaccuracy or misprint of suchinformation, ROHM shall bear no responsibility for such damage.The technical information specified herein is intended only to show the typical functions of andexamples of application circuits for the Prod ucts. ROHM d oes not grant you, explicitly orimplicitly, any license to use or exercise intellectual property or other rights held by ROHM andother parties. ROHM shall bear no responsibility whatsoever for any dispute arising from theuse of such technical information.The Products specified in this document are intended to be used with general-use electronicequipment or devices (such as audio visual equipment, office-automation equipment, commu-nication devices, electronic appliances and amusement devices).The Products specified in this document are not designed to be radiation tolerant.While ROHM always makes efforts to enhance the quality and reliability of its Prod ucts, aProduct may fail or malfunction for a variety of reasons.Please be sure to implement in your equipment using the Products safety measures to guardagainst the possibility of physical injury, fire or any other damage caused in the event of thefailure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHMshall bear no responsibility whatsoever for your use of any Product outside of the prescribedscope or not in accordance with the instruction manual.The Prod ucts are not d esigned or manufactured to be used with any equipment, d evice orsystem which requires an extremely high level of reliability the failure or malfunction of whichmay result in a direct threat to human life or create a risk of human injury (such as a medicalinstrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of anyof the Prod ucts for the above special purposes. If a Prod uct is intend ed to be used for anysuch special purpose, please contact a ROHM sales representative before purchasing.If you intend to export or ship overseas any Product or technology specified herein that maybe controlled under the Foreign Exchange and the Foreign Trade Law, you will be required toobtain a license or permit under the Law.Thank you for your accessing to ROHM product informations.More detail product informations and catalogs are available, please contact us.ROHM Customer Support System/contact/。
1824492资料
Extract from the onlinecatalogMSTBU 2,5/16-ST-5,08-FLOrder No.: 1824492The illustration shows a 15-position versionhttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1824492Plug component, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08 mm, no. of positions: 16, type of connection: Screw connectionhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmDimension a76.2 mmNumber of positions16Screw thread M 3Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2)320 V Rated voltage (II/2)630 V Connection in acc. with standard EN-VDE Nominal current I N12 A Nominal voltage U N250 V Nominal cross section 2.5 mm2 Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A3 Stripping length7 mmConnection dataConductor cross section solid min.0.2 mm2 Conductor cross section solid max. 2.5 mm2 Conductor cross section stranded min.0.2 mm2 Conductor cross section stranded max. 2.5 mm2 Conductor cross section stranded, with ferrule0.25 mm2 without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2 with plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 with plastic sleeve max.2 conductors with same cross section, solid min.0.2 mm2 2 conductors with same cross section, solid max. 1 mm22 conductors with same cross section, stranded0.2 mm2 min.2 conductors with same cross section, stranded1.5 mm2 max.2 conductors with same cross section, stranded,0.25 mm2 ferrules without plastic sleeve, min.2 conductors with same cross section, stranded,1 mm2ferrules without plastic sleeve, max.2 conductors with same cross section, stranded,0.5 mm2TWIN ferrules with plastic sleeve, min.2 conductors with same cross section, stranded,1 mm2TWIN ferrules with plastic sleeve, max.Conductor cross section AWG/kcmil min.24Conductor cross section AWG/kcmil max12Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil28-12CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-12ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-12Certification CB, CSA, CUL, GOST, UL, VDE-PZIAccessoriesItem Designation DescriptionAssembly1808353FLRP/ICV 80Pair of guide rails, is inserted into the groove ICV/...G, height: 86mm, hole diameter: 3.4 mmGeneral1733169EBP 2- 5Insertion bridge, fully insulated, for plug connectors with 5.0 or5.08 mm pitch, no. of positions: 2Marking0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocksPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating materialTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAdditional productsItem Designation DescriptionGeneral1759156MSTB 2,5/16-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 16, mounting: Soldering1757381MSTBA 2,5/16-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 16, mounting: SolderingDrawingsDrilling diagramDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。
74270032;中文规格书,Datasheet资料
Bezeichnung :description :Eigenschaften / properties Wert / valueEinheit / unitTol.Impedanz @ 1 Wg./impedance @ 1 turn Impedanz @ 1 Wg./impedance @ 1 turnImpedanz @ 2 Wg./impedance @ 2 turn Impedanz @ 2 Wg./impedance @ 2 turn33%+ 20°C+ 150°C <= 4,6SMU Update 06-06-28LF RoHS update 04-10-11RTUpdate 02-04-17JH Neugestaltung00-12-06NameÄnderung / modificationDatum / dateAWG26 - ø 0,5mm - Länge/length:165 mm100 MHz25 MHz 25 MHz typ.± 25%Z typ.................................................................................................................................................................................................................................................Würth ElektronikZ255Z D Prüfgeräte / test equipment:HP 4191 B für/for Z und/and material 16092A - Klemme / clamp 703100 MHzΩ± 25%170ΩAXIAL FERRITE BEADSWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked 1.001ZΩBasismaterial / base material:Curietemperatur / curie temperature: ΩDatum / date............................................................................Unterschrift / signature Kontrolliert / approvedTestbedingungen / test conditionsBetriebstemp. / operating temperature: -25°C ~ + 85°CF Werkstoffe & Zulassungen / material & approvals:4 W 620für Kabeldurchmesser / for cable diameter:Lagertemperatur / storage temperature: -55°C ~ + 85°C Kunde / customerFreigabe erteilt / general release:CB Elektrische Eigenschaften / electrical properties:E Testbedingungen / test conditions:Luftfeuchtigkeit / humidity:Umgebungstemperatur / temperature:G Eigenschaften / general specifications:Bezeichnung :description :A:B:SMU Update 06-06-28LF RoHS update 04-10-11RTUpdate 02-04-17JH Neugestaltung00-12-06NameÄnderung / modificationDatum / dateH Impedanzverlauf / impedance curve:2 x durch Bohrung Ferrit / 2 x times through ferrite 1 x durch Bohrung Ferrit / 1 x times trough ferriteFreigabe erteilt / general release:Kunde / customerD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Würth Elektronik eiSos GmbH & Co. KGDATUM / DATE : 2006-06-28AXIAL FERRITE BEADS..................................................................................Datum / dateUnterschrift / signature Würth Elektronik..........................................................................................................................................................................................................................................Geprüft / checked Kontrolliert / approvedThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety andreliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 74270032。
2n4403-datasheet.pdf-数据表说明书
2010-5ELECTRICAL CHARACTERISTICS ( @ T A = 25C unless otherwise noted)MAXIMUM TATINGES ( @ T A = 25C unless otherwise noted)Notes :CHARACTERISTICSSYMBOL UNITS417oC/WThermal Resistance Junction to AmbientRATINGSMax. Steady State Power Dissipation (1) @TA=25oC Derate above 25CMax. Operating Temperature Range Storage Temperature RangeSYMBOL P D T J T STGR q JAVALUE MAX.-TYP.-MIN.UNITS mW6001. Alumina=0.4*0.3*0.024in.99.5% alumina2. "Fully ROHS Compliant", "100% Sn plating (Pb-free)".150-55 to +150o C oCTRANSISTOR(PNP)ELECTRICAL CHARACTERISTICS(@TA=25O C unless otherwise noted)OFF CHARACTERISTICSON CHARACTERISTICS (1)ChatacteristicCollector-Emitter Breakdown Voltage(1) (I C = -1.0 mAdc, I B = 0) Collector-Base Breakdown Voltage (I C = -0.1mAdc, I E = 0)Emitter-Base Breakdown Voltage (I E = -0.1mAdc, I C = 0)Base Cutoff Current (V CE = -35Vdc, V BE(off)= -0.4Vdc)Collector Cutoff Current (V CE = -35Vdc, V EB = -0.4Vdc)DC Current Gain (I C = -0.1mAdc, V CE = -1.0Vdc)(I C = -10mAdc, V CE = -1.0Vdc)(I C = -1.0mAdc, V CE = -1.0Vdc)V (BR)CEO -40-Vdc V (BR)CBO -40-Vdc V (BR)EBO-5.0-Vdc I CEXI BEV --0.1--0.1hFE30--60-100-100300uAdcuAdc Symbol Min Max Unit(I C = -150mAdc, V CE = -2.0Vdc)Collector-Emitter Saturation Voltage (1) (I C = -150mAdc, I B = -15mAdc)(I C = -500mAdc, I B = -50mAdc)(I C = -500mAdc, V CE = -2.0Vdc)Vdc V CE(sat)20---0.4--0.75VdcV BE(sat)-0.75-0.95--1.3Base-Emitter Saturation Voltage (1) (I C = -150mAdc, I B = -15mAdc)(I C = -500mAdc, I B =-50mAdc)SMALL-SIGNAL CHARACTERISTICSSWITCHING CHARACTERISTICSf T 200-MHz Current-Gain-Bandwidth Product (I C = -20mAdc, V CE = -10Vdc, f= 100MHz)C cb C eb -8.5pF pF t d t r t s t f----nsnsh ie -301.515kohms h re 0.18.060500X 10-4h fe 1.0100-h oe225301520umhosOutput Capacitance (V CB = -10Vdc, I E = 0, f= 1.0MHz)Input Capacitance (V EB = -0.5Vdc, I C = 0, f= 1.0MHz)Voltage Feedback Ratio (V CE = -10Vdc, I C = -1.0mAdc, f= 1.0kHz)Output Admittance (V CE = -10Vdc, I C = -1.0mAdc, f= 1.0kHz)(V CC = -30Vdc, V EB = -2.0Vdc, I C = -150mAdc, I B1= -15mAdc)(V CC = -30Vdc, I C = -150mAdc, I B1= I B2= -15mAdc)Input lmpedance (V CE = -10Vdc, I C = -1.0mAdc, f= 1.0kHz)Small-Signal Current Gain (V CE = -10Vdc, I C = -1.0mAdc, f= 1.0kHz)Delay Time Rise Time Storage Time Fall TimeNote :Pulse Test: Pulse Width <300ms,Duty Cycle <2.0%--RATING AND CHARACTERISTICS CURVES ( )Figure 1. CapacitancesFigure 3. Turn-On TimeFigure 5. Storage Time0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 10 20 3010 20 30 50 70 100 200 300 500C A P A C I T A N C E (p F )t s ',S T O R A G E T I M E (n s )t , T I M E (n s )t , T I M E (n s )Q , C H A R G E (n C )REVERSE VOLTAGE (V)I C ,COLLECTOR CURRENT (mA)I C , COLLECTOR CURRENT (mA)I C ,COLLECTOR CURRENT (mA)Figure 4. Rise Times10203050701007.05.010 20 30 50 70 100 200 300 50010 20 30 50 70 100 200 300 500I C ,COLLECTOR CURRENT (mA)10 20 30 50 70 100 200 300 500Figure 2. Charge Data0.20.30.50.71.0100.12.03.05.07.025OC100O C2N4403RATING AND CHARACTERISTICS CURVES ()h o e , O U T P U T A D M I T T A N C E (u m h o s )h r e , V O L T A G E F E E D B A C K R A T I O (X 10-4)0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 100.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 1050 100 200 500 1.0k 2.0k 5.0k 10k 20k 50kN F , N O I S E F I G U R E (d B )N F ,N O I S E F I G U R E (d B )Figure 6.Frequency EffectsI C , COLLECTOR CURRENT (mAdc)I C , COLLECTOR CURRENT (mAdc)Figure 8.Cuttent GainFigure 9.Input ImpedanceR S , SOURCE RESISTANCE (OHMS)Figure 7.Source Resistance EffectsI C , COLLECTOR CURRENT (mAdc)I C , COLLECTOR CURRENT (mAdc)Figure 11.Temperature CoefficientsFigure 10.Voltage Feedback Ratio 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 100.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10f, FREQUENCY (KHz)46810200.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100V CE = -10Vdc, T A = 25CBandwidth = 1.0Hz2N4403RATING AND CHARACTERISTICS CURVES ()Figure 12. DC Current GainFigure 13. Collector Saturation RegionFigure 14. "ON" Voltages Figure 15. Temperature Coefficients0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 300 5000.005 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 500.1 0..2 0.5 1.0 2.0 5.0 10 20 50 100 200 5000.1 0..2 0.5 1.0 2.0 5.0 10 20 50 100 200 500h F E , N O R M A L I Z E D C U R R E N T G A I NV C E , C O L L E C T O R - E M I T T E R V O L T A G E (V )V O L T A G E (V )C O E F F I C I E N T (m V /OC )I C , COLLECTOR CURRENT (mA)I B , BASE CURRENT (mA)I C , COLLECTOR CURRENT (mA)I C , COLLECTOR CURRENT (mA)0.40.60.81.00.20.30.50.71.03.00.22.030442NRectron Inc reserves the right to make changes without notice to any productspecification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit.Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures.DISCLAIMER NOTICE。