AG配置脚本(带从框)

AG配置脚本（不带从框）
一、打补丁 (1)
二、业务配置 (2)
三、配置带外网管 (10)
四、查看配置数据 (11)
一、打补丁
undo ip_address (删除IP地址)
huawei(interface-eth)#ip modify(修改IP)
switch language-mode(语言倒换)
system switch-over(主备倒换)
uplink tps on (打开备板网口)
config (进入全局配置）
sysname DJ_JC_AG1
frame add 0 添加筐
0 (HABA) 选择筐的型号
frame add 1
8 (HABA) 1框选择8
frame connect 0 1 (把两个框进行级联）
display ip address
Interface eth(修改IP业务地址）
Ip modify 172.20.1.2 ip_address 10.47.13.12 submask 255.255.255.192 gateway 10.47.13.1 vlan 3702
quit
up-linkport set workmode
{ workmode<E><ETH1,FE-O,GE-O> }:ETH1 display working mode
load patch tftp 10.47.13.1 HP0001
patch activate HP0001
patch run HP0001
load patch tftp 10.47.13.1 HP0003
patch activate HP0003
patch run HP0003
load patch tftp 10.47.13.1 HP0004
patch activate HP0004
patch run HP0004
load patch tftp 10.47.13.1 HP0005
patch activate HP0005
patch run HP0005
display patch all
二、业务配置
snmp-agent local-engineid 800007DB03001882BEE05F snmp-agent community read public
snmp-agent community write private
snmp-agent sys-info contact slkag1
snmp-agent sys-info version v1
snmp-agent target-host trap address 132.119.126.200 securityname private v1 snmp-agent trap enable standard
board batadd 0/6 0/16 a32
board batadd 0/18 0/35 a32
board add 0/17 tss
board confirm 0
board confirm 1
test
testgroup set 0/17
quit
frame set 0 testgroup 0
autosave interval on
autosave interval 1440
oversea parameters 34 1
oversea parameters 27 1
oversea parameters 3 500
oversea parameters 4 100
fax parameters tranmode 2
qos threshold jitter 20 loopdelay 100 packetlost 1
alarm alarmlevel 0x1c100007 major
qos ip 10.47.13.12 strategy none
interface h248 0
y
if-h248 attribute mgip 10.47.13.12mgport 2944 mg-media-ip 10.47.13.12transfer udp mgcip_1 10.47.20.102 mgcport_1 2944
if-h248 attribute start-negotiate-version 1
if-h248 attribute domainName xgdlag2 deviceName xgdlag2
reset coldstart
y
quit
esl user
mgpstnuser batadd 0/6/0 0/35/31 0 terminalid 0
pstnport attribute batset 0/6/15 0/6/16 polarity-reverse support
pstnport attribute batset 0/7/15 0/7/16 polarity-reverse support
pstnport attribute batset 0/8/15 0/8/16 polarity-reverse support
pstnport attribute batset 0/9/15 0/9/16 polarity-reverse support
pstnport attribute batset 0/10/15 0/10/16 polarity-reverse support
pstnport attribute batset 0/11/15 0/11/16 polarity-reverse support
pstnport attribute batset 0/12/15 0/12/16 polarity-reverse support
pstnport attribute batset 0/13/15 0/13/16 polarity-reverse support
pstnport attribute batset 0/14/15 0/14/16 polarity-reverse support
pstnport attribute batset 0/15/15 0/15/16 polarity-reverse support
pstnport attribute batset 0/16/15 0/16/16 polarity-reverse support
pstnport attribute batset 0/18/15 0/18/16 polarity-reverse support
pstnport attribute batset 0/19/15 0/19/16 polarity-reverse support
pstnport attribute batset 0/20/15 0/20/16 polarity-reverse support pstnport attribute batset 0/21/15 0/21/16 polarity-reverse support pstnport attribute batset 0/22/15 0/22/16 polarity-reverse support pstnport attribute batset 0/23/15 0/23/16 polarity-reverse support pstnport attribute batset 0/24/15 0/24/16 polarity-reverse support pstnport attribute batset 0/25/15 0/25/16 polarity-reverse support pstnport attribute batset 0/26/15 0/26/16 polarity-reverse support pstnport attribute batset 0/27/15 0/27/16 polarity-reverse support pstnport attribute batset 0/28/15 0/28/16 polarity-reverse support pstnport attribute batset 0/29/15 0/29/16 polarity-reverse support pstnport attribute batset 0/30/15 0/30/16 polarity-reverse support pstnport attribute batset 0/31/15 0/31/16 polarity-reverse support pstnport attribute batset 0/32/15 0/32/16 polarity-reverse support pstnport attribute batset 0/33/15 0/33/16 polarity-reverse support pstnport attribute batset 0/34/15 0/34/16 polarity-reverse support pstnport attribute batset 0/35/15 0/35/16 polarity-reverse support pstnport reversepole_pulse batset 0/6/15 0/6/16 100 enable pstnport reversepole_pulse batset 0/7/15 0/7/16 100 enable pstnport reversepole_pulse batset 0/8/15 0/8/16 100 enable pstnport reversepole_pulse batset 0/9/15 0/9/16 100 enable pstnport reversepole_pulse batset 0/10/15 0/10/16 100 enable pstnport reversepole_pulse batset 0/11/15 0/11/16 100 enable
pstnport reversepole_pulse batset 0/12/15 0/12/16 100 enable pstnport reversepole_pulse batset 0/13/15 0/13/16 100 enable pstnport reversepole_pulse batset 0/14/15 0/14/16 100 enable pstnport reversepole_pulse batset 0/15/15 0/15/16 100 enable pstnport reversepole_pulse batset 0/16/15 0/16/16 100 enable pstnport reversepole_pulse batset 0/18/15 0/18/16 100 enable pstnport reversepole_pulse batset 0/19/15 0/19/16 100 enable pstnport reversepole_pulse batset 0/20/15 0/20/16 100 enable pstnport reversepole_pulse batset 0/21/15 0/21/16 100 enable pstnport reversepole_pulse batset 0/22/15 0/22/16 100 enable pstnport reversepole_pulse batset 0/23/15 0/23/16 100 enable pstnport reversepole_pulse batset 0/24/15 0/24/16 100 enable pstnport reversepole_pulse batset 0/25/15 0/25/16 100 enable pstnport reversepole_pulse batset 0/26/15 0/26/16 100 enable pstnport reversepole_pulse batset 0/27/15 0/27/16 100 enable pstnport reversepole_pulse batset 0/28/15 0/28/16 100 enable pstnport reversepole_pulse batset 0/29/15 0/29/16 100 enable pstnport reversepole_pulse batset 0/30/15 0/30/16 100 enable pstnport reversepole_pulse batset 0/31/15 0/31/16 100 enable pstnport reversepole_pulse batset 0/32/15 0/32/16 100 enable pstnport reversepole_pulse batset 0/33/15 0/33/16 100 enable pstnport reversepole_pulse batset 0/34/15 0/34/16 100 enable
pstnport reversepole_pulse batset 0/35/15 0/35/16 100 enable pstnport attribute batset 0/10/0 0/13/31 polarity-reverse support pstnport reversepole_pulse batset 0/10/0 0/13/31 100 enable mgpstnuser batadd 1/6/0 1/35/31 0 terminalid 928
pstnport attribute batset 1/6/15 1/6/16 polarity-reverse support pstnport attribute batset 1/7/15 1/7/16 polarity-reverse support pstnport attribute batset 1/8/15 1/8/16 polarity-reverse support pstnport attribute batset 1/9/15 1/9/16 polarity-reverse support pstnport attribute batset 1/10/15 1/10/16 polarity-reverse support pstnport attribute batset 1/11/15 1/11/16 polarity-reverse support pstnport attribute batset 1/12/15 1/12/16 polarity-reverse support pstnport attribute batset 1/13/15 1/13/16 polarity-reverse support pstnport attribute batset 1/14/15 1/14/16 polarity-reverse support pstnport attribute batset 1/15/15 1/15/16 polarity-reverse support pstnport attribute batset 1/16/15 1/16/16 polarity-reverse support pstnport attribute batset 1/17/15 1/17/16 polarity-reverse support pstnport attribute batset 1/18/15 1/18/16 polarity-reverse support pstnport attribute batset 1/19/15 1/19/16 polarity-reverse support pstnport attribute batset 1/20/15 1/20/16 polarity-reverse support pstnport attribute batset 1/21/15 1/21/16 polarity-reverse support pstnport attribute batset 1/22/15 1/22/16 polarity-reverse support
pstnport attribute batset 1/23/15 1/23/16 polarity-reverse support pstnport attribute batset 1/24/15 1/24/16 polarity-reverse support pstnport attribute batset 1/25/15 1/25/16 polarity-reverse support pstnport attribute batset 1/26/15 1/26/16 polarity-reverse support pstnport attribute batset 1/27/15 1/27/16 polarity-reverse support pstnport attribute batset 1/28/15 1/28/16 polarity-reverse support pstnport attribute batset 1/29/15 1/29/16 polarity-reverse support pstnport attribute batset 1/30/15 1/30/16 polarity-reverse support pstnport attribute batset 1/31/15 1/31/16 polarity-reverse support pstnport attribute batset 1/32/15 1/32/16 polarity-reverse support pstnport attribute batset 1/33/15 1/33/16 polarity-reverse support pstnport attribute batset 1/34/15 1/34/16 polarity-reverse support pstnport attribute batset 1/35/15 1/35/16 polarity-reverse support pstnport reversepole_pulse batset 1/6/15 1/6/16 100 enable pstnport reversepole_pulse batset 1/7/15 1/7/16 100 enable pstnport reversepole_pulse batset 1/8/15 1/8/16 100 enable pstnport reversepole_pulse batset 1/9/15 1/9/16 100 enable pstnport reversepole_pulse batset 1/10/15 1/10/16 100 enable pstnport reversepole_pulse batset 1/11/15 1/11/16 100 enable pstnport reversepole_pulse batset 1/12/15 1/12/16 100 enable pstnport reversepole_pulse batset 1/13/15 1/13/16 100 enable pstnport reversepole_pulse batset 1/14/15 1/14/16 100 enable
pstnport reversepole_pulse batset 1/15/15 1/15/16 100 enable pstnport reversepole_pulse batset 1/16/15 1/16/16 100 enable pstnport reversepole_pulse batset 1/17/15 1/17/16 100 enable pstnport reversepole_pulse batset 1/18/15 1/18/16 100 enable pstnport reversepole_pulse batset 1/19/15 1/19/16 100 enable pstnport reversepole_pulse batset 1/20/15 1/20/16 100 enable pstnport reversepole_pulse batset 1/21/15 1/21/16 100 enable pstnport reversepole_pulse batset 1/22/15 1/22/16 100 enable pstnport reversepole_pulse batset 1/23/15 1/23/16 100 enable pstnport reversepole_pulse batset 1/24/15 1/24/16 100 enable pstnport reversepole_pulse batset 1/25/15 1/25/16 100 enable pstnport reversepole_pulse batset 1/26/15 1/26/16 100 enable pstnport reversepole_pulse batset 1/27/15 1/27/16 100 enable pstnport reversepole_pulse batset 1/28/15 1/28/16 100 enable pstnport reversepole_pulse batset 1/29/15 1/29/16 100 enable pstnport reversepole_pulse batset 1/30/15 1/30/16 100 enable pstnport reversepole_pulse batset 1/31/15 1/31/16 100 enable pstnport reversepole_pulse batset 1/32/15 1/32/16 100 enable pstnport reversepole_pulse batset 1/33/15 1/33/16 100 enable pstnport reversepole_pulse batset 1/34/15 1/34/16 100 enable pstnport reversepole_pulse batset 1/35/15 1/35/16 100 enable quit
环境监控
emu add 0 h303ESC 0 30 rs232 emu1
interface emu 0
esc fan on
esc fan automatic
esc digital 1 available-level high-level
esc digital 2 digital-alarm 13
esc digital 2 available-level low-level
esc digital 4 digital-alarm 13
esc digital 4 available-level low-level
quit
三、配置带外网管
interface outband
ip address 16.119.181.105 255.255.255.0 16.119.181.1
y
quit
sysman mode outband
进入超级模式添加路由
UA5000(diagnose)%%outband
{ route<K> }:route
{ add<K>|delete<K> }:add
{ ip_address<I><X.X.X.X> }:132.119.126.200 /* 网管服务器地址*/ { submask<M><X.X.X.X> }:255.255.255.0
UA5000(diagnose)%%su
Challenge:D0FMUEIN
Please input password:5-FvG151
CQ_XC_AG1(su)%%outband
{ disable<K>|enable<K> }:enable
{ standby<K> }:standby
outband enable standby
save
当保存重启完之后开始测试业务：
ping 132.119.126.200 (在进行网管测试时，网管模式必须是带外模式outband) ping 10.47.12.1 (在进行业务测试时，网管模式必须是带内模式inband)
四、查看配置数据
display ip address 查看IP地址
display if-h248 all 查看MG接口配置
display sysman mode 查看网管模式
display patch all 查看补丁
display version 0/4 查看0筐4槽主板信息
display version 0/5 查看0筐5槽备板信息
display mgpstnuser 0 0 2000 查看所有用户端口
display fax parameters 查看AFX参数
narrow resource 查看扣板
dis dsp state 0/4/0/0
dis dsp staye 0/5/0/0
display time
display ip address
display sysuptime
display fe active eth1 display fe standby eth1
display frame info
display board 0
display terminal user all display autosave configuration display version 0/0
display version 0/4
display version 0/5
display version 0/6
display version 0/17
display version 0/15
display version 0/16
display emu 0
interface emu 0
display esc environment info
quit
display language
display patch all
display if-h248 all
interface h248 0
display if-h248 state
display mg-software parameter 0 display if-h248 attribute
quit
display runstat callInfo
display dsp attribute
narrow resource
display dsp state 0/4/0
display dsp state 0/5/0
quit
display fax parameters
display modem parameters
esl user
display mgpstnuser 0 0 2000 display port state 0/6
display pstnport attribute 0/6
quit
display sysman mode
display data sync state
display oversea parameters 4 display oversea parameters 34 display oversea parameters 27。