安徽电信ISAM-V FD 工程配置文档

安徽电信(蚌埠)ISAM-V FD 工程配置文档
编制Prepare: 董阳
审核 Review:
批准 Approve:
目录Contents
1．工程概述 (3)
2．硬件配置及网络拓扑 (4)
3．ISAM-V开局步骤 (4)
3.1 典型IP地址、VLAN规划 (4)
3.2 nant-a板配置 (4)
3.3 NVPS板配置 (5)
1．工程概述
安徽电信ISAM-V FD subrack configuration。

2．硬件配置及网络拓扑
3．ISAM-V 开局步骤
3.1 典型IP 地址、VLAN 规划
3.2 NANT-A 板配置
3.2.1 主框配置
1． 配置板卡
isadmin># configure equipment slot 1/1/1 planned-type nvps-a isadmin># configure equipment slot 1/1/2 planned-type nvps-a isadmin># configure equipment slot 1/1/[3…5] planned -type npot-a 2． 配置管理地址、网关
isadmin># configure system single-public-ip
isadmin># configure system management host-ip-address manual:10.26.32.163/29 isadmin># configure system management default-route 10.26.32.161
FD ISAMV
ZXSS10
3．打开所有相关端口
isadmin># configure interface shub port 0 port-type network
isadmin># configure interface shub port 0 admin-status auto-up //uplink port 0连接MGC isadmin># configure interface shub port 1 port-type network
isadmin># configure interface shub port 1 admin-status auto-up
4．配置管理VLAN并将port 0加入管理VLAN中
isadmin>#configure vlan shub id 4093 egress-port lt:1/1/[1,2] //NVPS插在LT1，2槽isadmin># configure vlan shub id 4093 egress-port network:0
5．配置MEGACO VLAN
isadmin># configure vlan shub id 201 mode residential-bridge
isadmin># configure vlan shub id 201 egress-port lt:1/1/[1,2]
isadmin># configure vlan shub id 201 egress-port network:0
6．配置RTP VLAN
isadmin># configure vlan shub id 202 mode voice-vlan
isadmin># configure vlan shub id 202 egress-port lt:1/1/[1...8]
isadmin># configure vlan shub id 202 egress-port lt:1/1/[12...19]
isadmin># configure vlan shub id 202 egress-port network:0
7．配置主框Node1的IP地址和网关
isadmin>#configure ip shub vrf 2 fast-path-mode:ena-user-user-com name voice
isadmin># configure interface shub vlan-id 202
isadmin># configure interface shub ip202
isadmin># configure interface shub ip 202 vrf-id 2
isadmin># configure interface shub ip 202 ip-addr 10.26.32.155/29
isadmin># configure interface shub vlan-id 202 admin-status up
isadmin># configure ip shub vrf 2 route-dest 0.0.0.0/0 next-hop 10.26.32.153 vlan 202 8．保存SHUB配置
isadmin># admin software-mngt shub database save
3.2.1 配置network 1镜像network 0
telnet shub (root/admin123)
cd /iss
/iss# mirror enable
cd /eth23 (root/admin123)
/eth23# iss mirror egress enable
/eth23# iss mirror-ingress enable
cd /iss
/iss# mirror port 23
3.3 NVPS板配置
3.3.1 用GiCi Box连接NVPS板或用Dostopus.exe登陆到NT板配置数据.
1. 配置NVPS管理地址
ip apconfig add 10.26.32.162 1 netmask 255.255.255.248
ip route add 0.0.0.0 10.26.32.161 .0.0.0.0 20
查看配置
ip apconfig
--------------------------------------------
3.3.2 通过CT配置IVPS数据
通过CT来配置ISAMV详细操作请参考《通过CT配置IVPS.doc》。

3.3.3 ISAMV上配置特殊MGC的操作配置
mgcm>set mgi bengbu1 -lock
Updating Media Gateway Interface 'bengbu1' (Id = 1)
[OK]
mgcm>set mgi bengbu1
ERROR: no parameter to update was given.
mgcm update mediaGatewayItf <mgiName>
[ -ip <medGwyIPAddress> ]
(Note:modify mgi IP,IVPS will restart)
[ -vlan <medGwyVLAN> ]
[ -csid <mgcCallServerId> ]
[ -cpip <mgcPrimaryIPAddress> ]
[ -cpport <mgcPrimaryUDPPort> ]
[ -csip <mgcSecondaryIPAddress> ]
[ -csport <mgcSecondaryUDPPort> ]
[ -snmask <medGwySubnetMask> ]
[ -nexthop <medGwyNextHop> ]
[ -mgctype <mgcType> ]
[ reference value: 1 general, 2 lucent-fs5000 ]
[ 3 alcatel-a5020, 4 alcatel-e10 ]
[ 5 zte-zxss, 6 hw-soft3000 ]
[ 7 simens, 8 nortel ]
[ 9 ericsson, 10 other-vendor ]
[ 11 other-vendor, 12 other-vendor ]
[ -lock | -unlock ]
mgcm>set mgi bengbu1 -mgctype 5 -unlock
Updating Media Gateway Interface 'bengbu1' (Id = 1)
[OK]
查看配置mgcm>show mgi bengbu1
文件结束
End of file。