2021 Honda Odyssey 车座调节说明书

The controls for the adjustable driver’s power seat are on the outside edge of the seat bottom. You can adjust the power seat with the ignition switch in any position. Make all seat adjustments before you start driving.
To change the lumbar support, move
the lever on the right side of the seat-back forward or backward.Keep moving the lever forward or backward until you find a suitable position.
The passenger’s seat has two switches. One moves the seat forward and backward, and the other raises and lowers the seat.
See pages for important safety information and warnings about how to properly position seats and seat-backs.
U.S.EX,EX-L,LX-V6and EX-V6Canadian EX-L,SE-V6and LX-V6
1413U.S.EX-V6
Canadian EX-V6
U.S.EX,EX-L and EX-V6Canadian EX-L and EX-V6
Power Seat Adjustment
Driver’s Lumbar Support
Instruments and Controls
The height of your driver’s seat is adjustable.To raise the seat bottom,repeatedly pull up the lever on the outside of the seat cushion.To lower the seat,push the lever down repeatedly.
To adjust the seat forward or
backward,pull up on the bar under the seat cushion’s front edge.Move the seat to the desired position,and release the bar.Try to move the seat to make sure it is locked in position.
U.S.VP and SE
Canadian DX-G and SE
Front Seat Adjustments
Driver’s Seat Manual Height Adjustment
The height of your driver’s seat is power adjustable. Pull up on the switch to raise the seat. Push it down to lower the seat.Make all adjustments before you start driving.
They are most effective when you adjust them so the back of the occupant’s head rests against the center of the restraint.The front and rear head restraints adjust for height. You need both hands to adjust the restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button and push the restraint down.
U.S.EX
Canadian EX-L,SE-V6and EX-V6
Driver’s Seat Power Height Adjustment
Instruments and Controls
The back of the rear seat folds down, giving you direct access to the trunk. The seat-back can be released from inside the vehicle or inside the trunk. To fold down the seat-back from inside the vehicle,insert the master key in the lock on the rear shelf. Turn the key clockwise,pull down the top of the seat-back,then release the key.To release the seat-back from inside the trunk,pull the release loop under the trunk panel.
To lock the seat-back upright,push it firmly against the trunk panel.Make sure it is latched in place by pulling on the top of the seat.
Folding Rear Seat
Make sure all rear shoulder belts are positioned in front of the rear seat-back whenever the seat-back is in its upright position.
Make sure all items in the trunk, or items extending through the opening into the back seat, are secured. Loose items can fly forward and cause injury if you have to brake hard. See on page .
Never drive with the seat-back folded down and the trunk lid open. See on page .For security, this cover can be locked and unlocked only with the master key. To lock the cover, insert the key and turn it clockwise.
Never drive with this cover open and the trunk lid open.
See on page.
5252
164
Carrying Cargo
Carbon Monoxide Hazard Carbon Monoxide Hazard Instruments and
Controls。