改进Hopkinson拉杆加载CT试样断裂数值模拟
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
改进Hopkinson拉杆加载CT试样断裂数值模拟
邹广平;沈昕慧;吴立夫;唱忠良;杨丽红
【期刊名称】《哈尔滨工业大学学报》
【年(卷),期】2016(048)010
【摘要】To study the dynamic fracture performance about the compact tension( CT) specimen, the split Hopkinson bar was improved, and a kind of clamping device between the loading point of incident bar and transmission bar was designed to study the dynamic fracture test on the CT specimen. In terms of tensile stress wave propagation, the finite element method based on ANSYS/LS⁃DYNA had been adopted to realize the dynamic fracture response and calculate the relative parameters about the dynamic fracture toughness. The result shows that, the stress distribution in the CT specimens from the asymmetric state to the symmetric distribution needs about 80 μs, and then stress distrib ution cloud in the specimen becomes symmetric and the stresses on two points become equal. Thus the CT specimens come to the balance state, meeting the dynamic fracture toughness test requirements. The effect of the chuck section and the pin diameter on the stress wave propagation and stress balance was studied, which will provide the basis for the further research on the Hopkinson tensile bar and the dynamic fracture test on the CT specimens.%为研究紧凑拉伸( CT)试样的动态断裂性能,将分离式Hopkinson拉杆进行了改进,在入射杆与透射杆的加载端设计了一种夹持装置,
实现了CT试样的动态断裂测试。
采用ANSYS/LS-DYNA数值分析程序,对拉
伸应力波加载下,基于改进后Hopkinson拉杆系统的CT试样动态断裂测试过程
进行了数值模拟研究,得出CT试样的动态断裂响应,计算了表征其动态断裂韧性的相关参量。
结果表明,试样中应力分布由非对称状态经约80μs达到对称分布状态,此后试样应力分布云图对称,两端加载点载荷相等,试样达到应力平衡状态,满足了Hopkinson杆断裂韧性测试要求,并讨论了夹头截面突变与销钉直径对应力波传播和试样应力平衡的影响,为后续Hopkinson拉杆装置继续改进与CT试
样动态断裂测试提供了依据。
【总页数】6页(P142-147)
【作者】邹广平;沈昕慧;吴立夫;唱忠良;杨丽红
【作者单位】哈尔滨工程大学航天与建筑工程学院,哈尔滨150001;哈尔滨工程
大学航天与建筑工程学院,哈尔滨150001;哈尔滨工程大学航天与建筑工程学院,哈尔滨150001;哈尔滨工程大学航天与建筑工程学院,哈尔滨150001;哈尔滨工
程大学航天与建筑工程学院,哈尔滨150001
【正文语种】中文
【中图分类】O347.3
【相关文献】
1.CT试样焊缝界面裂纹蠕变断裂参量估算的数值模拟研究 [J], 郑占军;胡兆吉;余
珂
2.SHTB加载紧凑拉伸试样断裂韧性测试仿真 [J], 邹广平;沈昕慧;赵伟玲;吴立夫;
唱忠良
3.HOPKINSON冲击拉杆的改进及应用 [J], 宋顺成;田时雨
4.基于NSCB石灰岩试样的加载速率和尺寸效应对其断裂韧度的影响研究 [J], 张盛;王东坤;王龙飞;王小良;乔洋
5.紧凑拉伸断裂韧性试样加载线位移推算方法的对比分析 [J], 林虎;佟振峰;鱼滨涛;张长义;宁广胜;钟巍华;杨文
因版权原因,仅展示原文概要,查看原文内容请购买。