德国螺栓标准对照码
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
螺栓
•焊接螺栓Weld screws with metric head
DIN 34817
•方头凸缘螺栓Squate head bolts with collar
DIN 478
•平圆头方颈螺栓Mushroom head square neck bolts
DIN 603
•沉头带榫螺栓Flat countersunk nib bolts
DIN 604
•沉头高方颈螺栓Flat countersunk square neck bolts with long square
DIN 605
•半圆头带榫螺栓Cup head nib bolts
DIN 607
•沉头短方颈螺栓Flat countersunk square neck bolts with short square
DIN 608
•六角花形大法兰面钢制螺栓Steel hexalobular head bolts with large flange
DIN 34801
•六角头铰制孔用螺栓Hexagon fit bolts
DIN 609
•M42-M160*6 六角头螺栓—产品等级B级M42 to M160*6 hexagon head bolts - Product grade B
DIN 931-2
•六角法兰面螺栓—小系列Hexagon bolts with flange - Small series
DIN EN 1662
•六角法兰面螺栓—加大系列Hexagon bolts with flange - Heavy series
DIN EN 1665 | 代替DIN 6921|DIN 6922
•六角头螺栓—－产品等级B级－细杆（杆径近似等于中径）Hexagon head bolts with reduced shank(shank diameter=pitch diameter)-Product grade B
DIN EN 24015
•六角头螺栓—产品等级A和B级Hexagon head bolts - Product grades A and B
DIN EN ISO 4014 | 代替DIN 931-1
•六角头螺栓—产品等级C级Hexagon head bolts - Product grade C
DIN EN ISO 4016 | 代替DIN 601
•六角头螺栓—全螺纹—产品等级A和B级Hexagon head screws - Product grade A and B DIN EN ISO 4017 | 代替DIN 933
•六角头螺栓—全螺纹—产品等级C级Hexagon head screws - Product grade C
DIN EN ISO 4018 | 代替DIN 558
•六角头螺栓—细牙—全螺纹—产品等级A和B级Hexagon head screws with metric fine pitch thread - Product grade A and B
DIN EN ISO 8676 | 代替DIN 961
•六角头螺栓—细牙—产品等级A和B级Hexagon head bolts with fine pitch thread - Product grades A and B
DIN EN ISO 8765 | 代替DIN 960
•钢结构用—大六角头高强度螺栓High-strength hexagon head bolts with large widths
across flats for structural steel bolting
DIN 6914
•短螺纹端的六角头铰制孔用螺栓
DIN 610-84
•粗杆六角头螺栓重量
DIN 931-87(3)
•Clevis pins
DIN 1445
•Plain washers for metric bolts,screws and nuts .for general purposes General plan
DIN EN ISO 887
•Hexagon head bolts with metric fine pitch thread(Product grade A and B)
DIN EN ISO 8765
•Thread run-outs and thread undercuts for ISO metric threads as in IND 13-1
DIN 76-1
•Thread run-outs and thread undercuts
DIN 76
•Bolt end protrusions
DIN 78
•Diameters of counterbores(holes)
DIN 974
•Split pin holes and wire holes in bolts,screws and studs
DIN 34803
•Bolts,screws,studs and nuts
DIN EN 20225
•Clearance holes for bolts and screws
DIN EN 20273
•T形头螺栓ISO general purpose metric screw threads. General plan
DIN ISO 261
•一般用途螺栓和螺钉.米制系列.端头半径General purpose bolts and screws-metric series DIN ISO 885
•T型螺栓
188
•T型螺栓
186
本文版权所属标准件之都网，如需转载、摘编或以其它方式使用本文内容，请在授权范围内使用，并标注“来源：标准件之都”。